Rose electronics UL-V3 Specifications

Saflok Quantum™
Quantum™ sectional trim lock, with
its minimal physical impact on design
aesthetics, provides “worry-free” performance. This sectional trim design
is available in two configurations: the
Quantum MT™ (insertion card reader)
and the Quantum RFID (radio frequency identification) locks. SAFLOK’s
robust ANSI Grade 1 mortise set (an
integral feature in SAFLOK MT™ and
Odyssey™) is combined with sophisticated technology to provide reliable
security while offering minimalist
design.
132
Features & benefits
Quantum™ MT™ lock
Quantum™ RFID lock
Quantum™ MT™
· Features robust ANSI Grade 1 mortise
· Multi-technology enabled reading
smart, magstripe and memory key
cards
· Wide range of handle styles and
finishes for choice
· Stores up to 5,900 events
· Ease to up-grade to on-line system
· Automatic dead bolt
· Door ajar sensing mortise (optional)
Quantum MT provides all the conveniences and capabilities of the SAFLOK
multi-technology lock series reading
smart, memory and magstripe keycards.
Quantum™ RFID lock is designed to answer the need when design and beauty
are as equally important as technology
and functionality. Using the latest in
radio frequency technology, Quantum™
RFID and keycard communication is conducted via RF waves. With Quantum™
RFID, simply hold the keycard over the
reader to cycle the lock.
Quantum™ RFID
· Features robust ANSI Grade 1 mortise
· Features contactless smart card
technology
· Environmentally sealed proximity
reader protects against climate
extremes
· Open IR/RF architecture
· Ease to up-grade to on-line system
· Automatic dead bolt
· Door ajar sensing mortise (optional)
Quantum™ MT™ features and benefits
include:
· Custom ASIC circuit assembly
· Indicator lights integrated in card slot
· Stores up to 5,900 events
· 1” slim and discrete bezel
· Automatic dead bolt (ADB™)
· Open IR/RF architecture
· Energy management interface (optional)
· Lock audit/interrogation via smart card
For magstripe, memory, and smart keycards, SAFLOK recommends using the
insertion and/or motorized encoders.
Quantum RFID features and benefits
include:
· Environmentally sealed reader protects
against climate extremes
· LED lights displayed behind polycarbonate lens
· Energy management interface (optional)
· Open IR/RF architecture
· Contactless reader uses ISO communication platform
· Keycards are programmed using a “contactless” encoder
· Automatic dead bolt (ADB)
Saflok Quantum™
Optional Communication Technology
Safe and Secure with SAFLOK
SAFLOK’s optional communication technology (available only with the System
6000 front desk operating system)
enables the Quantum lock to become
part of a centralized access control and
communication system including interfacing with the Messenger wireless lock
access network and the Inncom energy
management system.
SAFLOK technical experts are available 24 hours a day, seven days a week
for support. A worldwide leader in
the development and manufacture of
electronic lock systems, SAFLOK will
help you achieve the highest levels of
security, efficiency, and flexibility in your
daily operations. The premier provider
of stateof-the-art security programs for
more than 25 years, SAFLOK has earned
a stellar reputation for continuous quality improvement.
133
Specifications
Lock specifications may change without notice.
· ANSI Grade 1 mortise lock available in
standard function, 1” (25 mm) throw
dead bolt, and 3/4” (19 mm) throw
dead-locking latch bolt
· 2-3/4” from door edge to lever (back
set)
· Operates on standard AA alkaline
battery pack
· Door thickness range: 1-3/4” – 2-1/8” for
standard product
· Available with or without ADB mortise
lock
Options
· “Door ajar” sensing mortise
· Custom designs available for thicker
doors
· Inside escutcheon:
10-1/4” (260 mm) x 3-1/2” (89 mm)
Certification
· Certified by Underwriters Laboratories
(UL) for doors up to a three-hour rating
Note
Quantum employs the electrified mortise certified to:
· ANSI 156.13-2002 American National
Standard for mortise locks and latches.
Grade 1 level for both security and
operational requirements
· ANSI 156.25-2002 American National
Standard for electrified locking devices
When ordering, please specify
· Total number of lock sets and spares
· Desired finish
· Door thickness and composition (wood
or metal)
· Door preparation – consult SAFLOK for
template
· Door frame composition – wood or
metal frame and strike plate measurements
Saflok Odyssey™
With Odyssey™, SAFLOK has blended
distinctive elegance and superior
locking system
from the room.
Odyssey’s battery pack is solid soldered
and insulated to ensure uninterrupted
power. If the battery power is running
Advanced Engineering
low, an automatic alert is activated via a
Odyssey’s custom circuit assembly inred light that is displayed with inserticludes an Intel processor, real-time clock, on of the keycard. This signal is given
diagnostic circuitry, and software. All
months before the battery needs to be
components are embedded in silicone to replaced. If Messenger is employed, a
prevent moisture intrusion.
low battery message is displayed on the
computer screen months in advance.
The FLASH memory stores more than
The programming and audit function
a year’s worth of lock data—as many
remain intact during change-out.
as 5,900 entries. It provides audit
information such as time and date of
Passage Mode
entry, as well as the ID code of the
Compatible with access management
employee or guest using the keycard.
systems that use magnetic stripe,
Odyssey records entry into and egress
smart card or memory card technology,
134
Features & benefits
· Features robust ANSI Grade 1 mortise
· Multi-technology enabled reading
smart, magstripe and memory key
cards
· Wide range of handle styles and
finishes for choice
· LED lights embedded in card reader
· Records entry into an egress from
the room
· Stores up to 5,900 events
· Ease to up-grade to on-line system
· Automatic dead bolt (optional)
· Door ajar sensing mortise
Odyssey can be programmed to lock and
unlock at targeted times allowing unrestricted entry during “passage” hours.
Otherwise, the lock engages. This feature makes Odyssey ideal for perimeter,
meeting room, and amenity area doors.
Flawless Finishes
Odyssey is available in seven durable,
flawless finishes: satin chromium; satin
or bright brass; polished, satin or pearl
nickel; and oil-rubbed bronze. All of
these finishes come with a variety of
matching lever finishes and complementary lever designs. To maintain the original luster and color, most of Odyssey’s
finishes contain EHC™ — Environmentally Hardened Coating— that provides
exceptional resistance to corrosion and
abrasion. Perennially, Odyssey will maintain its original luster and color.
Odyssey’s sleek design, curved edges,
and flawless finishes complement the
changing architectural and design demands of the luxury hospitality market.
SAFLOK also replaced the LED access
indicator lights of its previous lock models with an illuminated keycard slot to
reinforce its clean, sophisticated façade.
Optional Automatic Dead Bolt (ADB™)
The SAFLOK automatic dead bolt has a
two-point locking system. The 3/4” dead
locking latch and 1” steel reinforced dead
bolt engage with every door closing.
Optional Communication Technology
SAFLOK’s optional communication
technology (available only with the System 6000 front desk operating system)
enables the Odyssey lock to become
part of a centralized access control and
communication system including interfacing with the Messenger wireless lock
access network and the Inncom energy
management system.
Safe and Secure with SAFLOK
SAFLOK technical experts are available 24 hours a day, seven days a week
for support. A worldwide leader in
the development and manufacture of
electronic lock systems, SAFLOK will
Saflok Odyssey™
1 Automatic
Dead Bolt (ADB™)
Battery Pack
Dead Latch
Silicone
Flash Circuitry
135
help you achieve the highest levels of
security, efficiency, and flexibility in your
daily operations. The premier provider
of stateof-the-art security programs for
more than 25 years, SAFLOK has earned
a stellar reputation for continuous quality improvement.
Specifications
Options
· Custom designs available for thicker
doors
· Escutcheon: 10-1/4” (260 mm) x 3-1/2”
(89 mm)
· Armored front: 8” (203 mm) x 1-1/4” (32
mm) or 8” (203 mm) x 1-1/16” (27 mm)
· Compatible with Messenger wireless
lock access network
Odyssey is designed to accommodate an ASA
4-7/8” (125 mm) strike plate. Lock specifications
may change without notice.
Certification
· Mortise lock available in standard
function, ADB function with 1” (25 mm)
throw dead bolt, and 3/4” (19 mm) dead
locking latch bolt
· 2-3/4” backset
· Operates on standard AA alkaline
battery pack
· Door thickness range 1-3/4” – 2-1/8” for
standard product
· “Door ajar” sensing mortise
· ANSI 156.13-2002 American National
Standard for mortise locks and latches.
Grade one level for both security and
operational requirements
· ANSI 156.25-2002 American National
Standard for electrified locking devices
· Certified by Underwriters Laboratories
(UL) for use on fire doors up to 3-hour
rating
· Accessibility Code (ADA) A117.1 for all
levers
When ordering, please specify
· Total number of lock sets and spares
· Desired finish
· Door thickness and composition (wood
or metal)
· Door preparation – consult SAFLOK for
template
· Door frame composition – wood or
metal frame and strike plate measurements
Saflok MT™
The SAFLOK MT is a multi-technology
locking system that provides properties around the world with added levels
of security and greater efficiency.
Inside the MT
At the heart of SAFLOK MT™ is the
custom circuit assembly. This application specific integrated circuit (ASIC)
includes an Intel processor, real-time
clock, diagnostic circuitry, and software
all embedded in silicone to protect it
from moisture and ensure long-lasting
functionality.
The non-volatile FLASH circuitry stores
over a year’s worth of lock data (or up to
5,900 entries)
providing detailed audit-trail information
such as date and time of the entry as
well as the ID code of the employee or
guest using the keycard.
The MT Lock is easy to use and works
with the Windows-based System 6000™
and DeskLinc™ front desk systems.
The MT lock’s battery pack is welded
and insulated to ensure uninterrupted
power. If the battery power is running
low, it will alert you months in advance
by displaying a red light when a keycard
is inserted. This gives you ample time to
replace the battery. During the changeout, the programming and audit trail
information remain intact.
136
Features & benefits
· Features robust ANSI Grade 1 mortise
· Multi-technology enabled reading
smart, magstripe and memory key
cards
· Wide range of handle styles and
finishes for choice
· Stores up to 5,900 events
· Automatic dead bolt (optional)
· Ease to up-grade to on-line system
Another benefit of the MT lock is that
it is easy to upgrade without changing
or removing hardware. New software
features can be easily uploaded when
desired upgrades become available.
Automatic and keycard- activated latch
The MT lock can be programmed to lock
and unlock at certain times of the day,
allowing entry during “passage” hours
and relocking during secure hours. This
feature makes the MT lock ideal for
perimeter, meeting room, and amenity
area doors.
Optional Automatic Dead Bolt (ADB™)
The SAFLOK automatic dead bolt features a two-point locking system. The
3/4” deadlocking latch and 1” steel-reinforced dead bolt activate every time
the door is closed providing increased
protection against forced entry.
Optional Communication Technology
SAFLOK’s optional communication technology (available only with the System
6000 front desk operating system)
enables the MT lock to become part of a
centralized access control and communication system, including interfacing
with Messenger™ bi-directional wireless
communication system and the INNCOM
energy management system.
Safe and Secure with SAFLOK
SAFLOK understands the critical needs
of today’s property managers. When you
partner with SAFLOK, you receive direct
service from initial sales to aftermarket
support — no middleman. Our technical
experts are available 24 hours a day,
seven days a week, to give you the
support you need when you need it.
Saflok MT™
Automatic deadbolt
Battery pack
1 deadbolt
Dead latch
Silicone
FLASH memory
ASIC
137
Specifications
All SAFLOK MTs are prepared to accept standard
ASA 4-7/8” (125 mm) strike plate. Lock specifications may change without notice.
· Mortise lock available in standard function, ADB function, or mechanical key
override with 1” (25 mm) throw dead
bolt and 3/4” (19 mm) dead-locking
latch bolt
· 2-3/4” from door edge to lever (backset)
· Operates on standard AA alkaline battery pack
· Door thickness range 1-3/4”– 2-1/8” for
standard product
Options:
· Spacer plate available for retrofitting
1-3/8” thick doors
· Custom designs available for thicker
doors
· Escutcheon: 9-3/4” (248 mm) x 3-1/2”
(89 mm)
· Armored front: 8” (203 mm) x 1-1/4” (32
mm) or 8” (203 mm) x 1-1/16” (27 mm)
Certification:
· Certified by BHMA to be in compliance
with ANSI 156.13-2002 American
National Standard for mortise locks and
latches. Grade 1 level for both security
and operational requirements
· Certified by BHMA to be in compliance
with ANSI 156.25-2005 American National Standard for electrified locking
devices
· Certified by Underwriters Laboratories
for use on fire doors up to a three-hour
rating
When ordering specify:
· Total number of locksets and spares
· Desired finish
· Door thickness and composition (wood
or metal)
· Door preparation – consult SAFLOK for
template
· Door frame composition – wood or
metal frame and strike plate measurements
Saflok Confidant MT™
Confidant MT™ is a stylish cylindrical
latch solution. It combines modern design and expert engineering to present
a multifaceted security option that
fits seamlessly into any back-of-house
security blueprint providing upgraded
life safety and property security. It
seamlessly integrates with existing
SAFLOK installations.
Incorporating select features of
SAFLOK’s MT™, Confidant MT is compatible with the Windows-based System
6000™ and the stand-alone DeskLinc™
front desk operating system. As a multitechnology lock, it conveniently reads
all three types of keycard media – smart,
memory, and magstripe cards.
Confidant MT showcases a broad spectrum of features that make it a functional, flexible, and “in-demand” solution.
Easy Installation
Confidant MT makes it easy and economical to upgrade electronic locks throughout the back-of-house. It requires a
standard cylindrical latch prep.
Non-volatile FLASH Memory
As common to SAFLOK multi-technology
locks, Confidant MT employs non-volatile
FLASH memory. It can store in excess of
5,900 entries. FLASH memory becomes especially useful in back-of-house
applications, where employee tracking is
crucial.
138
Features & benefits
· Ideal for upgrading existing
· Mechanical guest room locking systems or for improved back-of-house
controls
· Offers versatility at an affordable
price
· Easily integrates with existing
SAFLOK solutions
Future Upgradability
With the capability of this FLASH
memory, property managers can upload
any new software introduced by SAFLOK
without changing or removing any
hardware.
Custom ASIC Microprocessor
At the heart of Confidant MT is SAFLOK’s
proprietary custom ASIC microprocessor, which uses an Intel processor,
real-time clock, and diagnostic circuitry
and software. This circuitry is siliconeencapsulated to improve resistance to
moisture or other corrosive environmental elements.
Specification
· Compatible with a standard 2-3/4” and
2-3/8” backset
· Lock dimensions –
8” (L) x 2-1/2” (W) x 2-5/8” (Projection)
· Door thickness ranges from 1-3/8” to
2-1/8” for standard products (other
sizes can be accommodated by special
request)
· Escutcheon – 8” x 2-1/2”
Options
There are two lever options, i.e. Continental and Tubular
Continental is only
available with the 4"
rose plate and escutcheon, in a 26D finish.
Tubular is only availabe with the 3" rose
plate and escutcheon,
in 26D and US4
finishes.
Handles styles & finishes
Handle styles
(Vintage, Gala, Arc, and Apogee levers may not be available in all areas. Check local fire code.
Wide selection of custom levers available upon request. All SAFLOK electronic locks fitted with levers are ADA compliant.)
Vintage
Troy
Mesa**
Gala
Arc
Apogee*
Continental**
Knob
Notes:
*Only available for Odyssey
** Only available levers for Confidant MT
Finishes
(Actual finish color may differ slightly from printed example. Additional custom finishes are available upon request.)
Bright
Stainless
629
Stain
Brass+
606
Stain
Stainless
630
Bright
Brass+
605
Dark
Mahogany
690
Oil-rubbed
613
Satin
Bronze
612
Bright
Chrome+
625
Satin
Chrome+
626
+Champagne/
Satin Nickel
619
Notes:
+ Includes PVD/EHCTM finishes for
Odyssey locks. Not all finishes are
available for all products. Upcharges
may apply
Escuteheon options (additional charges may apply)
Laser-etching, silk-screening, and embossed logos are all customized escutcheon options that SAFLOK offers. Please note that
embossed logos are not available with the Odyssey lock.
SAFLOK MT
escutcheon
with custom
embossed
logo
Quantum MT
underpate
with custom
silk-screened
logo
SAFLOK MT
escutcheon
with custom
laser-etched
logo
Quantum
RFID
underplate
SAFLOK MT
with custom
vintage
escutcheon
139
Saflok System 6000™
Only one solution provides the security of an access audit system, the
ultimate in key management flexibility,
and superior control throughout your
property — SAFLOK’s System 6000™.
This Windows-based system is ready
to interface with your existing property management system (PMS) and is
completely customizable to best suit
your property’s specific needs. Delivering tomorrow’s security solutions
today, System 6000 is compatible with
all current SAFLOK lock models such
as MT™, Confidant MT™, Odyssey™,
and the Quantum™ series.
System requirements
Features & benefits
Keycard Encoders
· Numerous username and password
protection levels available — management, security personnel, front desk
personnel, etc.
· Expedient lost/stolen key cancellation
and replacement
· Keycard programmability customized
to each user’s access authorization
· Integrates with point-of-sale (POS)
and other third-party applications
· Provides detailed system-use reports,
including:
- Key-making transactions
- Key user/group authorizations
- Keys issued reports
SAFLOK offers several models of
encoding equipment to match varying
keycard capabilities. System 6000
supports all SAFLOK models, allowing
properties to share these encoders on
a network using TCP/IP, or connecting
them directly to a PC over a serial or
USB connection.
System 6000 software installs on any
Windows-based PC and does not require
separate client/server software. Simply insert the installation CD-ROM and
follow the prompts.
System 6000 also uses industry standard TCP/IP network protocol, allowing
properties to plug into their existing
Ethernet networks. Additional property
network and equipment requirements
and recommendations can be referenced
on the SAFLOK System 6000 Property
Network Diagram document included
with the Property Installation Kit.
140
· Insertion Encoder:
Offers the sophistication, durability, and
capability of a high-end, smart card encoder at a fraction of the cost and size.
Encodes smart, magnetic stripe, and
memory keycards
· Motorized Smart Card Encoder:
A motorized three-track encoder that
can be used to encode any combination
of smart, magnetic stripe, or memory
keycards
· Motorized Magstripe Encoder:
Similar to the Motorized Smart Card
Encoder, it only encodes magnetic stripe
keycards
· Contactless Smart Card Encoder:
Used in conjunction with Quantum RFID
sectional trim lock, this state-of-the-art
compact contactless smart card reader
and writer supports Mifare (ISO 14443A)
keycards
· Auto-Feed Encoder:
A customized, proprietary system that is
programmed for keycard encoding based
on the property or kiosk manufacturer’s
specification (e.g., for guest self checkin)
Keycard features
SAFLOK’s System 6000 includes the
following standard key groups:
· Limited-use keys
· Fail-safe keys (automatically cancel out
previous keys)
· Backup keys
· Dual-security keys
· Latching/unlatching keys
· Emergency keys
· Guest room, suite, and connector keys
· Staff keys
Saflok System 6000™
Additional System 6000™ features
· Key identification, verification and
interrogation
Identifies key type, user (if possible),
issue/expiration dates, and ID and generates key-use reports (smart / memory
cards only).
With all SAFLOK multi-technology locks,
System 6000 interrogates smart and
memory cards and produces reports
of up to 1,000 of the most recent uses,
detailing the following information:
- Which locks the keycard attempted to open
(successfully or unsuccessfully)
- Why the keycard could not open certain
doors
- Which locks require battery changes
- Which locks have privacy activated
· Point-of-Sale and Tracks I & II:
Write in an ISO/ABA format on Tracks I
& II of a magnetic stripe keycard, so it is
customizable to each property’s specific
needs. Additional applications include:
- Charging at restaurants, stores, spas, vending machines, or private garage facilities
- Time and attendance activities
- Watchdog functions
· Handheld LPI (Lock programmer /
Interrogator):
A portable, one-at-a-time method for
quick, accurate lock programming and
interrogation, as well as keycard dia-
gnostics. Simply connect the LPI Interface Probe on one end of the device to
an interface board that is inserted into
the room lock
· Cancel-a-Key-ID (Individual Key
Control):
Cancels specific keycard(s) without affecting or canceling other keys in use
· Extensive Reporting:
Provides properties with an extensive
reporting feature that may be viewed
onscreen, saved to a file, or printed.
Reports include:
- User and authorization
- Transaction history
- Lock and key interrogation
141
Variable Features
When smart keycards are used, the variable key feature allows key encoding to
access multiple rooms with one key. This
is a valuable feature for assigning a key
to a group chaperone, staff members, or
contractors requiring access to a specific
list of rooms. For added security, the
smart keycard records activity that can
be interrogated and printed.
Unique Features
System 6000 Plus is available as an
upgrade to System 6000. It is flexible
and completely customizable, allowing
properties to implement simple design
changes (e.g., add another lock) quickly
and easily.
· To add a new lock, simply “duplicate a
lock” with the same attributes (pass,
suite, access levels, etc.)
· You can add entirely new locks with
their own master keys, attributes, etc.
· You can change existing locks so that
they accept a new or different key level
· Remote Key Encoding:
Enables keycard coding from a remote
location, facilitating check-in and allowing guests to receive their room keys
prior to arrival.
· Guest Pre-registration:
Creates keycards for large groups of
guests (conventions, weddings, etc.)
weeks ahead of time. Keycards will not
work in locks until designated check-in
time and will not affect any current or
new guest keys until that time
· Language Options:
Runs in English, French, Spanish, Italian,
and Chinese simultaneously. Russian,
Czech, and Arabic options are being
developed
Open IR/RF Architecture
System 6000 works in conjunction with
Messenger™wireless communication
network and other IR- and RF-enabled
devices to facilitate remote communication. These devices provide wireless
communication to and from the lock and
room, to a central computer. This remote
capability streamlines communication to
reduce costs and optimize use of time.
Standard features include:
· Notifies central server when guest
arrives
· Remote interrogation
· Online staff tracking
· Reports all keycard activity on the lock
· Ability to remotely re-key entire property
· Remote lock diagnostics
· Lock reports directly to a designated
central server. Reports include use history, low battery indication, door ajar
indication, etc.
· Provides wireless communication to
and from the lock
· Creates “smart rooms” that:
- Automatically adjust climate control
- Monitor electricity usage
- Maintain high security
Saflok System 6000™
Perimeter Access
To maximize perimeter security, all keycards can be programmed to provide perimeter access only to those employees
and guests with valid keycards. SAFLOK
even has an optional version that works
with exit-device hardware for perimeter
door areas.
· Facility Access and Latch/Unlatch
Capabilities:
Keycards can be programmed to allow
fully customized access to up to 12
specific areas. Areas can be automatically assigned or individually selected
when keycard is encoded. Locks can be
142
- Programmable auto latch/unlatch
feature eliminates need for manual
Dogging
· Configurable for normally closed
circuits (magnet latches) and normally
open circuits (electric strikes)
· Auditable entries/attempts
· Selectable master key access
- Restricts access to guest keys after
check-out date
is a versatile stand-alone card reader
controller that uses Mifare contactless
smart card technology to contact-less
smart card technology to work with
all electrified access control devices
· Elevator Readers:
for perimeter doors, concierge floors,
Readers can be installed in each elevator, common areas, and other secured areas
with electrified hardware. Some features
allowing/prohibiting access on certain
floors. Multi-channel readers allow indivi- include:
dual control of up to 12 different floors
· Environmentally sealed contactless
or groups of floors with one reader.
smart card reader protects against
· Quantum RFID RCU/ECU:
climate extremes
For properties that have installed the
- Optionally equipped with the messenQuantum RFID lock, the Quantum RFID
ger transceiver for centralized access
RCU is recommended for use in pericontrol
meter areas. The Quantum RFID RCU
- USB connectivity to LPI probe
programmed to automatically unlock
and re-lock at specific times, allowing
passage during select times without the
use of a keycard.
Saflok Messenger™
SAFLOK Messenger™ is a bi-directional wireless communication network. It
converts stand-alone, battery-operated
door locks into a communication device
(to and from the lock), to a designated
server to streamline security procedures and maximize staff efficiency. It
is an ideal link for sending and receiving real-time messages. With a broad
range of functionality, Messenger expedites the check-in process, enhances
guest convenience, reduces expenses,
and conserves staff time.
System Set-up
Messenger offers an open-architecture
design to enable unique customization
to each property’s preferences.
· Operates in conjunction with System
6000™ Windows-based operating
system
· Available in both infrared (IR) and radio
frequency communication formats
· Connects to existing hotel infrastructure via Ethernet, Power over Ethernet
(PoE), or wireless LAN
· New RF protocol optimizes lock battery
life
· Locks initiate communication to the
hub upon each keycard use and check
for pending messages in the hub
143
Features and Benefits
As a wireless control system, Messenger
has numerous capabilities and offers the
following benefits:
· Operates from a central location
· Offers ability to view reports and
interrogations from any remote client
terminal
· Enables real-time staff locating, allowing management to monitor staff or
contractors throughout the property
· Fully integrates with a variety of smart
· Messenger gives real-time information
room networks to accommodate energy for added security and smooth operamanagement and other services
tions.
· Remotely performs most of the same
functions as a handheld programmer,
e.g. as interrogation
· Remotely reports “door ajar” messages
· Remotely cancels keys in the event of a
lost master key
· Remotely adds and changes room access
· Provides detailed lock audit information
and diagnostics that can be downloaded onto a central server
Features & Benefits
· Bi-directional wireless communication system to and from the locks to a
designated central server
· Features open IR/RF infrastructure
· Energy management interface
· Remotely monitors access, disables
lost keys, interrogates locks, and
performs diagnostics
Saflok DeskLinc™
DeskLinc™ is the portable front desk
operating system that fits in the palm
of your hand. Using the latest advances in smart card technology, DeskLinc
is uniquely designed to offer small and
mid-size property managers all the
functions and convenience of a largeproperty front desk system, without
the need for bulky computer equipment
and an elaborate set-up.
The DeskLinc system anticipates
property managers’ needs by bringing
information back from the lock by way
of smart card, saving both time and
money.
As a multi-technology system,
DeskLinc is compatible with smart,
magstripe, and memory media.
DeskLinc is the only system on the
market to offer smart/memory card
capability as a standard feature at no
up-charge.
144
· An extended sign-on function that allows users to remain logged in as long
as they do not sign off
Features & benefits
Form and function
· Small & powerful – suitable for small
and mid-size property managers
· Economical
· Compatible with smart, magstrip and
memory media
· Tracking features for manager to
manage the staffs activity
DeskLinc consists of a handheld unit and
an insertion encoder. No computer is
required to operate the system, and this · The ability to create limited-use keys
system easily integrates with existing
with two-time-use within a set time
PMS structures. The insertion encoder is
frame
a multi-station-capable unit. It accurately
and quickly encodes all three types of
· The ability to program lock to automatikeycard media.
cally open and close at specified times
The handheld unit is used to program
information to the keycard. Improved
features and upgrades to the DeskLinc
handheld unit include:
· The ability to download lock diagnostics
at the door
· An enlarged backlit display screen
· A built-in emergency lock power supply
(ELPS) that is now part of the handheld
unit and can be used to open the door
after power is restored
· Employee master keys can be programmed to only work during specified
work hours
· Multi-station communication using
existing network infrastructure
· A selectable pass option that allows
for optional access authorization to
specific areas
In small and mid-size properties where
front desk real estate is at a premium,
DeskLinc provides a compact option
never before offered by other products.
Saflok DeskLinc™
A report of key use in the locks can also
be generated. The report includes the
Tracking staff activity and ensuring more date and time of key use, the locks the
effective building management are just
keycard attempted to open, why the
some of the issues easily addressed by
keycard was not allowed to open certain
DeskLinc. When smart and memory key- doors, and which locks require battery
cards are issued to staff, managers can
changes or had privacy activated. All
track their activities throughout the pro- this information empowers property
perty. Managers can retrieve information
managers to be proactive instead of
on all the locks visited by the employee
reactive.
by interrogating the smart cards at the
DeskLinc unit. They do not have to waste
time independently visiting each lock.
Revolutionary Smart Card Technology
DeskLinc will identify the key, indicate
the user, and when the key expires. Additional information, such as when the key
was first made and its I.D. number, is also
displayed.
145
Specifications
Handheld
Replace a bulky set-up with
DeskLinc that fits in the palm
of your hand.
Height
1.9 (47 mm)
Depth
9.0 (228 mm)
Width
4.6 (117 mm)
Screen
LCD 128 X 64
Power
6V DC, 1A
Keycards Encoded
N/A
Insertion encoder
DeskLinc is capable of providing up to 11
independent key levels such as:
· Guestroom level
· Suite level
· Fail-safe level
· Section level
· Floor level
· Inhibit level
· Latch/Unlatch level
· Limited-use level
· Grand master level
· Electronic lockout level
· Emergency/Security level
Height
4.9 (124 mm)
Depth
3.9 (99 mm)
Width
4 (102 mm)
Screen
N/A
Power
6V DC, 3A
Keycards Encoded
Smart, Magstripe,
Memory
Saflok Encoders™
SAFLOK keycard encoders are a vital
component of all access control systems. An encoder transfers / transmits
access information and commands
from the software to the keycard. Each
system is configured to suit the unique
requirements of a property. We offer
a variety of keycard encoders from
which to choose, ensuring that you
use the right encoder to support your
property’s requirements.
Insertion encoder
Contactless smart card encoder
The insertion encoder offers the sophistication, durability, and capability of a
high-end smart card encoder at a fraction of the cost and size, and it encodes
magstripe, smart, and memory cards.
SAFLOK employs state-of-the art
contactless smart card technology for
contactless keycard encoding. This
compact keycard reader and writer
supports Mifare (ISO 14443A) keycards.
It is designed for fast integration and
connects to a computer via USB port.
The contactless keycard encoder is used
in conjunction with the Quantum™RFID
sectional trim lock.
Features & benefits
Specifications
Specifications
146
· A wide range of choice to fit for different types of key card
Height
4.9
Height
.875
Depth
3.9
Depth
5
Width
4
Width
2.875
Screen
N/A
Screen
N/A
Power
6V DC, 3A
Power
From USB port
Keycards
encoded
Magstripe, smart,
and memory
Keycards
encoded
MiFare 1K, 4K, and
Ultralight
Part #
CE 6100
Part #
73232
Connectivity
USB, serial, or
TCP/IP
Connectivity
USB
Saflok Encoders™
Motorized magstripe encoder
Motorized smart encoder
The three-track motorized magstripe
encoder is multi-connectivity enabled,
allowing it to manually or remotely
encode keycards for check-in. Properties
may share motorized encoders on a
single network using a TCP/IP connection, or connect the encoder directly to
a PC using a serial or USB connection.
For optimum precision, the motorized
magstripe encoder is gear-driven and
uses springloaded rubber transport
wheels, allowing it to adjust to varying
keycard thicknesses.
The motorized smart encoder looks and
operates much like a motorized magstripe encoder and can encode any combination of smart, magstripe, or memory
keycards. Keycards that are not properly
encoded or eycards with detected errors
are ejected from the back of the encoder. This helps to ensure the quality of
the keycard that is encoded.
147
Specifications
Specifications
Height
3.75
Height
3.75
Depth
7.7
Depth
9.9
Width
5.9
Width
5.9
Screen
N/A
Screen
N/A
Power
N/A
Power
N/A
Keycards
encoded
Magstripe
Keycards
encoded
Magstripe and
Smart
Part #
CE 6000
Part #
CE 6010
Connectivity
USB, serial, or
TCP/IP
Connectivity
USB, serial, or
TCP/IP
Saflok Secure Shift™
Increase guest safety, optimize employee management, and improve
productivity in a single device. Secure
Shift™ has been designed using the
most innovative technology to maximize staff keycard control.
SAFLOK understands that effective
employee management can be challenging, especially in large hotels containing many rooms and luxury resorts
with sprawling properties.
Secure Shift presents a detailed
approach to managing employee time,
attendance, and access. As a standard
feature, Secure Shift is multi-technology enabled. It can read/encode smart,
magstripe, and memory cards. Small,
lightweight, and durable, Secure Shift
leaves a minimal footprint making it an
ideal fit for even the busiest spaces. Its
compact design makes it ideal for easy
wall mounting. When strategically installed throughout the property, Secure
Shift controls access to rooms during
specified work shifts.
Monitor Employee Movement
Before beginning their shifts, employees
must insert their keycards into Secure
Shift to obtain authorization. Employee
keycards are inoperable unless authorized by Secure Shift. So not only do
managers have a log of employee attendance, but there is also an added
148
layer of security that prevents absent
or off-duty employees from potentially
misusing their keycard access.
A Secure Shift unit can also be used
in a parking garage in conjunction
with another common area lock. For
example, the Secure Shift unit can be
placed in the employee section of a
parking garage or a gatehouse/guardhouse. Employees could be required to
reauthorize their keycard before they
even enter the hotel building to begin
their shift for the day.
Proactively Respond to Potential
Lock Issues
Hotel managers can program Secure
Shift to retrieve data and various lock
reports using smart and memory cards.
For instance, information such as low
battery warning on the locks is recorded onto the cards enabling managers
to request reports on all locks with low
battery indication. This kind of preventative maintenance immediately increases productivity and saves money.
Addresses Lost-key-related Concerns
Secure Shift helps ease concerns over
lost keys. For example, if an employee’s
timed-out key is found, it would not work
unless reauthorized to work by a Secure
Shift unit. This feature is especially useful in the event of a lost master key, as it
requires validation by a Secure Shift station before it can be used. This guards
against misuse of the master key outside
its intended time frame.
Specifications
Card Type Supported
Magstripe, smart, and
memory keycards
Power Input
5 VDC 1.0A minmum
Connectivity
TCP/IP
Dimensions
Length
Width
Height
Without
Brackets
7-3/4"
4-1/4"
1-13/16"
With
Brackets
9"
5-5/16"
1-15/16"
Saflok Remote Control Unit
SAFLOK’s® remote control unit
(RCU) is a stand-alone electronic
keycard reader designed to work with
a variety of exit device applications.
The reader offers the widest possible
range of security and convenience.
Robust, reliable and durable, the RCU
is compatible with perimeter door exit
devices, entry doors requiring “afterhours” admission, health clubs, spas
and banquet facilities. The RCU is a
MessengerTM- compliant device and
can be easily integrated as part of a
System 6000™design.
Remote control unit (RCU)
When using the RCU to control perimeter security, keycards can be programmed to allow access to select hotel employees and guests with valid keycards.
The units remain locked during specific
time periods and can be put into passage mode to enable all valid personnel
and current residents / guests unrestricted access. As a standard feature, the
RCU is multi-technology enabled.
Measuring 4.05» x 3.05» x 3.01», the
RCU’s reduced size is further enhanced
with LED lights flush-mounted around
the insertion reader slot to indicate
entry or denied access.
149
Small, lightweight and durable, the unit
leaves a minimal footprint making it an
ideal fit for even the most restricted
spaces. Its applications include:
· Parking arms
· Entry doors
· Pool gates
· Meeting rooms
· Fitness centers
· Concierge
Specifications
Features
Voltage: 12-24 AC/DC
Outside Dimensions:
4.05" (w) x 3.05" (h) x 3.01" (l)
Finish: Dark mahogany
· Auditable entries/attempts
· Reads smart, memory and magnetic
stripe keycards
· RCU switch works with electrified
locking devices
· Controls electric strikes and magnetic latches up to 24 volts AC/DC
· Auto latch/unlatch feature eliminates
need for manual dogging
· SPDT 5A@30VDC relay with common, normally open and normally
closed contact
· Messenger-compliant device
· Surface-mounted and flush-mounted
options available
Surface Mount
Flush Mount
Saflok Multi-channel
Elevator Control Unit (MECU)
Property access is not complete
without the flexibility of the SAFLOK
Multi-channel Elevator Control Unit
(MECU). The MECU’s most distinctive
feature is that it enables up to 12 pass
levels, while a standard RCU and ECU
can only be programmed to permit a
single pass level. The MECU card reader can be installed on each elevator
and is connected to a box containing a
processor circuit with up to 12 relays
on it. When a card having one or more
pass levels on it is read, the appropriate relay(s) will switch to allow recognition of the floor buttons that each one
controls. All this translates into gre-
ater access control. Keycards can be
encoded to grant access to only one of
the controlled floors, all the controlled
floors, or any combination in between
the 12 passes.
150
For details, please contact our Technical sales Representetives.
Saflok Keycards
Keycards are essential components
of any electronic locking solution.
SAFLOK offers three types of keycard
media – smart cards, memory cards
and magnetic stripe cards. Keycards
store information and contain commands to communicate with a lock
and “tell” it how to function. Ensuring
that you use the right keycard that
supports your property’s security
requirements adds to the effectiveness
of your system.
SAFLOK is the only electronic locks
provider that offers multi-technology
lock capability as a standard feature.
All SAFLOK standard feature. All
SAFLOK keycards are proprietarily
encrypted to prohibit cloning.
Magnetic strip (magstripe) cards
Magnetic stripe cards contain three data
tracks onto which information can be
magnetically recorded and stored.
151
Memory and smart cards
Memory cards
Smart cards
The use of memory and smart cards
in hotels are popular for the following
reasons:
As its name implies, a memory card is
equipped with a memory chip to store
SAFLOK access records and lock codes.
You may choose from a variety of memory card types.
A smart card is an integrated circuit
chip card with an electronically erasable
memory and a programmable ROM. It
has the ability to store more data than
memory cards. Facilities typically justify
the added cost of smart cards when it
is intended as a one-card solution for
several different applications.
· The keycards store card usage data
that enables employee tracking.
· Lock audit data can be downloaded to
the keycard making it unnecessary to
use a Lock Programmer & Interrogator
(LPI) terminal and probe.
· Lock error messages can also be
tagged onto the memory and smart
cards.
· Variable locks can programmed on the
keycards. The term variable key refers
to the number of different locks/rooms
that can be programmed onto one
keycard.
No. of locks/rooms per keycard
Memory Card
Variable Locks
2Kb
25
8Kb
125
64Kb
1350
Smart Card
Variable Locks
8KB
1100
Size
2Kb
8Kb
64Kb
Card Type
Memory
Memory
Memory
Access Records
24
118
1,014
A common use for smart cards is in student housing facilities where the cards
are used as keycards, an ID card, as well
as an electronic purse.
Size
8Kb
Card Type
Smart
Access Records
900
Saflok Safes
In today’s wired world, people carry a
wide array of expensive electronic
devices, and they want a safe and
secure place to store them when away
from home. SAFLOK has the solution
with a complete line of in-room safes
that combine impeccable construction,
security, and user-friendly operation.
These safes are ideal for hotels, resorts,
apartments, student housing, offices,
and more.
Designed to Match Any Interior Décor
A powder coat finish adds long-lasting
durability, while the smooth, rounded
corners blend with any room décor.
Whatever the style, SAFLOK safes come
standard in silver on black, silver on
silver, or ivory on ivory. Additional color
options are also available at an upcharge.
Solid security and user-friendly operation
SAFLOK safes feature ease of use while
offering secure storage for personal
items.
152
Features & benefits
· High security products
· User-friendly operation
· Designed to match any interior decor
· Programmable Personal Code Entry
Guests choose their own personal fourdigit code to lock/unlock the safe
· Illuminated Keypad
The energy conserving attractively
illuminated keypad brightly lights the
keys for easy readability and enhanced
operation, even in low lit places like
closets. The keypad is lit upon the first
keystroke as the first digit is displayed,
stays illuminated throughout operation,
and quickly resumes the low power dark
state as soon as the command to lock or
open the safe is processed. Bulbs never
need changing because solid state energy efficient LEDs are used to brilliantly
light the soft touch translucent keys
· Audit Trail – Two Options Available
An electronic control unit (ECU) /
handheld unit lets you print the last 100
entries, showing who used the safe and
in which room
· Code Blocking
This additional safety measure guards
against unauthorized use. If three attempts are made to get into the safe
with an improper code, the system will
automatically shut down for 15 minutes
· Battery Override Unit
Allows access to the safe if the guest forgets the pass code or if a battery failure
occurs, so no valuables are ever trapped
inside the safe
· Electronic Master Key (Protected
Master Code) and User Code
The ECU offers a manager code and
20 user codes allowing the property to
unlock the safe and override any code
set by a guest
· One-Touch Battery Audit
Instantly obtain battery conditions by
touching the # key on the digital keypad
· Quick-Access Battery Panel
Batteries are housed in a special slide
panel inside the door for easy access.
There is no need to remove the entire
door cover to get to the batteries
· Handheld Programmer
An easy-to-use handheld unit serves as a
programmer and password-protected
ECU for all safes. It can be used to obtain
an access audit trail and as an emergency unit to unlock the safe, if necessary
Saflok Safes
Optional features
Electronic illuminated keypad is the
standard configuration. The following alternate configurations are also available:
· Mechanical key operation only
Uses the state-of-the-art Medeco key
and cylinder locking system
· Electronic keypad only
Provides guests with digital access for
locking and unlocking the safe. Guests
choose their own personal four-, five-,
or six-digit code, enter it on the keypad,
shut the door, and press the close button
for secure locking
· Electronic keypad with credit card
swipe
Instead of remembering nos. guests may
use a magnetic stripe credit card that
writes to track 2 to lock/unlock the safe
Card swipe
available on classic
keypad only.
· Brass Plaque
A bright brass plaque with your
property’s name can be affixed to the
front of safes. Plaques hold up to ten
characters. Only available with mechanical key override (MKOTM)
· Mounting Pedestal
Available with the S1, S1.5, S2, S2.5, S3,
S3.5, S6, and S6.5 models
· Electronic Keypad with credit card
swipe and mechanical key override
In case of emergency, a master key can
be used to unlock the safe. All electronic
safes come with an electronic override
Pedestal
Height
mm
Weight
kg
Pedestal I
343
1 1/2
Pedestal II
229
1
153
S1.5
S2
S3.5
Specifications
Model
Exterior
mm
HxWxD
Interior
mm
HxWxD
Door Opening
mm
HxWxD
Clear Door Opening
mm
HxW
S1.5
229 x 432 x 352
203 x 427 x 280
180 x 384
180 x 349
S2
S2.5
337 x 324 x 324
311 x 318 x 260
289 x 277
180 x 349
S3
3.5
553 x 380 x 433
524 x 372 x 360
508 x 333
508 x 298
S5
(Wall)
S1.5
(Wall)
419 x 352 x 165
413 x 346 x 95
380 x 310
355 x 277
S1
S1.5
203 x 495 x 394
178 x 483 x 305
158 x 449
158 x 413
Classic
Keypad
with swipe
Oval
Keypad
(no swipe)
S1