Showline SL STRIP 400 RGBW LED Luminaires User`s manual

SL STRIP 400 RGBW LED Luminaires
IP20 Rated Models
Showline Offices
Dallas
10911 Petal Street
Dallas, TX 75238
Tel: +1 214-647-7880
Fax: +1 214-647-8030
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: +64 9 481 0100
Fax: +64 9 481 0101
Asia
Unit C, 14/F, Roxy Industrial Centre
No. 41-49 Kwai Cheong Road
Kwai Chung, N.T., Hong Kong
Tel: +852 2796 9786
Fax: +852 2798 6545
Europe
Rondweg zuid 85
Winterswijk 7102 JD
The Netherlands
Tel: +31 (0) 543-542516
www.philips.com/showline
The material in this manual is for information purposes only and is subject to change without notice. Showline
assumes no responsibility for any errors or omissions which may appear in this manual. For comments and
suggestions regarding corrections and/or updates to this manual, please contact your nearest Showline office.
El contenido de este manual es solamente para información y está sujeto a cambios sin previo aviso. Showline no
asume responsabilidad por errores o omisiones que puedan aparecer. Cualquier comentario, sugerencia o corrección
con respecto a este manual, favor de dirijirlo a la oficina de Showline más cercana.
Der Inhalt dieses Handbuches ist nur für Informationszwecke gedacht, Aenderungen sind vorbehalten. Showline
uebernimmt keine Verantwortung für Fehler oder Irrtuemer, die in diesem Handbuch auftreten. Für Bemerkungen
und Verbesserungsvorschlaege oder Vorschlaege in Bezug auf Korrekturen und/oder Aktualisierungen in diesem
Handbuch, moechten wir Sie bitten, Kontakt mit der naechsten Showline-Niederlassung aufzunehmen.
Le matériel décrit dans ce manuel est pour information seulement et est sujet à changements sans préavis. La
compagnie Showline n'assume aucune responsibilité sur toute erreur ou ommission inscrite dans ce manuel. Pour
tous commentaires ou suggestions concernant des corrections et/ou les mises à jour de ce manuel, veuillez s'il vous
plait contacter le bureau de Showline le plus proche.
Note: Information contained in this document may not be duplicated in full or in part by any person without prior written
approval of Showline. Its sole purpose is to provide the user with conceptual information on the equipment mentioned. The use of
this document for all other purposes is specifically prohibited.
Document Number: SL STRIP 400 RGBW LED Luminaires Users
Version as of: 24-004-3416-00
SL STRIP 400 RGBW LED Luminaire Installation & User’s Manual
©2013 Philips Group. All rights reserved.
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
IMPORTANT INFORMATION
Warnings and Notices
When using electrical equipment, basic safety precautions should always be followed including the following:
a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b. Do not use outdoors.
c. Do not mount near gas or electric heaters.
d. Equipment should be mounted in locations and at heights where it will not readily be subjected to
tampering by unauthorized personnel.
e. The use of accessory equipment not recommended by the manufacturer may cause an unsafe
condition.
f. Do not use this equipment for other than intended use.
g. Refer service to qualified personnel.
SAVE THESE INSTRUCTIONS.
WARNING: You must have access to a main circuit breaker or other power disconnect device
before installing any wiring. Be sure that power is disconnected by removing fuses or turning the
main circuit breaker off before installation. Installing the device with power on may expose you to
dangerous voltages and damage the device. A qualified electrician must perform this installation.
WARNING: Refer to National Electrical Code® and local codes for cable specifications. Failure to
use proper cable can result in damage to equipment or danger to personnel.
WARNING: This equipment is intended for installation in accordance with the National Electric
Code® and local regulations. It is also intended for installation in indoor applications only. Before
any electrical work is performed, disconnect power at the circuit breaker or remove the fuse to avoid
shock or damage to the control. It is recommended that a qualified electrician perform this
installation.
Additional Resources for DMX512
For more information on installing DMX512 control systems, the following publication is available for purchase
from the United States Institute for Theatre Technology (USITT), "Recommended Practice for DMX512: A Guide
for Users and Installers, 2nd edition" (ISBN: 9780955703522). USITT Contact Information:
USITT
315 South Crouse Avenue, Suite 200
Syracuse, NY 13210-1844
Phone: 1.800.938.7488 or 1.315.463.6463
www.usitt.org
Showline Limited Two-Year Warranty
Showline offers a two-year limited warranty of its luminaires against defects in materials or workmanship from
the date of delivery. A copy of Showline two-year limited warranty containing specific terms and conditions can
be obtained by contacting your local Showline office.
Sh wline
1
Installation & User’s Manual
SL STRIP 400 RGBW LED Luminaires
TABLE OF CONTENTS
Showline Offices..................................................................................................................................... Inside Front Cover
IMPORTANT INFORMATION
Warnings and Notices......................................................................................................................................................... 1
Additional Resources for DMX512.................................................................................................................................... 1
Showline Limited Two-Year Warranty .............................................................................................................................. 1
TABLE OF CONTENTS
PREFACE
About this Manual ...................................................................................................................................................................... 3
Included Items............................................................................................................................................................................. 3
SL STRIP 400 RGBW LED Luminaire Accessories ................................................................................................................. 3
SL STRIP 400 RGBW LED LUMINAIRE OVERVIEW
SL STRIP 400 RGBW LED Luminaire Components ................................................................................................................ 4
Major Luminaire Components............................................................................................................................................ 4
LCD Display / Menu System.............................................................................................................................................. 5
INSTALLATION AND SET UP
Power Requirements ................................................................................................................................................................... 6
AC Power Operation........................................................................................................................................................... 6
Connecting Power....................................................................................................................................................................... 6
Connecting SL STRIP 400 RGBW LED Luminaires to AC Power................................................................................... 7
Connecting to the DMX512 Network......................................................................................................................................... 8
Mounting Luminaire ................................................................................................................................................................... 9
OPERATION AND PROGRAMMING
LCD Display and Menu System ............................................................................................................................................... 11
LCD Display and Menu System Operation .............................................................................................................................. 11
Quick Selection Buttons ........................................................................................................................................................... 13
Edit a Preset Button .......................................................................................................................................................... 13
Edit a Chase Button .......................................................................................................................................................... 13
DMX Address Button ....................................................................................................................................................... 13
Dimming Curve Selection ........................................................................................................................................................ 14
Master / Slave Operational Mode ............................................................................................................................................. 15
DMX CONTROL
16-Bit Mode.............................................................................................................................................................................. 16
8-Bit Mode................................................................................................................................................................................ 18
HSIC Mode ............................................................................................................................................................................... 21
SL STRIP 400 RGBW LED Luminaire DMX Timing Channel Detail ................................................................................... 22
SL STRIP 400 RGBW LED Luminaire RDM Parameter IDs ................................................................................................. 27
CLEANING AND CARE
Special Cleaning and Care Instructions .................................................................................................................................... 31
Front Lens Cleaning.................................................................................................................................................................. 31
Service and Maintenance .......................................................................................................................................................... 31
TECHNICAL SPECIFICATIONS
SL STRIP 400 RGBW LED Luminaire Operational Specifications........................................................................................ 32
SL STRIP 400 RGBW LED Luminaire Dimensions ............................................................................................................... 32
2
TABLE OF CONTENTS
Sh wline
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
PREFACE
1. About this Manual
The document provides installation and operation instructions for the following products:
SL STRIP 400 RGBW LED Luminaire (IP20 rated)
Please read all instructions before installing or using this product.Retain this manual for future reference. Additional
product information and descriptions may be found on the product specification sheet.
Note: The SL STRIP 400 RGBW LED Luminaire is universal voltage 100 to 240 VAC (auto-ranging).
2. Included Items
Each SL STRIP 400 RGBW LED Lumi
naire includes the following items:
SL STRIP 400 RGBW LED Luminaire
Installation and User’s Manual (this document)
3. SL STRIP 400 RGBW LED Luminaire Accessories
Part Number
Description
MC
Mega Claw, Black, Anodized
SC
Molded Yoke C-Clamp
HC
Light Weight Half Coupler
82003
Safety Cable
Sh wline
About this Manual
3
SL STRIP 400 RGBW LED Luminaires
Installation & User's Manual
SL STRIP 400 RGBW LED LUMINAIRE OVERVIEW
1. SL STRIP 400 RGBW LED Luminaire Components
Major Luminaire Components
Side of Unit
Luminaire Mount*
Luminaire Mount*
High-Intensity RGBW LED Array (x36)
Top of Unit
Safety Cable Anchor Points
AC Input
Safety Cable Anchor Points
LCD Display /
Menu System
AC Output
Bottom of Unit
DMX512 /
RDM Input
DMX512 /
RDM Output
Figure 1: SL STRIP 400 RGBW LED Luminaire Components
Note: *Mounts can be removed and reversed. See "Mounting Luminaire" on page 9 for more information.
4
SL STRIP 400 RGBW LED LUMINAIRE OVERVIEW
Sh wline
Installation & User’s Manual
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
INSTALLATION AND SET UP
1. Power Requirements
The SL STRIP 400 RGBW LED Luminaire operates on AC input voltages from 100 to 240 VAC.
WARNING! This unit does not contain an ON/OFF switch. Always disconnect power input cable to completely
remove power from unit when not in use.
AC Power Operation
When connected to an AC source, the unit operates on 100 to 240 volts AC (+/- 10%, auto-ranging). The luminaire
contains an auto-ranging power supply. Each luminaire can draw up to 95 Watts.
WARNING! Maximum amount of units that may be daisy-chained is (A) 17 units 100 ~ 120VAC or (B) 32 units 230
~ 240VAC (10 Amps).
Table 1: SL STRIP 400 RGBW LED Luminaire Voltage (VAC) vs. Current*
Voltage (AC)
Total Current (A)
Voltage (AC)
Total Current (A)
100
0.95
180
0.53
110
0.86
190
0.50
120
0.79
200
0.48
130
0.73
210
0.45
140
0.67
220
0.43
150
0.63
230
0.41
160
0.59
240
0.40
170
0.56
Note: For wiring of AC input connector, refer to "Connecting SL STRIP 400 RGBW LED Luminaires to AC Power"
on page 7.
2. Connecting Power
Units can be powered in one of two ways:
• Direct connection to a AC power source using an AC input cable. For wiring of AC input connector, refer to "Connecting SL STRIP 400 RGBW LED Luminaires to AC Power" on page 7.
• Connection from the AC output of another SL STRIP 400 RGBW LED Luminaire. When using this method, it is
very important not to connect any other type of equipment device.
WARNING! Only connect other SL STRIP 400 RGBW LED Luminaires to the AC Output (Thru) connector of a SL
STRIP 400 RGBW LED Luminaire.
6
INSTALLATION AND SET UP
Sh wline
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
Connecting SL STRIP 400 RGBW LED Luminaires to AC Power
The unit is supplied with an AC input cable without an input connector. Input connector is a user-supplied accessory
to fit your application.
Table 2 describes how to connect power to your SL STRI P 400 RGBW LED Luminaire. Field wiring of the SL
STRIP 400 RGBW LED Luminaire is straight forward. A total of 3 wires/conductors is supplied from the unit.
The following wiring scheme is used:
Table 2: SL STRIP 400 RGBW LED Luminaire (IP20 Rated Models) AC Input Connections
Wire Color
Purpose
Brown
Main / Line (100 to 240VAC)
Blue
Neutral
Green/Yellow
Ground (Earth)
AC Output
Bottom of Unit
AC Input
Figure 3: SL STRIP 400 RGBW LED Luminaire AC Input & Output Connections
CAUTION: In the event the AC input cable of this luminaire is damaged, it must be replaced with an approved
cable through an Authorized Showline Dealer or Service Center.
Sh wline
Connecting Power
7
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
3. Connecting to the DMX512 Network
Basic DMX512 installation consists of connecting multiple SL STRIP 400 RGBW LED Luminaires together (up
to 32 luminaires) in "daisy-chain" fashion. A cable runs from the control console (or DMX512 control source) to
the DMX connector on the first SL STRIP 400 RGBW LED Luminaire. Another cable runs from the other DMX
connector on the first unit to a DMX connector on the next SL STRIP 400 RGBW LED Luminaire (or DMX512
device to be controlled).
DMX512 / RDM Output
Bottom of Unit
DMX512 / RDM Input
Figure 4: SL STRIP 400 RGBW LED Luminaire DMX512 Input / Output Connections
Note: For more information on DMX512 networking and systems, refer to "Additional Resources for DMX512" on
page 1. For SL STRIP 400 RGBW LED Luminaire DMX Mapping, refer to "DMX CONTROL" on page 17.
SL STRIP 400 RGBW LED Luminaires
DMX512
(from console or
control device)
DMX512 (out from first
DMX512 (out to the next
to second luminaire)
luminaire or DMX512
controlled device)
DMX512 Connections
DMX512 Signal
XLR Pin
Common (Drain)
1
DMX512 -
2
DMX512 +
3
Note: Remaining pins on each connector are not used.
Figure 5: SL STRIP 400 RGBW LED Luminaire - DMX512 Connections
8
INSTALLATION AND SET UP
Sh wline
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
4. Mounting Luminaire
The SL STRIP 400 RGBW LED Luminaire is provided with two mounts and multiple safety cable anchor points
(as described in "Major Luminaire Components" on page 4 and Figure 7 on page 10.)
The two mounts are easily removed and reversed as required (as illustrated in Figure 6). These mounts are designed
to accept a variety of mounting hooks, clamps, etc. for hanging applications or can be set on the mounts for floor
applications. Refer to Figure 7 for additional information.
(* Per Side)
Luminaire
M3 Mount Screw (x2) *
M6 Mount Screw (x2) *
OR
Mount (x1) *
OR
Figure 6: Mount Removal and Installation
Simply attach hook, clamp, etc. to the SL STRIP 400 RGBW LED Luminaire mount assembly in the M10 hole.
Sh wline
Mounting Luminaire
9
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
Note: Mounting hooks, clamps, etc. are sold separately or by others. For available mounting accessories refer to "SL
STRIP 400 RGBW LED Luminaire Accessories" on page 3.
Hooks / Clamps
(sold separately)
Note:
Mounting hole
size is M10.
Mount
Mount
SAFETY CABLE: Is sold separately and recommended
for all hanging installation and may be required by
national and local codes. Use safety cable anchor points
for this fixture.
Safety Cable Anchor Points
Safety Cable Anchor Points
Figure 7: Mounting Luminaire - Hanging Applications
10
INSTALLATION AND SET UP
Sh wline
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
3. Quick Selection Buttons
When in Manual Mode, the SL STRIP 400 RGBW LED Luminaire’s features can be accessed via the on-board LCD
menu system or via three quick select buttons:
• Edit a Preset Button
• Edit a Chase Button
• DMX Address Button
Edit a Preset Button
Edit a Preset
To edit and save a preset:
Step 1. Press Edit a Preset button. Current preset will be shown.
Edit a Preset
H
S
I
C
Step 2. Use LEFT and RIGHT arrow buttons to scroll through all presets.
12%
0%
43%
HSI Mode
Step 3. Once at desired preset, use UP and DOWN arrows to access
(highlight) preset parameters. Once in desired parameter, use LEFT
and RIGHT arrow buttons to adjust parameter value as desired.
Step 4. Once all values are adjusted as desired, press OK (Check Mark) button.
Step 5. Save preset menu option will appear. Use LEFT and RIGHT arrow buttons to select preset number.
Step 6. If saving preset, press OK (Check Mark) button. Confirm choice.
Step 7. Preset is now saved.
Edit a Chase Button
Edit a Chase
To edit and save a chase:
Step 1. Press Edit a Chase button. Current chase will be shown.
Built In Chase 8
Step 2. Use LEFT and RIGHT arrow buttons to scroll through all chases
(Built In and User Chases).
Total Steps
24
Speed
8
Fade
S
70%
Note: For Built In Chases, only the Speed and Fade parameters may be
changed and saved. For User Chases, Chase Number, Total Steps, Speed, and
Fade Parameters may be changed and saved.
Step 3. Once at desired chase, use UP and DOWN arrows to access (highlight) chase parameters. Once in desired
parameter, use LEFT and RIGHT arrow buttons to adjust parameter value as desired.
Step 4. Once all values are adjusted as desired, press OK (Check Mark) button.
Step 5. Save chase menu option will appear. Use LEFT and RIGHT arrow buttons to select chase number.
Step 6. If saving chase, press OK (Check Mark) button. Confirm choice.
Step 7. Chase is now saved.
DMX Address Button
DMX Address
To edit and save a DMX address:
Step 1. Press DMX Address button. Current DMX Address will be shown.
Step 2. Press OK (Check Mark) button to highlight a digit in the DMX
address.
Address
267
Step 3. Use LEFT and RIGHT arrow buttons to scroll through all digits.
Step 4. Once at desired digit, use UP and DOWN arrows to change
highlighted digit. Once digit is set, use LEFT and RIGHT arrow buttons to set other digits in DMX address.
Step 5. Once all digits are set in DMX address, press OK (Check Mark) button.
Step 6. DMX will display and is saved.
Sh wline
Quick Selection Buttons
13
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
4. Dimming Curve Selection
Through the menu, you are able to select one of four dimming curves:
• Linear Curve
• PL_Curve
• S_Curve
• Square Curve
Lumen Output
PL_Curve *
Lumen Output
Linear Curve
0
DMX Value
0
DMX Value
*Same dimming response curve of certain Philips Selecon and Philips Vari-Lite
luminaires.
S_Curve
Lumen Output
Lumen Output
Square Curve
0
DMX Value
0
DMX Value
Figure 10: SL STRIP 400 RGBW LED Luminaire Dimmer Curves
14
OPERATION AND PROGRAMMING
Sh wline
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
5. Master / Slave Operational Mode
The Master / Slave Operational Mode allows one SL STRIP 400 RGBW LED Luminaire to act as the "Master" unit
and all other connected units are controlled by this unit. When a unit is set to "Slave" mode, it will only listen to and
follow any commands sent from a "Master" unit. Only one "Master" unit is allowed in this type of operation.
To setup a master / slave network:
Step 1. Set the first device in the DMX512 chain to Master Mode through the unit’s menu system.
Step 2. Set all other connected units to Slave Mode.
Step 3. The master unit can be controlled via DMX512, RDM or through standalone operation (self-contained
network utilizing on-board effects). The slave units will mimic the master unit’s operation in all cases.
Note: For more information on DMX512 networking and systems, refer to "Additional Resources for DMX512" on
page 1. For SL STRIP 400 RGBW LED Luminaire DMX Mapping, refer to "DMX CONTROL" on page 16.
Optional:
DMX512 (in - from a
DMX controller)
Master Unit
DMX512 (out from first
to second luminaire)
Slave Unit
SL STRIP 400 RGBW
LED Luminaires
DMX512 (out from
second to next luminaire)
Slave Unit
Figure 11: SL STRIP 400 RGBW LED Luminaire - Master / Slave Configuration
Sh wline
Master / Slave Operational Mode
15
3
4
5
6
7
8
2
2
3
4
Installation & User’s Manual
5
6
Installation & User’s Manual
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
Table 6: SL STRIP 400 RGBW LED Luminaire Timing Channel Detail
DMX
7
18
3.6
19
3.8
8
9
10
11
(unless noted)
20
4
21
4.2
22
4.4
23
4.6
24
4.8
25
5
26
5.2
27
5.4
28
5.6
29
5.8
30
6
12
31
6.2
32
6.4
13
33
6.6
34
6.8
35
7.0
14
36
7.2
37
7.4
15
38
7.6
39
7.8
40
8
16
41
8.2
42
8.4
17
43
8.6
44
8.8
45
9
18
46
9.2
47
9.4
19
48
9.6
49
9.8
20
21
22
23
24
25
26
Sh wline
= Seconds
% Value
50
10
51
10.2
52
10.4
53
10.6
54
10.8
55
11
56
11.2
57
11.4
58
11.6
59
11.8
60
12
61
12.2
62
12.4
63
12.6
64
12.8
65
13
66
13.2
67
13.4
68
13.6
SL STRIP 400 RGBW LED Luminaire DMX Timing Channel Detail
23
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
Table 6: SL STRIP 400 RGBW LED Luminaire Timing Channel Detail
% Value
DMX
27
69
28
29
30
31
32
33
34
35
36
37
38
39
40
14
71
14.2
72
14.4
73
14.6
74
14.8
75
15
76
15.2
77
15.4
78
15.6
79
15.8
80
16
81
16.2
82
16.4
83
16.6
84
16.8
85
17
86
17.2
87
17.4
88
17.6
89
17.8
90
18
91
18.2
92
18.4
93
18.6
94
18.8
95
19
96
19.2
97
19.4
98
19.6
99
19.8
100
20
101
21
102
22
103
23
24
41
105
25
106
26
42
107
27
108
28
109
29
110
30
111
31
112
32
113
33
44
DMX CONTROL
13.8
70
104
43
24
= Seconds
(unless noted)
114
34
45
115
35
116
36
46
117
37
118
38
119
39
Sh wline
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
Table 6: SL STRIP 400 RGBW LED Luminaire Timing Channel Detail
% Value
DMX
47
100
48
49
40
121
41
122
42
123
43
124
44
125
45
126
46
127
47
50
128
48
129
49
51
130
50
131
51
132
52
52
133
53
134
54
53
135
55
136
56
137
57
54
138
58
139
59
55
140
60
141
61
142
62
56
143
63
144
64
57
145
65
146
66
147
67
58
148
68
149
69
59
150
70
151
71
60
Sh wline
= Seconds
(unless noted)
152
72
153
73
154
74
155
75
61
156
76
157
77
62
158
78
159
79
160
80
63
161
81
162
82
64
163
83
164
84
165
85
65
166
86
167
87
66
168
88
169
89
170
90
SL STRIP 400 RGBW LED Luminaire DMX Timing Channel Detail
25
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
Table 6: SL STRIP 400 RGBW LED Luminaire Timing Channel Detail
% Value
DMX
67
171
68
69
92
173
93
174
94
175
95
176
96
177
97
98
70
179
99
180
100
71
181
101
182
102
183
103
72
184
104
185
105
73
186
106
187
107
188
108
74
189
109
190
110
75
191
111
192
112
193
113
76
194
114
195
115
77
196
116
197
117
198
118
78
199
119
200
100
79
201
121
202
122
203
123
80
204
124
205
125
81
206
126
207
127
83
84
DMX CONTROL
91
172
178
82
26
= Seconds
(unless noted)
208
128
209
129
210
130
211
131
212
132
213
133
214
134
215
135
216
136
85
217
137
218
138
86
219
139
220
140
221
141
Sh wline
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
Table 6: SL STRIP 400 RGBW LED Luminaire Timing Channel Detail
% Value
DMX
87
222
88
89
= Seconds
(unless noted)
142
223
143
224
144
225
145
226
146
227
147
228
148
229
149
90
230
150
231
151
91
232
152
233
153
234
154
92
235
155
236
156
93
237
157
238
158
239
159
94
240
160
241
161
95
242
162
243
163
96
97
98
99
100
244
164
245
165
246
5 Minutes
247
15 Minutes
248
30 Minutes
249
60 Minutes
250*
60mS
251*
80mS
252*
100mS
253*
100mS
254*
140mS
255*
(default)
160mS
Note: * DMX values 250 to 255 provide smoothing when using console fade timing. DMX value 255 (recommended
default) will provide the smoothest timing.
5. SL STRIP 400 RGBW LED Luminaire RDM Parameter IDs
The following tables outline and describe all the RDM parameters IDs associated with SL STRIP 400 RGBW LED
Luminaires.
• Table 7, “SL STRIP 400 RGBW LED Luminaire RDM Product Parameters IDs,” on page 28"
• Table 8, “SL STRIP 400 RGBW LED Luminaire RDM UID,” on page 28"
• Table 9, “SL STRIP 400 RGBW LED Luminaire RDM Parameters IDs,” on page 28
• Table 10, “SL STRIP 400 RGBW LED Luminaire RDM Manufacturer Status IDs,” on page 30
Sh wline
SL STRIP 400 RGBW LED Luminaire RDM Parameter IDs
27
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
Table 11, “SL STRIP 400 RGBW LED Luminaire RDM Manufacturer Specific PIDs,”on page 30
Table 7: SL STRIP 400 RGBW LED Lu minaire RDM Product Parameters Ids
Model ID
Manufacturer
Model Description
Product Category
0x1100
Philips Entertain. Lighting Asia
SL STRIP 400 (RGBW)
0x0509
Table 8: SL STRIP 400 RGBW LED Luminaire RDM UID
UID
MSB of ESTA
50H
LSB of ESTA
41H
1st of
Unique Seq.
2nd of
Unique Seq.
3rd of
Unique Seq.
4th of
Unique Seq.
Table 9: SL STRIP 400 RGBW LED Luminaire RDM Parameters IDs
Get
Allowed
Set
Allowed
RDM Parameter IDs
Value
Comment
Implemented
Category - Network Management
DISC_UNIQUE_BRANCH
0x0001
■
DISC_MUTE
0x0002
■
DISC_UN_MUTE
0x0003
■
■
PROXIED_DEVICES
0x0010
■
PROXIED_DEVICES_COUNT
0x0011
COMMS_STATUS
0x0015
■
■
Category - Status Collection
■
QUEUED_MESSAGE
0x0020
■
■
STATUS_MESSAGES
0x0030
■
■
STATUS_ID_DESCRIPTION
0x0031
■
■
CLEAR_STATUS_ID
0x0032
■
■
SUB_DEVICE_STATUS_REPORT_THRESHOLD
0x0033
■
Category - RDM Information
■
SUPPORTED_PARAMETERS
0x0050
Support required only if
supporting Parameters
beyond the minimum required
set.
■
■
PARAMETER_DESCRIPTION
0x0051
Support required for
Manufacturer-Specific PIDs
exposed in SUPPORTED_
PARAMETERS message.
■
Category - Product Information
■
DEVICE_INFO
0x0060
■
PRODUCT_DETAIL_ID_LIST
0x0070
■
DEVICE_MODEL_DESCRIPTION
0x0080
■
■
MANUFACTURER_LABEL
0x0081
■
■
■
■
■
DEVICE_LABEL
0x0082
■
■
FACTORY_DEFAULTS
0x0090
LANGUAGE_CAPABILITIES
0x00A0
LANGUAGE
0x00B0
■
■
28
■
■
SOFTWARE_VERSION_LABEL
0x00C0
■
BOOT_SOFTWARE_VERSION_ID
0x00C1
DMX CONTROL
■
■
Sh wline
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
Table 9: SL STRIP 400 RGBW LED Luminaire RDM Parameters IDs
Get
Allowed
Set
Allowed
■
RDM Parameter IDs
Value
BOOT_SOFTWARE_VERSION_LABEL
0x00C2
Comment
Implemented
Category - DMX512 Setup
■
■
■
■
■
DMX_PERSONALITY
0x00E0
DMX_PERSONALITY_DESCRIPTION
0x00E1
■
■
Required if device uses a
DMX Slot
■
DMX_START_ADDRESS
0x00F0
■
SLOT_INFO
0x0120
■
■
SLOT_DESCRIPTION
0x0121
■
■
DEFAULT_SLOT_VALUE
0x0122
Category - Sensors 0x02xx
■
■
SENSOR_DEFINITION
0x0200
■
■
SENSOR_VALUE
0x0201
■
■
RECORD_SENSORS
0x0202
Category - Dimmer Settings 0x03xx - FUTURE USE
Category - Power / Lamp Settings 0x04xx
■
■
■
■
DEVICE_HOURS
0x0400
■
LAMP_HOURS
0x0401
■
LAMP_STRIKES
0x0402
■
■
LAMP_STATE
0x0403
■
■
LAMP_ON_MODE
0x0404
■
■
DEVICE_POWER_CYCLES
0x0405
Category - Display Settings 0x05xx
■
■
DISPLAY_INVERT
0x0500
■
■
DISPLAY_LEVEL
0x0501
■
Category - Configuration 0x06xx
■
■
■
■
TILT_INVERT
0x0601
■
■
PAN_TILT_SWAP
0x0602
■
■
REAL_TIME_CLOCK
0x0603
PAN_INVERT
0x0600
Category - Control 0x10xx
■
■
IDENTIFY_DEVICE
0x1000
■
RESET_DEVICE
0x1001
■
■
POWER_STATE
0x1010
■
■
PERFORM_SELFTEST
0x1020
SELF_TEST_DESCRIPTION
0x1021
■
■
■
CAPTURE_PRESET
0x1030
■
PRESET_PLAYBACK
0x1031
Sh wline
■
SL STRIP 400 RGBW LED Luminaire RDM Parameter IDs
29
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
Table 10: SL STRIP 400 RGBW LED Luminaire RDM Manufacturer Status IDs
Manufacturer Specific messages are in the range of 0x8000 - 0xFFDF. Each Manufacturer-specific Status ID shall have a
unique meaning, which shall be consistent across all products having a given Manufacturer ID. See Table B-2, ANSI E1.202010.
Status ID Message
Value
Data Value 1
Data Value 2
Status ID Description
00H
00H
ALL OK
8100H
Table 11: SL STRIP 400 RGBW LED Luminaire RDM Manufacturer Specific PIDs
Get
Allowed
Set
Allowed
RDM
Parameter IDs
Type
Length
Unit
Prefix
Min
Max
Default
Description
Category - Manufacturer Defined PIDs - Range is 0x8000-0xffdf (See ANSI E1.20-2010 Standard, Table A-3)
30
■
■
8A00H
U8
1
None
None
0
100
100
DIMMER
■
■
8A04H
U8
1
None
None
0
100
100
Dimmer RED
■
■
8A05H
U8
1
None
None
0
100
100
Dimmer GREEN
■
■
8A06H
U8
1
None
None
0
100
100
Dimmer BLUE
■
■
8A07H
U8
1
None
None
0
100
100
Dimmer WHITE
■
■
8AB2H
U8
1
None
None
1
18
1
Chase
■
■
8AB0H
U8
1
None
None
0
43
0
Color Filter
■
■
8AB1H
U8
1
None
None
0
31
0
Preset
■
■
8A92H
U8
1
None
None
0
255
0
Strobe
■
■
8A94H
U8
1
None
None
0
255
0
Duration
■
■
8AC0H
U8
1
None
None
0
255
255
Intensity Timing
■
■
8AC2H
U8
1
None
None
0
255
255
Color Timing
■
■
8A40H
U8
1
None
None
0
1
0
Link Mode
■
■
8A42H
U8
1
None
None
0
1
0
Incandescent Effect
■
■
8AA1H
U8
1
None
None
0
3
0
Dimming Curve
■
■
8A0CH
U8
1
None
None
0
3
0
DMX Fail Mode
■
■
8AA0H
U8
1
None
None
0
4
0
Backlight Off Time
■
■
8AA2H
U8
1
None
None
0
94
0
Power Up Setup
■
■
8A44H
U8
1
None
None
0
1
0
Calibration ON/OFF
Setup
■
■
8A41H
U8
1
None
None
0
1
0
Lock Fixture
DMX CONTROL
Sh wline
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
CLEANING AND CARE
WARNING! All cleaning should be performed with power completely removed from the luminaire. Never remove
protective covers when luminaire is powered. Wear appropriate protective eye wear and gloves when cleaning the
fixture. All service and maintenance, other than described herein, should be performed by a qualified technician or
Authorized Service Center.
1. Special Cleaning and Care Instructions
Being a solid-state fixture, and unlike most fixtures, the SL STRIP 400 RGBW LED Luminaire requires very little
routine maintenance by the user. This section covers portions of the luminaire that can be removed for cleaning.
The SL STRIP 400 RGBW LED Luminaire special care when it comes to cleaning front lens assembly. Additional
care needs to be taken with the plastic components because they are much easier to scratch or damage than glass.
The following is a list of cleaning materials required to care for your SL STRIP 400 RGBW LED Luminaire:
• Lint free lens tissue
• Lint or powder free gloves
• Reagent grade isopropyl alcohol*
• A mild soap solution.
Note: *Reagent grade isopropyl alcohol is good to use on the SL STRIP 400 RGBW LED Luminaire plastic optics
with anti-reflection coatings.
If the lens is still dirty after using isopropyl alcohol, for instance if fingerprints or oil is just redistributed and not
cleaned off the optic, then a mild soap and water solution can be used to gently wash the lens. Repeat the cleaning
with isopropyl alcohol to eliminate streaks and soap residue.
WARNING! Under no circumstances should ammonia-based cleaners, acetone, or other harsh solvents be used on or
near the SL STRIP 400 RGBW LED Luminaire. These types of cleaners or solvents can permanently damage the
optics or housings of the fixture.
If you have any questions regarding the use or care of your SL STRIP 400 RGBW LED Luminaire, please contact
Showline technical support or your local Authorized Dealer.
2. Front Lens Cleaning
To clean the front lens:
Step 1. Disconnect luminaire from power and allow to cool completely.
Step 2. Apply a small amount of reagent grade isopropyl alcohol to lint-free lens tissue.
Step 3. Wipe all debris, dirt, fingerprints, etc. from lens.
Step 4. Using a second lint-free lens tissue, wipe off any alcohol residue.
3. Service and Maintenance
For all other service and maintenance issues, please contact your local Showline office or an Authorized Service
Center.
WARNING! Disassembly (other than as described herein), alterations, unauthorized service, etc. will void the
product warranty. Contact your local Showline office or an Authorized Service Center for technical support and
service.
Sh wline
Special Cleaning and Care Instructions
31
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
TECHNICAL SPECIFICATIONS
1. SL STRIP 400 RGBW LED Luminaire Operational Specifications
Source:
Beam Angle:
Light Output:
Color Temperature:
Input Voltage (AC):
Current (AC):
Frequency:
Control Protocols:
Ambient Temperature:
Humidity:
Cooling:
Weight:
Housing:
Compliance:
IP Rating:
RGBW LED Array (x36 - 9 Red / 9 Green / 9 Blue / 9 White - all 600 mA)
10 Degrees
> 2,300 lumens
2700 - 6500K (user adjustable)
100V to 240V (+/- 10%, auto-ranging)
0.95 Amps (100V) / 0.40 Amps (240V)
50/60Hz
DMX512 (1990) / DMX512A (RDM) / On-Board Menu
-20 to 40 Degrees C (-4 to 104 Degrees F)
5%-95% Non condensing
Natural Convection
15.0 lbs (6.8 kg) - Luminaire only (no accessories)
Die Cast Aluminium with Powder Coating
CE Marked (International models)
IP20
Note: Common model specifications shown. For specific model specifications, features, and accessories, refer to the
product specification sheet for more details.
2. SL STRIP 400 RGBW LED Luminaire Dimensions
End View
Side View
132.5 mm /
5.2 in.
87.7 mm /
3.5 in.
Bottom View
70 mm /
2.76 in.
207.4 mm / 8.17 in.
439 mm / 17.28 in.
92 mm /
3.6 in.
207.4 mm / 8.17 in.
954 mm / 37.6 in.
1000 mm / 39.4 in.
32
SL STRIP 400 RGBW Luminaire Operational Specifications
Sh wline
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
Notes
Sh wline
SL STRIP 400 RGBW LED Luminaire Dimensions
33