DC590+ Integrator Series 2
DC Drives 3 HP - 2000 HP (15A - 2400A)
DC590+ DC Drive Integrator Series 2
Digital DC Drives - 3 to 2000 HP (15A – 2400A)
Product Overview
of all applications, from basic motor
installations through to the most
demanding multi-motor systems.
within the package. This innovative
approach radically reduces design
time, panel space, wiring time and
cost. The DRV concept is unique
and comes from the experience
gained from thousands of successful
applications across a diverse range
of industries.
The DC590+ is also available as
a “ready to install” drive package
called the DRV. This is a single
integrated module that includes all
the associated power components
The DC590+ is easily
integrated into new or
existing systems, offering
improved levels of
performance and productivity.
As part of the full DC drives
product range, the DC590+
further confirms Parker SSD
Drives’ position as the market
leader in DC drive technology.
Product Overview Chart
Systems
DC590+ Integrator Series 2
Process
Simple
FUNCTIONALITY
The DC590+ Integrator Series
2 sees the next step in the
development of DC drive
technology, derived from over 30
years experience in designing DC
drives. With its innovative 32-bit
control architecture, the DC590+
has the flexibility and functionality
to more than meet the requirements
DC506/
507/508
DC512C/514C
POWER
12 Amps
32 Amps
2700 Amps
Advanced Control Architecture
Benefitting from the improved
performance of a 32-bit RISC
processor, the DC590+ Integrator
Series 2 delivers enhanced
functionality and increased
flexibility, making it suitable
for use in a wider range of more
complex applications.
• Faster drive response
• Greater control capabilities
• Increased math and logic function blocks
• Enhanced diagnostic and programming functionality
• Common programming tools
with other SSD Drives models
Specification
Operating Altitude
Up to 1640 ft (500m) above sea level
Ratings Power Configuration
DC590+ Four Quadrant Regenerative;
2 Fully Controlled Three Phase Thyristor Bridges
DC591+ Two Quadrant Non-Regenerative;
1 Fully Controlled Three Phase Thyristor Bridge
Derate 1% per 656 ft (200m) above 1640 ft (500m) to maximum
Digital Outputs (3 Total - 24V(max 30V) 100mA)
Short circuit protected
3 – Configurable
of 16,400 ft (5000m)
Reference Supplies
1 – +10VDC
1 – -10VDC
1 – +24VDC
Protection
High Energy MOV’s
Heatsink Overtemperature
Instantaneous Overcurrent
Thyristor Trigger Failure
Inverse Time Overcurrent
Interline Snubber Network
Field Failure
Zero Speed Detection
Speed Feedback Failure
Standstill Logic
Motor Overtemperature
Thyristor Controlled Variable Field Supply
Field Current (Amps DC)
4A
Frame 1
10A
Frame 2 and 3
30A
Frame 4
60A
Frame 6 and H
Field Voltage (VDC)
AC Input x 0.9 maximum
Armature Current Ratings (Amps DC)
See table below for ratings.
Overload 200% for 10 secs, 150% for 30 secs
Higher ratings with reduced overloads available
Optional Equipment
6911 Operator/Programming Controller
Feedback Boards
• Tach generator
• Encoder
• Optical Fiber Microtach Encoder
Inputs/Outputs
Analog Inputs (5 Total - 12 bit plus sign)
1 – Speed Demand Setpoint (-10/0/+10V)
4 – Configurable
Please refer to manual
Armature Voltage (VDC)
AC Input x 1.2 maximum
Analog Outputs (3 Total - 11 bit plus sign)
1 – Armature Current Output (-10/0/+10V or 0 - 10V)
2 – Configurable
AC Supply Voltage (VAC)
110 - 220V (±10%) All Sizes
220 - 500V (±10%) All Sizes
500 - 600V (±10%) Frame 4, 6, and H
600 - 690V (±10%) Frame 6 and H
50/60Hz Three Phase
Digital Inputs (9 Total - 24VDC max)
1 – Program Stop
1 – Coast Stop
1 – External Trip
1 – Start/Run
5 – Configurable
Environment
Ambient Operating Temperature
0°-45°C (32°-113°F) Frame 1 and 2
0°-40°C (32°-104°F) Frame 3, 4, 6 and H
Thermistor Input
1 – Isolated
Derate 1% per °C above ambient to 55°C (131°F) max
Communication Technology Box
• LINK
• Profibus DP
• Devicenet
• Controlnet
• Ethernet
• Canopen
• Modbus +
• EI Bisynch/Modbus/RS422/RS485
Standards
• The DC590+ series meets the following standards when installed in accordance with the relevant product manual:
• CE Marked to EN50178 (Safety, Low
Voltage Directive)
• CE Marked to EN61800-3 (EMC Directive)
• UL listed to safety standard UL508C through 500 HP
• cUL listed to Canadian standard C22.2 #14 through
500 HP
Valid at time of print
W
D
D
W
Dimensions - For estimation only
Product Code
Non-Regenerative Regenerative
955+8N0007
HP Rating
Amps
(230/460)
(Max)
955+8N0020
955+8N0030
955+8N0040
955+8N0050
955+8N0060
955+8N0075
955+8N0100
955+8N0125-A3
955+8N0125
955+8N0150-A3
955+8N0150
955+8N0200-A4
955+8N0200-D4
955+8N0250-A4
955+8N0250-D4
955+8N0300-A4
955+8N0300-D4
955+8N0400-A4
955+8N0400-D4
955+8N0500-A4
955+8N0500-D4
955+8N0700-D6
955+8N1000-D6
955+8N1200-D6
955+8N1000
955+8N1250
955+8R0007
955+8R0020 955+8R0030
955+8R0040
955+8R0050
955+8R0060 955+8R0075
955+8R0100
955+8R0125
955+8R0125
955+8R0150
955+8R0150
955+8R0200
955+8R0200
955+8R0250
955+8R0250
955+8R0300
955+8R0300
955+8R0400
955+8R0400
955+8R0500
955+8R0500
955+8R0700-D6
955+8R1000-D6
955+8R1200-D6
955+8R1000
955+8R1250
3/7.5
10/20
15/30
20/40
25/50
30/60
40/75
50/100
60/125
60/125
75/150
75/150
100/200
100/200
125/250
125/250
150/300
150/300
200/400
200/400
250/500
250/500
700
1000
1200
1000
1250
955+8N1500
591+0243/500
591+0380/500
591+0500/500
591+0725/500
591+0830/500
591+1250/500
591+1600/500
591+1950/500
591+2000/500
591+2400/500
955+8R1500
1500
590+0243/500 75/150
590+0380/500
100/200
590+0500/500
150/300
590+0725/500
200/400
590+0830/500
250/500
590+1250/500
750
590+1600/500
1000
590+1950/500
1200
590+2000/500
1250
590+2400/500
1500
H
Frame Dimensions (in/mm)
H
W
D
14.8/375
14.8/375
21.5/546
21.5/546
21.5/546
21.5/546
21.5/546
21.5/546
28.9/735 27.0/686 28.9 735
27.0 686
54.0/1372
39.0/991
54.0/1372
39.0/991
54.0/1372
39.0/991
54.0/1372
39.0/991
54.0/1372
39.0/991
38.0/966
38.0/966
38.0/966
68.0/1727
68.0/1727
7.9/200 7.9/200
7.9/200
7.9/200
7.9/200
7.9/200
7.9/200
7.9/200
17.0/432 17.0/432 17.0/432
17.0/432
18.0/457
21.0/533
18.0/457
21.0/533
18.0/457
21.0/533
18.0/457
21.0/533
18.0/457
21.0/533
56.0/1422
56.0/1422
56.0/1422
60.0/1524
60.0/1524
8.7/220
8.7/220
11.5/292
11.5/292
11.5/292
11.5/292
11.5/292
11.5/292
8.4/213
8.4/213
8.4/213
8.4/213
14.9/378
15.1/384
14.9/378
15.1/384
14.9/378
15.1/384
14.9/378
15.1/384
14.9/378
15.1/384
17.5/444
17.5/444
17.5/444
17.2/436
17.2/436
60.0/1524
11.8/300
10.0/253
10.0/253
10.0/253
10.0/253
27.0/686
27.0/686
27.0/686
33.5/850
33.5/850
17.2/436
9.2/234
14.1/358
14.1/358
14.1/358
14.1/358
17.3/440
17.3/440
17.3/440
16.4/417
16.4/417
15
35
55 70
90
110
125 165 206
206
246
246
360
360
425
425
490
490
700
700
815
815
1200
1600
1950
1600
2000
1
1
2
2
2
2
2
2
3
3
3
3
4
4
4
4
4
4
4
4
4
4
6
6
6
H
H
2400
243
380
500
725
830
1250
1600
1950
2000
2400
H
68.0/1727
319.1/485
4
27.6/700
4
27.6/700
4
27.6/700
4
27.6/700
6
28.1/715
6
28.1/715
6
28.1/715
H
37.6/956 - 55.4/1406*
H
37.6/956 - 55.4/1406*
Black product code indicates DRV package. Blue product code indicates chassis (controller only * First dimension is for non-regen, second is for regen
H
FRAME 1
FRAME 2
W
D
W
D
H
H
FRAME 3
D
FRAME 4
D
W
W
H
H
FRAME 6
Gray panels represent footprint of
DRV units for frames 3, 4, 6, and H.
FRAME H
Frame 1-4 have integral cooling fan assemblies where required.
Optional ducting kit for cubicle roof external ventilation available for
frame 4. Frame Size H has fan cooling assembly that can be cubicle
roof mounted or drive mounted. Add 5.9” (150mm) to overall height
for drive mounted option.
Note: Dimension table includes only the 230/460 volt ratings. Drives
for a wide range of input voltages are available. For product codes,
current ratings, and dimensional data on 110-220 volt, 575 volt, and
690 volt units, please consult factory. Drives of higher power ratings
can also be provided upon request.
Next Generation Technology
Feedback Options
Building upon the highly successful
DC590+ drive used in thousands
of applications world-wide, the
DC590+ Integrator Series 2
drive takes DC motor control to
the next level. With its state-ofthe-art advanced 32-bit control
architecture, the DC590+ drive
delivers highly functional and
flexible control suited to a whole
host of industrial applications.
The DC590+ has a range of options
which are compatible with the most
common feedback devices enabling
simple motor control through to
the most sophisticated multi-motor
system. Armature voltage feedback
is standard without the need for any
interface option.
Providing control for some of
the most demanding motor
control applications, Parker’s DC
experience and technologies are
some of the most advanced in the
industrial marketplace. With drives
from 1 Amp through to 2700 Amps,
Parker can provide the optimum
solution to suit any application.
• Optical fiber microtach encoder
Typical Applications
• Converting machinery
• Plastics and rubber
processing machinery
• Wire and cable
• Material handling
• Automotive
Function Block Programming
Function Block Programming is
a tremendously flexible control
structure that allows an almost
infinite combination of user
functions to be realized with ease.
Each control function (an input,
output, process PID for example)
is represented as a software block
that can be freely interconnected
to all other blocks to provide any
desired action.
The drive is shipped with the
function blocks pre-configured
as a standard DC drive so you
can operate it straight from the
box without further adjustments.
Alternatively you can create your
own control strategy with DSE
Lite software, often eliminating the
need for an external PLC and its
associated complexity and cost.
• Analog tach generator - AC or DC
• Encoder - 5, 12, 15, or 24V
Interface Options
Designed with connectivity in
mind, the DC590+ has a number
of communications and I/O
options that allow the drive to take
control of the application, or be
integrated into a larger system.
When combined with function
programming, custom functions
and control can be easily created
offering the user a highly flexible
and versatile platform for DC
motor control.
Programming/
Operator Controls
Featuring an intuitive menu
structure, the ergonomically
designed operator panel allows
quick and easy access to all
parameters and functions of
the drive via a bright, easy to
read backlit display and tactile
keypad. Additionally, it provides
local control of start/stop, speed
demand and rotation direction
to greatly assist with machine
commissioning.
Connectivity
Whatever the complexity of your
control scheme, the DC590+ has
the interface to suit. As standard
there’s enough analog and
digital I/O for the most complex
applications. Alternatively, add
the relevant ‘technology box’
for immediate access to serial
communications and Fieldbus
networks. The DC590+ has been
designed to fit seamlessly, and
without compromise, into any
control environment.
Analog/Digital Control
• 5 Analog Inputs
(12 bit + sign)
• 3 Analog Outputs
• 9 Digital Inputs (5 configurable)
• 3 Digital Outputs
Serial Communications and
Fieldbus Options
•
•
•
•
•
Profibus-DP
Canopen Modbus RTU RS422/RS485 Controlnet
•
•
•
•
•
Ei Bisynch
LINK
Devicenet
Modbus+
Ethernet
All DC590+ units are available
as non-regenerative or full
4-Quadrant line regenerative
models
• Multi-Language alpha-numeric
display
• Customized parameter values and legends
• On drive or remote mounting
• Local control of start/stop,
speed and direction
• Quick set-up menu
Product web page: www.parker.com/ssdusa/dc590plus
Standard 6901 MMI/Programming Keypad is easy to use, and may be remote
mounted. It is compatible with other SSD
Drives models
DRV - Packaged
DC Drive Technology
The DC590+ is available in
either module, or alternatively
‘DRV’ format.
The DRV version is a selfcontained packaged drive that
includes all the peripheral power
components associated with a
DC drive system, integrally fitted
within the footprint area of
the drive.
DRV version includes:
DC590+ Designed for Systems
The DC590+ Integrator Series
is the ultimate system drive,
designed to meet the exacting
demands of the most complex
and sophisticated multi-drive
applications across a diverse
range of industries. All the
following functions are available
as standard without the need for
any additional hardware.
DC590+ Designed For
A World Market
The DC590+ is available with full
application and service support
in over fifty countries worldwide.
So wherever you are, you can
be confident of full backup and
support.
•
Support in over 50 countries
•
Multi-language menus
•
Function Block Programming
•
Input voltage ranges from 220-690V
(Special voltages available)
•
Software Configurable I/O
•
CE marked
•
UL and cUL listed through 500 HP
•
50/60Hz
•
AC line or DC armature contactor
•
AC line fuses
• High Resolution (12 bit) Analog Inputs
•
DC fuse
(regenerative version)
•
•
Control/field fuses
•
Provision for optional motor
blower starter
•
Provision for optional auxiliary
control transformer
Winder Control
– Open loop with inertia compensation
– Closed loop speed or current
– Load cell/dancer process PID
•
Math Functions
Saving You:
•
Logic Functions
•
Design time
•
Controlled Field Supply
•
Panel space
•
‘S’ Ramp and Digital Ramp
•
Component mounting and wiring
•
Component sourcing
•
Complexity
•
Time and cost
Motor Blower
Starter
DC Fuse
AC Line
Fuses
Control/Field Fuse
AC Line Contactor
Traditional DC
Drive Section
DC590+ DRV
equivalent, illustrating
panel space saving
and simplification of
panel wiring
DC590+ DRV version
Parker Worldwide
AE – UAE, Dubai
Tel: +971 4 8127100
parker.me@parker.com
FR – France, Contamine s/Arve
Tel: +33 (0)4 50 25 80 25
parker.france@parker.com
RO – Romania, Bucharest
Tel: +40 21 252 1382
parker.romania@parker.com
AR – Argentina, Buenos Aires
Tel: +54 3327 44 4129
GR – Greece, Athens
Tel: +30 210 933 6450
parker.greece@parker.com
RU – Russia, Moscow
Tel: +7 495 645-2156
parker.russia@parker.com
HK – Hong Kong
Tel: +852 2428 8008
SE – Sweden, Spånga
Tel: +46 (0)8 59 79 50 00
parker.sweden@parker.com
AT – Austria, Wiener Neustadt
Tel: +43 (0)2622 23501-0
parker.austria@parker.com
AT – Eastern Europe,
Wiener Neustadt
Tel: +43 (0)2622 23501 900
parker.easteurope@parker.com
AU – Australia, Castle Hill
Tel: +61 (0)2-9634 7777
AZ – Azerbaijan, Baku
Tel: +994 50 2233 458
parker.azerbaijan@parker.com
BE/LU – Belgium, Nivelles
Tel: +32 (0)67 280 900
parker.belgium@parker.com
BR – Brazil, Cachoeirinha RS
Tel: +55 51 3470 9144
BY – Belarus, Minsk
Tel: +375 17 209 9399
parker.belarus@parker.com
CA – Canada, Milton, Ontario
Tel: +1 905 693 3000
CH – Switzerland, Etoy
Tel: +41 (0)21 821 87 00
parker.switzerland@parker.com
CL – Chile, Santiago
Tel: +56 2 623 1216
CN – China, Shanghai
Tel: +86 21 2899 5000
HU – Hungary, Budapest
Tel: +36 1 220 4155
parker.hungary@parker.com
IE – Ireland, Dublin
Tel: +353 (0)1 466 6370
parker.ireland@parker.com
SK – Slovakia, Banská Bystrica
Tel: +421 484 162 252
parker.slovakia@parker.com
IN – India, Mumbai
Tel: +91 22 6513 7081-85
SL – Slovenia, Novo Mesto
Tel: +386 7 337 6650
parker.slovenia@parker.com
IT – Italy, Corsico (MI)
Tel: +39 02 45 19 21
parker.italy@parker.com
JP – Japan, Tokyo
Tel: +81 (0)3 6408 3901
KR – South Korea, Seoul
Tel: +82 2 559 0400
KZ – Kazakhstan, Almaty
Tel: +7 7272 505 800
parker.easteurope@parker.com
LV – Latvia, Riga
Tel: +371 6 745 2601
parker.latvia@parker.com
MX – Mexico, Apodaca
Tel: +52 81 8156 6000
MY – Malaysia, Shah Alam
Tel: +60 3 7849 0800
CZ – Czech Republic, Klecany
Tel: +420 284 083 111
parker.czechrepublic@parker.com
NL – The Netherlands,
Oldenzaal
Tel: +31 (0)541 585 000
parker.nl@parker.com
DE – Germany, Kaarst
Tel: +49 (0)2131 4016 0
parker.germany@parker.com
NO – Norway, Ski
Tel: +47 64 91 10 00
parker.norway@parker.com
DK – Denmark, Ballerup
Tel: +45 43 56 04 00
parker.denmark@parker.com
NZ – New Zealand, Mt Wellington
Tel: +64 9 574 1744
ES – Spain, Madrid
Tel: +34 902 330 001
parker.spain@parker.com
FI – Finland, Vantaa
Tel: +358 (0)20 753 2500
parker.finland@parker.com
SG – Singapore
Tel: +65 6887 6300
TH – Thailand, Bangkok
Tel: +662 717 8140
TR – Turkey, Istanbul
Tel: +90 216 4997081
parker.turkey@parker.com
TW – Taiwan, Taipei
Tel: +886 2 2298 8987
UA – Ukraine, Kiev
Tel +380 44 494 2731
parker.ukraine@parker.com
UK – United Kingdom,
Warwick
Tel: +44 (0)1926 317 878
parker.uk@parker.com
US – USA, Cleveland
Tel: +1 216 896 3000
VE – Venezuela, Caracas
Tel: +58 212 238 5422
ZA – South Africa,
Kempton Park
Tel: +27 (0)11 961 0700
parker.southafrica@parker.com
PL – Poland, Warsaw
Tel: +48 (0)22 573 24 00
parker.poland@parker.com
PT – Portugal, Leca da Palmeira
Tel: +351 22 999 7360
parker.portugal@parker.com
Parker Hannifin Corporation
SSD Drives Division
9225 Forsyth Park Dr.
Charlotte, NC 28273 USA
Tel: (704) 588-3246 Fax: (704) 588-3249
info.us.ssd@parker.com
www.parker.com/ssdusa
HA466595U001 Iss7
3/2013
©2013 Parker Hannifin Corporation