Miller Electric OM-222 Owner`s manual

OM-222 166W
2011−11
Processes
Induction Heating
Description
Induction Heating Power Source
ProHeat 35
[
CE And Non CE Models
Visit our website at
www.MillerWelds.com
File: Induction Heating
From Miller to You
Thank you and congratulations on choosing Miller. Now you can get
the job done and get it done right. We know you don’t have time to do
it any other way.
That’s why when Niels Miller first started building arc welders in 1929,
he made sure his products offered long-lasting value and superior
quality. Like you, his customers couldn’t afford anything less. Miller
products had to be more than the best they could be. They had to be the
best you could buy.
Today, the people that build and sell Miller products continue the
tradition. They’re just as committed to providing equipment and service
that meets the high standards of quality and value established in 1929.
This Owner’s Manual is designed to help you get the most out of your
Miller products. Please take time to read the Safety precautions. They
will help you protect yourself against potential hazards on the worksite.
We’ve made installation and operation quick
and easy. With Miller you can count on years
of reliable service with proper maintenance.
And if for some reason the unit needs repair,
there’s a Troubleshooting section that will
help you figure out what the problem is. The
Miller is the first welding parts list will then help you to decide the
equipment manufacturer in exact part you may need to fix the problem.
the U.S.A. to be registered to
the ISO 9001 Quality System Warranty and service information for your
Standard.
particular model are also provided.
Miller Electric manufactures a full line
of welders and welding related equipment.
For information on other quality Miller
products, contact your local Miller distributor to receive the latest full
line catalog or individual specification sheets. To locate your nearest
distributor or service agency call 1-800-4-A-Miller, or visit us at
www.MillerWelds.com on the web.
Mil_Thank 2009−09
Working as hard as you do
− every power source from
Miller is backed by the most
hassle-free warranty in the
business.
TABLE OF CONTENTS
SECTION 1 − SAFETY PRECAUTIONS − READ BEFORE USING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1. Symbol Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2. Induction Heating Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-3. Additional Symbols for Installation, Operation, and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-4. California Proposition 65 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-5. Principal Safety Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-6. EMF Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT UTILISATION . . . . . . . . . . . . . . . . . . . . . . . . . .
2-1. Signification des symboles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-2. Dangers relatifs au soudage à l’arc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-3. Dangers supplémentaires en relation avec l’installation, le fonctionnement et la maintenance . . . . .
2-4. Proposition californienne 65 Avertissements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-5. Principales normes de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
1
2
3
3
3
4
4
4
5
6
6
2-6. Informations relatives aux CEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 3 − DEFINITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-1. Warning Label Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-2. Warning Label Definitions (Continued) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-3. WEEE Label (For Products Sold Within The EU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-4. Symbols And Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 4 − INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1. Important Information Regarding CE Products (Sold Within The EU) . . . . . . . . . . . . . . . . . . . . . . . . . .
4-2. Serial Number and Rating Label Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-3. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-4. Selecting A Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-5. Tipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-6. Electrical Service Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-7. Connecting 3-Phase Input Power For 460/575 Volt Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-8. Connecting 3-Phase Input Power For 400/460 Volt IEC And CE Models . . . . . . . . . . . . . . . . . . . . . . .
4-9. Power Source Output Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-10. Remote 14 Receptacle RC14 Information and Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-11. Remote 14 Socket Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-12. Temperature Recorder Receptacle RC9 Information And Connections . . . . . . . . . . . . . . . . . . . . . . . .
4-13. Temperature Recorder Socket Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-14. Secondary Insulation Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-15. 115 Volt AC Duplex Receptacle And Supplementary Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-16. Locating Thermocouples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-17. Attaching Welded Thermocouples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-18. Using Contact Thermocouple Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 5 − COMPONENTS AND CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-1. Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 6 − SETUP AND OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-1. Safety Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-2. System Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-3. Important System Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-4. Power Source/System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-4-1.Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-5. Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
9
9
10
11
11
12
12
12
12
13
14
14
15
16
17
18
18
19
19
20
21
21
23
24
25
25
26
26
26
26
26
28
28
TABLE OF CONTENTS
SECTION 6 − SETUP AND OPERATION (Continued) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-5-1.Temperature-Based Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-5-1-1. Preheat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-5-1-2. Bake-Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-5-1-3. PWHT (Post-Weld Heat Treat) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-5-1-4. Custom Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-5-2.Manual Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-5-3.Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-5-4.Power vs Time Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-6. Run Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-6-1.Temperature Based Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-6-1-1. Preheat, Bake-Out And PWHT Run Status Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-6-1-2. Custom Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-6-2.Manual Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-6-3.Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-6-4.Power vs Time Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-7. Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-8. Cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-9. Real-Time Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-10. System Operating Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 7 − MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-1. Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-2. Calibration Verification Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-3. Calibration Verification Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-3-1.Initial Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-3-2.TC Input/Output Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-3-3.Finishing Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 8 − SAFETY PRECAUTIONS FOR SERVICING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-1. Symbol Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-2. Servicing Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-3. California Proposition 65 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-4. EMF Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 9 − DIAGNOSTICS & TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9-1. Operator Interface Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9-2. Limit Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9-3. Limit Condition Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9-4. Fault Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9-5. Fault Condition Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9-6. System Diagnostic Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9-7. Removing Wrapper and Measuring Input Capacitor Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9-8. Blowing Out Inside Of Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 10 − ELECTRICAL DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 11 − PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WARRANTY
26
28
28
29
29
30
34
34
34
35
35
35
35
36
36
36
36
37
37
40
41
41
42
42
42
42
42
46
46
46
47
47
48
48
49
49
50
50
51
53
54
56
58
DECLARATION OF CONFORMITY
for European Community (CE marked) products.
MILLER Electric Mfg. Co., 1635 Spencer Street, Appleton, WI 54914 U.S.A. declares that the
product(s) identified in this declaration conform to the essential requirements and provisions of
the stated Council Directive(s) and Standard(s).
Product/Apparatus Identification:
Product
Stock Number
PROHEAT 35 W/TEMPERATURE CONTROL
400­460V, CE
907432
Council Directives:
S
S
2006/95/EC Low Voltage
2004/108/EC Electromagnetic Compatibility
Standards:
S
S
IEC 60974­1: 2005 Arc Welding Equipment – Welding Power Sources
IEC 60974­10:2007 Arc Welding Equipment Electromagnetic Compatibility Requirements
Signatory:
October 26, 2010
_____________________________________
David A. Werba
MANAGER, PRODUCT DESIGN COMPLIANCE
240667C
_________________________________________
Date of Declaration
SECTION 1 − SAFETY PRECAUTIONS − READ BEFORE USING
ihom _2011-10
Protect yourself and others from injury — read, follow, and save these important safety precautions and operating instructions.
1-1. Symbol Usage
DANGER! − Indicates a hazardous situation which, if
not avoided, will result in death or serious injury. The
possible hazards are shown in the adjoining symbols
or explained in the text.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible
hazards are shown in the adjoining symbols or explained in the text.
NOTICE − Indicates statements not related to personal injury.
. Indicates special instructions.
This group of symbols means Warning! Watch Out! ELECTRIC
SHOCK, MOVING PARTS, and HOT PARTS hazards. Consult symbols and related instructions below for necessary actions to avoid the
hazards.
1-2. Induction Heating Hazards
The symbols shown below are used throughout this manual
to call attention to and identify possible hazards. When you
see the symbol, watch out, and follow the related instructions
to avoid the hazard. The safety information given below is
only a summary of the more complete safety information
found in the Safety Standards listed in Section 1-5. Read and
follow all Safety Standards.
Only qualified persons should install, operate, maintain, and
repair this unit.
During operation, keep everybody, especially children, away.
ELECTRIC SHOCK can kill.
Touching live electrical parts can cause fatal shocks
or severe burns. The power circuit and output bus
bars or connections are electrically live whenever
the output is on. The input power circuit and machine
internal circuits are also live when power is on. Incorrectly installed or
improperly grounded equipment is a hazard.
D
Do not touch live electrical parts.
D
Enclose any connecting bus bars and coolant fittings to prevent
unintentional contact.
Wear dry, hole-free insulating gloves and body protection.
Insulate yourself from work and ground using dry insulating mats or
covers big enough to prevent any physical contact with the work or
ground.
D
D
D Additional safety precautions are required when any of the following electrically hazardous conditions are present: in damp locations
or while wearing wet clothing; on metal structures such as floors,
gratings, or scaffolds; when in cramped positions such as sitting,
kneeling, or lying; or when there is a high risk of unavoidable or accidental contact with the workpiece or ground. For these
conditions, see ANSI Z49.1 listed in Safety Standards. And, do not
work alone!
D Disconnect input power before installing or servicing this equipment. Lockout/tagout input power according to OSHA 29 CFR
1910.147 (see Safety Standards).
D Use only nonconductive coolant hoses with a minimum length of 18
inches (457 mm) to provide isolation.
D Properly install, ground, and operate this equipment according to its
Owner’s Manual and national, state, and local codes.
D Always verify the supply ground − check and be sure that input power cord ground wire is properly connected to ground terminal in
disconnect box or that cord plug is connected to a properly grounded
receptacle outlet.
D
When making input connections, attach proper grounding
conductor first − double-check connections.
D
Keep cords dry, free of oil and grease, and protected from hot metal
and sparks.
Frequently inspect input power cord for damage or bare wiring − replace cord immediately if damaged − bare wiring can kill.
Turn off all equipment when not in use.
Do not use worn, damaged, undersized, or poorly spliced cables.
D
D
D
D
D
D
D
D
Do not drape cables over your body.
Do not touch power circuit if you are in contact with the work, ground,
or another power circuit from a different machine.
Use only well-maintained equipment. Repair or replace damaged
parts at once. Maintain unit according to manual.
Wear a safety harness if working above floor level.
Keep all panels and covers securely in place.
SIGNIFICANT DC VOLTAGE exists in inverter power
sources AFTER removal of input power.
D
Turn Off inverter, disconnect input power, and discharge input
capacitors according to instructions in Maintenance Section before
touching any internal parts.
FUMES AND GASES can be hazardous.
Induction Heating of certain materials, adhesives,
and fluxes can produce fumes and gases. Breathing
these fumes and gases can be hazardous to your
health.
D
D
D
D
D
D
D
Keep your head out of the fumes. Do not breathe the fumes.
If inside, ventilate the area and/or use local forced ventilation to remove fumes and gases.
If ventilation is poor, wear an approved air-supplied respirator.
Read and understand the Material Safety Data Sheets (MSDSs)
and the manufacturer’s instruction for adhesives, fluxes, metals,
consumables, coatings, cleaners, and degreasers.
Work in a confined space only if it is well ventilated, or while wearing
an air-supplied respirator. Always have a trained watchperson nearby. Fumes and gases from heating can displace air and lower the
oxygen level causing injury or death. Be sure the breathing air is
safe.
Do not heat in locations near degreasing, cleaning, or spraying operations. The heat can react with vapors to form highly toxic and
irritating gases.
Do not overheat coated metals, such as galvanized, lead, or
cadmium plated steel, unless the coating is removed from the
heated area, the area is well ventilated, and while wearing an airsupplied respirator. The coatings and any metals containing these
elements can give off toxic fumes if overheated. See coating MSDS
for temperature information.
OM-222 166 Page 1
FIRE OR EXPLOSION hazard.
D
D
D
D
D
INDUCTION HEATING can burn.
D Do not overheat parts.
D Watch for fire; keep extinguisher nearby.
D Keep flammables away from work area.
Do not locate unit on, over, or near combustible surfaces.
Do not install unit near flammables.
Do not operate where the atmosphere may contain flammable
dust, gas, or liquid vapors (such as gasoline).
After completion of work, inspect area to ensure it is free of
sparks, glowing embers, and flames.
D
D
D Do not touch hot parts bare-handed.
D Allow cooling period before handling parts or
equipment.
D Do not touch or handle induction head/coil
during operation.
Keep metal jewelry and other metal personal items away from
head/coil during operation.
To handle hot parts, use proper tools and/or wear heavy, insulated welding gloves and clothing to prevent burns.
Use only correct fuses or circuit breakers. Do not oversize or bypass them.
1-3. Additional Symbols for Installation, Operation, and Maintenance
FALLING EQUIPMENT can injure.
D Use handle and have person of adequate
physical strength lift unit.
D Move unit with hand cart or similar device.
D For units without a handle, use equipment of
adequate capacity to lift and support unit.
D Keep equipment (cables and cords) away from moving vehicles
when working from an aerial location.
D If using lift forks to move unit, be sure forks are long enough to
extend beyond opposite side of unit.
D Follow the guidelines in the Applications Manual for the Revised
NIOSH Lifting Equation (Publication No. 94−110) when manually lifting heavy parts or equipment.
FLYING METAL OR DIRT can injure eyes.
D Wear approved safety glasses with side
shields or wear face shield.
MOVING PARTS can injure.
D Keep away from moving parts such as fans.
D Keep all doors, panels, covers, and guards
closed and securely in place.
D Have only qualified persons remove doors, panels, covers, or
guards for maintenance and troubleshooting as necessary.
D Reinstall doors, panels, covers, or guards when maintenance is
finished and before reconnecting input power.
ELECTRIC AND MAGNETIC FIELDS (EMF)
can affect Implanted Medical Devices.
D Wearers of Pacemakers and other Implanted
Medical Devices should keep away.
D Implanted Medical Device wearers should consult their doctor
and the device manufacturer before going near arc welding, spot
welding, gouging, plasma arc cutting, or induction heating
operations.
OVERUSE can cause OVERHEATING
D Allow cooling period.
D Reduce output or reduce duty cycle before
starting to heat again.
D Follow rated duty cycle.
OM-222 166 Page 2
STATIC (ESD) can damage PC boards.
D Put on grounded wrist strap BEFORE handling
boards or parts.
D Use proper static-proof bags and boxes to
store, move, or ship PC boards.
H.F. RADIATION can cause interference.
D High-frequency (H.F.) can interfere with radio
navigation, safety services, computers, and
communications equipment.
D
D
D
D
D
Have only qualified person familiar with electronic equipment perform this installation.
The user is responsible for having a qualified electrician promptly
correct any interference problem resulting from the installation.
If notified by the FCC about interference, stop using the equipment at once.
Have the installation regularly checked and maintained.
Keep high-frequency source doors and panels tightly shut.
READ INSTRUCTIONS.
D Read and follow all labels and the Owner’s
Manual carefully before installing, operating, or
servicing unit. Read the safety information at
the beginning of the manual and in each
section.
D Use only genuine replacement parts from the manufacturer.
D Perform maintenance and service according to the Owner’s
Manuals, industry standards, and national, state, and local
codes.
BATTERY EXPLOSION can injure.
D Do not use induction equipment to charge batteries or jump start vehicles unless it has a battery charging feature designed for this purpose.
1-4. California Proposition 65 Warnings
Welding or cutting equipment produces fumes or gases
which contain chemicals known to the State of California to
cause birth defects and, in some cases, cancer. (California
Health & Safety Code Section 25249.5 et seq.)
This product contains chemicals, including lead, known to the
state of California to cause cancer, birth defects, or other reproductive harm. Wash hands after use.
1-5. Principal Safety Standards
Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,
is available as a free download from the American Welding Society at
http://www.aws.org or purchased from Global Engineering Documents
(phone: 1-877-413-5184, website: www.global.ihs.com).
Safety in Welding, Cutting, and Allied Processes, CSA Standard
W117.2, from Canadian Standards Association, Standards Sales, 5060
Spectrum Way, Suite 100, Ontario, Canada L4W 5NS (phone:
800-463-6727, website: www.csa-international.org).
OSHA, Occupational Safety and Health Standards for General Industry,
Title 29, Code of Federal Regulations (CFR), Part 1910, Subpart Q, and
Part 1926, Subpart J, from U.S. Government Printing Office, Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954
(phone: 1-866-512-1800) (there are 10 OSHA Regional Offices—phone
for Region 5, Chicago, is 312-353-2220, website: www.osha.gov).
National Electrical Code, NFPA Standard 70, from National Fire Protection Association, Quincy, MA 02269 (phone: 1-800-344-3555, website:
www.nfpa.org and www. sparky.org).
Canadian Electrical Code Part 1, CSA Standard C22.1, from Canadian
Standards Association, Standards Sales, 5060 Spectrum Way, Suite
100, Mississauga, Ontario, Canada L4W 5NS (phone: 800-463-6727,
website: www.csa-international.org).
Safe Practice For Occupational And Educational Eye And Face Protection, ANSI Standard Z87.1, from American National Standards Institute,
25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, website: www.ansi.org).
Applications Manual for the Revised NIOSH Lifting Equation, The National Institute for Occupational Safety and Health (NIOSH), 1600 Clifton
Rd, Atlanta, GA 30333 (phone: 1-800-232-4636, website: www.cdc.gov/
NIOSH).
1-6. EMF Information
Electric current flowing through any conductor causes localized electric
and magnetic fields (EMF). Welding current creates an EMF field around
the welding circuit and welding equipment. EMF fields may interfere with
some medical implants, e.g. pacemakers. Protective measures for persons wearing medical implants have to be taken. For example, restrict
access for passers−by or conduct individual risk assessment for welders. All welders should use the following procedures in order to minimize
exposure to EMF fields from the welding circuit:
4. Keep head and trunk as far away from the equipment in the welding circuit as possible.
1. Keep cables close together by twisting or taping them, or using a
cable cover.
About Implanted Medical Devices:
Implanted Medical Device wearers should consult their doctor and the
device manufacturer before performing or going near arc welding, spot
welding, gouging, plasma arc cutting, or induction heating operations. If
cleared by your doctor, then following the above procedures is recommended.
2. Do not place your body between welding cables. Arrange cables
to one side and away from the operator.
3. Do not coil or drape cables around your body.
5. Connect work clamp to workpiece as close to the weld as
possible.
6. Do not work next to, sit or lean on the welding power source.
7. Do not weld whilst carrying the welding power source or wire
feeder.
OM-222 166 Page 3
SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT
UTILISATION
ihom 2011−10_fre
Pour écarter les risques de blessure pour vous−même et pour autrui — lire, appliquer et ranger en lieu sûr ces consignes relatives
aux précautions de sécurité et au mode opératoire.
2-1. Signification des symboles
DANGER! − Indique une situation dangereuse qui si on
l’évite pas peut donner la mort ou des blessures graves.
Les dangers possibles sont montrés par les symboles
joints ou sont expliqués dans le texte.
Indique une situation dangereuse qui si on l’évite pas
peut donner la mort ou des blessures graves. Les dangers possibles sont montrés par les symboles joints ou
sont expliqués dans le texte.
NOTE − Indique des déclarations pas en relation avec des blessures
personnelles.
. Indique des instructions spécifiques.
Ce groupe de symboles veut dire Avertissement! Attention! DANGER
DE CHOC ELECTRIQUE, PIECES EN MOUVEMENT, et PIECES
CHAUDES. Consulter les symboles et les instructions ci-dessous y
afférant pour les actions nécessaires afin d’éviter le danger.
2-2. Dangers relatifs au soudage à l’arc
Les symboles présentés ci-après sont utilisés tout au long du
présent manuel pour attirer votre attention et identifier les risques de danger. Lorsque vous voyez un symbole, soyez
vigilant et suivez les directives mentionnées afin d’éviter tout
danger. Les consignes de sécurité présentées ci-après ne font
que résumer l’information contenue dans les normes de sécurité énumérées à la section 2-5. Veuillez lire et respecter toutes
ces normes de sécurité.
D
D
D
L’installation, l’utilisation, l’entretien et les réparations ne
doivent être confiés qu’à des personnes qualifiées.
D
Au cours de l’utilisation, tenir toute personne à l’écart et plus
particulièrement les enfants.
D
UNE DÉCHARGE ÉLECTRIQUE peut
entraîner la mort.
Le contact de composants électriques peut provoquer des accidents mortels ou des brûlures graves.
Le circuit électrique et les barres collectrices ou les
connexions de sortie sont sous tension lorsque
l’appareil fonctionne. Le circuit d’alimentation et les circuits internes
de la machine sont également sous tension lorsque l’alimentation est
sur marche. Des équipements installés ou reliés à la borne de terre de
manière incorrecte sont dangereux.
D
D
D
D
D
Installer le poste correctement et le mettre à la terre convenablement selon les consignes du manuel de l’opérateur et les normes
nationales, provinciales et locales.
Toujours vérifier la terre du cordon d’alimentation. Vérifier et s’assurer que le fil de terre du cordon d’alimentation est bien raccordé à la
borne de terre du sectionneur ou que la fiche du cordon est raccordée à une prise correctement mise à la terre.
En effectuant les raccordements d’entrée, fixer d’abord le conducteur de mise à la terre approprié et revérifier les connexions.
Les câbles doivent être exempts d’humidité, d’huile et de graisse;
protégez−les contre les étincelles et les pièces métalliques chaudes.
Vérifier fréquemment le cordon d’alimentation afin de s’assurer qu’il
n’est pas altéré ou à nu, le remplacer immédiatement s’il l’est. Un fil à
nu peut entraîner la mort.
L’équipement doit être hors tension lorsqu’il n’est pas utilisé.
Ne pas utiliser des câbles usés, endommagés, de grosseur insuffisante ou mal épissés.
Ne pas enrouler les câbles autour du corps.
Ne pas toucher le circuit électrique si l’on est en contact avec la pièce, la terre ou le circuit électrique d’une autre machine.
N’utiliser qu’un matériel en bon état. Réparer ou remplacer sur-lechamp les pièces endommagées. Entretenir l’appareil conformément à ce manuel.
Porter un harnais de sécurité si l’on doit travailler au-dessus du sol.
S’assurer que tous les panneaux et couvercles sont correctement
en place.
D
D
Ne pas toucher aux pièces électriques sous tension.
Protéger toutes les barres collectrices et les raccords de refroidissement pour éviter de les toucher par inadvertance.
D
D
D
Porter des gants isolants et des vêtements de protection secs et
sans trous.
S’isoler de la pièce à couper et du sol en utilisant des housses ou
des tapis assez grands afin d’éviter tout contact physique avec la
pièce à couper ou le sol.
Il reste une TENSION DC NON NÉGLIGEABLE dans
les sources de soudage onduleur UNE FOIS le
moteur coupé.
D
D
D
D
D’autres consignes de sécurité sont nécessaires dans les conditions suivantes : risques électriques dans un environnement
humide ou si l’on porte des vêtements mouillés ; sur des structures
métalliques telles que sols, grilles ou échafaudages ; en position
coincée comme assise, à genoux ou couchée ; ou s’il y a un risque
élevé de contact inévitable ou accidentel avec la pièce à souder ou
le sol. Dans ces conditions, voir ANSI Z49.1 énuméré dans les normes de sécurité. En outre, ne pas travailler seul !
Couper l’alimentation d’entrée avant d’installer l’appareil ou d’effectuer l’entretien. Verrouiller ou étiqueter la sortie d’alimentation selon
la norme OSHA 29 CFR 1910.147(se reporter aux Principales normes de sécurité).
N’utiliser que des tuyaux de refroidissement non conducteurs ayant
une longueur minimale de 457 mm pour garantir l’isolation.
D
Avant de toucher des organes internes, couper l’onduleur,
débrancher l’alimentation et décharger les condensateurs
d’alimentation conformément aux instructions indiquées dans la
partie maintenance.
LES FUMÉES ET LES GAZ peuvent
être dangereux.
Le chauffage à induction de certains matériaux,
adhésifs et flux génère des fumées et des gaz. Leur
inhalation peut être dangereuse pour votre santé.
D
Ne pas mettre sa tête au-dessus des vapeurs. Ne pas respirer ces
vapeurs.
OM-222 166 Page 4
D
À l’intérieur, ventiler la zone et/ou utiliser une ventilation forcée au
niveau de l’arc pour l’évacuation des fumées et des gaz.
D
Si la ventilation est médiocre, porter un respirateur anti-vapeurs approuvé.
Lire et comprendre les spécifications de sécurité des matériaux
(MSDS) et les instructions du fabricant concernant les adhésifs, les
flux, les métaux, les consommables, les revêtements, les nettoyants et les dégraisseurs.
D
D
D
D
Travailler dans un espace fermé seulement s’il est bien ventilé ou en
portant un respirateur. Demander toujours à un surveillant dûment
formé de se tenir à proximité. Des fumées et des gaz provenant du
chauffage peuvent déplacer l’air, abaisser le niveau d’oxygène et
provoquer des lésions ou des accidents mortels. S’assurer que l’air
ambiant ne présente aucun danger.
Ne pas chauffer dans des endroits se trouvant à proximité d’opérations de dégraissage, de nettoyage ou de pulvérisation. La chaleur
peut réagir en présence de vapeurs et former des gaz hautement
toxiques et irritants.
Ne pas surchauffer des métaux munis d’un revêtement tels que
l’acier galvanisé, plaqué au plomb ou au cadmium, à moins que le
revêtement ne soit enlevé de la zone chauffée, que la zone soit bien
ventilée et, si nécessaire, en portant un respirateur. Les revêtements et tous les métaux contenant ces éléments peuvent dégager
des fumées toxiques s’ils sont surchauffés. Voir les informations
concernant la température dans les spécifications de revêtement
MSDS.
Risque D’INCENDIE OU D’EXPLOSION.
D
D
D
D
D
D
Stocker des produits inflammables hors de la zone de travail.
Ne pas placer l’appareil sur, au-dessus ou à proximité de surfaces
inflammables.
Ne pas installer l’appareil à proximité de produits inflammables.
Ne pas faire fonctionner l’appareil si l’air ambiant est chargé de particules, gaz, ou vapeurs inflammables (vapeur d’essence, par
exemple).
Une fois le travail achevé, assurez−vous qu’il ne reste aucune trace
d’étincelles incandescentes ni de flammes.
Utiliser exclusivement des fusibles ou coupe−circuits appropriés.
Ne pas augmenter leur puissance; ne pas les ponter.
LE CHAUFFAGE PAR INDUCTION peut
provoquer des brûlures.
D Ne pas toucher des parties chaudes à mains
nues.
D Laisser refroidir les composants ou équipements avant de les manipuler.
D
Ne pas toucher ou manipuler la tête/l’enroulement à induction pendant le fonctionnement.
D
Tenir les bijoux et autres objets personnels en métal éloignés de la
tête/de l’enroulement pendant le fonctionnement.
Ne pas toucher aux pièces chaudes, utiliser les outils recommandés et porter des gants de soudage et des vêtements épais
pour éviter les brûlures.
D
D Ne pas surchauffer les composants .
D Attention aux risques d’incendie: tenir un extincteur à proximité.
2-3. Dangers supplémentaires en relation avec l’installation, le fonctionnement et la
maintenance
LA CHUTE DE L’ÉQUIPEMENT peut
provoquer des blessures.
D
D
D
D
D Utiliser la poignée et demander à une personne
ayant la force physique nécessaire pour soulever l’appareil.
D Déplacer l’appareil à l’aide d’un chariot ou d’un
engin similaire.
Pour les unités sans poignée, utiliser un équipement de levage de
capacité suffisante pour lever l’appareil.
Tenir l’équipement (câbles et cordons) à distance des véhicules
mobiles lors de toute opération en hauteur.
En utilisant des fourches de levage pour déplacer l’unité, s’assurer que les fourches sont suffisamment longues pour dépasser du
côté opposé de l’appareil.
Suivre les consignes du Manuel des applications pour l’équation
de levage NIOSH révisée (Publication Nº94−110) lors du levage
manuelle de pièces ou équipements lourds.
DES ORGANES MOBILES peuvent
provoquer des blessures.
D S’abstenir de toucher des organes mobiles tels
que des ventilateurs.
D Maintenir fermés et verrouillés les portes, panneaux, recouvrements et dispositifs de protection.
Les CHAMPS ÉLECTROMAGNÉTIQUES (CEM)
peuvent affecter les implants médicaux.
D Les porteurs de stimulateurs cardiaques et
autres implants médicaux doivent rester à
distance.
D Les porteurs d’implants médicaux doivent consulter leur
médecin et le fabricant du dispositif avant de s’approcher de la
zone où se déroule du soudage à l’arc, du soudage par points, du
gougeage, de la découpe plasma ou une opération de chauffage
par induction.
DES PIECES DE METAL ou DES
SALETES peuvent provoquer des
blessures dans les yeux.
D Porter des lunettes de sécurité à coques latérales ou un écran facial.
OM-222 166 Page 5
L’EMPLOI EXCESSIF peut
CHAUFFER L’ÉQUIPEMENT.
D
SUR-
D Prévoir une période de refroidissement
D Réduire le courant de sortie ou le facteur de marche avant de recommencer le chauffage.
Respecter le cycle opératoire nominal.
LES CHARGES ÉLECTROSTATIQUES
peuvent endommager les circuits imprimés.
D Établir la connexion avec la barrette de terre
AVANT de manipuler des cartes ou des pièces.
D Utiliser des pochettes et des boîtes antistatiques pour stocker, déplacer ou expédier des
cartes PC.
D
D
L’utilisateur est tenu de faire corriger rapidement par un électricien
qualifié les interférences résultant de l’installation.
D
Si le FCC signale des interférences, arrêter immédiatement l’appareil.
Effectuer régulièrement le contrôle et l’entretien de l’installation.
Maintenir soigneusement fermés les portes et les panneaux des
sources de haute fréquence.
D
D
LIRE LES INSTRUCTIONS.
D Lire et appliquer les instructions sur les
étiquettes et le Mode d’emploi avant
l’installation, l’utilisation ou l’entretien de
l’appareil. Lire les informations de sécurité au
début du manuel et dans chaque section.
D N’utiliser que les pièces de rechange recommandées par le
constructeur.
D Effectuer l’entretien en respectant les manuels d’utilisation,
les normes industrielles et les codes nationaux, d’état et locaux.
LE RAYONNEMENT HAUTE FRÉQUENCE (HF) risque de provoquer
des interférences.
L’EXPLOSION DE LA BATTERIE
peut provoquer des blessures.
D Le rayonnement haute fréquence (HF) peut
provoquer des interférences avec les équipements de radio-navigation et de communication,
les services de sécurité et les ordinateurs.
D Ne pas utiliser l’appareil de soudage pour
charger des batteries ou faire démarrer
des véhicules à l’aide de câbles de démarrage,
sauf si l’appareil dispose d’une fonctionnalité
de charge de batterie destinée à cet usage.
Demander seulement à des personnes qualifiées familiarisées
avec des équipements électroniques de faire fonctionner l’installation.
2-4. Proposition californienne 65 Avertissements
Les équipements de soudage et de coupage produisent des
fumées et des gaz qui contiennent des produits chimiques
dont l’État de Californie reconnaît qu’ils provoquent des malformations congénitales et, dans certains cas, des cancers.
(Code de santé et de sécurité de Californie, chapitre 25249.5
et suivants).
Ce produit contient des éléments chimiques, dont le plomb,
reconnus par l’État de Californie pour leur caractère
cancérogène ainsi que provoquant des malformations
congénitales ou autres problèmes de procréation. Se laver les
mains après toute manipulation.
2-5. Principales normes de sécurité
Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,
from Global Engineering Documents (phone: 1-877-413-5184, website:
www.global.ihs.com).
Safety in Welding, Cutting, and Allied Processes, CSA Standard
W117.2, from Canadian Standards Association, Standards Sales, 5060
Spectrum Way, Suite 100, Ontario, Canada L4W 5NS (phone:
800-463-6727, website: www.csa-international.org).
OSHA, Occupational Safety and Health Standards for General Industry,
Title 29, Code of Federal Regulations (CFR), Part 1910, Subpart Q, and
Part 1926, Subpart J, from U.S. Government Printing Office, Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954
(phone: 1-866-512-1800) (there are 10 OSHA Regional Offices—phone
for Region 5, Chicago, is 312-353-2220, website: www.osha.gov).
National Electrical Code, NFPA Standard 70, from National Fire Protection Association, Quincy, MA 02269 (phone: 1-800-344-3555, website:
www.nfpa.org and www. sparky.org).
Canadian Electrical Code Part 1, CSA Standard C22.1, from Canadian
Standards Association, Standards Sales, 5060 Spectrum Way, Suite
100, Mississauga, Ontario, Canada L4W 5NS (phone: 800-463-6727,
website: www.csa-international.org).
Safe Practice For Occupational And Educational Eye And Face Protection, ANSI Standard Z87.1, from American National Standards Institute,
25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, website: www.ansi.org).
Applications Manual for the Revised NIOSH Lifting Equation, The National Institute for Occupational Safety and Health (NIOSH), 1600 Clifton
Rd, Atlanta, GA 30333 (phone: 1-800-232-4636, website: www.cdc.gov/
NIOSH).
OM-222 166 Page 6
2-6. Informations relatives aux CEM
Le courant électrique qui traverse tout conducteur génère des champs
électromagnétiques (CEM) à certains endroits. Le courant de soudage
crée un CEM autour du circuit et du matériel de soudage. Les CEM
peuvent créer des interférences avec certains implants médicaux
comme des stimulateurs cardiaques. Des mesures de protection pour
les porteurs d’implants médicaux doivent être prises: Limiter par
exemple tout accès aux passants ou procéder à une évaluation des
risques individuels pour les soudeurs. Tous les soudeurs doivent
appliquer les procédures suivantes pour minimiser l’exposition aux
CEM provenant du circuit de soudage:
1. Rassembler les câbles en les torsadant ou en les attachant avec
du ruban adhésif ou avec une housse.
2. Ne pas se tenir au milieu des câbles de soudage. Disposer les
câbles d’un côté et à distance de l’opérateur.
3. Ne pas courber et ne pas entourer les câbles autour de votre
corps.
4. Maintenir la tête et le torse aussi loin que possible du matériel du
circuit de soudage.
5. Connecter la pince sur la pièce aussi près que possible de la
soudure.
6. Ne pas travailler à proximité d’une source de soudage, ni
s’asseoir ou se pencher dessus.
7. Ne pas souder tout en portant la source de soudage ou le
dévidoir.
En ce qui concerne les implants médicaux :
Les porteurs d’implants doivent d’abord consulter leur médecin avant de
s’approcher des opérations de soudage à l’arc, de soudage par points,
de gougeage, du coupage plasma ou de chauffage par induction. Si le
médecin approuve, il est recommandé de suivre les procédures précédentes.
OM-222 166 Page 7
OM-222 166 Page 8
SECTION 3 − DEFINITIONS
3-1. Warning Label Definitions
Warning! Watch Out! There are
possible hazards as shown by the
symbols.
1
1.1
1.2
2
2.1
2.2
3
3.1
3.2
4
4.1
4.2
4.3
5
5.1
6
7
Electric shock from wiring can
kill.
Wear dry insulating gloves.
Do not wear wet or damaged
gloves.
Disconnect input plug or
power before working on
machine.
Induction heating can cause
injury or burns from hot items
such as rings, watches, or
parts.
Do not wear metal jewelry and
other metal personal items
such as rings and watches
during operation.
Do not touch hot parts or hot
head/coil.
Induction heating sparks can
cause fire. Do not overheat
parts and adhesives.
Keep flammables away from
heating operation. Do not heat
near flammables.
Heating sparks can cause
fires. Have a fire extinguisher
nearby and have a
watchperson ready to use it.
Breathing heating fumes can
be hazardous to your health.
Read Material Safety Data
Sheets (MSDSs) and
manufacturer’s instructions for
material used.
Keep your head out of the
fumes.
Use forced ventilation or local
exhaust to remove the fumes.
Use ventilating fan to remove
fumes.
Always wear safety glasses
or goggles during and around
heating operations to prevent
possible injury.
Wear either safety glasses or
full goggles depending on
type of operation and nearby
processes.
Do not remove or paint over
(cover) the label.
Become trained and read the
instructions before working on
the machine or heating.
190 025
OM-222 166 Page 9
3-2. Warning Label Definitions (Continued)
1
2
1
3
2
3
4
5
6
5
4
7
Warning! Watch Out! There
are possible hazards as
shown by the symbols.
Electric shock from wiring can
kill.
Overuse can cause
overheating. Follow rated duty
cycle.
Disconnect input plug or
power before working on
machine.
Become trained and read the
instructions before working on
the machine.
Connect green or
green/yellow grounding
conductor to ground terminal.
Connect input conductors (L1,
L2 And L3) to line terminals.
6
7
194 466
1
2
1
2
3
4
3
4
Warning! Watch Out! There
are possible hazards as
shown by the symbols.
Electric shock from wiring can
kill.
Disconnect input plug or
power before working on
machine.
Do not touch input
capacitor(s). Allow time for
capacitor(s) to discharge.
Check input capacitor(s)
voltage (see Section 9-7).
227 085-A
OM-222 166 Page 10
3-3. WEEE Label (For Products Sold Within The EU)
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical
and Electronic Equipment (WEEE)
by disposing at a designated collection facility.
Contact your local recycling office
or your local distributor for further
information.
3-4. Symbols And Definitions
. Some symbols are found only on CE products.
A
IP
Amperes
Degree Of
Protection
V
Hz
Increase
Volts
Alternating Current
Hertz
Circuit Protection
Line Connection
I1
Primary Current
X
Duty Cycle
Output
I2
Rated Current
U1
Primary Voltage
U2
Load Voltage
Read Instructions
Three Phase Static
Frequency Converter-Transformer-Frequency Converter
I1max
Rated Maximum
Supply Current
P1max
Maximum Power
Consumption
Three Phase
Percent
Remote
Panel/Local
High Temperature
Voltage Input
Off
On
OM-222 166 Page 11
SECTION 4 − INSTALLATION
4-1. Important Information Regarding CE Products (Sold Within The EU)
Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There may be potential difficulties in ensuring electromagnetic compatibility in those locations, due to
conducted as well as radiated disturbances.
This equipment complies with IEC 61000−3−12 provided that the short−circuit power Ssc is greater than or equal to 8,911,817 at the interface
point between the user’s supply and the public system. It is the responsibility of the installer or user of the equipment to ensure, by consultation
with the distribution network operator if necessary, that the equipment is connected only to a supply with a short−circuit power Ssc greater than
or equal to 8,911,817.
4-2. Serial Number and Rating Label Location
The serial number and rating information for the power source is located on the front of the machine. Use the rating labels to determine input power
requirements and/or rated output. For future reference, write serial number in space provided on back cover of this manual.
4-3. Specifications
Output
Frequen
cy
5 To 30
kHz
Rated Output
Single
Output
Dual
Output
35 kW At
100%
Duty
Cycle
350 A
(RMS),
700 V
(RMS)
35 kW At
100%
Duty
Cycle
700 A
(RMS),
700 V
(RMS)
Required
Reflective
Inductance
Amperes Input at
Rated Load Output
50 or 60 Hz,
Three-Phase
400 V
2.5 To 50
h
60 A
Storage Temperature Range −40_ F (−40_ C) to 122_ F (50_ C)
*While idling
OM-222 166 Page 12
460 V
50 A
575 V
40 A
kVA
39
Overall
Dimensions
Weight
IP
Rating
Length: 36-3/4 in.
(993 mm)
Width: 21-1/2 in.
(546 mm)
Height: 29 in.
(737 mm)
227 lb
(103 kg)
23CM
kW
37
4-4. Selecting A Location
1
2
Lifting Eye
Lifting Forks
Use lifting eye or lifting forks to
move unit.
Movement
If using lifting forks, extend forks
beyond opposite side of unit.
3
Line Disconnect Device
Locate unit near correct input
power supply.
1
!
Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
OR
2
Location And Airflow
3
12 in.
(305 mm)
18 in.
(460 mm)
12 in.
(305 mm)
18 in.
(460 mm)
803 992-B
OM-222 166 Page 13
4-5. Tipping
!
Do not move or operate unit
where it could tip.
4-6. Electrical Service Guide
Failure to follow these electrical service guide recommendations could create an electric shock or fire hazard. These recommendations are for a dedicated circuit sized for the rated output and duty cycle of the welding power source.
In dedicated circuit installations, the National Electrical Code (NEC) allows the receptacle or conductor rating to be less than the rating
of the circuit protection device. All components of the circuit must be physically compatible. See NEC articles 210.21, 630.11, and
630.12.
50 Hz
Three
Phase
60 Hz Three Phase
Input Voltage (V)
400
460
575
Input Amperes (A) At Rated Output
60
50
40
70
61
45
80
70
60
6
8
8
254
(77)
214
(65)
334
(102)
8
8
10
Max Recommended Standard Fuse Or Circuit Breaker Rating In Amperes 1
Circuit Breaker 1, Time-Delay Fuses 2
Normal Operating Fuses3
Min Input Conductor Size In AWG
4
Max Recommended Input Conductor Length In Feet (Meters)
Min Grounding Conductor Size In AWG 4
Reference: 2011 National Electrical Code (NEC) (including article 630)
1 If a circuit breaker is used in place of a fuse, choose a circuit breaker with time-current curves comparable to the recommended fuse.
2 “Time-Delay” fuses are UL class “RK5” . See UL 248.
3 “Normal Operating” (general purpose - no intentional delay) fuses are UL class “K5” (up to and including 60 amps), and UL class “H” ( 65 amps and
above).
4 Conductor data in this section specifies conductor size (excluding flexible cord or cable) between the panelboard and the equipment per NEC Table
310.15(B)(16). If a flexible cord or cable is used, minimum conductor size may increase. See NEC Table 400.5(A) for flexible cord and cable
requirements.
OM-222 166 Page 14
4-7. Connecting 3-Phase Input Power For 460/575 Volt Models
GND/PE Earth Ground
3
!
Installation must meet all National
and Local Codes − have only qualified persons make this installation.
!
Disconnect and lockout/tagout input power before connecting input
conductors from unit.
!
Make input power connections to
the welding power source first.
!
Always connect green or green/
yellow conductor to supply
grounding terminal first, and never
to a line terminal.
8
7
. The circuitry in this unit automatically
adapts the power source to the
primary voltage being applied. Check
input voltage available at site. This
unit can be connected to either 460 or
575 VAC input power.
10 See rating label on unit and check input
voltage available at site.
1 Input Power Conductors (Customer
9
Supplied Cord)
Select size and length of conductors using
Section 4-6. Conductors must comply with
national, state, and local electrical codes.
If applicable, use lugs of proper amperage
capacity and correct hole size.
Welding Power Source Input Power
Connections
2 Strain Relief
4
6
Route conductors (cord) through strain relief and tighten screws.
3
4
Machine Grounding Terminal
Green Or Green/Yellow Grounding
Conductor
Connect green or green/yellow grounding
conductor to welding power source
grounding terminal first.
5 Welding Power Source Line
Terminals
6 Input Conductors L1 (U), L2 (V) And
L3 (W)
Connect input conductors L1 (U), L2 (V)
and L3 (W) to welding power source line
terminals.
Close and secure access door on welding
power source.
Disconnect Device Input Power
Connections
7 Disconnect Device (switch shown in
OFF position)
8 Disconnect Device (Supply)
Grounding Terminal
Connect green or green/yellow grounding
conductor to disconnect device grounding
terminal first.
9 Disconnect Device Line Terminals
Connect input conductors L1 (U), L2 (V)
And L3 (W) to disconnect device line
terminals.
10 Over-Current Protection
Select type and size of over-current
protection using Section 4-6 (fused disconnect switch shown).
Close and secure door on line disconnect
device. Remove lockout/tagout device,
and place switch in the On position.
1
2
6
5
3
4
Tools Needed:
3/8 in.
803 994-C
OM-222 166 Page 15
4-8. Connecting 3-Phase Input Power For 400/460 Volt IEC And CE Models
Tools Needed:
3/8 in.
3
= GND/PE Earth Ground
8
10
7
L1
4
L2
L3
9
6
5
3
4
!
Installation must meet all National and
Local Codes − have only qualified persons make this installation.
!
Disconnect and lockout/tagout input
power before connecting input conductors from unit.
Ref. 804 430-A
Select size and length of conductors using
Section 4-6. Conductors must comply with
national, state, and local electrical codes. If
applicable, use lugs of proper amperage
capacity and correct hole size.
Disconnect Device Input Power Connections
7
Disconnect Device (switch shown in
OFF position)
Welding Power Source Input Power Connections
8
Disconnect Device (Supply) Grounding
Terminal
Make input power connections to the
welding power source first.
2
!
Always connect green or green/yellow
conductor to supply grounding terminal first, and never to a line terminal.
3
4
Strain Relief
Route conductors (cord) through strain relief
and tighten screws.
Machine Grounding Terminal
Green Or Green/Yellow Grounding
Conductor
circuitry in this unit automatically
adapts the power source to the primary
voltage being applied. Check input
voltage available at site. This unit can be
connected to either 400 or 460 VAC input
power.
Connect green or green/yellow grounding
conductor to welding power source grounding
terminal first.
See rating label on unit and check input voltage available at site.
Connect input conductors L1 (U), L2 (V) and
L3 (W) to welding power source line terminals.
1
Close and secure access door on welding
power source.
Input Power Conductors (Customer
Supplied Cord)
OM-222 166 Page 16
1
2
!
. The
6
5
6
Welding Power Source Line Terminals
Input Conductors L1 (U), L2 (V) And L3
(W)
Connect green or green/yellow grounding
conductor to disconnect device grounding terminal first.
9
Disconnect Device Line Terminals
Connect input conductors L1 (U), L2 (V) And
L3 (W) to disconnect device line terminals.
10 Over-Current Protection
Select type and size of over-current protection
using Section 4-6 (fused disconnect switch
shown).
Close and secure door on line disconnect device. Remove lockout/tagout device, and
place switch in the On position.
4-9. Power Source Output Connections
2
1
Dual Air-Cooled
Output Connection
2
1
2
1
4
4
Dual Liquid-Cooled
Output Connection
2
Single Air-Cooled
Output Connection
2
Single Liquid-Cooled
Output Connection
2
1
5
1
5
1
5
3
4
3
Ref. 803 993-C / Ref. 804 217-A
1
Output Connector 1
Single Air-Cooled Output Connection
2
Output Connector 2
3
Protective Plug
Connect air-cooled output extension cable
to Output Connector 1 or Output
Connector 2. Connect Protective Plug to
remaining Output Connector.
4
Air-Cooled Extension Cable
Single Liquid-Cooled Output Connection
5
Liquid-Cooled Extension Cable
Connect liquid-cooled output extension
cable to Output Connector 1 or Output
Connector 2. Connect Protective Plug to
remaining Output Connector.
The power source is capable of single or
dual output. When connected for single
power output, up to 35 kW is available at
the single output connection. When
connected for dual power, output power is
divided between the two output
connections.
!
Do not move or disconnect cables
while output is on.
. Blankets must be the same size.
Dual Liquid-Cooled Output Connection
Connect liquid-cooled output extension
cables to Output Connector 1 and Output
Connector 2.
. Extension cables must be the same
length: 10 ft (3 m), 25 ft (7.6 m), or 50
ft (15.2 m).
Dual Air-Cooled Output Connection
. Heating
Connect air-cooled output extension
cables to Output Connector 1 and Output
Connector 2.
. Total length of heating and extension
. Extension cables must be the same
length: 25 ft (7.6 m), 50 ft (15.2 m), or
75 ft (22.8 m).
cables must be the same
length: 30ft (9.1 m), 50 ft (15.2 m), 80ft
(24.2 m), or 140 ft (42.7 m).
cables must not exceed 360 ft (110 m).
The extension cable is counted twice
the length because it has a supply and
return hose.
OM-222 166 Page 17
4-10. Remote 14 Receptacle RC14 Information and Connections
3
A
B
2
K
C L N
D M
1
E
J
1
2
3
4
Plug
Threaded Collar
Keyway
Remote 14 Receptacle RC14
(See Section 4-11)
To connect to receptacle, align keyway, insert plug and tighten
threaded collar.
4
I
H
F
G
2
1
803 993-C
4-11. Remote 14 Socket Information
Socket
A
B
Socket Information
Remote Contactor
E
Remote Output Control
Control circuit common.
Input command signal (potentiometer wiper or 0 to +10 volts DC).
Not used.
G
F, J
Contact closure to A completes 24 volts DC contactor control circuit.
Command reference; +10 volts DC.
C
D
+24 volts DC.
Power Source Fault
Absence of internal contact closure between F and J signals power source fault to remote control device (an external power source must be used).
H
Not used.
I
Actual frequency output signal (1 volt/10 kHz).
L
M
Remote Metering
Average power output signal (1 volt/10 kW).
Voltage output signal RMS (1 volt/100 volts).
N
Total current output signal RMS (1 volt/100 amperes).
K
Chassis common.
OM-222 166 Page 18
4-12. Temperature Recorder Receptacle RC9 Information And Connections
3
2
1
2
3
Plug
Threaded Collar
Temperature Recorder
Receptacle RC9 (See Section
4-13)
To connect to receptacle, insert
plug and tighten threaded collar.
1
2
1
803 993-C
4-13. Temperature Recorder Socket Information
Socket No.
Socket Information
1
Thermocouple No. 1 (TC1), 0-10 volt DC signal [0V = −50 F (−46 C), 10V = 1500 F (816
C)]
2
Thermocouple No. 2 (TC2), 0-10 volt DC signal [0V = −50 F (−46 C), 10V = 1500 F (816
C)]
3
Thermocouple No. 3 (TC3), 0-10 volt DC signal [0V = −50 F (−46 C), 10V = 1500 F (816
C)]
4
Thermocouple No. 4 (TC4), 0-10 volt DC signal [0V = −50 F (−46 C), 10V = 1500 F (816
C)]
5
Signal Common
6
Thermocouple No. 5 (TC5), 0-10 volt DC signal [0V = −50 F (−46 C), 10V = 1500 F (816
C)]
7
Thermocouple No. 6 (TC6), 0-10 volt DC signal [0V = −50 F (−46 C), 10V = 1500 F (816
C)]
8
Unused
9
Unused
10
Chassis Ground
11
Unused
12
Unused
13
Unused
14
Unused
* The voltage to temperature calculation is:
(DC Volts Out x 155) − 50 = F
(DC Volts Out x 86.1) − 45.4 = C
The ProHeat display should read 6 F or 3.3 C.
OM-222 166 Page 19
4-14. Secondary Insulation Protection
!
Connect supplied ground
lead(s)
between
the
workpiece and power source
to provide proper secondary
insulation protection from a
short in the output circuit.
For single output, only one
ground lead is required. For
dual output , use both ground
leads.
Secondary insulation protection
circuitry automatically shuts down
the power source output if a
potentially hazardous condition
exists at the heating device
connected to the power source (e.g.
insulation has broken down on a
heating blanket causing the
conductor to come into contact with
the workpiece or a heating coil
touches the workpiece causing a
short in the output circuit).
1
2
Receptacles
Plug
To connect plug, align key with keyway, insert end into receptacle, and
rotate plug until tight.
3
4
Handle
Magnet
. The secondary isolation magnet
must be in contact with bare
metal (free from rust, paint,
grease, etc.).
5
1
Workpiece
Use handle to place magnet on the
workpiece.
2
3
5
4
803 994-B / Ref. 801 826-C / Ref. 801 828-C
OM-222 166 Page 20
4-15. 115 Volt AC Duplex Receptacle And Supplementary Protector
1
2
115 VAC 2.5 A Single-Phase
AC Receptacle RC1
Supplementary Protector CB1
(2.5 A)
The receptacle supplies nominal 115
volts AC auxiliary power for use with
the optional digital recorder. Maximum output from receptacle is 2.5
amperes.
1
2
1
CB1 protects 115 volt receptacle
RC1 from overload. If CB1 opens,
RC1 does not work.
2
803 993-C
4-16. Locating Thermocouples
Thermocouple location is one of the most critical steps in the Heat Treatment Operation.
Thermocouples shall be located as follows to provide a survey of heating uniformly and enable time and temperature control:
1.
Locate thermocouples to ensure that the full area of the heat band is monitored.
S
The code normally specifies the number of thermocouples to be used based on the pipe diameter.
S
The control thermocouple is placed in the plane of the weld (center of the heat zone).
S The control thermocouple is placed at the top of the pipe in a standard pipe joint configuration. In other
applications, the thermocouple should be located in the hottest portion of the weldment to be stress relieved.
2.
Consider all nozzles and other welded attachments that cause potential heat sinks through metal mass or cold spots due to heat convection or
conduction, and have additional thermocouples applied.
3.
Attach a spare thermocouple beside control thermocouples.
4.
Attach thermocouples to ensure uniformity of temperature in both thin and thick workpieces.
5.
Physically inspect all thermocouples for continuity and mark them by an identification number corresponding to the recorder channel.
6.
Match the drawings of the workpiece indicating the numerous thermocouple locations, controlling thermocouple locations, etc. to weld identification information.
7.
The system is equipped with 3-pin thermocouple connections at the front of the unit. Six thermocouples can be attached to the power source.
S The system is equipped with 3-pin connectors to accommodate shielded extension cables. The shielded
cables protect from electrical interference.
8.
Type K thermocouple wire has a positive and negative wire. The positive wire is marked as solid yellow or striped yellow. The connector screw
terminals are marked positive and negative. Be sure to attach the wire to the connector with proper polarity.
OM-222 166 Page 21
9.
The following describes the thermocouple routing from work to power source.
S
Type K thermocouple wire (two wire) is attached directly to the workpiece using a
Thermocouple Attachment Unit (see next section for information on attaching thermocouples).
S
The other end is fitted with a 2-pin type K connector.
S
The 2-pin connector plugs into the 3-pin composite extension cable. The extension cable has a six-channel block of 3-pin female
connectors. The pin size locates the position of the 2-pin connector on the extension.
S
The extension cable contains six, 3-wire bundles of shielded cable.
S
The 3-pin male extension cable plugs into the 3-pin female connector on the front of the power source.
1
3
4
2
804 320-A
For temperature control mode, the power
source must have (as a minimum) one
thermocouple connected to receptacle
TC1. If multiple thermocouples are desired,
either use individual thermocouple plugs or
the thermocouple extension cable.
To connect thermocouples to the power
source, proceed as follows:
OM-222 166 Page 22
. Do NOT weld thermocouples to workpiece while thermocouple cable is connected to the power source.
Turn Off power source.
1
Power Source
2
Thermocouple Receptacles
3
Individual Thermocouple Extension
Cable
4
Multiple Thermocouple Extension
Cable
Align plug pin(s) with receptacle socket(s)
and push plug into receptacle.
4-17. Attaching Welded Thermocouples
. Do NOT weld thermocouples while connected to power source.
1.
Attach thermocouples using a portable Thermocouple Attachment Unit (TAU). This unit spot welds thermocouple wire directly to the
workpiece. This method of thermocouple attachment ensures accurate temperature measurement.
2.
Clean (file or grind) any loose scale or rust from the workpiece at the places where the wires will be attached.
3.
Clean the location for the lead magnet to minimize resistance. Place the magnet as near to the thermocouple positions as possible.
4.
Strip 1/4 in. of insulation from the thermocouple wires.
5.
Set the output variable control of the TAU to about eighty percent (80%).
6.
Grasp one of the stripped wires with the tip of the jaws of the application pliers.
. Don’t touch both wires of the thermocouple to the pliers at the same time when energizing the Thermocouple Attachment Unit. This will cause
the thermocouple wire to fuse to the pliers, rather than the workpiece.
7.
Press the end of the wire to the workpiece at ninety degrees to the surface, and maintain a firm pressure. Make sure the Thermocouple Attachment Unit is charged and wait for the ready light to glow.
8.
Press discharge button, and the wire should weld to the workpiece. There will be a sharp crack and a slight arc flash.
9.
Repeat the process with the other wire, placing it approximately 1/4 in. away from the first wire. Attach a spare thermocouple, and support both
thermocouples approximately 18 in. back from the connection with a band or fiber tape.
10.
Carefully bend the wire over at right angles. This brings the thermocouple wires out along or parallel to the workpiece. It also tests the strength
of the weld. If the weld shows signs of breaking, remove the wire, restrip the end, and repeat the process.
Strap Or Tape
Thermocouple
Wires
804 322-A
OM-222 166 Page 23
4-18. Using Contact Thermocouple Sensors
1
Blanket
2
Contact Thermocouple Sensor
(See Product Literature Sheet)
The welded thermocouples discussed
previously can be used for preheating or
stress relieving. Welded thermocouples
are normally used in stress relieving applications because of their accuracy and
ability to withstand high temperatures.
As an alternative, in preheating applications a contact thermocouple sensor
can be used. This eliminates the need to
weld thermocouples and the sensor can
be moved during the preheat process to
check temperatures at other locations
on the joint. (Contact thermocouple
sensors are limited to 500 F [260 C ].)
1
. If the contact thermocouple sensor
2
is removed, the temperature recorder (if used) will display a short duration of heat drop.
The contact thermocouple sensor can
be plugged into the thermocouple extension cable or a Type K 25 ft. armored extension cable*. One of these extensions
is required for each sensor.
In preheating applications, the sensor
must be placed under the induction coil.
To be accurate, the sensor flat end must
be held against the heated surface. If
water-cooled or air-cooled coils overlap
at any location in your installation, it is recommended that a second sensor be
placed at that location.
NOTICE − Failure to follow these recommendations could cause heat damage in
the blanket or coil.
Temperatures at the weld joint can be
checked with temperature sensitive
crayons to verify the preheat temperature.
Placing Contact Thermocouple
Sensor
Place sensor between blanket and metal material. The sensor must be in
contact with the material being heated.
The tip of the sensor should be positioned in the approximate center of the
blanket anywhere along the blanket
length.
804 321-A
OM-222 166 Page 24
SECTION 5 − COMPONENTS AND CONTROLS
5-1. Controls
3
4
5 6
7 10
9
8
11
18
16
17
2
15
14
13
19
12
1
803 995-B
. When a control panel button is pushed
the yellow lamp lights to indicate activation.
1
Power Switch
Use switch to turn power source On and
Off.
LED lights to indicate a system limit condition.
7
Heat On LED
LED lights to indicate the power source output is energized.
8
Stop Button
14 Parameter Button
Use button to display real time power
source operating parameters.
15 Cooler Button
Use button to turn cooler On and Off.
Use button to stop a heating process.
16 Increase Button
Provides temperature display of thermocouples 1 through 4.
9
Use button to hold a heating process.
Use button to increase values in set-up
screen.
3
2
TC1−4 Temperature Display
Hold Button
10 Run Button
17 Decrease Button
LEDs indicate which thermocouples (1−4)
are used to control the heating process.
Use button to run a heating process.
Use button to decrease value in program
screen.
4
Use button to move selection cursor in the
4 x 40 LCD display (item 18).
Control Thermocouple LEDs
Temperature Units LEDs
LEDs indicate units for temperature measurements (F or  C).
5
Fault LED
LED lights to indicate a system fault condition.
6
Limit LED
11 Cursor Button
18 4 x 40 LCD Display
Use button to program the process control.
Displays programming, runs status, parameter, fault and limit conditions, and troubleshooting guide.
13 Run Status Button
19 Thermocouple Input Receptacles
Use button to display real time operating
status.
Use receptacles for type K thermocouple
inputs.
12 Program Button
OM-222 166 Page 25
SECTION 6 − SETUP AND OPERATION
6-1. Safety Equipment
!
1
2
Do not wear rings or watches
during operation.
Wear
the
operation:
following
during
1
Dry, Insulating Gloves
2
Safety Glasses With Side
Shields
sb3.1* 1/94
6-2. System Description
The ProHeat 35 Induction Heating Power Source is designed to function either as an air-cooled system or a liquid-cooled system. Depending on the
system type (either air-cooled or liquid-cooled), the power source is automatically configured to operate and provide an output appropriate for the type
of connected heating device.
A special identifier, embedded within the extension cable connector, provides the means for the power source to configure itself by recognizing the type
of extension cable(s) attached to its output connectors.
Designed to provide a single level of output (up to 35 kW), the ProHeat 35 power source has two panel mounted connectors that are connected in
parallel to the power source output. This design allows the system to operate with either a single output extension cable or two output extension cables.
If a single output extension cable is used, a protective plug (provided with the system) MUST be placed on the unused output connector or the system
will not operate. If two output extension cables are used, they both MUST be of the same type (either both air-cooled or both liquid-cooled) or the system
will not operate (in this case, the protective plug is not used). When two extension cables and heating devices are utilized on the system, the extension
cable lengths and heating devices MUST be identical (see Section 4-9).
The ProHeat 35 is intelligent to the point that it will automatically adjust output power levels if internal system operating parameters or internal temperatures reach or exceed specific set limits (see Section 9).
6-3. Important System Guidelines
NOTICE − When using multiple ProHeat systems on the same workpiece, keep the the coil(s) from each system at least 1 ft (30 cm) apart. The ProHeat
35 may be damaged if coils are placed closer together.
6-4. Power Source/System Setup
To view the System Setup screen, simultaneously press the Parameters
kW
A
V
Hz
and Program
buttons and the following screen will appear
on the display:
System Setup Screen
Degree Units: >_F
Tolerance...: 25
Input Type..: K TC
Power Output: 35 KW
SYSTEM SETUP
Backlight: Yes
Control Mode: Manual
System Lock: No
To change a setting:
S
Press the Cursor
S
Press Increase
OM-222 166 Page 26
button to move the cursor to the parameter to be changed
or Decrease
button to select desired set-up feature.
Possible selections:
Degree Units: F / C
Tolerance: 5 to 99 in F (3 to 55 in C)
Backlight: Yes / No
Input Type: K TC
Control Mode: Temp / Manual / Remote / Time
Power Output: 1 to 35
System Lock: Yes / No
Degree Units − press the Increase
or Decrease
buttons to select temperature units. Selection will drive the F / C indicator LEDs.
S
The factory default is F.
S
Changing from F to C will convert stored program values: ramp temperature, soak temperature, ramp rate, and temperature tolerance.
Tolerance − press the Increase
S
or Decrease
button to turn LCD display backlight On or Off.
The factory default is On.
Input Type − press the Increase
S
button to select the desired temperature tolerance.
The factory default is 25 F.
Backlight − press the Increase
S
or Decrease
or Decrease
button to select the desired temperature input device.
The factory default and only selection is K TC.
Control Mode − press the Increase
or Decrease
button to select the desired method of system control, either Temperature, Re-
mote, Manual, or Power vs Time (Time). For more details about methods of control, see Section 6-5.
S
The factory default is temperature based control.
Power Output − press the Increase
S
or Decrease
button to adjust the maximum power source output.
The factory default is 35 kW.
System Lock − press the Increase
or Decrease
button to lock or unlock the operator interface to prevent tampering with any pro-
grams. Yes indicates the system is locked, and No indicates the system is unlocked.
S
The factory default is No (unlocked).
Display Contrast − press and hold the cursor and press the Increase
button to darken, or press the Decrease
button to lighten the
contrast.
. All parameters in System Setup are considered global, and any changes to the system set-up parameters will apply to all programs.
OM-222 166 Page 27
6-4-1.
Factory Defaults
To reset the system back to factory default settings, turn off the power source, and wait until the display goes blank. Turn on the power source. When
the display lights, press and hold the Increase
defaults. Release the Increase
and Decrease
and Decrease
buttons. A message will display Press Program to reset factory
buttons, and press the Program
button.
6-5. Programming
Programming allows the operator to setup a program for a particular heating process. The selections available are Temperature, Remote, Manual, or
Power vs Time (Time).
6-5-1.
Temperature-Based Control
Temperature-based control operates the system and controls the heating process based on temperature feedback from thermocouple inputs. Thermocouples must be used for this mode of operation or the system will not operate. Within the temperature-based mode there are four different
processes available as follows: Preheat, Bakeout, PWHT (Post-Weld Heat Treat), and Custom Program.
Press the Program button to access the programming mode. Use the cursor button to move the cursor to the desired temperature-based process,
then press the Program button again to select the process.
6-5-1-1. Preheat
The preheat process is a simple method of heating material to a desired temperature and holding that temperature for a specific period of time.
When this process is selected, the following screen will appear on the LCD display:
Preheat Screen
Mode.......: Preheat
Control TC.: 1
Temperature: 400
Soak Time..: 01:00:00
The default position of the cursor is next to Control TC. Press the Increase
or Decrease
button to select the number of control
thermocouples to be used for the program. Selections are as follows: 1, 1,2, 1,2,3, or 1,2,3,4. TC1 MUST always be a control thermocouple. TC2
thru TC4 can be used for controlling or monitoring. When a thermocouple is selected as control, the LED adjacent to the seven-segment display
illuminates.
Use the Cursor
Decrease
button to move the cursor to the desired selection (Temperature or Soak Time), and press the Increase
or
button to change the value to the desired setting.
. The minimum and maximum temperature settings for preheat are 0 and 1450
F (−18 and 788 C). The minimum and maximum soak times are
0 and 100 hours. When the system is utilizing air-cooled blankets, the maximum temperature setting is 400 F (204 C). If the program setting
is above 400 F (204 C), the following screen will appear on the LCD display when the Run button is pressed:
Maximum Temperature Message Screen
Cannot enter Run mode
Programmed temperature settings
exceed air cooled limits
(400 _F, 204 _C)
OM-222 166 Page 28
6-5-1-2. Bake-Out
The bake-out process allows the operator to program a temperature and soak time as well as a cooling rate from bake-out if desired. When this
process is selected, the following screen appears on the display:
Bake-Out Screen
Mode......: Bake−Out
Control TC:>1
Soak Temp.:
600
Soak Time: 01:00:00
Cool Temp.:
200
Cool Rate:
The default position of the cursor is next to Control TC. Press the Increase
600 _/Hr
or Decrease
button to select the number of control
thermocouples to be used for the program. Selections are as follows: 1, 1,2, 1,2,3, or 1,2,3,4. TC1 MUST always be a control thermocouple. TC2
thru TC4 can be used for controlling or monitoring. When a thermocouple is selected as control, the LED adjacent to the seven-segment display
illuminates.
Use the Cursor
press the Increase
button to move the cursor to the desired selection (Soak Temperature, Soak Time, Cool Temperature, or Cool Rate), and
or Decrease
button to change the value to the desired setting.
. The minimum and maximum soak and cool temperature settings for bake-out are 0 and 1450 F(−18 and 788
C). The minimum and maximum
soak times are 0 and 100 hours. The minimum and maximum cool rates are 10 and 9999 /hr. When the system is utilizing air-cooled blankets,
the maximum temperature setting is 400 F(204 C). If the program setting is above 400 F (204 C), the following screen will appear on the LCD
display when the Run button is pressed:
Maximum Temperature Message Screen
Cannot enter Run mode
Programmed temperature settings
exceed air cooled limits
(400 _F, 204 _C)
6-5-1-3. PWHT (Post-Weld Heat Treat)
The post-weld heat treat process allows the operator to program a post-weld heat treat where ramp temperature (on increase and decrease) and
ramp rates are the same. When this process is selected, the following screen appears on the display:
PWHT Screen
Mode......: PWHT
Control TC:>1,2
600 _/Hr
Ramp Temp.:
200
Ramp Rate:
Soak Temp.:
400
Soak Time: 01:00:00
OM-222 166 Page 29
The default position of the cursor is next to Control TC. Press the Increase
or Decrease
button to select the number of control
thermocouples to be used for the program. Selections are as follows: 1, 1,2, 1,2,3, or 1,2,3,4. TC1 MUST always be a control thermocouple. TC2
thru TC4 can be used for controlling or monitoring. When a thermocouple is selected as control, the LED adjacent to the seven-segment display
illuminates.
Use the Cursor
button to move the cursor to the desired selection (Ramp Temperature, Ramp Rate, Soak Temperature, or Soak Time),
and press the Increase
or Decrease
Soak Temp
button to change the value to the desired setting.
Soak Time
Ramp Rate
Ramp Temp
Figure 6-1. Soak Parameters
. The minimum and maximum ramp temperature settings for PWHT are 0 and 1450 F (−18 and 788 C). The minimum and maximum ramp rates
are 10 and 9999 F/hr (6 and 5555 C/hr). The minimum and maximum soak temperatures are 0 and 1450 F (−18 and 788 C). The minimum
and maximum soak times are 0 and 100 hours. When the system is utilizing air-cooled blankets, the maximum temperature setting is 400 F (204
C). If the program setting is above 400 F (204 C), the following screen will appear on the LCD display when the Run button is pressed.
Maximum Temperature Message Screen
Cannot enter Run mode
Programmed temperature settings
exceed air cooled limits
(400 _F, 204 _C)
6-5-1-4. Custom Program
In Custom Program, the operator can create a custom program with multiple steps or nonsymmetrical heat treat programs where the heating and
cooling rates and temperatures are different. When this process is selected, the following screen appears on the display:
. This is the screen for initial use of the system. Subsequent use of custom program will revert to the last program used.
OM-222 166 Page 30
Custom Program Screen
Mode.......: Custom Program
Segment....:
1
Type.......: End
Control TC.: 1
The default position of the cursor is next to Segment. Press the Increase
or Decrease
button to increase or decrease the seg-
ment number, unless the segment type is End. In this case, the segment number will advance to segment 1.
Use the Cursor
button to move the cursor to the desired selection (Type or Control TC), and press the Increase
or Decrease
button to change the value to the desired setting. When the cursor is moved to the Type selection, pressing the Increase
Decrease
S
or
button changes the segment type to Step, Ramp, Soak, or End. The functions of each segment type are as follows:
Step increases the temperature in the part at full-programmed power. A maximum temperature of 1450 F (788 C) can be programmed.
S
Ramp increases or decreases the temperature in the part at a controlled rate in degrees per hour. A maximum temperature of 1450 F (788
C) and a maximum rate of 9999 F/hr (5555 C/hr) can be programmed.
S
Soak will hold the temperature for a programmed time. The minimum and maximum soak times are 0 and 100 hours.
S
End is programmed to indicate the completion of the cycle and termination of output power.
Step Function
When type is set to Step, the following screen appears on the display:
Custom Program Screen
Mode.......: Custom Program
Segment....:
1
Type.......:>Step
Temperature:
Use the Cursor
or Decrease
Pressing the Cursor
600
button to move the cursor to the Temperature position and the initial temperature can be adjusted using the Increase
button.
button again automatically advances the program to the next segment number.
Ramp Function
When type is set to Ramp, the following screen appears on the display:
OM-222 166 Page 31
Custom Program Screen
Mode.......: Custom Program
Segment....:
1
Type.......: Ramp
Temperature:
Use the Cursor
600
Ramp Rate:
600 _/Hr
button to move the cursor to the Temperature or Ramp Rate position and use the Increase
or Decrease
button to set the desired value.
When the cursor is in the Ramp Rate position, pressing the Cursor
button again automatically advances the program to the next segment
number.
Soak Function
When type is set to Soak, the following screen appears on the display:
Custom Program Screen
Mode.......: Custom Program
Segment....:
1
Type.......:>Soak
Soak Time..: 00:01:00
Use the Cursor
button to move the cursor to the Soak Time position and use the Increase
or Decrease
button to set the
desired value.
When the cursor is in the Soak Time position, pressing the Cursor
button again automatically advances the program to the next segment
number.
End Function
When type is set to End, the following screen appears on the display:
Custom Program Screen
Mode.......: Custom Program
Segment....:> 2
Type.......: End
Control TC.: 1
The only changeable parameter in the End segment is selecting the number of thermocouples. Use the Cursor
to the Control TC position. Press the Increase
OM-222 166 Page 32
or Decrease
button to move the cursor
button to select the number of control thermocouples to be used for
the program. Selections are as follows: 1, 1,2, 1,2,3, or 1,2,3,4. TC1 MUST always be a control thermocouple. TC2 thru TC4 can be used for
controlling or monitoring. When a thermocouple is selected as control, the LED adjacent to the seven-segment display illuminates.
A custom program can contain up to 10 segments. To view Program parameters, position the cursor at segment and use the Increase
Decrease
or
button to advance through the segment numbers until the End segment. When a segment number is changed, appropriate
segment parameter information appears on the display.
Typical 5-Segment Custom Program
Custom Program Screen
Mode.......: Custom Program
Segment....:
1
Type.......:>Step
Temperature:
600
Temperature increases to 600 degrees at full-programmed power.
Custom Program Screen
Mode.......: Custom Program
Segment....:
2
Type.......: Ramp
Temperature:>1250
Ramp Rate:
600 _/Hr
Controlled heating to 1250 degrees F at a ramp of 600 degrees per hour.
Custom Program Screen
Mode.......: Custom Program
Segment....:
3
Type.......: Soak
Soak Time..:>01:00:00
Soak at 1250 degrees F for a period of 1 hour.
Custom Program Screen
Mode.......: Custom Program
Segment....:
4
Type.......:>Ramp
Temperature:
600
Ramp Rate:
600 _/Hr
Controlled cooling to 600 degrees F at a rate of 600 degrees per hour.
OM-222 166 Page 33
Custom Program Screen
Mode.......: Custom Program
Segment....:
5
Type.......: End
Control TC.: 1
End segment ends the heat treat cycle. Controller is programmed to control the process using four thermocouples.
6-5-2.
Manual Control
Manual control allows programming of a specific power level for a specific period of time. When this process is selected, the following screen appears
on the display:
Manual Program Screen
Mode....: Manual
Power..:
0.0 KW
Command.:
Current:
0 A
Voltage:
0 V
0.0 KW
Run Time: 00:03:00
Frequency:
4.5 KHz
The only programmable selections are Command power and Run Time. Command can be adjusted to deliver up to 35 KW (based on maximum
power selected in the set-up screen) for a period of up to 99 hours, 59 minutes, 59 seconds.
Power source operating power, current, voltage, and frequency are shown on the right-hand side of the display.
To reset the system back to factory default settings, turn off the power source, and wait until the display goes blank. Turn on the power source. When
the display lights, press and hold the Increase
defaults. Release the Increase
6-5-3.
and Decrease
and Decrease
buttons. A message will display Press Program to reset factory
buttons, and press the Program
button.
Remote Control
If Remote was selected as the control mode in the system setup screen, the following screen appears for programming:
Mode....: Remote
Power..:
0.0 KW
Run Time:>00:03:00
Current:
0 A
Voltage:
0 V
Frequency:
4.5 KHz
Time is the only parameter that can be set. The values are 0 − 99:59:59.
6-5-4.
Power vs Time Control
Power vs Time control operates the system and controls the heating process based on programmed time and power.
Press the Program button to access the programming mode. Use the cursor button to move the cursor between Mode, Segment, Type, Power, and
Time.
OM-222 166 Page 34
Mode...: Timed
Segment:
1
Type...:>Power Level
Power..:
0.0 KW
Time: 00:00:00
The default position of the cursor is next to Program. Press the Increase
Use the Cursor
or Decrease
button.
button to move the cursor to the desired selection, and press the Increase
or Decrease
button to
change the value to the desired setting.
Possible selections Timed:
Segment: 1 − 10
Type: Power Level, Slope, End
Power: 0.0 − 35
Time: 00:00:00 − 99:59:59 or infinity
6-6. Run Status
Run status allows the operator to check status of a program during in-process heating. Depending on the control mode (Temperature or Manual) and
the temperature based mode (Preheat, Bake-Out, PWHT, or Custom), different style screens appear on the display. Run status is for monitoring
purposes only and has no selectable or changeable parameters.
6-6-1.
Temperature Based Control
6-6-1-1. Preheat, Bake-Out And PWHT Run Status Screen
Run Status Screen
Mode.......: Preheat
TC5:
77
Target Temp: −−−−
TC6:
77
Countdown..: −−:−−:−−
Status.....: Stopped
Mode displays the programming mode (Preheat, Bake-Out, PWHT, or Custom Program). During active operation, Target Temp shows the target
temperature based on the specific program, Countdown shows the time remaining in a soak segment, and Status shows the program segment type
(step, soak, ramp, hold, or stopped). TC5 and TC6 display the temperature of thermocouples 5 and 6. This screen is for monitoring purposes only.
6-6-1-2. Custom Program
Run Status Screen
Mode.......: Custom Program
TC5:
77
Target Temp: −−−−
TC6:
77
Countdown..: −−:−−:−−
Segment:
1
Status.....: Stopped
During active operation, Target Temp shows the target temperature based on the active segment, Countdown shows the time remaining in a soak
segment, and Status shows the program segment type (step, soak, ramp, hold, or stopped) of the active segment and the active segment number.
TC5 and TC6 display the temperature of thermocouples 5 and 6. This screen is for monitoring purposes only.
OM-222 166 Page 35
6-6-2.
Manual Control
Run Status Screen
Mode.....: Manual
TC5:
77
Power....:
TC6:
77
0.0 KW
Countdown: −−:−−:−−
Status...: Stopped
During active operation, Power shows the actual power delivered from the power source, Countdown shows the time remaining in the heating cycle,
and Status indicates if the system is running or stopped. TC5 and TC6 display the temperature of thermocouples 5 and 6. This screen is for
monitoring purposes only.
. No changes can be made to the run status screen, and the Cursor, Increase and Decrease buttons are not functional.
6-6-3.
Remote Control
Mode.....: Remote
TC5: 77
Power....:
TC6: 77
0.0 KW
Countdown: 00:00:00
Status...: Stopped
During active operation, Power shows the actual power delivered from the power source, Countdown shows the time remaining of the heating cycle,
and Status indicates if the system is running or stopped. This screen is for monitoring purposes only.
. No changes can be made to the run status screen, and the Cursor, Increase and Decrease buttons are not functional.
6-6-4.
Power vs Time Control
Mode...: Power vs Time
TC5: 77
Segment:
TC6: 77
1
Type...: End
Power..:
0.0 KW
Countdown: 00:00:00
Mode displays the control mode. Also displayed are the present program segment, Segment type, current power level and remaining time of the
current segment.
6-7. Parameters
During active operation, the Parameters screen allows the operator to monitor the power source output operating parameters. These parameters include output power, output amperage, output voltage, and output frequency. In addition, temperatures of thermocouples TC5 and TC6 are also
displayed. The Parameters screen is for monitoring purposes only and has no selectable or changeable parameters.
OM-222 166 Page 36
Parameters Screen
Power....:
0.0 KW
TC5:
77
Current..:
0 A
TC6:
77
Voltage..:
0 V
Frequency:
4.5 KHz
6-8. Cooler
The Cooler
button is used to turn the cooler On or Off on systems using liquid-cooled output cables. Systems using liquid-cooled output
cables will not deliver output unless the cooler is On. If the cooler is not started prior to initiating a heating cycle, the system will automatically start the
cooler when the Run
by pressing the Cooler
button is pressed. Pressing the Stop
button does not shut off the cooler. The cooler must be shut off separately
button.
When power source output is energized, the cooler cannot be turned off. If the Cooler
button is pressed while output is energized, the following
screen will appear on the display:
Cooler Message Screen
Cooler cannot be turned off
while output is on
. The Cooler button is inactive when no cooler is detected and no liquid-cooled output cable is attached.
6-9. Real-Time Operation
Each time the unit is first turned On it initiates a system check routine that includes verification of communication between circuit boards and checking
for output isolation faults. During this check routine, all displays and LEDs illuminate and the following screen appears on the display:
Power Up Message Screen
ProHeat
Firmware Revision X.XX
Copyright (c) 2005 − 2009
Miller Electric Mfg. Co.
X.XX indicates the firmware revision number installed in the unit.
If an error is detected during the check routine, the system fault LED illuminates and an error message screen appears on the display (see Section 9-5).
When the check routine is completed successfully, the operator interface defaults to the following:
OM-222 166 Page 37
S
The Stop
button indicator LED illuminates to indicate no heating cycle is in process.
S
The temperature displays indicate actual temperature from the TC’s (thermocouples). If no thermocouples are connected, the displays indicate OPEN.
S
Control LEDs illuminate to indicate the number of control TC’s in the last program.
S
The appropriate degree units (F or C) light illuminates.
S
The display defaults to the Run Status screen from the last program used and the Run Status
S
If no fault or limit conditions are present, system status lights are not illuminated.
Once set up is complete for the desired program procedure (see Section 6-4), pressing the Run
program run is initiated, the Run
button indicator LED illuminates.
button will initiate a heating cycle. When a
button yellow indicator LED illuminates and the Heat On blue indicator LED illuminates to indicate output is
present to the coil. The cycle will continue until the end of the program is reached or the Stop
button is pressed.
The system has a hold function that will maintain a temperature or hold the soak time of any active temperature controlled program. Pressing the Hold
button will only activate the hold function while in the run mode. If the system is not in the run mode, the following screen will appear on the
display:
Hold Message Screen
Must be running to enter Hold mode
In addition, when running in Manual operating mode, the Hold
pressing the Hold
button is not functional. If the system is running in Manual operating mode,
button will cause the following screen to appear on the display:
Hold Message Screen
Hold mode not available when
temperature control is not active
OM-222 166 Page 38
Pressing the Hold
button will activate the hold function while running a temperature controlled program. While in the hold mode, the parame-
ters for the program in process can be modified. The cycle will continue after pressing the Run
button. A change of program parameters during
the hold will not change the original program. The original program parameters are maintained for the next heating cycle.
To make changes to a program while in run mode, press the Hold
button and the yellow indicator LED will illuminate, and the Run
button yellow indicator LED will turn off. When in hold, the system will maintain the actual temperature of the hottest thermocouple while the program is
being changed.
S
Press the Program
button and the yellow indicator LED will illuminate. The display will change to show the current mode of opera-
tion or the current segment of a Custom Program.
S
Use the Cursor
S
Press the Increase
S
Press the Run
button to move the cursor to the parameter that will be changed.
or Decrease
button to make desired changes.
button to resume program operation and the yellow indicator LED will illuminate, and the Hold
button yellow
indicator LED will turn off.
Any program parameter (temperatures, rates, times, or number of TC’s) can be changed while in hold. In a custom based program, any segment number can be changed; however, if the operation of a segment has already been completed in a program, the change to that segment will not affect the
program function.
S
Press the Stop
button to end the program.
OM-222 166 Page 39
6-10. System Operating Characteristics
The power source delivers a high-frequency alternating current output that energizes the coil creating the magnetic field used to heat the workpiece.
The power source output characteristics are a function of the configuration, type and number of coils used as shown in the following table:
Table 6-1. Power Source Output Characteristics
Output Type
Air Cooled Single and Dual
Single Liquid Cooled
Dual Liquid Cooled
Maximum Amperage
Maximum Voltage
Frequency Range
250 A per output for 15 minutes.
After 15 minutes, power steps
down to limit current to 150 amperes per output for continuous
operation.
700 V
5 − 25.7 kHz
See Note 1
700 V
25.7 − 30 kHz
350 A
700 V
5 − 20 kHz
See Note 2
700 V
20 − 30 kHz
350 A per output/700 A total
700 V
5 − 20 kHz
See Note 2
700 V
20 − 30 kHz
300
. Note 1: In the frequency range
Air Cooled Output
of 25.7 to 30 KHz, the maximum output amperage decreases linearly from 250 down
to 175 amperes per output. Regardless of frequency, after 15
minutes the maximum output is
reduced to 150 amperes per
output.
Max Amperage Per Output
250
200
150
100
50
0
5
400
25.7
Frequency (KHz)
30
. Note 2:
In the frequency range
of 20 to 30 KHz, the maximum
output decreases linearly from
350 down to 175 amperes per
output.
Liquid Cooled Output
Max Amperage Per Output
350
300
250
200
150
100
50
0
OM-222 166 Page 40
5
Frequency (KHz)
20
30
SECTION 7 − MAINTENANCE
7-1. Routine Maintenance
!
n = Check
Z = Change
~ = Clean
* To be done by Factory Authorized Service Agent
Every
3
Months
2
l Damaged or Unreadable
Labels
2
1
~ Output Connector Contacts
Disconnect power
before maintaining.
. Maintain more often
during severe conditions.
l = Replace
2
Reference
Section 4-9,
4-14
1
~ Ground Sense Lead Receptacles
~ Operator Interface Overlay
1
n Integrity Of Protective
Plug, Replace If Necessary
Every
6
Months
nlCracked Cables
Section 9-8
~ Inside Unit
Every
Year
Sections
7-2, 7-3
n Verify Unit Calibration
OM-222 166 Page 41
7-2. Calibration Verification Equipment
1
2
3
1 Thermocoupler Calibrator
Suggested calibrator from Fluke item 714
or equivalent.
2 Type K Mini Connector
Suggested connector from Fluke item
80CK−M or equivalent.
A length of type K thermocouple wire is
required. Connect red to negative and
5
4
yellow to positive when wiring connectors.
3 Type K 2-Pin Male Connector
Suggested connector from Newport item
OST−K−M or equivalent
4 Calibration Label
Suggested label from Q−CEES item
QCC306BU or equivalent.
5 Precision Digital Voltmeter (DVM)
6
Suggested meters are Agilent Multimeter
or Hewlett Packard Multimeter Model
34401A or equivalent. DVM must be able
to read to three decimal places (0.000).
6
Interconnecting Cable
MILLER Part No. 300168 can be used to
connect the Recorder to the DC power
supply.
7-3. Calibration Verification Procedure
Calibration verification should be done every year. Use appropriate Certificate of Calibration to record calibration information. A spreadsheet could also
be used to record the information.
7-3-1.
Initial Set Up
1.
Power switch off
2.
Have qualified person connect primary power to ProHeat 35.
3.
Turn ProHeat 35 power switch on.
4.
Press and hold the Program button, then press Parameters to enter setup mode.
5.
Press Cursor button 4 times to get to Control Mode line.
6.
Press the Decrease button to change to Manual, if necessary.
7.
Press the Run Status button. (TC5 and TC6 will show in upper right-hand corner of display)
8.
Let unit idle for a minimum of 15 minutes before checking calibration.
9.
Turn on Fluke 714 Thermocouple Calibrator and Precision DVM. Leave them on for a minimum of 15 minutes before checking calibration.
7-3-2.
TC Input/Output Check
1.
Connect precision DVM (DC Volts set to display in thousandths) to RC9. This is the top connector located on the back of the ProHeat 35. Red
lead to pin 1 and black to pin 5.
2.
Set TC calibrator to 382.0 F or 194.5 C. Connect to TC1 input jack on front of ProHeat.
3.
Verify TC display value of (3F) or (2C). RC9 output has a tolerance of (6F) or (3.3C). DVM reads 2.787 VDC (0.038) (2.749 – 2.825).
4.
Enter DVM values into calibration certificate If you are creating your own spreadsheet use the following calculation.
The voltage to temperature calculation is:
(DC Volts Out x 155) − 50 = F
(DC Volts Out x 86.1) − 45.4 = C
5.
Repeat steps 1.−4. for TC2 – TC6 input jacks.
For TC2 move red precision DVM lead to RC9 pin 2.
For TC3 move red precision DVM lead to RC9 pin 3.
For TC4 move red precision DVM lead to RC9 pin 4.
For TC5 move red precision DVM lead to RC9 pin 6.
For TC6 move red precision DVM lead to RC9 pin 7.
Note: TC5 and TC6 will show in upper right-hand corner of display.
6.
Repeat steps 1.−5. with TC calibrator set to 882.0 F or 472.2 C, verify TC display value (3F) or (2C). RC9 output has a tolerance of (6F)
or (3.3C). DVM reads 6.013 VDC (0.038) (5.975 – 6.041).
7.
Repeat steps 1.−5. with TC calibrator set to 1382.0 F or 750 C, verify TC display value (3F) or (2C). RC9 output has a tolerance of (6F)
or (3.3C). DVM reads 9.239 VDC (0.038) (9.201 – 9.277).
7-3-3.
1.
Finishing Procedure
If ProHeat 35 was set for Temp in Control Mode follow steps 7-3-1, steps 4.−6. to change it back to Temp.
OM-222 166 Page 42
2.
Turn ProHeat 35 power switch off.
3.
Have qualified person disconnect primary power.
4.
Remove precision DVM and TC calibrator.
5.
Complete calibration label & place it on unit directly above TC1 display.
I.D. No. (TC board serial number) Be sure the serial number matches the board in the machine.
By (your initials) Date (today’s date)
Due (date 1 year from today)
6.
Print a copy of the certificate to send with the ProHeat 35.
7.
If entering data in a spreadsheet, save data.
Notes
OM-222 166 Page 43
OM-222 166 Page 44
Calibration Date:
Re−Calibration Date:
A−232171−B 09/09/08
Calibrated Multimeter:
Thermocouple Calibrator:
Instrumentation Used:
CHANNEL
CHANNEL
CHANNEL
CHANNEL
CHANNEL
CHANNEL
1
2
3
4
5
6
PRIMARY STANDARD
382 (F)
Voltage
Equivalent
Out (V)
Temp (F)
PRIMARY STANDARD
1382 (F)
Voltage
Equivalent
Out (V)
Temp (F)
Serial Number:
Serial Number:
PRIMARY STANDARD
882 (F)
Voltage
Equivalent
Out (V)
Temp (F)
Company name
does hereby certify the above instrument was calibrated against standards
maintained by Company name
and meets or exceeds all published specifications.
The accuracy of these standards is directly traceable to the National Institute of Standards and Technology.
TCI Serial Number:
Certified by:
CERTIFICATE OF CALIBRATION
Com pany Nam e
Street
PO Box
City, State, Zip Code
OM-222 166 Page 45
Calibration Date:
Re−Calibration Date:
A−232171−B 09/09/08
Calibrated Multimeter:
Thermocouple Calibrator:
Instrumentation Used:
C H AN N E L
C H AN N E L
C H AN N E L
C H AN N E L
C H AN N E L
C H AN N E L
1
2
3
4
5
6
P R IM AR Y S T AN D AR D
1 94 (C )
V o lta g e
E q u iv a le n t
O u t (V )
T em p (C )
P R IM AR Y S T AN D AR D
75 0 (C )
V o ltag e
E q u iva len t
O u t (V )
T e m p (C )
Serial Number:
Serial Number:
P R IM AR Y S T AN D AR D
4 7 2 (C )
V o ltag e
E q u iv a le n t
O u t (V )
T e m p (C )
Company name
does hereby certify the above instrument was calibrated against standards
maintained by Company name
and meets or exceeds all published specifications.
The accuracy of these standards is directly traceable to the National Institute of Standards and Technology.
TCI Serial Number:
Certified by:
CERTIFICATE OF CALIBRATION
Com pany Nam e
Street
PO Box
City, State, Zip Code
SECTION 8 − SAFETY PRECAUTIONS FOR SERVICING
Protect yourself and others from injury — read, follow, and save these important safety precautions and operating instructions.
8-1. Symbol Usage
OM-___ - Date, safety_ihtm 2011-10
DANGER! − Indicates a hazardous situation which, if
not avoided, will result in death or serious injury. The
possible hazards are shown in the adjoining symbols
or explained in the text.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible
hazards are shown in the adjoining symbols or explained in the text.
NOTICE − Indicates statements not related to personal injury.
. Indicates special instructions.
This group of symbols means Warning! Watch Out! ELECTRIC
SHOCK, MOVING PARTS, and HOT PARTS hazards. Consult symbols and related instructions below for necessary actions to avoid the
hazards.
8-2. Servicing Hazards
The symbols shown below are used throughout this manual
to call attention to and identify possible hazards. When you
see the symbol, watch out, and follow the related instructions
to avoid the hazard.
Only qualified persons should service, test, maintain, and repair this unit.
FLYING METAL or DIRT can injure eyes.
D Wear safety glasses with side shields or face
shield during servicing.
D Be careful not to short metal tools, parts, or
wires together during testing and servicing.
During servicing, keep everybody, especially children, away.
INDUCTION HEATING can burn.
ELECTRIC SHOCK can kill.
D Do not touch live electrical parts.
D Turn Off induction heating power source and
disconnect and lockout input power using line
disconnect switch, circuit breakers, or by removing plug from receptacle, or stop engine before servicing unless the procedure specifically requires an energized unit.
D
Insulate yourself from ground by standing or working on dry insulating mats big enough to prevent contact with the ground.
D
Do not leave live unit unattended.
D
If this procedure requires an energized unit, have only personnel
familiar with and following standard safety practices do the job.
D
When testing a live unit, use the one-hand method. Do not put both
hands inside unit. Keep one hand free.
D
Disconnect input power conductors from deenergized supply line
BEFORE moving an induction heating power source.
SIGNIFICANT DC VOLTAGE exists in inverter
power sources AFTER removal of input power.
D
Turn Off inverter, disconnect input power, and discharge input
capacitors according to instructions in Troubleshooting Section before touching any parts.
D Do not touch hot parts bare handed.
D Allow cooling period before handling parts on
equipment.
D Do not touch or handle induction head/coil during operation.
D Keep metal jewelry and other metal personal items away from
head/coil during operation.
D To handle hot parts, use proper tools and/or wear heavy, insulated welding gloves and clothing to prevent burns.
EXPLODING PARTS can injure.
D Failed parts can explode or cause other parts to
explode when power is applied to inverters.
D Always wear a face shield and long sleeves
when servicing inverters.
SHOCK HAZARD from testing.
D Turn Off induction heating power source before making or changing meter lead connections.
D Use at least one meter lead that has a selfretaining spring clip such as an alligator clip.
D Read instructions for test equipment.
STATIC (ESD) can damage PC boards.
D Put on grounded wrist strap BEFORE handling
boards or parts.
D Use proper static-proof bags and boxes to
store, move, or ship PC boards.
FIRE OR EXPLOSION hazard.
D Do not place unit on, over, or near combustible
surfaces.
D Do not service unit near flammables.
FALLING EQUIPMENT can injure.
D Use lifting eye to lift unit only, NOT running
gear, gas cylinders, or any other accessories.
D Use equipment of adequate capacity to lift and
support unit.
D If using lift forks to move unit, be sure forks are long enough to
extend beyond opposite side of unit.
D Follow the guidelines in the Applications Manual for the Revised
NIOSH Lifting Equation (Publication No. 94−110) when manually lifting heavy parts or equipment.
OM-222 166 Page 46
MOVING PARTS can injure.
D Keep away from moving parts such as fans.
D Have only qualified persons remove doors,
panels, covers, or guards for maintenance and
troubleshooting as necessary.
D Keep hands, hair, loose clothing, and tools away from moving
parts.
D Reinstall doors, panels, covers, or guards when maintenance is
finished and before reconnecting input power.
ELECTRIC AND MAGNETIC FIELDS (EMF)
can affect Implanted Medical Devices.
D Wearers of Pacemakers and other Implanted
Medical Devices should keep away from servicing areas until consulting their doctor and the
device manufacturer.
OVERUSE can cause OVERHEATING.
D Allow cooling period; follow rated duty cycle.
D Reduce current or reduce duty cycle before using induction heating equipment again.
D Do not block or filter airflow to unit.
H.F. RADIATION can cause interference.
D High-frequency (H.F.) can interfere with radio
navigation, safety services, computers, and
communications equipment.
D Have only qualified persons familiar with
electronic equipment install, test, and service
H.F. producing units.
D The user is responsible for having a qualified electrician promptly correct any interference problem resulting from the installation.
D If notified by the FCC about interference, stop using the
equipment at once.
D Have the installation regularly checked and maintained.
D Keep high-frequency source doors and panels tightly shut, keep
spark gaps at correct setting, and use grounding and shielding to
minimize the possibility of interference.
READ INSTRUCTIONS.
D Use Testing Booklet (Part No. 150 853) when
servicing this unit.
D Consult the Owner’s Manual for welding safety
precautions.
D Use only genuine replacement parts from the manufacturer.
D Read and follow all labels and the Technical Manual carefully before installing, operating, or servicing unit. Read the safety information at the beginning of the manual and in each section.
8-3. California Proposition 65 Warnings
Welding or cutting equipment produces fumes or gases
which contain chemicals known to the State of California to
cause birth defects and, in some cases, cancer. (California
Health & Safety Code Section 25249.5 et seq.)
This product contains chemicals, including lead, known to
the state of California to cause cancer, birth defects, or other
reproductive harm. Wash hands after use.
8-4. EMF Information
Electric current flowing through any conductor causes localized electric
and magnetic fields (EMF). Welding current creates an EMF field
around the welding circuit and welding equipment. EMF fields may interfere with some medical implants, e.g. pacemakers. Protective
measures for persons wearing medical implants have to be taken. For
example, restrict access for passers−by or conduct individual risk assessment for welders. All welders should use the following procedures
in order to minimize exposure to EMF fields from the welding circuit:
1. Keep cables close together by twisting or taping them, or using a
cable cover.
2. Do not place your body between welding cables. Arrange cables
to one side and away from the operator.
3. Do not coil or drape cables around your body.
Model
4. Keep head and trunk as far away from the equipment in the
welding circuit as possible.
5. Connect work clamp to workpiece as close to the weld as
possible.
6. Do not work next to, sit or lean on the welding power source.
7. Do not weld whilst carrying the welding power source or wire
feeder.
About Implanted Medical Devices:
Implanted Medical Device wearers should consult their doctor and the
device manufacturer before performing or going near arc welding, spot
welding, gouging, plasma arc cutting, or induction heating operations.
If cleared by your doctor, then following the above procedures is recommended.
TM- ____ Page 47
SECTION 9 − DIAGNOSTICS & TROUBLESHOOTING
The ProHeat 35 power source has on-board capabilities to aid in troubleshooting problems should any conditions occur during operation. This
troubleshooting capability consists of the Fault LED, Limit LED, and message screens that appear on the front panel LCD display.
9-1. Operator Interface Indicators
1
2
3
803 995-B
1
Fault LED
LED lights to indicate a system fault
condition.
OM-222 166 Page 48
2
Limit LED
LED lights to indicate a system limit
condition.
3
4 x 40 LCD Display
Displays programming, run status, parameters, fault and limit conditions, and
troubleshooting guide.
9-2. Limit Conditions
A limit condition indicates that the system has encountered an open thermocouple or is outside the range of its optimum operating conditions or
parameters. Should a limit condition occur during operation, the yellow Limit LED will flash to indicate a problem. If the active screen on the LCD display
is Run Status or Parameters, a message describing the particular limit condition will appear on the display. If the active screen is Program, press the
button to display the limit condition.
Run Status
In a limit condition, the power source will continue to deliver output power and protect itself from damage by reducing the output power. This situation
allows the operator time to determine the best action to correct the problem as described by the limit message on the LCD display.
If a limit condition occurs, there are two selectable options:
S
Acknowledge the limit and continue operation.
S
Terminate operation to correct the problem causing the limit.
Pressing the Decrease
button will acknowledge the limit and continue operation with the existing set up. In the acknowledge state, the yellow
Limit LED will stop flashing and remain on continuously. The LCD display will revert to an active screen once the Program
button, or Parameters
kW
A
V
Hz
button, Run Status
button is pressed.
If a new limit condition should occur after the first is acknowledged, the yellow Limit LED will start flashing to indicate a new problem. To display the limit
condition, press the Run Status
button and the LCD display will show a message describing the new and previous limit messages.
To obtain additional information regarding the limit condition and suggested solutions to resolve the limit, press the Increase
button, and the
LCD display will indicate possible solutions based on the type of limit condition.
If the operator determines that the best course of action is to terminate operation and make suggested changes to the setup to eliminate the limit condition, press the Stop
button. After changes are made to the setup, press the Run
button to restart the process.
9-3. Limit Condition Codes
Limit Condition
Additional Information
L01: Thermocouple #1 Open
Check for open temperature sensor and repair
Change to back-up temperature sensor
L02: Themocouple #2 Open
Check for open temperature sensor and repair
Change to back-up temperature sensor
L03: Thermocouple #3 Open
Check for open temperature sensor and repair
Change to back-up temperature sensor
L04: Thermocouple #4 Open
Check for open temperature sensor and repair
Change to back-up temperature sensor
L05: Thermocouple #5 Open
Check for open temperature sensor and repair
Change to back-up temperature sensor
L06: Thermocouple #6 Open
Check for open temperature sensor and repair
Change to back-up temperature sensor
L07: Output Voltage Limit
Tighten blanket against pipe surface
L08: Output Voltage Limit
Increase number of turns
Increase coil space
Shorten extension cable
Increase insulation width
L09: Output Current Limit
Tighten blanket against pipe surface
L10: Output Current Limit
Increase number of turns
Decrease coil space
Tighten cable on insulation
L11: Coolant Overtemp Limit
Check coolant flow and level
Clean coolant filters and heat exchanger
Increase number of turns
Verify appropriate insulation thickness
OM-222 166 Page 49
Limit Condition
Additional Information
L12: Power Source Overtemp Limit
Check for blocked vents
Clean wind tunnel heat sinks
L13: Cable Connection
Check for loose/open output connection
Verify all output cables are same type
Verify receptacle plug connected
9-4. Fault Conditions
A fault condition occurs if the system encounters an isolation fault, encounters operating conditions outside operational limits, or if there is a serious
problem with the system. Should a fault condition occur, the output is immediately turned off, the red Fault LED flashes and the Stop
button
LED flashes. If the active screen on the LCD display is Run Status or Parameters, a message describing the particular fault condition will appear on the
display. If the active screen is Program, press the Run Status
Pressing the Decrease
Stop
button to display the fault condition.
button will acknowledge the fault and the red Fault LED will stop flashing and remain on continuously. However, the
button LED will continue to flash indicating that the process has stopped.
To obtain additional information regarding the fault condition and suggested solutions to resolve the fault, press the Increase
button, and the
LCD display will indicate possible solutions based on the type of fault condition. In most cases, a fault condition will indicate that service is required.
9-5. Fault Condition Codes
Fault Condition
Additional Information
F51: Thermocouple #1 Internal Fault
Service required
F52: Themocouple #2 Internal Fault
Service required
F53: Thermocouple #3 Internal Fault
Service required
F54: Thermocouple #4 Internal Fault
Service required
F55: Thermocouple #5 Internal Fault
Service required
F56: Thermocouple #6 Internal Fault
Service required
F57: CJT Sensor Internal Fault
Service required
F58: Output Voltage Fault
Service required
F59: Output Current Fault
Service required
F60: Temperature Sensor Fault
Check control TC connections
Check control TC extension cable
F61: Coolant Flow Fault
Check for coolant leak
Clean for coolant blockage
Check coolant filter and level
Check coolant connections
F62: Isolation Fault
Check for exposed conductor
Clean for moisture on cables
F63: Line Voltage Fault
Check line voltage
F64: Power Source Overtemp Fault
Verify power source vents and
wind tunnel are unobstructed
F65: Current Source Fault
Service required
F66: Under Frequency Fault
Check for loose or open connections
in output cable
Decrease number of turns
Decrease coil space
F67: Over Frequency Fault
OM-222 166 Page 50
Verify heating cable properly wrapped
Verify material being heated is magnetic
Fault Condition
Additional Information
F68: Cable Connection Fault
Check for loose/open output connection
Verify all output cables are same type
Verify receptacle plug connected
F69: Coolant Overtemp Fault
Check coolant flow and level
Clean coolant filters and heat exchanger
Increase number of turns
Verify appropriate insulation thickness
F70: Internal Communication Fault
Service required
F71: Internal Thermistor Fault
Service required
F72: Coolant Thermistor Fault
Service required
F73: Decoupled/Open Coil
Check for loose/open output connection. Tighten coil/blanket.
F74: Isolation Fault Self-Test Error
Service required
F75: Internal Power Supply Fault
Service required
F76: Current Source Control Fault
Service required
F77: Power Source Internal Comm Fault
Service required
F78: Output Current Sense Fault
Check for loose/open output connection or an extension cable connected with no coil attached
at the end.
9-6. System Diagnostic Screens
Additional system diagnostics are available and accessible through the operator interface. Detail operational parameters can be accessed by pressing
and holding the Run Status
button and pressing the Parameters
kW
A
V
Hz
button.
When this feature is initially activated, the following screen appears on the LCD display:
System Diagnostic Screen
RemCmd: 1023 Off
Cable1: LQD
DIAG1
OutI1:
0 A
Cable2: LQD
OutI2:
0 A
ClntFR: 0.75 GPM
IsrcFb:
0 A
ClrSts: Flowing
RemCmd − This is the value of the remote command and the status of the remote contactor.
. Remote controls can be used to enable/disable output in all control modes. They only affect output power level when the control mode is set to
Remote.
Out I1 − This is the value of the output current on output 1.
Out I2 − This is the value of the output current on output 2.
Isrc FB − This is the value of the amperage in the current source inverter.
Cable 1 − This is the cable type hooked up to output number one. Possible labels:
S
AIR − for an air-cooled cable
S
LQD − for a liquid-cooled cable
S
PLUG − for a protective plug
S
OPEN − no cable or plug in place
Cable 2 − This is the cable type hooked up to output number two. Possible labels:
S
AIR − for an air-cooled cable
S
LQD − for a liquid-cooled cable
S
PLUG − for a protective plug
S
OPEN − no cable or plug in place
OM-222 166 Page 51
ClntFR − This is the coolant flow rate (in GPM) from the cooler on a liquid-cooled system.
ClrSts − This is the status of the cooler. Possible labels:
S
Off
S
Flowing
The second diagnostic screen is available by again pressing and holding the Run Status
button and pressing the Parameters
System Diagnostic Screen
VLnA−B: 460V
Therm1:
75
DIAG2
VLnB−C: 460V
Therm2:
75
Therm5: OPEN
VLnC−A: 460V
Therm3:
75
ClrTmp:
VBus: 650V
Therm4: OPEN
RmtFlw: Off
VLnA-B − This is the phase to phase line voltage between phases A and B.
VLnB-C − This is the phase to phase line voltage between phases B and C.
VLnC-A − This is the phase to phase line voltage between phases C and A.
VBus − This is the DC bus voltage.
Therm1 − This is the temperature of the current source primary heatsink.
Therm2 − This is the temperature of the bridge heatsink.
Therm3 − This the the temperature of the current source secondary heatsink.
Therm4 − Open (not used).
Therm5 − Open (not used).
ClrTmp − This is the temperature of the coolant on a liquid-cooled system.
S
OPEN − no cooler is detected.
RmtFlw − This is the status of the relay contacts for remote coolant flow on a liquid-cooled system.
S
OFF
S
ON
. RmtFlw feature is unsupported on the current platform.
OM-222 166 Page 52
77
kW
A
V
Hz
button.
9-7. Removing Wrapper and Measuring Input Capacitor Voltage
!
900 Volts dc can be present
on the capacitor bus and
significant DC voltage can
remain on capacitors after
unit is Off. Always check the
voltage on inverter assembly
as shown to be sure the input
capacitors have discharged
before working on unit.
!
Turn Off welding power
source, and disconnect
input power.
!
Significant DC voltage can
remain on capacitors after
unit is Off. Always check the
voltage as shown to be sure
the input capacitors have
discharged before working
on unit.
Tools Needed:
5/16, 3/8 in.
Remove right side panel and disconnect fan motor FM3.
1
Current Source Interconnect
Board PC4
2
Voltmeter
Measure the dc voltage across the
+ bus terminal and − bus terminal on
PC4 as shown until voltage drops to
near 0 (zero) volts.
. If the capacitor voltage does
not drop to near zero after
several minutes, use a bleeder
resistor of between 200 and
500 ohms, at least 10 watts,
and #16 AWG 600 volts ac insulation rated wire to discharge
the capacitor(s).
1
3
Typical Bleeder Resistor
An example of a typical bleeder
resistor is shown on this page.
Proceed with job inside unit. Reconnect FM3 and reinstall right side
panel when finished.
+ lead to right bus terminal,
− lead to left bus terminal
3
Typical Bleeder Resistor
200 to 500 ohm, 10 watt
wire wound resistor
2
#16 AWG 600 Volts AC
Insulation Rating
804 519-B
OM-222 166 Page 53
9-8. Blowing Out Inside Of Unit
!
Turn Off welding power
source and disconnect input
power.
!
Remove wrapper and be
sure input capacitors are
discharged.
Blow out inside of unit. Blow out fan
motors in right side panel and front
panel.
804 625-B
Notes
MATERIAL THICKNESS REFERENCE CHART
24 Gauge (.025 in.)
22 Gauge (.031 in.)
20 Gauge (.037 in.)
18 Gauge (.050 in.)
16 Gauge (.063 in.)
14 Gauge (.078 in.)
1/8 in. (.125 in.)
3/16 in. (.188 in.)
1/4 in. (.25 in.)
5/16 in. (.313 in.)
3/8 in. (.375 in.)
1/2 in. (.5 in.)
OM-222 166 Page 54
Notes
OM-222 166 Page 55
SECTION 10 − ELECTRICAL DIAGRAM
Figure 10-1. Circuit Diagram
OM-222 166 Page 56
218 057-J
OM-222 166 Page 57
SECTION 11 − PARTS LIST
. Hardware is common and
3
5
not available unless listed.
4
11
See Figure
11-3
12
13
14
9
8
1
11
6
7
See Figure
11-2
10
2
Ref. 804 218-D
Figure 11-1. Wrappers
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 11-1. Wrappers
. . . 1 . . . . . . . . . . . . +217 470
. . . 2 . . . . . . . . . . . . . 217 860
. . . 2 . . . . . . . . . . . . . 194 466
. . . 3 . . . . . . . . . . . . +217 325
. . . 4 . . . . . . . . . . . . . 147 876
. . . 4 . . . . . . . . . . . . . 190 025
. . . 5 . . . . . . . . . . . . . 217 334
. . . 6 . . . . . . . . . . . . . 217 468
. . . 7 . . . . . . . . . . . . . 218 280
. . . 8 . . . . . . . . . . . . . 222 106
. . . 9 . . . FM3 . . . . . 236 263
. . . 10 . . . . . . . . . . . . . 206 270
. . . 11 . . . . . . . . . . . . . 198 035
. . . 12 . . . . . . . . . . . . . 197 931
. . . 13 . . . . . . . . . . . . . 197 900
. . . 14 . . . . . . . . . . . . . 127 836
. . . . . . . . . RC2 . . . . . 135 635
. . . . . . . . PLG2 . . . . 131 054
. . . . . . . . PLG61 . . . 131 204
. . . . . . . . PLG63 . . . . 115 094
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
PANEL, side RH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LABEL, warning electric shock and input pwr (FR) . . . . . . . . . . . . . . . . . . .
LABEL, warning electric shock and input pwr (CE) . . . . . . . . . . . . . . . . . . .
COVER, top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LABEL, warning general precautionary induction heat . . . . . . . . . . . . . . . .
LABEL, warning general precautionary wordless induction heat . . . . . . . .
PANEL, side LH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DOOR, primary board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HINGE, cont polyolefin copolymer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BRACKET, mtg fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FAN, muffin 24VDC 3000 RPM 130 CFM . . . . . . . . . . . . . . . . . . . . . . . . . . .
INSULATOR, side RH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HANDLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAGNET, permanent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CABLE, work ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PLUG, tw lk insul male . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG+PINS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING RCPT+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
+When ordering a component originally displaying a precautionary label, the label should also be ordered.
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-222 166 Page 58
. Hardware is common and
1
not available unless listed.
14
4
5
8
3
11
13
12
2
7
10
6
9
804 219-D
Figure 11-2. Front Panel
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 11-2. Front Panel
. . . 1 . . . . . . . . . . . . . 217 323 . . PANEL, front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 2 . . . . . . . . . . . . . 216 225 . . NAMEPLATE, ProHeat 35 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 3 . . . . . . . . . . . . . 216 224 . . PANEL, operator interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 4 . TC1−TC6 . . 218 686 . . RECEPTACLE ASSY, thermocouple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
. . . 5 . . . . . . . . . . . . . 217 327 . . PLATE, TC receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 6 . . . . S1 . . . . . 244 920 . . SWITCH, tgl 3pst 40A 600VAC scr term wide tgl . . . . . . . . . . . . . . . . . . . . 1
. . . 7 . . . . . . . . . . . . . 252 731 . . LABEL, warning read labels on/off storage temp . . . . . . . . . . . . . . . . . . . . . 1
. . . 8 . . . . . . . . . . . . . 221 493 . . LABEL, TC 1−6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 9 . . . . . . . . . . . . . . 115 440 . . STANDOFF, no 6-32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
. . . 10 . . . . . . . . . . . . . 224 143 . . GASKET, meter lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 11 . . PC10 . . . . 239 271 . . CIRCUIT CARD ASSY, display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 12 . . . PC2 . . . . . 239 231 . . CIRCUIT CARD ASSY, operator interface . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . PLG24 . . . . 115 091 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 13 . . . . . . . . . . . . . 247 615 . . GASKET, operator interface proheat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 14 . . . . . . . . . . . . . 246 430 . . DEFLECTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-222 166 Page 59
. Hardware is common and
12
not available unless listed.
5
13
10
9
14
1
7
2
4
6
3
8
804 220-A
11
Item
No.
Dia.
Mkgs.
Figure 11-3. Rear Panel
Part
No.
Description
Quantity
Figure 11-3. Rear Panel
. . . 1 . . . . . . . . . . . . . 217 324
. . . 2 . . . RC1 . . . . . 252 561
. . . 3 . . . . . . . . . . . . . 127 837
. . . 4 . . . CB1 . . . . . 089 807
. . . 5 . . . . . . . . . . . . . 220 824
. . . 6 . . . . . . . . . . . . +218 689
. . . 7 . . . . . . . . . . . . . 602 498
. . . 8 . . . . . . . . . . . . . 010 467
. . . 9 . . RC14 . . . . 143 976
. . . 10 . . . RC9 . . . . . 047 637
. . . 11 . . . . . . . . . . . . . 224 989
. . . . . . . . . . . . . . . . . . . 234 531
. . . 12 . . . . . . . . . . . . . 224 042
. . . 13 . . . . . . . . . . . . . 170 391
. . . 14 . . . . . . . . . . . . . 147 195
. . . . . . . RC21,22 . . . 135 635
. . . . . . PLG21,22 . . 131 054
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
PANEL, rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RECEPTACLE, w/leads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RECEPTACLE, tw lk insul fem (dinse type) . . . . . . . . . . . . . . . . . . . . . . . . .
SUPPLEMENTARY PROTECTOR, man reset 1P 2.5 A 250 VAC . . . . . .
COVER, receptacle weatherproof duplex . . . . . . . . . . . . . . . . . . . . . . . . . . .
PANEL, rear output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LABEL, danger high voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONNECTOR, clamp cable 1.250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RCPT W/SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG+PINS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RECEPTACLE ASSY, output (with leads) . . . . . . . . . . . . . . . . . . . . . . . . . . .
SHELL, w/contact pin and socket (service kit for 224 989) . . . . . . . . . . . .
CONNECTOR, circ CPC protective cap . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONNECTOR, circ MS protective cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NUT, 375−27 .54 hex .25 H nyl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING PLUG+PINS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOUSING RCPT+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
2
1
1
1
1
1
1
1
2
0
1
1
1
2
2
+When ordering a component originally displaying a precautionary label, the label should also be ordered.
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-222 166 Page 60
. Hardware is common and
14
not available unless listed.
1
4
14
12
3
6
2
5
10
13
3
7
6
9
16
15
8
Figure 11-4. Base w/Components
Item
No.
Dia.
Mkgs.
Part
No.
Description
804 221-D
Quantity
Figure 11-4. Base w/Components
. . . 1 . . . . . . . . . . . . . 217 328 . . FRAME, lifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 2 . . . . . . . . . . . . . 213 865 . . BASE ASSY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 3 . . . . . . . . . . . . . 213 939 . . LABEL, warning electric shock can kill significant . . . . . . . . . . . . . . . . . . . . 2
. . . 3 . . . . . . . . . . . . . 227 085 . . LABEL, warning electric shock can kill wordless 150 . . . . . . . . . . . . . . . . . 2
. . . 4 . . L1,L2 . . . . 218 692 . . INDUCTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 5 . . . . . . . . . . . . . 216 815 . . BRACKET, cap support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 6 . . . C1,2 . . . . 213 870 . . CAPACITOR, elctlt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 7 . . . . T1 . . . . . 213 583 . . TRANSFORMER, hf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 7 . . . . T1 . . . . . 227 065 . . TRANSFORMER, hf (400V model) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 8 . . . . . . . . . . . . . 216 629 . . BRACKET, fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 9 . FM1,FM2 . . 222 728 . . FAN, nuffin 48 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 10 . . . RC4 . . . . . . 115 090 . . HOUSING PLUG+PINS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 11 . . . . . . . . . . . . . 217 992 . . BAFFLE, air bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 12 . . . . . . . . . . . . . 224 973 . . INSULATOR, lift frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 13 . . . . . . . . . . . . . . 603 115 . . WEATHERSTRIPPING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 14 . . . . . . . . . . . . . 026 627 . . GASKET, lifting eye cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . PLG4 . . . . . 115 094 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 15 . . . . . . . . . . . . . 226 837 . . WASHER, rubber .343 id x .875 od x .093 thk . . . . . . . . . . . . . . . . . . . . . . 2
. . . 16 . . . . . . . . . . . . . 226 838 . . INSULATOR, capacitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-222 166 Page 61
. Hardware is common and
not available unless listed.
18
20
17
9
7
11
17
10
3
13
1
7
12
8
16
5
6
14
15
4
2
19
804 222-E
Figure 11-5. Top Windtunnel
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 11-5. Top Windtunnel
... 1 .............
... 2 .............
... 3 .............
. . . 4 . . . RT2 . . . . .
... 5 .............
... 6 .............
... 7 .............
... 8 .............
... 9 .............
...................
. . . 10 . . . PC5 . . . . .
. . . 11 . . . PC3 . . . . .
. . . 12 . . . . . . . . . . . . .
. . . 13 . . . . . . . . . . . . .
. . . 14 . . . . F1 . . . . .
. . . 15 . . . . . . . . . . . . .
. . . 16 . . . . . . . . . . . . .
. . . 17 . . . . . . . . . . . . .
. . . 18 . . . . . . . . . . . . .
. . . 19 . . . . . . . . . . . . .
. . . 20 . . . . . . . . . . . . .
OM-222 166 Page 62
218 424
218 684
025 248
222 327
083 147
605 339
098 691
217 326
250 975
229 382
239 257
239 236
208 591
212 038
225 514
225 553
229 382
227 863
247 231
246 866
251 158
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
WINDTUNNEL, top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HEAT SINK, AC commutator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STANDOFF, insul .250−20 x 1.250 lg x .437 thd . . . . . . . . . . . . . . . . . . . . .
THERMISTOR, ntc 30 k ohm at 25 deg C 24 in lead . . . . . . . . . . . . . . . . .
GROMMET, scr no 8/10 panel hole .312 sq .500 high . . . . . . . . . . . . . . . .
WASHER, TOOTH .377 ID X 0.507 OD X .022T stl pld . . . . . . . . . . . . . . .
STAND−OFF,NO 6−32 X .500 LG .250 hex stl m&f . . . . . . . . . . . . . . . . .
BRACKET, TC interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INSULATOR, tank cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SUPPORT, leads bridge output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
KIT, circuit card assy intrcnct bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CIRCUIT CARD ASSY, TC interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCREW, M 5− .8X 12 soc hd−torx stl pld sems . . . . . . . . . . . . . . . . . . . . . .
SCREW, M4 − .7 x 8.5 pan hd−phl stl pld . . . . . . . . . . . . . . . . . . . . . . . . . . .
FUSE, crtg 2. amp 600 V time delay . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOLDER, fuse crtg 30 A 600 V 13/32 X 1−1/2 LG . . . . . . . . . . . . . . . . . . .
SUPPORT, leads bridge output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STAND−OFF, no 6−32 X .750 lg .250 hex stl m&f . . . . . . . . . . . . . . . . . . .
COVER, tc board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CHOKE, common mode 12 turn w/rcpt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CAPACITOR ASSY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
4
1
2
2
6
1
1
1
1
1
12
8
1
1
1
1
1
1
1
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 11-5. Top Windtunnel
. . . . . . . . PLG32 . . . . 115 091 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . PLG33-38,54 . 131 204 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
. . . . . . PLG51,57 . . . 115 093 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . PLG58 . . . . 115 094 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . 227 082 . . CHOKE, common mode (400 V model only) . . . . . . . . . . . . . . . . . . . . . . . . 1
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-222 166 Page 63
. Hardware is common and
not available unless listed.
20
6
1
2
19
5
7
4
8
18
16
17
14
9
10
11
3
12
15
13
804 224-E
Figure 11-6. Right Windtunnel
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 11-6. Right Windtunnel
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
. . . . . . . . . . . . . 216 630
. . . . . . . . . . . . . 213 873
. . . . . . . . . . . . . 213 871
. . . . . . . . . . . . . 170 647
. . . . . . . . . . . . . 223 120
. . . . . . . . . . . . . . 115 443
. . . . . . . . . . . . . 145 743
. . . RT1 . . . . . 222 326
. . . . . . . . . . . . . 083 147
. . . . . . . . . . . . . 224 391
. . . . . . . . . . . . . 605 339
. . . PC4 . . . . . 239 240
. . . . . . . . . . . . . 212 038
. . . . . . . . . . . . . 176 879
. . . PC8 . . . . . 239 275
. . . . . . . . . . . . . 208 591
OM-222 166 Page 64
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
WINDTUNNEL, RH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HEAT SINK, current source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GROMMET, rbr sil 3.000 ID x 3.250 mtg hole . . . . . . . . . . . . . . . . . . . . . . .
BUSHING, snap-in nyl 1.312 ID x 1.500 mtg hole . . . . . . . . . . . . . . . . . . . .
BLOCK, term 115 amp 3 pole screw term . . . . . . . . . . . . . . . . . . . . . . . . . . .
STAND-OFF, no 6−32 x .750 lg .250 hex . . . . . . . . . . . . . . . . . . . . . . . . . . .
LUG, univ w/scr 600V 2−14 wire .250 stud . . . . . . . . . . . . . . . . . . . . . . . . .
THERMISTOR, ntc 30 k ohm at 25 deg C 34 in lead . . . . . . . . . . . . . . . . .
GROMMET, scr no 8/10 panel hole .312 sq .500 high . . . . . . . . . . . . . . . .
PANEL, insulating mtg capacitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WASHER, TOOTH .377 ID X 0.507 OD X .022T stl pld . . . . . . . . . . . . . . .
KIT, circuit card assy intrcnct I srce inpt . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCREW, M4 − .7 x 8.5 pan hd−phl stl pld . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCREW, M5 − .8 x 12 hex hd−phl 8.8 pld . . . . . . . . . . . . . . . . . . . . . . . . . . .
CIRCUIT CARD ASSY, bus intrcnct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCREW, M 5− .8X 12 soc hd−torx stl pld sems . . . . . . . . . . . . . . . . . . . . . .
1
1
2
1
1
5
1
1
2
1
2
1
2
12
1
14
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 11-6. Right Windtunnel (Continued)
. . . 17 . . . . . . . . . . . . . 229 728 . . STRAP, connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . 18 . . . PC6 . . . . . 239 262 . . CIRCUIT CARD ASSY, cooler control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 19 . . . . . . . . . . . . . 030 170 . . BUSHING, snap−in nyl .750 id x 1.000 mtg hole . . . . . . . . . . . . . . . . . . . . 1
. . . 20 . . . . . . . . . . . . . 231 050 . . ASSY, resistor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . PLG64,410,
411 . . . . . . 115 093 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
. . . . . . . . PLG47 . . . . 115 091 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . PLG45,61 . . 131 204 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . PLG62 . . . 201 665 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . PLG63 . . . . 115 094 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . PLG111, 112
121, 132,
141, 142 . . . 131 054 . . HOUSING RCPT+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-222 166 Page 65
. Hardware is common and
not available unless listed.
22
1
6
2
21
4
7
8
17
16
19
5
14
9
10
11
3
20
12
18
15
13
804 431-E
Figure 11-7. Right Windtunnel (400 V Model Only)
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 11-7. Right Windtunnel (400 V Model Only)
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
. . . . . . . . . . . . . 216 630
. . . . . . . . . . . . . 213 873
. . . . . . . . . . . . . 213 871
. . . . . . . . . . . . . 170 647
. . . PC9 . . . . . 239 284
. . . . . . . . . . . . . . 115 443
. . . . . . . . . . . . . 148 743
. . . RT1 . . . . . 222 326
. . . . . . . . . . . . . 083 147
. . . . . . . . . . . . . 224 391
. . . . . . . . . . . . . 605 339
. . . PC4 . . . . . 239 240
. . . . . . . . . . . . . 212 038
. . . . . . . . . . . . . 226 579
. . . . . . . . . . . . . 176 879
. . . . . . . . . . . . . 226 041
OM-222 166 Page 66
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
WINDTUNNEL, RH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HEAT SINK, current source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GROMMET, rbr sil 3.000 ID x 3.250 mtg hole . . . . . . . . . . . . . . . . . . . . . . .
BUSHING, snap-in nyl 1.312 ID x 1.500 mtg hole . . . . . . . . . . . . . . . . . . . .
CIRCUIT CARD ASSY, input filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STAND-OFF, no 6−32 x .750 lg .250 hex . . . . . . . . . . . . . . . . . . . . . . . . . . .
LUG, univ w/scr 600V 2−14 wire .250 stud . . . . . . . . . . . . . . . . . . . . . . . . .
THERMISTOR, ntc 30 k ohm at 25 deg C 34 in lead . . . . . . . . . . . . . . . . .
GROMMET, scr no 8/10 panel hole .312 sq .500 high . . . . . . . . . . . . . . . .
PANEL, insulating mtg capacitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WASHER, TOOTH .377 ID X 0.507 OD X .022T stl pld . . . . . . . . . . . . . . .
KIT, circuit card assy intrcnct I srce inpt . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCREW, M4 − .7 x 8.5 pan hd−phl stl pld . . . . . . . . . . . . . . . . . . . . . . . . . . .
SPACER, leads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCREW, M5 − .8 x 12 hex hd−phl 8.8 pld . . . . . . . . . . . . . . . . . . . . . . . . . . .
BRACKET, mtg ce filter ground plane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
2
1
1
5
1
1
6
1
2
1
2
1
12
1
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 11-7. Right Windtunnel (400 V Model Only) (Continued)
. . . 17 . . . PC6 . . . . . 239 262 . . CIRCUIT CARD ASSY, cooler control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 18 . . . PC8 . . . . . 239 275 . . CIRCUIT CARD ASSY, bus intrcnct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 19 . . . . . . . . . . . . . 208 591 . . SCREW, M 5− .8X 12 soc hd−torx stl pld sems . . . . . . . . . . . . . . . . . . . . . . 14
. . . 20 . . . . . . . . . . . . . 229 728 . . STRAP, connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . 21 . . . . . . . . . . . . . 030 170 . . BUSHING, snap−in nyl .750 id x 1.000 mtg hole . . . . . . . . . . . . . . . . . . . . 1
. . . 22 . . . . . . . . . . . . . 231 050 . . ASSY, resistor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . PLG64,410,
411 . . . . . . 115 093 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
. . . . . . . . PLG47 . . . . 115 091 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . PLG45,61 . . 131 204 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . PLG62 . . . 201 665 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . PLG63 . . . . 115 094 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . PLG111, 112
121, 132,
141, 142 . . . 131 054 . . HOUSING RCPT+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-222 166 Page 67
. Hardware is common and
12
not available unless listed.
1
10
8
2
6
13
7
14
3
15
5
4
11
9
804 225-A
Figure 11-8. Left Windtunnel
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 11-8. Left Windtunnel
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
1
2
3
4
5
6
7
8
9
10
11
11
12
13
14
15
. . . . . . . . . . . . . 216 631
. . . . . . . . . . . . . 218 683
. . . . . . . . . . . . . 170 647
. . . . . . . . . . . . . 025 248
. . . . . . . . . . . . . . 115 443
. . . . . . . . . . . . . 083 147
. . . RT3 . . . . . 222 327
. . . . . . . . . . . . . 030 170
. . . . . . . . . . . . . 218 430
. . . . . . . . . . . . . 220 825
. C7-C10 . . . 218 687
. C7-C10 . . . 225 775
. . . . T2 . . . . . 219 002
. . . PC7 . . . . . 239 266
. . . PC1 . . . . . 242 305
. . . . . . . . . . . . . 212 038
OM-222 166 Page 68
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
WINDTUNNEL, LH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HEAT SINK, diode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BUSHING, snap-in nyl 1.312 ID x 1.500 mtg hole . . . . . . . . . . . . . . . . . . . .
STAND-OFF, insul .250−20 x 1.250 lg x .437 thd . . . . . . . . . . . . . . . . . . . .
STAND-OFF, no 6−32 x .750 lg .250 hex . . . . . . . . . . . . . . . . . . . . . . . . . . .
GROMMET, scr no 8/10 panel hole .312 sq .500 high . . . . . . . . . . . . . . . .
THERMISTOR, ntc 30 k ohm at 25 deg C 24 in lead . . . . . . . . . . . . . . . . .
BUSHING, snap-in nyl .750 ID x 1.000 mtg hole . . . . . . . . . . . . . . . . . . . . .
COVER, access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BUS BAR, capacitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CAPACITOR, polyp film 1.35 uf 700 VAC +5% −0% . . . . . . . . . . . . . . . . . .
CAPACITOR, polyp film 1.10 uf 700 vac +5% −0% (400 V model only)
TRANSFORMER, control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
KIT, circuit card assy intrcnct I srce out . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CIRCUIT CARD ASSY, power source control . . . . . . . . . . . . . . . . . . . . . . .
SCREW, M4 − .7 x 8.5 pan hd−phl stl pld slffmg . . . . . . . . . . . . . . . . . . . . .
1
1
2
8
7
2
1
1
1
4
4
4
1
1
1
8
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 11-8. Left Windtunnel (Continued)
. . . . . . . PLG16,
121,122 . . . 131 054 . . HOUSING RCPT+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
. . . . . . . PLG19,
120 . . . . . . 115 094 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . PLG15,
118 . . . . . . 115 093 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . PLG77,
119 . . . . . . 115 092 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . PLG17 . . . . 115 091 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . PLG18,
116 . . . . . 131 056 . . HOUSING RCPT+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . PLG13,
113 . . . . . 162 382 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . PLG14 . . . 130 203 . . HOUSING PLUG+SKTS, (service kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-222 166 Page 69
. Hardware is common and
not available unless listed.
4
5
3
2
1
3
4
6
7
8
1
9
804 300-A
Figure 11-9. Hermaphroditic Blank Plug Assy
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 11-9. Hermaphroditic Blank Plug Assy 224 260
...
...
...
...
...
...
...
...
...
1
2
3
4
5
6
7
8
9
.............
.............
.............
.............
.............
.............
.............
.............
.............
221 440
221 443
221 099
136 343
224 261
254 886
254 885
221 442
253 842
..
..
..
..
..
..
..
..
..
O-RING, .737 ID x .103 CS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SOCKET ASSY, radsok 14 mm cable end . . . . . . . . . . . . . . . . . . . . . . . . . .
CLAMP, strain relief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCREW, K50 x 20 pan hd-phl stl pld pt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CAP, plug assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COLLAR, coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RETAINER, contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PIN, radsok 14 mm cable end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SHELL ASSY, connector - protective plug . . . . . . . . . . . . . . . . . . . . . . . . . .
2
1
2
2
1
1
1
1
1
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-222 166 Page 70
4
1
3
2
6
7
5
8
804 324-A
Figure 11-10. Air−Cooled Output Extension Cables
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 11-10. Air−Cooled Output Extension Cables 195 404, 195 405, And 300 362
...
...
...
...
...
...
...
...
1
2
3
4
5
6
7
8
.............
.............
.............
.............
.............
.............
.............
.............
253 841
254 886
221 099
136 343
254 887
224 259
228 296
197 635
..
..
..
..
..
..
..
..
SHELL ASSY, connector − air cooled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Collar, coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clamp, strain relief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCREW, k50x 20 pan hd−phl stl pld pt thread forming . . . . . . . . . . . . . . . .
SHELL, connector cable female with seal . . . . . . . . . . . . . . . . . . . . . . . . . .
CLAMP, strain relief socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCREW, ka35x10 pan hd−phl sst pln pt thread forming . . . . . . . . . . . . . . .
LABEL, warning flexible induction cords . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
2
2
2
4
4
2
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-222 166 Page 71
4
1
2
3
6
5
6
7
5
11
8
4
9
10
3
804 411-A
Figure 11-11. Liquid−Cooled Output Extension Cables
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 11-11. Liquid−Cooled Output Extension Cables (195 402, 195 403, And 300 180)
...
...
...
...
...
...
...
...
...
...
...
1
2
3
4
5
6
7
8
9
10
11
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
.............
253 840
254 886
221 099
136 343
210 912
204 954
254 889
254 890
224 258
228 296
197 635
..
..
..
..
..
..
..
..
..
..
..
Connector Shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Coupling Collar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Strain Relief Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screw K50 x 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Protective Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Quick Connect Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connector Shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Coupling Collar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Strain Relief Pin Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screw KA35x10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warning Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
2
2
4
4
2
2
4
4
1
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-222 166 Page 72
2
3
1
6
4
5
6
804 404-A
Figure 11-12. Heating Cables
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 11-12. Heating Cables (300 045, 300 046, 300 047, And 300 049)
...
...
...
...
...
...
1
2
3
4
5
6
.............
.............
.............
.............
.............
.............
254 887
204 954
210 912
224 259
228 296
197 635
..
..
..
..
..
..
Connector Shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Plastic Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Protective Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Strain Relief Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screw, KA35x10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warning Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
2
2
4
4
2
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-222 166 Page 73
1
201 432-G
Figure 11-13. Quick Connect To Quick Connect Hose
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 11-13. Quick Connect To Quick Connect Hose (204 877)
. . . 1 . . . . . . . . . . . . . . 204955 . . Ftg, Plstc Coupler Qdisc X 1/4 Npt Female . . . . . . . . . . . . . . . . . . . . . . . . . 2
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-222 166 Page 74
Effective January 1, 2011
(Equipment with a serial number preface of MB or newer)
Warranty Questions?
Call
1-800-4-A-MILLER
for your local
Miller distributor.
Your distributor also gives
you ...
Service
You always get the fast,
reliable response you
need. Most replacement
parts can be in your
hands in 24 hours.
Support
Need fast answers to the
tough welding questions?
Contact your distributor.
The expertise of the
distributor and Miller is
there to help you, every
step of the way.
This limited warranty supersedes all previous Miller warranties and is exclusive with no other
guarantees or warranties expressed or implied.
LIMITED WARRANTY − Subject to the terms and conditions 6. 90 Days — Parts
below, Miller Electric Mfg. Co., Appleton, Wisconsin, warrants to its
* Accessory (Kits)
original retail purchaser that new Miller equipment sold after the
* Canvas Covers
effective date of this limited warranty is free of defects in material
* Induction Heating Coils and Blankets, Cables, and
and workmanship at the time it is shipped by Miller. THIS
Non-Electronic Controls
WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
* M-Guns
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE
* MIG Guns and Subarc (SAW) Guns
WARRANTIES OF MERCHANTABILITY AND FITNESS.
* Remote Controls and RFCS-RJ45
Within the warranty periods listed below, Miller will repair or replace
* Replacement Parts (No labor)
any warranted parts or components that fail due to such defects in
* Roughneck Guns
material or workmanship. Miller must be notified in writing within
* Spoolmate Spoolguns
thirty (30) days of such defect or failure, at which time Miller will
provide instructions on the warranty claim procedures to be
followed.
Miller shall honor warranty claims on warranted equipment listed
below in the event of such a failure within the warranty time
periods. All warranty time periods start on the delivery date of the
equipment to the original end-user purchaser, and not to exceed
one year after the equipment is shipped to a North American
distributor or eighteen months after the equipment is shipped to an
International distributor.
1.
2.
3.
4.
5.
5 Years Parts — 3 Years Labor
* Original main power rectifiers only to include SCRs,
diodes, and discrete rectifier modules
3 Years — Parts and Labor
* Engine Driven Welding Generators
(NOTE: Engines are warranted separately by the
engine manufacturer.)
* Inverter Power Sources (Unless Otherwise Stated)
* Plasma Arc Cutting Power Sources
* Process Controllers
* Semi-Automatic and Automatic Wire Feeders
* Smith 30 Series Flowgauge and Flowmeter
Regulators (No Labor)
* Transformer/Rectifier Power Sources
* Water Coolant Systems (Integrated)
2 Years — Parts
* Auto-Darkening Helmet Lenses (No Labor)
1 Year — Parts and Labor Unless Specified
* Automatic Motion Devices
* CoolBelt and CoolBand Blower Unit (No Labor)
* External Monitoring Equipment and Sensors
* Field Options
(NOTE: Field options are covered for the remaining
warranty period of the product they are installed in, or
for a minimum of one year — whichever is greater.)
* Flowgauge and Flowmeter Regulators (No Labor)
* RFCS Foot Controls (Except RFCS-RJ45)
* Fume Extractors
* HF Units
* ICE Plasma Cutting Torches (No Labor)
* Induction Heating Power Sources, Coolers, and
Electronic Controls/Recorders
* Load Banks
* Motor Driven Guns (w/exception of Spoolmate
Spoolguns)
* PAPR Blower Unit (No Labor)
* Positioners and Controllers
* Racks
* Running Gear/Trailers
* Spot Welders
* Subarc Wire Drive Assemblies
* Water Coolant Systems (Non-Integrated)
* Weldcraft-Branded TIG Torches (No Labor)
* Wireless Remote Foot/Hand Controls and Receivers
* Work Stations/Weld Tables (No Labor)
6 Months — Parts
* Batteries
* Bernard Guns (No Labor)
* Tregaskiss Guns (No Labor)
Miller’s True Blue Limited Warranty shall not apply to:
1.
2.
3.
Consumable components; such as contact tips,
cutting nozzles, contactors, brushes, relays, work
station table tops and welding curtains, or parts that
fail due to normal wear. (Exception: brushes and
relays are covered on all engine-driven products.)
Items furnished by Miller, but manufactured by others,
such as engines or trade accessories. These items are
covered by the manufacturer’s warranty, if any.
Equipment that has been modified by any party other than
Miller, or equipment that has been improperly installed,
improperly operated or misused based upon industry
standards, or equipment which has not had reasonable
and necessary maintenance, or equipment which has
been used for operation outside of the specifications for
the equipment.
MILLER PRODUCTS ARE INTENDED FOR PURCHASE AND
USE BY COMMERCIAL/INDUSTRIAL USERS AND PERSONS
TRAINED AND EXPERIENCED IN THE USE AND
MAINTENANCE OF WELDING EQUIPMENT.
In the event of a warranty claim covered by this warranty, the
exclusive remedies shall be, at Miller’s option: (1) repair; or (2)
replacement; or, where authorized in writing by Miller in
appropriate cases, (3) the reasonable cost of repair or
replacement at an authorized Miller service station; or (4) payment
of or credit for the purchase price (less reasonable depreciation
based upon actual use) upon return of the goods at customer’s risk
and expense. Miller’s option of repair or replacement will be F.O.B.,
Factory at Appleton, Wisconsin, or F.O.B. at a Miller authorized
service facility as determined by Miller. Therefore no
compensation or reimbursement for transportation costs of any
kind will be allowed.
TO THE EXTENT PERMITTED BY LAW, THE REMEDIES
PROVIDED HEREIN ARE THE SOLE AND EXCLUSIVE
REMEDIES. IN NO EVENT SHALL MILLER BE LIABLE FOR
DIRECT,
INDIRECT,
SPECIAL,
INCIDENTAL
OR
CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF
PROFIT), WHETHER BASED ON CONTRACT, TORT OR ANY
OTHER LEGAL THEORY.
ANY EXPRESS WARRANTY NOT PROVIDED HEREIN AND
ANY
IMPLIED
WARRANTY,
GUARANTY
OR
REPRESENTATION AS TO PERFORMANCE, AND ANY
REMEDY FOR BREACH OF CONTRACT TORT OR ANY
OTHER LEGAL THEORY WHICH, BUT FOR THIS PROVISION,
MIGHT ARISE BY IMPLICATION, OPERATION OF LAW,
CUSTOM OF TRADE OR COURSE OF DEALING, INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR PARTICULAR PURPOSE, WITH RESPECT TO
ANY AND ALL EQUIPMENT FURNISHED BY MILLER IS
EXCLUDED AND DISCLAIMED BY MILLER.
Some states in the U.S.A. do not allow limitations of how long an
implied warranty lasts, or the exclusion of incidental, indirect,
special or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty provides specific
legal rights, and other rights may be available, but may vary from
state to state.
In Canada, legislation in some provinces provides for certain
additional warranties or remedies other than as stated herein, and
to the extent that they may not be waived, the limitations and
exclusions set out above may not apply. This Limited Warranty
provides specific legal rights, and other rights may be available,
but may vary from province to province.
miller_warr 2011−01
Owner’s Record
Please complete and retain with your personal records.
Model Name
Serial/Style Number
Purchase Date
(Date which equipment was delivered to original customer.)
Distributor
Address
City
State
Zip
For Service
Contact a DISTRIBUTOR or SERVICE AGENCY near you.
Always provide Model Name and Serial/Style Number.
Contact your Distributor for:
Welding Supplies and Consumables
Options and Accessories
Personal Safety Equipment
Service and Repair
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Replacement Parts
Training (Schools, Videos, Books)
Technical Manuals (Servicing Information
and Parts)
Circuit Diagrams
For International Locations Visit
www.MillerWelds.com
Welding Process Handbooks
To locate a Distributor or Service Agency visit
www.millerwelds.com or call 1-800-4-A-Miller
Contact the Delivering Carrier to:
File a claim for loss or damage during
shipment.
For assistance in filing or settling claims, contact
your distributor and/or equipment manufacturer’s
Transportation Department.
ORIGINAL INSTRUCTIONS − PRINTED IN USA
International Headquarters−USA
USA Phone: 920-735-4505 Auto-Attended
USA & Canada FAX: 920-735-4134
International FAX: 920-735-4125
 2011 Miller Electric Mfg. Co.
2011−01