MODEL: HPB
OPERATING INSTRUCTION
AND PARTS MANUAL
■ HPB-2011 ■ HPB-3520 ■ HPB-3530 ■ HPB-4020
For technical assistance or the Shark dealer nearest you, call 1-800-771-1881
or visit our website at www.shark-pw.com
97-6131
MACHINE SPECIFICATIONS
●
Pump Volume At Pump Head:
2010
2.0 GPM
2011
2.0 GPM
2015
2.0 GPM
3010
2.5 GPM
3016
2.5 GPM
3520
3.5 GPM
3530
3.5 GPM
4020
4.2 GPM
●
Total Machine Amperage:
2010
15 Amps
2011
15 Amps
2015
20 Amps
3010
20 Amps
3016
18 Amps
3520
22 Amps
3530
29 Amps
4020
29 Amps
●
Pump Pressure At Pump Head:
2010
1000 PSI
2011
1000 PSI
2015
1400 PSI
3010
1000 PSI
3016
1600 PSI
3520
2000 PSI
3530
3000 PSI
4020
2000 PSI
●
Shipping Weight:
2010
320 Lbs.
2011
300 Lbs.
2015
320 Lbs.
3010
325 Lbs.
3016
330 Lbs.
3520
340 Lbs.
3530
515 Lbs.
4020
515 Lbs.
●
Machine Voltage:
2010
120V/1PH
2011
120V/1PH
2015
120V/1PH
3010
120V/1PH
3016
230V/1PH
3520
230V/1PH
3530
230V/1PH
4020
230V/1PH
●
Machine Dimensions:
2010
2011
2015
3010
3016
3520
3530
4020
Length = 28"
Length = 31"
Length = 28"
Length = 28"
Length = 28"
Length = 28"
Length = 41"
Length = 41"
Width =
Width =
Width =
Width =
Width =
Width =
Width =
Width =
28"
23"
28"
28"
28"
28"
32"
32"
Form 97-6131 / 97-6140 • Revised 12/03
Height =
Height =
Height =
Height =
Height =
Height =
Height =
Height =
43"
40"
43"
43"
43"
43"
44"
44"
4
CONTENTS
Introduction ............................................................ 5
Exploded View, Senior Series .............................. 20
Important Safety Information ............................. 5-6
Exploded View Parts List, Senior Series ....... 21-22
Installation ....................................................... 6, 10
Control Panel Exploded View & Parts List,
Mini Series ....................................................... 23
Component Identification, Mini Series .................. 7
Component Identification, Junior Series ............... 8
Component Identification, Senior Series .............. 9
Starting and Operating Instructions ..................... 10
Optional Equipment .............................................. 10
Control Panel Exploded View & Parts List,
Junior Series .............................................. 24-25
Control Panel Exploded View & Parts List,
Senior Series ............................................. 26-27
Float Tank Exploded View & Parts List,
Senior Series ............................................. 28-29
Preventative Maintenance .............................. 10-11
Hose & Spray Gun Assembly .............................. 30
Maintenance and Service ............................... 11-13
Steam Option, Junior & Senior Series ................. 31
Exploded View, Mini Series .................................. 14
Burner Specifications ..................................... 32-33
Exploded View Parts List, Mini Series ........... 15-16
Parts specifications ........................................ 34-35
Exploded View, Junior Series ............................... 17
Troubleshooting ............................................... 36-38
Exploded View Parts List, Junior Series ........ 18-19
Maintenance Schedule ......................................... 39
Oil Change Record ................................................ 41
Warranty
SERIAL NUMBER:
DATE PURCHASED:
FOR SALES AND SERVICE, PLEASE CONTACT:
Form 97-6131 / 97-6140 • Revised 12/03
HOT WATER PRESSURE WASHER
INTRODUCTION
OPERATOR’S MANUAL
WARNING
Thank you for purchasing a hot water pressure washer.
This manual covers the operation and maintenance
of the Mini Series, Junior Series, and Senior Series of
this pressure washer. All information in this manual is
based on the latest product information available at the
time of printing.
We reserve the right to make changes at any time without incurring any obligation.
Owner/User Responsibility:
The owner and/or user must have an understanding of
the manufacturer’s operating instructions and warnings
before using this pressure washer. Warning information
should be emphasized and understood. If the operator is
not fluent in English, the manufacturer’s instructions and
warnings shall be read to and discussed with the operator in the operator’s native language by the purchaser/
owner, making sure that the operator comprehends its
contents.
Owner and/or user must study and maintain for future
reference the manufacturers’ instructions.
This manual should be considered a permanent
part of the machine and should remain with it
if machine is resold.
When ordering parts, please specify model and
serial number.
IMPORTANT SAFETY
INFORMATION
CAUTION:To reduce the risk of injury, read operating instructions
carefully before using.
1. Read the owner's manual thoroughly. Failure to follow instructions could cause malfunction
of the machine and result in
READ OPERATOR’S
MANUALTHOROUGHLY
death, serious bodily injury and/
PRIOR TO USE.
or property damage.
2. All installations must comply with local codes. Contact your electrician, plumber, utility company or the
selling distributor for specific details.
To comply with National Electrical Code (NGPA 70)
and provide additional protection from risk of electric
shock, this hot water converter is equipped with a
UL approved ground fault circuit interrupter (GFCI)
power cord.
CAUTION
#97-6131 / 97-6140 • Rev. 12/03
RISK OF FIRE.
DO NOT USE WITH
FLAMMABLE LIQUIDS.
5
WARNING: Flammable liquids can
create fumes which can ignite
causing property damage or severe injury.
WARNING: Do not use gasoline,
crankcase drainings or oil containing gasoline, solvents or alcohol. Doing so will result in fire
and/or explosion.
WARNING: Do not spray flammable liquids. Operate
only where an open torch is permitted.
3. This fuel burning machine shall be installed only in
locations where combustible dusts and flammable
gases or vapors are not present.
4. In these oil burning models, use only kerosene, No.1
home heating fuel, or diesel fuel.
WARNING: Keep water spray, wand
WARNING and high pressure hose away from
electrical wiring or fatal electric
shock may result. Read warning
tag on electrical cord.
5. To protect the operator from
electrical shock, the machine
KEEP WATER SPRAY
AWAY FROM
must be electrically grounded.
ELECTRICAL WIRING.
It is the responsibility of the
owner to connect this machine
to a UL grounded receptacle of proper voltage and
amperage ratings. Do not spray water on or near electrical components. Do not touch machine with wet
hands or while standing in water. Always disconnect
power before servicing.
CAUTION: Spray gun kicks back — hold with both
hands.
6. Grip cleaning wand of attached pressure washer securely with both hands before starting cleaner. Failure to do this could result in injury from a whipping
wand.
WARNING: High pressure stream
WARNING of fluid that this equipment can
produce can pierce the skin and
its underlying tissues, leading to
serious injury and possible amputation.
HIGH PRESSURE
7. High pressure developed by the
SPRAY CAN PIERCE
attached pressure washer can
SKIN AND TISSUES.
cause bodily injury or damage.
Use caution when operating. Do not point the spray
gun at anyone or at any part of the body. This machine is to be used only by qualified operators.
8. Never make adjustments on machine while it is in
operation.
6
HOT WATER PRESSURE WASHER
WARNING
PROTECTIVE
EYEWEAR AND
CLOTHING MUST
BE WORN.
WARNING
RISK OF
ASPHYXIATION.
USE ONLY IN A WELL
VENTILATED AREA.
WARNING: High pressure spray
can cause paint chips or other particles to become airborne and fly
at high speeds.
9. Eye safety devices must be
worn when using this equipment.
WARNING: Risk of asphyxiation
— Use this product only in a well
ventilated area.
10. When the machine is working,
do not cover or place in a closed
space where ventilation is insufficient.
WARNING: Risk of fire. Do not add
WARNING
fuel when the machine is operating or still hot.
11. Machines with a spray gun
should not be operated with
the spray gun in the off position
RISK OF FIRE.
for extended periods of time as
DO NOT ADD FUEL
WHEN OPERATING
this may cause damage to the
MACHINE.
pump. Check to make sure
burner shuts off when spray gun trigger is closed.
12. Protect from freezing.
13. To prevent a serious injury, make certain quick coupler on discharge hose has locked before using pressure washer.
14. Do not allow acids, caustic or abrasive fluids to pass
through the pump.
15. Inlet water must be cold and clean fresh water.
16. Do not allow CHILDREN to operate the pressure
washer at any time. THIS MACHINE MUST BE
ATTENDED DURING OPERATION.
17. The best insurance against an accident is precaution, and knowledge of the machine.
18. Do not operate this product when fatigued or under
the influence of alcohol or drugs. Keep operating area
clear of all persons.
19. We will not be liable for any changes made to our
standard machines, or any components not purchased from us.
20. Do not overreach or stand on unstable support. Keep
good footing and balance at all times.
21. Follow the maintenance instructions specified in the
manual.
#97-6131 / 97-6140 • Rev. 12/03
OPERATOR’S MANUAL
22. When making repairs disconnect from electrical
source.
23. Before disconnecting high pressure hose from
hot water outlet, turn off burner to allow water to cool
to 100°F, then turn off pump motor and water supply
and operate spray gun to relieve back pressure in
hose. This will prevent coil damage from thermal expansion.
CAUTION:This machine produces hot water and must
have insulated components attached to protect the
operator.
INSTALLATION
Place machine in a convenient location providing ample
support, draining and room for maintenance.
This machine is intended for indoor use. Machine
must be stored indoors when not in use.
Location:
The location should protect the machine from damaging environmental conditions, such as wind, rain, and
freezing.
1. This machine should be run on a level surface where
it is not readily influenced by outside sources such
as strong winds, freezing temperatures, rain, etc.
It should be located to allow accessibility for refilling
of fuel, adjustments and maintenance. Normal
precautions should be taken by the operator of the
machine to prevent moisture from reaching the
electrical controls.
2. It is recommended that a partition be made between
the wash area and the machine to prevent water
spray from coming in contact with the machine. Excess moisture reaching any electric components or
electrical controls will reduce machine life and may
cause electrical shorts.
3. During installation of the machine, beware of poorly
ventilated locations or areas where exhaust fans may
cause an insufficient supply of oxygen. Sufficient
combustion can only be obtained when there is a
sufficient supply of oxygen available for the amount
of fuel being burned. If it is necessary to install a
machine in a poorly ventilated area, outside fresh
air may have to be piped to the burner and a fan
installed to bring air into the machine.
Avoid small locations or areas near exhaust fans.
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
7
COMPONENT IDENTIFICATION
MINI SERIES
Fuel Tank
Fresh Water
Faucet
(not included)
Wand Holder
Burner
Chamber
Unloader
GFCI
High Limit
Thermostat
Pump
Discharge
Nipple
Nozzle
Coupler
Insulated
Spray Gun
Variable Pressure
Insulated Wand
Control
Handle
Burner
Motor
High Pressure
Hose
#97-6131 / 97-6140 • Rev. 12/03
Garden Hose
(not included)
8
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
COMPONENT IDENTIFICATION
JUNIOR SERIES
CAUTION HOT WATER:
Must use insulated
spray gun and wand.
Fuel Tank
High Limit
Thermostat
Discharge
Nipple
Fresh Water
Faucet
(not included)
Detergent
Pick-up Hose
Pump &
Burner Switch
Downstream
Detergent Injector
Pressure
Switch
Control Panel
Unloader
Garden Hose
(not included)
Burner
Chamber
Pump
Detergent Bucket
(not included)
GFCI
Wand Holder
Burner Motor
Nozzle Coupler
Variable Pressure
Insulated Wand
Insulated
Spray Gun
Control
Handle
High Pressure
Hose
#97-6131 / 97-6140 • Rev. 12/03
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
9
COMPONENT IDENTIFICATION
CAUTION HOT WATER:
Must use insulated
spray gun and wand.
SENIOR SERIES
Fuel Tank
High Limit
Thermostat
Discharge
Nipple
Burner Switch
Pump Switch
Wand Holder
Downstream
Detergent Injector
Detergent
Pick-Up Hose
Control
Panel
Quick Coupler
Pressure
Switch
GFCI
Pump
Unloader
High
Pressure
Nozzle
Fresh Water
Faucet
(not included)
Garden Hose
(not included)
Burner
Chamber
Burner
Motor
High Pressure
Hose
Detergent
Bucket
(not included)
Nozzle
Coupler
#97-6131 / 97-6140 • Rev. 12/03
Variable Pressure
Insulated Wand
Control
Handle
Insulated
Spray Gun
10
HOT WATER PRESSURE WASHER
Electrical:
This machine, when installed, must be electrically
grounded in accordance to local codes. Check for proper
power supply using a volt meter.
Placement:
Do not locate near any combustible material. Keep all
flammable material at least 20 feet away.
Allow enough space for servicing the machine.
Local code will require certain distances from floor and
walls. (Two feet away from walls should be adequate.)
Water Source:
The water source for the pressure washer should be supplied by a minimum 5/8" I.D. garden hose with a city water pressure of not less than 30 PSI. If the water supply
is inadequate, or if the garden hose is kinked, the attached pressure washer will run very rough and the
burner will not fire.
Connection:
Connect the wand, nozzle, hose and spray gun (where
applicable). On pipe thread connections, use teflon tape
to avoid water leaks. (See Component Identification).
Venting:
Adding exhaust vent pipe to your oil fired burner is not
recommended because restricted air flow causes carbon build-up, which affects the operation, and increases
maintenance on the coil. If a stack must be used, refrain
from using 90° bends. If the pipe can not go straight up
then use only 45° bends and go to the next size pipe.
The overall pipe length must not exceed 6 feet in length.
STARTING AND OPERATING
INSTRUCTIONS
To Start:
1. STOP! Read operator’s manual
before operating. Failure to read
operation and warning instructions may result in personal injury or property damage.
2. Connect water supply hose and
turn on water.
READ OPERATOR’S
MANUALTHOROUGHLY
3. Check fuel tank and pump oil
PRIOR TO USE.
levels.
4. Connect high pressure hose to discharge nipple by
sliding quick coupler collar back. (If detergent is to
be applied, insert a detergent injector as shown in
Component Identification).
5. Insert quick coupler onto discharge nipple and secure by pushing quick coupler collar forward.
CAUTION
#97-6131 / 97-6140 • Rev. 12/03
OPERATOR’S MANUAL
6. Securely attach the desired high pressure nozzle into
wand coupler as described in steps 4 and 5.
7. Connect the power cord into the proper electrical outlet, then push in the GFCI reset button. (Refer to
serial plate for information.)
8. Grip spray gun handle securely and pull trigger. Then
turn variable pressure control handle counterclockwise.
9. Turn switch to pump position. When a steady stream
of water flows from the spray gun and wand the machine is ready for cold water cleaning by turning the
variable pressure control handle clockwise to raise
the pressure.
10. For hot water washing, turn the switch to the burner
position. (The burner will light automatically when
the trigger on the spray gun is pulled.)
To Stop:
1. If using the detergent injector, place the detergent
hose in a bucket of water allowing detergent to be
flushed from system.
2. Turn burner switch off and continue spraying water,
allowing the water to cool.
3. After water has cooled to less than 100°F, turn the
attached pressure washer off.
4. Turn garden hose water off. Open the spray gun to
relieve remaining pressure.
5. Protect from freezing.
OPTIONAL EQUIPMENT
Auto Start/Stop Timer Operation
Once the pump switch is turned on, simply triggering the
spray gun is all it takes to start the machine. Once the
trigger is released the timer will let the machine bypass
water for 15 seconds. It also starts an internal 5 to 60
minute lockout timer. This feature is totally adjustable by
the operator by adjusting the knob at the top of the timer.
We recommend setting the timer for 15 minutes. To reset the lockout feature, operator must trigger the spray
gun for 10 full seconds.
PREVENTATIVE MAINTENANCE
1. Use clean fuel — kerosene, No. 1 home heating fuel
or diesel fuel. Clean or replace fuel filter every 100
hours of operation. Avoid water contaminated fuel as
it will seize up the fuel pump. De-soot coils monthly.
Use an additive if diesel is being used.
2. Check to see that the attached pressure washer water pump is properly lubricated.
3. Follow winterizing instructions to prevent freeze damage to pump and coils.
4. Always neutralize and flush detergent from system
after use.
HOT WATER PRESSURE WASHER
5. If water is known to be high in mineral content, use a
water softener on your water system, or de-scale as
needed.
6. Do not allow acidic, caustic or abrasive fluids to be
pumped through the system.
7. Always use high grade quality cleaning products.
8. Never run attached pressure washer pump dry for
extended periods of time.
9. If machine is operated with smoky or eye burning
exhaust, coils will soot up, preventing water from
reaching maximum operating temperature. (See section on Maintenance and Service).
10. Never allow water to be sprayed on or near the motor
or burner assembly or any electrical component.
11. Delime coils as per instructions.
It is advisable, periodically, to visually inspect the burner.
Check air inlet to make sure it is not clogged or blocked.
Wipe off any oil spills and keep equipment clean and
dry.
The areas around the pressure washer should be kept
clean and free of combustible materials, gasoline and
other flammable vapors and liquids.
The flow of ventilating air to the burner must not be blocked
or obstructed in any manner.
MAINTENANCE AND SERVICE
Unloader Valves:
Unloader valves trap pressure in the line when a shut-off
spray gun is closed. Machines with unloader valves are
preset and tested at the factory before shipping. Occasional adjustment of the unloader may be necessary to
maintain correct pressure.
Winterizing Procedure:
Damage due to freezing is not covered by warranty. Adhere to the following cold weather procedures whenever
the washer must be stored or operated outdoors under
freezing conditions.
During winter months, when temperatures drop below
32°F, protecting your machine against freezing is necessary. Store the machine in a heated room. If this is not
possible then mix a 50/50 solution of anti-freeze/water
or windshield washer fluid with water in a 5 gallon bucket.
Place a short section of garden hose into the bucket and
connect it to the machine. Elevate the bucket and turn
the pump on to siphon the anti-freeze through the machine. If compressed air is available, an air fitting can be
screwed into the inlet connector and by injecting compressed air, all water will be blown out of the system.
If you have an optional float tank, pour the antifreeze
into this tank and run machine until antifreeze exits discharge nipple.
#97-6131 / 97-6140 • Rev. 12/03
OPERATOR’S MANUAL
11
High Limit Hot Water Thermostat:
For safety, each machine is equipped with a high limit
control switch. In the event the temperature of the water
should exceed its operating temperature, the high limit
control will turn the burner off until the water cools.
Pumps:
Use only SAE 30 weight non-detergent oil. Change oil
after first 50 hours of use. Thereafter, change oil every
three months or at 500 hour intervals. Oil level should be
checked by using the dipstick found on the top of the
pump or by the red dot visible through the oil gauge window. Oil should be maintained at that level.
Cleaning of Coils:
In alkaline water areas, lime deposits can accumulate
rapidly inside the coil pipes. This growth is increased by
the extreme heat build up in the coil. The best prevention
for liming conditions is to use high quality cleaning detergents. In areas where alkaline water is an extreme
problem, periodic use of deliming powder will remove lime
and other deposits before coil becomes plugged.
Deliming Coils With A Pressure Washer:
Periodic flushing of coils is recommended.
Step 1 Fill a 5 gallon bucket with 4 gallons of water,
then add 1 lb. of deliming powder. Mix thoroughly.
Step 2 Remove the high pressure nozzle from the pressure wand and put the wand into the bucket. Secure the trigger on the spray gun into the open
position.
Step 3 Attach a short section (3-5 ft.) of garden hose to
the attached pressure washer to siphon solution from the elevated bucket. Start up pressure
washer, allowing solution to be pumped through
pressure washer and into HPB coils and back
into the bucket. Solution should be allowed to
circulate 2-4 hours.
Step 4 After circulating solution flush entire system with
fresh water.
Removal of Soot In Heating Coil:
In the heating process, fuel residue in the form of soot
deposits may develop between the heating coil pipe and
block air flow which will affect burner combustion. When
soot has been detected on visual observation, the soot
on the coil must be washed off after coil has been removed using the following steps:
1. Remove the tank head assembly by unscrewing the
three tek screws and lifting the tank head off.
2. Remove the two pipe nipples and associated fittings.
3. Lift the coil out of the outer wrap.
12
HOT WATER PRESSURE WASHER
CAUTION: The coil weighs about 80 lbs. Use proper
lifting techniques.
4. Clean, repair and replace the coil by reversing the
above steps.
OPERATOR’S MANUAL
Electrode Setting - Beckett:
(See illustration below)
5/32" Gap
Electrode
Coil Reinstallation
Reinstall by reversing the above steps 4 through 1.
Rupture Disk
5/16"
If pressure from pump or thermal expansion should exceed safe limits, the rupture disk will burst, allowing high
pressure to be discharged through hose to ground. When
the disk ruptures, it will need to be replaced.
Nozzles
1/16"
Top View
Fuel:
Use clean fuel oil that is not contaminated with water and
debris. Replace fuel filter and drain tank every 100 hours
of operation. Use Kerosene No. 1 or No. 2 Heating Fuel
(ASTM D306) or diesel only. NEVER use gasoline in your
burner tank. Gasoline is more combustible than fuel oil
and could result in a serious explosion. NEVER use crankcase or waste oil in your burner. Fuel unit malfunction
could result from contamination.
Side View
Electrodes Check: Periodically check wiring connections.
If necessary to adjust electrodes, use diagram.
Burner Nozzle:
Keep the tip free of surface deposits by wiping it with a
clean, solvent-saturated cloth, being careful not to plug
or enlarge the nozzle. For maximum efficiency, replace
the nozzle each season.
Fuel Control System:
Ignition Circuit:
Periodically inspect wires, spring contact and electrodes
for condition, security and proper spacing. For transformer
test (CAUTION 10,000 VOLTS) use defect free insulated
screwdriver and keep fingers off blade! Lay blade across
one contact: OK if arc will span 1/2" between end of blade
and other contact.
This machine utilizes a fuel solenoid valve located on the
fuel pump to control the flow of fuel to the combustion chamber. This solenoid is activated by a pressure switch located
on the unloader valve. When an operator releases the trigger on the spray gun, the pressure drops, allowing the pressure switch to activate the fuel solenoid. The solenoid then
closes, shutting off the supply of fuel to the combustion
chamber. Controlling the flow of fuel in this way gives an
instantaneous burn or no burn situation, thereby eliminating high and low water temperatures, and combustion
smoke normally associated with machines incorporating
a spray gun. Periodic inspection is recommended to insure that the fuel solenoid valve functions properly. This
can be done by operating the machine and checking to
see that when the trigger on the spray gun is in the off
position, the burner is not firing.
Electrode Setting - Wayne:
Fuel Pressure Adjustment:
(See illustration below)
To adjust fuel pressure, turn the adjusting screw with a
standard screwdriver (located on the fuel pump) clockwise to increase, counterclockwise to decrease. Do not
exceed 200 PSI.
Gap
1/8"
Electrodes
1/8"
3/8"
3/16"
Top View
1/2"
2-7/8"
Nozzle
Adapter
Side View
Electrodes Check: Periodically check wiring connections.
If necessary to adjust electrodes, use diagram.
#97-6131 / 97-6140 • Rev. 12/03
HOT WATER PRESSURE WASHER
Air Adjustment
OPERATOR’S MANUAL
13
FUEL AIR ADJUSTMENT: BECKETT
Machines are preset and performance tested at the factory — elevation 100' above sea level. A one time correction for your location will pay off in economy, performance and extended service life. If a smoky or eye-burning exhaust is being emitted from the stack, two things
should be checked.
Air Band
First, check the fuel to be certain that kerosene or No. 1
home heating fuel is being used.
Transformer
Next, check the air adjustment on the burner. An oily, black,
smoky fire indicates a lack of air and the air band should
be moved to allow the air to flow through the burner. Sharp,
eye-burning white fumes indicate too much air flowing
through the combustion chamber. The air band should be
moved to allow less air to flow through the burner.
To adjust: start machine and turn burner ON. Loosen the
two locking screws found in the air shutter openings (refer
to illustrations) and close air shutter until black smoke appears from burner exhaust vent. Note air band position.
Next, slowly open the air shutter until white smoke just
starts to appear. Turn air shutter halfway back to the black
smoke position previously noted. Tighten locking screws.
If the desired position cannot be obtained using only the
air shutter, lock the air shutter in as close a position as can
be obtained, then repeat the above procedure on the air
band setting.
FUEL AIR ADJUSTMENT: WAYNE
Air Band
Pressure
Gauge Port
Air Band
Adjustment
Screw
Pressure
Adjustment
Screw
Fuel Pump
#97-6131 / 97-6140 • Rev. 12/03
Fuel Pump
Air Band
Adjustment
Screw
Pressure
Gauge Port
Pressure
Adjustment Screw
HOT WATER PRESSURE WASHER
14
OPERATOR’S MANUAL
MINI SERIES
EXPLODED VIEW
1
25
73
26
32
2
27
15
3
24
6
76
56
80
28
4
14
13
79
8, 23
5
16
17
67
22
20
30
32
11
46
81
7
6
12
18
10
31
19
52
19
To
Burner
18
34
36
33
9
37
38
39
68
50
For
Detail See
Mini Series
Control
Box
40
47
41
48
42
51
78
35
43
65
72
45
49
60
44
For Detail
See Steam
Valve
Options
Illus.
75
61
77
63,55,
52
62
65
70
48
77
65
60
64
57
59
74
29
53
54
66
Optional
Filter
Upgrade
21
69
86
67
84
71
72
85
58
#97-6131 / 97-6140 • Rev. 12/03
83
Optional
Upstream
Injector
83
82
HOT WATER PRESSURE WASHER
15
OPERATOR’S MANUAL
MINI SERIES
EXPLODED VIEW PARTS LIST
ITEM
PART NO.
DESCRIPTION
1
10-02025A
Label, Hot/Caliente w/Arrows
Warning
QTY
PART NO.
DESCRIPTION
34
4-02047732
Hose, 3/8" x 32", 2 Wire,
Pressure Loop
1
2
95-07290029
Tank Head Assy
1
3
7-014862
Insulation, Top Head
1
4
90-50045
Clip, Retaining U-Type
4
5
2-0115090
Tank, Fuel 6 Gal Blank
1
6
4-02100000
Hose, 1/4", Push-On, Fuel Line
(16")
2
7
11-013
Label, Logo, Large
1
11-014
Label, Logo, Large
1
90-19710
Screw, 1/4" x 3/4" HH NC,
Whiz Loc
4
8
ITEM
35
36
6-01041
10-99078
Cord, Service, SEO, 12/3,
Coleman
QTY
1
3.66 ft
Label, Motor Overload Reset,
Lexan
37
See Pages 34 & 35 for Motor Details
38
2-30082
1
Pump Protector, 1/2" PTP
(201107)
1
2-300816
Pump Protector, 3/8" PTP
(201101)
1
39
6-021720
Switch, Pressure N/O, 1/4" NPT
SS
1
9
7-014861
Insulation, Bottom
1
40
See Pages 34 & 35 for Pump/Unloader Details
10
95-07102249
Coil Wrap
1
41
2-00601
Elbow, 1/2" JIC x 3/8" Fem
1
11
4-02130050
Hose, 7/8" Push-On,
Conduit
42
2-10942
Swivel, 1/2" MP x 3/4" GHF,
w/Strainer (201107)
1
Swivel, 3/8" MP x 3/4" GHF
w/Strainer (201101)
1
Plug, 1/4" Countersunk
(201107)
1
Plug, 1/8" Countersunk
(201101)
1
2 ft
12
2-0008
Nipple, 1/2" Hex Steel
1
13
7-01487
Insulation, Blanket
1
14
2-0031
Elbow, 3/8" Street, 90°
1
15
10-09004
Label, Hot Water Outlet
1
16
2-3408
Disk, Rupture Assy, 8000 PSI
1
17
2-90041
Clamp, Screw, #16 Micro
1
18
2-1085
Hose Barb, 1/4" Barb x 1/4" ML
Pipe
2
19
2-9040
Clamp, Hose, UNI .46-.54
4
20
2-2007
Nipple, 3/8" x 3/8" NPT ST Male1
21
2-1058
22
2-99031
Filter, Diesel Fuel, Disposable 1
23
90-2022
Nut, Cage, 1/4" x 16 GA
4
24
95-07102247
Fuel Strap, Long
2
25
90-1996
Screw, 3/8" x 3/4" HH NC,
Whiz
2
Nipple, 1/2" Pipe x 3/8" Pipe
1
26
10-020110
Label, Use Only Kerosene
1
27
2-011576
Cap, Non-Vented, Plastic
1
28
11-1043
Label, Warning, Pictorial
1
29
2-01041
Pad, Soft Rubber, 50 DURO
2
30
95-07102248
Fuel Strap, Short
2
31
2-30057
Valve, 1/4" Shut-Off
1
32
2-010061
Bushing, Rubber, Nitrile
2
33
2-0053
Elbow, 1/2" JIC, 3/8", 90°
1
#97-6131 / 97-6140 • Rev. 12/03
2-10943
43
2-1046
2-1044
44
See Pages 34 & 35 for Pump/Unloader Details
45
90-1016
Bolt, 3/8" x 1", NC HH
46
2-10866
Hose Barb, 1/4" x 3/8" Double 1
47
90-1006
Bolt, 5/16" x 3/4" NC GR 5 CS
ZN
4
48
90-4001
Washer, 5/16", Flat, SAE
8
49
10-09003
Label, Cold Water Inlet, HS
1
50
2-0155
Fastener, Ratchet, Black Nylon 2
51
2-01103
Grip, 1" Sqr, Handle
2
52
90-19711
Screw, 1/4" x 1/2" HH NC,
Whiz Loc
12
4
53
95-07102218
Assy, Frame
1
54
90-40125
Washer, 3/8" x 1"
2
55
90-20231
Nut, Cage, 1/4" x 12 GA
8
56
4-02100000
Hose, 1/4" Push-On (21")
1
6-0516
▲ Strain Relief, 1/2" Metal,
Two Screw (Burner Assembly) 1
6-01011
▲ Cord, Service, SEO, 16/4,
Coleman
4.25 ft
16
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
MINI SERIES
EXPLODED VIEW PARTS LIST (CONTINUED)
ITEM
PART NO.
DESCRIPTION
57
95-07102311
Axle, 5/8" x 22"
QTY
PART NO.
DESCRIPTION
1
58
Burner Assembly, See Burner Spec's Page 32
59
90-4015
71
4-0303
Wheel & Tire Assy, 4" Steel Rim
w/Tube
2
Washer, 7/16" x 2-1/2", Zinc,
PG Foot
72
90-20041
Collar, 5/8" Bore Shaft 3010
2
2
73
2-010066
Elbow, Fuel Tank, Zinc
1
74
90-2001
Nut, 5/16" ESNA, NC
4
75
95-07102217
Assy, Power Platform, Mini
1
76
95-07101225
Block, Discharge,
Brass 3/8" x 1/2"
1
6
60
90-4005
Washer, 5/8", Flat, SAE
2
61
6-01060
GFCI, 120V 20A,
w/36' 12-3 Cord
1
ITEM
QTY
62
10-08018
Label, Warning, Service Cord
1
63
95-07290007
Outer Wrap Tabs
4
77
90-2002
Nut, 3/8", ESNA, NC
64
3-1007
Injector, Adjustable Inlet
1
78
6-0515
65
90-4002
Washer, 3/8", SAE, Flat
10
Connector, Flex, 90°, 3/8"
(Motor)
1
95-07102310
Assy, Coil
1
1
66
90-10201
Bolt, 3/8" x 2-1/4", HH, GRD.5
2
79
67
90-20040
Nut, 3/8", Flange Whiz Loc, NC 4
80
95-07104506
Insulation Retainer Ring, 16"
68
15-070042532 Cap, Valve, with 1/4" Gauge Port
(201107)
1
81
4-02100000
Hose, 1/4" Push On (28")
1
82
2-1905
Strainer, 1/4" Brass
1
1-190031
Cap, Valve, with 1/4" Gauge Port
(201101)
1
83
2-9040
Clamp, Hose, UNI .46 - .54
2
84
35-156
69
4-02080000
Tube, 1/4" x 1/2", Clear Vinyl
6 ft
Fuel Filter Uprgrade Option
(Items 84-86)
70
2-10943
Swivel, 3/8" MP x 3/4" GHF
w/Strainer
2-99050
Filter, Fuel Oil, H20
1
1
85
2-0012451
Nipple, 1/4" x 3" Black Pipe
1
86
2-1089
Hose Barb, 1/4" Barb x 1/4" Pipe,
90°
1
▲ Not Shown
#97-6131 / 97-6140 • Rev. 12/03
HOT WATER PRESSURE WASHER
17
OPERATOR’S MANUAL
1
JUNIOR SERIES
6
24
EXPLODED VIEW
63
14
81
2
33
7
45
23
17
8
13
42
37
19
9
33
56
55
12
58
79, 80
10
65
67
39
20
22
For Detail
See Steam
Valve
Options
Illus.
5
For Detail
See Junior
Series
Control
Panel Illus.
44
60
50
52
48
64
53
26
4
62
32
30
11
46
72
66
29
70
68
3
28
43
18
36
71
34
61
38
55
27
39
40
78
57
21
31
35
59
47
54
41
Optional Filter
Upgrade
69
68
Optional
Upstream
Injector
66
To Fuel
Tank
25
82
68
83
51
15
76
75
68
84
49
73
68
74
49
77
16
#97-6131 / 97-6140 • Rev. 12/03
48
18
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
JUNIOR SERIES
EXPLODED VIEW PARTS LIST
ITEM
PART NO.
DESCRIPTION
1
10-020110
Label, Use Only Kerosene
2
10-02025A
Label, "Hot/Caliente"
with Arrows Warning
QTY
1
ITEM
PART NO.
DESCRIPTION
27
90-1006
Bolt, 5/16" x 3/4"
28
6-01059
GFCI, 240V 1PH 30A w/36' 10-3
Cord (352007, 352001)
1
6-01060
GFCI, 120V, 20A w/36' 12-3 Cord
(201007, 201001, 201507,
201501, 301007, 301001)
1
6-010631
GFCI, 240V 1 PH 20A, w/36'
12-3 Cord (301607, 301001)
1
2-3408
Disk, Rupture Assy, 8000 PSI
1
2-3480
Rupture Disk Replacement,
8000 PSI
1
1
QTY
4
3
10-08018
Label, Warning, Service Cord
1
4
10-09004
Label, Hot Water Outlet
1
5
11-013
Label, Logo Large
1
11-014
Label, Logo, Large
6
11-0101
Label, Warning (Lexan)
7
See Pages 34 & 35 for Motor Details
8
See Pages 34 & 35 for Pump/Unloader Details
9
See Pages 34 & 35 for Pump/Unloader Details
30
10-09003
Label, Cold Water Inlet HS
1
2-1046
Plug, 1/4" (Legacy)
1
31
2-1905
Strainer, 1/4" Brass (Option)
1
2-1044
Plug, 1/8" (General)
1
32
2-00602
Elbow, 1/2" JIC x 1/2" FM
1
11
2-0031
Elbow, 3/8" Street
1
33
6-021720
Pressure Switch, 1/4"
1
12
2-10943
Swivel, 3/8" x 3/8" GHF
w/Strainer (General)
34
95-07102242
Frame, Junior
1
35
4-02130050
Hose, 7/8"
Swivel, 1/2" MP x 3/4" GHF
w/Strainer (Legacy)
1
36
2-90041
Clamp, Screw #16
1
37
90-50045
Clip, Retainer
5
38
90-2002
Nut, 3/8" ESNA
2
39
90-4002
Washer, 3/8" Flat
6
40
90-4015
Washer, 3/8" x 2-1/2"
2
41
90-10201
Bolt, 3/8" x 2-1/4"
2
42
2-300816
Pump Protector, 3/8" General
Pump Assembly
1
10
2-10942
1
13
7-014832
Tank Head Insul.
1
14
90-40001
Washer, 1/4"
4
15
6-0128
Conduit, 25"
1
16
6-051591
Connector 1/2" L/T 90° Black
1
17
1-190031
Cap, Valve w/1/4" Port
(General)
1
15-070042532 Cap. Valve w/1/4" Port
(Legacy)
1
18
4-011183
4-011184
29
1
2.33 ft.
2-30082
Pump Protector, 1/2" Legacy
Pump Assembly
1
43
2-2007
Coupler Plug, 3/8" Male
1
1
44
2-00601
Elbow, 1/2" JIC x 3/8" Fem
1
Downstream Injector Assy,
Non-Adj #3 (2011, 3010, 3520,
3530, 4020)
1
45
95-07290029
Tank Head Assembly 16" x 8" 1
46
95-07101225
Block Discharge 3/8" x 1/2"
1
47
95-07102205
Axle, 5/8" x 27"
1
48
90-20041
Collar, 5/8"
2
49
90-20040
Nut, 3/8" Flange, Whiz Loc
4
50
4-02047729
Hose, 3/8" x 29", Press Loop
1
51
Burner Assembly, See Burner Spec's Page 32
Downstream Injector Assy,
Non-Adjust #2 (2010, 2015,
3016)
19
95-07121218
Coil, Heating, Jr
1
20
90-1016
Bolt, 3/8" x 1"
4
21
2-01041
Pad, Soft Rubber, 50 Duro
2
22
2-01103
Grip, 1" SQR, Handle
2
23
2-011506
Tank Fuel, 9 Gallon Poly,
Black
1
52
95-07290053
Retainer, Burner Insulation
1
7-01482
Insulation, Tank Bottom,
1" Blanket
1
24
2-01167
Cap, Fuel Tank Plastic H60-AV 1
53
25
4-0303
Wheel & Tire, 4" Steel Rim
w/Tube
2
54
90-40125
Washer, 3/8" x 1"
2
Adjustable Thermostat
1
55
90-4001
Washer, 5/16", Flat
8
26
4-05088
#97-6131 / 97-6140 • Rev. 12/03
HOT WATER PRESSURE WASHER
JUNIOR SERIES
EXPLODED VIEW PARTS LIST
ITEM
PART NO.
DESCRIPTION
56
90-2001
Nut, 5/16", ESNA
QTY
4
57
90-2020
Nut, Cage, 3/8" x 12 GA
4
58
95-07200129
Wrap, Outer Coil, Red
1
59
95-0729007
Tab, Outer Wrap
4
60
2-00091
Nipple, 1/2" x 3", Galv.
1
61
90-19711
Screw, 1/4" x 1/2", Whiz Loc
12
62
90-19960
Screw, 3/8" x 1-1/4" Whiz Loc
4
63
90-19980
Screw, 1/4" x 1"
4
64
90-200012
Nut, 1/4" Flange
4
65
2-0155
Fastener, Ratchet, Black Nylon 2
66
90-4005
Washer, 5/8" Flat
2
67
2-00101
Nipple, 1/2" x 4", Galv.
1
68
2-9040
Clamp,Hose UNI .46-.54
6
69
4-02080000
Tube, 1/4" x 1/2", Clear Vinyl,
(Option)
6 ft
70
3-1007
Injector, Adjustable Inlet (Option)1
71
2-1058
Nipple, 1/2" Pipe x 3/8" Pipe
(Option)
1
72
2-10943
Swivel, 3/8" MP x 3/4" GHF
1
73
2-1085
Hose Barbs
2
74
2-99031
Fuel Filter
1
75
4-02100000
Fuel Line, 1/4"
28 in.
76
4-02100000
Fuel Line, 1/4"
6 in.
77
4-02100000
Fuel Line, 1/4"
21 in.
78
90-20231
Nut, Cage, 1/4" x 12 Gauge
8
79
90-2002
Nut, Cage, 1/4" x 16 Gauge
5
80
90-19710
Screw 1/4" x 3/4" HH NC
Whiz Loc
5
1
81
10-99078
Label, Motor Overload Reset
82
35-156
Fuel Filter Uprgrade Option
(Items 82-84)
2-99050
Filter, Fuel/Oil/H2O
1
1
83
2-0013451
Nipple, 1/4" x 3"
84
2-1089
Hose Barb, 1/4" Barb x 1/4" Pipe
90°
1
▲ Not Shown
#97-6131 / 97-6140 • Rev. 12/03
OPERATOR’S MANUAL
19
20
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
SENIOR SERIES
EXPLODED VIEW
2
1
61
Reversed View of Label
50
75
18
83
32
60
10
71
49
30
33
6
3
86
87
72
49
9
28
27, 41
53
31
75
88, 69
5
For
Detail See
Senior Series
Control Panel
Illus.
65
64
89
71
14
85
75, 26
57
54
8
56
71
63
25
62
58
15
19
20
45
55
29
51
26
17
11
24
37
48
23
16
66
67
75
71
39
36
For
Detail See
Steam Valve
Options
Illus.
68
12
47
4
84 34
42
35
13
43
38
73
7
22
52
70
Optional
Filter
92
Upgrade
40
93
For
Detail See
Optional
Float Tank
Illus.
48
77
To Fuel
Tank
44
94
76
80
77
78
46
51
79
59
81
82
#97-6131 / 97-6140 • Rev. 12/03
74
16
HOT WATER PRESSURE WASHER
21
OPERATOR’S MANUAL
SENIOR SERIES
EXPLODED VIEW PARTS LIST
ITEM
PART NO.
DESCRIPTION
1
10-020110
Label, Use Only Kerosene
QTY
1
2
10-02025A
Label, "Hot/Caliente" with
Arrows Warning
1
ITEM
PART NO.
DESCRIPTION
29
6-021720
Pressure Switch, 1/4"
QTY
1
30
90-40001
Washer, 1/4"
4
31
95-07164053
Outer Wrap, 18" Coil
1
3
10-08018
Label, Warning, Service Cord
1
32
95-07163088
Tank End 18"
1
4
10-09004
Label, Hot Water Outlet
1
33
7-014866
Insulation Disk
1
5
11-013
Label, Logo, Large
1
34
2-0031
Elbow, 3/8" Street
1
11-014
Label, Logo Large
1
35
2-2007
Nipple, 3/8"
1
6
11-0101
Label, Warning (Lexan)
1
36
95-07101225
Discharge Block, 3/8" x 1/2"
1
7
2-01041
Pad, Soft Rubber, 50 Duro
2
37
2-00602
Elbow, 1/2" JIC x 1/2" FEM
1
8
2-01103
Grip, 1" SQR, Handle
2
38
4-02047722
Hose, 3/8" x 22"
1
9
2-011506
Tank, Fuel, 9 Gallon Poly,
Black
39
2-00601
Elbow, 1/2" JIC, 3/8" Fem
(Legacy)
1
1
10
2-01167
Cap, Fuel Tank, Plastic H60-AV 1
11
2-30082
Pump Protector, 1/2" PTP
1
12
95-07102241
Frame
1
13
4-011184
Downstream Injector Assy.,
Non Adj. #3
1
Power Platform
(402001, 402007)
1
Power Platform, Large
(353001, 353007)
1
14
95-07102243
95-07102245
2-0053
Elbow, 1/2" JIC x 3/8", 90°
(General)
1
40
90-10201
Bolt, 3/8" x 2-1/4"
1
41
90-2007
Nut, 3/8" Hex
2
42
2-3408
Rupture Disk Assy, 8000 PSI
1
2-3480
Replacement, Rupture Disk
8000 PSI
1
1
43
2-90041
Screw Clamp #16
44
4-02130050
Hose, 7/8"
45
1-190029
Cap, Valve w/1/4" Port
(General)
1
15-070042532 Cap, Valve w/1/4" Port
(Legacy)
1
2.33 ft.
15
2-0155
Fastener, Ratchet Black Nylon
2
16
4-0307
Wheel & Tire, 6" Steel Rim
2
17
4-05088
Thermostat, General 302 DGR 1
18
See Pages 34 & 35 for Motor Details
19
See Pages 34 & 35 for Pump/Unloader Details
46
90-20040
Nut, 3/8" Flange, Whiz Loc
4
20
See Pages 34 & 35 for Pump/Motor Details
47
2-10942
Swivel, 1/2", GHF
1
21
2-10943
Swivel, 3/8" MP x 3/4" GHF
w/Strainer
48
90-4005
Washer, 5/8" Flat
2
1
49
90-19980
Screw, 1/4" x 1"
7
50
2-011724
Belt Guard
1
95-07102101
▲ Tab, Belt Guard Mount
3
51
90-20041
Collar, 5/8"
2
52
95-07102215
Axle, SR
1
53
95-07102244
Pump Rail (General)
1
95-07163136
Pump Rail (Legacy)
1
22
90-2020
Nut, Cage, 3/8" x 12 GA
4
23
7-014865
Insulation Blanket,
18" OD x 4.5" ID
1
2-1046
Plug, 1/4" (Legacy)
1
2-1044
Plug, 1/8" (General)
1
25
90-200012
Nut, 1/4", Flange
4
26
90-1016
Bolt, 3/8" x 1"
8
27
90-10220
Bolt, 3/8" x 3-1/2", TAP
2
28
95-07164054
Coil 18"
1
7-01433
▲ Insulation Blanket
1
24
#97-6131 / 97-6140 • Rev. 12/03
54
See Pages 34 & 35 for Pulley Details
55
See Pages 34 & 35 for Pulley Details
56
See Pages 34 & 35 for Belt Details
57
See Pages 34 & 35 for Bushing Details
58
See Pages 34 & 35 for Bushing Details
22
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
SENIOR SERIES
EXPLODED VIEW PARTS LIST (CONTINUED)
ITEM
PART NO.
DESCRIPTION
QTY
59
Burner Assembly, See Burner Spec's Page 32
60
90-50045
Clip, Retainer
4
61
ITEM
86
PART NO.
DESCRIPTION
90-4001
Washer, 5/16" Flat SAE (Legacy)4
QTY
90-4002
Washer, 3/8" Flat SAE (General) 4
11-3229
Label, Belt Guard
1
87
90-4008
Washer, 5/16" Lock Split
4
11-3119
Label, Belt Guard
1
88
90-2022
Nut, Cage 1/4" x 16 Ga.
4
62
95-07290053
Retainer, Burner Insulation
1
89
90-19710
63
90-19960
Screw, 3/8" x 1-1/4" Whiz Loc
4
Screw, 1/4" x 3/4" HH, NC
Whiz Loc
4
64
2-00091
Nipple, 1/2" x 3", Galv.
1
90
2-1905
Strainer, 1/4" Brass
1
2-9040
Clamp, Hose, UNI .46 - .54
2
35-156
Fuel Filter Upgrade Option
(Items 92-94)
65
2-00101
Nipple, 1/2" x 4", Galv.
1
91
66
95-0729007
Tab, Outer Wrap
4
92
67
90-20231
Nut, Cage, 1/4" x 12 GA
14
68
90-19711
Screw, 1/4" x 1/2", Whiz Loc
15
69
90-19708
Screw, 1/4" x 1-1/4", Whiz Loc 4
70
90-40125
Washer, 3/8" x 1"
2
71
90-4002
Washer, 3/8", Flat
25
72
6-01059
GFCI, 230V, 30 Amp
(402001A, 402007A)
1
6-010690
GFCI, 240V, 40 Amp
(353001, 353007)
1
6-0109
Service Cord, 10/4
(353001B, 353007B)
15 ft.
6-0105
Service Cord, 12/4 (353001C,
353007C, 402001B/C,
402007B/C)
15 ft.
73
90-4015
Washer, 7/16" x 2-1/2"
74
2-1085
Hose Barb, 1/4"
2
75
90-2002
Nut, 3/8", ESNA
13
76
4-02100000
Fuel Line, 1/4"
77
2-9040
Clamp, Hose UNI .46-.54
78
2-99031
Filter, Fuel
79
4-02100000
Fuel Line, 1/4"
21 in.
80
4-02100000
Fuel Line, 1/4"
6 in.
81
6-0128
Conduit, Water Tite
82
6-051591
Connector 1/2" L/T 90° Black
1
83
10-99078
Label, Motor Overload Reset
(4020A Only)
1
2
28 in.
4
1
2.25 ft.
84
10-09003
Label, Cold Water Inlet
1
85
90-1030
Bolt, 8mm x 16mm Hex Head
(Legacy)
4
#97-6131 / 97-6140 • Rev. 12/03
2-99050
Filter, Fuel/Oil/H2O
1
93
2-0013451
Nipple, 1/4" x 3"
1
94
2-1089
Hose Barb, 1/4" Barb, 1/4" Pipe,
90°
1
▲ Not Shown
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
23
CONTROL PANEL
MINI SERIES
4,11
3
2
(Reversed
View of Label)
1
18
13
3
5
15
17
6
16
14
7
12
4
10
9
8
ITEM
PART NO.
DESCRIPTION
QTY
1
10-08021
Label, Disconnect Pwr Supply 1
2
90-1991
Screw, 10/32" x 1/2" NHSOC,
Blk
4
3
6-020201
Switch, 3 PS, 115V-230V, 1PH 1
4
4-05088
Thermostat, Adjustable, 302°F 1
5
6
7
8
90-1994
6-05152
6-051595
Screw, 10/32" x 1-1/4" RH, SL,
Blk
1
Strain Relief, STRT, LQ TITE
3231, Small
Strain Relief, STRT, LQ TITE
3234, Large
3
1
4-12804000
Nozzle, SAQCMEG 0004, Red 1
4-12804015
Nozzle, SAQCMEG 1504,
Yellow
4-12804025
Nozzle, SAQCMEG 2504,
Green
#97-6131 / 97-6140 • Rev. 12/03
1
1
ITEM
PART NO.
DESCRIPTION
8
4-12804040
Nozzle, SAQCMEG 4004,
White
1
Grommet, Rubber,
Nozzle Holder
4
11-0318
Label, Control Panel, Mini
1
11-0320
Label, Control Panel, Mini
1
11
6-01270
▲ Conduit, 1/4" Split
12
6-05181B
Locknut, 3/4" 8465
13
9-2018
Nut, Cage, 10/32" x 16 GA
4
14
6-05181A
Locknut, 1/2" 8463
3
15
90-017
Nut, 10/32" Keps
5
16
95-07102246
Electric Box Cover, Mini
1
17
2-01403
Bushing, Snap, 5/8"
1
18
11-1042
Label, Ground
1
9
10
2-0103
▲ Not Shown
QTY
36 in
1
24
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
CONTROL PANEL
JUNIOR SERIES
3
15, 16
7
8
3
19
14
13
17
20
6
15
11
12
18
21
5
1
22
2
9
9
10
21
#97-6131 / 97-6140 • Rev. 12/03
4
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
25
CONTROL PANEL
JUNIOR SERIES
ITEM
PART NO.
DESCRIPTION
ITEM
PART NO.
DESCRIPTION
4
4-12804515
Nozzle, SAQCMEG 15045, Yellow
(301601)
1
Switch, 3 PS, 115V-230V, 1 PH
Salzer
1
4-12804525
Nozzle, SAQCMEG 25045, Green
(301601)
1
4-12805000
Nozzle, SAQCMEG 0005, Red
(301001, 352007, 352001)
1
4-12804540
Nozzle, SAQCMEG 40045, White
(301601)
1
4-12805015
Nozzle, SAQCMEG 1505, Yellow
(301001, 352007, 352001)
1
5
2-0103
Grommet, Rubber,
Nozzle Holder
4-12805025
Nozzle, SAQCMEG 2505, Green
(301001, 352007, 352001)
1
6
See Page 35 for Transformer Details
7
95-07102240
Cover, Electrical Box
Nozzle, SAQCMEG 4005, White
(301001, 352007, 352001)
1
8
10-08021
Label, Disconnect Pwr Supply 1
9
90-1991
Screw, 10/32" x 1/2"
10
4-12803500
Nozzle, SAQCMEG 0035, Red
(201501, 201507)
1
10
90-2018
Nut, Cage, 10/32" x 16 GA
6
4-12803515
Nozzle, SAQCMEG 1535, Yellow
(201501, 201507)
1
11
90-1994
Screw, 10/32" x 1-1/4"
1
12
90-017
Nut, 10/32" Keps
9
4-12803525
Nozzle, SAQCMEG 2535, Green
(201501, 201507)
1
13
6-051595
Strain Relief, STRT, L/T, LG
2
14
11-0305
Label, Control Panel
1
4-12803540
Nozzle, SAQCMEG 4035, White
(201501, 201507)
1
15
4-05088
Adjustable Thermostat
16
6-01270
▲ 1/4" Split Conduit
17
11-1042
Label, Ground
18
6-051591
Connector, 1/2", L/T 90°, Black 1
19
6-05152
Strain Relief, STRT, L/T, Sm
1
2-01403
Bushing, Snap 5/8"
1
1
See Page 35 for Fuse Details
2
See Page 35 for Fuse Details
3
6-020201
4
4-12805040
QTY
4-12804000
Nozzle, SAQCMEG 0004, Red
(201007, 201001, 301607)
1
4-12804015
Nozzle, SAQCMEG 1504, Yellow
(201007, 201001, 301607)
1
QTY
4
1
1
4 ft
1
4-12804025
Nozzle, SAQCMEG 2504, Green
(201007, 201001, 301607)
1
20
21
6-05181B
Locknut, 3/4"
2
4-12804040
Nozzle, SAQCMEG 4004, White
(201007, 201001, 301607)
1
22
6-05181A
Locknut, 1/2"
1
4-12804500
Nozzle, SAQCMEG 0004.5, Red
(301601)
1
#97-6131 / 97-6140 • Rev. 12/03
▲ Not Shown
HOT WATER PRESSURE WASHER
26
OPERATOR’S MANUAL
CONTROL PANEL
SENIOR SERIES
1
2, 8
2
24
1
25
21
15
7
19
17
16
14
9
20
18
22
8
13
23
22
6
11
12
3
4
10
5
13
#97-6131 / 97-6140 • Rev. 12/03
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
27
CONTROL PANEL PARTS LIST
SENIOR SERIES
ITEM
PART NO.
DESCRIPTION
1
6-020240
Switch, Rocker, Carling
w/Green Lens
2
Rocker Switch, Red Lens
(Auto Start)
12
95-07102201
Cover, Elec Box
1
1
13
90-1991
Screw, 10/32" x 1/2"
10
4 ft.
14
10-08018
Label, Disconnect Power
Supply
1
6-020241
▲ Conduit, 1/4" Split
2
6-01270
3
See Page 35 for Fuse Details
QTY
ITEM
11
PART NO.
DESCRIPTION
2-0103
Grommet, Rubber,
Nozzle Holder
QTY
4
4
See Page 35 for Fuse Details
15
90-2018
Nut, Cage, 10/32" x 16 ga.
6
5
See Page 35 for Transformer Details
16
90-1994
Screw, 10/32" x 1-1/4"
1
6
See Page 35 for Contactor Details
17
90-017
Nut, 10/32" Keps
4
7
6-051595
18
11-0304
Label, Control Panel
1
19
11-1042
Label, Ground
1
20
6-051591
Connector, 1/2", L/T 90°, Black 1
21
6-05152
Strain Relief, STRT, L/T, Sm
2
22
6-05181B
Locknut, 3/4"
2
23
6-05181A
Locknut, 1/2"
1
24
2-01403
Bushing, Snap 5/8"
1
25
6-051595
Strain Relief, STRT, L/T, LG
1
6-05170
Strain Relief, STRT, L/T,
(4020) LG
Strain Relief, 3/4" Watertight
(3530A)
1
1
8
4-05088
Thermostat, General 302 DGR 1
9
4-050822
Hour Meter (Optional)
10
4-12805500
Nozzle, SAQCMEG 0055, Red
(402001, 402007)
1
4-12805515
Nozzle, SAQCMEG 1505.5,
Yellow (402001, 402007)
1
Nozzle, SAQCMEG 2505.5,
Green (402001, 402007)
1
Nozzle, SAQCMEG 4005.5,
White (402001, 402007)
1
Nozzle, SAQCMEG 0004
Red (353001, 353007)
1
Nozzle SAQCMEG 1504
Yellow (353001, 353007)
1
Nozzle, SAQCMEG 2504
Green (353001, 353007)
1
Nozzle, SAQCMEG 4004
White (353001, 353007)
1
4-12805525
4-12805540
4-12804000
4-12804015
4-12804025
4-12804040
#97-6131 / 97-6140 • Rev. 12/03
1
▲ Not Shown
HOT WATER PRESSURE WASHER
28
OPERATOR’S MANUAL
FLOAT TANK OPTION EXPLODED VIEW
SENIOR SERIES
21
30
31
16
33
32
15
14
34
21
17
29
30
4
28
Steam
Option
19
11
10
13
18
9
12
20
7
24
21
7
27
7
22
1, 8
26
25
23
6
2
5
3
#97-6131 / 97-6140 • Rev. 12/03
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
29
FLOAT TANK OPTION PARTS LIST
SENIOR SERIES
QTY
ITEM
PART NO.
DESCRIPTION
QTY
19
2-3015
Valve, Flow Control
20
2-1085
Hose Barb, 1/4" Barb x 1/4" ML
Pipe
1
21
2-9040
Clamp, Hose, UNI, .46-.54
22
4-02080000
Tube, 1/4" x 1/2", Clear Vinyl,
per ft.
6 ft
23
2-1905
Strainer, 1/4" Brass
w/Check Valve
ITEM
PART NO.
DESCRIPTION
1
2-011641
Tank, Float
1
2
95-07102213
Shelf, Float Tank
1
3
90-1996
Screw, 3/8" x 3/4" HH NC, Whiz 4
4
2-00601
Elbow, 1/2" JIC x 3/8" Fem, 90° 1
5
90-19712
Screw, 5/16" x 1/2" Whiz Lock 4
6
4-02110000
Hose, 1/2", Push-On, per ft. 1.5 ft
7
2-9002
Clamp, Screw, #6
3
8
2-30122
▲ Valve, Float
1
24
2-011642
2-01021
▲ Ball Float
1
25
2-1062
Elbow, 1/2" JIC x 1/2", 90°
9
2-10861
Hose Barb, 5/8" Barb x 1/2" ML
Pipe
1
26
2-1105
Swivel, 1/2" JIC Fem, Push-On 1
27
4-02110003
Hose, 5/8" Push-On, per ft
10
2-1020
Elbow, 1/2" Female, Brass
28
90-2000
Nut, 1/4", ESNA, NC
2
11
2-10061
Modified Close Nipple, 1/2" NPT,
5/16"
1
29
90-4000
Washer, 1/4" Flat, SAE
4
30
2-1089
Hose Barb, 1/4" Barb x 1/4" Pipe,
90°
2
1
12
2-00602
Elbow, 1/2" x 1/2" Fem, 90°
1
13
4-02047722
Hose, 3/8" x 22", 2 Wire,
Pressure Loop
1
14
2-10942
Swivel, 1/2" MP x 3/4" GHF
w/Strainer
1
15
95-07162007
Hose Connection Bracket
1
16
90-1001
Bolt, 1/4" x 3/4", NC HH
2
17
90-20040
Nut, 3/8", Flange, Whiz Loc, NC 4
18
2-1003
Nipple, 1/4" Hex
#97-6131 / 97-6140 • Rev. 12/03
1
1
1
1
Cover, Float Tank, Portotenica 1
1
1 ft
31
2-30151
Valve, Flow Control w/Metering 1
32
2-0004
Nipple, 1/4" Hex Steel
33
15-070042532 Cap, Valve
with 1/4" Gauge Port
34
4-02100000
Hose, 1/4", Push-on
▲ Not Shown
1
1
0.8 ft
30
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
HOSE AND SPRAY GUN ASSEMBLY
6
8
9
10
3
2
1
5
7
Pressure Nozzle
4
ITEM
PART NO.
DESCRIPTION
2-2001
Coupler, 1/4" Male
1
2-0119
▲ Quick Coupler O-Ring, Small1
2
4-06540
▲ Nozzle Only, 1/8" Soap
1
3
4-0111341A
Wand, Zinc, VP, w/Coupler
1
83-SSVPKIT
▲ Repair Kit, Wand, SS Seat
1
1
4
4-02093450BC Hose, 50' x 3/8", 100R1,
Nomar w/Coupler
QTY
1
5
4-01246
Spray Gun, Shut-off, AP-1000 1
6
4-011184
Detergent Injector,
Non Adjust #3 (352001, 352007,
353001, 353007, 402001,
402007)
1
4-011183
Detergent Injector, Non Adjust #2
(201101, 201107)
1
#97-6131 / 97-6140 • Rev. 12/03
ITEM
PART NO.
DESCRIPTION
QTY
7
2-1904
Strainer, 1/4" Hose Barb
1
8
2-2002
Coupler, 3/8" Female
1
2-0121
▲ Quick Coupler, O-Ring,
Large
1
9
2-9040
Clamp, Hose, UNI .46-.54
2
10
4-02090000
Tube, 1/4" x 1/2"
Clear Vinyl /Ft.
6
▲ Not Shown
HOT WATER PRESSURE WASHER
31
OPERATOR’S MANUAL
STEAM OPTION
MINI, JUNIOR SERIES
1
2
ITEM
1
2
PART NO.
DESCRIPTION
2-1089
Hose Barb, 1/4" Barb x 1/4"
Pipe, 90°
2
Clamp, Hose, UNI .46-.54
2
2-9040
QTY
3
11
EN
OP R
FO M
EA
ST 9011
10-9
3
2-30151
Valve, Flow Control w/Metering 1
4
2-0004
Nipple, 1/4" Hex Steel
5
15-070042532 Cap, Valve with 1/4" Gauge Port
w/O-Ring
2
1-190031
10
1
4
Cap, Valve w/1/4" Gauge Port,
TT Series (General)
2
6
6-021730
Switch, Flow, MV-60
1
7
2-10942
Swivel, 1/2" MP x 3/4" GHF
w/Strainer
1
8
See Pg. 15
Unloader
1
9
See Pg. 15
Pump
1
10
10-99011
Label, Open For Steam
1
11
4-02100000
Hose, 1/4" Push-On
1 ft
12
2-0053
Elbow, 1/2" JIC x 3/8"
1
13
2-0031
Elbow, 3/8" Street, Male
1
12
8
5
6
13
2
7
1
9
STEAM OPTION
SENIOR SERIES
ITEM
1
PART NO.
DESCRIPTION
2-1089
Hose Barb, 1/4" Barb x 1/4"
Pipe, 90°
2
2
2
2-9040
Clamp, Hose, UNI .46-.54
3
2-30151
Valve, Flow Control w/Metering 1
4
2-0004
Nipple, 1/4" Hex Steel
5
15-070042532 Cap, Valve with 1/4" Gauge Port
w/O-Ring
2
1-190031
1
QTY
2
EN
OP R
FO M
EA
ST 9011
10-9
10
3
11
1
8
4
5
12
Cap, Valve w/1/4" Gauge Port,
TT Series (General)
2
6
6-021730
Switch, Flow, MV-60
1
7
2-10942
Swivel, 1/2" MP x 3/4" GHF
w/Strainer
1
8
See Pg. 18
Unloader
1
9
See Pg. 18
Pump
1
10
10-99011
Label, Open For Steam
1
11
4-02100000
Hose, 1/4" Push-On
1 ft
12
2-0053
Elbow, 1/2" JIC x 3/8"
1
13
2-0031
Elbow, 3/8" Street, Male
1
#97-6131 / 97-6140 • Rev. 12/03
6
9
2
7
1
13
32
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
BECKETT BURNER SPECIFICATIONS
Model #
Burner
Assy #
Fuel Nozzle
Transformer
201001D
201007D
7-00009
7-00009
7-01244
7-01244
5-23581
5-23581
201101D
201107D
7-00027
7-00027
7-01215
7-01215
201501D
7-00009
201507D
7-00009
301001D
301007D
Fuel Pump/
Solenoid/Cord
Fuel
Solenoid Coil
Electrode
7-21805U
7-21805U
7-21844U
7-21844U
7-21755U
7-21755U
7-578727
7-578727
5-23581
5-23581
7-21805U
7-21805U
7-21844U
7-21844U
7-21755U
7-21755U
7-578727
7-578727
7-01244
5-23581
7-21805U
7-21844U
7-21755U
7-578727
7-01244
5-23581
7-21805U
7-21844U
7-21755U
7-578727
7-00027
7-00027
7-01245
7-01245
5-23581
5-23581
7-21805U
7-21805U
7-21844U
7-21844U
7-21755U
7-21755U
7-578727
7-578727
301601A
301607A
7-00090
7-00090
7-01245
7-01245
7-514021
7-514021
7-21174
7-21174
7-21844U
7-21844U
7-21755U
7-21755U
7-578727
7-578727
352001A
352007A
7-00090
7-00090
7-0101
7-0101
7-514021
7-514021
7-21174
7-21174
7-21844U
7-21844U
7-21755U
7-21755U
7-578727
7-578727
353001A
7-00090
7-0101
7-514021
7-21174
7-21844U
7-21755U
7-578727
353007A
353001B
353007B
353001C
7-00090
7-00090
7-00090
7-00021
7-0101
7-0101
7-0101
7-0101
7-514021
7-514021
7-514021
5-23581
7-21174
7-21174
7-21174
7-21805U
7-21844U
7-21844U
7-21844U
7-21844U
7-21755U
7-21755U
7-21755U
7-21755U
7-578727
7-578727
7-578727
7-578727
353007C
7-00021
7-0101
5-23581
7-21805U
7-21844U
7-21755U
7-578727
402001A
402007A
7-00090
7-00090
7-0101
7-0101
7-514021
7-514021
7-21174
7-21174
7-21844U
7-21844U
7-21755U
7-21755U
7-578727
7-578727
402001B
402007B
402001C
402007C
7-00090
7-00090
7-00021
7-00021
7-0101
7-0101
7-0101
7-0101
7-514021
7-514021
5-23581
5-23581
7-21174
7-21174
7-21805U
7-21805U
7-21844U
7-21844U
7-21844U
7-21844U
7-21755U
7-21755U
7-21755U
7-21755U
7-578727
7-578727
7-578727
7-578727
#97-6131 / 97-6140 • Rev. 12/03
Burner
Motor
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
WAYNE BURNER SPECIFICATIONS
Model #
Burner
Assy #
Fuel Nozzle
201001D
201007D
7-00038
7-00038
7-0106
7-0106
7-101050-001
7-101050-001
201501D
7-00038
7-0106
201507D
7-00038
7-0106
301001D
301007D
7-00038
7-00038
301601A
301607A
Transformer
Burner
Motor
Fuel Pump
Fuel Solenoid
Electrode
7-20627
7-20627
7-0009
7-0009
7-0009611
7-0009611
7-13286
7-13286
7-101050-001
7-20627
7-0009
7-0009611
7-13286
7-101050-001
7-20627
7-0009
7-0009611
7-13286
7-01061
7-01061
7-101050-001
7-101050-001
7-20627
7-20627
7-0009
7-0009
7-0009611
7-0009611
7-13286
7-13286
7-00039
7-00039
7-01061
7-01061
7-21948001
7-21948001
7-20892
7-20892
7-0009
7-0009
7-0009611
7-0009611
7-13286
7-13286
352001A
352007A
7-00039
7-00039
7-0124
7-0124
7-21948001
7-21948001
7-20892
7-20892
7-0009
7-0009
7-0009611
7-0009611
7-13286
7-13286
353001A
7-00024
7-01251
7-21153
7-20554
7-0009
7-0009611
7-13286
353007A
353001B
353007B
353001C
7-00024
7-00024
7-00024
7-00038
7-01251
7-01251
7-01251
7-01251
7-21153
7-21153
7-21153
7-101050-001
7-20554
7-20554
7-20554
7-20627
7-0009
7-0009
7-0009
7-0009
7-0009611
7-0009611
7-0009611
7-0009611
7-13286
7-13286
7-13286
7-13286
353007C
7-00038
7-01251
7-101050-001
7-20627
7-0009
7-0009611
7-13286
402001A
7-00024
7-01251
7-21153
7-20554
7-0009
7-0009611
7-13286
402007A
402001B
402007B
402001C
7-00024
7-00024
7-00024
7-00038
7-01251
7-01251
7-01251
7-01251
7-21153
7-21153
7-21153
7-101050-001
7-20554
7-20554
7-20554
7-20627
7-0009
7-0009
7-0009
7-0009
7-0009611
7-0009611
7-0009611
7-0009611
7-13286
7-13286
7-13286
7-13286
402007C
7-00038
7-01251
7-101050-001
7-20627
7-0009
7-0009611
7-13286
#97-6131 / 97-6140 • Rev. 12/03
33
34
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
PARTS SPECIFICATIONS: LEGACY PUMP
MOTOR
PUMP
Machine
Pump
Pump
Bushing
Motor
Unloader
Parts #
Unloader
Pulley
Part #
Bushing
Part #
Size
Voltage
Part #
Pulley
201107
WMH-2521F 5-1618
5-3150
NA
NA
NA
NA
1.5 HP
120v/1ph/60Hz
5-1046
NA
201007
WMH-2521F 5-1618
5-3150
NA
NA
NA
NA
1.5 HP
120v/1ph/60Hz
5-1046
NA
201507
WMH-2521F 5-1618
5-3150
NA
NA
NA
NA
2 HP
120v/1ph/60Hz
5-1047
NA
301007
WMH-1528F 5-1620
5-3150
NA
NA
NA
NA
2 HP
120v/1ph/60Hz
5-1047
NA
301607
WMH-1528F 5-1620
5-3150
NA
NA
NA
NA
3 HP
230v/1ph/60Hz
5-1048
NA
352007
WMH-2035 5-1621
5-3150
NA
NA
NA
NA
5 HP
230v/1ph/60Hz
5-1053
NA
402007A
TML-3053
5-1651
5-3151 2AK64H 5-40206401 24 MM
5-512024
6 HP
230v/1ph/60Hz
5-10401
2AK41H
402007B
TML-3053
5-1651
5-3151 2AK64H 5-40206401 24 MM
5-512024
6 HP
230v/3ph/60Hz
5-1011
2AK41H
402007C
TML-3053
5-1651
5-3151 2AK64H 5-40206401 24 MM
5-512024
6 HP
230v/3ph/60Hz
5-1011
2AK41H
353007A
TML-3053
5-1651
5-3151 2BK70H 5-40507001 24 MM
5-512024 7.5 HP
230v/1ph/60Hz
5-1013
2BK45H
353007B
TML-3053
5-1651
5-3151 2BK70H 5-40507001 24 MM
5-512024 7.5 HP
230v/3ph/60Hz
5-10145
2BK45H
353007C
TML-3053
5-1651
5-3151 2BK70H 5-40507001 24 MM
5-512024 7.5 HP
230v/3ph/60Hz
5-10145
2BK45H
Part #
Pulley
Motor
PARTS SPECIFICATIONS: GENERAL PUMP
Motor
PUMP
Machine
Pump
Pump
Bushing
Motor
Model
Model
Part #
Unloader
Pulley
Part #
Bushing
Part #
Size
Voltage
Part #
Pulley
201101
TT-9061
5-23001
5-3024
NA
NA
NA
NA
1.5 HP
120v/1ph/60Hz
5-1046
NA
201001
TT-9061
5-23001
5-3024
NA
NA
NA
NA
1.5 HP
120v/1ph/60Hz
5-1046
NA
201501
TT-9061
5-23001
5-3024
NA
NA
NA
NA
2 HP
120v/1ph/60Hz
5-1047
NA
301001
TT-9071
5-23010
5-3024
NA
NA
NA
NA
2 HP
120v/1ph/60Hz
5-1047
NA
301601
TT-9071
5-23010
5-3024
NA
NA
NA
NA
3 HP
230v/1ph/60Hz
5-1048
NA
352001
TT-2035
5-2303
5-3024
NA
NA
NA
NA
5 HP
230v/1ph/60Hz
5-1053
NA
402001A
T-1011
5-2304
5-3025 2AK64H 5-40206401 24 MM
5-512024
6 HP
230v/1ph/60Hz
5-10401
2AK41H
402001B
T-1011
5-2304
5-3025 2AK64H 5-40206401 24 MM
5-512024
6 HP
230v/3ph/60Hz
5-1011
2AK41H
402001C
T-1011
5-2304
5-3025 2AK64H 5-40206401 24 MM
5-512024
6 HP
230v/3ph/60Hz
5-1011
2AK41H
353001A
TS-2021
5-2307
5-3025 2BK80H 5-40508001 24 MM
5-512024 7.5 HP
230v/1ph/60Hz
5-1013
2BK45H
353001B
TS-2021
5-2307
5-3025 2BK80H 5-40508001 24 MM
5-512024 7.5 HP
230v/3ph/60Hz
5-10145
2BK45H
353001C
TS-2021
5-2307
5-3025 2BK80H 5-40508001 24 MM
5-512024 7.5 HP
230v/3ph/60Hz
5-10145
2BK45H
#97-6131 / 97-6140 • Rev. 12/03
Pulley
Motor
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
MOTOR
CONTROLS
Model
Pulley
Bushing
Belt
Belt
Motor
(Con't)
Part #
Bushing
Part #
Size
Part #
Contactor
Overload
201107
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
201007
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
201507
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
301007
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
301607
NA
NA
NA
NA
NA
NA
NA
6-60101
6-02294
6-022970
NA
NA
352007
NA
402007A
5-40204101
Hx1-1/8" 5-511113
402007B
5-40204101
Hx1-1/8" 5-511113
402007C
5-40204101
Hx1-1/8" 5-511113
353007A
5-40504501
Hx1-3/8" 5-511138
353007B
5-40504501
353007C
5-40504501
Stepdown
Primary
Transformer Fuse Part #
Secondary
Fuse Part #
NA
NA
NA
NA
6-60101
6-02294
6-022970
AX 31(2)
5-602031
6-4018
NA
6-60101
6-02294
6-022970
AX 31 (2)
5-602031
6-4010
6-5011
6-60101
6-02294
6-022970
AX 31(2)
5-602031
6-4004
6-5009
6-60021
6-022910
6-02306
BX 35 (2)
5-604035
6-4018
6-5015
6-60101
6-02294
6-022970
Hx1-3/8" 5-511138
BX 35 (2)
5-604035
6-4010
6-5013
6-60101
6-02294
6-022970
Hx1-3/8" 5-511138
BX 35 (2)
5-604035
6-4004
6-5010
6-60021
6-022910
6-02306
Primary
Secondary
MOTOR
CONTROLS
Model
Pulley
Bushing
Belt
Belt
Motor
(Con't)
Part #
Bushing
Part #
Size
Part #
Contactor
Stepdown
Overload Transformer
Fuse Part #
Fuse Part #
201101
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
201001
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
201501
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
301001
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
301601
NA
NA
NA
NA
NA
NA
NA
6-60101
6-02294
6-022970
NA
NA
NA
NA
NA
NA
NA
6-60101
6-02294
6-022970
402001A
352001
5-40204101 Hx1-1/8"
5-511113
AX 31 (2)
5-602031
6-4018
NA
6-60101
6-02294
6-022970
402001B
5-40204101 Hx1-1/8"
5-511113
AX 31 (2)
5-602031
6-4010
6-5011
6-60101
6-02294
6-022970
402001C
5-40204101 Hx1-1/8"
5-511113
AX 31 (2)
5-602031
6-4004
6-5009
6-60021
6-022910
6-02306
353001A
5-40504501 Hx1-3/8"
5-511138
BX 36 (2)
5-604036
6-4018
6-5015
6-60101
6-02294
6-022970
353001B
5-40504501 Hx1-3/8"
5-511138
BX 36 (2)
5-604036
6-4010
6-5013
6-60101
6-02294
6-022970
353001C
5-40504501 Hx1-3/8"
5-511138
BX 36 (2)
5-604036
6-4004
6-5010
6-60021
6-022910
6-02306
#97-6131 / 97-6140 • Rev. 12/03
35
36
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
BURNER WILL NOT
LIGHT
Disconnected or short in electrical
wiring
All wire contacts should be clean and tight. No
breaks in wire.
Burner motor thermal protector
tripped
If tripped, check voltage, connections and
extensions for cause. Check fuel pump shaft
rotation for binding, causing motor to overheat.
ON-OFF switch defective
Check continuity through burner switch.
Heavy sooting on coil and burner,
can cause interruption of air flow and
shorting of electrodes
Clean as required.
Improper electrode setting
Clean and test according to diagram in
operator's manual.
Fuel not reaching combustion
chamber
Check fuel pump for proper flow. Check solenoid
valve on machines with spray gun control for
proper on-off flow switch.
Fuel solenoid malfunction
Check by placing screwdriver inside coil then
turn machine on, open spray gun and check for
magnetic pull.
Clogged burner nozzle
Replace.
Water not turned on
Turn on water to activate burner pressure switch.
Pressure switch malfunction
Remove, test for continuity and replace as
needed.
Improper fuel or water in fuel
Drain tank and replace contaminated fuel.
Low fuel pressure
Adjust fuel pump pressure to specifications.
Air leaks in fuel lines
Check fuel lines for leaks or air bubbles. Tighten
or replace as needed.
Plugged or dirty burner nozzle
Replace.
Faulty burner nozzle spray pattern
Replace nozzle.
Heavy accumulation of soot on coils
and burner assembly
Remove coils and burner assembly. Clean
thoroughly.
Misaligned electrode
Realign electrodes to specifications.
Fuel filter partially clogged
Replace as needed.
Obstruction in smoke stack
Check for insulation blockage or other foreign
objects.
Soot build up on coils
Clean coils with soot remover.
Lime build up in coils
Clean inside of coils using coil cleaner.
MACHINE SMOKES
#97-6131 • 97-6140 • Rev. 12/03
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
37
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
LOW WATER
TEMPERATURE
Improper fuel or water in fuel
Drain fuel tank and replace with proper fuel.
Low fuel pressure
Increase fuel pressure.
Weak fuel pump
Check fuel pump temperature. Replace pump
if needed.
Fuel filter partially clogged
Replace as needed.
Soot build up on coils
Clean coils with soot remover.
Lime build up on coils
Clean inside of coils usings coil cleaner.
Improper burner nozzle
See Burner Specifications Pages 30-31.
Incoming water to machine warm or
hot
Lower incoming water temperature.
Fuel pump pressure too high
Lower fuel pressure.
Fuel pump defective
Replace fuel pump.
Detergent line sucking air
Tighten all clamps. Check detergent line for
holes.
Defective high limit switch (thermostat)
Replace.
Incorrect fuel nozzle size
See Burner Specifications Pages 30-31.
Insufficient water supplied
Check GPM to machine.
Restricted water flow
Check nozzle for obstruction, proper size.
WATER
TEMPERATURE
TOO HOT
#97-6131 • 97-6140 • Rev. 12/03
38
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
LOW OPERATING
PRESSURE
Faulty pressure gauge
Install new gauge.
Insufficient water supply
Use larger garden hose; clean filter washer at water
inlet.
Old, worn or incorrect spray nozzle Match nozzle number to machine and/or replace
with new nozzle.
DETERGENT NOT
DRAWING
PUMP RUNNING
NORMALLY BUT
PRESSURE LOW ON
INSTALLATION
FLUCTUATING
PRESSURE
PUMP NOISY
#97-6131 • 97-6140 • Rev. 12/03
Plumbing or hose leak
Check plumbing system for leaks. Retape leaks with
teflon tape.
Faulty or misadjusted unloader
valve (where applicable)
Adjust unloader for proper pressure. Install repair kit
when needed.
Worn packing in pump
Install new packing kit.
Fouled or dirty inlet or discharge
valves in pump
Clean inlet or discharge valves.
Worn inlet or discharge valves
Replace with valve kit.
Air leak
Tighten all clamps. Check detergent lines for holes.
Valve in the injector head may be
blocked, dirty or damaged
Clean or replace valve in injector.
Filler screen on detergent suction
hose plugged
Clean or replace.
Dried up detergent plugging
metering valve
Disassemble and clean thoroughly.
High viscosity of detergent
Dilute detergent to specifications.
Hole in detergent line(s)
Repair hole.
Low detergent level
Add detergent if needed.
Discharge water temperature
above 180oF.
Lower discharge water temperature.
Pump sucking air
Check water supply and possibility of air seepage.
Valves sticking
Check and clean or replace if necessary.
Unloader valve seat faulty
Check and replace if necessary.
Nozzle incorrectly sized
Check and replace if necessary (See serial plate for
proper size).
Worn piston packing
Check and replace in necessary.
Valves worn
Check and replace if necessary.
Blockage in valve
Check and replace if necessary.
Pump sucking air
Check water supply and air seepage at joints in
suction line.
Worn piston packing
Check and replace if necessary.
Air in suction line
Check water supply and connections on suction line.
Broken or weak inlet or discharge
valve springs
Check and replace if necessary.
Excessive matter in valves
Check and clean if necessary.
Worn bearings
Check and replace if necessary.
HOT WATER PRESSURE WASHER
OPERATOR’S MANUAL
39
PREVENTATIVE MAINTENANCE
This pressure washer was produced with the best available materials and quality craftsmanship. However, you as the
owner have certain responsibilities for the correct care of the equipment. Attention to regular preventative maintenance procedures will assist in preserving the performance of your equipment. Contact your Shark Pressure Washers dealer for maintenance. Regular preventative maintenance will add many hours to the life of your pressure
washer. Perform maintenance more often under severe conditions.
MAINTENANCE SCHEDULE
Replace Fuel Lines
Pump Oil
Annually
Inspect
Daily inspect the oil level
Change
After first 50 hours, then every 500 hours or annually
Clean Burner Filter
Monthly (More often if fuel quality is poor)
Remove Burner Soot
Annually
Burner Adjustment/Cleaning
Annually
Descale Coil
Annually (More often if required)
Replace High Pressure Nozzle
Every 6 months
Replace Quick Connects
Annually
Clean Water Screen/Filter
Weekly
Clean Float/Supply Tank
Every 6 months
Replace HP Hose
Annually if there is any sign of wear
Grease Motor
Every 10,000 hours
Replace Burner Nozzle
Annually
OIL CHANGE RECORD
Date Oil Changed
Month/Day/Year
#97-6131 / 97-6140 • Rev. 12/03
Estimated Operating
Hours Since Last
Oil Change
Date Oil Changed
Month/Day/Year
Estimated Operating
Hours Since Last
Oil Change
HPB SERIES PRESSURE WASHER
WARRANTY
SHARK LIMITED NEW PRODUCT WARRANTY
PRESSURE WASHERS
WHAT THIS WARRANTY COVERS
All SHARK PRESSURE WASHERS are warranted by SHARK to the original purchaser to be free from defects in materials and
workmanship under normal use, for the periods specified below. This Limited Warranty is subject to the exclusions shown below,
is calculated from the date of the original purchase, and applies to the original components only. Any parts replaced under this
warranty will assume the remainder of the part’s warranty period. This warranty applies to the original purchaser and is not
transferable.
LIMITED LIFETIME PARTS WARRANTY:
Components manufactured by SHARK, such as frames, handles, coil wraps, float tanks, and belt guards. Forged brass pump
manifold. All heating coils will have a three year warranty. Internal components on the oil-end of all pressure washer pumps will
have a seven year warranty.
ONE YEAR PARTS WARRANTY:
All other components, excluding normal wear items as described below, will be warranted for one year on parts. Warranty on
these parts will be for one year regardless of the duration of the original component manufacturer’s part warranty.
WARRANTY PROVIDED BY OTHER MANUFACTURERS:
Motors, generators, and engines, which are warranted by their respective manufacturers, are serviced through these manufacturers’ local authorized service centers. SHARK cannot provide warranty on these items.
WHAT THIS WARRANTY DOES NOT COVER
This warranty does not cover the following items:
1. Normal wear items, such as nozzles, guns, discharge hoses, wands, quick couplers, seals, filters, gaskets, O-rings,
packings, pistons, pump valve assemblies, strainers, belts, brushes, rupture disks, fuses, pump protectors.
2. Damage or malfunctions resulting from accidents, abuse, modifications, alterations, incorrect installation, improper
servicing, failure to follow manufacturer’s maintenance instructions, or use of the equipment beyond its stated usage
specifications as contained in the operator’s manual.
3. Damage due to freezing, chemical deterioration, scale buildup, rust, corrosion, or thermal expansion.
4. Damage to components from fluctuations in electrical or water supply.
5. Normal maintenance service, including adjustments, fuel system cleaning, and clearing of obstructions.
6. Transportation to service center, shop labor charges, field labor charges, or freight damage.
WHAT YOU MUST DO TO OBTAIN WARRANTY SERVICE
While not required for warranty service, we request that you register your SHARK pressure washer by returning the completed
registration card. In order to obtain warranty service on items, you must return the product to an Authorized SHARK Dealer,
freight prepaid, with proof of purchase, within the applicable warranty period. If the product is permanently installed, you must
notify your Authorized SHARK Dealer of the defect. The Authorized Dealer will file a claim, which must subsequently verify the
defect. In most cases, the part must be returned to SHARK freight prepaid with the claim. For warranty service on components
warranted by other manufacturers, the Authorized Dealer can help you obtain warranty service through these manufacturers’
local authorized service centers.
LIMITATION OF LIABILITY
SHARK’S liability for special, incidental, or consequential damages is expressly disclaimed. In no event shall SHARK’S liability
exceed the purchase price of the product in question. SHARK makes every effort to ensure that all illustrations and specifications are correct, however, these do not imply a warranty that the product is merchantable or fit for a particular purpose, or that
the product will actually conform to the illustrations and specifications. THE WARRANTY CONTAINED HEREIN IS IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. SHARK does not authorize any other party, including authorized Dealers, to make any representation or
promise on behalf of SHARK, or to modify the terms, conditions, or limitations in any way. It is the buyer’s responsibility to ensure
that the installation and use of SHARK products conforms to local codes. While SHARK attempts to assure that its products
meet national codes, it cannot be responsible for how the customer chooses to use or install the product.
SHARK PRESSURE WASHERS
1-360-833-9100 • 1-800-771-1881 • www.shark-pw.com
#97-6131 • Rev. 12/03
Form #97-6131 • Revised 12/03 • Printed in U.S.A.