HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 1 ENGLISH DEUTSCH HR400/HR450 FRANÇAIS NEDERLANDS As an ENERGY STAR® Partner, LG has determined that this product or product models meet the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark. P/NO : MFL46897347 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless 2 4:25 PM Page 2 proper ventilation is provided or the manufacturer's instruction has been adhered to. CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service centre. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service centre. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. This product is manufactured to comply with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. European representative: LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere, The Netherlands (Tel : +31-036-547-8940) HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 Notes on Copyrights Recording equipment should be used only for lawful copying and you are advised to check carefully what is lawful copying in the area in which you are making a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the rights owner. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. Because AACS (Advanced Access Content System) is approved as content protection system for BD format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection systems for BD format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+, or this product, please contact an authorized Customer Service Centre. 4:25 PM Page 3 Many BD-ROM/DVD discs are encoded with copy protection. Because of this, you should only connect your player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected discs. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use, display, distribution, or revision of television programs, videotapes, BD-ROM discs, DVDs, CDs and other materials may subject you to civil and/or criminal liability. Software Update (Disc playback and network features only) The software of the player can be updated by connecting it to the Internet using the LAN cable. We recommend to update the player using the latest software to enhance the products operation and/or add new features (see page 58). Open source software notice This product includes Freetype library : copyright © 2003 The FreeType Project (www.freetype.org). Zlib compression library developed by Jean-loup Gailly and Mark Adler. Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler Doubly Linked List licensed by Artistic license. You can download this software from http://freshmeat.net/projects/linklist/ To use BD-Live functionality You must attach a USB Flash Drive using the USB port (see page 24). What is SIMPLINK? Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection. Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc. Refer to the TV owner’s manual for the details of SIMPLINK function. LG TV’s with SIMPLINK function have the logo as shown above. Note: Depending on the disc type or playing status, some SIMPLINK operation may differ from your purpose or not work. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. 3 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 4 Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Advanced Digital Out are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. “BD-LIVE” logo is trademark of Blu-ray Disc Association. “DVD Logo” is trademark of DVD Format/Logo Licensing Corporation. “x.v.Color” is trademark. “Blu-ray Disc” is trademark. “BONUSVIEW” is trademark of Blu-ray Disc Association. This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com. “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. YouTube is a trademark of Google Inc. 4 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 5 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-9 Using the DISC Home Menu . . . . . . . . . . . . . . . . . . . . . . . . .38 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11 Adjust the Disc Setup settings . . . . . . . . . . . . . . . . . . . .39-44 Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Play a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45-47 Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Displaying disc Information . . . . . . . . . . . . . . . . . . . . . . . . . .48 Connections to your TV . . . . . . . . . . . . . . . . . . . . . . . . . .14-18 Enjoying BD-LIVE™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49-50 Connections to an amplifier . . . . . . . . . . . . . . . . . . . . . .18-19 Playing a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-51 The unit’s Audio Output Specifications . . . . . . . . . . . . . .19-20 Listening to a music . . . . . . . . . . . . . . . . . . . . . . . . . . . .52-53 Resolution Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-21 Viewing a photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53-54 Internet connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23 Playing YouTube videos . . . . . . . . . . . . . . . . . . . . . . . . . .55-57 Network update notification . . . . . . . . . . . . . . . . . . . . . . . . . .23 Using a USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Software update (Disc playback and network features only) . . . . . . . . . . . . .58 Auto Channel setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .25-26 Code numbers of controllable TVs . . . . . . . . . . . . . . . . .59-61 Using the HDD Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . .26 Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 Adjust the Channel Setup settings . . . . . . . . . . . . . . . . .27-29 Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 Using the digital EPG . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-31 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63-65 Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-33 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 Editing a title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34-35 Network Service (Disc playback and network features only) . . . . . . . . . . . . .67 Displaying HDD Information . . . . . . . . . . . . . . . . . . . . . . .36-37 Playing a HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Open source software notice . . . . . . . . . . . . . . . . . . . . . . . .68 Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. 5 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 6 Introduction To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your player. Should the unit require service, contact an authorized service location. About the Symbol Display “ “ may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media. Symbols Used in this Manual Note: Indicates special notes and operating features. Tip: Indicates tips and hints for making the task easier. A section whose title has one of the following symbols are applicable only to the disc represented by the symbol. ALL HDD BD All discs listed below Titles recorded on the HDD BD-ROM disc DVD DVD-Video, DVD±R/RW in Video mode or VR mode and finalized AVCHD DVD±R/RW in AVCHD format DivX DivX files ACD Audio CDs MP3 MP3 files WMA WMA files 6 Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean Do not use volatile liquids such as insecticide spray near the unit. Wiping with strong pressure may damage the surface. Do not leave rubber or plastic products in contact with the unit for a long period of time. Cleaning the unit To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. Maintaining the Unit The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. For details, please contact your nearest authorized service centre. Notes on Discs Handling Discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the centre out. Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records. HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 7 Playable Discs Blu-ray Disc - Discs such as movies that can be purchased or rented - BD-R/RE discs that contain audio titles, DivX, MP3, WMA, or Photo files. DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented DVD-R (8 cm / 12 cm disc) - Video mode and finalized only - Supports the dual layer disc also - AVCHD format - DVD-R discs that contain audio titles, DivX, MP3, WMA, or Photo files. DVD-RW (8 cm / 12 cm disc) - VR mode, Video mode and finalized only - AVCHD format - DVD-RW discs that contain audio titles, DivX, MP3, WMA, or Photo files. DVD+R (8 cm / 12 cm disc) - Finalized disc only - Supports the dual layer disc also - AVCHD format - DVD+R discs that contain audio titles, DivX, MP3, WMA, or Photo files. DVD+RW (8 cm / 12 cm disc) - Video mode and finalized only - AVCHD format - DVD+RW discs that contain audio titles, DivX, MP3, WMA, or Photo files. Notes on discs Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions. Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may not be playable. DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Unit may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Unit’s lens. If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.) This unit requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. Audio CD (8 cm / 12 cm disc) Audio CDs or CD-Rs/CD-RWs in audio CD format that can be purchased CD-R/CD-RW (8 cm / 12 cm disc) CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or Photo files. 7 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 8 BD-ROM Disc Features BD-ROM Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single sided disc - about 5 to 10 times the capacity of a DVD. BD-ROM Discs also support the highest quality HD video available in the industry (up to 1920 x 1080) - Large capacity means no compromise on video quality. Furthermore, a BD-ROM disc has the same familiar size and look as DVD. The following BD-ROM disc features are disc dependent and will vary. Appearance and navigation of features will also vary from disc to disc. Menu sounds When you highlight or select a menu option, sounds can be heard such as button clicks or a voice-over explaining the highlighted menu choice. Multi-page/PopUp Menus With DVD-Video, playback is interrupted each time a new menu screen is accessed. Due to BD-ROM disc’s ability to preload data from the disc without interrupting playback, a menu can consist of several pages. You can browse through the menu pages or select different menu paths, while the audio and video remain playing in the background. Not all discs will have the features described below. Interactivity Certain BD-ROM Discs may contain animated menus and/or trivia games. BD-ROM, Hybrid disc have both BD-ROM and DVD (or CD) layers on one side. On such discs, BD-ROM layer will be only played back in this player. User Browsable Slideshows With BD-ROM Discs, you can browse through various still pictures while the audio remains playing. Video highlights The BD-ROM format for movie distribution supports three highly advanced video codecs, including MPEG-2, MPEG4 AVC (H.264), and SMPTE VC1. HD video resolutions are also available: 1920 x 1080 HD Subtitles Depending on what is contained on the BD-ROM disc, you may be able to select different font styles, sizes and colours for some subtitles. Subtitles may also be animated, scrolled or faded in and out. 1280 x 720 HD Graphic planes Two individual, full HD resolution (1920x1080) graphic planes (layers) are available, on top of the HD video layer. One plane is assigned to videorelated, frame accurate graphics (like subtitles), and the other plane is assigned to interactive graphic elements, such as buttons or menus. For both planes, various wipes, fades and scroll effects may be available. For High-Definition Playback To view high-definition contents from BD-ROM discs, an HDTV is required. Some discs may require HDMI OUT for viewing of high-definition contents. Ability to view high-definition contents in BD-ROM discs may be limited depending on the resolution of your TV. 8 BD-J Interactive Capability The BD-ROM format supports Java for interactive functions. “BD-J” offers content providers almost unlimited functionality when creating interactive BD-ROM titles. BD-ROM Disc Compatibility This player supports BD-ROM Profile 2. • Discs supporting BD-Live (BD-ROM version 2 Profile 2) that allows interactive functions to be used when this unit is connected to the Internet in addition to the BONUSVIEW function. • Discs supporting BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1/Final Standard Profile) that allows Virtual packages or Picture-inPicture functions to be used. HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 9 Regional Code Certain System Requirements This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”. For high definition video playback: AVCHD (Advanced Video Codec High Definition) • This player can playback AVCHD format discs. These discs are normally recorded and used in camcorders. • The AVCHD format is a high definition digital video camera format. • The MPEG-4 AVC/H.264 format is capable of compressing images at higher efficiency than that of the conventional image compressing format. • Some AVCHD discs use the “x.v.Colour” format. • This player can playback AVCHD discs using “x.v.Colour” format. • Some AVCHD format discs may not play, depending on the recording condition. • AVCHD format discs need to be finalized. • “x.v.Colour” offers a wider colour range than normal DVD camcorder discs. Compatibility Notes • Because BD-ROM is a new format, certain disc, digital connection and other • • • • compatibility issues are possible. If you experience compatibility problems, please contact an authorized Customer Service Centre. Viewing high-definition content and up-converting standard DVD content may require a HDMI-capable input or HDCP-capable DVI input on your display device. Some BD-ROM and DVD discs may restrict the use of some operation commands or features. Dolby TrueHD, Dolby Digital Plus and DTS-HD are supported with maximum 7.1 channels if you use HDMI connection for the audio output of the unit. You can use a USB Flash Drive that is used to store some disc related information, including downloaded on-line content. The disc you are using will control how long this information is retained. • High definition display that has COMPONENT or HDMI input jacks. • BD-ROM disc with high definition content. • HDMI or HDCP capable DVI input on your display device is required for some content (as specified by disc authors). • For up-conversion of standard definition DVD, a HDMI or HDCP capable DVI input on your display device is required for copy protected content. For Dolby® Digital Plus, Dolby TrueHD and DTS-HD multi-channel audio playback: • An amplifier/receiver with a built-in (Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD) decoder. • Main, center, surround speakers and subwoofer as necessary for chosen format. Important Notice for TV colour system The colour system of this player differs according to currently playing discs or video contents (YouTube, etc.). For example, when the player plays back the disc recorded in the NTSC colour system, the image is outputted as a NTSC signal. Only the multi system colour TV can receive all signals outputted from the player. Notes: • If you have a PAL colour system TV, you will see just distorted images when using discs or video contents recorded in NTSC. • The multi system colour TV changes the colour system automatically according to input signals. In case that the colour system is not changed automatically, turn it off and then on to see normal images on screen. • Even if the disc and video contents (Youtube,etc.) recorded in NTSC colour system are well displayed on your TV, these may not be recorded correctly on your recorder. 9 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 10 a Remote control a HDD: Selects the unit’s mode to HDD. TITLE/POPUP: Displays the DVD title menu or BD-ROM’s popup menu, if available. DISC: Selects the unit’s mode to DISC. x (STOP): Stops playback. POWER: Switches the unit ON or OFF. B (PLAY): Starts playback. OPEN/CLOSE (Z): Opens and closes the disc tray. X (PAUSE): Pauses playback. AV: Changes the input source (Tuner, AV1-3). REC(z): Starts recording. Press repeatedly to set the recording time. MARKER ( ): Marks any point during playback. SEARCH ( ): Displays or exits the search menu. m / M (SCAN): Searches backward or forward. . / > (SKIP): Go to next or previous chapter/track/file. REPEAT: Repeats a desired section or sequence. AUDIO ( ): Selects an audio language or audio channel. SUBTITLE ( b c ): Selects a subtitle language. ZOOM: Displays or exits the [ZOOM] menu. b c 0-9 numerical buttons: Select numbered options in a menu. PR - / PR+: Scans up or down through memorized channels. EPG: Displays the EPG menu. PIP*: Switches on/off Secondary Video (Picture-in-picture) (BD-ROM only). MENU/LIST: Accesses menu on a DVD disc. Switches between Title List-Playlist menu. b / B / v / V (left/right/up/down): Used to navigate on-screen displays. d TEXT: Switches between teletext mode and normal TV viewing. PR LIST: Displays the channel list. TIME SHIFT: Activates pause live TV/playback (timeshift) for a live TV program (only working in HDD mode). FAV: Displays the favorite program list. PIP AUDIO*: Switch on/off Secondary Audio (BD-ROM only). ENTER ( ): Acknowledges menu selection or displays the program list. TV/DVD: Press to switch between ‘TV mode’, in which you get the picture and sound from the TV’s tuner, and ‘DISC mode’, in which you get picture and sound from this unit. RETURN (O): Exits the menu or resumes playback. The resume play function may work depending on the BD-ROM disc. RESOLUTION: Sets the output resolution for HDMI and COMPONENT VIDEO OUT jacks. CLEAR: Removes a mark on the search menu or a number when setting the password. * Depending on the disc type or the pre-recorded contents of the BD-ROM disc, different functions may be executed or there may be no response when pressing some buttons (depending on media used). DISPLAY: Displays or exits On-Screen Display. 10 Coloured (A, B, C, D) / buttons: Use to navigate BD-ROM menus. They are also used for [MOVIE], [PHOTO] and [MUSIC] menu or use when an EPG screen is displayed or when tuned to a teletext program of a digital broadcast. The function of each button will be described on-screen, and changes depending on the screen being displayed. HOME: Accesses or removes the HOME menu. d TV Control Buttons: You can control the sound level, input source, and power switch of your TV (see page 11). HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 11 Controlling a TV with the Supplied Remote Control You can control the volume, input source, and power state of your TV with the supplied Remote Control. You can control your TV using the buttons below. To programme the remote to control the TV using the manufacturer code If your TV is listed in the table on the next page, set the appropriate manufacturer code. 1 While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV (see page 59-61). • If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. TV Control Buttons TV POWER 2 Release TV POWER button. Notes: • Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. By pressing You can TV POWER Turn the TV on or off. AV Switch the TV’s input source between the TV and other input sources. PR +/– Scan up or down through memorized channels. VOL +/– Adjust the volume of the TV. • If you enter a new code number, the code number previously entered will be erased. • When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again. Note: Depending on the unit being connected, you may not be able to control your TV using some of the buttons. 11 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 12 Front panel a b a Disc Tray Inserts a disc here. b OPEN/CLOSE (Z) Opens or closes the disc tray. c B/X (PLAY / PAUSE) Starts playback. Pause playback or recording temporarily, press again to exit pause mode. BD: Selects the unit’s mode to DISC HDD: Selects the unit’s mode to HDD x (STOP) Stops playback. c d e fg h i j f Display window Shows the current status of the unit. T/S: Indicates the timeshift mode. REC: The unit is recording. HDD: The unit is in HDD mode. DVD: The unit is in DVD mode. : Indicates when the unit is in timer recording or a timer recording is programmed. : Indicates clock, total playing time, elapsed time, title number, chapter/track number, channel, etc. g USB Port Connect a USB Flash Drive. d 1 (POWER) Button Switches the unit ON or OFF. h Remote Sensor Point the remote control here. e AV IN 3 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/ Monitor, VCR, Camcorder, etc.). i m / M (SCAN) Searches backward or forward. PROG. (V / v) Scans down or up through memorized channels. j z (REC) Starts recording. Press repeatedly to set the recording time 12 ( PROG. ( ( ( HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 13 Rear panel a b c d g e h i a AC IN connector Connect the supplied power cord. g AV 1 (SCART JACK) Connect to a TV with SCART jack. b HDMI OUT (1080p) Connect to TV with HDMI inputs. (Interface for digital audio and video) h DIGITAL AUDIO OUT (OPTICAL) Connect to digital (optical) audio equipment. c LAN port Connect a network with an always-on broadband connection. i DIGITAL AUDIO OUT (COAXIAL) Connect to digital (coaxial) audio equipment. d AV2 (DECODER) (SCART JACK) Connect the audio/video output of an external source (Pay-TV decoder, Set Top Box, VCR, etc.). j 2CH AUDIO OUT (Left/Right) Connect to a TV with 2 channel audio inputs. e COMPONENT VIDEO OUT (Y PB PR) Connect to a TV with Y Pb Pr inputs. f j k k ANTENNA OUT (TO TV) Passes the signal from the ANTENNA IN jack to your TV/monitor f ANTENNA IN Connect the aerial to this terminal. 13 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 14 Connections to Your TV Antenna (Digital and/or Analog) Make one of the following connections, depending on the capabilities of your existing equipment. Tip: • Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below. • Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. Cautions: • Make sure the player is connected directly to the TV. Tune the TV to the correct video input channel. • Do not connect the player’s AUDIO OUT jack to the phono in jack (record player) of your audio system. • Do not connect your player via your VCR. The image could be distorted by the copy protection system. TV H (Not supplied) R A Antenna connection Connect the Terrestrial TV antenna (A) to the ANTENNA IN jack on the unit.If you want to use an indoor antenna, use one with a signal amplifier rated at 5V, 100mA and set [Antenna Feed 5V] to [ON] in the setup menu (See page 28). Rear of this unit Notes: Connect one end of the RF cable (R) to ANTENNA OUT(TO TV) jack on the unit and other end to ANTENNA IN jack on your TV. Passes the signal from the ANTENNA IN jack to your TV/monitor. • You must select a HDMI audio output and a maximum sampling frequency that your TV accepts using [HDMI] and [Sampling Freq.] options on the [Setup] menu (see page 41). • If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output. HDMI Connection Tips: If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable (H). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). • When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 20-21.) • Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 39-40). Antenna connection to your TV 14 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 15 Cautions: General about connection • Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again. • When the HDMI connection with HDCP is not verified, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable. • If there is noise or lines on the screen, please check the HDMI cable (length is generally limited to 4.5m). Picture and sound Digital TV is a transmission technology that replaces the traditional analogue technique. This means that several TV channels, radio channels and other digital services can be transmitted on the same space as just one channel took up before. As a consumer you get access to many more channels and services than before at the same time as they are received with perfect picture and audio quality. Additional Information for HDMI • When you connect a HDMI or DVI compatible device make sure of the following: - Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player. - The connected device’s video input is set correctly for this unit. - The connected device is compatible with 720x576p, 1280x720p, 1920x1080i or 1920x1080p video input. • Not all HDCP-compatible HDMI or DVI devices will work with this player. - The picture will not be displayed properly with non-HDCP device. - This player does not playback and TV screen is changed to black screen. Coverage Before buying this product it is anticipated that you have made sure that there are digital transmissions covering your region. Antenna / Signal source Depending on the reception your unit may be connected to a simple indoor antenna or to an existing outdoor antenna system. If you live in a flat you should make sure that the digital terrestrial signals are distributed to your wall antenna outlet. If you have your own antenna system you must make sure that it is equipped with antennas, filter and/or amplifier that can handle those frequencies that the digital channels are transmitted on. Cable-TV Please observe that this unit is not designed for the reception of regular digital cable-TV signals (QAM-signal). Despite this, operators of smaller cable networks may have chosen to distribute the digital terrestrial signals (COFDM-signal) in the network. In this case this unit may well be used. Check with your landlord if you are insecure about what type of TV-signal that is provided in the wall antenna outlet. 15 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 16 SCART connection Tip: Connect one end of the scart cable into the AV1 SCART jack (S) on the unit and other end to the corresponding in jack on your TV. You can get Audio and Video signals together with this connection. When you use COMPONENT VIDEO OUT connection, you can change the resolution for the output. (Refer to “Resolution setting” on page 20-21.) Rear of this unit TV S Component Video Connection Connect the COMPONENT VIDEO OUT jacks (C) on the player to the corresponding input jacks on the TV using Y PB PR cables. Connect the left and right AUDIO OUT jacks (A) of the player to the audio left and right IN jacks on the TV using the audio cables. Rear of this unit C TV 16 A HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 17 Connecting a PAY-TV/Canal Plus Decoder You can watch or record PAY-TV/Canal Plus programmes if you connect a decoder (not supplied) to the unit. Disconnect the unit’s mains lead from the mains when connecting the decoder. You do not need to turn on the unit to view the signals from the connected tuner on your TV. Pictures containing copy protection signals that prohibit any copying cannot be recorded. If you pass the unit signals via the VCR, you may not receive a clear image on your TV screen. Be sure to connect your VCR to the unit and your TV in the order shown below. To watch video tapes, watch the tapes through a second line input on your TV. When you record to a VCR from this unit, do not switch the input source to TV by pressing the TV/DVD button on the remote. If you are using a B Sky B tuner, be sure to connect the tuner’s VCR SCART jack to the AV2 DECODER jack. If you disconnect the unit’s mains lead, you will not be able to view the signals from the connected VCR or tuner. To watch or record PAY-TV/Canal Plus programmes, set [AV2 Connection] option to [Decoder] (see page 28) and set the program’s [CANAL] option to [On] on the Setup menu (page 25). SCART AV If you disconnect the unit’s mains lead, you will not be able to view the signals from the connected decoder. Rear of this unit Connecting to the AV IN 3 Jacks Connecting to the AV2 DECODER jack Connect the input jacks (AV IN 3) on the unit to the audio/video out jacks on your accessory component using audio/video cables. Connect a VCR or similar recording device to the AV2 DECODER jack of this unit. You do not need to turn on the unit to view the signals from the connected tuner on your TV. To watch or record the source from AV2 DECODER jack, set [AV2 Connection] option to [Others] (see page 28) and set [AV2 Recording] option to [Auto], [CVBS], [RGB] or [SVideo] as required (see page 29). Rear of this unit 17 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 18 Connecting to an Amplifier Connecting to an Amplifier via HDMI Output Make one of the following connections, depending on the capabilities of your existing equipment. Connect the unit HDMI OUT jack to the corresponding in jack on your amplifier. Use a HDMI cable (H1). You will need to activate the player’s digital output. (See “[AUDIO] Menu” on page 41.) Note: Since many factors affect the type of audio output, see “The unit’s Audio Output Specifications” on page 19 for details. Connecting to an Amplifier via 2 Channel Audio Output Connect the Left and Right 2CH AUDIO OUT jacks (A) on the player to the audio left and right in jacks on your amplifier, receiver, or stereo system, using audio cables. Rear of this unit H1 Connecting to an Amplifier via Digital Audio Output (Optical or Coaxial) Connect the player’s DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack to the corresponding in jack (OPTICAL O or COAXIAL X) on your amplifier. Use an optional digital (optical O or coaxial X) audio cable. You will need to activate the unit’s digital output. (See “[AUDIO] Menu” on page 41.) Amplifier/Receiver TV H2 Rear of this unit O X Tip: Connect the amplifier’s HDMI output jack to HDMI input jack on your TV using a HDMI cable (H2) if your amplifier has HDMI output jack. A Amplifier/Receiver 18 Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video Receiver that supports one or more of the audio formats supported by your player. Check the receiver manual and the logos on the front of the receiver. (PCM Stereo, PCM Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or DTS-HD) HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 19 Notes: • You must select a digital audio output and a maximum sampling frequency that your Amplifier (or AV receiver) accepts using [SPDIF], [HDMI] and [Sampling Freq.] options on the [Setup] menu (see page 41). • With digital audio connection (SPDIF or HDMI), Disc Menu button sounds of BD-ROM may not be heard if the [SPDIF] or [HDMI] option is set to [Primary Pass-Thru] or [DTS Re-encode]. • If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. • Multi-channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. The unit’s Audio Output Specifications Jack/ Setting Source SPDIF (DIGITAL AUDIO OUT) Analog Output Stereo PCM Stereo DTS Re-encode *3 Primary Pass-Thru *1 Dolby Digital PCM 2ch PCM 2ch DTS Dolby Digital Dolby Digital Plus PCM 2ch PCM 2ch DTS Dolby Digital Dolby TrueHD PCM 2ch PCM 2ch DTS Dolby Digital DTS PCM 2ch PCM 2ch DTS DTS DTS-HD PCM 2ch PCM 2ch DTS DTS Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 5.1ch PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 7.1ch PCM 2ch PCM 2ch DTS PCM 2ch • To see the audio format of the current disc in the on-screen display, press AUDIO. Jack/ Setting Source HDMI OUT PCM Stereo PCM Multi-Ch DTS Re-encode *3 Primary Pass-Thru *1, *2 Dolby Digital PCM 2ch PCM 5.1ch DTS Dolby Digital Dolby Digital Plus PCM 2ch PCM 7.1ch DTS Dolby Digital Plus Dolby TrueHD Dolby TrueHD PCM 2ch PCM 7.1ch DTS DTS PCM 2ch PCM 5.1ch DTS DTS DTS-HD PCM 2ch PCM 5.1ch DTS DTS-HD Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 5.1ch PCM 2ch PCM 5.1ch DTS PCM 5.1ch Linear PCM 7.1ch PCM 2ch PCM 7.1ch DTS PCM 7.1ch Notes: *1 The secondary and interactive audio may not be included in the output bitstream if [SPDIF] or [HDMI] option is set to [Primary Pass-Thru]. (Except LPCM Codec : the output always include interactive and secondary audio.) *2 This player automatically selects the HDMI audio according to the decoding capability of the connected HDMI device even though [HDMI] option is set to [Primary Pass-Thru]. 19 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 20 *3 If the [HDMI] or [SPDIF] option is set to [DTS re-encode], the audio output is limited to 48 kHz and 5.1 Ch. Resolution Setting • The audio is outputted as PCM 48 kHz/16 bit for MP3/WMA file and PCM 44.1kHz/16 bit for Audio CD while playback. The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu or pressing the RESOLUTION button in stop mode. Note: Since several factors affect the resolution of video output, see “Video output according to the Resolution setting” on next page. How to change the resolution using RESOLUTION button Press RESOLUTION repeatedly in stop mode to change the resolution. The display window will show you the current resolution. How to change the resolution using the [Setup] menu 1 Press DISC. 2 Press HOME and the [Home Menu] appears. 3 Select the [Setup] and press ENTER. The [Setup] menu appears. 4 Use v / V to select [DISPLAY] option then press B to move to the second level. 5 Use v / V to select the [Resolution] option then press B to move to the third level. 6 Use v / V to select the desired resolution then press ENTER to confirm your selection. Note: If you select a resolution that your HDMI TV does not accept or select the 1080p resolution with COMPONENT VIDEO OUT connection, the warning message will appear and then ask you to keep the selected resolution setting. If you do not respond to the question for 10 seconds, the resolution will automatically revert back to the previous resolution. 20 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 21 Available resolution according to the resolution setting • When the non-copy protected media is playing back SCART Output HDMI OUT COMPONENT VIDEO OUT Resolution Setting 576i 576i 576i 576p 576p 576p 720p 720p 720p 1080i 1080i 1080i 1080p / 24Hz 1080p / 24Hz 1080p / 50Hz *1, *2 1080p / 50Hz 1080p / 50Hz 1080p / 50Hz *2 • When the copy protected media is playing back SCART Output *2 Even if the resolution is set to 1080p, non-copy protected BDs and DVDs playback are outputted at 1080i resolution. HDMI OUT connection • If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto]. • The 1080p video output frame rate may be automatically set to either 24Hz or 50Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc. COMPONENT VIDEO OUT connection • For the 720p, 1080i, 1080p resolution setting with protected media, real output resolution of COMPONENT VIDEO OUT will be outputted at 576p resolution. • BD or DVD video stream could prevent up-scaling on analog output. HDMI OUT COMPONENT VIDEO OUT 576i 576i 576i 576p 576p 576p 720p 720p 576p 1080i 1080i 576p 1080p / 24Hz 1080p / 24Hz 576p *1 1080p / 50Hz 1080p / 50Hz 576p Resolution Setting SCART OUT connection The resolution of the SCART OUT jack is always outputted at 576i resolution. Notes: • Depending on your display, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press HOME then RESOLUTION repeatedly until the picture re-appear. • This player supports simultaneous output of all video out jacks. The resolution of the HDMI output will not be the same as the resolution output on the component video output. *1 When the 1080p/24Hz video source is outputted via HDMI connection, the SCART OUT and COMPONENT VIDEO OUT will not output any video signal. 21 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 22 Internet connection This player can be connected to a local area network (LAN) via the LAN port on the rear panel. After making the physical connection the player needs to be set up for network communication. This is done from the [Setup] menu — see “[NETWORK] Menu” on page 43 for detailed instructions. • Since there are various connection configurations, please follow the specifications of your telecommunication carrier or internet service provider. Notes: • Depending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP. Connect the player’s LAN port to the corresponding port on your Modem or Router using a LAN cable. Use a commercially available straight LAN cable (Category 5/CAT5 or better with RJ45 connector). • Our company is not responsible for any malfunction of the player and/or the internet connection feature due to communication errors/malfunctions associated with your broadband internet connection, or other connected equipment. By connecting the unit to broadband Internet, you can use software update, BD-Live features and YouTube features. • Our company is not responsible for any trouble in your internet connection. • The features of BD-ROM discs made available through the Internet Connection feature are not created or provided by our company, and our company is not responsible for their functionality or continued availability. Some disc related material available by the Internet Connection may not be compatible with this player. If you have questions about such content, please contact the producer of the disc. Rear of this unit • Some internet contents may require a higher bandwidth connection. • Even if the player is properly connected and configured, some internet contents may not operate properly because of internet congestion, the quality or bandwidth of your internet service, or problems at the provider of the content. Broadband Broadband Service Service • Some internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection. Router Cautions: • When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock. • Do not connect a modular phone cable to the LAN port. 22 • Any fees charged by an ISP including, without limitation, connection charges are your responsibility. • A 10 Base-T or 100 Base-TX LAN port is required for connection to this player. If your internet service does not allow for such a connection, you will not be able to connect the player. • You must use a Router to use xDSL service. HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 23 • A DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or you may be limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this player may not be allowed to connect when a PC is already connected.) Network update notification • The use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly. 1. The update menu will appear on the screen when you turn on the player. • Your ISP may protect this player from being connected to network when confirming MAC ADDRESS. In that case, contact your ISP to request to initialize MAC ADDRESS. If there is a new software is uploaded in the update server, this player let you know that there is a new software update available through via network connection as shown below. Option 1: 2. Use b / B to select a desired option and then press ENTER. [OK] - Starts the software update. (See page 58 for more detail) [Cancel] - Exits the update menu. [Hide] - Exits the update menu and it does not appear until next software is uploaded in the update server. Option 2: If the software update is available from the update server, the “Software Update” icon appears at the bottom of the Home menu. Press blue colored button to start the update procedure. (see page 58 for more detail) Software Update 23 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 24 Notes: Using a USB Flash Drive • This unit supports only USB Flash Drive with FAT16 or FAT32 format. This unit can play the movie, music and photo files contained on the USB Flash Drive. ON REMOTE 1 Inserts a USB Flash Drive to the USB port: – 2 Displays the [Home Menu]: – 3 Selects a main option: [Music], [Photo] or [Movie] option b B, ENTER 4 Selects the [USB] option: bB 5 Displays corresponding menu list: [MOVIE], [MUSIC] or [PHOTO] menu appears. Details for the menu are on pages 50-54. ENTER • The USB Flash Drive can be used for the local storage for enjoying BD-Live discs with Internet • Do not extract the USB Flash Drive during operation (play, etc.). • A USB Flash Drive which requires additional program installation when you have connected it to a computer is not supported. • USB Flash Drive: USB Flash Drive that support USB1.1 and USB2.0. • Movie Files (DivX), Music files (MP3/WMA) and photo files (JPEG/PNG) can be played. For details of operations on each file, refer to relevant pages. • Regular back up is recommended to prevent data loss. Tip: If you select the [Movie], [Photo] or [Music] option when a USB Flash Drive is connected and a disc is inserted simultaneously, the menu for selecting a media will appear. Select a media then press ENTER. • If you use a USB extension cable or USB HUB, the USB Flash Drive may not be recognized. • Some USB Flash Drives may not work with this unit. • Digital camera and mobile phone are not supported. • USB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device. Insert/Remove a USB Flash Drive Inserting a USB Flash Drive – Insert straight-in until it fits into place. Removing a USB Flash Drive – Withdraw the USB Flash Drive carefully. ( PROG. ( ( ( Front of this unit USB Flash Drive 24 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 25 1 Selects the HDD mode: HDD 2 Displays the Home Menu: HOME 3 Selects the [Channel Setup] option: b B, ENTER [Favorite]: Set the program to favorite channel. [Delete]: Delete the selected channel from programmed channel list. [Move]: Change the order of the channels and which numerical button they correspond to. [Block]: Blocks the program. [Station Rename] (Analog channel only): Change the station name. The display for entering characters appears. To enter characters see page 35. Names can be up to 5 characters long. [Program Edit]: (Analog channel only): Change the settings of a channel 4 Selects the [Auto Programming] option: B manually. 5 Move to third level: B Editing a channel (Analog channel only) 6 Choose a country you are using the unit: vV 7 Choose a broadcasting type: Digital, Analog or All BvV You can change the settings of programmed channel by selecting [Program Edit] option on the left side of the channel editing screen. 8 Selects the [Start] and starts channel scan: B, ENTER Auto Channel setting ON REMOTE Auto Channel setting - more you can do Adjust the programmed channels Press HOME, then use b B to select [Channel Setup] option. Press ENTER and the Setup menu appears on the screen. Use B V to select the [Program Edit] on the second level options then press B to move to the third level. Press ENTER while [Edit] option is selected. The channel editing screen appears on the screen. Select which channel you would like to edit and press ENTER. An option menu on the left side of the screen will be highlighted. [PR]: Indicates the selected channel position. [Seek]: Searches for a channel automatically. Searching stops when the unit tunes in a channel. [Ch.]: Changes the channel number. [MFT]: Fine tunes the channel to obtain a clearer picture. [CANAL]: Sets the channels for the decoder. You need this setting to watch or record PAY-TV/Canal plus programs. [NICAM]: Sets the channels for the NICAM broadcast. [PAL/SECAM] Changes TV signal system (PAL or SECAM). [OK]: Confirm the settings and return to the channel list menu. 25 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 26 Switching the program list on the channel editing screen You can switch the program list on the channel editing screen. Selecting an operating mode You must select one of the operating modes before operating. Press HDD or DISC to select the mode between HDD and Disc. Disc: You should select the Disc mode before using playback functions or disc setup setting. HDD: You should select the HDD mode before recording, watching TV channel or using TV setup setting. Using the HDD Home Menu Press v V to move the highlight position to top of the program list. Press b B to select [DIGITAL TV], [ANALOG TV] or [RADIO] then press v V to select a program on the list. 1 Selects the HDD mode: HDD Setting a favorite program 2 Displays the HOME menu: HOME You can set a program to favorite channel. 3 Selects a main option: bB 4 Execute the selected option: ENTER 5 Exit the HOME menu: HOME ON REMOTE Press v V to select a program on the program list then press ENTER to highlight the option menu on the left side of the screen. Press v V to select [Favorite] option then press ENTER. The program is set to the favorite program and [FAV] appears on the TV screen. Using the HDD Home Menu - more you can do Setting the AV1 Decoder Displays the [Title List] menu, which shows recorded titles on HDD. (page 34) Sets the AV1 scart jack for inputting encoded video signals. This option sets the unit to output the encoded signal from AV1 scart jack to AV2 (DECODER) scart jack for decoding. The decoded signal is then input back through the AV2 (DECODER) jack so you can record or watch PAYTV/Canal Plus programs. Press AV once while the channel editing screen appears. The [Decoder On/Off] option on the option menu. Press ENTER to turn on the option and press ENTER again to turn off. The [Canal+] appears on the screen when this option is turned on. 26 Title List Timer Record List Displays [Timer Record] menu. (page 32) Channel Setup Displays [Channel Setup] menu. (page 27) Setup (Disc mode) Displays [Setup] option in the Disc Setup Menu. (page 39) HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 27 Adjust the Channel setup settings ON REMOTE 1 Displays the HOME menu: HOME 2 Selects the [Channel Setup] option: b B, ENTER 3 Selects the setup option: B 4 Selects a desired option on the first level: vV 5 Move to second level: B Adjust the Channel setup settings - more you can do Adjust the general settings 6 Selects a desired option on the second level: v V B 7 Move to third level: 8 Adjust or confirm the setting: v V, ENTER 9 Go back to the previous level: b Auto Programming – This option automatically scans and sets the available channels. Password is needed to access this option, if [Lock System] option is set to [On]. (page 29) [Country]: Select a country where you operate this unit. If the country that you want to set is not listed, select [Others]. [All, Digital or Analog]: Select a broadcasting type which you want to scan automatically. [Start]: Start the channel scanning. Program Edit– This option allows you to add channels and edit preset channels. Password is needed to access this option, if [Lock System] option is set to [On]. (page 29) First level [Add Channel]: Select the broadcasting type between [Digital] and [Analog] and then press v V to select the channel and press ENTER to add the selected channel. [Edit]: Displays the screen which show preset channel list and channel editing options. (page 25) Second level Third level Clock Set– The clock must be set in order to use [Timer record]. [Auto]: Set the channel that broadcasts a clock signal and the clock will be set automatically. If the clock that has automatically set is different with your local clock, you can add more time using [Time Offset] option. (For example, when summer time is started in local area.) Press B to select [Time Offset] option. Press v V to select a value then press ENTER (0, 30, 60, 90, 120). Select “0” if the clock that has automatically set is identified with your local clock. [Manual]: If there is no channel that broadcasts a clock signal in your area, you can set the time and date manually. 27 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 28 AV2 Connection – You can connect a decoder or the other device to the AV2(DECODER) jack on the rear panel. Adjust the language settings [Decoder]: Select this when you connect a PAY-TV or Canal Plus decoder to the AV2(DECODER) jack on the unit. [Others]: Select this when you connect a VCR or similar recording device to the AV2(DECODER) jack on the unit. Power Save mode – Selects whether this unit is in power save mode when the power is turned off. This option is not available when a timer recording is set. [ON]*1: The front panel display is off and only signals arriving at the antenna input are passed through when the unit is turned off. [OFF]: Turns off the [Power Save Mode]. *1 If you turns off the unit while receiving encoded signals, the power save mode does not work Antenna Feed 5V – If you are using an indoor antenna, use one with a signal amplifier rated at DC 5V, 100mA and set this option to [ON]. [ON]: Power is supplied to the connected antenna. [OFF]: The unit does not supply power to the connected antenna. Initialization – You can reset the unit to its original factory settings and format the HDD. DTV Audio – Digital channels sometimes provide multiple audio tracks, often in a different language. You can set a default audio language with this setting. If provided by the broadcaster, you can also select a different audio language while viewing TV by pressing AUDIO repeatedly. DTV Subtitle – Digital channels sometimes provide subtitle, often in a different language. You can set a default subtitle language with this setting, if DTV subtitle is provided by the broadcaster. Press SUBTITLE repeatedly to select a subtitle language while viewing digital TV viewing. Adjust the audio settings [Factory Set]: You can reset the unit to all its factory settings. Some options cannot be reset (Rating, Password, and Area Code). The auto setup menu appears on the screen after the factory settings. [HDD format]: Everything recorded on the HDD will be erased. Dolby Digital – Selects the type of digital audio signal when using the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack. [Bitstream] – Select this when you connect this unit’s DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack to an audio component with a built-in Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG) – Select this when you connect this unit’s DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack to an audio component without a built-in Dolby Digital or MPEG decoder. 28 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 29 Adjust the lock settings To access the Lock System or DTV Rating, you must enter the 4-digit password. If a password is not set on this unit, you must set the password in the Disc Setup settings (page 42). If not, Lock System and DTV Rating are not activated. If you do not remember your password, refer to the "If you forget your password" on page 42. Lock System – Allows you to set up specific programs and ratings through blocking schemes. Also allows you to activate or disable all of the lock schemes previously set up. A password is required to gain access to the lock menu options. When the Lock System is set to [OFF], the [DTV Rating] is not effective. DTV Rating – You can set the rating to block out all the programs with rating above a specified level. [No Control]: You can view all programs. [04 Years] – [18 Years]: Rating [04 Years] has the most restrictions and [18 Years] is the least restrictive. [Lock All]: All programs are locked. To view a program, you must input the 4-digit password you have created. Adjust the recording settings Rec Mode Set – Select the picture quality for recording from XP, SP, LP, EP or MLP. See recording time of each mode on page 66. [XP]: Highest picture quality. [SP]: Standard picture quality. [LP]: Slightly lower picture quality than [SP] mode. [EP]: Low picture quality. [MLP]: The longest recording time with the lowest picture quality. Rec Aspect – This option sets the recording aspect ratio to suit the material you are recording on HDD. TV Rec Audio – Select an audio channel to record when recording a bilingual program. [Main+Sub]: Main language and sub language [Main]: Main language only [Sub]: Sub language only AV2 Recording – Selects a method of inputting video signals for the AV2(DECODER) jack. The picture will not be clear if this setting does not match the type of the video input signal. [Auto]: The video input signal will automatically follow the video signal received. [CVBS]: Inputs CVBS(composite) video signals. [RGB]: Inputs RGB signals. [S-VIDEO]: Inputs S-Video signals. Time Shift – Set this option to [ON] make this unit to use the Time Shift function automatically without pressing TIME SHIFT button. The timeshift will start in 5-10 seconds after TV tuner mode is started. 29 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 30 Switching the EPG menu Using the digital EPG ON REMOTE 1 Selects the HDD mode: HDD 2 Displays the EPG menu: EPG 3 Selects s a TV program: vV 4 Displays the next/previous menu list: .> 5 Shows the selected program currently on air: ENTER 6 Exit the EPG menu: EPG or RETURN The EPG screen provides two search menus. Press yellow color button when the EPG menu is displayed. Now/Next: The screen shows now and next programs. Using the digital EPG - more you can do About the digital EPG The digital EPG shows a table of scheduled digital TV programs and detailed information about individual program. The digital EPG screen consist of program information, channel list and general program list. Note that the unit’s clock must be set to the correct time and date to ensure all relevant EPG information is displayed. 8 Days: The screen shows programs within 8 days. When the EPG menu with 8 days is displayed, you can also change the date of the EPG menu by pressing the green color button then use b / B to select a date. Displaying the detailed Information window You can view detailed information for the highlighted program. Press blue color button to display detailed information window. To exit the detail information window, press blue color button again. You can set a timer record using EPG menu with 8 days. Select a program then press red color button. The red timer icon will be displayed and the program will be memorized by the unit. You can check the programming on the [Timer Record List] menu (see page 32). To cancel the timer recording, select the program then press red color button. The red timer icon disappears. 30 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 31 Viewing a Teletext service Teletext is a free broadcasting service by some TV stations which gives up-to-the-minute information on news, weather, television programs, share prices and many other topics. The unit gives you access to teletext which is greatly improved in various aspects such as text and graphics. This teletext can be accessed by special teletext services and specific services which broadcast teletext. Use numbered (0-9) buttons on the remote control to change the program which broadcast teletext. Press TEXT to access on the teletext. Follow the indications on teletext and move onto the next or previous step by pressing color (RED or GREEN) or SKIP (. / >) buttons. Press TEXT or RETURN (O) to turn the teletext off and return to TV viewing. Selecting teletext page Enter the desired page number as a three digit number with the numbered buttons. If during selection you press a wrong number, you must complete the three digit number and then enter the correct page number again. Use RED/GREEN buttons to move up and down pages. 31 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 32 Setting a timer record Recording Follow the instruction below to record a TV channel or other source. The recording continues until the media is full, you stop the recording or the progress of recording is more than 12 hours. This unit can be programmed to record up to 16 timer recordings within a month. The clock must be set correctly before setting a timer. ON REMOTE 1 Selects the HDD mode: HDD 2 Selects a recording mode: You can select a recording mode on the HDD Setup settings menu. (XP, SP, LP, EP or MLP) HOME, v V b B, ENTER 3 Selects a channel or source you want to record: PR- / PR +, AV 4 Starts recording: REC (z) 5 Stops recording: x) STOP (x Recording - more you can do Changing TV audio channel Before recording, you can change the TV audio channel for stereo and bilingual broadcast. Press AUDIO repeatedly to change the audio channel. The current audio channel is displayed on-screen. Set the [TV Rec Audio] option in the SETUP menu when recoding a bilingual broadcast. Instant timer recording Instant timer recording allow you to make a recording of preset length easily. When the REC (z) is first pressed, recording starts. Press REC (z) repeatedly to select a certain amount of time. Each press of REC (z) to displays the increased recording time on-screen. You can set the instant timer recording up to 240 minutes on HDD. Note: The unit will automatically power off when the Instant Timer Recording ends in HDD mode. 32 Press HOME and select Home Menu option. Press b B to select the [Timer Record List] and press ENTER to display [Timer record List] menu. Use v V to select [New] and press ENTER to display [Timer Record] menu. Adjust the each field as described below using v V b B. [CH]: Choose a memorized program number, or one of the external inputs from which to record. (You cannot select DV input and radio channel.) [Date]: Choose a date up to 1 month in advance. [Start Time]: Set the start time. [End Time]: Set the end time. [Repeat]: Choose a desired repeat (Once, Daily (Mon-Fri), or Weekly). Recordings from EPG menu will always be set to [Once]. Press REC (z) repeatedly to set the recording mode (XP, SP, LP, EP or MLP) then press ENTER to set a timer recording. The “Rec OK” on the [Check] field on the [Timer Record List] menu indicates the timer recording is programmed correctly. HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 33 Canceling a timer recording Using time shift function You can cancel a timer record before the timer recording actually starts. Select a timer recording that you want to cancel on the [Timer Record List] menu and press CLEAR. This feature allows you to pause or rewind live TV, so you do not miss a thing if you were interrupted. Press TIME SHIFT then press PAUSE (X) while watching live broadcast before answering the phone. The timeshift function will record the broadcast of later viewing. Before using this function, make sure that the unit is in HDD mode. Timer Recording Troubleshooting Even though the timer is set, the unit will not record when: – There is no free space on the HDD. – A non-recordable is not free space on the HDD. – The unit is under operating (recording, deleting etc.). – There are already 255 titles recorded on the HDD. You cannot enter a timer program when: – A recording is already underway. – The time you’re trying to set has already passed. – There are already 16 timer programs set. If two or more timer programs overlap: – The earlier program takes priority. – When the earlier program finishes, the later program starts. – If two programs are set to start at exactly the same time, the program entered first takes priority. Time Slip You can watch the title that you are currently recording to HDD with this function. After the recording is progressed over 15 seconds, press PLAY (B) to playback the title that you are currently recoding. If you stop playback the title, returns to the current recording position. If you want to stop recording without stopping the current playback, press and hold STOP (x) more than two seconds. Recording From an external inputs You can record from an external component, such as a camcorder or VCR, connected to any of the unit external inputs. Each press of the AV changes the input source as described below. Make sure that the component you want to record from is connected properly to the unit before recording an external source. Tuner: Built-in tuner AV1: AV1 scart jack mounted on back panel AV2: AV2 DECODER scart jack mounted on back panel AV3: AV IN 3 (VIDEO, AUDIO (L/R)) mounted on the front panel If no button is pressed for 6 hours, the timeshift will stop automatically. You can use trick play functions (slow, scan, etc.) during timeshift. Refer to playback operation on page 41-43. Stop timeshift by pressing STOP (x) and confirm by pressing ENTER. You will returned to watch a broadcast in real time. Jump to start or end during timeshift Press ENTER to show progress bar during timeshift. Press b to jump to the beginning and B to jump to the end of the timeshift. Clip recording If you want to record a timeshifted program as a title, press REC (z) at the starting point and ending point you want to record. The timeshift progress bar indicates a clip that you select with red bar. You can make more clips by repeating this instruction. The clips will be recorded when you exit the timeshift function. Using time shift function automatically If the [Time Shift] option in the Channel Setup menu is set to [ON], timeshift starts automatically without pressing TIME SHIFT button in HDD mode. If you want to quit the timeshift function, set the [Time Shift] function to [OFF]. 33 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 34 Adding chapter markers HDD Editing a title Using the Title list menu,you can edit video contents. ON REMOTE You can create chapters within a title by inserting chapter marks at the desired point. Press MARKER at the desired point while playback. A chapter marker icon appears on the screen. 1 Selects the HDD mode HDD 2 Displays a [Title List] menu: MENU/LIST 3 Selects a title you want to edit: vVbB 4 Displays an editing menu: The options are differ depending on the media type. ENTER Use this function to merge the selected chapter with adjacent chapter. Select a chapter and press ENTER. Select [Combine] option to view combine indicator between chapter thumbnails. Press ENTER to combine indicated two chapters. 5 Selects a menu option: v V b B, ENTER This function is not available in conditions as listed below. There is only one chapter within the title. The first chapter is selected. 6 Exit the [Title List] menu: RETURN Chapter search HDD You can select the start of a title by searching a chapter. Select a title that you want to search and press ENTER. Select [Chapter] in the [Search] option from the menu on the left of the screen, and press ENTER to display the [Chapter List] menu. Editing a title - more you can do About title list menu Press MENU/LIST to display the Title List menu. Playback should be stopped when you do this. You can also access it using HOME menu, select [Title List] option and press ENTER. a b Combining chapters HDD d e Use v V b B to find the chapter you want to start playback, and press PLAY to start playback. Time search HDD You can select the start of a title by searching through the time duration. Select a title that you want to search and press ENTER. Select [Time] in the [Search] option from the menu on the left of the screen and press ENTER to display the [Search] menu. f c a Current media b Indicates the record mode, free space, and elapsed time progress bar. c Menu options: To display menu option, select a title or chapter then press ENTER. d Currently selected title. e Thumbnail f Shows the title name, recorded date, and recording length. 34 Use b B to find the time you want to start. Each press of b B to move 1 minute and press and hold b B to move 5 minutes. Press ENTER to watch a title from a selected time. HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 35 Sorting the titles HDD Naming a title HDD Press ENTER to bring up the option menu. Select [Sort] option and press ENTER to view the further options. Here you can choose to sort titles according to [Date] (when they were recorded), [Title] (alphabetical order) or by [Category] (sort by genre). When a title is recorded by this unit, the title name will be named by a number or a program title. You can change a title name by using this function. Combining titles HDD Use this function to merge the selected title with another title. Select a title and press ENTER. Select [Combine] in the [Edit] option then press ENTER. Select a title you want to combine with current title and press ENTER to confirm. Dividing a title HDD Use this function to split a title up into two titles. Select a title that you want to divide and press ENTER. Select [Divide] in the [Edit] option from the menu on the left of the screen and press ENTER to display the [Divide] menu. Find the point you want to divide a title using PLAY (B), SCAN (m / M), PAUSE (X) buttons and press ENTER while [Divide] option is selected. The playback screen shows the divided point. Select [Done] option and press ENTER to divide. You cannot select dividing point less than 3 seconds. Deleting a part HDD You can delete a part which you do not want in the title. Select a title that you want to delete part and press ENTER. Select [Delete Part] in the [Edit] option from the menu on the left of the screen and press ENTER to display the [Delete part] menu. You can find the point using PLAY (B), SCAN (m / M), PAUSE (X) buttons. [Start Point]: Select starting point of a part that you want to delete then press ENTER. [End Point]: Select ending point of a part that you want to delete then press ENTER. [Next Part]: Press ENTER to delete the additional part. [Cancel]: Press ENTER to cancel the selected part. [Done]: Press ENTER to delete the selected part. Select a title that you want to change a name and press ENTER. Select [Rename] or [Title Name] option from the menu on the left of the screen and press ENTER to display the keyboard menu. Use v V b B to select a character then press ENTER to confirm your selection on the keyboard menu. [OK]: Finish the naming. [Cancel]: Cancels all entered characters. [Space]: Inserts a space at the cursor position. [Delete]: Deletes the previous character at the cursor position. You can use remote control buttons for entering a name PLAY (B): Inserts a space at the cursor position. PAUSE (X): Deletes the after character at the cursor position. STOP (x), CLEAR: Deletes the previous character at the cursor position. . / >: Moves cursor to left or right. MENU/LIST, DISPLAY: Changes the character set on the keyboard menu. Numbers (0-9): Enters the corresponding character at the cursor position. You can apply a genre for a selected title on HDD. When a character is highlighted on the keyboard menu, keep pressing b until the curser jumps across to the Genre field. Choose desired genre and press ENTER to select it. The chosen genre name will appear at the lower right corner of the title thumbnail. 35 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 36 Moving to another title HDD Displaying HDD information ON REMOTE 1 Starts playback: B) PLAY (B When HDD has more than one title, you can move to another title. Press DISPLAY twice during playback then use v / V to select the title icon. Then, press the appropriate numbered button (0-9) or b / B to select a title number. 2 Displays current status of playback: DISPLAY 3 Displays the playback menu: DISPLAY Starting playback from selected time HDD 4 Selects an item: vV Press DISPLAY twice during playback. The time search box shows the elapsed playing time. Select the time search box and then input the required start time in hours, minutes, and seconds from left to right. For example, to find a scene at 2 hours, 10 minutes, and 20 seconds, enter “21020” and press ENTER. If you enter the wrong numbers, press b / B to move the under bar (_) to the wrong number. Then enter the correct numbers. 5 Adjust the playback menu settings: bB 6 Exit the disc playback menu: DISPLAY Displaying HDD Information - more you can do Adjusting playback menu item You can select an item by pressing vV and change or select the setting by pressing b B. a b c d e a b c d e 36 Current title/Total number of titles Current chapter / total number of chapters Elapsed playing time Selected audio language or audio channel Selected subtitle HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 37 Displaying information while watching TV Changing TV program During viewing the TV, Press DISPLAY to display the information displayed on-screen. Use PR- / PR+ or v / V on the remote control to change the programs in memory or use numbered (0-9) buttons to select a program directly. e a b c d a Indicates channel number, station name, and audio signal (Stereo, Bilingual, Mono) received by the tuner. (The audio signal indication is available only for the analog channels.) b Indicates media name. c Indicates the record mode, free space, and elapsed time progress bar. d Indicates current date and time. e Indicates program title, start time, end time, etc. (Extended Text Message Icon): Indicates that there is an Extended Text Message available to provide detailed descriptions of the program (see page 30). (DTV Subtitle Icon): Indicates that the current program contains the subtitle. (TV Aspect): Indicates that the current channel is wide or 4:3 picture format. (Teletext Icon): Indicates that there is a Teletext available (see page 31). Changing TV program with program list You can display TV program list using the ENTER button and switch into other TV program on the channel list. While watching a program, press ENTER or PR LIST to display the TV program list. Select your desired channel using the v / V and press ENTER to change the TV program. Switching the program list You can switch the program list to DIGITAL TV, ANALOG TV or RADIO. Press v to move the highlight position to top of the program list. Press b B to select a [DIGITAL TV], [ANALOG TV], or [RADIO]. Selected program list appears. Displaying the favorite program list You can display favorite channel list that organized by your private taste. To set a favorite program, use [Program Edit] option in the Setup menu. (page 25.) Press FAV button while watching a TV. The favorite options appears. Press v V to select a desired program then press ENTER to watch the selected program. 37 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 38 Playing a HDD Using the Disc Home Menu ON REMOTE ON REMOTE 1 Selects the HDD mode: HDD 1 Displays the [Home Menu]: 2 Displays the [Title List] menu: MENU/LIST 2 Selects an option: bB 3 Selects a title you want to edit: vVbB 3 Displays the selected option menu: ENTER 4 Exit the [Home Menu]: HOME 4 Displays an editing menu: ENTER The options are differ depending on the media type. 5 Starts playback: B) PLAY (B 6 Stops playback: x) STOP (x DISC Playing a HDD - more you can do Skip to the next/previous chapter/track HDD Press SKIP (>) to move to the next chapter. Press SKIP (.) to return to the beginning of the current chapter. Press SKIP (.) twice briefly to step back to the previous chapter. [Movie] – Start video media’s playback or displays the [MOVIE] menu. Pause a playback [YouTube] – Watch YouTube videos streamed from the Youtube server via the internet to your TV. (page 55-57) Press PAUSE (X) to pause playback. Press PLAY (B) to continue playback. [Photo] – Displays [PHOTO] menu. (page 53-54) Frame-by-Frame playback HDD [Music] – Displays [MUSIC ]menu. (page 52-53) Press PAUSE (X) repeatedly to play Frame-by-Frame playback. You can advance or back up the picture frame-by-frame by pressing b / B repeatedly during PAUSE mode. Fast forward or fast reverse HDD Press m or M to play fast forward or fast reverse during playback. You can change the various playback speed by pressing m or M repeatedly. Press PLAY (B) to continue play at normal speed. Hearing a different audio HDD Press AUDIO then press b or B repeatedly to hear a different audio language, audio track or encoding method. Slow down the playing speed HDD While playback is paused, press bb or BB to slow down forward or reverse playback. You can change the various playback speed by pressing m or M repeatedly. Press PLAY (B) to continue play at normal speed. 38 [Setup] – Displays the [Setup] menu. (page 39-44) Tips: • If you select the [Movie], [Photo] or [Music] option when a USB Flash Drive is connected or a disc is inserted simultaneously, the menu for selecting a media will activate. Select the media then press ENTER. • If “Software Update” appears on the [Home Menu], it means there is a software update available via network. To update the unit, press blue button. For details, see page 58. Note: The unit will be in stop mode then the [Home Menu] will appear if you press HOME during playback. HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 39 [DISPLAY] Menu Adjust the Disc Setup settings ON REMOTE 1 Displays the [Home Menu]: DISC 2 Selects the [Setup] option: b B, ENTER 3 Selects a desired option on the first level: vV 4 Move to second level: B 5 Selects a desired option on the second level: v V 6 Move to third level: B 7 Adjust or confirm the setting: v V, ENTER 8 Go back to the previous level: b 9 Exit the [Setup] menu: HOME TV Aspect Ratio [4:3 Letter Box] – Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. [4:3 Pan Scan] – Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off. [16:9 Original] – Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides. [16:9 Wide] – Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen. First level Resolution Sets the output resolution of the Component and HDMI video signal. Refer to “Resolution Setting” on page 20-21 for details about the resolution. Second level Third level [Auto] – If the HDMI OUT jack is connected for TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. If the COMPONENT VIDEO OUT is only connected, this changes the resolution to 1080i as default resolution. [1080p] – Outputs 1080 lines of progressive video. [1080i] – Outputs 1080 lines of interlaced video. [720p] – Outputs 720 lines of progressive video. [576p] – Outputs 576 lines progressive video. [576i] – Outputs 576 lines of interlaced video. 39 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 40 1080p Display Mode [LANGUAGE] Menu When the resolution is set to 1080p, select [24Hz] for smooth presentation of film material (1080/24p) with a HDMI-equipped display compatible with 1080/24p input. Notes: • When you select [24Hz], you may experience some picture disturbance when the video switches video and film material. In this case, select [50Hz]. • Even when [1080p Display Mode] is set to [24Hz], if your TV is not compatible with 1080/24p, the actual frame frequency of the video output will be 50Hz or 60Hz to match the video source format. • When the 1080p/24Hz video source is outputted via HDMI connection, the SCART OUT and COMPONENT VIDEO OUT will not output any video signal. Display Menu Select a language for the [Setup] menu and on-screen display. Disc Menu / Disc Audio / Disc Subtitle HDMI Color Setting Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. [YCbCr] – Select when connecting to a HDMI display device. [RGB] – Select when connecting to a RGB display device. Note: When you connect the HDMI OUT jack to DVI display device, the [HDMI Color Setting] will automatically switch to [RGB]. Analog Output Select an option according to the TV connection type. [YPbPr] – When your TV is connected to the COMPONENT OUT jacks on the unit. [RGB] – When your TV is connected to the SCART (RGB signal) jack on the unit. Notes: • HDMI cable is connected, the menu screen is disabled. • When Analog output is set to RGB, press RESOLUTION to change the set to YPbPr. 40 Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] – Refers to the original language in which the disc was recorded. [Other] – Press ENTER to select another language. Use number buttons then ENTER to enter the corresponding 4-digit number according to the language code list on page 62. [Off] (for Disc Subtitle) – Turn off Subtitle. Note: Depending on the disc, your language setting may not work for some discs. HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 41 [AUDIO] Menu Note: Each disc has a variety of audio output options. Set the player’s Audio options according to the type of audio system you use. When [HDMI] option is set to [PCM Multi-Ch], the audio may output as PCM Stereo if the PCM Multi-Ch information is not detected from HDMI device with EDID. Note: Since many factors affect the type of audio output, see “The unit’s Audio Output Specifications” on page 19-20 for details. Sampling Freq. (Only for SPDIF audio) [192KHz] – Select this if your A/V Receiver or Amplifier is capable of handling 192 KHz signals. [96KHz] – Select this if your A/V Receiver or Amplifier is NOT capable of handling 192 KHz signals. When this choice is made, this unit automatically converts any 192 KHz signals to 96 KHz so your system can decode them. HDMI / SPDIF (Digital Audio Output) Select the output sound format when a device equipped with a HDMI or Digital Audio input jack is connected to the HDMI OUT or DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack on this player. [PCM Stereo] – Select if you connect this unit’s HDMI OUT or DIGITAL AUDIO OUT jack to a device with two-channel digital stereo decoder. [PCM Multi-Ch] (HDMI only) – Select if you connect this unit’s HDMI OUT jack to a device with multi-channel digital decoder. [48KHz] – Select this if your A/V Receiver or Amplifier is NOT capable of handling 192 KHz and 96 KHz signal. When this choice is made, this unit automatically converts any 192 KHz and 96 KHz signals to 48 KHz so your system can decode them. Check the documentation for your A/V Receiver or Amplifier to verify its capabilities. DRC (Dynamic Range Control) When a disc encoded in Dolby Digital or Dolby Digital Plus is playing back, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. Set DRC to [On] for this effect. [DTS Re-Encode] – Select if you connect this unit’s HDMI OUT or DIGITAL AUDIO OUT jack to a device with DTS decoder. [Primary Pass-Thru] – Select if you connect this unit’s DIGITAL AUDIO OUT (OPTICAL or COAXIAL) and HDMI OUT jack to a device with LPCM, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD decoder. 41 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 42 [LOCK] Menu (Parental Control) If you forget your password The [LOCK] settings affect only BD and DVD playback. If you forget your password, you can clear it using the following steps: 1 Remove any disc that might be in the player. 2 Select [LOCK] option in the [Setup] menu. 3 Use Number buttons to enter “210499”. The password is cleared. Rating Blocks playback of rated disc based on their content. (Not all discs are rated.) To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created. If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password and press ENTER. Enter it again and press ENTER to verify. Password You can create, change or delete the password. [New] – Enter a 4-digit password and press ENTER. Enter it again and press ENTER to create a new password. [Change] – Enter the current password and press ENTER. Enter a 4-digit password and press ENTER. Enter it again and press ENTER to create a new password. [Delete] – Enter the 4-digit password and press ENTER to delete the password. Tip: If you make a mistake before pressing ENTER, press b to delete a number one by one. 42 [Rating 1-8] – Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. [Unlock] – If you select unlock, parental control is not active and the disc plays in full. BD Age Set an age limit of BD-ROM play. Use number buttons to input an age limit for BD-ROM viewing.  – All BD-ROM can be played. [0-254] – Prohibits play of BD-ROM with corresponding ratings recorded on them. Area Code Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 62. HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 43 [NETWORK] Menu The [NETWORK] settings are needed to use the software update, BD Live and YouTube features. Some BD-ROM discs may enable you to access special BD-ROM sites, if you connect the player to the Internet. For example, if a BD-ROM site includes content such as links to future movie trailers, you can watch the downloaded on-line content on the player. You do not need to connect to a PC to use this function. Preparations: • This feature requires an always-on broadband internet connection. (see page 22-23.) • A BD-ROM disc compatible with this feature is required. Not all BDROM discs are compatible. How to check the network configuration Select [IP Mode] option and check the Network status indicator shown above the menu. (The Network status indicator changes according to Network configuration.) Able to use network Testing Network Unable to use network IP Setting This option is available only if [IP Mode] option is set to [Static IP]. Use the v / V / b / B buttons to select a field; use the number buttons to enter a value. Press ENTER when [OK] is highlighted to finish and exit the screen. BD-LIVE connection You can restrict Internet access when BD-Live functions are used. [Permitted] – Internet access is permitted for all BD-Live contents. IP Mode If there is a DHCP server on the local area network (LAN), this player will automatically be allocated an IP address. If you’re using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function, select [Dynamic IP]. The IP address will automatically be determined. If there is no DHCP server on the network and you want to set the IP address manually, select [Static IP] then set the [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using [IP Setting] option. [Partially permitted] – Internet access is permitted only for BD-Live contents which have content owner certificates. Internet access and AACS Online functions are prohibited for all BD-Live contents without a certificate. [Prohibited] – Internet access is prohibited for all BD-Live contents. 43 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 44 [OTHERS] Menu Software Update You can update the software by connecting the unit directly to the software update server (see page 58). DivX Registration Code Skin Changes the background of the initial screen. Java Font Size BD You can adjust the default text size displayed for the BD-J contents during BD-ROM playback. This setting is only valid when BD-J contents do not set the size of text. Please select a font size bigger than 24 when the player is connected with a HD TV. DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified or DivX Ultra Certified device that plays DivX video. This DivX® Certified device must be registered in order to play DivX Videoon-Demand (VOD) content. First generate the DivX VOD registration code for your device and submit it during the registration process. [Important: DivX VOD content is protected by a DivX DRM (Digital Rights Management) system that restricts playback to registered DivX Certified devices. If you try to play DivX VOD content not authorized for your device, the message “Authorization Error” will be displayed and your content will not play.] Learn more at www.divx.com/vod. Press ENTER or B when [DivX Reg. Code] is highlighted and you can view the registration code of the unit. Note: All the downloaded videos from DivX® VOD can only be played back on this unit. Initialize Disclaimer Notice You can reset the player to its original factory settings or initialize the BD storage. Press ENTER or B to view the notice of Network Service Disclaimer on page 67. [Factory Set] – If you need to, you can reset the player to all its factory settings. Some options cannot be reset. (Rating, Password and Area Code, etc.) [BD Storage Clear] – Initializes the BD contents from the connected USB Flash Drive. 44 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 45 Resume playback Play a disc ON REMOTE 1 Open the disc tray: Z) OPEN/CLOSE (Z 2 Inserts a disc: - 3 Close the disc tray: Z) OPEN/CLOSE (Z 4 Adjust the disc menu settings: A disc menu may not appear on the screen depending on the disc. v V b B, ENTER 5 Starts playback: B) PLAY (B 6 Stops playback: x) STOP (x Notes: • • When you turn on the player or replace a disc, the player returns to the initial default setting. Depending on the disc, a specific type of audio that the disc has is output. Depending on the pre-recorded contents of the BD-ROM, some functions may not be available or may be operated differently than other media. If a disc menu screen is displayed BD DVD AVCHD DivX The menu screen may be displayed first after loading a disc which contains a menu. Use b / B / v / V buttons to select the title/chapter you want to view, then press ENTER to start playback. BD DVD AVCHD DivX During playback, press STOP (x) to stop playback. The unit records the stopped point, depending on the disc. “Xx” appears on the screen briefly. Press PLAY (B) to resume playback (from the scene point). If you press STOP (x) again or unload the disc (“x” appears on the screen.), the unit will clear the stopped point. (Xx = Resume Stop, x = Complete Stop) Notes: • The resume point may be cleared when a button is pressed (for example; POWER, OPEN/CLOSE, etc). • On BD-Video discs including BD-J, the resume play function does not work. • On BD-ROM interactive title, the unit will be in Complete Stop mode if you press STOP (x) once during playback. Pause a playback ALL During playback, press PAUSE (X) to pause playback. Press PLAY (B) to continue playback. Tip: During Audio CD or MP3/WMA playback, press X once again to resume playback. Frame-by-Frame playback BD DVD AVCHD DivX Press PAUSE (X) repeatedly to play Frame-by-Frame playback. Slow down the playing speed BD DVD AVCHD DivX Skip to the next/previous chapter/track/file ALL While the playback is paused, press SCAN (M) repeatedly to play in slow motion (4 steps, forward only). During playback, press . or > to go to the next chapter/track/file or to return to the beginning of the current chapter/track/file. Press . twice briefly to step back to the previous chapter/track/file. Fast forward or fast reverse ALL Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the various playback speeds by pressing SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal speed. 45 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 46 Playing repeatedly ALL Using the search menu During playback, press REPEAT repeatedly to select a desired repeat mode. The current title, chapter or track will be played back repeatedly. To return to normal playback, press REPEAT repeatedly to select [Off]. During playback, press SEARCH to display the search menu. Press b / B to skip the playback 15 seconds forward or backward. Note: If you press > once during Repeat Chapter/Track playback, the repeat playback cancels. BD DVD AVCHD DivX Press REPEAT to select [A-] at the beginning of the portion you wish to repeat and press ENTER at the end of the portion. Your selected portion will be repeated continually. You cannot select a portion less than 3 seconds. To return to normal playback, press REPEAT repeatedly to select [OFF]. AVCHD DivX During playback or pause mode, press ZOOM to display the [Zoom] menu. Use b / B to select zoom mode (16 steps). Press RETURN to exit the [Zoom] menu. To return to the normal picture size, select [Off] on the [ZOOM] menu. Note: This function may not work on some disc or titles. Viewing the Title menu or Popup menu BD DVD Press TITLE/POPUP to displays the title menu or popup menu. If the current DVD or BD-ROM disc has a menu, the Title menu or Popup menu appears on the screen. Depending on the disc, the menu may not be available. 46 AVCHD DivX BD DVD AVCHD DivX To enter a Marker ACD Enlarge the playback image DVD DVD Tip: You can select a point that you want to skip by pressing and holding b / B button. Marker Search Repeating a specific portion (A-B) BD You can start playback from up to nine memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up to nine markers. To Recall or Clear a Marked Scene Press SEARCH and the search menu appears on the screen. Press a number button to select a marker number that you want to recall. Playback starts from the marked scene. OR Press V to highlight a marker number. Use b / B to select a marked scene that you want to recall or clear. Press ENTER and playback starts from the marked scene. Press CLEAR and the marked scene is erased from the search menu. Notes: • This function may not work on some disc or titles. • All marked points are cleared if you press STOP (x) twice (complete stop), the title is changed or if you unload the disc. • If the total length of the title is less than 10 seconds, this function is not available. HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 47 Selecting a subtitle language BD DVD AVCHD Last Scene Memory DivX During playback, press SUBTITLE to switch the subtitle on or off and press SUBTITLE repeatedly to select a desired subtitle language. OR During playback, press DISPLAY to display the playback menu. Use v V to select the [Subtitle] option then use b B to select desired subtitle language. Note: Some discs allow you to change subtitle selections only via the disc menu. If this is the case, press TITLE/POPUP or MENU/LIST button and choose the appropriate subtitle from the selections on the disc menu. DVD AVCHD DVD Notes: • Settings are stored in memory for use any time. • This unit does not memorize settings of a disc if you switch off the unit before commencing to play it. • Last Scene Memory function for a previous disc is erased once a different disc is played. • This function may not work depending on the disc. Screen Saver Hearing a different audio BD BD This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the unit or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled. The screen saver appears when you leave the player in Stop mode for about five minutes. DivX During playback, press AUDIO repeatedly to hear a different audio language, audio track or audio channel. OR During playback, press DISPLAY to display the playback menu. Use v V to select the [Audio] option then use b B to select desired audio language, audio track or audio channel. Notes: • Some discs allow you to change audio selections only via the disc menu. If this is the case, press TITLE/POPUP or MENU/LIST button and choose the appropriate audio from the selections on the disc menu. • Immediately after you have switched sound, there may be a temporary discrepancy between the display and actual sound. • On BD-ROM disc, the multi audio format (5.1CH or 7.1CH) is displayed with [MultiCH] in the on-screen display. Using coloured (A, B, C, D) Buttons BD These buttons are available only during BD-J contents playback. Use the appropriate buttons as indicated by the display. Depending on the disc contents, the functions of each button may differ. 47 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 48 Moving to another title/chapter/track Displaying disc information BD ON REMOTE 1 Selects the Disc mode: DISC 2 Play the disc loaded on the unit: PLAY 3 Displays the playback menu: DISPLAY 4 Selects an item: vV 5 Adjust the playback menu settings: bB 6 Exit the disc playback menu: DISPLAY a b c DVD AVCHD DivX When a disc has more than one title/chapter/track, you can move to another title/chapter/track. Press DISPLAY during playback then use v / V to select the [Title/Chapter/Track] icon. Then, press the appropriate numbered button (0-9) or b / B to select a title/chapter/track number. Playing from selected time BD DVD AVCHD DivX Press DISPLAY during playback. The time search box shows the elapsed playing time. Select the [Time] option and then input the required start time in hours, minutes, and seconds from left to right. For example, to find a scene at 2 hours, 10 minutes, and 20 seconds, enter “21020” and press ENTER. If you enter the wrong numbers, press CLEAR and enter the correct numbers. d e f g a b c d e f g Title/Track – Current title/track number/total number of titles/tracks. Chapter – Current chapter number/total number of chapters. Time – Elapsed playing time. Audio – Selected audio language or channel. Subtitle – Selected subtitle. Angle – Selected angle/total number of angles. Repeat – Selected repeat mode. Notes: • If no button is pressed for a few seconds, the on-screen display disappears. • A title number cannot be selected on some discs. • An item may not be available on some discs or titles. • If BD interactive title is playing back, some setting information is displayed on the screen but prohibited to be changed. 48 Watching from a different angle BD DVD If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. During playback, press DISPLAY to display the playback menu. Use v V to select the [Angle] option, then use b B to select desired angle. Changing repeat mode BD DVD AVCHD DivX Press DISPLAY during playback. The repeat icon shows the current repeat mode. Use b B to select desired repeat mode. If you want to repeat specific portion, use b B to select [A-] at the beginning of the portion you wish to repeat and press ENTER at the end of the portion. Your selected portion will be repeated continually. You cannot select a portion less than 3 seconds. To return to normal playback, use b B to select [OFF]. HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 49 Caution: Enjoying BD-LIVE™ ON REMOTE 1 Inserts a BD-ROM disc with BD-LIVE™ features: OPEN/CLOSE (Z) 2 Check the network connection and settings: BD-Live features need the internet connection. – 3 Inserts an USB Flash Drive to the USB port: BD-Live features need an USB Flash Drive. – 4 Selects a BD-LIVE™ features on the disc menu: v V b B, ENTER This unit allows you to enjoy functions such as picture-in-picture, secondary audio and Virtual packages, etc., with BD-Video supporting BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1/ Final Standard Profile). In addition to the BONUSVIEW function, BD-Video supporting BD-Live (BD-ROM version 2 Profile 2) that has a network extension function allows you to enjoy more functions such as online games by connecting this unit to the Internet. Do not extract the connected USB device while content is being downloaded or a Blu-ray disc is still in the disc tray. Doing so may damage the connected USB device and BD-Live features may not operate properly with the damaged USB device anymore. If the connected USB device seems damaged from such an action, you can format the connected USB device from the PC and reuse it with this player. Notes: • Some BD-Live contents may be restrictively accessed in some territories by contents provider's own decision. • It may take up to several minutes to load and start enjoying BD-Live contents. • Depending on a disc, the BD-Live function may not be operated if [BDLIVE connection] option is set to [Partially Permitted]. (See page 43.) • The connection to the Internet may take time or the Internet may not be connected depending on the connection environment. It is required that you use a broadband connection. • Do not remove the USB Flash Drive during operation. The USB Flash Drive may be damaged. Stop playback and turn off the menu beforehand. Enjoying BD-Live discs with Internet This unit supports BD-Live, a new BD-Video function that allows you to use the following interactive functions when connected to the Internet. (The usable functions and the operating method may vary with each disc. For details, refer to the instructions for the disc.) Tip: – Additional contents such as movie’s trailer, subtitles and BD-J, etc. can be downloaded to the USB Flash Drive to play them. Special video data, etc. may be played back while they are being downloaded to a USB Flash Drive using one function of BD-Live. The playback may be paused depending on the communication environment. Some functions may be disabled to prevent skipping to sections that have not been downloaded, etc. – Special video data, etc. may be played back while they are being downloaded to a USB Flash Drive. AACS Online Preparations: • The unit must be connected to the Internet and set up to use the BD-Live functions (see page 22 and 43). • A USB Flash Drive is required to use this function. Connect a USB Flash Drive (see page 24). • The free space in the USB Flash Drive must be more than 1GB. When discs supporting BD-Live are played back, the player or disc IDs may be sent to the content provider via the Internet. Services and functions to be provided differ depending on the disc. – You can be introduced to other similar movies if you record your viewing history on the server by using these IDs. – Game score histories can be saved. 49 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 50 Playing secondary video (picture-in-picture) and secondary audio Secondary video can be played from a disc compatible with the picture-inpicture function. For the playback method, refer to the instructions for the disc. – To turn on/off secondary video, press PIP. Secondary video is played. Press the button to turn it ON or OFF. – To turn on/off audio with the secondary video, press PIP AUDIO. The secondary audio is played. Press the button to turn it ON or OFF. Notes: • Discs may not always be played back according to the settings on this unit, as certain playback formats are prioritized on certain discs. • Only the primary video is played during search/slow-motion or frame-byframe. • When the secondary video is turned off, the secondary audio does not play. • This function may not work depending on the disc. • The secondary and interactive audio may not be included in the output bitstream if [SPDIF] or [HDMI] option is set to [Primary Pass-Thru]. (Except LPCM Codec : the output always include interactive and secondary audio.) Playing a movie The player can play DivX files on the disc/USB Flash Drives and video contents recorded on a DVD-RW(VR mode) discs. Before playing DivX files, read “DivX file requirement” on page 51. ON REMOTE 1 Inserts a disc/USB Flash Drive containing movie contents. – 2 Displays the [Home Menu]: – 3 Selects the [Movie] option: b B, ENTER 4 Selects a movie from the [MOVIE] menu: vV 5 Plays the selected movie: B) PLAY (B 6 Stops playback: x) STOP (x Notes: • When the USB Flash Drive is connected and a disc is inserted simultaneously, the menu for selecting a media will appear. Select a media then press ENTER. • You can use various playback functions. Refer to pages 45-47. • On the [MOVIE] menu, use red or blue button to move to the previous or next page. • Unfinalized DVD VR format discs may not be played in this unit. • Some DVD-VR disc are made with CPRM data by DVD RECORDER. This unit cannot support these kinds of discs. What is CPRM? CPRM is a copy protection system (with scramble system) only allowing the recording of ‘copy once’ broadcast programs. CPRM stands for Content Protection for Recordable Media. 50 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 51 Movie List menu options Use v / V to select a title on the [MOVIE] menu then press ENTER. The menu options appear. DivX file requirement DivX file compatibility with this player is limited as follows: • Available resolution size: DIVX 3.xx – DIVX 6.xx: 720 x 576 (W x H) pixels XVID, H.264/MPEG-4 AVC: 1920 x1080 (W x H) pixels • The file names of DivX and subtitle are limited to 50 characters. • DivX file extensions: “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mp4”, “.mkv” • Playable DivX subtitle: SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt) Example) DivX file Use v / V to select an option, then press ENTER. • Playable Codec format: “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard playback only), H.264/MPEG-4 AVC • Only the playback function is supported with DivX 6.0 in the unit. • [Play] Starts playback of the selected title. • Playable Audio format: “Dolby Digital”, “DTS”, “MP3”, “WMA”, “AAC” • [Resume Play] Starts playback from where you stopped it previously. • Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48 kHz (WMA) • [Close] Exits menu options. Also you can disappear it by pressing RETURN button. • Bit rate: within 8 - 320 kbps (MP3), within 32 - 384 kbps (WMA) Notice for displaying the DivX subtitle • CD-R/RW, DVD±R/RW, BD-R/RE Format: ISO 9660+JOLIET, UDF and UDF Bridge format If the subtitle does not display properly, change the language code as described below. • Maximum Files/Folders: Less than 650 (total number of files and folders) 1 Press and hold SUBTITLE for 3 seconds during playback. The language code will appear. 2 Use b / B repeatedly to select another language code until the subtitle is displayed properly and then press ENTER. • Not all the WMA Audio format is compatible with this unit. • This player support H.264/MPEG-4 AVC profile Main, High at Level 4.1. For a file with higher level, the player will ask whether you want to play or not. • Displaying subtitle file is not available for video files with “.mpg” and “.mpeg” extensions. • HD movie files contained on the CD or USB 1.0/1.1 may not played properly. BD, DVD or USB 2.0 are recommended to play back HD movie files. 51 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 52 Listening to a music The player can play Audio CDs and MP3/WMA files. Before playing MP3/WMA files, read “MP3/WMA audio file requirement” on page 53. ON REMOTE • On the [MUSIC] menu, use red or blue button to move to the previous or next page. • The equalizer indicator is not coupled with the music in play back. • If there is impossible code to express in the file name, it may be displayed as illegible. 1 Inserts an Audio CD or a disc/USB Flash Drive containing MP3/WMA files. – The [MUSIC] menu options 2 Displays the [Home Menu]: – 3 Selects a [Music] option: b B, ENTER Use v / V to select a track or file on the [MUSIC] menu then press ENTER. The menu options appear. Use v / V to select an option, then press ENTER. 4 Selects a music from the [MUSIC] menu: vV 5 Plays the selected music: B) PLAY (B 6 Stops playback: x) STOP (x • [Play] Starts playback the selected track or file. • [Select Play] Plays back only the marked track(s) or file(s). Use MARKER for selecting the multiple files or tracks. Example) Audio CD Note: When the USB Flash Drive is connected and a disc is inserted simultaneously, the menu for selecting a media will appear. Select a media then press ENTER. Tips: • To go directly to any track or file and play, enter the track/file number using the numbered buttons (0-9). • The playback may start automatically if the Audio CD inserted. • Select a folder then press ENTER and you can view the files in the folder. If you want to move to the upper directory, use b or v/V to highlight [UP Folder] and press ENTER. 52 • [Random] Starts or stops random playback. By pressing > during random playback, the unit selects another track and resumes random playback. • [Unmark All] Unmarks all marked files or tracks. • [Close] Exits menu options. Also you can disappear it by pressing RETURN button. Note: You cannot use [Select Play] and [Random] functions simultaneously. HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 53 MP3/WMA audio file requirement Viewing a photo File extensions: “.mp3”, “.wma” This unit can play a photo files. Before playing photo files, read “Photo file requirement” on page 54. Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA) Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA) CD-R/RW, DVD±R/RW, BD-R/RE Format: ISO 9660+JOLIET, UDF and UDF Bridge format Maximum Files/Folders: Less than 650 (total number of files and folders) Notes on MP3/WMA file • Depending on the size and number of the MP3/WMA files, it may take several minutes to read the contents of the media. • This unit cannot support the ID3 Tag embedded in the MP3 file. • The total playback time indicated on the screen may not correct for VBR files. ON REMOTE 1 Inserts a disc/USB Flash Drive containing photo files. – 2 Displays the [Home Menu]: – 3 Selects a [Photo] option: b B, ENTER 4 Selects a photo from the [PHOTO] menu: vVbB 5 Displays the selected photo in full screen: ENTER 6 Displays the next or previous photo: ./> 7 Return to the [PHOTO] menu screen: x) STOP (x Note: When the USB Flash Drive is connected and a disc is inserted simultaneously, the menu for selecting a media will appear. Select a media then press ENTER. Tips: • To go directly to a specific file, enter the file number using the numbered buttons (0-9). • You can advance to the previous or next file by pressing . or > during viewing a photo file in full screen. • You can start the slide show by pressing PLAY (B) while the [PHOTO] menu appears. 53 HR408D-S.HR407D-S.BBELLLK_ENG • 4/13/09 4:25 PM Page 54 Select a folder then press ENTER and you can view the files in the folder. If you want to move to the upper directory, use v/V/b/B to highlight [UP Folder] and press ENTER. • On the [PHOTO] menu, use red or blue button to move to the previous or next page. • If there is impossible code to express in the file name, it may be displayed as illegible. Options during viewing a photo file in full screen You can use various options during viewing a picture in full screen. Use v V b B to select an option and use the options as described below. a b c d e f g a Use b B to advance to the previous or next file. b Press ENTER to start or pause the slide show. c Press ENTER to play or pause the background music. This option is available after the background music is selected using [Music Select] option. d Press ENTER to rotate the picture clockwise. This option is not available during slide show. e Press ENTER to set the Slide Show speed. f Selects the background music. 1) Press ENTER and the menu will appear. 2) Use v V b B to select a media or folder that there are music file(s). 3) Press ENTER to confirm your selection. g Press ENTER to exit the option menu. To appear the menu again, press ENTER. 54 Photo file requirement File extensions: “.jpg”, “.jpeg”, “.png” Recommended size: Less than 3,000 x 3,000 x 24 bit/pixel Less than 3,000 x 2,250 x 32 bit/pixel CD-R/RW, DVD±R/RW, BD-R/RE Format: ISO 9660+JOLIET, UDF and UDF Bridge format Maximum Files/Folders: Less than 650 (total number of files and folders) Notes on Photo file • The lossless compression photo image files are not supported. • The available size of Progressive photo is limited to 3.3M pixels. • Depending on the size and number of the photo files, it may take several minutes to read the contents of the media. HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 55 a Featured – The featured videos list will be displayed. b Recent Videos – The most recently updated videos list will be displayed. c Most Viewed – The most viewed videos list will be displayed. The period option appears at the bottom of the screen. d Top Rated – The best rated videos list from YouTube server will be displayed. The period option appears at the bottom of the screen. e Search – The keyboard menu will be displayed. See “Searching videos” on page 57 for more detail. f History – The list of videos that you recently played on this unit will be displayed. Maximum of 5 videos can be displayed. g Favorites – This option will be appeared only when the unit is in sign-in status. Displays the videos list that is arranged in the YouTube server with your account. Some videos may not appear on the [Favorites] list, even if the videos are arranged in the server. h Sign in (Sign Out) – Displays the keyboard menu to sign in or returns to the sign-out status. See “Sign in with your YouTube account” on page 57 for more details. i Local site – Choose which country's videos you would like to view. The countries listed on the [Local Site] menu may differ from those listed on the YouTube web site. Playing YouTube videos ON REMOTE 1 Check the network connection and settings: See page 22 and 43. – 2 Check the network configurations: See page 43. – 3 Displays the [Home Menu]: HOME 4 Selects the [YouTube] option: b B, ENTER 5 Selects a desired option on the YouTube menu: v V b B, ENTER 6 Selects a video you want to play: bB 7 Start playback the selected video: B), ENTER PLAY (B or DISPLAY Network condition YouTube menu videos list period options Notes: • The YouTube menu can display 5 videos in the videos list. Press red or blue button to display next/previous 5 videos. • If you select the [Most Viewed] or [Top Rated] option in the YouTube menu, the period options appear at the bottom of the screen. Use v V b B to select a period option and press ENTER to display the videos list within the selected period. • The videos list searched from the player may different with the list searched from a web browser on PC. About the YouTube menu There are various options on the YouTube menu. Use v V b B to select an option and press ENTER to select the options as described below. a b f c g d h e i 55 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 56 About YouTube playback screen When you press PLAY (B) or ENTER at the video you want to watch, the playback screen and content detail will appear on the screen. content detail playback screen progress bar while playing And when the playback ends or stops, the stopped playback screen and related videos list appear on the screen. Use v V b B to select the current video or a video from the related videos list and then press PLAY (B) or ENTER to play the selected video. related videos list playback screen Press DISPLAY to toggle between playback in full screen and playback screen with content detail. Playing a video While watching a video from YouTube via your player, you can control the YouTube video playback. You can use the buttons on the remote to pause and resume viewing, just like when you watch a DVD. While playing a movie, the buttons on the remote do the following: Button(s) Operations PLAY (B) or ENTER Starts playback the video with content detail. DISPLAY Toggle between playback in full screen and playback screen with content detail. X To pause a video while it is playing. To resume playing a paused video, press PLAY (B) again. x Stops the video and displays related videos list. ./> Skip the playback forward or backward . HOME When you have finished watching videos, simply press the HOME button on the remote control to go to the [Home Menu]. progress bar while stopped When you press DISPLAY at the video you want to watch, the playback starts in full screen. playback screen progress bar Full Screen 56 Notes: • The settings of this player do not affect the YouTube’s playback quality. • The playback of YouTube videos may be paused, stopped or buffering occurring often depending on your broadband speed. We recommend a minimum connection speed of 1.5 Mbps. For the best playback condition, a connection speed of 4.0 Mbps is required. Sometimes your broadband speed varies based on your ISP’s network conditions. Contact your ISP if you have problems maintaining a fast connection that is reliable, or if you want to increase your connection speed. Many ISPs offer a variety of broadband speed options. HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 57 Searching videos You can search for videos by entering search words of up to 30 characters. Use b B to select [Search] option from the menu and press ENTER to display the keyboard menu. Use v V b B to select a character then press ENTER to confirm your selection on the keyboard menu. To enter a letter with an accent mark, select the letter from extended character set. Example: Select “D” and then press DISPLAY to display the extended character set. Use b B to select “D” or “Ď” and then press ENTER. [OK]: Searching related videos of search words. [Clear]: Clear all entered characters. [Space]: Inserts a space at the cursor position. [Backspace]: Deletes the previous character at the cursor position. [ABC / abc / #$%&]: Change the keyboard menu settings to capital letter, small letters or symbols. [OK]: Finish entering an ID or password. [Clear]: Clear all entered characters. [Space]: Inserts a space at the cursor position. [Backspace]: Deletes the previous character at the cursor position. [ABC / abc / #$%&]: Change the keyboard menu settings to capital letters, small letters or symbols. If you want to sign out, select the [Sign Out] from the YouTube menu and press ENTER. This unit can automatically store up to 5 IDs which were previously signed-in. The IDs list appears when you select the [Sign In] option. Select a stored ID on the list and press ENTER to display the keyboard menu with the selected ID is entered. You will then only need to enter the password to sign in. When you finish entering the search words, select [OK] and press ENTER to display the related videos list. Sign in with your YouTube account To watch videos from your [Favorites] video list on the YouTube server with your account, you need to sign in with your YouTube account. Use b B to select [Sign In] option from the menu and press ENTER to display the keyboard menu. Use v V b B to select a character then press ENTER to confirm your selection on the keyboard menu. [New ID]: Displays the keyboard menu for entering a new ID and password. [X]: Delete the stored ID as shown left of the [X] symbol. 57 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 58 Software Update (Disc playback and network features only) You can update the player using the latest software to enhance the products operation and/or add new features. You can update the software by connecting the unit directly to the software update server. Step 1: Check the Network Connection and settings See page 22 and 43. 5. The player starts downloading the newest update from the server. (Downloading will take about 80 seconds at the network speed of 4Mbps Speed.) 6. When downloading is completed, the message, “Download is complete. Do you want to update?” appears. 7. Select OK to start updating. (Selecting [CANCEL] will end the update and downloaded file will not be re-usable. To update software the next time, the software update procedure has to be started from the beginning again.) Step 2: Checking Network Configuration Caution: Do not turn off the power during the software update. See page 43. Note: If the software includes the driver update, disc tray may open during the process. Step 3: Updating Software Cautions: • Before updating the software in your player, remove any disc and USB Flash Drive from the player. • Before updating the software in your player, turn the player off and then turn it back on. • During the software update procedure, do not turn off the player or disconnect AC power, or do not press any button. • If you cancel the update. turn off the power and turn it on for stable performance. • This unit cannot be updated to previous software version. 1. Select [Software Update] option in the [Setup] menu then press B or ENTER. 2. The player will check for the newest update. Caution: Pressing ENTER while checking for the update will end the process. Note: If there is no update available, the Message, “No update is found.” appears. Press ENTER to return to the [Home Menu]. 3. If newer version exists, the message “A new update was found. Do you want to download it?” appears. 4. Select OK to download the update. (Selecting [CANCEL] will end the update.) 58 8. When update is completed, the message, “Update is complete.” will appear, and the power will turn off automatically after 5 seconds. 9. Turn the power back on. The system now operates with the new version. 10. After completing the update process, repeat procedures 1-4 in Step 4 and check if there are no more updates available. Tip: The Software Update function may not work properly depending on your internet environment. In this case, you can obtain the latest software from the authorized LG Electronics Service Centre then update your player. Refer to “Customer Support” on page 65. HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 59 Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. BRANDS ADMIRAL ADYSON AKAI AKURA ALBA ALLSTAR AMSTRAD AMWAY ANITECH ANTECNO ARC EN CIEL ASA ASBERG ASORA ATLANTIC AUDIOSONIC AUTOVOX BANK BEKO BESTAR BLAUPUNKT BONDSTEC BOSCH BRANDT ELECTRONIQUE BRIONVEGA BSR BUSH CENTURY CGE CIE CLATRONIC CLARIVOX CONDOR CONIC CODES 137 204 159 219 009 010 108 132 133 135 139 140 156 174 175 064 086 108 110 155 171 009 060 064 108 006 025 157 108 010 049 108 185 219 064 173 179 239 087 102 108 235 236 185 171 089 197 085 159 163 197 232 045 085 086 108 250 086 031 091 092 096 097 098 099 210 253 163 210 173 179 225 239 204 144 009 165 139 025 009 164 033 108 219 136 204 165 108 010 165 139 144 232 210 170 064 108 144 149 159 171 185 149 191 BRANDS CONTEC CONTINENTAL EDISON COSMOS CROSLEY CROWN CS-ELECTRONICS DAEWOO DANSAI DE GRAAF DECCA DECCAVIDEO DUAL DUMONT ELBE ELBIT ELECTROVENDA ELEKTRONIKA ELIN ELITE ELMAN ELTA EMERSON ESC ETRON EUROPHON EXPERT FENNER FERGUSON FINLANDIA FINLUX FIRST-LINE FISHER FORMENTI CODES 171 222 173 179 225 239 108 165 084 064 051 010 108 070 190 108 233 204 058 108 108 108 108 064 144 010 108 108 133 144 089 171 078 199 194 008 140 236 144 086 108 204 085 086 108 144 171 185 108 120 127 170 219 134 108 159 161 162 184 189 206 144 157 160 192 246 248 BRANDS FRABA FRONTECH FUBA FUJITSU GENERAL FUNAI GALAXIS GALERIA GBC GEC GELOSO GENERAL GENERAL TECHNIC GOLDHAND GOLDSTAR GOODMANS GORENJE GPM GRANADA 149 GRUNDIG 171 204 HCM HIFIVOX HINARI HIT HITACHI 159 079 200 195 087 144 080 160 182 195 198 201 202 102 104 105 107 108 159 161 174 189 235 CODES 108 136 171 220 073 109 088 159 197 010 108 185 171 137 144 171 011 108 129 147 159 189 064 137 144 164 171 171 171 159 171 038 050 108 110 136 144 159 163 166 171 191 219 237 009 064 108 109 110 120 159 170 171 086 010 064 027 105 108 111 121 134 140 159 162 167 187 194 195 238 091 092 093 094 095 097 098 100 101 172 232 238 010 108 159 171 173 179 239 010 064 108 133 171 204 011 013 015 017 021 022 023 024 028 029 030 035 039 040 041 048 053 054 055 056 057 120 127 128 129 134 135 140 143 145 147 151 156 159 173 193 219 208 222 233 149 59 HR408D-S.HR407D-S.BBELLLK_ENG BRANDS HYPER ICE IMPERIAL INGERSOLL INNO HIT INTERBUY INTERCORD INTERFUNK INTERVISION IRRADIO ITC ITS ITT JVC KAIDO KAPSCH KARCHER KATHREIN KAWA KENDO KENNEDY KNEISSEL KONKA KORTING KUBA KUBA ELECTRONIC KURA LENCO LG LIESENKOTTER LIFETEC LOEWE LOGIK LUMA LUXOR 60 4/13/09 CODES 009 159 163 171 009 010 064 108 171 043 049 108 139 144 154 165 255 171 159 189 237 010 233 108 109 113 130 133 134 135 137 141 146 147 148 165 179 210 010 086 108 132 144 166 163 235 237 144 159 009 010 064 171 141 151 186 009 169 136 089 147 148 197 084 108 109 009 060 108 137 157 197 108 009 086 204 209 233 233 134 108 170 001(Default) 038 050 108 110 136 144 159 163 166 171 191 219 237 108 210 010 064 108 170 109 113 204 205 070 227 137 197 102 104 132 133 134 135 138 140 143 145 153 156 174 186 237 4:25 PM Page 60 BRANDS M ELECTRONIC MAGNADYNE MAGNAFON MAGNASONIC MARANTZ MARSHAL MATSUI MERRIT METZ MITSUBISHI MIVAR MNARTT MTC MULTITECH MURPHY NAONIS NECKERMANN NEI NIKKAI NIKKO NOBLIKO NOGAMATIC NOKIA NORDMENDE NORMN NOVA OCEANIC OKANO ONWA ORAVA CODES 103 104 163 164 199 108 108 064 009 016 070 108 171 172 132 047 092 204 207 075 076 224 240 044 042 007 086 109 136 159 232 137 037 059 108 109 135 137 064 108 219 108 232 235 173 179 014 019 132 133 145 146 129 173 225 226 108 087 032 103 108 009 010 108 BRANDS ORBITER ORION 204 OSAKE OTTO-VERSAND 025 060 061 062 063 131 136 152 154 159 097 098 100 101 108 254 077 097 113 204 222 PAEL PANASONIC PATHE CINEMA PATHE MARCONI PHILCO PHILIPS 159 235 134 171 185 060 092 098 100 101 113 115 118 119 134 143 157 159 239 032 134 147 179 228 102 135 148 180 239 103 138 156 181 104 108 140 141 174 193 195 104 135 140 156 PIONEER PRANDONI-PRINCE PRIMA PRO VISION PROFEX PROFITRONIC QUELLE RADIOLA RADIOTONE REDIFUSSION REVOX REX RFT RITAR ROADSTAR ROSITA SABA 064 SAISHO CODES 086 025 059 060 061 062 064 070 108 110 118 219 106 002 005 009 014 059 060 081 082 083 085 092 097 098 100 101 108 109 111 113 235 002 003 005 167 168 229 144 173 179 225 239 090 108 139 144 148 165 204 065 066 067 068 069 092 108 109 111 112 114 115 116 119 122 123 124 125 193 212 251 252 193 137 235 219 108 108 136 171 108 002 010 014 019 025 059 060 072 084 086 087 088 092 097 098 100 101 102 175 108 010 085 108 171 187 109 088 089 137 157 158 164 197 246 247 064 085 135 204 138 108 171 079 146 147 173 179 181 193 195 225 226 239 025 060 070 136 159 HR408D-S.HR407D-S.BBELLLK_ENG BRANDS SAKIO SALORA SAMBERS SAMSUNG SANY SANYO SCHNEIDER SEG SEI-SINUDYNE SELECO SENTRA SHARP SHINTOM SHINTOSHI SHIVAKI SIAREM SIEMENS SIESTA SILVER SINGER SINUDYNE SMARAGO SOLAVOX SONOLOR SONTEC SONY SPECTRA STARLITE STARLUX STERN SUNSTAR CODES 171 019 032 135 137 150 156 235 004 010 171 220 193 014 018 086 087 009 064 163 233 010 064 185 219 025 108 088 089 064 133 081 082 108 108 108 204 092 096 210 218 085 010 064 108 164 118 131 172 133 140 156 108 072 074 216 217 170 108 171 171 088 089 108 171 4/13/09 103 104 132 133 134 138 140 142 143 145 174 237 241 050 086 108 117 126 237 019 020 032 034 071 189 218 221 222 223 088 108 133 141 159 108 144 159 165 171 204 212 137 157 197 222 083 222 097 098 100 101 108 219 221 204 211 212 213 214 215 222 137 157 197 4:25 PM Page 61 BRANDS SUPERTECH TADISTAR TASHIKO TEC TECHLINE TECHNISAT TECNISON TEKON TELEAVIA TELEFUNKEN TELEOPTA TELERNT TELETECH TELETEXT TELETON TELETON TENSAI TENSON TESLA THOMSON THORN THORN-FERGUSON TOSHIBA TOWADA TRISTAR TRIUMPH UHER 089 ULTRAVOX UNIVERSUM UNIVOX VESTEL VIDEOSAT VIDEOTON VIDEOWAY VISION CODES 108 139 152 171 108 108 159 218 108 139 144 159 170 171 185 108 165 108 171 171 173 178 179 225 239 079 177 179 181 193 195 200 210 171 109 165 171 115 088 089 134 159 197 064 108 144 149 171 191 171 204 052 078 079 134 173 178 179 181 193 195 225 239 011 014 016 018 026 028 066 072 075 087 097 102 108 116 135 141 145 146 160 160 188 200 227 012 016 026 036 037 222 232 144 185 010 064 025 219 236 108 109 149 185 197 233 108 164 185 204 174 204 108 165 178 193 230 108 149 BRANDS VOXSON WALTHAM WATSON WEGA WHITE WESTINGHOUSE YOKO ZANUSSI ZENITH CODES 137 204 178 064 108 149 171 208 222 108 110 149 010 064 108 136 144 159 164 170 171 137 197 231 61 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 62 Language Codes Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu]. Language Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Chinese Code 6565 6570 8381 6577 6582 7289 6583 6588 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 9072 Language Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Code 7282 6783 6865 7876 6978 6979 6984 7079 7074 7073 7082 7089 7176 7565 6869 6976 7576 7178 7185 Language Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code 7265 7387 7273 7285 7383 7378 7365 7165 7384 7465 7578 7583 7575 7589 7579 7585 7679 7665 7686 Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Code 7678 7684 7775 7771 7783 7776 7773 7782 7779 7778 7865 7869 7879 7982 8065 8083 7065 8076 8084 Language Quechua Rhaeto-Romance Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi Singhalese Slovak Slovenian Spanish Sudanese Swahili Swedish Tagalog Code 8185 8277 8279 8285 8377 8365 7168 8382 8372 8378 8368 8373 8375 8376 6983 8385 8387 8386 8476 Language Tajik Tamil Telugu Thai Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapük Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 8471 8465 8469 8472 8479 8482 8475 8487 8575 8582 8590 8673 8679 6789 8779 8872 7473 8979 9085 Area Codes Choose an area code from this list. Area Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo 62 Code AF AR AU AT BE BT BO BR KH CA CL CN CO CG Area Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador Ethiopia Fiji Finland France Germany Great Britain Greece Code CR HR CZ DK EC EG SV ET FJ FI FR DE GB GR Area Greenland Hong Kong Hungary India Indonesia Israel Italy Jamaica Japan Kenya Kuwait Libya Luxembourg Malaysia Code GL HK HU IN ID IL IT JM JP KE KW LY LU MY Area Maldives Mexico Monaco Mongolia Morocco Nepal Netherlands Netherlands Antilles New Zealand Nigeria Norway Oman Pakistan Panama Code MV MX MC MN MA NP NL AN NZ NG NO OM PK PA Area Paraguay Philippines Poland Portugal Romania Russian Federation Saudi Arabia Senegal Singapore Slovak Republic Slovenia South Africa South Korea Spain Code PY PH PL PT RO RU SA SN SG SK SI ZA KR ES Area Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Uganda Ukraine United States Uruguay Uzbekistan Vietnam Zimbabwe Code LK SE CH TW TH TR UG UA US UY UZ VN ZW HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 63 Troubleshooting Symptom Possible Cause Correction No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. The power is on, but the player does not work. • No disc is inserted. • Insert a disc. (Check the disc indicator in the display window is lit.) No picture. • The TV is not set to receive video signal output. • Select the appropriate video input mode on the TV. • The video cable is not connected securely. • Connect the video cable securely. • The selected resolution is not capable with your TV. • Select another resolution using RESOLUTION button. • The channel is not found or stored. • Check your antenna connection. • The equipment connected with the audio cable is not set to receive disc signal output. • Select the correct input mode of the audio receiver so you can listen to the sound from the player. • The power of the equipment connected with the audio cable is turned off. • Turn on the equipment connected with the audio cable. • The [AUDIO] options are set to the wrong position. • Set the [AUDIO] options to the correct position (see page 41). • The player is in reverse play, fast forward, slow motion or pause mode. • Return to the normal playback. • The disc is upside down. • Insert the disc with the playback side down. • An unplayable disc is inserted. • Insert a playable disc. (Check the disc type and regional code.) • The rating level is set. • Change the rating level. • The disc was recorded on another unit and was not finalized. • Finalize the disc on that unit. • The Remote Control is not pointed at the remote sensor on the player. • Point the Remote Control at the remote sensor of the player. • The Remote Control is too far from the player. • Operate the Remote Control closer to the player. • Your broadband speed is not fast enough to play YouTube videos. • Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended. No sound. The player does not start playback. The Remote Control does not work properly. The YouTube video playback is often buffering. 63 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 64 Troubleshooting Symptom BD-Live feature does not work. Possible Cause Correction • A USB Flash Drive is not connected. • Connect a FAT16 or FAT32 formatted USB Flash Drive to the USB port (see page 24). • The connected USB Flash Drive does not have enough space. • Secure at least 1GB free space in the USB Flash Drive for using BD-Live features • Internet connection is not established. • Ensure that the unit is correctly connected to the local area network and can access the internet (see page 22). • Your broadband speed is not fast enough to use the BD-Live features. • Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended. • The [BD-LIVE connection] option in the [Setup] menu is set to [Prohibited]. • Set the [BD-LIVE connection] option to [Permitted]. The YouTube ID does not stored in the IDs list automatically. • The IDs list is full. • Delete one of the stored ID and Sign-In with the ID again. Recording • Cannot record or does not record successfully. • Check that the source you are trying to record in not copy protected. • The power may have failed during recording. • Timer record does not record successfully. • Clock is not set to correct time. • The start time of the timer recording is past. • Two timer recordings may have overlapped, in which case only the earlier one will record completely. • When setting the recording channel, make sure you set the unit’s built-in tuner, not the TV’s built-in tuner. • Stereo Audio Record and/or Playback is not present. • TV is not Stereo-compatible. • Broadcast program is not in stereo format. • The A/V Output jacks on the unit are not connected to TV A/V In jacks. HDMI 64 • The connected HDMI device does not display any picture. • Try disconnecting then reconnecting the HDMI cable. • Try switching the power of the HDMI device off then back on. HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 65 Troubleshooting Symptom HDMI Possible Cause Correction • The connected HDMI device does not display any picture. • The video input of the connected device is set correctly for this unit. • The HDMI cable you are using is fully HDMI-compliant . Using a non-standard cable may result in no picture being output. • Not all HDCP-compatible DVI devices will work with this unit. • The connected HDMI device does not output sounds. • Some HDMI-compatible devices do not output sounds (check the manual that came with the connected device). • If your TV is not capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu. When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them. • If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu. • If your TV is not equipped with DTS decoder, set the [DTS] options to [OFF] on the setup menu. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible receiver via one of this unit’s digital audio outputs. Customer Support Resetting the unit You can update the Player using the latest software to enhance the products operation and/or add new features. To obtain the latest software for this player (if updates have been made), please visit http://lgservice.com or contact LG Electronics customer care centre. Design and specifications are subject to change without notice. If you observe any of the following symptoms. • The unit is plugged in, but the power will not turn on or off. • The front panel display is not working. • The unit is not operating normally. You can reset the unit as follows. • Press and hold the POWER button for at least five seconds. This will force the unit to power off then turn the unit back on. • Unplug the power cord, wait at least five seconds, and then plug it in again. 65 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 66 Outputs Specifications VIDEO OUT: General Power requirements: Power consumption: Dimensions (W x H x D): Net Weight (Approx.): Operating temperature: Operating humidity: Television system AC 200-240 V, 50/60 Hz 33W Approx. 430 x 54 x 310 mm without foot 4.4 kg 5 °C to 35 °C 5 % to 90 % Analog: PAL/SECAM color system Digital: DVB-T Standard Compliant 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 COMPONENT VIDEO OUT: (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 HDMI OUT (video/audio): 19 pin (HDMI standard, Type A) ANALOG AUDIO OUT: 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 DIGITAL OUT (COAXIAL): 0.5 V (p-p), 75 Ω, RCA jack x 1 DIGITAL OUT (OPTICAL): 3 V (p-p), Optical jack x 1 System Recording (HDD Mode) Laser: Recording format: Recordable media: Recordable time: Disc system: Frequency response: Video recording format: Sampling frequency Compression format Audio recording format: Sampling frequency Compression format PAL HDD (HR400 : 160GB, HR450 : 250GB) HDD (160/250GB, MPEG2 Recording): Approx. 43/66 hours (XP mode), 84/129 hours (SP mode), 164/251 hours (LP mode), 233/356 (EP mode), 477/729 hours (MLP mode) 27MHz MPEG2 AUDIO IN: USB IN: 66 LAN port: Ethernet jack x 1, 10BASE-T/100BASE-TX Signal-to-noise ratio: Accessories SCART cable (1), RF cable (1), Remote control (1), Battery (2) 48kHz Dolby Digital Inputs ANTENNA IN: VIDEO IN: Harmonic distortion: Dynamic range: Semiconductor laser, wavelength: 405nm / 650 nm Standard PAL/NTSC colour TV system 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) More than 100 dB (ANALOG OUT connectors only) Less than 0.008% More than 95 dB Antenna input, 75 ohms 1.0 Vp-p 75 ohms, sync negative, RCA jack x 1 / SCART x 2 2.0 Vrms more than 47 kohms, RCA jack (L, R) x 1 / SCART x 2 4 pin (USB 1.1 standard) HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 67 Network Service (Disc playback and network features only) PLEASE READ CAREFULLY. USE OF THE NETWORK SERVICES IS SUBJECT TO THE FOLLOWING TERMS AND CONDITIONS. Use of the Network Services requires an Internet connection which is sold separately and for which you are solely responsible. The Network Services may be limited or restricted depending upon the quality, capabilities and technical limitations of your Internet service. The Network Services belong to third parties and may be protected by copyright, patent, trademark and/or other intellectual property laws. The Network Services are provided solely for your personal and noncommercial use. Unless expressly authorized by the respective content owner or service provider, you shall not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services accessible through this product. LG IS NOT RESPONSIBLE FOR YOUR USE OF THE NETWORK SERVICES. THE NETWORK SERVICES ARE PROVIDED “AS IS.” TO THE FULLEST EXTENT PERMISSIBLE BY LAW, LG MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHATSOEVER (i) FOR THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY NETWORK SERVICE MADE AVAILABLE THROUGH THIS PRODUCT; OR (ii) THAT THE NETWORK SERVICES ARE FREE OF VIRUSES OR OTHER COMPONENTS THAT MAY INFECT, HARM, OR CAUSE DAMAGE TO THIS PRODUCT, YOUR COMPUTER, TELEVISION, OTHER EQUIPMENT, OR ANY OTHER PROPERTY. LG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN CONTRACT, TORT, STRICT LIABILITY OR OTHERWISE, SHALL LG BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, STATUTORY, CONSEQUENTIAL OR OTHER DAMAGES OR ATTORNEY FEES OR EXPENSES RELATING TO OR ARISING OUT OF THE NETWORK SERVICES EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR IF SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN. The Network Services may be terminated or interrupted at any time, and LG makes no representation or warranty that any Network Service will remain available for any period of time. Use of the Network Services may be subject to additional terms and conditions of the respective third party service provider. The Network Services are transmitted by third parties by means of networks and transmission facilities over which LG has no control. LG EXPRESSLY DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR ANY INTERRUPTION OR SUSPENSION OF ANY NETWORK SERVICE. LG shall be neither responsible nor liable for customer service related to the Network Services. Any question or request should be made directly to the respective Network Service providers. “Network Service(s)” means the third party services accessible through this product including but not limited to all data, software, links, messages, video and other content found thereon or used in connection therewith. “LG” means LG Electronics, Inc. its parent company and all of their respective subsidiaries, affiliates and related companies worldwide. 67 HR408D-S.HR407D-S.BBELLLK_ENG 4/13/09 4:25 PM Page 68 Open source software notice This product includes • Freetype library : copyright © 2003 The FreeType Project (www.freetype.org). • Zlib compression library: Copyright © 1995-2002 Jean-loup Gailly and Mark Adler. • Expat library : copyright © 2006 expat maintainers. • OpenSSL library : - cryptographic software written by Eric Young (firstname.lastname@example.org). - software written by Tim Hudson (email@example.com). - software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org) This product includes other open source software. • Copyright © 1995, 1996, 1997 Kungliga Tekniska Hogskolan (Royal Institute of Technology, Stockholm, Sweden). • Copyright © 1995-2008 International Business Machines Corporation and others • Copyright © 1999, ASMUS, Inc. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 68 • HarfBuzz IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS ON AN “AS IS” BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.