Instruction Manual
ENG
DIGITAL HOME
THEATER SYSTEM
HT-X200
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
Samsung Electronics America, Inc.
1-800-SAMSUNG (7267864)
www.samsung.com
COMPACT
AH68-01963R
REV : 00
Downloaded From TheatreSystem-Manual.com Manuals
DIGITAL AUDIO
Safety Warnings
CAUTION
Precautions
Important Safety Instructions
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important instructions
accompanying the product.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
2.7 inch
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below. Keep
these operating instructions handy for future
reference.
1) Read these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in
accordance with the manufacturer's instructions.
9) Do not defeat the safety purpose of the polarized or
grounding- type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.
Note to CATV system installer
11) Only use attachments/accessories specified by
the manufacturer.
To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture.
CAUTION
Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall
be placed on the apparatus.
Downloaded
From TheatreSystem-Manual.com Manuals
2
3.9 inch
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player
horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are not
covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot.
Before moving the player, ensure the Disc Insert Hole is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove
the main plug from the wall outlet, especially when left unused for a long period of time.
8) Do not install near any heat sources such as
radiators, heat registers, or other apparatus (including
amplifiers) that produce heat.
CAUTION : INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
WARNING
3.9 inch
2) Keep these instructions.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
This reminder is provided to call the CATV system
installer’s attention to Section 820~40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall
be connected to the grounding system of the building,
as close to the point of cable entry as practical.
3.9 inch
PREPARATION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE REAR COVER (or BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
ENG
12) Use only with the cart, stand,
tripod, bracket, or table specifi ed
by the manufacturer, or sold
with the apparatus. When a cart
is used, use caution when moving
the cart/ apparatus combination to avoid injury from
tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus. Service is also required
if the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
During thunderstorms, disconnect the AC main plug from
the wall outlet.
Voltage peaks due to lightning could damage the unit.
The Mains plug is used as a disconnect device and shall
stay readily operable at any time.
Do not expose the unit to direct sunlight or other heat sources.
This could lead to overheating and malfunction of the unit.
Phones
Protect the player from moisture (i.e. vases) , and excess heat
(e.g.fireplace) or equipment creating strong magnetic or electric
fields (i.e.speakers...). Disconnect the power cable from the AC
supply if the player malfunctions. Your player is not intended for
industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc has been stored
in cold temperatures.
If transporting the player during the winter, wait approximately 2
hours until the unit has reached room temperature before using.
The batteries used with this product contain chemicals that are
harmful to the environment.
Do not dispose of batteries in the general household trash.
3
Features
Contents
ENG
PREPARATION
SETUP
The HT-X200 combines the convenience of multi-disc playback capability, including DVD-AUDIO, DVD-VIDEO, CD,
MP3-CD, WMA-CD, DivX, CD-R/RW, and DVD R/RW, with a sophisticated FM tuner, all in a single player.
Safety Warnings.............................................................2
Settings........................................................................40
Setting the Language.............................................40
Setting TV Screen type ..........................................41
Setting Parental Controls (Rating Level)................42
Setting the Password .............................................42
Setting the Wallpaper.............................................43
To Select One of the 3 Wallpaper Settings
you've made...........................................................43
DVD Playback Mode ..............................................44
DivX (R) registration...............................................44
DVD-Audio compatible
Experience the super high-quality audio performance of DVD-Audio.
The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound quality in terms of dynamic range,
low-level resolution and high-frequency detail.
USB Host support
You can connect and play files from external USB storage devices such as MP3 players, USB flash memory, etc. using
the Home Theater's USB HOST function.
Precautions....................................................................3
Features.........................................................................4
Notes on Discs ..............................................................6
Description.....................................................................8
CONNECTIONS
Connecting the Speakers ............................................12
Installing the Main Unit ................................................14
Connecting the Video Out to your TV..........................16
TV Screen Saver Function
If the main unit remains in Stop mode for 3 minutes, the Samsung logo appears on TV screen.
The HT-X200 automatically switches itself into the power saving mode after 20 minutes in the Screen Saver mode.
PREPARATION
Multi-Disc Playback & FM Tuner
Setting the DRC (Dynamic Range Compression) ...45
Setting the AV SYNC .............................................45
Setting the HDMI Audio .........................................46
HDMI Function.............................................................17
Connecting Audio from External Components ............18
Connecting the FM Antenna........................................20
MISCELLANEOUS
Listening to Radio........................................................47
Power Saving Function
The HT-X200 automatically shuts itself off after 20 minutes in Stop mode.
Customized TV Screen Display
The HT-X200 allows you to select your favorite image during JPEG, DVD playback and set it as your background wallpaper.
HDMI
HDMI transmits DVD video and audio signals simultaneously, and provides a clearer picture.
Anynet+(HDMI-CEC) Function
Anynet+ is a function that can be used to operate the main unit using a Samsung TV remote control, by connecting the
Home Theater to a SAMSUNG TV using an HDMI Cable. (This is only available with SAMSUNG TVs that support
Anynet+.)
Downloaded
From TheatreSystem-Manual.com Manuals
4
OPERATION
Before Reading the User's Manual..............................21
Before Using Your Home Theater ................................22
Disc Playback ..............................................................23
MP3/WMA-CD Playback..............................................24
JPEG File Playback .....................................................25
DivX Playback..............................................................26
Using the Playback Function....................................... 28
Displaying Disc Information ....................................28
Checking the Remaining Time................................29
Fast Playback .........................................................29
Slow Playback.........................................................29
Skipping Scenes/Songs..........................................30
Repeat Playback.....................................................31
To Select a Repeat Playback Mode in the Disc
Information Screen .................................................31
A-B Repeat Playback..............................................32
Step Function..........................................................32
Angle Function........................................................33
Zoom (Screen Enlarge) Function ...........................33
EZ VIEW Function ..................................................34
Bonus Group...........................................................34
Navigating Pages....................................................34
Audio Language Selection Function.......................35
Subtitle Language Selection Function....................35
Moving Directly to a Scene/Song ...........................36
Using the Disc Menu...............................................37
Using the Title Menu...............................................37
Playing Media Files using the USB Host feature ........38
Convenient Functions ..................................................49
Operating a TV with the Remote Control ....................51
Troubleshooting ...........................................................53
Cautions on Handling and Storing Discs.....................55
Language Code List ....................................................56
USB Host Feature Supported Products ......................57
Specifications...............................................................58
5
Notes on Discs
1
~ 6
ENG
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Disc Recording Format
This product does not support Secure (DRM) Media files.
CD-R Discs
Playable Discs
• Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of
the disc.
Disc Type
Mark (Logo)
Recorded Signals
5 inch
DVD-AUDIO
DVD-VIDEO
Audio + Video
3 1/2 inch
COMPACT
AUDIO-CD
Disc Size
Audio
DIGITAL AUDIO
Divx
Audio + Video
Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
5 inch
74 min.
3 1/2 inch
20 min.
5 inch
74 min.
3 1/2 inch
20 min.
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM discs cannot be played on this player.
•
If such discs are played, a <WRONG DISC FORMAT> message appears on the TV screen.
DVD discs purchased abroad may not play on this player.
If such discs are played, a <CAN'T PLAY THIS DISC PLEASE,CHECK REGION CODE> message
appears on the TV screen.
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD
•
player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted
picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
• Use a 650MB/74 minute CD-R disc.
Do not use CD-R discs over 700MB/80 minute as they may not be playback.
PREPARATION
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not
be able to fully play the disc.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the "mp3" and extensions can be played.
• Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession disc,
the disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate
(e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
• A maximum of 500 tracks can be played per CD.
• A maximum of 300 folders can be played per CD.
CD-R JPEG Discs
• Only files with the "jpg" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc,
the disc can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
DVD R/RW, CD-R/RW DivX Discs
• Since this product only provides encoding formats authorized by DivX Networks, Inc., a DivX file created by the user
might not play.
• Software updates for incompatible formats are not supported.
(Example : QPEL, GMC, resolution higher than 800 x 600 pixels, etc.)
• Sections with a high frame rate might not be played while playing a DivX file.
• For more information about the formats authorized by DivX Networks, Inc., please visit "www.divxnetworks.net".
Downloaded
From TheatreSystem-Manual.com Manuals
6
7
Description
ENG
Front Panel
2
3
4
5
6
7
8
9
10
1. Power (
) button
1
2. Disc Insert Hole
1. Headphone Jack
3. Display
2
2. AUX IN 1 Jack
4. Eject button
3
3. USB Port
PREPARATION
1
Side Panel
5. Function button
6. Tuning Down & Skip (
) button
7. Stop ( ) button
8. Play/Pause (
) button
9. Tuning Up & Skip (
) button
10. Volume Control button
Rear Panel
Accessories
1
2
3
4
5
Remote Control
AH59-01778L
11 10 9
8
1. 2.1 Channel Speaker Output Connector
2. Component Video Output Jacks
Connect a TV with Component video inputs to these jacks.
3. Video Output Jack
Connect your TV's video input jacks (VIDEO IN) to
the VIDEO OUT Jack on this unit.
4. External Digital Optical Input Jack
Use this to connect external equipment capable of digital
output.
Downloaded
From TheatreSystem-Manual.com Manuals
8
7
Video Cable
AH39-40001V
FM Antenna
AH42-00017A
User's Manual
AH68-01963R
6
5. HDMI OUT Jack
6. AUX IN 2 Jacks
7. FM 75Ω COAXIAL Jack
8. Stand
9. Cable Tie
10. Stand Fix Hole
11. Cooling Fan
9
Description (Con’t)
ENG
Remote Control
Insert Remote Batteries
2. TV button
3. TV/VIDEO button
1
2
3
4
17
4. POWER button
5. Number (0~9) buttons
18
19
1
2
3
Remove the battery cover in the direction of the arrow.
Insert two 1.5V AAA batteries, paying attention to the correct polarities
(+ and –).
Replace the battery cover.
6. REMAIN button
7. STEP button
8. Tuning Preset/CD Skip buttons
9. VOLUME button
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).
• Use the correct type of batteries. Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose the batteries to heat or a flame.
PREPARATION
1. DVD RECEIVER button
10. MENU button
5
11. AUDIO button
12. DIGEST button
6
7
20
21
13. SLIDE MODE button
14. TUNER MEMORY, SD(Standard
Definition)/HD(High Definition) button
8
15.V-SOUND(Virtual Sound),
22
16. SLOW, MO/ST button
9
23
Operation Range of the Remote Control
V-H/P(Virtual Headphone) button
17.
DVD button
The remote control can be used up to approximately 23 feet (7 meters) in a straight line. It can also be operated
at a horizontal angle of up to 30° from the remote control sensor.
TUNER button
USB, AUX button
24
10
25
18. EJECT button
19. DIMMER button
26
20. CANCEL button
21. REPEAT button
22.
11
12
13
27
28
29
30
14
31
15
32
16
33
PLAY/PAUSE button
STOP button
SEARCH buttons
23. TUNING/CH button
24. MUTE button
25. RETURN button
26. Cursor/ENTER button
27. SUBTITLE button
28. EXIT button
29. ZOOM button
30. INFO button
31. SLEEP button
32. LOGO button
33. EZ VIEW button
Downloaded
From TheatreSystem-Manual.com Manuals
10
11
Connecting the Speakers
ENG
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
HT-X200
Front Speaker (L)
Front Speaker (R)
L
SW
R
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under the TV stand.
Front Speakers L R
• Place these speakers in front of your listening position, facing
inwards (about 45°) toward you.
Connecting the Speakers
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the
distance of the TV's screen size away from the TV.
Example : For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
Subwoofer SW
• The position of the subwoofer is not so critical.
CONNECTIONS
Subwoofer
1
2
Black
Red
1
2
Press down the terminal tab on the back of the speaker.
3
Connect the connecting plugs to the back of the Home
Theater.
Insert the black wire into the black terminal (–) and the red
wire into the red (+) terminal, and then release the tab.
■
Make sure the colors of the speaker terminals match the colors of the
connecting plugs.
Place it anywhere you like.
• Place the speakers so that their tweeters will be at the same
height as your ear.
• Do not let children play with or near the speakers. They could get hurt if a speaker falls.
• When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
• Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien
substances into the duct (hole) of the subwoofer speaker.
• Do not hang the subwoofer on the wall through the duct (hole).
• If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated
by the speaker. If this occurs, place the speaker away from your TV set.
Downloaded
From TheatreSystem-Manual.com Manuals
12
13
Installing the Main Unit
ENG
Method 1 : Installing the Stand so that the DVD Player Lays Flat.
Preparation
■ Disconnect the AC power cord from the AC outlet before installing the main unit.
■ Connect the cables before installation.
1
2 3
Method 2 : Installing the Stand so that the DVD Player Stands up.
Preparation
■ Disconnect the AC power cord from the AC outlet before installing the main unit.
■ Connect the cables before installation.
4
1
2 3
4
CONNECTIONS
1
1
Turn the stand counter-clockwise and pull it apart.
■
The DVD Player and stand are separated.
2
Hold the DVD Player and stand as shown by the figure and turn
the right side of the stand upward so that it is slightly slanted.
3
Insert the 2 stand anchors into the holes on the back of the
DVD Player.
4
Turn the right side of the stand clockwise to fix it to the back of the
DVD Player.
• Be careful not to scratch the surface the DVD Player when installing
the stand.
• Do not turn the DVD Player left or right as it may separate it from the stand.
Turn the stand in the direction of the arrow and pull it apart.
■
The DVD player and stand are separated.
2
Lift the right side of the stand so that it is slightly slanted.
3
Insert the 2 stand anchors into the holes on the bottom of the
DVD Player.
4
Turn the right side of the stand clockwise to fix it to the bottom of the
DVD Player.
Arranging the Cables
Use the cable tie to keep the cables together.
Downloaded
From TheatreSystem-Manual.com Manuals
14
15
Connecting the Video Out to your TV
HDMI Function
ENG
Choose one of the three methods for connecting to a TV.
Resolution Selection
This function allows the user to select the screen resolution for HDMI output.
In Stop mode, press and hold the SD/HD (Standard Definition/High Definition)
button on the remote control.
METHOD 3
(supplied)
METHOD 1
Resolutions available for the HDMI output are 480p, 720p and 1080i.
■
SD(Standard Definition) resolution is 480p and HD(High Definition) resolution is 720p/1080i.
• If the TV does not support the configured resolution, you will not be able to see the
picture properly.
• When an HDMI cable is connected, composite and component video signals
are not output.
• See your TV owner's manual for more information on how to select the TV's Video
Input source.
Why use HDMI (High Definition
Multimedia Interface)?
This device transmits a DVD
video signal digitally without
the process of converting to
analog. You will get sharper
digital pictures when using an
HDMI connection.
CONNECTIONS
METHOD 2
■
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control, Anynet + can be used by
connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+.
METHOD 1 : HDMI ....... (Best Quality)
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack
on your TV.
METHOD 2 : Component Video .... (Better Quality)
With Anynet+
You can operate this unit,
power on your TV, or watch a
movie by pressing the Play
button on your Samsung TV's
remote control.
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from
the Component Video Output (Pr, Pb and Y) Jacks on the back of the DVD Player to the Component Video Input
Jacks on your TV.
1
Connect the main unit of the Home Theater to a Samsung TV with an HDMI cable.
(See page 18)
2
Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
■
You can operate the Home Theater by using the TV remote control.
(Available TV buttons :
,
,
,
, , and , buttons,
~
button)
If you select TV
METHOD 3 : Composite Video ....... (Good Quality)
Set the Anynet+(HDMI-CEC) function to <On> on your TV.
■
Connect the supplied video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on
your TV.
■
MOVE
• This product operates in Progressive scan mode (480i Only) for Component Output.
• After making the video connection, set the Video input source on your TV to match the corresponding
Video output (HDMI, Component or Composite) on your Home theater.
See your TV owner's manual for more information on how to select the TV's Video Input source.
• If you use an HDMI cable to connect a Samsung TV to the main unit, you can operate
the Home Theater using the TV's remote control. This is only available with SAMSUNG TVs that
support Anynet+(HDMI-CEC).
logo. If your TV has an
logo, then it supports the Anynet+ function.
• Please check the
Downloaded
From TheatreSystem-Manual.com Manuals
16
ENTER
EXIT
<Receiver : On> : You can listen to audio through the Home Theater.
<Receiver : Off> : You can listen to audio through the TV.
If you select the THEATER
Select <THEATER to connector> and set the option of each items below.
■
■
■
■
■
MOVE
ENTER
<View TV> : If Anynet+ (HDMI-CEC) is on and you select View TV, the Home Theater
will automatically switch to DIGITAL IN.
<THEATER Menu> : You can access the Home Theater menu.
<THEATER Operation> : The Home Theater disc playback information will be displayed.
<Receiver : On> : You can listen to audio through the Home Theater.
<Receiver : Off> : You can listen to audio through the TV.
EXIT
• When selecting View TV, you must have a digital optical cable connected from the
TV to the Home Theater listen to the TV sound through the Home Theater.
• If Anynet+ (HDMI-CEC) is on and you turn off the main unit, your TV will also turn off.
• Anynet+ (HDMI-CEC) will only work while in the DVD mode.
17
Connecting Audio from External Components
AUX1 : Side Panel
AUX2 : Rear Panel
(not supplied)
OPTICAL : Rear Panel
Audio Cable
Optical Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either left
or right.
(not supplied)
AUX1 : Connecting an External Component/MP3 player
CONNECTIONS
Audio Cable
ENG
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 player.
2
Press the AUX button on the remote control to select <AUX1> input.
■
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD ➝ D.IN ➝ AUX 1 ➝ AUX 2 ➝ USB ➝ FM.
1
Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital
component.
2
Press the AUX button on the remote control to select <D.IN>.
■
AUX2 : Connecting an External Analog Component
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD ➝ D.IN ➝ AUX 1 ➝ AUX 2 ➝ USB ➝ FM.
Analog signal components such as a VCR.
1
Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
■
2
Be sure to match connector colors.
Press the AUX button on the remote control to select <AUX2> input.
■
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD ➝ D.IN ➝ AUX 1 ➝ AUX 2 ➝ USB ➝ FM.
• You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
Downloaded
From TheatreSystem-Manual.com Manuals
18
19
Connecting the FM Antenna
Before Reading the User's Manual
ENG
Make sure to check the following terms before reading the user manual.
Icons that will be used in manual
Icon
DVD
CD
FM Antenna (supplied)
MP3
JPEG
DivX
Term
DVD
This involves a function available with DVD or
DVD-R/DVD-RW discs that have been recorded and
finalized in Video Mode.
CD
This involves a function available with a data CD
(CD-R or CD-RW).
MP3
This involves a function available with CD-R/-RW discs.
JPEG
This involves a function available with CD-R/-RW discs.
DivX
This involves a function available with MPEG4 discs.
(DVD R/RW, CD-R or CD-RW)
CAUTION
Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
This involves a case where a function does not
operate or settings may be cancelled.
This involves tips or instructions on the page that
help each function operate.
OPERATION
NOTE
1
2
Definition
• In this manual, the instructions marked with "DVD ( DVD )" are applicable to DVD-VIDEO, DVD-AUDIO
and DVD-R/-RW discs that have been recorded in Video Mode and then finalized.
Where a particular DVD type is mentioned, it is indicated separately.
• If a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be playable.
• Depending on the content of the disc, the initial screen may appear different.
• This unit does not receive AM broadcasts.
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
■
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit
may rise and may damage it.
■
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered
with a newspaper or cloth, heat may build up inside the unit and fire may result.)
Downloaded
From TheatreSystem-Manual.com Manuals
20
21
Before Using Your Home Theater
Disc Playback
To Operate your Samsung TV and the Home Theater with the HT-X200's Remote Control
1
The DVD Home Theater's remote can be used to control Samsung TVs.
1
DVD
ENG
CD
Load a disc vertically into the Disc Insert Hole.
■
Insert a disc so that the label side faces forward.
■
Playback starts automatically.
Plug the main unit's power cord into the AC power supply.
ALL
2
Press the TV button to set the remote to TV mode.
3
Press the POWER button to turn on your Samsung TV
with this remote.
To eject the disc, press the EJECT button.
Press the TV/VIDEO button to select VIDEO mode on your TV.
VIDEO
To stop playback, press the STOP button during playback.
■
■
5
Press the DVD RECEIVER button to switch to DVD RECEIVER mode to
operate the DVD Home Theater
6
Press the FUNCTION button on the main unit or DVD button
on the remote to enable DVD playback.
If pressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory.
If the PLAY/PAUSE (
) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
If pressed twice, <STOP> is displayed, and if the PLAY/PAUSE (
) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press the PLAY/PAUSE (
■
OPERATION
4
2
To resume playback, press the PLAY/PAUSE (
) button during playback.
) button again.
• Depending on the content of the disc, the initial screen may appear different.
• Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system)
recommendations.
Downloaded
From TheatreSystem-Manual.com Manuals
22
23
MP3/WMA-CD Playback
JPEG File Playback
MP3
Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played.
1
2
The MP3/WMA menu screen will appear and playback will start.
The appearance of the menu depends on the MP3/WMA disc.
■
WMA-DRM files cannot be played.
In Stop mode, use the Cursor ,
and then press the ENTER button.
Use the Cursor
,
,
,
1
Load the JPEG disc.
■
2
button to select the album,
button to select the track.
Playback starts automatically. Each image is displayed for 5 seconds and then the next
imageis displayed.
Press the SLIDE MODE button.
■
Each time the button is pressed, the image makes the transition as follows:
SLIDE SHOW MODE : 1~5 ➝ SLIDE SHOW MODE : RANDOM ➝ SLIDE SHOW MODE : NONE
Press the
To change the album, use the Cursor , , , button to select another
album in Stop mode, and then press the ENTER button.
■
4
Slide Mode
■
■
3
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played
back with this Home Theater.
Load the MP3 disc.
■
ENG
JPEG
To select another album and track, repeat Steps 2 and 3 above.
Press the STOP( ) button to stop playback.
■
Digest Function
You can view 9 JPEG images on the TV screen at once.
1
Press the DIGEST button during playback.
■
2
JPEG files will be shown in 9 windows.
Press the Cursor , , , button to select the desired image and
then press the ENTER button.
■
The selected image is played for 5 seconds before moving to the next image.
To view the previous or next 9 images, press the
button.
To play a file icon in the screen,
Press the Cursor
,
,
,
OPERATION
• Depending on the recording mode, some MP3/WMA-CDs may not play.
• Table of contents of a MP3-CD varies depending on the MP3/WMA track format
recorded on the disc.
button to skip to the next slide.
Each time the button is pressed, the slide moves backward or forward.
button when it is in Stop mode and select a desired icon from the top part of the menu.
Music File Icon : To play music files only, select the
Icon.
Image File Icon : To view image files only, select the
Icon.
Movie File Icon : To view movie files only, select the
Icon.
All File Icon : To view movie files only, select the
Icon.
Rotate/Flip Function
Press the Cursor
during playback.
,
,
,
button
button: Flip Vertically
button: Rotate 90°
Counterclockwise
button: Rotate 90°
Clockwise
Original Image
button: Flip Horizontally
• The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files.
• If a JPEG file is played when the HDMI output resolution is 720p/1080i, the mode is
automatically converted to 480p mode.
Downloaded
From TheatreSystem-Manual.com Manuals
24
25
DivX Playback
ENG
DivX
The functions on this page apply to DivX disc playback.
Skip Forward/Back
During playback, press the
Subtitle Display
,
Press the SUBTITLE button.
button.
■
Goes to the next file whenever you press the
■
Goes to the previous file whenever you press the
■
button, if there are over 2 files in the disc.
Each time you press the button, your selection will toggle between <SUBTITLE (1/N, 2/N ...)>
and <SUBTITLE OFF>.
button, if there are over 2 files in the disc.
■
If the disc has only one subtitle file, it will be played automatically.
■
See number 2 (Caption Function) below for more details concerning Subtitle usage with DivX
discs.
Fast Playback
If the Disc has more than One Subtitle File
To play back the disc at a faster speed, press the
■
or
button during playback.
If the disc has more than one subtitle file, the default subtitle may not match the
movie and you will have to select your subtitle language as follows:
Each time you press either button, the playback speed will change as follows:
2x ➝ 4x ➝ 8x ➝ 32x ➝ Normal.
1
In Stop mode, press the Cursor ,
button, select the desired subtitle (
from the TV screen, and then press the ENTER button.
2
When you select the desired DivX file from the TV screen, the movie will be
played normally.
5 Minute Skip function
During playback, press the Cursor
,
button.
Playback skips 5 minutes forward whenever you press the Cursor
■
Playback skips 5 minutes back whenever you press the Cursor
1
button.
DivX(Digital internet video eXpress)
button.
Zoom Function
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and
video data over the Internet in real-time.
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality
video and audio.
Press the ZOOM button.
1. Supported Formats
■
This product only supports the following media formats. If both video and audio formats are not supported, the user may
experience problems such as broken images or no sound.
Each time you press the button, your selection will toggle between <ZOOM X2> and
<ZOOM OFF>.
2
Press the Cursor
OPERATION
■
)
Supported Video Formats
,
,
,
button to move to the area you want to enlarge.
Format
Supported Versions
• A DivX file can be zoomed only in ZOOM X2 mode.
• DivX files have .Avi file extensions, however, not all .Avi files are DivX and may not be
playable in this unit.
Audio Display
If there are multiple audio tracks on a disc, you can toggle between them.
Each time you press the button, your selection will toggle between <AUDIO (1/N, 2/N ...)> and
MP3
WMA
80~384kbps
56~128kbps
44.1khz
AC3
128~384kbps
44.1/48khz
• Aspect Ratio: Although the default DivX resolution is 640x480 pixels (4:3), this product supports up to 800x600 pixels
(16:9). TV screen resolutions higher than 800 will not be supported.
Press the AUDIO button.
■
WMV
V1/V2/V3/V7
Supported Audio Formats
Format
Bit Rate
Sampling Frequency
■
AVI
DivX3.11~DivX5.1, XviD
• When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on
the screen during playback.
.
2. Caption Function
•
is displayed when there is one supported language in the disc.
Downloaded
From TheatreSystem-Manual.com Manuals
26
• You must have some experience with video extraction and editing in order to use this feature properly.
• To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi)
within the same folder.
Example. Root Samsung_007CD1.avi
Samsung_007CD1.smi
• Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the
file name.
27
Using the Playback Function
Displaying Disc Information
DVD
CD
MP3
JPEG
ENG
Checking the Remaining Time
DivX
You can view disc playback information on the TV screen.
CD
MP3
Press the REMAIN button.
■
Press the INFO button.
■
DVD
For checking the total and remaining time of a title or chapter being played.
Each time the Remain button is pressed
Each time the button is pressed, the display changes as follows:
TITLE ELAPSED ➝ TITLE REMAIN ➝ CHAPTER ELAPSED ➝ CHAPTER REMAIN
DVD-VIDEO
DVD
GROUP ELAPSED ➝ GROUP REMAIN ➝ TRACK ELAPSED ➝ TRACK REMAIN
DVD-AUDIO
The information
Display disappears
from the screen
TRACK ELAPSED ➝ TRACK REMAIN ➝ TOTAL ELAPSED ➝ TOTAL REMAIN
CD
TRACK REMAIN ➝ TRACK ELAPSED
MP3
CD
Fast Playback
The information
Display disappears
from the screen
DVD
DivX
,
button.
Each time the button is pressed during playback, the playback speed changes as follows:
DivX
The information
Display disappears
from the screen
2X ➝
4X ➝
8X ➝
32X ➝
PLAY
2X ➝
4X ➝
8X ➝
32X ➝
PLAY
OPERATION
JPEG
MP3
Press the
■
MP3
CD
• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x,
8x, and 32x speeds.
• Depending on the disc, the disc information display may appear different.
• Depending on the disc, you can also select DOLBY DIGITAL, or PRO LOGIC.
Slow Playback
appears on the TV screen!
If this symbol appears on the TV screen when pressing a button, that operation is not
possible with the disc currently being played.
Screen Display
DVD display
DVD DVD-AUDIO display
AUDIO
DVD
Press the SLOW button.
■
Each time the button is pressed during playback, the playback speed changes as follows:
DVD
TITLE display
ELAPSED TIME display
STEREO (L/R) display
CHAPTER display
REPEAT PLAYBACK display
DOLBY DIGITAL display
TRACK (FILE) display
AUDIO LANGUAGE display
ANGLE display
GROUP display
SUBTITLE display
CD display
Downloaded
From TheatreSystem-Manual.com Manuals
28
DivX
1/2 ➝
1/4 ➝
1/8 ➝
1/2 ➝
1/2 ➝
1/4 ➝
1/8 ➝
PLAY
1/4 ➝
1/8 ➝
PLAY
DivX
• No sound is heard during slow playback.
• Reverse slow playback does not work with DivX.
29
Using the Playback Function (Con’t)
Skipping Scenes/Songs
Press the
■
■
DVD
ENG
Repeat Playback
MP3
,
DVD
CD
MP3
JPEG
DivX
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
button.
Each time the button is pressed during playback, the previous or next chapter, track or
directory (file) will be played.
You cannot skip chapters consecutively.
Press the REPEAT button.
Each time the button is pressed during playback, the repeat playback modechanges as
follows:
REPEAT : CHAPTER ➝ REPEAT : TITLE ➝ REPEAT : OFF
DVD
DVD-VIDEO
TITLE 01/05 CHAPTER 002/045
REPEAT : TRACK ➝ REPEAT : GROUP ➝ REPEAT : OFF
TITLE 01/05 CHAPTER 004/045
DVD-AUDIO
REPEAT : TRACK ➝ REPEAT : DISC ➝ REPEAT : OFF
CD
REPEAT : RANDOM ➝ REPEAT : TRACK ➝ REPEAT : DIR ➝
MP3
MP3
JPEG
DivX
REPEAT : DISC ➝ REPEAT : OFF
Repeat Playback Options
TRACK : Repeatedly plays the selected track.
TITLE : Repeatedly plays the selected title.
DIR : Repeatedly plays all tracks in the selected folder.
GROUP : Repeatedly plays the selected group.
DISC : Repeatedly plays the entire disc.
RANDOM : Plays tracks in random order.
(A track that has already been played may be played again.)
OFF : Cancels Repeat Playback.
To Select a Repeat Playback Mode in the Disc Information Screen
1
2
3
DVD
OPERATION
CHAPTER : Repeatedly plays the selected chapter.
CD
Press the INFO button twice.
Press the Cursor
button to move to REPEAT PLAYBACK (
) display.
Press the Cursor
button to select the desired Repeat Playback mode.
To select another album and track, repeat Steps 2 and 3 above.
4
Press the ENTER button.
DVD
CD
• For DivX, MP3 and JPEG discs, you cannot select Repeat Play from the information
display screen.
Downloaded
From TheatreSystem-Manual.com Manuals
30
31
Using the Playback Function (Con’t)
A-B Repeat Playback
ENG
Angle Function
DVD
You can repeatedly play back a designated section of a DVD.
1
2
3
1
2
3
button to move to the REPEAT PLAYBACK (
) display.
Press the Cursor , button to select <A-> and then press the ENTER
button at the beginning of the desired segment.
■
4
This function allows you to view the same scene in different angles.
Press the INFO button twice.
Press the Cursor
DVD
Press the INFO button.
Press the Cursor
button to move to ANGLE (
Press the Cursor
,
■
) display.
or numeric buttons to select the desired angle.
Each time the button is pressed, the angle changes as follows:
When the ENTER button is pressed, the selected position will be stored in memory.
1/3
Press the ENTER button at the end of the desired segment.
■
2/3
The specified segment will be played repeatedly.
3/3
A-B
REPEAT : A-B
To return to normal playback, press the Cursor
OFF.
,
• The Angle function works only with discs on which multiple angles have been recorded.
button to select
Zoom (Screen Enlarge) Function
DVD
DivX
This function allows you to enlarge a particular area of the displayed image.
1
2
Step Function
DVD
Press the ZOOM button.
Press the Cursor
enlarge.
,
,
,
button to move to the area you want to
DivX
3
Press the STEP button.
■
OPERATION
• The A-B Repeat function does not operate with DivX, MP3 or JPEG discs.
Press the ENTER button.
■
Each time the button is pressed, the zoom level changes as follows:
The picture moves forward one frame each time the button is pressed during playback.
ZOOM X 1.5 ➝ ZOOM X 2 ➝ ZOOM X 3 ➝ ZOOM OFF
SELECT ZOOM POSITION
• No sound is heard during step motion playback.
• When a DivX disc is being played, the screen is enlarged up to twice the normal size.
Downloaded
From TheatreSystem-Manual.com Manuals
32
33
Using the Playback Function (Con’t)
EZ VIEW Function
ENG
Audio Language Selection Function
DVD
Press the EZ VIEW button.
Each time the button is pressed, the zoom function will switch between On and Off.
When a movie is played in Widescreen format, black bars at the top and bottom of the TV
screen can be removed by pressing the EZ VIEW button.
1
2
Press the INFO button twice.
Press the Cursor
language.
■
EZ VIEW
EZ VIEW OFF
DVD
,
button or numeric buttons to select the desired audio
Depending on the number of languages on a DVD disc, a different audio language (ENGLISH,
SPANISH, FRENCH, etc.) is selected each time the button is pressed.
SP 2/3
FR 3/3
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to
vertical ratio.
• This feature is not supported for DivX discs.
• During the EZ View operation, some of the left and right sides may be cut slightly.
1
2
3
DVD
Press the INFO button twice.
Press the Cursor
button to move to SUBTITLE (
) display.
Press the Cursor
button or numeric buttons to select the desired subtitle.
DVD-AUDIO
EN 1/3
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key number to access. See the disc packaging for
details and the key number.
EN 01/ 03
OFF
OPERATION
Bonus Group
Subtitle Language Selection Function
SP 02/ 03
FR 03/ 03
When you play a DVD-Audio disc that has a bonus group, the key number
input screen appears automatically.
OFF / 03
BONUS GROUP
KEY NUMBER :
• If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
the key number.
Navigating Pages
• To operate this function, you can also press the AUDIO or SUBTITLE buttons on the
remote control.
• Depending on the disc, the Subtitle and Audio Language functions may not be available.
DVD-AUDIO
During playback, press the
■
■
,
button on the remote control.
You can select the desired image from a DVD-Audio disc containing still images.
With some discs, you may not be able to select images.
Downloaded
From TheatreSystem-Manual.com Manuals
34
35
Using the Playback Function (Con’t)
Moving Directly to a Scene/Song
DVD
1
2
DVD
5
6
MP3
Using the Disc Menu
JPEG
CD
1
2
Press the INFO button.
Press the Cursor
Press the Cursor
,
button or numeric buttons to select the
) and then press the ENTER button.
,
button to move to the Chapter (
Press the Cursor
,
button to move to time (
In Stop mode, press the MENU button.
Press the Cursor , button to move to the <DISC MENU> and then
press the ENTER button.
■
) display.
3
4
Press the Cursor , button or numeric buttons to select the
desired chapter and then press the ENTER button.
) display.
001/040
0:00:37
,
,
,
button to select the desired item.
Press the ENTER button.
Press the EXIT button to exit the setup screen.
• The disc menu display may be different depending on the disc.
1/1
MOVE
ENTER
EXIT
JPEG
Press the numeric buttons.
■
The selected file will be played.
■
When playing an MP3 or JPEG disc, you cannot use the Cursor
To move a folder, press STOP( ) and then press the Cursor
Using the Title Menu
,
,
button to move to a folder.
button.
DVD
OPERATION
MP3
When you select Disc Menu and it is not supported by the disc, the <This menu is not
supported> message appears on the screen.
Press the Cursor
Press the numeric buttons to select the desired time and then press
the ENTER button.
01/05
DVD
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
desired title/track (
3
4
CD
ENG
For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this feature
may vary.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor
, button to move to the <Title Menu>.
Press the ENTER button.
■
The title menu appears.
Press the EXIT button to exit the setup screen.
• You can press the
button on the remote control to move directly to the desired
title, chapter, or track.
• Depending on the disc, you may not be able to move to the selected title or time.
• The Title menu display may be different depending on the disc.
MOVE
Downloaded
From TheatreSystem-Manual.com Manuals
36
ENTER
EXIT
37
Playing Media Files using the USB Host Feature
You can enjoy media files such as pictures, movies and music saved in an MP3 player, USB memory or digital camera in high
quality video by connecting the storage device to the USB port of the home theater.
1
Connect the USB device to the USB port on the side of the unit.
ENG
Compatible Devices
PHONES
1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc
in Windows (2000 or later) without additional driver installation.)
2. MP3 Player: HDD and flash type MP3 players.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
USB
• Cameras that operate as a removable disc in Windows (2000 or later) without additional driver installation.
4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
• You may experience a difference in playback quality when you connect a USB1.1 device.
• For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader.
• Depending on the manufacturer. the USB card reader may not be supported.
• If you install multiple memory devices into a multi card reader, you may experience problems.
2
Press the FUNCTION button on the DVD Player or the USB button on the
6. If you use a USB extension cable, the USB device might not be recognized.
remote control to select the USB mode.
<USB> appears on the display screen and then disappears.
■
The USB MENU screen appears on the TV screen and the saved file is played.
To stop playback, press the STOP ( ) button.
Still Picture
Music
Safe USB Removal
To prevent damage to the memory stored in the USB device, perform safe removal before
Movie
disconnecting the USB cable.
(1) Press the STOP ( ) button twice in a row.
The display will show REMOVE USB.
(2) Remove the USB cable.
• CBI
File
extension
Bit rate
Version
Pixel
Sampling
Frequency
JPG
JPG .JPEG
–
–
640x480
–
MP3
.MP3
80~384kbps
–
–
44.1kHz
WMA
.WMA
56~128kbps
V8
–
44.1kHz
WMV
.WMV
4Mbps
V1,V2,V3,V7
720x480 44.1KHz~48KHz
DivX
.AVI,.ASF
4Mbps
DivX3.11~DivX5.1,XviD
800x600 44.1KHz~48KHz
(Control/Bulk/Interrupt) is not supported.
• Digital
Skip Forward/Back
During playback, press the
File name
OPERATION
3
Supported Formats
■
button.
■
When there is more than one file and you press the
button, the next file is selected.
■
When there is more than one file and you press the
button, the previous file is selected.
Cameras that use PTP protocol or require additional program installation when connected
to a PC are not supported.
• A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file
system is supported.)
• Some MP3 players, when connected to this product,may not operate depending on the sector size
of their file system.
• The USB HOST function is not supported if a product that transfers media files by its manufacturerspecific program is connected.
• Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
• The
USB host function of this product does not support all USB devices.
For information on the supported devices, see page 57.
Fast Playback
To play back the disc at a faster speed, press the
■
button during playback.
Each time you press either button, the playback speed will change as follows:
2x ➝ 4x ➝ 8x ➝ 32x ➝ Normal.
Downloaded
From TheatreSystem-Manual.com Manuals
38
39
Settings
ENG
Setting the Language
Setting TV Screen type
OSD(On-Screen Display) language is set to English by default.
MOVE
ENTER
RETURN
EXIT
1
2
3
4
5
Depending on your TV type (Wide Screen or conventional 4:3), you can select the TV's aspect ratio.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor
button to move to <Setup> and then press the ENTER button.
Select <LANGUAGE> and then press the ENTER button.
Press the Cursor ,
the ENTER button.
button to select <OSD LANGUAGE> and then press
Press the Cursor ,
the ENTER button.
button to select the desired language and then press
MOVE
ENTER
RETURN
In Stop mode, press the MENU button.
Press the Cursor
button to move to <Setup> and then press the ENTER button.
Press the Cursor
ENTER button.
button to move to <TV DISPLAY> and then press the
Press the Cursor
ENTER button.
,
EXIT
4
button to select the desired item and then press the
Once the setup is complete, you will be taken to the previous screen.
Once the setup is complete, the OSD will be English if English has been selected as language.
MOVE
ENTER
RETURN
EXIT
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
MOVE
SELECT
RETURN
EXIT
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
Adjusting the TV Aspect Ratio (Screen Size)
• OSD LANGUAGE : Selecting the OSD Language
• AUDIO : Selecting the Audio Language (recorded on the disc)
• SUBTITLE : Selecting the Subtitle Language (recorded on the disc)
• DISC MENU : Selecting the Disc Menu Language (recorded on the disc)
If the language you selected is not recorded on the disc, the menu language will not change even
if you set it to your desired language.
MOVE
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
For a standard TV, select either <4:3PS> or <4:3LB> option according to personal preference. Select <WIDE/HDTV> if you have a
widescreen TV.
4:3PS (4:3 Pan&Scan)
Select this to play a 16:9 picture in the pan & scan mode on a conventional TV.
■ You can see the central portion of the screen only (with the sides of the 16:9 picture cut off).
4:3LB (4:3 Letterbox)
Select this to play a 16:9 picture in the letter box mode on a conventional TV.
■ Black bars will appear at the top and bottom of the screen.
SETUP
• OTHER : To select another language, select OTHER and enter the language code of your country.
(See page 56 for language codes) AUDIO, SUBTITLE and DISC MENU language can be
selected.
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high definition TVs is 16:9. This ratio is
called the aspect ratio. When playing DVDs recorded in different screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
EXIT
WIDE/HDTV
Select this to view a 16:9 picture in the full-screen mode on your widescreen TV.
■ You can enjoy the widescreen aspect.
• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
• Since DVD discs are recorded in various image formats, they will look different depending on the software,
the type of TV, and the TV aspect ratio setting.
• In HDMI operation, the screen is automatically converted to Wide mode.
Downloaded
From TheatreSystem-Manual.com Manuals
40
41
Settings (Con’t)
ENG
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
MOVE
ENTER
RETURN
EXIT
1
2
3
4
Press the Cursor
button to move to <Setup> and then press the ENTER button.
Press the Cursor
button to move to <PARENTAL> and then press the ENTER button.
Press the Cursor ,
the ENTER button.
1
2
SELECT
RETURN
JPEG
During playback, press the PLAY/PAUSE button when an image you like appears.
Press the LOGO button.
<COPY LOGO DATA> will be displayed on the TV screen.
3
button to select the desired rating level and then press
The power will turn off and then back on.
The selected wallpaper will be displayed.
You can select up to 3 wallpaper settings.
COPY LOGO DATA
Enter the password and then press the ENTER button.
The password is set to "7890" by default.
Once the setup is complete, you will be taken to the previous screen.
MOVE
DVD
While watching a DVD or JPEG CD, you can set the image you like as background wallpaper.
In Stop mode, press the MENU button.
If you have selected Level 6, you cannot view DVDs with Level 7 or higher.
The higher the level, the closer the content is to violent or adult material.
5
Setting the Wallpaper
• This function will not work when the HDMI output is 720p or 1080i.
EXIT
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
To Select One of the 3 Wallpaper Settings you've made
• This function works only if a DVD disc contains the rating level information.
Setting the Password
MOVE
ENTER
RETURN
EXIT
1
2
3
4
You can set the password for the Parental (rating level) setting.
In Stop mode, press the MENU button.
Press the Cursor
button to move to <Setup> and then press the ENTER button.
Press the Cursor
button to move to <LOGO> and then press the ENTER button.
Press the Cursor , button select the desired <USER>, and then
press the ENTER button.
This selects one of the 3 wallpaper screens
MOVE
ENTER
RETURN
In Stop mode, press the MENU button.
Press the Cursor
Press the Cursor
ENTER button.
button to move to <Setup> and then press the ENTER button.
RETURN
• ORIGINAL : Select this to set the Samsung Logo image as your wallpaper.
button to move to <PASSWORD> and then press the
• USER : Select this to set the desired image as your wallpaper.
MOVE
SELECT
RETURN
EXIT
Press the ENTER button.
Enter the password and then press the ENTER button.
Enter the old password, a new password, and confirm new password.
The setting is complete.
SELECT
Press the EXIT button to exit the setup screen.
EXIT
4
5
MOVE
5
SETUP
1
2
3
EXIT
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
• The password is set to "7890" by default.
If you have forgotten the rating level password, do the following
• While the player is in
(No Disc) mode, hold the DVD Player's STOP (
display and all settings will return to the default values.
• Press the POWER button.
) button for longer than 5 seconds. “INITIALIZE” appears on the
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Downloaded
From TheatreSystem-Manual.com Manuals
42
43
Settings (Con’t)
ENG
DVD Playback Mode
Setting the DRC (Dynamic Range Compression)
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
1
2
3
MOVE
ENTER
RETURN
EXIT
4
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital
sound when watching movies at low volume at night.
1
2
3
4
Press the EJECT button and then press the MENU button.
Press the Cursor
ENTER button.
button to move to <Setup> and then press the
Press the Cursor
ENTER button.
button to move to <DVD TYPE> and then press the
Press the Cursor
ENTER button.
,
MOVE
ENTER
RETURN
RETURN
button to move to <Audio> and then press the ENTER button.
Press the Cursor
button to move to <DRC> and then press the ENTER button.
Press the Cursor
When the Cursor
button to move to <DVD VIDEO> and then press the
• DVD VIDEO : set to play the DVD video contents contained on a DVD audio disc.
• DVD AUDIO : set to play the default DVD audio.
ENTER
Press the Cursor
,
button to adjust the DRC.
EXIT
button is pressed, the effect is greater, and when the Cursor
button is
pressed, the effect is smaller.
Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.
MOVE
In Stop mode, press the MENU button.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
CHANGE
RETURN
EXIT
EXIT
• DVD Play mode is set to DVD Audio as factory default setting.
• Powering off the main unit will automatically switch to the DVD Audio mode.
Setting the AV SYNC
DivX (R) registration
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match
the video.
MOVE
ENTER
RETURN
EXIT
4
In Stop mode, press the MENU button.
Press the Cursor
Press the Cursor
ENTER button.
button to move to <Audio> and then press the ENTER button.
button to move to <AV-SYNC> and then press the
SETUP
1
2
3
Please use the Registration code to register this player with the DivX (R) video on demand format.
To learn more, go to www.divx.com/vod.
Press the Cursor , button to select the AV-SYNC Delay Time and then
press the ENTER button.
You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
MOVE
Downloaded
From TheatreSystem-Manual.com Manuals
44
SELECT
RETURN
EXIT
45
Settings (Con’t)
Listening to Radio
Remote Control
Setting the HDMI Audio
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1
2
3
MOVE
ENTER
RETURN
EXIT
4
Press the Cursor
ENTER button.
button to move to <HDMI AUDIO> and then press the
Press the Cursor
ENTER button.
,
RETURN
EXIT
Tune in to the desired station.
button is pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the
broadcasting stations.
Manual Tuning : Briefly press the
,
,
button to automatically search for active
button to increase or decrease the frequency incrementally.
Main Unit
button to select <ON> or <OFF> and then press the
is output through your TV speakers only.
SELECT
Press the TUNER button to select the FM band.
Automatic Tuning 1 : When the
button to move to <Audio> and then press the ENTER button.
• ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio
MOVE
1
2
In Stop mode, press the MENU button.
Press the Cursor
ENG
• OFF : Video is transmitted over the HDMI connection cable only, and audio is output through
1
2
Press the FUNCTION button to select the FM band.
Select a broadcast station.
Automatic Tuning 1 : Press the STOP ( ) button to select <PRESET> and then press the
button to select the preset station.
Automatic Tuning 2 : Press the STOP ( ) button to select <MANUAL> and then press and hold
the
button to automatically search the band.
the home theater speakers only.
Manual Tuning : Press the STOP ( ) button to select <MANUAL> and then briefly press the
button to tune in to a lower or higher frequency.
• The default setting of this function is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
Press the MO/ST button to listen in Mono/Stereo.
Each time the button is pressed, the sound switches between
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
In a poor reception area, select
(STEREO) and
(MONO).
(MONO) for a clear, interference-free broadcast.
MISCELLANEOUS
Downloaded
From TheatreSystem-Manual.com Manuals
46
47
Listening to Radio (Con’t)
Convenient Functions
Presetting Stations
Sleep Timer Function
ENG
You can set the time that the Home Theater will shut itself off.
Example : Presetting FM 89.10 in the memory
1
2
Press the TUNER button to select the FM band.
3
Press the TUNER MEMORY button.
Press the
,
Press the SLEEP button.
Each time the button is pressed, the preset time changes as follows :
button to select <89.10>.
10 ➝ 20 ➝ 30 ➝ 60 ➝ 90 ➝ 120 ➝ 150 ➝ OFF.
To confirm the sleep timer setting, press the SLEEP button.
The remaining time before the Home Theater will shut itself off is displayed.
Pressing the button again changes the sleep time from what you have set earlier.
<01> flashes in the display.
4
Press the
To cancel the sleep timer, press the SLEEP button until <OFF> appears on
the display.
button to select preset number.
You can select between 1 and 15 presets.
Adjusting Display Brightness
5
Press the TUNER MEMORY button again.
You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.
Press the TUNER MEMORY button before “number” disappears from the display.
Press the DIMMER button.
“number” disappears from the display and the station is stored in memory.
6
Each time the button is pressed, the brightness of front display will be adjusted.
To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the
control to select a channel.
button on the remote
• This unit does not receive AM broadcasts.
Mute Function
This is useful when answering a doorbell or telephone call.
<MUTE> appears in the display.
To restore the sound, press the MUTE button again.
Downloaded
From TheatreSystem-Manual.com Manuals
48
MISCELLANEOUS
Press the MUTE button.
49
Convenient Functions (Con’t)
Operating a TV with the Remote Control
V-SOUND(Virtual Sound)
When operating a TV with the remote control
The 2-channel sounds can be listened with virtual effects for producing much more realistic sounds as in 5.1 channels.
Press the V-SOUND button.
Each time the button is pressed, the selection changes as follows :
V.S1 ➝ V.S2 ➝ OFF
1
2
3
ENG
Press the TV button to set the remote to TV mode.
Press the POWER button to turn on the TV.
While holding down the POWER button, enter the code corresponding
to your brand of TV.
If there is more than one code listed for your TV in the table, enter one at a time to
determine which code works.
Example : For a Samsung TV
While holding down the POWER button, use the number buttons to enter 00, 15, 16, 17 and 40.
4
If the TV turns off, the setting is complete.
You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9).
Virtual Headphone Function
Use headphones (3.5 ) (not supplied) for private listening pleasure. You can enjoy dynamic sound effects similar to
that of 5.1 channel surround sound using conventional stereo headphones.
1
Plug the headphones into the headphone jack.
■
You can purchase headphones from most Electronics stores.
Press the V-H/P button.
■
Each time the button is pressed, the selection alternates between <V.HP> and <OFF>.
• V.HP : Select to enjoy a 5.1-channel surround sound that gives the feeling of being in
park or concert hall.
• OFF : Select to listen to a standard 2-channel stereo sound.
a baseball
MISCELLANEOUS
2
• The remote control may not work on some brands of TVs. Also, some operations may not
be possible depending on your brand of TV.
• If you do not set the remote control with the code for your brand of TV, the remote control
will work on a Samsung TV by default.
• Do not listen at extremely high volume levels when using headphones.
Extended, high-volume listening can lead to permanent hearing loss.
Downloaded
From TheatreSystem-Manual.com Manuals
50
51
Operating a TV with the Remote Control (Con’t)
No.
Brand
Code
No.
Brand
Code
1
Admiral (M.Wards)
56, 57, 58
44
MTC
18
2
A Mark
01, 15
45
NEC
18, 19, 20, 40, 59, 60
3
Anam
01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12,
46
Nikei
03
13, 14
47
Onking
03
4
AOC
01, 18, 40, 48
48
Onwa
03
5
Bell & Howell (M.Wards)
57, 58, 81
49
Panasonic
06, 07, 08, 09, 54, 66, 67, 73, 74
6
Brocsonic
59, 60
50
Penney
18
7
Candle
18
51
Philco
03, 15, 17, 18, 48, 54, 59, 62, 69, 90
8
Cetronic
03
52
Philips
15, 17, 18, 40, 48, 54, 62, 72
9
Citizen
03, 18, 25
53
Pioneer
63, 66, 80, 91
10
Cinema
97
54
Portland
15, 18, 59
11
Classic
03
55
Proton
40
12
Concerto
18
56
Quasar
06, 66, 67
13
Contec
46
57
Radio Shack
17, 48, 56, 60, 61, 75
14
Coronado
15
58
RCA/Proscan
18, 59, 67, 76, 77, 78, 92, 93, 94
15
Craig
03, 05, 61, 82, 83, 84
59
Realistic
03, 19
16
Croslex
62
60
Sampo
40
17
Crown
03
61
Samsung
00, 15, 16, 17, 40, 43, 46, 47, 48, 49, 59, 60,
18
Curtis Mates
59, 61, 63
19
CXC
03
62
Sanyo
19, 61, 65
20
Daewoo
02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
63
Scott
03, 40, 60, 61
25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90
64
Sears
15, 18, 19
40
65
Sharp
15, 57, 64
Daytron
ENG
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below
or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized
dealer or Samsung Electronics Service Center.
TV Brand Code List
21
Troubleshooting
98
Dynasty
03
66
Signature 2000 (M.Wards)
57, 58
23
Emerson
03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85
67
Sony
50, 51, 52, 53, 55
24
Fisher
19, 65
68
Soundesign
03, 40
25
Funai
03
69
Spectricon
01
26
Futuretech
03
70
SSS
18
27
General Electric (GE)
06, 40, 56, 59, 66, 67, 68
71
Sylvania
18, 40, 48, 54, 59, 60, 62
28
Hall Mark
40
72
Symphonic
61, 95, 96
29
Hitachi
15, 18, 50, 59, 69
73
Tatung
06
30
Inkel
45
74
Techwood
18
31
JC Penny
56, 59, 67, 86
75
Teknika
03, 15, 18, 25
32
JVC
70
76
TMK
18, 40
33
KTV
59, 61, 87, 88
77
Toshiba
19, 57, 63, 71
34
KEC
03, 15, 40
78
Vidtech
18
35
KMC
15
79
Videch
59, 60, 69
36
LG (Goldstar)
01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44
80
Wards
15, 17, 18, 40, 48, 54, 60, 64
37
38
Luxman
18
81
Yamaha
18
LXI (Sears)
19, 54, 56, 59, 60, 62, 63, 65, 71
82
York
40
39
Magnavox
15, 17, 18, 48, 54, 59, 60, 62, 72, 89
83
Yupiteru
03
40
Marantz
40, 54
84
Zenith
58, 79
41
Matsui
54
85
Zonda
01
42
MGA
18, 40
86
Dongyang
03, 54
43
Mitsubishi/MGA
18, 40, 59, 60, 75
Downloaded
From TheatreSystem-Manual.com Manuals
52
I cannot eject the disc.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
Playback does not start.
• CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on
the surface?
• Wipe the disc clean.
• No sound is heard during fast playback, slow playback, and step
Sound is not produced.
•
•
motion playback.
Are the speakers connected properly? Is the speaker setup
correctly customized?
Is the disc severely damaged?
• Is the remote control being operated within its operation range of
The remote control does not
work.
•
•
angle and distance?
Are the batteries exhausted?
Have you selected the mode(TV/DVD) functions of the remote
control (TV or DVD) correctly?
MISCELLANEOUS
22
Symptom
53
Troubleshooting (Con’t)
Cautions on Handling and Storing Discs
ENG
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
Symptom
Check/Remedy
Handling discs
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
Audio language and subtitles
do not work.
• Audio language and subtitles will not work if the disc does not
Menu screen does not appear
even when the menu function is
selected.
contain them.
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not get on
the surface.
Do not stick paper or tape on the disc.
Disc Storage
• Are you using a disc that does not contain menus?
Do not keep in
direct sunlight
Keep in a cool
ventilated area
Keep in a clean
Protection jacket.
Store vertically.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
Aspect ratio cannot be changed.
• The main unit is not working.
(Example: The power goes out
or strange noise is heard.)
• The DVD player is not working
normally.
• Turn off the power and hold the STOP (
) button on the main unit
for longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked or scratched discs.
• While
The password for rating level
has been forgotten.
•
(NO DISC) message appears on the display of main unit,
hold the main unit's STOP ( ) button for longer than 5 seconds.
“INITIALIZE” appears on the display and all settings will return to the
default values.
Press the POWER button.
Can't receive radio broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
antenna in an area with good reception.
While listening to TV audio
through the main unit,
no sound is heard.
When you get fingerprints or dirt on the disc, clean it with a mild
detergent diluted in water and wipe with a soft cloth.
• When cleaning, wipe gently from the inside to the outside of the
disc.
• If the eject button is pressed while listening to TV audio using
the D.IN, AUX functions, the DVD functions are turned on and this
stops the TV audio.
Downloaded
From TheatreSystem-Manual.com Manuals
54
• Condensation may form if warm air comes into contact with cold parts inside
the player. When condensation forms inside the player, the player may not
operate correctly. If this occurs, remove the disc and let the player stand for
1 or 2 hours with the power on.
MISCELLANEOUS
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Handling and Storing Discs
55
Language Code List
USB Host Feature Supported Products
ENG
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 40).
Digital Camera
Code
Language
Code
1027
Afar
1181
1028
Abkhazian
1183
1032
Afrikaans
1186
1039
Amharic
1194
1044
Arabic
1196
1045
Assamese
1203
1051
Aymara
1209
1052
Azerbaijani
1053
Bashkir
1057
Byelorussian
1059
Language
Frisian
Code
Language
Code
Language
1334
Latvian, Lettish
1506
Slovenian
Irish
1345
Scots Gaelic
1347
Malagasy
1507
Samoan
Maori
1508
Shona
Galician
1349
Macedonian
1509
Somali
Guarani
1350
Malayalam
1511
Albanian
Gujarati
1352
Mongolian
1512
Serbian
Hausa
1353
Moldavian
1513
Siswati
1217
Hindi
1356
Marathi
1514
Sesotho
1226
Croatian
1357
Malay
1515
Sundanese
1229
Hungarian
1358
Maltese
1516
Swedish
Bulgarian
1233
Armenian
1363
Burmese
1517
Swahili
1060
Bihari
1235
Interlingua
1365
Nauru
1521
Tamil
1069
Bislama
1239
Interlingue
1369
Nepali
1525
Tegulu
1066
Bengali; Bangla
1245
Inupiak
1376
Dutch
1527
Tajik
1067
Tibetan
1248
Indonesian
1379
Norwegian
1528
Thai
1070
Breton
1253
Icelandic
1393
Occitan
1529
Tigrinya
1079
Catalan
1254
Italian
1403
(Afan) Oromo
1531
Turkmen
1093
Corsican
1257
Hebrew
1408
Oriya
1532
Tagalog
1097
Czech
1261
Japanese
1417
Punjabi
1534
Setswana
1103
Welsh
1269
Yiddish
1428
Polish
1535
Tonga
1105
Danish
1283
Javanese
1435
Pashto, Pushto
1538
Turkish
1109
German
1287
Georgian
1436
Portuguese
1539
Tsonga
1130
Bhutani
1297
Kazakh
1463
Quechua
1540
Tatar
Greek
1298
Greenlandic
1481
Rhaeto-Romance
1543
Twi
1144
English
1299
Cambodian
1482
Kirundi
1557
Ukrainian
1145
Esperanto
1300
Kannada
1483
Romanian
1564
Urdu
1149
Spanish
1301
Korean
1489
Russian
1572
Uzbek
1150
Estonian
1305
Kashmiri
1491
Kinyarwanda
1581
Vietnamese
1151
Basque
1307
Kurdish
1495
Sanskrit
1587
Volapuk
1157
Persian
1311
Kirghiz
1498
Sindhi
1613
Wolof
1165
Finnish
1313
Latin
1501
Sangro
1632
Xhosa
1166
Fiji
1326
Lingala
1502
Serbo-Croatian
1665
Yoruba
1171
Faeroese
1327
Laothian
1503
Singhalese
1684
Chinese
1174
French
1332
Lithuanian
1505
Slovak
1697
Zulu
Downloaded
From TheatreSystem-Manual.com Manuals
56
Company
Type
Fuji
Fuji
Fuji
Fuji
Fuji
Fuji
Konica
Kyocera
Kyocera
Kyocera
Kyocera
Minolta
Minolta
Minolta
Nikon
Nikon
Nikon
Nikon
Nikon
Nikon
Nikon
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Panasonic
Panasonic
Panasonic
Panasonic
Pentax
Pentax
Pentax
Pentax
Samsung
Samsung
Toshiba
Nikon
Nikon
Nikon
Panasonic
Minolta
Olympus
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Product
Cruzer Micro
Cruzer Mini
Cruzer Mini
SONY Micro Vault
FLEX DRIVE
AnyDrive
XTICK
Micro Mini
iFlash
LG
RiDATA
Company
Type
Sandisk
Sandisk
Sandisk
Sony
Serotech
A.L tech
LG
Iomega
Imation
XTICK(M)
EZDrive
USB 2.0 USB Flash Drive 128M
USB 2.0 128M
USB 2.0 256M
USB 2.0 64MB
USB 2.0 32MB
USB 2.0 128MB
USB 2.0 128M
USB 2.0 128M
USB 2.0 64M
USB 2.0 64M
USB 2.0 64M
MP3 Player
Product
Company
Type
Creative MuVo NX128M
Iriver H320
YH-920
YP-T7
YP-MT6
YP-T6
YP-53
YP-ST5
YP-T5
YP-60
YP-780
YP-35
YP-55
iAUDIO U2
iAUDIO G3
iAudio M3
SI-M500L
H10
YP-T5 VB
YP-53
Creative
Iriver
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Cowon
Cowon
Cowon
Sharp
Iriver
Samsung
Samsung
128 MB MP3 Player
20G HDD MP3 Player
20G HDD MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
HDD MP3 Player
256MB MP3 Player
MP3 Player
MP3 Player
256MB MP3 Player
USB External HDD
Product
MOMOBAY UX-2
Company
Type
Dvico
USB 2.0
MISCELLANEOUS
1142
Product
Finepix-A340
Finepix-F810
Finepix-F610
Finepix-f450
Finepix S7000
Finepix A310
KD-310Z
Finecam SL300R
Finecam SL400R
Finecam S5R
Finecam Xt
Dimage-Z1
Dimage Z1
Dimage X21
Coolpix4200
Coolpix4300
Coolpix 2200
Coolpix 3500
Coolpix 3700
Coolpix 4100
Coolpix 5200
Stylus 410 digital
300-digital
U300
X-350
C-760
C-5060
X1
U-mini
Lumix-FZ20
DMC-FX7GD
Lumix LC33
LUMIX DMC-F1
Optio-S40
Optio-S50
Optio 33LF
Optio MX
Digimax-420
Digimax-400
Sora PDR-T30
Coolpix 5900
Coolpix S1
Coolpix 7600
DMC-FX7
Dimage Xt
AZ-1
USB Flash Disc
57
Specifications
Power Consumption
Weight
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Distortion
Composite Video
GENERAL
FM TUNER
VIDEO OUTPUT
AMPLIFIER
Component Video
HDMI
Front speaker output
Subwoofer speaker output
Frequency range
S/N Ratio
Channel separation
Input sensitivity
Speaker system
SPEAKER
Warranty
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
60W
11.5 Ibs
18 in. x 12.4 in. x 7.5 in.
41°F ~ 95°F
10% ~ 75%
10dB
60dB
0.5%
1.0Vp-p(75Ω load)
Y:1.0Vp-p(75Ω load)
Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
Impedance: 85~115Ω
100W x 2(3Ω)
100W(3Ω)
20Hz~20KHz
70dB
60dB
(AUX)400mV
2.1ch speaker system
Front speaker
Subwoofer speaker
3Ω (DCR 3.4Ω)
3Ω (DCR 3.4Ω)
150Hz~20kHz
40Hz~200Hz
86dB/W/M
86dB/W/M
100W
100W
200W
200W
6.9in. x 15.3in. x 15.6in.
3.6in. x 10.9in. x 6.2in.
14.6 Ibs
3.1 Ibs
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the original
carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited
warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive
warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be
performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to
SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the responsibility of the
purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if
found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and
must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is
longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise
expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or
serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products,
equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied
and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and
surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered
and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or
other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS
WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING
ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER
BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO
USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN
AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS
PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR
EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
To obtain warranty hardware service, please contact SAMSUNG at:
Samsung Electronics America, Inc.
105 Challenger Road Ridgefield Park, NJ 07660-0511
1-800-SAMSUNG (726-7864) and www.samsung.com
Downloaded
From TheatreSystem-Manual.com Manuals
58
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care centre.
Region
Country
Customer Care Center
Downloaded From TheatreSystem-Manual.com Manuals
Web Site