Alliance Laundry Systems WFF165 Specifications

Washer Extractors
Technical specifications
Installation instructions
Maintenance
Instruction manual
WFF65, WFF75, WFF100
WFF135, WFF165
for corresponding “CWF” and “IWF”
models, see page 5 for complete model
list.
Part No. D0875R9
Code: 249/00353/10
October 2011
Contents
1 Model Numbers ............................................................................................... 5
2 Safety and Environmental Informations ....................................................... 8
Safety ........................................................................................................... 8
Environmental ............................................................................................... 9
Explanation of Safety Messages ................................................................ 10
Important Safety Instructions ...................................................................... 11
Operator Safety .......................................................................................... 13
3 Technical data and dimensions .................................................................. 14
Technical data WFF65, IWF065, IWF014, CWF065, CWF014 .................. 14
Dimensions WFF65, IWF065, IWF014, CWF065, CWF014 ...................... 15
Technical data WFF75, IWF074, IWF018, CWF074, CWF018 .................. 16
Dimensions WFF75, IWF074, IWF018, CWF074, CWF018 ...................... 17
Technical data WFF100, IWF100, IWF025, CWF100, CWF025 ................ 18
Dimensions WFF100, IWF100, IWF025, CWF100, CWF025 .................... 19
Technical data WFF135, IWF135, IWF030, CWF135, CWF030 ................ 20
Dimensions WFF135, IWF135, IWF030, CWF135, CWF030 .................... 21
Technical data WFF165, IWF165, CWF165 ............................................... 22
Dimensions WFF165, IWF165, CWF165 ................................................... 23
4 Installation and Connection Instructions ................................................... 24
Surface ....................................................................................................... 24
Anchoring on a metal base ......................................................................... 24
Directly on the ground ............................................................................... 24
Mounting Bolt Hole Locations for machines, WFF65, IWF065, IWF014,
CWF065, CWF014 ..................................................................................... 25
Mounting Bolt Hole Locations for machines, WFF75, IWF074, IWF018,
CWF074, CWF018 ..................................................................................... 26
Mounting Bolt Hole Locations for machines, WFF100, IWF100, IWF025,
CWF100, CWF025 ..................................................................................... 27
Mounting Bolt Hole Locations for machines, WFF135, IWF135, IWF030,
CWF135, CWF030 ..................................................................................... 28
Mounting Bolt Hole Locations for machines, WFF165, IWF165, CWF165... 29
Water connection ........................................................................................ 30
Water drain ................................................................................................. 30
Electrical Installation ................................................................................... 31
Main power connection ............................................................................... 33
Electrical Specifications WFF65, IWF065, IWF014, CWF065, CWF014 .... 35
Electrical Specifications WFF75, IWF074, IWF018, CWF074, CWF018 .... 36
Electrical Specifications WFF100, IWF100, IWF025, CWF100, CWF025.... 37
Electrical Specifications WFF135, IWF135, IWF030, CWF135, CWF030.... 38
Electrical Specifications WFF165, IWF165, CWF165 ................................ 39
Liquid soap connection (option) .................................................................. 40
Connection of a central operating panel for coin machines (option) .......... 42
3
Contents
5 Steam connection ......................................................................................... 43
6 Technical remarks ........................................................................................ 44
Internal connections of the electrical heating ............................................. 44
7 Maintenance instruction of the machine .................................................... 45
End of day ................................................................................................... 45
General maintenance ................................................................................. 45
Periodical maintenance .............................................................................. 45
Annual maintenance ................................................................................... 46
8 Contact Information ..................................................................................... 47
Nameplate .................................................................................................. 47
9 Repair and after-sales service ..................................................................... 49
4
1
Model Numbers
Build-up
xWF065yyMyyyyyy
xWF075yyMyyyyyy
xWF100yyMyyyyyy
xWF135yyMyyyyyy
xWF165yyMyyyyyy
WFF65
WFF75
WFF100
WFF135
WFF165
xWF014yyMyyyyyy
xWF018yyMyyyyyy
xWF025yyMyyyyyy
xWF030yyMyyyyyy
xWF035yyMyyyyyy
Model numbers
IWF014ANM
IWF018MLM
IWF025SEM
IWF014MNM
IWF018MXM
IWF025SRM
IWF014MCM
IWF018MYM
IWF025SLM
IWF014MDM
IWF018SCM
IWF025SXM
IWF014MEM
IWF018SDM
IWF025SYM
IWF014MLM
IWF018SEM
IWF030ANM
IWF014MXM
IWF018SRM
IWF030MNM
IWF014MYM
IWF018SLM
IWF030MCM
IWF014SCM
IWF018SXM
IWF030MDM
IWF014SDM
IWF018SYM
IWF030MEM
IWF014SEM
IWF025ANM
IWF030MLM
IWF014SRM
IWF025MNM
IWF030MXM
IWF014SLM
IWF025MCM
IWF030MYM
IWF014SXM
IWF025MDM
IWF030SCM
IWF014SYM
IWF025MEM
IWF030SDM
IWF018ANM
IWF025MLM
IWF030SEM
IWF018MNM
IWF025MXM
IWF030SRM
IWF018MCM
IWF025MYM
IWF030SLM
IWF018MDM
IWF025SCM
IWF030SXM
IWF018MEM
IWF025SDM
IWF030SYM
5
1
IWF065ANM
IWF074ZNM
IWF135SCM
IWF065MNM
IWF074ZCM
IWF135SDM
IWF065MCM
IWF074ZDM
IWF135SEM
IWF065MDM
IWF074ZEM
IWF135SRM
IWF065MEM
IWF074ZLM
IWF135SLM
IWF065MLM
IWF074ZXM
IWF135SXM
IWF065MXM
IWF074ZYM
IWF135SYM
IWF065MYM
IWF100ANM
IWF135ZNM
IWF065SCM
IWF100MNM
IWF135ZCM
IWF065SDM
IWF100MCM
IWF135ZDM
IWF065SEM
IWF100MDM
IWF135ZEM
IWF065SRM
IWF100MEM
IWF135ZLM
IWF065SLM
IWF100MLM
IWF135ZXM
IWF065SXM
IWF100MXM
IWF135ZYM
IWF065SYM
IWF100MYM
IWF165ANM
IWF065ZNM
IWF100SCM
IWF165MNM
IWF065ZCM
IWF100SDM
IWF165MCM
IWF065ZDM
IWF100SEM
IWF165MDM
IWF065ZEM
IWF100SRM
IWF165MEM
IWF065ZLM
IWF100SLM
IWF165MLM
IWF065ZXM
IWF100SXM
IWF165MXM
IWF065ZYM
IWF100SYM
IWF165MYM
IWF074ANM
IWF100ZNM
IWF165SCM
IWF074MNM
IWF100ZCM
IWF165SDM
IWF074MCM
IWF100ZDM
IWF165SEM
IWF074MDM
IWF100ZEM
IWF165SRM
IWF074MEM
IWF100ZLM
IWF165SLM
IWF074MLM
IWF100ZXM
IWF165SXM
IWF074MXM
IWF100ZYM
IWF165SYM
IWF074MYM
IWF135ANM
IWF165ZNM
IWF074SCM
IWF135MNM
IWF165ZCM
IWF074SDM
IWF135MCM
IWF165ZDM
IWF074SEM
IWF135MDM
IWF165ZEM
IWF074SRM
IWF135MEM
IWF165ZLM
IWF074SLM
IWF135MLM
IWF165ZXM
IWF074SXM
IWF135MXM
IWF165ZYM
IWF074SYM
IWF135MYM
6
1
CWF014ANM
CWF065MEM
CWF014MNM
CWF065MLM
CWF014MCM
CWF065MXM
CWF014MDM
CWF065MYM
CWF014MEM
CWF074ANM
CWF014MLM
CWF074MNM
CWF014MXM
CWF074MCM
CWF014MYM
CWF074MDM
CWF018ANM
CWF074MEM
CWF018MNM
CWF074MLM
CWF018MCM
CWF074MXM
CWF018MDM
CWF074MYM
CWF018MEM
CWF100ANM
CWF018MLM
CWF100MNM
CWF018MXM
CWF100MCM
CWF018MYM
CWF100MDM
CWF025ANM
CWF100MEM
CWF025MNM
CWF100MLM
CWF025MCM
CWF100MXM
CWF025MDM
CWF100MYM
CWF025MEM
CWF135ANM
CWF025MLM
CWF135MNM
CWF025MXM
CWF135MCM
CWF025MYM
CWF135MDM
CWF030ANM
CWF135MEM
CWF030MNM
CWF135MLM
CWF030MCM
CWF135MXM
CWF030MDM
CWF135MYM
CWF030MEM
CWF165ANM
CWF030MLM
CWF165MNM
CWF030MXM
CWF165MCM
CWF030MYM
CWF165MDM
CWF065ANM
CWF165MEM
CWF065MNM
CWF165MLM
CWF065MCM
CWF165MXM
CWF065MDM
CWF165MYM
7
2
Safety and Environmental Informations
Safety
CAUTION LABELS
Please familiarize yourself with the following standard warning symbols. They are
used throughout this manual and on the equipment to alert you to possible hazards.
Anyone operating or servicing this equipment must understand these symbols and
must follow all safety rules in this manual.
ELECTRICAL HAZARD
This symbol alerts you to the presence of a dangerous voltage, which could cause a
serious shock resulting in personal injury or death.
CONSULT MANUAL
This symbol warns you to consult the manual for important instructions concerning
the machine and possible hazards.
MOVING PARTS HAZARD
This symbol alerts you to the presence of possible dangerous moving parts within
the machine. Guards should always be in place when the machine is in operation. Be
very careful when servicing the drive system.
PINCHING HAZARD
This warning symbol indicates the presence of a pinch point on the machine. This is
a place where your hand might be pinched or crushed, resulting in a severe injury.
Make sure you understand these hazards and keep all body parts clear of them.
HOT SURFACE HAZARD
This symbol indicates the presence of a potentially hot surface. Some machine
surfaces and parts may become extremely hot during normal operation and should
not be touched.
ATTENTION
This symbol identifies information about practices or circumstances that can lead to
personal injury or death, property damage, or economic loss.
8
2
Environmental
Disposal of Unit
This appliance is marked according to the European directive 2002/96/
EC on Waste Electrical and Electronic Equipment (WEEE).
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Ensuring this product is disposed
of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. The recycling
of materials will help to conserve natural resources. For more detailed
information about recycling of this product, please contact your local
distributor resources.
9
2
Explanation of Safety Messages
Throughout this manual and on machine decals, you will find precautionary statements (“DANGER,”
“WARNING,” and “CAUTION”) followed by specific instructions. These precautions are intended for the
personal safety of the operator, user, servicer, and those maintaining the machine.
DANGER
Indicates an imminently hazardous situation that, if not
avoided, will cause severe personal injury or death.
WARNING
Indicates a hazardous situation that, if not avoided, could
cause severe personal injury or death.
CAUTION
Indicates a hazardous situation that, if not avoided, may
cause minor or moderate personal injury or property
damage.
Safety Decals
Safety decals appear at crucial locations on the machine. Failure to maintain legible safety decals could
result in injury to the operator or service technician.
To provide personal safety and keep the machine in proper working order, follow all maintenance and
safety procedures presented in this manual. If questions regarding safety arise, contact the manufacturer
immediately.
Use manufacturer-authorized spare parts to avoid safety hazards.
Additional precautionary statements (“IMPORTANT” and “NOTE”) are followed by specific instructions.
IMPORTANT: The word “IMPORTANT” is used to inform the reader of specific procedures where
minor machine damage will occur if the procedure is not followed.
NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing
information that is important but not hazard related.
10
2
Important Safety Instructions
WARNING
To reduce the risk of fire, electric shock, serious injury or
death to persons when using your washer, follow these
basic precautions:
1. Read all instructions before using the washer.
2. Refer to the GROUNDING INSTRUCTIONS in the installation Manual for the proper grounding of the
washer.
3. Do not wash textiles that have been previously cleaned, washed, soaked, or spotted with gasoline,
dry-cleaning solvents, or other flammable or explosive substances as they give off vapors that could
ignite or explode.
4. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash
water. These substances give off vapors that could ignite or explode.
5. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been
used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been
used for such a period, before using a washing machine or combination washer-dryer, turn on all hot
water faucets and let the water flow from each for several minutes. This will release any accumulated
hydrogen gas. The gas is flammable, do not smoke or use an open flame during this time.
6. Do not allow children to play on or in the washer. This appliance is not intended for use by young
children or infirm persons without supervision. Young children should be supervised to ensure that
they do not play with the appliance.
7. Before the washer is removed from service or discarded, remove the door to the washing
compartment.
8. Do not reach into the washer if the wash drum is moving. This is an imminently hazardous situation
that, if not avoided, will cause severe personal injury or death.
9. Do not install or store the washer where it will be exposed to water and/or weather.
10. Do not tamper with the controls.
11. Do not repair or replace any part of the washer, or attempt any servicing unless specifically
recommended in the user-maintenance instructions or in published user-repair instructions that the
user understands and has the skills to carry out.
12. To reduce the risk of an electric shock or fire, DO NOT use an extension cord or an adapter to connect
the washer to an electrical power source.
13. Use a washer only for its intended purpose, washing textiles.
14. ALWAYS disconnect the washer from the electrical supply before attempting any service. Disconnect
the power cord by grasping the plug, not the cord.
15. Install the washer according to the INSTALLATION INSTRUCTIONS. All connections for water, drain,
electrical power and grounding must comply with local codes and be made by licensed personnel
when required.
16. To reduce the risk of fire, textiles which have traces of any flammable substances such as vegetable
oil, cooking oil, machine oil, flammable chemicals, thinner, etc., or anything containing wax or
chemicals such as in mops and cleaning cloths, must not be put into the washer. These flammable
substances may cause the fabric to catch on fire.
17. Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of
the fabric softener or product.
18. Keep washer in good condition. Bumping or dropping the washer can damage safety features. If this
occurs, have washer checked by a qualified service person.
19. Replace worn power cords and/or loose plugs.
20. Be sure water connections have a shut-off valve and that fill hose connections are tight. CLOSE the
shut-off valves at the end of each wash day.
11
2
21. Loading door MUST BE CLOSED any time the washer is to fill, tumble, or spin. DO NOT bypass the
loading door switch by permitting the washer to operate with the loading door open.
22. Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed
all warnings or precautions. To reduce the risk of poisoning or chemical burns, keep them out of the
reach of children at all times (preferably in a locked cabinet).
23. Always follow the fabric care instructions supplied by the textile manufacturer.
24. Never operate the washer with any guards and/or panels removed.
25. DO NOT operate the washer with missing or broken parts.
26. DO NOT bypass any safety devices.
27. Failure to install, maintain, and/or operate this washer according to the manufacturer’s instructions
may result in conditions which can produce bodily injury and/or property damage.
28. It is recommended that the machine be installed by qualified technicians.
29. Before starting repairs or maintenance, shut off all power and water supplies.
30. To prevent fire and explosion:
Keep the area around the machine free from inflammable or combustible products.
NOTE: The WARNINGS and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not
meant to cover all possible conditions and situations that may occur. Common sense, caution, and
care must be exercised when installing, maintaining, or operating the washer.
Any problems or conditions not understood should be reported to the dealer, distributor, service agent, or
the manufacturer.
SAVE THESE INSTRUCTIONS
12
2
Operator Safety
WARNING
NEVER insert hands or objects into basket until it has
completely stopped. Doing so could result in serious
injury.
To ensure the safety of machine operators, the following maintenance checks must be performed daily:
1. Prior to operating the machine, verify that all warning signs are present and legible. Missing or illegible
signs must be replaced immediately. Make certain that spares are available.
2. Check door interlock before starting operation of the machine:
a. Attempt to start the machine with the door open. The machine should not start with the door open.
b. Close the door without locking it and attempt to start the machine. The machine should not start with
the door unlocked.
c. Close and lock the door and start a cycle. Attempt to open the door while the cycle is in progress.
The door should not open.
If the door lock and interlock are not functioning properly, call a service technician.
3. Do not attempt to operate the machine if any of the following conditions are present:
a. The door does not remain securely locked during the entire cycle.
b. Excessively high water level is evident.
c. Machine is not connected to a properly grounded circuit.
Do not bypass any safety devices in the machine.
WARNING
Never operate the machine with a bypassed or
disconnected balance system. Operating the machine
with severe out-of-balance loads could result in personal
injury and serious equipment damage.
SAVE THESE INSTRUCTIONS
13
3
Technical data and dimensions
Technical data WFF65, IWF065, IWF014, CWF065, CWF014
METRIC
US
1:11
5,9 kg
13 lb.
1:10
6,5 kg
14.33 lb.
1:9
7,2 kg
15.87 lb.
Diameter
530 mm
20.86 inch
Depth
Capacity (dry weight) Ratio [kg/Lit]
Cylinder
295 mm
11.61 inch
Volume
65 Lit
2.29 ft³
Height
1041 mm
40.98 inch
Width
660 mm
25.98 inch
Depth
797 mm
31.37 inch
Diameter door opening
300 mm
11.81 inch
Door height
355 mm
13.97 inch
To center
508 mm
20 inch
Cabinet
Front loading
Speed
Wash
10 - 50 tr/min - RPM
Distribution
85 tr/min - RPM
Spin
700 tr/min - RPM
Spin
145
G-factor
Motor (3-phase)
4p. 1470 tr./min
0,55kW / 0,73HP
Drain valve
2"
Water supply
Hard, soft, warm water
3/4"
Steam connection
3/8"
Steam connection
Heating
Electrical 230/400 V
4,2 kW - 6 kW - 9 kW
Electrical 400V
N/A
Steam
X
Warm water (without additional heating)
X
Warm water (with additional heating)
X
Packing dimensions
(H x W x D) mm - inch
1160x730x850 mm - 45.66x28.74x33.46 inch
Weight
Net
174 kg
384 lb.
Gross
192 kg
423.28 lb.
14
3
Dimensions WFF65, IWF065, IWF014, CWF065, CWF014
Legend: metric mm [inches]
355 [13.98]
1041 [40.98]
1014 [39.92]
220 [8.66]
5 [0.2]
55 [2.17]
550 [21.65]
55 [2.17]
37 [1.46]
273 [10.75]
69 [2.72]
660 [25.98]
287 [11.3]
48 [1.89]
670 [26.37]
728 [28.66]
226 [8.9]
151 [5.94]
75 [2.95]
A
D
F
B
C
E
G
I
696.5 [27.42]
747 [29.41]
L
277.5 [10.92]
K
180 [7.09]
164.5 [6.48]
660 [25.98]
A. Ventilation soap dispenser
B. Liquid soap connections
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G.Electrical connections
I. Ventilation tub
K. Drain valve
L. Steam connections
60 [2.36]
887 [34.92]
791 [31.14]
109 [4.29]










15
3
Technical data WFF75, IWF074, IWF018, CWF074, CWF018
METRIC
US
1:11
6,9 kg
14.33 lb.
1:10
7,3 kg
16.09 lb.
1:9
8,4 kg
18.51 lb
Diameter
530 mm
20.86 inch
Depth
345 mm
13.58 inch
Volume
73 Lit
2.57 ft³
Height
1041 mm
40.98 inch
Width
660 mm
25.98 inch
Depth
797 mm
31.37 inch
Diameter door opening
300 mm
11.81 inch
Door height
355 mm
13.97 inch
To center
508 mm
20 inch
Capacity (dry weight) Ratio [kg/Lit]
Cylinder
Cabinet
Front loading
Speed
Wash
10 - 50 tr/min - RPM
Distribution
85 tr/min - RPM
Spin
700 tr/min - RPM
Spin
145
G-factor
Motor (3-phase)
4p. 1470 tr./min
0,55kW / 0,73HP
Drain valve
2"
Water supply
Hard, soft, warm water
3/4"
Steam connection
3/8"
Steam connection
Heating
Electrical 230/400 V
4,2 kW - 6 kW - 9 kW
Electrical 400V
12 kW
Steam
X
Warm water (without additional heating)
X
Warm water (with additional heating)
X
Packing dimensions
(H x W x D) mm - inch
1160x730x850 mm - 45.66x28.74x33.46 inch
Weight
Net
181 kg
399.03 lb.
Gross
196 kg
432.10 Ib.
16
3
Dimensions WFF75, IWF074, IWF018, CWF074, CWF018
220 [8.66]
355 [13.98]
1014 [39.92]
1041 [40.98]
Legend: metric mm [inches]
5 [0.2]
55 [2.17]
550 [21.65]
55 [2.17]
37 [1.46]
233 [9.17]
69 [2.72]
660 [25.98]
327 [12.87]
48 [1.89]
670 [26.37]
728 [28.66]
226 [8.9]
151 [5.94]
75 [2.95]
A
D
F
B
C
E
G
I
696.5 [27.42]
747 [29.41]
L
277.5 [10.92]
A. Ventilation soap dispenser
B. Liquid soap connections
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G.Electrical connections
I. Ventilation tub
K. Drain valve
L. Steam connections
K
180 [7.09]
164.5 [6.48]
660 [25.98]
60 [2.36]
887 [34.92]
791 [31.14]
109 [4.29]










17
3
Technical data WFF100, IWF100, IWF025, CWF100, CWF025
METRIC
US
1:11
8,6 kg
18.95 lb.
1:10
9,5 kg
20.94 lb.
1:9
10,5 kg
23.14 lb.
Diameter
530 mm
20.86 inch
Depth
Capacity (dry weight) Ratio [kg/Lit]
Cylinder
440 mm
17.32 inch
Volume
95 Lit
3.35 ft³
Height
1041 mm
40.98 inch
Width
660 mm
25.98 inch
Depth
897 mm
35.31 inch
Diameter door opening
300 mm
11.81 inch
Door height
355 mm
13.97 inch
To center
508 mm
20 inch
Cabinet
Front loading
Speed
Wash
10 - 50 tr/min - RPM
Distribution
85 tr/min - RPM
Spin
700 tr/min - RPM
Spin
145
G-factor
Motor (3-phase)
4p. 1470 tr./min
0,55kW / 0,73HP
Drain valve
2"
Water supply
Hard, soft, warm water
3/4"
Steam connection
3/8"
Steam connection
Heating
Electrical 230/400 V
4,2 kW - 6 kW - 9 kW
Electrical 400V
12 kW
Steam
X
Warm water (without additional heating)
X
Warm water (with additional heating)
X
Packing dimensions
(H x W x D) mm - inch
1170x730x950 mm - 45.66x28.74x37.40 inch
Weight
Net
200 kg
440.92 lb.
Gross
209 kg
460.76 lb.
18
3
Dimensions WFF100, IWF100, IWF025, CWF100, CWF025
220 [8.66]
355 [13.98]
1014 [39.92]
1041 [40.98]
Legend: metric mm [inches]
5 [0.2]
55 [2.17]
550 [21.65]
55 [2.17]
660 [25.98]
37 [1.46]
233 [9.17]
69 [2.72]
427 [16.81]
48 [1.89]
770 [30.31]
828 [32.6]
226 [8.9]
151 [5.94]
75 [2.95]
A
D
F
B
C
E
G
I
696.5 [27.42]
747 [29.41]
L
277.5 [10.92]
A. Ventilation soap dispenser
B. Liquid soap connections
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G.Electrical connections
I. Ventilation tub
K. Drain valve
L. Steam connections
K
180 [7.09]
164.5 [6.48]
660 [25.98]
60 [2.36]
887 [34.92]
791 [31.14]
109 [4.29]










19
3
Technical data WFF135, IWF135, IWF030, CWF135, CWF030
METRIC
US
1:11
12 kg
26.45 lb.
1:10
13,2 kg
29.10 lb.
1:9
14,5 kg
31.96 lb.
Diameter
650 mm
25.59 inch
Depth
Capacity (dry weight) Ratio [kg/Lit]
Cylinder
400 mm
17.74 inch
Volume
132 Lit
4.66 ft³
Height
1204 mm
47.40 inch
Width
780 mm
30.70 inch
Depth
842 mm
33.14 inch
Diameter door opening
300 mm
11.81 inch
Door height
455 mm
17.91 inch
To center
606 mm
23.85 inch
Cabinet
Front loading
Speed
Wash
10 - 50 tr/min - RPM
Distribution
85 tr/min - RPM
Spin
632 tr/min - RPM
Spin
145
G-factor
Motor (3-phase)
4p. 1470 tr./min
1,10kW / 1,47HP
Drain valve
2"
Water supply
Hard, soft, warm water
3/4"
Steam connection
3/8"
Steam connection
Heating
Electrical 230/400 V
12 kW - 15 kW - 18 kW
Electrical 400V
N/A
Steam
X
Warm water (without additional heating)
X
Warm water (with additional heating)
X
Packing dimensions
(H x W x D) mm - inch
1340x 848x 950 mm- 52.75x33.38x37.40 inch
Weight
Net
280 kg
617.29 lb.
Gross
293 kg
645.95 lb.
20
3
Dimensions WFF135, IWF135, IWF030, CWF135, CWF030
Legend: metric mm [inches]
220 [8.66]
455 [17.91]
1175 [46.26]
1204 [47.4]
84 [3.31]
70 [2.76]
640 [25.2]
70 [2.76]
28 [1.1]
260 [10.24]
410 [16.14]
33 [1.3]
760 [29.92]
780 [30.71]
82 [3.23]
816 [32.12]
332 [13.07]
267 [10.51]
202 [7.95]
106.5 [4.19]
A
F
D
B
C
E
G
I
843 [33.19]
894 [35.2]
A. Ventilation soap dispenser
B. Liquid soap connections
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G.Electrical connections
I. Ventilation tub
K. Drain valve
L. Steam connections
L
302 [11.89]
K
315 [12.4]
209 [8.23]
84 [3.31]
969 [38.15]
936 [36.85]
109 [4.29]










21
3
Technical data WFF165, IWF165, CWF165
METRIC
US
1:11
15 kg
33.06 lb.
1:10
16,5 kg
36.37 lb.
1:9
18,3 kg
40.34 lb.
Diameter
650 mm
25.59 inch
Depth
Capacity (dry weight) Ratio [kg/Lit]
Cylinder
500 mm
19.68 inch
Volume
165 Lit
5.83 ft³
Height
1204 mm
47.40 inch
Width
780 mm
30.70 inch
Depth
942 mm
37.08 inch
Diameter door opening
300 mm
11.81 inch
Door height
455 mm
17.91 inch
To center
606 mm
23.85 inch
Cabinet
Front loading
Speed
Wash
10 - 50 tr/min - RPM
Distribution
85 tr/min - RPM
Spin
632 tr/min - RPM
Spin
145
G-factor
Motor (3-phase)
4p. 1470 tr./min
1,10kW / 1,47HP
Drain valve
2"
Water supply
Hard, soft, warm water
3/4"
Steam connection
3/8"
Steam connection
Heating
Electrical 230/400 V
12 kW - 15kW - 18 kW
Electrical 400V
21 kW - 24 kW
Steam
X
Warm water (without additional heating)
X
Warm water (with additional heating)
X
Packing dimensions
(H x W x D) mm
1340x848x1020 mm- 52.75x33.38x40.15 inch
Weight
Net
298 kg
656.97 lb.
Gross
310 kg
683.43 lb.
22
3
Dimensions WFF165, IWF165, CWF165
Legend: metric mm [inches]
220 [8.66]
455 [17.91]
1175 [46.26]
1204 [47.4]
84 [3.31]
70 [2.76]
640 [25.2]
70 [2.76]
28 [1.1]
260 [10.24]
510 [20.08]
33 [1.3]
860.1 [33.86]
780 [30.71]
82 [3.23]
916.1 [36.07]
332 [13.07]
267 [10.51]
202 [7.95]
106.5 [4.19]
A
F
D
B
C
E
G
I
843 [33.19]
894 [35.2]
A. Ventilation soap dispenser
B. Liquid soap connections
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G.Electrical connections
I. Ventilation tub
K. Drain valve
L. Steam connections
L
302 [11.89]
K
315 [12.4]
209 [8.23]
84 [3.31]
969 [38.15]
936 [36.85]
109 [4.29]










23
4
Installation and Connection Instructions
CAUTION
Ensure that the machine is installed on a level floor of
sufficient strength and that the recommended clearances
for inspection and maintenance are provided. Never
allow the inspection and maintenance space to be
blocked.
Surface
The machine must be securely fixed on a flat surface (metal base,
concrete or solid ground). The anchoring is to be done on the
6 provided places (A) (See Label 1) in the holes on the corner of the
base. (See Mounting Bolt Hole Locations)
A
The machine must be placed entirely level. For easy maintenance it
is recommended to keep a minimal distance of 600 mm - 23.62 inch
between the wall and the back of the machine.
A
Label 1
If several machines are placed next to each another, there should be a
minimal distance of 30 mm - 1.18 inch between each machine.
Anchoring on a metal base
D
E
C
F
D
C
B
The machines must be fixed on a metal base which is securely
anchored on a concrete base. See Label 2.
WFF65/75/100 = WFF65, IWF065, IWF014, CWF065, CWF014, WFF75,
IWF074, IWF018, CWF074, CWF018, WFF100, IWF100,
IWF025, CWF100, CWF025
WFF135/165 = WFF135, IWF135, IWF030, CWF135, CWF030, WFF165,
IWF165, CWF165
G
A: Bolt M12 (1/2”) (WFF65/75/100), M16 (5/8”) (WFF135/165)
B: Concrete base: WFF65/75/100: 15 cm - 6 inch, WFF135/165: 20 cm 8 inch
C: Washer 40x17x4 (1.57x0.60x0.15)
D: Nut M12 (1/2”) (WFF65/75/100), M16 (5/8”) (WFF135/165)
E: Base of the machine
F: Metal base
G: Bolt M16x60 (5/8” x 2 1/2”)
A
Label 2
Directly on the ground
D
E
C
B
A
The machine must be anchored directly on a concrete base. See
Label 3.
A: Bolt M12 (1/2”) (WFF65/75/100), M16 (5/8”) (WFF135/165)
B: Concrete base: WFF65/75/100: 15 cm - 6 inch, WFF135/165: 20 cm 8 inch
C: Washer 40x17x4 (1.57x0.60x0.15)
D: Nut M12 (1/2”) (WFF65/75/100), M16 (5/8”) (WFF135/165)
E: Base of the machine
IMPORTANT: Machine bolts should be re-checked on a quarterly basis.
Label 3
24
4
Mounting Bolt Hole Locations for machines, WFF65, IWF065, IWF014, CWF065,
CWF014
37 [1.46]
Legend: metric mm [inches]
Ø
22
645 [25.4]
48 [1.89]
287 [11.3]
560 [22.05]
]
273 [10.75]
87
0.
[Ø
55 [2.17]
550 [21.65]
55 [2.17]
660 [25.98]
25
4
Mounting Bolt Hole Locations for machines, WFF75, IWF074, IWF018, CWF074,
CWF018
37 [1.46]
Legend: metric mm [inches]
Ø
645.1 [25.4]
48 [1.89]
327 [12.87]
560 [22.05]
]
87
0.
[Ø
233 [9.17]
22
55 [2.17]
550 [21.65]
55 [2.17]
660 [25.98]
26
4
Mounting Bolt Hole Locations for machines, WFF100, IWF100, IWF025, CWF100,
CWF025
37 [1.46]
Legend: metric mm [inches]
Ø
745 [29.33]
48 [1.89]
427 [16.81]
660 [25.99]
]
87
0.
[Ø
233 [9.17]
22
55 [2.17]
550 [21.65]
55 [2.17]
660 [25.98]
27
4
Mounting Bolt Hole Locations for machines, WFF135, IWF135, IWF030, CWF135,
CWF030
28 [1.1]
Legend: metric mm [inches]
Ø
33 [1.3]
410 [16.14]
640 [25.2]
70 [2.76]
780 [30.71]
28
731 [28.78]
670 [26.38]
]
87
0.
[Ø
260 [10.24]
22
70 [2.76]
4
Mounting Bolt Hole Locations for machines, WFF165, IWF165, CWF165
28 [1.1]
Legend: metric mm [inches]
Ø
33 [1.3]
510 [20.08]
831 [32.72]
770 [30.31]
]
87
0.
[Ø
260 [10.24]
22
70 [2.76]
640 [25.2]
70 [2.76]
780 [30.71]
29
4
Water connection
The machine is delivered with hoses with 3/4" connections. These hoses fit the water
inlet valves of the machine and the main water inlet taps. All the inlet valves have to be
connected. To ensure the optimal functioning of the water inlet valves, the water pressure
on the inlet should be between 3 and 5 bar (40 and 80 psi). If the pressure is too low, the
cycle time will increase considerably.
International inlet flow capacity per minute (gallons / liters): 4.23 / 16.
US inlet flow capacity per minute (gallons / liters): 5.28 / 20.
In case of boiler fed machines, a minimum of hot water of 90°C - 194°F should be
available per unit. (See Table 1)
Min Contents
Boiler
MODEL
METRIC
US
For the WFF65 = WFF65, IWF065, IWF014, CWF065, CWF014
55 l.
1.94 ft³
For the WFF75 = WFF75, IWF074, IWF018, CWF074, CWF018
65 l.
2.29 ft³
For the WFF100 = WFF100, IWF100, IWF025, CWF100, CWF025
80 l.
2.82 ft³
For the WFF135 = WFF135, IWF135, IWF030, CWF135, CWF030
100 l.
3.53 ft³
For the WFF165 = WFF165, IWF165, CWF165
120 l.
4.23 ft³
Table 1
To comply with the WRAS water regulations: an 'approved' single check valve or
some other no less effective backflow prevention device shall be fitted at the point of
connection(s) between the supply and the fitting (IRN R150).
Water drain
The machine is equipped with a drain valve with 2" outer diameter (50 mm). This drain
valve should be connected to the drain by means of the drain elbow which is delivered
with the machine.
 The diameter of the main drain should be adapted to the water flow and the number
of machines. It should be sufficient to handle at least 80 l/min - 21.13 gal./min per
machine.
 It is necessary to connect the main drain at least on one side to an open air-brake to
allow ventilation.
30
4
Electrical Installation
Important
Electrical ratings are subject to changes. Refer to serial plate decal for electrical ratings information
specific to your machine.
WARNING
Hazardous Voltage. Can cause shock, burn or cause
death. Allow machine power to remain off for two minutes
prior to working in and around AC inverter drive.
WARNING
Hazardous Voltage. Can cause shock, burn or death.
Verify that a ground wire from a proven earth ground is
connected to the lug near the input power block on this
machine.
The AC inverter drive requires a clean power supply free from voltage spikes and surges. If a
transformer or generator is connected to the building's power supply, always install line reactors
before the terminal block connections to the machine. A voltage monitor should be used to check
incoming power. The customer’s local power company may provide such a monitor.
If input voltage measures above 240V for a 220V drive or above 480V for a 400V drive, ask the
power company to lower the voltage. As an alternative, a step-down transformer kit is available
from the distributor.
The AC drive provides overload protection for the drive motor. However, a separate single or
three-phase circuit breaker must be installed for complete electrical overload protection. This
prevents damage to the motor by disconnecting all legs if one should be lost accidentally. Check
the data plate on the back of the washer-extractor or consult Table 2 through 6 for circuit breaker
requirements.
IMPORTANT: Do NOT use fuses in place of a circuit breaker.
For installation in the United States or Canada, branch circuit protection must be provided
according to National and Local Codes. The branch circuit breaker must be of the inverse time or
instantaneous trip type at the values given in the technical specifications for each machine.
Use a circuit breaker of the minimal type of 10kA interrupt current.
CAUTION
Do not use a voltage or phase converter on any variable speed machine.
The washer-extractor should be connected to an individual branch circuit not shared with lighting or
another electrical device.
- In accordance with legal regulations, every machine must be protected with an earth leakage
circuit breaker of 30mA.
- The earth leakage circuit breaker, which one uses, must be of the type SI.
- For countries outside the European Community, the usual safety instructions must be observed.
31
4
The connection should be shielded in a liquid tight or approved flexible conduit with proper
conductors of correct size installed in accordance with the National Electric Code or other
applicable codes. The connection must be made by a qualified electrician using the wiring diagram
provided with the washer-extractor, or according to accepted European standards for CE-approved
equipment.
Use wire sizes indicated in Table 2 through 6 for runs up to 50 feet.
Use next larger size for runs of 50 to 100 feet. Use two sizes larger for runs greater than 100 feet.
For personal safety and proper operation, the washer-extractor must be grounded in accordance
with state and local standards. If such standards are not available, grounding must conform to the
National Electric Code, article 250-95. The ground connection must be made to a proven earth
ground, not to a water pipe, gas pipe, or another metal pipe. Provide the necessary equipotential
connections according to the local electrical prescriptions.
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded metal, permanent wiring system; or an equipmentgrounding conductor must be run with the circuit conductors and connected to the equipmentgrounding terminal or lead on the appliance.
IMPORTANT: Alliance Laundry Systems Warranty does not cover components that fail as a
result of improper input voltage.
32
4
Main power connection
Label 4
Connection label:
Machine power connections are made at the back of the machine. Three or four conductor power cable
is the recommended method (See chapter electrical specs for minimum cable requirements, if local
electrical codes exceed these requirements, follow local codes). The number of conductors in this cable
and the proper connection points for the cable wires shall be determined by the machine and power
requirements. All machines must have a ground wire and be properly grounded. The ground wire must
be insulated with a green/yellow color. This wire is normally within the power cable but can also be a
separate wire run along side the power cable if properly sized.
Never run a machine that does not have a ground wire. This ground wire must be connected to
the machine grounding lug found near the main switch. This lug is identified with the international
“protective earth” symbol and the letters “PE”. Failure to connect this ground wire can lead to an unsafe
machine condition leading to machine damage and/or operator injury or death. This wire must be
connected to earth ground at far end.
Machine Power Cable Connections:
Remove main switch cover plate at back of machine (see chapter dimensions part (F)). Run power cable
through the cabinet knock-out located directly below the cover plate. Before installing, obtain and install
a cord-grip to hold the cable in place. Never rely upon the electrical connections to hold cable in place.
Allow some slack in this cable outside of the machine to form a drip-loop between the supply power circuit
breaker and the machine knock-out. Connect power cable wires as directed below. Always connect the
ground wire first and remove last.
Wiring based on the supply power and machine design (voltage/frequency):
440-480 Volts, 3-Phase, 3-wire or 4-wire + PE, 50 or 60 Hertz Configuration (Named: N-Voltage):
With supply power of: 440-480 Volts, 3-phase, 3-wire, after connecting the green/yellow PE ground wire,
connect one wire to each of the bottom terminals of the power contactor switch marked: “L1,L2,L3”. When
this supply power has four wires, connect this 4th wire, identified as a neutral wire, to the bottom terminal
of the auxiliary contactor on the power contactor switch marked: “N”. Connect the remaining power wires
as first noted.
380-415 Volts, 3-Phase, 4-wire + PE, 50 or 60 Hertz Configuration (Named: P-Voltage):
With supply power of: 380-415 Volts, 3-phase, 4-wire, after connecting the green/yellow PE ground wire,
follow the directions of the four wire system for 440-480 Volt configuration.
33
4
200-240 Volts, 3-Phase, 3-wire + PE, 50 or 60 Hertz Configuration (Named: Q-Voltage or 3-phase X-Voltage):
With supply power of: 200-240 Volts, 3-phase, 3-wire, after connecting the green/yellow PE ground wire, connect one power
wire to each of the terminals at the bottom of the power contactor switch marked: “L1,L2,L3”.
200-240 volts, 1-Phase, 2-wire + PE, 50 Hertz (called 1-phase, 50 Hz X-voltage):
With supply power of: 200-240 Volts, 1-phase, 2-wire, 50Hz, after connecting the green/yellow PE ground wire, connect
the power wire to the “L1” bottom terminal of the power contactor switch and the other wire, identified as the neutral wire,
to the bottom terminal of the auxiliary contactor on the power contactor switch marked: “N”.
200-240 volts, 1-Phase, 2-wire + PE, 60 Hertz (called 1-phase, 60 Hz X-voltage):
With supply power of: 200-240 Volts, 1-phase, 2-wire, 60Hz, after connecting the green/yellow PE ground wire, connect
one power wire to the “L1” and power wire to the “L2” of the bottom terminals of the power contactor switch.
 After connection, check the spin direction. The cylinder must spin in the clockwise direction.
A wrong spin direction can damage the motor and can also cause water to spurt from the soap dispenser.
 In case of wrong spin direction: switch the terminal clamps of the motor circuit “R” and “S” of the connecting cable or
change the connection at the terminal block switching the L1 and L2 wires.
34
4
WARNING
The washer-extractor should be connected to an individual branch
circuit not shared with lighting or other equipment.
Electrical Specifications WFF65, IWF065, IWF014, CWF065, CWF014
65 liters / 14 pounds
Boiler Fed/Steam Heat
1,0
10
6
14/2.5
P
380-415
50/60
3
3+N+PE
1,0
10
6
14/2.5
Q
200-240
50/60
3
3+PE
2,5
10
6
14/2.5
X
200-240
50/60
1/3
2/3+PE
2,5
10
6
14/2.5
3x2 kW
AWG/mm2
Full Load Amps
3+PE
Recommended
Circuit Breaker (USmarket)
Wire
3
Full Load Amps
Phase
50/60
kW Standard
Heating Elements
Cycle
NON-US
440-480
AWG/mm2
Voltage
Recommended Circuit
Breaker (US-market)
Code
US
N
Electric Heat
US
NON-US
N/A
N/A
N/A
N/A
13,4
15
16
14/2.5
18,9
25
20
14/2.5
N/A
N/A
N/A
N/A
Alternative Electric Heat Options
N
440-480
50/60
3
3+PE
N/A
N/A
N/A
N/A
P
380-415
50/60
3
3+N+PE
8,6
10
10
14/2.5
Q
200-240
50/60
3
3+PE
14,0
15
16
14/2.5
3x1.4 kW
X
200-240
50/60
1/3
2/3+PE
N/A
N/A
N/A
N/A
N
440-480
50/60
3
3+PE
N/A
N/A
N/A
N/A
17,3
25
20
14/2.5
27,1
30
25
14/2.5
N/A
N/A
N/A
N/A
P
380-415
50/60
3
3+N+PE
Q
200-240
50/60
3
3+PE
X
200-240
50/60
1/3
2/3+PE
3x3 kW
Table 2
35
4
WARNING
The washer-extractor should be connected to an individual branch
circuit not shared with lighting or other equipment.
Electrical Specifications WFF75, IWF074, IWF018, CWF074, CWF018
75 liters / 18 pounds
Boiler Fed/Steam Heat
1,0
10
6
14/2.5
P
380-415
50/60
3
3+N+PE
1,0
10
6
14/2.5
Q
200-240
50/60
3
3+PE
2,5
10
6
14/2.5
X
200-240
50/60
1/3
2/3+PE
2,5
10
6
14/2.5
3x2 kW
AWG/mm2
Full Load Amps
3+PE
Recommended
Circuit Breaker (USmarket)
Wire
3
Full Load Amps
Phase
50/60
kW Standard
Heating Elements
Cycle
NON-US
440-480
AWG/mm2
Voltage
Recommended Circuit
Breaker (US-market)
Code
US
N
Electric Heat
US
NON-US
N/A
N/A
N/A
N/A
13,4
15
16
14/2.5
18,9
25
20
14/2.5
N/A
N/A
N/A
N/A
Alternative Electric Heat Options
N
440-480
50/60
3
3+PE
N/A
N/A
N/A
N/A
P
380-415
50/60
3
3+N+PE
8,6
10
10
14/2.5
Q
200-240
50/60
3
3+PE
14,0
15
16
14/2.5
X
200-240
50/60
1/3
2/3+PE
N/A
N/A
N/A
N/A
N
440-480
50/60
3
3+PE
N/A
N/A
N/A
N/A
17,3
25
20
14/2.5
27,1
30
25
14/2.5
3x1.4 kW
P
380-415
50/60
3
3+N+PE
Q
200-240
50/60
3
3+PE
X
200-240
50/60
1/3
2/3+PE
N/A
N/A
N/A
N/A
N
440-480
50/60
3
3+PE
19,8
25
20
14/2.5
P
380-415
50/60
3
3+N+PE
22,8
30
25
14/2.5
Q
200-240
50/60
3
3+PE
N/A
N/A
N/A
N/A
X
200-240
50/60
1/3
2/3+PE
N/A
N/A
N/A
N/A
3x3 kW
3x4 kW
Table 3
36
4
WARNING
The washer-extractor should be connected to an individual branch
circuit not shared with lighting or other equipment.
Electrical Specifications WFF100, IWF100, IWF025, CWF100, CWF025
100 liters / 25 pounds
Boiler Fed/Steam Heat
AWG/mm2
Recommended
Circuit Breaker (USmarket)
Full Load Amps
kW Standard
Heating Elements
NON-US
AWG/mm2
Recommended Circuit
Breaker (US-market)
Full Load Amps
Wire
Phase
Cycle
Voltage
Code
US
Electric Heat
US
NON-US
N
440-480
50/60
3
3+PE
1,0
10
6
14/2.5
N/A
N/A
N/A
N/A
P
380-415
50/60
3
3+N+PE
1,0
10
6
14/2.5
17,3
25
20
14/2.5
Q
200-240
50/60
3
3+PE
2,5
10
6
14/2.5
X
200-240
50/60
1/3
2/3+PE
2,5
10
6
14/2.5
3x3 kW
27,1
30
25
14/2.5
N/A
N/A
N/A
N/A
Alternative Electric Heat Options
N
440-480
50/60
3
3+PE
N/A
N/A
N/A
N/A
P
380-415
50/60
3
3+N+PE
8,6
10
10
14/2.5
Q
200-240
50/60
3
3+PE
14,0
15
16
14/2.5
3x1.4 kW
X
200-240
50/60
1/3
2/3+PE
N/A
N/A
N/A
N/A
N
440-480
50/60
3
3+PE
N/A
N/A
N/A
N/A
P
380-415
50/60
3
3+N+PE
13,4
15
16
14/2.5
Q
200-240
50/60
3
3+PE
18,9
25
20
14/2.5
X
200-240
50/60
1/3
2/3+PE
N/A
N/A
N/A
N/A
N
440-480
50/60
3
3+PE
19,8
25
20
14/2.5
P
380-415
50/60
3
3+N+PE
22,8
30
25
14/2.5
Q
200-240
50/60
3
3+PE
N/A
N/A
N/A
N/A
X
200-240
50/60
1/3
2/3+PE
N/A
N/A
N/A
N/A
3x2 kW
3x4 kW
Table 4
37
4
WARNING
The washer-extractor should be connected to an individual branch
circuit not shared with lighting or other equipment.
Electrical Specifications WFF135, IWF135, IWF030, CWF135, CWF030
135 liters / 30 pounds
Boiler Fed/Steam Heat
US
NON-US
AWG/mm2
Recommended
Circuit Breaker (USmarket)
Full Load Amps
kW Standard
Heating Elements
NON-US
AWG/mm2
Recommended Circuit
Breaker (US-market)
Full Load Amps
Wire
Phase
Cycle
Voltage
Code
US
Electric Heat
N
440-480
50/60
3
3+PE
1,0
10
6
14/2.5
19,8
25
20
14/2.5
P
380-415
50/60
3
3+N+PE
1,0
10
6
14/2.5
22,8
30
25
14/2.5
Q
200-240
50/60
3
3+PE
2,5
10
6
14/2.5
X
200-240
50/60
1/3
2/3+PE
2,5
10
6
14/2.5
6x2 kW
35,3
40
40
12/4.0
N/A
N/A
N/A
N/A
Alternative Electric Heat Options
N
440-480
50/60
3
3+PE
24,5
30
25
14/2.5
P
380-415
50/60
3
3+N+PE
28,2
40
32
12/2.5
Q
200-240
50/60
3
3+PE
43,5
40
50
12/4.0
3x3 kW +
3x2 kW
X
200-240
50/60
1/3
2/3+PE
N/A
N/A
N/A
N/A
N
440-480
50/60
3
3+PE
29,2
40
32
12/4.0
P
380-415
50/60
3
3+N+PE
33,7
40
40
12/4.0
Q
200-240
50/60
3
3+PE
X
200-240
50/60
1/3
2/3+PE
6x3 kW
51,8
50
63
10/6.0
N/A
N/A
N/A
N/A
Table 5
38
4
WARNING
The washer-extractor should be connected to an individual branch
circuit not shared with lighting or other equipment.
Electrical Specifications WFF165, IWF165, CWF165
165 liters / 35 pounds
Boiler Fed/Steam Heat
1,4
10
6
14/2.5
P
380-415
50/60
3
3+N+PE
1,4
10
6
14/2.5
Q
200-240
50/60
3
3+PE
3,0
10
6
14/2.5
X
200-240
50/60
1/3
2/3+PE
3,0
10
6
14/2.5
6x3 kW
AWG/mm2
Full Load Amps
3+PE
Recommended
Circuit Breaker (USmarket)
Wire
3
Full Load Amps
Phase
50/60
kW Standard
Heating Elements
Cycle
NON-US
440-480
AWG/mm2
Voltage
Recommended Circuit
Breaker (US-market)
Code
US
N
Electric Heat
US
NON-US
29,4
40
32
12/4.0
33,9
40
40
12/4.0
52,3
50
63
10/6.0
N/A
N/A
N/A
N/A
Alternative Electric Heat Options
N
440-480
50/60
3
3+PE
24,7
30
25
14/2.5
P
380-415
50/60
3
3+N+PE
28,4
40
32
12/2.5
Q
200-240
50/60
3
3+PE
44,0
40
50
12/4.0
3x3 kW +
3x2 kW
X
200-240
50/60
1/3
2/3+PE
N/A
N/A
N/A
N/A
N
440-480
50/60
3
3+PE
20,2
25
20
14/2.5
23,0
30
25
14/2.5
35,8
40
40
12/4.0
N/A
N/A
N/A
N/A
P
380-415
50/60
3
3+N+PE
Q
200-240
50/60
3
3+PE
X
200-240
50/60
1/3
2/3+PE
6x2 kW
Table 6
39
4
Liquid soap connection (option)
Connection of the liquid soap hoses
The liquid soap connection consists of 8 connections for liquid soap
(See Label 5).
The central opening is used for ventilation.
WARNING
Label 5
Dangerous Chemicals. May damage eyes and skin. Wear eye and
hand protection when handling chemicals; always avoid direct
contact with raw chemicals. Read the manufacturer’s directions for
accidental contact before handling chemicals. Ensure an eye-rinse
facility and an emergency shower are within easy reach. Check at
regular intervals for chemical leaks.
CAUTION
Drill out plugs and nipples before making supply hose connection.
Failure to do so can cause buildup of pressure and risk a tubing
rupture.
Electrical connection of the liquid soap pumps
On machines equipped with a liquid soap connection, connect the wires directly on
the print board next to the ground wire connection (option). Connect as indicated on
the wiring diagram.
The two connectors on the right give a tension of 220V ~ (max. 4A) which can
be applied to drive 220V ~ soap pumps. If more than 4A is required, an external
tension will have to be used. 6 connections have been provided, of which one (S6)
can be used to drive a waterproofing pump (e.g. for rain coats, etc.). (See Label 6)
Label 6
40
4
The 220V can be transformed to other values to drive other type soap pumps.
Example: pumps 24V ~. (See Label 7)
Label 7
Also, pumps with different operating tension can be combined.
Example: 5 pumps 220V ~ and 1 pump 24V ~. (See Label 8)
Label 8
With an external tension 24V DC (See Label 9)
Label 9
41
4
Connection of a central operating
panel for coin machines (option)
WARNING
To reduce the risk of electric shock, disconnect this appliance from
the power supply before attempting any user maintenance. Turning
the controls to the OFF position does not disconnect this appliance
from the power supply.
At the backside above the main connectors, you find a printboard, to which the
central operating panel for coin machines can be connected.
The right connectors form a potential free output contact as a result of which the
operating panel detects when the machine is activated or not.
The left connectors receive the signal, by means of which a machine is chosen
through the operating panel.
There are 3 different variations possible according to the output voltage of the
operating panel. (See Labels 10, 11 and 12)
Label 10
Label 11
Label 12
A
IMPORTANT:
If a machine is equipped with this kind of printboard or if a printboard has been
built in, the resistance of the cycle contact (A) may no longer be present on
the main printboard. (See Label 13)
When this resistance is present, it has to be cut out of the main printboard.
Label 13
42
5
Steam connection
WARNING
Never touch internal or external steam pipes, connections,
or components. These surfaces can be extremely hot and
will cause severe burns. The steam must be turned off and
the pipe, connections, and components allowed to cool
before the pipe can be touched.
Machines with steam heating must have a steam valve between the steam
installation and the machine.
5
3
4
3
2
1
6
7
With direct steam injection into the machine (See Table 7)
1. Steam pipe
2. Steam cut-off valve
3. Pipe coupling
4. Steam filter
5. Magnetic steam valve
7
6. Curve MF
7. Steam hose with appropriate pipe coupling
7
Steam inlet
connection, inch
Number of
steam inlets
Recommended
pressure, bar
Recommended
pressure, psi
Maximum
pressure, bar
Maximum
pressure, psi
Steam Supply Information
For the WFF65 = WFF65, IWF065, IWF014, CWF065, CWF014
3/8
1
2.0 - 5.5
30 - 80
5.5
80
For the WFF75 = WFF75, IWF074, IWF018, CWF074, CWF018
3/8
1
2.0 - 5.5
30 - 80
5.5
80
For the WFF100 = WFF100, IWF100, IWF025, CWF100, CWF025
3/8
1
2.0 - 5.5
30 - 80
5.5
80
For the WFF135 = WFF135, IWF135, IWF030, CWF135, CWF030
3/8
1
2.0 - 5.5
30 - 80
5.5
80
For the WFF165 = WFF165, IWF165, CWF165
3/8
1
2.0 - 5.5
30 - 80
5.5
80
MODEL
Table 7
43
6
Technical remarks
Internal connections of the electrical heating
1 AC
Heating
R5
3kw
LC1D0901
Table 8
3 AC
Heating
3x230V
R5
3x400V
R5
4,2kw
3x1,4kw
See label 14
LC1D0901
See label 15
LC1D0901
6kw
3x2kw
See label 14
LC1D0901
See label 15
LC1D0901
9kw
3x3kw
See label 14
LC1D1810
See label 15
LC1D0901
12kw
3x4kw
--------
--------
See label 14
LC1D0901
12kw
3x2kw
3x2kw
See label 14
See label 14
LC1D1810
LC1D1810
See label 15
LC1D0901
15kw
3x2kw
3x2kw
See label 14
See label 14
LC1D1810
LC1D1810
See label 15
LC1D1810
18kw
3x3kw
3x3kw
See label 14
See label 14
LC1D1810
LC1D1810
See label 15
LC1D1810
21kw
3x3kw
3x4kw
--------
--------
See label 15
See label 14
LC1D1810
LC1D1810
24kw
3x4kw
3x4kw
--------
--------
See label 14
See label 14
LC1D1810
LC1D1810
Table 9
Label 15
Label 14
B = Black
Br = Brown
Gy = Grey
Bu = Blue
R = Red
W = White
NOTE:
Other executions are available as options.
44
7
Maintenance instruction of the machine
WARNING
To reduce the risk of electric shock, disconnect this appliance
from the power supply before attempting any user maintenance.
Turning the controls to the OFF position does not disconnect this
appliance from the power supply.
Before starting wiring or inspection, power must be switched OFF,
check to make sure that the operation panel indicator is off.
Any person who is involved in wiring or inspection shall wait for
at least 10 minutes after the power supply has been switched OFF
and check that there is no residual voltage using a tester or the
like. The capacitor of the inverter or the EMC filter is charged with
a high voltage for some time after power OFF, and it is dangerous.
End of day
 Clean AC drive filter:
a. Snap off external plastic cover which contains filter.
b. Remove foam filter from cover.
c. Wash filter with warm water and allow to air dry. Filter can be vacuumed clean.
General maintenance
 Clean the entire cabinet of the machine regularly and remove all traces of soap,
etc....
 Remove all detergent residue in the soap dispenser with hot water.
 Clean the door gasket and remove all detergents and other products.
 Shut off the main water, steam, and power connections at the end of each day.
Do not change the setting of the water inlet taps on boiler fed machines once
these have been installed.
 It is recommended to leave the door and soap dispenser open after use, to
ventilate the machine.
 Check for proper door lock operation on a daily basis.
Periodical maintenance
 The V-belts of the motors should be retightened after two to three months when
first used. This is necessary because these belts are subject to a one-time
stretching when first used. If this is not done, the belt starts to slip after a few
months and will break shortly afterwards.
 Check the water inlet filters to make sure they are not blocked by calcification.
 Check the drain valve for obstructions.
 Lubricate the bearings after every 200 hours of operation or replace the automatic
lubricator annually.
45
7
Annual maintenance
Belt tension:
 Verify that the belts are running in the middle of the basket pulley.
 Verify the belt tension according to the table below. Belt tension measurements
should be taken as close as possible to the center of the belt span (see figure).
Belt tension testing table
Model
Belt
Frequency (Hz)
Tension force (N)
Deflection (mm)
Deflection force
MIN
MAX
MIN
MAX
at MIN
tension
at MAX
tension
MAX
WFF65
PJ8 1355
98
103
301
332
8,8
7,9
40
WFF75
PJ8 1355
98
103
301
332
8,8
7,9
40
WFF100
PJ8 1355
98
103
301
332
8,8
7,9
40
WFF135
PK7 1520
65
69
425
489
11,5
10,8
53
WFF165
PK7 1520
65
69
425
489
11,5
10,8
53
1 Deflection
2 Span length
46
8
Contact Information
Nameplate
Nameplate Location
The nameplate is located at the rear of the machine. Always provide the machine’s serial
number and model number when ordering parts or when seeking technical
assistance. See labels 16 and 17.
Label 16
Label 17
47
8
Position of the Serial plate
Replacement Parts
If literature or replacement parts are required, contact the source from which the
machine was purchased or contact the phone numbers or websites shown on the
nameplate.
48
9
Repair and after-sales service
 In case of important malfunctions and deficiencies, which you cannot resolve
yourself, contact your distributor.
Distributor : Name:.....................................................................................
Address:.................................................................................
Tel.:.........................................................................................
Machine : Type:.......................................................................................
Program:.................................................................................
Date of installation:.................................................................
Installed by:............................................................................
Serial number:........................................................................
Operation voltage and frequency:..........................................
Alliance Laundry Systems
Shephard Street, PO BOX 990
Ripon, WI 54971-0990
United States
Tel: 001 920 748 3121 - Fax: 001 920 748 1645
www.comlaundry.com
Alliance International bvba
Nieuwstraat 146 - B-8560 Wevelgem (Belgium)
Tel. +32 56 41 20 54 - Fax +32 56 41 86 74
info@alliancels.eu - www.alliancels.eu
49