WESLO
0"10 MPH _ 2.0 HP _ AUTO INCLINE
Model No. WLTLg5541
Serial No.
Serial Number
Decal -7
/
QUESTIONS?
As a manufacturer,
we are
committed to providing you
complete customer satisfaction. If you have questions,
or find there are missing or
damaged parts, we will
guarantee you complete
satisfaction through direct
assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL
DIRECT TO OUR TOLL-FREE
CUSTOMER
HOT LINE.
The trained technicians on
our Customer Hot Line will
provide immediate assistance, free of charge to you.
CUSTOMER
HOT LINE:
1-800-999-3756
Mon.-Fri.,
6 a.m.-6 p.m. MST
_CAUTION'.
Read all precautions
and
instructions
in this manual
carefully before using this
equipment.
Save this manual
for future reference.
OWNER'S MANUAL
t
LIMITED WARRANTY
!
ICON Health & Fitness, Inc. ("ICON"), warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of ninety (90) days from
the date of purchase. This warranty extends only to the original purchaser. ICON's obligation
under this warranty is limited to replacing or repairing, at ICON's option, the product at one of its
authorized service centers. All products for which warranty claim is made must be received by
ICON at one of its authorized service centers with all freight and other transportation
charges prepaid, accompanied
by sufficient proof of purchase. All returns must be pre-authorized
by ICON.
This warranty does not extend to any product or damage to a product caused by or attributable to
freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON
authorized service center or for products used for commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by ICON.
ICON IS NOT RESPONSIBLE
OR LIABLE FOR INDIRECT, SPECIAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE
OF
THE PRODUCT
OR OTHER DAMAGES WITH RESPECT TO ANY ECONOMIC
LOSS, LOSS
OF PROPERTY,
LOSS OF REVENUES
OR PROFITS,
LOSS OF ENJOYMENT
OR USE,
COSTS OF REMOVAL, INSTALLATION OR OTHER CONSEQUENTIAL
DAMAGES OF WHATSOEVER NATURE. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF
INCIDENTAL
OR CONSEQUENTIAL
DAMAGES. ACCORDINGLY,
THE ABOVE LIMITATION
MAY NOT APPLY TO YOU.
THE WARRANTY
EXTENDED
HEREUNDER
IS IN LIEU OF ANY AND ALL OTHER WARRANTIES AND ANY IMPLIED WARRANTIES
OF MERCHANTABILITY
OR FITNESS FOR A
PARTICULAR
PURPOSE IS LIMITED IN ITS SCOPE AND DURATION TO THE TERMS SET
FORTH HEREIN. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY
LASTS. ACCORDINGLY, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights. You may also have other rights which vary from state
to state.
ICON HEALTH & FITNESS,
2
INC., 1500 S. 1000 W., LOGAN
UT 84321-9813
WESLO
0-10 MPH _ 2.0 HP _ AUTO INCLINE
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS
.........................................................
BEFORE YOU BEGIN ...............................................................
ASSEMBLY
.......................................................................
OPERATION AND ADJUSTMENT
.....................................................
TROUBLE-SHOOTING
AND STORAGE
...............................................
CONDITIONING
GUIDELINES
.......................................................
PART LIST .......................................................................
EXPLODED DRAWING
.............
. ...............................................
ORDERING REPLACEMENT
PARTS ..........................................
4
5
6
7
10
12
14
15
Back Cover
_/_ WARNING:
Before beginning this or any exercise program, consult your physician.
This is especially Important for persons over the age of 35 or persons with pre-existing health
problems. Read all instructions before using. ICON assumes no responsibility for personal
injury or property damage sustained by or through the use of this product.
3
IMPORTANT
PRECAUTIONS
WARNING:
the following
.
.
To redUce the risk of burns, fire, electric
important
precautions
and information
shock or injury to persons,
before operating
read
the treadmill.
Position the treadmill on a level surface, with at least 8 feet of clearance behind the treadmill. Do not place the treadmill near water, outdoors or on a surface that blocks any air
opening. Do not operate where aerosol products are used or where oxygen is being administered.
When connecting
the power cord (see HOW TO PLUG IN THE POWER CORD on page 7),
plug the power cord directly into a grounded circuit capable of carrying 12 or more amps.
No other appliances should be on the same circuit. Keep the power cord away from heated
surfaces. If an extension cord is needed, use only a 14-gauge
feet or less in length with a three-wire conductor.
general-purpose
cord of five
3. Never move the walking belt while the power is turned off. Do not operate the treadmill if the
power cord or plug is damaged, or if the treadmill is not working properly. (See the BEFORE
YOU BEGIN on page 5 if the treadmill is not working properly.)
4. The roller guards must be 1/8 inch from the rear roller. Turn the power off and adjust the
roller guards, if necessary.
.
Wear appropriate
exercise attire when using the treadmill. Do not wear loose clothing that
could become caught in the treadmill. Always wear running shoes. Never use the treadmill
with bare feet, wearing only stockings or in sandals. Athletic support clothes are recommended for both men and women.
.
Never allow more than one person on the treadmill
only by persons weighing 250 pounds or less.
.
Never start the treadmill while you are standing
handrails when exercising on the treadmill.
at a time. The treadmill
on the walking
belt. Always
should
be used
h01d the
8. Keep small children away from the treadmill at all times. Never leave the treadmill unattended while it is running. Always remove the safety key when the treadmill is not in use.
9. Never drop or Insert any object
10. To reduce the possibility
longer than 1 hour.
11. The treadmill
speed.
is capable
12. Use the treadmill
into any opening.
of overheating,
of high speeds.
only as described
Adjust
the treadmill
continuously
for
the speed slowly to avoid sudden jumps
in
in this manual.
13. Always unplug the power cord before
dures described in this manual. Never
an authorized service representative.
should be performed by an authorized
4
do not operate
performing the maintenance
and adjustment proceremove the motor hood unless instructed to do so by
Servicing other than the procedures
in this manual
service representative
only.
SAVE THESE INSTRUCTIONS
BEFORE
YOU
Thank you for selecting
BEGIN
the WESLO
CADENCE ® 955 treadmill.
The CADENCE
advanced technology with innovative design to let you enjoy an excellent
cise in the convenience and privacy of your home.
955 treadmill
blends
form of cardiovascular
exer-
For your benefit, read this manual carefully before using the treadmill. If you have additional
questions, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please note the
product model number and serial number before calling. The model number of the treadmill is
WLTL95541. The serial number can be found on a decal attached to the treadmill (see the front cover
of this manual for the location).
Before reading further,
labeled.
please review the drawing
below and familiarize
yourself
with the parts that are
Control
Knob
Console_
Safety
Handrails
Key/Clip
Control
Handrail
Uprights
Lever
FRONT
Motor Hood
Circuit
Walking
Breaker
Belt
Roller Guards
Foot Rail
BACK
RIGHT SIDE
Rear Roller
Adjustment
Bolts
Cushion
Spring Foot
/
Power Cord
ASSEMBLY
Set the treadmill in a cleared area and remove
materials until assembly is completed. TOOLS
wrench
1,
_
all packing materials. Do not dispose of the packing
REQUIRED
FOR ASSEMBLY:
An adjustable
(not Included).
Raise the Left Upright (not shown)
and Right Upright
(21)
to the vertical position. Insert an Upright Bolt (37) with an
Upright Washer (39) through the plate on the lower end of
the Right Upright (21) and tighten the Bolt into the Frame
(46). Tighten the Upright Bolt that is already in the plate.
Make sure the Upright Caps (73) are on the Left and Right
Uprights.
2. Insert an Upright Bolt (37) with an Upright Washer (39)
through the plate on the lower end of the Left Upright (75)
and tighten the Bolt into the Frame (46). Tighten the
Upright Bolt that is already in the plate.
3. Remove the paper backing from the Wrench Clip (61).
Press the Wrench Clip onto the Right Endcap (57) in the
indicated location. Press the Allen Wrench (59) into the
Wrench Clip.
Make sure that all parts are tightened before using the treadmill. Note: To protect the floor, a covering should be
placed under the treadmill.
6
OPERATION AND ADJUSTMENT
MAINTENANCE-FREE
WALKING
BELT
Your treadmill features a maintenance-free
walking belt coated with PERFORMANT
LUBE TM, a highperformance lubricant. During the first few hours of use, it is normal for a small amount of white powder
to appear on the foot rails and the walking platform. The white powder is high-performance
lubricant
from the walking belt.
IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking
platform. They will deteriorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER
CORD
This product must be grounded. If it should malfunction or break down, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This product is equipped with a
cord having an equipment-grounding
appropriate
outlet that is properly
and ordinances.
DANGER:
conductor and a grounding plug. Plug the power cord into an
installed
and grounded in accordance
with all local codes
Improper connection
of the equipment-grounding
conductor
can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the
product is properly grounded. Do not modify the plug provided with the product--if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug
illustrated in Drawing 1. A temporary adapter that looks like the adapter illustrated in Drawing 2 may be
used to connect this plug to a 2-pole receptacle as shown in Drawing 2 if a properly grounded outlet is
not available. The temporary adapter should be used only until a properly grounded outlet (Drawing 1)
can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from
the adapter must be connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place by a metal screw.
Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified
determine if the outlet box cover is grounded before using an adapter.
Grounded
Outlet Box
Grounding
electrician
to
2
Outlet Box
Plug
Adapter
Grounding
II
Pin
Grounding
II
Plug
II
II
nding Pin
Grounded Outlet
Lug
Metal Screw
7
DIAGRAM
OF THE CONSOLE
Battery Cover
I
m
m
i
ACOLISMAR-[,,o,_..,o..,
.,,..,, ,,o.,,o.
eed.. Control
SR[ED
Motivational
Fitness Monitor:
{_'Lo,,.,
1
I
J
t
1
Knob
SPEEDCONTROL
Power Indicator
HOW TO INSTALL
"_Power
Switch
!
I
BATTERIES
Battery.Cover
\
The motivational
fitness monitor requires two "AA" batteries
(not included); alkaline batteries are recommended.
Slide the
battery cover open. Remove the battery clip from the console. Find the markings inside the battery clip showing which
direction the batteries should be turned. Press the batteries
into the battery clip. Replace the battery clip in the console
and close the battery cover. Note: If there is a sheet of protective plastic on the face of the console,
peel it off
before operating
the console.
HOW TO TURN
...
Battery
Clip
.'''..
ON THE POWER
Step onto the foot rails of the treadmill. Locate the clip attached
the clip onto the waistband of your clothing.
CAUTION:
the clip while operating
Do not stand on the walking
the treadmill.
by acord
belt while turning
to the safety key, and slide
on the power. Always wear
Insert the safety key into the power switch. The power indicator will light. The four displays of the motivational fitness monitor will not appear until the ON/CLEAR button is pressed, or the walking belt
begins to move (see HOW TO CHANGE THE SPEED below). Note: If batteries were just installed, the
four displays will already appear.
HOW TO CHANGE
THE SPEED
To start the walking belt, first turn the speed control knob to "RESET."
wise until the walking belt begins to move at slow speed.
Ak CAUTION:
After the knob is turned,
begins to move. Adjust
mill.
8
the speed slowly
Then, turn the knob slowly clock-
there will be a pause before the walking
until you are familiar
with the operation
belt
of the tread-
Carefully step ontothe walking belt and begin exercising. Change the speed of the walking belt as
desired by turning the speed control knob. To stop the walking belt, turn the knob to "RESET."
HOW TO CHANGE
THE INCLINE
To vary the intensity of your exercise, the incline of the
treadmill can be adjusted using the lever on the right
upright.
Do not adjust
the Incline
while you are walking
ning on the treadmill. To decrease
toward the front of the foot rails,
the lever. When the desired incline
lever. To increase the incline, stand
Incline
Control
or run-
Lever
the incline, stand
lean forward and pull up
is reached, release the
toward the back of
the foot rails and pull up the lever. When the desired
incline is reached, release the lever.
Note: It may be helpful to step off the treadmill, pull up the
lever, and lift on the handrail in order to increase the incline
of the treadmill.
MOTIVATIONAL
FITNESS
MONITOR
The four displays of the motivational fitness
monitor provide continuous exercise feedback.
plays can be reset by pressing the ON/CLEAR
button. The four displays are described below:
TIME--This
display shows the elapsed time. Note: When the walking belt is stopped,
will go into a pause mode after a few seconds.
CALORIE--This
SPEED--This
display shows the approximate
The dis-
the TIME display
number of nutritional Calories you have burned.
display shows the current speed of the walking belt, in miles per hour.
DISTANCE--This
display shows the total distance that you have walked or run, in miles.
Note: If the walking belt is stopped and remains stationary for about five minutes, the four displays of
the motivational fitness monitor will be reset and will darken, although the power will remain on. The
four displays will appear again when the ON/CLEAR
HOW TO TURN
button is pressed, or the walking belt is restarted.
OFF THE POWER
To turn off the power, remove the safety key from the console. The power indicator will darken. Store
the safety key in a secure location.
TROUBLE-SHOOTING
AND STORAGE
Most treadmill problems can be solved by following the simple steps below. Find the symptom
that applies to your treadmill and follow the steps listed. If further assistance is needed, please
call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6
a.m. until 6 p.m. Mountain Time (excluding holidays).
1. SYMPTOM:
THE POWER
DOES NOT TURN ON
a. Make sure that the power cord is plugged into a properly grounded outlet. (See HOW TO PLUG
IN THE POWER CORD on page 7.) If an extension cord is needed, use only a 14-gauge generalpurpose cord of five feet or less in length.
b. After the power cord has been plugged in, make sure that the safety key is fully inserted into the
console. Various indicators on the console should light. (See HOW TO TURN ON THE POWER
on page 8.)
C.
Check
the circuit
breaker
located on the treadmill
frame
near the power cord. If the switch protrudes as shown,
the circuit breaker has tripped. To reset the circuit
breaker, wait for five minutes and then press the switch
back in.
Reset
Tripped
2. SYMPTOM:
THE POWER
TURNS
OFF DURING
USE
a. Check the circuit breaker located on the treadmill frame near the power cord. If the circuit breaker
has tripped, the switch will protrude. (See the drawing above.) To reset the circuit breaker, wait for
five minutes and then press the switch back in.
b. Make sure that the power cord is plugged
c. Remove the safety key from the console.
indicators on the console should light.
3. SYMPTOM:
THE WALKING
a. If an extension
length.
b.
BELT SLOWS
cord is needed,
in.
Reinsert
WHEN
the safety key fully into the console.
WALKED
use only a 14-gauge
Various
ON
general-purpose
cord of five feet or less in
If the walking belt is overtightened, treadmill performance
may decrease and the walking belt may be permanently
damaged.
Remove the safety key and UNPLUG THE
POWER CORD. Using the allen wrench, turn both rear
roller adjustment
bolts counterclockwise,
1/4 of a turn.
When the walking belt is properly tightened, you should
be able to lift each side of the walking belt 3-4 inches off
the walking platform. The center of the walking belt should
just touch the walking platform. Be careful to keep the
walking belt centered. Plug in the power cord, insert the
safety key and run the treadmill for a few minutes. Repeat
until the walking belt is properly tightened.
10
Rear Roller Adjustment
c. If the walking belt still slows when walked on, please call our Customer
Service
Bolts
Department.
4. SYMPTOM:
a.
THE WALKING
BELT IS OFF-CENTER
OR SLIPS WHEN WALKED
If the walking belt has shifted to the left, first remove the
safety key and UNPLUG THE POWER CORD. Using the
allen wrench, turn the left rear roller adjustment bolt clock-
ON
a
wise, and the right bolt counterclockwise,
1/4 of a turn
each. Be careful not to overtighten the walking belt. Plug
in the power cord, insert the safety key and run the treadmill for a few minutes. Repeat until the walking belt is centered.
b.
If the walking belt has shifted to the right, first remove the
safety key and UNPLUG THE POWER CORD. Using the
allen wrench, turn the left rear roller adjustment bolt counterclockwise,
and the right bolt clockwise, 1/4 of a turn
each. Be careful not to overtighten the walking belt. Plug
in the power cord, insert the safety key and run the treadmill for a few minutes. Repeat until the walking belt is centered.
C.
If the walking belt slips when walked on, first remove the
safety key and UNPLUG THE POWER CORD. Using the
allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking
belt 3-4 inches off the walking platform. The center of the
walking belt should just touch the walking platform. Be
careful to keep the walking belt centered. Plug in the power
cord, insert the safety key and run the treadmill for a few
minutes. Repeat until the walking belt is properly tightened.
5. SYMPTOM:
THE MOTIVATIONAL
FITNESS
MONITOR
DOES NOT FUNCTION
a. Check the batteries in the console. (See HOW TO INSTALL
lems are the result of drained batteries.
BATTERIES
PROPERLY
on page 8.) Most prob-
STORAGE
Unplug the power cord when the treadmill is not in use.
Remove one bolt and washer from the lower ends of the left
and right uprights. Loosen the other bolt on each side.
Carefully lay the console on the treadmill. Keep the bolts and
washers in a secure location.
It is recommended
that the treadmill be covered during extended periods of storage.
11
CONDITIONING
GUIDELINES
The following guidelines will help you to plan your exercise
and adequate rest are essential for successful results.
WARNING:
This is especially
health problems.
EXERCISE
Before
Important
beginning
program.
this or any exercise
for individuals
Remember
program,
that proper nutrition
consult
over the age of 35 or individuals
your physician.
with pre-existing
INTENSITY
To maximize the benefits of exercising,
it is important to exercise with the proper intensity. The proper
intensity can be found by using your heart rate as a guide. For effective aerobic exercise, your heart
rate should be maintained at a level between 70% and 85% of your maximum heart rate as you exercise. This is known as your training zone. You can find your training zone in the table below.
Training zones are listed for both unconditioned
and conditioned persons according to age.
AGE
UNCONDITIONED
TRAINING ZONE
(BEATS/MIN)
CONDITIONED
TRAINING
ZONE
(BEATS/MIN)
AGE
UNCONDITIONED
TRAINING
ZONE
(BEATS/MIN)
CONDITIONED
TRAINING ZONE
(BEATS/MIN)
20
138-167
133-162
55
127-155
122-149
25
136-166
132-160
60
126-153
121-147
30
135-164
130-158
65
125-151
119-145
35
134-162
129-156
70
123-150
118-144
40
132-161
127-155
75
122-147
117-142
45
131-159
125-153
80
120-146
115-140
50
129-156
124-150
85
118-144
114-139
During the first few months of your exercise program, keep your
heart rate near the low end of your training zone as you exercise.
After a few months, your heart rate can be increased gradually
until it is near the middle of your training zone as you exercise. To
measure your heart rate, stop exercising and place two fingers on
your wrist. Take a six-second heartbeat count, and multiply the
result by 10 to find your heart rate. For example, if your six-second
heartbeat count is 14, your heart rate is 140 beats per minute. (A
six-second count is used because your heart rate will drop rapidly
when you stop exercising.) Adjust the intensity of your exercise
until your heart rate is at the proper level.
WORKOUT
GUIDELINES
Each workout should consist of three basic parts: a warm-up, 20 to 30 minutes of training zone exercise, and a cool-down. Warming up prepares the body for exercise by increasing circulation, delivering
more oxygen to the muscles and raising the body temperature.
Begin each workout with 5 to 10 minutes of stretching and light exercise to warm up. Then, increase the intensity of your exercise to raise
your heart rate to your training zone for 20 to 30 minutes. Breathe regularly and deeply as you exercise--never
hold your breath. Finish each workout with 5 to 10 minutes of stretching to cool down. This
will increase the flexibility of the muscles, and reduce soreness and other post-exercise
problems.
12
To maintain or improve your condition, complete three workouts each week, with at least one day of
rest between workouts. After a few months of regular exercise, you may complete up to five workouts
each week, if desired. The key to success is CONSISTENCY.
SUGGESTED
The following
STRETCHES
stretches can provide a good warm-up or cool-down.
shown in the drawings below. Move slowly as you stretch--never
TOETOUCH
bounce.
STRETCH
Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to
relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times.
Stretches:
Correct form for each stretch is
Hamstrings,
HAMSTRING
\
back of knees and back.
STRETCH
Sit with one leg extended. Bring the sole of the opposite
foot toward you and rest it against the inner thigh of your
extended leg. Reach toward your toes as far as possible.
Hold for 15 counts, then relax. Repeat 3 times for both
legs.
Stretches:
Hamstrings,
CALF/ACHILLES
lower back and groin.
STRETCH
With one leg in front of the other, reach forward and place
your hands against a wall. Keep your back leg straight
and your back foot flat on the floor. Bend your front leg,
lean forward and move your hips toward the wall. Hold for
15 counts, then relax. Repeat 3 times for both legs. To
cause further stretching of the achilles tendons, bend
your back leg as well.
Stretches:
Calves, achilles
QUADRICEPS
tendons
and ankles.
STRETCH
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as
close to your buttocks as possible. Hold for 15 counts,
then relax. Repeat 3 times for both legs.
Stretches:
Quadriceps
INNER THIGH
and hip muscles.
STRETCH
Sit with the soles of your feet together and your knees
outward. Pull your feet toward your groin area as far as
possible. Hold for 15 counts, then relax. Repeat 3 times.
Stretches:
Quadriceps
and hip muscles.
13
PART LIST---Model
14
Key
No.
Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
No. WLTL95541
R695A
Description
Key
No.
Qty.
1
6
2
1
1
4
1
1
1
1
1
1
1
1
1
1
4
Left Handrail
Handrail/Upright Cage Nut
Console Bolt
Safety Key/Clip
Console
Console Screw
Console Plate
Speed Control Knob
Incline Control Cable
Shock Release
E-Clip
Shock Bracket
Shock Spacer
Incline Shock
Cotter Pin
Right Handrail
Handrail Bolt
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
2
1
2
1
1
2
1
1
1
2
1
-1
2
1
2
6
1
Motor Bolt
Controller
Motor Swivel Bolt
Choke
Motor
Motor Nut
Pulley/Flywheel/Fan
Hood Rest Pad
Right Endcap
Rear Roller Adjustment Bolt
Allen Wrench
Left Endcap
Wrench Clip
Rear Roller
Roller Guard
Platform Screw
Motor Hood
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
2
1
1
1
2
4
1
1
11
5
1
10
1
2
2
2
9
2
2
4
1
6
1
Plastic Spacer
Shock Pin
Incline Control Lever
Right Upright
Ground Washer
Small Screw
Power Cord
Circuit Breaker
Silver Screw
Hood Anchor
Grommet
Safety Cover Screw
Front Roller Adjustment Bolt
Roller Adjustment Washer
Front Wheel
Incline Leg Nut
Screw
Front Wheel Bolt
Incline Leg Bolt
Upright Bolt
Hood Support Bracket
Upright Washer/Leg Washer
Front Roller Tab
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
1
1
1
1
1
4
7
2
1
1
1
2
1
1
1
1
1
1
1
1
3
4
2
Reed Switch/Lower Sensor Wire
Magnet
Belt
Wire Clip
Tension Spring
Tension Washer/Swivel Washer
Lock Nut
Upright Cap
Incline Leg
Left Upright
Electronics Bracket
Cushion Cover
12" Cable Loom
6" Cable Loom
Ground Wire
Power Switch Wire
Reed Switch Extension Wire
Reed Switch Mounting Bracket
Cable Tie Wrap
Tie Block
4" Cable Tie
8" Cable Tie
Foam Block
41
42
43
44
45
46
47
48
1
1
1
1
2
1
1
1
Safety Cover
Front Roller/Pulley
Walking Platform
Walking Belt
Foot Rail
Frame
J-Bolt
Motor Swivel Shaft
89
90
91
92
93
94
95
#
4
2
1
2
4
3
5
1
Cushion Spring Bolt
Cushion Spring Foot
Belt Guide
Star Washer
Cage Nut
Belt Guide Screw
Mounting Screw
Owner's Manual
Note:
"#" indicates a non-illustrated
back cover for information
part. Specifications
about ordering
replacement
Description
are subject to change
parts.
without notice. See the
EXPLODED DRAWING--Model
No. WLTL95541
R69SA
8
!
10
11
12
¢'/
7
i
73
!
!
!
!
16
I
23
82-.,._
20
66
61 _95
71
i
"/"
1
/"
1
!
!
1
65
37
1
/
83
88
,17
"1"/"
95
24
26
25
23
88
39
42
45
\
43
41
45
44
/
32
31
59
80
58
15
ORDERING
To order replacement
REPLACEMENT
parts, call our Customer
PARTS
Service
Monday through Friday, 6 a.m. until 6 p.m. Mountain
please be prepared to give the following information:
• The MODEL
NUMBER
of the product
• The NAME of the product
• The SERIAL
NUMBER
(WESLO
Department
Time (excluding
• The DESCRIPTION
of the part(s) from page 14 of this manual.
near your telephone
R695A Printed
When ordering
parts,
(see the front cover of this manual).
of the part(s) from page 14 of this manual.
Part No. 123240
holidays).
CADENCE ®955 treadmill).
of the product
place the treadmill
at 1-800-999-3756,
(WLTL95541).
• The KEY NUMBER
If possible,
toll-free
in USA
for easy reference
when calling.
© 1995 ICON Health & Fitness,
Inc.