Table of Contents
Table of Conte nts
Package Contents
Safe ty Inform ation
Syst em Connection
Rem ote Control
LCD Display Syste m
Operation Instruct ions
How to Open the System
How to Play Stereo Audio
How to Use Sleep Mode
(1) Ope rations of the Remote C ontrol
Multi-Fu nction Control Area
FM Control Area
iPod/iPhone Control Area
(2) Ope rations of Touch Key Control System
How to S etup Clock and Ala rm
How to P lay F M Tuner
Insta lling Battery in the Remote Cont rol
Notes abo ut th e Remote Control
Trouble S hoot ing
Caut ion
Package Contents
1. Owner's manual
2. Remote control
3. AC adapter
4. Main unit
Dear Customer:
Thank you for purchasing 2.1 channel music center system. We strongly
recommend that you carefully study the operating instructions before
attempting to operate the unit and that you note the listed safety information.
Safety Information
1. This unit can be used only where the power supply is in accordance with
the notes on the rear panel of the speaker system. It can't be used
2. To reduce the risk of fire or electric shock, do not expose this unit to rain
or moisture.
3. When the unit is not being used, turn the unit off.
4. Do not open covers and repair by yourself. Refer all servicing to qualified
5. After turning off the unit, if you don't start the unit again in 24 hours, the
time would return to the factory reset. When the unit is on, you can adjust
the time, please take the operation instruction in the owner's manual for
6. Remote Control Battery:
The button battery has been installed in the remote control. When using it
for the first time, just pull out the insulation layer and the remote control
will be ready to use.
L/R (150W x 1), Subwoofer (300W x 1)
System Connection
Remote Control
1."Sleep mode" control selector
2.Select the input source
(iPod. AUX. FM.)
3.Tuner number selector
4.iPod/iPhone-toggle repeat selector
5.iPod/iPhone-ok menu selector
6.iPod/iPhone-scroll up/down selector
7.iPod/iPhone -skip selector
8.Select control selector
9.Adjust increase/decrease selector
10.Alarm on/off control selector
11.Tuner band control selector
12.iPod/iPhone-menu selector
13.iPod/iPhone-toggle shuffle selector
14.iPod/iPhone play/pause selector
15.Return to the previous menu
A: FM Control Area
B: iPod/iPhone Control Area
C: Multi-function Control Area
16."Mute mode" control selector
LCD Display System
1. Input Control Area
2. Volume Control Area
3. Tuner Control Area
4. iPod/iPhone Control Area
5. System Control Area
6. Time and Alarm Control Area
First-level Subpage
Second-level Subpage
Third-level Subpage
Operation Instructions
How to Open the System
When the "POWER" in the back panel is on, "WELCOME" will appear on the LCD, when it disappears, it
suggests the system has opened.
How to Play Stereo Audio
Press the "
" key on the remote control to choose the input mode "iPod, AUX, FM".
How to Use Sleep Mode
Sleep mode lets you sleep to your system at the selected time.
1. Press "
" or touch " " to select an amount of time before the system shuts off: 5; 15; 30 minutes;
sleep on or off.
2. Wake up the system by pressing any key when the system in the sleep mode.
(1) Operations of the Remote Control
Multi-function Control Area
1. "
": Select the following four submenu: <tone>, <time>, <alarm>, <source>. Or enter to the
next menu.
2. "
": Return to the previous menu.
3. "
": Adjust settings.
For example:
a. When you want to set the time, press the "
" key and scroll to the <time> menu by press
", followed by the "
" key to enter time setting mode. Press "
to reset the figures of hours, then press the "
" key to set the minutes, after reset it, press
" key again, the time on the screen will flicker continuously to confirm successful time
b. When you want to change the tone settings, scroll to the <tone> menu and press "
" to enter
the "tone menu". Press the "
" key to scroll through the three options: <SW>, <treb>,
<bass>. If you want to adjust the <SW>, press "
" to enter the "SW menu", press "
to adjust the <SW> volume.
c. When you want to set the alarm sound module, scroll to the <source> menu and press "
" to
enter the "source menu". Press the "
"key to scroll through the three options: <buzzer>,
<iPod.s>, <FM.s>. If you want to choose <buzzer>, press "
" then the LCD flicker, it suggest
this function has finished. The other two options have the same operation.
d. When you want to set the alarm, press the "
" key and scroll to the <alarm> menu by press
", followed by the "
" key to enter alarm setting mode. Then Press "
to adjust the hours, then press "
" key to toggle to the minutes setting. Press "
" key after
adjusting the minutes setting, the time on the screen will flicker momentarily to confirm successful
alarm setup. After setting alarm, press the"
" key to turn the alarm on. When alarm is on, the
" " logo will flash all the time, then you can press the"
"; "
" or "
" key to turn off
the alarm. If you choose <FM.s> alarm sound module, the system will turn to FM input mode; if you
choose <iPod.s> alarm sound module, the system will turn to iPod input mode.
FM Control Area
a. Press "
" and select FM mode, the LCD will display the last tuned channel, for example:
b. Use "
" to adjust radio frequency.
c. The number keys (1-10) are used to save up to 10 channels. Tune to your desired FM channel
and hold one of the number keys for 2 seconds to assign that number key to that channel. Anytime
you want to listen to the saved channel, just press on the assigned key number.
iPod/iPhone Control Area
a. Place the iPod/iPhone onto the iPod socket of the unit. The system will turn to the "iPod" input
mode automatically.
b. The middle area of the remote control (B) is especially designed for iPod/iPhone player.
" : Controls the play and pause function of the iPod/iPhone player.
" : Press and hold for 2 seconds to Fast Forward or Fast Reverse.
" : Controls the iPod/iPhone player to play the previous or the next song.
" : Selects the previous file of the iPod/iPhone player.
" : Selects the next file of the iPod/iPhone Player.
" : Selects the iPod/iPhone player to return to the previous submenu.
" : Controls the iPod/iPhone player to enter next submenu.
" : Selects the repeat mode on the iPod/iPhone.
" : Selects the random mode on the iPod/iPhone.
(2) Operations of Touch Key Control System
Return to the previous menu.
Enter to the menu and the operation key of the submenu.
Scroll up or down to different function interfaces.
Select the sleep mode.
a. The main interface of this system shows the clock. Use " , " touch keys to increase or decrease
the master volume. Use " " touch key to enter the first level subpage (control panel). On the control
panel interface, use "
, " keys to select different control partitions.
b. When cursor points to the first level subpage (control panel), use the " " key again to enter the
second level subpage or use " ,
" keys to select different options. Touching the " " key again,
takes you to third level subpage which you can select different options by using the " , " keys.
c. If you want to return to the previous subpage use the " " key. If no operation is done within 5
seconds, the system will return to the main interface page.
How to Setup Clock and Alarm by Touch Key Control System
Take the above operation instruction "(2)a" for reference. When cursor points to the clock and alarm
control interface, touch " " key enter the options interface of clock, alarm and alarm on/off, which
is the second-level subpage. Then, touch " , " for needed operation or touch "
" again to enter
the third-level subpage. At this moment, you can touch" , " to adjust the figures of hour or minute.
After adjustment, touch " " again, the clock icon on the LCD will flicker continuously for 6 times to
show the success of time setup.
When setup alarm, choose alarm option on the second-level subpage, the operation is similar to the
clock setup. After finish the alarm setup, touch "
" key to return the third-level subpage for the
on/off option of alarm.
How to Play FM Tuner by Touch Key Control System
Take the above operation instruction "(2)a" for reference. When the cursor points to the "tuner control
area", touch " " key to enter "ADJUST" option, you can change the needed option through " ,
key, then touch the " " key to enter "ADJUST" status, then touch " , " to up or to down and the
tuner will search manually; choose and enter "AUTO" status, and then touch "
, " to up or down
once( to up, the FM frequency will decrease, otherwise opposite), the tuner will search automatically.
If you want to save the program, just enter the "MEMORY" status, then Press " , " to choose the
channel you want to save. At last, press the "
" once again.
Installing Battery in the Remote Control
Notes about the Remote Control
Trouble Shooting
The system has no power.
Possible Reasons/solutions
The plug is not inserted properly.
The socket has no power.
The fuse is broken.
"POWER" button has not been pressed.
No sound at all.
Incorrect selection of input signal.
If mute state is turned on.
Sound source machine is not powered.
Either of the main channels has
no sound.
The signal plug is connected incorrectly or
lines are short-circuited.
LCD screen displays abnormally.
It may be effected by exterior strong disturbance,
turn off first and then turn on again.
Avoid direct sunlight/heat.
The lightning flash with an equilateral triangle, "Dangerous Voltage", is intended to alert the user to the
presence of uninsulated parts within the product's enclosure that may be of sufficient magnitude to constitute
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
1. READ INSTRUCTIONS-All safety and operating instructions should be read before the appliance is
2. RETAIN INSTRUCTIONS -Safety and operating instructions should be retained for future reference.
3. NOTE WARNINGS-All warnings on the appliance and in the operating instructions should be followed.
4. FOLLOW INSTRUCTIONS -All operating and user instructions should be followed.
5. WATER AND MOISTURE -The appliance should not be used near water; e.g., bathtubs, kitchen sinks,
laundry tubs, damp basements, swimming pools, etc.
6. CARTS AND STANDS-Do not place this product on an unstable cart, stand, tripod, bracket, table, etc.
7. VENTILATION-The appliance should be situated so that its location and position does not interfere with
proper ventilation. The appliance should not be situated on a bed, sofa, rug, or any surface that may
obstruct cabinet openings.
8. HEAT-The appliance should be situated away from heat sources such as radiators, heat registers,
stoves or other devices (including amplifiers) that produce heat.
9. POWER SOURCES -The appliance should be connected only to a power supply of the type described
in the operating instructions or on the appliance. Do not overload wall outlets, extension cords, or
integral convenience outlets as this can result in a risk of fire or electric shock.
10. POWER CORD PROTECTION -Power supply cords should be routed so that they are not likely to be
walked upon or pinched by items placed upon or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit from the appliance.
11. CLEANING-The appliance should be cleaned only with glass cleaner. Do not use chemical cleaners.
12. LIGHTNING STORMS & NO USE PERIODS-The power cord should be unplugged from the outlet
during lightning storms or during long periods of non-use.
13. OBJECT AND LIQUID ENTRY -Care should be taken that objects do not fall onto and liquids are not
spilled on the amplifier or speaker.
14. DAMAGE REQUIRING SERVICE-The appliance should be serviced by qualified service personnel
A. The power supply cord or plug has been damaged ;or
B. Objects have fallen on or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked change in performance; or
E. The appliance has been dropped or the enclosure damaged.
15. SERVICING-The user should not attempt to service the appliance. If parts are replaced during service,
be sure the parts meet factory specification. Inappropriate substitution can result in fire or a risk of electric
shock. Upon completion of service, ask the technician to perform safety checks on the product. For service
and warranty information please check Warranty Card.