1.2 Liter, 1 Liter
BLENDERS
1 Liter Laboratory Blenders
Variable speed
One speed
Variable speed
One speed
Two Speeds
Two Speeds+Timer
800S
LB20S
S.S Container
S.S Container
LB20G
800G
Glass Container
Glass Container
8011S
800G/S Capacity: 1 liter/1.2 liters
Switch Settings: one speed
Base: Die cast epoxy
coated base
Container: Stainless steel
with handle and two-piece
vinyl and styrene lid – 800S.
Heat-resistant glass with
handle and two-piece vinyl
and styrene lid –800G.
Overall height: (35.5/40.5cm).
8010S
8011G/S Capacity: 1 liter/1.2 liters
Switch Settings: two speed
Base: Die cast epoxy
coated base
Container: Stainless steel
with handle and two-piece
vinyl & styrene lid – 8011S.
Heat-resistant glass with
handle and two-piece vinyl
and styrene lid – 8011G.
Overall height: (38/40.5cm).
8010G/S Capacity: 1 liter/1.2 liters
Switch Settings: two speed,
3 minute mechanical timer
Base: Die cast epoxy
coated base
Container: Stainless steel
with handle and two-piece
vinyl and styrene lid – 8010S.
Heat-resistant glass with
handle and two-piece vinyl
and styrene lid – 8010G.
Overall height: (38/40.5cm).
Rated Volts
LB20EG/S Capacity: 1 liter/1.2 liters
Switch Settings: Variable
speed 0 – 20,000 RPM, for
mixing, stirring, blending,
or homogenizing
Base: Die-cast epoxy
coated base
Container: Stainless steel
with handle and twopiece vinyl and styrene
lid – LB20ES.
Heat-resistant glass with
handle & two-piece vinyl &
styrene lid – LB20EG.
Model
Container Replacement
Rated Amps
Peak HP
800S
S.S. CAC33
1.8
.40
800G
Glass CAC32
1.8
.40
8010S
S.S. CAC33
1.8
.40
8010G
Glass CAC32
1.8
8011S
S.S. CAC33
1.8
8011G
Glass CAC32
1.8
.40
LB20ES
S.S. CAC33
1.5
.40
LB20EG
Glass CAC32
1.5
.40
No-Load RPM
High 22,000
230 volts, 50/60
Hz
.40
.40
Low 18,000
High 22,000
+Timer
Low 18,000
High 22,000
Variable Speed
0 – 20,000
BLENDERS
2 Liter
HGBSS, 2 Liter Laboratory Blender
HGBSS
Please note that container assemblies
are not autoclavable in normal
configuration, as washers & seals will
eventually break down. Two-piece lids
are also not autoclavable.
● Heavy-duty 1.5 HP motor ● 2 speeds – Lo (19,000 RPM), Hi (23,000 RPM)
● Stainless steel 2 liter container: HGB550–230VAC, 50/60Hz, Non-CE.
HGB55E–230 VAC, 50Hz, CE ● Polycarbonate 2liter container:
HGB500–230VAC, 50/60Hz, Non-CE. HGB50E–230 VAC, 50Hz, CE.
SS810, 2 Liter S.S.
Container
● 2liter stainless steel
container and
handle
● One piece stainless
steel lid & knob
● Fits all 2liter MRC
laboratory blenders.
CAC21, 1.4 Liter
Container
● Polycarbonate
container complete
with lid & blending
assembly.
CAC31, 2 Liter S.S.
Container
● 2liter stainless steel
container and
handle
● Two piece lid
● Fits all 2liter MRC
laboratory blenders.
SS715, 1 Liter Stainless
Steel Container
● Stainless steel container
complete with
polystyrene lid and
blending assembly.
CAC59, 2 Liter
Container
● Polycarbonate
container complete
with lid & blending
assembly.
CAC69, Clutch Repair Kit
● Clutch repair kit for 2-liter
blenders – 2 pack.
AD2, 2Liter Adapter
● Allows use of 1liter
and smaller
containers on
2liter motor units.
CAC15, Hot Blending Lid
● Hot blending lid for
2-liter stainless steel
blender containers only.
MX1000XTXEE, Hi-Power Blender
● Heavy-duty 3½ peak HP motor
● 32,000 RPM bare motor speed, 1500 watts
● Simple High, Low, Off and Pulse paddle switches
● One-piece dishwasher-safe removable jar pad
● 2-liter BPA-free copolyester container
● 230 VAC, 50 Hz, 6.5 amps
● CE, RoHS
● Also available in 60 Hz.
MX1100XTXEE, Hi-Power Blender with Timer
● Heavy-duty 3½ peak HP motor
● 32,000 RPM bare motor speed, 1500 watts
● Easy-to-clean electronic membrane keypad
with simple On/Off, High, Low,
Stop and Pulse controls
● 30-second electronic countdown timer
● One-piece dishwasher-safe removable jar pad
● 2-liter BPA-free copolyester container
● 230 VAC, 50 Hz, 6.5 amps
● CE, RoHS
● Also available in 60 Hz.
MX1000XTXEE
SE1000, Large
Sound Enclosure
● Retro-fits all
blenders in MRC
Commercial
Xtreme Series —
Half-Gallon Jars.
MX1100XTXEE
CAC90I, Stainless
Steel Containers
● 2-liter stainless
steel container.
4 Liter/Mixer
BLENDERS
24CB10C, 4 Liter Laboratory Blender
● The Standard in Handling. provides two handles for safer, easier lifting,
pouring and carrying.
● The Standard in Long Service. sealed, precision, high-tech ball bearing
system extends the life of our blenders.
● The Standard in Design and Control. Ergonomic classic design makes the
unit easier to lift. Easy to clean electronic membrane control panel with
Pulse Mode provides precision operation.
● The Standard in Quiet Operation. encases its industry-leading 3.75-HP
motor for quiet operation.
● The Standard in Stability. Deeper, wider, full traction rubber non-skid feet
keep the blender stable.
● Capacity: 4 Liters.
● Switch Settings: Off - Lo - Med - Hi - Pulse.
● Base: Die-cast gray epoxy coating.
● Overall Height: 26 inches
● Weight: Net shipping weight 38 lbs.
● Heavy-duty 3.75 HP motor
● Stainless steel 4-liter container with 2 handles for increased safety & easier
handling
● Low (15,800 RPM), Med (18,000RPM), Hi/Pulse (20,800RPM).
LBC10
501697
● Blade assembly with carbon bearing
and neoprene seals for 4-liter blenders
(not shown).
Please note that container assemblies
are not autoclavable in normal
configuration, as washers & seals will
eventually break down. Two-piece lids
are also not autoclavable.
CBL10, Hot Blending Lid
● Polycarbonate Hot Blending
Lid for 4-liter blender.
AD1, 4 Liter Adapter
● Allows use of 1liter and
smaller containers on 4liter
motor units.
2610F, 4 Liter Foam
2610T, 4 Liter Temp.
Arrestor
Control Coil
● Adjustable baffle used to
● Stainless steel coil for
reduce foam in media
use with 2610C or
● For use with 2610C or
standard 4-liter CAC70
standard 4-liter CAC70
containers
● Water circulated through helical
containers
coil cools media being processed ● Comes complete with cover &
● Comes complete with cover and
gasket.
gasket.
CAC72, 4 Liter
Container
● 4liter stainless steel
2610C, 4 Liter Cool
container with 2
Base Container
handles &
● 4liter stainless steel
polycarbonate lid.
container with
jacketed base,
CAC70, 4 Liter
allowing for water cooling of
Container
bearing during extended
● 4liter stainless steel
operation periods
container with 2 handles
● Unit does not include lid or cover
& stainless lid.
gasket.
DMX20M/DME20E, Lab Mixers
● Two speeds: High 20,000 RPM, Low 15,000 RPM
● Commercial motor/durable housing/shock resistant rubber mounts
● Lifetime sealed ball bearing
● Easy to clean removable front panel
● Two agitators included: butterfly agitator and solid agitator
● 28-ounce (0.83-liter) stainless steel container included
● Switch settings: Off-On-Pulse
● Rating: 230 volts – 50/60Hz - .5 Amps
● UL, NSF (DMX20M); CE (DM20M).
DMX20M
CAC20, Mixer Container
● Stainless steel container
20-ounce/ 0.83-liter
capacity
CAC08, Butterfly Agitator
● Stainless steel agitator
CAC09, Solid Agitator
with Screw
● Stainless steel agitator
BLENDERS
Processor/Grinders
WFP14SE,
3.35-Liter Batch Bowl Processor
● LiquiLock® Seal System
● High-performance 1 HP motor
● Included processing accessories:
– Sealed, serrated S-blade (WFP14S1)
– 5⁄64”(2 mm) slicing disc (WFP145)
– 5⁄32”(4 mm) shredding disc (WFP144)
● Easy ON & PULSE/OFF control paddles
● Extra-large feed tube and pusher
● 230 VAC, 50 Hz, 2.6 amps
● CE, RoHS.
WFP14S5K, Continuous-Feed Chute
Cover
WFP14S2,
Batch
Bowl
WFP14S3K,
Batch Bowl
Cover
WFP14S4,
Continuous-Feed
Chute
WFP14SE
WSG30E, Lab Grinder/Pulverizer
● High-performance commercial-grade
motor – 19,000 RPM
● Heavy-duty brushed stainless steel housing
with safety interlock lid
● PULSE actuation to easily manage
consistency of grind
● Includes 3 fully removable and
dishwasher-safe stainless steel grinding
bowls with convenient storage lids
● Durable stainless steel blades
● 230 VAC, 50 Hz, 175 W, 0.76 amps
● CE, RoHS.
WSG30E
WCG75E
WCG75E, Chopper Grinder
● Chopping assembly: 0.7-liter work bowl,
2-blade hub, cover with 2
protected openings for adding ingredients
while processing
● Grinding assembly: 0.7-liter work bowl,
3-blade hub, sealed cover with
handle
● Hi-speed 2-pole induction motor
● Bowl assemblies stack for storage
● 230 VAC, 50/60 Hz, 0.9 amps
● RoHS.
CAC-103
Immersion Blenders
BLENDERS
WSB25XE, Quick Stick Xpress Cordless
Immersion Blender
WSB33E, Light Duty
Immersion Blender
● 2-speed operation, 13,000 RPM on
High
● 9.6 volt NiMH rechargeable battery
pack
● Up to 30-minute run time on single
charge
● High-speed wall-mountable
recharging station
● Stainless steel 25.5 cm fixed shaft
and blade
● 23-liter capacity
● CE, RoHS.
● 7” fixed shaft, 11.4-liter capacity
● 2-speed fingertip control:
Off-Hi-Lo
● High-efficiency motor
● All-purpose stainless steel blade
● 6-foot (183cm) cord with 2 prong
plug
● 230 volts, 50 Hz, 0.4 amps
● CE, RoHS.
WSB33E
WSB25XE
WSBPPE,
Power Pack
● Fits all heavyduty Big Stix
● 230 VAC
WSB01,
Bowl
Clamp
for handsfree
operation
WSB40E, Medium-Duty
Quik Stik Plus
● ½ HP, 2-speed heavy-duty motor
● 25.5-cm fixed shaft
● Rubberized comfort grip
● All-purpose stainless steel blade
● 23-liter capacity
● 230 volts, 50 Hz, 1.5 amps
● CE, RoHS.
WSBPPE,
Power Pack
● 25.5cm stainless
steel whipping
paddles
● Fits entire Big
Stix Heavy-Duty
Immersion
Blender line
● Userreplaceable
coupling
● Die-cast gears
for optimal
performance
● CE, RoHS.
WSBBC,
Wall Mount
Wall-mounted
hanger
available for
easy storage
while unit is
not in use.
WSB40E
WSB50E/55E/60E/65E/70E, Heavy-Duty
Immersion Blenders with Removable Shafts
● 1 HP heavy duty motor – 18,000 RPM on Hi
● Variable speed motor – 9 settings
● Rubberized comfort grip & second handle for safe &
controlled operation
● Continuous ON feature
● All-purpose stainless steel blade
● Completely sealed stainless steel shaft is easily
removable and dishwasher-safe
● 12-foot (365 cm) cord with 2 prong plug
● 230 volts, 50 Hz, 2.8 amps
● CE, RoHS.
WSB50E WSB55E WSB60E WSB65E WSB70E
Model
Description
WSB50E
12”/30.5cm removable shaft, 37.9liter capacity
WSB55E
14”/35.6cm removable shaft, 56.8liter capacity
WSB60E
16”/40.6cm removable shaft, 94.6liter capacity
WSB65E
18”/45.7cm removable shaft, 132.5liter capacity
WSB70E
21”/53.4cm removable shaft, 189.3liter capacity
BLENDERS
Specialty Containers and Accessories
Specialty Containers and Accessories
Please note that container assemblies are not
autoclavable in normal configuration, as washers &
seals will eventually break down. Two-piece lids are
also not autoclavable.
Specialty Blade Assemblies for 1 Liter/1.2Liter Blenders
003549, Blade Assembly with Carbon Bearing and
Teflon Washers
501088, Blade Assembly with Teflon Washers
CAC32, 1.2Liter Glass Container
● Heat-resistant glass with handle and
two-piece vinyl styrene lid.
CAC33, 1Liter Stainless Steel Container
● Stainless steel container with handle,
two-piece vinyl and styrene lid, and blending
assembly.
CAC19, 1.4Liter Container
● Polycarbonate container complete
with lid and blending assembly.
CAC64, 500 ml Container
● 500ml polypropylene container, screw cap
and standard blending assembly.
SS10, Pulverizer Stainless Steel
Container
● Stainless steel base
● Snap-tight medical grade Plastisol lid
● 75 gram dry capacity
● Reduces 10 grains of tablets to dust
in 10 seconds at 20,000 RPM
● Fits all 1-liter Waring laboratory
blenders.
S115, Dry Blending Container
● Stainless steel container and
one-piece stainless steel lid & knob
● Stainless steel base
● Unique blade for dry homogenizing
and pulverizing
● 500 ml approximate working
capacity
● Some substances require use of
adapter and large motor units
(example: soil processing requires
use of 4-liter base & AD1 adapter).
SS510S, One-Liter Sealed Cover
Container
● Stainless steel container with O-ring
type gasket for positive sealing of
cover
● Cover has stainless steel plug for
sampling
● Fits all 1-liter Waring laboratory
blenders.
SS515, One-Liter S.S. Container
● 1-liter stainless steel container and
one-piece stainless steel lid
● Standard blending assembly with
teflon gaskets
● Fits all 1-liter Waring laboratory
blenders.
SS610, One-Liter S.S. Container
● 1-liter stainless steel container, same
as CAC33 except has one-piece
stainless steel lid and knob
● Fits all 1-liter Waring laboratory
blenders.
SS510C, One-Liter Cool Base Container
● 1-liter stainless steel container
● Unit is complete with one-piece stainless
steel lid
● Fits all 1-liter Waring laboratory blenders.
SS510F/SS610F, One-Liter Foam Arrestor
● Adjustable baffle used to reduce foam
in media
● SS510F fits SS515 and SS510C
● SS610F fits SS610 and standard 1-liter
stainless steel containers with handles
● Comes complete with cover and gasket.
SS510T/SS610T, 1-Liter Temperature
Control Coil
● Stainless steel coil for use in 1-liter
stainless steel containers
● Water circulated through helical coil
cools media being processed
● Comes complete with cover and gasket
● SS510T fits SS515 and SS510C
● SS610T fits SS610 and standard 1-liter
stainless steel containers with handles.
MC1/MC2/MC3, Mini Containers
● Stainless steel containers and base for
processing small quantities
● Standard blending assembly with
stainless steel blade
● Snap-tight medical grade Plastisol lid
● Three sizes: MC1 (12-37ml), MC2
(37 – 110 ml), and MC3 (50 – 250 ml).
Blade Assemblies with Teflon Washers for Mini
Containers:
501699 – Blade assembly for MC1
501700 – Blade assembly for MC2
501701 – Blade assembly for MC3
Stomacher, Ice Crushers
BLENDERS
STO-4, Stomacher Blender
STO-4 stomacher is specificly used for microbial extraction.
Updated with LCD display which shows running state like
speed,time,program.
Support 5 type running program,each one can be setted
by user.
This stomacher microbial extraction process has been
found useful with a wide variety of samples, particularly:
solid and semi-solid products, fresh and processed meat,
dry fruits, cereals, grains, seeds, cheese, cosmetics,
pharmaceutical products, and specimen tissues.
STO-4
Blend and homogenize within sealed processing
bags—eliminating cross-contamination and cleaning
between samples
● Small footprint offers convenient placement on
your lab bench
● Increase productivity—no need to clean
equipment between processing, simply discard
bags after use
● Paddle design processes materials that cannot be
handled by conventional lab blenders.
The unique action of the Stomacher uses paddles
to homogenize samples through a combination of
crushing and stirring forces.
it can fit into safety cabinets to reduce your
exposure to hazardous materials.
During operation, the curved paddles and an island
baffle mold the bag contents into a tubular ring for
vigorous stirring and circulation of the sample from
top to bottom, extracting more organisms into
suspension than any other blending process.
Model
STO-4
Paddle speed
3-12/s
Paddle distance
Absorbance photometry
External size
380x220x330mm
Ambient temp. request
0-350C
Net weight
22kg
power
220V/50HZ or 110V 180W
Homogeneous bag
17 × 30cm
Applications: Food microbiology, biochemistry, & cell biology sample processing ● Removal of viruses & bacteria from
tissues and organs ● Sterility testing of pharmaceuticals ● Removal of organisms from tissue biopsies or fecal specimen.
IC-Series, Ice Crushers
IC70E
● ½ HP motor
● Heavy-duty stainless steel crushing blades
● Brushed stainless steel exterior
● Large chute and funnel for easy feeding
● Container holds up to 2.8 liters of crushed ice
● 240 VAC, 50 Hz, 1.5 amps
● CE, RoHS.
IC70E
IC20
IC20
● Portable and compact
● Quiet heavy-duty motor
● Special height adjustment dispenses into 1-liter or
1.4-liter blender containers as well as a variety of other
container sizes
● 2.4-liter bowl and funnel included
● Large chute opening for safe, continuous ice cube
feed
● 230 VAC, 50 Hz, 120 W, 0.5 amps
● CE, RoHS.
BLENDERS
Explosion Proof
BHL240, Hazardous Location Blender Motor
● Capacity: 1 liter
● Switch Settings:
Two-speed switch
available as an
accessory – BHLSW
● Container: 1 liter
stainless steel with
stainless lid available
separately– HL515
● Cord: not included.
Must be hard-wired
via explosion-proof
conduit
● Overall height: 37.5 cm
● Weight: 19 lbs. (8.62k)UL
Listed for use in Class 1,
Group D hazardous
BHL-240 locations.
HL515, 1-liter container, stainless steel/for BHL240
BHLSW, Two-speed switch for BHL240
Model Container Replacement Rated Amps
BHL240
HL515, 1 liter S.S.
4.0
The Standard in Safety
Depend on this Waring blender to provide optimum safety
and reliable performance when working with heat and/or
highly volatile substances.
The Hazardous Location Blender (BHL240)
Heat is generated within motor housings during normal
operation. This blender is designed to prevent the electrical
arcing and generated heat from igniting ambient
atmospheres. UL Listed.
HL515, 1 Liter Stainless Steel Container
● Stanless steel container and lid with special
teflon seals and blending assembly for BHL240
● Please note that the BHL240 will lose Class D
Explosion Resistant Rating if not used with this
container.
Please note that container assemblies are not
autoclavable in normal configuration, a washers & seals
will eventually break down. Two-piece lids are also not
autoclavable.
Rated Volts
230 volts, 50/60 Hz
Peak HP Motor & Blade No-Load RPM CE Cert.
.70
Single Phase
High 18,500
No
8017/8018, 4 Liter Explosion Proof Blender
8020 container
8017
MRC’s Explosion-Proof Blender 8017 is designed for
laboratory situations made hazardous by the blending of
mixtures containing volatile solvents. Unit features a 1.5 hp
explosion-proof motor with automatic reset thermal
protection. The 8017 is designed to accommodate a MRC
4-Liter blending container (#8020 not included).
The explosion-proof motor is UL approved (applies to motor
only) for Class l, Group C and D and Class ll, Group F and G
operation. Model 8017 is a single-speed blender operating
at 11,500 rpm. Model 8018 is a variable-speed version of
the 8017. It will provide constant torque in a speed range
from 1,150 to 11,500 rpm. Blender is powered by a PWM
scalar drive and speed is monitored by a digital display.
Although both blenders are designed to use a 4-Liter
container, you can adapt unit to fit all Eberbach blending
containers with the use of a Model 8051 adapter. Both
Model 8017 and 8018 must be installed by a qualified
electrician to preserve their explosionproof capability. Units
are supplied without container, power switch or adapter.
Features:
● Blending speed -
8017: fixed@11500rpm
8018: variable between 1150-11500rpm, displayed by digital output
● Optional power requirements - 8017: 230/460V, 50/60Hz three phase
8018: 230V, 50/60 Hz, three phase
● Power requirements 8017: 115/230V, 60Hz, 16.4/8.3Amps.
8018: 230V, 50/60Hz, 16.4 Amps
● Blender motor 8018/8017: explosion-proof single phase UL approved for Class l, Group D and Class ll
Group, F and G. Rated 1.5 hp
● Dimensions Height: 18 in without container (45cm)
Width: 10.4 in (26cm)
Length: 20.4 in (52cm)
● Weight 90 lbs (40kg)
MRC.VER.01-6.13