Miele G 1542 Operating instructions

Operating instructions
for dishwashers
To avoid the risk of accidents or
damage to the appliance, it is
essential to read these instructions
as well as the installation plan before
it is installed and used for the
first time.
en - GB
M.-Nr. 06 992 161
Contents
Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Appliance overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Disposal of your old appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Energy saving washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
To open the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
To close the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Safety lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Before using the appliance for the first time you require: . . . . . . . . . . . . . . . . . . . 15
To call up the water hardness level in the display. . . . . . . . . . . . . . . . . . . . . . . . . 15
External water softening system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Filling the salt reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Salt indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Rinse aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Adding rinse aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Rinse aid indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Setting the rinse aid dosage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Loading the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Items not suitable for dishwashers: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Upper basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Removable spiked insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Hinged cup rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Positioning rail (depending on model) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Support rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Adjusting the upper basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Lower basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Vario inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Bottle holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Cutlery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Cutlery tray (depending on model). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Cutlery basket (depending on model) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
2
Contents
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Adding detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Selecting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Starting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Time display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Glass care indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Programme sequence indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
At the end of a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Switching off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Unloading the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Interrupting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Changing a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Additional functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Extra options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Turbo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Combi tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Delay start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Factory default setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Adjust Sensor wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Cleaning the wash cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Cleaning the door and the door seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Cleaning the door front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Checking the filters in the wash cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Cleaning the filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Cleaning the spray arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Technical problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Water inlet / drain fault . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
General problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Unsatisfactory washing result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Cleaning the water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Cleaning the drain pump and non-return valve . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
3
Contents
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Future updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
For testing institutes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
The Miele waterproof anti-leak system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
4
Guide to the appliance
Appliance overview
a Upper spray arm (not visible)
g Filter combination
b Cutlery tray (depending on model)
h Data plate
c Upper basket
i Child safety lock in door grip (not
visible)
d Middle spray arm
e Air inlet for drying
(depending on model)
f Lower spray arm
j Rinse aid reservoir
k Dual compartment detergent
dispenser
l Salt reservoir
5
Guide to the appliance
Control panel
a Programmes
g Check/Refill indicators
b Glass care indicator
h Start/Stop button with indicator light
c Time display
i Delay start button
with indicator light
d Extra options with indicator lights
e Programme sequence indicators
f On/Off button K
j Extra options button
k Programme selector button
This instruction book applies to several different dishwasher models.
The specific dishwasher models below are referred to as follows:
G 1542, G 1552 etc. = G 1XXX
G 2542, G 2552 etc. = G 2XXX
The model numbers G 1XXX and G 2XXX used in this book refer to the model
designation specified on the data plate of the appliance (and not the
description on the control panel).
The data plate is located at the top right hand side of the door.
6
Warning and Safety instructions
Safety with children
This appliance conforms to current
safety requirements. Inappropriate
use can, however, lead to personal
injury and damage to property.
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before using it for the first time. They
contain important information on its
safety, use and maintenance.
Keep these instructions in a safe
place and pass them on to any
future owner.
Correct application
~ This dishwasher is intended
exclusively for cleaning domestic
crockery and cutlery in a domestic
household. Using it for purposes other
than those for which it was designed,
as well as any alterations or
conversions to the appliance, would be
unauthorised and could cause harm.
The manufacturer cannot be held liable
for damage resulting from improper or
incorrect use of the appliance.
~ This dishwasher is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless they
are supervised whilst using it or they
have been given instruction concerning
its use by a person responsible for their
safety.
~ This appliance is not a toy! To avoid
the risk of injury, keep children well
away and do not allow them to play in
or around the dishwasher, or to use the
controls. They will not understand the
potential dangers posed by it. They
should be supervised whenever you
are working in the kitchen. There is a
danger that children playing might shut
themselves in the dishwasher.
~ Older children may only use the
dishwasher when its operation has
been clearly explained to them and
they are able to use it safely,
recognising the dangers of misuse.
~ Keep children away from
detergents. Dishwasher detergents
contain irritant and corrosive
ingredients which can cause burning in
the mouth, nose and throat if
swallowed, or inhibit breathing. Keep
children away from the dishwasher
when the door is open. There could still
be detergent residues in the cabinet.
Consult a doctor immediately if your
child has swallowed or inhaled
detergent.
7
Warning and Safety instructions
Technical safety
~ Do not connect the dishwasher to
~ Before setting up the appliance,
the mains supply until it has been fully
installed.
check it for any externally visible
damage. Under no circumstances
should you use a damaged appliance.
A damaged appliance could be
dangerous.
~ The dishwasher must only be
plugged into the electricity supply via a
suitable switched socket. The electrical
socket must be easily accessible after
the dishwasher has been installed so
that it can be disconnected from the
electricity supply at any time. (See
"Electrical connection").
~ There must be no electrical sockets
behind the dishwasher. Danger of
overheating and fire risk if the
dishwasher were to be pushed up
against a plug.
~ The dishwasher must not be
installed under a hob. The high radiant
temperatures which are sometimes
generated by a hob could damage the
dishwasher. For the same reason it
should not be installed next to open
fires or other appliances which give off
heat, such as heaters etc.
8
~ Before connecting the appliance,
check that the connection data on the
data plate (voltage and connected
load) match the mains electricity
supply. If in any doubt, consult a
qualified electrician.
~ The electrical safety of this
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system. It is
most important that this basic safety
requirement is present and regularly
tested and where there is any doubt the
electrical system in the house should
be checked by a qualified electrician.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
~ Do not connect the appliance to the
mains electricity supply by a
multi-socket unit or an extension lead.
These do not guarantee the required
safety of the appliance (e.g. danger of
overheating).
Warning and Safety instructions
~ This equipment may only be
installed in mobile installations such as
ships if a risk assessment of the
installation has been carried out by a
suitably qualified engineer.
~ A damaged appliance could be
~ The plastic housing of the water
connection contains an electrical
component. The housing must not be
dipped in water.
~ Unauthorised repairs could result in
~ There are live wires in the water inlet
hose. Never cut the water inlet hose,
even if it is too long.
~ The integrated Waterproof System
offers protection from water damage,
provided the following conditions are
met:
– The dishwasher is correctly installed
and plumbed in.
dangerous. If the dishwasher gets
damaged, switch it off at the mains and
call your Miele Dealer or the Miele
Service Department.
unforeseen dangers for the user, for
which Miele cannot accept liability.
Repairs should only be undertaken by a
Miele approved service technician.
~ Faulty components must only be
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
~ Always disconnect the dishwasher
from the electrical supply for
maintenance work (switch off at the wall
socket and remove the plug).
– The dishwasher is properly
maintained and parts are replaced
where it can be seen that this is
necessary.
~ If the connection cable is damaged
– The stopcock has been turned off
when the appliance is not used for a
longer period of time (e.g. during
holidays).
~ In countries where there are areas
The Waterproof system will work even if
the appliance is switched off. However,
the appliance must remain connected
to the electricity supply.
it must be replaced with a Miele cable
by a Miele approved service technician
only.
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the guarantee.
9
Warning and Safety instructions
Installation
Correct use
~ The dishwasher must be installed
and connected in compliance with the
installation instructions.
~ Do not use solvents in the
~ The dishwasher must be correctly
detergent. Dishwasher detergents
contain irritant or corrosive ingredients
which can cause burning in the nose,
mouth and throat if swallowed, or inhibit
breathing. Consult a doctor immediately if detergent has been swallowed or
inhaled.
aligned to ensure problem-free
operation.
~ In order to ensure stability,
built-under and integrated dishwashers
must only be installed under a
continuous worktop which is secured to
adjacent cabinetry.
~ If you want to convert your
freestanding dishwasher to a
built-under ("U") model, you will need to
order the appropriate conversion kit. If
you remove the existing plinth, you
must replace it with a U-model plinth.
This is necessary to avoid the risk of
injury caused by protruding metal
parts.
dishwasher. Danger of explosion.
~ Do not inhale or ingest dishwasher
~ Avoid leaving the door open
unnecessarily, as you could trip over it.
~ Do not sit or lean on the opened
door. This could cause the dishwasher
to tip and be damaged, and you could
get injured.
~ Only use detergent and rinse aid
formulated for domestic dishwashers.
Do not use washing-up liquid.
~ Do not use commercial or industrial
detergents as these may cause
damage, and there is a risk of severe
chemical reaction.
~ Do not fill the rinse aid reservoir with
powder or liquid detergent. This will
cause serious damage to the reservoir.
10
Warning and Safety instructions
~ Inadvertently filling the salt reservoir
with powder or liquid dishwasher
detergent will damage the water
softener. Make sure you have picked
up the correct packet of dishwasher
salt before filling the salt reservoir!
~ Please only use special coarse
grained dishwasher salt for reactivation,
as other salts may contain insoluble
additives which can impair the
functioning of the softener.
~ In an appliance with a cutlery basket
(depending on model) cutlery is
cleaned and dried more efficiently if
placed in the basket with the handles
downwards. However, to avoid the risk
of injury, place knives and forks etc.
with the handles upwards.
~ Plastic items which cannot withstand
being washed in hot water, such as
disposable plastic containers, or plastic
cutlery and crockery should not be
cleaned in the dishwasher. The high
temperatures in the dishwasher may
cause them to melt or lose shape.
Accessories
~ Only use genuine Miele spare parts
and accessories with this appliance. If
spare parts or accessories from other
manufacturers are used, this will
invalidate the guarantee, and Miele
cannot accept liability.
Disposal of your old
dishwasher
~ Make the door lock inoperative so
that children cannot accidentally shut
themselves in. Make appropriate
arrangements for the disposal of the
appliance.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
~ On models with "Delay start", make
sure that the dispenser is dry before
adding detergent. Wipe dry if
necessary. Detergent will clog if poured
into a damp dispenser and may not be
thoroughly dispersed.
11
Caring for the environment
Disposal of the packing
material
The transport and protective packing
has been selected from materials which
are environmentally friendly for disposal
and can normally be recycled.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation.
Disposal of your old appliance
Electrical and electronic appliances
often contain materials which, if
handled or disposed of incorrectly,
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your appliance.
Please do not therefore dispose of your
old appliance with your household
waste.
The packaging consists of the following
materials:
Outer packaging:
– Corrugated cardboard made from up
to 100% recyclable material,
or: Polyethylene (PE) shrink wrap
– Polyproplylene (PP) strapping
Inner packaging:
– Chlorine and fluorine free expanded
polystyrene (EPS)
– Base, lid frame and support battens
made from untreated natural wood
from renewable forests.
– Polyethylene (PE) protective wrap
Rather than just throwing these
materials away, please ensure they are
recycled.
12
Please dispose of it at your local
community waste collection/recycling
centre and ensure that it presents no
danger to children while being stored
for disposal.
To enable sorting by type of plastic for
recycling, all plastic parts of the
appliance are labelled with international
standard symbols.
Caring for the environment
Energy saving washing
This dishwasher is exceptionally
economical in its use of water and
electricity. You can make the most of
your appliance by following these tips:
^ If your household water system is
suitable, this dishwasher can be
connected to a hot water supply for
further economies. If the water is
heated by for example, solar panels,
this would be energy efficient.
However, if your water is heated by
electricity we would recommend
connection to cold water.
^ For most economical dishwashing,
make full use of the baskets without
overloading the dishwasher.
^ Choose the programme to suit the
type of crockery being washed and
the degree of soiling.
^ Select the Energy save programme
for energy-saving dishwashing.
^ Follow the detergent manufacturer's
recommendations on detergent
dosage.
^ When using powder or liquid
detergent, you can use 1/3 less
detergent if baskets are only half full.
13
Before using for the first time
To open the door
Safety lock
^ Press the release catch inside the
door grip upwards and pull the door
open.
Use the safety lock to prevent children
opening the dishwasher door.
If the door is opened during operation
all functions are automatically
interrupted.
To close the door
^ Push the baskets right in.
^ Then lift the door upwards and push
until it clicks into position.
14
^ To lock the door, push the slide
underneath the door grip to the right.
^ To unlock the door, push the slide to
the left.
Before using for the first time
Before using the appliance for
the first time you require:
To call up the water hardness
level in the display
– Approx. 1 kg dishwasher salt*,
After your dishwasher has been
through one programme cycle, you can
check the water hardness level
measured by the water softener sensor
in the display.
This is shown in °d - German scale, and
can fluctuate depending on the quality
of the water.
– Domestic dishwasher detergent*,
– Rinse aid* formulated for domestic
dishwashers.
* Miele branded products are
available from the Miele Spare Parts
Department or via the internet at
www.miele-shop.com.
Every dishwasher is tested at the
factory.
There will be residual water in the
appliance from this test. It is not an
indication that it has been used
previously.
This dishwasher is fitted with a water
softener sensor which automatically
sets the water softener unit for the
local water hardness level.
^ Switch the dishwasher off using the
On/Off button K.
^ Press the Start/Stop button in and
whilst holding it in switch the
dishwasher on using the the On/Off
button K.
Keep the Start/Stop button pressed in
until the Start/Stop indicator comes
on.
If this does not happen, start the
procedure from the beginning again.
^ Press the Delay start button six times.
The Delay start indicator will flash
briefly six times at intervals.
The number after the p in the display is
the water hardness level in °d.
^ Switch the dishwasher off using the
On/Off button K.
15
Before using for the first time
External water softening
system
The number after the p in the display is
the water hardness level in °d.
If your dishwasher is connected to an
external water softening system which
uses salt to reactivate, you will still need
to programme the dishwasher to the
correct water hardness level to achieve
good cleaning results.
^ Use the Start/Stop button to select
the value which equates to the water
hardness level of the water supplied
by the external water softening
system.
Each press on the button moves you
up a level. When the highest water
hardness level is reached, the setting
starts from the beginning again.
Set the water softener unit of the
dishwasher to the water hardness level
of the water which is supplied from the
external water softening system.
If you do not know what it is, set the
dishwasher for 8 °d (1.4 mmol/l).
^ Switch the dishwasher off using the
On/Off button K.
^ Press the Start/Stop button in and
whilst holding it in switch the
dishwasher on using the On/Off
button K.
Keep the Start/Stop button pressed in
until the Start/Stop indicator comes
on.
If this does not happen, start the
procedure from the beginning again.
^ Press the Delay start button twice.
The Delay start indicator will flash
briefly twice at intervals.
16
^ Switch the dishwasher off using the
On/Off button K.
If you disconnect the dishwasher
from the external water softening
system, set the value to P0.
Before using for the first time
Filling the salt reservoir
In order to achieve good cleaning
results, the dishwasher needs to
operate with soft water. Hard water
results in the build-up of calcium
deposits on crockery and in the
dishwasher.
Mains water with a hardness level
higher than 0.7 mmol/l (4 °d – German
scale) needs to be softened. This takes
place automatically in the integrated
softener unit.
The softener unit is suitable for a water
hardness level of up to 12.6 mmol/l
(70 °d). It requires dishwasher salt.
If you use combination products
which have salt in them in your
dishwasher, such as "3 in 1" or
"4 in 1" products, you should still
add salt in order to achieve optimum
results and to ensure that the water
softener continues to function
correctly. Selecting the Combi tabs
option reduces salt consumption to
between 1/3 and 1/4 of the normal
amount.
If the water in your area is very soft
and constantly lower than
0.7 mmol/l (4 °d) you should still
add salt before using the
dishwasher for the first time. Salt
should only be replenised when the
salt indicator light comes on. In
areas with very soft water this could
be after a long period of time.
,Inadvertently filling the salt
reservoir with powder or liquid
dishwasher detergent will damage
the water softener. Make sure you
have picked up the correct packet
of dishwasher salt before filling the
salt reservoir!
,Only use special coarse grained
dishwasher salt for reactivation. Do
not use other salts such as cooking
salt, agricultural grade or gritting
salt. These may contain insoluble
additives which can impair the
functioning of the water softener.
17
Before using for the first time
^ When filling the salt reservoir only
open the door halfway to ensure
that all the salt gets into the reservoir.
^ Press the button on the lid of the salt
reservoir in the direction of the arrow
until the flap springs open.
Do not fill the salt reservoir with
water.
^ Add salt only until the reservoir is full
or until water runs out of the opening.
The salt reservoir holds approx. 1 kg
of salt, depending on the brand
used.
Do not add any more than 1 kg of
salt.
As the salt reservoir is filled, displaced
water may overflow.
^ Clean any excess salt from around
the reservoir opening, and then close
the flap.
^ Lift up the funnel.
18
^ Run the Quick wash programme immediately (without any crockery in
the dishwasher, and without selecting
the Turbo extra option) to remove any
traces of salt from the cabinet.
Before using for the first time
Salt indicator
^ Fill the salt reservoir with dishwasher
salt when the salt indicator light
comes on. (If it comes on during a
programme, wait until the end of the
programme).
After the reservoir has been filled, the
water softener is automatically
reactivated the next time the
dishwasher is run. The salt refill
indicator may still be illuminated during
this process. It will go out once the salt
concentration has reached the correct
level.
,After filling the salt reservoir, run
the Quick wash programme immediately (without any crockery in the
dishwasher, and without selecting
the Turbo extra option) to remove
any traces of salt from the cabinet.
Miele branded dishwasher salt is
available from the Miele Spare Parts
Department or via the internet at
www.miele-shop.com.
19
Before using for the first time
Rinse aid
Rinse aid is necessary to ensure water
does not cling and leave marks on
crockery during the drying phase and
helps crockery dry faster after it has
been washed.
Rinse aid is poured into the storage
reservoir and the amount set is
dispensed automatically.
If you only ever use combination
products in your dishwasher, you do
not need to add rinse aid.
Adding rinse aid
,Inadvertently filling the rinse aid
reservoir with powder or liquid
detergent will damage the reservoir.
Only pour rinse aid formulated for
domestic dishwashers into the
reservoir.
Miele branded rinse aid is available
from the Miele Spare Parts
Department or via the internet at
www.miele-shop.com.
Alternatively, it is possible to use
– Household vinegar with a max. 5%
acid content
or
– Liquid citric acid up to 10% acid
content.
The resulting rinsing and drying quality
will not, however, be as good as when
rinse aid is used.
,Do not use vinegar with a higher
acid content (e.g. vinegar essence
25% acid). This would damage the
dishwasher.
20
^ Press the button on the lid of the
rinse aid reservoir in the direction of
the arrow until the flap springs open.
Before using for the first time
Rinse aid indicator
When the light comes on the reservoir
contains sufficient rinse aid for 2 - 3
programmes only.
^ Add rinse aid in plenty of time.
If the "Combi tab" function has been
selected the rinse aid indicator light
will not come on (see "Additional
functions, Extra options").
^ Add rinse aid only until it is visible in
the opening.
The rinse aid reservoir holds approx.
110 ml.
^ Close the flap firmly so that it clicks
into place. Otherwise water can enter
the rinse aid reservoir during a
programme.
^ Wipe up any spilled rinse aid. This
prevents over-foaming occurring
during the next programme.
21
Before using for the first time
Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from
approx. 0-6 ml. It is set to a
recommended setting of approx. 3 ml
at the factory.
^ Press the Delay start button three
times.
The "Delay start" indicator will flash
briefly three times at intervals.
p 3 will flash in the Time display.
This means that the rinse aid dosage
has been set to 3 ml at the factory.
If spots appear on crockery and
glassware:
The dosage set will show in the Time
display after the p.
^ Increase the rinse aid dosage.
^ Use the Start/Stop button to select
the rinse aid dosage you want.
The dosage amount alters each time
you press the button.
If clouding or smearing appears on
crockery and glassware:
^ Decrease the rinse aid dosage.
^ Switch the dishwasher off with the
On/Off button K.
^ Press the Start/Stop button in and
whilst holding it in switch the
dishwasher on using the On/Off
button K.
Keep the Start/Stop button pressed in
until the "Start/Stop" indicator light
comes on.
If this does not happen, start the
procedure from the beginning again.
22
The programmed rinse aid dosage is
now stored in memory.
^ Switch the dishwasher off with the
On/Off button K.
Loading the dishwasher
Note
Remove coarse food residues from
crockery.
There is no need to rinse items under
running water.
,Do not wash items soiled with
ash, sand, wax, lubricating grease
or paint in the dishwasher.
Ash does not dissolve and is
distributed in the wash cabinet.
Wax, sand, lubricating grease and
paint cause damage to the
dishwasher.
Crockery can be loaded anywhere in
the baskets, but the following notes
should be observed:
– Do not place crockery and cutlery
inside other pieces where they may
be concealed.
– Load the crockery so that water can
access all surfaces. This ensures
that they get properly cleaned.
– Wide based items should be placed
at an angle so that water can run off
them freely.
– The spray arms must not be blocked
by items which are too tall or hang
through the baskets.
If in doubt, test for free movement by
manually rotating the spray arms.
– Make sure that small items cannot
fall through the holders in the
baskets. Small items, e.g. lids,
should therefore be placed in the
cutlery tray or cutlery basket
(depending on model).
Some foodstuffs may contain natural
dyes, e.g. carrots, tomatoes or
ketchup. Plastic items in the
dishwasher may discolour if large
quantities of these foodstuffs find
their way into the appliance on the
crockery. The stability of plastic
items is not affected by this
discolouration.
– Make sure that all items are securely
positioned.
– Hollow items such as cups, glasses,
pans, etc. must be inverted in the
basket.
– Tall, narrow, hollow items, e.g.
champagne glasses, should be
placed in the centre of the basket to
ensure better water coverage.
23
Loading the dishwasher
Items not suitable for
dishwashers:
– Wooden cutlery and crockery or
items with wooden parts: these may
discolour and fade. The glue used in
these items is not dishwasher-proof
and wooden handles may come
loose after being washed in a
dishwasher.
– Craft items, antiques, valuable vases
and decorative glassware are also
not suitable for dishwashers.
– Plastic items which are not heat
resistant: the high temperatures in
the dishwasher may cause them to
melt or lose shape.
We recommend:
– When purchasing new crockery and
cutlery, make sure they are
dishwasher-proof.
– If delicate glassware is washed in the
dishwasher ensure that only very low
temperatures are used (see
programme chart), or a special
glass-care programme is used
(depending on model). This will
reduce the risk of clouding.
– Wash particularly delicate glassware
by hand.
Please note
– Colours painted over a glaze may
fade after a number of washes.
Silverware previously cleaned with a
silver polish may still be damp or
spotted at the end of a programme,
where water has not run off smoothly. It
may need to be rubbed dry with a soft
cloth.
– Clouding may occur on glasses after
frequent washing. Do not wash
delicate glassware, or glassware
containing lead crystal in a
dishwasher.
Silver which has been in contact with
foods containing sulphur can discolour.
These include egg yolk, onions,
mayonnaise, mustard, pulses, fish, fish
brine and marinades.
– Copper, brass, tin and aluminium
items may discolour or become matt.
,Aluminium components (e.g.
grease filters) must not be cleaned
with caustic alkaline commercial or
industrial cleaning agents. These
may damage the material, or in
extreme cases, cause a severe
chemical reaction. See section
"Adding detergent" for information
on suitable detergents.
24
Loading the dishwasher
Upper basket
,For safety reasons, do not
operate the dishwasher without the
upper and lower baskets in place.
Removable spiked insert
The spiked insert can be removed to
make more room for larger items such
as casserole dishes.
To remove the insert a:
^ Use the upper basket for small,
lightweight and delicate items such
as cups, saucers, glasses, dessert
bowls, etc. Shallow pans or casserole
dishes can also be placed in the
upper basket.
^ Long items such as soup ladles,
mixing spoons and long knives
should be placed lying down across
the front of the upper basket.
^ Pull it upwards by the handle as
shown.
To replace the insert b:
^ Fit the insert into the lower basket
with the hooks going under the cross
piece as illustrated.
^ Press down on the handle until the
insert is held securely in position.
25
Loading the dishwasher
Hinged cup rack
Positioning rail (depending on model)
^ To make room for tall items, raise the
rack upwards.
Glasses can be arranged along the
positioning rail to give them some
support during the programme.
G 2XXX models:
You can set the cup rack at two
different heights.
^ Raise the rail, and lean the glasses
against it.
^ Pull the cup rack upwards and click it
back into position at the required
height.
26
The positioning rail can be flipped over
to the middle of the basket for easy
sorting and removing of crockery.
Loading the dishwasher
Support rail
This support is designed to hold tall
glasses and glasses with stems
securely.
^ Lower the support and lean tall
glasses against it.
^ You can also remove a section of the
cutlery tray to make more room for
tall glasses.
27
Loading the dishwasher
Adjusting the upper basket
In order to gain more space for taller
pieces of crockery in the bottom or
upper basket, the upper basket can be
adjusted on three levels with 2 cm
between each level.
The upper basket can also be set at an
angle with one side high and the other
side low. This can be useful to help
prevent water collecting in deep dishes
etc. Ensure, however, that the basket
can be inserted smoothly into the
cabinet. It is better to adjust the basket
before loading it.
Depending on the setting of the upper
basket, the following plate dimensions
can be accommodated.
Dishwasher with cutlery tray
(see data plate for model number)
Upper
basket
level
Plate C in cm
Upper basket
G1XXX G2XXX
Lower
basket
Top
15
19
31
Middle
17
21
29
Bottom
19
23
27
^ Pull out the upper basket.
Dishwasher with cutlery basket
(see data plate for model number)
Upper
basket
level
Plate C in cm
Upper basket
G1XXX G2XXX
To raise the upper basket:
^ Pull the basket up until it clicks into
place.
To lower the upper basket:
^ Pull upwards on the levers at either
side of the upper basket.
^ Adjust the basket to the desired
height and then push the levers
securely back down into position.
28
Lower
basket
Top
20
24
31
Middle
22
26
29
Bottom
24
28
27
Loading the dishwasher
Lower basket
Vario inserts
The vario inserts are used for washing
cups, glasses, plates, saucers, pots
and pans.
^ For larger and heavier items such as
plates, serving platters, saucepans,
bowls, etc.
Small items such as saucers can also
be placed in the lower basket.
Do not place thin, delicate glassware
in the lower basket.
^ The cup rack can be raised to make
more room for tall items.
^ Stem glassware e.g. wine glasses or
champagne flutes can be leaned
against the cup rack or suspended
from it.
29
Loading the dishwasher
Narrow vario insert
Bottle holder
You can remove the narrow vario insert
to make more room for larger items of
crockery, e.g. a large, flat pot, or
another type of insert:
The bottle holder can be used to wash
narrow items, e.g. milk and baby
bottles.
To remove it:
^ Press the insert downwards a and
press the catch inwards at the same
time b.
To replace it:
^ Position the narrow vario insert in the
back right hand side of the lower
basket.
^ Fit the insert into the lower basket
with the hooks going under the long
cross-piece as illustrated.
^ Press down on the insert until it clicks
into position
30
^ It can be inserted into the bottom
basket in more than one place. See
the areas marked in white in the
illustration.
However, do not place a bottle holder
in the corners. Water will not be able
to access the bottles properly, and
they will not get clean.
Loading the dishwasher
Cutlery
Cutlery tray (depending on model)
If spoon handles do not fit between the
holders, then lay them the other way
round.
^ Arrange the cutlery in the tray as
shown.
To make unloading much easier,
cutlery should be grouped in zones,
one for knives, one for forks, one for
spoons, etc.
Spoon heads should be placed in
contact with at least one of the serrated
retainers on the base of the cutlery tray
to ensure that water runs off them
freely.
The upper spray arm must not be
blocked by items which are too big
(e.g. cake slices).
The cutlery tray inserts are removable.
For example, you can remove one
insert to make room for larger items of
crockery in the upper basket.
31
Loading the dishwasher
Cutlery basket (depending on model)
^ To avoid the risk of injury, knives and
forks should be placed with the
handles upwards in the basket.
However, cutlery placed handle
down in the basket will come out
cleaner and drier.
^ Fit it into the cutlery basket if
required.
^ Place small spoons in the individual
slots to either side of the cutlery
basket.
Cutlery insert for the cutlery basket
Use the insert supplied for heavily
soiled spoons.
The insert separates the items so that
they can be more easily accessed by
water.
32
^ Insert cutlery with the handles facing
downwards, and distribute them
evenly along the insert.
Operation
Detergent
,Only use detergents formulated
for domestic dishwashers. Do not
use washing-up liquid.
Miele branded dishwasher cleaning
products are available from the Miele
Spare Parts Department or via the
Internet at www.miele-shop.com.
Active ingredients
Modern detergents contain various
active ingredients, the most important
of which are:
– Phosphates to prevent calcification.
– Alkalis to aid removal of dried on
soiling.
– Enzymes to break down starch and
loosen protein.
– Oxygen based bleaching agents to
remove coloured stains (e.g. tea,
coffee, tomato sauce).
Most dishwasher detergents contain
phosphates and are mildly alkaline with
enzymes and oxygen based bleaching
agents. Phosphate free products are
rare.
Types of detergent:
– Powder and liquid gel detergents.
These detergents allow you to adjust
the amount dispensed according to
the size of load and level of soiling.
– Tab detergents. These are suitable
for most levels of soiling.
A variety of combination products is also
available (see section "Additional
functions, Combi-tab", depending on
model).
In addition to detergent, combi tabs
contain rinse aid and salt substitutes.
Combi tabs are available as "3 in 1" or,
when they also contain other components
such as glass and stainless steel
protective additives and enhanced
cleaning power, as "4 in 1", "5 in 1" etc.
Refer to the manufacturer's packaging as
to whether the combi tabs are suitable for
the water hardness level in your area.
Please note that the cleaning and drying
results of tab detergents can vary greatly.
For optimum cleaning and drying
results use Miele dishwasher
detergent and add Miele salt and
Miele rinse aid separately.
Dispensing
^ Follow the dosage recommended by
the manufacturer on the packaging.
^ Unless directed otherwise, use one
detergent tab or add 20 to 30 ml
detergent in compartment II,
depending on the level of soiling.
With very heavy soiling you can also
add a small amount of detergent to
compartment l (see "Programme
chart").
^ Do not use tabs with the "Quick"
programme, as they will not dissolve
properly.
Failure to dispense the
recommended amount of detergent
may impair cleaning results.
33
Operation
,Avoid inhalation of powder
detergents and do not ingest
dishwasher detergent. Dishwasher
detergents contain irritant or corrosive
ingredients which can cause burning
in the nose, mouth and throat if
swallowed, or inhibit breathing.
Consult a doctor immediately if
detergent has been swallowed or
inhaled.
Keep detergent and other household
agents out of the reach of children at
all times. Keep children away from the
dishwasher when the door is open.
There could still be detergent residues
in the cabinet. To avoid the danger of
children coming into contact with the
dishwasher detergent, only add
detergent just before starting the
programme and close the door,
activating the child safety lock (if your
dishwasher is fitted with one).
Adding detergent
The flap is always open at the end of a
programme.
^ Add the required amount of
detergent and close the flap.
^ Make sure that the detergent
packaging is properly closed after
use to avoid it getting damp and
becoming lumpy.
For information
Compartment I holds max. 10 ml,
Compartment II holds max. 50 ml.
There are markings in compartment II
to assist with dispensing: 20, 30. The
marks indicate a level of approx. 20 or
30 ml when the door is open in a
horizontal position.
^ Press the opening catch on the
detergent dispenser. The flap will
spring open.
34
Operation
Switching on
Starting a programme
^ Make sure the spray arms are not
obstructed.
^ Select the programme required with
the programme selector button.
^ Close the door.
The indicator light for the programme
selected comes on.
The programme duration will appear in
hours and minutes in the Time display.
^ Open the stopcock, if it is closed.
^ Switch the dishwasher on with the
On/Off button K.
The Start/Stop indicator light flashes
and the indicator light comes on next to
the last programme selected.
Selecting a programme
Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
Chart later on in this booklet.
You can now select an additional
function (see "Additional functions").
^ Press the Start/Stop button.
The programme will begin. The
indicator lights for Start/Stop,
Wash/Rinse and the programme
selected will light up.
If the Turbo and/or Combi tabs extra
options have been selected the
relevant indicator light(s) will also come
on.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
35
Operation
Time display
The duration of the programme
selected appears in hours and minutes
in the Time display before the
programme begins. During the
programme the time left until the end of
the programme is displayed.
The time displayed may vary with the
same programme. This is partly
because of the water temperature at
each intake, and partly because of the
amount of crockery and how dirty it is.
When a programme is selected for the
first time, the display shows an average
time for a cold water intake.
The times shown in the programme
chart refer to standard test loads and
temperatures.
Each time a programme is run, the
electronic unit takes the new conditions
into account, and calculates the time
required.
Glass care indicator
The green Glass care indicator light will
come on when you select a programme
that is suitable for glassware.
36
Programme sequence
indicators
After a programme has been started,
the current stage of the programme is
indicated by the programme sequence
indicator lights.
At the end of a programme
0 appears in the Time display when the
programme has finished.
The dishwasher can now be opened
and unloaded (see "Unloading the
dishwasher").
,To prevent the risk of steam
damage to the worktop edging
above the dishwasher, it is
advisable to leave the door closed
until you are ready to unload the
crockery. Alternatively you can open
the door fully until the crockery is
cool enough to unload. Do not leave
the door only partially open.
Operation
Switching off
Interrupting a programme
At the end of a programme:
A programme is interrupted as soon as
the door is opened.
When the door is closed again, the
programme will continue from the point
it was at before the door was opened.
^ Switch the dishwasher off with the
On/Off button K.
The dishwasher will continue to use
electricity until it is switched off with
the On/Off button K.
If the dishwasher is not going to be
used for a longer period of time, e. g.
whilst on holiday, the stopcock should
be turned off.
Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
If you open the door fully after switching
off, the dishes will cool much faster.
^ First unload the lower basket, then
the upper basket and cutlery tray
(depending on model).
This will prevent water drops from the
upper basket and cutlery tray from
falling onto the dishes in the lower
basket.
,Water in the dishwasher may be
hot. Danger of scalding.
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. Before
closing the door again, leave it ajar
for approx. 20 seconds. This will
enable the temperature in the wash
cabinet to settle. Then close the
door firmly, making sure that it clicks
into place.
Changing a programme
If the detergent dispenser flap has
already opened, do not change the
programme.
If a programme has already started and
you wish to change it, proceed as
follows:
^ Press the Start/Stop button for at
least one second.
The programme will be cancelled.
^ Select the programme you want, and
then start it.
37
Additional functions
Extra options
Combi tabs
The "Extras" button is used for selecting
the "Turbo" and "Combi tabs" options.
To ensure excellent results you can
programme your dishwasher for the
type of detergent you are using.
Use the Extras button to select between
standard detergents (powder, liquid
and 2 in 1 tabs) and combination tabs
(3 in 1 / 4 in 1 tabs etc.).
^ Switch the dishwasher on with the
On/Off button K.
The Start/Stop indicator light will flash.
^ Press the "Extras" button repeatedly
until the indicator light for the option
you want comes on.
The option selected is active on all
programmes until the setting is
changed.
^ You can now start a programme or
switch the dishwasher off using the
On/Off button K.
Turbo
The "Turbo" function is used to reduce
the duration of programmes in which
this function is available.
In order to achieve optimum cleaning
results consumption rates are
increased with this option.
If a full programme is not yet required
the "Turbo" function can be used in
conjunction with the "Quick wash"
programme to rinse off dirty crockery.
The programme sequence is then
adapted to suit the type of detergent
selected. Depending on the
programme, the duration can be
considerably longer.
If the "Combi tabs" indicator does not
light up, the dishwasher is set for standard detergent.
If the "Combi tabs" indicator lights up,
the programme sequence will be
adapted to suit detergents that contain
rinse aid and salt as well as other
components where applicable.
The rinse aid dispenser and the rinse
aid indicator light are deactivated.
Salt consumption for reactivating the
water softener is reduced to 1/3 to 1/4 of
the normal amount.
Do not select the "Combi tabs" option if
your water hardness level is above
3.8 mmol/l or 21 °d.
Follow the detergent manufacturer's
instructions.
The cleaning and drying
performance of these types of
detergent can vary enormously.
38
Additional functions
Delay start
The start time of a programme can be
delayed, e.g. to benefit from economy
rates of electricity. A delay start time of
between 30 minutes and 24 hours can
be selected.
With a delay start time of between 30
minutes and 9 hours 30 minutes, the
time is set in 30 minute increments. For
10 hours or more it is set in one hour
increments.
When using the Delay start function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry with a cloth if
necessary. If the compartment is
wet, powder detergent can become
lumpy and stick to the dispenser,
with the result that it is not fully
dispensed.
Do not use liquid detergent when
selecting Delay start, as it can run
into the dishwasher before it is
required.
^ Switch the dishwasher on with the
On/Off button K.
The Start/Stop indicator light will flash.
^ Select the programme required with
the programme selector button.
^ Press the Delay start button.
The last Delay start time used will
appear in the Time display. The Delay
Start indicator light comes on.
^ Set the time required using the Delay
start button.
^ Press the Start/Stop button.
The Start/Stop indicator light will light
up constantly.
39
Additional functions
The time starts counting down until the
programme start time: in 1 hour steps
for delay start periods of over 10 hours,
and in minutes for delay start periods of
under 10 hours.
Starting a programme before the
Delay start period has elapsed:
At the end of the delay period, the
programme selected begins
automatically. The time left for a
programme to run then shows in the
display, the Delay start indicator light
goes out and the Start/Stop indicator
light comes on.
^ Press the Start/Stop button for at
least one second.
How the Delay start time is shown in
the Time display:
The programme will begin. The
Start/Stop indicator light will light up
constantly.
up to 59 minutes:
e.g. 30 minutes = 30
between 1 hour and 9 hours 30
minutes:
e.g. 5 hours = 5.00
10 hours and over:
e.g. 15 hours = 15^
,To prevent children coming into
contact with dishwasher detergent
do not fill the detergent dispenser
until just before starting the
programme, i.e. before pressing the
Start/Stop button, and activate the
safety lock.
40
A programme can be started before the
Delay start period has elapsed.
Proceed as follows:
The Delay start indicator light will go out
and the Start/Stop indicator light will
flash.
^ Press the Start/Stop button again.
Additional functions
Factory default setting
If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings as
follows:
^ Switch the dishwasher off with the
On/Off button K.
^ Press the Start/Stop button in and
whilst holding it in switch the
dishwasher on using the On/Off
button K.
Keep the Start/Stop button pressed in
until the "Start/Stop" indicator light
comes on.
The flashing sequence in the Time
display shows whether a setting other
than the factory default setting has
been set.
– "p 1": All settings are set to factory
default settings.
– "p 0": At least one setting has been
changed.
^ To reset the dishwasher to the factory
default settings, press the Start/Stop
button.
^ Switch the dishwasher off with the
On/Off button K.
If this does not happen, start the
procedure from the beginning again.
^ Press the Delay start button twelve
times.
The Delay start indicator light will give
one long flash and two brief flashes at
intervals and "p 0" or "p 1" will flash in
the Time display.
41
Additional functions
Adjust Sensor wash
You can adjust the Sensor wash
programme so that it will remove
stubborn soiling in a lightly soiled load.
^ Switch the dishwasher off with the
On/Off button K.
^ Press the Start/Stop button in and
whilst holding it in switch the
dishwasher on using the On/Off
button K.
Keep the Start/Stop button pressed in
until the "Start/Stop" indicator light
comes on.
If this does not happen, start the
procedure from the beginning again.
^ Press the Delay start button five
times.
The "Delay start" indicator will flash
briefly five times at intervals.
42
The message flashing in the Time
display shows whether the "Adjust
Sensor wash" function is activated or
deactivated.
– "p 1": The "Adjust Sensor wash"
function is activated.
– "p 0": The "Adjust Sensor wash"
function is deactivated.
^ To change the setting, press the
Start/Stop button.
Switch the dishwasher off with the
On/Off button K.
Cleaning and care
Check your dishwasher regularly
(approx. every 4 - 6 months). This
way faults and problems can be
avoided.
* Miele branded cleaning and
conditioning products are available
from the Miele Spare Parts
Department or via the Internet at
www.miele-shop.com.
,The outer surfaces of the
dishwasher are susceptible to
scratching.
Contact with unsuitable cleaning
agents can alter or discolour the
outer surfaces.
Cleaning the wash cabinet
The wash cabinet is largely
self-cleaning, provided that the correct
amount of detergent is always used.
If, however, there are limescale or
grease deposits in the cabinet, these
can be removed with a proprietary
dishwasher cleaner* or conditioner*.
^ When the dishwasher is being loaded,
food and drink residues may drip onto
the sides of the dishwasher door.
These surfaces are outside the wash
cabinet and are not accessed by
water from the spray arms. Any
soiling should be wiped off these
surfaces before the door is closed.
Cleaning the door front
,Remove any soiling immediately.
If not, it might become impossible to
remove and could cause the outer
surface to alter or discolour.
^ Clean the front using a damp Miele
microfibre E-cloth* or with a sponge
and a solution of hot water and
washing-up liquid. Then dry with a soft
cloth.
To avoid damaging the outer surface,
do not use:
– cleaning agents containing soda,
ammonia, acids or chlorides,
– cleaning agents containing
descaling agents,
– abrasive cleaning agents, e.g.
powder cleaners and cream cleaners.
Cleaning the door and the door – solvent-based cleaning agents,
seal
– stainless steel cleaning agents,
^ Wipe the door seals regularly with a
damp cloth to remove food deposits.
– dishwasher cleaner,
– oven sprays,
– glass cleaning agents,
– hard, abrasive sponges and
brushes, e.g. pot scourers,
– sharp metal scrapers.
43
Cleaning and care
Checking the filters in the
wash cabinet
Cleaning the filters
^ Switch the dishwasher off.
The filter combination in the base of the
wash cabinet retains coarse soil from
the suds solution, preventing it
accessing the circulation system and
re-entering the cabinet through the
spray arms.
,This dishwasher must not be
used without all the filters in place.
Collection of coarse soil may cause the
filters to clog. The level of soiling and
time it takes before the filters need
cleaning will vary depending on use.
You should check the filters regularly.
This dishwasher has a "Check filter"
indicator light which comes on after
every 40 programme cycles as a
reminder to check the filters in the wash
cabinet.
^ Check the filter combination
whenever the "Check filter" indicator
light comes on.
^ Clean it, if necessary.
The "Check filter" indicator light will go
out when the dishwasher is switched
off.
44
^ Turn the handle anti-clockwise to
release the filter combination a.
^ Lift the filter combination out of the
dishwasher b. Remove any coarse
particles and rinse the filter well
under running water. Use a nylon
brush if necessary.
Cleaning and care
To clean the inside of the filter, the flap
must be opened:
^ Press catches a together in the
direction of the arrows as shown,
and open the filter b.
^ Rinse all the filters under running
water.
^ Then close the flap so that the catch
engages.
^ Replace the filter combination so that
it lies flat in the base of the wash
cabinet.
^ Then turn the handle clockwise to
lock the filter combination in place.
,Take care when you are fitting
the filter combination that it is
secured in position correctly.
Otherwise coarse soil could get into
the circulation system and cause a
blockage.
45
Cleaning and care
Cleaning the spray arms
^ Remove the lower basket.
Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be inspected
and cleaned regularly (approx. every
4 - 6 months).
^ Switch the dishwasher off.
Remove the spray arms as follows:
^ Take out the cutlery tray (if your
dishwasher is fitted with one).
^ Push the top spray arm upwards to
engage the inner ratchet. Then
unscrew the spray arm.
^ Push the middle spray arms upwards
a to engage the ratchet. Then
unscrew the spray arm b.
^ Pull the lower spray arm firmly
upwards to remove it.
^ Use a pointed object to push food
particles into the spray arm jets.
^ Rinse thoroughly under running
water.
^ Replace the spray arms and check
that they rotate freely.
46
Problem solving guide
With the aid of the following guide, minor problems can be easily corrected
without calling in a Miele service technician, saving you both time and money.
,Repairs should only be carried out by a suitably qualified and trained
person in strict accordance with current local and national safety regulations.
Unauthorised or incorrect repairs could cause personal injury or damage to the
appliance.
Technical problems
Problem
The Start/Stop indicator
does not flash after the
dishwasher has been
switched on using the
On/Off button K.
Possible cause
The appliance is not
plugged in.
The fuse is defective or
has tripped.
The dishwasher stops
during a programme.
The fuse is defective or
has tripped.
Remedy
Insert the plug and switch
on at the socket.
Reset or replace the fuse.
(Minimum fuse rating see data plate).
Reset or replace the fuse.
(Minimum fuse rating see data plate).
47
Problem solving guide
Problem
Possible cause
The buzzer sounds.
There may be a
The Wash/Rinse and
technical fault.
Drying indicator lights
flash simultaneously.
Fault code FXX shows
in the Time display.
Remedy
– Switch the dishwasher off
with the On/Off button K.
After a few seconds:
– Switch the dishwasher
back on.
– Select the programme
required with the
programme selector
button.
– Press the Start/Stop button.
If the programme sequence
indicator lights flash again,
there is a technical fault.
– Call the Service
Department.
The drain pump works Fault F70:
– Close the stopcock.
even when the door is The Waterproof System – Call the Service
open.
has reacted.
Department.
48
Problem solving guide
Water inlet / drain fault
Problem
The buzzer sounds.
The Inlet/Drain check
indicator alternately
flashes and lights up
constantly.
Possible cause
Remedy
The stopcock is
closed.
Open the stopcock fully.
Before rectifying the problem
you must:
– Switch the dishwasher off
with the On/Off button K.
– Open the stopcock fully.
– Clean the water inlet filter
(see "Maintenance").
– The water pressure at the
intake is lower than 30 kPa
(0.3 bar).
Seek professional advice.
Fault F11:
– Clean the filter combination.
See "Cleaning and care".
Water outlet is
restricted, water
– Clean the drain pump. See
remains in the wash
"Maintenance".
cabinet at the end of a – Clean the non-return valve.
programme.
See "Maintenance".
– Remove any kink in the drain
hose.
The buzzer sounds.
The dishwasher stops
during a programme.
The Inlet/Drain check
indicator flashes.
Faults F12/F13:
Fault code FXX shows Water inlet restricted.
in the display.
49
Problem solving guide
General problems
Problem
The Salt indicator light
starts flashing
Possible cause
The salt reservoir lid
has not been closed
correcly.
The dishwasher stops. The salt reservoir lid
The Salt indicator starts has not be closed
correctly.
flashing.
The Wash/Rinse and
Drying indicators flash
at the same time.
Fault code F86 shows
in the display.
Remedy
Close it properly.
The Spray arm indicator Items are blocking
light is flashing.
the path of the
middle spray arm.
The middle spray
arm jets are blocked.
Open the dishwasher door and
rearrange the items which are
obstructing the spray arm.
– Switch the dishwasher off
with the On/Off button K.
Then:
– Clean the spray arm. See
"Cleaning and care".
50
– Switch the dishwasher off
with the On/Off button K.
– Close the salt reservoir lid
properly.
– Start the programme again.
Problem solving guide
Problem
Possible cause
Remedy
Detergent residue is
left in the dispenser at
the end of a
programme.
The detergent
dispenser lid cannot
be closed properly.
The dispenser was still
damp when detergent
was added.
Make sure the dispenser is
dry before adding detergent.
Clogged detergent
residue is blocking the
catch.
This is caused by the
At the end of a
programme there is a drying system and does
film of moisture on the not indicate a fault.
inside of the door and
the interior walls.
Water remains in the
wash cabinet at the
end of a programme.
Clean the detergent from the
catch.
The moisture will dissipate
after a short while.
Before rectifying the problem
you must:
– Switch the dishwasher off
with the On/Off button K.
The filter combination in Clean the filter combination.
the wash cabinet is
See "Cleaning and care".
clogged.
The drain pump or
Clean the drain pump or the
non-return valve may be non-return valve. See
blocked.
"Maintenance".
The drain hose is
Remove any kink from the
kinked.
drain hose.
51
Problem solving guide
Noises
Problem
Knocking noise in the
wash cabinet.
Possible cause
A spray arm is knocking
against an item in a
basket.
Rattling noise in the
wash cabinet.
Items of crockery are
insecure in the wash
cabinet.
Knocking noise in the
water pipes.
This may be caused by
the on-site installation or
the cross-section of the
piping.
52
Remedy
Interrupt the programme,
and rearrange the items
which are obstructing the
spray arm.
Interrupt the programme,
and rearrange the items of
crockery.
This has no influence on
dishwasher function. If in
doubt, contact a suitably
qualified plumber.
Problem solving guide
Unsatisfactory washing result
Problem
The dishes are not
clean.
Possible cause
The dishes were not loaded
correctly.
The programme was not
powerful enough.
Remedy
See notes in "Loading the
dishwasher"
Select a more intensive
programme. See
"Programme chart".
There is some stubborn
Use the Adjust Sensor wash
soiling although most of the function (see "Additional
crockery is only lightly soiled functions").
(e.g. with tea stains).
Not enough detergent was
dispensed.
Items are blocking the path
of the spray arms.
The filter combination in the
base of the wash cabinet is
not clean or is not correctly
fitted.
This may cause the spray
arm jets to get blocked.
The non-return valve is open
and blocked. Dirty water has
flowed back into the wash
cabinet.
Smearing appears The rinse aid dosage is set
on glassware and too high.
cutlery, there is a
bluish sheen on the
surface of
glassware; film can
be wiped off.
Use more detergent, or
change your detergent.
Rearrange the items so that
the spray arms can rotate
freely.
Clean and/or fit the filter
combination correctly. Clean
the spray arm jets. See
"Cleaning and care".
Clean the drain pump and
the non-return valve. See
"Maintenance - Cleaning the
drain pump and non-return
valve".
Reduce the dosage. See
"Before using for the first
time - Rinse aid".
53
Problem solving guide
Problem
Possible cause
Remedy
Dishes, cutlery and The amount of rinse aid may Replenish the reservoir,
glasses are not dry be insufficient, or the rinse
increase the dosage or
or are flecked.
aid reservoir empty.
change the brand of rinse
aid. See Before using for the
first time.
Leave it in for longer. See
Crockery was taken out of
the cabinet too soon.
Operation.
Combination tabs have been Set the Combi tab function to
used which have impaired
Normal, and fill the rinse aid
drying performance.
reservoir with rinse aid. See
"Additional functions".
The Combi tab function has
been selected, but the
wrong type of detergent was
used.
Not enough rinse aid was
used.
Set the Combi tab function to
the detergent product being
used (see "Additional
functions").
Increase the dosage. See
Before using for the first time
- Rinse aid.
Fill the salt reservoir. See
Before using for the first time
- Filling the salt reservoir.
An unsuitable combination
detergent has been used.
Change your detergent. Use
a standard liquid, tablet or
powder detergent.
White residue is
visible on cutlery
and crockery,
clouding occurs
There is no salt in the salt
on glassware; film reservoir.
can be wiped off.
There is a fault with the auto- Call the Service Department.
matic water softening
system.
54
Problem solving guide
Problem
Possible cause
Remedy
Glassware has a
brown or blue tinge,
and film cannot be
wiped off.
Glassware is dull
and discoloured;
film cannot be wiped
off.
This may be caused by the
detergent.
Change your detergent.
The glassware is not
dishwasher-proof. The
surfaces are affected.
There is no remedy.
Purchase glassware which
is dishwasher-proof.
Tea or lipstick stains The wash temperature of
have not been
the selected programme
completely removed. was too low.
The bleaching effect of the
detergent used is too low.
Select a programme with a
higher wash temperature.
Natural dyes e.g. from
carrots, tomatoes or
ketchup may be the cause.
The amount of detergent
used or its bleaching effect
was not sufficient to deal
with natural dyes.
There are rust stains The affected items are not
on cutlery.
corrosion resistant.
Use more detergent. See
Operation.
Discolouration is irreversible.
Plastic items are
discoloured.
A programme was not run
after dishwasher salt was
added. Traces of salt have
got into the wash cycle.
Change your detergent.
There is no remedy.
Purchase cutlery which is
dishwasher-proof.
Always run the Quick wash
programme, without any
crockery in the dishwasher
and without selecting the
Turbo function (if present),
after adding dishwasher
salt.
55
Maintenance
Cleaning the water inlet filter
A filter is incorporated in the screw
connection of the valve on the water
inlet hose. The filter must be cleaned
when dirty, otherwise insufficient water
flows into the wash cabinet.
,The plastic housing of the water
connection contains an electrical
component. It must not be dipped in
water.
Recommendation
If the mains water contains a large
amount of insoluble substances, we
recommend fitting a large-area filter in
the connection between the stopcock
and the water inlet hose threaded
union. This filter is available from the
Miele Spares Parts dept.
Cleaning the filter:
^ Disconnect the dishwasher from the
mains supply. Switch off at the mains
socket and withdraw the plug.
^ Close the stopcock.
^ Unscrew the inlet hose.
56
^ Carefully remove the seal.
^ Withdraw the filter using pointed
pliers and rinse clean under running
water.
^ Replace the filter and seal, making
sure they are sitting correctly.
^ Reconnect the inlet hose to the
stopcock, making sure it goes on
correctly and is not cross-threaded.
^ Turn on the stopcock gradually to
test for leaks. If there is a leak, the
inlet hose might not be on securely,
or it may have been screwed on at an
angle. Unscrew and reconnect the
water inlet valve correctly.
Maintenance
Cleaning the drain pump and
non-return valve
If the water has not been pumped away
at the end of a programme the drain
pump or the non-return valve might be
blocked. They are, however, easy to
clean.
^ Disconnect the dishwasher from the
mains supply. Switch off at the mains
socket and withdraw the plug.
^ Take the filter combination out of the
wash cabinet (see "Cleaning and
care - Cleaning the filters in the wash
cabinet").
^ Scoop the water out of the cabinet
using a suitable container or utensil.
The drain pump is situated under the
non-return valve (see arrow).
^ Remove all foreign objects from the
drain pump (watch out for glass or
bone splinters which are particularly
difficult to detect and could cause
injury). Turn the drain pump impeller
by hand to check that there are no
more obstructions. You will feel a little
resistance when you turn the
impeller.
^ Carefully replace the non-return valve
and secure it with the catch.
,Ensure that the catch engages
correctly.
^ Press the catch for the non-return
valve inwards a.
^ Lift out the non-return valve b, and
rinse well under running water.
^ Remove all foreign objects from the
non-return valve.
57
Programme chart
Programme
When to use
Sensor wash
Sensor controlled programme
for normally soiled crockery
Quick wash
40°C
Quick wash programme for lightly soiled crockery, e.g. party crockery;
for flushing out salt residues after replenishing the salt reservoir;
includes sensor controlled glass care system;
not suitable for tablet detergents.
In conjunction with the Turbo option, it can be used for rinsing crockery to avoid
smells, if a complete cycle is not yet needed. The heater elements do not come on.
Sensor wash
gentle #
Sensor controlled "Glass care" programme
for lightly soiled, heat-sensitive glassware and crockery;
use 50% less detergent than required for a full load.
Light soiling
50°C
With a shorter wash time for lightly to normally soiled crockery
where soiling has not dried on;
includes sensor controlled glass care system.
Energy save 1)
For normally soiled crockery where soiling has not dried on.
Energy saving programme using low temperatures and a longer wash duration;
includes sensor controlled glass care system.
Pots & pans
75°C
For very heavily soiled crockery and normally soiled pots, pans, dishes etc with
dried on soiling; use 20% more detergent than recommended for a full load.
Hygiene
Programme with special parameters for hygienic removal of bacteria from baby
bottles, chopping boards, utensils etc.
1) Standard programme for energy labelling.
58
Programme chart
Programme sequence
Energy
Prewash
Main
wash
°C
Interim
rinse
1
2
Final
rinse
°C
Drying
If
required
45 - 65
If
required
65
X
40
If
required
X
40 - 48
X
45
If
required
Duration 2)
Consumption
X
Hot
water
connection
(55 °C)
h:min
Litres
Cold
water
connection
(15 °C)
h:min
0.95-1.35 0.70-1.00
10-17
1:36-2:38 1:23-2:21
0.55
55
Water
Hot
water
connection
(55 °C)
kWh
Cold
water
connection
(15 °C)
kWh
0.20
0.70-0.95 0.40-0.50
10
10-17
0:33
0:22
1:26-2:02 1:17-1:43
50
X
65
X
1.05
0.75
10
1:36
1:23
45
X
60
X
1.05
0.70
10
2:49
2:40
75
X
65
X
1.50
1.10
13
2:42
2:31
70
X
1.40
1.16
13
2:14
2:05
70
X
2) Values quoted are in accordance with EN 50242. The durations given can vary depending on
individual circumstances and the effect the sensors have on the product.
Selecting the "Turbo" function can reduce the programme duration by up to 50 minutes with an
increase in energy consumption of up to 0.2 kWh.
When the "Combi tabs" function is selected, energy consumption may increase by up to 0.2 kWh and
the programme duration by up to 15 minutes.
On G 2XXX models (see data plate), the max. energy consumption is 0.1 kWh and the water
consumption is up to 1 litre higher.
59
After sales service
Repairs
Future updates
In the event of any faults that you
cannot remedy yourself, please
contact:
The programme update function (PC =
Programme Correction) is designed to
enable a service technician to update
your appliance's electronics in keeping
with advances in technology.
– Your Miele dealer, or
– the Miele Customer Contact Centre
(see back cover for address).
^ When contacting your Dealer or
Miele, please quote the model type
and number of your appliance, both
of which are shown on the data plate
on the right hand side of the door.
Please note that telephone calls may
be monitored and recorded for
training purposes.
The "PC" indicator light is used as the
interface for this programming.
Information regarding programme
updates will be made known by the
Miele Company as and when such
developments become available.
For testing institutes
All information required regarding
comparison testing and measuring
noise levels is given in the
"Comparison tests" leaflet.
The latest version of this leaflet can be
ordered by emailing:
– testinfo|miele.de
^ Please give your postal address, as
well as the model type and number of
your dishwasher (see data plate).
60
Optional accessories
To make the most of your dishwasher
Optional accessories for particular purposes are available from your Miele dealer,
the Spare Parts Department or online at www.miele-shop.com (some may be
supplied as standard, depending on model).
If you would like to …
you will need to order …
… wash long-stemmed glassware
… a glassware insert for the upper
basket
... wash a Miele Cappuccinatore
… a Cappuccinatore insert for the
upper basket
... small plates, baby bottles and
small items in the upper basket
… a multi-function basket for the
upper basket
... different sized plates, cups and
glasses in the upper basket
… a vario insert for the upper basket
... wash bottles,
e. g. milk or baby bottles
… a bottle holder
… wash additional items of cutlery
… a small cutlery basket for the lower
basket
... wash a lot of glasses
… a glassware insert for the lower
basket
... wash large plates
... an insert for plates up to:
- 33 cm diameter
- 35 cm diameter
61
Electrical connection
Electrical connection U.K.
,All electrical work must be
carried out by a suitably qualified
and competent person, in
accordance with current local and
national safety regulations (BS 7671
in the UK).
Ensure power is not supplied to the
appliance until after installation work
has been carried out.
The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains
supply. Please ensure the connection
data quoted on the data plate match
the household mains supply.
Connection should be made via a
suitable switched socket which is easily
accessible after installation.
For extra safety it is advisable to install
a suitable residual current device
(RCD). Contact a qualified electrician
for advice.
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
62
Non-rewireable plugs BS 1363
The fuse cover must be refitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
WARNING: THIS APPLIANCE
MUST BE EARTHED
Plumbing
The Miele waterproof anti-leak
system
Providing your dishwasher has been
installed correctly, the Miele waterproof
anti-leak system will protect you from
water damage throughout its lifetime.
– The water pressure (flow pressure at
the take-off point) must be between
30 and 1000 kPa (0.3 and 10 bar).
If the water pressure is too high, a
pressure reducer valve must be
fitted.
,To avoid any damage to the
Connection to the water
supply
,Water in the dishwasher must
not be used as drinking water.
appliance, the dishwasher must only
be connected to a fully vented
plumbing system.
– The dishwasher may be connected
to a cold or hot water supply, max.
60 °C. We would only recommend
connection to a hot water supply if it
is economical, e.g. a solar powered
supply. When connected to a hot
water supply all programme stages
which would otherwise be carried out
with cold water will be carried out
with hot water.
– The inlet hose is approx. 1.5 m long.
A 1.5 metre long flexible metal
extension hose, pressure tested to
14,000 kPa/ 140 bar, is available as
an optional accessory if required.
– A stopcock with a 3/4" male thread
must be provided on site.
! The inlet hose must not be
shortened or damaged in any way
as it contains electrical components
(see illustration).
– This appliance is constructed to
comply with IEC/EN/DIN 61770 //
VDE 0700 Section 600, and may be
connected to a suitable supply
without an extra non-return valve if
national regulations permit.
63
Plumbing
Drainage
Venting the drainage system
– The appliance drainage system is
fitted with a non-return valve, which
prevents dirty water from flowing
back into the dishwasher via the
drain hose.
If the on-site drain connection is
situated lower than the guide path for
the bottom basket rollers in the open
door, the drainage system must be
vented. Otherwise a siphoning effect
during a programme can cause the
appliance to empty itself of water.
– The dishwasher is supplied with
approx. 1.5 m of flexible drain hose
with an internal diameter of 22 mm.
– The drain hose can be extended
using a connection piece to attach a
further length of hose.
The drainage length must not be
longer than 4 m, and the delivery
head must not exceed 1 m.
To vent it:
^ Open the dishwasher door fully.
– If the hose is to be directly fitted to
the drainage outlet on site, use the
hose clip supplied (see installation
diagram).
– The hose can be directed to the left
or the right of the appliance.
– The on-site connector for the drain
hose can be adapted to different
widths of hose. If the connector
protrudes too far into the drain hose,
it will need to be shortened.
Otherwise the drain hose may
become blocked.
– The drain hose must not be
shortened.
,Make sure that there are no
kinks in the hose, and that it is not
squashed or stretched.
64
^ Pull the lower spray arm firmly
upwards to remove it.
^ Cut off the top of the vent valve in the
wash cabinet.
Technical data
Dishwasher model
G 1XXX
G 2XXX
Height freestanding
84.5 cm
(adjustable +3.5 cm)
-
Height built-in
80.5 cm
(adjustable + 6.5 cm)
84.5 cm
(adjustable + 6.5 cm)
Height of building-in
recess
Min. 80.5 cm (+ 6.5 cm)
Min. 84.5 cm (+ 6.5 cm)
Width
59.8 cm
59.8 cm
Width of building-in
recess
60 cm
60 cm
Depth:
Freestanding
Built-in
60 cm
57 cm
57 cm
Weight
Max. 66 kg
Max. 58 kg
Voltage
230 V
230 V
Connected load
2200 W
2200 W
Fuse rating
10 A
10 A
Test certificates awarded
KEMA, VDE, radio and
television suppressed
KEMA, VDE, radio and
television suppressed
Water pressure (flow rate) 30 - 1000 kPa
(0.3 - 10 bar)
30 - 1000 kPa
(0.3 - 10 bar)
Hot water connection
Up to max. 60 °C
Up to max. 60 °C
Delivery head
Max. 1 m
Max. 1 m
Drainage length
Max. 4 m
Max. 4 m
Mains cable
Approx. 1.7 m
Approx. 1.7 m
Capacity
12 place settings
14/12 place settings*
* depending on model
65
66
67
Alteration rights reserved/
G1542/G1552/G2542/G2552 / 4407
M.-Nr. 06 992 161 / 00