Amerex Product Brochure - Security Fire Equipment

WHERE TO USE
Amerex manufactures an extensive variety of hand portable and wheeled fire extinguishers, both “compliance”
(code required) and “specialty” types. “Specialty” type extinguishers are intended for use on particular types of hazards, so
careful attention should be made to locating them in close proximity to the specific hazard they are meant to protect. It is
natural for a person to use the extinguisher located nearest to a fire. The most current issue of NFPA-10 should be consulted
for minimum recommended fire extinguisher types, placement and travel distances. Your local Amerex Fire Equipment
Distributor is professionally equipped to help you evaluate and implement these recommendations.
All “Picture Symbols” are detailed below and should be reviewed with all who might be expected to use a fire extinguisher.
Everyone should be familiar with these picture symbols which identify the types of fires on which they may be used. The
International sign system diagonal red slash indicates a potential danger if the extinguisher is used on that particular type
of fire.
TYPES OF FIRES
CLASS A
ORDINARY COMBUSTIBLES:
wood, paper, rubber,
fabrics and many plastics
CLASS B FLAMMABLE LIQUIDS & GASES:
gasoline, oils, paint,
lacquer and tar
CLASS C
FIRES INVOLVING
LIVE ELECTRICAL
EQUIPMENT
TYPES OF EXTINGUISHERS
CLASS A
CLASS A:B
CLASS A:B:C
CLASS A:C
CLASS D
COMBUSTIBLE METALS
OR
COMBUSTIBLE METAL ALLOYS
(NO picture symbol)
CLASS K FIRES IN COOKING APPLIANCES
THAT INVOLVE COMBUSTIBLE
COOKING MEDIA
vegetable or animal oils and fats
CLASS B:C
CLASS D
CLASS A:K
HOW TO USE
All Amerex extinguishers are furnished with a detailed “Owners Manual” containing valuable information.
The manual contains information on the installation, use and maintenance of the extinguisher.
The extinguisher nameplate (label) contains specific information on “HOW TO USE” the particular
extinguisher. The label instructions vary slightly according to type and size. All potential operators
should be totally familiar with the instructions on any extinguisher they might be required to use.
2
ALL AMEREX FIRE EXTINGUISHERS COMPLY WITH THE RECOMMENDATIONS OF THE NATIONAL FIRE
PROTECTION ASSOCIATION AND ARE TESTED AND RATED BY UNDERWRITERS LABORATORIES OR
FM GLOBAL TO ANSI / UL STANDARDS. ALL EXTINGUISHER NAMEPLATES CONTAIN THE NECESSARY
HMIS INFORMATION TO COMPLY WITH NATIONAL AND LOCAL OSHA REQUIREMENTS.
WATER & FOAM
Amerex Corporation
RUGGED
•5 Year Manufacturer’s Warranty
Model
240
•Stored Pressure Design
•Polished Stainless Steel Cylinders
•All Metal Valve Construction
•Exclusive crevice free, butt welded cylinders
•Temperature Range +40°F to 120°F
CLEAN
Model
254
• Leaves no powder residue
USER FRIENDLY
Model
252
250
• Maximum visibility during discharge
• Large Loop Stainless Steel Pull Pin
• Bar Coded and Bi-lingual Labels
AVAILABLE IN A 33 GAL. FFFP Wheeled
extinguisher or stationary unit
Model 240 utilizes the cooling, soaking and penetrating effect of a 45-55 ft. stream of WATER. The 55 sec. discharge time
makes it very effective for inexperienced operators for use on Class A fires.
Model 254 AFFF FOAM unique 6 liter size fills many requirements for a lighter, more compact Class A:B extinguisher.
Easy and effective application with the spray nozzle. Apply to Class B liquid spills to prevent ignition. Ideal for emergency
first response vehicles.
Model 252 FFFP FOAM adds Class B fire fighting capability to the Class A effectiveness of this extinguisher. The Alcohol
Resistant fire fighting agent is effective on fires in a wide variety of Class B materials such as alcohols, polar solvents,
hydrocarbons and combinations such as gasohol. Apply to a non-ignited Class B liquid spill and it will seal the surface
minimizing the chance of serious fire.
Model 250 AFFF FOAM Class A:B extinguisher. Easy and effective application with air aspirated nozzle. Apply to Class
B liquid spills to prevent ignition. Ideal for emergency first response vehicles.
The model 240 may be freeze protected to -40ºF by adding a Model 506 Anti-Freeze charge
AGENT TYPE
DESIGN
MODEL NUMBER
UL RATING
CAPACITY
SHIPPING WT. (LBS.
EMPTY)
HEIGHT (IN.)
WIDTH (IN.)
DEPTH (IN.)
RANGE (INITIAL- FT)
FM APPROVED
DISCHARGE TIME (SEC.)
INCLUDED BRACKET
WATER
HOSE & NOZZLE
240
2A
2.5 GAL
AFFF FOAM
HOSE & SPRAY
NOZZLE
FFFP FOAM
HOSE & AIR
ASPIRATED
NOZZLE
254
250 / 250CG
252
2A:10B
3A:20B
3A:20B
6 LITER
2.5 GAL
2.5 GAL
7.5
7.5
11
11
24.5
9
7
45-55
YES
55
WALL
19
8
7
10-12
24.5
9
7
10-12
YES
55
WALL
24.5
9
7
10-15
30
WALL
55
WALL
Manufactured and Tested to ANSI/UL Standards
Complies with NFPA 10 Standard
ISO-9001 / ISO-14001 Certified
UL LISTED
CONFORMS TO TEST STANDARDS:
WATER: CAN/ULC-S507 - ANSI/UL626 &
CAN/ULC-S508 - ANSI/UL711
FOAM: CAN/ULC-S554 - ANSI/UL8 &
CAN/ULC-S508 - ANSI/UL711
MADE IN U.S.A.
3
WET CHEMICAL
Amerex Corporation
RUGGED
• 5 Year Manufacturer’s Warranty
• Stored Pressure Design
• Polished Stainless Steel Cylinders
• All Stainless Steel Valve Construction
• Exclusive Crevice Free, Butt Welded Cylinder
• Tested on Commercial Deep Fat Fryers to
ANSI / UL 711Test Protocol and Safe to Use on Class C Fires
• Class 2A Rated to Meet Fire Code Occupancy Hazard Requirements
• Temperature Range +40°F to 120°F
B260
USER FRIENDLY
• Factory Charged
• Large Loop Stainless Steel Pull Pin
• Swivel Connection on Hose Allows Nozzle to be Oriented for Proper Use
• Nozzle Grip Design with 45° Angle for Easy “Overhead” Application
• Agent Discharged as a Fine Mist Helps
Prevent Grease Splash and Re-flash While
Cooling the Appliance
• Precise Extinguishing Agent Application
• Bar Coded and Bi-lingual Labels
B262
Coast Guard Approved
B260CG
OPTION
• USCG Approved with Bracket Listed on
UL Label
B262CG
MUST USE 810CG BRACKET
*(Sold Separately)
WET CHEMICAL extinguishers are the best restaurant kitchen appliance hand portable fire extinguishers you can
purchase. Each model has been tested and approved for the Class K listing by UL specifically for restaurant kitchen
hazards. They contain a special potassium acetate based agent. The recent trend to more efficient cooking appliances
and use of vegetable based cooking oils dictates the use of a hand portable fire extinguisher with greater fire fighting
capacity and cooling effect to combat these very hot and difficult fires. Available in two sizes - 6 liter or 2½ gal. - with
attractive stainless steel cylinders and easy to use hose and spray application nozzle. The superior fire fighting capability
of the Wet Chemical agent is placed exactly where you aim it with no chemical residue to clean up. The Models B260
and B262 are the ideal “KITCHEN USE” fire extinguishers. They supplement existing cooking equipment automatic
system protection for an extra margin of safety.
Excellent for use on all cooking appliances including solid fuel charbroilers
4
AGENT TYPE
DESIGN
MODEL NUMBER
UL RATING
CAPACITY
SHIPPING WT. (LBS.)
HEIGHT (IN.)
WIDTH (IN.)
DEPTH (IN.)
RANGE (INITIAL- FT)
FM APPROVED
DISCHARGE TIME (SEC.)
INCLUDED BRACKET
B260
2A:K
6 LITER
22.5
19
9
7
10-12
53
WALL
Complies with NFPA 10 Standard
ISO-9001 and ISO-14001 Certified
WET CHEMICAL
HOSE & SPRAY NOZZLE
B262
B260CG
UL LISTED
B262CG
2A:K
2.5 GAL
33.5
24.5
9
7
10-12
YES
107
WALL
6 LITER
22.5
19
9
7
10-12
53
WALL
2.5 GAL
33.5
24.5
9
7
10-12
YES
107
WALL
CONFORMS TO TEST STANDARDS:
CAN/ULC-S554 - ANSI/UL8 &
CAN/ULC-S508 - ANSI/UL711
MADE IN U.S.A.
WATER MIST
Amerex Corporation
RUGGED
• 5 Year Manufacturer’s Warranty
• Stored Pressure Design
• Stainless Steel Cylinders
• Durable High Gloss Polyester Powder Paint
• All Metal Valve Construction
• Exclusive Crevice Free, Butt Welded Cylinder
• Temperature Range +40°F to 120°F
MRI SAFE
• Nonmagnetic Construction Tested by an
Independent Agency for use in MRI Facilities to 7 Tesla (including wall hanger bracket)
CLEAN
• Non-toxic - Causes no Respiratory Problems
• De-ionized Water Extinguishing Agent
(sold separately)
• Sanitary White Paint Finish (easy to clean)
• No Powder Residue
USER FRIENDLY
• Wand Provides Greatest Operator Safety
• Large Loop Stainless Steel Pull Pin
• Maximum Visibility During Discharge
• No Electrical Conductivity Back to the Operator
• No Thermal or Static Shock
• Minimal Training - Simplest to use
• Most Economical Agent Available
• Bar Coded and Bi-lingual Labels
OPTION
• USCG Approved with Bracket Listed on UL Label
• Available with Polished Stainless Steel Cylinders
B270NM
B272NM
NONMAGNETIC
Tested to ANSI/UL 711
for Class C Listing
WATER MIST is the ultimate extinguisher for Class A fires and where a potential Class C (electrical)
hazard exists. The fine spray from the unique misting nozzle provides safety from electrical shock,
greatly enhances the cooling and soaking characteristics of the agent and reduces scattering of
burning materials. The Amerex Water Mist extinguishers contain de-ionized water (sold separately)
making them the best extinguishers for protection of hospital environments, valuable books and
documents, telecommunication facilities and “clean room” manufacturing facilities. The Amerex Water
Mist extinguishers are easy to use, maintain, and service.
Safe to use in MRI facilities and on energized equipment
AGENT TYPE
DESIGN
MODEL NUMBER
UL RATING
CAPACITY
SHIPPING WT. (LBS. EMPTY)
HEIGHT (IN.)
HEIGHT WITH HOSE AND
WAND INSTALLED (IN.)
WIDTH (IN.)
DEPTH (IN.)
RANGE (INITIAL- FT)
DISCHARGE TIME (SEC.)
INCLUDED BRACKET
DE-IONIZED WATER
HOSE & WAND
B270NM
B272NM
2A:C
2A:C
1.75 GAL
2.5 GAL
7
8
19
24.5
24.5
27.5
11
7
10-12
72
NM WALL
11
7
10-12
80
NM WALL
Manufactured and Tested to ANSI/UL Standards
Complies with NFPA 10 Standard
ISO-9001 / ISO-14001 Certified
UL LISTED
CONFORMS TO TEST STANDARDS:
CAN/ULC-S554 - ANSI/UL8 &
CAN/ULC-S508 - ANSI/UL711
MADE IN U.S.A.
5
HALOTRON™ I
Aluminum Valve
A384T
B385TS
B386T
B394TS
Amerex Corporation
RUGGED
• 5 Year Manufacturer’s Warranty
• Stored Pressure Design
• Dependable Drawn Steel Cylinders
• Durable High Gloss Polyester Powder Paint
• All Metal Valve Construction
• Temperature Range -40°F to 120°F
ENVIRONMENTALLY ACCEPTABLE
• EPA approved “Clean Agent” for Class A, B
and C hazards
• Low GWP (Global Warming Potential)
• Low ODP (Ozone Depletion Potential)
• Short Atmospheric Lifetime
CLEAN
• Leaves No Residue
Brass Valve
397
398
USER FRIENDLY
• Maximum Visibility During Discharge
• Large Loop Pull Pin
• No Electrical Conductivity Back to the
Operator
• No Thermal or Static Shock
• Bar Coded and Bi-lingual Labels
OPTION
• 5 lb., 11 lb. and 15 ½ lb. Extinguishers are USCG Approved with Bracket Listed on
UL Label
Available in Wheeled extinguishers
Halotron™ I clean fire extinguishing agent discharges as a rapidly evaporating liquid, which is non-conductive, non-corrosive, and
leaves behind no residue. Halotron™ I is the clean agent market leader with a history of successful real-world protection of valuable
assets. From model scale aircraft to wide body commercial aircraft, from data centers to pharmaceutical and other industrial plants, the
Halotron™ I agent has been used to extinguish the fire, limit damage and help reduce downtime that can be caused by other agents.
The Halotron™ I clean agent has been determined to be the most environmentally beneficial halocarbon agent on the market today
that meets wide performance standards. The primary raw material in the agent is HCFC-123, which has an outstanding profile of
near-zero ozone depleting potential (0.0098, CFC-11=1.0) and a low global warming potential (77, 100 yr. CO2 time horizon). State
of the art atmospheric modeling completed in 2009 describes the smaller environmental footprint than HFC-based agents available
for portable extinguishers.Ideal applications for these extinguishers include: data centers, laboratories, manufacturing plants, general
office areas, computer rooms, telecommunication facilities, clean rooms, control rooms, warehouses, military electronics, vehicles
including classic autos, boats, engine compartments, aircraft ramps, onboard aircraft and in facilities that service aircraft and any
facility where dry chemical extinguishers could cause unacceptable damage or contamination.
FAA Approved Models Available (See Chart Below)
AGENT TYPE
VALVE TYPE
DESIGN
MODEL NUMBER
UL & ULC RATING
CAPACITY (LBS.)
SHIPPING WT. (LBS.)
HEIGHT (IN.)
WIDTH (IN.)
DEPTH (IN.)
RANGE (INITIAL- FT)
DISCHARGE TIME (SEC.)
FM APPROVED
OPTIONAL CHROME CYLINDER
MINIMUM CONFINED SPACE
REQUIREMENTS (CU. FT.)
6
FAA APPROVED MODEL
INCLUDED BRACKET
HALOTRON™ I
ANODIZED ALUMINUM
NOZZLE
A384T B385TS B386T
B394TS
1B:C
2B:C
5B:C
5B:C
1.4
2.5
5
5.5
3.25
5.25
9.5
10
10
15.5
15.25
15
3.5
6.38
5.75
5.13
2.63
3
4.25
4.25
6-8
6-8
9-15
9-15
9
9
9
9
YES
YES
YES
YES
196
350
700
770
YES
VEHICLE VEHICLE VEHICLE AIRCRAFT
CHROMED BRASS
HOSE & NOZZLE
397
398
1A:10B:C 2A:10B:C
11
15.5
22.5
27.5
21.88
21.88
9.25
9.25
6
6
9-15
12-18
9
14
YES
YES
1540
2170
YES
WALL
YES
WALL
Manufactured and Tested to ANSI/UL Standards
Complies with NFPA 10 Standard
ISO-9001/ ISO-14001 Certified
UL LISTED
CONFORMS TO TEST STANDARDS:
CAN/ULC-S556 - ANSI/UL2129 &
CAN/ULC-S508 - ANSI/UL711
MADE IN U.S.A.
Amerex Corporation
RUGGED
• 1 Year Manufacturer’s Warranty
• Stored Pressure Design
• Dependable Drawn Steel Cylinders
• Durable High Gloss Polyester Powder Paint
• All Metal Valve Construction
• Temperature Range -40°F to 120°F
HALON 1211
Aluminum Valve
A344T
C352TS
C354TS
B355T
CLEAN
• Leaves no residue
• Reclaimed Halon 1211 is Restored to Original
Military Specification
• Uses All Recycled Gas in Accordance With The Montreal Protocol
Brass Valve
B369
B371
361
USER FRIENDLY
• Maximum Visibility During Discharge
• Large Loop Pull Pin
• No Electrical Conductivity Back to the Operator
• No Thermal or Static Shock
• Bar Coded and Bi-lingual Labels
OPTION
• USCG Approved with Bracket Listed on
UL Label (except model A344T)
HALON 1211 is a liquified gas, pressurized with nitrogen, which discharges as a vapor causing
no cold or static shock and no impairment of the operator’s vision. This “CLEAN” agent quickly
penetrates difficult to see and hard to reach areas and leaves no residue. It is recommended for
protection of delicate, sensitive and expensive computers, electrical equipment, tapes and film,
automotive and aircraft engines, laboratory chemicals and equipment.
Quality industrial grade hardware, “CLEAN” agent, light weight, good discharge range and excellent
fire extinguishing ability.
Recycled gaseous agent certified to meet military specifications
AGENT TYPE
HALON 1211
VALVE TYPE
ANODIZED ALUMINUM
DESIGN
NOZZLE
HOSE
NOZZLE
MODEL NUMBER
A344T * C352TS * C354TS
B355T
UL & ULC RATING
2B:C
5B:C
5B:C
10B:C
CAPACITY (LBS.)
1.25
2.5
3
5
SHIPPING WT. (LBS.)
2.75
5.5
6
9.75
HEIGHT (IN.)
10
14.38
14.38
15.25
WIDTH (IN.)
3.63
4.5
6
5.75
DEPTH (IN.)
2.63
3
3
4.25
RANGE (INITIAL- FT)
9-12
9-15
9-15
9-15
DISCHARGE TIME (SEC.)
10
10
12
10
OPTIONAL CHROME CYLINDER
YES
YES
YES
YES
MINIMUM SPACE
156
312
375
624
REQUIREMENTS (CU. FT.)
INCLUDED BRACKET
VEHICLE AIRCRAFT AIRCRAFT VEHICLE
* SPECIAL VALVE DESIGN FOR AIRCRAFT INSTALLATIONS
CHROME PLATED BRASS
HOSE
B369
B371
361
1A:10B:C 2A:40B:C 4A:80B:C
9
13
17
16.75
22
36.25
16.25
20.25
24
8.5
8.5
9.75
5
5
7
12-18
12-18
12-18
9
14
22
YES
YES
1123
1622
2120
WALL
WALL
WALL
MADE IN U.S.A.
Manufactured and Tested to
ANSI/UL Standards
Complies with NFPA 10 Standard
ISO-9001/ ISO-14001 Certified
UL LISTED
CONFORMS TO TEST
STANDARDS:
UL-1093 - ANSI/UL711
7
CARBON DIOXIDE
Amerex Corporation
RUGGED
• 5 Year Warranty
• All Metal Valve Construction
• Rust free aluminum cylinders
• Durable High Gloss Polyester Powder Paint
• Temperature Range -22°F to 120°F
USER FRIENDLY
• Meets Many Hospital Medical Equipment Requirements
• Large Loop Stainless Steel Pull Pin
• Model 322NM Independently Tested and Approved for use in MRI Facilities to 7 Tesla
• Model 322NM Has Sanitary White Paint
Finish (easy to clean)
• Bar Coded and Bi-lingual Labels
OPTION
• USCG Approved with Bracket Listed on UL Label
MODELS
322330
331332
Also available in 50 / 100 lb. wheeled
extinguishers and 100 lb. stationary.
Model 322NM
NONMAGNETIC
MRI SAFE TO 7 TESLA
(USES 17737 WALL HANGER - INCLUDED)
CARBON DIOXIDE is discharged as a white cloud of “snow” which smothers a fire by eliminating
oxygen. It is effective for Class B flammable liquids and is electrically non-conductive. Carbon
Dioxide is a clean, non-contaminating, odorless gas.
Nonmagnetic model available (Model 322NM - tested to 7 Tesla)
8
AGENT TYPE
VALVE TYPE
DESIGN
MODEL NUMBER
UL RATING
CAPACITY (LBS.)
SHIPPING WT. (LBS.)
HEIGHT (IN.)
WIDTH (IN.)
DEPTH (IN.)
RANGE (INITIAL- FT)
DISCHARGE TIME (SEC.)
FM APPROVED
INCLUDED BRACKET
CARBON DIOXIDE
CHROME PLATED BRASS
HORN
HOSE & HORN
322 322NM
330 331 332
5B:C
5B:C 10B:C 10B:C 10B:C
5
5
10
15
20
14
14
28.25 37.75 50.75
17.75
17.75
24
30
30
8.25
8.25
12
12
13
5.25
5.25
7
7
8
3-8
3-8
3-8
3-8
3-8
10
10
10
12.5
19
YES
YES
YES YES YES
WALL NM WALL WALL WALL WALL
Manufactured and Tested to ANSI/UL Standards
Complies with NFPA 10 Standard
ISO-9001 / ISO-14001 Certified
UL LISTED
CONFORMS TO TEST STANDARDS:
CAN/ULC-S503 - ANSI/UL154 &
CAN/ULC-S508 - ANSI/UL711
MADE IN U.S.A.
CLASS D
Amerex Corporation
RUGGED
• 6 Year Warranty
• Stored Pressure Design
• Dependable Drawn Steel Cylinders
• Special corrosion resistant yellow
• (Class D) color coded paint finish
• All Metal Valve Construction
• Temperature Range -40°F to 120°F
USER FRIENDLY
• Unique “soft flow” extension applicator
plus built in long range nozzle
• Large Loop Stainless Steel Pull Pin
• Bar Coded and Bi-lingual Labels
MODELS
B570
B571
The Amerex “soft flow” extension applicator is particularly suited for fighting Class D fires. It keeps the operator’s
hands away from the extreme heat and prevents inhalation of toxic fumes caused by burning material. The
easily controlled, even discharge provides a non-dispersing application of the agent. The applicator may be
quickly detached to provide a straight stream of chemical where greater range, a narrow discharge pattern
or a lobbing effect is required.
MODEL B570 contains a special blended Sodium Chloride based dry powder extinguishing agent. Heat from the fire
causes it to cake and form a crust excluding air and dissipating heat from burning metal. Metal fires involving magnesium,
sodium, potassium and sodium-potassium alloys can be successfully extinguished with this extinguisher. There is data
showing that zirconium, uranium, titanium, and powdered aluminum fires can be controlled and extinguished with this
unique extinguisher.
Extinguishing Capacity
Available in 150 lb. Wheeled or Stationary
Magnesium Chips: 4 ft2 and/or 6 lbs. of metal
Sodium or Potassium Spill: 5 ft2 and/or 5 lbs.of metal
Sodium or Potassium Spill Depth Over 1/2”: 3 ft2 and or 6 lbs. of metal
Sodium Potassium Alloy Spil: 3 ft2 and/or 2 lbs. of metal
MODEL B571 contains a copper extinguishing agent specially developed by the U.S. Navy for fighting lithium and
lithium alloy fires. The copper compound smothers the fire and provides an excellent heat sink for dissipating heat.
Copper powder has been found to be superior to all other known fire extinguishing agents for lithium.
Extinguishing Capacity
4 ft2 and/or 5 lbs. of lithium
Available in 250 lb. Wheeled
OPTIONAL MODEL 859 DOLLY CART PROVIDES FOR EASY TRANSPORT
For Combustible Metal Fires
AGENT TYPE
VALVE TYPE
DESIGN
MODEL NUMBER
CAPACITY (LBS.)
SHIPPING WT. (LBS.)
HEIGHT (IN.)
WIDTH (IN.)
DEPTH (IN.)
RANGE (INITIAL- FT)
DISCHARGE TIME (SEC.)
FM APPROVED
INCLUDED BRACKET
SODIUM CHLORIDE
COPPER
CHROME PLATED BRASS
HOSE & HORN OR WAND APPLICATOR
B570
B571
30
30
53
53
35
35
13
13
8
8
3-6
3-6
24
18
YES
YES
WALL
WALL
Manufactured and Tested to ANSI/UL Standards
Complies with NFPA 10 Standard
ISO-9001 / ISO-14001 Certified
FM APPROVED
CONFORMS TO TEST STANDARDS:
CAN/ULC-S504 - ANSI/UL299 &
CAN/ULC-S508 - ANSI/UL711
MADE IN U.S.A.
9
ABC DRY CHEMICAL
Aluminum Valve
B417/T
B500/T
B402/T
B443
B456
A411
Amerex Corporation
RUGGED
• 6 Year Warranty
• Stored Pressure Design
• Dependable Drawn Steel Cylinders
• Durable High Gloss Polyester Powder Paint
• All Metal Valve Construction
• Temperature Range -65°F to 120°F
USER FRIENDLY
• Easy and More Economical to Maintain and
Service
• Large Loop Pull Pin
• Bar Coded and Bi-lingual Labels
Brass Valve
B424
B461
B441
423
OPTION
• USCG Approved with Bracket Listed on UL Label
Available in Wheeled and Stationary
Extinguishers
ABC or Multi-Purpose extinguishers utilize a specially fluidized and siliconized mono ammonium
phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350°F
and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires
and will not conduct electricity back to the operator.
Largest selection of size and extinguisher options available
AGENT TYPE
ABC DRY CHEMICAL
VALVE TYPE
ANODIZED ALUMINUM
CHROME PLATED BRASS
DESIGN
NOZZLE
HOSE & NOZZLE
HOSE & NOZZLE
MODEL NUMBER
B417/B417T B500/B500T B402/B402T
B443
B456
A411
B424
B461
B441
423
UL & ULC RATING
1A:10B:C
2A:10B:C
3A:40B:C
3A:40B:C 4A:80B:C 10A:120B:C 2A:10B:C 3A:40B:C 4A:80:B:C 10A:120B:C
CAPACITY (LBS.)
2.5
5
5
6
10
20
5
6
10
20
SHIPPING WT. (LBS.)
5.25/5.5
9.25/9.5
9.25/9.5
12.75
18
38
10.5
13.75
19
39
HEIGHT (IN.)
15.5
15.25
15.25
16
20
24
15.5
16.25
20.5
24
WIDTH (IN.)
5.75
7.25
7.25
7.75
7.75
10.25
8
8.5
8.75
10.25
DEPTH (IN.)
3
4.25
4.25
5
5
7
4.25
5
5
7
RANGE (INITIAL- FT)
9-15
12-18
12-18
15-21
15-21
15-21
12-18
15-21
15-21
15-21
DISCHARGE TIME (SEC.)
10
14
14
14.5
20
30
14
14
20
30
FM APPROVED
YES
YES
YES
YES
YES
YES
OPTIONAL CHROME CYLINDER
YES
YES
YES
YES
YES
YES
YES
YES
INCLUDED BRACKET
WALL/VEHICLE
WALL
WALL
WALL
Manufactured and Tested to ANSI/UL Standards
Complies with NFPA 10 Standard
ISO-9001 / ISO-14001 Certified
10
UL LISTED
CONFORMS TO TEST STANDARDS:
CAN/ULC-S504 - ANSI/UL299 &
CAN/ULC-S508 - ANSI/UL711
MADE IN U.S.A.
Amerex Corporation
RUGGED
• 6 Year Warranty
• Stored Pressure Design
• Dependable Drawn Steel Cylinders
• Durable High Gloss Polyester Powder Paint
• All Metal Valve Construction
• Temperature Range -65°F to 120°F
USER FRIENDLY
• Easy and More Economical to Maintain and
Service
• Large Loop Pull Pin
• Bar Coded and Bi-lingual Labels
Brass Valve
B462
B447
408
OPTION
• USCG Approved with Bracket Listed on UL Label
REGULAR DRY CHEMICAL
Aluminum Valve
A620T
B403/T
B409T
B453
B457
A412
Available in Wheeled and Stationary
Extinguishers
REGULAR extinguishers contain a siliconized sodium bicarbonate based dry chemical with free
flowing and non-caking additives. Economical Class B & C protection with lower initial cost and
recharging. This chemical smothers fires in flammable liquids and pressurized gases and will
not conduct electricity back to the operator.
Largest selection of size and extinguisher options available
AGENT TYPE
VALVE TYPE
DESIGN
MODEL NUMBER
UL & ULC RATING
CAPACITY (LBS.)
SHIPPING WT. (LBS.)
HEIGHT (IN.)
WIDTH (IN.)
DEPTH (IN.)
RANGE (INITIAL- FT)
DISCHARGE TIME (SEC.)
FM APPROVED
OPTIONAL CHROME CYLINDER
INCLUDED BRACKET
REGULAR DRY CHEMICAL
ANODIZED ALUMINUM
A620T
2B:C
1
2.5
10
3.5
2.63
5-8
10
YES
VEHICLE
NOZZLE
B403/B403T
10B:C
2.5
5.5
15.5
5.75
3
9-15
10
YES
YES
WALL/VEHICLE
B409T
10B:C
5
9.25
15.25
5.5
4.25
12-18
10
YES
YES
VEHICLE
Manufactured and Tested to ANSI/UL Standards
Complies with NFPA 10 Standard
ISO-9001 / ISO-14001 Certified
UL LISTED
B453
40B:C
5.5
9.75
15.25
7.25
4.25
12-18
14
YES
B457
60B:C
10
18
20
7.75
5
15-21
18
YES
YES
CHROME PLATED BRASS
HOSE & NOZZLE
A412
B462
B447
408
120B:C
40B:C
60B:C
120:B:C
20
6
10
20
38
13.75
19
39
24
16.25
20.25
24
10.25
8.5
8.75
10.25
7
5
5
7
15-21
15-21
15-21
15-21
28
14
18
28
YES
YES
YES
YES
YES
YES
WALL
CONFORMS TO TEST STANDARDS:
CAN/ULC-S504 - ANSI/UL299 &
CAN/ULC-S508 - ANSI/UL711
MADE IN U.S.A.
11
PURPLE K DRY CHEMICAL
Amerex Corporation
Aluminum Valve
B410T
B479/T
A413
RUGGED
• 6 Year Warranty
• Stored Pressure Design
• Dependable Drawn Steel Cylinders
• Durable High Gloss Polyester Powder Paint
• All Metal Valve Construction
• Temperature Range -65°F to 120°F
USER FRIENDLY
• Easy and More Economical to Maintain and
Service
• Large Loop Pull Pin
• Bar Coded and Bi-lingual Labels
OPTION
• USCG Approved with Bracket Listed on UL Label
Brass Valve
B460
415
Available in Wheeled and Stationary
Extinguishers
PURPLE K extinguishers contain specially fluidized and siliconized potassium bicarbonate dry
chemical which is particularly effective on Class B flammable liquids and pressurized gases. It is
electrically non-conductive. Purple K has been the choice of oil, gas, chemical and utilities industries
as the perfered fire fighting agent.
Largest selection of size and extinguisher options available
AGENT TYPE
VALVE TYPE
DESIGN
MODEL NUMBER
UL & ULC RATING
CAPACITY (LBS.)
SHIPPING WT. (LBS.)
HEIGHT (IN.)
WIDTH (IN.)
DEPTH (IN.)
RANGE (INITIAL- FT)
DISCHARGE TIME (SEC.)
FM APPROVED
OPTIONAL CHROME CYLINDER
INCLUDED BRACKET
PURPLE K DRY CHEMICAL
ANODIZED ALUMINUM
CHROME PLATED BRASS
NOZZLE
HOSE & NOZZLE
B410T
B479/B479T
A413
B460
415
10B:C
30B:C
120B:C
80B:C
120B:C
2.5
5
20
10
20
5.5
9.5
38
19
39
15.5
15.25
24
20.5
24
5.75
7.25
10.25
8.75
10.25
3
4.25
7
5
7
9-15
12-18
15-21
15-21
15-21
10
12
28
22
28
YES
YES
YES
YES
YES
YES
YES
VEHICLE
WALL/VEHICLE
WALL
Manufactured and Tested to ANSI/UL Standards
Complies with NFPA 10 Standard
ISO-9001 / ISO-14001 Certified
12
UL LISTED
CONFORMS TO TEST STANDARDS:
CAN/ULC-S504 - ANSI/UL299 &
CAN/ULC-S508 - ANSI/UL711
MADE IN U.S.A.
RUGGED
• 12 Year Warranty
• Hot Dip Galvanized Drawn Steel Cylinders
• High Gloss Polyester Powder Paint
(Best corrosion protection available)
• All Metal Valve Construction
• Gauge Guards
• Protective Rubber Foot Rings
• Superior Range (Vertical & Horizontal)
• High (240 PSI) Operating Pressure
• Temperature Range -65°F to 120°F
Fast Flow
594
581
567
582
568
595
580
584
569
Choice of Chemicals:
ABC Multi Purpose, Regular, Purple K
Select Fast Flow for:
High Flow Rate
Fast Discharge
Quicker Knockdown
More Operator Protection
Compliance Flow
592
564
589
599
566
591
HIGH PERFORMANCE
Amerex Corporation
Select Compliance Flow for:
Long Range
Highest UL Ratings
USER FRIENDLY
• Wide Grip Allows Clearance for Gloved Hand
• Large Loop Stainless Steel Pull Pin
• Bar Coded and Bi-lingual Labels
OPTION
• USCG Approved with Bracket Listed on UL Label
• Hot dip galvanized USCG brackets available
Available in 125 and 250 lb. Wheeled and
Stationary extinguishers
HIGH PERFORMANCE extinguishers are the ultimate choice in fire extinguishers for high hazard,
frequent use and extreme environment applications. Economical - less initial cost, lower maintenance
costs and greater reliability than cartridge operated extinguishers.
Lower initial cost and lower costs to maintain
AGENT TYPE
PERFORMANCE
VALVE TYPE
DESIGN
MODEL NUMBER
UL & ULC RATING
CAPACITY (LBS./KG)
SHIPPING WT. (LBS.)
HEIGHT (IN.)
WIDTH (IN.)
DEPTH (IN.)
RANGE (INITIAL- FT)
DISCHARGE TIME (SEC.)
AVERAGE DISCHARGE RATE
(LBS./SEC.)
INCLUDED BRACKET
ABC DRY CHEMICAL
REGULAR DRY CHEMICAL
FAST FLOW
PURPLE K DRY CHEMICAL
ABC DRY CHEMICAL
PURPLE K DRY CHEMICAL
COMPLIANCE FLOW
CHROME PLATED BRASS WITH GAUGE GUARD
594
2A:40:BC
13.2/6
31
17.5
10.5
7
15
.94
581
4A:40B:C
20/9
42.5
24.75
10.5
7
40-50
18
1.20
567
4A:40B:C
30/13.6
58
26.5
11
8
21
1.60
WALL
HOSE & NOZZLE
582
568
40B:C
40B:C
13.2/6
20/9
42.5
58
24.75
26.5
10.5
11
7
8
40-50
15
17
1.40
1.76
595
40B:C
13.2/6
31
17.5
10.5
7
15
.94
WALL
Manufactured and Tested to ANSI/UL Standards
Complies with NFPA 10 Standard
ISO-9001 / ISO-14001 Certified
UL LISTED
580
40B:C
20/9
42.5
24.75
10.5
7
40-50
15
1.44
WALL
584
20B:C
20/9
42.5
24.75
10.5
7
569
40B:C
30/13.6
58
26.5
11
8
10
2.00
16
1.88
592
564
589
4A:80B:C 10A:120B:C 10A:160B:C
13.2/6
20/9
30/13.6
31
42.5
58
17.5
24.75
26.5
10.5
10.5
11
7
7
8
40-50
22
30
34
.59
.65
.95
599
80B:C
13.2/6
31
17.5
10.5
7
22
.61
WALL
566
120B:C
20/9
42.5
24.75
10.5
7
40-50
29
.67
591
160B:C
30/13.6
58
26.5
11
8
34
.81
WALL
CONFORMS TO TEST STANDARDS:
CAN/ULC-S504 - ANSI/UL299 &
CAN/ULC-S508 - ANSI/UL711
MADE IN U.S.A.
13
HIGH FLOW
Amerex Corporation
RUGGED
• 6 Year Warranty
• Stored Pressure Design
• Dependable Drawn Steel Cylinders
• Durable High Gloss Polyester Powder Paint
• All Metal Valve Construction
• Twice the Flow Rate of Standard Models
• Meets DOT Requirements
• Temperature Range -65°F to 120°F
USER FRIENDLY
• Easy and More Economical to Maintain and
Service
• Large Loop Stainless Steel Pull Pin
• Bar Coded and Bi-lingual Labels
MODELS (10 LB)
720
721
722
MODELS (20 LB)
760
761
762
OPTION
• USCG Approved with Bracket Listed on UL Label
• ABC, Regular, or Purple K Chemical
HIGH FLOW portable fire extinguishers for applications where discharge rates exceeding one pound
per second are required as specified in NFPA 10. These extinguishers utilize the same hardware
and are manufactured to the same U.L. specifications as Amerex compliance rated products.
HIGH FLOW - Exceeds 1 lb. per second discharge rate
Agent Type
Model Number
Capacity (lbs.)
Application
U/L Rating
Shipping Weight (lbs.)
Discharge Time (sec.)
Discharge Rate (lbs./sec.)
Discharge Range (ft.)
ABC
ABC
720
760
10
20
HOSE & NOZZLE
721
761
10
20
HOSE & NOZZLE
722
762
10
20
HOSE & NOZZLE
1A:20B:C
19
10
1.22
4A:60B:C
39
19
1.14
20B:C
19
10
1.15
60B:C
39
20
1.13
20B:C
19
11
1.15
60B:C
39
20
1.08
15-25
15-25
15-25
15-25
15-25
15-25
Height (in.)
Width (in.)
20½
8¾
24
10¼
20½
8¾
24
10¼
20½
8¾
24
10¼
Depth (in.)
5
7
5
7
5
7
Temperature Range (°F)
Included Bracket
WALL
Manufactured and Tested to ANSI/UL Standards
Complies with NFPA 10 Standard
ISO-9001 / ISO-14001 Certified
14
REGULAR REGULAR PURPLE K PURPLE K
UL LISTED
-65°F to 120°F
WALL
WALL
CONFORMS TO TEST STANDARDS:
CAN/ULC-S504 - ANSI/UL299 &
CAN/ULC-S508 - ANSI/UL711
MADE IN U.S.A.
WET CHEMICAL CHARGES
Charge 530-2, two 6 liter bottles – Model B260
Charge 660-2, two 2½ gal. bottles – Model B262
WATER MIST CHARGES
Charge 670-2, two 1¾ gal. bottles – Model B270NM
Charge 671-2, two 2½ gal. bottles – Model B272NM
HALOTRON™ I CHARGES
Charge 890, 35 lb. cylinder
Charge 891, 80 lb. cylinder
Charge 892, 200 lb. cylinder
RECHARGE AGENTS
WATER & FOAM CHARGES
Charge 502, 8 oz. bottle AFFF – Model 250 & 254
Charge 504, 38½ oz. bottle FFFP – Model 252
Charge 506, 10 lb. carton Loaded Stream/Anti-Freeze – Model 240
Charge 534, 2 gal. pail FFFP – Model 630 & 631 Wheeled
CLASS D DRY POWDER CHARGES
Charge 543, 35 lb. pail Graphite (G-Plus)
Charge 532, 300 lb. drum Graphite (G-Plus)
[Graphite applied to a metal fire using scoop or shovel]
Charge 557, 30 lb. pail Sodium Chloride (Super D) – Model B570 & 680
Charge 545, 50 lb. pail Sodium Chloride (Super D) – Model B570 & 680
[Sodium Chloride (Super D) may also be dispensed by a scoop or shovel}
Charge 548, 50 lb. pail Copper (Navy 125S) – Model B571 & 681
ABC DRY CHEMICAL CHARGES
Charge 552, 25 lb. pail
Charge 550, 50 lb. pail
Charge 555, 50 lb. pail – Model B402
Charge 540, 40 lb. carton
Charge 540-4, four 10 lb. bags in 40 lb. carton
Charge 509, 400 lb. drum
REGULAR DRY CHEMICAL CHARGES
Charge 512, 50 lb. pail
Charge 541, 40 lb. carton
Charge 541-4, four 10 lb. bags in 40 lb. carton
Charge 511, 400 lb. drum
PURPLE K DRY CHEMICAL CHARGES
Charge 553, 25 lb. pail
Charge 515, 50 lb. pail
Charge 542, 40 lb. carton
Charge 542-4, four 10 lb. bags in 40 lb. carton
Charge 517, 400 lb. drum
15
BRACKET OPTIONS
Wall Hanger Brackets
01007 (Red)
14315 (NM)
Bracket Adapters
0546 0575 0577 17737 (NM)
04834 01521 05525
16536* 16538*
* Galvanized
09582 09581 16591
16537
16594 16598 16596
10 lb. Wall Strap Type
889
889HB
846
Vehicle / Marine / Aviation Brackets
845
817
818
817S
818S
821
821S
861H
808
Heavy Duty Box Type Vehicle Brackets
(Red Brackets are Galvanized)
807
809
812
Heavy Duty
Dolly Cart
809G
810G
811G
811
810 / 810NM
Heavy Duty Rubber
Strap Brackets
810CG (USCG)
895
“I” Beam Brackets
Exterior & Interior
868 - 6”, 8”, 10”, 12”
16
859
860
862
864
872 - 6” to 8”, 10” to 12”
WATER
WATER MIST
AFFF FOAM
FFFP FOAM
WET
CHEMICAL
HALOTRON® I
HALON 1211
ABC
DRY CHEMICAL
REGULAR
DRY CHEMICAL
PURPLE K
DRY CHEMICAL
SIZE
(CAPACITY)
MODEL
CYL.
DIA.
(INCH)
INCLUDED
BRACKET
USCG
BRACKET
OPTIONAL
BRACKETS
RUBBER
STRAP
BRACKETS
859
DOLLY
OPTION
YES
2.5 GAL.
240
7
01007 WALL
N/A
810
864
1.75 GAL.
B270NM
7
14315 WALL
N/A
810NM
N/A
2.5 GAL.
B272NM
7
14135 WALL
N/A
810NM
N/A
6 LITER
254
7
01007 WALL
N/A
810
864
2.5 GAL.
250
7
01007 WALL
N/A
810
864
YES
2.5 GAL.
252
7
01007 WALL
N/A
810
864
YES
6 LITER
B260
7
01007 WALL
810
810
N/A
2.5 GAL.
B262
7
01007 WALL
810
810
N/A
6 LITER
B260CG
7
01007 WALL
810CG
N/A
N/A
2.5 GAL.
B262CG
7
01007 WALL
810CG
N/A
N/A
1.4 LB.
A384T
2.88
845 VEHICLE
N/A
N/A
N/A
2.5 LB.
B385TS
4.25
817S AIRCRAFT
N/A
817S
860
5 LB.
B386T
4.25
818 V/MARINE
818, 821, 861H
818S, 821, 821S, 807
860
5.5 LB.
B394TS
4.25
818S AIRCRAFT
N/A
N/A
N/A
11 LB.
397
6
00575 WALL
812
812
N/A
15.5 LB.
398
6
00575 WALL
812
812
N/A
1.25 LB.
A344T
2.88
845 VEHICLE
N/A
N/A
N/A
YES
2.5 LB.
C352TS
3
817S AIRCRAFT
N/A
N/A
860
3 LB.
C354TS
3
817S AIRCRAFT
N/A
N/A
860
5 LB.
B355T
4.25
818 V/MARINE
818, 821, 861H
818S, 821, 821S, 807
860
9 LB.
B369
5
00546 WALL
808, 809
808, 809, 889HB
862
13 LB.
B371
5
01007 WALL
809
846, 809, 889HB
862
17 LB.
361
7
00577 WALL
810
810
864
2.5 LB.
B417 / B417T
3
4834 WALL / 817 VM
817
817S
860
5 LB.
B402 / B402T
4.25
16591 WALL / 818 VM
818, 821, 861H
818S, 821, 821S, 807
862
5 LB.
B500 / B500T
4.25
16591 WALL / 818 VM
818, 821, 861H
818S, 821, 821S, 807
862
5 LB.
B424
4.25
16591 WALL
821, 861H
821, 821S, 807
862
6 LB.
B443
5
05525 WALL
808, 809, 895
808, 809, 889, 895
862
6 LB.
B461
5
00546 WALL
808, 809, 895
808, 809, 889, 895
862
10 LB.
B456
5
00546 WALL
808, 809, 895
808, 809, 889, 889HB, 895
862
10 LB.
B441
5
01007 WALL
809, 895
808, 809, 889HB, 895
862
20 LB.
A411
7
00577 WALL
810
810
864
YES
20 LB.
423
7
00577 WALL
810
810
864
YES
1 LB.
A620T
2.88
845 VEHICLE
N/A
N/A
N/A
2.5 LB.
B403 / B403T
3
4834 WALL / 817 VM
817
817S
860
5 LB.
B409T
4.25
818 V/MARINE
818, 821, 861H
807, 818, 821, 861H
862
5.5 LB.
B453
4.25
16591 WALL
818, 821, 861H
807, 818, 821, 861H
862
6 LB.
B462
5
00546 WALL
808, 809, 895
808, 809, 889HB, 895
862
10 LB.
B447
5
01007 WALL
809, 895
809, 846, 889HB, 895
862
10 LB.
B457
5
00546 WALL
809, 895
809, 846, 889HB, 895
862
20 LB.
A412
7
00577 WALL
810
810
864
YES
20 LB.
408
7
00577 WALL
810
810
864
YES
2.5 LB.
B410T
3
817 V/MARINE
817
817S
860
860
YES
5 LB.
B479 / B479T
4.25
16591 WALL / 818 VM
818, 821, 861H
807, 818S, 821, 821S, 861H
10 LB.
B460
5
01007 WALL
809, 895
809, 846, 889HB
862
20 LB.
A413
7
00577 WALL
810
810
864
YES
20 LB.
415
7
00577 WALL
810
810
864
YES
5 LB.
322
5.25
00546 WALL
809
809
862
N/A
5 LB.
322NM
5.25
17737 WALL
N/A
N/A
10 LB.
330
7
00575 WALL
810
810
N/A
15 LB.
331
7
00575 WALL
810
810
864
YES
20 LB.
332
8
00577 WALL
811
811
864
YES
13.2 LB.
(6 KG)
594, 592, 595,
599
7
09582 WALL
810
&
810G
810
&
810G
N/A
20 LB.
(9 KG)
581, 582, 580,
584, 564, 566
7
09852 WALL
810
&
810G
810
&
810G
864
&
874
YES
30 LB.
(13.6 KG)
567, 568, 569
589, 591
7
09581 WALL
811
&
811G
811
&
811G
864
YES
HIGH FLOW
EXTINGUISHERS
10 LB.
720, 721, 722
5
01007 WALL
809, 895
808, 809, 889HB, 895
862
20 LB.
760, 761, 762
7
00577 WALL
810
810
864
YES
CLASS D
DRY POWDER
30 LB.
B570
8
00577 WALL
N.A
811
864
YES
30 LB.
B571
8
00577 WALL
N/A
811
864
YES
CARBON
DIOXIDE
HIGH
PERFORMANCE
DRY CHEMICAL
FAST FLOW
AND
COMPLIANCE
FLOW
BRACKET REFERENCE
AGENT
TYPE
All Amerex brackets are quality made and manufactured of steel with a powder coated paint. The paint finish assures many years of use and
meets the latest UL salt spray requirements (240 hrs. @ 20% salt solution - ASTM B117).
17
WHEELED
Wheeled Extinguishers
The largest variety of QUALITY wheeled fire extinguishers available anywhere. All available in a Stationary
configuration (except 50 lb. Carbon Dioxide). See Amerex “Wheeled Fire Extinguishers” brochure for
more details.
DRY CHEMICAL STORED PRESSURE
Models 495, 496, 497
50 lb. Dry Chemical
Models 573, 574, 575, 690
HIGH PERFORMANCE
125 / 250 lb. Dry Chemical
Models 488, 489, 490
125/150 lb. Dry Chemical
DRY CHEMICAL NITROGEN CYLINDER OPERATED
Models 450, 451, 452
125/150 lb. Dry Chemical
CLASS D
Model 680 150 lb.
Sodium Chloride
Model 681 250 lb. Copper
18
Models 467, 468, 469
125/150 lb. Dry Chemical
Models 470, 471, 472
125/150 lb. Dry Chemical
Models 491, 492, 493
300/350 lb. Dry Chemical
FOAM
CARBON
DIOXIDE
HALOTRON™ I
Model 630
33 gal. FFFP Foam
Model 333
50 lb. Carbon Dioxide
Model 334
100 lb. Carbon Dioxide
Models 673, 674, 675
65 lb. / 150 lb.
Halotron™ I
Vehicle Fire Suppression Systems:
Amerex Vehicle Fire Suppression Systems may make it easier to obtain insurance and also help you qualify
for lower premiums. As the costs of heavy duty vehicles increase, insurance rates escalate accordingly. Many
insurance companies have recognized a reduction in claims paid out due to the presence of a fixed vehicle
fire suppression system. The Amerex Fire Suppression System will lower your fire risk, which can lower your
insurance premiums. The key phrase is “material change of risk.” Ask your insurance agent.
AMGADS III:
Amerex Mobile Gas Detection System - (3rd Generation) gas monitoring system is a pre-engineered system
designed to be utilized on any type of alternatively fueled vehicle. The system can be installed by the vehicle
OEM or retrofitted. Its advanced technology can detect: Compressed Natural Gas (CNG), Liquified Natural
Gas (LNG), Propane (LPG), Hydrogen and any other hydrocarbon fuel vapors.
SMALL BUS SYSTEM:
The Amerex Small Vehicle System (SMVS) is designed specifically for applications involving front engine
vehicles such as Para-Transit, Airport Shuttle buses and other small front engine vehicles. The SMVS
kit includes all hardware and components required for a complete turn-key Automatic Fire Suppression
System. The electronics portion of the system is made up of a Vehicle Operator Display with Manual Release
Push Button, a wiring Interface Module, and two Solid State Heat Detectors. The system is continuously
supervised by the system panel which can detect and actuate the system even when the vehicle is not in use.
KP RESTAURANT SYSTEM:
The Amerex KP Restaurant System is a pre-engineered, wet chemical, stored-pressure type with
a fixed nozzle agent distribution network. The system is listed by Underwriter’s Laboratories, Inc.,
ULC and tested to U.L. Standard 300. The system shall be designed, installed and maintained in
accordance with: Amerex Part No. 20150 “Design, Installation and Maintenance Manual”, N.F.P.A.
96, N.F.P.A. 17A, local codes and ordinances by an Authorized Amerex KP Systems Distributor using factory trained personnel.
SUPPRESSION SYSTEMS
Amerex Fire Suppression Systems
ZONE DEFENSE RESTAURANT SYSTEM:
The Zone Defense Restaurant Fire Suppression System is a pre-engineered, wet chemical, stored-pressure type
with a fixed nozzle agent distribution network manufactured by Amerex Corporation. The system is
listed by Underwriter’s Laboratories, Inc., ULC and tested to UL Standard 300. The system shall be
designed, installed and maintained in accordance with: Amerex Part No. 20150 “Design, Installation
and Maintenance Manual”, N.F.P.A. 96, N.F.P.A. 17A, local codes and ordinances by an Authorized Amerex
Zone Defense Systems Distributor using factory trained personnel. The Zone Defense system is fully self-contained and does
not require electrical power or connection to either domestic water supply or fire sprinkler supply lines.
AUTOMATIC INDUSTRIAL DRY CHEMICAL SYSTEM:
The Amerex “IS” system uses our exclusive ABC (Model 555) dry chemical. ABC dry chemical
suppresses more fire, by volume, than any other agent, has quick flame “knock-down” and can
help to secure Class A fires against re-ignition. Since many hazards involve a variety of fuel
sources, our ABC dry chemical, with protection against Class A (wood, paper, pulp), Class B (flammable liquids)
and Class C (live electrical equipment) is the agent that is best suited for most Industrial hazards.
NDUSTRIAL
YSTEMS
PRE-ENGINEERED CLEAN AGENT SYSTEM:
Utilizing an industry recognized fire suppression agent FM-200® or NOVEC 1230™,
Amerex has developed an affordable pre-engineered clean agent fire suppression
system to protect areas with sensitive electrical equipment and valuable data. The
modular design incorporates pre-assembled wiring harnesses and keyed locking connectors on all
electrical components to assist you in a simple and confident installation. Agent tanks are available
in two sizes having a diameter of 10 inches making tank location in confined spaces easier. The Amerex CPS is
monitored by an electrical control panel that has a battery back-up for 24 hour protection during power failure.
Photoelectric smoke detectors are used for detection and are cross zoned to reduce the potential for unwanted system
discharge. A bell and horn/strobe device alarm when fire conditions are present. All electrical circuits are supervised and
factory terminated.
PLEASE SEE INDIVIDUAL SYSTEMS BROCHURES FOR MORE INFORMATION
AVAILABLE TO AUTHORIZED DISTRIBUTORS AND FACTORY TRAINED PERSONNEL
19
Amerex Corporation
7595 Gadsden Hwy. • P.O. Box 81
Trussville, AL 35173
Ph: (205) 655-3271
Fax: 1-800-654-5980
Int’l Fax: (205) 655-0584
www.amerex-fire.com
sales@amerex-fire.com
ISO 9001 - Quality
ISO 14001 - Environmental
OHSAS 18001 - Safety
CERTIFIED FIRM
For more information please contact:
Amerex Corporation makes every attempt possible to provide the most current and updated information. Information
contained within this brochure is deemed to be as accurate as possible as of the printing date. Routine changes to
products, codes and standards, and warranties subsequent to this printing will supersede printed information. Please
contact Amerex Corporation for any revisions, updates, or product changes.
Copyright © Amerex Corporation 2011
Part No. SL-100 09/2011