Compaq Mini CQ10-100 - PC System information

HP Mini 210, HP Mini 110, Compaq
Mini CQ10
Maintenance and Service Guide
© Copyright 2012 Hewlett-Packard
Development Company, L.P.
Bluetooth is a trademark owned by its
proprietor and used by Hewlett-Packard
Company under license. Intel and Atom are
trademarks or registered trademarks of Intel
Corporation in the United States and other
countries. Microsoft and Windows are U.S.
registered trademarks of Microsoft
Corporation. SD Logo is a trademark of its
proprietor.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: January 2012
Document Part Number: 655762-001
Safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not
place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat
surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface,
such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the
skin or a soft surface, such as pillows or rugs or clothing, during operation. The device and the AC
adapter comply with the user accessible surface temperature limits defined by the International
Standard for Safety of Information Technology Equipment (IEC 60950).
iii
iv
Safety warning notice
Table of contents
1 Product description ........................................................................................................... 1
2 External component identification ..................................................................................... 6
Keys ....................................................................................................................................... 6
Display ................................................................................................................................... 7
Buttons .................................................................................................................................... 8
Lights ...................................................................................................................................... 9
TouchPad .............................................................................................................................. 10
Left side ................................................................................................................................ 11
Right side .............................................................................................................................. 12
Bottom .................................................................................................................................. 13
3 Illustrated parts catalog .................................................................................................. 14
Service tag ............................................................................................................................ 15
Computer major components ................................................................................................... 16
Display assembly subcomponents ............................................................................................. 26
Mass storage devices ............................................................................................................. 28
Miscellaneous parts ................................................................................................................ 29
Sequential part number listing .................................................................................................. 30
4 Removal and replacement procedures ............................................................................ 43
Preliminary replacement requirements ....................................................................................... 43
Tools required ......................................................................................................... 43
Service considerations ............................................................................................. 43
Plastic parts ............................................................................................. 43
Cables and connectors ............................................................................. 43
Drive handling ......................................................................................... 44
Grounding guidelines .............................................................................................. 44
Electrostatic discharge damage .................................................................. 44
Packaging and transporting guidelines ........................................ 46
Component replacement procedures ........................................................................................ 48
v
Service tag ............................................................................................................. 48
Computer feet ......................................................................................................... 49
Battery ................................................................................................................... 50
SIM (select models only) ........................................................................................... 51
WLAN module ........................................................................................................ 52
WWAN module ..................................................................................................... 55
Memory module ...................................................................................................... 57
RTC battery ............................................................................................................ 58
Hard drive ............................................................................................................. 59
Keyboard ............................................................................................................... 61
Top cover ............................................................................................................... 67
Speakers ................................................................................................................ 73
System board ......................................................................................................... 74
Fan ....................................................................................................................... 77
Heat sink ................................................................................................................ 79
Display assembly .................................................................................................... 81
5 Setup Utility (BIOS) and System Diagnostics .................................................................... 87
Using Setup Utility .................................................................................................................. 87
Starting Setup Utility ................................................................................................ 87
Changing the language of Setup Utility ...................................................................... 87
Navigating and selecting in Setup Utility .................................................................... 88
Displaying system information ................................................................................... 88
Restoring factory settings in Setup Utility ..................................................................... 89
Exiting Setup Utility ................................................................................................. 89
Updating the BIOS .................................................................................................. 89
Determining the BIOS version .................................................................... 90
Downloading a BIOS update ..................................................................... 90
Using System Diagnostics ........................................................................................................ 91
6 Specifications ................................................................................................................. 92
Computer specifications .......................................................................................................... 92
10.1-inch WSVGA display specifications .................................................................................. 93
Hard drive specifications ........................................................................................................ 94
7 Backup and recovery ...................................................................................................... 95
Backing up your information .................................................................................................... 96
Performing a system recovery .................................................................................................. 97
Using the Windows recovery tools ............................................................................ 97
Using f11 recovery tools .......................................................................................... 98
vi
Using a Windows 7 operating system DVD (purchased separately) ............................... 98
8 Power cord set requirements ........................................................................................ 100
Requirements for all countries ................................................................................................ 100
Requirements for specific countries and regions ....................................................................... 101
9 Recycling ...................................................................................................................... 103
Index ............................................................................................................................... 104
vii
viii
1
Product description
Category
Description
HP Mini
210
Product Name
HP Mini 210
√
HP Mini
110
√
HP Mini 110
√
Compaq Mini CQ10
Processors
●
Intel® Atom N2800 1.86-GHz processor, dual
core, 1.0-MB L2 cache, 1066-MHz front-side
bus (FSB), 6.5 W
●
Intel Atom N2600 1.60-GHz processor, dual
core, 1.0-MB L2 cache, 800-MHz FSB, 3.5 W
Compaq
Mini CQ10
√
√
√
Processor is soldered to the system board
Chipset
Intel NM10 Express Chipset
√
√
√
Graphics
Internal graphics:
√
√
√
√
√
√
●
Intel Graphics Media Accelerator 3650 on
computer models equipped with an Intel Atom
N2800 processor (shared memory with up to
256-MB supported via Intel DVMT)
●
Intel Graphics Media Accelerator 3600 on
computer models equipped with an Intel Atom
N2600 processor (shared memory with up to
256-MB supported via Intel DVMT)
Supports MPEG2/AVC/H.264/VC1/WMV9, and
Microsoft DX9
Panel
10.1-in, light-emitting diode (LED), WSVGA,
AntiGlare (1024×600) display; typical brightness:
200 nits
All display assemblies include 2 wireless local area
network (WLAN) antenna cables
Supports 16:9 wide aspect ratio
Lighted logo on top bezel
1
Category
Description
HP Mini
210
HP Mini
110
Compaq
Mini CQ10
Memory
One customer-accessible/upgradable memory
module slot
√
√
√
Supports 6.35-cm (2.5-in) hard drives in 9.5-mm
(.37-in) and 7.0-mm (.28-in) thicknesses
√
√
√
Customer-accessible
√
√
√
Serial ATA
√
√
√
Supports Accelerometer hard drive protection
√
√
√
Supports the following configurations:
√
√
√
√
√
√
√
√
DDR3-1066-MHz single channel support (on
computer models equipped with an Intel Atom
N2800 processor), DDR3-800-MHz single channel
support (on computer models equipped with an Intel
Atom N2600 processor)
Supports up to 2-GB of system RAM (2048×1 or
1024×2)
NOTE: 2-GB of system memory is not supported on
computer models equipped with Windows 7 Starter
or Windows 7 Home Basic in the People's Republic
of China.
Hard drives
●
500 GB, 5400 rpm, 9.5 mm
NOTE: A 500-GB hard drive is not supported
on computer models equipped with Windows 7
Starter or Windows 7 Home Basic in the
People's Republic of China.
Audio and video
●
320 GB, 7200 rpm, 7.0 mm
●
320 GB, 5400 rpm, 9.5 and 7.0 mm
●
250 GB, 7200 rpm, 7.0 mm
●
250 GB, 5400 rpm, 9.5 and 7.0 mm
Single digital microphone
HD audio
Ethernet
2
Beats Audio with Beats logo
√
Beats hotkey (fn+b)
√
√
√
2 integrated, boxed stereo speakers, 1.5 W max
√
√
√
HP VGA webcam (fixed, no tilt with activity LED, F/
2.8, 640×480 by 30 frames per second)
√
√
√
Integrated 10/100 RTL8105T-VC-CG network
interface card (NIC)
√
√
√
Chapter 1 Product description
Category
Description
Wireless
External media
cards
HP Mini
210
HP Mini
110
Compaq
Mini CQ10
Integrated wireless local area network (WLAN)
options by way of wireless module
√
√
√
Two WLAN antennas built into display assembly
√
√
√
Support for the following WLAN formats:
√
√
√
Integrated wireless wide area network (WWAN)
options by way of wireless module
√
√
√
Two WWAN antennas built into display assembly
√
√
√
Support for the following WLAN formats:
√
√
√
√
√
√
●
Atheros 9485GN 802.11b/g/n 1×1 WiFi and
3012 Bluetooth 4.0 Combo Adapter
●
Broadcom 4313GN 802.11b/g/n 1×1 WiFi
and 20702 Bluetooth 4.0 Combo Adapter
●
Intel Centrino Advanced-N 6230
WLAN module
●
Ralink 5390GN 802.11b/g/n 1×1
WiFi Adapter
●
HP hs2340 HSPA+ Mobile Broadband Module
●
HP lc2000 HSPA Mobile Broadband Module
●
HP lc2010 HSPA Mobile Broadband Module
Digital Media Slot with push-push technology,
supporting:
●
MultiMediaCard
●
Secure Digital (SD) Memory Card
●
Secure Digital High Capacity (SDHC)
Memory Card
●
Secure Digital Extended Capacity (SDxC)
Supports mini versions by use of an adapter (adapter
is not included).
3
Category
Description
Ports
●
3-pin AC power
●
Audio-in (mono microphone)
●
Audio-out (stereo headphone)
●
RJ-45 (Ethernet, includes link and activity lights)
●
USB 2.0 (3 ports)
●
VGA (Dsub 15 pin) supporting 1920 ×1200
external resolution @ 60Hz, hot plug and
unplug and auto-detection for correct output to
wide-aspect vs. standard aspect video
Keyboard/
pointing devices
93%-size, Island-style, spill-resistant, keyboard with
full numeric keypad
HP Mini
210
HP Mini
110
Compaq
Mini CQ10
√
√
√
√
√
√
Textured, pocket-style keyboard
Power
requirements
4
TouchPad with capacitive multi-touch gestures, 2finger scrolling, and pinch-zoom enabled
√
√
√
Taps enabled by default
√
√
√
40W AC adapter with localized cable plug support
(3-wire plug with ground pin, supports 3-pin
DC connector)
√
√
√
Support for the following batteries:
√
√
√
●
6-cell, 55-Whr, 2.55-Ah Li-ion battery
●
3-cell, 28-Whr, 2.55-Ah Li-ion battery
Security
Supports security lock
√
√
√
Operating system
Preinstalled:
√
√
√
●
Windows 7 Home Basic 32-bit
●
Windows 7 Home Premium 32-bit
●
Windows 7 Professional 32-bit
●
Windows 7 Starter 32-bit
●
USB key recovery support for service, refurbish
centers, and repair centers
Chapter 1 Product description
Category
Description
●
Serviceability
HP Mini
210
Free DOS (does not support Beats Audio,
EnergyStar 5.0, QuickWeb, or
WWAN functionality)
End-user replaceable parts:
●
AC adapter
●
Battery
●
Hard drive
●
Memory module
●
WLAN module
●
WWAN module
√
HP Mini
110
Compaq
Mini CQ10
√
√
√
√
5
2
External component identification
Keys
6
Item
Component
Description
(1)
Action keys
Execute frequently used system functions.
(2)
fn key
Executes frequently used system functions when pressed
in combination with a function key, the num lk key, or the
esc key.
(3)
Windows logo key
Displays the Windows Start menu.
(4)
Windows applications key
Displays a shortcut menu for items beneath the pointer.
Chapter 2 External component identification
Display
Item
Component
Description
(1)
WLAN antennas (2)*
Send and receive wireless signals to communicate
with WLANs.
(2)
WWAN antennas (2)*
Send and receive wireless signals to communicate
with WWANs.
(3)
Internal microphone
Records sound.
(4)
Webcam
Records video and captures still photographs.
To use the webcam, double-click the ArcSoft Camera
Suite icon on the desktop, or select Start > All
Programs > ArcSoft Camera Suite > Launch
WebCam Companion.
(5)
Webcam light
On: The webcam is in use.
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around
the antennas free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety, and
Environmental Notices that applies to your country or region. These notices are located in Help and Support.
Display
7
Buttons
Item
Component
Description
(1)
Power button
●
When the computer is off, press the button to turn on
the computer.
●
When the computer is on, press the button briefly to
initiate Sleep.
●
When the computer is in the Sleep state, press the
button briefly to exit Sleep.
●
When the computer is in Hibernation, press the
button briefly to exit Hibernation.
If the computer has stopped responding and Windows
shutdown procedures are ineffective, press and hold the
power button for at least 5 seconds to turn off
the computer.
To learn more about your power settings, select Start >
Control Panel > System and Security > Power
Options, or refer to the HP Notebook Reference Guide.
(2)
8
Web browser button
Chapter 2 External component identification
When the computer is in Microsoft Windows, press the
button to open the default Web browser.
Lights
Item
Component
Description
(1)
Power light
●
White: The computer is on.
●
Blinking white: The computer is in the Sleep state.
●
Off: The computer is off or in Hibernation.
●
Amber: Computer sound is off.
●
Off: Computer sound is on.
●
White: An integrated wireless device, such as a
WLAN device and/or a Bluetooth device, is on.
●
Amber: All wireless devices are off.
(2)
(3)
Mute light
Wireless light
(4)
Caps lock light
On: Caps lock is on.
(5)
TouchPad light
●
Off: The TouchPad is on.
●
Amber: The TouchPad is off.
Lights
9
TouchPad
10
Item
Component
Description
(1)
TouchPad light
●
On: The TouchPad is on.
●
Amber: The TouchPad is off.
(2)
TouchPad on/off button
Quickly double-tap the TouchPad on/off button to turn the
TouchPad off and on.
(3)
TouchPad zone
Moves the pointer and selects or activates items on
the screen.
(4)
Left TouchPad button
Functions like the left button on an external mouse.
(5)
Right TouchPad button
Functions like the right button on an external mouse.
Chapter 2 External component identification
Left side
Item
Component
Description
(1)
External monitor port
Connects an external VGA monitor or projector.
(2)
Power connector
Connects an AC adapter.
(3)
AC adapter/battery light
●
Amber: The computer is connected to external
power, and the battery is charging.
●
White: The computer is connected to external
power, and the battery is fully charged.
●
Blinking white: The computer is in the Sleep state, or
the battery charge level is 10% or less (recharge the
battery as soon as possible).
●
Off: The computer is not connected to
external power.
(4)
Vents
Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during
routine operation.
(5)
USB 2.0 port
Connect an optional USB 2.0 device.
(6)
Hard drive light
On : The hard drive is being accessed.
Left side
11
Right side
Item
Component
Description
(1)
Digital Media Slot
Supports the following digital card formats:
●
MultiMediaCard
●
Secure Digital (SD) Memory Card
●
Secure Digital High Capacity (SDHC) Memory Card
●
Secure Digital Extended Capacity (SDxC)
Supports mini versions by use of an adapter (adapter is
not included).
(2)
Audio-out (headphone) jack
Produce sound when connected to optional powered
stereo speakers, headphones, ear buds, a headset, or
television audio.
WARNING! To reduce the risk of personal injury,
adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety information,
refer to the Regulatory, Safety, and Environmental
Notices.
When a device is connected to the jack, the computer
speakers are disabled.
(3)
Audio-in (microphone) jack
Connects an optional computer headset microphone,
stereo array microphone, or monaural microphone.
(4)
Security cable slot
Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a
deterrent, but it may not prevent the computer from being
mishandled or stolen.
12
(5)
USB 2.0 ports (2)
Connects optional USB 2.0 devices.
(6)
RJ-45 (network) jack
Connects a network cable.
Chapter 2 External component identification
Bottom
Item
Component
Description
(1)
Battery bay
Holds the battery and the subscriber identity module
(SIM) slot.
(2)
Battery/service cover release latch
Releases the battery from the battery bay and the service
cover from the computer.
(3)
Service cover
Provides access to the hard drive bay, the memory
module slot, the WLAN module, and the WWAN module
(select models only).
Bottom
13
3
14
Illustrated parts catalog
Chapter 3 Illustrated parts catalog
Service tag
When ordering parts or requesting information, provide the computer serial number and model
description provided on the service tag.
Item
Description
Function
(1)
Product name
This is the product name affixed to the front of
the computer.
(2)
Serial number (s/n)
This is an alphanumeric identifier that is unique to
each product.
(3)
Part number/Product number (p/n)
This number provides specific information about the
product's hardware components. The part number
helps a service technician to determine what
components and parts are needed.
(4)
Warranty period
This number describes the duration of the warranty
period for the computer.
(5)
Model description
This is the alphanumeric identifier used to locate
documents, drivers, and support for the computer.
Service tag
15
Computer major components
16
Chapter 3 Illustrated parts catalog
Item
Component
(1)
Display assembly, 10.1-in (includes display panel cable, 2 WLAN antenna transceivers and cables, and
webcamera/microphone module and cable):
BrightView, WSVGA display assembly for use only on Compaq Mini CQ10
computer models
664894-001
BrightView, WSVGA display assembly in black finish for use only on HP Mini 110
computer models equipped with WWAN capability (includes WWAN antenna cables
and transceivers)
668166-001
BrightView, WSVGA display assembly in black finish for use only on HP Mini 110
computer models
658507-001
BrightView, WSVGA display assembly in Pacific blue finish for use only on HP Mini
110 computer models
658510-001
BrightView, WSVGA display assembly in Sonora red finish for use only on HP Mini
110 computer models
658508-001
FlushGlass, HD display assembly in charcoal finish for use only on HP Mini 210
computer models equipped with WWAN capability (includes WWAN antenna cables
and transceivers)
650712-001
FlushGlass, HD display assembly in charcoal finish for use only on HP Mini 210
computer models
668156-001
FlushGlass, HD display assembly in crimson red finish for use only on HP Mini 210
computer models
668159-001
FlushGlass, HD display assembly in luminous rose finish for use only on HP Mini 210
computer models
668158-001
FlushGlass, HD display assembly in ocean drive finish for use only on HP Mini 210
computer models
668157-001
FlushGlass, HD display assembly in sweet purple finish for use only on HP Mini 210
computer models
668160-001
WSVGA, HD display assembly in charcoal finish for use only on HP Mini 210
computer models equipped with WWAN capability (includes WWAN antenna cables
and transceivers)
650719-001
WSVGA, HD display assembly in charcoal finish for use only on HP Mini 210
computer models
668161-001
WSVGA, HD display assembly in crimson red finish for use only on HP Mini 210
computer models
668164-001
WSVGA, HD display assembly in luminous rose finish for use only on HP Mini 210
computer models
668163-001
WSVGA, HD display assembly in ocean drive finish for use only on HP Mini 210
computer models
668162-001
WSVGA, HD display assembly in sweet purple finish for use only on HP Mini 210
computer models
668165-001
NOTE:
(2)
Spare part number
For more display assembly spare part information, see Display assembly subcomponents on page 26.
Keyboard (includes keyboard cable):
Computer major components
17
Item
Component
Spare part number
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models:
For use in Belgium
658517-A41
For use in Bulgaria
658517-261
For use in Canada
658517-121
For use in the Czech Republic and Slovakia
658517-FL1
For use in Denmark, Finland, and Norway
658517-DH1
For use in France
658517-051
For use in Germany
658517-041
For use in Greece
658517-DJ1
For use in Hungary
658517-211
For use in Israel
658517-BB1
For use in Italy
658517-061
For use in Japan
658517-291
For use in Latin America
658517-161
For use in the Netherlands
658517-B31
For use in Portugal
658517-131
For use in Russia
658517-251
For use in Saudi Arabia
658517-171
For use in Slovenia
658517-BA1
For use in South Korea
658517-AD1
For use in Spain
658517-071
For use in Switzerland
658517-BG1
For use in Taiwan
658517-AB1
For use in Thailand
658517-281
For use in Turkey
658517-141
For use in the United Kingdom and Singapore
658517-031
For use in the United States
658517-001
Keyboard in charcoal finish for use only on HP Mini 210 computer models:
18
For use in Belgium
665962-A41
For use in Bulgaria
665962-261
For use in Canada
665962-121
For use in the Czech Republic and Slovakia
665962-FL1
Chapter 3 Illustrated parts catalog
Item
Component
Spare part number
For use in Denmark, Finland, and Norway
665962-DH1
For use in France
665962-051
For use in Germany
665962-041
For use in Greece
665962-DJ1
For use in Hungary
665962-211
For use in India
665962-D61
For use in Israel
665962-BB1
For use in Italy
665962-061
For use in Japan
665962-291
For use in Latin America
665962-161
For use in the Netherlands
665962-B31
For use in Portugal
665962-131
For use in Russia
665962-251
For use in Saudi Arabia
665962-171
For use in Slovenia
665962-BA1
For use in South Korea
665962-AD1
For use in Spain
665962-071
For use in Switzerland
665962-BG1
For use in Taiwan
665962-AB1
For use in Thailand
665962-281
For use in Turkey
665962-141
For use in the United Kingdom and Singapore
665962-031
For use in the United States
665962-001
Keyboard in crimson red finish for use only on HP Mini 210 computer models:
For use in Belgium
665965-A41
For use in Bulgaria
665965-261
For use in Canada
665965-121
For use in the Czech Republic and Slovakia
665965-FL1
For use in Denmark, Finland, and Norway
665965-DH1
For use in France
665965-051
For use in Germany
665965-041
For use in Greece
665965-DJ1
Computer major components
19
Item
Component
Spare part number
For use in Hungary
665965-211
For use in India
665965-D61
For use in Israel
665965-BB1
For use in Italy
665965-061
For use in Japan
665965-291
For use in Latin America
665965-161
For use in the Netherlands
665965-B31
For use in Portugal
665965-131
For use in Russia
665965-251
For use in Saudi Arabia
665965-171
For use in Slovenia
665965-BA1
For use in South Korea
665965-AD1
For use in Spain
665965-071
For use in Switzerland
665965-BG1
For use in Taiwan
665965-AB1
For use in Thailand
665965-281
For use in Turkey
665965-141
For use in the United Kingdom and Singapore
665965-031
For use in the United States
665965-001
Keyboard in luminous rose finish for use only on HP Mini 210 computer models:
20
For use in Belgium
665964-A41
For use in Bulgaria
665964-261
For use in Canada
665964-121
For use in the Czech Republic and Slovakia
665964-FL1
For use in Denmark, Finland, and Norway
665964-DH1
For use in France
665964-051
For use in Germany
665964-041
For use in Greece
665964-DJ1
For use in Hungary
665964-211
For use in India
665964-D61
For use in Israel
665964-BB1
For use in Italy
665964-061
Chapter 3 Illustrated parts catalog
Item
Component
Spare part number
For use in Japan
665964-291
For use in Latin America
665964-161
For use in the Netherlands
665964-B31
For use in Portugal
665964-131
For use in Russia
665964-251
For use in Saudi Arabia
665964-171
For use in Slovenia
665964-BA1
For use in South Korea
665964-AD1
For use in Spain
665964-071
For use in Switzerland
665964-BG1
For use in Taiwan
665964-AB1
For use in Thailand
665964-281
For use in Turkey
665964-141
For use in the United Kingdom and Singapore
665964-031
For use in the United States
665964-001
Keyboard in ocean drive finish for use only on HP Mini 210 computer models:
For use in Belgium
665963-A41
For use in Bulgaria
665963-261
For use in Canada
665963-121
For use in the Czech Republic and Slovakia
665963-FL1
For use in Denmark, Finland, and Norway
665963-DH1
For use in France
665963-051
For use in Germany
665963-041
For use in Greece
665963-DJ1
For use in Hungary
665963-211
For use in India
665963-D61
For use in Israel
665963-BB1
For use in Italy
665963-061
For use in Japan
665963-291
For use in Latin America
665963-161
For use in the Netherlands
665963-B31
For use in Portugal
665963-131
Computer major components
21
Item
Component
Spare part number
For use in Russia
665963-251
For use in Saudi Arabia
665963-171
For use in Slovenia
665963-BA1
For use in South Korea
665963-AD1
For use in Spain
665963-071
For use in Switzerland
665963-BG1
For use in Taiwan
665963-AB1
For use in Thailand
665963-281
For use in Turkey
665963-141
For use in the United Kingdom and Singapore
665963-031
For use in the United States
665963-001
Keyboard in sweet purple finish for use only on HP Mini 210 computer models:
22
For use in Belgium
665966-A41
For use in Bulgaria
665966-261
For use in Canada
665966-121
For use in the Czech Republic and Slovakia
665966-FL1
For use in Denmark, Finland, and Norway
665966-DH1
For use in France
665966-051
For use in Germany
665966-041
For use in Greece
665966-DJ1
For use in Hungary
665966-211
For use in India
665966-D61
For use in Israel
665966-BB1
For use in Italy
665966-061
For use in Japan
665966-291
For use in Latin America
665966-161
For use in the Netherlands
665966-B31
For use in Portugal
665966-131
For use in Russia
665966-251
For use in Saudi Arabia
665966-171
For use in Slovenia
665966-BA1
For use in South Korea
665966-AD1
Chapter 3 Illustrated parts catalog
Item
(3)
Component
Spare part number
For use in Spain
665966-071
For use in Switzerland
665966-BG1
For use in Taiwan
665966-AB1
For use in Thailand
665966-281
For use in Turkey
665966-141
For use in the United Kingdom and Singapore
665966-031
For use in the United States
665966-001
Top cover (includes TouchPad board and bracket):
In black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
663677-001
In charcoal finish for use only on HP Mini 210 computer models
650747-001
In crimson red finish for use only on HP Mini 210 computer models
650752-001
In luminous rose finish for use only on HP Mini 210 computer models
650751-001
In ocean drive finish for use only on HP Mini 210 computer models
650748-001
In Pacific blue finish for use only on HP Mini 110 computer models
658515-001
In Sonora red finish for use only on HP Mini 110 computer models
658513-001
In sweet purple finish for use only on HP Mini 210 computer models
654204-001
(4)
Speakers (include cables)
650736-001
(5)
System board (includes processor and replacement thermal material):
For use only with Beats Edition computer models equipped with an Intel Atom N2800
1.86-GHz processor and WWAN capability (1.0-MB L2 cache, dual core, 6.5 W)
667753-001
For use only with non-Beats Edition computer models equipped with an Intel Atom
N2800 1.86-GHz processor and WWAN capability (1.0-MB L2 cache,
dual core, 6.5 W)
676912-001
For use only with Beats Edition computer models equipped with an Intel Atom N2800
1.86-GHz processor, but not WWAN capability (1.0-MB L2 cache, dual core, 6.5 W)
667752-001
For use only with non-Beats Edition computer models equipped with an Intel Atom
N2800 1.86-GHz processor, but not WWAN capability (1.0-MB L2 cache,
dual core, 6.5 W)
676911-001
For use only with Beats Edition computer models equipped with an Intel Atom N2600
1.60-GHz processor and WWAN capability (1.0-MB L2 cache, dual core, 3.5 W)
667751-001
For use only with non-Beats Edition computer models equipped with an Intel Atom
N2600 1.60-GHz processor and WWAN capability (1.0-MB L2 cache,
dual core, 3.5 W)
676910-001
For use only with Beats Edition computer models equipped with an Intel Atom N2600
1.60-GHz processor, but not WWAN capability (1.0-MB L2 cache, dual core, 3.5 W)
667750-001
Computer major components
23
Item
Component
Spare part number
For use only with non-Beats Edition computer models equipped with an Intel Atom
N2600 1.60-GHz processor, but not WWAN capability (1.0-MB L2 cache,
dual core, 3.5 W)
676909-001
(6)
Heat sink (includes replacement thermal material)
651898-001
(7)
Fan
651897-001
(8)
Power connector cable
656095-001
(9)
Battery:
(10)
646757-001
3-cell, 28-Wh, 2.55-Ah, Li-ion battery
646755-001
Base enclosure:
For use only with Beats Edition computer models
650710-001
For use only with non-Beats Edition computer models
663675-001
(11)
2-GB memory module (PC3, 10600, 1333-MHz):
621565-001
(12)
WWAN module:
HP hs2340 HSPA+ Mobile Broadband Module
632155-001
HP lc2000 HSPA Mobile Broadband Module
612599-001
HP lc2010 HSPA Mobile Broadband Module
612600-001
(13)
RTC battery
599516-001
(14)
WLAN module:
(15)
(16)
24
6-cell, 55-Wh, 2.55-Ah, Li-ion battery
Atheros 9485GN 802.11b/g/n 1×1 WiFi and 3012 Bluetooth 4.0 Combo Adapter
655795-001
Broadcom 4313GN 802.11b/g/n 1×1 WiFi and 20702 Bluetooth 4.0
Combo Adapter
657325-001
Intel Centrino Advanced-N 6230 WLAN module
631956-001
Ralink 5390GN 802.11b/g/n 1×1 WiFi Adapter
630703-001
Hard drive (2.5-in, 7.0-mm, SATA; does not include hard drive bracket, hard drive connector cable, hard drive
rubber isolators, screws):
500-GB, 5400-rpm
634932-001
320-GB, 5400-rpm
645193-001
250-GB, 5400-rpm
645191-001
Hard Drive Hardware Kit (not illustrated, includes hard drive bracket, hard drive
connector cable, hard drive rubber isolators, and screws)
664913-001
Service cover:
Service cover in black finish for use only on Compaq Mini CQ10 and HP Mini 110
computer models
663676-001
Service cover in charcoal finish for use only on HP Mini 210 computer models
650727-001
Chapter 3 Illustrated parts catalog
Item
(17)
Component
Spare part number
Service cover in crimson red finish for use only on HP Mini 210 computer models
650732-001
Service cover in luminous rose for use only on HP Mini 210 computer models
650731-001
Service cover in ocean drive for use only on HP Mini 210 computer models
650728-001
Service cover in sweet purple finish for use only on HP Mini 210 computer models
654203-001
Corner covers
652308-001
Rubber Kit (includes 2 rubber feet)
650734-001
Computer major components
25
Display assembly subcomponents
26
Item
Component
(1)
Display bezel:
Spare part number
For use only on Compaq Mini CQ10 computer models
658504-001
For use only on HP Mini 110 computer models
658503-001
(2)
Webcam/microphone module
658516-001
(3)
10.1-in, LED, BrightView, WSVGA display panel
658511-001
(4)
Display Hinge Kit (includes left and right display hinges and brackets)
650711-001
(5)
Display Cable Kit (includes display panel cable and webcamera/microphone
module cable)
658505-001
(6)
Antenna Kit (includes left and right wireless antenna cables and transceivers)
658498-001
(7)
Display enclosure
Chapter 3 Illustrated parts catalog
Item
Component
Spare part number
For use only on Compaq Mini CQ10 computer models
658518-001
In black finish for use only on HP Mini 110 computer models
658499-001
In Pacific blue finish for use only on HP Mini 110 computer models
658502-001
In Sonora red finish for use only on HP Mini 110 computer models
658500-001
Display assembly subcomponents
27
Mass storage devices
Item
Component
Spare part number
(1)
Hard drive (2.5-in, 7.0-mm, SATA; does not include hard drive connector cable, hard drive bracket, or screws):
500-GB, 5400-rpm
634932-001
320-GB, 5400-rpm
645193-001
250-GB, 5400-rpm
645191-001
Hard Drive Hardware Kit, includes:
664913-001
(2a)
Hard drive bracket
(2b)
Hard drive connector cable
(2c)
Hard drive rubber isolators (2)
Screws (not illustrated)
(3)
28
USB external DVD±RW DL SuperMulti Drive
Chapter 3 Illustrated parts catalog
659940-001
Miscellaneous parts
Component
Spare part number
40-W HP Smart AC adapter (RC/V 2-wire)
624502-001
HP mobile optical wireless 2.4-GHz mouse
597587-001
HP protective mini sleeve:
In charcoal finish
631188-001
In crimson red finish
628348-001
In luminous rose finish
628344-001
In ocean drive finish
628346-001
Power cord (3-pin, black, 1.83-m):
For use in Argentina
490371-D01
For use in Australia
490371-011
For use in Denmark
490371-081
For use in Europe
490371-021
For use in India
490371-D61
For use in Israel
490371-BB1
For use in Italy
490371-061
For use in Japan
490371-291
For use in North America
490371-001
For use in the People's Republic of China
490371-AA1
For use in South Africa
490371-AR1
For use in South Korea
490371-AD1
For use in Switzerland
490371-111
For use in Taiwan
490371-AB1
For use in Thailand
490371-201
For use in the United Kingdom and Singapore
490371-031
Screw Kit
650735-001
Miscellaneous parts
29
Sequential part number listing
30
Spare part number
Description
490371-001
Power cord for use in North America (3-pin, black, 1.83-m)
490371-011
Power cord for use in Australia (3-pin, black, 1.83-m)
490371-021
Power cord for use in Europe (3-pin, black, 1.83-m)
490371-031
Power cord for use in the United Kingdom and Singapore (3-pin, black, 1.83-m)
490371-061
Power cord for use in Italy (3-pin, black, 1.83-m)
490371-081
Power cord for use in Denmark (3-pin, black, 1.83-m)
490371-111
Power cord for use in Switzerland (3-pin, black, 1.83-m)
490371-201
Power cord for use in Thailand (3-pin, black, 1.83-m)
490371-291
Power cord for use in Japan (3-pin, black, 1.83-m)
490371-AA1
Power cord for use in the People's Republic of China (3-pin, black, 1.83-m)
490371-AB1
Power cord for use in Taiwan (3-pin, black, 1.83-m)
490371-AD1
Power cord for use in South Korea (3-pin, black, 1.83-m)
490371-AR1
Power cord for use in South Africa (3-pin, black, 1.83-m)
490371-BB1
Power cord for use in Israel (3-pin, black, 1.83-m)
490371-D01
Power cord for use in Argentina (3-pin, black, 1.83-m)
490371-D61
Power cord for use in India (3-pin, black, 1.83-m)
597587-001
HP 2.4-GHz wireless optical mouse
599516-001
RTC battery
612599-001
HP lc2000 HSPA Mobile Broadband Module
612600-001
HP lc2010 HSPA Mobile Broadband Module
621565-001
2-GB memory module (PC3, 10600, 1333-MHz)
624502-001
40-W HP Smart AC adapter (RC/V 2-wire)
628344-001
HP mini sleeve in luminous rose finish
628346-001
HP mini sleeve in ocean drive finish
628348-001
HP mini sleeve in crimson red finish
630703-001
Ralink 5390GN 802.11b/g/n 1×1 WiFi Adapter
631188-001
HP mini sleeve in charcoal finish
631956-001
Intel Centrino Advanced-N 6230 WLAN module
632155-001
HP hs2340 HSPA+ Mobile Broadband Module
Chapter 3 Illustrated parts catalog
Spare part number
Description
634932-001
500-GB, 5400-rpm, 7.0-mm hard drive (does not include hard drive bracket, hard drive connector
cable, hard drive rubber isolators, or screws)
NOTE: The hard drive bracket, hard drive connector cable, hard drive rubber isolators, and
screws are included in the Hard Drive Hardware Kit, spare part number 664913-001.
645191-001
250-GB, 5400-rpm, 7.0-mm hard drive (does not include hard drive bracket, hard drive connector
cable, hard drive rubber isolators, or screws)
NOTE: The hard drive bracket, hard drive connector cable, hard drive rubber isolators, and
screws are included in the Hard Drive Hardware Kit, spare part number 664913-001.
645193-001
320-GB, 5400-rpm, 7.0-mm hard drive (does not include hard drive bracket, hard drive connector
cable, hard drive rubber isolators, or screws)
NOTE: The hard drive bracket, hard drive connector cable, hard drive rubber isolators, and
screws are included in the Hard Drive Hardware Kit, spare part number 664913-001.
646755-001
3-cell, 28-Wh, 2.55-Ah, Li-ion battery
646757-001
6-cell, 55-Wh, 2.55-Ah, Li-ion battery
650710-001
Base enclosure for use only with Beats Edition computer models
650711-001
Display hinges (includes left and right display hinges)
650712-001
10.1-in, FlushGlass, HD display assembly in charcoal finish for use only on HP Mini 210
computer models with WWAN capability (includes display panel cable, webcamera/microphone
module, WLAN antenna cables and transceivers, and WWAN antenna cables and transceivers)
650719-001
10.1-in, WSVGA, HD display assembly in charcoal finish for use only on HP Mini 210
computer models with WWAN capabilty (includes display panel cable, webcamera/microphone
module, WLAN antenna cables and transceivers, and WWAN antenna cables and transceivers)
650727-001
Service cover in charcoal finish
650728-001
Service cover in ocean drive finish
650731-001
Service cover in luminous rose finish
650732-001
Service cover in crimson red finish
650734-001
Rubber Kit (includes 2 base enclosure rubber feet)
650735-001
Screw Kit
650736-001
Speakers (includes left and right speakers and cables)
650747-001
Top cover in charcoal finish for use only on HP Mini 210 computer models (includes TouchPad
board and bracket)
650748-001
Top cover in ocean drive finish for use only on HP Mini 210 computer models (includes TouchPad
board and bracket)
650751-001
Top cover in luminous rose finish for use only on HP Mini 210 computer models (includes TouchPad
board and bracket)
650752-001
Top cover in crimson red finish for use only on HP Mini 210 computer models (includes TouchPad
board and bracket)
651897-001
Fan
Sequential part number listing
31
32
Spare part number
Description
651898-001
Heat sink (includes replacement thermal material)
652308-001
Corner covers (includes left and right corner covers)
654203-001
Service cover in sweet purple finish
654204-001
Top cover in sweet purple finish for use only on HP Mini 210 computer models (includes TouchPad
board and bracket)
655795-001
Atheros 9485GN 802.11b/g/n 1×1 WiFi and 3012 Bluetooth 4.0 Combo Adapter
656095-001
Power connector cable
657325-001
Broadcom 4313GN 802.11b/g/n 1×1 WiFi and 20702 Bluetooth 4.0 Combo Adapter
658498-001
Antenna Kit (includes WLAN antenna cables and transceivers and WWAN antenna cables
and transceivers)
658499-001
Display enclosure in black finish
658500-001
Display enclosure in Sonora red finish
658502-001
Display enclosure in Pacific blue finish
658503-001
Display bezel for use only on HP Mini 110 computer models
658504-001
Display bezel for use only on Compaq Mini CQ10 computer models
658505-001
Display panel cable (includes display panel cable and webcamera/microphone module cable)
658507-001
10.1-in, BrightView, WSVGA display assembly in black finish for use only on HP Mini 110
computer models (includes display panel cable, webcamera/microphone module, and WLAN
antenna cables and transceivers)
658508-001
10.1-in, BrightView, WSVGA display assembly in Sonora Red finish for use only on HP Mini 110
computer models (includes display panel cable, webcamera/microphone module, and WLAN
antenna cables and transceivers)
658510-001
10.1-in, BrightView, WSVGA display assembly in Pacific Blue finish for use only on HP Mini 110
computer models (includes display panel cable, webcamera/microphone module, and WLAN
antenna cables and transceivers)
658511-001
10.1-in, WSVGA, display panel
658513-001
Top cover in Sonora Red finish for use only on HP Mini 110 computer models (includes TouchPad
board and bracket)
658515-001
Top cover in Pacific Blue finish for use only on HP Mini 110 computer models (includes TouchPad
board and bracket)
658516-001
Webcamera/microphone module (includes double-sided tape)
658517-001
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in the United States (includes keyboard cable)
658517-031
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in the United Kingdom and Singapore (includes keyboard cable)
658517-041
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Germany (includes keyboard cable)
Chapter 3 Illustrated parts catalog
Spare part number
Description
658517-051
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in France (includes keyboard cable)
658517-061
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Italy (includes keyboard cable)
658517-071
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Spain (includes keyboard cable)
658517-121
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Canada (includes keyboard cable)
658517-131
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Portugal (includes keyboard cable)
658517-141
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Turkey (includes keyboard cable)
658517-161
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Latin America (includes keyboard cable)
658517-171
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Saudi Arabia (includes keyboard cable)
658517-211
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
use in Hungary (includes keyboard cable)
658517-251
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Russia (includes keyboard cable)
658517-261
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Bulgaria (includes keyboard cable)
658517-281
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Thailand (includes keyboard cable)
658517-291
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Japan (includes keyboard cable)
658517-A41
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Belgium (includes keyboard cable)
658517-AB1
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Taiwan (includes keyboard cable)
658517-AD1
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in South Korea (includes keyboard cable)
658517-B31
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in the Netherlands (includes keyboard cable)
658517-BA1
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Slovenia (includes keyboard cable)
658517-BB1
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Israel (includes keyboard cable)
658517-BG1
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Switzerland (includes keyboard cable)
Sequential part number listing
33
34
Spare part number
Description
658517-D61
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in India (includes keyboard cable)
658517-DH1
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Denmark, Finland, and Norway (includes keyboard cable)
658517-DJ1
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in Greece (includes keyboard cable)
658517-FL1
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
in the Czech Republic and Slovakia (includes keyboard cable)
658518-001
Display enclosure for use only on Compaq Mini CQ10 computer models
659940-001
External USB DVD±RW DL SuperMulti Drive
663675-001
Base enclosure for use only with non-Beats Edition computer models
663676-001
Service door for use only on Compaq Mini CQ10 computer models
663677-001
Top cover in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
(includes TouchPad board and bracket)
664894-001
10.1-in, BrightView, WSVGA display assembly for use only on Compaq Mini CQ10
computer models (includes display panel cable, webcamera/microphone module, and WLAN
antenna cables and transceivers)
664913-001
Hard Drive Hardware Kit (includes hard drive bracket, hard drive connector cable, hard drive
rubber isolators, and screws)
665962-001
Keyboard in charcoal finish for use only on HP Mini 210 computer models in the United States
(includes keyboard cable)
665962-031
Keyboard in charcoal finish for use only on HP Mini 210 computer models in the United Kingdom
and Singapore (includes keyboard cable)
665962-041
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Germany (includes
keyboard cable)
665962-051
Keyboard in charcoal finish for use only on HP Mini 210 computer models in France (includes
keyboard cable)
665962-061
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Italy (includes
keyboard cable)
665962-071
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Spain (includes
keyboard cable)
665962-121
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Canada (includes
keyboard cable)
665962-131
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Portugal (includes
keyboard cable)
665962-141
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Turkey (includes
keyboard cable)
665962-161
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Latin America
(includes keyboard cable)
665962-171
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Saudi Arabia
(includes keyboard cable)
Chapter 3 Illustrated parts catalog
Spare part number
Description
665962-211
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Hungary (includes
keyboard cable)
665962-251
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Russia (includes
keyboard cable)
665962-261
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Bulgaria (includes
keyboard cable)
665962-281
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Thailand (includes
keyboard cable)
665962-291
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Japan (includes
keyboard cable)
665962-A41
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Belgium (includes
keyboard cable)
665962-AB1
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Taiwan (includes
keyboard cable)
665962-AD1
Keyboard in charcoal finish for use only on HP Mini 210 computer models in South Korea (includes
keyboard cable)
665962-B31
Keyboard in charcoal finish for use only on HP Mini 210 computer models in the Netherlands
(includes keyboard cable)
665962-BA1
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Slovenia (includes
keyboard cable)
665962-BB1
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Israel (includes
keyboard cable)
665962-BG1
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Switzerland (includes
keyboard cable)
665962-D61
Keyboard in charcoal finish for use only on HP Mini 210 computer models in India (includes
keyboard cable)
665962-DH1
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Denmark, Finland,
and Norway (includes keyboard cable)
665962-DJ1
Keyboard in charcoal finish for use only on HP Mini 210 computer models in Greece (includes
keyboard cable)
665962-FL1
Keyboard in charcoal finish for use only on HP Mini 210 computer models in the Czech Republic
and Slovakia (includes keyboard cable)
665963-001
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in the United States
(includes keyboard cable)
665963-031
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in the United
Kingdom and Singapore (includes keyboard cable)
665963-041
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Germany (includes
keyboard cable)
665963-051
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in France (includes
keyboard cable)
Sequential part number listing
35
36
Spare part number
Description
665963-061
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Italy (includes
keyboard cable)
665963-071
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Spain (includes
keyboard cable)
665963-121
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Canada (includes
keyboard cable)
665963-131
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Portugal (includes
keyboard cable)
665963-141
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Turkey (includes
keyboard cable)
665963-161
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Latin America
(includes keyboard cable)
665963-171
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Saudi Arabia
(includes keyboard cable)
665963-211
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Hungary (includes
keyboard cable)
665963-251
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Russia (includes
keyboard cable)
665963-261
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Bulgaria (includes
keyboard cable)
665963-281
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Thailand (includes
keyboard cable)
665963-291
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Japan (includes
keyboard cable)
665963-A41
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Belgium (includes
keyboard cable)
665963-AB1
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Taiwan (includes
keyboard cable)
665963-AD1
Keyboard in ocean drive for use only on HP Mini 210 computer models in South Korea (includes
keyboard cable)
665963-B31
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in the Netherlands
(includes keyboard cable)
665963-BA1
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Slovenia (includes
keyboard cable)
665963-BB1
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Israel (includes
keyboard cable)
665963-BG1
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Switzerland
(includes keyboard cable)
665963-D61
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in India (includes
keyboard cable)
Chapter 3 Illustrated parts catalog
Spare part number
Description
665963-DH1
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Denmark, Finland,
and Norway (includes keyboard cable)
665963-DJ1
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in Greece (includes
keyboard cable)
665963-FL1
Keyboard in ocean drive finish for use only on HP Mini 210 computer models in the Czech
Republic and Slovakia (includes keyboard cable)
665964-001
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in the United States
(includes keyboard cable)
665964-031
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in the United
Kingdom and Singapore (includes keyboard cable)
665964-041
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Germany
(includes keyboard cable)
665964-051
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in France (includes
keyboard cable)
665964-061
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Italy (includes
keyboard cable)
665964-071
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Spain (includes
keyboard cable)
665964-121
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Canada
(includes keyboard cable)
665964-131
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Portugal
(includes keyboard cable)
665964-141
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Turkey (includes
keyboard cable)
665964-161
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Latin America
(includes keyboard cable)
665964-171
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Saudi Arabia
(includes keyboard cable)
665964-211
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Hungary
(includes keyboard cable)
665964-251
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Russia (includes
keyboard cable)
665964-261
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Bulgaria
(includes keyboard cable)
665964-281
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Thailand
(includes keyboard cable)
665964-291
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Japan (includes
keyboard cable)
665964-A41
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Belgium (includes
keyboard cable)
Sequential part number listing
37
38
Spare part number
Description
665964-AB1
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Taiwan (includes
keyboard cable)
665964-AD1
Keyboard in luminous rose for use only on HP Mini 210 computer models in South Korea (includes
keyboard cable)
665964-B31
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in the Netherlands
(includes keyboard cable)
665964-BA1
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Slovenia
(includes keyboard cable)
665964-BB1
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Israel (includes
keyboard cable)
665964-BG1
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Switzerland
(includes keyboard cable)
665964-D61
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in India (includes
keyboard cable)
665964-DH1
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Denmark,
Finland, and Norway (includes keyboard cable)
665964-DJ1
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in Greece (includes
keyboard cable)
665964-FL1
Keyboard in luminous rose finish for use only on HP Mini 210 computer models in the Czech
Republic and Slovakia (includes keyboard cable)
665965-001
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in the United States
(includes keyboard cable)
665965-031
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in the United
Kingdom and Singapore (includes keyboard cable)
665965-041
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Germany
(includes keyboard cable)
665965-051
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in France (includes
keyboard cable)
665965-061
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Italy (includes
keyboard cable)
665965-071
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Spain (includes
keyboard cable)
665965-121
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Canada (includes
keyboard cable)
665965-131
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Portugal (includes
keyboard cable)
665965-141
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Turkey (includes
keyboard cable)
665965-161
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Latin America
(includes keyboard cable)
Chapter 3 Illustrated parts catalog
Spare part number
Description
665965-171
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Saudi Arabia
(includes keyboard cable)
665965-211
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Hungary (includes
keyboard cable)
665965-251
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Russia (includes
keyboard cable)
665965-261
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Bulgaria (includes
keyboard cable)
665965-281
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Thailand (includes
keyboard cable)
665965-291
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Japan (includes
keyboard cable)
665965-A41
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Belgium (includes
keyboard cable)
665965-AB1
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Taiwan (includes
keyboard cable)
665965-AD1
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in South Korea
(includes keyboard cable)
665965-B31
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in the Netherlands
(includes keyboard cable)
665965-BA1
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Slovenia (includes
keyboard cable)
665965-BB1
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Israel (includes
keyboard cable)
665965-BG1
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Switzerland
(includes keyboard cable)
665965-D61
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in India (includes
keyboard cable)
665965-DH1
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Denmark, Finland,
and Norway (includes keyboard cable)
665965-DJ1
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in Greece (includes
keyboard cable)
665965-FL1
Keyboard in crimson rose finish for use only on HP Mini 210 computer models in the Czech
Republic and Slovakia (includes keyboard cable)
665966-001
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in the United States
(includes keyboard cable)
665966-031
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in the United
Kingdom and Singapore (includes keyboard cable)
665966-041
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Germany
(includes keyboard cable)
Sequential part number listing
39
40
Spare part number
Description
665966-051
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in France (includes
keyboard cable)
665966-061
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Italy (includes
keyboard cable)
665966-071
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Spain (includes
keyboard cable)
665966-121
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Canada (includes
keyboard cable)
665966-131
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Portugal (includes
keyboard cable)
665966-141
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Turkey (includes
keyboard cable)
665966-161
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Latin America
(includes keyboard cable)
665966-171
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Saudi Arabia
(includes keyboard cable)
665966-211
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Hungary (includes
keyboard cable)
665966-251
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Russia (includes
keyboard cable)
665966-261
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Bulgaria (includes
keyboard cable)
665966-281
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Thailand (includes
keyboard cable)
665966-291
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Japan (includes
keyboard cable)
665966-A41
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Belgium (includes
keyboard cable)
665966-AB1
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Taiwan (includes
keyboard cable)
665966-AD1
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in South Korea
(includes keyboard cable)
665966-B31
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in the Netherlands
(includes keyboard cable)
665966-BA1
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Slovenia (includes
keyboard cable)
665966-BB1
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Israel (includes
keyboard cable)
665966-BG1
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Switzerland
(includes keyboard cable)
Chapter 3 Illustrated parts catalog
Spare part number
Description
665966-D61
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in India (includes
keyboard cable)
665966-DH1
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Denmark,
Finland, and Norway (includes keyboard cable)
665966-DJ1
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in Greece (includes
keyboard cable)
665966-FL1
Keyboard in sweet purple finish for use only on HP Mini 210 computer models in the Czech
Republic and Slovakia (includes keyboard cable)
667750-001
System board for use only with Beats Edition computer models equipped with an Intel Atom N2600
1.60-GHz processor, but not WWAN capability (1.0-MB L2 cache, dual core, 3.5 W; includes
processor and replacement thermal material)
667751-001
System board for use only with Beats Edition computer models equipped with an Intel Atom N2600
1.60-GHz processor and WWAN capability (1.0-MB L2 cache, dual core, 3.5 W; includes
processor and replacement thermal material)
667752-001
System board for use only with Beats Edition computer models equipped with an Intel Atom N2800
1.86-GHz processor, but not WWAN capability (1.0-MB L2 cache, dual core, 6.5 W; includes
processor and replacement thermal material)
667753-001
System board for use only with Beats Edition computer models equipped with an Intel Atom N2800
1.86-GHz processor and WWAN capability (1.0-MB L2 cache, dual core, 6.5 W; includes
processor and replacement thermal material)
668156-001
10.1-in, FlushGlass, HD display assembly in charcoal finish for use only on HP Mini 210
computer models (includes display panel cable, webcamera/microphone module, and WLAN
antenna cables and transceivers)
668157-001
10.1-in, FlushGlass, HD display assembly in ocean drive finish for use only on HP Mini 210
computer models (includes display panel cable, webcamera/microphone module, and WLAN
antenna cables and transceivers)
668158-001
10.1-in, FlushGlass, HD display assembly in luminous rose finish for use only on HP Mini 210
computer models (includes display panel cable, webcamera/microphone module, and WLAN
antenna cables and transceivers)
668159-001
10.1-in, FlushGlass, HD display assembly in crimson red finish for use only on HP Mini 210
computer models (includes display panel cable, webcamera/microphone module, and WLAN
antenna cables and transceivers)
668160-001
10.1-in, FlushGlass, HD display assembly in sweet purple finish for use only on HP Mini 210
computer models (includes display panel cable, webcamera/microphone module, and WLAN
antenna cables and transceivers)
668161-001
10.1-in, WSVGA, HD display assembly in charcoal finish for use only on HP Mini 210
computer models (includes display panel cable, webcamera/microphone module, and WLAN
antenna cables and transceivers)
668162-001
10.1-in, WSVGA, HD display assembly in ocean drive finish for use only on HP Mini 210
computer models (includes display panel cable, webcamera/microphone module, and WLAN
antenna cables and transceivers)
668163-001
10.1-in, WSVGA, HD display assembly in luminous rose finish for use only on HP Mini 210
computer models (includes display panel cable, webcamera/microphone module, and WLAN
antenna cables and transceivers)
Sequential part number listing
41
42
Spare part number
Description
668164-001
10.1-in, WSVGA, HD display assembly in crimson red finish for use only on HP Mini 210
computer models (includes display panel cable, webcamera/microphone module, and WLAN
antenna cables and transceivers)
668165-001
10.1-in, WSVGA, HD display assembly in sweet purple finish for use only on HP Mini 210
computer models (includes display panel cable, webcamera/microphone module, and WLAN
antenna cables and transceivers)
668166-001
10.1-in, BrightView, WSVGA display assembly in black finish for use only on HP Mini 110
computer models with WWAN capability (includes display panel cable, webcamera/microphone
module, WLAN antenna cables and transceivers, and WWAN antenna cables and transceivers)
676909-001
System board for use only with non-Beats Edition computer models equipped with an Intel Atom
N2600 1.60-GHz processor, but not WWAN capability (1.0-MB L2 cache, dual core, 3.5 W;
includes processor and replacement thermal material)
676910-001
System board for use only with non-Beats Edition computer models equipped with an Intel Atom
N2600 1.60-GHz processor and WWAN capability (1.0-MB L2 cache, dual core, 3.5 W;
includes processor and replacement thermal material)
676911-001
System board for use only with non-Beats Edition computer models equipped with an Intel Atom
N2800 1.86-GHz processor, but not WWAN capability (1.0-MB L2 cache, dual core, 6.5 W;
includes processor and replacement thermal material)
676912-001
System board for use only with non-Beats Edition computer models equipped with an Intel Atom
N2800 1.86-GHz processor and WWAN capability (1.0-MB L2 cache, dual core, 6.5 W;
includes processor and replacement thermal material)
Chapter 3 Illustrated parts catalog
4
Removal and replacement
procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use
care when handling the plastic parts. Apply pressure only at the points designated in the
maintenance instructions.
Cables and connectors
CAUTION: When servicing the computer, be sure that cables are placed in their proper locations
during the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat
or seat the cables during removal and insertion. Handle cables by the connector whenever possible. In
all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with
extreme care; these cables tear easily.
Preliminary replacement requirements
43
Drive handling
CAUTION: Drives are fragile components that must be handled with care. To prevent damage to
the computer, damage to a drive, or loss of information, observe these precautions:
Before removing or inserting a hard drive, shut down the computer. If you are unsure whether
the computer is off or in Hibernation, turn the computer on, and then shut it down through the
operating system.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.
Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and
be sure that the optical drive tray is closed.
Handle drives on surfaces covered with at least one inch of shock-proof foam.
Avoid dropping drives from any height onto any surface.
After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.
Avoid exposing an internal hard drive to products that have magnetic fields, such as monitors
or speakers.
Avoid exposing a drive to temperature extremes or liquids.
If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective
packaging and label the package “FRAGILE.”
Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure
determine the degree of sensitivity. Networks built into many integrated circuits provide some
protection, but in many cases, ESD contains enough power to alter device parameters or melt
silicon junctions.
A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.
An electronic device exposed to ESD may not be affected at all and can work perfectly throughout a
normal cycle. Or the device may function normally for a while, then degrade in the internal layers,
reducing its life expectancy.
44
Chapter 4 Removal and replacement procedures
CAUTION: To prevent damage to the computer when you are removing or installing internal
components, observe these precautions:
Keep components in their electrostatic-safe containers until you are ready to install them.
Before touching an electronic component, discharge static electricity by using the guidelines described
in this section.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
If you remove a component, place it in an electrostatic-safe container.
The following table shows how humidity affects the electrostatic voltage levels generated by
different activities.
CAUTION: A product can be degraded by as little as 700 V.
Typical electrostatic voltage levels
Relative humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
Preliminary replacement requirements
45
Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
●
To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
●
Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging.
●
Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
●
Place items on a grounded surface before removing items from their containers.
●
Always be properly grounded when touching a component or assembly.
●
Store reusable ESD-sensitive parts from assemblies in protective packaging or
nonconductive foam.
●
Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that
mechanized equipment used for moving materials is wired to ground and that proper materials
are selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate
electric charges.
Workstation guidelines
Follow these grounding workstation guidelines:
46
●
Cover the workstation with approved static-shielding material.
●
Use a wrist strap connected to a properly grounded work surface and use properly grounded tools
and equipment.
●
Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
●
When fixtures must directly contact dissipative surfaces, use fixtures made only of staticsafe materials.
●
Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids
and Styrofoam.
●
Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle
these items only at static-free workstations.
●
Avoid contact with pins, leads, or circuitry.
●
Turn off power and input signals before inserting or removing connectors or test equipment.
Chapter 4 Removal and replacement procedures
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
●
When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps
with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground,
wear a strap snugly against the skin at all times. On grounded mats with banana-plug connectors,
use alligator clips to connect a wrist strap.
●
When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps)
can be used at standing workstations and are compatible with most types of shoes or boots. On
conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one
megohm resistance between the operator and ground. To be effective, the conductive must be
worn in contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
●
Antistatic tape
●
Antistatic smocks, aprons, and sleeve protectors
●
Conductive bins and other assembly or soldering aids
●
Nonconductive foam
●
Conductive tabletop workstations with ground cords of one megohm resistance
●
Static-dissipative tables or floor mats with hard ties to the ground
●
Field service kits
●
Static awareness labels
●
Material-handling packages
●
Nonconductive plastic bags, tubes, or boxes
●
Metal tote boxes
●
Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
Material
Use
Voltage protection level
Antistatic plastics
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
Preliminary replacement requirements
47
Component replacement procedures
This chapter provides removal and replacement procedures.
There are as many as 41 screws that must be removed, replaced, or loosened when servicing
the computer. Make special note of each screw size and location during removal and replacement.
Service tag
When ordering parts or requesting information, provide the computer serial number and model number
provided on the service tag. It is necessary to remove the battery to obtain these numbers. See Battery
on page 50 for battery removal instructions.
48
Item
Component
Description
(1)
Product name
This is the product name affixed to the front of
the computer.
(2)
Serial number (s/n)
This is an alphanumeric identifier that is unique to
each product.
(3)
Part number/Product number (p/n)
This number provides specific information about the
product’s hardware components. The part number helps
a service technician determine what components and
parts are needed.
Chapter 4 Removal and replacement procedures
Item
Component
Description
(4)
Warranty period
This number describes the duration of the warranty
period for the computer.
(5)
Model description
This is the alphanumeric identifier used to locate
documents, drivers, and support for the computer.
Computer feet
The computer feet are adhesive-backed rubber pads. There are 2 rubber feet that attach to the corner
covers in the locations illustrated below. These rubber feet are available in the Rubber Kit, spare part
number 650734-001.
Component replacement procedures
49
Battery
Description
Spare part number
6-cell, 55-Wh, 2.55-Ah, Li-ion battery
646757-001
3-cell, 28-Wh, 2.55-Ah, Li-ion battery
646755-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the battery:
1.
Slide the battery/service cover release latch (1) to release the battery.
2.
Pivot the front edge of the battery (2) up and back.
3.
Remove the battery (3) from the computer.
To insert the battery:
50
1.
Align the tabs on the rear edge of the battery with the notches on the rear edge of the battery bay.
2.
Pivot the front edge of the battery down into the battery bay until it is seated. (The battery release
latch will automatically lock into place.)
Chapter 4 Removal and replacement procedures
SIM (select models only)
NOTE: The SIM is provided by the end-user as a security measure for the WWAN module. The SIM
should be removed, placed into a static-dissipative container, and then replaced when the computer
is reassembled.
Before removing the SIM, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 50).
Remove the SIM:
1.
Press in on the SIM (1) to release it from the SIM slot.
2.
Remove the SIM (2) from the SIM slot.
Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
Component replacement procedures
51
WLAN module
Description
Spare part number
Atheros 9485GN 802.11b/g/n 1×1 WiFi and 3012 Bluetooth 4.0 Combo Adapter
655795-001
Broadcom 4313GN 802.11b/g/n 1×1 WiFi and 20702 Bluetooth 4.0 Combo Adapter
657325-001
Intel Centrino Advanced-N 6230 WLAN module
631956-001
Ralink 5390GN 802.11b/g/n 1×1 WiFi Adapter
630703-001
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless
module authorized for use in the computer by the governmental agency that regulates wireless devices
in your country or region. If you replace the module and then receive a warning message, remove the
module to restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 50).
Remove the WLAN module:
1.
Slide the battery/service cover latch (1) to release the service cover.
2.
Slide the service cover (2) toward the front of the computer, and then remove the
service cover (3).
NOTE: It is normal for the service cover to flex slightly when it is released. You may also hear
some popping noises as the service cover tabs disengage from the base enclosure slots.
52
Chapter 4 Removal and replacement procedures
The service cover is available using the following spare part numbers:
3.
●
663676-001—In black finish for use only on Compaq Mini CQ10 and HP Mini 110
computer models
●
650727-001—In charcoal finish for use only on HP Mini 210 computer models
●
650732-001—In crimson red finish for use only on HP Mini 210 computer models
●
650731-001—In luminous rose for use only on HP Mini 210 computer models
●
650728-001—In ocean drive for use only on HP Mini 210 computer models
●
654203-001—In sweet purple finish for use only on HP Mini 210 computer models
Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE: The #1 WLAN antenna cable is connected to the WLAN module “Main” terminal.
The #2 WLAN antenna cable is connected to the WLAN module “Aux” terminal.
4.
Remove the Phillips PM2.0×3.0 screw (2) that secures the WLAN module to the system board.
(The WLAN module tilts up.)
Component replacement procedures
53
5.
Remove the WLAN module by pulling the module away from the slot at an angle (3).
NOTE: The WLAN module is designed with a notch (4) to prevent incorrect installation into the
WLAN module socket.
NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective
sleeves must be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
54
Chapter 4 Removal and replacement procedures
WWAN module
Description
Spare part number
HP hs2340 HSPA+ Mobile Broadband Module
632155-001
HP lc2000 HSPA Mobile Broadband Module
612599-001
HP lc2010 HSPA Mobile Broadband Module
612600-001
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless
module authorized for use in the computer by the governmental agency that regulates wireless devices
in your country or region. If you replace the module and then receive a warning message, remove the
module to restore device functionality, and then contact technical support.
Before removing the WWAN module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 50).
5.
Remove the service cover (see WLAN module on page 52).
Remove the WWAN module:
1.
Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module.
NOTE: The #1 WWAN antenna cable is connected to the WWAN module “Main” terminal.
The #2 WWAN antenna cable is connected to the WWAN module “Aux” terminal.
2.
Remove the Phillips PM2.0×3.0 screw (2) that secures the WWAN module to the system board.
(The WWAN module tilts up.)
Component replacement procedures
55
3.
Remove the WWAN module by pulling the module away from the slot at an angle (3).
NOTE: The WWAN module is designed with a notch (4) to prevent incorrect installation into
the WWAN module socket.
NOTE: If the WWAN antennas are not connected to the terminals on the WWAN module, the
protective sleeves must be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WWAN module.
56
Chapter 4 Removal and replacement procedures
Memory module
Description
Spare part number
2-GB (PC3, 10600, 1333-MHz)
621565-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 50).
5.
Remove the service cover (see WLAN module on page 52).
Remove the memory module:
1.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The memory module tilts up.)
2.
Remove the memory module (2) by pulling it away from the slot at an angle.
Reverse this procedure to install the memory module.
Component replacement procedures
57
RTC battery
Description
Spare part number
RTC battery
621565-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 50).
5.
Remove the service cover (see WLAN module on page 52).
Remove the RTC battery:
1.
Insert a non-conductive, flat-tip, tool (1) into the notch (2) on the side of the RTC battery socket.
2.
Remove the RTC battery (3) from the socket on the system board.
Reverse this procedure to install the RTC battery. When installing the RTC battery, be sure the “+” sign
faces up.
58
Chapter 4 Removal and replacement procedures
Hard drive
NOTE: The hard drive spare part kit does not include the hard drive bracket, connector cable, rubber
isolators, or screws. These components are included in the Hard Drive Hardware Kit, spare part
number 664913-001.
Description
Spare part number
500-GB, 5400-rpm
634932-001
320-GB, 5400-rpm
645193-001
250-GB, 5400-rpm
645191-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 50).
5.
Remove the service cover (see WLAN module on page 52).
Remove the hard drive:
1.
Disconnect the hard drive connector cable (1) from the system board.
2.
Remove the Phillips PM 2.0×5.0 screw (2) that secures the hard drive to the computer.
3.
Use the pull tab (3) to lift the left side of the hard drive until it rests at an angle.
Component replacement procedures
59
4.
Remove the hard drive (4) by sliding it up and to the left at an angle.
5.
If it is necessary to replace the hard drive connector cable (1), the hard drive screws (2), the hard
drive bracket (3), or the rubber isolators (4), remove and replace the components.
Reverse this procedure to reassemble and install the hard drive.
60
Chapter 4 Removal and replacement procedures
Keyboard
NOTE: The keyboard spare part kit includes a keyboard cable.
Description
Spare part number
Description
Spare part number
Keyboard in black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models:
For use in Belgium
658517-A41
For use in the Netherlands
658517-B31
For use in Bulgaria
658517-261
For use in Portugal
658517-131
For use in Canada
658517-121
For use in Russia
658517-251
For use in the Czech Republic
and Slovakia
658517-FL1
For use in Saudi Arabia
658517-171
For use in Denmark, Finland,
and Norway
658517-DH1
For use in Slovenia
658517-BA1
For use in France
658517-051
For use in South Korea
658517-AD1
For use in Germany
658517-041
For use in Spain
658517-071
For use in Greece
658517-DJ1
For use in Switzerland
658517-BG1
For use in Hungary
658517-211
For use in Taiwan
658517-AB1
For use in Israel
658517-BB1
For use in Thailand
658517-281
For use in Italy
658517-061
For use in Turkey
658517-141
For use in Japan
658517-291
For use in the United Kingdom
and Singapore
658517-031
For use in Latin America
658517-161
For use in the United States
658517-001
Keyboard in charcoal finish for use only on HP Mini 210
computer models:
For use in Latin America
665962-161
For use in Belgium
665962-A41
For use in the Netherlands
665962-B31
For use in Bulgaria
665962-261
For use in Portugal
665962-131
For use in Canada
665962-121
For use in Russia
665962-251
For use in the Czech Republic
and Slovakia
665962-FL1
For use in Saudi Arabia
665962-171
For use in Denmark, Finland,
and Norway
665962-DH1
For use in Slovenia
665962-BA1
For use in France
665962-051
For use in South Korea
665962-AD1
For use in Germany
665962-041
For use in Spain
665962-071
For use in Greece
665962-DJ1
For use in Switzerland
665962-BG1
For use in Hungary
665962-211
For use in Taiwan
665962-AB1
For use in India
665962-D61
For use in Thailand
665962-281
For use in Israel
665962-BB1
For use in Turkey
665962-141
Component replacement procedures
61
62
Description
Spare part number
Description
Spare part number
For use in Italy
665962-061
For use in the United Kingdom
and Singapore
665962-031
For use in Japan
665962-291
For use in the United States
665962-001
Keyboard in crimson red finish for use only on HP Mini 210
computer models:
For use in Latin America
665965-161
For use in Belgium
665965-A41
For use in the Netherlands
665965-B31
For use in Bulgaria
665965-261
For use in Portugal
665965-131
For use in Canada
665965-121
For use in Russia
665965-251
For use in the Czech Republic
and Slovakia
665965-FL1
For use in Saudi Arabia
665965-171
For use in Denmark, Finland,
and Norway
665965-DH1
For use in Slovenia
665965-BA1
For use in France
665965-051
For use in South Korea
665965-AD1
For use in Germany
665965-041
For use in Spain
665965-071
For use in Greece
665965-DJ1
For use in Switzerland
665965-BG1
For use in Hungary
665965-211
For use in Taiwan
665965-AB1
For use in India
665965-D61
For use in Thailand
665965-281
For use in Israel
665965-BB1
For use in Turkey
665965-141
For use in Italy
665965-061
For use in the United Kingdom
and Singapore
665965-031
For use in Japan
665965-291
For use in the United States
665965-001
Keyboard in luminous rose finish for use only on HP Mini 210
computer models:
For use in Latin America
665964-161
For use in Belgium
665964-A41
For use in the Netherlands
665964-B31
For use in Bulgaria
665964-261
For use in Portugal
665964-131
For use in Canada
665964-121
For use in Russia
665964-251
For use in the Czech Republic
and Slovakia
665964-FL1
For use in Saudi Arabia
665964-171
For use in Denmark, Finland,
and Norway
665964-DH1
For use in Slovenia
665964-BA1
For use in France
665964-051
For use in South Korea
665964-AD1
For use in Germany
665964-041
For use in Spain
665964-071
For use in Greece
665964-DJ1
For use in Switzerland
665964-BG1
For use in Hungary
665964-211
For use in Taiwan
665964-AB1
For use in India
665964-D61
For use in Thailand
665964-281
For use in Israel
665964-BB1
For use in Turkey
665964-141
Chapter 4 Removal and replacement procedures
Description
Spare part number
Description
Spare part number
For use in Italy
665964-061
For use in the United Kingdom
and Singapore
665964-031
For use in Japan
665964-291
For use in the United States
665964-001
Keyboard in ocean drive finish for use only on HP Mini 210
computer models:
For use in Latin America
665963-291
For use in Belgium
665963-A41
For use in the Netherlands
665963-161
For use in Bulgaria
665963-261
For use in Portugal
665963-B31
For use in Canada
665963-121
For use in Russia
665963-131
For use in the Czech Republic
and Slovakia
665963-FL1
For use in Saudi Arabia
665963-251
For use in Denmark, Finland,
and Norway
665963-DH1
For use in Slovenia
665963-171
For use in France
665963-051
For use in South Korea
665963-BA1
For use in Germany
665963-041
For use in Spain
665963-AD1
For use in Greece
665963-DJ1
For use in Switzerland
665963-071
For use in Hungary
665963-211
For use in Taiwan
665963-BG1
For use in India
665963-D61
For use in Thailand
665963-AB1
For use in Israel
665963-BB1
For use in Turkey
665963-281
For use in Italy
665963-061
For use in the United Kingdom
and Singapore
665963-141
For use in Japan
665963-291
For use in the United States
665963-031
Keyboard in sweet purple finish for use only on HP Mini 210
computer models:
For use in Latin America
665966-161
For use in Belgium
665966-A41
For use in the Netherlands
665966-B31
For use in Bulgaria
665966-261
For use in Portugal
665966-131
For use in Canada
665966-121
For use in Russia
665966-251
For use in the Czech Republic
and Slovakia
665966-FL1
For use in Saudi Arabia
665966-171
For use in Denmark, Finland,
and Norway
665966-DH1
For use in Slovenia
665966-BA1
For use in France
665966-051
For use in South Korea
665966-AD1
For use in Germany
665966-041
For use in Spain
665966-071
For use in Greece
665966-DJ1
For use in Switzerland
665966-BG1
For use in Hungary
665966-211
For use in Taiwan
665966-AB1
For use in India
665966-D61
For use in Thailand
665966-281
For use in Israel
665966-BB1
For use in Turkey
665966-141
Component replacement procedures
63
Description
Spare part number
Description
Spare part number
For use in Italy
665966-061
For use in the United Kingdom
and Singapore
665966-031
For use in Japan
665966-291
For use in the United States
665966-001
Before removing the keyboard, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 50).
5.
Remove the service cover (see WLAN module on page 52).
Remove the keyboard:
64
1.
Remove the two Phillips PM2.0×5.0 screws that secure the keyboard to the computer.
2.
Rest and secure the computer on its left side.
3.
Partially open the computer.
Chapter 4 Removal and replacement procedures
4.
Insert a screw driver or similar thin tool into the keyboard release area, and then press on the
back of the keyboard until the keyboard disengages from the computer.
5.
Turn the computer right-side up with the front toward you.
6.
Open the computer as far as it will open.
Component replacement procedures
65
7.
Lift the rear edge of the keyboard (1), and then swing the keyboard (2) up and forward until it
rests upside down on the palm rest.
8.
Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and
then disconnect the keyboard cable (2) from the system board.
9.
Remove the keyboard (3).
Reverse this procedure to install the keyboard.
66
Chapter 4 Removal and replacement procedures
Top cover
NOTE: The top cover spare part kit includes the TouchPad and TouchPad cable.
Description
Spare part number
In black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models
663677-001
In charcoal finish for use only on HP Mini 210 computer models
650747-001
In crimson red finish for use only on HP Mini 210 computer models
650752-001
In luminous rose finish for use only on HP Mini 210 computer models
650751-001
In ocean drive finish for use only on HP Mini 210 computer models
650748-001
In Pacific blue finish for use only on HP Mini 110 computer models
658515-001
In Sonora red finish for use only on HP Mini 110 computer models
658513-001
In sweet purple finish for use only on HP Mini 210 computer models
654204-001
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 50).
5.
Remove the service cover (see WLAN module on page 52).
6.
Remove the keyboard (see Keyboard on page 61).
NOTE: When replacing the top cover, be sure to remove the speakers from the defective top cover
and install them on the replacement top cover. See Speakers on page 73 for speaker removal and
replacement instructions.
Remove the top cover:
1.
Close the computer.
2.
Turn the computer upside down, with the front toward you.
Component replacement procedures
67
3.
Release the ZIF connector (1) to which the TouchPad cable is connected, and then disconnect the
TouchPad cable (2) from the system board.
NOTE: Additional slight force may be needed when releasing the TouchPad cable from the
top cover. Double-sided adhesive is used to attach the TouchPad cable to the top cover surface.
4.
68
Remove the two rubber feet (1) on the rear corners of the base enclosure. (The rubber feet are
available in the Rubber Kit, spare part number 650734-001.)
Chapter 4 Removal and replacement procedures
5.
Remove the seven Phillips PM2.0×5.0 screws (2) that secure the top cover and the corner covers
to the base enclosure.
NOTE: The rubber feet are notched differently. The rubber foot (1) that fits on the left side has a
rectangular alignment notch. The rubber foot (2) that fits on the right side has an “L”-shaped
alignment notch. When installing the rubber feet, align them according to the side of the computer
on which they should be installed.
Component replacement procedures
69
70
6.
Remove the corner covers.
7.
Release the wireless antenna cables from the clips (1) and routing channel built into the
base enclosure.
8.
Disconnect the display panel cable (2) from the system board.
Chapter 4 Removal and replacement procedures
9.
Remove the two Phillips PM2.0×5.0 screws that secure the top cover to the base enclosure.
10. Turn the computer right side up, with the front toward you.
11. Open the computer as far as it will open.
12. Release the ZIF connector (1) to which the power button board cable is connected, and then
disconnect the power button board cable (2) from the system board.
13. Disconnect the speaker cable (3) from the system board.
Component replacement procedures
71
14. Remove the five Phillips PM2.0×5.0 screws that secure the top cover to the base enclosure.
15. Lift the front edge of the top cover (1) until the left and right sides disengage from the
base enclosure.
16. Remove the top cover (2).
Reverse this procedure to install the top cover.
72
Chapter 4 Removal and replacement procedures
Speakers
Description
Spare part number
Speakers (include cable)
650736-001
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 50), and then remove the following components:
●
Service cover (see WLAN module on page 52)
●
Keyboard (see Keyboard on page 61)
●
Top cover (see Top cover on page 67)
Remove the speakers:
1.
Release the speaker cable from the clip (1) built into the top cover.
2.
Remove the speakers (2) from the top cover.
Reverse this procedure to install the speakers.
Component replacement procedures
73
System board
NOTE: The system board spare part kit includes replacement thermal material.
Description
Spare part number
For use only with Beats Edition computer models equipped with an Intel Atom N2800 1.86-GHz
processor and WWAN capability (1.0-MB L2 cache, dual core, 6.5 W)
667753-001
For use only with non-Beats Edition computer models equipped with an Intel Atom N2800 1.86GHz processor and WWAN capability (1.0-MB L2 cache, dual core, 6.5 W)
676912-001
For use only with Beats Edition computer models equipped with an Intel Atom N2800 1.86-GHz
processor, but not WWAN capability (1.0-MB L2 cache, dual core, 6.5 W)
667752-001
For use only with non-Beats Edition computer models equipped with an Intel Atom N2800 1.86GHz processor, but not WWAN capability (1.0-MB L2 cache, dual core, 6.5 W)
676911-001
For use only with Beats Edition computer models equipped with an Intel Atom N2600 1.60-GHz
processor and WWAN capability (1.0-MB L2 cache, dual core, 3.5 W)
667751-001
For use only with non-Beats Edition computer models equipped with an Intel Atom N2600 1.60GHz processor and WWAN capability (1.0-MB L2 cache, dual core, 3.5 W)
676910-001
For use only with Beats Edition computer models equipped with an Intel Atom N2600 1.60-GHz
processor, but not WWAN capability (1.0-MB L2 cache, dual core, 3.5 W)
667750-001
For use only with non-Beats Edition computer models equipped with an Intel Atom N2600 1.60GHz processor, but not WWAN capability (1.0-MB L2 cache, dual core, 3.5 W)
676909-001
Before removing the system board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 50), and then remove the following components:
●
Service cover (see WLAN module on page 52)
●
Hard drive (see Hard drive on page 59)
●
Keyboard (see Keyboard on page 61)
●
Top cover (see Top cover on page 67)
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
74
●
SIM (see SIM (select models only) on page 51)
●
WLAN module (see WLAN module on page 52)
Chapter 4 Removal and replacement procedures
●
WWAN module (see WWAN module on page 55)
●
RTC battery (see RTC battery on page 58)
●
Memory module (see Memory module on page 57)
●
Power connector cable (see System board on page 74)
●
Fan (see Fan on page 77)
●
Heat sink (see Heat sink on page 79)
Remove the system board:
1.
Remove the two Phillips PM2.0×5.7 screws that secure the system board to the base enclosure.
2.
Release the power connector (1) from the clip built into the base enclosure.
3.
Flex the right side of the base enclosure (2) until the jacks and ports on the right side of the
system board are clear of the openings in the base enclosure.
4.
Lift the right side of the system board (3) until it rests at an angle.
Component replacement procedures
75
5.
Remove the system board (4) by sliding it up and to the right at an angle.
NOTE: If it is necessary to replace the power connector cable, turn the system board upside
down with the rear toward you, and then disconnect the power connector cable from the
system board. The power connector cable is available using spare part number 656095-001.
Reverse this procedure to install the system board and the power connector cable.
76
Chapter 4 Removal and replacement procedures
Fan
Description
Spare part number
Fan
651897-001
NOTE: To properly ventilate the computer, allow at least 7.6 cm (3 in) of clearance on the left side of
the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature
sensor and is designed to turn on automatically when high temperature conditions exist. These
conditions are affected by high external temperatures, system power consumption, power
management/battery conservation configurations, battery fast charging, and software requirements.
Exhaust air is displaced through the ventilation grill located on the left side of the computer.
Before removing the fan, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 50), and then remove the following components:
●
Service cover (see WLAN module on page 52)
●
Keyboard (see Keyboard on page 61)
●
Top cover (see Top cover on page 67)
●
System board (see System board on page 74)
Remove the fan:
1.
Turn the system board upside down, with the rear toward you.
2.
Disconnect the fan cable (1) from the system board.
3.
Remove the Phillips PM2.0×4.6 screw (2) that secures the fan to the system board.
4.
Disengage the tab (3) on the fan from the slot on the system board.
Component replacement procedures
77
5.
78
Remove the fan (4).
Chapter 4 Removal and replacement procedures
Heat sink
Description
Spare part number
Heat sink (includes replacement thermal material)
651898-001
Before removing the heat sink, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 50), and then remove the following components:
●
Service cover (see WLAN module on page 52)
●
Keyboard (see Keyboard on page 61)
●
Top cover (see Top cover on page 67)
●
System board (see System board on page 74)
●
Fan (see Fan on page 77)
Remove the heat sink:
1.
Remove the two Phillips PM2.0×4.6 screws (1) that secure the heat sink to the system board.
Component replacement procedures
79
2.
Remove the heat sink (2).
NOTE: Due to the adhesive quality of the thermal material located between the heat sink and
system board components, it may be necessary to move the heat sink from side to side to
detach it.
The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the
system board components each time the heat sink is removed. Replacement thermal material is included
with the heat sink and system board spare part kits.
NOTE: The following illustration shows the replacement thermal material locations. Thermal paste is
used on the processor (1) and the heat sink section (2) that services it.
Reverse this procedure to install the heat sink.
80
Chapter 4 Removal and replacement procedures
Display assembly
Description
Spare part number
Display assembly 10.1-in (includes display panel cable, 2 WLAN antenna transceivers and cables, and webcamera/
microphone module and cable)
BrightView, WSVGA display assembly for use only on Compaq Mini CQ10 computer models
664894-001
BrightView, WSVGA display assembly in black finish for use only on HP Mini 110
computer models equipped with WWAN capability (includes WWAN antenna cables
and transceivers)
668166-001
BrightView, WSVGA display assembly in black finish for use only on HP Mini 110
computer models
658507-001
BrightView, WSVGA display assembly in Pacific blue finish for use only on HP Mini 110
computer models
658510-001
BrightView, WSVGA display assembly in Sonora red finish for use only on HP Mini 110
computer models
658508-001
FlushGlass, HD display assembly in charcoal finish for use only on HP Mini 210 computer models
equipped with WWAN capability (includes WWAN antenna cables and transceivers)
650712-001
FlushGlass, HD display assembly in charcoal finish for use only on HP Mini 210 computer models
668156-001
FlushGlass, HD display assembly in crimson red finish for use only on HP Mini 210
computer models
668159-001
FlushGlass, HD display assembly in luminous rose finish for use only on HP Mini 210
computer models
668158-001
FlushGlass, HD display assembly in ocean drive finish for use only on HP Mini 210
computer models
668157-001
FlushGlass, HD display assembly in sweet purple finish for use only on HP Mini 210
computer models
668160-001
WSVGA, HD display assembly in charcoal finish for use only on HP Mini 210 computer models
equipped with WWAN capability (includes WWAN antenna cables and transceivers)
650719-001
WSVGA, HD display assembly in charcoal finish for use only on HP Mini 210 computer models
668161-001
WSVGA, HD display assembly in crimson red finish for use only on HP Mini 210
computer models
668164-001
WSVGA, HD display assembly in luminous rose finish for use only on HP Mini 210
computer models
668163-001
WSVGA, HD display assembly in sweet purple finish for use only on HP Mini 210
computer models
668165-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
Component replacement procedures
81
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 50), and then remove the following components:
●
Service cover (see WLAN module on page 52)
●
Keyboard (see Keyboard on page 61)
●
Top cover (see Top cover on page 67)
Remove the display assembly:
1.
Position the computer upside down, with the front toward you.
CAUTION: Support the open display assembly when removing the following screws. Failure to
support the display assembly can result in damage to the display assembly and other computer
components.
2.
Remove the two Phillips PM2.0×5.7 screws (1) that secure the display assembly to the computer.
3.
Remove the display assembly (2).
NOTE: Steps 4 through 9 apply only to Compaq Mini CQ10 and HP Mini 110 computer
models.
4.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
82
Flex the inside edges of the top edge (1), the left and right sides (2), and the
bottom edge (3) of the display bezel until the bezel disengages from the display enclosure.
Chapter 4 Removal and replacement procedures
b.
5.
Remove the display bezel (4). The display bezel is available using the following spare
part numbers:
●
658504-001 — For use only on Compaq Mini CQ10 computer models
●
658503-001 — For use only on HP Mini 110 computer models
If it is necessary to replace the webcamera/microphone module:
a.
Detach and release the module (1) as far as the module cable allows. (The module is
attached to the display enclosure with double-sided tape.)
b.
Disconnect the module cable (2) from the module.
c.
Remove the webcamera/microphone module. The webcamera/microphone module is
available using spare part number 658516-001.
Component replacement procedures
83
6.
7.
84
If it is necessary to replace the display panel:
a.
Remove the six Phillips PM2.0×4.6 screws (1) that secure the display panel to the
display enclosure.
b.
Lift the top edge of the display panel (2) and swing it up and forward until it rests at
an angle.
c.
Remove the display panel. The display panel is available using spare part number
658511-001.
If it is necessary to replace the display hinges:
a.
Remove the four Phillips PM2.0×3.7 screws (1) that secure the display hinges to the
display panel.
b.
Remove the display hinges (2). The display hinges include the display hinges and brackets
and are available using spare part number 650711-001.
Chapter 4 Removal and replacement procedures
8.
If it is necessary to replace the display panel cable:
CAUTION: Make sure the work surface is free of any foreign objects before turning the display
panel upside down. Failure to clear the work surface can result in scratches and damage to the
display panel surface.
9.
a.
Turn the display panel upside down with the bottom edge toward you.
b.
Release the tabs (1) built into the shielding on the back of the display panel that conceal the
display panel connector and secure the display panel cable.
c.
Release the adhesive strip (2) that secures the display panel cable to the display panel, and
then disconnect the display panel cable (3) from the display panel.
d.
Remove the display panel cable. The display panel cable includes the webcamera/
microphone module cable and is available in the Display Cable Kit, spare part number
658505-001.
If it is necessary to replace the wireless antenna cables and transceivers:
a.
Release the WLAN antenna transceivers (1) and the WWAN antenna transceivers (2) from
the display enclosure. (The antenna transceivers are attached to the display enclosure with
double-sided tape.)
Component replacement procedures
85
b.
Release the wireless antenna cables from the clips (3) built into the display enclosure.
c.
Remove the wireless antenna cables and transceivers. The wireless antenna cables
and transceivers are available in the Antenna Kit, spare part number 658498-001.
Reverse this procedure to reassemble and install the display assembly.
86
Chapter 4 Removal and replacement procedures
5
Setup Utility (BIOS) and System
Diagnostics
Using Setup Utility
Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and
output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility
includes settings for the types of peripherals installed, the startup sequence of the computer, and the
amount of system and extended memory.
NOTE: Use extreme care when making changes in Setup Utility. Errors can prevent the computer from
operating properly.
Starting Setup Utility
NOTE: An external keyboard or mouse connected to a USB port can be used with Setup Utility only if
USB legacy support is enabled.
To start Setup Utility, follow these steps:
1.
Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
2.
Press f10 to enter Setup Utility.
Changing the language of Setup Utility
1.
Start Setup Utility.
2.
Use the arrow keys to select System Configuration > Language, and then press enter.
3.
Use the arrow keys to select a language, and then press enter.
4.
When a confirmation prompt with your language selected is displayed, press enter.
5.
To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press enter.
Your change takes effect immediately.
Using Setup Utility
87
Navigating and selecting in Setup Utility
To navigate and select in Setup Utility, follow these steps:
1.
2.
Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
●
To select a menu or a menu item, use the tab key and the keyboard arrow keys and then
press enter, or use a pointing device to click the item.
●
To scroll up and down, click the up arrow or the down arrow in the upper-right corner of the
screen, or use the up arrow key or the down arrow key.
●
To close open dialog boxes and return to the main Setup Utility screen, press esc, and then
follow the on-screen instructions.
Press f10 to enter Setup Utility.
To exit Setup Utility menus, choose one of the following methods:
●
To exit Setup Utility menus without saving your changes, press the esc key, and then follow the onscreen instructions.
– or –
Use the arrow keys to select Exit > Exit Discarding Changes, and then press enter.
●
To save your changes and exit Setup Utility menus, press f10, and then follow the onscreen instructions.
– or –
Use the tab key and the arrow keys to select Exit > Exit Saving Changes, and then
press enter.
Your changes go into effect when the computer restarts.
Displaying system information
88
1.
Start Setup Utility.
2.
Select the Main menu. System information such as the system time and date, and identification
information about the computer is displayed.
3.
To exit Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press enter.
Chapter 5 Setup Utility (BIOS) and System Diagnostics
Restoring factory settings in Setup Utility
NOTE: Restoring defaults will not change the hard drive mode.
To return all settings in Setup Utility to the values that were set at the factory, follow these steps:
1.
Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
2.
Press f10 to enter Setup Utility.
3.
Use the arrow keys to select Exit > Load Setup Defaults.
4.
Follow the on-screen instructions.
5.
To save your changes and exit, press f10, and then follow the on-screen instructions.
– or –
Use the arrow keys to select Exit > Exit Saving Changes, and then press enter.
Your changes go into effect when the computer restarts.
NOTE: Your password settings and security settings are not changed when you restore the
factory settings.
Exiting Setup Utility
●
To exit Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the
arrow keys to select Exit > Exit Saving Changes, and then press enter.
●
To exit Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the
arrow keys to select Exit > Exit Discarding Changes, and then press enter.
Updating the BIOS
Updated versions of the BIOS may be available on the HP Web site.
Most BIOS updates on the HP Web site are packaged in compressed files called SoftPaqs.
Some download packages contain a file named Readme.txt, which contains information regarding
installing and troubleshooting the file.
Using Setup Utility
89
Determining the BIOS version
To determine whether available BIOS updates contain later BIOS versions than those currently installed
on the computer, you need to know the version of the system BIOS currently installed.
BIOS version information (also known as ROM date and System BIOS) can be displayed by pressing fn
+esc (if you are already in Windows) or by using Setup Utility.
1.
Start Setup Utility (BIOS).
2.
Use the arrow keys to select Main.
3.
To exit Setup Utility (BIOS) without saving your changes, use the tab key and the arrow keys to
select Exit > Exit Discarding Changes, and then press enter.
Downloading a BIOS update
CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download
and install a BIOS update only when the computer is connected to reliable external power using the AC
adapter. Do not download or install a BIOS update while the computer is running on battery power,
docked in an optional docking device, or connected to an optional power source. During the
download and installation, follow these instructions:
Do not disconnect power from the computer by unplugging the power cord from the AC outlet.
Do not shut down the computer or initiate Sleep or Hibernation.
Do not insert, remove, connect, or disconnect any device, cable, or cord.
1.
Windows 7—Select Start > Help and Support > Maintain.
Windows XP—Select Start > Help and Support, and then select the software and
drivers update.
2.
Follow the on-screen instructions to identify your computer and access the BIOS update you want
to download.
3.
At the download area, follow these steps:
a.
Identify the BIOS update that is later than the BIOS version currently installed on your
computer. Make a note of the date, name, or other identifier. You may need this information
to locate the update later, after it has been downloaded to your hard drive.
b.
Follow the on-screen instructions to download your selection to the hard drive. Make a note
of the path to the location on your hard drive where the BIOS update is downloaded. You
will need to access this path when you are ready to install the update.
NOTE: If you connect your computer to a network, consult the network administrator before
installing any software updates, especially system BIOS updates.
90
Chapter 5 Setup Utility (BIOS) and System Diagnostics
BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the
download is complete. If no instructions are displayed, follow these steps:
1.
Windows 7—Open Windows Explorer by selecting Start > Computer.
Windows XP—Open Windows Explorer by selecting Start > My Computer.
2.
Double-click your hard drive designation. The hard drive designation is typically Local Disk (C:).
3.
Using the hard drive path you recorded earlier, open the folder on your hard drive that contains
the update.
4.
Double-click the file that has an .exe extension (for example, filename.exe). The BIOS
installation begins.
5.
Complete the installation by following the on-screen instructions.
NOTE: After a message on the screen reports a successful installation, you can delete the
downloaded file from your hard drive.
Using System Diagnostics
System Diagnostics allows you to run diagnostic tests to determine if the computer hardware is
functioning properly. The following diagnostic tests are available in System Diagnostics:
●
Start-up test—This test analyzes the main computer components that are required to start
the computer.
●
Run-in test—This test repeats the start-up test and checks for intermittent problems that the start-up
test does not detect.
●
Hard disk test—This test analyzes the physical condition of the hard drive, and then checks all
data in every sector of the hard drive. If the test detects a damaged sector, it attempts to move the
data to a good sector.
●
Memory test—This test analyzes the physical condition of the memory modules. If it reports an
error, replace the memory modules immediately.
●
Battery test—This test analyzes the condition of the battery. If the battery fails the test, contact HP
support to report the issue and purchase a replacement battery.
You can also view system information and error logs in the System Diagnostics window.
To start System Diagnostics:
1.
Turn on or restart the computer. While the “Press the ESC key for Startup Menu” message is
displayed in the lower-left corner of the screen, press esc. When the Startup Menu is displayed,
press f2.
2.
Click the diagnostic test you want to run, and then follow the on-screen instructions.
NOTE: If you need to stop a diagnostics test while it is running, press esc.
Using System Diagnostics
91
6
Specifications
Computer specifications
Metric
U.S.
Width
26.8 cm
10.55 in
Depth
19.1 cm
7.52 in
Height (front to back)
2.3 to 3.3 cm
0.91 to 1.29 in
Weight
1.26 kg (with 3-cell battery),
1.40 kg (with 6-cell battery)
2.77 lb (with 3-cell battery),
3.09 lb (with 6-cell battery)
Dimensions
Input power
Operating voltage and current
19.5 V dc @ 2.05 A - 40W
Temperature
Operating
5°C to 35°C
41°F to 95°F
Nonoperating
-20°C to 60°C
-4°F to 140°F
Relative humidity (noncondensing)
Operating
10% to 90%
Nonoperating
5% to 95%
Maximum altitude (unpressurized)
Operating
-15 m to 3,048 m
-50 ft to 10,000 ft
Nonoperating
-15 m to 12,192 m
-50 ft to 40,000 ft
NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The device operates well within this
range of temperatures.
92
Chapter 6 Specifications
10.1-inch WSVGA display specifications
Metric
U.S.
Height
23.5 cm
9.3 in
Width
14.3 cm
5.6 in
Diagonal
25.7 cm
10.1 in
Number of colors
262,144
Contrast ratio
500:1 (typical)
Brightness
200 nits (typical)
Dimensions
Pixel resolution
Pitch
0.2175 × 0.2088 mm
Format
1024 × 600
Configuration
RGB vertical stripe
Backlight
LED
Character display
80 × 25
Total power consumption
3.46 W
Viewing angle
±45° horizontal, +15/–35° vertical (typical)
10.1-inch WSVGA display specifications
93
Hard drive specifications
500-GB*
320-GB*
250-GB*
Height
9.5 mm
9.5 and 7.0 mm
9.5 and 7.0 mm
Width
70 mm
70 mm
70 mm
Weight
101 g
101 g
101 g
Interface type
SATA
SATA
SATA
Single track
3 ms
3 ms
3 ms
Average (read/write)
13 ms
13 ms
13 ms
Maximum
24 ms
24 ms
24 ms
Logical blocks
1,048,576,000
625,141,400
488,397,168
Disk rotational speed
5400 rpm
7200 and
5400 rpm
7200 and
5400 rpm
Dimensions
Seek times (typical read, including setting)
Operating temperature
0°C to 60°C (32°F to 140°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less.
NOTE:
94
Certain restrictions and exclusions apply. Contact technical support for details.
Chapter 6 Specifications
7
Backup and recovery
To protect your information, use Windows Backup and Restore to back up individual files and folders,
back up your entire hard drive (select models only), create system repair discs (select models only) by
using the installed optical drive (select models only) or an optional external optical drive, or create
system restore points. In case of system failure, you can use the backup files to restore the contents of
your computer.
Windows Backup and Restore provides the following options:
●
Creating a system repair disc (select models only) by using the installed optical drive (select
models only) or an optional external optical drive
●
Backing up your information
●
Creating a system image (select models only)
●
Scheduling automatic backups (select models only)
●
Creating system restore points
●
Recovering individual files
●
Restoring the computer to a previous state
●
Recovering information using recovery tools
NOTE: For detailed instructions, perform a search for these topics in Help and Support.
In case of system instability, HP recommends that you print the recovery procedures and save them for
later use.
NOTE: Windows includes the User Account Control feature to improve the security of your computer.
You may be prompted for your permission or password for tasks such as installing software, running
utilities, or changing Windows settings. Refer to Help and Support for more information.
95
Backing up your information
Recovery after a system failure is as good as your most recent backup. You should create system repair
discs (select models only) by using the installed optical drive (select models only) or an optional external
optical drive, and your initial backup immediately after software setup. As you add new software and
data files, you should continue to back up your system on a regular basis to maintain a reasonably
current backup. The system repair discs (select models only) are used to start up (boot) the computer
and repair the operating system in case of system instability or failure. Your initial and subsequent
backups allow you to restore your data and settings if a failure occurs.
You can back up your information to an optional external hard drive, a network drive, or discs.
Note the following when backing up:
●
Store personal files in the Documents library, and back it up regularly.
●
Back up templates that are stored in their associated programs.
●
Save customized settings that appear in a window, toolbar, or menu bar by taking a screen shot
of your settings. The screen shot can be a time-saver if you have to reset your preferences.
●
When backing up to discs, use any of the following types of discs (purchased separately): CD-R,
CD-RW, DVD+R, DVD+R DL, DVD-R, DVD-R DL, or DVD±RW. The discs you use will depend on the
type of external optical drive you are using.
NOTE: DVDs and DVDs with double-layer (DL) support store more information than CDs, so
using them for backup reduces the number of recovery discs required.
●
When backing up to discs, number each disc before inserting it into the external drive.
To create a backup using Backup and Restore:
NOTE: Be sure that the computer is connected to AC power before you start the backup process.
NOTE: The backup process may take over an hour, depending on file size and the speed of
the computer.
96
1.
Select Start > All Programs > Maintenance > Backup and Restore.
2.
Follow the on-screen instructions to set up your backup, create a system image (select models
only), or create a system repair disc (select models only).
Chapter 7 Backup and recovery
Performing a system recovery
In case of system failure or instability, the computer provides the following tools to recover your files:
●
Windows recovery tools: You can use Windows Backup and Restore to recover information you
have previously backed up. You can also use Windows Startup Repair to fix problems that might
prevent Windows from starting correctly.
●
f11 recovery tools: You can use the f11 recovery tools to recover your original hard drive image.
The image includes the Windows operating system and software programs installed at the factory.
NOTE: If you are unable to boot (start up) your computer and you cannot use the system repair discs
you previously created (select models only), you must purchase a Windows 7 operating system DVD to
reboot the computer and repair the operating system. For additional information, refer to the “Using a
Windows 7 operating system DVD (purchased separately)” section.
Using the Windows recovery tools
To recover information you previously backed up:
1.
Select Start > All Programs > Maintenance > Backup and Restore.
2.
Follow the on-screen instructions to recover your system settings, your computer (select models
only), or your files.
To recover your information using Startup Repair, follow these steps:
CAUTION: Using Startup Repair completely erases hard drive contents and reformats the hard drive.
All files you have created and any software installed on the computer are permanently removed. When
reformatting is complete, the recovery process restores the operating system, as well as the drivers,
software, and utilities from the backup used for recovery.
1.
If possible, back up all personal files.
2.
If possible, check for the presence of the Windows partition and the HP Recovery partition.
To check for the Windows partition, select Start > Computer.
To check for the HP Recovery partition, click Start, right-click Computer, click Manage, and
then click Disk Management.
NOTE: If the Windows partition and the HP Recovery partition are not listed, you must recover
your operating system and programs using the Windows 7 operating system DVD and the Driver
Recovery disc (both purchased separately). For additional information, refer to the “Using a
Windows 7 operating system DVD (purchased separately)” section.
3.
If the Windows partition and the HP Recovery partition are listed, restart the computer, and then
press f8 before the Windows operating system loads.
4.
Select Startup Repair.
5.
Follow the on-screen instructions.
Performing a system recovery
97
NOTE: For additional information on recovering information using the Windows tools, perform a
search for these topics in Help and Support.
Using f11 recovery tools
CAUTION: Using f11 completely erases hard drive contents and reformats the hard drive. All files
you have created and any software installed on the computer are permanently removed. The f11
recovery tool reinstalls the operating system and HP programs and drivers that were installed at the
factory. Software not installed at the factory must be reinstalled.
To recover the original hard drive image using f11:
1.
If possible, back up all personal files.
2.
If possible, check for the presence of the HP Recovery partition: click Start, right-click Computer,
click Manage, and then click Disk Management.
NOTE: If the HP Recovery partition is not listed, you must recover your operating system and
programs using the Windows 7 operating system DVD and the Driver Recovery disc (both
purchased separately). For additional information, refer to the “Using a Windows 7 operating
system DVD (purchased separately)” section.
3.
If the HP Recovery partition is listed, restart the computer, and then press esc while the “Press the
ESC key for Startup Menu” message is displayed at the bottom of the screen.
4.
Press f11 while the <Press F11 for recovery> message is displayed.
5.
Follow the on-screen instructions.
Using a Windows 7 operating system DVD (purchased separately)
To order a Windows 7 operating system DVD, go to http://www.hp.com/support, select your country
or region, and follow the on-screen instructions. You can also order the DVD by calling technical
support. For contact information, refer to the Worldwide Telephone Numbers booklet included with
the computer.
CAUTION: Using a Windows 7 operating system DVD completely erases hard drive contents and
reformats the hard drive. All files you have created and any software installed on the computer are
permanently removed. When reformatting is complete, the recovery process helps you restore the
operating system, as well as drivers, software, and utilities.
To initiate recovery using a Windows 7 operating system DVD:
NOTE: This process takes several minutes.
98
1.
If possible, back up all personal files.
2.
Restart the computer, and then insert the Windows 7 operating system DVD into the optical drive
before the Windows operating system loads.
3.
When prompted, press any keyboard key.
4.
Follow the on-screen instructions.
Chapter 7 Backup and recovery
5.
Click Next.
6.
Select Repair your computer.
7.
Follow the on-screen instructions.
After the repair is completed:
1.
Eject the Windows 7 operating system DVD, and then insert the Driver Recovery disc.
2.
Install the Hardware Enabling Drivers first, and then install Recommended Applications.
Performing a system recovery
99
8
Power cord set requirements
The wide-range input feature of the computer permits it to operate from any line voltage from 100 to
120 volts AC, or from 220 to 240 volts AC.
The 3-conductor power cord set included with the computer meets the requirements for use in the
country or region where the equipment is purchased.
Power cord sets for use in other countries and regions must meet the requirements of the country or
region where the computer is used.
Requirements for all countries
The following requirements are applicable to all countries and regions:
100
●
The length of the power cord set must be at least 1.5 m (5.0 ft) and no more than 2.0 m (6.5 ft).
●
All power cord sets must be approved by an acceptable accredited agency responsible for
evaluation in the country or region where the power cord set will be used.
●
The power cord sets must have a minimum current capacity of 10 A and a nominal voltage rating
of 125 or 250 V ac, as required by the power system of each country or region.
●
The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320
Standard Sheet C13 connector for mating with the appliance inlet on the back of the computer.
Chapter 8 Power cord set requirements
Requirements for specific countries and regions
Country/region
Accredited agency
Applicable note number
Argentina
IRAM
1
Australia
SAA
1
Austria
OVE
1
Belgium
CEBEC
1
Brazil
ABNT
1
Canada
CSA
2
Chile
IMQ
1
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
India
ISI
1
Israel
SII
1
Italy
IMQ
1
Japan
JIS
3
The Netherlands
KEMA
1
New Zealand
SANZ
1
Norway
NEMKO
1
The People's Republic of China
CCC
4
Saudi Arabia
SASO
7
Singapore
PSB
1
South Africa
SABS
1
South Korea
KTL
5
Sweden
SEMKO
1
Switzerland
SEV
1
Taiwan
BSMI
6
Thailand
TISI
1
The United Kingdom
ASTA
1
Requirements for specific countries and regions
101
102
Country/region
Accredited agency
Applicable note number
The United States
UL
2
1.
The flexible cord must be Type HO5VV-F, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance
coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region
where it will be used.
2.
The flexible cord must be Type SVT/SJT or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole
grounding type with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V ac) configuration. CSA or C-UL mark.
UL file number must be on each element.
3.
The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the
Japanese Dentori Law. The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² or 1.25-mm² conductor size. The
wall plug must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V ac) configuration.
4.
The flexible cord must be Type RVV, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the CCC certification mark.
5.
The flexible cord must be Type H05VV-F 3X0.75-mm² conductor size. KTL logo and individual approval number must be
on each element. Corset approval number and logo must be printed on a flag label.
6.
The flexible cord must be Type HVCTF 3×1.25-mm² conductor size. Power cord set fittings (appliance coupler, cable, and
wall plug) must bear the BSMI certification mark.
7.
For 127 V ac, the flexible cord must be Type SVT or SJT 3 x 18 AWG, with plug NEMA 5-15P (15 A, 125 V ac), with UL
and CSA or C-UL marks. For 240 V ac, the flexible cord must be Type H05VV-F 3×0.75-/1.00-mm² conductor size, with
plug BS 1363/A with BSI or ASTA marks.
Chapter 8 Power cord set requirements
9
Recycling
When a non-rechargeable or rechargeable battery has reached the end of its useful life, do not dispose
of the battery in general household waste. Follow the local laws and regulations in your area for
battery disposal.
HP encourages customers to recycle used electronic hardware, HP original print cartridges, and
rechargeable batteries. For more information about recycling programs, see the HP Web site at
http://www.hp.com/recycle.
103
Index
A
AC adapter, spare part number
29, 30
AC adapter/battery light 11
Action keys 6
antenna
locations 7
removal 85
spare part number 26, 32, 86
Antenna Kit, spare part number
26, 32, 86
audio, product description 2
audio-in jack 12
audio-out jack 12
B
base enclosure, spare part
numbers 24, 31, 34
battery
removal 50
spare part numbers 24, 31,
50
battery bay 13
battery/service cover release
latch 13
bottom components 13
button components 8
buttons
power 8
TouchPad 10
TouchPad on/off 10
Web browser 8
C
cables, service considerations 43
caps lock light 9
chipset, product description 1
components
bottom 13
104
Index
buttons 8
display 7
keys 6
left-side 11
lights 9
right-side 12
TouchPad 10
computer feet, locations 49
computer major components 16
computer part number 48
computer specifications 92
connectors, service
considerations 43
corner cover
spare part number 32
corner covers
spare part number 25
display panel
product description 1
removal 84
spare part number 26, 32, 84
display panel cable
removal 85
spare part number 26, 32, 85
drives, preventing damage 44
DVD±RW DL SuperMulti Drive
precautions 44
spare part number 28, 34
D
Digital Media Slot 12
display
components 7
specifications 93
display assembly
removal 81
spare part numbers 17, 31,
32, 34, 41, 42, 81
subcomponents 26
display bezel
removal 82
spare part numbers 26, 32,
83
Display Cable Kit, spare part
number 26, 85
display enclosure, spare part
numbers 26, 32, 34
Display Hinge Kit, spare part
number 26, 84
F
fan
E
electrostatic discharge 44
equipment guidelines 47
Ethernet, product description 2
external monitor port 11
removal 77
spare part number 24, 31, 77
feet, locations 49
fn key 6
G
graphics, product description 1
grounding guidelines 44
guidelines
equipment 47
grounding 44
packaging 46
transporting 46
workstation 46
H
hard drive
precautions 44
product description 2
removal 59
spare part numbers 24, 28,
31, 59
specifications 94
hard drive bracket
illustrated 28
removal 60
hard drive connector cable
illustrated 28
removal 60
Hard Drive Hardware Kit, spare
part number 24, 28, 34, 59
hard drive light 11
hard drive rubber isolator
illustrated 28
removal 60
headphone jack 12
heat sink
removal 79
spare part number 24, 32, 79
hinge
removal 84
spare part number 26, 84
J
jacks
audio-in 12
audio-out 12
headphone 12
microphone 12
network 12
RJ-45 12
K
key components 6
keyboard
product description 4
removal 61
spare part numbers 17, 32,
33, 34, 35, 36, 37, 38, 39,
40, 41, 61
keys
Action 6
fn 6
Windows applications 6
Windows logo 6
L
left-side components 11
light components 9
lights
AC adapter/battery
caps lock 9
hard drive 11
mute 9
power 9
TouchPad 9, 10
webcam 7
wireless 9
11
M
mass storage device
precautions 44
removal 59
spare part numbers 28, 59
memory module
product description 2
removal 57
spare part number 24, 30, 57
microphone
location 7
product description 2
microphone jack 12
model description 49
model name 1
monitor port 11
mouse, spare part number 29, 30
mute light 9
N
network jack 12
O
operating system, product
description 4
optical drive
precautions 44
spare part number 28, 34
P
packaging guidelines 46
plastic parts, service
considerations 43
pointing device, product
description 4
ports
external monitor 11
monitor port 11
product description 4
USB 11, 12
power button 8
power connector 11
power connector cable
removal 76
spare part number 24, 32, 76
power cord
set requirements 100
spare part numbers 29, 30
power light 9
power requirements, product
description 4
processor, product description 1
product description
audio 2
chipset 1
display panel 1
Ethernet 2
external media cards 3
graphics 1
hard drives 2
keyboard 4
memory module 2
microphone 2
operating system 4
pointing device 4
ports 4
power requirements 4
processors 1
product name 1
security 4
serviceability 5
video 2
wireless 3
product name 1, 48
product number 48
R
removal/replacement
preliminaries 43
procedures 48
right-side components 12
RJ-45 jack 12
RTC battery
removal 58
spare part number 24, 30, 58
Rubber Kit, spare part number
25, 31
S
Screw Kit, spare part number
31
Index
29,
105
security cable slot 12
security, product description 4
serial number 48
service considerations
cables 43
connectors 43
plastic parts 43
service cover
location 13
removal 52
spare part numbers 24, 31,
32, 34, 53
service tag 15, 48
serviceability, product description
5
SIM, removal 51
sleeve, spare part numbers 29,
30
speakers
removal 73
spare part number 23, 31, 73
specifications
computer 92
display 93
hard drive 94
system board
removal 74
spare part numbers 23, 41,
42, 74
T
tools required 43
top cover
removal 67
spare part numbers 23, 31,
32, 34, 67
TouchPad button 10
TouchPad components 10
TouchPad light 9, 10
TouchPad on/off button 10
TouchPad zone 10
transporting guidelines 46
U
USB port 11, 12
V
vents 11
video, product description 2
106
Index
W
warranty period 49
Web browser button 8
webcam 7
webcam light 7
webcamera/microphone module
removal 83
spare part number 26, 32, 83
Windows applications key 6
Windows logo key 6
wireless antenna
locations 7
removal 85
spare part number 26, 32, 86
wireless light 9
wireless, product description 3
WLAN module
removal 52
spare part numbers 24, 30,
32, 52
workstation guidelines 46
WWAN module
removal 55
spare part numbers 24, 30,
55