Fans - Micmac Fire and Safety Limited

MICMAC FIRE & SAFETY SOURCE | PRODUCT CATALOGUE
FANS
Super Vac
Models E2 / EX
XP / VR2
See Pag
age 14 fofor
A
Electric PPV fans allo
l w clean airr, low noise
MODEL# MO
MOTOR
TOR SSTART
TAR
A T<W
<WATT>
ATT>
T R
RUN
UN HEIGHT ,WID
,WIDTH,
TH, DEPTH WEIGHT RPM SET BACK
BACK ANGLE
ANGLE CFM
716E2
716EXP
716VR2
716VR3
718E2
718EXP
718VR2
718VR3
720E2
720EXP
720VR2
720VR3
724E2
724EXP
724VR2
724VR3
See Page 1
1Hp Std
4000
4000
1Hp Haz
1Hp VarR 2000
1.25Hp VarR 2000
4000
1Hp Std
4000
1Hp Haz
1.5Hp VarR 2000
1.25Hp VarR 2000
1Hp Std
4000
4000
1Hp Haz
1.5Hp VarR 2000
1.25Hp VarR 2000
4000
1Hp Std
4000
1Hp Haz
1.5Hp VarR 2000
1.25Hp VarR 2000
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
20.00” x 20.50” x 16.00”
20.00” x 20.50” x 16.00”
20.00” x 20.50” x 16.00”
20.00” x 20.50” x 16.00”
21.75” x 22.50” x 18.75”
21.75” x 22.50” x 18.75”
21.75” x 22.50” x 20.00”
21.75” x 22.50” x 20.00”
25.50” x 25.50” x 18.75”
25.50” x 25.50” x 18.75”
25.50” x 25.50” x 20.00”
25.50” x 25.50” x 20.00”
27.75” x 29.00” x 20.50”
27.75” x 29.00” x 20.50”
27.75” x 29.00” x 20.50”
27.75” x 29.00” x 20.50”
67#
70#
66#
64#
86#
91#
85#
83#
87#
92#
86#
84#
102#
107#
109#
107#
Standard Electric Motor
Vaariable Speed VR2
Vaariable Speed VR3
The E2 models feature a tough,
no frills method of supplying clean
air to a structure. Perfect for the
department buying their first
electric PPV or when budgets are
tight.
The VR2 models provide precise
control of the air movement and
up to 30% more air flow than single
speed electric PPV’s.. Fuull control
of fan speed with the ability to run
on GFCI circuits make these units
highly versatile.
The V R3 Models provide precise
control of air movement and up to
35% more air flow than single speed
electric PPVs. The V R3 is the only
Variable Speed fan in the industry
that will run on GFCI circuits and
new hydraulic generators without
surging at high speed.
TECECH INNFO
52
www
w..super vac.com/vr3
18°
18°
18°
18°
18°
18°
18°
18°
18°
18°
18°
18°
18°
18°
18°
18°
6,740
6,740
9,500
9,950
8,140
8,140
12,355
12,820
10,190
10,190
14,625
15,110
13,320
13,320
15,875
16,370
The EXP models feature an
intrinsically safe explosion proof
motor with an explosion proof
switch for the highest level
of explosion protection in the
industry. Perfect for the
department that wants to be
able to use their electric PPV
for all types of ventilation
situations.
You
o can easily ttakke the PPV up stairs or
over large diam
diameter hose when the wheels
are to the back (engine side) of the fan.
Also, as you arrive at the ventilation point of the
structure, you do not have to turn your back on
the fire while positioning the fan.
TECECH INFFO
www.super vac.com/vr2
sales@mmfss.ca
6’
6’
6’
6’
6’
6’
6’
6’
6’
6’
6’
6’
6’
6’
6’
6’
Hazardous Location
“All Super Vaac Electric
Elec PPV fans can be wired for 220 Volt
o operation on request.”
FOR MORE INFORMATION
I
ON V--AT TA
TACK
VE
EN
NTIL
IL ATIN
ING WITH FANS
A
TUR
RN TO PAGE 18
1750
1750
2500
2500
1750
1750
2400
2400
1750
1750
2400
2400
1750
1750
2400
2400
MICMAC FIRE & SAFETY SOURCE | PRODUCT CATALOGUE
FANS
GGAS
AAS
Model 716G4
Space saavving ... Fits Small Compartments
nts on anny App
p
MODEL#
H.P.
H.P.
HEIGHT,
HEIGHT, WIDTH,
WIDTH, DEPTH
WEIGHT
716GC
716G4 -H
716G4-B
5.0
4.0
3.5
20.00” x 20.50” x 16.00”
20.00” x 20.50” x 16.00”
20.00” x 20.50” x 16.00”
6 2#
62 #
60#
H = Honda GX
GC = Commercial Engine by Honda
RPM SET BACK
BACK
3520
3575
3450
ANGLE
ANGLE
CFM
18°
18°
18°
10,230
11,740
9,940
6’
6’
6’
B = Briggs & Stratton
and versatile for
Portable
o
fo small to medium residential ventilation.
The 716 is designed to compact dimensions that fit the tightest pumper compartments.
An excellent choice when light weight and low cost are critical in your district.
See Paage 14 foor
Exhaust Extteenssion
& Glove Heeat
ea
Shield
Models 718G4/ 720G4/ 724G4 The 18”” is the most popular PPV fan in the Fire Ser vice
MODEL#
718G4 -B
718G4 -H
718GC
720G4-B
720G4-H
720GC
724G4-B
724G4-H
H.P.
H.P.
HEIGHT,
HEIGHT, WIDTH,
WIDTH, DEPTH
WEIGHT
RPM
6.5
6.5
5.0
21.75” x 22.50” x 18.75”
21.75” x 22.50” x 18.75”
21.75” x 22.50” x 18.75”
25.50” x 25.50” x 18.75”
25.50” x 25.50” x 18.75”
25.50” x 25.50” x 18.75”
27.75” x 29.00” x 20.50”
27.75” x 29.00” x 20.50”
79#
82#
74#
89#
92#
84#
119#
133#
3770
3535
3360
3385
3350
3185
3245
3435
6.5
6.5
5.0
10
9
SET BACK
BACK ANGLE
ANGLE
8’
6’
6’
6’
6’
6’
6’
8’
18°
18°
18°
19°
19°
19°
18°
18°
CFM
15,350
15,590
14,810
18,060
18,580
17,650
21,100
20,920
H = Honda GX
B = Briggs & Stratton
GC = Commercial Engine by Honda
Honda GX
The most popular sizes in the industry and the perfect combination of small size
and high power. They feature the highest horsepower in their class for maximum
airflow. Perfect for the department with a mixture of residential and small
commercial structures iin their district.
Briggs &
Stratton
Commercial Engine by Honda
Model 730G4H
The Workho
o orse for
o Large Waarehouses
MODEL#
H.P.
H.P.
HEIGHT,
HEIGHT, WIDTH,
WIDTH, DEPTH
WEIGHT
730G4-H
13
38.75” x 37.00” x 27.50”
163#
RPM SET BACK
BACK
3220
ANGLE
ANGLE
LE
CFM
9°
26,73
10’
H = Honda GX
The most powerful portable fan in the fire service. This fan is a serious workhorse
to make quick work of ventilating larger occupancies. Peerfect for the department
with large commercial structures in their district.
Available
onda Engin
53
MICMAC FIRE & SAFETY SOURCE | PRODUCT CATALOGUE
FANS
MOOKE EEJJECTORS
Models P124, P164, P200, P244
Wor
o ld Famous Super Vac Smoke Ejectors
MODEL# *MO
*MOTOR
TOR
P124S
P124SE
P164S
P164SE
H.P
H.P.. SSTART
TAR T < WWATTS
ATT S > R
RUN
UN HEIGHT,
HEIGHT, WID
WIDTH,
TH, DEPTH
TEAO 1/2
HAZ
1/2
TEAO 1/3
1/3
HAZ
P200S TEAO
1
P200SE HAZ
1
P244S TEAO 1-1/2
P244SE HAZ 1-1/2
The Mos
Poopula
Mode
P164
Paage 15
P
or Duct
2000
2000
2000
2000
4000
4000
6000
6000
800
800
700
700
1500
1500
2100
2100
15.50” x 15.00” x 13.00”
15.50” x 15.00” x 13.00”
19.25” x 18.75” x13.00”
19.25” x 18.75” x13.00”
25.50” x 24.75” x 16.25”
25.50” x 24.75” x 16.25”
28.50” x 28.00” x 18.75”
28.50” x 28.00” x 18.75”
WT.
WT. SHROUD
S H RO UD <C.F.M.>
<C. F. M. >V
VENTURI
ENTURI
40#
42#
4 4#
49#
2750
2750
3200
3200
85# 6700
93# 6700
110# 8600
115# 8600
3700
3700
5200
5200
9500
9500
10800
10800
The P164 is the most popular unit in the fire/rescue service. It is the perfect combination of high airflow
and easy to handle size. The single most popular fan in the historyy of the fire ser vice.
The P200 is capable of bigger ventilation tasks and higher airflows. At 1 horsepower it will run on standard
15 amp household circuits. Perfect for the department that has a mix of residential and commercial
buildings in their jurisdiction.
The *P244 is the largest smoke ejector available. Peerfect for the department that has a mix of large residential
and mid-sized commercial buildings in their response area. *Note: Requires a 20 amp circuit to start and run.
The P124 is designed for high powered air movement in a compact size. Turning at 3500 rpm
the fan is small but mighty. Perfect for the department that wants to eject smoke and have a small unit for
confined space ventilation.
“All Superr Vaac Smoke Ejectors can be wired
ed for 220 Voolt operation on requ
request.”
Model HF164
Most Powerful 16”” fan in the Industry
MODEL# *MO
*MOTOR
TOR
H.P.
H.P. START
S TAR T < WWATTS
ATT S > R
RUN
UN HEIGHT
HEIGHT,, WID
WIDTH,
TH, DEPTH
HF164 TEAO 1-1/2 6000
HF164E HAZ 1-1/2 6000
2100 19.50” x 18.75” x 16.00”
2100 19.50” x 18.75” x 16.00”
W
WT.
T. SHROUD
S H RO U D <C.F.M.>
<C .F. M. > VENTURI
VENTURI
59#
63#
4950
4950
9620
9620
The *HF164 is the most powerful 16” fan in the industry and can easily be
used for negative or positive pressure ventilation. Running at 3500 rpm,it has
the power to force or pull air deep into a structure or underground vault.
*Note: Requires a 20 amp circuit to start and run.
www.super vac.com/hf
Model GP164S
Gas Super Vac Smoke Ejector
MODEL#
H.P.. HEIGHT,
H.P
HEIGHT, WIDTH,
WIDTH, DEPTH WEIGHT RPM SET BA
BACK
CK AN
ANGLE
GLE
CFM
GP164S
4
9,250
19.50” x 19.00” x 15.50”
55# 3,500
6’
10°
The GP164 is the smallest gasoline powered fan in the industryy. The versatile design features
the ability to attach duct to the inlet or outlet side of the fan. An excellent choice when size
and versatility are required in your district.
sales@mmfss.ca
54
GAS
MICMAC FIRE & SAFETY SOURCE | PRODUCT CATALOGUE
FANS
BIG VENTT FFAAN
Model SVU Series
MODEL#
SVU
POWER
PO
WER SOUR
SOURCE
CE
Gas, Diesel,
Hydraulic
A Mighty Blowing Power... Weighing
e
in at 250,000 CFM
H.P
H.P..
HEIGHT , WID
WIDTH,
TH, DEPTH
50 to 200
70” x 70” x 42”
C.F
C.F.M.
.M.
20,0000
Wiith it’s variety of configurations
c
Sc PPV in the
and multiple uses, the SVU is the most versatile Large Scale
industryy. F
as rehabilitation
ise buildings, mass
areas, the SVU is ready for the task. Available on a custom trailer, skid unit, truck and flatbed
be mount,
n system,
the SVU is loaded with optional features including: scissor lift, rotation/tilt platform, misting
and lighting package.
h
Got a specific ventilation application your department is challenged
ne and
with? Need a custom piece of ventilation equipment designed
a industry leading experience go to wwork
built? Lett Super Vac’s
and provide a solution to your ventilation equipment needs.
ds
Whether it is a complete mobile ventilation apparatus or a
skid mounted
ted fan, Super Vac
a has the Know How and
Expertise to fulfill your Custom requirements.
d SVU & BFF
See more Product
phottoos Tuurn to Back Cover
Model BFF Series
MODEL# PO
WER SOUR
CE
POWER
SOURCE
BFF
Gas, Diesel
Blow Up a Storm foor Large Buililldi
H.P
H.P..
200 to 600
HEIGHT ,WID
TH, DEPTH
,WIDTH,
88” x 84 ”x 60”
dT
l
C.F.M.
70,00
iith capabilities of over 750,000
e BFF series ventilators are the
l
lution
to the largest ventilation
hallenges. Large warehouses,
shopping malls, sports complexes,
tunnels and retail super stores are
typical of the situations faced by
today’s emergency service providers.
www
w..super vac.com/svu
55
MICMAC FIRE & SAFETY SOURCE | PRODUCT CATALOGUE
FANS
CSV
Models NANO
A P8S & P8XE
New Teechnology for
o Confined Spaces
MODEL#
P8S
P8XE
MO
MOTOR
TOR
H. W
W.. D.
1/3 Hp, Standard
1/3 Hp, Haz.Location
NanoPac15
NanoPac25
NanoPacXE15
NanoPacXE25
11.5” x 10.75” x 16”
11.5” x 10.75” x 16”
WT.
WT.
CFM
20#
22#
1037
1037
P8S Blower & 15 feet of duct for Standard Ventilation
P8S Blower & 25 feet of duct for Standard Ventilation
P8XE Blower & 15 feet of duct for Hazardous Ventilaton
P8XE Blower & 25 feet of duct for Hazardous Veentilat
entilation
Free Air CFM Shown-with 1-90°Bends airflow is 817 cfm
Free Air CFM Shown-with 2-90°Bends airflow is 723 cfm
www.super vac.com//nano
Super
per Vac’s
a Nano is the perfect, cost effective
effe solution to confined space ventilation challenges.
The rugged Nano can be used for either supply air or exhaust ventilation, delivering the highest
airflow in its class. It comes in your choice of standard or static
dissipating Hazardous Location options. Also available in
a kit with ducting, the NanoPac’s include both the fan
and your choice of 15 or 25 feet of bag-o-duct that easily
attaches to the inlet or outlet of the fan.
fa
Comes with each model. Model P8XE has black duct, electrostatic
resistance. Model P8S has yellow duct.
FFiire Reesistant ducting available. See page 15.
Models AFF, F, HF &VF Series
Confined Space Fans 12
12”,, 16
16”,, 20
20”” & 24”
24
The F series is the perfect combination of a low noise, high output design.
The larger sizes are perfect for your bigger requirements including machine
cooling, and larger spaces. All sizes are available in both standard and
Hazardous Location styles. Note: F244 and F244E require a 20 amp circuit to start and run.
Combined with the optional tilt frame attachmentt, (shown on the HF164 inn the lefft photo)
becomes the most versatile ventilation
ation system in the industrry.
se control of
The VF models provide precis
precise
the air movement and up to 30% more air
flow than single speed electricc fans. Fuull
control of fan speed, compatible with GFCI
circuits, make these units highly versatile.
The AF series are the most effective air
powered fans available. Complete with
their own filterr, gauge, and oillerr, they have
everything you need for lots of air movement
without a lot of air usage.
The HF series are the most powerful fans
that can easily be used for negative or
u
at
positive pressure ventilation.RRunning
3500 rpm, they have the power to force or
pull air deep into a structure or underground
vault.Available in Hazardous Location style.
Note: HFF164
1 4 and HFF11644E rrequire
a 20 amp cirrccuit to start and run.
sales@mmfss.ca
56
MODEL#
AF124
AF164
AF200
AF244
F124
F164
F200
F244
HF124
HF164
VF124
VF164
VF200
*MO
*MOTOR
TOR
.50Hp Air
1.75Hp Air
1.75Hp Air
5.00Hp Air
.33Hp TEAO
.50Hp TEAO
1.00Hp TEAO
1.50Hp TEAO
.50Hp TEAO
1.50Hp TEAO
1Hp Variable
1Hp Variable
1Hp Variable
VVOLTAGE**
OLLTAGE** AMPS
AMPS
80psi
100psi
100psi
100psi
115/230
115/230
115/230
115/230
115/230
115/230
115/230
115/230
115/230
20cfm
70cfm
70cfm
175cfm
5.8/2.9
5.8/2.9
12/6
20/10
8/4
17/9
12/6
12/6
12/6
*F and HF Series avaiable in Hazardous Location Mootor listed for Class 1, Group D.
Add an E to model (F244Ei), may add to weight slightly.
**F and HF Series available in 3 phase versions also.
RPM
RPM
3500
3600
1900
2500
1725
1725
1725
1725
3 450
3 450
0-2400
0-2400
0-1900
WT.
WT. SHROUD
S H R O U D <<C.F.M.>
C . F. M . > V
VENTURI
ENTURI
39
45
60
105
40
44
85
110
40
44
48
52
88
2800
5100
6700
9700
1380
3200
6700
86 0 0
2750
4950
1900
3500
6900
380 0
96 0 0
98 0 0
14200
2500
5200
9500
10000
3700
9620
3100
3100
98 0 0
MICMAC FIRE & SAFETY SOURCE | PRODUCT CATALOGUE
FANS
ENVVIRRONMENTTAL
SPECCIALTLTY
Model WT Water
a Power “The Ven
entilatio
e
n Specialists”” hhas all kinds of Energy Efficient Fans
MODEL#
POWER
PO
WER SOURCE
SOURCE
H.P
H.P..
HEIGHT ,WID
,WIDTH,DEPTH
TH,DEPTH
W
WT.
T.
C.F
C.F.M.
.M.
718W T
Water, 100-250psi
5.5
21.75” x 22.50” x 18.75”
76#
16,830
720W T
Water, 100-250psi
5.5
25.50” x 25.50” x 18.75”
78#
19,650
724W T
Water, 100-250psi
12
27.75” x 29.00” x 21.00”
88#
22,470
730W T
Water, 100-250psi
12
38.75” x 37.00” x 27.50”
102#
24,800
The WT series water powered fans are powerful units for extreme conditions. These units are perfect
for districts that include docks, shipping facilities, and large commercial structures that may require the
ventilation of hazardous atmospheres.
Model # Mister Fan F164M
MODEL# SSTART
TAART <<WATTS>
WAT T S > R
RUN
UN
F164M
2000
700
Great foor Summer Training and Rehab
REQUIREMENT
REQUIREMENTSS
HEIGHT,
HEIGHT, WIDTH,
WIDTH, DEPTH
WT.
WT.
2 gph, water
19.75”x 18.75” x 13.00”
41#
SHROUD
S H R O U D <C.F.M.>
< C . F. M . > VENTURI
VENTURI
3200
5200
The F164M produces a cooling mist that reduces air temperature through evaporation. Unlike other
misting units that can only be used a few times, the F164M is tough as nails for years
of reducing the effects of heat. Perfect for increasing comfort and reducing the effects
of heat stress during extended summertime operations.
Model-Battery Powered Fans
18”” PPV
V, 718b & 16”” Smoker Ejector
orr, P164b
MODEL#
POWER
PO
WER SOURCE
SOURCE
H.P
H.P..
718b
P164b
Batter y.24VDC
Batter y.24VDC
1
1
HEIGHT ,WID
,WIDTH,DEPTH
TH,DEPTH
21.75” x 22.50” x 18.75”
19.50” x 18.75” x 13.00”
W
WT.
T.
C.F
C.F.M.
.M.
68#
35#
11,140
3200
The 718b combines fast, no generator set-up and high airflow with a zero emission airstream.
P164b fans will run up to 60 minutes on a single batpac28 for your smoke ejection needs.
Nano Pac - 15B & 25B
MODEL#
POWER
PO
WER SOUR
SOURCE
CE
HEIGHT
HEIGHT,, WID
WIDTH,
TH, DEPTH
W
WT.
T.
CFMs
NanoPac
Batter y 24VDC
11.50” x 10.75” x 16.00”
22#
1037
Model 15B = 15’ Ducting
Model 25B = 25’ Ducting
Nano Pac is a perfect cordless operation for confined space uses remote from other sources of power
or when airflow is needed prior to generator setup.
9
57
MICMAC FIRE & SAFETY SOURCE | PRODUCT CATALOGUE
FANS
Model # (HXG) High Expansion Foam Generator
ng or new Super Vaac Smokke Eje
The HXG accessory adapts to any existing
Ejector or PPV fan.
The HXG delivers a large supply of High Expansion foam and other types of foam for
confined spaces where Fiirefighting Personnel safety is an issue: HAZMA
AT, basements, ship engines rooms, cargo holding areas and aircraft.
ne educator
d
r, metall shroud
h d andd foam expansion netIncludes 30 GPM inline
ting, can produce a finished foam expansion rate from 200:1 to 1000:1.
Other Flow rates are available upon request.
When orrdering
d
specify PP
PV or Smokke Ejector Model #HXG.
Model# Mountain Mister Attaches to Grill of Any Fan
The Mountain Mister converts
co
The
any fan into a cooling, rehab fan by
e
easily
attaching to the outlet
ou
guard. Water
a usage is on
only 3 gallons
per hour and can be supplied
supp
per
via a garden hose, or from an auxilary
lline
ine from your pump pan
panel. Saves money and space, while reducing
t effects that heat stress has on your ability to effectively handle
the
e
emergency
situations. The Mountian Mister has also been used very
effectively
on medical standby prevent heat stress
effectively to help departments
depar
situations
situations during large, public
p
gatherings during summer months.
Model # Exhaust Hose Extension & Exhaust Glove Heat Shield
NEW
The Superr Vac
a Exhaust Extension has been
b
specifically designed to get a majority
of the exhaust emissions from the gasoline engine away from the intake of a PPV
fan by taking the emissions out of the airstream. The Swivel provides a positive
connection that is easily made. NEW! Optional Exhaust Glove Heat Shield slips
over the Exhaust Extension Hose and protects department personnel from
Hot Metal hose burns.
Model # Handle
le Light
L Kit
The Light Kit that can turn any electric PPV into a 350 Waatt Li
Light, it attaches
easi
easily to any existing electric Super
er Vaac PPV
V. Saves manpower ffrom setting up
paarate lighting tripods. Folds
o down
do with handle for easy storage.
May
ay change height dimension of some models.
Model # Quic
u kSillveer Billet Aluminum LED Holder
Model #PPV Running Board Mounts
The QuickSilver Billet Aluminum LED holder allows you to
position a small powerful LED light source on your gas or electric
PPV fan. Quick and easy to install, it protects the Streamlight
LED unit while allowing easy adjustment and on/off capabilities.
These mounts provide a secure hold for the
protection of your equipment and personnel.
Please specify fan model number when orrdering
d g.
sales@mmfss.ca
58
MICMAC FIRE & SAFETY SOURCE | PRODUCT CATALOGUE
FANS
Model # Spiral Duct
MODEL # DIAMETER LENGTH
LENGTH
MODEL # DIAMETER LENGTH
LENGTH
MODEL # DIAMETER LENGTH
LENGTH
These sizes are available with an adapter (ready to be connected to the fan) or without adapter to be used to go beyond the first length of Duct and Fan.
12 x 20 ADwBag
16 x 20 ADwBag
20 x 20 ADwBag
12”
16”
20”
20 Ft
20 Ft.
20 Ft.
24 x 20 ADwBag
12 x 20 BC1wBag
16 x 20 BC1wBag
24”
16”
12”
20 Ft
20 Ft.
20 Ft.
20 x 20 BC1wBag
24 x 20 BC1wBag
20”
24”
20 Ft
20 Ft
This is the highest quality duct made with heavy duty wear strips complete with storage bag and ideal
for moving large quantities of air into hard to reach places. Available with an adapter as shown (AD) for
negative pressure. Extension pieces also available without adapter (BC1) for positive pressure.
Model # The Door Bar
Our Door Bar allows
ows you to hang a Super Vac
a with hangers, in any doorway at the
height you choose. It weighs only thirteen pounds, it’s extremely easy to install,
and it releases instantly
nstantly with a handy triggerr. Extension bar comes standard.
Model # The Hanger
Photo shown with Door Bar and Hanger combinations.
This hanger allows
ws you to put your Super Vac
a almost
alm anywhere;
on doors, ladders, windows, casements, archways, etc. Used in conjunction
with the Door Bar
arr, they permit placing at any height.
Model # Translucent “L” Duct
MODEL #
LD 12-3x8
LD 16-3x8
LD Special
DIAMETER
12”
16”
Any
HORIZONTAL
HORIZONTTAL
A LENGTH
LENGTH
3f t.
3f t.
Max 25 f t.
VER
VERTICAL
TICAL LEN
LENGTH
GTH
8f t.
8f t.
Max 20 f t.
The “L
L” Duct is an extremely useful duct that is held open by air pressure from the
fan. It folds up to take very little space when not in use. Once deployed, workers and
equipment can pass by easily in cramped spaces by simply collapsing the duct. Light
is able to pass through the reinforced translucent vinyl. “L
L”-Duct may only be used on
discharge side of fan.
Model # Fire Resistant Duct
MODEL #
LFR 8 - 3 x 8
DIAMETER
HORIZONTAL
HORIZONTTAL
A LENGTH
LENGTH
8”
3f t.
VER
TICAL LEN
GTH
VERTICAL
LENGTH
8f t.
L” Duct above, with
w the added advantage of being constructed
The LFR Duct iss similar to the “L
of a high quality fire retardant material. It allows workkers
e and equipment to pass by
b easily in tig
spaces by simply collapsing the duct. Once something has passed through, the duct expands ba
to full air capacity
tyy. The LFR may only be used on the discharge side of the fan.
Model # Manhole Adapter
p
FAN
FAN
A SIZE
MANHOLE
MODEL #
MA 12-24
12”
24”
MA 12-30
12”
30”
MA 16-24
16”
24”
MA 16-30
16”
30”
These rugged, aluminum adapters sit in manhole rings
to provide a stable mounting surface for the fans listed.
Note: Not for use if the manhole is the only means of egress.
59
MICMAC FIRE & SAFETY SOURCE | PRODUCT CATALOGUE
FANS
AACCCCESSORIES
Model # Heat Pac 25
Temp
e Comffoort during Frigid Rescues
MODEL#
SSTART
TAART<W
<WATTS>
ATTTSS>R
RUN
UN REQUIREMENT
REQUIREMENTSS HEIGHT,
HEIGHT, WIDTH,
WIDTH, DEPTH WT.
WT.
HeatPac 25 2000
700
2 lbs/hour,
Propane
15.25” x 33.00” x 13.50”
OUTPUT
50# 80°of Teemp Rise
@ 500 CFM
The HeatP
Paac will
w provide over 70,000 BTUs of heat for over 10 hours when connected to a
standard propane tank. This can heat air at a temperature rise of 80° over ambient and a flow
of 500 cfm. Perfect for the department that wants to provide their customers with the utmost in
comfort during difficult situations.
Model # Rapid Tent
en
e
Pops Up Fast
st foor Easy Set Up
The Rapid Teent provides a spacious 100 square feet of unobstructed floor space with over 7 feet
of headroom, yet can be deployed in under one minute. These units can be combined to double
the floor space and come standard with a rear door. Peerfect for Haz-Mat or Dive Teams
e
in northern
latitudes, and to provide quick shelter for Command Staff during an extended incident.
Model # Tilt Frame
me 12”” & 16”” Smoke Ejectors
Model # Smoke Ejector Running Board Mounts
This bracket easily retrofits onto an existing 12” or 16”
Super Vac
a smoke ejectorr. It allows for quick setup and
the tilting of the smoke ejector in any direction.
Points
o
airfl where you want it.
airflow
Please specify 12”or16” when orrdering.
dering
d
These mounts allow you to carry a Smoke Ejector on
the running board of your vehicle, for fast removal at
the scene. They provide a secure,positive hold for the
protection of equipment and personnel.
Model # Saddle Bracket Door Hanger used with Leg Brackets Stack 2 or 3 Smoke Ejectors
Model # Leg Brackets
A door hanger for a 16” Smoke Ejector Stack 3 fans
by connecting 2 fans with 2 Saddle backets and
1 set of Leg Brackets to increase CFM airflow
w.
The leg brackkeets allo
allow the tilting
and stacking of 2 or 3 16” Smoke Ejectors.
Tw
wo made of cast
ca aluminum
Model # ( WB) Brackets
Hose Storage
By using WB Brack
rackkeets with black pipe and 2 X 6s for stringers,
you can make storage racks for hose and tires.
Maximum 5 ft. between WB brackets.
Modell: WB-Small
all for 1-1//2”P
Pipe
i WB-L arge for 2” Pipe.
ip
i
sales@mmfss.ca
60
Protect the new Super Vac
a with a vinyl
v
Fan
a Coverr.
Available in Red or Yellow
e
vinyl. When
W
ordering,
please
ase specify the Super Vac
a Model # and cover colorr.
Model # Fan Coveers
MICMAC FIRE & SAFETY SOURCE | PRODUCT CATALOGUE
FANS
ALLEGRO
RAL-9503
Heavy Duty Explosion-Proof Blower
Electric, explosion-proof motor is UL/CSA listed. Single-phase motor includes NEMA
rated 115V plug for use with explosion-proof socket (included). ABS housing provides
non-sparking safety. Meets Class 1, Div. 1 and 2, Group D and Class 2, Div. 1 and 2,
Groups F and G hazardous requirements. Up to 1570 CFM. Weight: 78 lbs.
ALLEGRO
RAL-9512
Economy Lightweight Blower
Is the economy version of the Standard Blower, this lightweight blower comes in at
only 34 lbs. It has a tough metal base and durable ABS housing, and works great with
generators. Up to 1066 CFM.
ALLEGRO
RAL-9506
DC Axial Blower
Is perfect for locations where electricity is not available, this 8" DC Axial Blower may
be operated off a truck battery. It features a 12 volt DC electric motor with thermal
protected, single speed performance. Extremely lightweight and portable, it includes a
15’ cord with alligator clips. Up to 1150 CFM. Weight: 18 lbs.
ALLEGRO
RAL-9513-05
AC Axial Explosion Proof Blower
Is UL/CSA listed. Single phase motor includes NEMA rated 115V plug for use with
explosion-proof socket (included). It offers tough steel construction and meets Class
1, Div. 1 and 2, Groups C and D and Class 2, Div. 1 and 2, Groups E, F and G
hazardous requirements. Up to 890 CFM. Weight: 20 lbs.
ALLEGRO
RAL-9514
AC Axial Blower with Canister
With 15’ of ducting. Engineered for convenience, this 8" axial blower is an all-in-one
ventilation system. The design allows ducting to collapse into a built-in canister for
easy storage. The unit can also be stored vertically to use a minimum amount of
space. Includes blower, built-in storage canister and 15 or 25 feet of ducting. CSA
Approved. Up to 1275 CFM. Weight: 36 lbs. Also available with DC Axial Blower.
61
MICMAC FIRE & SAFETY SOURCE | PRODUCT CATALOGUE
FANS
ALLEGRO
RAL-9534
AC Com-Pax-ial Blower
Weighs 13% less than the 9513. This blower features a venturi inlet to increase cfm.
Designed with tough steel construction, rubber feet, handle and durable grill.
Complete with AC or DC electric motors. Blower sold separately or with quick-connect
15’ or 25’ ducting canister. Up to 778 CFM.
ALLEGRO
RAL-9513-50
Heater
Is designed for use with 9513 Axial Blower only. High output propane heater features
solid state ignition, flame indication light and flow control.
ALLEGRO
RAL-9520-06
Axial Ventilation Systems
Are easy to order, easy to use complete ventilation systems including all the mostasked-for equipment you need for your confined space site. The systems include a
choice of Allegro’s most popular blowers, six feet and fifteen feet of ducting with a
storage bag, a Saddle Vent®, a 90° Elbow, and a Universal Mount. The Axial Blower
Systems offer lightweight portability with the highest output available from axial-style
blowers.
ALLEGRO
RAL-9520-12
Centrifugal Blower Systems
Include all the most-asked-for equipment you need for your confined space site. The
systems include a choice of Allegro’s most popular blowers, six feet and fifteen feet
of ducting with a storage bag, a Saddle Vent®, a 90° Elbow, and a Universal Mount.
The Centrifugal Blower Systems offer lightweight portability with the highest output
available.
ALLEGRO
RAL-9510-01
Universal Mount
Works with the manhole cover to hold a Saddle Vent®in place. Rugged metal
construction includes a hook to hold the Saddle Vent®.
sales@mmfss.ca
62
MICMAC FIRE & SAFETY SOURCE | PRODUCT CATALOGUE
FANS
RAL-9510-9511
ALLEGRO
Saddle Vent®
Allows workers easy access in and out
of confined spaces while only taking up
a minimum amount of space. Ducting
can be attached to the top and bottom
of the Saddle Vent®which comes in a
tank version or manhole style.
ALLEGRO
RAL-9510-90
Elbow
For Saddle Vent®is 90° which allows ducting to adapt to a Saddle Vent®with
minimal air flow restriction.
RAL-9500-01
ALLEGRO
Duct To Duct
Connector
Allows safe
connection of
additional ducting for
remote locations,
this connector is
constructed of
galvanized steel with
a raised lip to hold
ducting in place.
RAL-9540
ALLEGRO
Ground Fault
Interrupter
Is used for safety
against electric shock.
2 foot 2-1/2" long
cord with switch.
63