User’s Manual
MX67QM
Industrial Mini ITX Motherboard
WWW.BCMCOM.COM
■■ Preface
Copyright Notice
The material in this document is the intellectual property of BCM Advanced
Research. We take every care in the preparation of this document, but no
guarantee is given as to the correctness of its contents. Our products are
under continual improvement and we reserve the right to make changes
without notice.
Trademarks
All trademarks are the properties of their respective owners.
■■
■■
■■
■■
■■
■■
■■
■■
■■
BCM® is registered trademark of BCM Advanced Research.
NVIDIA® is registered trademark of NVIDIA Corporation.
ATI® is registered trademark of ATI Technologies, Inc.
AMD® is registered trademarks of AMD Corporation.
Intel® is registered trademarks of Intel Corporation.
Windows® is registered trademarks of Microsoft Corporation.
AMI® is registered trademark of Advanced Micro Devices, Inc.
Award® is a registered trademark of Phoenix Technologies Ltd.
Realtek® is registered trademark of Realtek Semiconductor
Corporation.
Revision History
Revision
Revision History
Date
V1.1
For PCB v1.x
August, 2011
Technical Support
If a problem arises with your system and no solution can be obtained from
the user’s manual, please contact your place of purchase or local distributor.
Alternatively, please try the following help resources for further guidance.
■■
Visit the BCM website for technical guide, BIOS updates, driver
updates, and other information: http://www.BCM.com/bcm_support_
drivers.htm
◙◙
ii
Contact our technical staff at: http://www.bcmcom.com/bcm_
inquiries_techSupport.htm
MX67QM
Safety Instructions
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
Always read the safety instructions carefully.
Keep this User’s Manual for future reference.
Keep this equipment away from humidity.
Lay this equipment on a reliable flat surface before setting it up.
The openings on the enclosure are for air convection hence protects the
equipment from overheating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.
Place the power cord such a way that people can not step on it. Do not
place anything over the power cord.
Always Unplug the Power Cord before inserting any add-on card or module.
All cautions and warnings on the equipment should be noted.
Never pour any liquid into the opening that could damage or cause
electrical shock.
If any of the following situations arises, get the equipment checked by
service personnel:
◯◯ The power cord or plug is damaged.
◯◯ Liquid has penetrated into the equipment.
◯◯ The equipment has been exposed to moisture.
◯◯ The equipment does not work well or you can not get it work according
to User’s Manual.
◯◯ The equipment has dropped and damaged.
◯◯ The equipment has obvious sign of breakage.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
UNCONDITIONED, STORAGE TEMPERATURE ABOVE 60oC (140oF), IT
MAY DAMAGE THE EQUIPMENT.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
警告使用者:
這是甲類資訊產品,在居住的環境中使用時,可能會造成無線電干擾,在這種情
況下,使用者會被要求採取某些適當的對策。
廢電池請回收
For better environmental protection, waste batteries should be
collected separately for recycling or special disposal.
iii
■■ Preface
CE Conformity
Hereby, BCM Advanced Research declares that this device is
in compliance with the essential safety requirements and other
relevant provisions set out in the European Directive.
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the measures
listed below:
■■
■■
■■
■■
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
NOTICE 1
The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTICE 2
Shielded interface cables and AC power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1.
this device may not cause harmful interference, and
2.
this device must accept any interference received, including interference
that may cause undesired operation.
iv
MX67QM
WEEE Statement
ENGLISH
To protect the global environment and as an environmentalist, BCM must
remind you that:
Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment,
Directive 2002/96/EC, which takes effect on August 13, 2005, products of “electrical and
electronic equipment” cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end
of their useful life. BCM will comply with the product take back requirements at the end of
life of BCM-branded products that are sold into the EU. You can return these products to
local collection points.
DEUTSCH
Hinweis von BCM zur Erhaltung und Schutz unserer Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektround Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. BCM hat
europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich
an einer lokalen Altgerätesammelstelle in Ihrer Nähe.
FRANÇAIS
En tant qu’écologiste et afin de protéger l’environnement, BCM tient à rappeler ceci:
Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques
et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits
électriques et électroniques ne peuvent être déposés dans les décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer
certains produits en fin de vie. BCM prendra en compte cette exigence relative au retour
des produits en fin de vie au sein de la communauté européenne. Par conséquent vous
pouvez retourner localement ces matériels dans les points de collecte.
РУССКИЙ
Компания BCM предпринимает активные действия по защите окружающей среды,
поэтому напоминаем вам, что:
В соответствии с директивой Европейского Союза (ЕС) по предотвращению
загрязнения окружающей среды использованным электрическим и электронным
оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13 августа 2005
года, изделия, относящиеся к электрическому и электронному оборудованию, не могут
рассматриваться как бытовой мусор, поэтому производители вышеперечисленного
электронного оборудования обязаны принимать его для переработки по окончании
срока службы. BCM обязуется соблюдать требования по приему продукции,
проданной под маркой BCM на территории EC, в переработку по окончании срока
службы. Вы можете вернуть эти изделия в специализированные пункты приема.
v
■■ Preface
ESPAÑOL
BCM como empresa comprometida con la protección del medio ambiente, recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos
electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están
obligados a hacerse cargo de dichos productos al termino de su período de vida. BCM
estará comprometido con los términos de recogida de sus productos vendidos en la
Unión Europea al final de su periodo de vida. Usted debe depositar estos productos
en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una
empresa autorizada para la recogida de estos residuos.
NEDERLANDS
Om het milieu te beschermen, wil BCM u eraan herinneren dat:
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische
en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten
worden verplicht om producten retour te nemen aan het eind van hun levenscyclus.
BCM zal overeenkomstig de richtlijn handelen voor de producten die de merknaam BCM
dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op
lokale inzamelingspunten.
SRPSKI
Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj
sredini, BCM mora da vas podesti da:
Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju
pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i
proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog
uobičajenog veka trajanja. BCM će poštovati zahtev o preuzimanju ovakvih proizvoda
kojima je istekao vek trajanja, koji imaju BCM oznaku i koji su prodati u EU. Ove proizvode možete vratiti na lokalnim mestima za prikupljanje.
POLSKI
Aby chronić nasze środowisko naturalne oraz jako firma dbająca o ekologię, BCM przypomina, że:
Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia
2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani
do odbierania ich w momencie gdy produkt jest wycofywany z użycia. BCM wypełni
wymagania UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia. Produkty BCM będzie można zwracać w wyznaczonych punktach
zbiorczych.
vi
MX67QM
TÜRKÇE
Çevreci özelliğiyle bilinen BCM dünyada çevreyi korumak için hatırlatır:
Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve
elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların
üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü
olacaktır. Avrupa Birliği’ne satılan BCM markalı ürünlerin kullanım süreleri bittiğinde
BCM ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz.
ČESKY
Záleží nám na ochraně životního prostředí - společnost BCM upozorňuje:
Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků
2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické
výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se
tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení jejich životnosti. Společnost BCM splní požadavky na odebírání výrobků značky BCM,
prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat
v místních sběrnách.
MAGYAR
Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve
az BCM emlékezteti Önt, hogy:
Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és
elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen
elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére
azok hasznos élettartama végén. Az BCM betartja a termékvisszavétellel kapcsolatos
követelményeket az BCM márkanév alatt az EU-n belül értékesített termékek esetében,
azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.
ITALIANO
Per proteggere l’ambiente, BCM, da sempre amica della natura, ti ricorda che:
In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici
ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti
alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come
rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla
fine del suo ciclo di vita. BCM si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati
BCM che sono stati venduti all’interno dell’Unione Europea alla fine del loro ciclo di vita.
È possibile portare i prodotti nel più vicino punto di raccolta
vii
■■ Preface
CONTENTS
Copyright Notice��������������������������������������������������������������������������������� ii
Trademarks����������������������������������������������������������������������������������������� ii
Revision History���������������������������������������������������������������������������������� ii
Safety Instructions����������������������������������������������������������������������������� iii
CE Conformity������������������������������������������������������������������������������������ iv
FCC-B Radio Frequency Interference Statement������������������������������ iv
WEEE Statement��������������������������������������������������������������������������������v
Chapter 1 Overview������������������������������������������������������������������������������� 1-1
Mainboard Specifications���������������������������������������������������������������� 1-2
Mainboard Layout��������������������������������������������������������������������������� 1-4
Chapter 2 Hardware Setup������������������������������������������������������������������� 2-1
Quick Components Guide��������������������������������������������������������������� 2-2
CPU������������������������������������������������������������������������������������������������ 2-3
Memory������������������������������������������������������������������������������������������� 2-4
Power Supply���������������������������������������������������������������������������������� 2-5
Back Panel I/O�������������������������������������������������������������������������������� 2-6
Connector��������������������������������������������������������������������������������������� 2-9
Jumper������������������������������������������������������������������������������������������ 2-16
Slot������������������������������������������������������������������������������������������������ 2-18
Chapter 3 BIOS Setup��������������������������������������������������������������������������� 3-1
Entering Setup�������������������������������������������������������������������������������� 3-2
The Menu Bar��������������������������������������������������������������������������������� 3-4
Main������������������������������������������������������������������������������������������������ 3-5
Advanced���������������������������������������������������������������������������������������� 3-7
Boot����������������������������������������������������������������������������������������������� 3-15
Security����������������������������������������������������������������������������������������� 3-16
Chipset������������������������������������������������������������������������������������������ 3-22
Power�������������������������������������������������������������������������������������������� 3-24
Save & Exit����������������������������������������������������������������������������������� 3-26
viii
1
Chapter 1
Overview
The MX67QM is an Intel® QM67 Mini ITX Motherboard which
supports the 2nd generation Intel® Core™ i7, i5, i3 Mobile
processors providing advanced computing and graphics
performance for gaming, POS, digital signage and server
market segment
Based on the innovative Intel® Cougar Point chipset for optimal system efficiency, the MX67QM accommodates the Mobile Intel® Core i3/ i5/ i7/ Celeron/ Pentium processor in socket
PGA989 and supports up to 2 DDR3 1066/1333/1600 SO-DIMM
slots to provide the maximum of 8GB memory capacity.
In the advanced-level and mid-range market segment, the
MX67QM provides a high-performance solution for today’s
front-end and general purpose workstation, as well as in the
future.
■■ Overview
MX67QM Specifications
CPU
■■ Mobile Intel Core i3/ i5/ i7/ Celeron/ Pentium processor (below 45 Watt) in socket PGA989
Chipset
■■ North Bridge: integrated with CPU
■■ South Bridge: Intel Cougar Point chipset
Memory
■■ 2 DDR3 1066/1333/1600 SO-DIMM slots
■■ Supports the maximum of 8GB
LAN
■■ LAN 1: Intel® 82579LM PHY Gigabit LAN Controller
■■ LAN 2: Intel® 82574L PCIe Gigabit LAN Controller
Audio
■■ Realtek® ALC887 HD Audio
■■ Audio Interface: Line-out, Mic-in, Line-in, 1 x SPDIF
Header, 1 x Front Audio Header, 1 x Amplifier
Header
■■ 3 Watt/Channel Amplifier
Graphics
■■ Intel Gen6.0 integrated Graphics Engine
■■ Up to QXGA (2048 x 1536) resolution
Expansion
Interface
■■ 1 x PCI Express x16
■■ 1 x Mini PCI Express
■■ 1 x Compact Flash socket by Intel Cougar Point
RAID
■■ SATA1~4 support Intel Rapid Storage
Technology
■■ (AHCI/ RAID 0/ 1/ 5/ 10) by Intel Cougar Point
■■ Supports SSD caching for system acceleration
Back I/O
Panel
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
1-2
1 x PS/2 mouse port
1 x PS/2 keyboard port
1 x VGA port
1 x DVI-D port
1 x COM port
1 x HDMI port
2 x Gigabit LAN jacks
2 x USB 2.0 ports
2 x USB 3.0 ports
1 x Line-In audio jack
1 x Line-Out audio jack
1 x Mic-In audio jack
MX67QM
Onboard I/O
Headers
■■
■■
■■
■■
■■
■■
■■
■■
Form Factor
■■ 6.7” (L) x 6.7” (W)
Power Type
■■ 20 + 4-pin ATX Power
Mechanical
and
Environment
■■ Operating Temperature: -10oC to 60oC
■■ Storage Temperature: -20oC to 80oC
■■ Humidity: 0% ~ 90% RH, Non-Condensing
2 x USB 2.0 pinheaders (4 ports)
1 x Amplifier pinheader
4 x COM port connectors
1 x GPIO pinheader
1 x LVDS connector
1 x Front audio pinheader
1 x Chassis intrusion pinheader
1 x SPDIF pinheader
1-3
■■ Overview
Mainboard Layout
Amplifier
Pinheader
COM Power Jumper
PCIe Slot
Power Connector
DIMM Slot
GPIO
Pinheader
Chassis Intrusion
Pinheader
LVDS Inverter
Connector
Fan Power
Connector
LVDS
Connector
Port 80
Pinheader
Front Panel
Pinheader LVDS Power
Jumper
Power
Connector
S/PDIF
Pinheader
USB
Pin-header
AT/ATX
Jumper
Front Audio
Pinheader
Mouse Port
VGA Port
Keyboard
Port
DVI-D Port
1-4
COM Power
Jumper
Serial Port Connector
Mini PCIe Slot
SATA Connector
Clear CMOS
Jumper
Serial Port
LAN Jack
HDMI Port
USB 2.0
Port
LAN Jack Line-In Jack
USB 3.0
Port
Line-Out Jack
Mic-In Jack
2
Chapter 2
Hardware Setup
This chapter provides you with the information on mainboard hardware configurations. Incorrect setting of jumpers and connectors
may damage your mainboard. Please pay special attention not
to connect these headers in wrong direction. DO NOT adjust any
jumper while the mainboard is powered on.
■■ Hardware Setup
Quick Components Guide
Amplifier
Pinheader,
p.2-10
COM Power Jumper,
p.2-17
PCIe Slot,
p.2-18
Power Connector,
p.2-5
DIMM Slot, p.2-4
GPIO
Pinheader, p.2-11
Chassis Intrusion
Pinheader, p.2-9
Fan Power
Connector,
p.2-10
LVDS Inverter
Connector, p.2-14
LVDS
Connector,
p.2-5
Front Panel
LVDS
Power
Pinheader,
Jumper,
p.2-11
p.2-17
Port 80
Pinheader
, p.2-15
Power
Connector,
p.2-5
S/PDIF
Pinheader,
p.2-15
AT/ATX
Jumper,
p.2-17
USB Pin-header, COM Power
Serial Port Connector, p.2-13
p.2-12
Jumper,
Mini PCIe Slot, p.2-18
p.2-17
SATA Connector, p.2-9
Clear CMOS Jumper, p.2-16
Front Audio Pinheader, p.2-15
Back I/O, p.2-5
Mouse Port
VGA Port
Keyboard
Port
DVI-D Port
2-2
Serial Port
LAN Jack
HDMI Port
USB 2.0
Port
LAN Jack Line-In Jack
USB 3.0
Port
Line-Out Jack
Mic-In Jack
MX67QM
CPU
▶▶ Installing the CPU
Important
• On the upper end of the CPU socket is a socket actuator in the form of a
slotted screw head. Make sure that you open or close the socket with a
flathead screwdriver before and after installing the CPU.
• When installing the CPU, make sure the cooler set is installed as well
and can work properly to protect the CPU from overheating. For proper
CPU cooler type, please consult the dealer.
1.
Turn the socket actuator counterclockwise to open the socket.
2.
Place the CPU on top of the socket. Make sure that the gold arrow on
the CPU is aligned with the arrow key on the socket.
3.
Push the CPU gently down until its pins securely fit into the socket.
4.
Turn the socket actuator clockwise to close the socket and secure the
CPU in place.
2-3
■■ Hardware Setup
Memory
▶▶ Installing Memory Modules
1.
Locate the SO-DIMM slot. Align the notch on the DIMM with the key on
the slot and insert the DIMM into the slot.
2.
Push the DIMM gently downwards until the slot levers click and lock
the DIMM in place.
3.
To uninstall the DIMM, flip the slot levers outwards and the DIMM will
be released instantly.
Important
You can barely see the golden finger if the memory module is properly inserted in the DIMM slot.
2-4
MX67QM
Power Supply
ATX Power Connector: ATX1
This connector provides power to the system.
V
5
.+ V nd
0 5
2 .+ 5V ou nd
9
1 8.- Gr ou nd #
1 7. Gr ou N
1 6. Gr -O nd
1 5. PS ou
1 4. r V V
1 .G 12 .3
3
1 2.- +3
1 1.
1
V
2
1 B
.+ S K
0 V
1 .5 R O nd
9
u V
W ro 5 d
.+ n
.P
8 7.G 6 ou 5V
r + nd
.G . u V
5 4 o .3 V
r
.G 3 .3
3 2.+ +3
.
1
DC Power Connector: JPWR1
This connector provides 12V DC power input.
d
n
u d
ro un
.G ro
1 .G
2
r
e
w r
o e
P ow
C P
.D C
3 .D
4
2-5
■■ Hardware Setup
Back Panel I/O
Mouse Port
VGA Port
Keyboard
Port
DVI-D Port
Serial Port
LAN Jack
HDMI Port
USB 2.0
Port
LAN Jack Line-In Jack
USB 3.0
Port
Line-Out Jack
Mic-In Jack
▶▶Mouse/Keyboard Port
The standard PS/2 mouse/keyboard DIN connector is for a PS/2 mouse/
keyboard.
▶▶VGA Port
The DB15-pin female connector is provided for monitor.
▶▶DVI-D Port
The DVI-D (Digital Visual Interface-Digital) connector allows you to connect
an LCD monitor. It provides a high-speed digital interconnection between
the computer and its display device. To connect an LCD monitor, simply
plug your monitor cable into the DVI connector, and make sure that the other
end of the cable is properly connected to your monitor (refer to your monitor
manual for more information.)
2-6
MX67QM
▶▶RS-232/422/485 Serial Port Connector (Optional)
The serial port is a 16550A high speed communications port that sends/
receives 16 bytes FIFOs. You can attach a serial mouse or other serial
devices directly to the connector.
RS-232
PIN
SIGNAL
DESCRIPTION
1
2
3
4
5
6
7
8
9
DCD
RXD
TXD
DTR
GND
DSR
RTS
CTS
VCC_COM1
Data Carrier Detect
Receive Data
Transmit Data
Data Terminal Ready
Signal Ground
Data Set Ready
Request To Send
Clear To Send
Voltage select setting
by J1
RS-422
PIN
SIGNAL
DESCRIPTION
1
2
3
4
5
6
7
8
9
422 TXD422 RXD+
422 TXD+
422 RXDGND
NC
NC
NC
NC
Transmit Data, Negative
Receive Data, Positive
Transmit Data, Positive
Receive Data, Negative
Signal Ground
No Connection
No Connection
No Connection
No Connection
RS-485
PIN
SIGNAL
DESCRIPTION
1
2
3
4
5
6
7
8
9
485 TXDNC
485 TXD+
NC
GND
NC
NC
NC
NC
Transmit Data, Negative
No Connection
Transmit Data, Positive
No Connection
Signal Ground
No Connection
No Connection
No Connection
No Connection
2-7
■■ Hardware Setup
▶▶HDMI Port
The High-Definition Multimedia Interface (HDMI) is an all-digital audio/video
interface capable of transmitting uncompressed streams. HDMI supports
all TV format, including standard, enhanced, or high-definition video, plus
multi-channel digital audio on a single cable.
▶▶USB 2.0 Port
The USB 2.0 port is for attaching USB devices such as keyboard, mouse, or
other USB compatible devices. It supports data transfer rate up to 480Mbit/s
(Hi-Speed).
▶▶USB 3.0 Port
The USB 3.0 port is backward-compatible with USB 2.0 devices and supports data transfer rate up to 5 Gbit/s (SuperSpeed).
▶▶LAN
The standard RJ-45 LAN jack is for connection to the Local Area Network
(LAN). You can connect a network cable to it.
Activity Indicator
Speed Indicator
Left LED
(Active LED)
LED Color
No Transmission
10M Cable
Plug-in
100M Cable
Plug-in
1000M Cable
Plug-in
■■
■■
■■
2-8
Yellow
Green/Orange
Yellow (Lighting)
OFF
Transmission
Yellow (Blinking)
OFF
No Transmission
Yellow (Lighting)
Green (Lighting)
Transmission
Yellow (Blinking)
Green (Lighting)
No Transmission
Yellow (Lighting)
Orange (Lighting)
Transmission
Yellow (Blinking)
Orange (Lighting)
Yellow (Lighting)
OFF
In S3/S4/S5 Standby State
▶▶Audio Jack
Right LED
(100M/1000M Speed LED)
Line-In (Blue) - for external CD player or other audio devices
Line-Out (Green) - for speakers or headphones
Mic (Pink) - for microphones
MX67QM
Connector
Chassis Intrusion Pinheader: JCASE1
This connector is provided to connect the chassis intrusion switch cable. If
the chassis is opened, the chassis intrusion mechanism will be activated.
The system will record this status and show a warning message on the
screen. To clear the warning, you must enter the BIOS utility and clear the
record.
d
n
u RU
ro T
.G IN
2 .C
1
Serial ATA Connector: SATA1 ~ SATA4
This connector is a high-speed Serial ATA interface port. Each connector
can connect one Serial ATA device.
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise,
data loss may occur during transmission.
2-9
■■ Hardware Setup
Audio Amplifier Pinheader: JAMP1
The JAMP1 is used to connect audio amplifiers to enhance audio performance.
L
_ +
P L M P_ R +
.A M _ R
1 A MP _
.
2 .A MP
3 .A
4
Fan Power Connector: CPUFAN1, SYSFAN1
The fan power connector supports system cooling fan with +12V. When
connecting the wire to the connectors, always note that the red wire is the
positive and should be connected to the +12V; the black wire is Ground and
should be connected to GND. If the mainboard has a System Hardware
Monitor chipset onboard, you must use a specially designed fan with speed
sensor to take advantage of the CPU fan control.
d
n
u
ro 2V or
.G 1 s
1 .+ en
2 .S
3
d
n
u
ro 2V or l
.G 1 s o
1 .+ en ntr
2 .S o
3 .C
4
Important
• Please refer to the recommended CPU fans at processor’s official website or consult the vendors for proper CPU cooling fan.
• Fan cooler set with 3- or 4-pin power connector are both available for
CPUFAN1.
2-10
MX67QM
This connector is provided for the General-Purpose Input/Output (GPIO)
peripheral module.
GPIO Pinheader: JGPIO1
t7
u 6
p ut
D In p t 5
N IO In pu t 4
.G P IO In u 3
p
9
1 7.G P IO In ut 2
1 5.G P IO np ut 1
1 .G P I np ut 0
3
1 .G IO I np ut
P
11 .G PIO I np
9 .G IO I
Y
E 7
7 P IO
.G P 3
.K t
5 G C
0 u 6
.
2 tp ut 5
3 .VC
u p t
1
O ut u 4
t
p
IO O ut u 3
P IO O utp ut 2
.G P IO O utp ut 1
8
t
1 .G P IO O utp u 0
6
1 4.G P IO O utp ut 5
1 2.G P IO O tp C
1 .G P IO Ou VC
0
1 8.G P IO 2.
.G
6 GP
.
4
Front Panel Pinheader: JFP1
This front panel connector is provided for electrical connection to the front
panel switches & LEDs and is compliant with Intel Front Panel I/O Connectivity Design Guide.
in
P o W
.N S +
0 r_ W 1 e S D
w _ E +
o er L D
.P w r_ E
8 o e L
.P w r_
6 Po e
. w
4 o
.P
2
d
e +
rv SW se t_ W e e _S D +
.R s t E
9 .Re se _L ED
7 e D _L
.R
5 HD D
. D
3 .H
1
2-11
■■ Hardware Setup
Front USB Pinheader: JUSB1, JUSB2
This connector, compliant with Intel I/O Connectivity Design Guide, is ideal
for connecting high-speed USB interface peripherals such as USB HDD,
digital cameras, MP3 players, printers, modems and the like.
C
.N d
0 n
1 ou 1+
r B .G S 1
8 .U SB C
6 .U VC
4 2.
in
P nd
o u +
.N ro 0
9 .G SB 0B
7
.U
5 .US C
3 .VC
1
USB 2.0 Bracket (Optional)
Important
Note that the pins of VCC and GND must be connected correctly to avoid
Important
possible damage.
2-12
MX67QM
Serial Port Connector: COM2, COM3, COM4, COM5
This connector is a 16550A high speed communications port that sends/
receives 16 bytes FIFOs. You can attach a serial device to it through an
optional serial port bracket.
D
X R
.R T
2 D R
.
4 .DS TS
6 .C
8
M
O
C
_
C
C S
.V T
9 .R ND
7 G XD
.
5 .T CD
3 .D
1
PIN
SIGNAL
DESCRIPTION
1
2
3
4
5
6
7
8
9
DCD
RXD
TXD
DTR
GND
DSR
RTS
CTS
VCC_COM
Data Carrier Detect
Receive Data
Transmit Data
Data Terminal Ready
Signal Ground
Data Set Ready
Request To Send
Clear To Send
12V or 5V power output,
selected by JCMV2
2-13
■■ Hardware Setup
LVDS Inverter Connector: JINV1
The connector is provided for LCD backlight options.
l
o
tr le
V
2
D K on ab 0 N N
1 2V
D L
.+ 1 V V C t C n A 1 N
1 .+ 12 .3 _V _ h t E AT A 2
3 .+ 3 D C lig h D AT TA N
5 .+ C D k lig _ D A N 3
A
7 .L D c k 1
9 .L Ba ac S 1_ _D CK AT 0 N N
11 3. .B VD DS S1 1_ D TA 1 N
1 5 .L V D S 1_ A TA 2
A N
1 7 .L V D S
D
1 9 .L V D
_ A T 3
2 D A NA
1 1 L
2 3. LV ND S 2_ _D K T
2 5. .G VD S 2 _C DA
2 7 .L VD S 2 _
2 9 .L VD DS 2
S
2 1 L
3 3. .LV VD D
3 5 .L N
3 7 .G
3 9
3
V
2
1 2V
.+ 1 D
2 .+ N D
4 .G N D
6 .G D A
8 _V AT N
D D E D
C _ D N P
.L C D G 0 P
0 D V . A 1 P
1 D S_ 16 AT A 2 P
T K
.L
2 D D A A P
1 V _ D AT _C 3 D
.L 1 _
4 S 1 D 1 A N P
1 D S 1_ DS AT .G A0 P
V D S V D 28 T 1 P
A 2 P
_
.L V
8 L D .L 1 DA AT A K P
1 0. V 4 S
2 2.L 2 D 2_ _D AT _C 3 ND
2 LV S 2 _D S2 TA G
.
D S 2 D A 0.
6
2 .LV VD S V _D 4
0 L D .L 2
3 2. V 6 S
3 4.L 3 D
3 LV
.
8
3
2-14
#
L
R
T
C N
_ O
5 T L
C L B
C BK _
S
.V
5 L_ D
.
4 LV ND V
.
3 .G 2
2 .+1
1
LVDS Connector: JLVDS1
The LVDS (Low Voltage Differential Signal) connector provides a digital interface typically used with flat panels. After connecting an LVDS interface
flat panel to the JLVDS1, be sure to check the panel datasheet and set the
JVDD1 jumper to proper power voltage.
MX67QM
S/PDIF Pinheader: JSPDI1
This connector is used to connect S/PDIF (Sony & Philips Digital Interconnect Format) interface for digital audio transmission.
D F
N DI
.G P
3 .S C
2 VC
.
1
Front Audio Pinheader: JAUD1
This connector allows you to connect the front panel audio and is compliant
with Intel Front Panel I/O Connectivity Design Guide.
1
0
.H
e
n
io n
ct Pi n
te
e o tio #
D .N c E
e 8 te C nd
e N
n
o
D E rou
h
S
P
IC E .G
d
.M R 2
a
6 .P
4
L
e D
n
o N
h E R
P S e
d _ n
a E o
e NS Ph
.H
d
9 .SE a R
7 He IC L
.
5 M IC
.
3 .M
1
Port 80 Pinheader: JDP1
This pinheader is intended for Transport Control Protocol (TCP) port 80.
1
3
.L
C
_
F
R
B
S
V C3 RQ
.S
6 .VC EY D
8 .K N D
0
1 2.G N
1 4.G
1
I
.3
2 VC R 5
.
4 E C
#
.L
9 .LA E
M
11 A
P
M
P
T T#
I_ S 0
C R D 1
P _ LA D 2
_
.
K C 5 .LA D 3
L .LP
7 A D
.C 3
1
2-15
■■ Hardware Setup
Jumper
Clear CMOS Jumper: JCMOS1
There is a CMOS RAM onboard that has a power supply from an external
battery to keep the data of system configuration. With the CMOS RAM, the
system can automatically boot OS every time it is turned on. If you want to
clear the system configuration, set the jumper to clear data.
1
1
JCMOS1
Clear CMOS
1
Keep CMOS
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then return
to 1-2 pin position. Avoid clearing the CMOS while the system is on; it will
damage the mainboard.
2-16
MX67QM
AT/ATX Select Jumper: JAT1
This jumper allows users to select between AT and ATX power.
1
1
JAT1
1
AT Power
ATX Power
COM Port Power Jumper: J1, JCMV2
These jumpers specify the operation voltage of the onboard serial ports.
1
1
1
J1
(for COM1)
+5V
1
1
JCMV2
(for COM2~5)
+12V
+12V
1
+5V
LVDS Power Jumper: J2
Use this jumper to specify the operation voltage of the LVDS interface flat panel.
1
1
J2
+3.3V
1
+5V
2-17
■■ Hardware Setup
Slot
Mini PCI-E (Peripheral Component Interconnect Express) Slot
The Mini PCI-E slot is provided for wireless LAN card, TV tuner card, and
Robson NAND Flash card.
PCI-E (Peripheral Component Interconnect Express)
Slot
The PCIE slot supports the PCIE interface expansion card.
CompactFlash Socket
This socket supports CompactFlash cards.
Important
When adding or removing expansion cards, make sure that you unplug the
power supply first. Meanwhile, read the documentation for the expansion
card to configure any necessary hardware or software settings for the expansion card, such as jumpers, switches or BIOS configuration.
2-18
3
Chapter 3
BIOS Setup
This chapter provides information on the BIOS Setup program and
allows you to configure the system for optimum use.
You may need to run the Setup program when:
■■ An error message appears on the screen during the system booting up, and requests you to run SETUP.
■■ You want to change the default settings for customized
features.
■■ BIOS Setup
Entering Setup
Power on the computer and the system will start POST (Power On Self Test)
process. When the message below appears on the screen, press <DEL>
key to enter Setup.
Press DEL to enter SETUP
If the message disappears before you respond and you still wish to enter
Setup, restart the system by turning it OFF and On or pressing the RESET
button. You may also restart the system by simultaneously pressing <Ctrl>,
<Alt>, and <Delete> keys.
Important
The items under each BIOS category described in this chapter are under
continuous update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be held for
reference only.
3-2
MX67QM
Control Keys
←→
Select Screen
↑↓
Select Item
Enter
Select
+-
Change Option
F1
General Help
F7
Previous Values
F9
Optimized Defaults
F10
Save & Exit
Esc
Exit
Getting Help
After entering the Setup menu, the first menu you will see is the Main
Menu.
Main Menu
The main menu lists the setup functions you can make changes to. You can
use the arrow keys ( ↑↓ ) to select the item. The on-line description of the
highlighted setup function is displayed at the bottom of the screen.
Sub-Menu
If you find a right pointer symbol
appears to the left of certain fields that
means a sub-menu can be launched from this field. A sub-menu contains
additional options for a field parameter. You can use arrow keys ( ↑↓ ) to
highlight the field and press <Enter> to call up the sub-menu. Then you can
use the control keys to enter values and move from field to field within a
sub-menu. If you want to return to the main menu, just press the <Esc >.
General Help <F1>
The BIOS setup program provides a General Help screen. You can call up
this screen from any menu by simply pressing <F1>. The Help screen lists
the appropriate keys to use and the possible selections for the highlighted
item. Press <Esc> to exit the Help screen.
3-3
■■ BIOS Setup
The Menu Bar
▶▶ Main
Use this menu for basic system configurations, such as time, date, etc.
▶▶ Advanced
Use this menu to set up the items of special enhanced features.
▶▶ Boot
Use this menu to specify the priority of boot devices.
▶▶ Security
Use this menu to set supervisor and user passwords.
▶▶ Chipset
This menu controls the advanced features of the onboard chipsets.
▶▶ Power
Use this menu to specify your settings for power management.
▶▶ Save & Exit
This menu allows you to load the BIOS default values or factory default settings into the BIOS and exit the BIOS setup utility with or without changes.
3-4
MX67QM
Main
▶▶ System Date
This setting allows you to set the system date. The date format is <Day>,
<Month> <Date> <Year>.
▶▶ System Time
This setting allows you to set the system time. The time format is <Hour>
<Minute> <Second>.
▶▶ SATA1/ 2/ 3/ 4
[Type]
Press PgUp/<+> or PgDn/<-> to select
[Manual], [None] or [Auto] type. Note that the
specifications of your drive must match with
the drive table. The hard disk will not work
properly if you enter improper information for
this category. If your hard disk drive type is
not matched or listed, you can use [Manual] to
define your own drive type manually.
3-5
■■ BIOS Setup
[LBA/Large
Mode]
Enabling LBA causes Logical Block Addressing to be used in place of Cylinders, Heads
and Sectors
[Block
(Multi-Sector
Transfer)]
Any selection except Disabled determines the
number of sectors transferred per block
[PIO Mode]
Indicates the type of PIO (Programmed
Input/Output)
[DMA Mode]
Indicates the type of Ultra DMA
[S.M.A.R.T.]
This allows you to activate the S.M.A.R.T.
(Self-Monitoring Analysis & Reporting Technology) capability for the hard disks. S.M.A.R.T
is a utility that monitors your disk status to
predict hard disk failure. This gives you an
opportunity to move data from a hard disk that
is going to fail to a safe place before the hard
disk becomes offline.
[32 Bit Data
Transfer]
Enables 32-bit communication between CPU and IDE controller
▶▶ SATA Mode Selection
This setting specifies the SATA controller mode.
3-6
MX67QM
Advanced
▶▶ Quiet Boot
This BIOS feature determines if the BIOS should hide the normal POST
messages with the motherboard or system manufacturer’s full-screen logo.
When it is enabled, the BIOS will display the full-screen logo during the
boot-up sequence, hiding normal POST messages.
When it is disabled, the BIOS will display the normal POST messages, instead of the full-screen logo.
Please note that enabling this BIOS feature often adds 2-3 seconds of delay
to the booting sequence. This delay ensures that the logo is displayed for a
sufficient amount of time. Therefore, it is recommended that you disable this
BIOS feature for a faster boot-up time.
▶▶ Bootup NumLock State
This setting is to set the Num Lock status when the system is powered on.
Setting to [On] will turn on the Num Lock key when the system is powered
on. Setting to [Off] will allow users to use the arrow keys on the numeric
keypad.
3-7
■■ BIOS Setup
▶▶ Option ROM Messages
This item is used to determine the display mode when an optional ROM is
initialized during POST. When set to [Force BIOS], the display mode used
by AMI BIOS is used. Select [Keep Current] if you want to use the display
mode of optional ROM.
▶▶ PCI/PCIE Device Configuration
▶▶ PCI Latency Timer
This item controls how long each PCI device can hold the bus before
another takes over. When set to higher values, every PCI device can
conduct transactions for a longer time and thus improve the effective
PCI bandwidth. For better PCI performance, you should set the item
to higher values.
▶▶ USB Support
This setting enables/disables support for USB devices.
▶▶ Legacy USB Support
Set to [Enabled] if you need to use any USB 1.1/2.0 device in the operating system that does not support or have any USB 1.1/2.0 driver
installed, such as DOS and SCO Unix.
▶▶ Audio Controller
This setting enables/disables the onboard audio controller.
3-8
MX67QM
▶▶ Launch Intel 82579 OpROM, Launch Intel 82574 OpROM, Launch
JMB368 OpROM
This setting enables/disables the initialization of the onboard LAN Boot
ROM during bootup. Selecting [Disabled] will speed up the boot process.
▶▶ CPU Configuration
▶▶ Hyper Threading
The processor uses Hyper-Threading technology to increase transaction rates and reduces end-user response times. The technology treats
the two cores inside the processor as two logical processors that can
execute instructions simultaneously. In this way, the system performance is highly improved. If you disable the function, the processor will
use only one core to execute the instructions. Please disable this item if
your operating system doesn’t support HT Function, or unreliability and
instability may occur.
▶▶ Active Processor Cores
This setting specifies the number of active processor cores.
▶▶ Limit CPUID Maximum
The Max CPUID Value Limit BIOS feature allows you to circumvent
problems with older operating systems that do not support the Intel
Pentium 4 processor with Hyper-Threading Technology. When enabled,
the processor will limit the maximum CPUID input value to 03h when
queried, even if the processor supports a higher CPUID input value.
When disabled, the processor will return the actual maximum CPUID
input value of the processor when queried.
3-9
■■ BIOS Setup
▶▶ Execute Disable Bit
Intel’s Execute Disable Bit functionality can prevent certain classes of malicious “buffer overflow” attacks when combined with a supporting operating
system. This functionality allows the processor to classify areas in memory
by where application code can execute and where it cannot. When a malicious worm attempts to insert code in the buffer, the processor disables
code execution, preventing damage or worm propagation.
▶▶ Intel Virtualization Technology
Virtualization enhanced by Intel Virtualization Technology will allow a platform to run multiple operating systems and applications in independent
partitions. With virtualization, one computer system can function as multiple “virtual” systems.
▶▶ EIST
EIST (Enhanced Intel SpeedStep Technology) allows the system to dynamically adjust processor voltage and core frequency, which can result
in decreased average power consumption and decreased average heat
production.
▶▶ Turbo Mode
Intel Turbo Memory is a new Intel platform technology that uses non-volatile memory (Flash memory) to increase system responsiveness, make
multi-tasking faster, and extend battery life. This technology is poised to
eliminate many of the bottlenecks associated with HDD latency. By enabling the majority of application workload to be written and read from
a system cache instead of the HDD, Turbo Memory will offer users significantly increased performance -- particularly in application load and run
time, the speed in which systems resume operation after hibernation or
boot, and in system-level power usage.
3-10
MX67QM
▶▶ Super IO Configuration
▶▶ Serial Port 1/ 2/ 3/ 4/ 5
This setting enables/disables the specified serial port.
▶▶ Change Settings
This setting is used to change the address & IRQ settings of the
specified serial port.
▶▶ Mode Select
Select an operation mode for the serial port 1.
▶▶ Watch Dog Timer
You can enable the system watch-dog timer, a hardware timer that
generates a reset when the software that it monitors does not respond as expected each time the watch dog polls it.
3-11
■■ BIOS Setup
▶▶ H/W Monitor
These items display the current status of all monitored hardware devices/
components such as voltages, temperatures and all fans’ speeds.
3-12
MX67QM
▶▶ Smart Fan Configuration
▶▶ Smart FAN1 / FAN2 Function
This setting enables/disables the Smart Fan function. Smart Fan
is an excellent feature which will adjust the CPU/system fan speed
automatically depending on the current CPU/system temperature,
avoiding the overheating to damage your system.
3-13
■■ BIOS Setup
▶▶ GPIO Group Configuration
▶▶ GP 01/ 02/ 03/ 04/ 05/ 06/ 07/ 08
This setting controls the operation mode of the specified GPIO.
3-14
MX67QM
Boot
▶▶ Boot Option #1 / #2 / #3 / #4
This setting allows users to set the sequence of boot devices where BIOS
attempts to load the disk operating system.
▶▶ CD/DVD ROM Drive BBS Priorities, Hard Drive BBS Priorities
This setting allows users to set the priority of the specified devices. First
press <Enter> to enter the sub-menu. Then you may use the arrow keys ( ↑
↓ ) to select the desired device, then press <+>, <-> or <PageUp>, <PageDown> key to move it up/down in the priority list.
3-15
■■ BIOS Setup
Security
▶▶ Administrator Password
Administrator Password controls access to the BIOS Setup utility.
▶▶ User Password
User Password controls access to the system at boot and to the BIOS Setup
utility.
▶▶ Chassis Intrusion
The field enables or disables the feature of recording the chassis intrusion
status and issuing a warning message if the chassis is once opened. To
clear the warning message, set the field to [Reset]. The setting of the field
will automatically return to the default value later.
3-16
MX67QM
▶▶ Trusted Computing
▶▶ TPM Support
This setting controls the Trusted Platform Module (TPM) designed by
the Trusted Computing Group (TCG). TPMs are special-purpose integrated circuits (ICs) built into a variety of platforms to enable strong
user authentication and machine attestation - essential to prevent inappropriate access to confidential and sensitive information and to protect
against compromised networks.
3-17
■■ BIOS Setup
▶▶ Intel TXT(LT) Configuration
▶▶ Secure Mode Extensions (SMX)
This setting enables/disables the Secure Mode Extensions.
▶▶ Intel TXT(LT) Support
Intel TXT (Trusted Execution Technology) can only be enabled/disabled
if SMX is enabled. VT and VT-d support must also be enabled prior
to TXT.
3-18
MX67QM
▶▶ PCH-FW Configuration
▶▶ ME FW Version, ME Firmware Mode/ Type/ Sku
These settings show the firmware information of the Intel ME (Management Engine).
▶▶ Firmware Update Configuration
Press [Enter] to view the firmware update configuration.
3-19
■■ BIOS Setup
▶▶ AMT Configuration
Intel Active Management Technology (AMT) is hardware-based technology
for remotely managing and securing PCs out-of-band.
3-20
MX67QM
▶▶ Serial Port Console Redirection
▶▶ Console Redirection
Console Redirection operates in host systems that do not have a monitor and keyboard attached. This setting enables/disables the operation of console redirection. When set to [Enabled], BIOS redirects and
sends all contents that should be displayed on the screen to the serial
COM port for display on the terminal screen. Besides, all data received
from the serial port is interpreted as keystrokes from a local keyboard.
3-21
■■ BIOS Setup
Chipset
▶▶ Primary Display
This setting specifies which graphics device will be used as the primary
display.
▶▶ Internal Graphics
This setting specifies the size of system memory allocated for video memory.
▶▶ GTT Size
This setting specifies the GTT size.
▶▶ Aperture Size
This setting controls just how much system RAM can be allocated for video
purposes. The aperture is a portion of the PCI memory address range dedicated to graphics memory address space.
▶▶ DVMT Pre-Allocated, DVMT Total Gfx Mem
This setting specifies the memory size for DVMT.
3-22
MX67QM
▶▶ Primary Boot Display
Use the field to select the type of device you want to use as the boot display
of the system.
▶▶ LCD Panel Type, Panel Scaling, Panel Color Depth
This setting allows you to set your preferences for the boot display device.
3-23
■■ BIOS Setup
Power
▶▶ ACPI Sleep State
This item specifies the power saving modes for ACPI function. If your operating system supports ACPI, you can choose to enter the Standby mode in
S1 (POS) or S3 (STR) fashion through the setting of this field.
▶▶ Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure
or interrupt occurs. Available settings are:
[Power Off]
Leaves the computer in the power off state.
[Power On]
Leaves the computer in the power on state.
[Last State]
Restores the system to the previous status before
power failure or interrupt occurred.
▶▶ Resume On USB from S3/S4
The item allows the activity of the USB device to wake up the system from
S3/S4 sleep state.
3-24
MX67QM
▶▶ Resume On 82579 LAN
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onboard LAN is detected.
▶▶ Resume On PCIE PME
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onboard PCIE PME is detected.
▶▶ Resume On RTC
When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.
3-25
■■ BIOS Setup
Save & Exit
▶▶ Save Changes and Exit
Save changes to CMOS and exit the Setup Utility.
▶▶ Discard Changes and Exit
Abandon all changes and exit the Setup Utility.
▶▶ Save Changes and Reset
Save changes to CMOS and reset the system.
▶▶ Discard Changes
Abandon all changes and continue with the Setup Utility.
▶▶ Load Optimized Defaults
Load the optimized defaults.
▶▶ Save as User Defaults
Save all changes as user defaults.
▶▶ Restore User Defaults
Restore the preset user defaults.
3-26