VTech Switch & Go Dinos - Span the Spinosaurus User`s manual

User’s Manual
TM
SPAN THE SPINOSAURUS
TM
© 2012 VTech
Printed in China
91-002765-000 US
Hi Friend,
You’re about to embark on a “dino-mite” adventure with
me, Span the Spinosaurus™! Just so you know, I’ve been
specially created just for you and am part of the VTech®
Switch & Go Dinos™ crew! Switch & Go Dinos™ are a
special breed of dinosaurs that transform from vehicle to
dino in a few easy steps. You’re going to love playing with
me!
Not only can you help me do some wicked transformations,
but you can help me do other cool things, too! Customize
me by choosing my eyes in dino mode or picking a pilot
when I’m in vehicle mode! Try pushing me on the ground
or pressing a button and you’ll hear me make awesome
sounds! Press another button to hear me talk, and I’ll tell
you all about my wild life as a dinosaur! Maybe you’ll even
learn a thing or two.
For more fun, be sure to check out the rest of the Switch &
Go Dinos™ crew (each sold separately)! And remember,
with me you’re in for some dino switchin’, high flyin’ fun!
Your pal,
Span the Spinosaurus™
INTRODUCTION
I’m Span the SpinosaurusTM, and I’m the biggest carnivore of all time!
My huge size, long jaws, and sharp teeth make me a meat-eating
machine. And if that doesn’t scare you, the massive sail on my back will!
Let me give you some advice. When you see the sail, you better bail!
As a dinosaur I rule the land and the water, and as a plane I rule the skies!
I can turn into a super-fast jet fighter and fly faster than the speed of
sound! That means I’ll be on top of you before you even hear me coming!
Tail Button
Volume Button
LCD Screen
Talk Button
Style Button
Launchers
Sound Button
Introduction
ON/OFF Switch
2
INCLUDED IN THIS PACKAGE
• One VTech® SWITCH & GO DINOSTM: Span the SpinosaurusTM
• One user’s manual
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches et étiquettes. Ils ne font pas partie du jouet.
NOTE:
Please keep the user’s manual as it contains important
information.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
Getting Started
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks and tags are not part of this toy, and should be discarded
for your child’s safety.
2. Locate the battery cover on
the bottom of the unit. Use a
screwdriver to loosen the screw.
3. Install 2 new “AA” (LR6/AM-3)
batteries into the main unit following
the diagram inside the battery box.
(The use of new, alkaline batteries
is recommended for maximum
performance.)
4. Replace the battery cover and
tighten the screw to secure.
3
•
Use new alkaline batteries for maximum performance.
•
Use only batteries of the same or equivalent type as recommended.
•
Do not mix different types of batteries: alkaline, standard (carbonzinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
•
Do not use damaged batteries.
•
Insert batteries with the correct polarity.
•
Do not short-circuit the battery terminals.
•
Remove exhausted batteries from the toy.
•
Remove batteries during long periods of non-use.
•
Do not dispose of batteries in fire.
•
Do not charge non-rechargeable batteries.
•
Remove rechargeable batteries from the toy before charging (if
removable).
•
Rechargeable batteries are only to be charged under adult
supervision.
PRODUCT FEATURES
Battery Notice
BATTERY NOTICE
1. TURNING THE UNIT ON
Slide the ON/OFF Switch to ON to turn the unit ON.
2. MOTION SENSOR
Move the plane to hear awesome flying
sounds.
4
3. STYLE BUTTON
Press the Style Button to choose a pilot or
change the dino eyes.
4. TALK BUTTON
Press the Talk Button to hear the dino or
pilot talk.
5. SOUND BUTTON
Press the Sound Button to hear cool sound
effects.
6. VOLUME BUTTON
Press the Volume Button to adjust the
volume.
7. TAIL BUTTON
Press the Tail Button to make the dino
chomp and roar.
Note: The dinosaur’s head must be pulled
all the way out in order for the Tail Button
to work.
Product Features
8. FOOD DISCS
Load the Food Discs into the launchers
and press the buttons to watch them fly.
5
9. LAUNCHERS
Press the Launchers to launch the food
discs.
10. DINO CAGE AND BABY DINO
Press the button to open the Dino Cage
and free the Baby Dino.
11. RESCUE LIFT
Use the Rescue Lift to carry the cage and
other Switch & Go Dinos too.
12.REATTACHING THE DINO JAW
If the dinosaur jaw falls off, please follow the steps below to reattach it.
1) Turn the dinosaur upside down and insert the cylinder on the side
of the jaw into the hole on the underside of the head.
2) Fit the holes on each side of the jaw over the blue knobs under
the head.
1
2
Product Features
3
13. TURNING THE UNIT OFF/ AUTOMATIC SHUT-OFF
Slide the ON/OFF Switch to OFF or hold the Talk Button / Sound
Button for a few seconds to turn the unit OFF.
To preserve battery life, the unit will automatically power-off after
several minutes without input.
6
1. Plane shape.
2. Move the landing gear on the
bottom of the plane back.
3. Move the sides of the tail in. Then
move the whole tail down.
4. Rotate the nose of the plane
down.
5. Pull the head out.
6. Rotate each of the wings
180 degrees so that they’re
facing backwards.
How to Switch
HOW TO SWITCH THE PLANE TO A DINO
7
8. Move the spine up.
1:1
Note: To change the dino back into a plane, reverse the order of the
steps above.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on a hard surface and do not expose the unit
to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working, please follow these steps:
Turn the unit OFF.
Interrupt the power supply by removing the batteries.
Let the unit stand for a few minutes, then replace the batteries.
Turn the unit ON. The unit should now be ready to play again.
If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
1.
2.
3.
4.
5.
Care & Maintenance / Troubleshooting
7. Flip each of the wings down and
pull the feet down.
8
NOTE:
FCC information: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note
• Increase the separation between the equipment and receiver.
Caution: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
9