Scientific Atlanta Cox Business Video Digital Receivers Operating instructions

Connecting the
Explorer® 3250TM
Digital Home
Communications Terminal
1
Notice for CATV Installers
Notice for CATV Installers
If you are a CATV installer, read the information in the box below.
Note to CATV System Installer
(USA/Canada Only)
This reminder is provided to call the CATV
system installer's attention to Article 820-40
of the NEC (Section 54, Part I of the Canadian
Electrical Code), that provides guidelines for
proper grounding and, in particular,
specifies that the CATV cable ground shall
be connected to the grounding system of
the building, as close to the point of cable
entry as practical.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
CAUTION: To reduce the risk of electric
shock, do not remove cover (or back).
No user-serviceable parts inside. Refer
servicing to qualified service personnel.
WARNING
TO PREVENT FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
This symbol is intended to alert you that
uninsulated voltage within this product may
have sufficient magnitude to cause electric shock.
Therefore, it is dangerous to make any kind of
contact with any inside part of this product.
This symbol is intended to alert you of the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying this product.
U. S. Patents
A patent notice is affixed to this product. In addition, the product may also be covered by one or more of the
following patents:
4,636,852; 4,641,181; 4,651,208; 4,691,353; 4,698,598; 4,719,642; 4,748,667; 4,829,569; 4,866,770; 4,885,775;
4,888,799; 4,890,319; 4,922,532; 4,965,534; 5,012,510; 5,029,207; 5,045,816; 5,053,883; 5,058,160; 5,142,690;
5,146,526; 5,214,390; 5,225,902; 5,225,925; 5,237,610; 5,239,540; 5,241,610; 5,255,086; 5,257,403; 5,267,071;
5,270,809; 5,271,041; 5,272,752; 5,282,028; 5,285,497; 5,287,351; 5,309,514; 5,319,709; 5,341,425; 5,347,388;
5,347,389; 5,361,156; 5,367,571; 5,379,141; 5,379,145; 5,381,481; 5,390,337; 5,400,401; 5,406,558; 5,418,782;
5,428,404; 5,430,568; 5,434,610; 5,436,749; 5,442,472; 5,455,570; 5,471,492; 5,477,199; 5,477,370; 5,481,389;
5,485,221; 5,493,339; 5,500,758; 5,502,499; 5,506,904; 5,519,780; 5,550,825; 5,579,055; 5,579,057; 5,583,562;
5,596,606; 5,600,378; 5,602,933; 5,640,388; 5,657,414; 5,675,575; 5,715,515; 5,724,525; 5,740,300; 5,742,677;
5,754,940; 5,757,416; 5,771,064; 5,774,859; 5,825,829; 5,826,167; 5,850,305; 5,854,703; 5,870,474; 5,892,607;
5,920,626; 5,923,755; 5,930,024; 5,930,515; 5,937,067; 5,963,352; 5,966,163; 5,982,424; 5,991,139; 5,999,207;
6,005,631; 6,005,938; 6,016,163; 6,028,941; 6,029,046; 6,052,384; 6,055,244; 6,072,532; 6,105,134; 6,148,039;
6,157,719; 6,188,729; 6,195,389; 6,212,278; 6,215,530; 6,219,358; 6,240,103; 6,243,145; 6,246,767; 6,252,964;
6,272,226; 6,292,081; 6,292,568; 6,320,131; 6,374,275; 6,405,239; 6,411,602; 6,417,949; 6,424,714; 6,424,717;
6,433,906; 6,438,139; 6,463,586; 6,467,091; 6,476,878; 6,493,876; 6,510,519; 6,516,002; 6,516,412; 6,526,508;
6,538,595; 6,546,013; 6,560,340; 6,567,118; 6,570,888; 6,622,308; 6,629,227; 6,664,984; 6,667,994; 6,671,879;
6,674,967; 6,678,891; 6,714,598; 6,721,352; 6,721,956; 6,725,459; 6,738,982; 6,744,892; 6,744,967; 6,751,271;
6,760,918; 6,795,972; 6,802,077; 6,804,708; 6,811,447; 6,817,028; D348065; D354959; D359737; D363932;
D390217; D434753; RE36988
2
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS .......................................................... 4
Welcome! ......................................................................................................... 6
Safety First ................................................................................................. 6
The Explorer eClub .................................................................................... 6
Identify Your 3250 ...................................................................................... 6
What’s On the Front Panel? ........................................................................... 7
What’s On the Back Panel? ............................................................................ 8
Connecting the 3250 ....................................................................................... 9
Connections for a Standard-Definition TV and VCR .................................... 10
Watch TV .......................................................................................................... 11
Performance Tips ....................................................................................... 11
Frequently Asked Questions .................................................................... 11
Connecting the 3250 to a Standard TV and Standard VCR ......................... 12
Connecting the 3250 to a Stereo TV and Stereo VCR .................................. 13
Connecting the 3250 to a Home Theater Receiver ...................................... 14
Compliance Information ................................................................................. 15
3
IMPORTANT SAFETY INSTRUCTIONS
Heed Warnings
Adhere to all warnings on the product and in the operating
instructions.
Read, Retain, and Follow
These Instructions
Read all of the instructions before you operate this product.
Follow all operating instructions that accompany this product.
Retain the instructions for future use. Give particular attention to
all safety precautions.
Comply With Warnings
Avoid electric shock. Comply with all warnings and cautions in
the operating instructions, as well as those that are affixed to
this product.
Do not overload electrical outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or
electric shock. For products that require battery power or other
sources to operate, refer to the operating instructions for that
product.
Preventing Power Cord Damage
Arrange all power cords so that people or pets cannot walk on
the cords. Do not place objects on the cords. Do not lean objects
against the cords. Placing objects on or leaning objects against
cords can damage the cords. Give particular attention to cords at
the point at which the cord connects to plugs, at the electrical
outlets, and where the cords exit the product.
Usage Warnings
Providing Ventilation
Power Warnings
This product has openings for ventilation that protect it from
overheating. To ensure the reliability of this product, do the
following:
Providing a Power Source
• Do not block or cover these openings.
A label on this product indicates the correct power source for this
product. Operate this product only from an electrical outlet with
the voltage and frequency indicated on the product label.
• Do not place entertainment devices (such as VCRs or DVDs),
lamps, books, vases with liquids, or other objects on top of this
product.
If you are uncertain of the type of power supply to your home or
business, consult your cable service provider or your local power
company.
• Do not place this product in any of the following locations:
Grounding This Product (USA/Canada Only)
WARNING: To avoid electric shock and fire
hazard, match the plug and outlet connections carefully,
then fully insert. If the plug and outlet do not match, or
you cannot fully insert the plug, contact an electrician to
update your power outlets.
This product is equipped with either a three-prong (grounding pin)
safety plug or a two-prong (polarized) safety plug. To properly
ground this product, follow these safety guidelines:
• For a 3-prong plug (one prong on this plug is a protective
grounding pin), insert the plug into a grounded mains, 3-prong
outlet.
Note: This plug fits only one way. If you are unable to insert
this plug fully into the outlet, contact your electrician to
replace your obsolete outlet.
• For a 2-prong plug (a polarized plug with one wide blade and
one narrow blade), insert the plug into a polarized mains,
2-prong outlet in which one socket is wider than the other.
Note: If you are unable to insert this plug fully into the outlet, try
reversing the plug. If the plug still fails to fit, contact an
electrician to replace your obsolete outlet.
- On a bed, sofa, rug, or similar surface
- Near heat sources such as radiators, heat registers, stoves,
or other products (including amplifiers) that produce heat
- In an enclosure, such as a bookcase or rack, unless the
installation provides proper ventilation
Selecting a Proper Location
WARNING: Avoid personal injury and damage to
this product! An unstable surface may cause this product
to fall.
Place this product in a location that is close enough to an
electrical outlet and where the power cord is easily accessible to
be disconnected from the wall outlet or from the rear panel of the
product.
Important: The power cord is the mains power supply
disconnect device.
Place this product on a stable surface. The surface must support
the size and weight of this product.
Cleaning This Product
WARNING: Avoid electric shock! Unplug this
product before cleaning.
Overloading
WARNING: Avoid electric shock and fire hazard!
Do not overload mains AC outlets and extension cords. For
products that require battery power or other power sources
to operate them, refer to the operating instructions for
those products.
4
Before cleaning this product, unplug it from the electrical outlet.
Use a damp cloth to clean this product. Do not use a liquid
cleaner or an aerosol cleaner. Do not use a magnetic/static
cleaning device (dust remover) to clean this product.
IMPORTANT SAFETY INSTRUCTIONS, continued
Protecting This Product From Foreign Objects and
Water or Moisture Damage
WARNING: Avoid electric shock and fire hazard!
Never push objects through the openings in this product.
Foreign objects can cause electrical shorts that can result
in electric shock or fire. Do not expose this product to rain
or moisture. Do not place objects filled with liquid, such
as vases, on this product.
Outdoor Grounding System
If this product connects to an outdoor antenna or cable system, be
sure the antenna or cable system is grounded (earthed). This
provides some protection against voltage surges and built-up static
charges.
Article 810 of the National Electric Code (NEC) ANSI/NFPA
No. 70-1990, provides the following information:
• Grounding of the mast and supporting structure
• Grounding the lead-in wire to an antenna discharge unit
• Size of the grounding conductors
Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or short
out parts that could result in a fire or electric shock.
Do not expose this product to liquids or moisture. Do not place
this product on a wet surface. Do not spill liquids on or near this
product.
• Location of the antenna-discharge unit
• Connection to grounding electrodes
• Requirements for the grounding electrodes (see the following
antenna grounding diagram as recommended by NEC ANSI/
NFPA 70)
Do not use this product near water (such as a bath tub, wash
bowl, sink, or laundry tub), in a wet basement, or near a
swimming pool.
Accessories
WARNING: Avoid any potential for electric shock or
fire. Do not use accessories with this product unless
recommended by your cable service provider.
Avoid any potential for electric shock or fire. Do not use
accessories with this product unless recommended by your cable
service provider.
Service Warnings
Servicing This Product
Lightning
Do not open the cover of this product. If you open the cover, your
warranty will be void. Refer all servicing to qualified personnel
only. Contact your cable service provider for instructions.
For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning
and power-line surges. Plugging this product into a surge protector
may reduce the risk of damage.
Note: Unplugging this product for an extended period of time can
result in loss of authorization. For reauthorization, contact your
cable service provider.
Obtaining Service for Product Damage
Power Lines
WARNING: Avoid electric shock! Opening or
removing the cover may expose you to dangerous
voltages. This product contains no user-serviceable parts.
Refer all servicing to qualified service personnel.
For damage that requires service, unplug this product from the
AC outlet. Then, contact your cable service provider or qualified
service personnel to obtain service for the following conditions:
• If there is damage to the power-supply cord or plug
• If liquid enters this product
• If you expose this product to rain or water
• If you drop this product, a heavy object falls on this product, or
damage occurs to the cover of this product
• If this product does not operate normally by following the
operating instructions
WARNING: To avoid electric shock, do not locate
an outside antenna system in the vicinity of overhead
power lines or power circuits.
Do not locate an outside antenna system in the vicinity of overhead
power lines or power circuits. When installing an outside antenna
system, take extreme care to keep from touching power lines or
circuits, as contact might be fatal.
• If this product exhibits a distinct change in performance
Checking Product Safety
Upon completion of any service or repairs to this product, the
service technician must perform safety checks to determine that
this product is in proper operating condition.
5
Welcome!
The Explorer® 3250™ Digital Home Communications Terminal (3250) can receive and display
analog and digital signals, as well as provide exceptional picture quality.
Through the 3250, you can access interactive services, such as video-on-demand and
pay-per-view programs. Contact your cable service provider for information about these and other
available services.
Use the instructions in this guide to install the 3250, to become familiar with the buttons on the
front panel, and to access your cable services. Then, sit back and enjoy Explorer 3250 DHCT
experience!
Safety First
Before using the 3250, read the IMPORTANT SAFETY INSTRUCTIONS section of this guide.
The Explorer eClub
The online Explorer eClub provides news and information about the 3250. You can access the Explorer
eClub on the Internet at the following Web address:
www.scientificatlanta.com/explorerclub
To join and access the online Explorer eClub, you must enter the model number of your set-top. The
model number is located on the front panel of the 3250.
Identify Your 3250
To find the serial number for your 3250, look on
the back panel for a label that is similar to the example shown
here. The serial number begins with SA and is located in the
lower left corner of the bar code.
If the 3250 requires troubleshooting in the future,
your cable service provider may ask for this serial number.
Use the space provided here to record the serial number:
____________________________________________
6
0003B4287797
SABDQXTL
Serial Number
N0006246618
T11185
What’s On the Front Panel?
1
2 3
4
5
678
9
10
11
T11505
1 Power
Turns the 3250 on and off
2 VOL + and VOL -
Enables you to increase and decrease the volume
3 CH + and CH -
Enables you to scroll up and down through the channels
4 Select
Provides access to your on-screen selection
5 LED Display
Displays the selected channel number and time of day. The LED also displays
the following:
• Message (
• Power (
)
)
6 Guide
Accesses on-screen services, such as the on-screen guide, video-on-demand, or
pay-per-view
7 Info
Displays a description of the selected program. This button is available from the
on-screen guide and while viewing a program
8 Exit
Exits menus, the on-screen guide, and program information
9 Settings
Accesses the Settings menu
10 Smart Card*
Allows smart card access
11 USB Port*
Connects to external equipment, such as a keyboard
* These features may not be available on all 3250 models.
7
What’s On the Back Panel?
0003B4287797
SABDQXTL
T11500
N0006246618
1
2 3 4
5
6
7
8
9
10
1 IR
This connection is reserved for future use
2 S-Video Out
Connect an S-Video cable to send an S-Video signal to your TV or VCR.
This signal is standard definition but higher quality than other standard
television connections
3 Digital Audio
Output
Connect an RCA cable to send a digital audio signal to a surround-sound
receiver or other digital audio device
4 Video Out
Connect to the video input of TV or VCR
5 Audio Out
Connect RCA cables to Audio Out to send analog audio signals (left and right)
(LEFT and RIGHT) to a stereo receiver or TV with stereo outputs
6 Cable Out
Connect a coaxial cable to Cable Out to send analog audio and video signals.
to a TV or VCR. These signals are SDTV video and stereo audio
7 Cable In
Connect the coaxial cable that delivers the signal from your cable service provider
8 RF BYPASS
Contact your cable service provider for more information
9 AC Outlet
Connect the AC power cord from another device, such as a TV
10 AC Power Input
8
Connect the power cord to deliver power to the 3250
Connecting the 3250
To connect your 3250 to your entertainment devices, complete these steps.
Connect the coaxial cable that carries the signal from your cable service provider to
the Cable In connector on the back panel of the 3250.
1
To connect your TV to the 3250, see the connection diagrams beginning on
page 12. Select the configuration that best matches your entertainment devices.
2
Plug the 3250 and the TV into an AC power source.
3
POWER
Important: To protect the 3250 from power surge damage, ground (earth) your cable
product to provide some protection against voltage surges and built-up static charges. To
avoid these voltage surges that can be caused by lightning storms and power outages,
plug the 3250 into a surge protector in order to reduce the risk of damage.
Do not turn on the 3250 or TV yet.
4
It may take several minutes for the 3250 to receive the latest software, programming, and
service information. Wait until you see one of the following displays on the front panel of the
3250 that indicates that the update is complete:
5
• Current time
• Four dashes (- - - -)
Note: If four dashes are displayed, you must call your cable service provider to get the
3250 authorized.
To begin watching TV, turn the TV ON, and press POWER on the front of the set-top.
6
Automatic Software Updates
Upon power-up, the TV screen may occasionally display a message that indicates the 3250 is
automatically updating its software. Wait for the time to display on the front panel of your 3250 before
continuing with the installation process. When the front panel displays the time, the update is complete.
9
Connections for a Standard-Definition TV and VCR
When using the 3250 with an SDTV, you must make the following connections to view content.
Check your TV’s user guide for connection instructions.
Use one of the following connection combinations, but not both:
•
Connect the CABLE OUT port from the set-top to the CABLE IN/ANT IN port on a TV or VCR.
•
Connect the VIDEO OUT port and the L/R AUDIO OUT ports from the set-top to the VIDEO IN
and L/R AUDIO IN ports on a TV or VCR.
Note: The S-Video connection is an optional connection. However, it is the preferred video
connection if it is available on your TV. You must make a separate audio connection when using
S-Video.
Video
The Video Out connection provides a video connection to
standard-definition TVs.
S-Video
Required Connections to an SDTV
The S-Video Out connection provides the optimal video
connection to standard-definition TVs.
3250
Connections
SDTV
Connections
VIDEO
OUT
VIDEO IN
S-VIDEO
OUT
S-VIDEO
IN
Cable
Out
Audio
L
The left and right audio outputs provide stereo sound when
connected to a stereo receiver or a TV with stereo sound.
The Cable Out connection provides both a video and an
audio connection to an SDTV.
Home
Theater
VCR
Optional Connections
The Cable Out connection provides both a video and an audio
connection to the VCR.
The Digital Audio Out connection provides an excellent
audio signal to a surround-sound receiver or other digital
audio devices.
Note: Digital audio is only active on digital channels.
10
R
L
R
AUDIO
OUT
CABLE
OUT
CABLE IN/
ANT IN
3250
Connections
SDTV
Connections
CABLE
OUT
CABLE IN/
ANT IN
DIGITAL AUDIO
OUT
DIGITAL
AUDIO
IN
Watch TV
Access Services and Programs
Access cable services and programs by pressing the following keys on the remote control:
•
Guide–Access the on-screen guide. The on-screen guide displays schedules of TV programs
and other services available from your cable service provider, such as video-on-demand and
pay-per-view programs.
•
Arrows–Highlight a program in the schedule.
•
Info–Display a specific program description (either from the on-screen guide or while viewing
a program).
•
Select–View a specific program in the guide.
Performance Tips
If the 3250 does not perform as expected, the following tips may help. If you need further assistance,
contact your cable service provider.
No Picture
•
Verify that the power to your TV is turned on.
•
If the 3250 is plugged into a wall switch, verify the wall switch is in the ON position.
•
Verify that all cables are properly connected.
•
If your system includes a VCR or stereo, verify that you have properly connected them to
the 3250.
•
Verify that your TV is connected to the proper TV input port.
•
Verify that the TV is set to the proper input channel.
Note: You should avoid plugging the 3250 into an outlet that is controlled by a wall switch.
No Color
•
Verify that the current TV program is broadcast in color.
•
Adjust the TV color controls.
No Sound
•
If your setup includes a stereo, verify that you have properly connected it to the 3250.
•
Verify that the volume is turned up.
•
Verify that the mute function is not engaged.
Frequently Asked Questions
Where are the connection diagrams?
The diagrams on the following pages show examples of typical connections for the 3250.
What cables do I need?
Some of the cables shown in the diagrams may not be included with the 3250. The required cables are
shown in the connection diagrams on the following pages.
11
Connecting the 3250 to a Standard TV and Standard VCR
1
Connect
the 3250
to the VCR.
Explorer 3250 DHCT
0003B4287797
SABDQXTL
VCR
2
Connect
the VCR
to the TV.
T11501
12
N0006246618
IN FROM ANT.
Standard TV
CABLE/
ANTENNA
Cable Input
OUT TO TV
VCR
IN FROM ANT.
OUT TO TV
WARNING:
Electric shock
hazard! Unplug all
electronic devices
before connecting
or disconnecting
any device cables
to the 3250.
Connecting the 3250 to a Stereo TV and Stereo VCR
1
Explorer 3250 DHCT
Connect
the 3250
to the
stereo TV.
0003B4287797
SABDQXTL
LEFT
OUT IN
N0006246618
Cable Input
VIDEO 2
OUT IN
AUDIO 2
OUT IN
CABLE/
ANTENNA
RIGHT
LEFT
OUT IN
VIDEO 1
OUT IN
AUDIO 1
OUT IN
Stereo
TV
2
RIGHT
Explorer 3250 DHCT
Connect
the 3250
to the
stereo VCR.
0003B4287797
SABDQXTL
N0006246618
Cable Input
RF IN
L
R
L
R
RF OUT
VIDEO
IN
3
Connect the
stereo TV
to the
stereo VCR.
AUDIO
IN
VIDEO
OUT
Stereo
VCR
AUDIO
OUT
Stereo
VCR
Stereo
TV
RF IN
L
R
L
RF OUT
VIDEO
IN
AUDIO
IN
VIDEO
OUT
LEFT
OUT IN
R
AUDIO 2
OUT IN
CABLE/
ANTENNA
AUDIO
OUT
RIGHT
LEFT
OUT IN
AUDIO 1
OUT IN
T11502
VIDEO 2
OUT IN
RIGHT
VIDEO 1
OUT IN
WARNING:
Electric shock
hazard! Unplug all
electronic devices
before connecting
or disconnecting
any device cables
to the 3250.
13
Connecting the 3250 to a Home Theater Receiver
1
Explorer 3250 DHCT
Connect
the 3250
to the
Home
Theater
Receiver.
0003B4287797
SABDQXTL
N0006246618
Cable Input
Home
Theater
Receiver
DIGITAL
AUDIO
TV/CABLE
DVD
VIDEO 1
COMPONENT VIDEO
Y
Y
Y
PB
PB
PB
MONITOR
1
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
VIDEO
VIDEO
VIDEO
VIDEO
2
S-VIDEO
OUT
VIDEO OUT
PR
PR
PR
3
L
L
L
L
AUDIO
AUDIO
AUDIO
AUDIO
R
R
1
IN
4
2
Connect the
Home Theater
Receiver
to the
stereo TV.
Home
Theater
Receiver
DIGITAL
AUDIO
TV/CABLE
R
OUT
DVD
IN
L
2
OUT
AUDIO OUT
R
VIDEO 1
R
COMPONENT VIDEO
Y
Y
Y
PB
PB
PB
MONITOR
1
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
VIDEO
VIDEO
VIDEO
VIDEO
L
L
L
L
AUDIO
AUDIO
AUDIO
AUDIO
R
R
2
S-VIDEO
OUT
VIDEO OUT
PR
PR
PR
3
4
Stereo
TV
LEFT
OUT IN
OUT
CABLE/
ANTENNA
VIDEO 1
OUT IN
AUDIO 1
OUT IN
T11637
IN
R
IN
2
L
OUT
AUDIO OUT
R
VIDEO 2
OUT IN
AUDIO 2
OUT IN
RIGHT
LEFT
OUT IN
R
1
RIGHT
WARNING:
Electric shock hazard!
Unplug all electronic
devices before connecting
or disconnecting any
device cables to the 3250.
Setting Up Digital Audio
To set up digital audio, connect an RCA cable from the DIGITAL AUDIO OUT on the 3250 to the
DIGITAL AUDIO IN on your TV (if equipped) or to a stereo receiver.
Notes:
• Digital audio is only available on digital channels.
• Depending on the capabilities of your home theater system, you may need to manually switch from digital
to analog inputs.
14
Compliance Information
United States FCC Compliance
Canada EMI Regulation
This equipment has been tested and found to comply
with the applicable limits of Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio or TV reception, which can
be determined by turning the equipment off and on. The
user is encouraged to try to correct the interference by
one or more of the following measures:
• Increase the separation between the equipment
and receiver
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected
• Consult your cable company or an experienced
radio/TV technician for help
Any changes or modifications not expressly approved
by Scientific-Atlanta could void the user’s authority to
operate the equipment.
Important: The information shown in the FCC
Declaration of Conformity paragraph below is a
requirement of the FCC and is intended to supply you
with information regarding the FCC approval of this
device. The phone numbers listed are for FCC-related
questions only and not intended for questions regarding
the connection or operation for this device. Please
contact your cable service provider for any questions
you may have regarding the operation or installation of
this device.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la class B est conforme à la
norme NMB-003 du Canada.
Software and Firmware Use
Scientific-Atlanta, Inc. owns copyrights to the software
included in your set-top and furnishes the software to
your cable service provider under a license agreement.
You may only use or copy this software in accordance
with the terms of your cable service provider.
Scientific-Atlanta, Inc. owns copyrights to the firmware
in this equipment. You may only use the firmware in the
equipment in which it is provided. Any reproduction or
distribution of this firmware, or any portion of it, without
the express written consent of Scientific-Atlanta, Inc. is
prohibited.
Trademarks
Explorer, Scientific-Atlanta, and the Scientific-Atlanta
logo are registered trademarks of Scientific-Atlanta, Inc.
3250 is a trademark of Scientific Atlanta, Inc. All other
trademarks shown are trademarks of their respective
owners.
Disclaimer
Scientific-Atlanta, Inc. assumes no responsibility for
errors or omissions that may appear in this guide.
Scientific-Atlanta reserves the right to change this guide
at any time without notice.
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received,
including interference that may cause undesired
operation.
EXPLORER® 3250™
Digital Home Communications Terminal:
Model 3250
Manufactured by: Scientific-Atlanta, Inc.;
5030 Sugarloaf Parkway;
Lawrenceville, Georgia 30044; USA
Telephone 770-236-1077
15
© 2005 by Scientific-Atlanta, Inc. All rights reserved.
Product and service availability subject to change without notice.
Scientific-Atlanta, Inc., 5030 Sugarloaf Parkway, P.O. Box 465447, Lawrenceville, GA 30042
www.scientificatlanta.com
February 2005
Printed in USA
4007203 Rev A