PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€107.37
€132.06
€110.82
€136.31
€132.96
€163.54
CLEVER ACOUSTICS
AMPLIFIERS
CPA 40 2x 20W Compact Amplifier
CRAM01
Ultra compact Class D amplifier
Stereo 2 x 20W 4 ohms
Rugged steel chassis with wall/panel mount ears
High efficiency design reduces heat generation and
reduces power consumption
Stereo RCA unbalanced line level inputs with gain
control
Independent L/R volume controls
Independent bass and treble controls
Stereo left and right channel outputs
Built-in intelligent limiter to eliminate the earth line noise
when connected with laptop or MP3
Automatic standby when no input signal is detected for 5
minutes
Automatic power on when input signal is detected
Switch on delay for added speaker protection
Convenient push terminal speaker outputs
Overload, high temp and short-circuit protection
Supplied with DC 24V power adapter
MA 130 100V 30W Mixer Amplifier
CRAM02
Mixer amplifier for paging and background music systems
Rated power from 30W to 60W
19'' rack mountable chassis
70V, 100V and low impedance 4-16 ohms speaker output
Two Mic and two aux inputs
Mic 1 with VOX priority and VOX level on front panel
Mic 1-2, Aux 1-2 and master volume controls
Bass/treble tone control
Short circuit, overload and high temp protection
Extensive protection with indicator from short-circuit,
overload and high temp.
LED VU meter with Peak and Protect indication
MA 160 100V 60W Mixer Amplifier
CRAM03
Mixer amplifier for paging and background music systems
Rated power from 30W to 60W
19'' rack mountable chassis
70V, 100V and low impedance 4-16 ohms speaker output
Two Mic and two aux inputs
Mic 1 with VOX priority and VOX level on front panel
Mic 1-2, Aux 1-2 and master volume controls
Bass/treble tone control
Short circuit, overload and high temp protection
Extensive protection with indicator from short-circuit,
overload and high temp.
LED VU meter with Peak and Protect indication
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€125.85
€154.79
€180.00
€221.39
€221.78
€272.79
CLEVER ACOUSTICS
AMPLIFIERS
MA 240 100V 40W Mixer Amplifier
CRAM04
Mixer amplifier for paging and background music systems
40Wrms rated power output
70V, 100V and low impedance 4-16 ohms speaker output
Two microphone, one AUX and one TEL input
Mic 1 via XLR input with +48V phantom power, VOX
priority and VOX level control
Mic 2 via 6.35mm jack
Mic 1-2, Aux 1-2 and master volume controls and
bass/treble tone control
Telephone input with automatic priority function over all
inputs
Short circuit, overload and high temp protection
Extensive protection with indicator from short-circuit,
overload and high temp.
LED VU meter with Protect indication
24V DC power power input
MA 260 100V 60W Mixer Amplifier
CRAM05
Mixer amplifier for paging and background music systems
Rated power from 60 to 120W
19'' rack mountable chassis (removable rack ears)
70V, 100V and low impedance 4-16 ohms speaker
outputs
Three Mic inputs and two AUX inputs
Mic 1 features VOX priority and VOX level on front panel
Mic 1-2-3, Aux 1-2 and master volume controls and
bass/treble tone control
Switchable +48V phantom power on Mic 1
Telephone input
Line output via L/R phono sockets
Short circuit, overload and high temp protection
Built-in priority functions for telephone override for Aux and
MIC1, 2 and 3
Optional DC input for use with battery backup power
sources or for operation using high capacity batteries
MA 360 100V 60W Mixer Amplifier
CRAM07
Mixer amplifier for paging and background music systems
Rated power from 60 to 240W
19'' rack mountable chassis
50V, 70V, 100V and low impedance 4-16 ohms speaker
output
Four balanced XLR microphone inputs with phantom
power, selectable priority, gain and volume control
4 stereo RCA line inputs with front panel selector switch
Built-in chime function with 2/4 tone selector and external
trigger contact
Balanced XLR line output suitable for us with external
power amplifiers
REC output for tape recorder
PRE-AMP output and PRE-AMP input for extra signal
processor
Master, MIC 1-4, AUX volume, Bass and treble controls
Optional DC input for use with battery backup power
sources or for operation using high capacity batteries
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€229.38
€282.14
€271.07
€333.41
€416.97
€512.88
CLEVER ACOUSTICS
AMPLIFIERS
MA 2120 100V 120W Mixer Amplifier
CRAM06
Mixer amplifier for paging and background music systems
Rated power from 60 to 120W
19'' rack mountable chassis (removable rack ears)
70V, 100V and low impedance 4-16 ohms speaker
outputs
Three Mic inputs and two AUX inputs
Mic 1 features VOX priority and VOX level on front panel
Mic 1-2-3, Aux 1-2 and master volume controls and
bass/treble tone control
Switchable +48V phantom power on Mic 1
Telephone input
Line output via L/R phono sockets
Short circuit, overload and high temp protection
Built-in priority functions for telephone override for Aux and
MIC1, 2 and 3
Optional DC input for use with battery backup power
sources or for operation using high capacity batteries
MA 3120 100V 120W Mixer Amplifier
CRAM08
Mixer amplifier for paging and background music systems
Rated power from 60 to 240W
19'' rack mountable chassis
50V, 70V, 100V and low impedance 4-16 ohms speaker
output
Four balanced XLR microphone inputs with phantom
power, selectable priority, gain and volume control
4 stereo RCA line inputs with front panel selector switch
Built-in chime function with 2/4 tone selector and external
trigger contact
Balanced XLR line output suitable for use with external
power amplifiers
REC output for tape recorder
PRE-AMP output and PRE-AMP input for extra signal
processor
Master, MIC 1-4, AUX volume, bass and treble controls
Optional DC input for use with battery backup power
sources or for operation using high capacity batteries
MA 3240 100V 240W Mixer Amplifier
CRAM09
Mixer amplifier for paging and background music systems
Rated power from 60 to 240W
19'' rack mountable chassis
50V, 70V, 100V and low impedance 4-16 ohms speaker
output
Four balanced XLR microphone inputs with phantom
power, selectable priority, gain and volume control
4 stereo RCA line inputs with front panel selector switch
Built-in chime function with 2/4 tone selector and external
trigger contact
Balanced XLR line output suitable for use with external
power amplifiers
REC output for tape recorder
PRE-AMP output and PRE-AMP input for extra signal
processor
Master, MIC 1-4, AUX volume, bass and treble controls
Optional DC input for use with battery backup power
sources or for operation using high capacity batteries
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€533.76
€656.53
€217.61
€267.66
€373.99
€460.01
CLEVER ACOUSTICS
AMPLIFIERS
MA 240Z5 100V 240W 5 Zone Mixer
Amplifier
5 Zone Mixer amplifier for paging and background music
system
5 x 50W outputs each with separate volume controls (total
240W)
Rated power: 240W
Rack mountable chassis
70V, 100V and low impedance 4-8 ohms speaker output
Four XLR microphone inputs with phantom power and gain
CRAM10
control
2 Dual RCA line inputs
Mic 1-4 with selectable priority over other inputs
Built-in chime, 2/4 tone selector
XLR line output for extra power amplifier
EMC output for emergency alarm
Telephone input with separate volume control
Master, MIC 1-4, line level volume, bass and treble control
Optional DC input for use with battery backup power
sources or for operation using high capacity batteries
Suitable for use with PM100 5 zone paging microphone
SL 120 100V 120W Slave Amplifier
CRAM11
19'' rack mount amplifier in 2U/3U chassis
Rated power options from 120W to 350W
70V, 100V and 4~16 ohms speaker outputs
Balanced XLR line input
Unbalanced 6.35mm jack line input
Balanced XLR line output
Unbalanced 6.35mm jack line output
Temperature, clip & short circuit protection
Power, signal, clip, protection and temp LEDs
GND/lift switch to prevent ground loop hum
24V DC & 240V AC inputs for maximum flexibility
Fan cooled
SL 240 100V 240W Slave Amplifier
CRAM12
19'' rack mount amplifier in 2U/3U chassis
Rated power options from 120W to 350W
70V, 100V and 4~16 ohms speaker outputs
Balanced XLR line input
Unbalanced 6.35mm jack line input
Balanced XLR line output
Unbalanced 6.35mm jack line output
Temperature, clip and short circuit protection
Power, signal, clip, protection and temp LEDs
GND/lift switch to prevent ground loop hum
24V DC & 240V AC inputs for maximum flexibility
Fan cooled
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€455.29
€560.00
€186.99
€230.00
€248.83
€306.06
CLEVER ACOUSTICS
AMPLIFIERS
SL 350 100V 350W Slave Amplifier
CRAM13
Rated power options from 120W to 350W
70V, 100V and 4~16 ohms speaker outputs
Balanced XLR line input
Unbalanced 6.35mm jack line input
Balanced XLR line output
Unbalanced 6.35mm jack line output
Temperature, clip and short circuit protection
Power, signal, clip, protection and temp LEDs
GND/lift switch to prevent ground loop hum
24V DC & 240V AC inputs for maximum flexibility
Fan cooled
MA 260MP 60W Mixer Amplifier With
MP3/FM
19" rack mountable chassis (removable rack ears)
70V, 100V and low impedance 4-16Ω loudspeaker outputs
Integral MP3 (USB/SD) player with FM radio tuner
Three microphone inputs and two AUX inputs (MIC 3
switchable MIC/LINE)
MIC
1
features
VOX priority and VOX level
CRAM14
MIC 1-2-3, AUX 1-2 and master volume controls and
bass/treble tone control
Switchable +48V phantom power on MIC 1
Line output via phono sockets
LED VU meter and over temperature indication
Short circuit, overload and high temperature protection
Optional DC input for use with battery backup power
sources or for operation using high capacity batteries
MA 2120MP 120W Mixer Amplifier With
MP3 / FM
19" rack mountable chassis (removable rack ears)
70V, 100V and low impedance 4-16Ω loudspeaker outputs
Integral MP3 (USB/SD) player with FM radio tuner
Three microphone inputs and two AUX inputs (MIC 3
switchable MIC/LINE)
MIC 1 features VOX priority and VOX level
CRAM15
MIC 1-2-3, AUX 1-2 and master volume controls and
bass/treble tone control
Switchable +48V phantom power on MIC 1
Line output via phono sockets
LED VU meter and over temperature indication
Short circuit, overload and high temperature protection
Optional DC input for use with battery backup power
sources or for operation using high capacity batteries
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€397.52
€488.95
€650.67
€800.33
CLEVER ACOUSTICS
AMPLIFIERS
MA 2240MP 240W Mixer Amplifier With
MP3 / FM
19" rack mountable chassis (removable rack ears)
70V, 100V and low impedance 4-16Ω loudspeaker outputs
Integral MP3 (USB/SD) player with FM radio tuner
Three microphone inputs and two AUX inputs (MIC 3
switchable MIC/LINE)
MIC
1
features
VOX priority and VOX level
CRAM16
MIC 1-2-3, AUX 1-2 and master volume controls and
bass/treble tone control
Switchable +48V phantom power on MIC 1
Line output via phono sockets
LED VU meter and over temperature indication
Short circuit, overload and high temperature protection
Optional DC input for use with battery backup power
sources or for operation using high capacity batteries
MA 4060MP 4 Zone Mixer Amplifier With
MP3 / FM Tuner
All source inputs can be matrix assigned to the 4 zone
outputs simultaneously
The 5 inputs channels plus onboard MP3 player and FM
tuner
Three microphone/line inputs with bass, treble, volume
and gain control
Two AUX phono inputs with bass, treble, volume and gain
control
MP3 player with SD and USB inputs
4 zone remote paging microphone input via RJ45 (requires
CRMIC06 paging microphone)
CRAM17
Versatile loudspeaker outputs for each four channels: 70V,
100V and 4-16Ω
Line level, balanced outputs for each zone output
RS232 serial control port for third party system
communication
Priority input to override other inputs
Input priority level from high to low: remote mic, priority
input and telephone input and MIC 1
Output for monitor loudspeaker, 1W, 8Ω
Extensive protection including thermal, short-circuit, clip
and overload with indicators
Ground lift switch
Fan cooled
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€709.84
€873.11
€961.69
€1,182.87
CLEVER ACOUSTICS
AMPLIFIERS
MA 4120MP 4 Zone Mixer Amplifier With
MP3 / FM Tuner
All source inputs can be matrix assigned to the 4 zone
outputs simultaneously
The 5 inputs channels plus onboard MP3 player and FM
tuner
Three microphone/line inputs with bass, treble, volume
and gain control
Two AUX phono inputs with bass, treble, volume and gain
control
MP3 player with SD and USB inputs
4 zone remote paging microphone input via RJ45 (requires
CRMIC06 paging microphone)
CRAM18
Versatile loudspeaker outputs for each four channels: 70V,
100V and 4-16Ω
Line level, balanced outputs for each zone output
RS232 serial control port for third party system
communication
Priority input to override other inputs
Input priority level from high to low: remote mic, priority
input and telephone input and MIC 1
Output for monitor loudspeaker, 1W, 8Ω
Extensive protection including thermal, short-circuit, clip
and overload with indicators
Ground lift switch
Fan cooled
CLEVER ACOUSTICS
MIXERS
ZM8 Matrix Zone System
Each channel input is provided with individual microphone,
music, master volume control, each line and paging
console input with gain control, microphone input with gain,
bass and treble tone control
Each channel output is provided with individual gain, bass
and treble tone control, a gain control is also provided for
CRAM19
8 zone voice alarm contact closure to activate built-in tone
voice alarm
Alert, evacuation and alarm; three styles of pre-recorded
chimes are provided with tone control
EMC and ground for external voice alarm generator input
Connected via standard RJ45 terminated CAT 5 cable
4 swift keys for direct all channel BGM and paging access
5 levels of priority from highest to lowest are: MIC 1, fire
alarm, remote paging console, remote control panel and
background music
AC 110V or 240V input with voltage switch and DC 24V
operation
Monitor output with independent volume control
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€72.16
€88.75
€64.13
€78.87
€68.13
€83.81
€282.16
€347.06
€218.89
€269.23
CLEVER ACOUSTICS
AMPLIFIERS
ZM8 Wall Plate - Audio Input + Source Select
CRAM19A
Remote line and microphone via XLR inputs with gain
controls
Source selection and volume control
Zone LED indicator with up/down buttons
DC 24V power supply from controller
Metal back box supplied
Only for use with the ZM8 Zone Mixer (CRAM19)
ZM8 Wall Plate - Source Select
CRAM19B
Music source selection and volume control
Zone LED indicator with up/down buttons
DC 24V power supply from controller
Metal back box supplied
Only for use with the ZM8 Zone Mixer (CRAM19)
ZM8 Wall Plate - Two Remote Mic Inputs
CRAM19C
Two remote microphone inputs with volume, bass, and
treble controls
Zone LED indicator with up/down buttons
DC 24V power supply from controller
Metal back box supplied
Only for use with the ZM8 Zone Mixer (CRAM19)
CDMP 50 1U CD/MP3 Player
CD, SD/MMC card and USB 2.0 media player
Mechanical anti-shock and 40 second ESP (Electronic Skip
Protection)
LCD display
Plays MP3 and WMA audio files
CRAM20
ID3 tags displayed (scrolling)
Playback: Continuous, Random Play and User Programmed
Repeat functions: Track, Folder or All
Stereo outputs via balanced XLR or unbalanced RCA
IR remote control (batteries not included)
1U 19" rack mountable with removable rack ears
DAB 50 1U DAB / FM Radio Tuner
CRAM21
DAB and FM radio tuner
Auto/manual tuning
20 preset memory (10 DAB, 10 FM)
LCD screen
Radio station display
Radio text (scrolling)
Automatic radio controlled time and date
Stereo outputs via balanced XLR or unbalanced RCA
IR remote control (batteries not included)
1U 19" rack mountable with removable rack ears
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€601.05
€739.29
CLEVER ACOUSTICS
AMPLIFIERS
SL 4120 100V 4 X 120W Slave Amplifier
Four separate amplifiers in a single 19" rack mount chassis
70V, 100V and 4-16Ω loudspeaker outputs
Balanced XLR line input for each channel
CRAM22
Convenient phoenix type terminal block output connectors
Temperature, over-load, clip and short circuit protection
Power, signal, clip, protection and temperature LEDs
Fan cooled
SL 4240 100V 4 X 240W Slave Amplifier
Four separate amplifiers in a single 19" rack mount chassis
70V, 100V and 4-16Ω loudspeaker outputs
Balanced XLR line input for each channel
CRAM23
Convenient phoenix type terminal block output connectors
Temperature, over-load, clip and short circuit protection
Power, signal, clip, protection and temperature LEDs
Fan cooled
€821.46 €1,010.40
CLEVER ACOUSTICS
SPEAKERS
MH 50 100V 50W Music Horn Speaker
CRSP01
Waterproof horn speaker for outdoor applications
Extreme sound dispersion angle
Ideal for voice announcement and background music
IP rating: IP66
Wide frequency response from 90Hz to 20kHz
Built-in 100V/70V transformer
3.5, 4.5, 9, 12.5, 25, 50W power taps at 100V line
ABS enclosure
Supplied with adjustable mounting bracket
€124.09
€152.63
€118.18
€145.36
€73.09
€89.90
SP 30 100V 30W Music Horn Speaker
CRSP02
Waterproof horn speaker for outdoor applications
Extreme sound dispersion angle
Ideal for voice announcement and background music
IP rating: IP66
Wide frequency response from 300Hz to 18kHz
Built-in 100V/70V transformer
15W & 30W power taps at 100V line
ABS enclosure
Supplied with adjustable mounting bracket
CLM 420 100V 20W Column Speaker
(Shipped in 2's)
CRSP03
Built-in 100V/70V transformer
4 x 2.5''/8 x 2.5'' full range driver
4 x power taps with rotary selector
Aluminium enclosure and grille in white
Supplied with a pair of adjustable steel mounting brackets
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€103.11
€126.83
€20.03
€24.64
€10.69
€13.15
€12.77
€15.71
€47.51
€58.43
€52.54
€64.63
CLEVER ACOUSTICS
SPEAKERS
CLM 840 100V 40W Column Speaker
(Shipped in 2's)
CRSP04
Built-in 100V/70V transformer
4 x 2.5''/8 x 2.5'' full range driver
4 x power taps with rotary selector
Aluminium enclosure and grille in white
Supplied with a pair of adjustable steel mounting brackets
CS 46WP 100V 4" 6W Ceiling Speaker
CRSP06
4'' full range driver
Built-in 100V/70V transformer
3W and 6W power taps at 100V line
Metal grille with ABS baffle and back can
RAL9016 White
Fitted with trailing cable
Spring clip mounting for easy installation
Supplied with template to aid installation
CS 56LC 100V 5" 6W Ceiling Speaker
CRSP09
5'' ceiling speaker
Dual cone woofer for extended upper frequency response
Low profile design blends into emvironments
3 power taps @ 100V: 1.5W, 3W and 6W
ABS baffle with metal grille
Spring clip mounting for fast installation
Supplied with template to aid installation
CS 69LC 100V 6" 9W Ceiling Speaker
CRSP10
6'' ceiling speaker
Dual cone woofer for extended upper frequency response
Low profile design blends into environments
3 power taps @ 100V: 3W, 6W and 9W
ABS baffle with metal grille
Spring clip mounting for fast installation
Supplied with template to aid installation
CS 520HP 100V 5" 20W Ceiling Speaker
CRSP11
Coaxial, 2-way design delivers wide frequency response
Five power taps (100V) plus 8 ohms low impedance input
Metal grille, ABS baffle and metal back can
Flush mount dog-ear mounting for fast installation
Rotary wattage tap
Spring clip connection
Supplied with template to aid installation
CS 630HP 100V 6" 30W Ceiling Speaker
CRSP12
Coaxial, 2-way design delivers wide frequency response
Five power taps (100V) plus 8 ohms low impedance input
Metal grille, ABS baffle and metal back can
Flush mount dog-ear mounting for fast installation
Rotary wattage tap
Spring clip connection
Supplied with template to aid installation
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€62.57
€76.96
€40.03
€49.23
€50.06
€61.57
€25.07
€30.84
€79.60
€97.90
€90.09
€110.81
CLEVER ACOUSTICS
SPEAKERS
CS 840HP 100V 8" 40W Ceiling Speaker
CRSP13
Coaxial, 2-way design delivers wide frequency response
Five power taps (100V) plus 8 ohms low impedance input
Metal grille, ABS baffle and metal back can
Flush mount dog-ear mounting for fast installation
Rotary wattage tap
Spring clip connection
Supplied with template to aid installation
CS 56F 100V 5" 6W Ceiling Speaker +FD
CRSP14
Built-in 100V/70V transformer
Coaxial, 2-way design delivers wide frequency response
Five power taps (70V/100V)
Metal grille, baffle and back can
system
Ceramic connector block connection
Supplied with template to aid installation
CS 66F 100V 6" 6W Ceiling Speaker +FD
CRSP15
Built-in 100V/70V transformer
Coaxial, 2-way design delivers wide frequency response
Five power taps (70V/100V)
Metal grille, baffle and back can
system
Ceramic connector block connection
Supplied with template to aid installation
CSW 56 100V 5" 6W Wall Mount Speaker
CRSP16
Built-in 100V/70V transformer
2-way design delivers wide frequency response
Three power taps (70V/100V)
Metal grille and ABS enclosure
Fast, easy wall mount installation
Spring clip mounting for fast installation
PS 620 100V 6" 15W Projector Speaker
CRSP17
Built-in 100V/70V transformer
Metal grille and ABS enclosure
Adjustable wall bracket
Weatherproof construction suitable for outdoors
6'' full range loudspeaker
Two power taps (70V/100V)
Uni-directional dispersion
PS 620T 100V 6" 20W Projector Speaker
CRSP18
Built-in 100V/70V transformer
Metal grille and ABS enclosure
Adjustable wall bracket
Weatherproof construction suitable for outdoors
2 x 6'' full range loudspeaker
Three power taps (70V/100V)
Bi-directional dispersion, suitable for use in corridors
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€53.06
€65.26
€40.03
€49.23
€18.54
€22.80
€80.08
€98.50
€45.39
€55.83
€45.39
€55.83
CLEVER ACOUSTICS
SPEAKERS
HS 730 100V 30W ABS Horn Speaker
CRSP19
Built-in 100V/70V transformer
High intelligibility speech reproduction
Rugged ABS enclosure
Adjustable wall bracket
Weatherproof construction suitable for outdoors
Two power taps (70V/100V)
HS 715 100V 15W ABS Horn Speaker
CRSP20
Built-in 100V/70V transformer
High intelligibility speech reproduction
Rugged ABS enclosure
Adjustable wall bracket
Weatherproof construction suitable for outdoors
Two power taps (70V/100V)
HS 158R 8Ohm 15W ABS Horn Speaker
CRSP21
Low impedance 8 ohms input
High intelligibility speech reproduction
Rugged ABS enclosure
Adjustable wall bracket
Weatherproof construction suitable for outdoors
PDS 615 100V 15W Pendant Speaker
CRSP22
Built-in 100V/70V transformer
Dual cone woofer design delivers wide frequency response
Three power taps (70V/100V)
Metal grille and ABS enclosure
5m suspension cable complete with internal steel safety
core
Supplied with ceiling plate
BGS 25 White 8 Ohm Speakers (Pair)
CRSP23
CRSP24
2-way speakers
Complete with mounting brackets
Supplied in pairs
Available in Black and White
Optional mounting by M6 screw sockets
Robust housing
Freq. Range: 70Hz~18kHz
Max Calculated SPL: 88dB
Power (RMS): 25W
Power (Max): 50W
LF Transducer: 4" Polypropylene
HF Transducer: 1" Mylar
Impedance: 8 Ohms
Connections: 2 x Binding terminals
AS ABOVE BUT IN BLACK
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€65.42
€80.47
€65.42
€80.47
€91.40
€112.42
€91.40
€112.42
€64.14
€78.89
€64.14
€78.89
CLEVER ACOUSTICS
SPEAKERS
BGS 35 White 8 Ohm Speakers (Pair)
CRSP25
CRSP26
2-way speakers
Complete with mounting brackets
Supplied in pairs
Available in Black and White
Optional mounting by M6 screw sockets
Robust housing
Freq. Range: 60Hz~18kHz
Max Calculated SPL: 89dB
Power (RMS): 35W
Power (Max): 70W
LF Transducer: 5" Polypropylene
HF Transducer: 1" Mylar
Impedance: 8 Ohms
Connections: 2 x Binding terminals
AS ABOVE BUT IN BLACK
BGS 50 White 8 Ohm Speakers (Pair)
CRSP27
CRSP28
2-way speakers
Complete with mounting brackets
Supplied in pairs
Available in Black and White
Optional mounting by M6 screw sockets
Robust housing
Freq. Range: 55Hz~20kHz
Max Calculated SPL: 89dB
Power (RMS): 50W
Power (Max): 100W
LF Transducer: 6.5" Polypropylene
HF Transducer: 1" Mylar
Impedance: 8 Ohms
Connections: 2 x Binding terminals
AS ABOVE BUT IN BLACK
BGS 25T White 100V Speakers (Pair)
CRSP29
CRSP30
2-way 100V Line speakers
Complete with mounting brackets
Supplied in pairs
Adjustable wattage selector
Available in Black and White
Optional mounting by M6 screw sockets
Robust housing
Freq. Range: 70Hz~18kHz
Max Calculated SPL: 88dB
Power (RMS): 25W
Power (Max): 50W
LF Transducer: 4" Polypropylene
HF Transducer: 1" Mylar
Impedance: 8 Ohms or 2/4/8/16W
Connections: 2 x Binding terminals
AS ABOVE BUT IN BLACK
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€82.93
€102.00
€82.93
€102.00
€109.57
€134.77
€109.57
€134.77
CLEVER ACOUSTICS
SPEAKERS
BGS 35T White 100V Speakers (Pair)
CRSP31
CRSP32
2-way 100V Line speakers
Complete with mounting brackets
Supplied in pairs
Adjustable wattage selector
Available in Black and White
Optional mounting by M6 screw sockets
Robust housing
Freq. Range: 60Hz~18kHz
Max Calculated SPL: 89dB
Power (RMS): 35W
Power (Max): 70W
LF Transducer: 5" Polypropylene
HF Transducer: 1" Mylar
Impedance: 8 Ohms or 2/4/8/16W
Connections: 2 x Binding terminals
AS ABOVE BUT IN BLACK
ACT 35 White Powered Speakers (Pair)
CRSP33
2-way stereo speakers
Built-in amplifier
Complete with mounting brackets
Supplied in pairs
Available in Black and White
Optional mounting by M6 screw sockets
Connecting leads included
Robust housing
Independent bass and treble controls
Signal inputs
Master volume control
IEC Power in socket
Freq. Range: 60Hz~18kHz
Sensitivity: 89dB
Power output: 25W
LF Transducer: 5" Polypropylene
HF Transducer: 1" Mylar
Connections: 2 x RCA phono input sockets
Amplifier
Freq. Range: 20Hz~20kHz
Equalisation: 2 bands EQ + 10dB
Gain: 30dB (max)
Power output: 2 x 17.5W RMS
CRSP34
AS ABOVE BUT IN BLACK
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€52.03
€64.00
€52.03
€64.00
€70.93
€87.24
€70.93
€87.24
CLEVER ACOUSTICS
SPEAKERS
WPS 25 White 8 Ohm Weatherproof
Speakers (Pair)
CRSP35
CRSP36
2-way speakers
Complete with mounting brackets
Supplied in pairs
Available in Black and White
Optional mounting by M6 screw sockets
Robust housing
WPS Series suitable for installation outside in sheltered
conditions
Freq. Range: 70Hz~18kHz
Max Calculated SPL: 88dB
Power (RMS): 25W
Power (Max): 50W
LF Transducer: 4" Polypropylene
HF Transducer: 1" Mylar
Impedance: 8 Ohms
Connections: 2 x Binding terminals
AS ABOVE BUT IN BLACK
WPS 35 White 8 Ohm Weatherproof
Speakers (Pair)
CRSP37
CRSP38
2-way speakers
Complete with mounting brackets
Supplied in pairs
Optional mounting by M6 screw sockets
WPS Series suitable for installation outside in sheltered
conditions
Freq. Range: 60Hz~18kHz
Max Calculated SPL: 89dB
Power (RMS): 35W
Power (Max): 70W
LF Transducer: 5" Polypropylene
HF Transducer: 1" Mylar
Impedance: 8 Ohms
Connections: 2 x Binding terminals
AS ABOVE BUT IN BLACK
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€101.72
€125.12
€101.72
€125.12
€69.40
€85.37
€69.40
€85.37
CLEVER ACOUSTICS
SPEAKERS
WPS 50 White 8 Ohm Weatherproof
Speakers (Pair)
CRSP39
2-way speakers
Complete with mounting brackets
Supplied in pairs
Optional mounting by M6 screw sockets
WPS Series suitable for installation outside in sheltered
conditions
Freq. Range: 55Hz~20kHz
Max Calculated SPL: 89dB
Power (RMS): 50W
Power (Max): 100W
Impedance: 8 Ohms
Connections: 2 x Binding terminals
CRSP40
AS ABOVE BUT IN BLACK
WPS 25T White 100V Weatherproof
Speakers (Pair)
CRSP41
CRSP42
2-way 100V Line speakers
Complete with mounting brackets
Supplied in pairs
Adjustable wattage selector
Optional mounting by M6 screw sockets
WPS Series suitable for installation outside in sheltered
conditions
Freq. Range: 70Hz~18kHz
Max Calculated SPL: 88dB
Power (RMS): 25W
Power (Max): 50W
LF Transducer: 4" Polypropylene
HF Transducer: 1" Mylar
Impedance: 8 Ohms or 2/4/8/16W
Connections: 2 x Binding terminals
AS ABOVE BUT IN BLACK
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€88.33
€108.65
€88.33
€108.65
€53.96
€66.37
€53.96
€66.37
€157.63
€193.88
CLEVER ACOUSTICS
SPEAKERS
WPS 35T White 100V Weatherproof
Speakers (Pair)
CRSP43
CRSP44
2-way 100V Line speakers
Complete with mounting brackets
Supplied in pairs
Adjustable wattage selector
Available in Black and White
Optional mounting by M6 screw sockets
Robust housing
WPS Series suitable for installation outside in sheltered
conditions
Freq. Range: 60Hz~18kHz
Max Calculated SPL: 89dB
Power (RMS): 35W
Power (Max): 70W
LF Transducer: 5" Polypropylene
HF Transducer: 1" Mylar
Impedance: 8 Ohms or 2/4/8/16W
Connections: 2 x Binding terminals
AS ABOVE BUT IN BLACK
BGS 20T White 100V Speakers (Pair)
CRSP45
2-way loudspeakers
Complete with Quick-Fixx® mounting brackets
Supplied in pairs
Adjustable wattage selection
Robust white housing
Polypropylene LF and Mylar HF
BGS 20T Black 100V Speakers (Pair)
CRSP46
2-way loudspeakers
Complete with Quick-Fixx® mounting brackets
Supplied in pairs
Adjustable wattage selection
Robust black housing
Polypropylene LF and Mylar HF
CLEVER ACOUSTICS
MICROPHONES
PM 100 Paging Microphone (5 Zone)
CRM
IC01
Remote paging microphone with input priority over MIC 1,
siren and chime except for EMC and TEL input
Condenser gooseneck microphone
2/4 tone selectable chimes
5 zone, all zone, talk and chime buttons
Volume control over chime, mic and master
LED amplifier output level meter
DC power socket and DC 24V input (external DC power
supply is needed when cable distance is more than 50
meters between amplifier and PM-100)
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€56.31
€69.26
€60.90
€74.91
€29.09
€35.78
€77.14
€94.88
€205.88
€253.23
€180.33
€221.81
CLEVER ACOUSTICS
MICROPHONES
PM 200 Dynamic Paging Mic with Chime
CRM
IC02
Remote paging microphone with built-in chime and
adjustable volume
Dynamic microphone element
Talk push button
Connection: 3-pin XLR
Supplied with 3-pin XLR to 6.35mm mono jack cable
Powered either by 9V PP3 battery or optional 9V DC input
(PSU not supplied)
PM 300 Condenser Paging Mic
CRM
IC03
Condenser paging microphone
Connection: Balanced 3-pin XLR
Talk push button
Requires +48V phantom power
PM 400 Condenser Paging Mic
CRM
IC04
Condenser paging microphone
Connection: Balanced 3-pin XLR
Talk push button
Battery powered
PM 500 Condenser Paging Mic
CRM
IC05
Powered by phantom power from amplifier
Red LED indicator for service
Connections: 3-pin XLR
High sensitivity flexible fixed gooseneck
Unidirectional condenser microphone
Built-in low frequency attenuator
PM 600 4 Zone Paging Mic
CRM
IC06
Zone, group zone and all zone paging capacity
DC 24V powered by the amplifier at max 1km distance
Built-in pre announcement chime with 2 or 4 tone selector
Microphone, chime and master volume control
10 segment level meter
PM ZM8 8 Zone Paging Mic
CRM
IC07
8 zone selector with state indication
Talk and all zone paging swift keys are provided
2 or 4 tone chime with selector and off switch
Volume controls are provided for chime and microphone
Indicators includes individual zone, all zone, busy, paging,
power, output level to provide a direct visualisation
Only for use with the ZM8 Zone Mixer (CRAM19)
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€10.40
€12.79
€14.20
€17.47
€17.48
€21.50
€12.53
€15.41
€16.24
€19.98
€19.62
€24.13
CLEVER ACOUSTICS
CONTROLLERS
VC 20 100V 20W Volume Control
CRV
OL01
11 volume positions (10 + off)
Rugged plastic facia
Wall screws included (2 x M3 screws)
Requires back box (not supplied)
VC 40 100V 40W Volume Control
CRV
OL02
11 volume positions (10 + off)
Rugged plastic facia
Wall screws included (2 x M3 screws)
Requires back box (not supplied)
VC 60 100V 60W Volume Control
CRV
OL03
11 volume positions (10 + off)
Rugged plastic facia
Wall screws included (2 x M3 screws)
Requires back box (not supplied)
VC 20R 100V 20W Volume Control +Relay
CRV
OL04
11 volume positions (10 + off)
Rugged plastic facia
DC 24V relay input for volume restoration
Wall screws included (2 x M3 screws)
Requires back box (not supplied)
VC 40R 100V 40W Volume Control +Relay
CRV
OL05
11 volume positions (10 + off)
Rugged plastic facia
DC 24V relay input for volume restoration
Wall screws included (2 x M3 screws)
Requires back box (not supplied)
VC 60R 100V 60W Volume Control +Relay
CRV
OL06
11 volume positions (10 + off)
Rugged plastic facia
DC 24V relay input for volume restoration
Wall screws included (2 x M3 screws)
Requires back box (not supplied)
PRODUCT
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€273.59
€336.52
€333.61
€410.34
CLEVER ACOUSTICS
CONTROLLERS
VC 1000 100V 1000W 19" Volume Control
CRVOL07
1U 19'' rackmount chassis
5 step attenuation
5 input channels, 5 output channels
Wide frequency response: 100Hz-16KHz
Low distortion, low noise components
Rubber feet for desktop use
VC 1000R 100V 1000W 19" Volume Control
+Relay
CRVOL08
1U 19'' rackmount chassis
5 step attenuation
5 input channels, 5 output channels
24V DC input per channel for volume restoration
Wide frequency response: 100Hz-18KHz
Low distortion, low noise components
Rubber feet for desktop use