96C32-A_cvr.qxd
7/28/2004
1:43 PM
Page 1
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office.
All other product or service names are the property of their respective owners.
© Motorola, Inc. 2004. All rights reserved. Printed in U.S.A.
MOTOROLA et le logotype au M stylisé sont enregistrés auprès du Bureau des marques et brevets des États-Unis.
Tous les autres noms de produits et de services sont la propriété de leurs titulaires respectifs.
© Motorola, Inc. 2004. Tous droits réservés. Imprimé aux États-Unis.
PM400™
Commercial Series
*6881096C32*
Two-Way Radio User Guide
6881096C32-B
de la radio bidirectionnelle
Manuel de l'utilisateur
EnglishTOC.fm Page 0 Monday, August 2, 2004 2:43 PM
COMPUTER SOFTWARE
COPYRIGHTS
The Motorola products described in this
manual may include copyrighted Motorola
computer programs stored in semiconductor
memories or other media. Laws in the United
States and other countries preserve for
Motorola certain exclusive rights for
copyrighted computer programs including, but
not limited to, the exclusive right to copy or
reproduce in any form the copyrighted
computer program. Accordingly, any
copyrighted Motorola computer programs
contained in the Motorola products described
in this manual may not be copied, reproduced,
modified, reverse-engineered, or distributed in
any manner without the express written
permission of Motorola. Furthermore, the
purchase of Motorola products shall not be
deemed to grant either directly or by
implication, estoppel, or otherwise, any license
under the copyrights, patents or patent
applications of Motorola, except for the normal
non-exclusive license to use that arises by
operation of law in the sale of a product.
EnglishTOC.fm Page 1 Thursday, August 5, 2004 5:05 PM
Getting Started . . . . . . . . . . . . . . . . . . . . . .21
CONTENTS
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Product Safety and RF Exposure
Compliance . . . . . . . . . . . . . . . . . . . . . . . . . 5
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 7
Conventional Radio Systems . . . . . . . . . . . .
Trunked Radio Systems . . . . . . . . . . . . . . . .
LTR Trunked Systems . . . . . . . . . . . . . . .
PM400 Radio Features . . . . . . . . . . . . . . . . .
Radio-Wide Features . . . . . . . . . . . . . . . .
LTR Trunked Features . . . . . . . . . . . . . . .
Conventional Signaling Features . . . . . . .
7
7
7
8
8
8
8
Radio Overview . . . . . . . . . . . . . . . . . . . . . 11
LED Indicators. . . . . . . . . . . . . . . . . . . . . . .
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Optional Enhanced Keypad Microphone
(RMN5029) . . . . . . . . . . . . . . . . . . . . . . . .
Indicator Tones . . . . . . . . . . . . . . . . . . . . . .
Programmable Buttons . . . . . . . . . . . . . . . .
Menu Buttons . . . . . . . . . . . . . . . . . . . . . . .
Menu Button. . . . . . . . . . . . . . . . . . . . . .
Menu Scroll Buttons . . . . . . . . . . . . . . . .
Navigate the Menu . . . . . . . . . . . . . . . . .
12
12
13
15
16
19
19
19
19
CONTENTS
Computer Software Copyrights . . . inside cover
Turn the Radio On or Off . . . . . . . . . . . . . . .21
Adjust the Volume . . . . . . . . . . . . . . . . . . . .21
Select an LTR Channel/Talkgroup . . . . . . . .22
Select a Conventional Channel . . . . . . . . . .22
Receive a Conventional or LTR Call. . . . . . .22
Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Silent Monitor. . . . . . . . . . . . . . . . . . . . . .23
Open Squelch Monitor. . . . . . . . . . . . . . .23
Transmit an LTR Call . . . . . . . . . . . . . . . . . .24
Transmit a Conventional Call . . . . . . . . . . . .24
Repeater or Talkaround Mode . . . . . . . . . . .25
Revert Memory Channel (1 & 2) . . . . . . . . . .25
Store Memory Channel (1 & 2) . . . . . . . . . . .25
Home Revert AutoKey (1 & 2) . . . . . . . . . . .26
Set Local or Distance Mode . . . . . . . . . . . . .26
VOX Operation . . . . . . . . . . . . . . . . . . . . . . .26
Program PL/DPL Codes . . . . . . . . . . . . . . . .27
Radio Calls . . . . . . . . . . . . . . . . . . . . . . . . .29
Selective Radio Inhibit . . . . . . . . . . . . . . . . .29
Receive a Selective Call
(Conventional Operation Only) . . . . . . . . . .29
Send a Selective Call
(Conventional Operation Only) . . . . . . . . . .30
Receive a Call Alert™ Page
(Conventional Operation Only) . . . . . . . . . .30
1
English
CONTENTS
EnglishTOC.fm Page 2 Monday, August 2, 2004 2:43 PM
Send a Call Alert Page
(Conventional Operation Only) . . . . . . . . . .31
Repeater Access . . . . . . . . . . . . . . . . . . . . .31
Radio Check . . . . . . . . . . . . . . . . . . . . . . . . .32
Emergency Alerts . . . . . . . . . . . . . . . . . . . . .32
Send an Emergency Alert. . . . . . . . . . . . . . .32
Clear an Emergency Alert. . . . . . . . . . . . . . .32
Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Talkback . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Start System Scan . . . . . . . . . . . . . . . . . . . .34
Stop System Scan . . . . . . . . . . . . . . . . . . . .34
Start Auto Scan . . . . . . . . . . . . . . . . . . . . . .35
Stop Auto Scan. . . . . . . . . . . . . . . . . . . . . . .35
Delete a Nuisance Channel/Talkgroup . . . . .35
Restore Channels/Talkgroups to the
Scan List. . . . . . . . . . . . . . . . . . . . . . . .36
Edit a Scan List. . . . . . . . . . . . . . . . . . . . . . .36
Add or Delete Channels/Talkgroups in a
Scan List . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Prioritize a Channel/Talkgroup in a Scan
List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Tone Preferences . . . . . . . . . . . . . . . . . . . . 49
Tones On/Off . . . . . . . . . . . . . . . . . . . . . . . . 51
Keypad On/Off Tones . . . . . . . . . . . . . . . . . 51
Call Tone Tagging (Conventional
Operation Only) . . . . . . . . . . . . . . . . . . . . . 52
Escalert (Conventional
Operation Only) . . . . . . . . . . . . . . . . . . . . . 53
User Settings . . . . . . . . . . . . . . . . . . . . . . . 55
Set Squelch Level . . . . . . . . . . . . . . . . . . . . 57
Set Power Level . . . . . . . . . . . . . . . . . . . . . . 57
Option Board On/Off . . . . . . . . . . . . . . . . . . 58
Set the Backlight Intensity . . . . . . . . . . . . . . 59
Display the Software Version . . . . . . . . . . . . 59
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Limited Warranty . . . . . . . . . . . . . . . . . . . . . 61
Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Accessories . . . . . . . . . . . . . . . . . . . . . . . . 65
Receive a Phone Call . . . . . . . . . . . . . . . . . .41
Make a Phone Call . . . . . . . . . . . . . . . . . . . .43
Edit the Phone List . . . . . . . . . . . . . . . . . . . .44
Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Alarm and Accessories . . . . . . . . . . . . . . . . 65
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
2
English
Add an Entry . . . . . . . . . . . . . . . . . . . . . . 45
Delete an Entry . . . . . . . . . . . . . . . . . . . . 45
Edit an Entry . . . . . . . . . . . . . . . . . . . . . . 46
Edit Access/Deaccess Codes . . . . . . . . . 47
EnglishTOC.fm Page 3 Monday, August 2, 2004 2:43 PM
66
66
66
67
67
CONTENTS
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Station . . . . . . . . . . . . . . . . . . . . . .
Data - CES Wireless Technologies. . . . . . .
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . .
Public Address . . . . . . . . . . . . . . . . . . . . . .
3
English
EnglishTOC.fm Page 4 Monday, August 2, 2004 2:43 PM
CONTENTS
Notes:
4
English
00_SafetyNA.fm Page 5 Monday, August 2, 2004 10:33 AM
SAFETY
PRODUCT SAFETY AND RF
EXPOSURE COMPLIANCE
!
Caution
Before using this product, read
the operating instructions for safe
usage contained in the Product
Safety and RF Exposure booklet
enclosed with your radio.
SAFETY
ATTENTION!
This radio is restricted to occupational use
only to satisfy FCC RF energy exposure
requirements. Before using this product, read
the RF energy awareness information and
operating instructions in the Product Safety
and RF Exposure booklet enclosed with your
radio (Motorola Publication part number
68P81095C99) to ensure compliance with RF
energy exposure limits.
For a list of Motorola-approved antennas,
batteries, and other accessories, visit the
following web site which lists approved
accessories: http://www.motorola.com/cgiss/
index.shtml.
5
English
00_SafetyNA.fm Page 6 Monday, August 2, 2004 10:33 AM
SAFETY
Notes:
6
English
00_Introduction.fm Page 7 Monday, August 2, 2004 10:34 AM
INTRODUCTION
Your PM400™ radio can operate on both LTR®
trunked and conventional radio systems. This
radio combines the very latest in two-way
technology while delivering outstanding
functionality at the touch of a button.
CONVENTIONAL RADIO SYSTEMS
Conventional typically refers to radio-to-radio
communications through a single channel.
Conventional systems also allow radio users to
extend communication coverage by relaying
their messages through a repeater. To ensure
coordinated use by multiple users, each radio
user must monitor the channel or repeater
before transmitting to verify that the system is
not currently busy.
A trunked radio system allows a large number
of users to share a relatively small number of
frequencies or repeaters without interfering
with each other. The airtime of all the repeaters
in a trunked system is pooled, which
maximizes the amount of airtime available to
Some of the benefits of trunked two-way radio
systems are:
•
•
•
•
No channel/talkgroup monitoring required prior
to transmission
Improved system access
Automatic channel/talkgroup selection
Increased privacy among members of the same
group
LTR Trunked Systems
LTR (Logic Trunked Radio) is a transmissionbased trunking protocol developed by the E. F.
Johnson Company for primarily single-site
trunking applications. In transmission trunking,
a repeater is used for only the duration of a
single transmission. Once a transmission is
completed, that repeater becomes available to
other users. This means that a conversation
comprised of many transmissions may occur
over several different channels/talkgroups
within the LTR system. This method of trunking
provides system efficiency by making
repeaters available to all users after every
transmission.
INTRODUCTION
TRUNKED RADIO SYSTEMS
any one radio and minimizes channel/
talkgroup congestion.
When an LTR trunked radio user wants to
communicate with another radio, the user’s
7
English
00_Introduction.fm Page 8 Thursday, August 5, 2004 5:06 PM
radio sends a “channel/talkgroup request” to
the home repeater. The system then sends
back a “channel/talkgroup grant” to the user’s
radio. The channel/talkgroup grant message
contains the number of a “go to” repeater to tell
the radio which repeater to use. This “go to”
repeater can be the same as the radio’s home
repeater or another repeater in the system.
•
•
•
•
•
LTR Trunked Features
•
The radio uses the “go to” repeater for
transmission. Once the transmission has
ended, this repeater is available for other
users.
INTRODUCTION
Radio-Wide Features
•
•
•
8
English
64 Conventional Channels
Up to 10 Sites and 100 Talkgroups
Up to 20 Repeaters per Site
8-Character Alphanumeric Display
4 Programmable Feature Buttons
2 Memory Channels
Telephone Interconnect
User-programmable Phone, Scan, and TPL/
DPL Lists
Option Board Expandability
Busy Channel Lockout
High/Low Power Settings
MDC 1200 Signaling
- Selective Radio
Inhibit Decode
- Radio Check
Decode
- MDC Pre-Time
- PTT ID Encode/
Decode
PM400 RADIO FEATURES
•
•
•
•
•
•
•
•
Transmit Time-Out Timer
Monitor and Sticky Permanent Monitor
System Scan with 2 Priority Levels and Revert
Scan
Companding Mode
Group Data Receive
- DOS
- LTR Data Revert
Mode
- Universal ID
Receive
Conventional Signaling Features
•
MDC 1200 Signaling
- Emergency Alert - PTT ID Encode/
Decode
Encode
- Selective Radio
Inhibit Decode
00_Introduction.fm Page 9 Thursday, August 5, 2004 5:06 PM
•
Quik-Call II Signaling
- Call Alert
Encode/Decode
- Selective Call
Encode/Decode
•
- Radio Call List
- Call Tone
Tagging
DTMF Signaling
- DTMF PTT ID
Encode
- DTMF Call Alert
Encode
- DTMF
Selective Call
Encode
INTRODUCTION
9
English
00_Introduction.fm Page 10 Monday, August 2, 2004 10:34 AM
INTRODUCTION
Notes:
10
English
01_Overview.fm Page 11 Monday, August 2, 2004 2:53 PM
RADIO OVERVIEW
RADIO OVERVIEW
Push-To-Talk
(PTT) Button
Channel Selector/
Menu Scroll Buttons
Red/Yellow/Green
LED Indicators
Speaker
On/Off/Volume
Knob
Display
PERS4
PM400
P1
Microphone
Jack
Menu Buttons
(P1, P2)
P2
P3
P4
Programmable Buttons
(P1, P2, P3, P4)
11
English
RADIO OVERVIEW
01_Overview.fm Page 12 Monday, August 2, 2004 2:53 PM
LED INDICATORS
DISPLAY
Indicates power up, transmit, receive, scan,
monitor status, channel/talkgroup busy, Call
Alert™ receive/transmit, and Selective Call
receive/transmit.
LED State/Color
Indication
Radio Call
Red
Transmitting
Flashing Red
Receiving
Flashing Red
Channel/Talkgroup Busy
Scan
Flashing Green
Scanning for activity
Call Alert
Indicates receiving a Call Alert
Yellow
Indicates sending a Call Alert
Selective Call
Flashing Yellow
Indicates receiving a Selective
Call
Yellow
Indicates sending a Selective
Call
Sticky Monitor/Open Squelch
12
English
The top row displays menu and radio status
information:
Symbol
I
Signal Strength
B
Power Level
Flashing Yellow
Yellow
PERS4
While monitoring
C
Monitor
D
Indication
The more bars, the stronger
the signal being received by
your radio.
Low Power “ R” or High
Power “ S” is activated.
The selected channel is being
monitored.
Phone mode is selected.
Phone
G
Scan
Indicates that the Scan
feature has been activated.
01_Overview.fm Page 13 Monday, August 2, 2004 2:53 PM
H
Priority 1 Scan
( flashing)
•
H
Priority 2 Scan
( steady)
•
J
Talkaround
F
Call Received
Indication
Indicates scan has stopped
and landed on an active
Priority 1 channel/talkgroup.
Indicates scan has stopped
and landed on an active
Priority 2 channel/talkgroup.
E
An Emergency Alarm is being
sent.
Option Board
Microphone
A Selective Call or Call Alert
has been received.
Not Used
A
Your radio may be ordered with an optional
DTMF (Dual-Tone Multi-Frequency)
microphone that has a direct entry keypad.
This keypad microphone has three
programmable buttons (A, B, C) below the
keypad that can be programmed to
conveniently activate select radio features.
You are not transmitting
through a repeater
B
Emergency
OPTIONAL ENHANCED KEYPAD
MICROPHONE (RMN5029)
An Option Board has been
activated.
RADIO OVERVIEW
Symbol
DTMF
Keypad
Push-to-Talk
(PTT) button
Programmable
Buttons
(A, B, C)
13
English
01_Overview.fm Page 14 Monday, August 2, 2004 2:53 PM
RADIO OVERVIEW
The keypad is used for:
•
Dialing a phone number.
•
Entering information when programming
phone lists.
•
14
English
Entering Characters Using the DTMF
Microphone Keypad
Number of Times Button is Pressed
Button
1
2
3
Directly accessing preprogrammed features
(see page 17).
0
0
1
Each key can generate several different
characters. For example, to enter the
character “C,” press the 2 button three
times. (Refer to the Entering Characters
Using the DTMF Microphone Keypad
table.)
4
1
/
\
2
A
B
C
2
3
D
E
F
3
4
G
H
I
4
5
J
K
L
5
6
M
N
O
6
7
P
Q
R
S
8
T
U
V
8
9
W
X
Y
Z
*
*
<
>
#
#
+
-
_
5
7
9
01_Overview.fm Page 15 Thursday, August 5, 2004 5:08 PM
INDICATOR TONES
Low pitched tone
Self Test Pass Tone
Programmable
Buttons
Scan
Self Test Fail Tone
Positive Indicator Tone
Positive
Indicator Tone
Negative
Indicator Tone
Start
Stop
Power Level
High
Low
Squelch
Tight
Normal
Does not use
repeater
Uses repeater
Repeater/
Talkaround
Enabled
Disabled
Negative Indicator Tone
VOX
Local/Distance
Local
Distance
Sticky Monitor/
Open Squelch
—
Enabled
Good Key Press
Revert Memory
Channel (1&2)
—
Enabled
Store Memory
Channel (1&2)
—
Stored
Home Revert
AutoKey (1&2)
—
Enabled
Menu Mode
—
Accessed
Radio Call
—
Enabled
Scan List Edit
—
Enabled
Speed Dial
—
Enabled
Bad Key Press
RADIO OVERVIEW
High pitched tone
Some programmable buttons use tones to
indicate one of two modes:
D
15
English
RADIO OVERVIEW
01_Overview.fm Page 16 Friday, August 6, 2004 2:23 PM
Positive
Indicator Tone
Negative
Indicator Tone
Phone Mode
—
Enabled
Long Press — pressing and holding the
programmable buttons for a
preprogrammed period of time,
Option Board
Enabled
Disabled
or
Escalert
Enabled
Disabled
Programmable
Buttons
PROGRAMMABLE BUTTONS
Your radio has four programmable buttons.
Your dealer/programmer can program these
buttons as shortcuts to various radio features.
Check with your dealer/programmer for a
complete list of functions your radio supports.
Programmable buttons include:
•
The four front buttons (C, D, E, and
F).
•
The three buttons (A, B, and C) of the
optional DTMF microphone.
Some buttons can access up to two features,
depending on the type of button press:
•
Short Press — quickly pressing and
releasing the programmable buttons,
or
16
English
•
•
Hold Down — pressing and holding down
the programmable buttons while checking
status or making adjustments.
The table on page 17 summarizes the
programmable features available and shows
the page number where the feature is
explained.
In the “Button” column, have your dealer/
programmer record the name of the
programmable button next to the feature that
has been programmed to it.
The dealer/programmer can use the
abbreviations (P1, P2, P3, or P4) shown in the
radio illustration on page 11.
Also, where appropriate, have your dealer/
programmer indicate whether the button press
requires a short press, a long press, or needs
to be held down.
01_Overview.fm Page 17 Friday, August 6, 2004 2:23 PM
Menu Mode
Indicator
—
Short Press
Long Press
D button enters Menu Mode and selects
menu options. C button is automatically re-
Hold Down
Page Button
—
19
Sounds a tone
for adjusting
your radio’s
volume level.
21
Toggle silent monitor
Turn on open squelch
operation (also turn off monitor.
open squelch monitor
when it has been activated).
—
23
D
assigned to exit Menu Mode.†
Volume Set
—
Monitor
C
—
—
Repeater/
Talkaround
J
Toggle between using a repeater or transmitting
directly to another radio.†
—
25
Revert
Memory
Channel (1&2)
—
Provides direct channel/talkgroup access.†
—
25
—
25
—
26
Store Memory
Channel (1&2)
Home Revert
AutoKey (1&2)
†
—
—
Stores current
channel/talkgroup.
If a Revert Memory Channel is an LTR talkgroup,
the radio keys-up and transmits an MDC PTT ID.
If a Revert Memory Channel is a conventional
channel, it does not key-up.†
RADIO OVERVIEW
Programmable Features
Function
This function is activated by EITHER a short OR a long press, but not both.
17
English
RADIO OVERVIEW
01_Overview.fm Page 18 Friday, August 6, 2004 2:23 PM
Programmable Features (Continued)
Function
Local/Distance
—
Short Press
Long Press
Toggle between local mode and distance
mode.†
off.†
Hold Down
Page Button
—
26
—
26
Voice Operated Transmission (VOX)
—
Toggle VOX on and
Radio Call
—
Directly access the radio call menu.†
—
30,30
Scan/
Nuisance
Channel/
Talkgroup
Delete
G
Toggle scan on and off. Delete a nuisance channel/talkgroup while scanning.
—
34,
35
Edit Scan List
—
Directly access the Scan Edit menu to add,
delete, or prioritize channels/talkgroups.†
—
36
Phone
D
Directly access Phone mode.†
—
41,43
Speed Dial
D
Directly Access Phone mode to quickly access
phone list for speed dial.†
—
44
Escalert On/Off
—
Toggles escalert on and off.†
—
53
Squelch
—
Toggles squelch level between tight and normal
squelch.†
—
57
B
Toggle transmit power level between High and
Low.†
—
57
A
Toggle the option board on and off.†
—
58
Power Level
Option Board
†
18
English
Indicator
This function is activated by EITHER a short OR a long press, but not both.
01_Overview.fm Page 19 Friday, August 6, 2004 2:23 PM
MENU BUTTONS
If preprogrammed by your dealer/programmer,
the two front buttons (C and D) can be
used, in conjunction with other programmable
features, to access and select menu options
(D); and exit menu mode (C).
The D button can be preprogrammed by
your dealer/programmer to either a short or
long press to access the Menu Mode.
Menu Scroll Buttons
Used to scroll while in Menu Mode.
Refer to the menu navigation chart for
menu selectable features at the back of
this manual.
Exit the Menu
While in Menu Mode, the C button is
automatically assigned to completely exit the
Menu Mode by a long press or by a series of
short presses to exit from a sub-level of the
menu hierarchy.
The radio also exits the menu mode if there
have been no inputs via the navigation buttons
for the “Inactivity Time” or after a selection has
been made.
RADIO OVERVIEW
Menu Button
G or H to scroll through the sub-menu
options. Select the option with a short press of
the D button.
Once you have exited Menu Mode, the C
and D buttons return to normal
programmable condition.
Navigate the Menu
G or H to scroll through the menu options. If
you scroll past the last option, the selection
wraps around and starts again.
When you reach the required option, a short
press of the D button selects that option and
enters the Sub-menu.
19
English
RADIO OVERVIEW
01_Overview.fm Page 20 Friday, August 6, 2004 2:23 PM
Notes:
20
English
02_GetStarted.fm Page 21 Monday, August 2, 2004 2:58 PM
ADJUST THE VOLUME
GETTING STARTED
Turn the On/Off/Volume Control knob
clockwise to increase the volume, or
counterclockwise to decrease the volume.
TURN THE RADIO ON OR OFF
On/Off/Volume
Control Knob
– or –
PERS4
P
ON
OFF
Rotate the On/Off/
Volume Control knob
clockwise. If power-up
is successful, you will
hear the Self-Test Pass
Tone (
) and
see the green LED
indicator and display
icons light momentarily.
If the radio fails to
power up, you will hear
the Self Test Fail Tone
(
). The radio
will need to be returned
for re-programming.
Rotate the On/Off/
Volume Control knob
counterclockwise until
you hear a click and
both the display and
LED indicators turn off.
1
Hold down the Volume Set button (see
page 17).
•
You will hear a continuous tone.
2
Turn the On/Off/Volume Control knob to
the desired volume level.
3
Release the Volume Set button.
GETTING STARTED
Note: Your dealer/programmer can
preprogram one of the programmable
buttons to Volume Set.
21
English
02_GetStarted.fm Page 22 Monday, August 2, 2004 2:58 PM
SELECT AN LTR CHANNEL/
TALKGROUP
Your PM400 radio can be programmed with up
to 10 LTR sites and a maximum of 100
talkgroups, in total, across one or more sites
(up to a total of 10 sites).
GETTING STARTED
To select an LTR Channel/Talkgroup:
G or H to select the appropriate LTR channel/
1
Turn your radio on.
2
Adjust the radio’s volume, if necessary (see
page 21).
3
G or H to select the desired channel/
talkgroup.
talkgroup.
SELECT A CONVENTIONAL
CHANNEL
Up to a total of 64 channels can be
programmed into your radio.
Select a Channel
G or H to select the desired channel.
22
English
RECEIVE A CONVENTIONAL OR
LTR CALL
•
4
Listen for voice activity.
•
5
Make sure the PTT button is released.
The red LED indicator flashes while your
radio is receiving.
To respond, hold the microphone vertically 1
to 2 inches (2.5 to 5 cm) from your mouth.
Press the PTT button to talk; release it to
listen.
02_GetStarted.fm Page 23 Monday, August 2, 2004 2:58 PM
MONITOR
It is important to monitor traffic before
transmitting to ensure that you do not “talk
over” someone who is already transmitting.
Silent Monitor
1
A short press of the preprogrammed
Monitor button places the radio in Silent
Monitor mode.
GETTING STARTED
•
2
Note: Depending on how your radio has been
programmed, per channel for transmit
and receive conditions, when the
microphone has been taken off-hook,
the radio will go into Open Squelch
mode.
You hear a high-pitched tone.
A short press of the Monitor button cancels
Silent Monitor mode and returns the radio to
normal operation.
Open Squelch Monitor
1
To place the radio in Open Squelch mode,
press and hold the preprogrammed Monitor
button until you hear a high-pitched tone.
•
2
If no activity is present, you will hear
“white noise.”
Momentarily press the Monitor button to
return to normal operation.
23
English
02_GetStarted.fm Page 24 Monday, August 2, 2004 2:58 PM
TRANSMIT AN LTR CALL
1
2
GETTING STARTED
3
Hold the microphone in a vertical position at
a distance of about 1 to 2 inches
(2.5 to 5 cm) from your mouth.
1
Turn your radio on.
2
G or H to select the desired channel.
3
Hold the microphone vertically 1 to 2 inches
(2.5 to 5 cm) from your mouth. Press the
PTT button to talk.
Press and hold the PTT button.
–or–
Press and release the PTT button and wait 3
seconds.
•
If access to the trunked system was
successful, the red LED indicator lights
steady.
•
If access to the trunked system was
unsuccessful, the red LED indicator
flashes, indicating that the system was
busy or out-of-range.
4
With the PTT button depressed, speak
clearly into the microphone
5
Release the PTT button to listen.
24
English
G or H to select the appropriate LTR
channel/talkgroup.
TRANSMIT A CONVENTIONAL
CALL
•
4
The red LED indicator lights steady while
the call is being sent.
Release the PTT button to listen.
02_GetStarted.fm Page 25 Monday, August 2, 2004 2:58 PM
REPEATER OR TALKAROUND J
MODE
Talkaround Mode enables you to communicate
with another radio when either:
•
The repeater is not operating.
– or –
•
4
5
G or H until
TALKARND
– or – until
REPEATER
D to select the current setting.
REVERT MEMORY CHANNEL (1 & 2)
Note: The J symbol appears on the display
when Talkaround Mode is selected.
Select either Repeater Mode or Talkaround
Mode
Press the preprogrammed Repeater/
Talkaround button (see page 17) to toggle
between Repeater Mode and Talkaround Mode.
– or –
1
D to enter menu mode.
2
G or H until
3
D to select the current setting.
TALKARND
The Revert Memory Channel feature allows
you to instantly access up to two of your
favorite channels/talkgroups at the touch of a
button.
To Activate Revert Memory Channel
Press the preprogrammed Revert Memory
Channel 1 button or Revert Memory Channel
2 button (see page 17).
STORE MEMORY CHANNEL (1 & 2)
GETTING STARTED
Your radio is out of the repeater’s range but
within communicating distance of another
radio.
The Store Memory Channel feature allows you
to store a channel/talkgroup for the Revert
Memory Channel feature.
G or H to select the desired channel/
talkgroup. Press the preprogrammed Store
Memory Channel 1 button or Store Memory
Channel 2 button to store that channel/
talkgroup (see page 17).
25
English
02_GetStarted.fm Page 26 Friday, August 6, 2004 2:19 PM
HOME REVERT AUTOKEY (1 & 2)
If a Revert Memory Channel is an LTR
talkgroup, the Home Revert AutoKey feature
automatically keys-up and transmits an MDC
PTT ID. If a Revert Memory Channel is
programmed as a Conventional channel, the
radio will not key-up (see page 17).
GETTING STARTED
SET LOCAL OR DISTANCE MODE
Use this feature between Local mode (low
sensitivity) and Distance mode (normal
sensitivity). Local mode reduces interference
from other radios in close proximity. Distance
mode improves the radio’s range.
Press the preprogrammed Local/Distance
button (see page 17) to toggle between Local
and Distance mode.
Note: A voice activated external microphone
must be connected to your radio prior to
power-up of the radio in order to activate
the VOX feature.
To enable or disable VOX operation on a
channel/talkgroup, press the preprogrammed
VOX button (see page 18).
Note: Pressing the PTT button disables VOX.
– or –
You can select channels/talkgroups to enable
or disable VOX as preprogrammed by your
dealer/programmer.
1
has been preprogrammed to enable VOX.
VOX OPERATION
When hands-free operation is desired, your
radio can transmit by voice alone using the
VOX feature when you speak through a voice
activated external microphone that is
connected to your radio.
26
English
G or H to select a channel/talkgroup that
Note: Pressing the PTT button disables
VOX.
2
G or H to select a channel/talkgroup that
has not been preprogrammed to disable
VOX.
02_GetStarted.fm Page 27 Monday, August 2, 2004 3:43 PM
You can select channels/talkgroups to enable
or disable VOX as preprogrammed by your
dealer/programmer.
1
G or H to select a channel/talkgroup that
4
– or – until
TX XXX.X
D to select the current setting.
6
G or H to scroll through the standard
TPL frequencies or DPL codes.
– or –
G or H to select a channel/talkgroup that
Enter a non-standard or standard 4-digit
TPL frequency or the 3-digit octal code
(numbers 0-7 only) for DPL via the DTMF
microphone keypad.
has not been preprogrammed to disable
VOX.
PROGRAM PL/DPL CODES
7
D to confirm selection.
Use this feature to edit the Private-Line/Digital
Private-Line codes for a selected channel/
talkgroup.
8
C until you exit menu mode.
1
D to enter menu mode.
2
G or H until
EDIT PL
3
D to select
EDIT PL
GETTING STARTED
2
RX XXX.X
5
has been preprogrammed to enable VOX.
Note: Pressing the PTT button disables
VOX.
G or H until
27
English
02_GetStarted.fm Page 28 Monday, August 2, 2004 2:58 PM
GETTING STARTED
Notes:
28
English
03_RadioCall.fm Page 29 Monday, August 2, 2004 3:01 PM
RADIO CALLS
RECEIVE A SELECTIVE CALL F
(CONVENTIONAL OPERATION ONLY)
SELECTIVE RADIO INHIBIT
When you receive a Selective Call:
Your radio is equipped with a security feature
that can temporarily render the unit inoperative
when an inhibit signal is sent from the base
station.
This feature is commonly used to disable
radios:
•
The display shows F and the preprogrammed name or ID of the calling radio.
•
The yellow LED indicator flashes, if programmed by your dealer/programmer.
•
You hear two high-pitched tones.
•
In case of theft
•
When your vehicle is being serviced
•
For system control reasons
When your radio has been rendered
inoperative by the base station, all controls will
be inoperative except for the On/Off/Volume
knob and the display shows INHIBIT.
1
To acknowledge the call, press and release the
PTT button.
2
Press and hold the PTT button to talk; release
to listen.
RADIO CALLS
29
English
03_RadioCall.fm Page 30 Monday, August 2, 2004 3:01 PM
SEND A SELECTIVE CALL
(CONVENTIONAL OPERATION ONLY)
RADIO CALLS
You can send a Selective Call to a particular
radio or to a group of radios, as programmed
by your dealer/programmer.
Press the preprogrammed Radio Call button
(see page 18), and proceed to step 4.
– or –
Press the PTT button to send the call.
8
Press and hold the PTT button to talk; release
to listen.
9
When the call is completed,
C until you exit menu mode.
RECEIVE A CALL ALERT™ PAGE F
1
D to enter menu mode
(CONVENTIONAL OPERATION ONLY)
2
G or H until
RAD CALL
When you receive a Call Alert page:
3
D to select
RAD CALL
4
G or H until
5
D to select
6
G or H to locate the desired ID in the Call
•
The display shows F and the preprogrammed name or ID of the calling radio.
SEL CALL
•
The yellow LED indicator flashes, if programmed by your dealer/programmer.
SEL CALL
•
You hear four high-pitched tones.
List.
- or When using the enhanced keypad microphone, enter a valid DTMF digit to move to
that location in the list.
30
English
7
To acknowledge the page, press and release
the PTT button; to cancel the page, press any
other key.
03_RadioCall.fm Page 31 Monday, August 2, 2004 3:59 PM
SEND A CALL ALERT PAGE
(CONVENTIONAL OPERATION ONLY)
You can alert another person by sending a Call
Alert page.
Press the preprogrammed Radio Call button
(see page 18) and proceed to step 4.
– or –
1
D to enter menu mode
2
G or H until
RAD CALL
3
D to select
RAD CALL
4
G or H until
CALL ALT
5
D to select
CALL ALT
6
G or H to locate the desired ID in the Call
8
When the page is completed,
C until you exit menu mode.
REPEATER ACCESS
Use with Enhanced Keypad Microphone
(RMN5029)
Use this feature to send DTMF tones to a
repeater.
1
Press and hold the PTT button and enter
your access code using the DTMF keypad.
2
Press and release the required DTMF buttons.
3
Release the microphone’s PTT button.
RADIO CALLS
List.
- or When using the enhanced keypad microphone, enter a valid DTMF digit to move to
that location in the list.
7
Press the PTT button to send the page.
31
English
03_RadioCall.fm Page 32 Thursday, August 5, 2004 5:17 PM
RADIO CHECK
Radio Check allows you to determine if a radio
is within the range of the trunked system and
turned on, without disturbing the user of that
radio. This feature can also be used when
attempts with Selective Call and Call Alert fail.
EMERGENCY ALERTS E
Your radio offers choices for initiating and
responding to Emergency Alert
communications. An Emergency Alert can be
programmed to:
•
Show E and sound a tone
–or–
•
Show the normal display
–or–
RADIO CALLS
•
32
English
Activate the microphone so that all activity
can be transmitted (for a predetermined
amount of time). See your dealer/
programmer for more information.
All emergency features are preprogrammed.
See your dealer/programmer for further
information on the emergency features that are
available.
SEND AN EMERGENCY ALERT E
A priority Emergency Alert can be sent to a
specific radio or dispatch center by pressing
either a foot switch or a push button accessory.
•
The display shows:
EMER IN
Note: Emergency alerts have priority over all
other calls.
CLEAR AN EMERGENCY ALERT
An Emergency Alert can be cleared by long
pressing either a foot switch or a push button
accessory.
04_Scan.fm Page 33 Monday, August 2, 2004 3:09 PM
SCAN
•
The green LED indicator blinks during scan
mode; it stops blinking when the radio
switches to an active channel/talkgroup.
•
The Gsymbol appears on the display
while in scan mode.
•
Your dealer/programmer can preprogram
your radio where if the microphone is taken
off-hook while in Scan mode, the scanning
activity becomes suspended until the
microphone is replaced.
•
System Scan (manual)
•
Auto Scan (automatic)
TALKBACK
The Talkback feature allows you to respond to
a transmission while scanning. If transmission
is detected on a channel/talkgroup while
scanning, the radio will stop and land on that
channel/talkgroup for a preprogrammed period
of time after activity has ceased. This is
referred to as “hangtime”. During this hangtime
you may respond by pressing the PTT button.
SCAN
Your radio is equipped with the Scan feature,
which allows you to search for, lock onto, and
monitor voice activity on channels/talkgroups.
Scan lists are assigned per channel/talkgroup,
by your dealer/programmer. Your radio
automatically switches to a channel/talkgroup,
within that scan list, when it detects activity.
You can also edit these lists through your
radio’s menu (see page 36).
There are two ways that your radio scans:
Note: The LED scan indicator stops blinking
while the radio is in hangtime. If the PTT
button is not pressed during the preprogrammed hangtime, the radio reverts
back to scan.
33
English
SCAN
04_Scan.fm Page 34 Monday, August 2, 2004 3:09 PM
START SYSTEM SCAN G
STOP SYSTEM SCAN
Press the preprogrammed Scan button to start
System Scan (see page 18).
– or –
Press the preprogrammed Scan button to stop
System Scan (see page 18).
– or –
1
G or H to select a channel/talkgroup that
contains a Scan list.
2
D to enter menu mode.
3
G or H until
SYS
SCAN
4
D to select
SYS
SCAN
The display shows the current scan status.
5
G or H until
6
D to select the current setting.
SCAN ON
1
D to enter menu mode.
2
G or H until
SYS
SCAN
3
D to select
SYS
SCAN
The display shows the current scan status.
4
G or H until
5
D to select the current setting.
•
SCAN OFF
The Gsymbol disappears from the
display.
Note: Your dealer/programmer can preprogram
your radio when exiting System Scan to
automatically revert to the last scan
channel/talkgroup that had activity on it
or to automatically revert to the channel/
talkgroup where scan was initiated.
34
English
04_Scan.fm Page 35 Monday, August 2, 2004 3:09 PM
START AUTO SCAN G
STOP AUTO SCAN
G or H to select a channel/talkgroup that
has not been preprogrammed for Auto Scan by
your dealer/programmer.
•
The Gsymbol disappears from the
display.
DELETE A NUISANCE CHANNEL/
TALKGROUP
1
While the radio is on the nuisance channel/
talkgroup, press the preprogrammed Nuisance Channel Delete button until you hear a
tone.
2
Release the Nuisance Channel Delete button. The nuisance channel/talkgroup is
deleted.
SCAN
Auto Scan automatically starts scanning once
a channel/talkgroup with Auto Scan enabled is
selected.
G or H to select a channel/talkgroup that
has been preprogrammed for Auto Scan by
your dealer/programmer.
Note: You cannot temporarily delete the channel/talkgroup that has been preprogrammed by your dealer/programmer as
your designated scan channel/talkgroup, a priority channel/talkgroup, or
the last remaining channel/talkgroup in
the scan list.
Note: Your dealer/programmer must preprogram a button to Nuisance Delete to
access this feature.
If a channel/talkgroup continually generates
unwanted calls or noise (a “nuisance” channel/
talkgroup), you can temporarily remove it from
the scan list:
35
English
04_Scan.fm Page 36 Monday, August 2, 2004 3:09 PM
SCAN
Restore Channels/Talkgroups to the Scan
List
1
Power off the radio. Once the radio is powered
on again, the deleted nuisance channels/talkgroups are restored to the scan list.
–or–
2
Press the preprogrammed Scan button to stop
the scan.
3
Press the preprogrammed Scan button again
to start scanning again. The deleted nuisance
channels/talkgroups are restored to the scan
list.
– or –
4
G or H to select a channel/talkgroup that
has not been preprogrammed by your dealer/
programmer to stop Scan. Once you return to
the original channel/talkgroup, the deleted nuisance channels/talkgroups are restored to the
scan list.
36
English
EDIT A SCAN LIST
Your radio can support up to 16 Scan lists.
Each Scan list can contain up to a combination
of 16 channels/talkgroups. The same channel/
talkgroup can be included in several Scan lists,
and the same Scan list can be assigned to
several channels/talkgroups. Scan lists are
assigned per channel/talkgroup, by your
dealer/programmer. When you edit a Scan list,
you can either add, delete, or prioritize
channels/talkgroups.
Note: Your radio cannot receive any calls
while you are editing a Scan list.
04_Scan.fm Page 37 Monday, August 2, 2004 3:09 PM
ADD OR DELETE CHANNELS/
TALKGROUPS IN A SCAN LIST
G or H to select a channel/talkgroup that
11 If you added a channel/talkgroup,
contains a Scan list you want to edit.
2
D to enter menu mode.
3
G or H until
PROG LST
4
D to select
PROG LST
5
G or H until
SCAN LST
Note: One Scan list per channel/talkgroup is
available.
6
D to select
SCAN LST
7
G or H until
ADD ITEM
D to confirm your selection.
you see:
– or –
SCAN
1
10
ADDED
If you delete a channel/talkgroup,
you see:
12
13
14
DELETE
D to confirm the deletion.
you see:
DELETED
C to return to
ADD ITEM
– or –
DELETE
C until you exit menu mode.
DELETE
– or – until
8
D to select the current setting.
9
G or H until you see the channel/talkgroup
you want to add or delete.
37
English
04_Scan.fm Page 38 Monday, August 2, 2004 3:09 PM
SCAN
PRIORITIZE A CHANNEL/
TALKGROUP IN A SCAN LIST
You may want to check the activity on one or
two channels/talkgroups more frequently than
others. You can do this by prioritizing them:
Priority
Channel/
Talkgroup
Scanning Sequence
Set Priority Channels/Talkgroups
Note: You cannot have the same priority on
two different channels/talkgroups.
1
D to enter menu mode.
2
G or H until
PROG LST
3
D to select
PROG LST
None specified
Ch1➠Ch2➠Ch3➠
Ch4➠…Ch1
Channel/
Talkgroup 2
(Priority 1)
Ch2➠Ch1➠Ch2➠Ch3➠
Ch2➠Ch4➠Ch2➠…Ch1
4
G or H until
SCAN LST
5
D to select
SCAN LST
Channel/
Talkgroup 2
(Priority 1) and
Channel/
Talkgroup 8
(Priority 2)
Ch2➠Ch1➠Ch8➠Ch3➠
Ch2➠Ch4➠Ch8➠…Ch1
6
G or H until
EDIT PRI
7
D to select
EDIT PRI
8
G or H until
PRI #1
– or – until
PRI #2
Note: If you are receiving on a non-priority
channel/talkgroup and traffic becomes
active on a priority channel/talkgroup,
your radio will automatically switch to
38
English
that priority channel/talkgroup and indicate the activity with a short tone.
9
D to select the desired priority level.
You see the current priority channel/talkgroup.
04_Scan.fm Page 39 Monday, August 2, 2004 3:09 PM
10
G or H until you see the channel/talkgroup
you want to prioritize.
SELECTED
– or – until
to de-prioritize the
current channel/talkgroup the radio is on.
DISABLED
SCAN
11
– or – until
to select the current
channel/talkgroup the
radio is on.
D to prioritize that channel/talkgroup.
you see:
SAVED
12
C to return to
EDIT PRI
13
C until you exit menu mode.
39
English
04_Scan.fm Page 40 Monday, August 2, 2004 3:09 PM
SCAN
Notes:
40
English
05_Phone.fm Page 41 Monday, August 2, 2004 3:22 PM
PHONE
Your radio allows you to place and receive
telephone calls through a repeater (depending
on phone line availability). You can edit the
phone list through your radio’s menu (see
page 44).
The phone feature is available in both
conventional and LTR systems.
•
D appears on the display when you are in
Phone mode.
RECEIVE A PHONE CALL D
When a phone call is received, a ringing tone
sounds, alerting you to answer the phone call.
Press the preprogrammed Phone button (see
page 18), and skip to step 6.
– or –
Press the PTT button, and if the Hot Keypad
feature has been preprogrammed by your
dealer/programmer, do the following:
1
G or H to select a channel/talkgroup that
has been programmed for telephone.
2
D to enter menu mode.
3
G or H until
PHONE
4
D to select
PHONE
PHONE
Your dealer/programmer can preprogram your
radio in one of three ways to enter your
access/de-access code to the repeater.
Immediate Auto – your radio will transmit the
access/deaccess code automatically upon
entering phone mode or disconnecting a
phone call. You will hear a series of tones, and
see your access/deaccess code on the display,
indicating that an access/deaccess code is
being sent automatically.
Delayed Auto – your radio will transmit the
access code upon a PTT button press. The deaccess code is sent automatically when you
exit phone mode.
Manual - Enter your access/deaccess code
using the DTMF microphone keypad and press
the PTT button.
Note: The D appears on the display.
41
English
05_Phone.fm Page 42 Monday, August 2, 2004 3:22 PM
5
Your dealer/programmer can preprogram your
radio in one of three ways to enter your
access code to the repeater.
7
If your radio has Immediate Auto or Delayed
Auto programmed, go to step 8.
– or –
Immediate Auto – automatically sends the
access code.
Enter the deaccess code using the DTMF
microphone keypad and press the PTT
button.
Delayed Auto – your radio will transmit the
access code upon a PTT button press.
PHONE
Manual - Enter your access code using the
DTMF microphone keypad and press the PTT
button.
6
42
English
Hold the microphone 1 to 2 inches (2.5 to
5 cm) away from your mouth. Press and hold
the PTT button to talk. Release the PTT button when the other party wants to talk, both
parties will need to speak in turn.
To disconnect a phone call, do one of the
following:
8
To exit Phone Mode:
Press the preprogrammed Phone button (see
page 18).
– or –
Press and hold C to disconnect the call.
Note: D disappears from the display.
05_Phone.fm Page 43 Monday, August 2, 2004 3:22 PM
MAKE A PHONE CALL D
5
Press the preprogrammed Phone button (see
page 18), and skip to step 6.
– or –
Immediate Auto – automatically sends the
access code.
Press the PTT button, and if the Hot Keypad
feature has been preprogrammed by your
dealer/programmer, do the following:
1
Delayed Auto – your radio will transmit the
access code upon a PTT button press.
Manual - Enter your access code using the
DTMF microphone keypad and press the PTT
button.
G or H to select a channel/talkgroup that
has been programmed for telephone.
D to enter menu mode.
3
G or H until
PHONE
4
D to select
PHONE
Note: The D appears on the display.
6
When you hear a dial tone:
Enter the phone
number using the
DTMF microphone
keypad.
The number will scroll
to the left,
– or –
XXXXXXX
G or H to select a
number from the
phone list.
XXXXXXXX
PHONE
2
Your dealer/programmer can preprogram your
radio in one of three ways to enter your
access code to the repeater.
Note: Only the first 8 digits are displayed.
– or –
43
English
05_Phone.fm Page 44 Monday, August 2, 2004 3:22 PM
9
a. Press and release the preprogrammed
Speed Dial button.
If your radio has Immediate Auto or Delayed
Auto programmed, go to step 10.
– or –
b. Press the key (0 to 9) corresponding to
the number you want to call.
Note: To redial the last number dialed (if not
using Speed Dial), press and release
the PTT button immediately after the
access code is sent. The radio sends
the last number dialed.
PHONE
Press and release the PTT button, if required
for your radio.
8
Hold the microphone 1 to 2 inches (2.5 to
5 cm) away from your mouth. Press and hold
the PTT button to talk. Release the PTT button when the other party wants to talk, both
parties will need to speak in turn.
44
English
Enter the deaccess code using the DTMF
microphone keypad and press the PTT
button.
10 To exit Phone Mode:
Press the preprogrammed Phone button (see
page 18).
– or –
If you entered your access code using
the DTMF keypad, press G once to
access the last number dialed; then
press and release the PTT button.
7
To disconnect a phone call, do one of the
following:
– or –
Press and hold C to disconnect the call.
Note: D disappears from the display.
EDIT THE PHONE LIST
Your radio contains a Phone list that holds up
to 25 phone numbers. You can edit the Phone
list in three ways through your radio’s menu:
•
Add an entry
•
Delete an entry
•
Edit an existing entry
05_Phone.fm Page 45 Monday, August 2, 2004 3:22 PM
Add an Entry
10 Use the DTMF microphone keypad to enter
D to enter menu mode.
2
G or H until
PROG LST
3
D to select
PROG LST
4
G or H until
PHN LST
5
D to select
PHN LST
6
G or H until
ADD ITEM
7
D to select,
ADD ITEM
you see:
NAME
8
Use the DTMF microphone keypad to enter
the name (see Entering Characters Using the
DTMF Microphone Keypad on page 14).
9
D to store the name,
you see:
the phone number. You can also add a Pause
Indicator by holding # until ‘P’ appears on
the display.
11
D to store the phone number.
you see:
LOC XX
12
G or H until you see the location in the list
where you want to store the phone number.
13
D to store the location.
14
you see:
SAVED
C to return to
– or –
ADD ITEM
PHONE
1
C until you exit menu mode.
Delete an Entry
NUMBER
1
D to enter menu mode.
2
G or H until
PROG LST
3
D to select
PROG LST
45
English
05_Phone.fm Page 46 Monday, August 2, 2004 3:22 PM
4
G or H until
PHN LST
5
D to select
PHN LST
6
G or H until
DELETE
7
D to select
DELETE
8
G or H until you see the entry you want to
delete.
PHONE
9
D to select the entry,
you see:
10
11
DELETE
D again to confirm the deletion,
you see:
DELETED
C to return to
DELETE
– or –
C until you exit menu mode.
46
English
Edit an Entry
1
D to enter menu mode.
2
G or H until
PROG LST
3
D to select
PROG LST
4
G or H until
PHN LST
5
D to select
PHN LST
6
G or H until
EDIT
7
D to select
EDIT
8
G or H until you see the entry you want to
edit.
9
D to select the entry.
05_Phone.fm Page 47 Monday, August 2, 2004 3:48 PM
10
G or H until
NAME
14
(to edit the name),
– or – until
(to edit the phone
number),
11
C until you exit menu mode.
NUMBER
Edit Access/Deaccess Codes
LOC
D to confirm your selection.
entry (see Entering Characters Using the
DTMF Microphone Keypad on page 14),
– or –
G or H until you see the location where
you want to store the phone number.
13 D to store the information.
SAVED
You can edit the access/de-access codes that
are used to connect or disconnect you from a
repeater.
1
D to enter menu mode.
2
G or H until
PROG LST
3
D to select
PROG LST
4
G or H until
PHN LST
5
D to select
PHN LST
6
G or H until
EDT
CODE
7
D to select
EDT
CODE
PHONE
12 Use the DTMF microphone keypad to edit the
you see:
EDIT
– or –
– or – until
(to edit the location in
the phone list).
C to return to
47
English
05_Phone.fm Page 48 Monday, August 2, 2004 3:22 PM
8
G or H until
– or – until
9
ACCESS
DEACCESS
D to select the current setting.
10 Enter the number using the DTMF keypad
microphone.
PHONE
11
you see:
SAVED
12
G or H to edit another code.
13
C until you exit menu mode.
48
English
D to select the entry.
06_Tone.fm Page 49 Monday, August 2, 2004 3:46 PM
TONE PREFERENCES
You can use the radio’s menu to access useradjustable settings to customize the tones on
your radio by:
1
D to enter menu mode.
2
G or H until
TONES
3
D to select
TONES
4
G or H until you see the feature you want
to change (see the table on page 50).
5
D to select the feature. You see the
feature’s current setting.
G or H to see a list of available settings.
7
D to select the desired setting.
8
C until you exit the menu mode.
TONE PREFERENCES
6
49
English
06_Tone.fm Page 50 Monday, August 2, 2004 3:46 PM
Tone Settings
Feature
TONE
What it Does
Turns all alert tones on or off.
Settings
ON
OFF
KPD
TONE
Turns the keypad tones on or off.
ON
OFF
TONE TAG
TONE PREFERENCES
ESCALERT
50
English
Assigns a specific tone when receiving a specific type of
radio call.
STANDARD
Increases the volume of the alarm tones when a radio
call is not answered.
ON
ALERT 1 – 6
OFF
06_Tone.fm Page 51 Monday, August 2, 2004 3:46 PM
TONES ON/OFF
KEYPAD ON/OFF TONES
You can program your radio to enable or
disable all alert tones.
You can program your radio to enable or
disable all keypad tones.
1
D to enter Menu mode.
2
G or H until
TONES
3
D to select
TONES
4
G or H until
TONE
5
D to select
TONE
6
G or H until
ON
– or – until
D to select the desired setting.
1
D to enter Menu mode.
2
G or H until
TONES
3
D to select
TONES
4
G or H until
KPD TONE
5
D to select
KPD TONE
6
G or H until
ON
– or – until
7
TONE PREFERENCES
7
OFF
Note: Tones for the programmable buttons
C, D, E, and F can not be disabled.
OFF
D to select the desired setting.
51
English
06_Tone.fm Page 52 Monday, August 2, 2004 3:46 PM
CALL TONE TAGGING
(CONVENTIONAL OPERATION ONLY)
You can program your radio to sound a
particular alert tone when receiving a Selective
Call or Call Alert (call tone tagging).
TONE PREFERENCES
Note: Seven alert tones are available to select
from in the list.
1
D to enter menu mode.
2
G or H until
TONES
3
D to select
TONES
4
G or H until
TONE
TAG
5
D to select
TONE
TAG
6
G or H until
CALL ALT
– or – until
7
52
English
SEL
CALL
D to select the desired setting.
8
G or H until you see and hear the tone you
want to use for this type of call.
9
D to select the desired setting,
you see:
TONE
SET
10
C to return to
TONE
TAG
11
C until you exit the menu mode.
06_Tone.fm Page 53 Monday, August 2, 2004 3:46 PM
ESCALERT
(CONVENTIONAL OPERATION ONLY)
You can program your radio to increase the
volume of the alarm tones when a radio call is
not answered.
Press the preprogrammed Escalert button
(see page 18) and proceed to step 5.
– or –
D to enter menu mode.
2
G or H until
TONES
3
D to select
TONES
4
G or H until
ESCALERT
5
D to select
ESCALERT
6
G or H until
ON
– or – until
7
TONE PREFERENCES
1
OFF
D to select the desired setting.
53
English
06_Tone.fm Page 54 Monday, August 2, 2004 3:46 PM
TONE PREFERENCES
Notes:
54
English
07_Utilities.fm Page 55 Monday, August 2, 2004 3:49 PM
USER SETTINGS
USER SETTINGS
You can use the radio’s menu to access useradjustable settings to customize some of your
radio features by:
1
D to enter menu mode.
2
G or H until
UTILITY
3
D to select
UTILITY
4
G or H until you see the feature you want
to change (see the table on page 56).
5
D to select the feature. You see the feature’s current setting.
6
G or H for available settings.
7
D to select the desired setting.
55
English
07_Utilities.fm Page 56 Monday, August 2, 2004 3:49 PM
USER SETTINGS
Utilities Features
Feature
What it Does
Settings
SQUELCH
Changes the squelch of the radio to tight or normal.
TIGHT
NORMAL
PWR LVL
Changes the power level of the radio to high or low.
HIGH
LOW
OPT BRD
Enables or disables an option board.
ON
OFF
BKLT
INT
SOFTWARE
56
English
Changes the brightness of the backlight.
HIGH
MED
LOW
Displays the radio’s software version number.
XX’XX’XX
07_Utilities.fm Page 57 Monday, August 2, 2004 3:49 PM
SET SQUELCH LEVEL
1
D to enter menu mode.
2
G or H until
UTILITY
3
D to select
UTILITY
4
G or H until
SQUELCH
5
D to select
SQUELCH
6
G or H until
-or - until
7
NORMAL
USER SETTINGS
Use this feature to filter out nuisance
(unwanted) calls and/or background noise.
However, tightening squelch could cause calls
from remote locations to be filtered out as well.
In this case, normal squelch may be more
desirable.
Press the preprogrammed Squelch button
(see page 18) to toggle between tight and
normal squelch.
– or –
TIGHT
D to select the current setting.
SET POWER LEVEL B
Each channel/talkgroup in your radio has a
predefined transmit power level that can be
changed.
• High power (S) allows you to reach a radio
that is farther away.
• Low power (R) to reach a radio within close
proximity.
Note: The R or S symbol appears on the
display when High/Low Power Level is
selected.
To set the power level, press the
preprogrammed Power Level button (see
page 18) to toggle between low and high
power.
57
English
07_Utilities.fm Page 58 Monday, August 2, 2004 3:49 PM
OPTION BOARD ON/OFF A
USER SETTINGS
– or –
Use this feature to enable or disable an option
board.
1
D to enter menu mode.
2
G or H until
UTILITY
3
D to select
UTILITY
4
G or H until
PWR LVL
5
D to select
PWR LVL
6
G or H until
HIGH
1
D to enter menu mode.
LOW
2
G or H until
UTILITY
3
D to select
UTILITY
4
G or H until
OPT BRD
5
D to select
OPT BRD
6
G or H until
ON
-or - until
7
D to select the current setting.
The A symbol appears on the display
when the option board feature is On.
•
Press the preprogrammed Option Board
button (see page 18) to toggle the option board
on or off.
– or –
-or- until
7
58
English
OFF
D to select the current setting.
07_Utilities.fm Page 59 Monday, August 2, 2004 3:49 PM
DISPLAY THE SOFTWARE VERSION
Use this feature to change the brightness of
the backlight.
Use this feature to view the current software
version of your radio.
1
D to enter menu mode.
1
D to enter menu mode.
2
G or H until
UTILITY
2
G or H until
UTILITY
3
D to select
UTILITY
3
D to select
UTILITY
4
G or H until
BKLT
INT
4
G or H until
SOFTWARE
5
D to select
BKLT
INT
5
D to view the software version.
6
G or H until
HIGH
6
C until you exit menu mode.
-or- until
USER SETTINGS
SET THE BACKLIGHT INTENSITY
MED
LOW
-or- until
7
D to select the current setting.
59
English
07_Utilities.fm Page 60 Monday, August 2, 2004 3:49 PM
USER SETTINGS
Notes:
60
English
08_Warranty.fm Page 61 Monday, August 2, 2004 10:36 AM
WARRANTY
LIMITED WARRANTY
MOTOROLA COMMUNICATION
PRODUCTS
I. WHAT THIS WARRANTY COVERS AND
FOR HOW LONG:
PM400 Mobile Units
Two (2) Years
Product Accessories
One (1) Year
Motorola, at its option, will at no charge either
repair the Product (with new or reconditioned
parts), replace it (with a new or reconditioned
Product), or refund the purchase price of the
Product during the warranty period provided it is
returned in accordance with the terms of this
warranty. Replaced parts or boards are warranted
for the balance of the original applicable warranty
MOTOROLA cannot be responsible in any way
for any ancillary equipment not furnished by
MOTOROLA which is attached to or used in
connection with the Product, or for operation of
the Product with any ancillary equipment, and all
such equipment is expressly excluded from this
warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims
liability for range, coverage, or operation of the
system as a whole under this warranty.
WARRANTY
MOTOROLA INC. (“MOTOROLA”) warrants the
MOTOROLA manufactured Communication
Products listed below (“Product”) against defects
in material and workmanship under normal use
and service for a period of time from the date of
purchase as scheduled below:
period. All replaced parts of Product shall become
the property of MOTOROLA.
This express limited warranty is extended by
MOTOROLA to the original end user purchaser
only and is not assignable or transferable to any
other party. This is the complete warranty for the
Product manufactured by MOTOROLA.
MOTOROLA assumes no obligations or liability
for additions or modifications to this warranty
unless made in writing and signed by an officer
of MOTOROLA. Unless made in a separate
agreement between MOTOROLA and the
original end user purchaser, MOTOROLA does
not warrant the installation, maintenance or
service of the Product.
61
English
08_Warranty.fm Page 62 Monday, August 2, 2004 10:36 AM
II. GENERAL PROVISIONS:
WARRANTY
This warranty sets forth the full extent of
MOTOROLA'S responsibilities regarding the
Product. Repair, replacement or refund of the
purchase price, at MOTOROLA’s option, is the
exclusive remedy. THIS WARRANTY IS GIVEN
IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY. IN NO EVENT SHALL
MOTOROLA BE LIABLE FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL
LOSS, LOST PROFITS OR SAVINGS OR
OTHER INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT
OF THE USE OR INABILITY TO USE SUCH
PRODUCT, TO THE FULL EXTENT SUCH MAY
BE DISCLAIMED BY LAW.
III. STATE LAW RIGHTS:
SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL
62
English
OR CONSEQUENTIAL DAMAGES OR
LIMITATION ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE
LIMITATION OR EXCLUSIONS MAY NOT
APPLY.
This warranty gives specific legal rights, and there
may be other rights which may vary from state to
state.
IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the
date of purchase and Product item serial
number) in order to receive warranty service and,
also, deliver or send the Product item,
transportation and insurance prepaid, to an
authorized warranty service location. Warranty
service will be provided by Motorola through one
of its authorized warranty service locations. If you
first contact the company which sold you the
Product (e.g., dealer or communication service
provider), it can facilitate your obtaining warranty
service. You can also call Motorola at 1-800-9272744 US/Canada.
08_Warranty.fm Page 63 Monday, August 2, 2004 10:36 AM
V. WHAT THIS WARRANTY DOES NOT
COVER:
A)
B)
C)
D)
F)
G)
the damage or defect is caused by
charging or using the battery in
equipment or service other than the
Product for which it is specified.
H) Freight costs to the repair depot.
I) A Product which, due to illegal or
unauthorized alteration of the software/
firmware in the Product, does not function in
accordance with MOTOROLA’s published
specifications or the FCC type acceptance
labeling in effect for the Product at the time
the Product was initially distributed from
MOTOROLA.
J) Scratches or other cosmetic damage to
Product surfaces that does not affect the
operation of the Product.
K) Normal and customary wear and tear.
WARRANTY
E)
Defects or damage resulting from use of the
Product in other than its normal and
customary manner.
Defects or damage from misuse, accident,
water, or neglect.
Defects or damage from improper testing,
operation, maintenance, installation,
alteration, modification, or adjustment.
Breakage or damage to antennas unless
caused directly by defects in material
workmanship.
A Product subjected to unauthorized
Product modifications, disassembles or
repairs (including, without limitation, the
addition to the Product of non-Motorola
supplied equipment) which adversely affect
performance of the Product or interfere with
Motorola's normal warranty inspection and
testing of the Product to verify any warranty
claim.
Product which has had the serial number
removed or made illegible.
Rechargeable batteries if:
1) any of the seals on the battery
enclosure of cells are broken or show
evidence of tampering.
2)
VI.PATENT AND SOFTWARE PROVISIONS:
MOTOROLA will defend, at its own expense, any
suit brought against the end user purchaser to
the extent that it is based on a claim that the
Product or parts infringe a United States patent,
and MOTOROLA will pay those costs and
damages finally awarded against the end user
purchaser in any such suit which are attributable
to any such claim, but such defense and
payments are conditioned on the following:
63
English
08_Warranty.fm Page 64 Monday, August 2, 2004 10:36 AM
WARRANTY
A) that MOTOROLA will be notified promptly in
writing by such purchaser of any notice of
such claim;
B) that MOTOROLA will have sole control of the
defense of such suit and all negotiations for
its settlement or compromise; and
C) should the Product or parts become, or in
MOTOROLA’s opinion be likely to become,
the subject of a claim of infringement of a
United States patent, that such purchaser
will permit MOTOROLA, at its option and
expense, either to procure for such
purchaser the right to continue using the
Product or parts or to replace or modify the
same so that it becomes non-infringing or to
grant such purchaser a credit for the Product
or parts as depreciated and accept its return.
The depreciation will be an equal amount
per year over the lifetime of the Product or
parts as established by MOTOROLA.
MOTOROLA will have no liability with respect to
any claim of patent infringement which is based
upon the combination of the Product or parts
furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will
MOTOROLA have any liability for the use of
ancillary equipment or software not furnished by
MOTOROLA which is attached to or used in
connection with the Product. The foregoing
64
English
states the entire liability of MOTOROLA with
respect to infringement of patents by the Product
or any parts thereof.
Laws in the United States and other countries
preserve for MOTOROLA certain exclusive rights
for copyrighted MOTOROLA software such as
the exclusive rights to reproduce in copies and
distribute copies of such Motorola software.
MOTOROLA software may be used in only the
Product in which the software was originally
embodied and such software in such Product
may not be replaced, copied, distributed,
modified in any way, or used to produce any
derivative thereof. No other use including,
without limitation, alteration, modification,
reproduction, distribution, or reverse engineering
of such MOTOROLA software or exercise of
rights in such MOTOROLA software is permitted.
No license is granted by implication, estoppel or
otherwise under MOTOROLA patent rights or
copyrights.
VII. GOVERNING LAW:
This Warranty is governed by the laws of the
State of Illinois, USA.
09_Accessory.fm Page 65 Monday, August 2, 2004 10:37 AM
ACCESSORIES
Motorola offers a number of accessories to
enhance the productivity of your two-way
radio. Many of the available accessories are
listed below.
HAE4010
UHF 406-420 MHz, 3.5 dB Gain
Roof Mount
HAE4011
UHF 450-470 MHz, 3.5 dB Gain
Roof Mount
RAE4004_RB UHF 445-470 MHz, 5 dB Gain
Roof Mount
ANTENNAS
RAE4004_MB UHF 445-470 MHz, 5 dB Gain
Magnetic Mount
HAD4006
VHF 136-144 MHz, 1/4 Wave Roof
Mount
TAE6053
HAD4007
VHF 144-150.8 MHz, 1/4 Wave
Roof Mount
ALARM AND ACCESSORIES
HAD4008
VHF 150.8-162 MHz, 1/4 Wave
Roof Mount
RLN4856
Footswitch with Remote PTT
VHF 162-174 MHz, 1/4 Wave Roof
Mount
RLN4857
Pushbutton with Remote PTT
RLN4858
Gooseneck PTT
RLN4836
External PTT with Emergency
Footswitch
HLN9328
External Alarm Relay (used in
conjunction with GLN7282)
GLN7282
Buzzer Kit (used in conjunction
with HLN9328)
HAD4009
UHF 430-450 MHz, 1/4 Wave Roof
Mount
VHF 136-174 MHz, 3 dB Gain (no
mount)
HAD4014
VHF 140-174 MHz, 3.5 dB Gain
Roof Mount
HAE4002
UHF 403-430 MHz, 1/4 Wave Roof
Mount
HAE4003
UHF 450-470 MHz, 1/4 Wave Roof
Mount
AUDIO
HAE4004
UHF 470-512 MHz, 1/4 Wave Roof
Mount
HMN3596
Standard Microphone
HMN1035
Heavy Duty Microphone
ACCESSORIES
RAD4000
65
English
09_Accessory.fm Page 66 Monday, August 2, 2004 10:37 AM
RMN5029
Enhanced Keypad Microphone
CONTROL STATION
RMN5018
Mag One Microphone (Low Cost)
(6 months warranty only)
HPN4002
Desktop Power Supply 1-25 W
RMN5019
Mag One Keypad Microphone
(Low Cost)
(6 months warranty only)
HPN4001
Desktop Power Supply 25-60 W
HMN3000 Black Desk Microphone
AAREX4617
Telephone Style Handset Kit
GMMN4065
Visor Microphone (Omni-Direction)
AARMN4027
Visor Microphone - High Noise
(Uni-Direction)
RSN4001
External Speaker 13 W
HSN8145
External Speaker 7.5 W
HLN9073
Microphone Hang-up Clip (requires
install)
HLN9414
Microphone Hang-up Clip (Universal - no install required)
ACCESSORIES
CABLES
Desktop Tray with Speaker
RLN5391
Desktop Tray without Speaker
DATA - CES WIRELESS
TECHNOLOGIES
RDN7364
Base Modem
RDN7367
Mobile Display Terminal with GPS
RDN7368
Mobile Display Terminal
RDN7369
Stand Alone Modem with GPS
RDN7370
Interface Cable, 3 ft
RDN7376
Interface Cable, 15 ft
RDN7372
Fixed Mount GPS Active Antenna
RDN7373
Mobile Printer
Programming Software for CES
Equipment
HKN9327
Ignition Switch Cable
HKN4137
Low Power Cable to Battery (1-25 W)
RDN7374
HKN4191
High Power Cable to Battery (25-60
W)
RDN7380
Mobile Programming Hardware
RDN7375
Magnetic Mount GPS Antenna
66
English
RLN5390
RDN7377
MAPS (US) Regional
RDN7378
AVL Messaging Statue Software
09_Accessory.fm Page 67 Wednesday, September 1, 2004 4:47 PM
RDN7371
Credit Card Reader
RDN7738
Serial Breakout Unit (multiple
modems)
RDN7739
Flying Lead Cable, 3 ft.
RDN7740
Flying Lead Cable, 15 ft.
MOUNTING
GLN7324
Low Profile Mounting Bracket
GLN7317
High Profile Mounting Bracket
FTN6083
DIN Mount
HLN8097
Removable Slide Mount with Mini-U
Connector
HLN9227
8 in. Gooseneck Trunnion
RLN4779
Keylock Mounting Bracket
PUBLIC ADDRESS
RLN5288
ACCESSORIES
Public Address Kit (includes switch
box and cabling)
HKN9324_R Speaker Cable for PA (15 ft)
HSN1000
External Speaker, 6 W for public
address
67
English
09_Accessory.fm Page 68 Monday, August 2, 2004 10:37 AM
ACCESSORIES
Notes:
68
English
10_QR-Card.fm Page 61 Thursday, July 29, 2004 2:11 PM
Turn the Radio On or Off
1. Rotate the On/Off/Volume Control knob clockwise. You will hear the selftest pass tone and see the green LED indicator and display icons light
momentarily.
2. Rotate the On/Off/Volume Control knob counterclockwise until you hear
a click and both the display and the LED indicators turn off.
Adjust the Volume
PM400™ Quick Reference Card
Record the functions for your radio’s programmable buttons in the table
provided below. For further information, see page 16 of this User Guide.
1. Turn the On/Off/Volume Control knob clockwise to increase the volume,
or counterclockwise to decrease the volume.
Channel Selector/
Menu Scroll Buttons
Select a Conventional Radio Channel
On/Off/Volume
Knob
1.
G or H to select the desired channel.
Red/Yellow/Green
LED Indicators
Speaker
Display
Select an LTR Radio Channel
1.
G or H to select the desired LTR channel/talkgroup.
Receive
PERS4
1. Turn radio on and adjust volume to the desired level.
2. Select desired channel.
3. Listen for voice activity. The red LED indicator flashes while your radio is
receiving.
PM400
P1
P2
P3
P4
Transmit
1. Hold the microphone vertically 1 to 2 inches (2.5 to 5 cm) from your mouth.
Press the PTT button to talk. The red LED indicator lights steady while the
call is being sent.
2. Release PTT button to listen.
Start or Stop System Scan
1. Press the preprogrammed Scan button to start scan. – OR – G or H to
select a channel that contains a Scan list. From the Scan menu, select
SCAN ON. The green LED indictor blinks during scan operation.
2. Press the preprogramed Scan button again to stop scan. – OR – from the
Scan menu, select SCAN OFF.
Delete a Nuisance Channel/Talkgroup During Scanning
1. While radio is on a nuisance channel/talkgrop, hold down the preprogrammed Nuisance Delete button until you hear a tone.
2. Release Nuisance Delete button.
Microphone
Jack
Button
Menu Buttons
(P1, P2)
Function
Programmable
Buttons (P1, P2, P3, P4))
Short Press
Long Press
Hold Down
Page
10_QR-Card.fm Page 62 Thursday, August 5, 2004 5:22 PM
Restore Channels/Talkgroups to the Scan List
Power off the radio then turn it on. – OR – Press the preprogrammed Scan button
to stop the scan. The Deleted Nuisance channels/talkgroups are restored to the
scan list. – OR – G or H to select a channel/talkgroup that has not been
preprogrammed by your dealer/programmer. Once you return to the original
channel/talkgroup, the deleted nuisance channels/talkgroups are restored to the
scan list.
Send a Selective Call
1. From the Selective Call menu, select or enter desired radio ID number.
2. Press PTT button to send the call.
3. Press and hold the PTT button to speak; release to listen.
Audio Indicators for Programmable Buttons
Positive
Indicator Tone
Negative
Indicator Tone
Scan
Start
Stop
Power Level
High
Low
Squelch
Tight
Normal
Does not use
repeater
Uses repeater
Enabled
Disabled
Local
Distance
Programmable Buttons
Repeater/Talkaround
VOX
Receive a Selective Call
Local/Distance
1. When a Selective Call is received, the radio displays F and the name or ID of
the calling radio; the yellow LED flashes and two tones are heard.
2. Press PTT button to acknowledge the call.
3. Press and hold the PTT button to speak; release to listen.
Sticky Monitor/Open
Squelch
–
Enabled
Home Revert Memory
Channel (1&2)
–
Enabled
Store Memory Channel
(1&2)
–
Stored
LED Indicators
LED State/Color
Indication
Radio Call
Red
Transmitting
Flashing Red
Receiving
Flashing Red
Channel Busy
Scan
Flashing Green
Scanning for activity
Call Alert
Flashing Yellow
Indicates receiving a Call Alert
Yellow
Indicates sending a Call Alert
Selective Call
Flashing Yellow
Indicates receiving a Selective Call
Yellow
Indicates sending a Selective Call
Sticky Monitor/Open Squelch
Yellow
While monitoring
Home Revert AutoKey (1&2)
–
Enabled
Menu Mode D
–
Accessed
Radio Call
–
Enabled
Scan List Edit
–
Enabled
Speed Dial
–
Enabled
Phone Mode
–
Enabled
Option Board
Enabled
Disabled
Escalert
Enabled
Disabled
menu_nav.fm Page 105 Thursday, July 29, 2004 3:28 PM
Menu Navigation Chart
(Refer to Menu Navigation guidelines—
lower, left-hand corner of this page)
Rptr/
Talkarnd
(p. 25)
Radio Call
G
H
G
H
D
G H
System
Scan
(p. 34)
G
repeater mode/
talkarnd mode
H
on/off
Edit PL/
DPL Codes
(p. 26)
G
Program
Lists
Phone
(p. 41)
G H
H
G
Rx/Tx
Phone List
(p. 44)
add/delete/
edit/edit code
entry
Selective
Call
Call Alert
Scan List
(p. 36)
select/enter
ID
select/enter
ID
add/delete
entry
Menu Navigation
D
priority
to enter menu mode
D to select menu item
C to return to previous menu level
—or—
Hold down
C to exit menu mode
G or H to scroll through sub-list
D to select sub-menu item
G H
H
Alert
Squelch
on/off
normal/
tight
Keypad
Power Level
on/off
high/low
Tone Tag
Backlight
Intensity
standard/alert
#1 - #6
Escalert
on/off
G or H to scroll through the list
Utility
(p. 55)
Tones
(p. 49)
high/med/low
Option
Board
on/off
Software
Ver#
00_Introduction.fm Page 10 Wednesday, July 28, 2004 2:59 PM
00_Introduction.fm Page 10 Wednesday, July 28, 2004 2:59 PM
96C32-A_cvr.qxd
7/28/2004
1:43 PM
Page 1
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office.
All other product or service names are the property of their respective owners.
© Motorola, Inc. 2004. All rights reserved. Printed in U.S.A.
MOTOROLA et le logotype au M stylisé sont enregistrés auprès du Bureau des marques et brevets des États-Unis.
Tous les autres noms de produits et de services sont la propriété de leurs titulaires respectifs.
© Motorola, Inc. 2004. Tous droits réservés. Imprimé aux États-Unis.
PM400™
Commercial Series
*6881096C32*
Two-Way Radio User Guide
6881096C32-B
de la radio bidirectionnelle
Manuel de l'utilisateur