User Guide

Tone Alert and Ring Tone Amplifier
Tone Alert and Ring Tone Amplifier
Unication supported products:
Category
Model
Alphanumeric
Alpha Gold, Alpha Elite and Alpha Gold Plus
Numeric, Two-way messaging
NP88, M90 ReFlex
Other applications:
Category
Cell phones
Model
The UNI MAX device is compatible with most
cellular phones.
Non Unication Pagers
The UNI MAX device is compatible with most
pagers.
02
Thank you for purchasing Unication’s product, UNI MAX.
UNI MAX will always remind you that your pager has been paged. Its high volume audible alert will
always catch your attention. We sincerely hope you enjoy its capabilities.
This manual can be downloaded from Unication official website:
http://www.unication.com
http://www.uni.com.tw
Package Content
Your UNI MAX package should include the following items:
4
wall transformer
2
1
dock adapter
for Alpha Gold
UNI MAX
1 Base unit UNI MAX
2 Wall transformer
3 Two retaining screws are for
installingthe insert.
Dock adapter for the Unication
4 Alpha Gold and Elite pagers.
3
screws for dock adapter
5
dock adapter
for NP-88
5 Dock adapter for the NP 88
numeric pager.
03
Tone Alert and Ring Tone Amplifier
General Information
UNI MAX can be used with pagers or other alerting device such as cell phones.
We’ll introduce you how to install UNI MAX with your alerting device and its key features below.
For best operation, make sure to place the alerting device into its toner alert mode,
or the alert may not be detected.
1. Operation with your Unication Pager:
For best operation, select the correct dock adapter if needed and settle in place to match your Unication pager.
Then simply set the pager into UNI MAX as shown in the illustrations below.
M90
04
NP88
Alpha
Gold
Alpha
Elite
Before inserting the right
pager type dock adapter,
please be sure to remove
the screws which are fitted
inside the socket.
After settling the right dock
adapter, please remember to
screw back to secure it.
2. Operation with your Cell Phone:
Your Uni Max is also designed to work with most of the popular brands of cellular phones.
Please turn the cell phone to any audible alert mode and then place into the UNI Max.
For better performance,
please check a best way
to locate the cell phone to
make a better reaction.
Phone
3. Feature and Function Locations
Alert time setting
Alert tone selector
Reset
Volume control
05
Tone Alert and Ring Tone Amplifier
Charging UNI MAX
Your UNI MAX can use three separate power sources. Using the wall transformer supplied with the unit,
installing the optional rechargeable battery pack. Or you can install the standard AA alkaline batteries only.
The UNI MAX will operate normally from the wall transformer, but if the main power is interrupted, the UNI
MAX will automatically switch over to the rechargeable batteries.
NOTE:
(1) The UNI MAX will only recharge the optional Unication rechargeable battery pack.
You can use rechargeable batteries and still leave the wall transformer connected.
(2) Do not use standard AA batteries and still leave the wall transformer connected.
06
1. Connecting to the Wall Transformer
Connect the power cable to the UNI MAX and then plug the AC transformer into the
electrical socket (90-240VAC).
When the UNI MAX is powered, the GREEN power LED will illuminate.
2. Installing the Rechargeable Battery Pack
You can select to use rechargeable battery pack as the main power source. You can
connect the wall transformer additionally, and then the rechargeable battery pack will be
used as a backup power source. Before installing the rechargeable battery pack, you can
remove the wall transformer if needed.
07
Tone Alert and Ring Tone Amplifier
Step1: Remove the retaining screw in the battery door and then lift off the battery compartment cover.
Step2: Then simply insert the pin connector from Battery Pack into the mating connector inside
the battery compartment of the UNI MAX unit.
Socket
Step3: Reinstall the battery cover and the fastener, and then you can reinstall the wall transformer
if needed. After the batteries are inserted, the GREEN Power LED will automatically light.
NOTE:
To avoid the risk of electrical shock, DO NOT alter the charging or charge batteries other than
the battery pack intended for this unit.
08
3. Installing the Alkaline Batteries
You can select to install 3 standard AA alkaline batteries as the main power source alone.
Step1: Remove the retaining screw in the battery door and then lift off the battery
compartment cover.
Step2: Observing the correct polarities, and please insert the normal batteries into
the UNI MAX battery compartment accordingly.
Step3: Reinstall the battery cover and the fastener. After the batteries are inserted,
the GREEN Power LED will automatically light and flash.
NOTE:
For best operation, please unplug the wall transformer before using the alkaline batteries.
09
Tone Alert and Ring Tone Amplifier
3. LED Indicator
LED indicator will help you to identify the status of UNI MAX.
10
Action
With wall transformer
Green
Orange
Red
Yes
Yes
Yes
Green flash
Red flash
No
No
No
No
Meaning
The main power status is normal.
Rechargeable batteries are low and charging.
Rechargeable batteries have problem,and can’t be
charged.
The batteries are normal.
The batteries are low.
No power
Operation
1. Alert Tone Selection
press
There are ten alert tone types to choose from.
Follow the directions below to sample and then to select your favorite alert.
(1) Listening to current tone alert setting:
Depress then release the Alert Tone Setting Button to listen to the current alert type.
(2) Listen to the next alert tones type:
Depress then release the alert selector switch again and the next alert type will sound.
(3) Selecting your alert tone:
When sampling thru the alert tones press the Alert Tone Setting Button once again and hold
continuously until hearing a short beep. The current alert type has now been selected.
11
Tone Alert and Ring Tone Amplifier
2. Volume Setting
Press and turn the volume knob to set an appropriate maximum level for the alert volume.
When an alert has been detected the UNI MAX will begin the alert cycle at a low volume
level then increasing the alert level over the time period you have selected.
1.press
12
2.press & turn
3. Alert Time Setting
The UNI MAX will alert audibly and visually when an alert has been detected. You can select
the time duration of the UNI MAX alert by adjusting the alert time setting switch. The
selections are mute (no audible alert), one minute, three minutes or a continuous alert. Use
the selection switch as pictured below to make the selection.
push
Mode
Meaning
Mute
No audible alert.
Visual alert indicator will still be on.
1 min
Audible alert duration is one minute.
3 min
Audible alert duration is three minutes.
Continuous
Audible alert duration is continuous.
13
Tone Alert and Ring Tone Amplifier
4. Reminder
After a detected alert, to remind you of the detected alert, the Reset button will keep flashing
until it is depressed.
5. Terminating the Alert Cycle
The alert stops automatically when the selected alert time has expired excluding the
continuous mode.
You may also depress and release the reset button to terminate the alert cycle.
6. Operation of the Optional Battery Pack
Battery pack charging time: 10 hours maximum from a completely discharged condition.
14
Specification
General Specification
Alert Tone SPL : Max. >100 dBspl @ 30 cm: Min. > 70 dBspl @ 30 cm (Volume control on minimum)
Standby Power Consumption : < 15 mW
Max. Vol. Power Consumption : 1.5 Watt
Operating Temperature : 0 deg C ~ +50 deg C
Storage Temperature : -20 deg C ~ +85 deg C
Powered by Standard Battery : AA Alkaline Battery x 3
Powered by Rechargeable Bat. : Battery Pack (Ni-MH 62U x 3)
Dimension : 11 W x 8 H x 8 D
Weight : 120 gram (Not include battery)
Certification : CE / FCC Part 15 B digital device
Power Adapter Specification
Input Voltage : 90 - 240V AC; 50/60Hz
Output Voltage : 6 V 2.5 A
Certification : CE / FCC Part 15 B digital device, US Energy Star compliance CEC
Option Accessory Specification
Powered by Rechargeable Bat. : Battery Pack (Ni-MH AA x 3)
Powered by Standard Battery : AA Alkaline Battery x 3
15
Unication Group
Unication USA Inc,
1901 E. Lamar Blvd., Arlington, Texas, 76006,USA.
Tel : 817-303-9320
Fax : 817-886-3424
E-mail : salesenquiry@uni.com.tw
E-mail : sales@unication.com
http://www.unication.com
http://www.uni.com.tw
Patent Pending