Siemens Gigaset SL400 Specifications

SL400 - SL400 A
Gigaset Communications GmbH
Frankenstr. 2a, D-46395 Bocholt
Manufactured by Gigaset Communications GmbH
under trademark license of Siemens AG.
As of 1 Oct. 2011 Gigaset products bearing the
trademark 'Siemens' will exclusively use the trademark 'Gigaset'.
© Gigaset Communications GmbH 2010
All rights reserved. Subject to availability.
www.gigaset.com
GIGASET. INSPIRING CONVERSATION.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / introduction.fm / 28.04.2010
Gigaset SL400/SL400A – your high-quality accessory
Gigaset SL400/SL400A – your high-quality accessory
Congratulations, you are holding the slimmest and smallest Gigaset there has ever been.
This phone sets new standards with its high-quality genuine metal frame and metal keypad,
1.8" TFT colour display and incorporated functions. Your Gigaset can do a lot more than just
make calls:
Bluetooth® and mini USB
Connect your handset to a PC or headset using a mini USB (¢ page 18) or Bluetooth®
(¢ page 66).
Directory for up to 500 vCards – calendar and appointments
Save phone numbers and other data to the directory (¢ page 35). Enter appointments and
birthdays in the calendar and set reminders (¢ page 58).
Large font
Increase readability of call lists and the directory (¢ page 69).
Customise
Assign personal caller display pictures (¢ page 35), view your personal pictures as a screensaver slide show (¢ page 69) or change the colour scheme of the display (¢ page 69).
Choose from a selection of ringtones specially composed for your SL400 or load your own
(¢ page 71).
If you don't (always) want it to ring
Make the most of the silent alert (¢ page 72), the time control for calls (¢ page 71) or
ensure that all calls with a withheld number are not signalled (¢ page 72).
Other practical information
Synchronise the directory of an existing Gigaset handset (¢ page 37), use the quick dial
function (¢ page 37), adapt your Gigaset to suit your handsfree requirements (¢ page 71)
and adjust the brightness of your keypad to suit you (¢ page 70). Skip back five seconds
when listening to answering machine messages to repeat the last section (¢ page 52).
Environment
Gigaset Green Home – Be environmentally aware when using your phone. Details about our
ECO DECT products can be found at www.gigaset.com/customercare.
Further information on your phone can be found at www.gigaset.com/gigasetSL400.
After purchasing your Gigaset phone, please register it at www.gigaset.com/customercare –
this will ensure any questions you may have or warranty services you request are dealt with
even faster!
Version 4, 16.09.2005
Have fun using your new phone!
1
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / overview.fm / 28.04.2010
Brief overview
Brief overview
1
2
3
4
5
17
16
i
Ã
1
2
V
6
07:15
INT 1
05 Apr
7
Calls
8
9
10
Calendar
3
15
14
4
13
5
11
12
12
13
11
6
10
7
9
14
15
16
8
17
Base
Registration/
Paging key
(
page 61)
Version 4, 16.09.2005
¢
2
¢
Display in idle status
Battery charge status (
page 17)
Display keys (
page 4)
Message key (
page 40)
Access to call and message lists;
Flashes: new message or new call
End call key, On/Off key
End call, cancel function, go back one menu
level (press briefly), back to idle status (press
and hold), activate/deactivate handset (press
and hold in idle status)
Hash key
Keypad lock on/off (press and hold in idle status);
toggles between upper/lower case and digits
Mute key (
page 31)
Mute the microphone
Mini USB port (
page 18)
Microphone
Recall key
- Recall
- Insert a dialling pause (press and hold)
Star key
Ringtone on/off (press and hold);
with an open connection: switch between
pulse dialling/tone dialling (press briefly);
text input: open table of special characters
Key 1
Dial answering machine (SL400A only)/network mailbox (press and hold)
Talk key
Flashes: incoming call;
Accept a call; open redial list (press briefly);
start dialling (press and hold)
Handsfree key
Switch between earpiece and handsfree mode
page 20)
Control key (
Signal strength (
page 17)
Green: Eco Mode (
page 57) activated
Answering machine icon (SL400A only)
Answering machine switched on;
Flashes: answering machine is recording a
message or is being operated by another internal party
¢
¢
¢
¢
¢
¢
¢
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / overview.fm / 28.04.2010
Display symbols
Display symbols
The following symbols are displayed dependent on the settings and the operating status of
your telephone:
Signal strength i(¢ page 57)
or ECO Mode+ icon ¼ (¢ page 57)
Answering machine activated (SL400A only)
Bluetooth activated (¢ page 66)
or ô/ õ (Bluetooth headset/data device) connected
Ringtone switched off (¢ page 72)
or ñalert tone activated (¢ page 72)
Keypad lock switched on (¢ page 22)
i
»
Ã
¼ 08:00
Battery charging (¢ page 17)
Battery charge status (¢ page 17)
ó ˝
V
07:15
INT 1
05 Apr
Ã
™
¾
02
10
09
08
Calls
Calendar
Alarm switched on and wake-up time set (¢ page 60)
Current time (¢ page 16)
Current day and month (¢ page 16)
Name of the handset (¢ page 63)
Number of new messages:
u à on the answering machine (¢ page 40)
u ™ in the missed calls list (¢ page 40)
u ¾ in the SMS list (¢ page 43)
u in the missed alarms list (¢ page 41)
Establishing a connection
Connection established
Connection cannot be established or connection interrupted
External call (¢ page 29)
Internal call (¢ page 61)
Answering machine
is recording (¢ page 50)
Alarm (¢ page 60)
Anniversary (¢ page 58)
Appointment (¢ page 58)
Signalling
z
Version 4, 16.09.2005
Ø«Ú
ØìÚ
W
ØåÚ
ØðÚ
X
ØþÚ
ØáÚ
3
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / overview.fm / 28.04.2010
Display keys
Other display symbols
Information
Query
Action complete
Action failed
Switch from earpiece to
handsfree mode
(¢ page 31)
Switch from handsfree to
earpiece mode
(¢ page 31)
Ð
‰
¶
Save
2
1
2
1 Current display key function
2 Display keys
Version 4, 16.09.2005
Á
Snooze mode (¢ page 60)
°
Main menu symbols
The functions of the display keys change
depending on the particular operating situation. Example:
Important display keys:
Calls
Open call lists.
Calendar
Open calendar.
Options
Open a menu for further functions.
OK
Confirm selection.
Û
Delete key: delete character by
character/word by word from
right to left.
Back
Go back one menu level or cancel operation.
Save
Save entry.
à
Forward a call to the answering
machine.
4
Room monitor activated
(¢ page 64)
Œ
Display keys
Back
Û
À
‹
1
Please wait...
Ç
Ê
á
SMS
ò
Ë Ì
 Ï
Back
Ç
ò
É
Ê
Ë
Ì
á
Â
Ï
É
OK
Select Services
Bluetooth
Additional Features
Call Lists
SMS
Voice Mail
Organizer
Directory
Settings
Information on using the menus
(¢ page 21)
Menu overview (¢ page 25)
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / SL400AIVZ.fm / 28.04.2010
Contents
Contents
Gigaset SL400/SL400A – your high-quality accessory . . . . . . . . . . . . . . . . 1
Brief overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Display symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Display keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Main menu symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
First steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Checking the package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Installing the base and charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting the charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting up the handset for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Establishing the mini USB connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
What would you like to do next? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using the phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using the control key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using keys on the keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Correcting incorrect entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating keypad lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
21
21
21
22
22
23
Menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Making an external call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accepting a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Calling Line Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using handsfree mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching to mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifying automatic network provider code (preselection) . . . . . . . . . . . . . . . . . . .
29
29
29
30
31
31
32
Version 4, 16.09.2005
Making calls using network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Restricting Calling Line Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using ringback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving call waiting during an external call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using call divert (CD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using consultation call, call swap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33
33
33
34
34
5
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / SL400AIVZ.fm / 28.04.2010
Contents
Using the directory and lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Redial list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Incoming SMS message list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Answering machine list (Gigaset SL400A only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Opening lists with the message key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Missed alarms list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35
39
39
39
39
40
41
Sending SMS (text messages) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Writing/sending SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving an SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SMS with vCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving notifications via SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using SMS mailboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting SMS centres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving SMS on a PABX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating SMS function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SMS troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
42
43
45
45
46
47
48
48
49
Operating the Gigaset SL400A base answering machine . . . . . . . . . . . . 50
Operating via the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating call screening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the recording parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resetting fast access for the answering machine using key 1 . . . . . . . . . . . . . . . . . .
Operating when on the move (remote operation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50
53
53
54
54
Using the network mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Configuring fast access for the network mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Viewing the network mailbox message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
ECO DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Setting an appointment (calendar) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Displaying missed appointments, anniversaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Setting the alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Using multiple handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Registering handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deregistering handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Locating a handset ("Paging") . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making internal calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Listening in to an external call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the name of a handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing a handset's internal number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
60
61
61
61
61
63
63
64
Version 4, 16.09.2005
Using a handset as a room monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Using Bluetooth devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
6
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / SL400AIVZ.fm / 28.04.2010
Contents
Defining handset settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Quick dialling numbers and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the display language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting keypad illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating auto answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the handsfree/earpiece volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting a handsfree profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Resource Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating advisory tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting your own area code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restoring the handset default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
68
69
69
70
70
70
71
71
72
73
74
74
Setting the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Activating/deactivating music on hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating repeater support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Protecting against unauthorised access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resetting the base to the default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
74
74
75
75
Connecting the base to the PABX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Selecting dialling mode and recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving an access code (outside line code) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching temporarily to tone dialling (DTMF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
76
76
77
77
Service (Customer Care) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Questions and answers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Authorisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Guarantee Certificate - United Kingdom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Guarantee Certificate - Ireland . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
79
80
80
81
Protecting our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Caring for your telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact with liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Writing and editing text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
83
83
84
85
Accessing additional functions via the PC interface . . . . . . . . . . . . . . . . . 85
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Mounting the base on the wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Version 4, 16.09.2005
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
7
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / security.fm / 28.04.2010
Safety precautions
Safety precautions
Warning
Be sure to read this user guide and the safety precautions before using your telephone.
Explain their content and the potential hazards associated with using the telephone to your
children.
$
Use only the power adapter supplied, as indicated on the underside of the base.
Use only rechargeable batteries that correspond to the specification provided on
page 84, as this could otherwise result in significant health risks and personal injury.
Using your telephone may affect nearby medical equipment. Be aware of the technical conditions in your particular environment, e.g., doctor's surgery.
Do not hold the rear of the handset to your ear when it is ringing or when handsfree
mode is activated. Otherwise you risk serious and permanent damage to your hearing.
Your Gigaset is compatible with the majority of digital hearing aids on the market.
However, perfect function with all hearing aids cannot be guaranteed.
The handset may cause interference in analogue hearing aids. If you require assistance, please contact the hearing aid supplier.
Do not install the base or charger in bathrooms or shower rooms. The base and
charger are not splashproof (¢ page 83).
Do not use your phone in environments with a potential explosion hazard (e.g., paint
shops).
ƒ
If you give your Gigaset to a third party, make sure you also give them the user guide.
Remove faulty bases from use or have them repaired by our Service, as they could
interfere with other wireless services.
Please note
u Not all of the functions described in this user guide are available in all countries.
u The device cannot be used in the event of a power failure. It is also not possible to trans-
Version 4, 16.09.2005
mit emergency calls.
8
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
First steps
First steps
Checking the package contents
1
4
2
3
5
7
6
8
Version 4, 16.09.2005
J
9
K
L
1 One Gigaset SL400/SL400A base
2 One base cover stand
3 One power adapter for the base
4 One Gigaset handset
5 One battery
6 One battery cover
7 One belt clip
8 One charger
9 One power adapter for the charger
J One phone cord
K One user guide
L One quick start guide
9
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
First steps
Installing the base and charger
The base and charger are designed for use in dry rooms in a temperature range of
+5°C to +45°C.
¤ Install the base on a level, non-slip surface at a central point in the building or
mount the base on the wall (¢ page 90).
Please note
Pay attention to the range of the base.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings. The range is reduced when Eco Mode (¢ page 57) is activated.
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
Please note:
u Never expose the telephone to the influence of heat sources, direct sunlight or
other electrical devices.
Version 4, 16.09.2005
u Protect your Gigaset from moisture, dust, corrosive liquids and fumes.
10
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
First steps
Connecting the base
¤ Connect power adapter 1 and
1
phone jack 2 to the base and
place the cables in the cable
recesses.
2
¤ Place the cover in the notches on the
back of the base and click into place
(not if mounting on the wall).
¤ First connect the power
3
1
4
1
adapter 3.
¤ Then connect the phone
jack 4.
Please note:
u The power adapter must always be connected, as the phone will not operate
without a mains connection.
u Use only the power adapter and phone cord supplied. Pin connections on tele-
Version 4, 16.09.2005
phone cables can vary (pin connections ¢ page 84).
11
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
First steps
Connecting the charger
2
¤ Connect the flat plug from the
1
power adapter 1.
¤ Plug the power adapter into the
plug socket 2.
4
To disconnect the plug from the charger,
press the release button 3 and
disconnect the plug 4.
Version 4, 16.09.2005
3
12
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
First steps
Setting up the handset for use
The display is protected by a plastic film.
Please remove the protective film!
Inserting the battery and closing the battery cover
¤ First insert battery with the con¤
tact surface facing down a.
Then press the battery downwards b until it clicks into place.
b
a
¤ First, align the protrusions
Version 4, 16.09.2005
¤
on the side of the battery
cover with the notches on
the inside of the casing.
Then press the cover until it
clicks into place.
13
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
First steps
To reopen the battery cover to replace the battery:
¤ Remove the belt clip
(if attached).
¤ Insert your fingernail into the
notch at the bottom of the
casing and pull the battery
cover upwards.
To change the battery, insert
your fingernail into the notch in
the casing and pull the battery
upwards.
Attaching the belt clip
The handset has notches on each side to attach the belt clip.
¤ To attach – press the belt clip onto the
back of the handset so that the protrusions on the belt clip engage with the
notches.
¤ To remove – press the centre of the
belt clip firmly with your right thumb,
push the fingernail of your left index
finger up between the clip and the
housing and pull the clip in an upward
direction.
Placing the handset in the charger
¤ Place the handset in the charger with its display facing forward.
The handset is pre-registered with the base. You do not need to register the handset again. If you wish to use your handset with a different base or use additional
handsets with your base, you have to register the handset manually (¢ page 60).
To charge the battery, leave the handset in the charger.
Please note
Version 4, 16.09.2005
Only place the handset in the charger that is intended for it.
14
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
First steps
First battery charge and discharge
The correct charge status can only be displayed once the battery is first fully
charged and discharged.
¤ Place the handset in the charger for three
hours.
¤ Once the battery is
3hours
fully charged, remove
the handset from the
charger and do not
put it back again until
the battery is fully discharged.
Please note
u After the first battery charge and discharge, you may place your handset in
the charger after every call.
u Always repeat the charging and discharging procedure if you remove the
battery from the handset and reinsert it.
u The battery may heat up during charging. This is not dangerous.
u After a time, the charge capacity of the battery will decrease for technical
Version 4, 16.09.2005
reasons.
15
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
First steps
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
Please note
Depending on your network provider, the date and time may be displayed automatically.
¤ Press the key below §Set Time§ on the disCalls
play screen to open the input field.
(If you have already set the time and
date, open the input field via the menu
¢ page 28.)
Set Time
Date/Time
The Date/Time submenu is shown on the
display.
¤ The active input position flashes.
Enter day, month and year as an
8-digit number via the keypad,
e.g., Q4Q4
2Q
Q for 04/04/2010.
Date:
01.03.2010
Time:
00:00
Back
Save
Press the right or left control key
to change the input position and
correct an entry.
¤ Press down on the control key to switch
to the time input field.
Date/Time
Date:
Version 4, 16.09.2005
¤ Enter the hours and minutes as four
digit numbers via the keypad,
e.g., QM
5 for 07:15 am.
Change the input position with the
control key if necessary.
16
04.04.2010
Time:
00:00
Back
Save
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
First steps
Back
Save
¤ Press the key below §Save§ on the display screen to confirm your entry.
Date/Time
‰
Saved
The display shows Saved. You will hear a
confirmation tone and the handset will
automatically return to idle status.
Display in idle status
Once the phone is registered and the time set, the idle status is shown as in this
example. If the answering machine is activated, the answering machine icon à is
displayed in the header.
Displays
Version 4, 16.09.2005
u Reception between the base and the handset:
iÃ
V
07:15
– Good to poor: Ð i Ñ Ò
INT 1
04 Apr
– No reception: | flashes
Green: Eco Mode (¢ page 57) activated
u Battery charge status:
– { white: charged over 66%
– { white: charged between 33% and 66%
Calls
Calendar
– y white: charged between 10% and 33%
– y red: charged below 10%
– y flashes red: battery almost empty (less than 10-minutes talktime)
– xy xy x{ x{ white: battery charging
u INT 1
Internal name of the handset (¢ page 63)
If Eco Mode+ (¢ page 57) is activated, the ¼ icon is displayed in the top left corner of the display.
Your answering machine is set with a pre-recorded announcement.
Your phone is now ready for use!
17
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
First steps
Establishing the mini USB connection
The mini USB connection is on the
underside of your Gigaset handset.
Connecting the headset with jack connectors
You can connect the headset with a 2.5 mm jack connector using the USB-to-jack
adapter.
See the relevant product page at www.gigaset.com for information on recommended headsets.
The headset volume corresponds to the settings for the earpiece volume.
Connecting the USB data cable
Version 4, 16.09.2005
You can connect a standard USB data cable with a USB mini-B connector to synchronise your handset with a PC. To use this function, the Gigaset QuickSync software must be installed (¢ page 85).
18
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
First steps
What would you like to do next?
Now you have successfully set up your Gigaset, you will certainly want to adapt it
to your personal requirements. Use the following guide to quickly locate the most
important subjects.
If you are unfamiliar with menu-driven devices such as other Gigaset telephones,
read the section entitled "Using the phone" (¢ page 20) first.
Information on ...
Setting ringtones and silent alert
Recording your own announcement for the
answering machine
Using Bluetooth devices
Connecting the phone to the PC
Registering existing Gigaset handsets to a base
Transferring directory entries from existing Gigaset
handsets to new handset(s)
Setting Eco Mode / Eco Mode+
Preparing the telephone for SMS reception
Operating the telephone on a PABX
Setting the earpiece volume
g page 71
... is located here.
g page 50
g page 66
g page 85
g page 60
g page 37
g page 57
g page 42
g page 76
g page 70
Version 4, 16.09.2005
If you have any questions about using your phone, please read the tips
on troubleshooting (¢ page 79) or contact our Service team
(¢ page 78).
19
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
Using the phone
Using the phone
Using the control key
Below, the side of the control key that you must press in the
respective operating situation is marked in black (top, bottom,
right, left, centre), e.g., v for "press right on the control key"
or w for "press the centre of the control key".
The control key has a number of different functions:
When the handset is in idle status
s
v
u
t
Open the directory.
Open the main menu.
Open the list of handsets.
Call up the menu for setting the handset's call volume (¢ page 70).
In the main menu
t, s, v or u
Navigate to the required function.
In submenus and lists
t/s
Scroll up/down line by line.
In input fields
Use the control key to move the cursor up t, down s, right v or left u.
Press and hold v or u to move the cursor word by word.
During an external call
s
u
t
Open the directory.
Initiate an internal consultation call.
Adjust the loudspeaker volume for earpiece and handsfree mode.
Functions when pressing the middle of the control key
Depending on the operating situation, the key has different functions.
u In idle status the key opens the main menu.
u In submenus, selection and input fields, the key takes on the function of the
display keys §OK§, §Yes§, §Save§, §Select§ or §Change§ .
Please note
Version 4, 16.09.2005
These instructions demonstrate the main menu being opened by pressing the
right of the control key and functions being actuated by pressing the appropriate display key. However, if you prefer, you can use the control key as described
above.
20
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
Using the phone
Using keys on the keypad
c / Q / * etc.
Press the matching key on the handset.
~
Enter digits or letters.
Correcting incorrect entries
You can correct incorrect characters in the input fields by navigating to the incorrect entry using the control key. You can then:
u Delete the character to the left of the cursor with the display key Ñ (press and
hold to delete the word)
u Insert characters at the cursor position
u Overwrite the highlighted (flashing) character, e.g., when entering time and
date.
Using the menus
Your telephone's functions are accessed using a menu that has a number of levels.
The menu view can be expanded (expert mode •) or simplified. Expert mode is
the active default setting.
Settings or functions that are only available in expert mode are marked in these
instructions by the • icon.
Changing the menu view and menu overview (¢ page 25).
Main menu (first menu level)
¤ When the handset is in idle status, press the right control key v to open the
Version 4, 16.09.2005
main menu.
The main menu functions are shown in the display with
icons. The icon for the selected function is highlighted
and the name of the associated function appears in the
display header.
To access a function, i.e., to open the corresponding
submenu (next menu level):
¤ Use the control key p to select the required function and press the display key §OK§.
Briefly press the display key §Back§ or the end call key
a to revert back to idle status.
Ç
Ê
á
Back
Settings
ò
É
Â
Ï
Ë Ì
OK
21
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
Using the phone
Submenus
The functions in the submenus are displayed as lists
(example on the right).
To access a function:
¤ Scroll to the function with the control key q and
press §OK§.
Briefly press the display key §Back§ or the end call key
a to return to the previous menu level/cancel the
operation.
Settings
Date/Time
Audio Settings
Display + Keypad
Language
Registration
Back
OK
Reverting to idle status
You can revert to idle status from anywhere in the menu as follows:
¤ Press and hold the end call key a.
or:
¤ Do not press any key: after 2 minutes the display will automatically revert to idle
status.
Settings that have not been saved by selecting the display keys §OK§, §Yes§ or §Save§ are
lost.
An example of the display in idle status is shown on page 17.
Activating/deactivating the handset
a
With the phone in idle status, press and hold the end call key (confirmation tone) to switch off the handset.
Press and hold the end call key again to switch the handset on.
Please note
When the handset is switched on or placed in the charger, an animation showing the Gigaset logo is displayed for several seconds.
Activating/deactivating keypad lock
Keypad lock prevents any inadvertent use of the phone.
#
Press and hold the hash key in idle status to activate or deactivate keypad lock. You will hear the confirmation tone.
If keypad lock is activated, you will see a message when you press a key.
Keypad lock deactivates automatically when you receive a call. It is reactivated
when the call is finished.
Please note
Version 4, 16.09.2005
When keypad lock is active, you cannot even call emergency numbers.
22
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
Using the phone
Using this guide
The operating steps are shown in abbreviated form.
Example:
The illustration:
v ¢ Ï ¢ Eco Mode ¢ Eco Mode+ (³ = on)
means:
¤ Press right on the control key v
to open the main menu.
Ç
Settings
Ê
ò
É
Â
Ï
¤ Press right, left, down and up on
control key p to navigate to the
Settings submenu.
Ë Ì
á
Back
OK
¤ Press the display key §OK§ to confirm
your selection.
Settings
Registration
¤ Press down on the control key s
Telephony
until the Eco Mode menu option
appears on the display.
System
Menu View
Eco Mode
Back
OK
¤ Press the display key §OK§ to confirm
Version 4, 16.09.2005
your selection.
23
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / starting.fm / 28.04.2010
Using the phone
Eco Mode
³
´
Eco Mode
Eco Mode+
Back
¤ Press down on the control key s
until the Eco Mode+ menu option
appears on the display.
Change
¤ Press the display key §Change§ to
activate/deactivate the function.
Eco Mode
Eco Mode
Eco Mode+
Back
³
³
The change is effective immediately
and does not need to be confirmed.
Change
¤ Press the key below §Back§ on the dis-
Version 4, 16.09.2005
play screen to jump back to the previous menu level.
or
Press and hold the end call key a
to return to idle status.
24
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / menuetree.fm / 28.04.2010
Menu overview
Menu overview
Setting simplified or expert mode
The menu view can be expanded (expert mode •) or simplified. Expert mode is the active
default setting. Menu options that are only available in expert mode are marked with the •
icon.
To change these settings:
Select v ¢ Ï ¢ Menu View ¢ Simplified or Complete (expert mode) ¢ §Select§ (the
active mode is marked with Ø)
Open the main menu: press v when the phone is in idle mode.
Ç Select Services
Withhold Number
All Calls
¢ page 33
Call Divert
Call Waiting
Ringback off
ò Bluetooth
¢ page 33
Own Device
¢ page 66
¢ page 66
¢ page 66
¢ page 67
¢ page 67
Room Monitor
¢ page 64
Activation
Search for Headset
Search Data Device
Known Devices
É Additional Features
•
Resource Directory
Screensavers
Caller Pictures
Sounds
Version 4, 16.09.2005
Capacity
¢ page 34
¢ page 33
¢ page 73
¢ page 73
¢ page 73
¢ page 73
25
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / menuetree.fm / 28.04.2010
Menu overview
Ê Call Lists
All Calls
Outgoing Calls
Accepted Calls
Missed Calls
Ë SMS
¢ page 39
¢ page 39
¢ page 39
¢ page 39
You have activated an SMS mailbox (general or private) without a PIN
New SMS
Incoming
Draft
¢ page 42
¢ page 44
¢ page 42
You have activated an SMS mailbox with a PIN or 2-3 mailboxes
Mailbox
New SMS
Incoming
Draft
Mailbox 1
Mailbox 2
Mailbox 3
•
New SMS
Incoming
Draft
Settings
Service Centres
SMS Mailboxes
Version 4, 16.09.2005
Notification
26
¢ page 42
¢ page 44
¢ page 42
¢ page 42
¢ page 44
¢ page 42
¢ page 47
¢ page 46
¢ page 45
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / menuetree.fm / 28.04.2010
Menu overview
Ì Voice Mail
Play Messages ***
Play Messages **
¢ page 56
¢ page 56
¢ page 50
Network Mailbox *
Answer Machine *
Activation **
Announcements **
¢ page 50
Record Announcem. **
Play Announcement **
Delete Announcem. **
•
•
•
•
Recordings **
Call Screening **
Network Mailbox
Set Key 1 **
•
•
•
Record Adv. Msg. **
Play Advisory Msg. **
Delete Adv. Msg. **
¢ page 53
¢ page 53
¢ page 56
Network Mailbox
Answer Machine
¢
¢ page 50
¢ page 50
¢ page 50
¢ page 50
¢ page 51
¢ page 51
¢ page 56
¢ page 56
page 56)
* Only if the number is entered in the network mailbox (
** Base with answering machine only
*** Base without answering machine and number of network mailbox is already entered
á Organizer
Calendar
Alarm Clock
Missed Alarms
Version 4, 16.09.2005
 Directory
¢ page 58
¢ page 60
¢ page 59
¢ page 35
27
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / menuetree.fm / 28.04.2010
Menu overview
Ï Settings
Date/Time
Audio Settings
¢ page 16
Handset Volume
Handsfree Profiles
•
Advisory Tones
Silent Alert
Ringtones (H/Set)
•
Display + Keypad
Music on Hold
Screensaver
Large Font
Colour Schemes
•
Display Backlight
Keypad Illumination
Language
Registration
¢ page 69
Register Handset
De-reg. Handset
•
Select Base
Telephony
Auto Answer
Area Codes
Listening In
Preselection
Access Code
Dialling Mode
•
Recall
System
Handset Reset
Base Reset
Repeater Mode
System PIN
Menu View
Simplified
Complete
Eco Mode
Eco Mode
Version 4, 16.09.2005
Eco Mode+
28
¢ page 70
¢ page 71
¢ page 73
¢ page 72
¢ page 71
¢ page 74
¢ page 69
¢ page 69
¢ page 69
¢ page 70
¢ page 70
¢ page 60
¢ page 61
¢ page 61
¢ page 70
¢ page 74
¢ page 63
¢ page 32
¢ page 76
¢ page 76
¢ page 76
¢ page 74
¢ page 75
¢ page 74
¢ page 75
¢ page 25
¢ page 25
¢ page 57
¢ page 57
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / telefony.fm / 28.04.2010
Making calls
Making calls
If the display backlight is deactivated
(¢ page 70), it can be reactivated by pressing any key. Digit keys appear on the display
for pre-dialling; all other keys do not have
any further functions.
Making an external call
External calls are calls using the public telephone network.
~ c Enter the number and press the
talk key.
or:
c ~ Press and hold the talk key c
and then enter the number.
You can cancel the dialling operation with
the end call key a.
You are shown the duration of the call while
the call is in progress.
Please note
Dialling with the directory (¢ page 35),
call list (¢ page 39), redial list
(¢ page 39) and automatic redial
(¢ page 39) saves you from repeatedly
keying in phone numbers.
Continuing a call on a Bluetooth
headset
Version 4, 16.09.2005
Prerequisite: Bluetooth is activated; a connection has been established between the
Bluetooth headset and the handset
(¢ page 66).
Press the talk key on the headset; it may take
up to 5 seconds to establish a connection to
the handset.
The menu to set the earpiece and microphone volume can be called up during a call
by pressing up on the control key t.
For further details about your headset, see
the accompanying user guide.
Ending a call
a
Press the end call key.
Accepting a call
The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing talk key c.
Accept the call by:
¤ Pressing the talk key c.
¤ Pressing the handsfree key d.
¤ Gigaset SL400: press the display key
§Accept§.
¤ Gigaset SL400A: press the display key
Ô to divert the call to the answering
machine (¢ page 53).
If the handset is in the charger and the Auto
Answer function is activated (¢ page 70),
the handset will automatically accept a call
when you lift it out of the cradle.
To deactivate the ringtone, press the §Silence§
display key.
Accepting a call on a Bluetooth
headset
Prerequisite: Bluetooth is activated; a connection has been established between the
Bluetooth headset and the handset
(¢ page 66).
Only press the talk key on the headset
when the headset rings; it can take up to
5 seconds.
The menu to set the earpiece and microphone volume can be called up during a call
by pressing up on control key t.
For further details about your headset, see
the accompanying user guide.
29
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / telefony.fm / 28.04.2010
Making calls
Using Calling Line
Identification
or
When you receive a call, the caller's number
is displayed on the screen if the following
conditions are met:
u Your network provider supports CLIP, CLI.
– CLI (Calling Line Identification): the
caller's number is transmitted.
– CLIP (Calling Line Identification Presentation): the caller's number is displayed.
u You have requested CLIP from your network provider.
u The caller has requested CLI from the network provider.
Call display with CLIP/CLI
If the number of the caller is saved in your
directory, you will see their name, and if you
have assigned a caller picture to that caller,
this will also be displayed.
Ø«Ú
1234567890
Version 4, 16.09.2005
Accept
30
Gigaset SL400
1
2
Silence
Ø«Ú
1234567890
à
Gigaset SL400A
1
2
Silence
1 Ringtone icon
2 Number or name of caller
The following is displayed in place of the
number:
u External, if no number is transmitted.
u Withheld, if the caller has restricted Calling Line Identification (¢ page 33).
u Unavailable, if the caller has not
arranged Calling Line Identification.
Please note
The ringtone can be switched off for
unknown calls (calls with Calling Line
Identification restricted) (¢ page 72).
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / telefony.fm / 28.04.2010
Making calls
Using handsfree mode
Switching to mute
In handsfree mode, instead of holding the
handset to your ear you can put it down, for
example on the table in front of you. This
allows others to participate in the call.
You can set various handsfree profiles to
optimally adapt your phone to your environment.
You can deactivate your handset's microphone during a call.
h
Press key to mute the handset.
The display shows Microphone
is off.
Press the key again to reactivate
the microphone.
Activating/deactivating handsfree
mode
Activating while dialling
~d
¤
Enter the number and press the
handsfree key.
Inform your caller before you use the
handsfree function so that the caller
knows a third party may be listening.
Please note
u If the telephone is muted, all keys
except the mute key h and the
end-call key a will not work.
u A connected headset will also be
muted.
Switching between earpiece and
handsfree mode
d
Press the handsfree key.
During a call and when listening to the
answering machine (Gigaset SL400A only),
activate or deactivate handsfree mode.
If you wish to place the handset in the
charger during a call:
¤ Press and hold handsfree key d while
placing the handset in the base/charger
and for a further 2 seconds.
For instructions on adjusting the handsfree
volume (¢ page 70).
Please note
Version 4, 16.09.2005
If you have a headset connected, you can
switch between the headset and handsfree mode.
31
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / telefony.fm / 28.04.2010
Making calls
Specifying automatic
network provider code
(preselection)
You can store a call-by-call number (preselection number), which is automatically
placed in front of numbers when you dial
them.
In the "With Preselection" list, specify the
access codes or the first digits of the access
codes that you wish to assign to the preselection number.
In the "Without Preselect." list, enter the
exceptions to the "With Preselection" list.
Example:
Preselection No.
0999
With Preselection
08
Without Preselect.
081
084
All numbers that start with 08, except for 081
and 084, are dialled with the preselection
number 0999.
Phone number
07112345678
08912345678
08412345678
¢
¢
¢
Dialled number
07112345678
0999 08912345678
08412345678
• Saving preselection numbers
v ¢ Ï ¢ Telephony ¢ Preselection
¢ Preselection No.
~
Version 4, 16.09.2005
§Save§
32
Enter or change the preselection number (call-by-call
number).
Press the display key.
Saving or changing entries in the
preselection lists
Each of the two lists can contain 20 entries,
each with 6 digits.
Numbers may be prefixed according to the
country in the "With Preselection" list. This
means, for example, that all national calls or
calls to the mobile network are automatically linked to the preselection number you
have saved previously.
v ¢ Ï ¢ Telephony ¢ Preselection
¢ With Preselection / Without Preselect.
s
Select entry.
~
Enter or edit the first digits of
the number.
§Save§
Press the display key.
Temporarily cancelling
preselection
c (press and hold) ¢ §Options§
¢ Preselection off
¢ ~ (dial number)
Permanently deactivating
preselection
v ¢ Ï ¢ Telephony ¢ Preselection
¢ Preselection No.
Ñ
Press and hold the display key
until the preselection number is
deleted.
§Save§
Press the display key.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / TNet_Features_SAG.fm / 28.04.2010
Making calls using network services
Making calls using
network services
Network services are functions that your
network provider makes available to you.
You have to request these services from your
network provider.
¤ It is not possible to reprogram the network services.
¤ If you require assistance, please contact
your network provider.
Receiving call waiting during
an external call
If the function is activated, during an external call you will hear a call waiting tone to
signal that another external caller is trying to
get through. If you have CLIP (¢ page 30),
the number of the waiting caller or the corresponding directory entry is shown in the
display.
Activating/deactivating call
waiting
Restricting Calling Line
Identification
v ¢ Ç ¢ All Calls ¢ Call Waiting
Status
Activate/deactivate.
§Dial§
Press the display key.
Restrict Calling Line Identification
once (CLIR):
Accepting a waiting call
If you make a call, your number is shown in
the display of the call recipient if that person
has activated CLIP (¢ page 30).
If, in certain instances, you do not wish to
have your number displayed, you can withhold your number for the next call (CLIR).
v ¢ Ç ¢ Withhold Number
~
Enter phone number.
c
Press the talk key.
Using ringback
You are making an external call and hear the
call waiting tone.
You have the following options:
If CLIP (¢ page 30) is activated
§Accept§
Press the display key.
If CLIP is not activated
§Options§ ¢ Accept Waiting Call
Once you have accepted the waiting call,
you can switch between the two callers
("Call swap" ¢ page 34).
Initiating ringback
If the number you have called is engaged,
you can initiate ringback. As soon as the line
belonging to the person you called is free,
your handset will ring.
You hear the busy tone.
§Options§ ¢ Ringback
a
Press the end call key.
Version 4, 16.09.2005
Cancelling ringback
You can cancel a ringback that has already
been initiated.
v ¢ Ç ¢ Ringback off
33
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / TNet_Features_SAG.fm / 28.04.2010
Making calls using network services
Using call divert (CD)
When diverting a call, the call is forwarded to
another connection.
The following options are available:
u All Calls: Calls are diverted immediately.
No more calls are signalled on your
phone.
u No Answer: Calls are diverted if no one
accepts the call within several rings.
u When Busy: Calls are forwarded when
your line is busy. Call is diverted without a
call waiting tone.
v ¢ Ç ¢ All Calls ¢ Call Divert
¤ You can enter data in the following fields:
When:
Select All Calls / When Busy / No Answer.
To Phone Number:
Enter the number to which the call is to
be diverted.
Status:
Activate/deactivate call divert.
§Send§
Press the display key.
a
You will hear a confirmation
announcement. After the
announcement, press the end
call key.
Using consultation call,
call swap
These functions enable you to:
u Call a second external caller (consultation
call)
u Switch between two calls (call swap)
Consultation call
You can call a second external caller. The first
call is placed on hold.
During an external call:
§Ext. Call§
Press the display key.
The previous call is placed on
hold. The other participant
hears an announcement.
~
Enter the second participant's
telephone number.
The phone number is dialled. You are connected to the second participant.
If the caller does not answer, select the display key §End§ to return to the first participant.
Please note
You can also select the second participant's phone number from the directory
or the call list (¢ page 38).
Ending a consultation call
¢ End Active Call
You are reconnected to the first caller.
You can also end the consultation call by
pressing the end call key. The connection is
briefly interrupted and you will receive a call
back. Once you have pressed the talk key,
you are reconnected to the first caller.
§Options§
Call swap
You can speak to both callers one at a time
(call swap).
Prerequisite: You are conducting an external call and have called a second participant
(consultation call) or have accepted a waiting call.
¤ Use q to swap between the participants.
The caller you are currently speaking to is
marked with the æ icon.
Ending the active call.
¢ End Active Call
You are re-connected to the waiting caller.
Version 4, 16.09.2005
§Options§
34
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / direct_charges.fm / 28.04.2010
Using the directory and lists
Using the directory and
lists
The options are:
u Directory
u Redial list
u Incoming SMS message list
u Call lists
u Missed alarms list
u Answering machine list
(Gigaset SL400A only)
You can create a personalised directory for
your own handset. You can also send lists/
entries to other handsets (¢ page 37).
Directory
You can save up to 500 entries in the directory.
Please note
To quickly access a number from the
directory, (quick dial), you can assign the
number to a key (¢ page 68).
Directory
In the directory, you can save:
u Up to three numbers and associated first
names and surnames
u E-mail addresses
u Anniversaries with reminder
u VIP ringtone with VIP icon
u Caller pictures
Open the directory in idle status using the
s key.
Version 4, 16.09.2005
Length of the entries
3 numbers:
each max. 32 digits
First name and surname:
each max. 16 characters
E-mail address:
max. 64 characters
Saving a number in the directory
s ¢ <New Entry>
¤ You can enter data in the following fields:
First Name:/Surname:
Enter first names and/or surnames.
If you do not enter a name in either of the
fields, the phone number is saved and
displayed in place of a surname.
(For instructions on entering text and
special characters, please see
¢ page 85.)
Phone (Home):/Phone (Office):/Phone
(Mobile):
Enter a number in at least one of the
fields.
When scrolling through the directory, the
entries are highlighted by a prefixed symbol: ä/ k/ l.
E-mail:
Enter the e-mail address.
Anniversary:
Select On or Off.
With setting On:
Enter Annivers. (Date) and Annivers.
(Time) and select reminder type: Annivers. (Signal) (¢ page 38).
Caller Melody (VIP):
Mark a directory entry as a VIP (Very
Important Person) by assigning a specific
ringtone to it. VIP calls are recognised by
the ringtone.
When scrolling through the directory, VIP
entries are highlighted by the Æ icon.
Prerequisite: Calling Line Identification
Presentation (CLIP).
Caller Picture:
If required, select a picture to be displayed when this person calls (see "Using
the Resource Directory", page 72).
Prerequisite: Calling Line Identification
Presentation (CLIP).
§Save§
Press the display key.
35
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / direct_charges.fm / 28.04.2010
Using the directory and lists
Order of directory entries
Directory entries are generally sorted alphabetically by surname. Spaces and digits take
first priority. If only the first name was
entered in the directory, this is incorporated
into the sort order instead of the surname.
The sort order is as follows:
1. Space
2. Digits (0–9)
3. Letters (alphabetical)
4. Other characters
To get round the alphabetical order of the
entries, insert a space or a digit in front of the
first letter of the surname. These entries will
then move to the beginning of the directory.
The following functions can be selected
with q:
Display Number
To edit or add to a saved number, or to
save it as a new entry, press Ó after the
number is displayed.
Delete Entry
Delete selected entry.
Copy Entry
to Internal: Send a single entry to a handset (¢ page 37).
vCard via SMS: Send a single entry in
vCard format via SMS.
vCard via Bluetooth: Send a single entry
in vCard format via Bluetooth.
Editing entries
Selecting a directory entry
s
Open the directory.
You have the following options:
u Use s to scroll through the entries until
the required name is selected.
u Enter the first letters of the name (max. 8),
if necessary scroll to the entry with the s
key.
The directory searches for the surname. If
a surname has not been entered, the
directory searches for the first name.
Selecting from the directory
s ¢ s (Select entry)
c
Press the talk key.
(If several numbers are entered,
select the required number by
pressing r and press the talk
key c again).
The number is dialled.
Managing directory entries
Version 4, 16.09.2005
Viewing entries
s ¢ s (Select entry)
§View§
Press the display key. The entry
is displayed.
§Options§
Press the display key.
36
s ¢ s (Select entry)
§View§ §Edit§
¤
Press the display keys one after
the other.
Perform changes and save.
Using other functions
s ¢ s (Select entry)
¢ §Options§ (Open menu)
The following functions can be selected with
q:
Display Number
Edit or add to a saved number and then
dial with c or save as a new entry; to
do so, press Ó after the number is displayed.
Edit Entry
Edit selected entry.
Delete Entry
Delete selected entry.
Copy Entry
to Internal: Send a single entry to a handset (¢ page 37).
vCard via SMS: Send a single entry in
vCard format via SMS.
vCard via Bluetooth: Send a single entry
in vCard format via Bluetooth.
Delete All
Delete all entries in the directory.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / direct_charges.fm / 28.04.2010
Using the directory and lists
Copy All
to Internal: Send the complete list to a
handset (¢ page 37).
vCard via Bluetooth: Send the complete
list in vCard format via Bluetooth.
Available Memory
Display the number of entries that are still
available in the directory (¢ page 35).
Using quick dial keys
¤ Press and hold the required quick dial key
(¢ page 68).
Transferring the directory to
another handset
Prerequisites:
u The sending and receiving handsets must
both be registered to the same base.
u The other handset and the base can send
and receive directory entries.
s ¢ s (Select entry)
¢ §Options§ (Open menu)
¢ Copy Entry / Copy All ¢ to Internal
s
Select the internal number of
the receiving handset and press
§OK§.
You can transfer several individual entries
one after the other by responding to the
Entry copied - Copy next entry? prompt
with §Yes§.
A successful transfer is confirmed by a message and confirmation tone on the receiving
handset.
Please note:
u Entries with identical numbers are not
overwritten on the receiving handset.
u The transfer is cancelled if the phone
Version 4, 16.09.2005
rings or if the memory of the receiving
handset is full.
u Pictures and sounds assigned to entries
are not transferred.
Transferring the directory as a
vCard with Bluetooth
In Bluetooth mode (¢ page 66), you can
transfer directory entries in vCard format,
e.g., to exchange entries with your mobile
phone.
s ¢ s (select entry)
¢ §Options§ (open menu)
¢ Copy Entry / Copy All
¢ vCard via Bluetooth
The list of "Known Devices" (¢ page 67) is
displayed.
s
Select device and press §OK§.
Receiving a vCard with Bluetooth
If a device from the "Known Devices" list
(¢ page 67) sends a vCard to your handset,
this occurs automatically. You are informed
about it via the display.
If the sending device does not appear in the
list, you will be asked on the display to enter
the device PIN for the sending device:
~
Enter the PIN for the sending
Bluetooth device and press §OK§.
The transferred vCard is available as a directory entry.
Copying the displayed number to
the directory
You can copy numbers displayed in a list,
e.g., the call list or the redial list, or in an SMS,
to the directory.
A number is displayed:
§Options§ ¢ Copy to Directory
¤ Complete the entry (¢ page 35).
Gigaset SL400A: Message playback is interrupted during the number transfer from the
answering machine list.
37
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / direct_charges.fm / 28.04.2010
Using the directory and lists
Copying a number or e-mail
address from the directory
In some operating situations, you can open
the directory to copy a number or e-mail
address, for example. Your handset need not
be in idle status.
¤ Depending on the operating situation,
open the directory with s or Ó.
q
Select entry (¢ page 36).
Storing an anniversary in the
directory
You can save an anniversary for every
number in the directory and specify a time
when you will receive a reminder call on the
anniversary.
(Default setting: Anniversary: Off).
s ¢ s (Select entry)
§View§ §Edit§ Press the display keys one after
the other.
s
Scroll to the Anniversary line.
v
Select On.
¤ You can enter data in the following fields:
Annivers. (Date)
Enter day/month/year in 8-digit format.
Annivers. (Time)
Enter the hour/minute for the reminder
call in 4-digit format.
Annivers. (Signal)
Select the reminder type.
§Save§
Press the display key.
Please note
Version 4, 16.09.2005
A time must be specified for reminder
calls. If you select a visual signal, a time is
not required and is automatically set to
00.00.
38
Deactivating anniversaries
s ¢ s (Select entry)
§View§ §Edit§ Press the display keys one after
the other.
s
Scroll to the Anniversary line.
v
Select Off.
§Save§
Press the display key.
Reminder call on an anniversary
In idle status, a reminder call is indicated on
the handset display and by the selected
ringtone and volume that has been set for
internal calls (¢ page 71).
ØðÚ
Miller,
Frank
Off
SMS
You can:
§SMS§
Write an SMS.
Press the display key to
acknowledge and end the
reminder call.
When you are on the phone, a reminder call
is indicated on the handset with a single
advisory tone.
Anniversaries that are indicated during a call
and are not acknowledged are entered in
the Missed Alarms list (¢ page 41).
§Off§
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / direct_charges.fm / 28.04.2010
Using the directory and lists
Redial list
Incoming SMS message list
The redial list contains the twenty numbers
last dialled with the handset (max. 32 digits).
If one of the numbers is in the directory, the
corresponding name is displayed.
All received SMS messages are saved in the
incoming message list (¢ page 43).
Manual redial
c
s
c
Press the key briefly.
Select entry.
Press the talk key again. The
number is dialled.
When a name is displayed, you can display
the corresponding phone number by pressing the display key §View§.
Managing entries in the redial list
c
s
Version 4, 16.09.2005
Press the key briefly.
Select entry.
§Options§
Open menu.
The following functions can be selected with
q:
Copy to Directory
Copy an entry to the directory (page 35).
Automatic Redial
The selected number is automatically
dialled at fixed intervals (at least every 20
seconds). The talk key c flashes; "open
listening" is activated.
– Party answers:
Press the talk key c. The function
is terminated.
– Party does not answer:
The call is terminated after approx.
30 seconds.
The function is terminated after pressing any
key or after ten unsuccessful attempts.
Display Number (as in the directory,
page 36)
Delete Entry (as in the directory, page 36)
Delete All (as in the directory, page 36)
Answering machine list
(Gigaset SL400A only)
You can use the answering machine list to
listen to the messages that are on the
answering machine.
Call lists
Prerequisite: Calling Line Identification
Presentation (CLIP, page 30)
Your telephone stores various types of calls:
u Outgoing calls ( š)
u Accepted calls ( ›)
u Missed calls ( ™)
u Calls recorded by the answering machine
(Ã, Gigaset SL400A only)
You can view each type of call separately or
gain an overview of all calls. Each call record
contains the last 20 numbers in its category.
When in idle status, open the call lists by
selecting the §Calls§ display key or via the
menu:
v¢Ê
39
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / direct_charges.fm / 28.04.2010
Using the directory and lists
List entry
New messages are displayed at the top.
Example of list entries:
All Calls
™ Frank
14.05.10, 15:40
š 089563795
14.05.10, 15:32
™ ...0123727859362922
14.05.10, 15:07
View
Options
u List type (in header)
u Status of entry
Bold: New entry
u Number or name of caller
u Date and time of call (if set, page 16)
u Type of entry
Press the talk key c to call the selected
caller back.
Select the §View§ display key to access additional information, including for example
the number linked to the name
Select the §Options§ display key to select the
following options:
Version 4, 16.09.2005
Copy to Directory
Copy the number to the directory.
Delete Entry
Delete selected entry.
Delete All
Delete all entries.
When you quit the call lists, all entries are set
to the status "old", i.e., the next time you call
up the list, they will no longer be shown in
bold.
40
Opening lists with the
message key
Use the message key f to open the following list selection:
u Answering machine list (Gigaset SL400A
only) or network mailbox, if your network
provider supports this function and fast
access is set for the network mailbox
(¢ page 56).
u Incoming SMS message list (¢ page 43)
If several mailboxes are set up
(¢ page 46), several lists are displayed.
u Missed calls list
u Missed alarms list (¢ page 41)
An advisory tone sounds as soon as a new
message arrives in a list. The f key
flashes (it goes off when the key is pressed).
In idle status, the display shows an icon for
the new message:
Icon
Ã
™
Ë
New message...
... in the answering machine list
(Gigaset SL400A only) or on the network mailbox
... in the Missed Calls list:
... in the SMS list
... in the Missed Alarms list:
The number of new entries is displayed
under the corresponding icon.
Ã
œ
¾
02
10
09
08
Please note
If calls are saved in the network mailbox,
you will receive a message if the appropriate settings have been made (see your
network provider user guide).
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / direct_charges.fm / 28.04.2010
Using the directory and lists
After pressing the message key f, you
can see all lists containing messages and the
network mailbox list.
Lists containing new messages are at the top
of the list and are marked in a bold font.
Messages & Calls
Calls:
(3)
Missed Alarms:
(1)
SMS:
(2)
Back
OK
Version 4, 16.09.2005
Select a list with q. To open, press §OK§.
Missed alarms list
Missed (unacknowledged) appointments
from the calendar (¢ page 58) and anniversaries (¢ page 38) are saved in the Missed
Alarms list under the following circumstances:
u You do not accept an appointment/anniversary.
u The appointment/anniversary was signalled during a phone call.
u The handset is deactivated at the time of
the appointment/anniversary.
u Automatic redial was activated at the
time of an appointment/anniversary
(¢ page 39).
u Open the list by pressing the message
key f (¢ page 40).
Each entry is displayed with:
u Number or name
u Date and time
The most recent entry is at the head of the
list.
Press the display key §Delete§, to delete the
selected entry.
If 10 entries are already stored in the list, the
next appointment reminder will delete the
oldest entry.
41
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / sms_BRD_neutral.fm / 28.04.2010
Sending SMS (text messages)
Sending SMS
(text messages)
Your phone is delivered ready to send SMS
messages immediately.
Prerequisites:
u Calling Line Identification is enabled for
Sending an SMS
c
or:
§Options§
Send
SMS
~/s
your phone line.
u Your network provider supports SMS on
the fixed line network (information on
this can be obtained from your network
provider).
u To receive SMS messages, you must be
registered with your service provider. This
occurs automatically when you send your
first SMS.
Please note
If your phone is connected to a PABX,
please read (¢ page 48).
Writing/sending SMS
Writing an SMS
v¢Ë
Mailbox 2 Select mailbox if necessary and
press §OK§.
~
Enter mailbox PIN if necessary
and press §OK§.
New SMS Select and press §OK§.
~
Write an SMS.
Please note
Version 4, 16.09.2005
u For instructions on entering text and
special characters, please see
page 85.
u An SMS may contain up to 612 characters. If there are more than 160
characters, the SMS is sent as a linked
SMS (up to 4 SMS messages with 153
characters each). The top right of the
display shows how many characters
are still available and which part of a
linked SMS is currently being written.
42
Press the talk key
§Send§
Press the display key.
Select and press §OK§.
Select and press §OK§.
Select number with access code
(even if you are in that area)
from the directory or enter
directly. For sending SMS messages to an SMS mailbox: add
the mailbox ID to the end of the
number.
Press the display key. The SMS is
sent.
Please note
u If you are interrupted by an external
call while writing an SMS, the text is
automatically saved in the draft SMS
list.
u If the memory is full, or if the SMS
function on the base is being used by
another handset, the operation is cancelled. An appropriate message
appears in the display. Delete SMS
messages you no longer require or
send the SMS later.
Draft SMS list
You can save an SMS in the draft SMS list, and
edit and send it later.
Saving an SMS in the draft SMS list
¤ You are writing an SMS (¢ page 42).
§Options§
Press the display key.
Save Entry Select and press §OK§.
Opening the draft message list
v ¢ Ë ¢ if necessary ~ (mailbox,
mailbox PIN) ¢ Draft
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / sms_BRD_neutral.fm / 28.04.2010
Sending SMS (text messages)
The first list entry is displayed, e.g.,
Saved
14.05.10, 15:07
If the entry has been saved with the phone
number, i.e., when the SMS was saved from
the incoming message list, the number is
displayed in the first line.
Reading or deleting SMS messages
¤ Open the draft message list and then:
q
Select SMS.
§Read§
Press the display key. The text is
displayed. Scroll line by line
using q.
or delete the SMS with
§Options§ ¢ Delete Entry ¢ §OK§.
Writing/editing an SMS
¤ You are reading an SMS in the draft SMS
list.
§Options§
Open menu.
You have the following options:
Copy
Send stored SMS.
Edit
Edit the text of the saved SMS and then
send it (¢ page 42).
Character Set
Display text in the selected character set.
Deleting draft SMS list
¤ Open the draft message list and then:
§Options§
Version 4, 16.09.2005
Open menu.
Delete All Select, press §OK§ and confirm
with §Yes§. The list is deleted.
Receiving an SMS
All received SMS messages are saved in the
incoming SMS list. Linked SMS messages are
displayed as one message. If this is too long
or is not transferred completely, it is split into
individual messages. Since an SMS remains
in the list even after it has been read, regularly delete SMS messages from the list.
The display tells you if the SMS memory is
full.
Activating/deactivating first
ringtone muting
Each incoming SMS is signalled by a single
ring (ringtone as for external calls). If you
accept such a "call", the SMS is lost. To prevent this ring, suppress the first ringtone for
all external calls.
v
Open the main menu.
*#Q5# O
Press keys.
Q §OK§ Make the first ringtone audible.
or:
§OK§ Mute the first ringtone.
Incoming SMS list
The incoming message list contains:
u All received SMS messages, starting with
the most recent.
u SMS messages that could not be sent due
to an error.
New SMS messages are signalled on all
Gigaset handsets by the Ë icon on the display, the flashing message key f and an
advisory tone.
43
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / sms_BRD_neutral.fm / 28.04.2010
Sending SMS (text messages)
Opening the incoming message list
with the f key
f
Press.
The incoming message list is indicated by
the mailbox name and the number of entries
(example):
SMS:
(2)
Bold: new entries
Normal font: old entries
If necessary select a mailbox and open list by
selecting §OK§ (enter mailbox PIN if required
and confirm by pressing §OK§).
The number and date of receipt are displayed in the entry list.
0123727859362922
Reading or deleting SMS messages
¤ Open the incoming message list, then:
q
§Read§
Select SMS.
Press the display key. The text is
displayed. Scroll line by line
using q.
or delete the SMS with
§Options§ ¢ Delete Entry ¢ §OK§.
After you have read a new SMS, it is given the
status "Old" (is no longer shown in bold).
Changing the character set
¤ Read SMS
§Options§
Press the display key.
Character Set
Text is shown in the selected character
set.
14.05.10, 09:07
Opening the incoming message list via
the SMS menu
v ¢ Ë ¢ if necessary select mailbox,
enter mailbox PIN) ¢ Incoming
Deleting the incoming message list
Version 4, 16.09.2005
All new and old SMS messages in the list are
deleted.
¤ Open the incoming message list.
§Options§
Open menu.
Delete All
Select, press §OK§ and confirm
with §Yes§. The list is deleted.
44
Replying to or forwarding SMS
messages
¤ Read SMS
§Options§
Press the display key.
You have the following options:
Reply
Write and send a new SMS in reply to the
sender (¢ page 42).
Edit
Edit the text in the SMS and return it to
the sender (¢ page 42).
Forward
Forward the SMS to another number
(¢ page 42).
Character Set
Text is shown in the selected character
set.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / sms_BRD_neutral.fm / 28.04.2010
Sending SMS (text messages)
Copying the number to the
directory
Copying the sender's number
¤ Open the incoming message list and
select the SMS (¢ page 43).
§Options§ ¢ Copy to Directory
¤ Complete the entry (¢ page 37).
Please note
An attached mailbox identifier is added
to the directory.
Copying/dialling numbers from an
SMS
¤ Read the SMS and scroll to the telephone
number.
The digits are highlighted.
Ó
Press the display key.
Complete the entry (¢ page 37).
or:
c
Press the talk key to dial the
number.
If you wish to use the number to send an
SMS:
¤ Save the number with the local area code
(access code) in the directory.
SMS with vCard
Version 4, 16.09.2005
The vCard is an electronic business card. It is
displayed by the Å icon in the body of the
SMS.
A vCard can include:
u Name
u Private number
u Business number
u Mobile phone number
u Birthday
Entries in a vCard can be saved to the directory individually.
Opening the vCard
¤ Read the SMS containing the vCard.
§View§
q
Press the display key.
To return to the body of the
SMS, press §Back§.
Select number.
§Save§
Press the display key.
When you save a number, the directory is
opened automatically. The number and
name are copied. If a birthday is entered on
the vCard, the date is copied to the directory
as an anniversary.
¤ If necessary, edit the entry in the directory and save it. You will return to the
vCard automatically.
• Receiving notifications
via SMS
You can be notified about missed calls or
new answering machine messages (Gigaset
SL400A only) via SMS.
Prerequisite: For missed calls, the caller's
number (CLI) must have been transmitted.
Notification is sent to your mobile phone or
another phone with SMS functionality.
You only need to save the telephone
number to which you wish the notification
to be sent.
v ¢ Ë ¢ Settings ¢ Notification
¤ You can enter data in the following fields:
To:
Enter the number to which the SMS
should be sent.
On missed call
Select On if you require SMS notification.
On message on answer machine
(Gigaset SL400A only)
Select On if you require SMS notification.
§Save§
Press the display key.
45
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / sms_BRD_neutral.fm / 28.04.2010
Sending SMS (text messages)
Warning
Do not enter your own fixed line network
number for the notification of missed
calls. This can lead to chargeable endless
looping.
Using SMS mailboxes
The general mailbox is the default setting.
Anyone can access this mailbox and it cannot be protected by a PIN. You can set up
three additional personal mailboxes and
protect these with a PIN. Each mailbox is
identified by a name and a "mailbox ID" (a
kind of extension number).
Please note:
u If you operate a number of devices
(bases) with SMS functionality on a single
phone line, then each SMS mailbox ID
may only occur once. In this case, you
must also change the preset ID of the
general mailbox ("0").
u Only use personal mailboxes if your service provider supports this function. You
can tell whether this is the case by the
addition of a star (*) to the number of a
(preset) SMS centre.
u If you have forgotten your mailbox PIN,
you can reset it by restoring the base's
default settings. This will delete all SMS
messages from all mailboxes.
•
Setting up and changing a
personal mailbox
Setting up a personal mailbox
v ¢ Ë ¢ Settings ¢ SMS Mailboxes
s
Select mailbox, e.g., Mailbox 2
and press §Edit§.
¤ You can enter data in the following fields:
Activation:
Activate or deactivate mailbox.
Name:
Enter name.
Box-ID:
Select mailbox ID (0–9). You can only
select the available numbers.
Protection:
Activate/deactivate PIN protection.
SMS PIN
If necessary, enter 4-digit PIN.
§Save§
Press the display key.
Active mailboxes are marked with μ in the
mailbox list. They are shown in the SMS list
and can, if necessary, be displayed by pressing the message key f.
Deactivating a mailbox
¤ Set Activation to Off. Confirm message
with §Yes§ if necessary.
All SMS messages saved in this mailbox are
deleted.
Deactivating PIN protection
¤ Set Protection to Off.
The mailbox PIN is reset to 0000.
Changing the name of a mailbox
v ¢ Ë ¢ Settings ¢ SMS Mailboxes
¢ s (Select mailbox)
§Edit§
~
§Save§
Changing a mailbox's PIN and ID
v ¢ Ë ¢ Settings ¢ SMS Mailboxes
¢ s (Select mailbox)
~
Version 4, 16.09.2005
¤
46
Press the display key.
Enter new name.
Press the display key.
Enter mailbox PIN if necessary
and press §OK§.
Set Box-ID, Protection and SMS PIN
(¢ page 46).
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / sms_BRD_neutral.fm / 28.04.2010
Sending SMS (text messages)
Sending an SMS to a personal
mailbox
To send an SMS to a personal mailbox, the
sender must know your ID and enter it after
your number.
¤ You can send your SMS contact an SMS
via your personal mailbox.
Along with this SMS, your SMS contact will
receive your SMS number with current ID
and can save it in their directory. If the ID is
invalid, the SMS will not be delivered.
Setting SMS centres
SMS messages are exchanged between SMS
centres operated by service providers. You
must enter the SMS centre through which
you wish to send and receive SMS messages
into your phone. You can receive SMS messages from every SMS centre that is entered,
provided you have registered with your service provider.
Your SMS messages are sent via the SMS centre that is entered as the active send service
centre (¢ page 47). Only one SMS centre
can be the active send service centre at any
one time.
If no SMS service centre is entered, the SMS
menu only contains the entry Settings.
Enter an SMS service centre (¢ page 47).
• Entering/changing SMS
centres
¤ Find out about the services and special
functions offered by your service provider before you make a new application and/or before you delete pre-configured call numbers.
v ¢ Ë ¢ Settings ¢ Service Centres
s
Select SMS centre (e.g., Service
Centre 1) and press §Edit§.
¤ You can enter data in the following fields:
Active Send:
Select §Yes§ if SMS messages are to be sent
via the SMS centre.
SMS Service Centre no.:
Enter the number of the SMS service and
insert a star if your service provider supports personal mailboxes.
§Save§
Press the display key.
Please note
Ask your service provider for details on
entering service numbers if you wish to
use personal mailboxes (prerequisite:
your service provider supports this function).
Sending an SMS via another SMS
centre
¤ Activate the SMS centre (2 to 4) as the
active send service centre.
Version 4, 16.09.2005
¤ Send the SMS.
47
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / sms_BRD_neutral.fm / 28.04.2010
Sending SMS (text messages)
Receiving SMS on a PABX
u You can only receive an SMS when Call-
Version 4, 16.09.2005
ing Line Identification is forwarded to
the extension of the PABX (CLIP). The
CLIP evaluation of the SMS centre
number is completed in your Gigaset.
u Depending on your PABX, you may have
to add the access code (external line prefix) before the number of the SMS centre.
If in doubt, test your PABX, e.g., by sending an SMS to your own number: once
with and once without the access code.
u When you send SMS messages, your
sender number may be sent without your
extension number. In this case the recipient cannot reply to you directly.
Sending and receiving SMS messages on
ISDN PABXs is only possible via the MSN
number assigned to your base.
48
Activating/deactivating SMS
function
If you deactivate the SMS function, you cannot send or receive any SMS messages with
your phone.
The settings you have made for sending and
receiving SMS messages (e.g., the numbers
of the SMS centres) and the entries in the
incoming and draft message lists are saved
even after deactivation.
v
Open the main menu.
*#Q5# 2 L
Enter the digits.
Q §OK§ Deactivate the SMS function.
or:
§OK§ Activate the SMS function
(default setting).
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / sms_BRD_neutral.fm / 28.04.2010
Sending SMS (text messages)
SMS troubleshooting
You have stopped receiving SMS messages.
Error codes when sending
1. You have changed the ID of your mailbox.
Give your SMS contacts your new ID or
undo the change (
page 46).
E0 Calling Line Identification permanently
restricted (CLIR) or Calling Line Identification
not activated.
2. You have not activated your mailbox.
Activate your mailbox (
page 46).
¥
FE Error occurred during SMS transfer.
FD Connection to SMS centre failed; see selfhelp.
Self-help with errors
You cannot send messages.
1. You have not requested the CLIP service (Calling Line Identification Presentation).
Ask your service provider to enable this
service.
¥
2. SMS transmission has been interrupted (e.g.,
by a call).
Re-send the SMS.
¥
3. The network provider does not support this
feature.
4. No number or an invalid number is entered for
the SMS centre set as the active send service
centre.
Enter the number (
page 47).
¢
You receive an incomplete SMS.
¥
¢ page 43).
1. Your phone's memory is full.
Delete old SMS messages (
2. The service provider has not yet sent the rest
of the SMS.
Version 4, 16.09.2005
¥
¢
3. Call divert (redirecting) is set to When: Immediately or Immediately is activated for the
network mailbox.
Change the call divert settings
(
page 34).
¥
¢
The SMS is played back.
The following table lists problem situations
and possible causes and provides advice on
troubleshooting.
¥
¢
1. The "display call number" feature is not activated.
Ask your service provider to activate this
function (chargeable).
¥
2. No agreement is in place between your
mobile phone operator and your fixed line
network SMS service provider.
Obtain information from your fixed line
network SMS service provider.
¥
3. Your terminal has been recorded by your SMS
provider as having no fixed line network SMS
functionality, i.e., you are not registered with
the provider.
Send any SMS to automatically register
your telephone to receive SMS.
¥
Messages are only received during the day.
The terminal is recorded in your SMS provider's database as having no fixed line network SMS functionality, i.e., you are not registered with the provider.
Obtain information from your fixed line
network SMS service provider.
Send any SMS to automatically register
your telephone to receive SMS.
¥
¥
49
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / answering_m.fm / 28.04.2010
Operating the Gigaset SL400A base answering machine
Operating the
Gigaset SL400A base
answering machine
You can access the answering machine via
the handset or by remote operation (from
another telephone/mobile phone). You can
record your own announcement message or
advisory message via the handset.
Answering machine mode
You can use the answering machine in two
different modes.
u In Answer & Record mode, the caller
hears the announcement and can then
leave a message.
u In Answer only mode, the caller hears
your announcement but cannot leave a
message.
Operating via the handset
The handset loudspeaker activates automatically if you receive an acoustic prompt
or message while operating. You can switch
it off with handsfree key d.
Version 4, 16.09.2005
Activating/deactivating and
setting answering machine mode
You can choose between Answer & Record,
Answer only and Alternating. By using the
Alternating setting, you can activate answer
and record mode for a set period of time,
outside this period the caller will only hear
the announcement.
v ¢ Ì ¢ Activation (μ= on)
§Edit§
Press the display key.
¤ You can enter data in the following fields:
Activation:
Select On or Off to activate/deactivate
the answering machine.
• Mode:
Select Answer & Record, Answer only or
Alternating.
50
If Alternating mode is selected:
Record from:
Enter hours/minutes for the start of
the period in 4-digit format.
(The time must be set on the phone
beforehand.)
Record to:
Enter hours/minutes for the end of the
period in 4-digit format.
If answer & record is not set, answer only
mode applies.
§Save§
Press the display key.
If the messages memory is full and
Activation: On has been selected, saving is
interrupted and you will receive an instruction to delete old messages.
When you switch the answering machine
on, the remaining memory time is
announced. If the time has not yet been set,
an appropriate announcement is made (set
time ¢ page 16). The à icon appears in
the display.
The phone is supplied with pre-recorded
announcements for answer and record
mode and for answer only mode. If a personal announcement has not been
recorded, the relevant pre-recorded
announcement is used.
Recording announcements/
• advisory messages
v ¢ Ì ¢ Announcements ¢ Record
Announcem. / Record Adv. Msg.
§OK§
Press the display key to start the
recording.
You hear the ready tone (short tone).
¤ Now speak your announcement (at least
3 secs.).
§End§
Press the display key to end the
recording.
Cancel recording with a or §Back§. Restart
the recording with §OK§.
After recording, the announcement is
played back for you to check. You can rerecord the announcement with §New§.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / answering_m.fm / 28.04.2010
Operating the Gigaset SL400A base answering machine
Please note:
u Recording ends automatically if the max-
imum recording time of 170 seconds is
exceeded or there is a break in speech for
more than 2 seconds.
u If you cancel the recording, the prerecorded announcement is used again.
u If the answering machine's memory is
full, it will switch to Answer only mode.
¤ Delete old messages and the answering machine will automatically switch
back to Answer & Record mode.
Repeat recording if required.
Playing back announcements/
• advisory messages
v ¢ Ì ¢ Announcements
¢ Play Announcement / Play Advisory
Msg.
If you have not recorded a personal
announcement, the relevant pre-recorded
announcement is played.
Record a new announcement while playing
back the announcement:
§New§
Press the display key.
If the answering machine's memory is full, it
will switch to Answer only mode.
¤ Delete old messages and the answering
machine will automatically switch back
to Answer & Record mode. Repeat
recording if required.
Deleting announcements/
• advisory messages
Version 4, 16.09.2005
v ¢ Ì ¢ Announcements
¢ Delete Announcem. / Delete Adv. Msg.
§Yes§
Press the display key to confirm
the prompt.
Once you have deleted your announcement,
the relevant pre-recorded announcement
will be used again.
Playing back messages
The date and time of each message is logged
(provided this has been set, ¢ page 16) and
displayed during the playback. If Calling Line
Identification is activated, the caller's
number is displayed. If the caller's number is
saved in the directory, their name is displayed.
Playing back new messages
New messages that have not yet been
played back are indicated on the display
with an icon and number:
Ã
02
The f key on the handset flashes.
f
Press the message key.
Answer. Mach.:
Select and press §OK§.
If there are new messages, playback then
begins with the first new message. After the
last new message, you will hear the end tone
and an announcement stating how much
recording time remains.
If the message has been saved with the date
and time, you will hear an appropriate
announcement before playback begins.
After the entry time and date have been
played back (after approx. 3 seconds), a new
message assumes the status "old".
Playing back old messages
You can listen to old messages if there are no
more new messages. Begin playback as
described under "Playing back new messages".
Please note
Deleting announcements can take some
time.
51
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / answering_m.fm / 28.04.2010
Operating the Gigaset SL400A base answering machine
Stopping and controlling playback
During message playback:
2
Pause playback. Press 2
again to resume.
or
§Options§
Open menu.
Select Pause and press §OK§.
To continue select Continue
and press §OK§.
t or Go to the start of the current
message.
Press twice to go back to the
previous message.
s or 3
Go to the next message.
Press twice to skip ahead two
messages.
4
Skip back 5 seconds in the current message.
(Skip back function
prerequisite: more than five seconds of the current message
have been played back).
If playback is interrupted for over a minute,
the answering machine returns to idle status.
Copying a phone number from a
message to the directory
During playback or pause:
§Options§ ¢ Copy to Directory
¤ Complete the entry (¢ page 37).
Please note
Message playback can also be started via
the menu:
v ¢ Ì ¢ Play Messages
Deleting messages
You can either delete all old messages
together or individually.
Deleting all old messages
During playback or pause:
§Options§ ¢ Delete Old List
§OK§
Press the display key to confirm
the prompt.
§Yes§
Press the display key to confirm
the prompt.
Deleting individual old messages
During playback or pause:
§Delete§
Press the display key.
Version 4, 16.09.2005
Marking a message as "new"
A previously played back "old" message is
displayed as a "new" message again.
During message playback:
*
Press the star key.
or:
§Options§
Open menu.
Mark as New
Select and press §OK§.
An announcement informs you of the message's new status.
Playback of the current message is cancelled. Playback of next message starts, if
applicable.
The f key on the handset flashes.
52
Picking up a call from the
answering machine
You can pick up a call while the answering
machine is recording or is being operated
remotely:
c / §Accept§
Press the talk or display key.
Recording stops and you can speak to the
caller.
If two seconds of the call have already been
recorded when you pick it up, the call is displayed as a new message. The f key on
the handset flashes.
You can answer the call, even if it is not signalled on the handset.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / answering_m.fm / 28.04.2010
Operating the Gigaset SL400A base answering machine
Diverting an external call to the
answering machine
You can divert an incoming external call to
the answering machine, even if it is deactivated.
Prerequisite: sufficient memory space is
available on the answering machine.
An external call is signalled on the handset:
Ô
Select display key.
The answering machine starts immediately
in answer & record mode and records the
call. The set time for ring delay (¢ page 53)
is ignored.
Activating/deactivating two-way
record
Version 4, 16.09.2005
You can record an external call with the
answering machine.
¤ Inform the caller that the call is being
recorded.
§Options§
Open menu.
Two-Way Record
Select and press §OK§.
Two-way record is indicated on the display
by an advisory text and is added to the
answering machine list as a new message.
§End§
Press the display key to stop
two-way record.
The maximum recording time depends on
the memory available on the answering
machine. If the memory is full, you will hear
an end tone, the recording is aborted, and
the call recorded up to that point is listed in
the answering machine list as a new message.
• Activating/deactivating
call screening
During recording of a message, you can
screen a call via the loudspeaker of registered handsets.
Permanently activating/deactivating
call screening
v ¢ Ì ¢ Call Screening (³= on)
§Change§
Select display key to activate/
deactivate the function.
Deactivating call screening for the
current recording
You can deactivate the function for your
own handset during the recording.
§Silence§
Press the display key.
• Setting the recording
parameters
The answering machine has already been
preset at the factory. Individual settings can
be adjusted using the handset.
v ¢ Ì ¢ Recordings
¤ You can enter data in the following fields:
Length:
Maximum recording time, select 1 min.,
2 min., 3 min. or Maximum.
Quality:
Select Long Play or Excellent recording
quality. If the quality is higher, the maximum recording time is reduced.
Ring Delay:
Select when the answering machine
should accept a call:
Immediately, after 10 sec., 18 sec.,
30 sec. or Automatic.
§Save§
Press the display key.
53
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / answering_m.fm / 28.04.2010
Operating the Gigaset SL400A base answering machine
Information about ring delay
In Automatic mode, the following applies
for ring delay:
u If there are no new messages, the answering machine answers a call after 18 seconds.
u If there are new messages, the answering
machine answers a call after 10 seconds.
When operating remotely (¢ page 54), you
can tell after approx. 15 seconds that there
are no new messages (otherwise the
answering machine would have already
accepted your call). There are no call charges
if you hang up now.
Please note:
You can configure your telephone so that
the first ring is suppressed on all calls
(¢ page 43). This means that the time
selected for the ring delay predetermines
how long the caller must wait before the
answering machine accepts the call.
• Resetting fast access
for the answering machine
using key 1
Version 4, 16.09.2005
By default, key has been assigned for
fast access to the integrated answering
machine. However, if you have set the network mailbox for fast access (¢ page 56),
you can reset this setting.
v ¢ Ì ¢ Set Key 1
Answer Machine
Select and press §OK§.
Once you have selected the answering
machine, press and hold key . You are
connected directly.
The setting for fast access applies to all registered handsets.
54
Operating when on the move
(remote operation)
You can check and activate your answering
machine from any other telephone (hotel,
pay phone etc.), or initiate ringback from the
answering machine with an SMS.
Prerequisites:
u You have set a system PIN other than
0000 (¢ page 75).
u The phone you are using for remote oper-
ation has tone dialling (DTMF), i.e., you
hear different tones when you press the
keys. Alternatively, you can use a code
transmitter (available from your mobile
phone retailer).
Calling the answering machine and
playing back messages
~
9~
Dial your own number.
When you hear your announcement, press 9 and enter the
system PIN.
You are informed whether any new messages have been recorded. The messages are
now played back. You can now operate the
answering machine with the keypad.
The following keys are used for operation:
A
To return to the start of the current message.
Press twice to go back to the
previous message.
B
Stop playback. Press again to
resume.
3
Go to the next message.
D
Skip back five seconds in the
current message.
(Skip back function
prerequisite: more than five seconds of the current message
have been played back).
0
Delete current message.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / answering_m.fm / 28.04.2010
Operating the Gigaset SL400A base answering machine
Activating the answering machine
¤ Phone home and let the phone ring until
you hear: "Please enter PIN".
~
Enter system PIN.
Your answering machine is activated. It tells
you how much memory time is left.
Version 4, 16.09.2005
The messages are now played back.
The answering machine cannot be deactivated remotely.
Initiating ringback from the
answering machine with SMS and
listening to messages
Prerequisite: You must have stored an SMS
notification number (¢ page 45).
You can use the telephone (mobile phone or
any other device with SMS functionality) for
which you have stored the notification
number in your phone to send an SMS to
your answering machine when you are away
from home. It will then call you back. The
message playback begins when you accept
the call and press any digit key.
The SMS must contain the following:
*<System PIN>*<Ringback number>*
The ringback number is optional.
Examples:
*4711* or *4711*089123456*
If a ringback number is entered, it is dialled;
otherwise the SMS notification number is
dialled.
You can now operate the answering
machine via the keypad, as described in the
previous sections.
55
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / T-NetBox_SAG.fm / 28.04.2010
Using the network mailbox
Using the network
mailbox
The network mailbox is your network provider's answering machine within the network. Ask your network provider about this.
You cannot use the network mailbox unless
you have requested it from your network
provider.
• Configuring fast access
for the network mailbox
With fast access, you can dial the network
mailbox or the integrated answering
machine (Gigaset SL400A only) directly by
pressing and holding key .
Gigaset SL400: Fast access is preset for the
network mailbox. You only need to enter the
number of the network mailbox.
Gigaset SL400A: Fast access is preset for the
integrated answering machine. You can configure the network mailbox instead.
Entering network mailbox number
v ¢ Ì ¢ Network Mailbox
~
§Save§
Enter the number for the network mailbox.
Press the display key.
Select key 1 for the network mailbox
(Gigaset SL400A only)
v ¢ Ì ¢ Set Key 1
Version 4, 16.09.2005
Network Mailbox
Select Network Mailbox and
press §Select§ (Ø = selected).
The fast access settings apply to all registered Gigaset handsets.
56
Calling the network mailbox
d
Press and hold. You are connected straight to the network
mailbox.
Press handsfree key d if
required. You hear the network
mailbox announcement.
Please note
You can also connect to the network
mailbox via the menu:
v ¢ Ì ¢ Play Messages
Viewing the network mailbox
message
When a message is recorded, you receive a
call from the network mailbox. If you have
requested Calling Line Identification, the
network mailbox number is displayed. If you
accept the call, the new messages are played
back. If you do not accept the call, the network mailbox number is saved in the missed
calls list and the message key flashes
(¢ page 40).
Please note
Enter the network mailbox phone
number into your directory along with
the designation "Network mailbox"; the
display and the call list will then show
this designation.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
ECO DECT
ECO DECT
You are helping to protect the environment
with your Gigaset SL400/SL400A.
Reducing energy consumption
Your telephone has a power-saving adapter
plug and uses less power.
Reducing radiation
The radiation from your telephone is
reduced automatically:
u The closer the handset is to the base, the
lower the radiation.
You can further reduce the radiation from
the handset and base by using Eco Mode:
Eco Mode
Reduces radiation from the base and handset by 80% – whether you are making a call
or not. Eco Mode reduces the range of the
base by approx. 50%. Using Eco Mode
always makes sense when a reduced range is
sufficient.
Status displays
Display icon
Ð i Ñ Ò
| (flashes)
Ð white
Ð green
¼ white
¼ green
Eco Mode / Eco Mode+
Activate/deactivate:
Version 4, 16.09.2005
v ¢ Ï ¢ Eco Mode
¢ Eco Mode / Eco Mode+
§Change§
Press the display key (³ = on).
Eco Mode deactivated
Eco Mode activated
Eco Mode+ activated
(displays instead of the
reception strength icon
when in idle status)
Eco Mode and Eco
Mode+ activated
Please note
u When using Eco Mode+, you can
u
Switching off radiation
Eco Mode+
If you activate Eco Mode+, radiation (DECT
transmission power) from the base and
handset is deactivated in idle status. This is
also true when multiple handsets are used,
provided the handsets support Eco Mode+.
Eco Mode / Eco Mode+ can be activated/
deactivated independently of one another
and can also be used with multiple handsets.
Reception strength:
– good to poor
– no reception
u
u
u
ensure that the range of the base is
sufficient by pressing and holding
the talk key c. You hear the ringtone if the base can be reached.
When Eco Mode+ is activated:
– Call setup is delayed by approx.
2 seconds.
– Handset standby time is reduced
by approx. 50%.
Registering handsets that do not support Eco Mode+ causes the mode to
be deactivated on the base and all
other handsets.
Activating Eco Mode reduces the
range of the base.
Eco Mode / Eco Mode+ and repeater
support (¢ page 74) cancel each
other out, i.e., if you use a repeater,
you cannot use Eco Mode or Eco
Mode+.
57
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Setting an appointment (calendar)
Setting an appointment
(calendar)
You can use your handset to remind yourself
of up to 30 appointments. Anniversaries
(¢ page 38) entered in the directory are
automatically recorded in the calendar.
Saving an appointment.
Prerequisite: The date and time have
already been set (¢ page 16).
v ¢ Í ¢ Calendar
April 2010
Mo
Tu
We
Th
Fr
Sa
Su
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Back
OK
¤ You can enter data in the following fields:
Activation:
Select On or Off.
Date:
Enter day/month/year in 8-digit format.
Time:
Enter hours/minutes in 4-digit format.
Text:
Enter text (max. of 16 characters). The
text appears as the appointment name in
the list and is displayed on the screen
during the appointment reminder. If you
do not enter any text, only the date and
time of the appointment are displayed.
Signal:
Select the reminder type.
§Save§
Please note
If you have already saved thirty appointments, you will have to first delete an
existing appointment before adding a
new one.
u The current day is selected (highlighted).
u Days on which appointments have
Signalling appointments and
anniversaries
already been saved are highlighted.
r/q
Select the required day in the
graphical calendar.
The selected day is highlighted. The current
day is highlighted in the same colour as the
digits.
w
Press the centre of the control
key.
u If appointments have already been
entered, this will open the list of saved
appointments on that day.
Select <New Entry> ¢ §OK§ to open the
data input window.
u If no appointments have been entered,
the data input window will open immediately to add the new appointment.
An appointment reminder is signalled in idle
status for 60 seconds with the selected ringtone at the volume that has been set for
internal calls (¢ page 71).
The name is displayed for anniversaries,
while the entered text is displayed for
appointments along with the time.
ØáÚ
Meeting
15:38
Off
Version 4, 16.09.2005
Press the display key.
58
SMS
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Setting an appointment (calendar)
You can either deactivate or answer an
appointment reminder:
§§Off§§
Press the display key to deactivate the appointment reminder.
or:
§SMS§
Press the display key to respond
to the appointment reminder
with an SMS.
Please note
During a call, the appointment reminder
is signalled by a short tone.
Managing appointments
v ¢ Í ¢ Calendar
Editing individual appointments
r/ q
Select a day in the graphical calendar on which an appointment
has already been saved (digits
highlighted) and press control
key w.
q
Select appointment for the day.
You have the following options:
§§View§§
Press the display key and edit or
confirm the entry.
or
§Options§
Open the menu for editing,
deleting and activating/deactivating.
Deleting all appointments for one day
¢ Delete all Appoints. ¢ §OK§
Confirm the security prompt with §Yes§.
All appointments are deleted.
Version 4, 16.09.2005
§Options§
Displaying missed
appointments, anniversaries
Missed appointments/anniversaries
(¢ page 38) are displayed in the Missed
Alarms list if:
u You do not accept an appointment/anniversary.
u The appointment/anniversary was signalled during a phone call.
u The handset is deactivated at the time of
the appointment/anniversary.
u Automatic redial was activated at the
time of an appointment/anniversary
(¢ page 39).
The icon and the number of new entries
are shown in the display. The most recent
entry is at the head of the list.
Open the list by pressing the message key
f (¢ page 40) or via the menu:
v ¢ Í ¢ Missed Alarms
Select appointment/anniversary.
A missed appointment is displayed with the appointment
name and a missed anniversary
is displayed with the last name
and first name. The date and
time will also be given.
§Delete§
Delete appointment.
§SMS§
Write an SMS.
If 10 entries are already stored in the list, the
next appointment reminder will delete the
oldest entry.
59
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Setting the alarm clock
Setting the alarm clock
Using multiple handsets
Prerequisite: The date and time have
already been set (¢ page 16).
Registering handsets
Activating/deactivating the alarm
clock and setting the wake-up time
v ¢ á ¢ Alarm Clock
¤ You can enter data in the following fields:
Activation:
Select On or Off.
Time:
Enter the wake-up time in 4-digit format.
Occurrence:
Select Daily or Monday-Friday.
Volume:
Set the volume (1–6).
Signal:
Select melody.
§Save§
Press the display key.
In idle status, the ¼ icon and wake-up time
are displayed.
A wake-up call is signalled on the display
and with the selected ringtone (¢ page 3).
The wake-up call sounds for 60 seconds. If
no key is pressed, the wake-up call is
repeated twice at five minute intervals and
then switched off.
During a call, the wake-up call is only signalled by a short tone.
Version 4, 16.09.2005
Deactivating the wake-up call/
repeating after a pause (snooze
mode)
Prerequisite: A wake-up call is sounding.
§Off§
Press the display key. The wakeup call is deactivated.
or
§Snooze§
Press the display key or any key.
° is shown in the display... The
wake-up call is deactivated and
then repeated after 5 minutes.
After the second repetition the
wake-up call is deactivated
completely.
60
You can register up to six handsets to your
base.
A Gigaset handset can be registered on up to
four bases.
Manually registering
Gigaset handsets to the Gigaset
SL400/SL400A
You must manually register the handset on
both the handset (1) and the base (2).
Once the registration process has been completed successfully, the handset returns to
idle status. The handset's internal number is
shown in the display e.g., INT 1. If not, repeat
the procedure.
1) On the handset
The handset is not registered to a base.
§Register§
Press the display key.
The handset is already registered to a base:
v ¢ Ï ¢ Registration
¢ Register Handset
If the handset is already registered to four
bases:
s
Select base, e.g., Base 3 and
press §OK§.
~
If required, enter the system
PIN for the base and press §OK§.
A message appears stating that the handset is searching for a base that is ready for
registration.
2) On the base
¤ Within 60 seconds, press and hold the
registration/paging key on the base
(¢ page 2) (approx. 3 seconds).
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Using multiple handsets
Registering other handsets
You can register other Gigaset handsets and
handsets for other devices with GAP functionality as follows.
1) On the handset
¤ Start to register the handset as
described in its user guide.
2) On the base
¤ Press and hold the registration/paging
key on the base (¢ page 2) (approx. 3
sec.).
Deregistering handsets
You can deregister all other registered handsets from each of the registered Gigaset
handsets.
v ¢ Ï ¢ Registration
¢ De-reg. Handset
s
Select the internal subscriber
you wish to deregister and
press §OK§.
(The handset you are currently
using is highlighted with <).
~
Enter the current system PIN
and press §OK§.
§Yes§
Press the display key.
Locating a handset ("Paging")
You can locate your handset using the base.
¤ Briefly press the registration/paging key
on the base (¢ page 2).
¤ All handsets will ring simultaneously
("paging"), even if the ringtones are deactivated.
Changing the base
If your handset is registered to more than
one base, you can set it to a particular base
or to the base that has the best reception
(Best Base).
v ¢ Ï ¢ Registration ¢ Select Base
s
Select one of the registered
bases or Best Base and press
§Select§.
Making internal calls
Internal calls to other handsets registered on
the same base are free.
Calling a specific handset
u
~
or:
s
c
Initiate internal call.
Enter the number of the handset.
Select handset.
Press the talk key.
Calling all handsets ("group call")
u
or:
u
*
Press and hold.
Initiate internal call.
Press the star key.
or
Call All
Select
c
Press the talk key.
All handsets are called.
Ending a call
a
Press the end call key.
Ending paging
¤ Briefly press the registration/paging key
Version 4, 16.09.2005
on the base or press the talk key c on
the handset.
61
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Using multiple handsets
Transferring a call to another
handset
Making internal consultation/
conference calls
You can transfer an external call to another
handset (connect).
u
Open the list of handsets.
The external participant hears
music on hold, if activated
(¢ page 74).
s
Select a handset or Call All and
press §OK§.
When the internal participant answers:
¤ If necessary, announce the external call.
a
Press the end call key.
The external call is transferred to the other
handset.
If the internal participant does not answer or
the line is busy, press the display key §End§, to
return to the external call.
When transferring a call, you can also press
the end call key a before the internal participant answers.
Then, if the internal participant does not
answer or the line is busy, the call will automatically return to you.
When you are conducting an external call,
you can call an internal participant at the
same time for consultation or hold a conference call between all 3 participants.
You are conducting an external call:
u
Open the list of handsets.
The external participant hears
music on hold, if activated
(¢ page 74).
s
Select handset and press §OK§.
The internal participant is
called.
If the participant picks up, you can either:
§End§
Press the display key.
You are reconnected with the
external participant.
or:
§Conference§ Press the display key.
All 3 participants are connected
with each other.
Please note
u If only two handsets are registered,
the other handset is called immediately by pressing the u key.
u Pressing and holding the u key calls
all handsets immediately.
Ending a conference call
Version 4, 16.09.2005
a
Press the end call key.
If an internal participant presses the end call
key a, the other handset remains connected to the external participant.
62
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Using multiple handsets
Accepting/rejecting call waiting
Internal listening in
If you receive an external call during an
internal call, you will hear the call waiting
tone (short tone). With Calling Line Identification, the caller's number will appear in the
display.
The line is engaged with an external call.
Your screen will display information to that
effect. To listen in to the external call.
c
Press and hold the talk key.
You can listen in to the call. All participants
hear a signal tone. During this time, this
handset displays the Conference message
and it is not possible to dial another number
from this handset.
Ending an internal call, accepting an
external call
§Accept§
Press the display key.
The internal call is ended. You are connected
to the external caller.
Rejecting the external call
§Reject§
Press the display key.
The call waiting tone is turned off. You
remain connected with the internal participant. The ringtone can still be heard on
other registered handsets.
Listening in to an external call
Prerequisite: The Listening In function must
be activated.
You are conducting an external call. An internal participant can listen in on this call and
take part in the conversation. All the participants are made aware of additional listeners
by a signal tone.
• Activating/deactivating
listening in
v ¢ Ï ¢ Telephony ¢ Listening In
Version 4, 16.09.2005
Press §Change§ to activate/deactivate the function (³ = on).
Ending listening in
a
Press the end call key.
All participants hear a signal tone.
If the first internal participant presses the
end call key a, the handset that has "listened in" remains connected to the external
participant.
Changing the name of a
handset
The names "INT 1", "INT 2" etc. are assigned
automatically at registration. You can
change these names. The name must be no
more than 10 characters. The changed name
is displayed in every handset's list.
u
Open the list of handsets. Your
own handset is indicated by f.
s
Select handset.
§Options§
Open menu.
Rename
~
Enter name.
§Save§
Press the display key.
63
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Using a handset as a room monitor
Changing a handset's
internal number
Version 4, 16.09.2005
A handset is automatically assigned the
lowest free number when it is registered. If
all slots are occupied, number 6 is overwritten if this handset is in idle status. You can
change the internal number of all registered
handsets (1–6).
u
Open the list of handsets. Your
own handset is indicated by f.
§Options§
Open menu.
Assign Handset No.
Select and press §OK§.
r
Select number.
§Save§
Press the display key to save the
input. Only numbers that have
not yet been assigned can be
designated.
64
Using a handset as a
room monitor
If the room monitor is activated, a previously
saved destination number is called as soon
as a set noise level is reached. You can save
an internal or external number in your handset as the destination number. All of the
handset keys are deactivated, with the
exception of the display keys.
The room monitor call to an external
number is terminated after approximately
90 seconds. The room monitor call to an
internal number (handset) stops after
approx. 3 minutes (depending on the base).
When the room monitor is activated, all keys
are locked except the end call key. The handset's speaker is muted.
When the room monitor is activated, incoming calls to the handset are indicated without a ringtone and are only shown on the
screen. The display and keypad are not illuminated and advisory tones are also turned
off.
If you accept an incoming call, the room
monitor is suspended for the duration of the
call, but the function remains activated.
If you deactivate then reactivate the handset, the room monitor remains activated.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Using a handset as a room monitor
Warning!
u Always check the operation of the
room monitor before use. For example, test its sensitivity. Check the
connection if you are diverting the
room monitor to an external
number.
u When the function is switched on, the
handset's operating time is considerably reduced. If necessary, place the
handset in the charger. This ensures
that the battery does not run down.
u Ideally the handset should be positioned 1 to 2 metres away from the
baby. The microphone must be
directed towards the baby.
u The connection to which the room
monitor is diverted must not be
blocked by an activated answering
machine.
Activating the room monitor and
entering the destination number
Version 4, 16.09.2005
v ¢ É ¢ Room Monitor
¤ You can enter data in the following fields:
Activation:
Select On to activate.
Alarm to:
Select Internal or External.
External number: Select the number
from the directory (press display key ö)
or enter it manually.
Internal number: Select display key
§Change§ ¢ Select handset or Call All to
call all registered handsets ¢ §OK§.
In idle status, the destination number or
the internal destination number is displayed.
Sensitivity:
Select noise level sensitivity (Low or
High).
¤ Press §Save§ to save the settings.
When the room monitor function is activated,
the idle display appears as shown below:
i
Ã
V
07:15
INT 1
Á
05 Apr
Room monitor
0891234567
Off
Options
Changing the set destination
number
v ¢ É ¢ Room Monitor
¤ Enter and save number as described in
"Activating the room monitor and entering the destination number"
(¢ page 65).
Cancelling/deactivating the room
monitor
Press the end call key a to cancel the call
when the room monitor is activated.
In idle status, press the display key §Off§ to
deactivate room monitor mode.
Deactivating the room monitor
remotely
Prerequisites: The phone must support tone
dialling and the room monitor should be set
for an external destination number.
¤ Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There are no further room
monitor calls. The other room monitor settings on the handset (e.g., no ringtone) will
remain activated until you press the display
key §Off§ on the handset.
To reactivate the room function with the
same phone number:
¤ Reactivate and save with §Save§
(¢ page 65).
65
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Using Bluetooth devices
Using Bluetooth devices
Your Gigaset handset can communicate
wirelessly via Bluetooth™ with other devices
using this technology.
Before you can use your Bluetooth device,
activate Bluetooth, ensure the devices are
visible and then register the handset.
You can register one Bluetooth headset to
the handset. You can also register up to five
data devices (PCs, PDAs and mobile phones)
to send and receive directory entries as
vCards or exchange data with the computer
(¢ page 85).
To use the phone numbers, dialling codes
(country and area code) must be stored in
the directory (¢ page 74).
You will find a description of how to operate
your Bluetooth devices in the user guides for
these devices.
Please note
u You can operate headsets on your
handset that have the headset or
handsfree profile. If both profiles are
available, the handsfree profile is used
to communicate.
u It can take up to five seconds to establish a connection between your handset and a Bluetooth headset. This
applies both when a call is accepted
using the headset or transferred to the
headset, and when a number is
dialled from the headset.
Activating/deactivating Bluetooth
mode
Version 4, 16.09.2005
v ¢ ò ¢ Activation
Press §Change§ to activate or deactivate Bluetooth mode (³ = activated).
In idle status, the ò icon on the handset
shows that Bluetooth mode is activated
(¢ page 3).
66
Registering Bluetooth devices
The distance between the handset in Bluetooth mode and the activated Bluetooth
device (headset or data device) should be no
more than 10 m.
Please note
u If you register a headset, any headset
that is already registered will be overwritten.
u If you would like to use a headset with
your handset that is already registered to another device (e.g., to a
mobile phone), please deactivate this
connection before you start the registration process.
v ¢ ò ¢ Search for Headset / Search
Data Device
The search can take up to 30 seconds.
Once the device has been found, its name is
shown on the display.
§Options§
Press the display key.
Trust Device
Select and press §OK§.
~
Enter the PIN for the Bluetooth
device you want to register and
press §OK§.
The device is saved in the list of known
devices.
Cancelling/repeating current search
To cancel search:
§Cancel§
Press the display key.
Repeat search if necessary:
§Options§
Press the display key.
Repeat Search
Select and press §OK§.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Using Bluetooth devices
Editing the list of known (trusted)
devices
Rejecting/accepting an
unregistered Bluetooth device
Open list
If a Bluetooth device that is not registered in
the list of known devices tries to connect
with the handset, you will be prompted on
the display to enter the PIN for the Bluetooth
device (bonding).
u Reject
a
Briefly press the end call key.
u Accept
~
Enter the PIN for the Bluetooth
device you want to accept and
press §OK§.
If you have accepted the device, you can
use it temporarily (i.e., as long as it is
within receiving range or until you deactivate the handset) or save it to the list of
known devices.
Once the device's PIN has been confirmed
– Save to the list of known devices: press
display key §Yes§.
– Use temporarily: press display key §No§.
v ¢ ò ¢ Known Devices
A corresponding icon appears next to each
device name in the list displayed:
Icon
ô
õ
Meaning
Bluetooth headset
Bluetooth data device
If a device is connected, the corresponding
icon is shown in the header of the display
instead of ò.
Viewing entries
Open list ¢ s (select entry)
§Options§
Press the display key.
View Entry Select and press §OK§.
Device name and address are
displayed.
Go back with §OK§.
Deregistering Bluetooth devices
Open list ¢ s (select entry)
§Options§
Press the display key.
Delete Entry
Select and press §OK§.
Please note
If you deregister an activated Bluetooth
device, it may try to reconnect as an
"unregistered device".
Changing the Bluetooth name of
the handset
You can change the handset name used to
identify it on the display of another Bluetooth device.
v ¢ ò ¢ Own Device
§Change§
Press the display key
~
Change the name.
§Save§
Press the display key
Changing the name of a Bluetooth
device
Version 4, 16.09.2005
Open list ¢ s (select entry)
§Options§
Press the display key.
Edit Name Select and press §OK§.
~
Change the name.
§Save§
Press the display key
67
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Defining handset settings
Defining handset
settings
When the handset is in idle status
¤ Press and hold the digit key:
The number is dialled immediately.
or
Your handset is preconfigured, but you can
change the settings to suit your individual
requirements.
Quick dialling numbers and
functions
You can assign a number from the directory
to each of the digit keys Q and 2 to
O.
The left and right display keys have a default
function. You can change the assignment
(¢ page 68).
The number is then dialled or the function
started by simply pressing a key.
Assigning digit keys
Prerequisite: the digit key has not yet been
assigned a number and there is at least one
entry in the directory.
¤ Press and hold the digit key
or
Press the digit key briefly and press the
display key §QuickDial§.
The directory opens.
¤ Select an entry and press §OK§.
The entry is saved to the corresponding digit
key.
Please note
If you delete or edit the entry in the directory at a later date, this will not affect the
assignment to the number key.
Selecting numbers/changing an
assignment
Version 4, 16.09.2005
Prerequisite: The digit key already has a
number assigned to it.
68
¤ Briefly press the digit key.
Press the display key with the number/
name (abbreviated if necessary) to select
the number or
Press display key §Change§ to change the
digit assignment or press display key
§Clear Key§ to delete the assignment.
Changing display key assignments
¤ Press and hold the left or right side of the
display key.
The list of possible key assignments is
opened. The following can be selected:
Room Monitor
Assign menu for setting and activating
the room monitor to a key (¢ page 64).
Alarm Clock
Assign menu for setting and activating
the alarm clock to a key (¢ page 60).
Calendar
Display graphical calendar (¢ page 58).
Bluetooth
Assign the Bluetooth menu to a key
(¢ page 66).
Redial
Display the redial list.
More Functions...
More features are available:
Call Lists
Display call lists (¢ page 39).
INT
Internal calls (¢ page 61).
SMS
Assign menu for SMS functions to a
key (¢ page 42).
Withhold Number
Restrict Calling Line Identification for
the next call (¢ page 33).
¤ Select an entry and press §OK§.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Defining handset settings
Changing the display
language
You can view the display texts in different
languages.
v ¢ Ï ¢ Language
The current language is indicated by a Ø.
s
Select language and press
§Select§.
If you accidentally choose a language you do
not understand:
v ¢Ï¢ s¢ s¢ s
Press keys in sequence and confirm by selecting §OK§.
s
Select the correct language and
press the right display key.
Setting the display
Setting the screensaver/slide show
Version 4, 16.09.2005
When in idle status, a picture or a slide show
(all the pictures are displayed one after the
other) from the Screensaver folder of the
Resource Directory (¢ page 72) or the
time can be displayed as a screensaver. This
will replace the idle status display.
The screensaver is not displayed in certain
situations, e.g., during a call or if the handset
is deregistered.
If a screensaver is activated, the Screensaver
menu option is marked with μ.
v ¢ Ï ¢ Display + Keypad
¢ Screensaver
The current setting is displayed.
¤ You can enter data in the following fields:
Activation:
Select On (screensaver is displayed) or
Off (no screensaver).
Selection:
Select screensaver or
§View§
Press the display key. The active
screensaver is displayed.
s
Select screensaver and press
§OK§.
§Save§
Press the display key.
Briefly press the end call key a to return
to the idle display.
Please note
If the analogue clock has been set as the
screensaver, the second hand is shown
only when the handset is in the base.
Setting large font
You can increase the font size of print and
symbols in call lists and the directory to
improve readability. Only one entry is shown
at a time on the display instead of several
entries and names are abbreviated if necessary.
v ¢ Ï ¢ Display + Keypad
¢ Large Font
§Change§
Press display key (³= on).
Setting the colour scheme
You can set the display to be shown in various colour combinations.
v ¢ Ï ¢ Display + Keypad
¢ Colour Schemes
Select Colour Scheme (1 to 5) and press
§Select§.
69
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Defining handset settings
•
Setting the display backlight
Depending on whether or not the handset is
in the charger, you can activate or deactivate
the backlight. If it is activated, the display is
permanently dimmed.
If the display backlight is deactivated, it can
be reactivated by pressing any key. Digit
keys appear on the display for pre-dialling;
all other keys do not have any further functions.
v ¢ Ï ¢ Display + Keypad
¢ Display Backlight
The current setting is displayed.
¤ You can enter data in the following fields:
In Charger
Select On or Off.
Out of Charger
Select On or Off.
Please note
With the On setting, the standby time
of the handset can be significantly
reduced.
§Save§
Press the display key.
Setting keypad illumination
Version 4, 16.09.2005
The brightness of the keypad illumination
can be set to one of five levels.
v ¢ Ï ¢ Display + Keypad
¢ Keypad Illumination
The current setting is displayed.
¤ You can enter data in the following fields:
Intensity:
Select 1 (darkest) to 5 (brightest).
§Save§
Press the display key.
70
• Activating/deactivating
auto answer
If this function is activated, you can simply
lift the handset out of the charger without
having to press the talk key c when you
receive a call.
v ¢ Ï ¢ Telephony ¢ Auto Answer
§Change§
Press display key (³= on).
Changing the handsfree/
earpiece volume
You can set the loudspeaker volume for
handsfree mode and the earpiece volume to
five different levels.
In idle status:
t
Open the menu for setting the
call volume.
r
Set the earpiece volume.
s
Scroll to the Speaker line.
r
Set the handsfree volume.
§Save§
Press the display key to save the
setting.
During a conversation via the earpiece or in
handsfree mode:
t
Press the control key to call up
the Handset Volume menu. Set
the earpiece or handsfree volume by pressing r.
The setting will automatically be saved after
approximately 3 seconds, if not then press
the display key §Save§.
If t is assigned to another function, e.g., call
swap (¢ page 34):
§Options§
Open menu.
Volume
Select and press §OK§.
Configure setting (see above).
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Defining handset settings
Please note
u The settings for the earpiece also
apply to a connected headset.
u You can also set the call volume using
the menu (¢ page 28).
Setting a handsfree profile
In idle status, you can set various handsfree
profiles to optimally adapt your phone to
your environment.
Profile 1
The optimum setting for most connections and set as default.
Profile 2
Optimum volume in handsfree mode.
However, this means that the participants
cannot speak at the same time as the person speaking is given preferential transmission (making two-way conversations
difficult).
Profile 3
Optimises two-way conversations, both
callers can hear each other, even if they
talk at the same time.
Profile 4
Optimised for special connections. If the
default setting (profile 1) does not provide optimum sound, please give this a
try.
v ¢ Ï ¢ Audio Settings
¢ Handsfree Profiles
Select handsfree profile (1 to 4) and press
§Select§.
Changing ringtones
u Volume:
Version 4, 16.09.2005
You can choose between five volumes (1–
5; e.g., volume 3 = Š) and the "crescendo" ringtone (6; volume increases
with each ring = ‡).
u Ringtones:
You can select a ringtone from a list of
pre-loaded melodies.
You can select various ringtones, melodies or any sound from the resource
directory (¢ page 72).
You can set different ringtones for the following functions:
u Internal Calls
u External Calls
Setting volume/melodies
In idle status:
v ¢ Ï ¢ Audio Settings
¢ Ringtones (H/Set)
¢ Volume/Melodies
r
Set the volume for internal calls
and appointments or melody
for internal calls.
s
Scroll to the next line.
r
Setting volumes/melodies for
external calls.
§Save§
Press the display key to save the
setting.
•
For external calls, you can also:
Specify a time period when you do not want
the telephone to ring, e.g., during the night.
v ¢ Ï ¢ Audio Settings
¢ Ringtones (H/Set) ¢ Time Control
Time Control:
Select On or Off.
If time control is activated:
Suspend ring. from:
Enter the start of the period in 4-digit format.
Suspend ring. until:
Enter the end of the period in 4-digit format.
Please note
During this period, you will continue to
receive calls from numbers to which you
have assigned a personalised melody in
the directory (VIP).
71
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Defining handset settings
Activating/deactivating the
ringtone for unknown calls
Activating/deactivating the alert
tone
You can set your phone not to ring for calls
where Calling Line Identification has been
restricted. The call will only be signalled on
the display.
In idle status:
v ¢ Ï ¢ Audio Settings
¢ Ringtones (H/Set) ¢ Anon. Call Silenc.
Press §Change§ to activate or deactivate the
function (³= on).
In place of the ringtone, you can activate an
alert tone. When you receive a call, you will
hear a short tone ("Beep") instead of the
ringtone.
*
Press and hold the star key and
within 3 seconds:
§Beep§
Press the display key. A call will
now be signalled by one short
alert tone.
ñ appears in the display.
Silent alert
Incoming calls and other messages are indicated by a silent alert.
In idle status:
v ¢ Ï ¢ Audio Settings
¢ Silent Alert
Press §Change§ to activate or deactivate the
silent alert (³= on).
Activating/deactivating the
ringtone/silent alert
You can
u Permanently deactivate the ringtone in
idle status or when receiving a call
u Deactivate the ringtone and silent alert
for the current call
The ringtone cannot be re-activated while a
call is in progress.
Deactivating the ringtone
permanently
*
Press and hold the star key.
The ó icon appears in the display.
Reactivating the ringtone
*
Press and hold the star key.
Deactivating the ringtone/silent alert
for the current call
Version 4, 16.09.2005
§Silence§
72
Press the display key.
Using the Resource Directory
The resource directory on the handset manages sounds, which you can use as ringtones, and pictures, which you can use as
caller pictures or as screensavers. Prerequisite: Calling Line Identification Presentation
(CLIP). The resource directory can manage
the following media types:
Type
Format
Sound
– Ringtones
– Imported sounds
Internal
WMA, MP3, WAV
Picture
– Caller picture
– Screensaver
BMP, JPG, GIF
128 x 86 pixels
128 x 160 pixels
Various mono and polyphonic sounds and
pictures are preconfigured on your handset.
You can listen to the available sounds and
view the pictures.
You can download pictures and sounds from
a PC (¢ page 85). If there is not enough
memory available, you must first delete one
or more pictures or sounds.
Please note
The memory for screensavers, sounds
and caller pictures is separated from the
memory for the directory.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Defining handset settings
Playing back sounds/viewing caller
pictures
v ¢ É ¢ Resource Directory
¢ Screensavers / Caller Pictures /
Sounds (select entry)
Pictures:
§View§
Press the display key. The
selected picture is displayed.
Switch between pictures using
the q key.
If you have saved a picture in an invalid file
format, you will see an error message after
selecting the entry.
Sounds:
The selected sound is played back immediately. Switch between the sounds using the
q key.
You can set the volume during playback.
§Options§
Open menu.
Volume
Select and press §OK§.
r
Set volume.
§Save§
Press the display key.
Deleting/renaming a picture/
sound
You have selected an entry.
§Options§
Open menu.
You can select the following functions:
Delete Entry
The selected entry is deleted.
Rename
Change the name (max. 16 characters)
and press §Save§. The entry is stored with
the new name.
• Activating/deactivating
advisory tones
Your handset uses advisory tones to tell you
about different activities and statuses. The
following advisory tones can be activated/
deactivated independently of each other:
u Key tones: every key press is confirmed.
u Acknowledge tones:
– Confirmation tone: at the end of an
entry/setting and when an SMS or a
new entry arrives in the answering
machine list or call list
– Error tone: when you make an incorrect entry
– Menu end tone: when scrolling to the
end of a menu
u Battery: the battery needs charging.
In idle status:
v ¢ Ï ¢ Audio Settings ¢ Advisory
Tones
¤ You can enter data in the following fields:
Key Tones:
Select On or Off.
Confirmation:
Select On or Off.
Battery:
Select On or Off.
§Save§
Press the display key.
Version 4, 16.09.2005
Checking the memory capacity
You can check how much memory is available for screensavers, sounds and caller pictures.
v ¢ É ¢ Resource Directory
¢ Capacity
73
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
Setting the base
• Setting your own area
Setting the base
code
To transfer phone numbers (e.g., in vCards),
it is essential that your area code (international and local area code) is saved on the
phone.
Some of these numbers are already preset.
v ¢ Ï ¢ Telephony ¢ Area Codes
Check that the (pre)set area code is correct.
¤ You can enter data in the following fields:
q
Select/change input field.
r
Navigate in the input field.
Ñ
If necessary, delete number:
press the display key.
~
Enter number.
Press the display key.
§Save§
Example:
Area Codes
International Code:
00 - 44
Local Area Code:
0-[
Û
]
Save
• Restoring the handset
Version 4, 16.09.2005
default settings
You can reset individual settings and
changes that you have made.
The following settings are not affected by a
reset:
u Registration of the handset to the base
u Date and time
u Entries in the calendar
u Entries in the directory, SMS lists and the
contents of the resource directory
v ¢ Ï ¢ System ¢ Handset Reset
§Yes§
Press the display key.
74
The base settings are carried out using a registered Gigaset handset.
• Activating/deactivating
music on hold
v ¢ Ï ¢ Audio Settings
¢ Music on Hold
Press §Change§ to activate or deactivate the
music on hold (³ = on).
• Activating repeater
support
With a repeater, you can increase the range
and signal strength of your base. You will
need to activate repeater mode. This will terminate any calls that are in progress at the
time.
Prerequisite: A repeater is registered.
v ¢ Ï ¢ System ¢ Repeater Mode
Press §Change§ to activate/deactivate repeater
mode (³ = activated).
Switch your handset off and on again
(¢ page 22), once the repeater has
been activated/deactivated.
Please note
¢ page 57)
and repeater support cancel each
other out, i.e., if you use a repeater,
you cannot use Eco Mode or Eco
Mode+.
u The default encrypted transmission
setting is deactivated when a
repeater is activated.
u Eco Mode / Eco Mode+ (
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / registr_sett.fm / 28.04.2010
• Protecting against
Setting the base
• Resetting the base to the
unauthorised access
default settings
Protect the base system settings with a PIN
known only to you. The system PIN must be
entered when, for example, registering/
deregistering a handset to/from the base or
when restoring the default settings.
When the settings are restored:
u Date and time are retained
u Handsets are still registered
u Eco Mode is activated and Eco Mode+ is
deactivated,
u The system PIN is not reset.
v ¢ Ï ¢ System ¢ Base Reset
~
Enter the system PIN and
press §OK§.
§Yes§
Press the display key.
Changing the system PIN
You can change the 4-digit system PIN set on
the base (default setting: 0000) to a 4-digit
PIN known only to you.
Gigaset SL400A: Setting a system PIN facilitates remote operation of the answering
machine (¢ page 54).
v ¢ Ï ¢ System ¢ System PIN
~
Enter the current system PIN
and press §OK§.
~
Enter your new system PIN and
press §OK§.
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code 0000:
Disconnect the power cable from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Hold down the key for at
least 5 seconds.
The base has now been reset and the system
PIN is set to 0000.
Please note
Version 4, 16.09.2005
All handsets are deregistered and must
be re-registered. All settings are reset to
the default settings.
75
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / pabx.fm / 28.04.2010
Connecting the base to the PABX
Connecting the base to
the PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
• Selecting dialling mode
and recall
The current setting is indicated by Ø.
Changing the dialling mode
The following dialling modes can be
selected:
u Tone dialling (DTMF)
u Pulse dialling (PD).
v ¢ Ï ¢ Telephony ¢ Dialling Mode
s
Select dialling mode and press
§Select§ (Ø = selected).
Please note
Version 4, 16.09.2005
Tone dialling (DTMF) is now the most
common dialling mode. Pulse dialling
mode (PD) is only used for a few old
PABXs.
76
Setting recall
Your phone is preset for operation on the
main connection. For operation on a PABX,
you may have to change this value. Please
refer to the user guide for your PABX.
v ¢ Ï ¢ Telephony ¢ Recall
s
Select recall and
press §Select§
(Ø = set value). Possible values
are:
80 ms, 100 ms, 120 ms, 180 ms,
250 ms, 300 ms, 400 ms, 600 ms,
800 ms.
• Saving an access code
(outside line code)
Prerequisite: You may have to enter an
access code in front of the number for external calls in your PABX, e.g., "0".
v ¢ Ï ¢ Telephony ¢ Access Code
~
Enter or change access code,
max. 3 digits.
§Save§
Press the display key.
If an access code has been saved:
u The access code is automatically prefixed
when dialling using the call lists, answering machine list and when dialling the
numbers of the SMS centres you have
entered.
u The access code must be entered when
dialling manually and when manually
entering directory, emergency/quick dial
numbers or SMS centre numbers.
u If you copy the recipient's number from
the directory when sending an SMS, you
have to delete the access code.
u An existing access code is deleted
using Ñ.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / pabx.fm / 28.04.2010
Connecting the base to the PABX
Setting pauses
Changing the pause after line
seizure
You can change the length of the pause that
is inserted between pressing the talk key
c and sending the number.
v
Open the main menu.
*#Q5#
L
Press keys.
~
Enter number for the length of
the pause (1 = 1 sec.; 2 = 3 secs.;
3 = 7 secs.) and press §OK§.
Switching temporarily to
tone dialling (DTMF)
If your PABX still operates with pulse dialling
(PD), but you need tone dialling for a connection (e.g., to listen to the network mailbox), you must switch to tone dialling for the
call.
Prerequisite: You are conducting a call or
have already dialled an external number.
*
Press the star key.
After the call ends, pulse dialling is automatically activated again.
Change pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open the main menu.
*#Q5#
2
Press keys.
~
Enter a number for the length
of the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press §OK§.
Changing a dialling pause
(pause after access code)
Prerequisite: You have saved an access code
(¢ page 76).
Version 4, 16.09.2005
v
Open the main menu.
*#Q5#
Press keys.
~
Enter number for the length of
the pause (1 = 1 sec.; 2 = 2 secs.;
3 = 3 secs.; 4 = 6 secs.) and
press §OK§.
To insert a dialling pause: press and hold
S for 2 seconds. A P appears in the display.
77
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / appendix.fm / 28.04.2010
Service (Customer Care)
Service (Customer Care)
You have questions? As a Gigaset customer, you can take advantage of our comprehensive service offerings. You can find help quickly in this User Manual and in the service pages of our
Gigaset online portal.
Please register your phone right after purchase.
Version 4, 16.09.2005
This enables us to provide you with even better service regarding questions or a warranty claim.
Your personal user account enables you to directly contact our customer service by email.
Our representatives are available on the telephone hotlines for more advanced questions or
immediate consultation.
United Kingdom
www.gigaset.com/uk/service
Service Hotline: 0845 367 0812
(local call cost charge)
Ireland
www.gigaset.com/ie/service
Service Hotline: 1850 777 277
(6.6561 Ct./Call)
Please note that if the Gigaset product is not sold by authorised dealers in the national territory
the product may not be fully compatible with the national telephone network. It is clearly specified on the box near the CE mark as well as on the bottom of the base station for which country/
countries the equipment has been developed. If the equipment is used in a manner inconsistent with this advice or with the instructions of the manual and on the product itself, this may
have implications on the conditions for warranty or guarantee claims (repair or exchange of
product).
In order to make use of the warranty, the product purchaser is asked to submit a receipt which
proves the date of purchase (date from which the warranty period starts) and the type of goods
that have been purchased.
78
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / appendix.fm / 28.04.2010
Service (Customer Care)
Questions and answers
You cannot hear a ringtone/dialling tone from
the fixed line network.
If you have any questions about the use of
your phone, you can contact us 24/7 at
www.gigaset.com/customercare.
The table below contains a list of common
problems and possible solutions.
The phone cord supplied has not been used or
has been replaced by a new cord with the wrong
pin connections.
Please always use the phone cord supplied or
ensure that the pin connections are correct
when purchasing from a retailer (
page 84).
Registration or connection problems with a
Bluetooth headset.
The connection always terminates after approx.
30 seconds.
¥
¥
¥
Reset the Bluetooth headset (see the user
guide for your headset).
Delete registration data from the handset
when deregistering the device (
page 67).
Repeat the registration process (
page 66).
¢
¢
The display is blank.
¥
¥
¢
¢
page 74).
Repeater activated/deactivated (
Activate/deactivate the handset
(
page 22).
¢
Error tone sounds after system PIN prompt.
¥
¢
You have entered the wrong system PIN.
Reset the system PIN to 0000 (
page 75).
¥
Forgotten the system PIN.
¥
The other party cannot hear you.
1. The handset is not switched on.
Press and hold the end call key a.
2. The battery is empty.
Charge the battery or replace it
(
page 13).
¥
Reset the system PIN to 0000 (
¢ page 75).
Not all menu items are displayed.
You have pressed the mute button h. The
handset is "muted".
Reactivate the microphone (
page 31).
¥
The number of the caller is not displayed
despite CLIP.
¢
The menu view is simplified.
Activate complete menu view (expert
mode •) (
page 25).
¢
"No Base" flashes on the display.
¥
1. The handset is outside the range of the base.
Move the handset closer to the base.
2. The base's range is reduced because Eco Mode
is activated.
Deactivate Eco Mode (
page 57) or
reduce the distance between the handset
and the base.
¥
¥
¢
3. The base is not switched on.
Check the base power adapter
(
page 11).
¢
"Please register handset" flashes on the dis-
¥
¢
¥
Calling Line Identification is not enabled.
The caller should ask the network provider to
enable Calling Line Identification (CLI).
You hear an error tone when keying an input.
¥
Action has failed/invalid input.
Repeat the operation.
Watch the display and refer to the user guide if
necessary.
You cannot listen to messages on the network
mailbox.
¥
Your PABX is set for pulse dialling.
Set your PABX to tone dialling.
play.
Handset has not been registered with the base or
has been deregistered.
Register the handset (
page 60).
¥
¢
Handset does not ring.
¥
¢
¥
¢ page 34).
1. The ringtone is deactivated.
Activate the ringtone (
page 72).
Version 4, 16.09.2005
2. Call divert set for "All Calls".
Deactivate call divert (
3. The phone only rings if the phone number has
been transferred.
Activate the ringtone for unknown calls
(
page 72).
¥
¢
79
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / appendix.fm / 28.04.2010
Service (Customer Care)
Gigaset SL400A only:
No time is specified for a message in the call list.
¥
¢
Date and time have not been set.
Set the date/time (
page 16).
The answering machine announces "PIN is
incorrect" during remote operation.
¥
1. You have entered the wrong system PIN.
Enter the system PIN again.
¥
2. The system PIN is still set to 0000.
Set the system PIN to something other
than 0000 (
page 75).
¢
The answering machine is not recording any
messages/has switched over to answer only.
¥
¥
Its memory is full.
Delete old messages.
Play back new messages and delete.
Exclusion of liability
Some displays may contain pixels (picture elements), which remain activated
or deactivated. As a pixel is made up of
three sub-pixels (red, green, blue), it is
possible that pixel colours may vary.
This is completely normal and does not
indicate an error.
Authorisation
Version 4, 16.09.2005
This device is intended for analogue phone
lines in the UK and on the Irish network.
Country-specific requirements have been
taken into consideration.
We, Gigaset Communications GmbH,
declare that this device meets the essential
requirements and other relevant regulations
laid down in Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of Conformity is available at this Internet address:
www.gigaset.com/docs
80
Guarantee Certificate United Kingdom
Without prejudice to any claim the user (customer) may have in relation to the dealer or
retailer, the customer shall be granted a
manufacturer's Guarantee under the conditions set out below:
u In the case of new devices and their components exhibiting defects resulting from
manufacturing and/or material faults
within 24 months of purchase, Gigaset
Communications shall, at its own option
and free of charge, either replace the
device with another device reflecting the
current state of the art, or repair the said
device. In respect of parts subject to wear
and tear (including but not limited to,
batteries, keypads, casing), this warranty
shall be valid for six months from the date
of purchase.
u This Guarantee shall be invalid if the
device defect is attributable to improper
treatment and/or failure to comply with
information contained in the user guides.
u This Guarantee shall not apply to or
extend to services performed by the
authorised dealer or the customer themselves (e. g. installation, configuration,
software downloads). User guides and
any software supplied on a separate data
medium shall be excluded from the Guarantee.
u The purchase receipt, together with the
date of purchase, shall be required as evidence for invoking the Guarantee. Claims
under the Guarantee must be submitted
within two months of the Guarantee
default becoming evident.
u Ownership of devices or components
replaced by and returned to Gigaset
Communications shall vest in Gigaset
Communications.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / appendix.fm / 28.04.2010
Service (Customer Care)
u This Guarantee shall apply to new devices
Version 4, 16.09.2005
purchased in the European Union. For
Products sold in the United Kingdom the
Guarantee is issued by: Gigaset Communications UK Limited, Quatro House, Lyon
Way, Camberley, Surrey, GU16 7ER.
u Any other claims resulting out of or in
connection with the device shall be
excluded from this Guarantee. Nothing in
this Guarantee shall attempt to limit or
exclude a Customers Statutory Rights,
nor the manufacturer's liability for death
or personal injury resulting from its negligence.
u The duration of the Guarantee shall not
be extended by services rendered under
the terms of the Guarantee.
u Insofar as no Guarantee default exists,
Gigaset Communications reserves the
right to charge the customer for replacement or repair.
u The above provisions does not imply a
change in the burden of proof to the detriment of the customer.
To invoke this Guarantee, please contact the
Gigaset Communications telephone service.
The relevant number is to be found in the
accompanying user guide.
Guarantee Certificate Ireland
Without prejudice to any claim the user (customer) may have in relation to the dealer or
retailer, the customer shall be granted a
manufacturer’s Guarantee under the conditions set out below:
u In the case of new devices and their components exhibiting defects resulting from
manufacturing and/or material faults
within 24 months of purchase, Gigaset
Communications shall, at its own option
and free of charge, either replace the
device with another device reflecting the
current state of the art, or repair the said
device. In respect of parts subject to wear
and tear (including but not limited to,
batteries, keypads, casing), this warranty
shall be valid for six months from the date
of purchase.
u This Guarantee shall be invalid if the
device defect is attributable to improper
care or use and/or failure to comply with
information contained in the user manuals. In particular claims under the Guarantee cannot be made if:
u The device is opened (this is classed as
third party intervention)
u Repairs or other work done by persons
not authorised by Gigaset Communications.
u Components on the printed circuit board
are manipulated
u The software is manipulated
u Defects or damage caused by dropping,
breaking, lightning or ingress of moisture. This also applies if defects or damage was caused by mechanical, chemical,
radio interference or thermal factors (e.g.:
microwave, sauna etc.)
u Devices fitted with accessories not
authorised by Gigaset Communications
81
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / appendix.fm / 28.04.2010
Protecting our environment
Version 4, 16.09.2005
u This Guarantee shall not apply to or
extend to services performed by the
authorised dealer or the customer themselves (e.g. installation, configuration,
software downloads). User manuals and
any software supplied on a separate data
medium shall be excluded from the Guarantee.
u The purchase receipt, together with the
date of purchase, shall be required as evidence for invoking the Guarantee. Claims
under the Guarantee must be submitted
within two months of the Guarantee
default becoming evident.
u Ownership of devices or components
replaced by and returned to Gigaset
Communications shall vest in Gigaset
Communications.
u This Guarantee shall apply to new devices
purchased in the European Union. For
Products sold in the Republic of Ireland
the Guarantee is issued by Gigaset Communications UK Limited, Quatro House,
Lyon Way, Camberley, Surrey, GU16 7ER.
u Any other claims resulting out of or in
connection with the device shall be
excluded from this Guarantee. Nothing in
this Guarantee shall attempt to limit or
exclude a Customers Statutory Rights,
nor the manufacturer’s liability for death
or personal injury resulting from its negligence.
u The duration of the Guarantee shall not
be extended by services rendered under
the terms of the Guarantee.
u Insofar as no Guarantee default exists,
Gigaset Communications reserves the
right to charge the customer for replacement or repair.
u The above provisions does not imply a
change in the burden of proof to the detriment of the customer.
To invoke this Guarantee, please contact the
Gigaset Communications helpdesk on
1850 777 277. This number is also to be
found in the accompanying user guide.
82
Protecting our
environment
Our environmental mission
statement
We, Gigaset Communications GmbH, bear
social responsibility and are actively committed to a better world. Our ideas, technologies and actions serve people, society and
the environment. The aim of our global
activity is to secure sustainable life resources
for humanity. We are committed to a responsibility for our products that comprises their
entire life cycle. The environmental impact
of products, including their manufacture,
procurement, distribution, use, service and
disposal, are already evaluated during product and process design.
Further information on environmentally
friendly products and processes is available
on the Internet at www.gigaset.com.
Environmental management
system
Gigaset Communications
GmbH is certified pursuant
to the international standards EN 14001 and
ISO 9001.
ISO 14001 (Environment): certified since
September 2007 by TüV SÜD Management
Service GmbH.
ISO 9001 (Quality): certified since 17/02/
1994 by TüV SÜD Management Service
GmbH.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / appendix.fm / 28.04.2010
Appendix
Ecological energy consumption
The use of ECO DECT (¢ page 57) saves
energy and makes an active contribution
towards protecting the environment.
Disposal
Version 4, 16.09.2005
Batteries should not be disposed of in general household waste. Observe the local
waste disposal regulations, details of which
can be obtained from your local authority.
All electrical and electronic equipment must
be disposed of separately from general
household waste using the sites designated
by local authorities.
If a product displays this
symbol of a crossed-out
rubbish bin, the product is
subject to European Directive 2002/96/EC.
The appropriate disposal and separate collection of used equipment serve to prevent
potential harm to the environment and to
health. They are a prerequisite for the re-use
and recycling of used electrical and electronic equipment.
For further information on disposing of your
used equipment, please contact your local
authority or your refuse collection service.
Appendix
Caring for your telephone
Wipe the base, charger and handset with a
damp cloth (do not use solvent or a microfiber cloth) or an antistatic cloth.
Never use a dry cloth as this can cause static.
Contact with liquid
!
If the handset should come into contact with
liquid:
1. Switch the handset off and remove the
battery immediately.
2. Allow the liquid to drain from the handset.
3. Pat all parts dry, then place the handset
with the battery compartment open and
the keypad facing down in a dry, warm
place for at least 72 hours (not in a microwave, oven etc.).
4. Do not switch on the handset again until it is completely dry.
When it has fully dried out, you will usually
be able to use it again.
83
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / appendix.fm / 28.04.2010
Appendix
Specifications
General specifications
Batteries
DECT standard
Technology: Lithium ion (Li-Ion):
Voltage:
3.7 V
Capacity:
750 mAh
Type:
V30145-K1310-X445
The handset is supplied with the recommended battery. Only an original battery
may be used.
Due to the constant progression in battery
development, the list of recommended batteries in the FAQ section of the Gigaset Customer Care pages is regularly updated:
www.gigaset.com/customercare
GAP standard
Is supported
No. of channels
60 duplex channels
Radio frequency range 1880–1900 MHz
Duplex method
Time multiplex,
10 ms frame length
Channel grid
1728 kHz
Bit rate
1152 kbit/s
Modulation
GFSK
Language code
32 kbit/s
Transmission power
10 mW, average power
per channel
Range
Up to 300 m outdoors,
up to 50 m indoors
Handset operating times/charging
times
Base power supply
230 V ~/50 Hz
The operating time of your Gigaset depends
on the capacity and age of the battery and
the way it is used. (All times are maximum
possible times).
Environmental conditions in operation
+5°C to +45°C, 20% to
75% relative humidity
Dialling mode
DTMF (tone dialling)/
PD (pulse dialling)
Standby time (hours) *
230/95
Talktime (hours)
14
Operating time for 1.5 hrs of calls per
day (hours) **
120
Charging time in charger (hours)
3
* without/with display backlight
** without display backlight
page 70)
("Setting the display backlight"
¢
Base power consumption
Version 4, 16.09.2005
Is supported
SL400
SL400A
In standby mode
approx.
1.1 W
approx.
1.2 W
During a call
approx.
1.2 W
approx.
1.3 W
84
Pin connections on the telephone
jack
3
2
1
4
5
6
1
2
3
4
5
6
unused
unused
a
b
unused
unused
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / appendix.fm / 28.04.2010
Accessing additional functions via the PC interface
Writing and editing text
The following rules apply when writing text:
u Each key between Q and O is
assigned several letters and characters.
u Control the cursor with u v t s.
Press and hold u or v to move the cursor word by word.
u Characters are inserted at the cursor position.
u Press the star key * to display the
table of special characters. Select the
required character and press the display
key §Insert§ to insert the character at the
cursor position.
u Press and hold Q to O to enter digits.
u Press display key Ñ to delete the character to the left of the cursor. Press and
hold to delete the word to the left of the
cursor.
u The first letter of the name of directory
entries is automatically capitalised, followed by lower case letters.
¤ Briefly press the key several times in suc-
cession to select the required letter/character.
Standard characters
2
3
4
5
L
M
N
O
Q
1x
1
a
d
g
j
m
p
t
w
1)
2x
3x
4x
5x
6x
7x
8x
9x
10x
b c
e f
h i
k l
n o
q r
u v
x y
. ,
2
3
4
5
6
s
8
z
?
ä
ë
ï
á
é
í
à
è
ì
â
ê
î
ã
ç
ö ñ ó ò ô õ
7 ß
ü ú ù û
9 ÿ ý æ ø å
2)
!
0
1) Space
2) Line break
Accessing additional
functions via the PC
interface
Setting upper/lower case or digits
Repeatedly press the hash key # to
change the text input mode.
123
Writing digits
Abc
Upper case *
abc
Lower case
* First letter in capitals, all others in lower case
The active mode is indicated at the bottom
right of the screen.
Writing an SMS/names
Version 4, 16.09.2005
¤ Enter the individual letters/characters by
pressing the corresponding key.
The characters assigned to the key are
shown in a selection line at the bottom left
of the screen. The selected character is highlighted.
To enable your handset to communicate
with the PC, the "Gigaset QuickSync"
program must be installed on your PC
(free to download at
www.gigaset.com/gigasetSL400).
Transferring data
After installing "Gigaset QuickSync", connect the handset to your computer using
Bluetooth (¢ page 66) or a USB data cable
(¢ page 18).
Please note
u If the USB data cable is plugged in, a
Bluetooth connection cannot be
established.
u If a USB data cable is plugged in during an existing Bluetooth connection,
the Bluetooth connection is cancelled.
85
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / appendix.fm / 28.04.2010
Accessing additional functions via the PC interface
Start the "Gigaset QuickSync" program. You
can now:
u Synchronise your handset directory with
Outlook
u Download caller pictures (.bmp) from the
computer to the handset
u Download pictures (.bmp) as a screensaver from the computer to the handset
u Download sounds (ringtones) from the
computer to the handset
During the transfer of data between handset
and PC, you will see Data transfer in
progress on the display. During this time the
keypad is disabled, and incoming calls will
be ignored.
Completing a firmware update
¤ Connect your phone to your PC using a
USB data cable (¢ page 18).
¤ Start the "Gigaset QuickSync" program
on your PC.
¤ Establish a connection to your handset.
¤ Select [Settings] ¢ [Device properties]
Procedure in the event of an error
If the update procedure fails or your phone
does not work properly following the
update, repeat the update procedure as follows:
¤ Close the "Gigaset QuickSync" program
on the PC.
¤ Remove the USB data cable from the telephone.
¤ Remove the battery (¢ page 13).
¤ Replace the battery.
¤ Complete the firmware update as
described.
If the update procedure fails several times or
you can no longer connect to the PC, proceed as follows:
¤ Close the "Gigaset QuickSync" program
on the PC.
¤ Remove the USB data cable from the telephone.
¤ Remove the battery (¢ page 13).
¤ Press and hold keys 4 and L with
the index and middle finger.
to open the [Device] tab.
¤ Click on [Firmware update].
Version 4, 16.09.2005
This launches the firmware update.
The update process can take up to 10 minutes (not including the download time). Do
not interrupt the process or remove the
USB data cable.
The data is initially loaded from the update
server on the Internet. The amount of time
this takes is dependent on the speed of your
Internet connection.
The display on your phone is switched off
and the message key f and the talk key
c start flashing.
Once the update is complete, your phone
will automatically restart.
86
¤ Replace the battery.
¤ Release keys 4 and L. The message
¤
key f and the talk key c will flash
alternately.
Complete the firmware update as
described.
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / accessories_SAG.fm / 28.04.2010
Accessories
Accessories
Gigaset handsets
Upgrade your Gigaset to a cordless PABX:
Gigaset SL400H handset
u
u
u
u
u
u
u
u
Genuine metal frame and keypad
High-quality keypad illumination
1.8´´ TFT colour display
Bluetooth® and mini USB
Directory for up to 500 vCards
Talk/standby time of up to 14h/230h
Large font for call lists and directory
Brilliant sound quality in handsfree mode:
4 handsfree settings
u Caller pictures, slide show and screensaver
(analogue and digital clock)
u Silent alert, download ringtones
u ECO DECT
u Calendar with appointment scheduler
u Night mode with time-controlled ringtone deactivation
u No interruptions from unknown calls
u Room monitor
u SMS with up to 640 characters
www.gigaset.com/gigasetsl400
Gigaset S79H handset
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
u
Version 4, 16.09.2005
Brilliant sound quality in handsfree mode
High-quality genuine metal keypad with illumination
Plus/minus key for simple volume control
1.8´´ TFT colour display
Mini USB
Directory for up to 500 vCards
Talk/standby time of up to 13h/180h, standard batteries
Large font for call lists and directory
Caller pictures, screensaver (analogue and digital clock)
Download ringtones
ECO DECT
Calendar with appointment scheduler
Night mode with time-controlled ringtone deactivation
No interruptions from unknown calls
Room monitor
SMS with up to 640 characters
www.gigaset.com/gigasets79h
87
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / accessories_SAG.fm / 28.04.2010
Accessories
Gigaset C59H handset
u Social life management with room monitor and birthday
reminders
Individual programming of ringtones with 6 VIP-groups
High-quality keypad with illumination
1.8´´ TFT colour display
Directory for up to 150 vCards
Talk/standby time of up to 12h/180h, standard batteries
Large font for call lists and directory
Brilliant sound quality in handsfree mode
Screensaver (digital clock)
ECO DECT
Alarm clock
No interruptions from unknown calls
SMS with up to 640 characters
www.gigaset.com/gigasetc59h
u
u
u
u
u
u
u
u
u
u
u
u
Gigaset SL78H handset
u
u
u
u
u
u
u
u
Version 4, 16.09.2005
Real metal frame
Modern keypad with high-quality illumination
2.2´´ TFT QVGA colour display
Bluetooth® and mini USB
Directory for up to 500 vCards
Talk/standby time of up to 14h/200h
Brilliant sound quality in handsfree mode
Caller pictures, slide show and screensaver (analogue and
digital clock)
u Download ringtones
u ECO DECT
u Calendar with appointment scheduler
u Night mode with time-controlled ringtone deactivation
u Room monitor
u SMS with up to 640 characters
www.gigaset.com/gigasetsl78h
88
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / accessories_SAG.fm / 28.04.2010
Accessories
Gigaset E49H handset
u
u
u
u
u
Resistant to shocks, dust and water splashes
Hardy illuminated keypad
Colour display
Directory for up to 150 entries
Talk/standby time of up to 12h/250h
Standard batteries
u Brilliant sound quality in handsfree mode
u Screensaver
u ECO DECT
u Alarm clock
u Room monitor
u SMS with up to 640 characters
www.gigaset.com/gigasete49h
Gigaset repeater
The Gigaset repeater can be used to increase the reception
range between your Gigaset handset and the base.
www.gigaset.com/gigasetrepeater
Version 4, 16.09.2005
Use only original accessories. This will avoid possible health risks and personal
injury, and also ensure that all the relevant regulations are complied with.
89
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / accessories_SAG.fm / 28.04.2010
Mounting the base on the wall
Mounting the base on the wall
48 mm
Version 4, 16.09.2005
approx. 2.5 mm
90
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / SL400ASIX.fm / 28.04.2010
Index
Index
Version 4, 16.09.2005
A
Access code . . . . . . . . . . . . . . . . . . . . . . . . . . 76
for a PABX . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Access protection . . . . . . . . . . . . . . . . . . . . . 75
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Acknowledge tones . . . . . . . . . . . . . . . . . . . 73
Activating
advisory tones . . . . . . . . . . . . . . . . . . . . . . 73
answering machine . . . . . . . . . . . . . . . . . 50
answering machine (remote
operation). . . . . . . . . . . . . . . . . . . . . . 55
appointment . . . . . . . . . . . . . . . . . . . . . . . 58
handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
keypad lock . . . . . . . . . . . . . . . . . . . . . . . . 22
listening in . . . . . . . . . . . . . . . . . . . . . . . . . 63
muting ringtone . . . . . . . . . . . . . . . . . . . . 43
ring delay . . . . . . . . . . . . . . . . . . . . . . . . . . 70
room monitor . . . . . . . . . . . . . . . . . . . . . . 65
two-way record . . . . . . . . . . . . . . . . . . . . . 53
Advisory tones . . . . . . . . . . . . . . . . . . . . . . . . 73
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Alert tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Anniversary . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
deactivating . . . . . . . . . . . . . . . . . . . . . . . . 38
missed . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 59
saving in the directory . . . . . . . . . . . . . . . 38
Announcement (answering machine) . . . 51
Announcement mode (answering
machine) . . . . . . . . . . . . . . . . . . . . . . . . . 50
Anonymous calling . . . . . . . . . . . . . . . . . . . . 33
Answering machine . . . . . . . . . . . . . . . . . . . 50
activating/deactivating . . . . . . . . . . . . . . 50
deleting messages . . . . . . . . . . . . . . . . . . 52
playing back messages . . . . . . . . . . . . . . 51
recording an announcement/
advisory message . . . . . . . . . . . . . . . 50
remote operation . . . . . . . . . . . . . . . . . . . 54
scrolling back . . . . . . . . . . . . . . . . . . . . . . . 52
scrolling forward . . . . . . . . . . . . . . . . . . . . 52
skip-back function . . . . . . . . . . . . . . . 52, 54
Answering machine list . . . . . . . . . . . . . 39, 40
Answering machine, see also
Network mailbox
Appointment/anniversary
display missed . . . . . . . . . . . . . . . . . . . . . . 59
Appointments . . . . . . . . . . . . . . . . . . . . . . . . 58
activating/deactivating . . . . . . . . . . . . . . 59
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
managing . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Area code
setting own area code . . . . . . . . . . . . . . . 74
Assigning a number key . . . . . . . . . . . . . . . 68
Authorisation . . . . . . . . . . . . . . . . . . . . . . . . . 80
Automatic
network provider preselection . . . . . . . 32
redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
ring delay . . . . . . . . . . . . . . . . . . . . . . . 29, 70
B
Backlight
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Base
changing . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
connecting . . . . . . . . . . . . . . . . . . . . . . . . . 11
connecting to PABX . . . . . . . . . . . . . . . . . 76
restoring to default settings. . . . . . . . . . 75
setting up . . . . . . . . . . . . . . . . . . . . . . . . . . 10
settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
system PIN . . . . . . . . . . . . . . . . . . . . . . . . . 75
Battery
charging . . . . . . . . . . . . . . . . . . . . . . . 2, 3, 15
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3
icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3
inserting . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Best base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Birthday, see Anniversary
Bluetooth
accepting a call . . . . . . . . . . . . . . . . . . . . . 29
activate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
changing device name . . . . . . . . . . . . . . 67
deregistering devices. . . . . . . . . . . . . . . . 67
list of known devices . . . . . . . . . . . . . . . . 67
registering devices . . . . . . . . . . . . . . . . . . 66
transferring directory (vCard) . . . . . . . . 37
91
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / SL400ASIX.fm / 28.04.2010
Index
Version 4, 16.09.2005
C
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Call
accepting . . . . . . . . . . . . . . . . . . . . . . . . . . 29
accepting (Bluetooth) . . . . . . . . . . . . . . . 29
connect participant . . . . . . . . . . . . . . . . . 63
ending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
external . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
make anonymous call . . . . . . . . . . . . . . . 33
picking up from answering machine . . 52
transferring (connecting) . . . . . . . . . 62, 63
two-way record . . . . . . . . . . . . . . . . . . . . . 53
Call divert . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Call duration . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Call screening during recording . . . . . . . . 53
Call swap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Call waiting
accepting/rejecting . . . . . . . . . . . . . . . . . 33
activating/deactivating . . . . . . . . . . . . . . 33
external call . . . . . . . . . . . . . . . . . . . . . . . . 33
internal call . . . . . . . . . . . . . . . . . . . . . . . . . 63
Call-by-call . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Caller picture . . . . . . . . . . . . . . . . . . . . . . 35, 72
Calling
anonymously . . . . . . . . . . . . . . . . . . . . . . . 33
external . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Calling Line Identification . . . . . . . . . . . . . . 30
restrict once . . . . . . . . . . . . . . . . . . . . . . . . 33
Caring for your telephone . . . . . . . . . . . . . . 83
CD see Call divert
Changing
destination number (room monitor) . . 65
dialling mode . . . . . . . . . . . . . . . . . . . . . . . 76
display language . . . . . . . . . . . . . . . . . . . . 69
earpiece volume . . . . . . . . . . . . . . . . . . . . 70
handsfree volume . . . . . . . . . . . . . . . . . . . 70
internal number of a handset . . . . . . . . 64
name of a handset . . . . . . . . . . . . . . . . . . 63
pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
ringtone. . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
system PIN . . . . . . . . . . . . . . . . . . . . . . . . . 75
Changing device name (Bluetooth) . . . . . 67
Changing the system PIN . . . . . . . . . . . . . . 75
Character set . . . . . . . . . . . . . . . . . . . 43, 44, 85
Charge status display . . . . . . . . . . . . . . . . . 2, 3
CLI, CLIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
CLIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
92
Colour scheme . . . . . . . . . . . . . . . . . . . . . . . . 69
Conference (internal) . . . . . . . . . . . . . . . . . . 62
Confirmation tone . . . . . . . . . . . . . . . . . . . . 73
Connecting
base to PABX . . . . . . . . . . . . . . . . . . . . . . . 76
Connecting the headset . . . . . . . . . . . . . . . 18
Consultation call . . . . . . . . . . . . . . . . . . . . . . 34
Consultation call (internal) . . . . . . . . . . . . . 62
Control key . . . . . . . . . . . . . . . . . . . . . . . . . 2, 20
Correcting incorrect entries . . . . . . . . . . . . 21
Customer Care . . . . . . . . . . . . . . . . . . . . . . . . 78
D
Deactivating
advisory tones . . . . . . . . . . . . . . . . . . . . . . 73
answering machine . . . . . . . . . . . . . . . . . 50
appointment . . . . . . . . . . . . . . . . . . . . . . . 58
handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
keypad lock . . . . . . . . . . . . . . . . . . . . . . . . 22
listening in . . . . . . . . . . . . . . . . . . . . . . . . . 63
muting ringtone . . . . . . . . . . . . . . . . . . . . 43
ring delay . . . . . . . . . . . . . . . . . . . . . . . . . . 70
room monitor . . . . . . . . . . . . . . . . . . . . . . 65
two-way record . . . . . . . . . . . . . . . . . . . . . 53
Delete key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Deleting
announcement for answering
machine . . . . . . . . . . . . . . . . . . . . . . . 51
characters . . . . . . . . . . . . . . . . . . . . . . . . . . 21
message . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Deregistering (handset). . . . . . . . . . . . . . . . 61
Deregistering devices (Bluetooth) . . . . . . 67
Destination number (room monitor) . . . . 65
Dialling
using quick dial . . . . . . . . . . . . . . . . . . 37, 68
using the directory . . . . . . . . . . . . . . . . . . 36
Dialling mode. . . . . . . . . . . . . . . . . . . . . . . . . 76
Dialling pause . . . . . . . . . . . . . . . . . . . . . . . . 77
Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
copying number from text . . . . . . . . . . . 37
managing entries . . . . . . . . . . . . . . . . . . . 36
opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
order of entries . . . . . . . . . . . . . . . . . . . . . 36
saving anniversary . . . . . . . . . . . . . . . . . . 38
saving entry . . . . . . . . . . . . . . . . . . . . . . . . 35
saving sender’s (SMS) number. . . . . . . . 45
sending entry/list to handset. . . . . . . . . 37
transferring a vCard (Bluetooth) . . . . . . 37
using to enter numbers . . . . . . . . . . . . . . 38
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / SL400ASIX.fm / 28.04.2010
Index
Display
backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
changing display language . . . . . . . . . . 69
colour scheme . . . . . . . . . . . . . . . . . . . . . . 69
directory memory . . . . . . . . . . . . . . . . . . . 37
in idle status . . . . . . . . . . . . . . . . . . . . . 17, 22
memory (resource directory) . . . . . . . . . 73
missed anniversaries . . . . . . . . . . . . . . . . 41
missed
appointments/anniversaries . . . . . 59
network mailbox message . . . . . . . . . . . 56
number (CLI/CLIP) . . . . . . . . . . . . . . . . . . . 30
screensaver . . . . . . . . . . . . . . . . . . . . . . . . . 69
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
slide show . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Display keys . . . . . . . . . . . . . . . . . . . . . . . . . 2, 4
assigning . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Draft message list (SMS) . . . . . . . . . . . . . . . 42
E
Earpiece volume . . . . . . . . . . . . . . . . . . . . . . 70
ECO DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Eco mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Eco mode+ . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
E-mail address
copying from the directory . . . . . . . . . . 38
End call key . . . . . . . . . . . . . . . . . . . . . . . . . 2, 29
Ending
call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Entry
from directory Select . . . . . . . . . . . . . . . . 36
saving, changing (preselection) . . . . . . 32
Environment . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Error tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Expert mode . . . . . . . . . . . . . . . . . . . . . . . . . . 25
External call
call waiting . . . . . . . . . . . . . . . . . . . . . . . . . 33
to ans. mach. Forward . . . . . . . . . . . . . . . 53
F
Fast access
answering machine . . . . . . . . . . . . . . . . . 54
network mailbox . . . . . . . . . . . . . . . . . . . . 56
Firmware update . . . . . . . . . . . . . . . . . . . . . . 86
H
Handset
activating/deactivating . . . . . . . . . . . . . . 22
advisory tones . . . . . . . . . . . . . . . . . . . . . . 73
changing internal number . . . . . . . . . . . 64
changing name . . . . . . . . . . . . . . . . . . . . . 63
changing the number . . . . . . . . . . . . . . . 64
changing to a different base . . . . . . . . . 61
changing to best reception . . . . . . . . . . 61
colour scheme . . . . . . . . . . . . . . . . . . . . . . 69
contact with liquid . . . . . . . . . . . . . . . . . . 83
deregistering . . . . . . . . . . . . . . . . . . . . 60, 61
display backlight . . . . . . . . . . . . . . . . . . . . 70
display language . . . . . . . . . . . . . . . . . . . . 69
earpiece volume . . . . . . . . . . . . . . . . . . . . 70
handsfree volume . . . . . . . . . . . . . . . . . . . 70
idle status . . . . . . . . . . . . . . . . . . . . . . . . . . 22
keypad backlight . . . . . . . . . . . . . . . . . . . 70
large font. . . . . . . . . . . . . . . . . . . . . . . . . . . 69
list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
locating . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
registering . . . . . . . . . . . . . . . . . . . . . . . . . 60
registering to a different base . . . . . . . . 61
restoring to default settings. . . . . . . . . . 74
screensaver . . . . . . . . . . . . . . . . . . . . . . . . . 69
set up for use . . . . . . . . . . . . . . . . . . . . . . . 13
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
transferring a call . . . . . . . . . . . . . . . . . . . 62
using multiple . . . . . . . . . . . . . . . . . . . . . . 60
using room monitor . . . . . . . . . . . . . . . . . 64
Handset mode . . . . . . . . . . . . . . . . . . . . . . . . 31
Handset operating time
in room monitor mode . . . . . . . . . . . . . . 65
Handsfree
key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
set profile . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Handsfree mode . . . . . . . . . . . . . . . . . . . . . . 31
Handsfree profile. . . . . . . . . . . . . . . . . . . . . . 71
Hash key . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 22
Headset (Bluetooth) . . . . . . . . . . . . . . . . . . . 66
Hearing aids . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Version 4, 16.09.2005
G
General troubleshooting . . . . . . . . . . . . . . . 79
Group call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Guarantee Certificate . . . . . . . . . . . . . . . . . . 80
93
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / SL400ASIX.fm / 28.04.2010
Index
I
Icon
alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . 60
answering machine . . . . . . . . . . . . . . 50, 53
for new messages . . . . . . . . . . . . . . . . . . . 40
keypad lock . . . . . . . . . . . . . . . . . . . . . . . . 22
new message (answering machine) . . . 51
new SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
ringtone. . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Idle status
returning to . . . . . . . . . . . . . . . . . . . . . . . . 22
Idle status (display) . . . . . . . . . . . . . . . . . 17, 22
Incoming message list (SMS) . . . . . . . . . . . 43
Incorrect entries (correction) . . . . . . . . . . . 21
Internal
conference . . . . . . . . . . . . . . . . . . . . . . . . . 62
consultation . . . . . . . . . . . . . . . . . . . . . . . . 62
listening in . . . . . . . . . . . . . . . . . . . . . . . . . 63
making calls . . . . . . . . . . . . . . . . . . . . . . . . 61
Internal call . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
call waiting . . . . . . . . . . . . . . . . . . . . . . . . . 63
K
Key
assigning to a function or number . . . . 68
Key 1 (fast access) . . . . . . . . . . . . . . . . . . . 2, 54
Keypad backlight . . . . . . . . . . . . . . . . . . . . . 70
Keypad lock . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Keys
control key . . . . . . . . . . . . . . . . . . . . . . . 2, 20
delete key . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
display keys . . . . . . . . . . . . . . . . . . . . . . . 2, 4
end call key . . . . . . . . . . . . . . . . . . . . . . . 2, 29
fast access . . . . . . . . . . . . . . . . . . . . . . . . 2, 54
handsfree key. . . . . . . . . . . . . . . . . . . . . . . . .2
hash key . . . . . . . . . . . . . . . . . . . . . . . . . 2, 22
message key . . . . . . . . . . . . . . . . . . . . . . . . . .2
mute key . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
On/Off key . . . . . . . . . . . . . . . . . . . . . . . . . . .2
quick dial . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
recall key . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
star key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
talk key. . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 29
Version 4, 16.09.2005
L
Language
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Large font . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Linking, see SMS
94
List
answering machine . . . . . . . . . . . . . . 39, 40
call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
known devices (Bluetooth) . . . . . . . . . . 67
missed calls . . . . . . . . . . . . . . . . . . . . . . . . 39
network mailbox . . . . . . . . . . . . . . . . . . . . 40
SMS draft message list . . . . . . . . . . . . . . . 42
SMS incoming message list . . . . . . . 40, 43
Listening in to a call . . . . . . . . . . . . . . . . . . . 63
Locating
handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Lock
activating/deactivating keypad lock . . 22
M
Mailbox ID, see SMS
Mailboxes, see SMS
Making calls
accepting a call . . . . . . . . . . . . . . . . . . . . . 29
external . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Manual redial . . . . . . . . . . . . . . . . . . . . . . . . . 39
Medical equipment . . . . . . . . . . . . . . . . . . . . .8
Memory
directory . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
resource directory. . . . . . . . . . . . . . . . . . . 73
Menu
end tone . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Menu view
complete (expert mode) . . . . . . . . . . . . . 25
simplified . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Message key
open list. . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
opening lists . . . . . . . . . . . . . . . . . . . . . . . . 40
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
copy number to directory . . . . . . . . . . . . 52
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
marking as "new" . . . . . . . . . . . . . . . . . . . 52
playing back . . . . . . . . . . . . . . . . . . . . . . . . 51
Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Missed
anniversary . . . . . . . . . . . . . . . . . . . . . . . . . 59
appointment . . . . . . . . . . . . . . . . . . . . . . . 59
Missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / SL400ASIX.fm / 28.04.2010
Index
Music on hold. . . . . . . . . . . . . . . . . . . . . . . . . 74
Mute key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Muting
first ringtone . . . . . . . . . . . . . . . . . . . . . . . 43
Muting the handset . . . . . . . . . . . . . . . . . . . 31
N
Name
of a handset . . . . . . . . . . . . . . . . . . . . . . . .
Network mailbox . . . . . . . . . . . . . . . . . . . . . .
Network mailbox message
viewing . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Network provider preselection
automatic . . . . . . . . . . . . . . . . . . . . . . . . . .
Network services . . . . . . . . . . . . . . . . . . . . . .
Notification via SMS . . . . . . . . . . . . . . . . . . .
Number
as destination for room monitor . . . . . .
copying from an SMS text. . . . . . . . . . . .
copying from directory . . . . . . . . . . . . . .
copying to the directory . . . . . . . . . . . . .
displaying caller's number (CLIP) . . . . .
entering with directory . . . . . . . . . . . . . .
saving in directory . . . . . . . . . . . . . . . . . .
63
56
56
32
33
45
65
45
38
37
30
38
35
O
On/Off key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Operating remotely . . . . . . . . . . . . . . . . . . . 54
Order in directory . . . . . . . . . . . . . . . . . . . . . 36
P
Version 4, 16.09.2005
PABX
connecting base . . . . . . . . . . . . . . . . . . . . 76
pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
saving access code . . . . . . . . . . . . . . . . . . 76
setting dialling mode . . . . . . . . . . . . . . . . 76
setting recall . . . . . . . . . . . . . . . . . . . . . . . . 76
SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
switching to tone dialling . . . . . . . . . . . . 77
Package contents . . . . . . . . . . . . . . . . . . . . . . .9
Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Paging key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Pause
after access code . . . . . . . . . . . . . . . . . . . . 77
after line seizure . . . . . . . . . . . . . . . . . . . . 77
after recall key . . . . . . . . . . . . . . . . . . . . . . 77
PC Interface . . . . . . . . . . . . . . . . . . . . . . . . . . 85
PD (pulse dialling) . . . . . . . . . . . . . . . . . . . . . 76
Picture
caller . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35, 72
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
renaming. . . . . . . . . . . . . . . . . . . . . . . . . . . 73
PIN change
system PIN . . . . . . . . . . . . . . . . . . . . . . . . . 75
Pin connections . . . . . . . . . . . . . . . . . . . . . . . 84
Playing back
announcement (answering
machine). . . . . . . . . . . . . . . . . . . . . . . 51
message (answering machine) . . . . . . . 51
Power adapter . . . . . . . . . . . . . . . . . . . . . . . . . .8
Power consumption . . . . . . . . . . . . . . . . . . . 84
Preselection . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Protecting the phone against access . . . . 75
Pulse dialling . . . . . . . . . . . . . . . . . . . . . . . . . 76
Q
Questions and answers . . . . . . . . . . . . . . . . 79
Quick dial . . . . . . . . . . . . . . . . . . . . . . . . . 35, 68
R
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Recall key. . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 77
Reception booster, see Repeater
Recording
two-way record . . . . . . . . . . . . . . . . . . . . . 53
Recording quality . . . . . . . . . . . . . . . . . . . . . 53
Recording time . . . . . . . . . . . . . . . . . . . . . . . 53
Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Redirect see Call divert
Registering (handset) . . . . . . . . . . . . . . . . . . 60
Registering devices (Bluetooth) . . . . . . . . 66
Registration key . . . . . . . . . . . . . . . . . . . . . . . . .2
Reminder call . . . . . . . . . . . . . . . . . . . . . . . . . 38
Repeater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Resource directory . . . . . . . . . . . . . . . . . . . . 72
Ring delay . . . . . . . . . . . . . . . . . . . . . . . . . 53, 70
Ringback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Ringtone
changing . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
setting volume . . . . . . . . . . . . . . . . . . . . . 71
Room monitor . . . . . . . . . . . . . . . . . . . . . . . . 64
S
Saving (access code). . . . . . . . . . . . . . . . . . . 76
Screensaver . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Search directory . . . . . . . . . . . . . . . . . . . . . . 36
95
Gigaset SL400/400 A / GBR / A31008-M2103-L101-1-7619 / SL400ASIX.fm / 28.04.2010
Index
Version 4, 16.09.2005
Sending
directory entry to handset . . . . . . . . . . . 37
Sensitivity (room monitor) . . . . . . . . . . . . . 65
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Setting the date . . . . . . . . . . . . . . . . . . . . 16, 28
Setting the time . . . . . . . . . . . . . . . . . . . . 16, 28
Setting up
base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Signal tone, see Advisory tones
Silent alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Skip-back function
(answering machine) . . . . . . . . . . . 52, 54
Slide show . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
active send service centre. . . . . . . . . . . . 47
changing mailbox . . . . . . . . . . . . . . . . . . . 46
deleting . . . . . . . . . . . . . . . . . . . . . . . . . 43, 44
draft message list . . . . . . . . . . . . . . . . . . . 42
forwarding . . . . . . . . . . . . . . . . . . . . . . . . . 44
incoming message list . . . . . . . . . . . . 40, 43
linked . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
mailbox ID . . . . . . . . . . . . . . . . . . . . . . . . . . 46
mailboxes . . . . . . . . . . . . . . . . . . . . . . . . . . 46
notification via SMS . . . . . . . . . . . . . . . . . 45
PIN protection . . . . . . . . . . . . . . . . . . . . . . 46
reading . . . . . . . . . . . . . . . . . . . . . . . . . 43, 44
receiving . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
replying to or forwarding . . . . . . . . . . . . 44
saving number. . . . . . . . . . . . . . . . . . . . . . 45
self help with error messages . . . . . . . . 49
sending to a personal mailbox . . . . . . . 47
to PABXs . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
troubleshooting . . . . . . . . . . . . . . . . . . . . 49
vCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
writing . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 85
SMS centre
changing number . . . . . . . . . . . . . . . . . . . 47
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Snooze mode . . . . . . . . . . . . . . . . . . . . . . . . . 60
Sound, see Ringtone
Special functions . . . . . . . . . . . . . . . . . . . . . . 76
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 84
Star key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
System settings . . . . . . . . . . . . . . . . . . . . . . . 75
96
T
Talk key . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 29
Telephone jack
pin connections . . . . . . . . . . . . . . . . . . . . 84
Text message, see SMS
Tone dialling . . . . . . . . . . . . . . . . . . . . . . . 76, 77
Troubleshooting (SMS) . . . . . . . . . . . . . . . . 49
U
Unknown. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unknown call off . . . . . . . . . . . . . . . . . . . . . .
Unknown caller . . . . . . . . . . . . . . . . . . . . . . .
Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USB connection . . . . . . . . . . . . . . . . . . . . . . .
30
72
30
86
18
V
vCard (SMS). . . . . . . . . . . . . . . . . . . . . . . . . . .
Volume
earpiece . . . . . . . . . . . . . . . . . . . . . . . . . . . .
handset handsfree volume. . . . . . . . . . .
loudspeaker . . . . . . . . . . . . . . . . . . . . . . . .
ringtone . . . . . . . . . . . . . . . . . . . . . . . . . . .
45
70
70
70
71
W
Warning tone, see Advisory tones
Writing (SMS) . . . . . . . . . . . . . . . . . . . . . . . . . 42
Writing and editing text . . . . . . . . . . . . . . . 85