PORTABLE & MOBILE - Motorola Solutions

ASTRO 25
ACCESSORIES
AND
BATTERIES
FOR MOTOROLA PORTABLE AND MOBILE TWO-WAY RADIOS
PORTABLE RADIOS
XTS® 5000 / XTS 2500 / XTS 1500
MTTM 1500
PR1500
MOBILE RADIOS
XTLTM 5000 / XTL 2500
PM1500TM
PORTABLE AND MOBILE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
XTL 5000–ASTRO CONTROL HEADS, XTL 1500/2500/5000 O5 CONTROL HEADS, AND PM1500
SAFETY
DOESN’T END
WITH THE RADIO
In an emergency, your radio is your lifeline and can mean
the difference between survival and tragedy. Accessories are
critical to that lifeline as well. Every Motorola battery, charger,
audio accessory, carry case, mounting hardware, cable and
antenna is best-in-class technology, designed and optimized
specifically for the rugged connector on your ASTRO 25
portable and mobile radios.
Portable Radios
Audio
Surveillance
Headsets
Carry Accessories
Batteries
IMPRES Systems
Chargers and Conditioning Systems
Vehicular Accessories
Antennas
[2-3]
[4-5]
[6-9]
[10-11]
[12]
[13]
[14-15]
[16-17]
[18]
Mobile Radios
Microphones and Audio
Public Address and Speakers
Control Station
Switches, Cables and Trunnions
Laird Antennas
Laird Antenna Mounts
Antennas
[19]
[20]
[20]
[21]
[22-23]
[24]
[25]
PROVIDE
BETTER
SECURITY
It’s three weeks before an election, political
fever is running high and a massive rally is
planned. The communications director must
ensure that his officers and security personnel
have two-way radios and batteries that will keep
working. Using the Motorola IMPRES Battery Fleet
Management system, the department can automatically detect and replace all batteries that are
unable to hold a full charge, enabling security to
coordinate efforts to secure the event through a
long day of crowd control.
PAGE 1
PORTABLE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
MICROPHONES
GPS II REMOTE SPEAKER MICROPHONE
The GPS II microphones are engineered to significantly improve safety and response time. With increased
accuracy to within 15 meters–95% of the time–and with polling rates as low as 30 seconds, they automatically track your people by satellite, anywhere outdoors. Programmable polling lets you determine how
often to track your responders to better optimize accuracy, battery life and channel traffic. These GPS II
microphones utilize power directly from the radio, so they never need to be charged separately. Both
models have a channel selector, programmable button, emergency button and volume control.
HMN4106
For XTS 2500: Models I, 1.5, II, III and Rugged. XTS 2500 radios must have Tanapa version B hardware and a radio host code of R10.00.00.
For XTS 5000: Models I, II, III and Ruggedized. Radios must have a radio host code of R06.01.00 or later.
ASTRO Digital XTS 2500/5000
GPS II Remote Speaker Microphone, Windporting, IP57 Submersible (Rugged2)
GPS II Remote Speaker Microphone with 3.5mm audio jack, Windporting
HMN4106
HMN4107
If an Intrinsically Safe model is required, please purchase our original GPS microphones:
GPS Remote Speaker Microphone, IP57 Submersible (Rugged2)
GPS Remote Speaker Microphone with 3.5mm audio jack
1
HMN4080A
HMN4084A
1
WINDPORTING REMOTE SPEAKER MICROPHONES (RSM)
The windporting feature dramatically lessens background noise from high winds and other severe weather conditions. IP57
Submersible model tested at 1 meter for 30 minutes. These Remote Speaker Microphones have a 6-foot coiled cord assembly,
swivel clip and quick disconnect latch.
1
PMMN4038A
PMMN4051B
1
0104023J42
0104034J91
Windporting Remote Speaker Microphone, IP57 Submersible
Windporting Remote Speaker Microphone with 3.5mm audio jack
at the head of the microphone and threaded jack at the accessory connector
Replacement Coil Cord Assembly for PMMN4038A
Replacement Coil Cord Assembly for PMMN4051A
NOISE-CANCELING REMOTE SPEAKER MICROPHONES (RSM)
When a user speaks directly into a noise-canceling remote speaker microphone, the noise-canceling acoustics utilize a directional
microphone that is designed to eliminate ambient noise–ideal for outdoor communication. This Remote Speaker Microphone is
water-resistant and has a 6-foot coiled cord assembly, 3.5mm audio jack on the head of the microphone and threaded jack at the
accessory connector, swivel clip and quick disconnect latch.
1
PMMN4045B
0104034J90
1
1
1
1
ASTRO Digital XTS 3000/5000
Remote Speaker Microphone, Submersible (Rugged2)
Remote Speaker Microphone with 3.5mm audio jack
Remote Speaker Microphone with Channel Selector, Submersible (Rugged2)
Remote Speaker Microphone with Channel Selector and 3.5mm audio jack
For a completely submersible radio/microphone system use RMN5066 or RMN5088 with XTS 3000R and XTS 5000R portable radios.
PAGE 2
RMN5066B
Noise-Canceling Remote Speaker Microphone
Replacement Coil Cord Assembly for PMMN4045A
REMOTE SPEAKER MICROPHONES–COMMANDERTM II SERIES
The Commander II Remote Speaker Microphone features an orange emergency button, volume control, and 2 programmable buttons. These microphones feature windporting technology and are ideal for firefighters and police. The Rugged submersible model
exceeds industry standards for submergibility and provides a higher level of water protection.
RMN5066B
RMN5067B
RMN5088B
RMN5089B
PMMN4038A
1
Intrinsically Safe: Motorola approved accessories are a critical part of the specific radio and accessory system certified by a recognized
testing organization as intrinsically safe. Non-Motorola approved accessories are not certified as part of the overall Motorola portable
radio system. Use of non-Motorola approved accessories could result in equipment that is unapproved or unsafe in a hazardous environment.
2
Rugged accessories and batteries exceed industry standards (IPx7) for submersibility and provide a higher level of water protection–
MIL-STD-810E, Method 512.3 Immersion. These accessories and batteries meet the incremental requirement of submersion in 1 meter
of fresh water that is 27˚C colder than the product.
RMN5089B
PORTABLE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
MICROPHONES AND AUDIO ACCESSORIES
REMOTE SPEAKER MICROPHONE WITH ORANGE PROGRAMMABLE BUTTON
This microphone offers high/low volume control and has a 3.5mm audio jack on the microphone head. Emergency activation
from the RSM is delayed until programmed Mandown Pre-alert and Post-alert delays elapse. Depending on radio model,
factory defaults or previous programming could set the delay times for as long as 8 to 120 seconds.
RMN5038A1
RMN5038A
Remote Speaker Microphone with Orange Programmable Button
REMOTE SPEAKER MICROPHONE AUDIO ACCESSORIES
The following earpieces are compatible with all Remote Speaker Microphones with a 3.5 mm audio jack on the head
of the microphone.
1
RLN4941A
AARLN4885B
WADN4190B
PMLN4620A
1
1
1
Receive-Only Earpiece with Translucent Tube and Rubber Eartip
Receive-Only Covered Earbud
Receive-Only Flexible Earpiece
Receive-Only D-Shell Earpiece
PUBLIC SAFETY MICROPHONES (PSM)
Public Safety Microphones include straight cord assembly, swivel clip, quick disconnect latch, high/low volume toggle switch
and 3.5mm audio jack. Use with radio’s antenna, which must be ordered separately.
1
NMN6247A
NMN6250A
NMN6251A
NTN8327B
6685687A02
1
1
1
1
RMN5072B
RMN5073B
RMN5074B
RLN5918A
1
1
ASTRO Digital XTS 5000/3500/3000
3.5mm threaded audio jack is located at the radio connector
UHF Public Safety Microphone with 30 inch Straight Cord. Requires RF adapter.
UHF Public Safety Microphone with 24 inch Straight Cord. Requires RF adapter.
UHF Public Safety Microphone with 18 inch Straight Cord. Requires RF adapter.
RF Adapter. Required for use with all UHF Public Safety Microphones.
RF Adapter Tool
AARLN4885B
ASTRO Digital XTS 2500/1500, MT 1500 and PR1500
3.5mm non-threaded audio jack is located on the microphone head. Not for VHF use.
Public Safety Microphone with 30 inch Straight Cord. RF adapter included.
Public Safety Microphone with 24 inch Straight Cord. RF adapter included.
Public Safety Microphone with 18 inch Straight Cord. RF adapter included.
Replacement RF Adapter
NMN6250A
RLN4941A
WADN4190A
RMN5073B
PMLN4620A
EPAULET STRAPS
Black leather Epaulet Strap secures Remote Speaker Microphone to epaulet on shirt or
jacket and accommodates back clip in leather cut-outs. Snap closure secures cord to
allow reliable communications in hostile environments.
RLN4294A
RLN4295A
Epaulet Strap, Velcro
Epaulet Strap, with Clip
RLN4294A
RLN4295A
PAGE 3
PORTABLE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
SURVEILLANCE KITS AND ACCESSORIES
SURVEILLANCE KITS
Surveillance accessories allow the user to receive messages privately through the earpiece–ideal when discreet
communication is required. The following surveillance accessories require the 3.5mm threaded adapter jack BDN6676D
that attaches to the radio, unless being used with XTS 5000/3500/3000 UHF Public Safety Microphones.
1-WIRE SURVEILLANCE KITS
BDN6664A
Receive-Only Earpiece with Standard Earphone (1-Wire), Beige
BDN6665A
Extra Loud Receive-Only Earpiece with Standard Earphone (1-Wire), Beige
BDN6726A
Receive-Only Earpiece with Standard Earphone (1-Wire), Black
BDN6727A
Extra Loud Receive-Only Earpiece with Standard Earphone (1-Wire), Black
BDN6666A
Receive-Only Earpiece with Volume Control and Earloop (1-Wire), Beige
For XTS 2500/1500, MT 1500 and PR1500 only.
BDN6728A
Receive-Only Earpiece with Volume Control and Earloop (1-Wire), Black
For XTS 2500/1500, MT 1500 and PR1500 only.
BDN6668A
1
1, 2
1
1, 2
1
1
RLN5312B
2-WIRE SURVEILLANCE KITS
Earpiece with Microphone and Push-to-Talk Combined (2-Wire), Beige
Extra Loud Earpiece with Microphone and Push-to-Talk Combined (2-Wire), Beige
Earpiece with Microphone and Push-to-Talk Combined (2-Wire), Black
Extra Loud Earpiece with Microphone and Push-to-Talk Combined (2-Wire), Black
3-WIRE SURVEILLANCE KITS
Earpiece with Microphone and Push-to-Talk Separate (3-Wire), Beige
Extra Loud Earpiece with Microphone and Push-to-Talk Separate (3-Wire), Beige
Earpiece with Microphone and Push-to-Talk Separate (3-Wire), Black
Extra Loud Earpiece with Microphone and Push-to-Talk Separate (3-Wire), Black
1
BDN6667A
BDN6669A
BDN6729A
BDN6731A
1, 2
1
1, 2
1
BDN6668A
BDN6670A
BDN6730A
BDN6732A
1, 2
1
1, 2
SURVEILLANCE KITS–WITH EXTENDED-WEAR COMFORT EARPIECE
These kits include an extended-wear comfort earpiece with rubber eartip and Quick Disconnect clear,
comfortable acoustic tube. Users hear transmissions clearly, and the clear tube provides a discreet appearance.
RLN5314A
RLN5313B
RLN5312B
Comfort Earpiece, Receive-Only, Beige
Comfort Earpiece, Receive-Only, Black
Earpiece with Microphone and Push-to-Talk Combined (2-Wire), Black
QUICK DISCONNECT NOISE KITS
Extreme Noise Kits provide extra comfort and/or noise protection for users wearing surveillance accessories. Lightweight,
translucent tube attaches to Motorola surveillance accessories to provide flexibility and comfort, which now includes a new
quick disconnect adapter. The Quick Disconnect Adapter allows users, especially those in multiple shift operations, to easily
remove or alternate acoustic tubes. Clothing clip prevents accessory from being pulled from the ear due to body movement
or head rotation. For optimal performance, Extra Loud Earphones are recommended.
RLN6230A
5080369E39
5080370E91
Extreme Noise Kit. Includes 2 foam earplugs. For high-noise environments. `
Noise reduction = 24dB. Can be used with Clear Comfortable Earpieces, Black
Extreme Noise Kit. Includes 2 foam earplugs. For high-noise environments.
Noise reduction = 24dB. Can be used with Clear Comfortable Earpieces, Beige
Low Noise Kit–Clear Acoustic Tube Assembly. Includes 1 clear rubber eartip.
For low-noise environments, does not provide hearing protection, Black
Low Noise Kit–Clear Acoustic Tube Assembly. Includes 1 clear rubber eartip.
For low-noise environments, does not provide hearing protection, Beige
Extra Loud Earphone, Beige
Extra Loud Earphone, Black
RLN6242A
5080384F72
5080370E97
BDN6676D
REPLACEMENT ACCESSORIES
Quick Disconnect Acoustic Tube Replacement
Replacement Foam Plugs. Noise reduction = 24dB. Pack of 50. For RLN6230A and RLN6231A.
Replacement Standard Clear Rubber Eartips. Pack of 25. For RLN6232A and RLN6241A.
3.5 mm Threaded adapter jack with Quick Disconnect Latch
RLN6231A
RLN6232A
RLN6241A
2
2
1
Intrinsically Safe: Motorola approved accessories are a critical part of the specific radio and accessory system certified by a
recognized testing organization as intrinsically safe. Non-Motorola approved accessories are not certified as part of the overall
Motorola portable radio system. Use of non-Motorola approved accessories could result in equipment that is unapproved or unsafe
in a hazardous environment.
1
PAGE 4
Extra Loud Earphone (exceeds OSHA limits).
2
RLN6230A
RLN6241A
BDN6676D
PORTABLE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
SURVEILLANCE ACCESSORIES
CLEAR COMFORTABLE EARPIECES
The Clear Comfortable Earpiece forms to the inside of the ear and is perfect
for low noise environments. It’s made of easy-to-clean, chemically-inert
hypo-allergenic material.
RLN4760A
RLN4761A
RLN4762A
RLN4763A
RLN4764A
RLN4765A
Small Custom Earpiece–Right Ear
Medium Custom Earpiece–Right Ear
Large Custom Earpiece–Right Ear
Small Custom Earpiece–Left Ear
Medium Custom Earpiece–Left Ear
Large Custom Earpiece–Left Ear
COMPLETELY DISCREET WIRELESS EARPIECE KIT
Enables users to communicate with ease, in full privacy, without visible equipment.
This miniaturized receiver is discreetly hidden in the ear, where it can be worn comfortably
for long periods of time. Small as it is, it offers a full range of audio functions including
automatic squelch, automatic gain control and noise filtering. Average battery life is
approximately 100 hours and includes an end-of-life warning signal when the battery
needs to be changed. Kit includes wireless receiver, inductive neckloop, 6 spare batteries
and 5 spare earguards. For use with any standard 2 or 3-Wire Motorola Surveillance Kit.
Simply remove the earpiece from any standard 2 or 3-Wire Surveillance Kit and plug in
the neckloop, which is easily hidden under clothing.
RLN4922A
RLN4919A
Clear
Comfortable
Earpieces
RLN4922A
Completely
Discreet Earpiece
Receiver
Completely Discreet Earpiece Kit
Replacement Earguards. 5 per pack.
EAR MICROPHONE SYSTEMS (EMS)
This streamlined unit picks up sound through bone vibrations in the ear canal giving emergency
personnel the ability to hear and speak directly to others on the scene. EMS may be worn with
protective masks without reduction in clarity of sound. It’s ideal for high-noise environments.
1
PMLN5464
PMLN5464
Ear Microphone System with Bone Conduction
1
BDN6708
BDN6671
0180300E25
0180358B38
0180300E83
0180358B32
0180358B33
0180358B34
0180358B35
0180358B36
0180358B37
4280369E44
5080358B28
5080358B29
5080358B30
5080358B31
1
1
1
OPTIONAL ACCESSORIES
Legacy Replacement Interface Module
Legacy Replacement Interface Module
Earguard with Adjustable Loop
Remote Push-to-Talk Ring Switch
Remote Push-to-Talk Body Switch
Earholder. Black, size small. Secures Ear Microphone in ear.
Earholder. Black, size medium. Secures Ear Microphone in ear.
Earholder. Black, size large. Secures Ear Microphone in ear.
Earholder. Clear, size small. Secures Ear Microphone in ear.
Earholder. Clear, size medium. Secures Ear Microphone in ear.
Earholder. Clear, size large. Secures Ear Microphone in ear.
Replacement Belt Clip with Screws
Eartips. Black, size medium. Pack of 10.
Eartips. Black, size large. Pack of 10.
Eartips. Beige, size medium. Pack of 10.
Eartips. Beige, size large. Pack of 10.
0180300E83
0180300E25
PAGE 5
PORTABLE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
COMMPORT
NTN1624A
Integrated Ear Microphone/Receiver
System with Palm Push-to-Talk
NTN1663A
COMMPORT: INTEGRATED MICROPHONE/RECEIVER SYSTEM
The CommPortTM System’s advanced, self-adjusting microphone and miniature
receiver connect to a two-way radio and make it possible to communicate under
the most adverse conditions. A variety of push-to-talk options allow the user to
customize the CommPort system for many applications.
1
NTN1624A
1
NTN1625A
NTN1736A
1
NTN1663A
1
NTN1736A
NNTN4186A
NNTN4186A
NKN6510A
NKN6512A
NKN6525A
NNTN4188A
NKN6508A
NTN8819B
NTN8821A
1
NTN8986A
NTN8988A
RLN5037A
4285838B01
4202006A01
BDN6676D
1
Integrated Ear Microphone/Receiver System with
Palm Push-to-Talk Includes 3.5mm adapter BDN6676D.
Integrated Ear Microphone/Receiver System with Push-to-Talk
on Radio Adapter. Includes 3.5mm adapter BDN6676D.
Integrated Ear Microphone/Receiver System with
Ring Push-to-Talk. Includes 3.5mm adapter BDN6676D.
Integrated Ear Microphone/Receiver System with Snap-On-Side
Push-to-Talk. Includes 3.5mm adapter BDN6676D.
Integrated Ear Microphone/Receiver System with
Body Push-to-Talk. Includes 3.5mm adapter BDN6676D.
OPTIONAL ACCESSORIES FOR COMMPORT
Replacement Palm Push-to-Talk Cable for NTN1624A
Replacement Ring Push-to-Talk Cable for NTN1663A
Replacement Snap-On-Side Push-to-Talk Cable for NTN1736A
Replacement Remote Push-to-Talk Body Switch for NNTN4186A
Replacement Cable for NTN1625A
Ear Microphone Assembly
CommPort Maintenance Kit. Includes 10 replacement
ear tubes, 10 microphone seal strips and 2 windscreens.
Adhesive Pads. For secure attachment to ear. Pack of 90.
Ear Straps. For secure attachment to ear. Pack of 10.
Replacement Ear Tubes. Pack of 10.
Replacement Collar Clip
Replacement Back Cover Clip
3.5mm jack adapter with Quick Disconnect Latch
1
PAGE 6
NKN6525A
BDN6676D
Intrinsically Safe: Motorola approved accessories are a critical part of the specific radio and accessory system certified by a recognized
testing organization as intrinsically safe. Non-Motorola approved accessories are not certified as part of the overall Motorola portable radio
system. Use of non-Motorola approved accessories could result in equipment that is unapproved or unsafe in a hazardous environment.
PORTABLE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
HEADSETS
MISSION CRITICAL WIRELESS
This best-in-class Bluetooth wireless solution, designed specifically for first responders, provides a truly secure
link, easy pairing on the go, and instant push-to-talk in an all-day comfortable and durable earpiece. A wireless
push-to-talk is also available to allow you seamlessly and wirelessly connect with the Mission Critical
Wireless Earpiece.
PMLN5792
The earpiece and wireless push-to-talk require the Mission Critical Wireless Adapter. This adapter has a blue
light around the push-to-talk to show it’s paired with your earpiece and a toggle switch allows you to re-route
audio to your radio if needed. This adapter supports up to 2 wireless devices simultaneously.
PMLN5792
NTN2573
NTN2570
NTN2571
Mission Critical Wireless Adapter
Mission Critical Wireless Earpiece (9.5 inch cable)
Mission Critical Wireless Earpiece (12 inch cable)
Mission Critical Wireless Push-to-Talk
NTN2571
BLUETOOTH® WIRELESS HEADSET (FOR NON-MISSION CRITICAL APPLICATIONS)
This Bluetooth adapter enables connectivity with consumer off-the-shelf Bluetooth earpieces. We have
certified operation with the H300 Bluetooth headset. The H300 Bluetooth headset and adapter are sold
separately or as a kit.
RLN6379A
98682H
RMN5104A
Bluetooth Kit. Includes H300 Bluetooth headset and adapter for radios.
H300 Bluetooth Headset
Bluetooth adapter for radios
RLN6379A
FLEXIBLE EAR RECEIVER
This receive-only earpiece contains a flexible earloop and speaker which rests external to the ear. It plugs
directly into adapter BDN6676D or the audio jack on XTS 5000/3500/3000 UHF Public Safety Microphones.
BDN6719A
BDN6676D
7580372E11
1
Flexible Ear Receiver with 3.5mm threaded plug, black
3.5mm jack adapter with Quick Disconnect Latch
Replacement Foam Ear Cushion
BDN6719A
PELLET-STYLE EARPIECES
Pellet-style earpieces allow users to receive communication discreetly and are comfortable for
extended-wear use.
1
BDN6780A
BDN6781A
BDN6676D
7580372E70
1
1
Earbud with Microphone and Push-to-Talk. Requires adapter BDN6676D.
Earbud, receive-only. Requires adapter BDN6676D.
3.5mm jack adapter with Quick Disconnect Latch
Replacement Foam Cushion for Pellet Earpieces
RMN4049A
TEMPLE TRANSDUCER–BONE CONDUCTION HEADSET
This innovative headset allows the user to receive audio without covering the ear, allowing users to wear
hearing protection in noisy environments or leave their ears open to hear critical on-scene communications.
It features an in-line push-to-talk and boom microphone.
1
RMN4049A
0180305J46
Temple Transducer–Bone Conduction Headset
Training CD-ROM. For Ear Microphone System and Temple Transducer.
RUGGED TEMPLE TRANSDUCER–BONE CONDUCTION HEADSET
The larger Rugged Temple Transducer comes equipped with all the features of the basic model and sports
a bigger push-to-talk button and a larger omni-directional boom microphone. It is fully adjustable for different
head sizes, making it comfortable for extended-wear. Over-the-head band allows users to wear helmets,
hardhats and other head gear–and it really stays in place. Water-resistant boom microphone is ideal for use
in blowing rain and the secure ring around the push-to-talk prevents accidental activation in mission critical
situations.
RMN5049A
1
RMN5049A
Rugged Temple Transducer
PAGE 7
PORTABLE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
HEADSETS
COMFORT
RECEIVE-ONLY HEADSETS
Receive-Only Headsets are the right choice for high-noise environments where users must hear information clearly, but
seldom need to transmit. Dual-Muff headsets feature easily replaceable earseals filled with a liquid and foam combination
to provide excellent protection from outside noise as well as comfort. They can be plugged directly into the radio when
used with BDN6676D.
ASTRO Digital XTS 5000/3500/3000
Receive-Only Dual-Muff Headband Style Headset. For use with 3.5mm threaded
jack. Can be plugged directly into radio with 3.5mm adapter BDN6676D.
Noise reduction = 24dB.
Receive-Only, Dual-Muff, Hardhat Headset. Mounts easily to hard hats with slots.
Can be plugged directly into radio with 3.5mm adapter BDN6676D.
3.5mm jack adapter with Quick Disconnect Latch
RMN4056B
RMN4057B
1
BDN6676D
Winning Quality
The same winning
quality and dependability
you see at professional football
stadiums and speedways can be
yours with Motorola headsets.
RMN4056B
NMN6245A
LIGHTWEIGHT HEADSETS
Lightweight headsets provide high-clarity, hands-free, discreet two-way communication, while maintaining the comfort
necessary for extended-wear in moderate noise environments. Audio adapter BDN6676D required.
1
NMN6245A
NMN6246B
BDN6676D
PAGE 8
1
1
ASTRO Digital XTS 5000/3500/3000
Single-Muff Lightweight Headset with In-line Push-to-Talk Switch
Requires audio adapter BDN6676D.
Ultra-Light Headset with Boom Microphone, In-line Push-to-Talk Switch.
Earbud style receiver. Requires audio adapter BDN6676D.
3.5mm jack adapter with Quick Disconnect Latch
NMN6246B
PORTABLE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
HEADSETS
NOISE-CANCELING HEADSETS WITH BOOM MICROPHONE
Ideal for two-way communication in extremely noisy environments. Dual-Muff, tactical headsets include 2 microphones on outside of earcups which reproduce ambient sound back into
headset. Harmful sounds are suppressed to safe levels and low sounds are amplified up to 5
times original level, but never more than 82dB. Has on/off volume control on earcups. Easily
replaceable ear seals are filled with a liquid and foam combination to provide excellent sealing
and comfort. 3-foot coiled cord assembly included. Adapter Cable RKN4095A required.
RMN4052B
RMN4053B
RKN4095A
RMN4052B
Tactical Headband Style Headset. Gray, Noise reduction = 24dB.
Tactical Hardhat Mount Headset. Gray, Noise reduction = 22dB.
Adapter Cable with In-line Push-to-Talk
For use with RMN4051B/RMN4052A/RMN4053A.
REPLACEMENT EARSEALS
Replacement Earseals for RMN4051B/RMN4052A/RMN4053A
Includes 2 snap-in earseals.
RLN4923B
HARDHAT MOUNT HEADSET WITH NOISE-CANCELING BOOM MICROPHONE
Ideal for two-way communication in high-noise environments, this headset mounts easily to
hardhats with slots, or can be worn alone. Easily replaceable ear seals are filled with a liquid
and foam combination to provide excellent sealing and comfort. 3-foot coiled cord assembly
included. Noise reduction of 22dB. Separate in-line push-to-talk adapter cable RKN4095A
required. Hardhat not included.
RMN4051B
RMN4051B
Two-way, Hardhat Mount Headset with
Noise-Canceling Boom Microphone. Black.
Adapter cable with In-line Push-to-Talk. For use with
RMN4051B/RMN4052A/RMN4053A.
RKN4095A
MEDIUM WEIGHT HEADSETS
Medium weight headsets offer high-clarity sound, with the additional hearing protection
necessary to provide consistent, clear, two-way radio communication in harsh, noisy
environments or situations.
NMN6258A1
NMN6259A1
NMN6258A
Medium Weight, Dual-Muff, Over-the-Head Style Headset
with In-line Push-to-Talk. Noise reduction rating = 24dB.
Medium Weight, Dual-Muff, Behind-the-Head Style Headset
Can be worn with hardhat. Noise reduction rating = 24dB.
HEAVY-DUTY HEADSETS
Heavy-duty headsets include noise-canceling boom microphones and can be worn with
or without a hardhat. The push-to-talk switch is located on the earcup. On voice-activated
models, the VOX module is contained within the headset. Headsets are for use in noise
levels up to 125dB.
PMLN5278B
1
Push-to-Talk Headset with Boom Microphone
Noise reduction rating = 24dB.
PMLN5278B
Intrinsically Safe: Motorola approved accessories are a critical part of the specific radio and accessory system
certified by a recognized testing organization as intrinsically safe. Non-Motorola approved accessories are not
certified as part of the overall Motorola portable radio system. Use of non-Motorola approved accessories
could result in equipment that is unapproved or unsafe in a hazardous environment.
1
PAGE 9
PORTABLE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
CASES AND CARRY ACCESSORIES
LEATHER AND NYLON CARRYING CASES
Motorola carry cases were developed to meet the demands of public safety and other users who operate in the most rigorous of
environments. A variety of carrying accessories are available for comfort and convenience and are available in sizes designed to
fit radios with a battery and permit audio to be heard clearly. Leather cases are constructed of top grain, 8 ounce leather and all
stainless steel hardware.
High-activity cases have a swivel D-ring button and belt loop. To remove case from belt loop, rotate case 180 degrees and slide
case upward, out of the holder. Case stays on belt more securely in high-activity applications while allowing the radio to swing
freely with body movements.
ASTRO Digital XTS 5000/3500/3000
NTN8725A
NTN8387A
NTN8385B
NTN8386B
NTN8725A
NTN8382B
NTN8380C
NTN8381C
NNTN4115A
NTN8725A
NTN9184A
NNTN4115A
NNTN4116A
NNTN4117A
NTN7247A
M O D E L I R A D I O S O N LY
Leather Carry Case with fixed belt loop, D-rings and T-strap
High-Activity Swivel Leather Case
Features 2.5 inch swivel belt loop, D-rings and T-strap.
High-Activity Swivel Leather Case
Features 3 inch swivel belt loop, D-rings and T-strap.
High-Activity Nylon Case with fixed belt loop and T-strap
M O D E L I I & I I I R A D I O S O N LY
Leather Case with fixed belt loop, D-rings and T-strap
High-Activity Swivel Leather Case
Features 2.5 inch swivel belt loop, D-rings and T-strap.
High-Activity Swivel Leather Case
Features 3 inch swivel belt loop, D-rings and T-strap.
High-Activity Nylon Case with fixed belt loop and T-strap
Leather Case with Belt Loop. For Clamshell batteries only.
NTN8381C
NTN8382B
ASTRO Digital XTS 2500/1500, MT 1500 and PR1500
Leather Case with High-Activity Swivel
Features 3 inch swivel belt loop, D-rings and T-strap.
Leather Case with High-Activity Swivel
Features 2.5 inch swivel belt loop, D-rings and T-strap.
Leather Case with fixed belt loop.
Features 3 inch belt loop, D-rings and T-strap.
Nylon Case with Snap Belt Loop and T-strap
CARRYING ACCESSORIES
NTN7247A
NTN5243A
NTN8383A
NTN8384A
C A R R Y I N G A N D T- S T R A P S
Adjustable, Black Nylon Carrying Strap. Attaches to D-ring on cases.
Leather T-strap, Plain Action Snap
Leather T-strap, Hard Action Snap. Provides additional strength
at the snap.
NTN8039B
NTN8040B
H I G H - A C T I V I T Y B E LT L O O P S
2.5 inch Leather Replacement Swivel Belt Loop
3 inch Leather Replacement Swivel Belt Loop
B E LT C L I P S A N D D - B U T T O N S
NTN8040B
NTN8039B
ASTRO Digital XTS 5000/3500/3000
Radios sold separately.
NTN8266B
NTN9212A
NTN9179A
Standard Removable 2.25 inch Belt Clip Attachment
D-button for Battery Pack
D-button with Belt Loop
ASTRO Digital XTS 2500/1500, MT 1500 and PR1500
HLN6853A
HLN9844A
PAGE 10
2.25 inch Spring Action Belt Clip
2 inch Removable Belt Clip Attachment
HLN9844A
NTN5243A
PORTABLE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
CARRY ACCESSORIES
CHEST PACK
Motorola Original® Universal Chest Pack protects the radio and provides the freedom from
holding it during standby communication mode. Universal Chest Pack fits virtually any radio.
HLN6602A
1505596Z02
HLN6602A
Universal Chest Pack with Radio Holder, Pen Holder and
Velcro Secured Pouch
Replacement Strap for HLN6602A/RLN4570A
BREAK-A-WAY CHEST PACK
All the features of the original Universal Chest Pack (HLN6602A) plus break-a-way tabs
that allow the entire pack to be pulled off with approximately 10 lbs. of pressure.
RLN4570A
1505596Z02
Break-a-Way Chest Pack with Radio Holder,
Pen Holder and Velcro Secured Pouch.
Replacement Strap for HLN6602A/RLN4570A
Chest Packs
These versatile
carry accessories
fit virtually any radio.
Lightweight and comfortable,
each of these packs make
an ideal companion
for two-way radios.
RLN4570A
UNIVERSAL RADIOPAKTM
The RadioPAk is lightweight and comfortable. Worn around the waist, it keeps radios/phones
at hand. It features a separate 6 x 8 inch zippered pouch for other on-the-job necessities.
Adjustable woven nylon belt fits both men and women.
RLN4815A
4280384F89
RadioPAk Radio/Utility Case
RadioPAk Extension Belt
For waists larger than 40 inches.
WATERPROOF BAG
HLN9985B
Waterproof Bag with Large Strap
RLN4815A
PORTABLE RADIO HANGERS
Portable Radio Hangers slide over and hangs from the vehicle door
panel allowing convenient, easy mounting. Radio belt clip required.
TDN9327A
TDN9373A
RadioPAk
Unlike rigid holders,
the universal-fit RadioPAk
is lightweight and comfortable.
An ideal companion for
two-way radios.
Portable Radio Hanger for door panels up to 2.75 inches.
Portable Radio Hanger for door panels 2.75 to 3.25 inches.
TDN9373A
TDN9327A
PAGE 11
PORTABLE RADIO : BATTERIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
BATTERIES
IMPRES™ BATTERIES
IMPRES batteries, when used with an IMPRES charger, provide automatic,
adaptive reconditioning, end-of-life display and other advanced features.
Data is stored in the battery and communicated to the charger via a unique
IMPRES communication protocol which is designed to maximize talk-time
and optimize battery cycle life–all automatically.
NNTN4435B
NNTN4436B
NNTN4437B
NTN9862C
NNTN6034A
NNTN7453A
HNN9031B
HNN9032B
ASTRO Digital XTS 5000/3500/3000
NiMH, 1800 mAh
NiMH, 1700 mAh. Intrinsically Safe1
NiMH, 1700 mAh. Intrinsically Safe1, IP572
Li-ion, 2750 mAh
Li-ion, 4150 mAh
Li-ion, 3950 mAh, Intrinsically Safe1, Rugged3
NiCd, 1525 mAh1
NiCd, 1525 mAh. lntrinsically Safe1
NTN9858C
NTN9857C
NNTN6263A
NNTN7335A
NNTN7554A
ASTRO Digital XTS 2500/1500, MT 1500 and PR1500
NiMH, 2100 mAh
NiMH, 2000 mAh. Intrinsically Safe1
NiMH, 2000 mAh. Intrinsically Safe1, IP672
Li-ion, 2700 mAh. IP672
Li-ion, 2050 mAh, slim, IP672
BATTERIES
NTN8294BR
NTN8295AR
NTN8297AR
PREMIUM NICKEL CADMIUM - NiCd
ASTRO Digital XTS 5000/3500/3000
NiCd, 1525 mAh
NiCd, 1525 mAh. Intrinsically Safe1
NiCd, 1525 mAh. Intrinsically Safe1, IP572
NTN9815B
NTN9816B
ASTRO Digital XTS 2500/1500, MT 1500 and PR1500
NiCd, 1525 mAh
NiCd, 1525 mAh. Intrinsically Safe1
NTN8299BR
NTN8923AR
RNN4006B
P R E M I U M N I C K E L M E TA L H Y D R I D E - N i M H
ASTRO Digital XTS 5000/3500/3000
NiMH, 1700 mAh. Intrinsically Safe1
NiMH, 1800 mAh
NiMH, 3000 mAh
RNN4007AR
NiMH, 3000 mAh. Intrinsically Safe1
NTN9177A
NTN9183A
P R E M I U M A L K A L I N E B AT T E RY S H E L L S
ASTRO Digital XTS 5000/3500/3000
Clamshell–Black. Twelve AA Alkaline batteries required, sold separately.
Clamshell–Orange. Twelve AA Alkaline batteries required, sold separately.
NNTN6686B
ASTRO Digital XTS 2500/1500, MT 1500 and PR1500
Clamshell–Black. Twelve AA Alkaline batteries required, sold separately.
PAGE 12
IMPRES Batteries
Battery Characteristics
NiCd batteries provide the
maximum number of charge/
discharge cycles and are best
suited for temperature extremes.
NiMH batteries provide more
talk-time per shift and are less
prone to memory effect.
Li-ion batteries offer the best
power-to-weight ratio
of all chemistries, with
no memory effect.
NTN9815B
NTN8299BR
1
Intrinsically Safe: Motorola approved accessories are a critical part of the specific radio and accessory system certified by a recognized testing organization as
intrinsically safe. Non-Motorola approved accessories are not certified as part of the overall Motorola portable radio system. Use of non-Motorola approved
accessories could result in equipment that is unapproved or unsafe in a hazardous environment.
2
International Protection (IP) is a global standard for rating dust and water protection. The first digit IP5x or IP6x represents increased levels of dust protection,
while the second digit IPx7 represents withstanding submersion in 1 meter of fresh water for 30 minutes.
3
Rugged batteries exceed industry standards (IPx7) for submergibility and provide a higher level of water protection–MIL-STD-810E, Method 512.3 Immersion.
These accessories and batteries meet the incremental requirement of submersion in 1 meter of fresh water that is 27˚C colder than the product.
PORTABLE RADIO : CHARGERS
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
IMPRES™ SMART ENERGY SYSTEMS
Our innovative IMPRES battery, charging and reconditioning system streamlines and automates battery maintenance. It
draws on our exclusive technology to enable communication between your battery and charger to lengthen battery life
and extend talk time. The IMPRES charger automatically monitors battery capacity, allowing these batteries to be left in
their IMPRES chargers for extended periods without heat damage from the charger. These chargers charge compatible
non-IMPRES batteries and supports multiple radio platforms including SABER, XTS and HT 1000 Series portables.
WPLN4111AR
IMPRES SINGLE-UNIT CHARGER
WPLN4111AR
IMPRES Single-Unit Charger, 110 Volt, US Plug
IMPRES MULTI-UNIT CHARGER WITH DISPLAY MODULES
Charger Display Modules provide powerful, “real time” analyzing information for IMPRES batteries, including current
charge status, battery mAh, percent rated capacity and battery voltage. Readout displays battery kit number, serial
number and chemistry and the time remaining to complete the charge for NiCd and NiMH batteries.
WPLN4130A
NLN7967A
WPLN4130A
IMPRES Multi-Unit Charger with Display Modules, 110 Volt, US Plug
Wall Mount for Multi-Unit Charger
IMPRES MULTI-UNIT CHARGER
WPLN4108BR
IMPRES Multi-Unit Charger, 110 Volt, US Plug
NLN7967A
Wall Mount for Multi-Unit Chargers
IMPRES INDIVIDUAL CHARGER DISPLAY MODULE
This module is compatible with the standard IMPRES™ Multi-Unit Charger WPLN4108BR, WPLN4109BR and
WPLN4110BR. Up to 6 modules can be used per charger, one for each charging pocket. Includes detailed
installation instructions.
RLN5382B
Charger Display Module for IMPRES Multi-Unit Charger with Software version 1.3 or Later.
Note: Display Modules compatible with Multi-Unit Charger with Software version 1.2 or earlier
require a software flash update.
Version number is located on label on the bottom of the IMPRES™ Multi-Unit charger. If no
version is shown, it’s earlier than version 1.2. Version 1.2 will appear as V1.20, 1.3 as V1.30, etc.
IMPRES BATTERY FLEET MANAGEMENT SOFTWARE
This industry exclusive software application automatically collects and consolidates key IMPRES battery data through
existing IMPRES chargers. These reports provide critical battery and charger data such as when IMPRES batteries are
nearing end of life, identifying lost batteries and ensuring IMPRES chargers are appropriately distributed and use is
maximized.
NNTN7676
NNTN7677
HKVN4036
RLN5382A
NNTN7392
IMPRES Battery Fleet Management Software
Multi-Unit Charger Interface Unit. Attaches to an APX, XTS, MOTOTRBO and Professional Series
IMPRES multi-unit charger to enable the data transfer to IMPRES Battery Fleet Management.
A CIU is required for each IMPRES charger that reports data to IMPRES Battery Fleet Management.
IMPRES Battery Fleet Management License Key
IMPRES BATTERY READER
The industry exclusive IMPRES Battery Reader provides IMPRES battery users the ability to access charging, reconditioning and key usage data that can affect overall battery performance. By keeping batteries in peak condition, talk time and
cycle life are optimized, reducing battery replacement. Package includes IMPRES Battery Reader (fits XTS batteries),
System Software, USB Cord, Adapter inserts for APX, MOTOTRBO and Professional Series radios.
NNTN7392
IMPRES Battery Reader
IMPRES CD
An interactive guide to the IMPRES Charging System. It outlines the benefits and gives examples of application usage.
0180305J70
IMPRES CD
PAGE 13
PORTABLE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
CHARGERS AND ACCESSORIES
SINGLE-UNIT, RAPID-RATE, UNIVERSAL CHARGER
This tri-chemistry charger supports Nickel Cadmium, Nickel Metal Hydride and Lithium-ion
batteries. It will rapid charge most batteries to 90% capacity in one to two hours and employ
trickle and maintenance modes that ensure batteries are safely charged to full-capacity.
NTN1667A
NTN1667A
Universal Charger, 110 Volt, US Plug
MOTOROLA CONDITIONING CHARGER (MCC)
The MCC features Instant Fault Detection technology that detects faulty batteries in seconds.
You'll know right away when a battery won't operate at peak performance–saving you time and
trouble. Each unit rapidly charges NiCd and NiMH batteries and optimizes battery performance.
It’s patented negative pulse charging process minimizes overheating and overcharging, extending
useful battery life. Batteries can be left on the charger for extended periods of time, without
worry of heat build-up. Optional accessories are available that allow the MCC to be used in both
AC and DC environments.
ASTRO Digital XTS 5000/3500/3000
WPLN4086CR
WPPN4002BR
WPPN4021CR
WPPN4065BR
WPPN4002BR
WPLN4168AR
WPPN4098AR
WPPN4065BR
Charger Kit, 110 Volt AC. Includes single-unit base and 7 Volt adapter plate.
110 Volt AC Single-Unit Base Charger Only. Adapter plates sold separately.
7 Volt Adapter Plate
Multi-Unit Conditioning Charger, 4-Station Base, 110 Volt.
Adapter plates sold separately.
ASTRO Digital XTS 2500/1500, MT 1500 and PR1500
Base Charge Unit, 110 Volt AC. Adapter plates sold separately.
MCC Kit, 110 Volt AC. Includes single-unit base and adapter plate
Adapter Plate Only
Multi-Unit Conditioning Charger, 4-Station Base,110 Volt.
Adapter plates sold separately.
Motorola Conditioning Chargers not compatible with
NiMH batteries RNN4006B/RNN4007AR or any Li-ion batteries.
WPPN4065BR
VEHICULAR MOUNTING
RLN4814A
3080384M21
Vehicular Mounting Bracket and Hard Wire Cable
For Single-Unit Motorola Conditioning Chargers.
Includes DC Hard Wire Cable 3080384M21.
DC Hard Wire Cable with 3 A in-line fuse.
RLN4814A
PAGE 14
WPPN4002BR
3080384G15
PORTABLE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
BATTERY MAINTENANCE AND OPTIMIZING SYSTEMS
BATTERY MAINTENANCE SYSTEMPLUS (BMSPLUS)
Using interchangeable battery adapters (sold separately), the BMSPLUS is capable of charging and
discharging, analyzing, conditioning and cycle testing NiCD, NiMH and Li-Ion batteries.
The BMSPLUS offers a 3-year warranty and includes serial printer* port (RS-232).
WPLN4079BR
WPPN4085AR
NDN4005B
NDN4006B
WPLN4079BR
6-Station BMSPLUS, 110 Volt AC, 50/60 Hz, US Plug
BMSPLUS Li-ion Field Upgrade Kit. Upgrades WPLN4079AR, WPLN4080AR,
WPLN4081AR. Allows units to support Li-ion batteries.
3-Station BMS, 110 Volt AC, 50/60 Hz. Does not support Li-ion or 3-cell batteries.
3-Station BMS, 230 Volt AC, 50/60 Hz. Does not support Li-ion or 3-cell batteries.
*Compatible with STAR Micronics SP200 series and printers with STAR printer
emulation. STAR Micronics printers available at STAR Micronics distributors.
BATTERY MAINTENANCE SYSTEMPLUS (BMSPLUS) ADAPTERS
ASTRO Digital XTS 5000/3500/3000
WPPN4019AR
WPPN4022AR
WPPN4086AR
Adapter. Compatible with NiCd batteries only.
Adapter. Compatible with both NiCd and NiMH batteries.
Adapter. Compatible with NiCd, NiMH and Li-ion batteries.
WPPN4097BR
ASTRO Digital XTS 2500/1500, MT 1500 and PR1500
NiCd and NiMH Adapter
PMLN5423A
Li-ion Adapter
NDN4005B
BATTERY OPTIMIZING SYSTEM II (BOS II)
No other battery analyzer matches the speed, accuracy, versatility and ease-of-use of the BOS II in
providing powerful analyzing capabilities. Users can select from 12 pre-programmed service programs
making it quick and easy to get up and running. Because the BOS II is programmable, users can create
custom programs to perform a wide variety of tasks specific to individual needs. New enhancements
include new navigation keys and an improved, more intuitive menu system. Regular use of the BOS II
can optimize battery performance and help extend battery life, helping reduce battery replacement costs.
ASTRO Digital XTS 5000/3500/3000
WPLN4124BR
RL-75765
BOS II, 4-Station, 90-264 Volt AC, US Plug. Adapter Plates Required.
BOS II Battery Adapter. For use with ASTRO XTS 5000/3500/3000 radios.
ASTRO Digital XTS 2500/1500, MT 1500 and PR1500
WPLN4124BR
RL76341
PMLN5416B
WPLN4124BR
BOS II, 4-Station, 90-264 Volt AC, US Plug. Adapter Plates Required.
Standard Battery Adapter. For use with XTS 2500 radios.
Tri-Chemistry Adapter (Li-ion, NiCD, NiMH). For use with XTS 2500 radios.
• Quicktest™ diagnostic feature measures a battery’s state of health
in approximately 2 to 5 minutes
• Supports NiCd, NiMH, Li-ion and SLA batteries
• Increased power-programmable from 100 mAh to 4 amps per station
• Programmable adapters allow customization of maintenance routines
• Proprietary reduction cycle restores NiCd and NiMH batteries
• Printer output for reports and labels with computer interface,
includes both 9-pin serial and 25-pin parallel ports
• 100W Universal Power Supply (110-240 VAC) provides up to
4 amps of power per station
• Interchangeable adapter plates accommodate nearly all Motorola
two-way batteries and other major brands
PAGE 15
PORTABLE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
VEHICULAR CHARGERS
RELIABLE
VEHICULAR TRAVEL CHARGER
A great traveling companion that ensures constant communication while on the road. Its
small compact design allows the radio to be used while rapid charging in the charger base.
Unit includes a voltage regulated vehicular charger adapter, custom charger base, mounting
bracket and coil cord.
RLN4884B
RLN5914A
2580600E05
Vehicular Travel Charger
Universal Mounting Bracket for RLN4884B.
Includes screws and nylon strap cord.
T R AV E L C H A R G E R T R A N S F O R M E R S
Transformer, 120 Volt, US
RLN4884B
WPLN4208B
IMPRES COMPATIBLE VEHICULAR CHARGER
The IMPRES compatible vehicular charger has full IMPRES charger to battery communication
capability. This ensures continuity of IMPRES battery charge data logging in a vehicular
environment, so the IMPRES battery will receive adaptive, automatic reconditioning and will
qualify for the 6-month capacity warranty extension. It is important to note that the IMPRES
compatible vehicular charger will not recondition IMPRES batteries due to the operational
demands in a vehicle, but it will provide an indication when the reconditioning is required
in an IMPRES desktop charger.
WPLN4208B
IMPRES Compatible Vehicular Charger
IMPRES Vehicular Charger
This compact
vehicular charger
allows users
to charge the battery
while it’s attached
to the radio
or alone.
PAGE 16
PORTABLE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
VEHICULAR ADAPTERS
VEHICULAR ADAPTERS
Allow users to adapt XTS 5000 portable radio for mobile operation. Providing in-vehicle
rapid and trickle charging for NiCd, NiMH and Li-ion batteries, these units offer quick
radio release, dead battery operation, and are powered by attaching the radio supply
cable to the 12V battery located inside police cars, utility trucks or other vehicles.
Connectors are provided for the vehicle’s external antenna, mobile microphone and
optional amplified loudspeaker HSN1000B–all required to allow operation of the portable
radio in a way that is similar to that of a mobile. Also included is a general interface
connector for additional accessories. A colored LED indicates battery recharge status.
For XTVA operation, a microphone and RF Switch NTN8327A are required.
NTN8560G
Radio sold separately.
ASTRO Digital XTS 5000
NTN8561G
NTN8560G
NTN1607F
NTN1606F
Closed Face with Limited Keypad Access, Mini-UHF Connector
Open Face with Limited Keypad Access, Mini-UHF Connector
Closed Face, BNC Connector
Open Face with Limited Keypad Access, BNC Connector
NTN8941A
NTN8943A
ADAPTER KITS FOR ACCESSORIES
XTVA Data Cable Kit. Required for additional accessories.
XTVA Accessory Adapter Kit. Required for additional accessories.
NTN8940B
6685687A02
NTN8327B
REQUIRED ACCESSORIES FOR VEHICULAR ADAPTERS
Trunnion. Required for operation.
Tool Wrench for RF Switch. Required for operation.
RF Switch. Required for operation.
HMN4069F
PLN7737B
HSN1006A
HLN9330B
GLN7280A
NKN6455A
OPTIONAL ACCESSORIES FOR VEHICULAR ADAPTERS
Standard White Palm Microphone
Hand Held Control Head
External Speaker, Amplified, 6-Watt
Emergency Foot Switch
Emergency Push Button
MTVA PA/Speaker Cable
HMN4069F
HSN1006A
HLN9330B
PAGE 17
PORTABLE RADIO : ACCESSORIES
XTS 5000, XTS 2500, XTS 1500, XTS 3500, XTS 3000, MT 1500, PR1500
ANTENNAS
FLEXIBLE WHIP
Flexible whip antennas have a one-piece finish and steel core for optimal radiation
characteristics. They provide more comfort when radio is worn on the belt.
ASTRO Digital XTS 5000/3500/3000
1
8505241U05
8505241U03
8505241U11
6 inch Flexible Whip Antenna, 403-520 MHz
7 inch Flexible Whip Antenna, 806-870 MHz
7 inch Flexible Whip, Dual Band Antenna, 764-870 MHz
1
1
1
NAE6549AR
8505241U03
8505241U11
1
1
Antenna Characteristics
Heliflex antennas are
engineered for maximum
output and coverage.
ASTRO Digital XTS 2500/1500, MT 1500 and PR1500
Stubby antennas are
non-obtrusive, ideal for
wearing the radio on a belt.
7 inch Flexible Whip Antenna, 380-520 MHz
7 inch Flexible Whip Antenna, 806-870 MHz
7 inch Flexible Whip Dual Band Antenna, 764-870 MHz
Whip antennas are one-piece
with a steel core for
optimal radiation.
HELICAL
Helical antennas are sturdy and dependable. Each antenna is designed and built to quality
standards. The skirt at the base of the connector helps to seal out damaging elements.
The connector is made of plated brass material for long life.
ASTRO Digital XTS 5000/3500/3000
1
8505644V01
8505644V02
8505644V03
8505644V04
8505644V05
8505644V06
7.5 inch Helical Antenna, 136-151 MHz
7 inch Helical Antenna, 151-162 MHz
6.5 inch Helical Antenna, 162-174 MHz
3.5 inch Helical Antenna, 403-435 MHz
3 inch Helical Antenna, 435-470 MHz
3 inch Helical Antenna, 470-520 MHz
1
1
1
1
1
ASTRO Digital XTS 2500/1500, MT 1500 and PR1500
1
8505644V01
8505644V02
8505644V03
NAE6546AR
NAE6547AR
NAE6548AR
7.5 inch Helical Antenna, 136-151 MHz
7 inch Helical Antenna, 151-162 MHz
6.5 inch Helical Antenna, 162-174 MHz
3 inch Helical Antenna, 403-435 MHz
3 inch Helical Antenna, 435-470 MHz
3 inch Helical Antenna, 470-520 MHz
1
1
1
1
1
8505241U05
8505644V01
8505644V03
8505644V04
8505241U06
WIDEBAND
Wideband antennas are ideal when the radio is used in different frequencies
since one antenna will cover all ranges.
ASTRO Digital XTS 5000/3500/3000
1
8505518V01
8 inch Wideband Antenna, 136-174 MHz
STUBBY
This quarterwave stubby antenna is ideal when the radio is worn on a belt because the
short antenna is non-obtrusive. This broad band antenna can be used for both 800 and
900 MHz applications.
8505241U06
1
4 inch Stubby Antenna, 806-941 MHz
DIPOLE
Dipole antennas are injection molded in lasting polyurethane. The wide skirt at the bottom of
the connector protects against damaging environmental elements. The dipole antenna is ideal
when strong and solid signal clarity is demanded.
NAF5039A
ASTRO Digital XTS 2500/1500, MT 1500 and PR1500
8 inch Dipole Antenna 806-870 MHz
1
Intrinsically Safe: Motorola approved accessories are a critical part of the specific radio and accessory system
certified by a recognized testing organization as intrinsically safe. Non-Motorola approved accessories are not
certified as part of the overall Motorola portable radio system. Use of non-Motorola approved accessories
could result in equipment that is unapproved or unsafe in a hazardous environment.
1
PAGE 18
MOBILE RADIO : ACCESSORIES
XTL 5000–ASTRO CONTROL HEADS, XTL 1500/2500/5000 O5 CONTROL HEADS, AND PM1500
MOBILE MICROPHONES
CLARITY
HMN1079B
HMN1080A
HMN4079D
HMN1090B
MOBILE MICROPHONES AND ACCESSORIES
XTL 5000–ASTRO Control Heads
HMN1081A
HMN1079B
HMN1080A
Palm Microphone. For use with W9 Control Head.
Water-Resistant Motorcycle Palm Microphone
Standard Palm Microphone
ASTRO XTL 1500/2500/5000 05 Control Heads, PM1500
HMN4079E
HMN1090B
HMN4089A
HMN1089B
HMN4097A
HKN1018A
HLN1457A
Keypad Microphone
Standard Palm Microphone
Visor Microphone, Remote Mount
Water Resistant Palm Microphone
Telephone Style Handset with Keypad and Hang-up Cup
Hang-up Handset with Normal Armored Cable (Old-style)
Handset with Hang-up Cup (Old-style)
PAGE 19
MOBILE RADIO : ACCESSORIES
XTL 5000–ASTRO CONTROL HEADS, XTL 1500/2500/5000 O5 CONTROL HEADS, AND PM1500
SPEAKERS AND CONTROL STATION ACCESSORIES
SPEAKERS FOR SIREN AND PUBLIC ADDRESS KITS
XTL 5000–ASTRO Control Heads
TDN6251A
Siren Speaker. Round with Chrome Finish
TDN6252A
Siren Speaker. Rectangular with White Finish
TDN6253A
Siren Speaker. Under hood with Gray Finish
TDN6254A
Siren Speaker. Round with Gray Finish
TDN6253A
SIRENS/DIRECT ENTRY KEYPAD (DEK)
XTL 5000–ASTRO Control Heads
H1336B
Siren/Public Address Kit with Direct Entry Keypad
H1500B
Siren with Public Address Kit (does not include Direct Entry Keypad)
H1338A
Status/Message Direct Entry Keypad
Includes 8 buttons, only applicable for Systems 3.X and Earlier.
TDN6254A
EXTERNAL SPEAKER
Provides audio for high ambient noise environments.
HSN4018C
XTL 5000–ASTRO Control Heads
Water Resistant Motorcycle Speaker (13W rated audio)
HSN4038A
HSN4032B
ASTRO XTL 1500/2500/5000 05 Control Heads, PM1500
Water Resistant Speaker (7.5W rated audio), Remote Mount
Non Water-resistant Speaker (13W rated audio)
CONTROL STATION ACCESSORIES
XTL 5000–ASTRO Control Heads
RMN5083A
Desktop Microphone
HPN4007C
Control Station Power Supply (110V, 15 amps 25-60W rated)
3060665A04
110V Line Cord
HLN6042A
Desktop Tray with Speaker
RMN5070A
HLN6042A
HLN6925A
HPN4007C
RMN5070A
PAGE 20
HSN4018C
ASTRO XTL 1500/2500/5000 05 Control Heads, PM1500
Desktop Microphone
Desktop Tray with Speaker
Control Station Mount
Control Station Power Supply, (110V, 15 amps 25-60W rated)
HPN4007C
HSN4038A
MOBILE RADIO : ACCESSORIES
XTL 5000–ASTRO CONTROL HEADS, XTL 1500/2500/5000 O5 CONTROL HEADS, AND PM1500
SWITCHES, CABLES AND TRUNNIONS
EMERGENCY SWITCHES
Enables user to send emergency messages to desktop consoles where
signalling unit ID number is displayed, and alarm is sounded.
HLN5113B
XTL 5000–ASTRO Control Heads
Emergency Foot Switch
HLN5113B
HLN5131C
GLN7278B
ASTRO XTL 1500/2500/5000 05 Control Heads, PM1500
Emergency Foot Switch
Emergency Push Button
Foot Switch Push-to-Talk
HLN5131C
GLN7278B
HLN6372A
HLN6025A
KEY LOCK MOUNTS
XTL 5000–ASTRO Control Heads
HLN6025A
Key Lock Mount
HLN6372A
ASTRO XTL 1500/2500/5000 05 Control Heads, PM1500
Key Lock Mount
ADAPTER CABLES
Allows mobile radio users to convert existing ASTRO Digital SPECTRA and
ASTRO Digital SPECTRA Plus accessory cables for use with the XTL 5000
(ASTRO Control Heads).
HKN6158A
HKN6159A
HKN4191B
HKN4192B
XTL 5000–ASTRO Control Heads
Audio Cable Adapter
Adapter Cable Data Power Cables
10-Foot Mid Power Cable for dash mount installations
20-Foot Mid Power Cable for remote mount installations
EXTENSION CABLES
Allows user to extend microphone cord length. Compatible with HMN1089A
and HMN1090A only.
PMKN4033A
PMKN4034A
ASTRO XTL 1500/2500/5000 05, PM1500
Microphone Extension Cable–10 Foot
Microphone Extension Cable–20 Foot
REMOTE MOUNT CABLES
Enable users to separate the mobile control head from the transceiver. This is
beneficial when there is limited space in the dash or console for the mobile.
YKN4261A
YKN4246A
YKN4248A
YKN4249A
YKN4256A
XTL 5000–ASTRO Control Heads
10-Foot Remote Mount Cable
30-Foot Remote Mount Cable
50-Foot Remote Mount Cable
75-Foot Remote Mount Cable
150-Foot Remote Mount Cable
HKN6164A
HKN6165A
HKN6166A
HKN6167B
HKN6168B
HKN6169B
HKN6170A
ASTRO XTL 1500/2500/5000 05 Control Heads, PM1500
131-Foot Remote Mount Cable
115-Foot Remote Mount Cable
75-Foot Remote Mount Cable
50-Foot Remote Mount Cable
30-Foot Remote Mount Cable
17-Foot Remote Mount Cable
10-Foot Remote Mount Cable
POWER CABLES
HKN4191B
HKN4192B
HKN6032A
HKN6110B
ASTRO XTL 1500/2500/5000 05 Control Heads, PM1500
10-Foot Mid Power Cable for dash mount installations
20-Foot Mid Power Cable for remote mount installations
Motorcycle Power Cable
100-Watt Power Cable
MISCELLANEOUS CABLES
ASTRO XTL 1500/2500/5000 05 Control Heads, PM1500
GKN6271A
Ignition Sense Cable
HKN6182A
Keyloader Adapter for mobile microphone port (MMP),
1.5 inch cable
REMOTE MOUNT KITS
XTL 5000–ASTRO Control Heads
H1803A
Remote to Dash Mounting Kit
H1804A
Dash to Remote Mounting Kit
HKN6161A
20-Foot RS232 Cable for Rear Accessory Port,
remote mount installations
HKN6160A
6-Foot RS232 Cable for Rear Accessory Port,
dash mount installations
TRUNNION KITS
HKN6186B
HLN6909A
HLN6861C
ASTRO XTL 1500/2500/5000 05 Control Heads, PM1500
Control Head Remote Mount Trunnion Kit
High Power Trunnion Kit (Quick Release with Lock)
Mid Power Trunnion Kit (Standard Bracket Installation)
HLN6909A
PAGE 21
MOBILE RADIO : ACCESSORIES
XTL 5000–ASTRO CONTROL HEADS, XTL 1500/2500/5000 O5 CONTROL HEADS, AND PM1500
LAIRD TECHNOLOGIES ANTENNAS
Laird Technologies designs and manufactures antennas to exacting electrical and mechanical
specifications for critical applications in Defense, Public Safety, Transportation, Satellite, and
Medical communications. These top quality mobile, portable and base antenna products utilize
the latest patented technologies, lean manufacturing techniques, custom automation and
vertical integration. These antennas are commonly used with wireless voice and data, asset
tracking and two-way radios; they are widely employed throughout the security, military,
public safety and other mission critical industries. Many of the Laird patented technologies
offer solutions unavailable from other antenna manufacturers.
PHANTOM ELITE®
This exclusive low-profile, stealth antenna with Patented Field Diversity™
technology etched on a circuit board is for use with VHF, UHF, Dual Band and 2.4
GHz applications. Includes antenna only and attaches to the standard NMO 3⁄4 inch
mount–sold separately.
RDD5423A
RDD5424A
RDE5797A
RDE5798A
RDF5723A
RDF5724A
150-155 MHz Unity Gain Phantom Elite, White
150-155 MHz Unity Gain Phantom Elite, Black
450-470 MHz 3dB Phantom Elite, White
450-470 MHz 3dB Phantom Elite, Black
806-866 MHz 3dB Phantom Elite, White
806-866 MHz 3dB Phantom Elite, Black
PHANTOM®
Phantom true field diversity design ensures uninterrupted video and data
transmissions in urban canyons and rural drop off areas 3dB MEG gain outperforms
a 3dB whip in many applications. For mobile and fixed applications with NMO or
permanent N female mount–sold separately.
RDG4479A
RDG4480A
RAD4209A
RAD4210A
RAD4207A
RAE4167A
RAE4168A
RDE5514A
RAF4220A
RAF4217A
PAGE 22
RDE5798A
Dual Band Antennas
821-869/1850-1990 MHz 3dB Dual Band Phantom, White
821-869/1850-1990 MHz 3dB Dual Band Phantom, Black
Single-Band Antennas
142-160 MHz Tunable Phantom NMO mtg 60W, Black
142-160 MHz Tunable Phantom NMO mtg 60W, White
150-168 MHz Tunable Phantom NMO mtg 60W, White
450-470 MHz 3dB Phantom NMO 3⁄4 Mount, White
450-470 MHz 3dB Phantom NMO 3⁄4 Mount, Black
450-470 MHz 3dB Phantom with 5⁄8 stud
permanent mount N female, White
806-866 MHz 3dB Phantom NMO 3⁄4 Mount, White
821-896 MHz 3dB Phantom NMO 3⁄4 Mount, White
RAE4167A
RDE5514A
MOBILE RADIO : ACCESSORIES
XTL 5000–ASTRO CONTROL HEADS, XTL 1500/2500/5000 O5 CONTROL HEADS, AND PM1500
LAIRD TECHNOLOGIES ANTENNAS
A-BASE
Gold-plated push-pin contact provides the most corrosion resistance and power transfer
over time. Longer tuning ferrule allows for greater freedom in frequency adjustment without
trimming. Includes antenna only and attaches to the standard NMO 3⁄4 inch mount–
sold separately.
RDD5410A
RDD5408A
RDF5433A
RDD5553A
150-174 MHz 1⁄4 Wave Chrome Center Tunable A-Base Whip
150-174 MHz 1⁄4 Wave Chrome Center Tunable A-Base Whip with Spring
806-896 MHz 3dB Chrome Open Collinear A-Base
118-896 MHz 1⁄4 Wave Chrome Tunable A-Base
QUARTERWAVE ANTENNAS
Quarterwaves are built with gold plated contacts for corrosion resistance and best power
transfer. Stand upTM grommet will not degrade over time. High spring temper rod stays straighter
longer. Stainless steel corona ball stays on the rod without dissimilar metal interaction. Includes
antenna only and attaches to the standard NMO 3⁄4 inch mount–sold separately.
RAD4229A
RDD5227A
RDD5228A
RDE5485A
RDE5486A
RDF5436A
RDF5439A
RDF5437A
RDF5438A
RDF5617A
RDF5657A
162-174 MHz 1⁄4 Wave Stainless Antenna
152-162 MHz 1⁄4 Wave Stainless Antenna
152-162 MHz 1⁄4 Wave Black Antenna
450-470 MHZ 1⁄4 Wave Stainless Antenna
450-470 MHz 1⁄4 Wave Black Antenna
806-896 MHz 1⁄4 Wave Stainless Antenna
806-866 MHz 3dB Stainless Open Coil Flexible Antenna
806-896 MHz 1⁄4 Wave Black Antenna
806-866 MHz 3dB Black Open Coil Flexible Antenna
118-970 MHz 1⁄4 Wave Stainless Field Tunable Antenna
118-970 MHz 1⁄4 Wave Black Field Tunable Antenna
MOBILE LOAD COIL
Low loss coil form adds dimensional and frequency stability. ABS material is
injection molded around solid brass inserts to create a housing that is virtually
leak proof. All silver solder joints ensure electrically and mechanically secure
connections. All NMO mountable. Includes antenna and attaches to the
standard NMO 3⁄4 inch mount–sold separately.
RDD5229A
RDD5230A
RDD5413A
RDD5231A
RDD5414A
RDE5487A
RDE5488A
RDE5785A
RDF5440A
RDB4499A
132-525 MHz VHF Broadband 1⁄4 Wave with spring
144-174 MHz 1⁄2 Wave No ground Plane 2.4dB
144-174 MHz 1⁄2 Wave No ground Plane 2.4dB with spring
144-174 MHz 3dB Base Loaded 5⁄8 Wave
144-174 MHz 3dB Base Loaded 5⁄8 Wave with spring
450-470 MHz 3dB Base Loaded 5⁄8 Wave
450-470 MHz 5dB 5⁄8 Wave Closed Collinear
450-470 MHz 5dB Closed Collinear with spring
806-866 MHz 3dB Base Loaded 5⁄8 Wave
42-48 MHz Base Loaded Wideband
RDD5414A
RDD5231A
PAGE 23
MOBILE RADIO : ACCESSORIES
XTL 5000–ASTRO CONTROL HEADS, XTL 1500/2500/5000 O5 CONTROL HEADS, AND PM1500
LAIRD TECHNOLOGIES ANTENNAS
Laird Technologies land mobile radio antennas are the industry standard for public safety
agencies, fleet and transportation networks. From 27 MHz to 5.8 GHz, Laird Technologies
designs and manufactures a wide variety of mobile antennas with a multitude of mounting
options. Multiple cable options, connectors, mounts and bracket products provide a complete
antenna system.
MOBILE MOUNTING EQUIPMENT
All brass construction and gold plated contact design ensure the most corrosion resistance and best
power transfer available. Silver soldered ground lug and contact virtually eliminate RF noise or static.
RRDN4927A
3080384M48
RRDN5461A
RRDN5628A
RRDN6063A
RRDN6945A
RRDN6946A
RRDN6798A
RRDN6847A
RRDN6848A
RRDN6849A
RRDN7132A
RAN4049A
RAN4052A
⁄4 inch Hole brass NMO Mount with 17’ RG58A/U cable, no connector
⁄4 inch Hole brass NMO Mount with 17’ RG58U cable, mini-UHF connector (not attached)
3
⁄4 inch Hole brass NMO Mount with 17’ RG58A/U cable, mini-UHF connector (not attached)
3
⁄4 inch Hole brass NMO Mount with 17’ Teflex–no connector
3
⁄4 inch Hole brass NMO Mount with 17’ RG58A/U cable, PL259 connector (not attached)
3
⁄4 inch Hole brass NMO Mount with 17’ RG58U cable, PL259 connector (not attached)
3
⁄4 inch Hole brass NMO Mount with 17’ RG58U cable, no connector
3
⁄4 inch or 3⁄8 inch Hole (up to 1⁄2 inch thick) plate mount with 17’ RG58A/U cable, no connector
Mobile-to-Base converter for VHF and UHF, N terminated
Quarterwave Chrome Rain Cap for NMO Mount
Quarterwave Black Rain Cap for NMO Mount
Chrome Quarterwave Nut
3
⁄4 inch Hole Mount O-ring 6-pack
3
⁄4 inch Hole Brass Mount. For use with RG58 size cable (not included) no connector
3
3
RRDN6798A
PAGE 24
MOBILE RADIO : ACCESSORIES
XTL 5000–ASTRO CONTROL HEADS, XTL 1500/2500/5000 O5 CONTROL HEADS, AND PM1500
ANTENNAS
THROUGH-HOLE MOUNT ANTENNAS
HAD4006A
HAD4007A
HAD4008A
HAD4009A
HAD4017A
HAD4022A
VHF ANTENNAS
136-144 MHz 1⁄4 Wave
144-150.8 MHz 1⁄4 Wave
150.8-162 MHz 1⁄4 Wave
162-174 MHz 1⁄4 Wave
146-174 MHz 1⁄4 Wave
136-174 MHz 3.0dB Gain
HAE6012A
HAE4003A
HAE6010A
HAE4012A
HAE4011A
HAE6011A
RAE4014ARB
HAE6013A
HAE4004A
HAE4013A
RAE4016ARB
UHF ANTENNAS
380-433 MHz 1⁄4 Wave
450-470 MHz 1⁄4 Wave
380-433 MHz 3.5dB Gain
470-495 MHz 3.5dB Gain
450-470 MHz 3.5dB Gain
380-433 MHz 5.0dB Gain
450-470 MHz 5.0dB Gain
380-470 MHz Wideband 2.0dB
470-512 MHz 1⁄4 Wave
494-512 MHZ 3.5dB Gain
494-512 MHz 5.0dB Gain
HAF4013A
HAF4014A
HAF4016A
HAF4017A
HAF4015A
HAF4018A
700-800 MHz ANTENNAS
762-870 MHz 3dB Gain Low Profile
762-870 MHz 3dB Gain Elevated Feed
762-870 MHz 1⁄4 Wave Through-hole Mount
762-870 MHz 3dB Gain Collinear
Through-hole Mount
762-870 MHz 3dB Gain Motorcycle
762-870 MHz Low Profile Motorcycle
Mobile Antennas
A communication system is only as good as the
mobile antenna used to transmit and receive—
so whenever lives are on the line Motorola
Original accessories should be the
go-to choice.
HAE4013
HAE4003
HAD4006
PAGE 25
STREAMLINED
SOLUTIONS FOR
A SINGLE RADIO
OR ENTIRE FLEET
Every Motorola two-way radio can be customized to suit your current and future communication
needs. All Motorola Original accessories are built to the highest standards of quality, and are
specially engineered to perfectly complement your radio’s performance. So don’t wait any longer
to increase your productivity with optimum two-way radio performance.
Contact us today to enhance your two-way radio capabilities
with high-performance Motorola Original accessories.
For more information on our two-way radios and accessories,
please visit us on the web at: www.motorolasolutions.com
or access our global contact directory at:
www.motorolasolutions.com/enterprisemobility/contactus
MOTOROLA, MOTO, Motorola Solutions and the Stylized M Logo are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.
© 2011 Motorola Solutions, Inc. All rights reserved. Specifications subject to change without notice.
Motorola Solutions, Inc.
1301 East Algonquin Road
Schaumburg, IL 60196
www.motorolasolutions.com
R3-9-2011A