Universal Remote Control URC-200 Owner`s manual

Owner’s
Manual
Thank You!
Thank you for purchasing the Automator™
URC-200 Pre-Programmed and Learning Remote
Control. The Quick Setup DVD tutorial supplied
with the Automator demonstrates the process of
setting up and automating a home entertainment
system. Watch the DVD first to familiarize yourself with the capabilities of the Automator and
the setup process. This manual is designed to
assist you step-by-step as you setup the
Automator to replace all of your remote controls
and automate your home entertainment system.
URC-200 Owner’s Manual © 2004 Universal Remote Control, Inc.
The information in this manual is copyright protected. No part of this manual may
be copied or reproduced in any form without prior written consent from Universal
Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE
LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS
MADE IN THIS MANUAL. The information in this manual may be subject to change
without prior notice. Automator is a registered trademark of Universal Remote
Control, Inc. Power of Simple is a trademark of Universal Remote Control, Inc.
DoubleTap learning is a trademark of Universal Remote Control, Inc. All other
brand or product names are trademarks or registered trademarks of their respective
companies or organizations.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
Table of Contents
Getting Started ..........................................................2
Button Layout ........................................................... 3
Basic Setup ............................................................... 5
Pre-Programmed Method .......................................... 5
Learning Method ..................................................... 10
Volume Control Punch Through ............................. 13
Advanced Operation .............................................. 15
Advanced Setup ...................................................... 17
Editing Button Labels............................................... 17
Macro Button Setup ................................................ 20
Favorite Channel Setup ........................................... 22
Hiding and Adding Pages ....................................... 24
Erasing Settings ...................................................... 26
Cloning One Automator to Another ....................... 28
Recalling Pre-Programmed Settings ........................ 29
The Optional Expander .......................................... 30
Pre-Programmed Code Notes ................................ 32
Pre-Programmed Code Tables................................. 33
Frequently Asked Questions ................................... 48
Specifications/Warranty ........................................ 49
1
The Automator
Getting Started
Congratulations!
You’ve purchased one of the most advanced and easy to
setup control systems available. The Automator’s built-in
library includes thousands of different brands and models
of remote controls. In most systems, all you have to do to
setup the Automator is enter which brands and models
you own. If you own a component too new to be in the
library, the Automator uses advanced DoubleTapTM
Learning technology to quickly set each Automator
button, one at a time. Setting up your Automator to
replace all your existing remote controls can be done in
a few minutes. Basic Setup is described on pages 5 to 14.
The Automator’s exciting advanced features automate
and customize operation in many ways. You could use
Macro Setup to power on all of your components and
start the show with the press of one button! With the
Automator’s unique Favorite Channel capability, you can
tune in a channel with the press of one button instead of
entering the entire channel number. Any of the button
names on the display can be edited as you like. It is best
to delay any Advanced Setup (described on pages 15 to
29) until after you finish Basic Setup.
Battery Installation
Remove the battery compartment
cover by pressing up the cover
lock. Insert four AAA batteries into
the battery compartment as shown
in the diagram.
- +
+ - +
+ -
2
URC-200
Button Layout
TITLE
FAVORITE
CHANNEL
Button
LIGHT
Button
PAGE
Buttons
change the
page of
Display
Buttons.
Screen
Labeled
Display
Buttons
PAGE
Numbers
MAIN
Button
takes you
to the
MAIN
Menu.
FUNCTION
Buttons
3
The Automator
Selecting a New DEVICE Changes
All Button Commands Instantly
The Automator can operate ten different devices even
though it is only one remote control. Let’s try it now!
Press the MAIN button, then press the TV DEVICE button.
TV
DEVICE
Button
MAIN
Button
The top of the screen changes from MAIN to TV. Now
all of the buttons change their function to operate a TV.
Press the page buttons. Watch the labels of the display
buttons change with each press. There are five pages of
display buttons already labeled for TV operation. To
operate another of your components (e.g., VCR, DVD,
etc.), press the MAIN button to return to the MAIN
menu. The MAIN menu displays five of your Devices
on the screen. Simply press one of the screen-labeled
Device buttons to operate another device. If you don’t
see the device name you want, then use the PAGE
buttons to display the remaining five devices on page 2
of the MAIN menu.
Light Button
Press the LIGHT button to backlight all the buttons. To
turn off the backlighting, press the LIGHT button again,
or just wait ten seconds (the backlighting automatically
shuts itself off).
LIGHT
Button
4
URC-200
Basic Setup
You can start setting up your Automator using either the
Pre-Programmed Method or the Learning Method.
However, all the buttons of the Automator are setup at
once with the Pre-Programmed Method, so it is usually
faster than the one-button-at-a-time Learning Method.
Pre-Programmed Method
1
Power on the A/V component you wish to setup, so that
you can test codes by sending power off commands.
2
Refer to the pre-programmed code tables on pages
33 - 47 and write down the code numbers listed
for your A/V component. The code numbers are
listed by categories of devices, then by brand. See
page 33 for a category list.
3
Press and hold both the MAIN and ENT (Enter)
buttons for approximately three seconds. The top
of the display will show “SETUP”. You are in
SETUP mode now.
Note: You have 30 seconds to perform a step while you are
in SETUP mode. If you don’t press a button within that time,
the Automator will time out and return to normal operation.
MAIN
Button
ENT
Button
5
The Automator
4
Press the P-PRO button to select the
Pre-Programmed Method.
P-PRO
Button
The display changes so that you can select which
Device button to setup.
First
Five
Device
Names
Press a Page button to display the
other five Device names.
5
In this step you choose the name of the device
you’d like to setup. Use the cursor UP or DOWN
buttons to change the flashing name. When it is
correct, press the SELECT button.
UP
SELECT
DOWN
For Example: I wanted to setup the TV Device button first,
so I pressed the cursor UP or DOWN until “TV” was
flashing in the display.
The bottom of the display will flash “FROM TABLE”.
6
URC-200
6
In this step you verify the type of component you
plan to operate with this device button. If the
flashing name is correct, press SELECT.
SELECT
If the name flashing in the display is incorrect (for example,
you are setting up AUX to operate a Laser Disc Player), use
the UP and DOWN buttons to change the flashing name
to the correct type of component.
Note: Each name that appears in the display may
include several types of components. For example, the
DVD category includes DVD players and Laser Disc
Players. See page 33 for a list of component types each
Code Table contains.
7
Point the Automator at the component, then enter
the first three digit code number from your notes
using the numbered buttons. After you enter each
three digit number, look at the component to see
if it turned off.
Use the
number
buttons to
enter the
code
number.
Continue to enter code numbers until the
component powers off.
For Example: I have a Sony TV. I found the code
numbers 070, 139,147, 126, 185, 194 and 085 under
Sony in the TV TABLE. Using the numbered buttons on
the Automator, I entered 070 and looked at the TV. It
didn’t turn off, so I entered 139, then 147 and so on,
until I found the code that powered off the TV.
7
The Automator
Note: If your component fails to turn off after you have
entered all the code numbers listed for your brand, you
can scan through the other brands in the table by alternately
pressing the UP (or DOWN) and POWER OFF buttons.
Scan Up to
the next Code
Number
Scan Down to
the previous
Code Number
8
When the component turns off, save the code
number you entered by pressing the SAVE button
that appears on the screen.
Code
Number
You
Entered
SAVE
Button
9
Exit SETUP mode by pressing the MAIN button
two times.
MAIN
Button
8
URC-200
10
When the display shows “MAIN”, you are back in
normal operating mode. Now it’s time to test all
the buttons. If some buttons don’t work, try
repeating steps 1-9, to see if you can improve the
match to your component.
For Example: My Sony TV powered off with TV code
number 139. However the number buttons didn’t work
when I tested them. So, I repeated steps one to ten, using
other code numbers and eventually discovered that when
code number 185 is set, all the buttons work perfectly.
11
Repeat steps one through nine for each of your
devices. In most systems, you can finish basic
setup in just a few minutes and put all your old
remote controls away.
If you are still missing commands to control any
of your devices, use the Learning Method on the
next page.
9
The Automator
Learning Method
The Automator can learn commands from your old
remote controls one-button-at-a-time by following
these simple steps:
1
2
Line-up the Automator with your old remote control, head-to-head, one or two inches apart.
Press and hold the MAIN and ENT (Enter) buttons
at the same time for approximately three seconds.
The top of the display will show “SETUP”. You are
in SETUP mode now.
Note: You have 30 seconds to perform a step while you are
in SETUP mode. If you don’t press a button within that time,
the Automator will time out and return to normal operation.
3
Press the LEARN button.
LEARN
Button
The top of the screen will change to “LEARN”.
10
URC-200
4
The display will show a list of the first five devices.
5
Select the device you would like to teach
commands to by pressing the Device button.
Press
any of
the
Device
Buttons.
6
Press any button you want to teach a command to.
Press
any
Button.
Note: If you don’t see the display button you would like to
teach, use the PAGE buttons. The only buttons you can’t
teach are the PAGE and MAIN buttons.
Once you press a button, the top of the display will
change from “LEARN” to “READY”.
11
The Automator
7
Press and hold the button on your old remote control until the display changes to “RETRY”.
8
Press and hold the same button on your old remote
control once again.
The Automator’s unique DoubleTap learning technology
ensures compatibility with the widest variety of remote
controls ever!
9
Once you have taught the button twice, the display
will change to either “GOOD” or “FAILED”.
If the “GOOD” label appears on top of the display,
you were successful. Now, press the next button you
wish to teach. Keep repeating steps 6 through 9 until
you have learned all the buttons you want.
If the “FAILED” label appears on top of the display,
try to teach the same button in Automator once
again by repeating steps 6-8.
10
Continue to teach any commands from any of your
remote controls by repeating steps 5-9 (to go back
to step five, press MAIN once).
11
Once you completed teaching all the buttons, return
to normal operation by pressing the MAIN button
twice. Test all your new commands. If any of them
don’t work, try learning again using these notes:
Move to another room. Plasma TVs, sunlight, halogen or
quartz lighting can interfere with the learning process.
Although the old remote control seems to work fine,
change the batteries to fresh alkaline batteries.
Vary the distance between the remote controls
gradually. Try 1/4”, 1”, 2”and so on, up to 4 feet.
Tap the button on the original remote control instead of
pressing and holding it during the learning process.
12
URC-200
Volume Control Punch Through
In most home entertainment systems, the sound
volume is only controlled by one device. In some
systems, it is the TV speakers that make the sound, so
you would use the TV device on the Automator to raise
and lower the volume. In another system, it might be a
surround sound receiver and speakers that control the
sound, so you would use the Automator’s AUDIO
device to adjust the volume. Constantly switching the
Automator to TV or AUDIO to adjust the volume is
inconvenient in daily life.
You can use Punch Through to set the Automator’s
volume buttons to always control the sound in your
system. That way when the Automator is set to VCR or
DVD, the volume up, down and mute buttons will
work perfectly without switching back to AUDIO or
TV. Here’s how:
1
Enter Setup mode by pressing and holding both
MAIN and ENT for three seconds. The top of the
display shows that you are in SETUP mode now.
Note: You have 30 seconds for each step, otherwise the
Automator will time out automatically.
2
3
Press the PAGE UP button to get to page 2 of the
SETUP menu. Press the PUNCH button.
Press the VOL button. The display confirms by
displaying “VOL” at the top of the screen. This sets
up the group of three buttons (Volume Up, Volume
Down and Mute) in one action!
Select
Volume
13
The Automator
4
The bottom of the display flashes ”PUNCH TO”.
Press the device button for the device that doesn’t
have volume control commands yet (i.e.,DVD).
This is the device you are going to PUNCH TO for
the volume and mute commands.
Select
the Device
you want to
“Punch To”
Note: If you wish to PUNCH to the MAIN device, press
the POWER OFF button at this time.
5
The bottom of the display will then flash “PUNCH
FROM”. Now you select the device that has the
volume commands you want (i.e.,TV for systems
using the TV speakers, AUDIO for systems with
surround sound receivers). The bottom of the
display will flash “SAVED”.
6
Repeat steps 3-5 until all your devices operate the
volume perfectly. Press the MAIN button twice to
return to normal operating mode and test your
Punch Through settings.
Note: The Punch Through feature is not limited to
volume and can also be applied to channel or other
functions. If you find yourself switching to a particular
device frequently to use a group of controls, consider
using Punch Through for another group, as listed here:
VOL - Volume Up, Volume Down and Mute
CH - Channel Up, Channel Down and Prev. Channel
PLAY - Play, Stop, Pause, Rewind and Fast Forward
VOD - Guide, Menu, Info, Exit, Up, Down, Left, Right, Sel
POWER - Power On and Power Off
14
URC-200
Advanced Operation
Setting Backlight Options
You can adjust the amount of time that the Automator
backlight stays on by entering the SETUP mode and
proceeding to page two (using the PAGE UP button),
then pressing the LIGHT button on the display (not the
Backlight button). Then enter the amount of time you
would like the light to stay on using the number pad
(0-99 seconds). After making your selection, press the
SAVE button.
If you don’t want backlighting at all (this extends
battery life), press the ON button that appears on the
screen. The ON will change to OFF. Press the SAVE
button. Exit the setup mode by pressing the MAIN button.
The FAV Button
When you press the FAV button, the display changes to a
list of your favorite TV channels. Each button can be set
to instantly select the channel on your TV. There are
eight pages of five favorite channel buttons for a total of
40. Simply touch the PAGE buttons to display the other
favorite channels. To return to the last device you
viewed, press MAIN once (a second press will take you
to the MAIN menu).
FAV
Button
Favorite
Channel
Buttons
To setup your Favorite Channel buttons go to page 22.
15
The Automator
Adjusting Contrast
You can make the text darker by pressing both the
MAIN and cursor UP buttons at the same time. To
make the text appear lighter, press both the MAIN and
cursor DOWN buttons at the same time.
MAIN
Button
Cursor
Up & Down
Buttons
Contrast set low.
Contrast set high.
Transmitting (Busy Signal) Icon
When a command is being transmitted, an
icon will appear in the top right corner of the
display. It is a useful aid when setting up
Macros and FAVs, since it flashes with every
step of a sequence of commands.
16
URC-200
Advanced Setup
After you’ve finished all your basic setup, you can
choose to make operation easier by customizing the
Automator just the way you want, using the Advanced
Setup features described in this section.
Editing Button Labels
You can change the name of any of the display buttons
(including Favorite Channels) by following these steps:
1
Press and hold both the MAIN and ENT (Enter)
buttons for approximately three seconds. The top
of the display will show “SETUP”. You are in
SETUP mode now.
Note: You have 30 seconds to perform a step while you are
in SETUP mode. If you don’t press a button within that time,
the Automator will time out and return to normal operation.
2
Press the EDIT button.
EDIT
Button
3
The display changes to the EDIT menu. Press the
TEXT button.
TEXT
Button
17
The Automator
4
The screen displays the list of devices and “EDIT”
will appear at the top of the screen. Navigate to
the device and page where there is a button label
you want to EDIT, selecting between the FAV,
MAIN, DEVICE; then using the PAGE button.
Note : If you wish to change the name of a DEVICE
button, press the Page Up button twice. The top of the
display changes to MAIN, and you can navigate to MAIN
page 1 or page 2 before going on to Step 5.
5
Press the button you wish to edit. The first
character of your button label blinks.
Blinking
Character
EDIT flashes at the bottom of the screen.
UP Cursor
button deletes ALL text.
LEFT Cursor
button
moves blinking
character left.
RIGHT Cursor
button
moves blinking
character right.
DOWN Cursor
button deletes the currently
blinking character.
18
URC-200
6
Change the character by using any of the number
keys. Each press of the same number button
selects the next character of that number’s group,
as shown below.
A,B,C,1
J,K,L,4
S,T,U,7
D,E,F,2
M,N,O,5
V,W,X,8
G,H,I,3
P,Q,R,6
Y,Z,9
7
Once the character you want appears, move to the
next space by pressing the RIGHT cursor button.
8
When you are finished editing the button, press
the button you edited and “SAVED” will flash at
the bottom of the display.
To change any other button labels on the same
device, press the next button, then repeat steps 6-8.
If you wish to edit a button on another device,
press the MAIN button once, then repeat Steps 4-8.
9
Once you’ve finished editing buttons, press the
MAIN button four times to return to normal operation.
19
The Automator
Macro Button Setup
Imagine turning on your TV, your DVD player and
your surround sound receiver by pressing a single
button on your Automator! What would normally take
three remotes and three button pushes, the Automator
can accomplish with the press of one button. We call
that a “Macro”. Any of the Display buttons, the Power
On or the Power Off buttons (on any Device or Page)
can be set to be Macro buttons!
To setup a macro button, follow these easy steps:
1
Enter the SETUP mode by pressing and holding
both MAIN and ENT for three seconds.
Note: You have 30 seconds for each step, otherwise
the Automator will time out automatically.
2
Press the MACRO button. The top of the display
will show “MACRO”. The bottom of the display will
flash “SELECT”.
3
Navigate to the Device and Page where there is a
button you would like to set as a Macro button using
the MAIN, DEVICE, and PAGE buttons.
Advanced Options:
If you wish to set one of the DEVICE buttons as a macro,
on step 3, press the Page Up button twice. The top of the
display changes to MAIN, and you can navigate to MAIN
page 1 or page 2 before going on to Step 4.
Another option for DEVICE button macros is to only send
the macro if the button is pressed and held. This is setup
by entering a delay as the first step of the macro. The
amount of delay determines how long the user must press
the button before the macro is sent. The advantage of this
option is that a normal press of the DEVICE button will
simply switch devices without issuing the macro.
20
URC-200
4
Press the button you want to set as a Macro
button. The top of the screen will display the label
of the button you selected. At the bottom of the
screen it displays “STEP0”, indicating that no
macro steps have been entered yet.
5
Navigate to the Device and Page that has a button
you want in your macro using the MAIN, DEVICE
and PAGE buttons. Then press the button with the
command you want. Whenever a button is
pressed, another Macro step is counted and
displayed at the bottom of the screen.
Don’t worry about the number of steps. Each
macro button can store up to 190 steps, so you
are not likely to run out of steps!
Note: You can program delays in between commands
by pressing the PAUSE button. Each press adds half a
second to the delay.
6
Press the LIGHT button to end your macro. A new
screen displays three choices:
SAVE
Button
SAVE — If you are happy with your macro, press the
SAVE button.
UNDO — The UNDO button lets you erase the last step.
EXIT — The EXIT button erases all the macro steps.
7
Press the MAIN button twice to return to
normal operation.
21
The Automator
Favorite Channel Setup
Imagine surfing all your favorite channels, without ever
typing in a channel number. By simply setting up each
of the favorite channel buttons, you can make TV,
cable or satellite operation fun and easy.
To setup a Favorite Channel button, follow these steps:
1
Enter SETUP mode by pressing and holding both
MAIN and ENT for three seconds.
Note: You have 30 seconds for each step, otherwise
the Automator will time out automatically.
2
Press the FAV display button.
FAV
Button
The top of the display will show “FAV”. The bottom of the display will flash “SELECT”.
3
Use the Page buttons until you can see the name
(i.e., ABC, CBS, NBC) of the favorite channel you
wish to setup.
4
Press the favorite channel button you wish to
setup. The top of the screen changes to show the
channel name. The bottom of the screen displays
“STEP0”, indicating that you have not entered the
channel number yet.
5
Press either the TV, SAT or CABLE Device button
(select the device you use to enter channel numbers).
22
URC-200
6
Press each of the number buttons for the channel.
Note: If a number is repeated when setting the channel
(for example, channel “33” or “522”) it is usually best to
set a half second delay in between the identical numbers
by pressing the PAUSE button. Each press of the PAUSE
button increases the delay by a half second.
PAUSE
Button
Note: Some brands of television require an ENT(Enter)
command after the channel numbers.
7
Press the LIGHT button after you enter the
channel number. A new screen appears:
SAVE
Button
8
9
To save the channel you entered, press the SAVE
button. The UNDO button lets you erase the last
entry. The EXIT button erases all entries for this
button.
When you are finished setting up Favorite
Channel buttons, press the MAIN button twice to
return to normal operation.
23
The Automator
Hiding and Adding Pages
Each of your Automator Devices actually contains eight
pages. However, only five pages are visible in the
factory default setting. Three pages are hidden in each
device. If you wish to use the hidden pages, you can
ADD them. If you don’t want to use some of the
existing pages, you can HIDE them. You can add or hide
pages on devices OR on your favorite channel pages
using this simple process:
Note: Be sure to program your Macros before you hide
pages with potential macro in them. You can’t access
hidden pages during macro setup. However, after you
finish Macro setup, you can hide pages without affecting
operation of your macros.
1
Enter SETUP mode by pressing and holding both
MAIN and ENT for three seconds.
Note: You have 30 seconds for each step, otherwise the
Automator will time out automatically.
2
Press the EDIT button.
EDIT
Button
3
Press the PAGE button.
PAGE
Button
24
URC-200
4
“PAGE” appears at the top of the screen. Now, you
can navigate to any page, using the MAIN, DEVICE,
FAV, and PAGE buttons.
FAV
Button
DEVICE
Buttons
PAGE
Buttons
MAIN
Button
5
When you select a page, the top of the screen
indicates whether you want to “ADD?” or “HIDE?”
the page displayed. When you would like to change
a page’s visibility, press the LIGHT button.
This page is visible.
To HIDE it, press the
LIGHT button.
This page is hidden.
To ADD it, press the
LIGHT button.
6
You can continue to ADD or HIDE pages on other
devices by repeating Steps 4 and 5.
7
When you are finished adding and hiding pages,
press the MAIN button four times to return to
normal operation.
25
The Automator
Overview of Erasing
You can erase an individual button with a learned
command, a macro or a favorite channel. You can
erase an entire Device’s learned command or macro
buttons. You can also erase ALL your learned commands on all devices or all your macros or favorite
channels everywhere.
If you really want a fresh start, it is possible to reset
everything to the factory default condition.
Erasing Learned Buttons, Macros or Favs
1
Enter SETUP mode by pressing and holding both
MAIN and ENT for three seconds.
Note: You have 30 seconds for each step, otherwise the
Automator will time out automatically.
2
Press a PAGE button to display page two of Setup.
3
Press the ERASE button.
4
Press either the LEARN, MACRO or FAV button.
The following screen appears:
ALL — Erases all of the specified (Learned, Macro or
FAV) buttons everywhere in the Automator.
DEVICE— Erases all Learned or Macro buttons in a Device
(this option doesn’t appear for FAVS)
KEY— Erases one button only.
26
URC-200
5
If you press ALL, the Automator displays a SURE?
button. After the SURE button is pressed, all the
buttons will be erased.
SURE
Button
If you press DEVICE, a list of Devices will appear.
Press the device button that you wish to erase.
The bottom of the screen will flash ERASE twice,
then ERASED.
If you press KEY, you’ll have to navigate to the
Device and Page you want using the MAIN,
DEVICE and PAGE buttons. Press a button to erase
it. The bottom of the display will flash ERASE
twice, then ERASED.
6
To return to normal operating mode, press the
MAIN button four times.
Erasing the Entire Automator
To erase EVERYTHING, press and hold both the MAIN
and the STOP buttons for 10 seconds. After 10 seconds,
the RESET screen appears. Press the SURE button to
erase all of your settings and return to the factory
default setup.
SURE
Button
27
The Automator
Cloning One Automator to Another
If you own two or more Automators, you can copy and
transfer all the setup from one Automator to another.
Just follow these easy steps:
1
Enter SETUP mode by pressing and holding both
MAIN and ENT for three seconds.
Note: You have 30 seconds for each step, otherwise the
Automator will time out automatically.
2
Press a PAGE button to display page two of Setup.
3
Press the CLONE button.
4
Align the two Automators head-to-head, about an
inch apart.
5
Press the RECV display button on the new
Automator you would like to setup by cloning.
6
Press the SEND display button on the Automator
you previously setup.
7
Press the START button on the new Automator
and then press the START button on the
Automator you previously setup.
Note: Cloning typically takes about 40 seconds.
After completion, the cloned Automator will flash
“GOOD”.
8
Return to normal operation by pressing the MAIN
button twice.
28
URC-200
Recalling Pre-Programmed Settings
If you didn’t write down the code numbers you setup
your Automator with, you can recall them via this
simple process:
1
Enter SETUP mode by pressing and holding both
MAIN and ENT for three seconds.
Note: You have 30 seconds for each step, otherwise the
Automator will time out automatically.
2
Go to page two of the SETUP menu via the PAGE
UP button.
3
Press the RECAL button. The display changes to the
recall screens. The screen automatically switches
between four screens, alternately flashing page one
devices and code numbers then those for page two.
Note: Pay attention to the page numbers on the bottom
of the screen. Page 1 code numbers are the ones setup
for the Page1 Devices. Page 2 code numbers are the
ones setup for the Page 2 Devices.
4
Write down the code numbers as they appear. Page
32 of this manual gives a convenient list for you to
note your settings.
5
Return to normal operation by pressing the MAIN
button twice.
29
The Automator
The Optional Expander
You can use the Automator as you would your other
remote controls. It transmits very powerful line-of-sight
output using infrared light commands (invisible to the
naked eye). When you point the Automator at the components, expect the range to be between 30 and 50
feet. When the remote is not pointed in the general
direction of the components, the range will vary
(depending on reflective surfaces, lighting, etc.).
However, the Automator also sends radio signals in
every direction. By purchasing the optional Expander
(a radio receiver), you can operate your equipment
with the Automator 50 to 100 feet away (through
walls, doors, cabinets, inside or outside). Since the
Expander picks up the Automator's radio signals from
any direction, regardless of distance, the Automator
doesn’t have to be pointed!
Nothing has to be done to the Automator for this
feature to work. Every time you press a button on the
Automator, it sends both a standard infrared command
AND a radio signal. If you install the Expander kit, the
MRF-100 will receive the Automator’s radio signals
and translate them into the infrared commands that
control your components.
Note: The Automator's radio signals will not control
components directly. You must have an Expander to
receive the Automator's radio signals. Components
that came with "no pointing" radio remote controls cannot
be operated by the Automator unless the component can
be switched to standard infrared control via its internal
menus. Some remote control ceiling fans are radio only and
cannot be operated by the Automator.
30
URC-200
The Automator sends
radio signal to the
Expander, which is a
radio receiver.
The Expander converts radio signals to standard
infrared commands and sends them out via a
built-in front blaster to components in the same
cabinet space.
Self-adhesive “flashers” (included in the
Expander kit) affix to the front panels of your
components. The flashers relay infrared commands to components out-of-sight of the
MRF-100 front blaster. The flashers plug into
the MRF-100 rear flasher line output jacks.
Each flasher has a 10’ cable to easily reach
components on nearby shelves.
31
The Automator
Pre-Programmed Code Notes
Record the code numbers for your system here:
TV
CABLE/WEB TV
DVD
VCR
AUDIO
SAT
CD
VCR2
DVR
AUX
32
URC-200
Pre-Programmed Code Tables
The Automator’s Pre-Programmed code library is divided
into categories (TV, VCR, AUX, etc.). Each category
actually includes many types of components. For example,
the VCR category includes TV/VCR combo units.
Within each category, the code numbers are listed in
rows by brand (Sony, Panasonic, B & K, etc.). Some
brands have more than one three digit code for you to
try. Just circle the correct row and refer to it while you
setup (step-by-step instructions for using Pre-Programmed
codes are found on page 5).
TV
TVs, Plasmas,
Projectors and Monitors
Pages
34-36
CABLE Cable TV and Web TV
Pages
36-37
DVD
DVD Players
and Laser Disc Players
Pages
37-39
VCR
VCRs and TV/VCR Combo
Pages
39-41
AUDIO
Amps, Preamps
and A/V Receivers
Pages
41-43
SAT
Satellite Receivers
Pages
43
CD
CD Players and Changers
Pages
43-45
DVR
Digital Video Recorders (TiVo, Replay) Page
AUX
Tape Decks, Lighting Controls,
Custom Installation Products
33
Pages
45
45-47
TV - TVs, Plasmas, Projectors and Monitors
BRAND
ADMIRAL
ADVENT
AKAI
A MARK
AMPRO
AMSTRAD
ANAM
AOC
AUDIOVOX
BARCO
BLAUPUNKT
BROKSONIC
CAIRN
CANDLE
CAPEHART
CETRONIC
CITIZEN
CLASSIC
CONCERTO
CONTEC
CORONADO
CRAIG
CROWN
CURTIS MATHES
CXC
DAEWOO
DAYTRON
DREAMVISION
DWIN
DYNASTY
DYNATECH
EIKI
ELECTROHOME
EMERSON
FISHER
FUJITSU
FUNAI
FUTURETECH
GE
GOLDSTAR
HALL MARK
HITACHI
INFINITY
INFOCUS
JBL
JCPENNEY
JENSEN
JVC
KEC
KENWOOD
KLOSS
KMC
KTV
LG
LODGENET
LOEWE
CODE NUMBERS
072 081 161 160
247
197 146 248
112 143
167 073 157 183
052
043 054 056 080 112 131
197 004 112 058
076
233
088
238
201
197 002 003 004
058
043
197 002 003 004 043 101 103 143
043
004
043 050 051
143
043 054
043 143
197 101 004 143
043
004 016 043 044 076 103 114 125 127 143
004 143
235
177 257
043
062
187
143 024 076 196
028 048 043 155 005 197 004 047 050 051 076 096 143 151 153 154
007 057
198 246
028 043
043
160 144 165 073 197 008 009 034 056 074 130 155 161 004 091 157
113 116 102 004 106 112 119 127 143
004
011 163 166 004 009 010 012 023 075 143 158 072
164
230
164
004 024 197 008 009 030 065 101 143 156 160
013
038 034 070 083 145 199 210 240 241
043
197 070
002 059
143
043 197 143 154
113 116 102 004 106 112 119 127 143
072
164
34
TV (continued) - TVs, Plasmas, Projectors and Monitors
BRAND
LOGIK
LUXMAN
LXI
MAGNAVOX
MARANTZ
MATSUI
MEMOREX
METZ
MGA
MINERVA
MITSUBISHI
MTC
NAD
NEC
NIKEI
ONKING
ONWA
OPTONICA
ORION
PANASONIC
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
PROTON
QUASAR
RADIO SHACK
RCA
REALISTIC
ROCTEC
RUNCO
SAMPO
SAMSUNG
SANYO
SCOTT
SEARS
SELECO
SHARP
SIEMENS
SIGNATURE
SOLE
SONY
SOUNDESIGN
SPECTRICON
SSS
SUPRE MACY
SYLVANIA
TANDY
TATUNG
TECHNICS
TECHWOOD
TEKNIKA
TELEFUNKEN
TELERENT
TERA
CODE NUMBERS
072
004
166 007 015 052 081 160 164
164 059 197 003 060 061 004 063 064 127 022 160 094 239 256
197 164 184
164
007 072 004
088
197 004 024 028 042
088
109 124 024 004 028 040 042 146 191
197 004 062 101
015 025
132 130 134 197 040 016 024 056 019 236 237
043
043
043
019 081
096
034 056 080 092 164 208
197 003 059 060 064 164 004 024 056 063
164 005 093 038 197 003 004 059 127 184 206 239
135 025 197 018 023 116 190 234
004 143
144 160 161 165 167
004 131 058 143 171 173 193
034 056 092
019 004 143 043 127
160 165 065 156 144 161 197 004 024 056 152 023 074
007 019 043 047
186
168 169 178 179 180 181 182 183 073 157
197 058 004 202
050 089 101 105 004 127 143 160 228 229
166 007 020 053 057 082 187
028 043 004 048 143
015 030 004 007 028 057 143 094 160 082 165 166
189 200 205 227
081 019 014 170 028 029 004 022 143 175
088
072
231 232
070 139 147 126 185 194 085
028 004 003 043
112
004 043
002
197 003 059 060 063 064 164 044 160 127
081
056 062
034 080
004
002 003 004 024 028 043 072 101 143
037 046 086 087
072
172
35
TV (continued) - TVs, Plasmas, Projectors and Monitors
BRAND
TMK
TOSHIBA
TOTEVISION
UNIVERSAL
VIDEO CONCEPTS
VIDIKRON
VIDTECH
WARDS
WESTING HOUSE
YAMAHA
YORK
YUPITERU
ZENITH
ZONDA
CODE NUMBERS
004
015 138 030 007 040 062 101
143
008 009
146
174 184 188 192
004
004 008 009 019 028 060 061 063 064 072 074 143 164 034
076
197 004
004
043
073 072 095 103 157 183
112
CABLE - Cable TV and Web TV
BRAND
ABC
ADELPHIA
ADVANCED NEWHOUSE
ALTRIO
AMERICAST
ARCHER
ARMSTONG
AT&T BROADBAND
ATLANTIC BROADBAND
BELL SOUTH
BLUE RIDGE
BRESNAN
BUCKEYE COMM
CABLEVISION
CENTURION
CENTURY
CHARTER
CITIZEN
COGECO
COMBANO
COMCAST
COMSAT
COX DIGITAL
DIGICABLE
EAGLE
EASTERN
ECHOSTAR
ELECTRICORD
GEMINI
GENERAL ELECTRIC
GENERAL INSTRUMENT
GNC
GOLDEN CHANNEL
HAMLIN
HITACHI
CODE NUMBERS
004 103 003 039 042 046 053
043 074
043
043
099
005 007 014
074
074
043 074
099
043 074
074
074
043 074 108
092
007
043 074
007
074
080 081
043 074
074
043 074
101
020 030 040
057 066
106
032
008 054
072
074 103 104
099
030
049 050 055
103 055
36
CABLE (continued) - Cable TV and Web TV
BRAND
INSIGHT
JERROLD
MAGNAVOX
MASSILLON
MEDIA ONE
MEDICOM
MEMOREX
MITSUBISHI
MOTOROLA
MOVIE TIME
NCTC
NSC
OAK
PACE
PANASONIC
PARAGON
PHILIPS
PIONEER
PRUCER
PULSAR
RCA
RCN
RECOTON
REGAL
REGENCY
RODGERS
SAMSUNG
SCIENTIFIC ATLANTA
SEREN
SERVICE ELECTRIC
SHAW
SIGECOM
SONY
SPRUCER
STARCOM
STARGATE
SUSQUEHANNA
TIME WARNER
TOCOM
TOSHIBA
UNITED CABLE
UNIVERSAL
VIDEOTRON
VIEWSTAR
Wide Open West
ZENITH
CODE NUMBERS
074
074 004 103 002 003 008 009 010 069
010 012 064 079 095 094
074
107
074
052
102
074
028 032
074
015 028 038 071
031 037 053
043 074
044 047
052
006 012 013 020 085 095
043 103 034 051 063 076 105
059
052
047
074
098
049 050
057
043
030
043 011 003 041 042 045 046
043
074
074
043
096 108
047 078
002 004 008 009
008 030 097 104
043 074
043 074
039 040 056
052
004 053
005 007 014 032 035
043
012 015 018 086 087 088 089
043 099
052 060 093 100
DVD - DVD Players and Changers
BRAND
AIWA
ALPINE
APEX DIGITAL
CODE NUMBERS
146
098
087 111 115
37
DVD (continued) - DVD Players and Changers
BRAND
DENON
FUNAI
GE
GOVIDEO
HARMAN KARDON
HITACHI
INTEGRA
JVC
KENWOOD
KLH
KRELL
LEXICON
LG
MAGNAVOX
MARANTZ
MERIDIAN
MITSUBISHI
MYRYAD
NAD
NAKAMICHI
ONKYO
PANASONIC
PHILIPS
PIONEER
PROCEED
PROSCAN
RCA
SAMSUNG
SANSUI
SANYO
SHARP
SONY
SYLVANIA
SYMPHONIC
TATUNG
THOMPSON
TOSHIBA
VENTURER
YAMAHA
ZENITH
CODE NUMBERS
007 080
143
026 027
137
084 140
101
142
012
151
135
104
148
091 057 074
066 096
083 095
153
017
102 134
088
103
076 035
021 042 138 139 144 150
066 083 095 105
023 092 099 107 108 131
086
026 027
026 027
056 070 119
154
147
094
033 118 145
143
143
102
026 027
035 034 130 141
149
042 089
057 074 091
DVD - Laser Disc Players
BRAND
DENON
FUNAI
KENWOOD
MAGNAVOX
MARANTZ
MITSUBISHI
NAD
OPTIMUS
PANASONIC
CODE NUMBERS
206 207
120
152 013
032 121
211
121
121
049 013
113
38
DVD (continued) - Laser Disc Players
BRAND
PHILIPS
PIONEER
RADIO SHACK
RCA
REALISTIC
RUNCO
SANYO
SHARP
SONY
TECHNICS
THETA DIGITAL
TOSHIBA
YAMAHA
CODE NUMBERS
032
106 117 121
120
002
049
127
075
152 013
053 110
113
032
152 106
043 129
VCR - VCRs and TV/VCR Combos
BRAND
CODE NUMBERS
AIWA
AKAI
AMPRO
ANAM
AUDIO DYNAMICS
BROOKSONIC
CANON
CAPEHART
CRAIG
CURTIS MATHES
DAEWOO
DAYTRON
DBX
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GE
GO VIDEO
GOLDSTAR
HARMAN KARDON
HITACHI
INSTANTREPLAY
JCL
JCPENNEY
JENSEN
JVC
KENWOOD
LG
LLOYD
LXI
MAGIN
MAGNAVOX
MARANTZ
MARTA
034 161
016 146 043 046 124 125 142
072
031
012 023 039 043
035 037 129
028 031
108
003 040 135
031 041
111 116 117 119 005 007 010 065 108 110 112
108
012 023 039 043
034 053
059
006 029 035 017 025 027 031 034 036 037 046 101 129 131 138 153 162 116
003 010 008 009
034
031 072 147 063 107 109 144
132 136 155 040 115
101 106 114 013 020 012 123
012 045
004 026 150 018 034 043 063 137 160 013
031
031
012 013 015 040 066 101
043
048 043 130 150 055 060 012 031 050 152 166
014 048 034 047
101 106 114 013 020 012 123
034
034 003 009 017 106
040
067 031 034 068 041 156 164
067 069 012 031 156
101
39
VCR (continued) - VCRs and TV/VCR Combos
BRAND
MATSUI
MEI
MEMOREX
MGA
MINOLTA
MITSUBISHI
MTC
MULTITECH
NEC
NORDMENDE
OPTONICA
ORION
PANASONIC
PENTAX
PHILCO
PHILIPS
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
RADIO SHACK
RCA
REALISTIC
RICO
RUNCO
SALORA
SAMSUNG
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHINTOM
SIGNATURE
SONY
SOUNDESIGN
STS
SYLVANIA
SYMPHONIC
TANDY
TATUNG
TEAC
TECHNICS
TEKNIKA
THOMAS
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
CODE NUMBERS
027 030
031
101 003 010 014 031 034 053 072 102 134 139
045 046 059
013 020
059 061 151 013 020 045 046 051 142 049 168
034 040
024 034
012 023 039 043 048
043
053 054
025
066 070 145 083 133 140 157 163 074 167
013 020 031 063
031 034 067
031 067 034 101 054 071 156
101
021 013 048
108
072
002 014
066 145 075
123
107 109 144 147 158 041 145 013 020 140 034 040
003 008 010 014 031 034 040 053 054 101
058
148
014
102 104 113 115 112 120 032 040 066 107 109 122 125
022 043 048 135
003 010 007 014 134 102
017 037 112 129 131
003 008 010 014 081 013 101 009 017 073 112
149 054 031 159 165
024
034
056 057 058 077 052 003 078 076 031 149 154
034
013
031 034 059 067
034
010 034
039 043
034 039 043
031 070
031 019 034 101
034
006
112 131 079 008 059 047 082 013 042 081
040 101
040
012
048
012 034 046 141
040
003 013 017 024 031 034 040 053 054 131
40
VCR (continued) - VCRs and TV/VCR Combos
BRAND
YAMAHA
ZENITH
CODE NUMBERS
012 034 039 043
072 080 056 048 101 034 058
AUDIO - Amps, Preamps and A/V Receivers
BRAND
ADC
ADCOM
AIWA
AKAI
AMC
AMEND
AMX
ANGSTROM
ANTHEM
ARCAM
ATLANTIC TECHNOLOGY
AUDIO ACCESS
AUDIO ALCHEMY
AUDIO DESIGN
AUDIO EASE
AUDIO FILE
AUDIO MATRIX
AUDIO SOURCE
AUDIO TECHNICA
B&K
BOSE
BRYSTON
CARVER
CASIO
CHIRO
CINEMA SOUND
CITATION
CLARION
COMPAQ
CURTIS MATHES
DENON
EIGER
ELAN
ENLIGHTENED AUDIO
ESCIENT
FANFARE
FISHER
FLEXTRONICS
FOSGATE
FOSGATE AUDIONICS
GE
GOLDSTAR
HAFLER
HARMAN KARDON
HITACHI
IMERGE
INKEL
CODE NUMBERS
007
082 092 225 161 269 355 356 366
170 018 104 202 203 213 211 188
138 189
125 126 127 128 258 281 282 038
054
196
142
335 336 337 338 339
141
342
147
135
194 221 011
021 196 207
071
167
273
134
096 097
070 170 224 347
023
006 028 061 071 201 214 226 180 185 022 029 077 284
076
140
034 134
148 272
026
382
076
002 034 109 215 229 230 027 037 234 259 330 340 341 349 350
149
057 290
099 098
368
352
047 214 180 182 297
378
062 231
342
056 260
008
174
231 233 254 153 154 118 121 227 277 317 318 365
020
371
197
41
AUDIO (continued) - Amps, Preamps and A/V Receivers
BRAND
INTEGRA
JBL
JCPENNEY
JEFF ROWLAND
JENSEN
JVC
KENWOOD
KINERGETICS
KLH
KOSS
KRELL
KYOCERA
LEXICON
LINN
LUXMAN
LXI
MAGNAVOX
MARANTZ
MCINTOSH
MCS
MERIDIAN
MITSUBISHI
MONDIAL
MYRYAD
NAD
NAKAMICHI
NEC
NIRO
ONKYO
OPTIMUS
OUTLAW
PANASONIC
PARASOUND
PHAST
PHILIPS
PIONEER
POLKAUDIO
PROCEED
RCA
REALISTIC
REQUEST
REVOX
ROTEL
SAMSUNG
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHERWOOD
SONY
SOUNDESIGN
SOUNDMATTERS
SOUNDSTREAM
SSI
SUMO
CODE NUMBERS
354
263
076 216
206
058
240 163 191 114 266 279 291
026 066 145 146 181 190 197 192 182 199 151 222 180 005 280 374
220 140
331
216
150 072 376
007
120 235 236 237 357 358 359 360 361 362 363 364
124 377
137 139 052 165 115 004 009
076 056
086 164 152 208
006 028 031 040 063 185 186 251 265 119 289 296
238 286
076
100 012 013
242 243 204
157 158 042 043 081 112
276 293
186 113 283
111 244 245 172 183 287
176
343
017 046 064 107 108 187 079 080 090 179 209 270 275
026 041 138
342
032 195 219 177 292
129 130 132 261 294 295 333 334
196
249 250 251 063 119
014 033 039 044 045 050 069 159 168 116 035 078 198
029
144 268
010 048 117 156 067 288
019 056 073 075 095
351
162
074 083 085
016
040 048 110 119 065 228
047 059
019 091
076
026 094 131 175 181
024 038 055 102 103 105 106 051 030
018 093 223 247 248 160 166 015 101 184 218 271 353 369 372
036
375
084 088
068
171
42
AUDIO (continued) - Amps, Preamps and A/V Receivers
BRAND
SUNFIRE
TAEKWANG
TEAC
TECHNICS
THETA DIGITAL
TOSHIBA
WARDS
YAMAHA
ZENITH
CODE NUMBERS
344 345 346
138
005 019 049 111 212 217
122 176 193 219 178 177 200 257 262
136
060 087 198 278
180
026 253 169 067 173 205 264 232 089 264 274 285 332 373
143 210
SAT - DSS Satellite Receivers
BRAND
CABLEVISION / VOOM
ECHOSTAR / DISH
EXPRESSVU
GENERAL ELECTRIC
GENERAL INSTRUMENT
GOI
HITACHI
HTS
HUGHES
JVC
MAGNAVOX
MEMOREX
MITSUBISHI
MOTOROLA
NEXT LEVEL
PANASONIC
PAYSAT
PHILIPS
PROSCAN
RADIOSHACK
RCA
SAMSUNG
SKY
SONY
STAR CHOICE
TOSHIBA
UNIDEN
ZENITH
CODE NUMBERS
148
122
122
151 106 150
148
122
139 140
122
161 162 068 154 165 166 108 117
122
136
136
068 154
148
148
142 160
136
152 153 156 068 154 136 108 117
151 106 150
148
151 106 150
123 155 163
164
103
148
127 068 154 157 158
136
159
CD - CD Players and Changers
BRAND
ADCOM
AIWA
AKAI
AMC
AMEND
CODE NUMBERS
062 042
059 065 088 089 105 122 170 187
085 195 202
231 232
118
43
CD (continued) - CD Players and Changers
BRAND
ARCAM
AUDIO ACCESS
AUDIO EASE
AUDIO TECHNICA
BSR
CALIFORNIA AUDIO
CAPETRONIC
CARRERA
CARVER
CASIO
CLARINETTE
CREEK
CROWN
DENON
EMERSON
FISHER
FRABA
GENEXXA
GOLDSTAR
HAITAI
HARMAN KARDON
HITACHI
INKEL
JCPENNEY
JENSEN
JVC
KENWOOD
KOSS
KRELL
KYOCERA
LOTTE
LUXMAN
LXI
MAGNAVOX
MARANTZ
MCINTOSH
MCS
MEMOREX
MISSION
MITSUBISHI
MITSUMI
MODULAIRE
MONDIAL
MYRYAD
NAD
NAKAMICHI
NEC
NIKKO
NSM
ONKYO
OPTIMUS
PANASONIC
PARASOUND
PHILIPS
PIONEER
PROCEED
CODE NUMBERS
238
119 147
165
046
037 057
103 008
063
057 080
185 041 044 050 086 107 130 134 135 138 139 203 204 167
111 182
182
159
035
002 123
042 069 102
050 185 134 008
111
010 069 102
080
093
018 033 047 208
042 175
130 143 144
014 061 092 141
158
004 022 136 163 213 214 242 243
185 007 023 055 071 072 142 137 254
061
241
005
102
011 028 070 076 249 252
059
044 107
027 041 044 051 077 107 209 246
212 247
014 073 092
010
044 107
179
153
182
147
244 155
006 005 067 178
217 218 219 095
014 062
046
044 107
030 038 039 168 169
010 050 057 058 081 082 083 085 093 195
103 201 172 008 068 248
233 240
041 044 107 246 253
010 020 025 056 174 175 176
239
44
CD (continued) - CD Players and Changers
BRAND
PROTON
QUASAR
RADIO SHACK
RCA
REALISTIC
ROTEL
SAE
SANSUI
SANYO
SCOTT
SHARP
SHERWOOD
SIGNATURE
SONY
SOUNDESIGN
SUMO
SYLVANIA
SYMPHONIC
TAEKWANG
TANDY
TEAC
TECHNICS
TECHWOOD
THETA DIGITAL
TOSHIBA
VECTOR RESEARCH
VICTOR
WARDS
YAMAHA
YORX
CODE NUMBERS
044 107 228
103 008
182
017 042 150
042 050 051 102 181 182 187
044 107 161 178 250
044 107
044 069 107 128 171 190 125
050
069 102
026 031 051 066
003 019 051 096 112 115 119 166
033
048 081 097 126 133 177 225 226 164
251
155
044 107
052 181
195 085
010
015 034 036 051 052 101 131 140 079
060 103 200 172 184 008 068
076
234 235
006 067 091 160 148
080
004 022 114 124
185 033
024 046 054 186 183 245
182
DVR - Digital Video Recorder (TiVo, Replay)
BRAND
ECHOSTAR / DISH
HUGHES
JVC
PHILIPS
RCA
REPLAY NETWORKS
SONY
TIVO
CODE NUMBERS
122
108 117
122
108 090 117
109
075
104 105
090 117
AUX - Tape Decks
BRAND
AIWA
CARVER
DENON
FISHER
CODE NUMBERS
015 071 100 114
006 008 027 024 036
105 227 229
064
45
AUX (continued) - Tape Decks
BRAND
CODE NUMBERS
GOLDSTAR
HARMAN KARDON
JVC
KENWOOD
LINN
LUXMAN
MAGNAVOX
MARANTZ
MCINTOSH
MITSUBISHI
NAD
NAKAMICHI
ONKYO
OPTIMUS
PANASONIC
PHILIPS
PIONEER
QUASAR
SANSUI
SHARP
SHERWOOD
SONY
TEAC
TECHNICS
TOSHIBA
VICTOR
YAMAHA
011
233
106 116 239 240
005 013 023 026 064 145 146 181 190
124
035 137 139
027
014 027 056 065 087
238
242 243
029 048
244 245 025
002 012 016 017 018 019 115
026 054 055
007 010 032 088 195
027 087
003 039 047 050 066 098 222
007 088
027 113 119 224
026 057 131 175 181
038 004 028 030 033 034
020 022 052 084 089
009 059 212
007 010 076 088 109 122 193
112
106
021 026 031 067 040
AUX - Custom Installation Products
BRAND
3M
AIWA
ARCHER
AURORA MULTIMEDIA
AUTON
CELADON
CRESTRON
DMX
DRAPER SCREEN
DREAMVISION
DWIN
EVERQUEST
EXTRON
FAROUDJA
FUJI
HUNTERDOUGLAS
JERROLD
JVC
KENWOOD
LITE-TOUCH
LUTRON
MAKITA
CODE NUMBERS
152
164
155
220
191
221
213 214 215 216 217 218
156
204
097
080 253
206
151
184
209
219
153
185
185
208 257
158 159 077
186 201
46
AUX (continued) - Custom Installation Products
BRAND
MINDPATH
NILES
NSM
PIANO DISC PLUS
POLKAUDIO
RUSSOUND
SCIENTIFIC ATLANTA
SIMA
SOLO ELECTRONICS
SOMFY
SONY
STARCOM
TURBOSCAN
VELODYNE
X-10
XANTECH
CODE NUMBERS
205
160 187
161
085
162
081
163 156
082
207
078 079
164 165 166
153
167
203
183 093
168 169 170 171 172 188 189
47
The Automator
Frequently Asked Questions
What is a “macro” button?
It is an Automator button you set to make a lot of
things happen when you press it. For example, to
watch a DVD in most home theaters requires several
remote controls and many button presses (power up
the TV, power up the surround sound, power up the
DVD player, set the TV to the correct video input, set
the surround sound to the correct audio input and
finally; press play on the DVD player remote control).
Instead of pressing all of those buttons one at a time,
the Automator enables you to setup one button that
does it all automatically with one press. For more
information on how and why you should setup macro
buttons, watch the Quick Setup DVD tutorial or read
pages 20-21.
If the batteries run out, will I lose my settings?
No. The Automator stores all of your settings in
non-volatile FLASH memory. You could remove the
batteries for months, replace them at your convenience
and the Automator would still remember your settings.
Who can I call for more answers?
The Universal Remote Control technical support and
customer service staff are ready to answer any
questions you might have.
Call us at 1-914-835-4484
Monday - Friday, 9AM to 6PM (EST)
48
URC-200
Warranty
The URC-200 is covered against any manufacturers
defects or workmanship for a period of one year from
the date of purchase if purchased from an authorized
Universal Remote Control dealer. Units purchased
from online auction sites or other unauthorized
resellers have no warranty. This warranty does not
cover the following items:
- Damage from misuse, neglect, or acts of nature.
- Products that have been modified or incorporated
into other products.
- Products purchased more than 12 months ago.
- Units purchased from unauthorized dealers or
companies.
Specifications
Learning Capability - 720 IR commands at standard
frequencies (15kHz to 100kHz)
Macro Capability - 472 Macros of up to 190 steps each
IR Range (Line of Sight via Infrared): 30-50 feet,
depending on the environment
RF Range (radio frequency): 50 to 100 feet, depending
upon the environment
RF Frequency: 418MHz
Weight: 8 oz. (with batteries)
Size: 8.5” x 2.5” x 1”
Batteries: Four AAA Alkaline batteries included
LCD Size: 1.9” x 0.9”
49
MEMO
MEMO
MEMO
OCE-0024A Rev. 04