1
2
“More than 55 years of
passion and creativity
in music”.
Back in 1954 the music industry was, except for a few big players, a
meeting place for music lovers and fanatics who found it difficult to
find in the market what their ears or minds really wanted in terms of
natural music reproduction.
This situation resulted in a number of esoteric brands entering the
market, with largely hand crafted “one off” equipment, without being
distracted too much by decidedly un-cool considerations such as production economies or even profit.
ROger DEClerck was one of these fine engineers who initially designed
and produced products for himself and a number of close friends, as
well as making modifications to existing equipment to improve sound.
He opened his first store in Antwerp where music addicts were more
than welcome to live their passion.
3
HISTORY
Back in 1954 the music industry was, except for a few big players, a meeting place for music lovers and
fanatics who found it difficult to find in the market what their ears or minds really wanted in terms of
natural music reproduction.
This situation resulted in a number of esoteric brands entering the market, with largely hand crafted
“one off ” equipment, without being distracted too much by decidedly un-cool considerations such as
production economies or even profit.
ROger DEClerck was one of these fine engineers who initially designed and produced products for
himself and a number of close friends, as well as making modifications to existing equipment to
improve sound. He opened his first store in Antwerp where music addicts were more than welcome to
live their passion.
in 1954
RODEC RADIO Store
ROger DEClerck’s first
of Antwerp - Belgium
Based in the city centre
ROger DEClerck founde
r of the Rodec Brand name
in 1954
Born 1930 in Antwerp Belgium
The name RODEC was born, with initially a limited range of valve amplifiers, mono, and a number
of specific “one-off ” products, built on special order only. From there on, RODEC embarked on the
design of a number of “mobile” units like the P418 and ancestors, that were mainly used at
presentations, shows and fancy fairs as sound enforcement for public announcements.
RODEC
4
According to the memory of those pioneers of the early days, as early production archives are non-existing,
the first RODEC mixers appear around 1970, when the decision was made to offer a number of high quality
preamplifiers which offered a most creative feature whereby one source could be faded out, while another
source could be faded in. The audio mixer - as the workhorse of the DJ- was born!
With this reputation of producing sturdy equipment, RODEC rapidly became the
standard in many fixed and mobile music systems in the entertainment industry, being
one of the very first to introduce a number of features which invariably set the standard
throughout the entire industry.
These models were known as CU881, CU882, CU888 and 1572, each consequent model
offering higher and more specifications than the previous one.
With these preamps a number of power amps were available, always within the same basic
philosophy that sound performance and build quality had to be immaculate.
A 1977 standard European setup
2 x Technics SL-1200 Turntables and a RODEC Mixetta mixer
5
The RODEC logo first appeared as a sticker to promote the RODEC Sound Machines around 1975.
The first mixer with the RODEC logo was the Mixfan in 1977.
RODEC RADIO Business Card (1954)
Rodec 25th anniversary Export Business Card (1979)
RODEC 25th Anniversary (1954-1979) at the top of the disco era
Indtroduction of the RODEC Disco-Mix mixer and Disco-Max amplifier
A typical RODEC Dealer show in the Late 70’s
The RODEC 25th Anniversary catalogue
To name just a few, as far back as 1970 where RODEC introduced talk-over, gain per channel and
equalisation, resulting in the final evolution to MX-18 with triple tone control per input channel.
This feature has since been copied all over the world up to the nearly identical frequencies as used
by RODEC.
6
The RODEC SM200 & SM300 dominated the pro-audio sales in the early 80’s Gain per channel, 2 masters with tonecontrole, seperate mic channel with Talk-over & tone-controle, multiple inputs per channel,multiple aux & record outputs ...
The RODEC Disco-mix mixer and Disco-Max amplifier
Some preserved reviews - Denmark - 1981
The RODEC MX18 SUCCESS STORY (1986-2010)
THE RODEC “REFERENCE” MX18 a global winner in 1986
20 Years later still the basics for a professional mixer
THE RODEC MX180 RED Limited Edition / 10 Years MX180 - 1996
Extra features: Special red faceplate, standard XLR output,
standard phones remote control per channel and special handles.
THE RODEC MX180 successor of the MX18 introduced in
1990. The most important new features were the crossfader
and the XLR output option for master 1
The RODEC MX18 promotion campaign in Korea 1987
THE RODEC MX180 MKII introduced in 1997. The most
important adjustments were the integration of RFI filters on all
inputs needed to get CE approval.
THE RODEC MX180 Limited 50th Anniversary
Edition Introduced in 2004 for 50 years RODEC
Limited production of 500pcs Max runtime till 2006
- 20 Years MX18 ...
THE RODEC MX180 MKIII introduced in 1999, 3 Master outputs,
Balance per channel, Dual stereo VU meter, Second headpone output,
VU Signal selector, Standard XLR output ...
The pioneering days of solitary engineering genius in a garage converted to
a workshop are gone, but the need for product update has not. Today, the
RODEC R&D department is on-line with professional DJ’s all over the world,
music lovers as well as fanatics, to make sure RODEC continues to design
what they want, today and tomorrow.
Front panel in high-end brushed aluminium 6mm
thick with 50 year rings. Red illuminating RODEC
logo 2 x Balanced outputs, EFX insert, Phones
PFL/Mix, Mic XLR/Jack Combo ...
The RODEC MX180 Original
More than 55 years of High-End research, design
and development to any professional user and lover
of analogue music. It has been a reference product
for many years, and although a new ‘progressive’
range has meanwhile been introduced it will
remain this reference for many years to come in the
pure analogue field.
7
FEATURES
8 Channel 19” 8HE Professional Audio Mixer
7 Multiple input channels with:
Gain
Triple tone control +10dB / - 21dB
Dual wet & dry FX-Assign (World’s First)
Balance
PFL (cue)
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
1:
2:
3:
4:
5:
Balanced XLR Mic, phono, RCA Line
Balanced XLR Mic, phono, RCA Line
Balanced XLR Mic, phono, RCA Line
Balanced XLR Mic, phono, RCA Line
Balanced XLR Mic, phono, RCA Line
USB in (option)
6: Balanced XLR Mic, phono, RCA Line
USB in (option)
7: Balanced XLR Mic, phono, RCA Line
the front panel, USB in (option)
8: Separate balanced XLR Mic channel
talk-over, pan, PFL and FX insert
A,
A,
A,
A,
A,
RCA Line B
RCA Line B
RCA Line B
RCA Line B
digital S/P DIF Line B, A, digital S/P DIF Line B, A, digital S/P DIF Line B on with gain, triple tone control, 7 Phono Inputs
11 RCA Line Inputs
8 Balanced XLR Mic inputs
3 Digital S/P DIF Line inputs
3 USB inputs (option)
3 Master outputs with dual wet & dry FX-Assign
Master 1 (Main):
RCA and balanced XLR output with mono/stereo mode
Master 2 (Main):
Balanced XLR output with mono/stereo mode
Master 3 (Monitor): Balanced XLR output with mono/stereo mode,
Dual tone control (high & low), without DJ Mic
Record Outputs
4 RCA record outputs
4 S/P DIF digital record output (1 connector on the frontpanel)
3 USB record output (option)
+ or – DJ Mic
Faders – Crossfader
All channel & cross fader-functions are micro-processor controlled
All faders are easy replaceable by removing the aluminium plate
Assignable Crossfader with curve adjust identical to our Rodec Scratchbox
PRODUCT INFO
8
The MX3000 is the flagship of our new RODEC “Progressive” series. This progressive
range raises our sound quality to the highest level of immaculate studio sound. The core
philosophy of solid construction, reliability, modular design and the unique analogue
sound all feature in the entire progressive range.
The RODEC brand stands for the highest quality in audio today, designed and manufactured in Belgium, Europe.
Ultimate connectivity and sheer performance make the MX3000 the ideal choice for
large club installations, festivals, events and sound professionals world wide. Still in 19
inch format, with the typical angled chassis as with our traditional mixers, the MX3000
will allow you to connect any source you can imagine in a fixed set-up, with the additional feature of analogue in and digital out (S/P DIF) on the front panel. Dual wet and
dry FX-Assign option make this workhorse the ultimate tool for any creative DJ. The
alarm mode and green construction make this model the responsible choice for any
ecologically and environmentally aware user or owner.
Headphones
2 Headphones outputs front (DJ) & rear (LJ) both can be used at the same time
World’s strongest DJ headphones amplifier
Headphones select rotary PFL/SUM
Illuminated PFL buttons
Alarm / music mute in / Priority in with volume level rotary (option)
When emergency signal appears, all music will be muted
Alarm / music mute in can also be used as remote volume control
DJ Microphone keeps working during the activation of the music mute function
Priority RCA in can be used to transmit an alarm signal or recorded message
Power supply
Internal universal switching power supply 90V <> 264V.
SPECIFICATIONS
110.0mm (4.3“)
Nominal analogue input levels:
Line A asymmetrical (RCA): 500mV / 50kW
Line B asymmetrical (RCA): 500mV / 50kW
Phono asymmetrical (RCA gold plated): 5.2mV / 50kW
Microphone (channel 1 – 7) symmetrical (XLR): 9.1mV / 3.6kW
Microphone symmetrical (XLR or 1/4” TRS JACK): 4.2mV / 1.8kW
Effects return (1/4” TRS JACK): 775mV / 10kW
Priority in (optional) (RCA): 500mV / 1.5kW
442.0mm (17.4“)
343.0mm (13.5“)
482.0mm (19.0”)
OPTIONS
USB I/O set for progressive series
Optional USB input / output kit to connect the mixing panel
to a computer • The USB connector contains 1 stereo input
signal and 1 stereo record output signal • With this option
music can be played from a computer via USB. • Simultaneous the mixed music can be recorded via the computer
Order code: 94 001 0070
Headphones (1/4” TRS JACK):
8W (1kHz – 1%THD) 417mW (1.8V) / 1.1W music power
32W (1kHz – 1%THD) 1.0W (5.7V) / 1.7W music power
600W (1kHz – 1%THD) 520mW (17.7V) / 0.6W music power
Digital input:
Line B (RCA): S/P DIF IEC 958 type II 32kHz – 192kHz
USB (optional): 32kHz - 48kHz 16bit
355.0mm (14.0“) (8HE)
Alarm / music mute in / Priority in with volume level rotary
when emergency signal appears, all music will be muted •
Alarm / music mute in can also be used as remote volume
control • DJ Microphone keeps working during the activation of the music mute function • Priority RCA in can be
used to transmit an alarm signal or recorded message
Order code: 94 001 0071
Digital output:
Record (RCA): S/P DIF IEC 958 type II 44.1kHz
USB (optional): 11.025kHz - 48kHz 16bit
Music equalizer:
Low: +10dB / -21dB at 100Hz
Mid: +10dB / -21dB at 1kHz
High: +10dB / -21dB at 10kHz
Digital optical channel fader set
Users can upgrade their mixing panel with digital faders on
the music input channels • The digital faders replace the
standard analogue faders
Order code: 94 001 0072
Microphone equalizer:
Low: +12dB / -12dB at 100Hz
Mid: +12dB / -12dB at 1kHz
High: +12dB / -12dB at 10kHz
Digital optical crossfader
The standard analogue crossfader can be upgraded by a
digital optical crossfader
Order code: 94 001 0073
BLISTERED SPARE PARTS
Standard CROSS FADER
Order code: 94 001 0064
Standard mono CHANNEL FADER
Order code: 94 001 0078
Standard MIC CHANNEL FADER
Order code: 94 001 0079
Standard MASTER CHANNEL FADER
Order code: 94 001 0080
Standard ROTARY KNOBS SET
Order code: 94 001 0074
Standard FADER KNOBS SET
Order code: 94 001 0041
Nominal analogue output levels:
Master 1 asymmetrical (RCA): 775mV / 10kW
Master 1 symmetrical (XLR): 1.55V / 600W
Master 2 symmetrical (XLR): 1.55V / 600W
Monitor symmetrical (XLR): 1.55V / 600W
Record asymmetrical (RCA): 500mV / 10kW
Effects send asymmetrical (1/4” TRS JACK): 775mV / 10kW
Monitor output equalizer:
Low: +12dB / -12dB at 100Hz
High: +12dB / -12dB at 10kHz
Frontpanel dimensions (W x D): 482.0mm (19.0”) x 355.0mm (14.0“) (8HE) • Bottombox
dim. (W x D x H): 442.0mm (17.4“) x 343.0mm (13.5“) x 110.0mm (4.3“) • Panel cut
out dimensions (W x D): 446.0mm (17.6“) x 347.0mm (13.7“) • Packed box dimensions
(W x D x H): 523.0mm (20.6“) x 414.0mm (16.3“) x 207.0mm (8.1“) • Weight: 7.22kg
(15.92lbs) • Packed weight: 8.36kg (18.43lbs)
General specifications:
Frequency response: +/- 0.25 dB from 20Hz to 20kHz
Subsonic filter: -25dB at 10Hz
Signal headroom: 20.0dB @ 1kHz / THD < 0.05%
Dynamic range: 103dB
Signal to noise ratio: 90dB
Total harmonic distortion: < 0.006%
Crosstalk left to right of an input channel: >60dB @ 1kHz
Crosstalk channel to channel: >86dB @ 1kHz
Power supply voltage: 90VAC – 264VAC
Power supply frequency: 47Hz – 63Hz
Power consumption: 58W (On), 84W (Full load), 6W (Stand by)
Operating temperature: 0°C (32°F) – 40°C (104°F)
Operating humidity: 5% - 90% (no condensation)
9
FEATURES
6 Channel 12 1/2” Professional Audio Mixer
5 Multiple input channels with:
Gain
Triple tone control +10dB / - 21dB
Dual wet & dry FX-Assign (World’s First)
Balance
PFL (cue)
Channel
Channel
Channel
Channel
Channel
Channel
5
8
6
2
2
1: Balanced XLR Mic, phono, RCA Line A,
digital S/P DIF Line B - USB in (option)
2: Balanced XLR Mic, phono, RCA Line A, RCA Line B
3: Balanced XLR Mic, phono, RCA Line A, RCA Line B
4: Balanced XLR Mic, phono, RCA Line A, RCA Line B
5: Balanced XLR Mic, phono, RCA Line A,
digital S/P DIF Line B - USB in (option)
6: Separate balanced XLR Mic channel with gain,
triple tone control, talk-over, pan, PFL and FX insert
Phono Inputs
RCA Line Inputs
Balanced XLR Mic inputs
Digital S/P DIF Line inputs
USB inputs (option)
2 Master outputs with dual wet & dry FX-Assign
Master 1 (Main):
RCA and balanced XLR output with
mono/stereo mode
Master 2 (Monitor): Balanced XLR output with mono/stereo mode, Dual tone control (high & low), without DJ Mic
Record Outputs
3 RCA record outputs
2 S/P DIF digital record output
2 USB record output (option)
+ or – DJ Mic
Faders – Crossfader
All channel & cross fader-functions are micro-processor controlled.
All faders are easy replaceable by removing the aluminium plate
Assignable Crossfader with curve adjust identical to our Rodec
Scratchbox
Headphones
2 Headphones outputs front (DJ) & rear (LJ) both can be used at the
same timeWorld’s strongest DJ headphones amplifier
Headphones select rotary PFL/SUM
Illuminated PFL buttons
Power supply
Internal universal switching power suply 90V <> 264V
PRODUCTINFO
10
The MX2000 is the absolute newcomer in the new RODEC “Progressive” series. It is built up
in an identical manner as all other “Progressive” range models, but with a different approach
as to the specific demands of the set-up. Although being a 6 channel mixer, all is housed in a
relatively compact 12 ½” housing with a (for RODEC unconventional) non angled chassis, ideal
to be placed between any type of source when space is limited. Again with standard features
such as Dual wet and dry F/X assign option and the optional digital in/out the creative as well
as the responsible and ecological user will approve of your choice.
The RODEC brand stands for the highest quality in audio today, designed and manufactured
in Belgium, Europe.
High connectivity and sheer performance make the MX2200 the ideal compact choice for large
club installations, festivals, events and sound professionals world wide.
SPECIFICATIONS
110.0mm (4.3“)
Nominal analogue input levels:
Line A asymmetrical (RCA): 500mV / 50kW
Line B asymmetrical (RCA): 500mV / 50kW
Phono asymmetrical (RCA gold plated): 5.2mV / 50kW
Microphone (channel 1 – 5) symmetrical (XLR): 9.1mV / 3.6kW
Microphone symmetrical (XLR or 1/4” TRS JACK): 4.2mV / 1.8kW
Effects return (1/4” TRS JACK): 775mV / 10kW
Nominal analogue output levels:
Master 1 asymmetrical (RCA): 775mV / 10kW
Master 1 symmetrical (XLR): 1.55V / 600W
Monitor symmetrical (XLR): 1.55V / 600W
Record asymmetrical (RCA): 500mV / 10kW
Effects send asymmetrical (1/4” TRS JACK): 775mV / 10kW
Headphones (1/4” TRS JACK):
8W (1kHz – 1%THD) 417mW (1.8V) / 1.1W music power
32W (1kHz – 1%THD) 1.0W (5.7V) / 1.7W music power
600W (1kHz – 1%THD) 520mW (17.7V) / 0.6W music power
343.0mm (13.5“)
312.0mm (12.3“)
320.0mm (12.6”)
Digital input:
Line B (RCA): S/P DIF IEC 958 type II 32kHz – 192kHz
USB (optional): 32kHz - 48kHz 16bit
Music equalizer:
Low: +10dB / -21dB at 100Hz
Mid: +10dB / -21dB at 1kHz
High: +10dB / -21dB at 10kHz
Microphone equalizer:
Low: +12dB / -12dB at 100Hz
Mid: +12dB / -12dB at 1kHz
High: +12dB / -12dB at 10kHz
Monitor output equalizer:
Low: +12dB / -12dB at 100Hz
High: +12dB / -12dB at 10kHz
General specifications:
Frequency response: +/- 0.25 dB from 20Hz to 20kHz
Subsonic filter: -25dB at 10Hz
Signal headroom: 20.0dB @ 1kHz / THD < 0.05%
Dynamic range: 103dB
Signal to noise ratio: 90dB
Total harmonic distortion: < 0.006%
Crosstalk left to right of an input channel: >60dB @ 1kHz Crosstalk
channel to channel: >86dB @ 1kHz
Power supply voltage: 90VAC – 264VAC
Power supply frequency: 47Hz – 63Hz
Power consumption: 45W (On), 68W (Full load), 6W (Stand by)
Operating temperature: 0°C (32°F) – 40°C (104°F)
Operating humidity: 5% - 90% (no condensation)
OPTIONS
USB I/O set
Optional USB input / output kit to connect the mixing panel to a computer • The USB connector contains 1 stereo input signal and 1 stereo
record output signal • With this option music can be played from a
computer via USB • Simultaneous the mixed music can be recorded
via the computer
Order code: 94 001 0070
Digital optical channel fader set
Users can upgrade their mixing panel with digital faders on the music
input channels • The digital faders replace the standard analogue faders
Order code: 94 001 0072
355.0mm (14.0“) (8HE)
Digital output:
Record (RCA): S/P DIF IEC 958 type II 44.1kHz
USB (optional): 11.025kHz - 48kHz 16bit
Digital optical crossfader set
The standard anlogue crossfader can be upgraded by a digital optical
crossfader
Order code: 94 001 0073
BLISTERED SPARE PARTS
Standard CROSS FADER
Order code: 94 001 0064
Standard mono CHANNEL FADER
Order code: 94 001 0078
Standard MIC CHANNEL FADER
Order code: 94 001 0079
Standard MASTER CHANNEL FADER
Order code: 94 001 0080
Standard rotary knobs set
Order code: 94 001 0074
Standard fader knobs set
Order code: 94 001 0041
Frontpanel dimensions (W x D): 320.0mm (12.6”) x 355.0mm (14.0“) (8HE) •
Bottombox dim. (W x D x H): 312.0mm (12.3“) x 343.0mm (13.5“) x 110.0mm
(4.3“) • Panel cut out dimensions (W x D): 316.0mm (12.4“) x 347.0mm (13.7“)
• Packed box dimensions (W x D x H): 410.0mm (16.2“) x 414.0mm (16.3“) x
207.0mm (8.1“) • Weight: 5.54kg (12.21lbs) • Packed weight: 6.70kg (14.77lbs)
11
FEATURES
5 Channel 19” Professional Audio Mixer
4 Multiple input channels with:
Gain
Triple tone control +10dB / - 21dB
Dual wet & dry FX-Assign (World’s First)
Balance
PFL (cue)
Channel
Channel
Channel
Channel
Channel
4
6
5
2
2
1: Balanced XLR Mic, phono, RCA Line A, digital S/P DIF Line B,
USB in (option)
2: Balanced XLR Mic, phono, RCA Line A, RCA Line B
3: Balanced XLR Mic, phono, RCA Line A, RCA Line B
4: Balanced XLR Mic, phono, RCA Line A, digital S/P DIF Line B,
USB in (option)
5: Separate balanced XLR Mic channel with gain,
triple tone control, talk-over, pan, PFL and FX insert
Phono Inputs
RCA Line Inputs
Balanced XLR Mic inputs
Digital S/P DIF Line inputs
USB inputs (option)
3 Master outputs with dual wet & dry FX-Assign
Master 1 (Main):
RCA and balanced XLR output with mono/stereo mode
Master 2 (Main):
Balanced XLR output with mono/stereo mode
Master 3 (Monitor): Balanced XLR output with mono/stereo mode,
Dual tone control (high & low), without DJ Mic
Record Outputs
2 RCA record outputs
2 S/P DIF digital record output
2 USB record output (option)
+ or – DJ Mic
Faders – Crossfader
All channel & cross faders are micro-processor controlled & easy replaceable by
removing the aluminium plate
Assignable Crossfader with curve adjust identical to our Rodec Scratchbox.
Headphones
2 Headphones outputs front (DJ) & rear (LJ) both can be used at the same time
World’s strongest DJ headphones amplifier
Headphones select rotary PFL/SUM
Illuminated PFL buttons
Alarm / music mute in /
Priority in with volume level rotary (option)
When emergency signal appears, all music will be muted
Alarm / music mute in can also be used as remote volume control
DJ Microphone keeps working during the activation of the music mute function
Priority RCA in can be used to transmit an alarm signal or recorded message
PRODUCTINFO
12
Although already being nicknamed “Little Brother” the MX1800 can be regarded as the
reference model of the new “Progressive” series. The visual lay out of this model bears
close resemblance to our MX180 Original, but internally this very much a “Progressive”
range mixer. With similar options like MX3000 such as USB input, and standard features
such as alarm mode and dual wet and dry FX-Assign this mixer will only look traditional at
first sight. As all other Progressive range models the MX1800 raises our sound quality to
the highest level of immaculate studio sound.
Identical philosophy as MX3000 with solid construction, high reliability, identical high
quality components, modular design and typical RODEC analogue sound make the
MX1800 the ideal choice for most club installation, festivals and events worldwide, as long
as a maximum of 18 inputs is not being surpassed.
Power supply
Internal universal switching power suply 90V <> 264V.
SPECIFICATIONS
110.0mm (4.3“)
Nominal analogue input levels:
Line A asymmetrical (RCA): 500mV / 50kW
Line B asymmetrical (RCA): 500mV / 50kW
Phono asymmetrical (RCA gold plated): 5.2mV / 50kW
Microphone (channel 1 – 4) symmetrical (XLR): 9.1mV / 3.6kW
Microphone symmetrical (XLR or 1/4” TRS JACK): 4.2mV / 1.8kW
Effects return (1/4” TRS JACK): 775mV / 10kW
Priority in (optional) (RCA): 500mV / 1.5kW
Nominal analogue output levels:
Master 1 asymmetrical (RCA): 775mV / 10kW
Master 1 symmetrical (XLR): 1.55V / 600W
Master 2 symmetrical (XLR): 1.55V / 600W
Monitor symmetrical (XLR): 1.55V / 600W
Record asymmetrical (RCA): 500mV / 10kW
Effects send asymmetrical (1/4” TRS JACK): 775mV / 10kW
Digital input:
Line B (RCA): S/P DIF IEC 958 type II 32kHz – 192kHz
USB (optional): 32kHz - 48kHz 16bit
Digital output:
Record (RCA): S/P DIF IEC 958 type II 44.1kHz
USB (optional): 11.025kHz - 48kHz 16bit
Music equalizer:
Low: +10dB / -21dB at 100Hz
Mid: +10dB / -21dB at 1kHz
High:
+10dB / -21dB at 10kHz
Microphone equalizer:
Low: +12dB / -12dB at 100Hz
Mid: +12dB / -12dB at 1kHz
High: +12dB / -12dB at 10kHz
Monitor output equalizer:
Low: +12dB / -12dB at 100Hz
High: +12dB / -12dB at 10kHz
General specifications:
Frequency response: +/- 0.25 dB from 20Hz to 20kHz
Subsonic filter: -25dB at 10Hz
Signal headroom: 20.0dB @ 1kHz / THD < 0.05%
Dynamic range: 103dB
Signal to noise ratio: 90dB
Total harmonic distortion: < 0.006%
Crosstalk left to right of an input channel: >60dB @ 1kHz
Crosstalk channel to channel: >86dB @ 1kHz
Power supply voltage: 90VAC – 264VAC
Power supply frequency: 47Hz – 63Hz
Power consumption: 42W (On), 69W (Full load), 6W (Stand by)
Operating temperature: 0°C (32°F) – 40°C (104°F)
Operating humidity: 5% - 90% (no condensation)
482.0mm (19.0”)
OPTIONS
USB I/O set
Optional USB input / output kit to connect the mixing panel to
a computer • The USB connector contains 1 stereo input signal
and 1 stereo record output signal. With this option music can
be played from a computer via USB • Simultaneous the mixed
music can be recorded via the computer
Order code: 94 001 0070
Alarm / music mute in / Priority in with volume level rotary
When emergency signal appears, all music will be muted •
Alarm / music mute in can also be used as remote volume control • DJ Microphone keeps working during the activation of the
music mute function • Priority RCA in can be used to transmit
an alarm signal or recorded message
Order code: 94 001 0071
355.0mm (14.0“) (8HE)
Headphones (1/4” TRS JACK):
8W (1kHz – 1%THD) 417mW (1.8V) / 1.1W music power
32W (1kHz – 1%THD) 1.0W (5.7V) / 1.7W music power
600W (1kHz – 1%THD) 520mW (17.7V) / 0.6W music power
442.0mm (17.4“)
343.0mm (13.5“)
Digital optical channel fader set
Users can upgrade their mixing panel with digital faders on the
music input channels. The digital faders replace the standard
analogue faders.
Order code: 94 001 0072
Digital optical crossfader set
The standard analogue crossfader can be upgraded by a digital
optical crossfader.
Order code: 94 001 0073
BLISTERED SPARE PARTS
Standard CROSS FADER
Order code: 94 001 0064
Standard mono CHANNEL FADER
Order code: 94 001 0078
Standard MIC CHANNEL FADER
Order code: 94 001 0079
Standard MASTER CHANNEL FADER
Order code: 94 001 0080
Standard ROTARY KNOBS SET
Order code: 94 001 0074
Standard FADER KNOBS SET
Order code: 94 001 0041
Frontpanel dimensions (W x D): 482.0mm (19.0”) x 355.0mm (14.0“) (8HE) • Bottombox
dim. (W x D x H): 442.0mm (17.4“) x 343.0mm (13.5“) x 110.0mm (4.3“) • Panel cut out
dimensions (W x D): 446.0mm (17.6“) x 347.0mm (13.7“) • Packed box dimensions (W x D
x H): 523.0mm (20.6“) x 414.0mm (16.3“) x 207.0mm (8.1“) • Weight: 6.62kg (14.59lbs)
• Packed weight: 7.88kg (17.37lbs)
13
FEATURES
4 Channel 10” Professional Audio Mixer
4 Multiple input channels with:
Gain
Triple tone control +10dB / - 21dB
Dual wet & dry FX-Assign (World’s First)
Balance
PFL (cue)
Channel
Channel
Channel
Channel
3
5
4
1
1
1: Balanced XLR Mic, phono, RCA Line A, digital S/P DIF Line B, USB in (option)
2: Balanced XLR Mic, phono, RCA Line A, RCA Line B
3: Balanced XLR Mic, phono, RCA Line A, RCA Line B
4: Separate balanced XLR Mic channel with gain,
triple tone control, talk-over, pan, PFL and FX insert
Phono Inputs
RCA Line Inputs
Balanced XLR Mic inputs
Digital S/P DIF Line inputs
USB inputs (option)
2 Master outputs with dual wet & dry FX-Assign
Master 1 (Main):
RCA and balanced XLR output with mono/stereo mode
Master 2 (Monitor): Balanced XLR output with mono/stereo mode,
Dual tone control (high & low), without DJ Mic
Record Outputs
2 RCA record outputs
1 S/P DIF digital record output
1 USB record output (option)
+ or – DJ Mic
Faders – Crossfader
All channel & cross fader-functions are micro-processor controlled All faders
are easy replaceable by removing the aluminium plate
Assignable Crossfader with curve adjust identical to our Rodec Scratchbox.
Headphones
2 Headphones outputs front (DJ) & rear (LJ) both can be used at the same
time
World’s strongest DJ headphones amplifier
Headphones select rotary PFL/SUM • Illuminated PFL buttons.
Power supply
Internal universal switching power supply 90V <> 264V.
PRODUCTINFO
14
The MX1400 is the real compact model of the new Rodec “Progressive” series. With a similar approach as for the MX2200 but even
more compact, the MX1400 can still handle 12 standard source input channels with a separate microphone channel. With the same
double effects arrangement and optional digital inputs as our other
“Progressive” mixers we developed a real professional 10” audio
mixer
As all other Rodec progressive range models the MX1400 raises
our sound quality to the highest level of immaculate studio sound.
The core philosophy of solid construction, reliability, high quality
components, modular design and the unique Rodec analogue sound
all feature in the MX1400.
The Rodec brand stands for the highest quality in audio today, designed and manufactured in Belgium, Europe.
For real compact or mobile set-ups where sound quality, connectivity, performance and creativity are requested the MX1400 will
be the ideal choice for any professional world wide to achieve his
goals..
SPECIFICATIONS
Nominal analogue input levels:
110.0mm (4.3“)
Line A asymmetrical (RCA): 500mV / 50kW
Line B asymmetrical (RCA): 500mV / 50kW
Phono asymmetrical (RCA gold plated): 5.2mV / 50kW
Microphone (channel 1 – 3) symmetrical (XLR): 9.1mV / 3.6kW
Microphone symmetrical (XLR or 1/4” TRS JACK): 4.2mV / 1.8kW
Effects return (1/4” TRS JACK): 775mV / 10kW
Nominal analogue output levels:
Master 1 asymmetrical (RCA): 775mV / 10kW
Master 1 symmetrical (XLR): 1.55V / 600W
Monitor symmetrical (XLR): 1.55V / 600W
Record asymmetrical (RCA): 500mV / 10kW
Effects send asymmetrical (1/4” TRS JACK): 775mV / 10kW
Headphones (1/4” TRS JACK):
8W (1kHz – 1%THD) 417mW (1.8V) / 1.1W music power
32W (1kHz – 1%THD) 1.0W (5.7V) / 1.7W music power
600W (1kHz – 1%THD) 520mW (17.7V) / 0.6W music power
343.0mm (13.5“)
246.0mm (9.7“)
254.0mm (10.0”)
Digital input:
Line B (RCA): S/P DIF IEC 958 type II 32kHz – 192kHz
USB (optional): 32kHz - 48kHz 16bit
Music equalizer:
Low: +10dB / -21dB at 100Hz
Mid: +10dB / -21dB at 1kHz
High: +10dB / -21dB at 10kHz
Microphone equalizer:
Low: +12dB / -12dB at 100Hz
Mid: +12dB / -12dB at 1kHz
High: +12dB / -12dB at 10kHz
Monitor output equalizer:
Low: +12dB / -12dB at 100Hz
High: +12dB / -12dB at 10kHz
General specifications:
Frequency response: +/- 0.25 dB from 20Hz to 20kHz
Subsonic filter: -25dB at 10Hz
Signal headroom: 20.0dB @ 1kHz / THD < 0.05%
Dynamic range: 103dB
Signal to noise ratio: 90dB
Total harmonic distortion: < 0.006%
Crosstalk left to right of an input channel: >60dB @ 1kHz
Crosstalk channel to channel: >86dB @ 1kHz
Power supply voltage: 90VAC – 264VAC
Power supply frequency: 47Hz – 63Hz
Power consumption: 38W (On), 60W (Full load), 6W (Stand by)
Operating temperature: 0°C (32°F) – 40°C (104°F)
Operating humidity: 5% - 90% (no condensation)
OPTIONS
USB I/O set
Optional USB input / output kit to connect the mixing panel to a computer • The USB connector contains 1 stereo input signal and 1 stereo
record output signal • With this option music can be played from a
computer via USB • Simultaneous the mixed music can be recorded
via the computer
Order code: 94 001 0070
Digital optical channel fader set
Users can upgrade their mixing panel with digital faders on the music
input channels • The digital faders replace the standard analogue faders
Order code: 94 001 0072
Digital optical crossfader set
The standard analogue crossfader can be upgraded by a digital optical
crossfader
Order code: 94 001 0073
355.0mm (14.0“) (8HE)
Digital output:
Record (RCA): S/P DIF IEC 958 type II 44.1kHz
USB (optional): 11.025kHz - 48kHz 16bit
BLISTERED SPARE PARTS
Standard CROSS FADER
Order code: 94 001 0064
Standard mono CHANNEL FADER
Order code: 94 001 0078
Standard MIC CHANNEL FADER
Order code: 94 001 0079
15
Standard MASTER CHANNEL FADER
Order code: 94 001 0080
Standard rotary knobs set
Order code: 94 001 0074
Standard fader knobs set
Order code: 94 001 0041
Frontpanel dimensions (W x D): 254.0 mm (10.0”) x 355.0 mm (14.0“) (8HE) • Bottombox
dim. (W x D x H): 246.0 mm (9.7“) x 343.0 mm (13.5“) x 110.0 mm (4.3“) • Panel cut out
dimensions (W x D): 250.0mm (9.8“) x 347.0 mm (13.7“) • Packed box dimensions (W x D
x H): 335.0mm (13.2“) x 414.0mm (16.3“) x 207.0mm (8.1“) • Weight: 4.50kg (9.92lbs) •
Packed weight: 5.46kg (12.04lbs)
16
17
PRODUCTINFO
The origin of the RODEC MX180 Original goes back as far as 1986,
when the introduction of the MX-18 set a standard for many years
to come for numerous professional users all over the world.
With 18 inputs, 2 master outputs, multiple rec outputs, triple tone
control, PFL, talk-over & a construction quality, sound performance
and reliability that most manufacturers could only dream of the
MX-18 was an instant success in most major markets in Europe,
Asia and Canada.
True to the Hifi roots of the brand this mixer used first class components, modular set-up and rigid construction to make sure that
this mixer could withstand the most fierce conditions in which a
professional unit can in many cases be used.
Although the basic lay-out and construction manner have not visibly
changed over the years, the 2009 MX180 Original is in fact a fifth
generation MX180, which in no way resembles the original design
as far as electronics are concerned.
Of course the product is still being manufactured entirely in Belgium,
and of course we still use first class components with faders still
being fixed individually to the front plate of the mixer, but of course
technology has also evolved dramatically over the last 25 years.
So with the basic philosophy of construction quality, reliability and
sound performance in mind we now introduced the MX180 Original,
as the current climax of our analogue developments.
Sound performance remains ‘analogue’ with dynamics, detail and
ambiance at a level which we have not been able to achieve before, and a signal to noise ratio which can be compared to many
Hifi or High End products, which come nowhere near the complexity
demanded from a mixer with such complete features.
With still 18 inputs, double symmetrical master outputs, multiple
record outputs, effects loop and separate microphone channel the
MX180 Original will remain the flagship for all analogue RODEC
lovers for many years to come.
18
Appreciated for their serviceability and modular set-up this mixer
is also very much appreciated by any technician, who will in most
case be able to service a unit on-the spot, which makes it very attractive for night club owners and users alike.
In a nutshell, the RODEC MX180 Original offer more than 55 years
of High-End research, design and development to any professional
user and lover of analogue music. It has been a reference product
for many years, and although a new ‘progressive’ range has meanwhile been introduced it will remain this reference for many years
to come in the pure analogue field.
FEATURES
5 Channel 19” 7HE Professional Audio Mixer
4 Multiple input channels with:
Gain
Triple tone control
Balance
PFL select pushbutton with LED-indicator (cue)
Channel
Channel
Channel
Channel
Channel
1:
2:
3:
4:
5:
Line A, Line B, Balanced XLR Mic, phono
Line A, Line B, Balanced XLR Mic, phono
Line A, Line B, Balanced XLR Mic, phono
Line A, Line B, Balanced XLR Mic, phono
Separate balanced XLR Mic channel with gain,
triple tone control, talk-over, pan, PFL and FX insert
4 Phono Inputs
8 RCA Line Inputs
5 Balanced XLR Mic inputs
3 Master outputs
Master 1 (Main):
RCA and balanced XLR output with mono / stereo mode
Master 2 (Main):
RCA and balanced XLR output with mono / stereo mode
Master 3 (Monitor): RCA output with mono/stereo mode, without DJ Mic
Record outputs
4 RCA record outputs
These record outputs can also be used as AUX output.
Music effects insert
Music effects insert connectors (JACK) to connect external effect
units.
Faders – Crossfader
Easy-slide 60mm channel faders
Crossfader between channels 1-2 and 3-4
Soft touch fader knobs for better grip.
Headphones
Headphones can be connected on the front or rear of the mixer
Very strong DJ headphones amplifier
Headphones select rotary PFL / SUM.
Power supply
Internal universal switching power suply 90V <> 264V.
SPECIFICATIONS
151.0mm (5.9“)
Nominal analogue input levels:
Line A asymmetrical (RCA): 500mV / 50kW
Line B asymmetrical (RCA): 500mV / 50kW
Phono asymmetrical (RCA gold plated): 5.2mV / 50kW
Microphone (channel 1 – 4) symmetrical (XLR): 9.1mV / 3.6kW
Microphone symmetrical (XLR or 1/4” TRS JACK): 4.2mV / 1.8kW
Effects return (1/4” TRS JACK): 775mV / 10kW
Nominal analogue output levels:
Master 1 asymmetrical (RCA): 775mV / 10kW
Master 1 symmetrical (XLR): 1.55V / 600W
Master 2 asymmetrical (RCA): 775mV / 10kW
Master 2 symmetrical (XLR): 1.55V / 600W
Monitor asymmetrical (RCA): 775mV / 10kW
Record asymmetrical (RCA): 500mV / 10kW
Effects send asymmetrical (1/4” TRS JACK): 775mV / 10kW
294.0mm (11.6”)
442.0mm (17.4“)
Headphones (1/4” TRS JACK):
8W (1kHz – 1%THD) 22mW (420mV) / 22mW music power
32W (1kHz – 1%THD) 65mW (1.4V) / 65mW music power
600W (1kHz – 1%THD) 91mW (7.4V) / 91mW music power
482.0mm (19.0”)
Music equalizer:
Low: +12dB / -12dB at 100Hz
Mid: +12dB / -12dB at 1kHz
High: +12dB / -12dB at 10kHz
310.0mm (12.2“) (7HE)
Microphone equalizer:
Low: +12dB / -12dB at 100Hz
Mid: +12dB / -12dB at 1kHz
High: +12dB / -12dB at 10kHz
General specifications:
Frequency response: +/- 0.40dB from 20Hz to 20kHz
Subsonic filter: -25dB at 10Hz
Signal headroom: 20.0dB @ 1kHz / THD < 0.015%
Dynamic range: 110dB
Signal to noise ratio: 90dB
Total harmonic distortion: < 0.006%
Crosstalk left to right of an input channel: >48dB @ 1kHz
Crosstalk channel to channel >96dB @ 1kHz
Power supply voltage: 90VAC – 264VAC
Power supply frequency: 47Hz – 63Hz
Power consumption: 40W (On), 45W (Full load),
5W (Stand by)
Operating temperature: 0°C (32°F) – 40°C (104°F)
Operating humidity: 5% - 90% (no condensation)
OPTIONS
Standard CROSS FADER
Replacement Cross fader for all models since 1986 & Original
Series
Order code: 94 001 0069
Standard CHANNEL FADER
Stereo Channel replacement fader for all models since
1986 & Original Series (Mic Channel for Progressive series
MX-1400 1800 2200 & 3000)
Order code: 94 001 0079
Standard MASTER CHANNEL FADER
Stereo Master replacement fader for all models since 1986
& Original Series (Also Master fader for Progressive series
MX-1400 1800 2200 & 3000)
Order code: 94 001 0080
Standard ROTARY KNOBS SET
Order code: 94 001 0040
Standard FADER KNOBS SET
Order code: 94 001 0041
Frontpanel dimensions (W x D): 482.0mm (19.0”) x 310.0mm (12.2“) (7HE) •
Bottombox dim. (W x D x H): 442.0mm (17.4“) x 294.0mm (11.6“) x 151.0mm (5.9“)
• Panel cut out dimensions (W x D): 446.0mm (17.6“) x 298.0mm (11.7“) • Packed
box dimensions (W x D x H): 560.0mm (22.0“) x 384.0mm (15.1“) x 254.0mm (10.0“)
• Weight: 6.22kg (13.71lbs) • Packed weight: 7.62kg (16.79lbs)
19
PRODUCTINFO
The RODEC BX-14 was introduced back in 2002 as a 19 inch solution
for smaller bars and clubs. This specific market was in need of professional high quality audio mixing solutions, where the average user
as well as the professional DJ would be allowed to musically optimize
their audio system.
With 12 inputs, 2 master outputs, multiple rec outputs, triple tone
control, PFL & the typical RODEC construction quality, sound performance and reliability these mixers have meanwhile gained their reputation as the small MX-180 and have found their way into thousands
of venues around the world.
The BX series are built up in the same manner as all our 19 inch
mixers, with identical first class hifi components, modular set-up and
rigid construction to make sure that this mixer could withstand the
most fierce conditions in which a professional unit can in many cases
be used.
With strong resemblance to the original MX-180 which was introduced back in 1986, the BX14 Original is in fact a third generation
product, with obvious updates as standard symmetrical outputs,
larger Led bars and new Lay Out.
Less obvious changes are on pure electronic level with a design which
is true to the original set-up but with updated schematics and components.
As with all RODEC professional mixers BX Original series is still being manufactured entirely in Belgium, with first class components
and faders and all other mechanically stress sensible components
being fixed individually to the front plate of the mixer in true RODEC
tradition.
Sound performance remains ‘analogue’ with dynamics, detail and
ambiance at a level which can be compared to our current MX180
original, which has a signal to noise ratio that can be compared to
many Hifi or High End Audio products that do not offer the complexity
of signal processing of our mixers.
With still 12 input channels and 2 microphone inputs the BX Original series will offer adequate connectivity to many professional users
who prefer quality, reliability and performance over entanglement,
feature overload or short term approach.
Appreciated for their serviceability and modular set-up this mixer is
also very much appreciated by any technician, who will in most cases
be able to service a unit on-the spot, which makes it very attractive
for night club owners and users alike. This will also make our RODEC
mixers one of the greenest products available, with an average life
span of over 10 years for all our mixers and a manufacturing facility
which respects the environment and all people involved in the production process. All used components and material are recyclable,
including the packaging.
20
In a nutshell, the RODEC BX series offer more than 55 years of HighEnd research, design and development to any professional user and
lover of analogue music. It has been a reference products for many
years, and although a new ‘progressive’ range has meanwhile been
introduced it will remain this reference for many years to come in the
pure analogue field.
OPTIONS
120.0mm
Standard CROSS FADER
Replacement Cross fader for all models since 1986 & Original
Series
Order code: 94 001 0069
254.0mm
Standard CHANNEL FADER
Stereo Channel replacement fader for all models since 1986
& Original Series (Mic Channel for Progressive series MX-1400
1800 2200 & 3000)
Order code: 94 001 0079
444.0mm
482.0mm
Standard MASTER CHANNEL FADER
Stereo Master replacement fader for all models since 1986 &
Original Series (Also Master fader for Progressive series MX1400 1800 2200 & 3000)
Order code: 94 001 0080
Standard ROTARY KNOBS SET
Order code: 94 001 0040
Front: 482.0mm x 266.0mm (19” x 6HE)
Chassis: 444.0mm x 254.0mm x 120.0mm
Weight: 6.02kg
266.0 mm (19” x 6HE)
Standard FADER KNOBS SET
Order code: 94 001 0041
FEATURES
6 Channel 19” 6HE Professional Audio Mixer
6 Multiple input channels with:
Gain
Triple tone control
PFL select pushbutton with LED-indicator (cue)
Channel
Channel
Channel
Channel
Channel
Channel
Nominal analogue output levels:
Master 1 asymmetrical (RCA): 1.55V / 10W
Master 1 symmetrical (XLR): 3.3V / 600W
Master 2 asymmetrical (RCA): 1.55V / 10W
Record asymmetrical (RCA): 500mV / 10kW
AUX asymmetrical (RCA): 775mV / 10kW
Headphones (1/4” TRS JACK) sensitivity 12V/600W
Line,
Line,
Line,
Line,
Line,
Line,
Line B
Phono
Phono
Line B
Balanced XLR Mic with EFX insert
Balanced XLR Mic with EFX insert
2 Phono Inputs
8 RCA Line Inputs
2 Balanced XLR Mic inputs
SPECIFICATIONS
Nominal analogue input levels:
Line A asymmetrical (RCA): 220mV / 50kW
Line B asymmetrical (RCA): 220mV / 50kW
Phono asymmetrical (RCA gold plated): 2.3mV / 50kW
Microphone (channel 5 & 6) symmetrical (XLR): 3.5mV / 3.3kW
1:
2:
3:
4:
5:
6:
Music equalizer:
Low: +13dB / -13dB at 100Hz
Mid: +13dB / -13dB at 1kHz
High:
+13dB / -13dB at 10kHz
General specifications:
Subsonic filter: -25dB @ 10Hz
Total harmonic distortion: < 0.01%
Signal to noise ratio: 90dB
Fuse: T500mA
Approbation: CE-approved
Power source:
Standard: 230V / 50Hz-60Hz
On request: 100V-117V / 50Hz-60Hz
Power consumption: OFF=2.0VA ON=23.4VA
2 Master outputs with general
balance rotary
Master 1 (Main): RCA and balanced XLR output
Master 2 (Main): RCA
Record outputs
2 RCA record outputs
1 RCA AUX output
Faders – Crossfader
Easy-slide 60mm channel faders
Crossfader between channels 1-2 and 3-4
Soft touch fader knobs for better grip.
Headphones
Very strong DJ headphones amplifier
Headphones select rotary PFL/SUM
21
PRODUCTINFO
The RODEC BX-9 was introduced back in 2002 as a 19 inch solution for
smaller bars and clubs.
This specific market was in need of professional high quality audio mixing
solutions, where the average user as well as the professional DJ would be
allowed to musically optimize their audio system.
22
With 8 inputs, 2 master outputs, multiple rec outputs, triple tone control, PFL
& the typical RODEC construction quality, sound performance and reliability
these mixers have meanwhile gained their reputation as the small MX-180
and have found their way into thousands of venues around the world. The
BX series are built up in the same manner as all our 19 inch mixers, with
identical first class hifi components, modular set-up and rigid construction to
make sure that this mixer could withstand the most fierce conditions in which
a professional unit can in many cases be used.
With strong resemblance to the original MX-180 which was introduced back
in 1986, the BX9 Original is in fact a third generation product, with obvious
updates as standard symmetrical outputs, larger Led bars and new Lay Out.
Less obvious changes are on pure electronic level with a design which is true
to the original set-up but with updated schematics and components.
As with all RODEC professional mixers BX Original series is still being manufactured entirely in Belgium, with first class components and, in true RODEC
tradition, faders and all other mechanically stress sensible components being
fixed individually to the front plate of the mixer. Sound performance remains
‘analogue’ with dynamics, detail and ambiance at a level which can be compared
to many Hifi or High End Audio products that do not offer the complexity of
signal processing of our mixers.With still 8 input channels and 1 microphone
inputs the BX Original series will offer adequate connectivity to many professional
users who prefer quality, reliability and performance over entanglement, feature
overload or short term approach.
Known for their serviceability and modular set-up this mixer is also very
much appreciated by any technician, who will in most cases be able to service
a unit on-the spot, which makes it very attractive for night club owners and
users alike. This will also make our RODEC mixers one of the greenest products
available, with an average life span of over 10 years for all our mixers
and a manufacturing facility which respects the environment and all
people involved in the production process. All used components and
material are recyclable, including the packaging.
In a nutshell, the RODEC BX series offer more than 55 years of HighEnd research, design and development to any professional user and
lover of analogue music. It has been a reference products for many
years, and although a new ‘progressive’ range has meanwhile been
introduced it will remain this reference for many years to come in the
pure analogue field.
120.0mm
482.0mm
254.0mm
SPECIFICATIONS
266.0mm (19” x 6HE)
Nominal analogue input levels:
Line A asymmetrical (RCA): 220mV / 50kW
Line B asymmetrical (RCA): 220mV / 50kW
Phono asymmetrical (RCA gold plated): 2.3mV / 50kW
Microphone (channel 5 - 6) symmetrical (XLR): 3.5mV / 3.3kW
Nominal analogue output levels:
Master 1 asymmetrical (RCA): 1.55V / 10W
Master 1 symmetrical (XLR): 3.3V / 600W
Master 2 asymmetrical (RCA): 1.55V / 10W
Record asymmetrical (RCA): 500mV / 10kW
AUX asymmetrical (RCA): 775mV / 10kW
Headphones (1/4” TRS JACK) sensitivity 12V/600W
Music equalizer:
Low: +13dB / -13dB at 100Hz
Mid: +13dB / -13dB at 1kHz
High: +13dB / -13dB at 10kHz
General specifications:
Subsonic filter: -25dB @ 10Hz
Total harmonic distortion: < 0.01%
Signal to noise ratio: 90dB
Fuse: T500mA
Approbation: CE-approved
Front: 482.0mm x 266.0mm (19” x 6HE) • Chassis: 444.0mm x 254.0mm x 120.0mm • Weight: 5.72kg
Power source:
Standard: 230V / 50Hz-60Hz
On request: 100V-117V / 50Hz-60Hz
Power consumption: OFF=2.0VA ON=21.2VA
FEATURES
4 Channel 19” 6HE Professional Audio Mixer
4 Multiple input channels with:
Gain
Triple tone control
PFL select pushbutton with LED-indicator (cue)
Channel
Channel
Channel
Channel
1:
2:
3:
4:
Line,
Line,
Line,
Line,
Line B
Phono
Phono
Balanced XLR Mic with EFX insert
2 Phono Inputs
5 RCA Line Inputs
1 Balanced XLR Mic inputs
OPTIONS
Standard CROSS FADER
Replacement Cross fader for all models since 1986 & Original Series
Order code: 94 001 0069
2 Master outputs with general balance rotary
Master 1 (Main): RCA and balanced XLR output
Master 2 (Main): RCA
Record outputs
2 RCA record outputs
1 RCA AUX output.
Faders – Crossfader
Easy-slide 60mm channel faders
Crossfader between channels 2 and 3
Soft touch fader knobs for better grip
Headphones
Very strong DJ headphones amplifier
Headphones select rotary PFL/SUM
Standard CHANNEL FADER
Stereo Channel replacement fader for all models since 1986 & Original
Series (Mic Channel for Progressive series MX-1400 1800 2200 & 3000)
Order code: 94 001 0079
Standard MASTER CHANNEL FADER
Stereo Master replacement fader for all models since 1986 & Original
Series (Also Master fader for Progressive series MX-1400 1800 2200 &
3000)
Order code: 94 001 0080
Standard ROTARY KNOBS SET
Order code: 94 001 0040
Standard FADER KNOBS SET
Order code: 94 001 0041
23
PRODUCTINFO
24
And then we got the idea to create the ultimate scratch mixer...
A team of professional Scratch Deejays and our R&D department tested every available scratch mixer on
the market. Our goal was to improve every available feature and used component. To live up to the RODEC
reputation this mixer needed the RODEC Quality, Sound, Headroom and Equalizer. Our Dj team provided
the necessary refreshing new features. After more than 2 years of development the result is “the RODEC
Scratchbox” in our opinion the ultimate scratch mixer without unnecessary bells & whistles. Check it out...
For the complete Scratchbox story check our special product website:
http://www.scratchbox.eu
Special thanks to: Lamont & Grazzhoppa (Belgium)
Pro-Zeiko (Germany) / Dj Mastafingaz (Belgium) / 2 Tall (UK) / Dj Falcon (Poland) / Dj Bordallo (Spain)
Dj Jack (Belgium) / Dj Piatas (Poland) / Jerboa (Belgium) / Dj Getdown (France) / Realson (Germany)
Dj Trakmajster (Poland) / Dj Crossfingaz (Belgium) / DJ Eprom (Poland) / DJ Krime (Poland)
Gizmo & Deft at Skratchworx (UK)
http://www.skratchworx.com/reviews/scratchbox.php
SPECIFICATIONS
4 Channel 10” 9HE Professional Scratch Mixer
Nominal analogue input levels:
Line asymmetrical (RCA): 500mV / 50kW
Phono asymmetrical (RCA gold plated): 5.2mV / 50kW
Microphone assymmetrical: 8.0mV / 1.2kW
Microphone symmetrical (XLR): 8.0mV / 22kW
Effects return (1/4” TRS JACK): 775mV / 10kW
Channels 1 and 2
Phono / line input select switch • Channel 1-2 reverse switch • Rotative level control per channel • Triple tone control with short faders, for
very fast manipulation of the audio spectrum (+10dB/-21dB) • Aux /
FX-send push button for routing the signal via external effects-units •
Wet / dry fader to mix between signal without effect and signal with
effect • Short balance fader • CUT switches with very low operating
force, placeable in 8 directions • CUT switchesCan be used in 3 modes:
Momentary / Latching / Double speed cut • Easy slide 45mm fader specially designed for high speed operating • Channel fader reverse switch
with LED indication at the front • Channel fader curve control with potentiometer at front • Easy slide digital optical long life crossfader •
Crossfader with friction control screw and cut-in distance control screws
• Crossfader reverse switch with LED indication at the front • Crossfader
curve control with potentiometer at front • PFL channel 1 and 2 ON/OFF
button • PFL select fader, to create a mixed signal of channel 1 and 2
in the headphones • All volume- and curve-controls on channel 1 and
2 are done by a microcontroller controlled VCA • The channel-faders,
cross-fader and cut-switches can easily be replaced via the top-panel
after lifting of the scratchplate.
Channel 3
Mic / line input select switch • Rotative level control • 0dB LED to adjust
the level • Dual band equalizer with rotative potmeters • PFL ON/OFF
button • Routing switch to route the signal to channel 1 or 2 or directly
to the mix • Short channel fader for fast operation.
Nominal analogue output levels:
Master 1 asymmetrical (RCA): 775mV / 10kW
Master 1 symmetrical (XLR): 1.55V / 600W
Master 2 asymmetrical (RCA): 775mV / 10kW
AUX asymmetrical (RCA): 775mV / 10kW
Record asymmetrical (RCA): 775mV / 10kW
Session asymmetrical (RCA): 775mV / 10kW
Effects send asymmetrical (1/4” TRS JACK): 775mV / 10kW
Headphones 7.7V / 600W input sensitivity
Music equalizer channel 1 & 2:
Low: +10dB / -21dB at 100Hz
Mid: +10dB / -21dB at 1kHz
High: +10dB / -21dB at 10kHz
Music equalizer channel 3:
Low: +13dB / -13dB at 100Hz
High: +13dB / -13dB at 10kHz
General specifications:
Subsonic filter: -25dB @ 10Hz
Total harmonic distortion: < 0.02%
Signal to noise ratio: 90dB
Fuse: T500mA
Approbation: CE-approved
Power source:
Standard with an AC-adapter of: 230V / 50Hz-60Hz
On request: 100V-117V / 50Hz-60Hz
Power consumption: OFF=8,7VA ON=22VA
398.0mm
Outputs
2 Master outputs on RCA connectors
1 Symmetrical output with XLR connectors on master 1
1 Aux / FX-send output on RCA connectors
1 Record/aus/session output on RCA connectors
1 Strong head-phones output on JACK (6,35mm - 1/4 inch) and miniJACK (3,2mm - 1/8 inch).
400.0mm (10” x 9HE)
4 Input channels
2 Phono inputs on gold plated RCA connectors
4 Line inputs CH1 + CH2 + CH3 / FX-return + CH4 / Session / Backtape-in
1 Microphone input on COMBO (XLR-JACK) connector
254.0mm (10,0”)
84.0mm
FEATURES
Channel 4
Rotative level control
Features
Front- and top panel in elegant matt silver paint • Aluminium anodised
smooth scratchplate, no obstructions by any paint of text print on the
panel • Front-handles to carry the mixer and to avoid unwanted moving
of the buttons during use and during connection • Same height as the
Technics famous SL-1200/1210 turntables • Soft touch rotative knobs
for better grip on all rotative potmetersVery smooth, extremely strong,
metal plated matt chrome coloured knobs on all faders • Mode switch
to select mono or stereo operation of the mixing panel, ideal for records
with different left and right tracks • Two master outputs with rotative
volume control (also useable as monitor or booth output) • Two bright
VU-meters to show the levels of the inputs or mixed signal • Normal
and upside down text print at the back panel to facilitate connection •
Soft rubber anti-slide buttons at the bottom of the mixer • Power switch
on the back of the panel, to avoid accidentally switching off the panel •
External power supply, to reduce disturbances.
OPTIONS
Analog fader set for Scratchbox fader
Order code: 94 001 0064
Digital optical fader set for Scratchbox
Order code: 94 001 0063
Standard knobs set for Scratchbox
Replacement knobs for all potentiometers, eq-faders,
balance faders and the wet / dry fader of the Scratchbox
Order code: 94 001 0065
Fader knobs set for Scratchbox
Replacement knobs for all potentiometers, eq-faders,
balance faders and the wet / dry fader of the Scratchbox
Order code: 94 001 0066
Scratchbox backpack
Specially designed padded backpack to transport your
scratchbox to gigs. Has a special compartment for the
power supply and a compartment for headphones, spare
needles, etc.
Order code: SBP-01
25
224.0mm
Front: 254.0mm x 400.0mm (10” x 9HE) • Chassis: 224.0mm x 398.0mm x 84.0mm (same
height as Technics SL-1210 MKII) • Weight: 6.02kg
PRODUCTINFO
26
The Rodec / Sherman "Restyler" is the result of great cooperation between two high-end
analogue Belgian manufacturers! This unique masterpiece is no regular effects unit or filter
bank ... it's a one of a kind "RESTYLER".
The Restyler redefines the dynamics, punch, groove and sound of your music, instrument
or musical production. It can be used by deejays, musicians, producers, remixers & musical freaks worldwide.
115.0mm (4.53“)
222.0mm (8.74”)
172.0mm (6.77”)
SPECIFICATIONS
Nominal analogue input levels:
Asymmetrical (RCA): 50mV to 10V / 100kW
Symmetrical (JACK): 50mV to 10V / 200kW
Symmetrical (XLR): 50mV to 10V / 200kW
General specifications:
Frequency range master and slave frequency potentiometers: 15Hz – 39kHz
Maximum resonance / oscillation level: +15dBm (on asymm. outputs) +21dBm (on symm. outputs)
Crosstalk left to right: >47dB @ 1kHz
Frequency response: +/- 0.50dB from 20Hz to 20kHz
177.0mm (4HE)
Nominal analogue output levels:
Asymmetrical (RCA): 0V to 3.3V/ 150W
Symmetrical (JACK): 0V to 6.6V / 300W
Symmetrical (XLR optional): 0V to 6.6V / 600W
Power supply voltage: 230VAC
Power supply frequency: 50Hz
Power consumption: 18.5W
Operating temperature: 0°C (32°F) – 40°C (104°F)
Operating humidity: 5% - 90% (no condensation)
27
Dimensions (W x D x H): 222.0mm (8.74”) x 172.0mm (6.77“) x 115.0mm (4.53“) • Packed box dimensions
(W x D x H): 250.0mm (9.84“) x 250.0mm (9.84“) x 217.0mm (8.54“) • Weight (without transfo): 1.90kg (4.19lbs)
• Weight (with transfo): 2.60kg (5.73lbs) • Packed weight: 3.10kg (6.83lbs)
PRODUCTINFO
28
The RODEC Patch Live eliminates all problems you encounter while connecting your computer based DJ
system to the fixed club or bar installation.
It can also be used in a private or rental DJ set. It’s a professional solution in a black robust enclosure with
clear bright printing.
This patch panel will allow you to connect all your cabling & switch between two digital Dj’s in a few seconds!
The basic installation cabling is hidden and protected to avoid misuse.
The included mounting lips allow you to mount the unit in the best possible position (Tabletop, 19” or 12,6”).
The Patch Live panel is supplied with the necessary additional RCA cables.
90.0mm
Front Panel (hidden)
Makes the connection to the mixer.
2 Phono or Line inputs to connect the left and right turntables
or cd players.
2 Phono or Line outputs (THRU) to connect the left and right
turntables or cd players to the DJ mixer.
2 Line outputs to connect the left and right player of the soundcard interface to the DJ mixer.
1 Aux line input or output
350.0mm or 482.0mm (19”)
Aux Input
If connected to the record output of the DJ mixer it can used for
external recording devices
e.g. Solid state recorders, MD/DAT recorders
132.0mm (3HE)
Aux Output
If connected to a channel input of the DJ mixer it can used for
other external sources
e.g. MP3 players, live act mixes etc.
Top Panel
Has all the patch connections for the Digital sources.
Has connections for 2 digital sources, with mute switching for
each source.
Aux input or output can be used as additional line level input or
record output.
29
310.0mm
ACCESSOIRES
Rodec DJ Vinyl Cleaner
200 ml Anti-static record cleaner
Order code: DVC-01
Rodec DJ Needle Cleaner
20 ml Fluid for cleaning cartridge stylus
Order code: DNC-01
Rodec DJ Vinyl Brush
Anti dust & dirt brush for vinyl records
Order code: DVB-01
Rodec DJ SlipMats 01
2 Rodec labelled high quality slipmats
Order code: DSM-01
Rodec DJ SlipMats 02
2 Rodec labelled high quality slipmats
Order code: DSM-02
Rodec DJ SlipMats 03
2 Rodec labelled high quality slipmats
Order code: DSM-03
Rodec DJ Needle Cleaner
Order code: DNC-01
Rodec DJ SlipMats 04
2 Rodec labelled high quality slipmats
Order code: DSM-04
Rodec DJ SlipMats 05
2 Rodec labelled high quality slipmats
Order code: DSM-05
Rodec DJ SlipMats 01
Order code: DSM-01
30
Rodec DJ Vinyl Brush
Order code: DVB-01
Rodec DJ Vinyl Cleaner
Order code: DVC-01
Rodec DJ SlipMats 05
Order code: DSM-05
Rodec DJ SlipMats 02
Order code: DSM-02
Rodec DJ SlipMats 04
Order code: DSM-04
31
Rodec DJ SlipMats 03
Order code: DSM-03
DJ APPAREL
Rodec DJ Tee-Shirt 11
Color: Black / White
Text “Last night I saved your life”
Size: S - M - L - XL
Order code: DTS-11
Rodec DJ Tee-Shirt 12
Color: Black / White
Text: “I don’t do requests”
Size: S - M - L - XL
Order code: DTS-12
Rodec DJ Tee-Shirt 13
Color: Black / Toxic Green
Text: “Last night I saved your life”
Size: S - M - L - XL
Order code: DTS-13
Rodec DJ Tee-Shirt 14
Color: Black / White
Text: “Do I look like a Juke-Box”
Size: S - M - L - XL
Order code: DTS-14
Rodec DJ Tee-Shirt 15
Color: Army Green / White
Text: “Do I look like a Juke-Box”
Size: S - M - L - XL
Order code: DTS-15
Rodec DJ Tee-Shirt 16
Color: Black / White
Text: “Superstar DJ”
Size: S - M - L - XL
Order code: DTS-16
Rodec DJ Tee-shirt 11
Order code: DTS-11
Rodec DJ Tee-shirt 13
Order code: DTS-13
Rodec DJ Tee-Shirt 17
Color: Army Green / White
Text: “Superstar DJ”
Size: S - M - L - XL
Order code: DTS-17
Rodec DJ Tee-shirt 12
Order code: DTS-12
32
Rodec DJ Tee-shirt 14
Order code: DTS-14
Rodec DJ Tee-shirt 16
Order code: DTS-16
Rodec DJ Tee-shirt 15
Order code: DTS-15
Rodec DJ Tee-shirt 17
Order code: DTS-17
33
34
35
Transtel Sabima Ltd.
Duboisstraat 50
2060 Antwerpen
Belgium
phone: +32 (0)3 237 36 07
fax: +32 (0)3 216 97 62
info@rodec.be
www.rodec.be
AUTHORISED DEALER
36