Motors | Automation | Energy | Transmission & Distribution | Coatings
MW500
Decentralized VSD
MotorDrive
www.weg.net
The VSD wherever you need
The MW500 is a high performance product dedicated for induction motor control, with embedded features
and a high protection degree of IP66 / NEMA 4X which allow decentralized installation directly on the motor or
on a wall. Designed exclusively for industrial or professional use, the decentralized WEG VSD adds a great deal
of flexibility, allowing the user to install the product near to the controlled motor, thus eliminating the necessity
of long cables and panels.
Decentralized
Indoor or outdoor applications
Characteristics
Motor or wall assembly
Flexible
Wide range of accessories and
functions
Plug-in module
Flash memory module
Robust
IP66/NEMA 4X outdoor enclosure
SoftPLC
Increasing the ruggedness
and durability
Efficient
High performance for machines
and processes
Functions to streamline
operation and
performance
Reliable
Same trustworthiness of WEG
products
WEG quality
Integrated
Fieldbus networks
2
MW500 - MotorDrive
Communication networks
www.weg.net
Advantages
Benefits
It is possible for the MW500 to be assembled on a wall
or, using the terminal box coupling directly over the W22
or W21 motors.
Makes the commissioning easy, saving space and
cabling, in other words, reducing cost for all installation.
The optional communication network and I/O modules
are fast and easily to be installed, allowing adaptation of
the standard VSD to each application.
Time saving, standardization and optimized costs
according to the necessity.
Within seconds, it is possible to download the SoftPLC
program and parameters setup from a MW500 to others
without powering them up.
Fast, easy and reliable programming for manufacturers
that produce machines in large scale.
Built-in PLC (SoftPLC), allowing the VSD, motor and
application to work in an interactive way. It allows the
user to implement customized logic and applications.
It eliminates the necessity of an external PLC, reducing
costs, optimizing space and simplifying the system.
Complete protection against contact with internal live parts,
avoiding the entrance of dust or water coming from jets.
Panel not required, reducing the installation costs.
PID: process control.
Sleep: disables the VSD automatically.
Energy saving.
Flying start: allows to start a motor that was running freely,
accelerating it from the speed at which it was running.
It allows fast operating response of the machine and
prevents occasional mechanical breakdowns.
Ride through: keeps the VSD in
operation during voltage dips.
It prevents machine stoppage and downtime.
100% of the VSDs are tested with load at the factory
under rated conditions.
High reliability.
Protection against ground fault, short circuit, over
temperature and others.
It prevents damage to the inverter which can be caused
by adverse situations, normally external factors.
Thermal protection of IGBTs based on manufacturer curve.
Conformal Coating (Tropicalization) as Standard.
Classified as 3C2 according to IEC 60721-3-3.
VSD lifetime is extended: protection against chemically active
substances, related to contamination from the atmosphere.
CANopen, DeviceNet, Profibus-DP and Modbus-RTU.
Full integration with process network.
MW500 - MotorDrive
3
www.weg.net
Easy Configuration
Main Components
Frontal cover
LED indicators
Disconnect switch
Motor connection
box screws
Plug-in module
Main case
Motor connection box
Motor seal
Wall adapter plate
(accessory not provided
with the drive)
Certifications
11
1
2
10
9
3
4
5
8
6
7
4
MW500 - MotorDrive
1 - Motor connection
2 - Motor PTC input
3 - S10 dip-switches
4 - Simplified label
5 - Plug-in slot
6 - Power supply connection
7 - Grouding points
8 - Brake connection
9 - LED indicators
10 - Connection box screw
11 - Grounding connection screw
www.weg.net
Applications
Centrifugal pumps
Compressors
Process pumps
Fans/exhaust fans
Mixers/bottlers
Washers/driers
Conveyor belts
General machinery
Up to
50 ºC
on motor
mounting
MW500 - MotorDrive
5
www.weg.net
Special Features
Conector IP66/NEMA 4X
Special conector for
Remote HMI (M8)
Analog Potentiometer
Built-In
No need HMI to operate
Fins Instead of Fan
Reduce maintenance cost
LED Indicators
Status indication
Remote HMI
Simple and intuitive
Switch-Disconnector
Built-In (Optional)
Easy and safe machine maintenance
Characteristics
 = Bus connection DC (frame B only)
 = Connection for brake resistor
Increasing the lifetime, protecting the
electronic boards against corrosive
atmospheres. Classified as 3C2
according to IEC 60721-3-3.
S/L2
With C2/C3 options, the VSD faces a Power
supply
T/L3
redution in the EMC level, some cases even
more, taking advantage of the motor and
VSD distance, thus increasing the EMC class.
IP66/NEMA 4X Protection Degree
Black Color
Key to the decentralized solution, the
IP66 provides protection against contact
with internal live parts and the ingress of
dust or water.
The black color increases the enclosure
dissipation capability, helping the drive
support up to 50 °C on motor mounting
without derating.
SoftPLC
SuperDrive G2
Functions to streamline operation and
increase performance, in many cases
eliminating the necessity of an external
PLC, optimizing and simplifying the system.
Special software, allowing the parameter
setting, command and monitoring
of
MW500 Keypad
(remote)
VSD, in this last option, simulating an
oscilloscope with Trend function.

DC-
Precharge
R/L1
RFI
filter
Recfilter
Disconnect
switch
BR
PE
Breaking IGBT
RFI Filter

DC+
DC link capacitors bank
Conformal Coating

Inverter
IGBT
Cur
POWER
CONTROL
PLUG-IN
MODULE
2)
XC10
MW500 - MotorDrive
Supplies for electronics and interfaces
between power and control
CPU
32 bits
"RISC"
PC
6
CONTROL
Software WLP
SuperDrive1)
Modbus
Modbus
Digital input
(DI1 to DI4)1)
RS485
Interfaces
(RS232,
RS485
or USB)
User’s
Plug-in
Card
EEPROM
(memory
www.weg.net
MORE savings!
Space saving and
flexible solution
Increased
ruggedness
Cost savings
on cables
Reduced installation
costs
Easy
commissioning
Panel not
required
+
costs
Up to
space
40%
of cost
reduction
www.weg.net
SuperDrive G2
Software application to program, control and monitor WEG VSDs. To connect MW500 to a computer it
is necessary to use a plug-in module.
USB plug-in module
Friendly environment
FREE download at www.weg.net
Trend Function
Online graphic monitoring of parameters/variables
JJ Possibility to export an image with the respective graph
based upon the selected period
JJ
Changing and Monitoring Parameters in a List/Table
Parameter settings can be stored in a computer file format.
Status Monitoring
Operation with HMI
Online parameter editing.
JJ
JJ
8
pload/download parameters from the PC to the MW500 and vice
U
versa
Offline editing of the parameters stored on the PC
MW500 - MotorDrive
www.weg.net
SoftPLC - Built-In in the Standard Product
Functionalities of a PLC available as standard, allowing the creation of applications. The WLP software
and the SoftPLC functionality are a smart and simple way to make your MW500, motor and application
work together. Plug-in module required to connect with a computer.
Easy programming: Ladder
Speed reference
Contacts and coils
Trace Function
JJ Online graphic monitoring of parameters/
variables
JJ Configurable up to six channels
Comparators and math
functions
Counters and
timers
FREE download at www.weg.net
PID
User block protected by
password
Online Monitoring Parameters/Variables List
Enable/Disable I/Os
It simplifies and speeds up the validation of the
application.
Parameter Edition
For changing the parameters values.
I/Os Monitoring
MW500 - MotorDrive
9
www.weg.net
Coding
The MW500 code identifies its construction characteristics, nominal current, voltage range and
optionals. Using the smart code, it is possible to select the MW500 required for your application simple
and quickly.
Product and
series
MW500
Model identification
Frame size
Rated current
N° of phases
Rated voltage
A
02P6
T
4
Braking1)
Degree of
protection¹)
Conducted
emission
level¹)
Disconnect
switch
Terminal
box adaptor
Hardware
version
Software
version
DB
66
C2
DS
A56
H00
---
Check table below
NB = without dynamic braking
DB = with dynamic braking
66 = IP66/NEMA 4X
Blank = with no RFI filter
C2 = according to category 2 of IEC 61800-3 standard, with internal RFI flter
C3 = according to category 3 of IEC 61800-3 standard, with internal RFI flter
MW500
Blank = without disconnect switch
DS = with disconnect switch
A56 = 56 mm motor terminal box adaptor
A70 = 70 mm motor terminal box adaptor
Blank = standard
H00 = without plug-in module
Blank = standard
Sx = special software
Frame sizes
A
A
B
Output current
Input
Power supply voltage
04P3 = 4.3 A
S = single phase
power supply
2 = 200... 240 V
T = three-phase
power supply
4 = 380... 480 V
06P0 = 6.0 A
02P6 = 2.6 A
04P3 = 4.3 A
06P5 = 6.5 A
Braking
Degree of protection
Conducted emission level2)
DB
66
Blank or C2
10P0 = 10 A
Notes: 1) To know which models have these options in the standard product the above table should be checked.
2) RFI filter.
Categories:
- Category C1: inverters with voltages below 1,000 V, for use in the First Environment.
- Category C2: inverters with voltages below 1,000 V, with plugs or mobile installation, when used in the “First Environment”, must be installed and
started-up by a qualified professional.
- Category C3: inverters with voltages below 1,000 V, developed for use in the Second Environment and not designed for use in the “First Environment”.
Environments:
- First Environment: environments that include household installations, such as buildings directly connected, without intermediate transformer, to a lowvoltage power supply grid, which supplies buildings used for domestic purposes.
- Second Environment: includes all the buildings other than those directly connected to a low-voltage power supply grid, which supplies buildings used
for domestic purposes.
For the RFI filters of external installations, refer to the MW500 user manual.
10
MW500 - MotorDrive
www.weg.net
Drive Ratings
The correct way to select a VSD is matching its output current with the motor rated current.
The tables below present the expected motor power for each VSD model. Use the motor power
ratings below only as a guidance. Motor rated currents may vary with speed and manufacturer.
IEC motor powers are based on WEG 4-pole motors; NEMA motor powers are based on NEC
table 430-150.
Ratings and Models
Power supply In (V)
Single-phase
200-240
Three-phase
380-480
Three-phase
380-480
Maximum motor power1)
Model
Frame size
Output current (A)
MW500 A 04P3 S2 DB 66
A2)
4.3
MW500 A 06P0 S2 DB 66
A2)
6.0
MW500 A 02P6 T4 DB 66
A2)
2.6
1.1
MW500 A 04P3 T4 DB 66
A2)
4.3
1.5
MW500 B 06P0 T4 DB 66
B
6.5
MW500 B 10P0 T4 DB 66
B
10
IEC (kW)
NEMA (HP)
0.75
50 Hz - 230 V
50 Hz - 415 V
1
60 Hz - 230 V
1.1
1.5
1.5
2
60 Hz - 460 V
2.2
3
4
5
Notes: 1) U
se motor power ratings below only as a guidance. Motors are rated for 400 V, 50 Hz, 4-pole. The right way to size a VSD is matching its output current
with the rated motor current.
2) Coming soon.
Dimensions and Weights
IP66/NEMA 4X
Frame size
H
mm (in)
W
mm (in)
D
(without disconnect switch)
mm (in)
D
(with disconnect switch)
mm (in)
Weight
Kg (lb)
A1)
240 (9.45)
165 (6.50)
125 (4.92)
172 (6.77)
3,7 (9.14)
B
269 (10.61)
269 (10.61)
141 (5.55)
188 (7.39)
5,3 (11.68)
H
Note: 1) Coming soon.
D
Mechanical Sizing Table for Motor Mounting
W
IEC
56 mm
70 mm
Frame
71
80
90
100
112
A1)
ü
ü
ü
ü
ü
ü
ü
ü
B
110 mm
132
160
180
ü
Note: 1) Coming soon.
NEMA
56 mm
70 mm
110 mm
Frame
143T/145T
182T/184T
213T/215T
A1)
ü
ü
ü
B
ü
ü
ü
254T/256T
284T/286T
Notes: 1
) Coming soon.
Motor frame size for W22 and W21 series: Standard Efficiency (IE1), High Efficiency (IE2), Premium
Efficiency (IE3), Multimounting (standards and compact versions).
MW500 - MotorDrive
11
www.weg.net
Accessories and Optionals
The MW500 VSD was developed to meet the hardware configurations required by a wide range of
applications. The table below presents the available options:
Option
Type1)
RFI filter
Optional
Braking IGBT
Optional
Disconnect switch
Optional
Wall mounting kit
Accessory
Description
Used to reduce the disturbance conducted from the
CFW500 to the power supply, in the high frequency
band (>150 kHz), according to standards
61800-3 and EN 55011
Used in high-inertia applications for the fast stop of
the motor by means of an external braking resistance.
Resistance not included. For the calculation of the
braking resistance, refer to the MW500 user manual
A disconnect switch built-in the product for easy
and safe maintenance. This optional makes the
VSD IP65
An adaptation plate for assemble the drive on the wall
For more information please check the user manual
Optional item code2)
Accessory model
Available
C2 or C3
-
Factory installation
only
DB
-
Factory installation
only
DS
-
Factory installation
only
MW500 - KCFB
User installation
-
Motor mounting kit
Accessory
An adaptation box for assemble the drive on the motor.
For more information please check the user manual
-
I/O expansion modules
(plug-in)3)
Accessory
Used to configure the I/O points according
to the needs of the application/machine
-
Communication module
(plug-in)3)
Accessory
Used for the communication of the MW500 with
the main networks of the market (fieldbus)
-
Flash memory module
(plug-in)3)
Accessory
Remote HMI
Accessory
Cables for remote HMI
Accessory
Used to download the programming of a MW500 to
others without having to power them up
Used to transfer the operation to the panel door
or machine console. Maximum distance of 10 m.
Degree of protection IP54
Special cable desing using M8-DB9 connector with
0.5 m, or using the same cables of CFW the MW500
to the remote HMI (CFW500-HMIR)
MW500 - KAIM - A55
MW500 - KAIM - B56
MW500 - KAIM - B70
CFW500-IOS
CFW500-IOD
CFW500-IOAD
CFW500-IOR
CFW500-CUSB (USB)
CFW500-CCAN
(CANopen /DeviceNet)
CFW500-CRS232
CFW500-CRS485
CFW500-CPDP (Profibus-DP)
User installation
-
-
-
CFW500-MMF
-
-
CFW500-HMIR
-
-
MW500-CCHMIR0.5M
CFW500-CCHMIRXM, where
cables with lengths (X) of 1, 2,
3, 5, 7.5 and 10 meters
-
Plug-In Modules Specification3)
Plug-in module
IOS
IOD
IOAD
IOR
CUSB
CCAN
CRS232
CRS485
CPDP
Inputs
Outputs
Digital
Analog
Analog
Digital relay
4
8
6
5
4
2
2
4
2
1
1
3
1
1
1
1
2
1
1
1
2
1
1
1
1
1
1
1
1
1
4
1
1
1
2
1
Functions
Digital
transistor
1
4
3
1
1
1
1
1
1
USB port
1
-
CANopen/
DeviceNet
Fieldbus networks
Power supply
RS232
RS485
Profibus-DP
10 V
24 V
1
-
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
-
1
1
1
1
1
1
1
1
1
1
-
Notes: 1) Optional: hardware resources added to the MW500 in the manufacturing process accessory = hardware resource requested as a separated item.
2) Request the product according to the code available on page 10.
3) A
ll models of plug-in modules have at least one RS485 port. The CRS485 plug-in module has two RS485 ports. The MW500 allows installing one
plug-in module per unit.
Step by Step
1 - Remove cover
12
MW500 - MotorDrive
2 - Insert accessory
3 - Close cover
Simple!
www.weg.net
Block Diagram
 = Bus connection DC (frame B only)
 = Connection for brake resistor
Recfilter
Disconnect
switch
PE
Breaking IGBT
T/L3
BR

DC-
U/T1
V/T2
W/T3
DC link capacitors bank
RFI
filter
S/L2

DC+
Precharge
R/L1
Power
supply

Motor
Inverter with
IGBT’s
Current feedback
Dedicate
knob for
reference
POWER
CONTROL
Supplies for electronics and interfaces
between power and control
CPU
32 bits
"RISC"
EEPROM
(memory)
CONTROL
PLUG-IN
MODULE
MW500 Keypad
(remote)2)
XC10
PC
Software WLP
SuperDrive1)
Modbus
Modbus
RS485
Interfaces
(RS232,
RS485
or USB)
Power supply 10 V
Power supply 24 V
Analog
output (AO1)1)
User’s
Plug-in
Card
Digital
output DO1 (RL1)
Digital input
(DI1 to DI4)1)
Digital
output DO2 (TR)1)
Analog input
(AI1)1)
Accessory
Memory card
(Mcard)
Notes: 1) The
number of analog/digital inputs/outputs, as well as other resources, may vary according to the plug-in module used.
Table 7.1 provides a list of the available plug-ins. For further information, refer to the guide supplied with the accessory or the
CD-ROM.
2) Not provided with the product.
MW500 - MotorDrive
13
www.weg.net
Technical Data
1-phase, 200-240 V ac (+10%-15%)
0.75 and 1.1 kW (1 and 1.5 HP)
Voltage and power range
Power supply
1-phase/3-phase, 200-240 V ac (+10%-15%)
0.25 to 3 HP (0.25 to 2.2 kW)
3-phase, 200-240 V ac (+10%-15%)
2 to 7.5 HP (1.5 to 5.5 kW)
3-phase, 380-480 V ac (+10%-15%)
1.1 to 4 kW (1.5 to 5 HP)
Motor connection
Supply frequency
50/60 Hz (48 Hz to 62 Hz)
Voltage
3-phase, 0-100% of supplied voltage
Output frequency
0 a 500 Hz
Displacement power factor
>0.97
Overload capacity
1.5 x In (drive) for 1 minute every 6 minutes
Switching frequency
Default 5 kHz (selectable 2.5 to 15 kHz)
Aceleration time
0.1 to 999s
Deceleration time
0.1 to 999s
40 ºC - for wall mounting installation
Temperature
50 ºC - for motor mounting installation using self-ventilation
2% of current derating for each ºC above the specific operating temperature, limited to an increase of 10 ºC
Environment
Humidity
5% to 95% non-condensing
Up to 1,000 m - rated conditions
Altitude
1,000 m to 4,000 m - 1% of current derating for each 100 m above 1,000 m of altitude
Protection degree
IP66/NEMA 4X (the disconnect switch is IP65)
Speed regulation: 1% of the rated speed (with slip compensation)
V/f control
Speed variation range: 1:20
Performance
Speed regulation: 1% of the rated speed
Vector control (VVW)
Speed variation range: 1:30
Braking methods
DC current applied to motor
dynamic braking
Available as standard for frame size B. For frame size A “DB” models has to be used.
An extra resistor must be fitted in for dynamic braking capability
Overcurrent/phase-phase short circuit in the output
Overcurrent/phase-ground short circuit in the output
Under/overvoltage
Overtemperature in the heatsink
Safety
Protection
Overload in the motor
Overload in the power module (IGBTs)
External alarm / fault
Setting error
14
MW500 - MotorDrive
www.weg.net
Technical Data - Standards
Modbus-RTU
All plug-in modules for RS485 and CFW500-CRS232 for RS232
Profibus-DP
Plug-in module CFW500-CPDP
DeviceNet
Plug-in module CFW500-CCAN
CANopen
Plug-in module CFW500-CCAN
AC input chokes
For reducing THD
AC output chokes
For longer motor cables
UL 508C
Power conversion equipment.
UL 840
Insulation coordination including clearances and creepage distances for electrical equipment.
EN 61800-5-1
Safety requirements electrical, thermal and energy.
EN 50178
Electronic equipment for use in power installations.
EN 60204-1
Safety of machinery. Electrical equipment of machines. Part 1: General requirements.
Note: For the machine to comply with this standard, the manufacturer of the machine is responsible for installing an emergency stop device and equipment to disconnect the input power supply.
EN 60146 (IEC 146)
Semiconductor converters.
EN 61800-2
Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifcations for low voltage adjustable frequency AC power drive systems.
EN 61800-3
Adjustable speed electrical power drive systems - Part 3: EMC product standard including specifc test methods.
EN 55011
Limits and methods of measurement of radio disturbance characteristics of industrial, scientifc and medical (ISM)
radio-frequency equipment.
CISPR 11
Industrial, scientifc and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics Limits and methods of measurement.
EN 61000-4-2
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 2: Electrostatic discharge
immunity test.
EN 61000-4-3
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 3: Radiated, radio-frequency,
electromagnetic feld immunity test.
EN 61000-4-4
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 4: Electrical fast transient/
burst immunity test.
EN 61000-4-5
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test.
EN 61000-4-6
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 6: Immunity to conducted disturbances, induced by radio-frequency fields.
EN 60529
Degrees of protection provided by enclosures (IP code).
UL 50
Enclosures for electrical equipment.
Communication
Chokes
(external as accessory)
Safety standards
Electromagnetic
Compatibility (EMC)
Standards
Mechanical construction
standards
MW500 - MotorDrive
15
WEG Worldwide Operations
WEG PINTURAS - Pulverlux
Buenos Aires
Phone: +54 11 4299 8000
tintas@weg.net
AUSTRALIA
WEG AUSTRALIA
Victoria
Phone: +61 3 9765 4600
info-au@weg.net
www.weg.net/au
AUSTRIA
WATT DRIVE - WEG Group
Markt Piesting
Phone: +43 2633 404 0
watt@wattdrive.com
www.wattdrive.com
BELGIUM
WEG BENELUX
Nivelles - Belgium
Phone: +32 67 88 84 20
info-be@weg.net
www.weg.net/be
BRAZIL
WEG EQUIPAMENTOS ELÉTRICOS
Jaraguá do Sul - Santa Catarina
Phone: +55 47 3276-4002
info-br@weg.net
www.weg.net/br
CHILE
WEG CHILE
Santiago
Phone: +56 2 784 8900
info-cl@weg.net
www.weg.net/cl
ECUADOR
WEG ECUADOR
Quito
Phone: 5144 339/342/317
wegecuador@weg.net
www.weg.net/ec
MALAYSIA
WATT EURO-DRIVE - WEG Group
Shah Alam - Selangor
Phone: 603 78591626
info@wattdrive.com.my
www.wattdrive.com
SINGAPORE
WATT EURO-DRIVE - WEG Group
Singapore
Phone: +65 6 862 2220
watteuro@watteuro.com.sg
www.wattdrive.com
FRANCE
WEG FRANCE
Saint Quentin Fallavier - Lyon
Phone: +33 4 74 99 11 35
info-fr@weg.net
www.weg.net/fr
MEXICO
WEG MEXICO
Huehuetoca
Phone: +52 55 5321 4231
info-mx@weg.net
www.weg.net/mx
WEG SINGAPORE
Singapore
Phone: +65 68589081
info-sg@weg.net
www.weg.net/sg
GERMANY
WEG GERMANY
Kerpen
Phone: +49 2237 9291 0
info-de@weg.net
www.weg.net/de
VOLTRAN - WEG Group
Tizayuca - Hidalgo
Phone: +52 77 5350 9354
www.voltran.com.mx
WEG BALINGEN
Balingen
Phone: +49 7433 9041 0
info@weg-antriebe.de
www.weg-antriebe.de
GHANA
ZEST ELECTRIC GHANA WEG Group
Accra
Phone: +233 30 27 664 90
info@zestghana.com.gh
www.zestghana.com.gh
INDIA
WEG Electric India
Bangalore - Karnataka
Phone: +91 80 4128 2007
info-in@weg.net
www.weg.net/in
WEG INDUSTRIES INDIA
Hosur - Tamil Nadu
Phone: +91 4344 301 577
info-in@weg.net
www.weg.net/in
CHINA
WEG NANTONG
Nantong - Jiangsu
Phone: +86 0513 8598 9333
info-cn@weg.net
www.weg.net/cn
ITALY
WEG ITALIA
Cinisello Balsamo - Milano
Phone: +39 02 6129 3535
info-it@weg.net
www.weg.net/it
COLOMBIA
WEG COLOMBIA
Bogotá
Phone: +57 1 416 0166
info-co@weg.net
www.weg.net/co
JAPAN
WEG ELECTRIC MOTORS
JAPAN
Yokohama City - Kanagawa
Phone: +81 45 550 3030
info-jp@weg.net
www.weg.net/jp
NETHERLANDS
WEG NETHERLANDS Oldenzaal - Overijssel
Phone: +31 541 571 080
info-nl@weg.net
www.weg.net/nl
PERU
WEG PERU
Lima
Phone:+51 1 209 7600
info-pe@weg.net
www.weg.net/pe
PORTUGAL
WEG EURO
Maia - Porto
Phone: +351 22 9477705
info-pt@weg.net
www.weg.net/pt
RUSSIA and CIS
WEG ELECTRIC CIS
Saint Petersburg
Phone: +7 812 363 2172
info-ru@weg.net
www.weg.net/ru
SOUTH AFRICA
ZEST ELECTRIC MOTORS
WEG Group
Johannesburg
Phone: +27 11 723 6000
info@zest.co.za
www.zest.co.za
SCANDINAVIA
WEG SCANDINAVIA
Mölnlycke - Sweden
Phone: +46 31 888 000
info-se@weg.net
www.weg.net/se
UK
WEG ELECTRIC MOTORS U.K.
Redditch - Worcestershire
Phone: +44 1527 513 800
info-uk@weg.net
www.weg.net/uk
UNITED ARAB EMIRATES
WEG MIDDLE EAST
Dubai
Phone: +971 4 813 0800
info-ae@weg.net
www.weg.net/ae
USA
WEG ELECTRIC
Duluth - Georgia
Phone: +1 678 249 2000
info-us@weg.net
www.weg.net/us
ELECTRIC MACHINERY WEG Group
Minneapolis - Minnesota
Phone: +1 612 378 8000
www.electricmachinery.com
VENEZUELA
WEG INDUSTRIAS VENEZUELA
Valencia - Carabobo
Phone: +58 241 821 0582
info-ve@weg.net
www.weg.net/ve
SPAIN
WEG IBERIA
Madrid
Phone: +34 91 655 30 08
info-es@weg.net
www.weg.net/es
For those countries where there is not a WEG own operation, find our local distributor at www.weg.net.
WEG Group - Automation Business Unit
Jaraguá do Sul - SC - Brazil
Phone: +55 47 3276 4000
automacao@weg.net
www.weg.net
Cod: 50051392 | Rev: 00 | Date (m/y): 11/2014
The values shown are subject to change without prior notice.
ARGENTINA
WEG EQUIPAMIENTOS
ELECTRICOS
San Francisco - Cordoba
Phone: +54 3564 421 484
info-ar@weg.net
www.weg.net/ar