PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€32.24
€39.66
€50.66
€62.31
€61.90
€76.14
€67.08
€82.51
€76.65
€94.28
€89.55
€110.14
€93.23
€114.67
DJ EFFECT LIGHTING
Equinox Blaze
EQLED35
Plug and play unit
Sound Activation via built-in microphone
Sound sensitivity control
Light weight and compact metal housing
18 x 5mm LEDs (R: 6, G: 6, B: 6)
Equinox Warp
EQLED36
Plug and play unit
Auto and sound active modes
Sound Activation via built-in microphone
Sound sensitivity control
Light weight and compact metal housing
64 x 5mm LEDs (R: 24, G: 16, B: 24)
Equinox Comet
EQLED29
4 x 3W LEDs (R: 1, G: 1, B: 1, W: 1)
Plug and play unit producing a unique room filling effect
Sound activation via built-in microphone
Sound sensitivity control
Lightweight housing
Equinox Duo
EQLED38
Plug and play unit producing a
unique room filling effect
Auto run function
Sound Activation via built-in microphone
Sound sensitivity control
128 x 5mm LEDs (R: 48, G: 32, B: 48)
Equinox Terminator ll
EQLED31
Plug and play unit producing a
unique room filling effect
4 x 3W LEDs (R: 1, G: 1, B: 1, W: 1)
Sound Activation via built-in microphone
Sound sensitivity control
Robust metal housing
No duty cycle, runs all night
Acme LED Boogie
BOOG01
92 x 5mm LEDs: (R: 32, G: 30, B: 30)
LED dual lens effects with sharp red, green & blue high output colored
beams
Wide beam spread covers a large area
Sound active with built-in programs
High output with new superior optical system
Very low power consumption
Equinox Interceptor
EQLED34
DMX channels :3
5 x 3W RGBWA LEDs
(R: 1, G: 1, B: 1, W: 1, A: 1)
Sound active, master/slave and DMX modes
3-pin XLR in/out sockets
IEC power in/out sockets
Strobe function
3 push button LED display
Long life LEDs
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€109.68
€134.91
€116.14
€142.85
€123.01
€151.30
€125.30
€154.11
€139.77
€171.92
€138.98
€170.95
DJ EFFECT LIGHTING
Equinox Revolution 315x5mm RGBW LED Effect
EQLED80
294 x 5mm LEDs
(42 x white, 84 x red, 84 x green, 84 x blue)
DMX channels: 3
Sound active, auto, built-in programs and master/slave modes
Optional Smart controller
Variable strobe
4 push button menu with LCD display
IEC in/out sockets
3-pin DMX in/out sockets
Equinox Triclops
EQLED50
DMX channels: 8
DMX, auto run, sound active and slave mode
72 x LEDs (R: 24, G: 24, B:24)
3-Pin XLR in/out sockets
No duty cycle, runs all night
Robust metal housing
Fuse: 1 Amp
Equinox Quadzilla
EQLED51
DMX channels: 6
4 operation modes: DMX, Auto Run, Sound active and Master/Slave
mode
Built-in programs can be triggered via built-in microphone
256 x 5mm LEDs (R: 96, G: 64, B:96)
3-Pin XLR In/Out sockets
No duty cycle, runs all night
Robust metal housing
Equinox Dualize
EQLED45
DMX channels: 6
DMX, sound active, auto and master/slave modes
128 x 5mm LEDs (R: 64, G: 40, B:24)
3-pin XLR in/out sockets
Robust metal housing with extruded corners
Fuse: 1 Amp
No duty cycle, runs all night
Equinox Eye Bar
EQLED39
DMX channels: 6
Sound Active, Auto, DMX and Master/Slave modes
256 x 5mm LEDs
(R: 64, G: 64, B: 64, W: 32, A: 32)
Built-in programs and microphone
3-Pin XLR In/Out sockets for DMX
IEC power in/out sockets
No duty cycle, runs all night
Robust metal housing
Equinox Impact Flower 20W COB LED DMX
Gobo Flower
EQLED79
1 x 20W white COB LED
DMX channels: 1, 3 or 5 selectable
Sound activated, auto and master/slave modes
11 solid colour gobos
4 Push button LED digital display
0-100% dimming and variable strobe via DMX
IEC Power in/out sockets
3-pin XLR in/out sockets
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€145.23
€178.63
€150.98
€185.70
€151.79
€186.70
€157.09
€193.22
€165.03
€202.99
€175.91
€216.38
DJ EFFECT LIGHTING
Equinox Power Flower 20W COB LED DMX
Moonflower
EQLED77
1 x 20W white COB LED
DMX channels: 1, 3 or 5 selectable
Sound activated, auto and master/slave modes
Multicolour reflector dish and 11 gobos
4 Push button LED digital display
0-100% dimming and variable strobe via DMX
IEC Power in/out sockets
3-pin XLR in/out sockets
Acme MiracLED
MIRA01
244 x 5mm LEDs (R: 80, G: 60, B: 48, W: 36)
0-100% dimming and variable strobe (via DMX)
DMX channels: 7
Sound active, auto, master/slave and DMX modes
4 push button menu with LED display
3-pin XLR in/out sockets
IEC power in/out sockets
Optional CA-8 controller
Acme Mace Tri Ball
MACE01
6 x 3W RGB LEDs
Coverage: 360 degrees
Adjustable rotation speed
Sound active and automatic modes
Acme LED Stormbird
STOR01
Plug and play unit producing a
unique room filling effect
LED Gobo flower with dichroic prism effect
Equipped with gobo wheel, inner reflector
dish and a 3 facet prism
Sound active, static and continuous rotation functions
Gobo wheel is equipped with 15 gobos
IEC Power in/out sockets
Perfect for discos, clubs, bars and mobile DJ's
Lightweight and robust metal housing
No duty cycle, runs all night
Acme 10 Watt InvincibLED
INVI02
1 x 10W RGBW LED
0-100% dimming and variable strobe (via DMX)
DMX channels: 1 or 3 selectable
Sound activated, Master/Slave and DMX modes
Dipswitches
3-pin XLR in/out sockets
IEC power in/out sockets
Convection cooled
Optional CA-8 controller
Equinox Six Shooter 18x3W LED DMX Effect
EQLED76
18 x 3W LEDs (R:6, G: 6, B: 6)
DMX channels: 1 or 3 selectable
Sound active, auto, DMX and master/slave modes
Built-in programs and microphone
4 push button menu with LED display
IEC power in/out sockets
3-pin XLR in/out sockets
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€188.60
€231.98
€194.14
€238.80
€204.66
€251.74
€204.75
€251.84
€205.03
€252.19
DJ EFFECT LIGHTING
Acme Mirrage
MIRR20
DMX channels: 6
8 x 3W RGBW LEDs
(R: 2, G: 2, B: 2, W: 2)
Sound active, auto, master/slave and DMX modes
IEC power in/out sockets
3-pin XLR in/out sockets
0-100% dimming and strobe effects
Optional CA-8 hand controller
4 push button menu with LED display
Acme ImpossibLED
IMPO01
392 x 5mm LEDs (R: 140, G: 105, B: 84, W: 63)
0-100% dimming and variable strobe (via DMX)
DMX channels: 4 or 10 selectable
Sound active, master/slave and DMX modes
4 push button menu with LED display
3-pin XLR in/out sockets
IEC power in socket
Optional CA-8 controller
Acme Barrage
BARR01
DMX channels: 6
8 x 3W RGBW LEDs (R: 2, G: 2, B:2, W: 2)
Sound active, auto, master/slave and DMX modes
IEC power in/out sockets
3-pin XLR in/out sockets
0-100% dimming and strobe effects
Optional CA-8 hand controller for instant lighting shows at your
fingertips
LED display for easy navigation
Ideal for discos, clubs, bars and mobile DJs etc
Equinox Domin8R (Blemished Stock)
EQLED53
DMX channels: 16
120 x 5mm LEDs (R: 40, G: 40, B: 40)
Sound active, auto, master/slave and DMX modes
IEC power in/out sockets
3-pin XLR in/out sockets
Robust metal housing
Equinox Scantastic 4
EQLED55
DMX channels: 8/12 or 17 selectable
60 x 5mm RGBA LEDs
( R: 16, G: 20, B: 20, A: 4)
Sound active, auto, master/slave and DMX modes
Pan: 180 degrees, Tilt: 90 degrees
IEC power in/out sockets
3-pin XLR in/out sockets
4 push button LED display
Beam angle: 11 degrees
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€194.99
€239.83
€214.14
€263.39
€175.40
€215.74
€187.19
€230.25
DJ EFFECT LIGHTING
Equinox Gobo & Logo Projector 30W COB LED
(Black Housing)
EQLED78
1 x 30W COB LED
Adjustable beam angle: 12° - 28°
1100Hz refresh rate
7880 Lux @ 2m
11 user replaceable, rotating gobos
4 colour filters included
DMX channels: 1 or 3 selectable
Dimming and auto run modes
0-100% dimming and variable strobe
Users can print their own gobos using standard transparency film up to
1mm
Convection cooled
4 push button menu with LED display
IEC power in socket
3-Pin XLR in/out sockets
Equinox Gobo & Logo Projector 30W COB LED
(White Housing)
EQLED78A
1 x 30W COB LED
Adjustable beam angle: 12° - 28°
1100Hz refresh rate
7880 Lux @ 2m
11 user replaceable, rotating gobos
4 colour filters included
DMX channels: 1 or 3 selectable
Dimming and auto run modes
0-100% dimming and variable strobe
Users can print their own gobos using standard transparency film up to
1mm
Convection cooled
4 push button menu with LED display
IEC power in socket
3-Pin XLR in/out sockets
SCANNERS
Acme 250W Dynamo
DYNA01A
Lamp: ELC 24V 250W
Beam angle: 13 degrees
Blackout and variable strobe (via DMX)
10 static multi-coloured gobos + open
DMX channels: 4
Sound active, master/slave and DMX modes
Manual zoom
Dipswitches
3-pin XLR in/out sockets
IEC power in socket
Fan cooled and electronic over heat protection
Optional CA-8 controller
Acme 250W Dynarock
DYNA03
Lamp: ELC 24V 250W
Beam angle: 12 degrees
Blackout and variable strobe (via DMX)
10 static multi-coloured gobos + open
DMX channels: 4
Sound active, master/slave and DMX modes
Manual zoom
Dipswitches
3-pin XLR in/out sockets
IEC power in socket
Fan cooled and electronic over heat protection
Optional CA-8 controller
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€94.84
€116.66
€186.50
€229.40
€183.31
€225.47
€225.75
€277.67
€259.78
€319.53
€250.61
€308.25
SCANNERS
Acme LED Dynamo
DYNA06
52 x 5mm LEDs (R: 16, G: 12, B: 12, W: 12)
Blackout and variable strobe (via DMX)
DMX channels: 4
Sound active, master/slave and DMX modes
Manual zoom
Dipswitches
3-pin XLR in/out sockets
IEC power in socket
Optional CA-8 controller
Equinox Ultra Scan
EQLED75
DMX channels: 8
Sound active, auto, DMX and master/slave modes
1 x 25W LED
Colour wheel: 8 dichroic colours + white
Gobo wheel: 11 Gobos + open
4 Push button LED digital display
Beam angle: 11 degrees
Pan: 180 degrees, Tilt: 90 degrees
0-100% dimming + strobe function
IEC power in socket
3-Pin XLR in/out sockets
Acme Revolver
REVO01
Intelligent barrel effect
DMX channels: 5
1 x 10W Quad colour LED
Sound active, auto, master/slave and DMX modes
3-pin XLR in/out sockets
0-100% dimming
Optional CA-8 or CA-9 hand controller
Ideal for discos, clubs, bars and mobile DJs etc
Acme Dynamic 25 Scan
DYNA09
1 x 25W CREE LED
Beam angle: 14 degrees
Pan: 166 degrees, Tilt: 54 degrees
0-100% dimming and variable strobe via DMX
8 fixed gobo/colour wheel + open
DMX channels: 5
Sound active, auto, master/slave and DMX modes
Optional CA-8 or CA-9 controller
3-pin XLR in/out sockets
IEC power in/out sockets
Acme Dynamic 25 Roller Barrel
DYNA10
1 x 25W CREE LED
0-100% dimming and variable strobe via DMX
8 fixed gobo/colour wheel + open
DMX channels: 5
Sound active, auto, master/slave and DMX modes
Optional CA-8 or CA-9 controller
3-pin XLR in/out sockets
IEC power in/out sockets
Acme Dynamic 25 Spin
DYNA11
1 x 25W CREE LED
0-100% dimming and variable strobe via DMX
8 fixed gobo/colour wheel + open
DMX channels: 4
Sound active, auto, master/slave and DMX modes
Optional CA-8 or CA-9 controller
3-pin XLR in/out sockets
IEC power in/out sockets
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€67.07
€82.50
€137.04
€168.56
€133.63
€164.37
€116.14
€142.85
€354.68
€436.25
WATER & STAR EFFECTS
Acme White Astro
ASTR01
Produces 34 crisp, bright white beams that slowly rotate
LED: 1 x 3W
Beams cover a wide area
Acme RGB DMX Astro
ASTR02
1 x 3W RGB LED
0-100% dimming and variable strobe (via DMX)
DMX channels: 3
Master/Slave, Sound Active and DMX modes
Optional CA-8 controller
Dipswitches
3-pin XLR in/out sockets
Captive power connection
Fan cooled
Acme 10W DMX RGBW Astro
ASTR04
DMX channels: 3 (Dimmer/Strobe, Colour, Rotation)
Built-in programs
Master/Slave, Sound Active and DMX modes
Produces 34 crisp, bright coloured beams
LED: 1 x 10W RGBW (Quad colour)
Pin sharp beams cover a wide area
Fan cooled
Connection: 3-pin XLR
Control: Any universal DMX-512 or CA-8 controller
Acme LED Waterwave
WATE01
1 x 10W White LED
Projects realistic water waves in
ever changing colours
Equipped with 2 glass effect wheels and 1 independent dichroic colour
wheel
6 colours: Orange, Green, Blue, Yellow,
Purple and White
2 operational modes: seamless scrolling colours or single colour
operation
Beam angle: 34 degrees
Supplied with additional 60 degree lens
Adjustable focus
Fan cooled
Long life LED
Acme 50W LED Deluge Waterwave
DELU01
1 x 50W white LED
Beam angle: 34° (optional 60° lens included)
Manual focus
DMX channels: 3
Seamless scrolling colours or single colour modes
0-100% dimming via DMX
4 push button menu with LED display
3-pin XLR in/out sockets
IEC power in/out sockets
Fan cooled
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€350.33
€430.91
€60.73
€74.69
€89.18
€109.69
€168.09
€206.75
€67.85
€83.45
€87.37
€107.47
€195.60
€240.58
WATER & STAR EFFECTS
Acme Colortec 250 Colour Changer
COLO01
1 x 60W LED
Beam angle: 9° (14° lens included)
Colour wheel: 8 dichroic colours + white
DMX channels: 3 or 8 selectable
Sound active and master/slave modes
0 - 100% dimming and variable strobe via DMX
4 push button menu with LED display
IEC power in/out sockets
3-pin XLR in/out sockets
Fan cooled
STROBE / CONTROLLER'S
Equinox SF-80 Strobe
STRO08
Flash rate: 1-18fps
Signal connector: 6.35mm mono jack
Optional control mode: SF-01 CX remote
Fuse: T1A/250V
Equinox SF 300 Strobe
STRO09
Flash rate: 1-18fps
Signal connector: 6.35mm mono jack
Optional control mode: SF-01 CX remote
Fuse: T3.15A/250V
Equinox Blitzer Strobe
STRO02
DMX channels: 2
Sound active, manual, master/slave and DMX modes
1 x Mega Bright 50W LED
3-pin XLR in/out sockets
1/4" Jack in/out sockets (for analogue controller)
3 push button LED display
Flash rate: 1 - 12fps
Wildzap 1500 Watt Strobe
STRO10
Adjustable flash rate
Adjustable intensity rate
0 - 100% Dimmable
1 - 12 flashes per second
Equinox Firecracker 1500W DMX Strobe
STRO12
1500W strobe light
1-15 flashes per second
Adjustable intensity rate
DMX channels: 2
Stand alone and sound active modes
Link up to 16 units together via the Equinox Strobe Command Strobe
Remote (Order ref: STRO07)
0-100% dimmable
Note: Will NOT operate as master/slave
Equinox Lightning Cracker 2 Strobe
STRO20
DMX channels: 2
6 x 10W White Linear LEDs
Adjustable flash and intensity rate
Flash rate range of 1 - 10 Fps
Adjustable hanging bracket
3-pin XLR in/out sockets
Analogue remote in/out sockets
3 push button menu with LED display
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€247.52
€304.45
€369.94
€455.03
€27.89
€34.30
€97.49
€119.92
€139.67
€171.79
€216.79
€266.65
STROBE / CONTROLLER'S
Equinox Lightning Strike 448 x SMD LED Strobe
STRO21
448 x SMD white LEDs (7000K)
Beam angle: 160°
This unit can act as a pure white wash or a high intensity strobe
The LEDs are split across 4 blocks allowing chase patterns to be
created
DMX channels: 1/4/6 and 7 selectable
Static, sound active, auto and master/slave modes
0-100% dimming and variable strobe
4 push button menu with LED display
IEC power in/out sockets
3-pin XLR in/out sockets
Convection cooled
eLumen8 ATOM 3000 Strobe
STRO22
3000W strobe light
Adjustable intensity
Adjustable flash rate
DMX channels: 1/2/3 and 4 selectable
Blinder function with auto fade down
0-100% dimming and variable strobe
4 push button menu with LED display
5-pin XLR in/out sockets
3-pin XLR in/out sockets
Resettable 30A breaker
Equinox SF 01CX Strobe Remote
STRO15
Output Signal: 10V DC
Speed control
On/Off switch
Manual trigger
Connectors: 1/4" mono jack socket
Maximum Load: 4 Strobes
Fuse: 0.5A
Equinox Strobe Command Strobe Remote
STRO07
4 channel
Analogue and DMX outputs
Auto and sound active modes
10 built-in chase patterns
Single flash, full on and blackout
Adjustable chase speed
Adjustable dimmer (DMX only)
Built-in microphone
UV PRODUCTS
400W UV CANNON
UV01
Lamp: LAMP64 (not included)
400W Super High output Black light
Ideal for large venues
Comes with Hanging Bracket.
Protective front grill
STAGEWASH UV (18 X 1 WATT)
LEDJ-105
18 x 1W ultra violet LEDs
Beam angle: 30°
DMX channels: 2
Sound active, auto and master/slave modes
Dipswitches
0-100% dimming and variable strobe
3-pin XLR in/out sockets
IEC power in/out sockets
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€317.84
€390.95
€130.13
€160.06
€87.44
€107.55
€141.53
€174.08
€143.12
€176.04
€51.80
€63.72
UV PRODUCTS
STAGEWASH UV (36 X 1 WATT)
LEDJ-106
36 x 1W ultra violet LEDs
Beam angle: 30°
DMX channels: 2
Sound active, auto and master/slave modes
0-100% dimming and variable strobe
4 push button menu with LED display
3-pin XLR in/out sockets
Captive power connection
Fan cooled
STRATOS UV
LEDJ-66
336 x 10mm ultra violet LEDs
Beam angle: 40°
DMX channels: 2
Sound active and master/slave modes
Dipswitches
0-100% dimming via DMX
3-pin XLR in/out sockets
IEC power in/out sockets
STAGE LIGHTING
Acme 10W LED White Pinspot
PARC37
1 x 10W white LED
Beam angle: 9° (13° lens included)
Compact lightweight case design
Internal electronic transformer
Low heat output and power consumption
Acme 10W DMX LED White Pinspot
PARC36
1 x 10W white LED
Beam angle: 9° (13° lens included)
DMX channels: 1 or 2 selectable
Sound active and master/slave mode
Lightweight case design
Internal electronic transformer
Low heat output and power consumption
Optional CA-8 or CA-9
Acme 10W Quad Colour DMX LED Pinspot
PARC39
1 x 10W CREE quad-colour LED
Beam angle: 9° (13° lens included)
DMX channels: 4
Sound active and master/slave modes
Lightweight case design
Internal electronic transformer
Low heat output and power consumption
Optional CA-8 or CA-9
LEDJ Eco LED 56 Can Black
LEDJ06
151 x 5mm LEDs (R: 51, G: 49, B: 51)
Beam angle: 25 degrees
0 - 100% dimming and variable strobe via DMX
DMX channels: 3 or 6 selectable
Static colour, colour change, colour fade, auto,
sound active, master/slave and DMX
3 push button menu with LED display
Captive power supply
3-pin XLR in/out sockets
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€48.35
€59.47
€79.94
€98.32
€79.94
€98.32
€192.30
€236.52
€192.29
€236.51
STAGE LIGHTING
LEDJ Eco LED 56 Can Polished
LEDJ07
151 x 5mm LEDs (R: 51, G: 49, B: 51)
Beam angle: 25 degrees
0 - 100% dimming and variable strobe via DMX
DMX channels: 3 or 6 selectable
Static colour, colour change, colour fade, auto,
sound active, master/slave and DMX
3 push button menu with LED display
Captive power supply
3-pin XLR in/out sockets
LEDJ LED-64 Floor Can Black
LEDJ36
183 x 10mm LEDs (R: 60, G: 60, B: 63)
Beam angle: 25°
DMX channels: 4
Static colour, auto, sound active and master/slave modes
0-100% dimming and variable strobe via DMX
Dipswitches
3-pin XLR in/out sockets
Captive power connection
Bracket allows for multiple rigging or floor standing applications
LEDJ LED-64 Floor Can Polished
LEDJ37
183 x 10mm LEDs (R: 60, G: 60, B: 63)
Beam angle: 25°
DMX channels: 4
Static colour, auto, sound active and master/slave modes
0-100% dimming and variable strobe via DMX
Dipswitches
3-pin XLR in/out sockets
Captive power connection
Bracket allows for multiple rigging or floor standing applications
LEDJ Stage Par 64 Black (36 x 1W RGB)
LEDJ42
36 x 1W LEDs (R: 12, G: 12, B: 12)
Beam angle: 15 degrees
0-100% dimming and variable strobe
DMX channels: 3 or 6 selectable
Static colour, colour change, colour fade, auto, sound active,
master/slave and DMX modes
3 push button menu with LED display
3-pin XLR in/out sockets
Captive power connection
Fan cooled
See Resources Tab for Lumen Chart
LEDJ Stage Par 64 Polished (36 x 1W RGB)
LEDJ43
36 x 1W LEDs (R: 12, G: 12, B: 12)
Beam angle: 15 degrees
0-100% dimming and variable strobe
DMX channels: 3 or 6 selectable
Static colour, colour change, colour fade, auto, sound active,
master/slave and DMX modes
3 push button menu with LED display
3-pin XLR in/out sockets
Captive power connection
Fan cooled
See Resources Tab for Lumen Chart
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€311.79
€383.51
€311.79
€383.51
€189.94
€233.63
€128.27
€157.77
€165.45
€203.50
STAGE LIGHTING
LEDJ Stage Par 64 Black (36 x 3W RGB)
LEDJ44
36 x 3W LEDs (R: 12, G: 12, B: 12)
Beam angle: 15 degrees
0-100% dimming and variable strobe
DMX channels: 3 or 6 selectable
Static colour, colour change, colour fade, auto, sound active,
master/slave and DMX modes
3 push button menu with LED display
3-pin XLR in/out sockets
Captive power connection
Fan cooled
See Resources Tab for Lumen Chart
LEDJ Stage Par 64 Polished (36 x 3W RGB)
LEDJ45
36 x 3W LEDs (R: 12, G: 12, B: 12)
Beam angle: 15 degrees
0-100% dimming and variable strobe
DMX channels: 3 or 6 selectable
Static colour, colour change, colour fade, auto, sound active,
master/slave and DMX modes
3 push button menu with LED display
3-pin XLR in/out sockets
Captive power connection
Fan cooled
See Resources Tab for Lumen Chart
LEDJ Stage Tri Par 64 Black (18 x 3W Tri)
LEDJ48
18 x 3W tri-colour LEDs
Beam angle: 25°
400Hz refresh rate
DMX channels: 3 or 6 selectable
Static colour, colour fade, sound active, auto and master/slave modes
0-100% dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LED display
3-pin XLR in/out sockets
Captive power connection
Fan cooled
LEDJ Performer 36 RGB
LEDJ251
36 x 3W LEDs (R: 12, G: 12: B: 12)
Beam angle: 25°
DMX channels: 3 or 7 selectable
Static colour, change, fade, auto, sound active and master/slave modes
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LED display
3-Pin XLR in/out sockets
Captive power connection
Fan cooled
LEDJ Performer 54 RGBW
LEDJ250
54 x 3W RGBW LEDs (R: 12, G: 18, B: 18, W: 6)
Beam angle: 25°
DMX channels: 4 or 8 selectable
Static colour, change, fade, auto, sound active and master/slave modes
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LED display
3-Pin XLR in/out sockets
Captive power connection
Fan cooled
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€184.04
€226.37
€184.07
€226.41
€27.89
€34.30
€241.38
€296.90
€220.90
€271.71
STAGE LIGHTING
LEDJ Performer 18 Quad
LEDJ252
18 x 8W quad-colour LEDs
Beam angle: 40°
DMX channels: 4 or 8 selectable
Static colour, change, fade, auto, sound active and master/slave modes
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LED display
3-Pin XLR in/out sockets
Captive power connection
Fan cooled
LEDJ Intense 12D4 CW/WW LED Slim Par
LEDJ253
12 x 4W CW/WW LEDs
Beam angle: 28°
3000Hz refresh rate
DMX channels: 2 or 4 selectable
Built-in programs, auto and master/slave modes
0 - 100% dimming with variable strobe
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LED display
IEC power in/out sockets
3-Pin XLR in/out sockets
Convection cooled
Optional Barn Door/Gel Frame (LEDJ253A)
LEDJ Intense Barn Door / Gel Frame
LEDJ253A
1 x barn door
1 x gel frame holder
Set of screws for attaching the barn door and gel frame to unit
LEDJ Intense 9P10 RGBAW LED Slim Par
LEDJ254
9 x 10W five-colour LEDs
Beam angle: 25°
3000Hz refresh rate
DMX channels: 5/7 or 9 selectable
Static colour, colour change, colour fade, auto, sound active and
master/slave modes
0-100 dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LED display
IEC power in/out sockets
3-Pin XLR in/out sockets
Convection cooled
Optional Barn Door/Gel Frame (LEDJ253A)
LEDJ Intense 19T3 RGB LED Slim Par
LEDJ255
19 x 3W tri-colour LEDs
Beam angle: 28°
4000Hz refresh rate
Rainbow/pixel effect
DMX channels: 3/6/9 or 11 selectable
Static colour, colour change, colour fade, auto, sound active and
master/slave modes
0-100 dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LED display
IEC power in/out sockets
3-Pin XLR in/out sockets
Convection cooled
Optional Barn Door/Gel Frame (LEDJ253A)
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€89.79
€110.44
€213.79
€262.96
€185.30
€227.92
€262.22
€322.53
STAGE LIGHTING
LEDJ Slimline 229 IR
LEDJ51
229 x10mm LEDs (R: 36, G: 63, B: 61, A: 69)
Beam angle: 25 degrees
400Hz refresh rate
0-100% dimming and variable strobe
DMX channels: 2/3/4 or 7 selectable
Static colour, colour change, colour fade, auto, slave, sound active and
DMX modes
Optional I.R. remote (LEDJ90C)
4 push button menu with LED display
3-pin XLR in/out sockets
IEC power in/out sockets
Convection cooled
LEDJ Slimline 9Q8
LEDJ53
9 x 8W quad-colour LEDs
Beam angle: 25°
400Hz refresh rate
DMX channels: 2/3/4 or 7 selectable
Static colour, colour change, colour fade, sound active and
master/slave modes
0-100% dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LED display
3-pin XLR in/out sockets
IEC power in/out sockets
Fan cooled
LEDJ Slimline 36 RGBA (1W)
LEDJ54
36 x 1W RGBA LEDs (R: 9, G: 9, B: 9, A: 9)
Beam angle: 25°
400Hz refresh rate
DMX channels: 2/3/4 or 7 selectable
Static colour, colour change, colour fade, sound active and
master/slave modes
0-100% dimming and variable strobe
Bracket allows for multiple rigging and floor standing applications
4 push button menu with LED display
3-pin XLR in/out sockets
IEC power in/out sockets
Fan cooled
LEDJ Slimline 36 RGBW (3W)
LEDJ55
36 x 3W RGBW LEDs (R: 9, G: 9, B: 9, W: 9)
Beam angle: 25°
400Hz refresh rate
DMX channels: 2/3/4 or 7 selectable
Static colour, colour change, colour fade, sound active and
master/slave modes
0-100% dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LED display
3-pin XLR in/out sockets
IEC power in/out sockets
Fan cooled
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€117.42
€144.43
€117.42
€144.43
€96.70
€118.94
€96.70
€118.94
STAGE LIGHTING
LEDJ Slimline 1T36
LEDJ57
1 x 36W tri-colour COB LED
Beam angle: 60°
1100Hz refresh rate
0 - 100% dimming with variable strobe
DMX channels: 3 or 5 selectable
Static colour, colour change, colour fade, auto run, sound active and
master/slave modes
4 push button menu with LED display
Optional IR remote (LEDJ90B)
3-pin XLR in/out sockets
IEC Power in/out sockets
Convection cooled
Bracket allows for multiple rigging and floor standing applications
LEDJ Slimline 1T36 (White Housing)
LEDJ57A
1 x 36W tri-colour COB LED
Beam angle: 60°
1100Hz refresh rate
0 - 100% dimming with variable strobe
DMX channels: 3 or 5 selectable
Static colour, colour change, colour fade, auto run, sound active and
master/slave modes
4 push button menu with LED display
Optional IR remote (LEDJ90B)
3-pin XLR in/out sockets
IEC Power in/out sockets
Convection cooled
Bracket allows for multiple rigging and floor standing applications
LEDJ Slimline 5Q5 RGBW
LEDJ58
5 x 5W quad-colour LEDs (RGBW)
Beam angle: 25°
400Hz refresh rate
0 - 100% dimming with variable strobe
DMX channels: 2/3/4 or 7 selectable
Static colour, colour change, colour fade, auto run, sound active and
master/slave amodes
4 push button menu with LED display
Optional IR remote (LEDJ90C)
3-pin XLR in/out sockets
IEC Power in/out sockets
Convection cooled
Bracket allows for multiple rigging and floor standing applications
See Resources Tab for Lumen Chart
LEDJ Slimline 5Q5 RGBW (White Housing)
LEDJ58A
5 x 5W quad-colour LEDs (RGBW)
Beam angle: 25°
400Hz refresh rate
0 - 100% dimming with variable strobe
DMX channels: 2/3/4 or 7 selectable
Static colour, colour change, colour fade, auto run, sound active and
master/slave modes
4 push button menu with LED display
Optional IR remote (LEDJ90C)
3-pin XLR in/out sockets
IEC Power in/out sockets
Convection cooled
Bracket allows for multiple rigging and floor standing applications
See Resources Tab for Lumen Chart
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€107.06
€131.68
€107.12
€131.76
€107.06
€131.68
€107.06
€131.68
STAGE LIGHTING
LEDJ Slimline 7Q5 RGBW
LEDJ59
7 x 5W quad-colour LEDs (RGBW)
Beam angle: 25°
400Hz refresh rate
DMX channels: 2/3/4 or 7 selectable
Static colour, colour change, colour fade, auto run, sound active and
master/slave modes
0 - 100% dimming with variable strobe
Bracket allows for multiple rigging or floor standing applications
Recessed rear control panel to sit flat on the floor for uplighting
4 push button menu with LED display
3-pin XLR in/out sockets
IEC Power in/out sockets
Side entry XLR & power connections
Convection cooled
Optional IR remote (LEDJ90C)
LEDJ Slimline 7Q5 RGBW (White Housing)
LEDJ59A
7 x 5W quad-colour LEDs (RGBW)
Beam angle: 25°
400Hz refresh rate
DMX channels: 2/3/4 or 7 selectable
Static colour, colour change, colour fade, auto run, sound active and
master/slave modes
0 - 100% dimming with variable strobe
Bracket allows for multiple rigging or floor standing applications
Recessed rear control panel to sit flat on the floor for uplighting
4 push button menu with LED display
3-pin XLR in/out sockets
IEC Power in/out sockets
Side entry XLR & power connections
Convection cooled
Optional IR remote (LEDJ90C)
LEDJ Slimline 7Q5 RGBA (Black Housing)
LEDJ59B
7 x 5W quad-colour LEDs (RGBA)
Beam angle: 25°
400Hz refresh rate
DMX channels: 2/3/4 or 7 selectable
Static colour, colour change, colour fade, auto, sound active and
master/slave modes
0-100% dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
Recessed rear control panel allows panel to sit flat on the floor for
uplighting
4 push button menu with LED display
IEC power in/out sockets
3-pin XLR in/out sockets
Side entry XLR & power connections
Convection cooled
Optional IR remote (LEDJ90C)
LEDJ Slimline 7Q5 RGBA (White Housing)
LEDJ59C
7 x 5W quad-colour LEDs (RGBA)
Beam angle: 25°
400Hz refresh rate
DMX channels: 2/3/4 or 7 selectable
Static colour, colour change, colour fade, auto, sound active and
master/slave modes
0-100% dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
Recessed rear control panel to sit flat on the floor for uplighting
4 push button menu with LED display
IEC power in/out sockets
3-pin XLR in/out sockets
Side entry XLR & power connections
Convection cooled
Optional IR remote (LEDJ90C)
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€162.33
€199.67
€162.33
€199.67
€110.53
€135.95
€110.53
€135.95
STAGE LIGHTING
LEDJ Slimline 7HEX6 (Black Housing)
LEDJ60
7 x 6W 6-in-1 colour LEDs (RGBAWUV)
Beam angle: 30°
400Hz refresh rate
DMX channels: 2/3/3/6 or 9 selectable
Static colour, colour change, colour fade, auto, sound active and
master/slave modes
0-100% dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
Recessed rear control panel to sit flat on the floor for uplighting
4 push button menu with LED display
IEC power in/out sockets
3-pin XLR in/out sockets
Side entry XLR & power connections
Convection cooled
Optional IR remote (LEDJ90F)
LEDJ Slimline 7HEX6 (White Housing)
LEDJ60A
7 x 6W 6-in-1 colour LEDs (RGBAWUV)
Beam angle: 30°
400Hz refresh rate
DMX channels: 2/3/3/6 or 9 selectable
Static colour, colour change, colour fade, auto, sound active and
master/slave modes
0-100% dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
Recessed rear control panel allows panel to sit flat on the floor for
uplighting
4 push button menu with LED display
IEC power in/out sockets
3-pin XLR in/out sockets
Side entry XLR & power connections
Convection cooled
Optional IR remote (LEDJ90F)
LEDJ Slimline 1CW20 (Black Housing)
LEDJ61
1 x 20W cool white COB LED
Interchangeable beam angle: 25°or 80°
3000Hz refresh rate
DMX channels: 1 or 2 selectable
Static colour, colour change, colour fade, auto run,
sound active and master/slave modes
0 - 100% dimming with variable strobe
Bracket allows for multiple rigging or floor standing applications
Recessed rear control panel allows panel to sit flat on the floor for
uplighting
4 push button menu with LED display
3-pin XLR in/out sockets
IEC Power in/out sockets
Side entry XLR & power connections
Convection cooled
Optional IR remote (LEDJ90E)
LEDJ Slimline 1CW20 (White Housing)
LEDJ61A
1 x 20W cool white COB LED
Interchangeable beam angle: 25°or 80°
3000Hz refresh rate
DMX channels: 1 or 2 selectable
Static colour, colour change, colour fade, auto run,
sound active and master/slave modes
0 - 100% dimming with variable strobe
Bracket allows for multiple rigging or floor standing applications
Recessed rear control panel to sit flat on the floor for uplighting
4 push button menu with LED display
3-pin XLR in/out sockets
IEC Power in/out sockets
Side entry XLR & power connections
Convection cooled
Optional IR remote (LEDJ90E)
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€110.53
€135.95
€110.53
€135.95
€128.27
€157.77
€175.73
€216.15
STAGE LIGHTING
LEDJ Slimline 1WW20 (Black Housing)
LEDJ62
1 x 20W warm white COB LED
Interchangeable beam angle: 25°or 80°
3000Hz refresh rate
DMX channels: 1 or 2 selectable
Static colour, colour change, colour fade, auto run,
sound active and master/slave modes
0 - 100% dimming with variable strobe
Bracket allows for multiple rigging or floor standing applications
Recessed rear control panel to sit flat on the floor for uplighting
4 push button menu with LED display
3-pin XLR in/out sockets
IEC Power in/out sockets
Side entry XLR & power connections
Convection cooled
Optional IR remote (LEDJ90E)
LEDJ Slimline 1WW20 (White Housing)
LEDJ62A
1 x 20W warm white COB LED
Interchangeable beam angle: 25°or 80°
3000Hz refresh rate
DMX channels: 1 or 2 selectable
Static colour, colour change, colour fade, auto run,
sound active and master/slave modes
0 - 100% dimming with variable strobe
Bracket allows for multiple rigging or floor standing applications
Recessed rear control panel allows panel to sit flat on the floor for
uplighting
4 push button menu with LED display
3-pin XLR in/out sockets
IEC Power in/out sockets
Side entry XLR & power connections
Convection cooled
Optional IR remote (LEDJ90E)
LEDJ Stratos Wash
LEDJ64
336 x 10mm LEDs (R: 108, G: 108, B: 120)
Beam angle: 120 degrees
0 - 100% dimming and variable strobe via DMX
DMX channels: 3 or 6 selectable
Static colour, colour change, colour fade, Sound active, master/slave
and DMX
3 push button menu with LED display
IEC power in/out sockets
3-pin XLR in/out sockets
See Resources Tab for Lumen Chart
LEDJ Omni Tri 9 (Black Housing)
LEDJ150
9 x 9W tri-colour LEDs
Beam angle: 25°
400Hz refresh rate
0-100% dimming and variable strobe
DMX channels: 6
Static colour, colour change, colour fade, sound active and
master/slave modes
4 push button menu with LED display
Barn doors with 360° rotation included
IEC power in/out sockets
3-pin XLR in/out sockets
Fan cooled
Bracket allows for multiple rigging and floor standing applications
See Resources Tab for Lumen Chart
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€314.17
€386.43
€224.48
€276.11
€384.59
€473.05
€238.38
€293.21
€101.71
€125.10
STAGE LIGHTING
LEDJ Q Colour
LEDJ210
18 x 8W quad-colour LEDs (RGBW)
Beam angle: 25°
400Hz refresh rate
DMX channels: 4 or 6 selectable
Static colour, colour mix, colour change, colour fade, auto, sound active
and master/slave modes
0-100% dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
3 push button menu with LED display
IEC power in/out sockets
3-pin XLR in/out sockets
Fan cooled
LEDJ Stage Colour Quad
LEDJ107
9 x 8W quad-colour LEDs
Beam angle: 25°
400Hz refresh rate
DMX channels: 4/6/12 or 15 selectable
Static colour, colour mix, colour change, colour fade, auto, sound active
and master/slave modes
0-100% dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LED display
IEC power in/out sockets
3-pin XLR in/out sockets
Convection cooled
LEDJ Stage Colour 24 Tri
LEDJ108
24 x 3W tri-colour LEDs
Beam angle: 25°
400Hz refresh rate
DMX channels: 6/9/12/18 or 21 selectable
Static colour, colour mix, colour change, colour fade, auto, sound active
and master/slave modes
0-100% dimming and variable strobe via DMX
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LCD display
3-pin XLR in/out sockets
5-pin XLR footswitch socket
IEC power in socket
Convection cooled
LEDJ Stage Wash 36
LEDJ102
36 x 1W LEDs (R: 12, G: 12, B: 12)
Beam angle: 30 degrees
400Hz refresh rate
0-100% dimming and variable strobe (via DMX)
DMX channels: 3 or 6 selectable
Static colour, colour change, colour fade, auto, sound active,
master/slave and DMX modes
3 push button menu with LED display
3-pin XLR in/out sockets
Captive power connection
Fan cooled
See Resources Tab for Lumen Chart
LEDJ Mini Bar RGB
LEDJ161
12 x 1W LEDs (R: 4, G: 4, B: 4)
Beam angle: 25 degrees
0 - 100% dimming via DMX
DMX channels: 3 or 6 selectable
Sound active, auto run, master/slave and DMX
3 push button menu with LED display
3-pin XLR in/out sockets
Captive power supply
See Resources Tab for Lumen Chart
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€158.02
€194.36
€201.20
€247.48
€201.20
€247.48
€352.26
€433.28
€414.42
€509.74
STAGE LIGHTING
LEDJ Light Brick - 12x3W Tri Colour
LEDJ162
12 x 3W tri-colour LEDs
Beam angle: 30°
DMX channels: 3/7/10/12 or 16 selectable
Sound active and master/slave modes
0-100% dimming and variable strobe via DMX
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LED display
IEC power in/out sockets
3-pin XLR in/out sockets
Fan cooled
LEDJ Omni WA 36 (Black Housing)
LEDJ151
36 x 3W LEDs (W: 24, A: 12)
Beam angle: 30°
400Hz refresh rate
0-100% dimming and variable strobe
DMX channels: 5
Auto, dimming and master/slave modes
4 push button menu with LCD display
Barn doors with 360° rotation included
IEC power in/out sockets
3-pin XLR in/out sockets
Fan cooled
See Resources Tab for Lumen Chart
LEDJ Omni WA 36 (White Housing)
LEDJ152
36 x 3W LEDs (W: 24, A: 12)
Beam angle: 30°
400Hz refresh rate
DMX channels: 5
Auto, dimming and master/slave modes
0-100% dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LCD display
Barn doors with 360° rotation included
IEC power in/out sockets
3-pin XLR in/out sockets
Fan cooled
Equinox Maxi Bar System
EQLED62
432 x 10mm LEDs (R: 144, G: 144, B: 144)
Beam angle: 30°
DMX channels: 6/9 or 15 selectable
0-100% dimming and variable strobe via DMX
Individual tilt and swivel on each panel
IEC power in/out sockets
3-pin XLR in/out sockets for DMX
5-pin socket for included foot controller (MB-1)
Linkable - connect multiple kits to one controller
Height adjustable stand
All metal design
Equinox Mega Bar System
EQLED63
28 x 3W tri-colour LEDs
Beam angle: 25°
DMX channels: 6/9 or 15 selectable
0-100% dimming and variable strobe via DMX
Individual tilt and swivel on each panel
IEC power in/out sockets
3-pin XLR in/out sockets for DMX
5-pin socket for included foot controller (MB-1)
Linkable - connect multiple kits to one controller
Height adjustable stand
All metal design
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€687.25
€845.31
€414.42
€509.74
€345.87
€425.42
€109.68
€134.91
STAGE LIGHTING
Equinox Mighty Bar System
EQLED64
28 x 8W quad-colour LEDs
Beam angle: 25°
DMX channels: 4/6/9/16 or 19 selectable
Sound active, built-in programs, auto and master/slave modes
Infra-red operation (remote included)
14 built-in programs
0-100% dimming and variable strobe via DMX
Individual tilt and swivel on each panel
4 push button menu with LCD digital display
3-pin XLR in/out sockets for DMX
5-pin socket for included foot controller (MB-1)
PowerCON in/out sockets
2 x IEC power out sockets (switchable via IR remote)
Height adjustable stand
All metal design
Equinox Giga Bar System
EQLED65
4 x 30W tri-colour COB LEDs
Interchangeable beam angle: 25°or 90°
DMX channels: 3/4/5/6/7/8/12 or 17 selectable
Sound active, built-in programs, auto and master/slave modes
Infra-red operation (remote included)
14 built-in programs
0-100% dimming and variable strobe via DMX
Individual tilt and swivel on each panel
4 push button menu with LCD digital display
3-pin XLR in/out sockets for DMX
5-pin socket for included foot controller (GB-1)
IEC in/out sockets
2 x IEC power out sockets (switchable via IR remote or foot controller
for effects switching)
Height adjustable stand
All metal design
LEDJ Q Pix Batten
LEDJ97
16 x 10W Quad colour LEDs (only controllable in pairs)
Beam angle: 30 degrees
0-100% dimming and variable strobe
DMX channels: 4, 6, 10, 18, 32 or 34 selectable
Static colour, sound active, auto, master/slave and DMX modes
4 Push button menu with LED display
IEC power in/out sockets
3-Pin XLR in/out sockets
Fan cooled
See Resources Tab for Lumen Chart
LEDJ RGB Spectra Batten (LED Display, White Case)
LEDJ75A
252 X 10mm LEDs (R: 108, G: 72, B: 72)
Beam angle: 40°
DMX channels: 3 or 9 selectable
Sound active, auto and master/slave modes
0-100% dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LED display
IEC power in/out sockets
3-pin XLR in/out sockets
Optional IR remote (LEDJ90B)
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€109.68
€134.91
€7.44
€9.15
€7.44
€9.15
€135.08
€166.15
€135.08
€166.15
€144.65
€177.92
STAGE LIGHTING
LEDJ RGB Spectra Batten (LED Display, Black Case)
LEDJ95
252 X 10mm LEDs (R: 108, G: 72, B: 72)
Beam angle: 40°
DMX channels: 3 or 9 selectable
Sound active, auto and master/slave modes
0-100% dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LED display
IEC power in/out sockets
3-pin XLR in/out sockets
Optional IR remote (LEDJ90B)
LEDJ Spectra Batten Aluminium End Cap Black
LEDJ95A
Black aluminium end cap for use with the LEDJ RGB Spectra Batten
(LEDJ95).
LEDJ95B
White aluminium end cap for use with the LEDJ RGB Spectra Batten
(LEDJ75A).
LEDJ Spectra Batten Aluminium End Cap White
LEDJ RGBA Spectra Batten (LCD Display, Black
Case)
LEDJ96
252 x 10mm RGBA LEDs (R: 48, G: 72, B: 72, A: 60)
Beam angle: 40°
DMX channels: 2/3/4/6/7 or 19 selectable
Static colour, sound active, auto and master/slave modes
0-100% dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LCD display
IEC power in/out sockets
3-pin XLR in/out sockets
Convection cooled
Optional IR remote (LEDJ90C)
LEDJ RGBA Spectra Batten (LCD Display, White
Case)
LEDJ96A
252 x 10mm RGBA LEDs (R: 48, G: 72, B: 72, A: 60)
Beam angle: 40°
DMX channels: 2/3/4/6/7 or 19 selectable
Static colour, sound active, auto and master/slave modes
0-100% dimming and variable strobe
Bracket allows for multiple rigging or floor standing applications
4 push button menu with LCD display
IEC power in/out sockets
3-pin XLR in/out sockets
Convection cooled
Optional IR remote (LEDJ90C)
LEDJ Octoblox
LEDJ94
DMX channels: 3/5/8/14/24 or 26 selectable
384 x 5mm LEDs (R: 128, G: 128, B: 128)
DMX, auto run, DMX channel selection, preset colour, sound active and
slave modes
3-Pin XLR in/out for DMX
IEC power in/out sockets
4 push button menu with LED display
Built-in microphone
Mounting brackets
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€213.79
€262.96
€244.50
€300.73
€720.85
€886.65
€490.09
€602.81
€1,671.56
€2,056.01
STAGE LIGHTING
LEDJ Pixel Bar
LEDJ73A
504 x 5mm LEDs (R: 168, G: 168, B:168)
Beam angle: 25 degrees
0-100% dimming and variable strobe (via DMX)
DMX channels: 6/9/15/24 or 27 selectable
Static colour, auto, sound active, master/slave and DMX modes
4 push button menu with LCD display
3-pin XLR in/out sockets
IEC power in/out sockets
eLumen8 Versa Bar
ELUM075
1 x PowerCON input socket
1 x PowerCON through socket
1 x 3-pin & 5-pin XLR input socket
1 x 3-pin & 5-pin XLR through socket
4 zones each comprising; Adjustable position fixture point, IEC &
PowerCON output sockets, 3-pin & 5-pin XLR output sockets
100% electrical isolation between all inputs/outputs
Each DMX output features an ind. driver with DATA indicator
Fused input and outputs
28mm spigot
2 adjustable hanging and safety points
Max. load: 40kg
Acme FS 575 Followspot
FOLL05
Lamp: NSD 575/2
Adjustable beam angle: 13° - 19°
Manual focus
Blackout
Manual iris
Single gobo slot
Coloured levers for identification
Three positioning handles
Captive power connection
Fan cooled
High quality optics
Thermal switch
Acme FS 1000 Followspot
FOLL06
Lamp: FVA 240V 1000W
Adjustable beam angle: 13° - 19°
Manual focus
Blackout
Manual iris
Single gobo slot
Coloured levers for identification
Three positioning handles
Captive power connection
Fan cooled
High quality optics
Thermal switch
iSolution iFollow HMI 1200 Followspot
FOLL02
Lamp: HMI 1200W
Beam angle: 13°
Remote focus
Independent shutter
3 colour correction filters + open (2300K, 5600K and 6000K)
Colour wheel: 8 dichroic colours + white
Rainbow effect in both directions
DMX channels: 6
On board controls include: 9 hold colour buttons and sliders for iris,
colour temperature, dimmer and focus
0-100% dimming and variable strobe speed
4 push button menu with LED display
5-pin XLR in/out sockets
Captive power connection
Fan cooled
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€139.43
€171.49
€320.50
€394.22
€339.94
€418.13
€102.25
€125.76
€27.89
€34.30
€464.75
€571.64
€18.59
€22.87
STAGE LIGHTING
Acme Follow Spot Stand
STAN04
Steel construction
Silver finish
Accepts 28mm spigot (spigot included)
Acme IF-1200/ IF-575 Flight Case With Wheels
CASE118
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Heavy duty interlocking ball corners for added impact protection & to
enable safe, secure stacking
Holds 1 x iFollow 575 / iFollow 1200
STANDARD STAR CLOTH SYSTEMS
LEDJ 3 x 2M White Star Cloth System with Stand &
Bag Set
STAR01
Cloth
100 x 5mm white LEDs
System includes: one 3 x 2m LED starcloth, one controller, tripod
stands, T-bars and heavy duty carry bag
The bag can also hold the supplied 3 x 2m starcloth and controller.
Hanging tabs on 3 sides
Fire retardant material
Controller
All on, sound active and chase modes
LEDJ 3 x 2M Stand and Bag Set
STAR01A
STAR01B
Black annodised finish stands
No plastic parts
Fully adjustable legs
Spring damper in base
LEDJ 3x2/6x3M Stand Set Replacement Bag
Replacement bag for LEDJ 3 x 2 or 6 x 3m Stand sets.
LEDJ 6 x 3M Star Cloth System
STAR03
STAR03B
Cloth
200 x 5mm white LEDs
System includes: one 6 x 3m LED starcloth, one controller and heavy
duty carry bag
Hanging tabs on 3 sides
Fire retardant material
Controller
All on, sound active and chase modes
LEDJ STAR03/07 Replacement Bag
Replacement bag for STAR03 or STAR07.
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€260.13
€319.96
€18.59
€22.87
€529.82
€651.67
€892.32
€1,097.55
€18.59
€22.87
€175.73
€216.15
€301.46
€370.80
STANDARD STAR CLOTH SYSTEMS
LEDJ 3 x 2M Starcloth System
STAR05
STAR05B
Cloth
100 x 5mm white LEDs
System includes: one 3 x 2m LED starcloth, one controller and heavy
duty carry bag
Hanging tabs on 3 sides
Fire retardant material
Controller
All on, sound active and chase modes
LEDJ STAR05/05A/15/16 Replacement Bag
Replacement bag for STAR05, STAR05A, STAR15 or STAR16.
LEDJ DMX 6 x 3M Starcloth System
STAR07
Cloth
200 x 5mm white LEDs
System includes: one 6 x 3m LED starcloth, one controller and heavy
duty carry bag
Hanging tabs on 3 sides
Fire retardant material
Controller
DMX channels: 5
All on, sound active and chase mode
LEDJ DMX 8 x 4.5M Starcloth System
STAR06
STAR06B
Cloth
Over 300 5mm white LEDs
System includes: one 8 x 4.5m LED starcloth, one controller and heavy
duty carry bag
Hanging tabs on 3 sides
Fire retardant material
Controller
DMX channels: 5
All on, sound active and chase modes
LEDJ Original Style STAR06 Replacement Bag
Replacement bag for STAR06.
LEDJ 6 x 3M Stand and Bag Set
STAR09
Comes complete with 2 stands, 3 T-pieces, 3 section 6m crossbar with
centre support pole and a heavy duty carry bag, which will protect the
stand system
PRO TRI LED STAR CLOTH SERIES
LEDJ 3 X 2M Tri Cloth System & Controller
STAR19
Cloth
40 x 5mm tri-colour LEDs
System includes: one 3 x 2m Tri LED starcloth and one controller with
cables
Heavy duty fire retardant wool serge
Hanging tabs on 3 sides
Controller
0-100% dimming and variable strobe
DMX channels: 3 or 7 selectable
Sound active, auto and master/slave modes
3-pin XLR in/out sockets
IEC Power in socket
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€360.63
€443.57
€260.26
€320.12
€92.95
€114.33
€1,022.45
€1,257.61
€825.17
€1,014.96
€260.13
€319.96
PRO TRI LED STAR CLOTH SERIES
LEDJ Pro Tri Cloth Controller
STAR20
DMX channels: 7 or 28 selectable
Sound active, auto and master/slave modes
4 push button menu with LCD display
3-pin XLR in/out sockets
5-pin XLR in/out sockets
PowerCON in socket
LEDJ Pro 3 X 2M Tri Cloth Only
STAR21
Cloth
43 x 5mm tri-colour LEDs
Heavy duty fire retardant wool serge
Hanging tabs on 3 sides
Controller - not included
Dedicated controller available (STAR20 - can control 2 cloths)
LEDJ Pro 2 X 1M Tri Cloth Only
STAR22
Cloth
31 x 5mm tri-colour LEDs
Heavy duty fire retardant wool serge
Hanging tabs on 3 sides
Controller - not included
Dedicated controller available (STAR20 - can control 2 cloths)
LEDJ Pro 6 X 3M Tri Cloth & Controller
STAR12
Cloth
128 x tri-colour LEDs
System includes: one 6 x 3m Tri LED starcloth and one controller with
cables
Heavy duty fire retardant wool serge
Metal eyelets on all four sides
Controller - can control 2 cloths
0-100% dimming and variable strobe
DMX channels: 7 or 28 selectable
Sound active and auto modes
4 push button LCD display
Independent control of 8 groups of LEDs by DMX
PowerCON input socket
3-pin XLR sockets
5-pin XLR sockets
LEDJ Pro 6 X 3M Additional Tri Cloth For STAR12
STAR11
Cloth:
128 x tri-colour LEDs
Cloth only supplied
Heavy duty fire retardant wool serge
Metal eyelets on all four sides
LEDJ Pro Twin 6 x 3M Star Cloth Flight Case
CASE119
Will hold two 6 x 3M Starcloths
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Heavy duty interlocking ball corners for added impact protection & to
enable safe, secure stacking
4 deep wheel recesses for added impact protection & to enable safe,
secure stacking
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€1,502.73
€1,848.36
€283.83
€349.11
€615.52
€757.09
€1,491.58
€1,834.64
PRO TRI LED STAR CLOTH SERIES
LEDJ Pro 8 X 4M Tri Cloth & Controller
STAR13
Cloth
192 x tri-colour LEDs
System includes: one 8 x 4m Tri LED starcloth and
one controller with cables
Heavy duty fire retardant wool serge
Metal eyelets on all four sides
Controller
0-100% dimming and variable strobe
DMX channels: 7 or 28 selectable
Sound active and auto modes
4 push button LCD display
Independent control of
8 groups of LEDs by DMX
PowerCON input socket
3-pin XLR sockets
5-pin XLR sockets
LEDJ Pro Twin 8 x 4M Star Cloth Flight Case
CASE130
Will hold two 8 x 4M Starcloths
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Heavy duty interlocking ball corners for added impact protection & to
enable safe, secure stacking
4 deep wheel recesses for added impact protection & to enable safe,
secure stacking
TRI LED MATRIX CLOTH SYSTEMS
LEDJ 3 X 2M Tri LED Matrix Cloth System
STAR15
Cloth
187 x 5mm tri-colour LEDs
System includes: one 3 x 2m Tri LED matrix cloth, one controller and
heavy duty carry bag
Hanging tabs on 3 sides
Fire retardant material
Controller
DMX channels: 2
All on, sound active and chase modes
Built-in programs on SD card
Pre-programmed SD card included
LEDJ Pro 3 X 2M Tri LED Matrix Cloth System
STAR16
Cloth
726 x 5mm tri-colour LEDs
System includes: one 3 x 2m Tri LED matrix cloth, one controller and
heavy duty carry bag
Hanging tabs on 3 sides
Fire retardant material
Controller
DMX channels: 2
All on, sound active and chase modes
Built-in programs on SD card (included)
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€171.67
€211.15
€18.59
€22.87
€160.97
€197.99
€156.66
€192.69
€18.59
€22.87
€513.29
€631.34
TRI LED DJ SKIRT MATRIX CLOTH
LEDJ DJ Skirt Star Cloth System
STAR04
STAR04B
Cloth:
50 x 5mm white LEDs
System includes: one LED Curtain, heavy duty carry bag and controller
Hanging tabs on 3 sides
Fire retardant material
Fits neatly on to most 122cm stands
Frontal support bar to support the cloth
Controller:
All on, sound active and chase modes
LEDJ STAR04/17 Replacement Bag
Replacement bag for STAR04 or STAR17.
LEDJ LED Table Cloth System
STAR08
Cloth:
32 x 5mm white LEDs
System includes: one LED Curtain, heavy duty carry bag and controller
Hanging tabs on 3 sides
Fire retardant material
Controller:
All on, sound active and chase modes
LEDJ Blue LED Table Cloth System
STAR08A
STAR08B
Cloth:
32 x 5mm blue LEDs
System includes: one LED Curtain, heavy duty carry bag and controller
Hanging tabs on 3 sides
Fire retardant material
Controller:
All on, sound active and chase modes
LEDJ STAR08/08A/18 Replacement Bag
Replacement bag for STAR08, STAR08A or STAR18.
LEDJ Tri LED DJ Skirt Matrix Cloth System
STAR17
Cloth:
165 x 5mm tri-colour LEDs
System includes: one LED Video Curtain, heavy duty carry bag and
controller
Hanging tabs on 3 sides
Great for Mobile DJ's and bands
Fire retardant material
Fits neatly on to most 122cm stands
Frontal support bar to support the cloth
Controller:
DMX channels: 2
All on, sound active DMX and chase modes
Built-in programs on SD card
Pre-programmed SD card included
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€283.28
€348.44
€981.56
€1,207.32
€23.24
€28.58
€122.25
€150.36
€183.37
€225.55
TRI LED DJ SKIRT MATRIX CLOTH
LEDJ Tri LED Matrix Table Cloth System
STAR18
Cloth:
72 x 5mm tri-colour LEDs
System includes: one LED Video Curtain, heavy duty carry bag and
controller
Hanging tabs on 3 sides
Fire retardant material
Fits neatly on to most 122cm stands
Note: There will be no software made for this cloth
Controller:
DMX channels: 2
All on, sound active DMX and chase modes
Built-in programs on SD card
Pre-programmed SD card included
LEDJ Syncro Drape System
STAR30
System includes:
one 3 x 2M tri cloth, one 2 x 1M tri cloth, heavy duty carry bag and
controller
3 x 2M tri cloth:
176 x 5mm tri-colour LEDs
Heavy duty fire retardant wool serge
Metal eyelets on all 4 sides
2.2 x 1M tri cloth:
78 x 5mm tri-colour LEDs
Heavy duty fire retardant wool serge
Controller:
DMX, sound active, auto modes
30 built-in programs
4 push button menu with LCD display
3-pin XLR in/out sockets
5-pin XLR out sockets
IEC power in socket
Power on/off switch
STAR CLOTH ACCESSORIES
STAR23
LEDJ 4-Pin Power/Data Extension Cable
LEDJ Text Editor (For STAR17)
STAR50
LEDJ Tri Led DJ Skirt Matrix Cloth (STAR17) sold seperately.
Software authentication code can be purchased from your authorised
Prolight dealer.
System Requirements:
Intel Pentium 4 or AMD Athlon 64 processor
Microsoft Windows XP with Service Pack 2 (Service Pack 3
recommended); Windows Vista Home Premium, Business, Ultimate, or
Enterprise with Service Pack 1; or Windows 7
512MB of RAM (1GB recommended)
4MB of available hard-disk space for installation
800 x 600 Screen Resolution 16 Bit Colours (32 Bit Recommended)
Internet Connection
.NET Framework 4 (Available from Microsoft.com)
LEDJ Text Editor PRO (For STAR16)
STAR52
LEDJ Pro 3 x 2M Matrix Cloth (STAR16) sold seperately.
Software authentication code can be purchased from your authorised
Prolight dealer.
System Requirements:
Intel Pentium 4 or AMD Athlon 64 processor
Microsoft Windows XP with Service Pack 2 (Service Pack 3
recommended); Windows Vista Home Premium, Business, Ultimate, or
Enterprise with Service Pack 1; or Windows 7
512MB of RAM (1GB recommended)
4MB of available hard-disk space for installation
800 x 600 Screen Resolution 16 Bit Colours (32 Bit Recommended)
Internet Connection
.NET Framework 4 (Available from Microsoft.com)
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€18.59
€22.87
€69.02
€84.89
€35.30
€43.42
€109.68
€134.91
€45.90
€56.46
€18.06
€22.22
€18.59
€22.87
STAR CLOTH ACCESSORIES
LEDJ Starcloth 10M Extention Cable
STAR02
10 Metre signal extension cable for LEDJ Starcloths
Only suitable for:
STAR01, STAR03, STAR04, STAR05
STAR06, STAR07, STAR08, STAR08A
CONTROLLERS
Acme CA 9RTX Wireless Remote System
CONT01
5 groups of fixture control buttons (CA-9TX)
Stand by button: blacks out the units
Function button: Activates various effects such as; X/Y movement,
strobe,
dimmer and gobo/colour changes
Mode button: Runs different modes e.g. Audio, manual, auto and fast/
slow
Data connection: 5-pin din
Transmitting/receiving distance: Up to100M
Frequency: 433.92MHz
CA-9 TX
Dimensions: 101.3 x 46.8 x 17.3mm
Weight: 0.5kg
CA-9 RX
Acme PC 08 Effects Switch Panel
CONT05
8 way switch panel
8 illuminated switches
8 x IEC outlets
8 x IEC plugs included
13A circuit breaker
Max load: 16A
Transcension DMX Operator 2 Controller
CONT06
192 DMX channels
Banks each composed of 8 programmable scenes
8 Faders to control the DMX levels
Built-in microphone for audio triggers
Midi-in
4 Digit LCD display
Black-out and master controlled manually or by MIDI
Chase programming and chase controlled manually or by MIDI
Power input: DC 9V-12V by adaptor (included)
iSolution CA 8F Foot Controller
CONT09
3 Foot control pedals:
Standby: Fixture blackout
Mode: Fast/Slow, Audio, Manual and Auto
Function: Functions are varied dependant on fixture
Acme CA 8 Hand Controller
CONT10
Compact Three Function Controller
Suitable for various Acme products
Functions offered depends on which lighting fixture you are connecting
Ideal for small shows
Compatible with iSolution fixtures
Length: 10 Meters
Equinox Smart Controller
CONT18
Compact three function controller
Suitable for select Equinox products
Functions offered depends on which lighting fixture you are connecting
Ideal for small shows
Length: 5m
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€44.62
€54.88
€184.04
€226.37
€244.37
€300.58
€139.43
€171.49
€72.50
€89.18
€91.09
€112.04
€49.51
€60.90
€83.66
€102.90
CONTROLLERS
CONT19
Acme Software Uploader IU-01
Acme CA M26 DMX Merger/Splitter
CONT20
Split and merge DMX signals
2 DMX inputs and 6 DMX outputs
3-pin & 5-pin XLR inputs/outputs
DMX refresh rate: 23ms (44Hz) to 45ms (22Hz)
100% electrical isolation between all inputs/outputs
1U, 19" rack mountable
Acme CA 2405 DMX Switch Pack
CONT30
Developed specifically for use with low power LED fixtures, low leakage
design prevents LED fixtures from flashing when powered down
DMX channels: 24
24 IEC output sockets
3-pin XLR in/out sockets
16A circuit breaker
Max. load: 0.5A (per channel)
Acme CA 24D Power Switch Panel
CONT31
24 channel DMX switch controller
DMX out connection: 3-pin XLR
Master/slave connection: RJ-45
LEDJ Lil' Mix
LEDJ122
7 hold-colour buttons for instant colour selection with dimming control
3 buttons for auto chase, auto fade, colour mix
Each mode with speed control
Sound active function available and sensitivity can be adjusted
Blackout and strobe functions
LEDJ HBR 1D Controller
LEDJ123
6 channel LED controller
7 preset colour buttons for instant colour selection
6 buttons for dimming, sound active, mood, meteor, fade and colour
change
9 flow buttons for instant light shows
Adjustable sound sensitivity
Blackout, flood and strobe functions
0-100% dimming
LEDJ MB 2 Foot Controller
LEDJ124
Robust housing
Large foot pedals
LED mode indicators
Operations: auto, audio, flood and blackout modes
Connection: 5-pin XLR socket
On/Off power switch
Can also work in conjunction with the HBR1D controller
LEDJ S1 Controller
LEDJ126
3/6 channel LED controller
7 preset colour buttons
6 mode buttons: DMX, sound active, auto, colour fade and colour
change
Adjustable sound sensitivity
Blackout, flood and strobe functions
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€49.51
€60.90
€76.40
€93.98
€70.29
€86.46
€124.79
€153.50
€165.45
€203.50
CONTROLLERS
LEDJ S1F Foot Controller
LEDJ127
Robust housing
Large foot pedals
LED mode indicators
Operations: auto, audio, flood and blackout modes
Connection: 5-pin XLR socket
On/Off power switch
LEDJ StomPAR Controller
LEDJ128
Sound active, auto run, static colour selection and blackout modes
Preset colours
4 large footswitches: mode, up/down and blackout
Adjustable sound and speed sensitivity
6 digit LED display
Built-in programs
Robust housing
3-Pin XLR out socket
On/Off power switch
LEDJ RGB 1 Controller
LEDJ129
6 channel LED controller
7 preset colour buttons
4 mode buttons: DMX, sound active, colour fade and colour change
Adjustable sound sensitivity
Blackout, flood and strobe functions
Transcension DMX Baby JC1 Controller
BOTE01
Professional 64-channel DMX controller ideal for intelligent fixtures up
to 8 channels each
8 intelligent fixtures up to 8 channels each
24 pages of 4 freely programmable scenes
4 freely programmable programs, Mix/Sequence available (Max. 99
steps)
Free access of CF card (32MB) for the exchange of data
Data and software can be downloaded or uploaded to a PC (RS 232
port)
Built-in microphone for music sync function
USB socket for DJ lamp (5V, 1W)
Joystick for Pan/Tilt adjustment
Black-out capable of 0-10 seconds delay
Fog machine trigger button
Power failure memory
All data can be swapped between two units
Fade time/Non-fade time available on programme chase
Auto / Music / Manual chase
Transcension LED Master 64 Controller
BOTE04
Designed to control all LED lighting fixtures with up to 8 channels
Control up to 64 channels of 8 LED groups
8 individual buttons for selecting 8 groups of lighting fixtures
Each fixture can be in different playback modes simultaneously
LED display for easy navigation
8 colour pre-set buttons
6 saved colours with 4 banks
8 chases, each with up to 32 steps
2 user definable channels
Ability to save assignments onto USB memory stick
4 operation modes: auto chase, sound chase, manual control and fade
Password protection
Power loss memory feature
Optional Foot Controller (CA-8F) for ease of operation
Variable strobe function
19" rack ears (included)
LED gooseneck lamp included
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€146.86
€180.64
€104.86
€128.98
€46.48
€57.16
€136.86
€168.33
€94.74
€116.53
€111.54
€137.19
€111.55
€137.21
CONTROLLERS
Transcension Commander 384
BOTE12
Controls 12 fixtures of up to 32 channels each (Total 384 channels)
30 banks, each with 8 scenes
6 chases, each with up to 240 scenes
Record up to 6 chases with fade time and speeds
16 sliders for direct control of channels
Built-in microphone for music mode
Auto mode programme controlled by fade time sliders
LED gooseneck lamp included
DMX out: 3 pin XLR
Transcension Light and Easy Controller
BOTE13
Designed to work on all 4 channel LED lighting fixtures
Controls up to 32 channels of 8 LED groups
8 individual buttons for selecting 8 groups of lighting fixtures
LED display for easy navigation
8 colour pre-set buttons with 4 banks, 32 pre-set colours in total
8 chases, each can save up to 32 scenes
3 operation modes: auto, sound and manual
Blackout function and instant strobe access button with variable speed
Optional Foot Controller (CA-8F) for ease of operation
Transcension SDC6 DMX Controller
BOTE16
6 individual channel faders and 1 master fader
6 DMX channels
Compact design and simple operation
Battery Type: PP3 9V
Transcension Show Director
BOTE22
8 Individually switched channels
Illuminated switches
8m low voltage control cable
Overload protection
Channel output: 5A
Output connector: IEC x 8
Transcension CDP 405 Digital Dimmer Pack
BOTE26
Functions: 4 channel
DMX dimmer pack with built-in programs and master/slave link
Analog input/output
Programme chase speed/stand alone function
Dipswitches
Output connector: Bulgin x 2, IEC x 4
Channel output: 5A
Transcension DDP 405 Digital Dimmer Pack
BOTE27
Functions: 4 channel DMX 512 dimmer pack with built-in programs and
Master/slave link
16 programs
Chase speed/stand alone functions
LCD display
Output connector: IEC x 8
Channel output: 5A
Transcension MPX 405 Digital Dimmer Pack
BOTE28
4 channel DMX dimmer pack with built-in programs and master/slave
link
Separate and parallel receive functions
16 programs
Chase speed/stand alone function
LCD display
Output connector: Bulgin x 2, IEC x 4
Channel output: 5A
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€104.22
€128.19
€72.50
€89.18
€228.94
€281.60
€66.78
€82.14
€91.09
€112.04
CONTROLLERS
Transcension DSP 405 DMX Switch Pack
BOTE29
4 channel DMX Switch Pack
Selectable 1-channel, 2-channel or 4-channel power pack
LCD display
Zero-crossing circuitry for protection of transformer loads when
switching
16 built-in chase programs for stand use alone
Manual speed function
XLR connection
Output connector IEC x 8
Channel output 5A
Transcension UP2 Dimmer Controller
BOTE32
Compact, 1-channel DMX / HTP Dimmer Pack
Standard DMX-512 Protocol
Dim Preset - Dim Limiter and can be changed from a Dimmer to a
Switch Pack
LED Display makes it easy to set DMX channels
HTP function
XLR In & Out
Output: 2 x IEC Socket
Easy to use mounting bracket
Maximum Power: 10A
Transcension Scene Commander
BOTE33
24 channel DMX-512 dimming console
4 pages with 12 scenes with total 48 playback faders (simultaneous
playback)
96,000 programmable steps
Adjustable chase and fade times
Re-assignable channels
3-pin and 5-pin DMX outputs
Built-in cross fader, dark and kill buttons
Direct audio input
Sequential linking or simultaneous playback of chases
Override chases on the fly
Beat activation, tap sync and auto run
7U rack mountable
Transcension SDC-816 DMX Controller
BOTE34
8 individual channel faders and 1 master fader
16 DMX channels
Compact design and simple operation
Battery type: PP3 9V
Transcension Commander 192
BOTE35
Controls 12 intelligent lights of up to 16 channels each (total 192
channels)
23 banks, each with 8 scenes; 6 chases, each with up to 184 scenes
Record up to 6 chases with fade time and speeds
8 sliders for direct control of channels
Built-in microphone for music mode
Auto mode program controlled by fade time sliders
DMX in/out: 3 pin XLR
19" rack mountable
LED gooseneck lamp included
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€249.84
€307.31
€632.94
€778.51
€109.68
€134.91
€109.68
€134.91
CONTROLLERS
Transcension 6 Channel 19" Dimmer Pack
BOTE40
6 channel DMX / analogue dimmer pack with up to 10A output per
channel
3 phase mains supply (1 phase possible at lower output power) via
screw terminals on din rail
DMX 512 standard interface for digital control
Additional 8-pole DIN connector for analogue control (0 - 10 V)
Adjustable pre-heat and limiter function to prolong lamp life
Precise curve function enables selection of different fade modes
Automatic digital input check to detect DMX signal failure
Switch option for simple on/off control of each channel
Manual mode for dimming capability without an external lighting
console
Auto store function saves all settings after leaving configuration mode
LCD display for indication in dark environments
Rugged construction ensures long life, even under the most demanding
conditions
Channel output: 10A via screw terminals on din rail
Transcension 12 Channel 19" Dimmer Pack
BOTE45
12 channel modular digital dimmer pack
USITT DMX-512 (3-pin) input
4U 19" rack mountable
High speed micro processor
Real time zero crossing detection
Backlit digital display
Dimming response time down to 24mS
Minimum channel output setting from 0-30%
Maximum channel output setting from 70-100%
Individual channel curve option setting
Channel curve settings include Linear, Square, Non Dim and S-Curve
DMX fail backup
Programs, last scene hold and analog options
Power failure memory
DMX output
Fan cooled
12 x 20A UL approved
MCB breakers
20A/CH. Total 240A single phase connection
20A/CH. Total 80A per phase-three phase connection
LCD display for indication in dark environments
Rugged construction ensures long life, even under the most demanding
conditions
Channel output: 20A via screw terminals on din rail
Transcension S4 DMX Booster/Distributor
BOTE60
4 way DMX distributor with one input and four outputs
3-pin & 5-pin XLR input sockets
3-pin & 5-pin XLR output socket per channel
Each DMX output features an independent driver
Built-in terminator switch
Input and output fitted with 50mA internal fuses
100% electrical isolation between all inputs/outputs
Transcension DMX 512 Merger
BOTE61
3 different operation modes; HTP, back up and merge
2 x 3-pin XLR input sockets
1 x 3-pin XLR output socket
2 x 5-pin XLR input sockets
1 x 5-pin XLR out socket
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€37.18
€45.73
€88.63
€109.01
CONTROLLERS
Transcension Compact 2 Way DMX Splitter
BOTE62
Compact 2 way DMX distributor with one input and two outputs
3-pin XLR input socket
3-pin XLR output socket per channel
Each DMX output features an independent driver
100% electrical isolation between all inputs/outputs
9V DC-power adapter included
Transcension Neutrik Powercon Distributor
BOTE64
1 in, 4 out plus pass through output
Heavy duty metal housing
Power indicator
Reset breaker
20A resettable breaker
BOTE 66
Transcension Powercon/IEC splitter
€122.25
€150.36
BOTE 67
Transcension Powercon 19" Splitter
€152.81
€187.96
€74.36
€91.46
€147.92
€181.94
€181.39
€223.10
€175.22
€215.52
€452.32
€556.35
iSolution iColor CA-32F Foot Controller
ISIC05
Linkable to the Color Mix CA-32 controller
Switchable between CA-32F and CA32 Color Mix controller
Switches to select hold colours, blackout, full on and chase patterns
Supplied with 10m cable for connection to the CA-32 controller
FLAME EFFECTS
Equinox LED 1.5M Flame Machine
FLAM08
54 x 10mm LEDs (R: 39, B: 15)
High velocity fans (not suitable for low noise applications)
Lightweight robust housing
On/Off power switch
Equinox LED 2.0M Flame Machine
FLAM09
108 x 10mm LEDs (R: 78, B: 30)
High velocity fans
(not suitable for low noise applications)
Robust housing
On/Off power switch
Max. flame height: 2m
Equinox RGB LED 1.5M DMX Flame Machine
FLAM11
177 x 10mm LEDs (R: 60, G: 60, B: 57)
DMX channels: 6
Sound active, auto and master/slave modes
3-pin in/out sockets
Built-in colour change programs
High velocity fans (not suitable for low noise applications)
Equinox 2.0M Flight Cased DMX LED Flame Machine
FLAM12
18 x 3W RGBA LEDs (R: 3, G: 6, B: 6, A: 3)
DMX channels: 4
Static colour mixing, colour change, colour fade, sound active and
master/slave modes
0-100% dimming and variable strobe
Supplied in a flightcase
4 push button menu with LED display
IEC power in socket
3-pin XLR in/out sockets
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€22.31
€27.44
€29.74
€36.59
€26.03
€32.01
€40.90
€50.30
€393.17
€483.60
€57.25
€70.42
€219.00
€269.37
€60.71
€74.68
€46.48
€57.16
€122.81
€151.05
FLAME EFFECTS
FLAM07
FLAM03
FLAM10
FLAM06
Equinox 1.5M Flame Silk
Replacement Silk for 1.5m Flame Machine
Equinox XL 1.75m Flame Silk
Replacement Silk for 1.75m Flame Machine
Equinox 2.0M Flame Silk
Replacement Silk for 2.0m Flame Machine.
Equinox 2.8m Flame Silk
Replacement Silk for 2.8m Flame Machine
DJ SCREENS
Equinox DJ Booth System
EQLED12L
EQLED12A
System includes: 4 sided folding DJ booth, shelf support cross bars, 2
piece shelf, carry bag and white lycra cover
Black aluminium finish
Compact and lightweight design
Additional black lycra cloth and LED cloth available
Lycra cloths:
Hand wash only at 30 degrees
Do not tumble dry
Equinox DJ Booth Replacement Lycra - Black
Equinox DJ Booth LED Starcloth
EQLED12B
Cloth
72 x 5mm white LEDs
Hanging tabs on 3 sides
Low reflection, fire retardant material
Controller
DMX Channels: 5
Sound active, auto run, auto fade, all on and chase modes
IEC power connection
3-pin XLR in/out sockets
Dipswitches
EQLED12C
Equinox DJ Booth Replacement Lycra - White
EQLED12D
Zipped fabric bag with carry straps, designed to hold 1 x Equinox DJ
Booth (EQLED12).
Equinox DJ Booth Replacement Bag
DJ Booth Overhead Kit
EQLED12E
Dual-height uprights
Heavy duty lighting bar with 9 lower and 9 upper fixture location points
Wingnut fixing bolts
4 x Upright clamps
Carry bag
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€176.61
€217.22
€18.67
€22.97
€31.60
€38.87
€92.95
€114.33
€250.97
€308.69
€102.25
€125.76
€148.20
€182.29
€31.60
€38.87
DJ SCREENS
Equinox Foldable DJ Screen
EQLED10
System includes: 4 rectangular screens and 4 lycra cloths
Black steel finish
Compact and lightweight design
Velcro strips
Lycra cloths:
Hand wash only at 30 degrees
Do not tumble dry
Equinox DJ Screen Replacement Lycra Cloth
EQLED11
White stretchable lycra with integrated velcro strips
Sold in singles
Hand wash only at 30 degrees
Do not tumble dry
Equinox Carry Bag for Foldable DJ Screen
EQLED10A
Zipped fabric bag with carry strap, designed to hold 1 x Equinox
Foldable DJ Screen (EQLED10)
STANDS / BRACKETS
Rhino LG 350 Truss Stand
TRUS01
Black annodised finish
Ideal for mobile DJ's
Easy set-up
Tripods extend to 3.5m
2 x 1.5m I beams create 3m trussing span
Stands supplied with safety locking pins
Max Load: 40kg ( evenly distributed )
Rhino Wind Up Trilite Set With 4M Truss
TRUS03
Black annodised finish
Ideal for mobile DJ's and bands
Easy set-up
Tripods extend to 2.6m
2 x 2m truss sections create a 4m trussing span
Stands supplied with safety locking pins
Truss diameter: 38mm
Max Load: 75kg (evenly distributed)
Rhino 4' Pro Disco Stand
STAN12
All in One Mobile Disco Stand
Top shelf for flight cased equipment
Bottom shelf for amps and lighting controllers
Height adjustable pre-drilled lighting bar
Supplied with fixing bolts
Optional bag available (STAN12B)
Rhino Twin Bar 4' Pro Disco Stand
STAN12A
All in One Mobile Disco Stand
Top shelf for flight cased equipment
Bottom shelf for amps and lighting controllers
Height adjustable pre-drilled lighting bar
Supplied with fixing bolts
Optional bag available (STAN12B)
Rhino Fabric Bag for STAN12 or STAN12A
STAN12B
Zipped fabric bag with carry handles, designed to hold either one
STAN12 or one STAN12A.
PRODUCT
REF
EURO
EX. VAT
EURO
INC. VAT
€124.54
€153.18
€825.17
€1,014.96
€36.19
€44.51
€5.58
€6.86
€1.86
€2.29
750mm Long
2mm Diameter cable
Max load 20kg
€2.23
€2.74
LEDJ Alu Par 64 Series Floor bracket
€22.31
€27.44
€5.58
€6.86
€3.72
€4.57
DESCRIPTION
STANDS / BRACKETS
Rhino 6' Pro Disco Stand
STAN13
All in One Mobile Disco Stand
Top shelf for flight cased equipment
Bottom shelf for amps and lighting controllers
Height adjustable pre-drilled lighting bar
Supplied with fixing bolts
Global Truss DJ Archway + Baseplates
GL0020
Supplied with conical connectors
Easy to set up and break down
Durable and corrosion resistant aluminium
Max load: 220kg
Global Truss 28mm Spigot With Truss Adaptor (814)
GL3003
Supports truss from 25-40 cm
F33 and F34 truss compatible
28mm TV-Spigot with clamps
Global Truss F24 32-35mm Clamp (5036)
CLAM11
Aluminium construction
Supplied with hanging bolt
75kg SWL
Rhino 30cm Safety Wire
CLAM20
300mm Long
2mm Diameter cable
Max load 20kg
Rhino 75cm Safety Wire
CLAM03
LEDJ119
Specially Designed floor bracket for use with the Alu Par 64 Series.
Rhino Quick Clamp
CLAM02
Universal lighting clamp
For use with most square T-bar
Supplied in single units
Max load 10kg
Rhino 25mm G Clamp
CLAM08
Suitable for bars up to 25mm diameter
Includes fixing bolt
Steel construction
Max load 10kg
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€3.72
€4.57
€13.09
€16.10
€18.86
€23.20
€19.48
€23.96
STANDS / BRACKETS
Rhino 50mm G Clamp
CLAM01
Suitable for bars up to 50mm diameter
Includes fixing bolt
Steel construction
Max load 20kg
FOG / HAZE FLUID
Fluid 5LT Aquahaze Dense (Shipped in 4's)
FLUI06
Formulated for use with Atmotech haze machines
Suitable for all brands of smoke machines
Water-based composition
Leaves no oily residue
Supplied in 4 x 5lt bottles
Fluid 5LT Smoke Stream Medium (Shipped in 4's)
FLUI07
Formulated for use with Atmotech smoke machines
Suitable for all brands of smoke machines
Water-based composition
Leaves no oily residue
Supplied in 4 x 5lt bottles
Fluid 5LT Smoke Stream Dense (Shipped in 4's)
FLUI08
Formulated for use with Atmotech smoke machines
Suitable for all brands of smoke machines
Water-based composition
Leaves no oily residue
Supplied in 4 x 5lt bottles
PROTEX CASES
CASE108
Case for 2 Xperior XP 700A Beam/ XP 700SZ Spot
€297.44
€365.85
CASE109
Case for 2 Xperior XP 300A Beam/XP 300SZ Spot
€297.44
€365.85
€249.14
€306.44
Acme Single IM-250S/W Flight Case With Wheels
CASE110
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Heavy duty interlocking ball corners for added impact protection & to
enable safe, secure stacking
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€306.74
€377.28
€272.83
€335.58
€306.74
€377.28
PROTEX CASES
Acme Twin IM-250S/W 2 Flight Case With Wheels
CASE111A
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Heavy duty interlocking ball corners for added impact protection & to
enable safe, secure stacking
Holds 2 x iMove 250S/W
Acme Single IM-575W/S Flight Case With Wheels
CASE113
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Heavy duty interlocking ball corners for added impact protection & to
enable safe, secure stacking
Holds 1 x iMove 575W
Acme Twin IM-575W/S 2 Flight Case With Wheels
CASE113A
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Heavy duty interlocking ball corners for added impact protection & to
enable safe, secure stacking
Holds 2 x iMove 575W/S
CASE114
Case for 4 iSolution iMove 350S/SR/Beam
€272.00
€334.56
CASE116
Case for 4 eLumen8 Beam 2R
€302.56
€372.15
€306.74
€377.28
Xperior 5R Beam twin Flightcase
CASE117
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Heavy duty interlocking ball corners for added impact protection & to
enable safe, secure stacking
Holds 2 x Xperior 5R/5F Beam
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€320.50
€394.22
€260.11
€319.94
€156.25
€192.19
€83.84
€103.13
PROTEX CASES
Acme IF-1200/ IF-575 Flight Case With Wheels
CASE118
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Heavy duty interlocking ball corners for added impact protection & to
enable safe, secure stacking
Holds 1 x iFollow 575 / iFollow 1200
LEDJ Pro Twin 6 x 3M Star Cloth Flight Case
CASE119
Will hold two 6 x 3M Starcloths
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Heavy duty interlocking ball corners for added impact protection & to
enable safe, secure stacking
4 deep wheel recesses for added impact protection & to enable safe,
secure stacking
Protex Equipment Stand Flight Case
CASE120
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Heavy duty interlocking ball corners for added impact protection & to
enable safe, secure stacking
Protex Small Road Case
CASE121
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Heavy duty interlocking ball corners for added impact protection & to
enable safe, secure stacking
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€106.61
€131.13
€121.69
€149.68
€269.56
€331.55
€283.83
€349.11
PROTEX CASES
Protex Medium Road Case
CASE122
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Heavy duty interlocking ball corners for added impact protection & to
enable safe, secure stacking
Protex Large Road Case
CASE123
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Heavy duty interlocking ball corners for added impact protection & to
enable safe, secure stacking
Protex Tour Case
CASE125
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All 8 handles feature heavy duty rubber grips for comfort & non slip
safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
4 deep wheel recesses for added impact protection & to enable safe,
secure stacking
2 padded space dividers
LEDJ Pro Twin 8 x 4M Star Cloth Flight Case
CASE130
Will hold two 8 x 4M Starcloths
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels are 30% thicker than most other
suppliers
Heavy duty, industrial grade handles & butterfly catches are riveted for
strength
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Heavy duty interlocking ball corners for added impact protection & to
enable safe, secure stacking
4 deep wheel recesses for added impact protection & to enable safe,
secure stacking
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€293.85
€361.44
€122.74
€150.97
€101.62
€124.99
€68.92
€84.77
€100.18
€123.22
€51.25
€63.04
€45.93
€56.50
€45.93
€56.50
€80.53
€99.05
PROTEX CASES
Acme FS-575/ FS-1000 Flightcase
CASE131
Holds 1 x FS 575 or FS 1000 followspot
Extra compartment for followspot stand, power cables and DMX cables
etc
Interlocking tongue & groove edging ensures that all lids & covers stay
secure even in an impact & form a fully dust proof seal
9mm vinyl laminated plywood panels
Heavy duty, industrial grade handles & butterfly catches
All handles feature heavy duty rubber grips for comfort & non slip safety
Riveted 35mm aluminium profile edge strips provide rigidity, strength &
durability
Protex Par Can Storage Case (Holds 4)
CASE16
Foam lined to accept 4 x LEDJ Short Nose Par 64/56 Cans (inc G
Clamps) or 4 x LEDJ Long Nose Par 64/56 Cans (without G Clamps)
Lightweight
CASE17
Foam lined to accept 2 x LEDJ Short Nose Par 64/56 Cans (inc G
Clamps) or 2 x LEDJ Long Nose Par 64/56 Cans (without G Clamps)
Lightweight
Protex Par Can Storage Case (Holds 2)
Protex ImpossibLED/Matrix/Festival Case
CASE22
Foamed lined to accepted 1 of the following units;
Equinox Fever, Equinox Hype, Equinox Bounce, Acme Radiant
Acme Rage, Acme Fury, Acme MarveLED
Acme ImpossibLED, Acme Matrix, Acme Festival
Lightweight
Protex Twin Spectra Batten Case
(Excluding IP Models)
CASE29
Foamed to accept 2 Spectra Battens + Controller
or cables etc..
Lightweight
Protex Large Storage Case
CASE32
Multi-purpose equipment case
Webbed handles at either end for easy transportation
Lightweight
Protex Small Storage Case
CASE33
Multi-purpose equipment case
Webbed handle at either end for easy transportation
Lightweight
CASE37
Multi-purpose equipment case
Protection foam
Lightweight
Protex Multi Case
Protex Twin Multi Case
CASE37A
Foam lined to accept 2 units
Lightweight
PRODUCT
REF
DESCRIPTION
EURO
EX. VAT
EURO
INC. VAT
€86.34
€106.20
€121.18
€149.05
€140.59
€172.92
€109.11
€134.20
€121.03
€148.86
€98.10
€120.67
PROTEX CASES
Protex Cougar Pack Case
CASE63
Foamed to accept 2 Acme Cougars
Lightweight
CASE65
Foam lined to accept any four of the Slimline Series
Lightweight
Protex Quad Slimline Par Panel Case
Protex Twin Stage Colour 24 Tri Case
CASE69
Foam lined to accept 2 LEDJ Stage Colour 24 Tri
+ controller and cables
Lightweight
CASE71
Foam lined to hold any four of the six Slimline 5Q5 and 7Q5 Series
Lightweight
Protex Slimline Q series Case (Holds 4)
Protex Colour Storm Case
CASE75
Foamed to accept 2 x LEDJ Colour Storm RBG/Tri/Quad or 4 x LEDJ
Colour Storm Quad 0.5M battens + Controller
or cables etc..
Lightweight
Protex Flame Case
CASE77
Foamed to accept an Equinox RGB 1.5M DMX Flame Machine/
Equinox 1.5M Flame Machine
Lightweight
Protex Twin Kudos 108/120 Case
CASE78
Foamed to accept 2 x Kudos 108 or 120
Lightweight
€99.08
€121.87
CASE94
Protex iMove 350S/350SR Case
€85.57
€105.26
CASE95
Protex Slimline 1T36, 1CW20, 1WW20, 7HEX6 Case
(Holds 4)
€121.18
€149.05