DP-758
7” Widescreen Color TFT LCD Digital Photo Frame
Instruction Manual
Please read this manual carefully before operation
Precautions
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operation and servicing
instructions in the literature accompanying the appliance.
For Customer Use:
Enter below the serial number that is located on the bottom of
the unit. Retain this information for future reference.
Model No.
DP-758
Serial No.
For recycling or disposal information about this product,
please contact your local authorities or the Electronics Industries Alliance: www.eiae.org.
Page Coby Electronics Corporation
Precautions
WARNING:
To prevent fire or shock hazard, do not expose this device to rain or moisture. Dangerous high
voltage is present inside the enclosure. Do not open the cabinet.
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot of outlet and fully insert.
www.cobyusa.com
Page Important Safety Instructions
1.
Read Instructions: All the safety and operating instructions should be read before the
product is operated.
2.
Retain Instructions: The safety and operating instructions should be retained for future
reference.
3.
Heed Warnings: All warnings on the product and in the operating instructions should
be adhered to.
4.
Follow Instructions: All operating and usage instructions should be followed.
5.
Cleaning: Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6.
Attachments: Use only attachments recommended by the manufacturer. Use of other
attachments may be hazardous.
7.
Water and Moisture: Do not use this product near water (e.g., near a bath tub, washbowl,
kitchen sink, laundry tub, in wet basements, or near a swimming pool and the like).
8.
Accessories: Do not place this product on an unstable cart, stand, tripod, bracket, or
table. Use only with carts, stands, tripods, brackets, or tables recommended by the
manufacturer or sold with the product. Any mounting of the product should follow the
manufacturer’s instructions and should use a mounting accessory recommended by
the manufacturer.
9.
A product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the product and cart
combination to overturn.
10.
Ventilation: Slots and openings in the cabinet are provided for ventilation
to ensure reliable operation of the product and to protect it from overheating. These openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is provided or the manufacturer
instructions have been adhered to.
11.
Power Sources: This product should be operated only from the type of power source
indicated on the rating label. If you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For products intended to operate
from battery power or other sources, refer to the operating instructions.
12.
Grounding or Polarization: This product may be equipped with a polarized alternatingcurrent line plug that has one blade wider than the other. This plug will only fit into the
power outlet in one direction. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the direction of the plug. If the plug should still fail to fit,
contact an electrician to replace the obsolete outlet. Do not defeat the safety purpose
of the polarized plug.
13.
Power-Cord Protection: Power supply cords should be routed so that they are not likely
to be walked on or pinched by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and at the point which they exit
from the product.
Page Coby Electronics Corporation
Important Safety Instructions
14.
Protective Attachment Plug: The product may be equipped with an attachment plug with
overload protection. This is a safety feature. See the operating instructions for replacement or directions to reset the protective device. If replacement of the plug is required,
be sure the service technician has used a replacement plug that has the same overload
protection as the original plug as specified by the manufacturer.
15.
Outdoor Antenna Grounding: If an outside antenna is connected to the product, be sure
the antenna system is grounded so as to provide some protection against voltage surges
and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA
70 provides information with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding
conductors, location of antenna- discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode (see figure).
16.
Lightning: For added protection for this product, unplug it from the wall outlet and disconnect the antenna or cable system during a lightning storm or when it is left unattended
and unused for long periods of time. This will prevent damage to the product due to
lightning or power-line surges.
17.
Power Lines: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna system, extreme care should
be taken to keep from touching such power lines or circuits, as contact with them might
be fatal.
18.
Overloading: Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
www.cobyusa.com
Page Important Safety Instructions
19.
Object and Liquid Entry: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or shout-out parts that could result in
a fire or electric shock. Never spill liquid of any kind on the product.
20.
Servicing: Do not attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.
21.
Damage Requiring Service: Unplug this product from the wall outlet and refer servicing
to qualified service personnel under the following conditions: a) when the power-supply
or plug is damaged; b) if liquid has been spilled or if objects have fallen into the product;
c) if the product has been exposed to rain or water; d) if the product does not operate
normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result
in damage and will often require extensive work by a qualified technician to restore the
product to its normal operation; e) if the product has been dropped or damaged in any
way; f) when the product exhibits a distinct change in performance—this indicates a
need for service.
22.
Replacement Parts: When replacement parts are required, be sure that your service
technician has used replacement parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
23.
Safety Check: Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to ensure that the product is in proper operating
condition.
24.
Wall or Ceiling Mounting: The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
25.
Heat: The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
Page Coby Electronics Corporation
Table of Contents
Precautions......................................................................................2
Important Safety Instructions....................................................4
Table of Contents............................................................................7
Package Contents & Features......................................................9
Package Contents................................................................................................9
Features...............................................................................................................9
Location of Controls................................................................. 10
Top View.............................................................................................................10
Left View............................................................................................................10
Front View..........................................................................................................10
Right View..........................................................................................................10
Getting Started.............................................................................. 11
Installing a Memory Card................................................................................... 11
Powering your Digital Picture Frame................................................................. 11
Item List Screen................................................................................................. 12
Select Card Screen............................................................................................ 13
Photo Slideshow................................................................................................ 13
To View Next / Previous Photo.......................................................................... 13
Photo Mode..................................................................................... 13
To Rotate the Photo / Change the screen ratio................................................. 14
Calendar with Time Screen............................................................................... 15
Clock Mode.................................................................................... 15
Setup Mode....................................................................................... 16
Setup Screen.....................................................................................................16
To adjust the Picture/Clock/LCD settings & Reset............................................ 16
Setup Mode....................................................................................... 17
Interchangeable Faceplates...................................................... 18
www.cobyusa.com
Page Table of Contents
Firmware Upgrades....................................................................... 19
Troubleshooting...........................................................................20
Specifications................................................................................22
Notes.................................................................................................23
Page Coby Electronics Corporation
Package Contents & Features
Package Contents
Please make sure that the items shown below are included in the package. Should
an item be missing, please contact the local retailer from which you purchased this
product.
Features
•
7” Widescreen TFT LCD Color
Screen
•
Displays JPEG Photo Files
•
MS and SD/MMC Card Slots
•
USB Port for Fast File Transfers
www.cobyusa.com
•
Interchangeable Faceplate
•
Detachable Stand
•
Wall Mountable
Page Location of Controls
Top View
1.
Menu
Press for exit
2.
Enter/Slideshow
Press for Enter
Press for Slideshow
6.
Right
Press for Right during
selecting
Press for Full screen /
Original screen
(In Photo Mode)
Front View
10. 7” TFT LCD
Right View
11. Power Switch (On / Off)
3.
Down
Left View
12. Power In Jack
4.
Up
7.
Memory Stick (MS)
13. Detachable Kickstand
5.
Left
Press for Left during
selecting
Press for rotating
(In Photo Mode)
8.
Secure Digital (SD) /
Multi Media Card (MMC)
9.
USB Port (connect to a
computer)
Page 10
Coby Electronics Corporation
Getting Started
Installing a Memory Card
Your photo frame supports the following types of memory cards:
•
Compact Flash cards (CF)
•
Secure Digital cards (SD)
•
MultiMedia Card (MMC)
Simply insert the memory card of your choice into its corresponding card slot located on the left panel of the photo frame. Take care to orient the card in the proper
direction.
Getting photos and files onto your picture frame for viewing couldn’t be easier!
Powering your Digital Picture Frame
Your Photo Frame should be connected to
an AC 100-240V wall outlet.
•
Using the supplied power adapter,
plug one end of the adapter into
your photo frame’s Power In Jack
and plug the other end into an AC
100-240V wall outlet.
Do not connect the power plug to a power outlet other than that
which is indicated here or on the label as this may result in the risk
of fire or electric shock.
Do not handle the power plug with wet hands. Doing so may cause
electric shock.
Use only the AC adapter supplied with the photo frame. Failure to
do so may cause a fire or damage the player.
www.cobyusa.com
Page 11
Getting Started
Item List Screen
Upon turning on the power, your photo frame will display the “ITEM LIST” screen
show below.
Page 12
Coby Electronics Corporation
Photo Mode
Select Card Screen
•
Insert MS or SD/MMC card to the corresponding slot.
•
Select PHOTO in Item List screen and press ENTER, the
“Select Card” screen appears on LCD shown below.
Selecting: A card icon that is in-color with highlighted frame indicates that
the card is being selected.
Inserted: A card icon that is in-color indicates that the card has been inserted.
No Card: A card icon that is grayed-out indicates that the card has not been installed for use.
Photo Slideshow
•
Press
or
to select the desired inserted card.
•
Press ENTER to start playing Photo slideshow.
To View Next / Previous Photo
•
In slideshow mode, press ENTER for “SINGLE SHOW”.
•
Press
to view the next photo.
•
Press
to view the previous photo.
www.cobyusa.com
Page 13
Photo Mode
To Rotate the Photo / Change the screen ratio
Press
to rotate the photo to angles shown below:
•
Rotation 90° → Rotation 180° → Rotation 270° → Original
•
Press
to toggle the screen ratio between Full Screen and Original.
To adjust the photo slideshow speed to Fast / Middle / Slow, please
turn to Setup section.
Page 14
Coby Electronics Corporation
Clock Mode
Calendar with Time Screen
•
Insert MS or SD/MMC card to the corresponding slot.
•
Select CLOCK on Item List screen and press ENTER, the “Calendar with
Time” screen appears on LCD shown below.
•
Press
/
to select a year number, repeatedly press this button will
increase / decrease the number of years.
•
Press
/
to select a month number, repeatedly press this button will
decrease / increase the number of months.
•
To adjust the time and day, please turn to Setup section.
NOTE: This Digital Photo Frame has no flash memory, so date and time re-
quire adjusting manually after turning on the player.
www.cobyusa.com
Page 15
Setup Mode
Setup Screen
•
Insert MS or SD/MMC card to the corresponding slot.
•
Select SETUP on Item List screen and press ENTER, the SETUP screen
appears on LCD shown below.
To adjust the Picture/Clock/LCD settings & Reset
•
Press
/
to select Picture/Clock/LCD/System in Setup List.
•
Press ENTER to select the sub-settings.
Picture:
•
Use
to select the desired item.
Press MENU to go back to Setup List.
Clock:
•
Press
/
to move cursor between time and date, and press
/
to adjust the time and date which will be displayed on Clock screen before
turning off the player.
•
Press ENTER to confirm the Selection.
Page 16
Coby Electronics Corporation
Setup Mode
LCD:
•
Press
/
to select different items.
•
Press
/
to adjust the values and press ENTER to confirm.
/
to select Ok/Cancel and press ENTER to confirm.
System Reset
•
Press
www.cobyusa.com
Page 17
Interchangeable Faceplates
To affix a faceplate to your photo frame:
1.
Attach the faceplate to the main unit and rotate
the clips in the direction of the arrows at a +/-90°
angle.
2.
Now it has been affixed to the surface of the
photo frame.
To detach the faceplate from your photo frame.
1.
Rotate the clips in the direction of the arrows at a +/-90° angle.
2.
Simply remove the main unit from the faceplate, the faceplate has been
detached.
Page 18
Coby Electronics Corporation
Firmware Upgrades
From time to time, COBY may release firmware updates to improve the performance of the DP-758 or to add additional features. Please check the COBY website periodically at www.cobyusa.com to see if new firmware has been released for
your photo frame.
www.cobyusa.com
Page 19
Troubleshooting
If you have a problem with this unit, please read the troubleshooting guide below
and check our website at www.cobyusa.com for Frequently Asked Questions
(FAQs) and firmware updates. If these resources do not resolve the problem,
please contact Technical Support.
COBY Electronics Technical Support
56-65 Rust Street
Maspeth, NY 11378
Email:
techsupport@cobyusa.com
Web:
www.cobyusa.com
Phone: 800-727-3592 (8:00 AM–11:00 PM EST, seven days a week)
800-681-2629 (8:00 AM–5:30 PM EST, Monday to Friday)
718-416-3197 (8:00 AM–5:30 PM EST, Monday to Friday)
The player does not turn on.
•
Make sure the unit has been powered on manually (i.e., the Power Switch has
been physically set to the ON position).
•
Ensure that the power cord has been properly connected to the power outlet.
I cannot select a memory card.
•
Ensure that a memory card has been installed.
•
Ensure that the memory card is properly installed.
•
Ensure that the memory card is not defective.
The picture is noisy or distorted.
•
Reset the color system of the TV set.
•
Ensure that the photo frame is connected using the RCA AV cable.
Page 20
Coby Electronics Corporation
Troubleshooting
The photo frame has malfunctioned.
•
Turn the photo frame off and let it rest for 30 minutes. After that, turn on the
photo frame -- the restore function should reset the photo frame.
•
Try updating the player’s firmware. Please refer to the Firmware Upgrade
section of this manual for detailed instructions.
www.cobyusa.com
Page 21
Specifications
Display Type
7” Full-Color TFT LCD
Display Resolution
480 x 3 (RGB) x 234
Memory
MS Card Slot
SD/MMC Card Slot
Photo Format Support
JPEG (8MB)
USB Port
USB 2.0 High-Speed
Power Supply
DC 12V, 1A
100-240V AC Adapter
Specifications and manual are subject to change without prior notice.
Page 22
Coby Electronics Corporation
Notes
www.cobyusa.com
Page 23
COBY Electronics Corp.
56-65 Rust Street
Maspeth, NY 11378
www.cobyusa.com
www.ecoby.com