TRUE FOOD SERVICE
EQUIPMENT, INC.
ITEM #7
Project Name:
AIA #
Location:
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366
Item #:
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Parts Dept. (800)424-TRUE • Parts Dept. FAX# (636)272-9471
Model #:
SIS #
Qty:
Undercounter:
Model:
TUC-27
Solid Door Refrigerator
TUC-27
True’s undercounter units are
designed with enduring quality
that protects your long term
investment.
Designed using the highest
quality materials and
components to provide the
user with colder product
temperatures, lower utility
costs, exceptional food safety
and the best value in today’s
food service marketplace.
Oversized, environmentally
friendly (134A) forced-air
refrigeration system holds 33°F
to 38°F (.5°C to 3.3°C).
All stainless steel front, top
and cabinet ends. Matching
aluminum finished back.
Front breathing.
Foamed-in-place, high density
polyurethane insulation (CFC
free).
Heavy duty PVC coated wire
shelves.
ROUGH-IN DATA
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
Cabinet Dimensions
(inches)
Capacity
(Cu. Ft.)
Model
TUC-27
Doors
1
(liters)
6.5
(mm)
Shelves
2
185
†
*
Crated
Cord Length Weight
(lbs.)
NEMA
(total ft.)
Amps Config.
(kg)
(total m)
3.9
5-15P
7
190
L
275/8
D†
301/8
H*
293/4
HP
1/6
Voltage
115/60/1
702
766
756
1/4
230-240/50/1
2.9
▲
APPROVALS:
TM
MADE IN
U.S.A.
®
R
SINCE 1945
12/05
Printed in U.S.A.
87
▲ Plug type varies by country.
Depth does not include 1" (26 mm) for rear bumpers.
Height does not include 61/4" (159 mm) for castors or 6" (153 mm) for optional legs.
TRUE REFRIGERATION
2.13
AVAILABLE AT:
ITEM #7
Model:
Undercounter:
TUC-27
Solid Door Refrigerator
STANDARD FEATURES
DESIGN
• True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures,
lower utility costs, exceptional food
safety and the best value in today’s
food service marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free)
134A refrigerant.
• Oversized, factory balanced
refrigeration system with guided
airflow to provide uniform product
temperatures.
• Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser; maintains cabinet
temperatures of 33°F to 38°F (.5°C to
3.3°C) for the best in food preservation.
• Sealed, cast iron, self-lubricating
evaporator fan motor and larger fan
blades give True undercounter units
a superior low velocity, high volume
airflow design. This unique design
insures faster temperature recovery
and shorter run times in the busiest of
food service environments.
• Condensing unit access in back
of cabinet, slides out for easy
maintenance.
CABINET CONSTRUCTION
• Exterior - stainless steel front, top and
cabinet ends. Matching aluminum
finished back.
• Interior - attractive, NSF approved,
white aluminum liner. 300 series
stainless floor with coved corners.
• Insulation - entire cabinet structure and
solid door are foamed-in-place using
high density, CFC free, polyurethane
insulation.
• 5" (127 mm) diameter stem castors
standard - locks provided on front set.
36" (915 mm) work surface height.
DOOR
• Stainless steel exterior with white
aluminum liner to match cabinet
interior.
• Door fitted with 12" (305 mm) long
recessed handle that is foamed-in-place
with a sheet metal interlock to insure
permanent attachment.
• Positive seal self-closing door with 90°
stay open feature. Door swings within
cabinet dimensions.
• Magnetic door gasket of one piece
construction, removable without tools
for ease of cleaning.
SHELVING
• Two (2) adjustable, heavy duty PVC
coated wire shelves 231/4"L x 16"D
(591 mm x 407 mm). Four (4) chrome
plated shelf clips included per shelf.
• Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on 1/2" (13 mm) increments.
MODEL FEATURES
• Evaporator is epoxy coated to
eliminate the potential of corrosion.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory
and ready for final connection to a
115/60/1 phase - 15 amp dedicated
outlet. Cord and plug set included.
115/60/1
NEMA-5-15R
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230 - 240V / 50 Hz.
❒ 6" (153 mm) standard legs.
❒ 6" (153 mm) seismic/flanged legs.
❒ 21/2" (64 mm) diameter castors.
❒ Barrel lock (factory installed).
❒ Basic overshelf.
❒ Single utility shelf.
❒ Double utility shelf.
❒ Stacking collar.
❒ 30" (762 mm) deep, 1/2" (13 mm) thick,
white polyethylene cutting board.
Requires “L” brackets.
❒ 30" (762 mm) deep, 1/2" (13 mm) thick,
composite cutting board. Requires “L”
brackets.
❒ Heavy duty, 16 gauge tops.
❒ ADA compliant models with 34"
(864 mm) work surface height.
❒ Low profile models with 317/8"
(810 mm) work surface height.
❒ Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A expansion valve
and requires R404A refrigerant).
Consult factory technical service
department for BTU information.
PLAN VIEW
5529/32"
(1421 mm)
2427/32"
279/16"
(701 mm)
301/16"
(764 mm)
(632 mm)
1"
(26 mm)
293/4"
(756 mm)
3515/16"
(913 mm)
25/16"
(59 mm)
3 7 /8 "
(99 mm)
125/8"
(321 mm)
ELEVATION
WARRANTY
One year warranty on all parts
and labor and an additional 4
year warranty on compressor.
(U.S.A. only)
75/16"
(186 mm)
63/16"
(158 mm)
RIGHT VIEW
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
KCL
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model
Elevation
Right
Plan
3D
TUC-27
TFQY01E
TFQY01S
TFQY01P
TFQY013
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Page 1 of 1
http://foodguards.com/ep15spec.htm
12/18/2007
ITEM #8
EP-15 spec. page by ADM Sneezeguards 800-690-0002
W E L LS M A N U FA CT U R I N G
W E L LS M A N U FA CT U R I N G
R
R
LISTED
E162919
STD 7
DIMENSIONS:
REFRIGERATED COLD PANS
INCH
(MM)
20
27 1/8
25 1/2
(508)
(689)
(648)
(1699)
Wells Refrigerated Cold Pans are self-contained display
units designed to hold pre-chilled products at serving
temperature. The pans are recessed 3” to comply with
NSF-7 performance requirements. The temperature of
the heavily insulated cold pan is electronically controlled,
providing flexibility and convenience.
14
PAN RAIL
66 7/8
Features
(356)
RCP-7500
• Drop-in, refrigerated cold pan is designed to hold
pre-chilled products at serving temperature.
25 3/8
74
(645)
(1880)
• Each pan has a large 1-inch drain located in the center
for easy cleaning.
RCP-7200
• Self-contained unit comes with an ON/OFF switch and
cordset for easy installation.
80 5/8
(2048)
• Air-cooled condensing unit has HFC-134a refrigerant,
which is CFC free.
RCP-7600
87 3/4
9 1/2
(2229)
1/4
(6)
11 3/8
(289)
3
(76)
1" NPT DRAIN
CENTERED IN PAN
21
(533)
POWER SUPPLY CORD
R C P - 7 5 0 0 A N D R C P - 7 6 0 0 E L E C T R I C A L S P E C I F I C AT I O N S :
VOLTS
WATTS
HP
AMPS
PHASE
POWER SUPPLY CORD
RCP-7500
115
805
1/4
7.0
SINGLE
NEMA 5-15P
RCP-7600
115
805
1/4
7.0
SINGLE
NEMA 5-15P
NOTE: Specifications are subject to change without notice. See installation instruction
sheet prior to installing the unit. This document is not for installation purposes.
WELLS MANUFACTURING COMPANY
• Fully insulated cold pans are refrigerated on both the
bottom and sides for greater efficiency.
Specifications
(241)
MODELS
ITEM #9
ITEM NO.
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A. • USA PHONE: (775) 345-0444 • FAX: (775) 345-0569
FOR ORDERS ONLY: (888) 356-5362 • FAX: (800) 356-5142 • www.wellsbloomfield.com
A SPECIALTY EQUIPMENT COMPANY • 2000 WELLS MANUFACTURING • PRINTED IN THE U.S.A. • 10/00 • REV(B) • PART NO. 302097
Overall Dimensions:
Width
RCP-7100
RCP-7200
RCP-7300
RCP-7400
RCP-7500
RCP-7600
Depth
Height
Weights:
RCP-7100 series:
Installed
Shipping
RCP-7200 series:
Installed
Shipping
RCP-7300 series:
Installed
Shipping
RCP-7400 series:
Installed
Shipping
RCP-7500 series:
Installed
Shipping
RCP-7600 series:
Installed
Shipping
• Recessed top edge lowers inset pan 3” to comply with
NSF-7 performance requirements and allows a layer of air
to insulate food, keeping it colder and fresher.
Inches
MM
19 1/8
32 3/4
46 1/2
60 1/4
74
87 3/4
27 1/8
25 3/8
Lbs.
486
832
1181
1530
1880
2229
689
645
KG
105
115
48
52
• A warranty against defects covers parts for one year
and labor for 90 days. An extended one-year labor and
five-year compressor warranty is available at extra charge.
124
140
56
64
Accessories / Options
156
175
71
79
Perforated Bottom Strainer Plate, available for all
models, contact factory
175
210
79
95
Extended Warranty/Labor, one (1) year, WEL1
194
245
88
111
213
285
97
129
• Each unit’s interior and top is heavy duty (18 gauge)
stainless steel construction for maximum strength
and durability.
• Optional perforated bottom strainer plate conveniently
holds ice above drain to avoid clogging.
• The RCP series Refrigerated Cold Pans are Underwriters
Laboratories, Inc. LISTED and meet the National Sanitation
Foundation standards.
Extended Warranty/Compressor Motor, five
(5) years, WEL5
WELLS
WELLS
R
A
I
S
I
N
G
T
H
E
S
T
A
N
D
A
R
D
REFRIGERATED COLD PANS
M O D E LS
RC P-7500, RC P-76 00
R E F R I G E R AT E D C O L D PA N S
W E L LS M A N U FA CT U R I N G
W E L LS M A N U FA CT U R I N G
M O D E LS
RC P-7100, RC P-7200
R E F R I G E R AT E D C O L D PA N S
R
R
LISTED
E162919
STD 7
M O D E LS
R C P - 73 0 0 , R C P - 74 0 0
R E F R I G E R AT E D C O L D PA N S
R
R
LISTED
E162919
STD 7
ITEM #9
DIMENSIONS:
DIMENSIONS:
INCH
(MM)
25 1/2
(648)
20 27 1/8
(508) (689)
12
(305)
19 1/8
(486)
1/4
(6)
RCP-7100
25 3/8
(645)
PAN RAIL
16 1/4
(413)
27 1/8
25 1/2
(508)
(689)
(648)
14
(356)
(1000)
46 1/2
25 3/8
RCP-7300
(1181)
1" NPT DRAIN
CENTERED IN PAN
20
PAN RAIL
39 3/8
9 1/2 11 3/8
(241) (289)
3
(76)
INCH
(MM)
(645)
53 1/8
POWER SUPPLY CORD
20 27 1/8
(508) (689)
(1349)
60 1/4
25 1/2
(648)
RCP-7400
(1530)
1/4
1/4
(6)
RCP-7200
25 5/8
(651)
32 3/4
(832)
PAN RAIL
14
(356)
25 3/8
(645)
9 1/2
3
1" NPT DRAIN
CENTERED IN PAN
L2
L3
POWER SUPPLY CORD
R C P - 7 1 0 0 A N D R C P - 7 2 0 0 E L E C T R I C A L S P E C I F I C AT I O N S :
VOLTS
WATTS
HP
AMPS
PHASE
POWER SUPPLY CORD
RCP-7100
115
460
1/6
4.0
SINGLE
NEMA 5-15P
RCP-7200
115
460
1/6
4.0
SINGLE
NEMA 5-15P
NOTE: Specifications are subject to change without notice. See installation instruction
sheet prior to installing the unit. This document is not for installation purposes.
WELLS MANUFACTURING COMPANY
(289)
POWER SUPPLY CORD
(413)
R C P - 7 1 0 0 A N D R C P - 7 2 0 0 E L E C T R I C A L S P E C I F I C AT I O N S :
MODELS
L1
16 1/4
1" NPT DRAIN
CENTERED IN PAN
16 1/4
(413)
11 3/8
(241)
(76)
9 1/2 11 3/8
(241) (289)
3
(76)
(6)
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A. • USA PHONE: (775) 689-5700 • FAX: (775) 689-5972
FOR ORDERS ONLY: (888) 356-5362 • FAX: (800) 356-5142 • www.wellsbloomfield.com
A SPECIALTY EQUIPMENT COMPANY • 2000 WELLS MANUFACTURING • PRINTED IN THE U.S.A. • 10/00 • REV(B) • PART NO. 302097
MODELS
VOLTS
WATTS
HP
AMPS
PHASE
POWER SUPPLY CORD
RCP-7300
115
805
1/4
7.0
SINGLE
NEMA 5-15P
RCP-7400
115
805
1/4
7.0
SINGLE
NEMA 5-15P
NOTE: Specifications are subject to change without notice. See installation instruction
sheet prior to installing the unit. This document is not for installation purposes.
WELLS
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A. • USA PHONE: (775) 345-0444 • FAX: (775) 345-0569
FOR ORDERS ONLY: (888) 356-5362 • FAX: (800) 356-5142 • www.wellsbloomfield.com
A SPECIALTY EQUIPMENT COMPANY • 2000 WELLS MANUFACTURING • PRINTED IN THE U.S.A. • 10/00 • REV(B) • PART NO. 302097
WELLS
ND Series with 16" wide PSP Accessory Section View
ND Series with 16" wide PSP Accessory Section View
Page 1 of 1
ITEM #10
http://www.captiveaire.com/catalogcontent/hoods/nd_psp/ndpsp166.asp?lprint=1&img=images/ndpsp166... 2/25/2007
ITEM #12
Project
Item number
Model SG14
Tube Fired Gas Fryer
Quantity
Model SG14
ITEM #14
STANDARD SPECIFICATIONS
CONSTRUCTION
< Welded tank with an extra smooth peened finish ensures
easy cleaning.
< Long-lasting, high-temperature alloy stainless steel heat
baffles are mounted in the heat exchanger tubes to provide
maximum heating and combustion efficiency.
< Standing pilot light design provides a ready flame when heat
is required.
< Stainless steel front, door, side, and splashback.
< Heavy duty 3/16” (.48 cm) door hinge.
CONTROLS
STANDARD ACCESSORIES
< Choice of basket options
c Two nickel-plated, oblong, wire mesh baskets
c One nickel-plated, square, wire mesh basket
< One nickel-plated tube rack
< One drain extension
< One drain line clean-out rod
< Fryer cleaner sample
< Rear gas connection
< Manual gas shutoff
< 1 ¼” (3.2 cm) full port drain valve
< Built-in integrated flue deflector
< Removable basket hanger for easy cleaning
< 9” (22.9 cm) adjustable legs
< Cabinet - stainless steel front, door, and sides
< Tank - mild steel
AVAILABLE OPTIONS & ACCESSORIES
c
c
c
c
c
Stainless steel tank
Stainless steel back
9” (22.9 cm) adjustable casters
Triple baskets
Covers
< Millivolt thermostat maintains selected temperature
automatically between 200°F (93°C) and 400°F (190°C-CE).
< Integrated gas control valve acts as a manual and pilot
valve, automatic pilot valve, gas filter, pressure regulator,
and automatic main valve.
< Gas control valve prevents gas flow to the main burner until
pilot is established and shuts off all gas flow automatically if
the pilot flame goes out.
< Temperature limit switch safely shuts off all gas flow if the
fryer temperature exceeds the upper limit.
< New Solstice burner/baffle design.***
-Increases cooking production.
-Lowers flue temperature.
-Improves working environment.
-Generates more production per BTU.
***Compared to previous models.
OPERATIONS
< Front 1 ¼” (3.2 cm) full port drain for quick draining.
< 9” (22.9 cm) clearance allows for ease of cleaning.
APPROVALS
< CSA Certified
(AGA, CGA)
< NSF Listed
< MEA Approved
< CE Certified
< Australian Gas Assoc.
Certified (AuGA)
CERTIFIED
CE
RTIFIED
Patent Pending
Financing Available-Maytag Commercial Lease Program
Call 1-800-666-6812 for Details
Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501
Phone (800) 258-3708 (603) 225-6684
DESIGN
509 Route 3A, Bow, NH 03304, USA
Fax (603) 225-8472 www.blodgettcorp.com
ITEM #14
Model SG14 - Tube Fired Gas Fryer
14 [35.6]
INCHES [CENTIMETERS]
14 [35.6]
48 5/16 [122.8]
INTEGRAL FLUE DEFLECTOR
15 5/8 [39.7]
34 [86.4]
11/16 [1.8]
1-1/4 INCH (3.2 CM) NPT
FULL PORT DRAIN VALVE
5/8 [1.6]
GAS CONNECTION ¾ INCH NPT.
CE AND AuGA MODELS USE ¾ INCH BSP
ADAPTER ADDING 1-½ INCH (3.8 CM)
TO THE CONNECTION.
46 1/8
[117.2]
34 [86.4]
NOM.
15 7/32
[38.6]
11 25/32
[29.9]
15 1/16
[38.2]
9 [22.9]
NOM.
1 25/32 [4.5]
1 9/16 [4.0]
7 13/16 [19.8]
12 1/16 [30.6]
4 23/32 [12.0]
24 3/4 [62.9]
GAS REQUIREMENTS
Gas Input Per Hour
110,000 BTUs / 33 kW (CE) / 119 megajoules (AuGA)
Recommended Minimum
Gas Type*
Store Manifold Pressure
Natural Gas
7” W.C. / 17.4 mbars / 1.75 kPa
L.P. Gas
13” W.C. / 32.4 mbars / 3.25 kPa
Clearance Information
All Models
Fryer Front
30” (76.2 cm) min.
Burner Manifold Pressure
4” W.C. / 10 mbars / 1 kPa
10” W.C. / 25 mbars / 2.5 kPa
Fryer Sides, Rear, Bottom to
any combustible material
6” (15.2 cm)
Do not Curb Mount
ELECTRICAL
Amps
0
SHIPPING INFORMATION
Shipping Weight
190 lbs
86 kg
Shipping Cube
19 ft 3
.54 m3
Fryer Flue Area
Do not block or restrict the flue
gasses from flowing into the
ventilation system.
OIL CAPACITY
Voltage / Phase / Frequency
Not required
Control Type
Millivolt
*For other gas types, contact your
Dealer/Distributor.
Check plumbing/gas codes for
proper gas supply line sizing.
40 – 50 pounds
(18 – 23 kg)
PERFORMANCE CHARACTERISTICS
Shipping H x W x L
45 ¼ x 18 ¾ x 38 ½ in
114.9 x 47.6 x 97.8 cm
Cooks 88 lbs (40 kg) of fries per hour
Frying area 14 x 14 x 4 in
35.6 x 35.6 x 10.2 cm
SHORT FORM SPECIFICATION
Provide Pitco Model SG14 tube fired gas fryer. Fryer shall have an atmospheric burner system combined with four stainless steel
heat tubes utilizing high temperature alloy stainless steel baffles. Fryer shall have a deep cool zone; minimum 23% of total oil
capacity to trap burnt particles, crumbs and black specks. Fryer cooking area shall be 14” x 14” (35.6 cm x 35.6 cm) with a
cooking depth of 4” (10.2 cm). Heat transfer area shall be a minimum of 600 sq. inches (3,871 sq. cm). Provide accessories as
follows.
TYPICAL APPLICATION
Frying a wide variety of foods in a limited amount of space. Frying that requires a high volume production rate.
Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501 509 Route 3A, Bow, NH 03304, USA
Phone (800) 258-3708 (603) 225-6684 Fax (603) 225-8472 www.blodgettcorp.com
L10-127 Rev. 01 07/01
Specifications subject to change without notice.
Printed in the USA
AIA #
ITEM #16
Project Name:
Location:
TRUE FOOD SERVICE EQUIPMENT, INC.
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
T-Series Reach-In Freezers
Item #:
Qty:
SIS #
Model #:
Solid Door Reach-In Freezers
(two & three door models)
❒ T-35F, ❒ T-49F, ❒ T-72F
SPECIFICATIONS / FEATURES
DOORS:
• 300 series stainless steel exterior with white aluminum interior to
match cabinet liner. Doors extend full width of cabinet shell. Door
gaskets of one piece construction.
• Lifetime guaranteed adjustable torsion spring mechanism with
aluminum block supports. The face of each door fitted with a 12"
long recessed handle with sheetmetal interlock. Handles are foamedin-place to insure permanent attachment.
INSULATION:
• Entire cabinet structure and doors insulated using foamed-in-place
CFC free polyurethane foam.
SHELVING:
• Adjustable vinyl coated wire shelves (3 per section). Shelves capable
of supporting up to 250 lbs.
• Full height shelf support pilasters, with double oblong holes on 1/2"
centers. Pilasters made of the same material as cabinet interior. Four
(4) chrome plated, stainless steel shelf clips to be included for each
shelf.
LIGHTING:
• Incandescent interior lighting. Light(s) activated by rocker switch
mounted above door(s).
REFRIGERATION SYSTEM:
• Refrigeration system factory balanced using CFC free R404A refrigerant.
T-49F
• Bottom mounted condensing unit - easy access for maintenance.
TRUE, rated the #1 brand in America.
SPECIFICATIONS / FEATURES
• Factory pre-engineered capillary tube system with oversized condenser
and evaporator to reduce product pull down time and to consistently
maintain -10°F interior cabinet temperature. (non-adjustable capillary
tube system superior to problematic expansion valve)
CABINET CONSTRUCTION:
• 300 series stainless steel front grill, shroud and doors. Anodized
quality aluminum exterior ends and back.
• Defrost system time initiated, temperature terminated.
• NSF approved, white vinyl coated aluminum and 300 series stainless
floor with coved corners.
• Large evaporator and coil heater permit short defrost cycle.
• Rear wall airflow guard and floor rack prevent frozen product from
blocking optimal airflow.
• Evaporator - epoxy coated at the time of manufacture to eliminate
the potential of corrosion.
• Barrel lock standard for each door. Locks keyed alike. Dial exterior
mounted temperature monitor.
ELECTRICAL CHARACTERISTICS:
• Unit completely pre-wired at factory, and ready for final connection
to appropriate outlet (see diagram below and NEMA listing next page.
A cord and plug set to be included.
• Cabinet mounted on a welded, galvanized frame rail, painted for
additional corrosion protection. Frame rail fitted with 4" diameter
castors, front castors include brakes.
Also available:
• Single Door Reach-In Freezers
• Top Mounts
• Glass Door Models
• Half Door Models
• Refrigerators
• All Stainless Steel In / Out
• Dual Temperature Models
Exceptions:
ERG
E
S
R
®
AV
S
5/1/02
N
R
T-72F
Specifications subject to change without notice.
5
YEAR
COMPRESSOR
• A sole use circuit is required.
T-35F
T-49F
Y
Printed in
U.S.A.
• Automatic evaporator fan motor delay during defrost cycle.
INGS
APPROVALS:
ITEM #16
T-Series: Two and Three Solid Door Reach-In Freezers
®
391/2"
L - 100 cm
D - 75 cm
H - 199 cm
Door
Swing - 46 cm
78"
54"
L - 137 cm
D - 75 cm
H - 199 cm
Door
Swing - 65 cm
291/2"
L - 198 cm
D - 75 cm
H - 201 cm
Door
Swing - 65 cm
291/2"
291/2"
551/4"
473/4"
181/4"
551/4"
253/4"
9 3/8"
253/4"
9 3/8"
9 3/8"
TRUE
TRUE
TRUE
541/4"
781/4"
781/4"
831/4"
541/4"
541/4"
831/4"
841/4"
113/4"
113/4"
17/8"
791/4"
5"
113/4"
17/8"
17/8"
5"
T-35F
5"
T-49F
T-72F
Rough-In Data
Model
Doors
T-35F
2
T-49F (1, 2)
2
T-72F* (2)
3
Capacity
(Cu. Ft)
35
49
72
# of
Shelves
6
6
9
Dimensions
(inches)
L
D
H†
39 1/2 29 1/2 78 1/4
54
29 1/2 78 1/4
78
29 1/2 79 1/4
HP
3/4
3/4
1
Volts
115
115
115/208
PH
1
1
1
Amps
15.0
13.2
10.5
NEMA
Config.
5-20
5-20
14-20
Cord
Length
(feet)
9
9
9
Crated
Weight
425
464
620
Specifications subject to change without notice.
(1) Available with full glass doors
(2) Available with solid half doors
* Requires 115/208-230/60 Hz, 3 pole, 4 wire.
† Height does not include 5” for castors or 6” for optional legs.
Standard Features___________________________________________________________________________________________
• 300 series stainless steel doors & front.
• Interior - NSF approved, white vinyl
coated aluminum sides and top, stainless
steel floor with coved corners.
• Anodized quality aluminum top, sides
and back.
• Oversized and balanced, environmentally
friendly refrigeration system holds -10°F.
• Recessed handles (lifetime guaranteed).
• Exterior mounted thermometer.
• Door locks.
• Magnetic door gaskets.
• Adjustable vinyl coated wire shelves.
• Epoxy coated evaporator.
• Standard backguard and floor rack
improve airflow.
• Incandescent interior lighting (fluorescent
interior lighting for glass door models).
• 4" swivel castors standard equipment locking castors provided for front set.
• Slide out compressor can be serviced easily
and accessed by a single repairman.
• Environmentally friendly R404A
refrigerant.
• Large evaporator and coil heater permit
short defrost cycle.
• Defrost system time initiated, temperature
terminated.
• Automatic evaporator fan motor delay
during defrost cycle.
• 1 year parts & labor warranty (USA).
• 5 year compressor warranty.
Optional Accessories ______________
Available with 6" stainless steel legs.
Additional shelves available.
Remote available for T-49F & T-72F.
T-49F available with dual right or dual left
hinges - no charge.
❒ T-72F available with three right or three
left hinges - no charge.
❒
❒
❒
❒
Clearance Required For Coolers (USA)
KCL
Model
T-35F
T-49F
T-72F
Front
TFEY04E
TFEY02E
TFEY01E
Right
TFEY04S
TFEY02S
TFEY01S
Plan
TFEY04P
TFEY02P
TFEY01P
3D
TFEY043
TFEY023
TFEY013
Sides
Inches/mm
2 / 50
Top
Inches/mm
6 / 152
Rear
Inches/mm
2 / 50
E
R
S
R
®
AV
S
TRUE FOOD SERVICE EQUIPMENT
ERG
Y
N
5
YEAR
COMPRESSOR
INGS
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Printed in U.S.A.
ITEM #17
AIA #
Project Name:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Location:
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366
Item #:
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Parts Dept. (800)424-TRUE • Parts Dept. FAX# (636)272-9471
Model #:
SIS #
Qty:
T Series:
Model:
T-72
Reach-In Solid Door Refrigerator
T-72
True’s solid door reach-in’s are
designed with enduring quality that
protects your long term investment.
Designed using the highest
quality materials and components
to provide the user with colder
product temperatures, lower utility
costs, superior food safety and the
best value in today’s food service
marketplace.
Oversized, factory balanced,
refrigeration system holds 33˚F to
38˚F (.56˚C to 3.33˚C) for the best in
food preservation.
300 series stainless steel solid doors
and front. The finest stainless
available; higher tensile strength
for fewer dents and scratches.
Adjustable, heavy duty PVC coated
shelves.
Positive seal self-closing doors.
Lifetime guaranteed door hinges
and torsion type closure system.
Bottom mounted units feature:
“No stoop” lower shelf.
Storage on top of cabinet.
Compressor performs in coolest,
most grease free area of kitchen.
Easily accessible condenser coil for
cleaning.
ROUGH-IN DATA
Solid
Doors
3
Model
T-72
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
Cabinet Dimensions
(inches)
Capacity
(Cu. Ft.)
# of
Shelves
9
(liters)
72
2039
(mm)
L
78 1/8
D
29 1/2
H*
79 1/8
HP
1/2
Voltage
115/60/1
Amps
11.8
NEMA
Config.
5-15P
1985
750
2010
1/2
230-240/50/1
6.9

N
3/04
AV
S
USA
APPROVALS:
ERG
YEAR
COMPRESSOR
WARRANTY
S
Y
5
E
* Height does not include 5" (127 mm) for castors or 6" (153 mm) for optional legs.
R
INGS
Printed in U.S.A.
Cord
Length
(total ft.)
Crated
Weight
(lbs.)
(total m)
(kg)
9
580
2.74
264
 Plug type varies by country.
ITEM #17
Model:
T-72
T Series:
Reach-In Solid Door Refrigerator
STANDARD FEATURES
DESIGN
• True’s commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, lower utility costs, superior
food safety and the best value in today’s
food service marketplace.
REFRIGERATION SYSTEM
• Factory engineered self-contained, capillary
tube system using environmentally friendly
(CFC free) 134A refrigerant.
• Extra large evaporator coil balanced with
higher horsepower compressor and large
condenser; maintains 33˚F to 38˚F (.56˚C to
3.33˚C) for the best in food preservation.
• Sealed, cast iron, self-lubricating evaporator
fan motors and larger fan blades give True
reach-in’s a superior low velocity, high
volume airflow design. This unique design
insures faster temperature recovery and
shorter run times in the busiest of food
service environments.
• Bottom mounted condensing unit positioned
for easy maintenance. Compressor runs in
coolest and most grease free area of the
kitchen. Allows for storage area on top of
unit.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel front grill
and shroud. Anodized quality aluminum
exterior ends and back.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless floor with
coved corners.
• Insulation - entire cabinet structure and solid
doors are foamed-in-place using high density,
CFC free, polyurethane insulation.
• Cabinet mounted on a welded, heavy
duty galvanized frame rail. Rail dipped in
rust inhibiting enamel paint for corrosion
protection inside and out.
• Frame rail fitted with 4" (102 mm) diameter
stem castors standard - locks provided on
front set.
DOORS
• 300 series stainless steel exterior with white
aluminum door liner to match cabinet
interior. Doors extend full width of cabinet
shell. Door locks standard.
• Positive seal self-closing doors. Lifetime
guaranteed door hinges and torsion type
closure system.
• Lifetime guaranteed recessed door handles
standard. Each door fitted with 12" (305
mm) long recessed handle that is foamed-inplace with a sheet metal interlock to insure
permanent attachment.
• Magnetic door gaskets of one piece
construction, removable without tools for
ease of cleaning.
MODEL FEATURES
• Exterior mounted temperature monitor.
• Evaporator is epoxy coated to eliminate the
potential of corrosion.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for final connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord and
plug set included.
115/60/1
NEMA-5-15R
OPTIONAL FEATURES/ACCESSORIES
 230 - 240V / 50 Hz.
 Three right or left hinges (no charge).
 6" (153 mm) stainless steel or
seismic legs.
 Additional shelves.
 Wine racks.
 Novelty baskets.
 Half and full door bun tray racks
accommodates 18" x 26" (458 mm x 661 mm)
sheet pans.
 Remote cabinets (condensing unit supplied
by others), consult factory technical service
department for BTU information.
SHELVING
• Nine (9) adjustable, heavy duty PVC coated
wire shelves 24 1/8"L x 22 3/8"D (613 mm x
569 mm). Four (4) chrome plated shelf clips
included per shelf.
• Shelf support pilasters made of same material
as cabinet interior; shelves are adjustable on
1/2" (13 mm) increments.
LIGHTING
• Incandescent interior lighting - safety
shielded. Lights activated by rocker switch
mounted above doors.
PLAN VIEW
781/8"
(1985 mm)
291/2"
791/16"
291/2"
(750 mm)
(750 mm)
(2009 mm)
5331/32"
841/16"
(1371 mm)
(2136 mm)
2415/32"
(622 mm)
FRONT VIEW
TOP VIEW
5"
(127 mm)
WARRANTY
METRIC DIMENSIONS ROUNDED UP TO THE
One year warranty on all parts
NEAREST WHOLE MILLIMETER
& labor and an additional 4 year
SPECIFICATIONS SUBJECT TO CHANGE
warranty on compressor.
WITHOUT NOTICE
(U.S.A. only)
KCL
Model
T-72
TRUE FOOD SERVICE EQUIPMENT
Front
Side
Plan
3D
TFEY01E
TFEY01S
TFEY01P
TFEY013
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
ITEM #18
Job Name
Item #
Food Service Equipment
Spec Sheet No. TR-5
Electric
HF-2E-120
HF-3E-120
HF-4E-120
HF-2E-208
HF-3E-208
HF-4E-208
HF-5E-208
HF-2E-240
HF-3E-240
HF-4E-240
HF-5E-240
Stainless Steel Well Models
HF-2E-120-SS
HF-3E-120-SS
HF-4E-120-SS
HF-2E-208-SS
HF-3E-208-SS
HF-4E-208-SS
HF-5E-208-SS
HF-2E-240-SS
HF-3E-240-SS
HF-4E-240-SS
HF-5E-240-SS
Accessories:
Portable Kit (5”casters, 2 locking & push handle) - Add Prefix PSolid tray Shelf - Models TTS-(2-5)
Tubular Tray Rail - Models TTR-(2-5)
Dish Shelf Add-On(mount under tray shelf)- Models TDS-(2-5)
Stainless End Shelf - Model BES-2
Double or Single Overshelf - Models TOS-(2-5) & STOS-(2-5)
Buffet Shelf - Model TBS-(2-5)
Serving Shelf - Model TSS-(2-5)
Aluminum Spillage Pans - Model SP-A
Stainless Steel Spillage Pans - Model SP-S
3 Phase wiring - Model 9072
HF-4E-120 Shown.
Specifications
Features
TOP: 20 gauge #302 stainless steel with die
stamped pan openings. (11.875” x 20.062”)
6’ electrical cord with plug
BODY: 22 gauge #430 stainless steel
LEGS: 18 gauge #302 stainless steel with fully
adjustable non marking tip
UNDER SHELF: 22 gauge #430 stainless steel
LINING: 8” deep 22 gauge galvanized steel or
Infinite control knobs
Indicator lights
Single phase wiring
500 Watt elements (120 volt)
750 Watt elements (208 volt)
1000 Watt elements (240 volt)
Fiberglass insulation between each compartment
#302 stainless steel lining (optional w/ -SS suffix)
CUTTING BOARD: 1” thick white thermoplastic
CUTTING BOARD BRACKETS: 16 gauge #302
stainless steel.
Freight Class 85
3125 Trotters Parkway
Alpharetta, GA 30004
www.suprememetal.com
Toll Free: 800-645-2526
770-740-6000
Fax: 770-740-6010
ITEM #18
D
C
B
TYP.
2.25"
A
22.625"
8"
PROVIDED WITH 6' CORD AND PLUG
D
22.625"
8"
C
HOLES FOR
OPTIONAL PUSH
HANDLE
B
A
13"
13.5" O.C.
34.125"
14.625"
CONTROL KNOB
CONTROL KNOBS
6.5"
SECTIONAL VIEW
ELEVATION VIEW
All dimensions are the same for the stainless steel wells option.
Model #
Length
# of Wells
Weight
Cubic Feet
NEMA Plug
True Amp Draw /
Watts per Unit
HF-2E-120
A = 31-13/16”
2
92
28.1
5-20P
8.33 / 1000
HF-3E-120
B = 47 1/8”
3
120
41.32
5-20P
12.5 / 1500
HF-4E-120
C = 62 7/16”
4
152
54.55
L5-30P
16.67 / 2000
HF-2E-208
A = 31-13/16”
2
92
28.1
6-20P
7.21 / 1500
HF-3E-208
B = 47 1/8”
3
120
41.32
6-20P
10.82 / 2250
HF-4E-208
C = 62 7/16”
4
152
54.55
6-20P
14.42 / 3000
HF-5E-208
D = 77 3/4”
5
170
66.94
L6-30P
18.03 / 3750
HF-2E-240
A = 31-13/16”
2
92
28.1
6-20P
8.33 / 2000
HF-3E-240
B = 47 1/8”
3
120
41.32
6-20P
12.5 / 3000
HF-4E-240
C = 62 7/16”
4
152
54.55
L6-30P
16.67 / 4000
HF-5E-240
D = 77 3/4”
5
170
66.94
L6-30P
20.83 / 5000
We reserve the right to modify specifications in line
with our policy of continuous product improvement.
NEMA PLUG 5-20P
NEMA PLUG 6-20P
NEMA PLUG L5-30P
NEMA PLUG L6-30P
© Supreme Metal 2005.
ITEM #19AIA #
Project Name:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Location:
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366
Item #:
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Parts Dept. (800)424-TRUE • Parts Dept. FAX# (636)272-9471
Model #:
Model:
Food Prep Table:
TSSU-72-18
Solid Door Sandwich/Salad Unit
SIS #
Qty:
TSSU-72-18
True’s salad/sandwich units are
designed with enduring quality
that protects your long term
investment.
Oversized, environmentally
friendly (134A) forced-air
refrigeration system holds 33°F
to 41°F (.5°C to 5°C).
Complies with and listed under
ANSI/NSF-7-1997-6.3.
All stainless steel front, top
and cabinet ends. Matching
aluminum finished back.
Stainless steel, patented, foam
insulated lid and hood keeps
pans’ temperature colder, locks
in freshness and minimizes
condensation. Removable for
easy cleaning.
11 3/4" (299 mm) deep full
length removable cutting
board included. Sanitary, high
density, NSF approved white
polyethylene provides tough
preparation surface.
Foamed-in-place, high density
polyurethane insulation (CFC
free).
Heavy duty PVC coated wire
shelves.
ROUGH-IN DATA
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
Capacity
(Cu. Ft.)
Model
TSSU-72-18
Doors
3
(liters)
19.0
Cabinet Dimensions
(inches)
Pans
Shelves (top)
6
18
538
†
*
(mm)
L
723/8
D†
301/8
H*
363/4
HP
1/2
Voltage
115/60/1
1839
766
934
1/2
230-240/50/1
NEMA
Amps Config.
10.5
5-15P
6.7
APPROVALS:
TM
MADE IN
U.S.A.
®
R
SINCE 1945
11/05
Printed in U.S.A.
(total m)
(kg)
7
425
2.13
193
▲ Plug type varies by country.
Depth does not include 1" (26 mm) for rear bumpers.
Height does not include 61/4" (159 mm) for castors or 6" (153 mm) for optional legs.
TRUE REFRIGERATION
▲
Crated
Cord
Length Weight
(total ft.) (lbs.)
AVAILABLE AT:
ITEM #19
Model:
Food Prep Table:
TSSU-72-18
Solid Door Sandwich/Salad Unit
STANDARD FEATURES
DESIGN
• True’s commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, lower utility costs, exceptional
food safety and the best value in today’s food
service marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained, capillary
tube system using environmentally friendly
(CFC free) 134A refrigerant.
• Oversized, factory balanced refrigeration
system with guided airflow to provide uniform
temperature in food pans and cabinet interior.
• Forced-air design holds 33˚F to 41˚F (.5˚C to 5˚C)
product temperature in food pans and cabinet
interior. Complies with and listed under ANSI/
NSF-7-1997-6.3.
• Condensing unit access in back of cabinet,
slides out for easy maintenance.
CABINET CONSTRUCTION
• Exterior - stainless steel front, top and cabinet
ends. Matching aluminum finished back.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless floor with
coved corners.
• Insulation - entire cabinet structure and solid
doors are foamed-in-place using high density,
CFC free, polyurethane insulation.
• 5" (127 mm) diameter stem castors - locks
provided on front set. 36" (915 mm) work
surface height.
DOORS
• Stainless steel exterior with white aluminum
liner to match cabinet interior.
• Each door fitted with 12" (305 mm) long
recessed handle that is foamed-in-place with
a sheet metal interlock to insure permanent
attachment.
• Positive seal self-closing doors with 90° stay
open feature (excludes center door). Doors
swing within cabinet dimensions.
• Magnetic door gaskets of one piece
construction, removable without tools for
ease of cleaning.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for final connection to a 115/60/1 phase
- 15 amp dedicated outlet. Cord and plug set
included.
SHELVING
• Six (6) adjustable, heavy duty PVC coated wire
shelves. Two (2) right and two (2) left door
shelf dimensions are 219/16"L x 16"D (548 mm x
407 mm). Two (2) center door shelf dimensions
are 231/2"L x 16"D (597 mm x 407 mm). Four
(4) chrome plated shelf clips included per shelf.
• Shelf support pilasters made of same material
as cabinet interior; shelves are adjustable on
1/2" (13 mm) increments.
115/60/1
NEMA-5-15R
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230 - 240V / 50 Hz.
❒ 6" (153 mm) standard legs.
❒ 6" (153 mm) seismic/flanged legs.
❒ 21/2" (64 mm) diameter castors.
❒ Additional shelves.
❒ Sandwich/salad service shelf.
❒ Single utility shelf.
❒ Double utility shelf.
❒ Sneezeguard.
❒ 19"(483 mm) deep, 1/2" (13 mm) thick,
white polyethylene cutting board. Requires
“L” brackets.
❒ 19" (483 mm) deep, 3/4" (20 mm) thick,
white polyethylene cutting board. Requires
“L” brackets.
❒ 113/4" (299 mm) deep, 1/2" (13 mm) thick,
composite cutting board. Requires “L”
brackets.
❒ 19" (483 mm) deep, 1/2" (13 mm) thick,
composite cutting board. Requires “L”
brackets.
❒ Crumb catcher. Requires crumb catcher cutting
board for proper installation.
❒ Pan dividers.
❒ ADA compliant model with 34" (864 mm) work
surface height.
❒ Remote cabinets (condensing unit supplied
by others; system comes standard with
404A expansion valve and requires R404A
refrigerant). Consult factory technical service
department for BTU information.
MODEL FEATURES
• Evaporator is epoxy coated to eliminate the
potential of corrosion.
• 117/8" (302 mm) deep, full length removable
cutting board. Sanitary, high-density, NSF
approved white polyethylene provides tough
preparation surface.
• Stainless steel, patented, foam insulated lid
and hood keeps pans’ temperature colder,
locks in freshness and minimizes condensation.
Removable for easy cleaning.
• Comes standard with 18 (1/6 size) 67/8"L x
61/4"W x 4"D (175 mm x 159 mm x 102 mm)
clear polycarbonate, NSF approved, food pans
in countertop prep area. Also accommodates
6"(153 mm) and 8"(204 mm) deep food pans.
• Countertop pan opening designed to fit
varying size pan configurations with available
pan divider bars. Varying size pans supplied by
others.
• NSF-7 compliant for open food product.
PLAN VIEW
5215/16"
(1345 mm)
301/16"
217/8"
(764 mm)
(556 mm)
185/16"
725/16"
(1837 mm)
117/32"
655/16"
(39 mm)
(1659 mm)
(466 mm)
515/32"
83/4"
(139 mm)
(223 mm)
103/4"
(274 mm)
61/8"
(156 mm)
4611/16"
4215/32"
(1079 mm)
7"
1"
(1186 mm)
(178 mm)
(26 mm)
293/4"
(756 mm)
363/4"
3515/16"
(934 mm)
(913 mm)
37/ 8"
125/8"
111/4" (321 mm)
(286 mm)
63/16"
ELEVATION
(158 mm)
WARRANTY
METRIC DIMENSIONS ROUNDED UP TO THE
One year warranty on all parts
NEAREST WHOLE MILLIMETER
& labor and an additional 4 year
SPECIFICATIONS SUBJECT TO CHANGE
warranty on compressor.
WITHOUT NOTICE
(U.S.A. only)
25/16"
(99 mm)
(59 mm)
RIGHT VIEW
KCL
PAN LAYOUT
Model
Elevation
Right
Plan
3D
TSSU-72-18
TFNY09E
TFNY09S
TFNY09P
TFNY093
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
ITEM # 21, 22, 23

Item# _______________________________________________
WIRE SHELVING
• Unique Design: The open wire design of these
heavy-gauge carbon-steel or stainless steel
shelves minimizes dust accumulation and allows a
free circulation of air, greater visibility of stored
items and greater light penetration.
• Versatile Construction: Super Erecta Shelf® wire
shelving can change as quickly as your needs
change. By using various accessories, hundreds
of shelving configurations become possible.
Wire Shelving
SUPER ERECTA SHELF®

Job _________________________________________________
• Fast, Secure Assembly: SiteSelect™ Posts with
the triple-groove visual guide feature, have circular
grooves at 1" (25mm) intervals and are numbered
at 2" (50mm) intervals. A patented, tapered split
sleeve (plastic or aluminum) snaps together
around each post. Tapered openings in the shelf
corners slide over the tapered split sleeves
providing a positive lock. Shelf is assembled in
minutes without the use of any special tools.
• Shelf Ribs: Run front to back, allowing you to
slide items on and off shelves smoothly.
• Shelf Accessibility: Shelves can be
loaded/unloaded easily from all sides. This open
construction allows use of maximum storage
space of cube.
• Adjustability: Shelves can be adjusted at 1”
(25mm) intervals along the entire length of the
post.
• Durable: Super Erecta Shelf® wire shelving is
available in four options: Super Erecta Brite™,
chrome-plated, stainless steel and Metroseal™.
• Adjustable Feet: Bolt levelers compensate for
surface irregularities.
10.01
Copyright © 1993 InterMetro Industries Corporation

InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
Copyright © 1997 Metropolitan Wire Corp.
10.01
ITEM # 21, 22, 23
Job____________________________________________
SUPER ERECTA SHELF®
WIRE SHELVING
WIRE SHELVES
Split Sleeves
SUPER ERECTA SHELF meets U.S.
Government Specifications MIL-S40144E.
PLATED SHELVING has clear
protective coating.
For load capacity guidelines, ask your
InterMetro representative for a copy of
“Helpful Hints.”
Approx.
Width
Length
Pkd. Wt.
Cat. No.
Cat. No.
Cat. No.
(in.) (mm)
(in.) (mm)
(lbs.) (kg) Super Erecta Brite
Chrome
Stainless
________________________________________________________________________
14 355
24 610
6
2.7
1424BR
1424NC
1424NS
________________________________________________________________________
14 355
30 760
7
3.2
1430BR
1430NC
1430NS
________________________________________________________________________
14 355
36 910
8
3.6
1436BR
1436NC
1436NS
________________________________________________________________________
14 355
42 1060
91/2
4.3
1442BR
1442NC
1442NS
________________________________________________________________________
1
14
355
48
1220
10
/2 4.7
1448BR
1448NC
1448NS
________________________________________________________________________
14 355
60 1525
14
6.3
1460BR
1460NC
1460NS
________________________________________________________________________
14 355
72 1825
17
7.7
1472BR
1472NC
1472NS
________________________________________________________________________
18 455
24 610
7
3.2
1824BR
1824NC
1824NS
________________________________________________________________________
18 455
30 760
8
3.6
1830BR
1830NC
1830NS
________________________________________________________________________
18 455
36 910
91/2
4.3
1836BR
1836NC
1836NS
________________________________________________________________________
18 455
42 1060
11
5.0
1842BR
1842NC
1842NS
________________________________________________________________________
18 455
48 1220
12
5.4
1848BR
1848NC
1848NS
________________________________________________________________________
18 455
54 1370
141/2 6.6
1854BR
1854NC
1854NS
________________________________________________________________________
18 455
60 1525
17
7.7
1860BR
1860NC
1860NS
________________________________________________________________________
18 455
72 1825
20
9.1
1872BR
1872NC
1872NS
________________________________________________________________________
21 530
24 610
8
3.6
2124BR
2124NC
2124NS
________________________________________________________________________
21 530
30 760
9
4.1
2130BR
2130NC
2130NS
________________________________________________________________________
21 530
36 910
11
5.0
2136BR
2136NC
2136NS
________________________________________________________________________
21 530
42 1060
12
5.4
2142BR
2142NC
2142NS
________________________________________________________________________
21 530
48 1220
14
6.4
2148BR
2148NC
2148NS
________________________________________________________________________
21 530
54 1370
16
7.6
2154BR
2154NC
2154NS
________________________________________________________________________
21 530
60 1525
18
8.2
2160BR
2160NC
2160NS
________________________________________________________________________
21 530
72 1825
24
10.9
2172BR
2172NC
2172NS
________________________________________________________________________
24 610
24 610
9
4.1
2424BR
2424NC
2424NS
________________________________________________________________________
24 610
30 760
11
5.0
2430BR
2430NC
2430NS
________________________________________________________________________
24 610
36 910
13
5.9
2436BR
2436NC
2436NS
________________________________________________________________________
24 610
42 1060
15
6.8
2442BR
2442NC
2442NS
________________________________________________________________________
24 610
48 1220
16
7.3
2448BR
2448NC
2448NS
________________________________________________________________________
24 610
54 1370
18
8.6
2454BR
2454NC
2454NS
________________________________________________________________________
24 610
60 1525
21
9.5
2460BR
2460NC
2460NS
________________________________________________________________________
24 610
72 1825
26
11.8
2472BR
2472NC
2472NS
________________________________________________________________________
NOTE: For Metroseal shelving information see sheet No. 10.10.
SiteSelect™ Posts
“S” Hooks
Approx.
Height*
Pkd. Wt.
Cat. No. Cat. No.
(in.)
(mm) (lbs.) (kg)
Plated Stainless
___________________________________________
75/8
190
1/2
0.2
7P
___________________________________________
141/2
368
1
0.5
13P
13PS
___________________________________________
281/2
724
13/4
0.75
27P
27PS
___________________________________________
341/2
876
2
0.9
33P
33PS
___________________________________________
549/16
1386
3
1.4
54P
54PS
___________________________________________
629/16
1589
31/2
1.6
63P
63PS
___________________________________________
745/8
1895
4
1.8
74P
74PS
___________________________________________
865/8
2200
5
2.3
86P
86PS
___________________________________________
Used to “add-on”
shelving units
with only two
posts required.
Cat. No. 9995Z
SiteSelect™
Posts are
grooved at 1"
(25mm)
increments and
numbered at 2"
(50mm)
increments.
Posts are triplegrooved every 8"
(203mm) for
easy
identification.
*Height includes leveling bolt and cap.
Important: When ordering by components remember that stability decreases as the ratio of height to width increases. Units should be kept
as wide and low as possible. With 14” shelving, foot plates should be used and secured to the floor on free-standing units; on mobile units,
maximum post height is 54”.
Manufactured by:
InterMetro Industries Corp.
North Washington Street
Wilkes-Barre, PA 18705
Phone 717-825-2741
FAX 717-825-2852
For Product Information, call 1-800-433-2232
For Customer Service, call 1-800-992-1776

Wire Shelving


InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
L02-006
Rev. 3/98 BJ
Printed in U.S.A.
Information and specifications are subject to change
without notice. Please confirm at time of order.
ITEM #26
STAINLESS STEEL
SERVICE & MOP SINKS
ITEM #27
Item #:
Floor Mounted
Qty #:
Model #:
Project #:
FEATURES:
Floor mounted unit eliminates the need of lifting heavy containers.
No-Drip die formed recessed V-edge on three sides with a tile edge
furnished on the rear.
Sink Bowl is seamless and is Deep Drawn designed.
Deep Drawn bowls having large liberal radii with a minimum of 3” and
rectangular in design for increased capacity.
9-OP-20
CONSTRUCTION:
All TIG welded.
Welded areas blended to match adjacent surfaces and to a satin finish.
MATERIAL:
Heavy gauge type “304” series stainless steel.
9-OP-20 shown with optional
faucet, hose & hanger
9-OP-40
FEATURES:
Conventional
Economy
8-OP-16
4-OP-18
Leg mounted design.
High back splash.
8-OP-16 feature seamless, one piece bowl Deep Drawn design.
Deep Drawn bowls having large liberal radii with a minimum of 3” and
rectangular in design for increased capacity.
CONSTRUCTION:
All TIG welded.
Welded areas blended to match adjacent surfaces and to a satin finish.
MATERIAL:
Heavy gauge type “304” series stainless steel.
K-240
K-242
REQUIRED
ACCESSORIES
Service Faucet
Mop Hanger
Hose & Bracket
Utility Shelf
Utility Shelf
K-245 & K-246
www.advancetabco.com
Model #
Qty
K-240
K-242
K-244
K-245
K-246
K-244
NEW YORK
GEORGIA
TEXAS
NEVADA
(800) 645-3166
(800) 832-1218
(800) 527-0353
(800) 446-8684
Fax: (631) 242-6900
Fax: (770) 775-5625
Fax: (972) 932-4795
Fax: (775) 972-1578
For Assistance
For Assistance
with with
SMART ENGINEERING
RESPONSE
TEAM
631-586-2933
1-800-498-6634
Fax:
Modifications
& Accessories
Smart Smart
Modifications
& Accessories
Call: Call: 1-800-498-6634 smartfab@advancetabco.com
Fax: 631-586-2933 sert@advancetabco.com
E-4
ITEM #27
DIMENSIONS
TOL Overall: ± .500”
Interior: ± .250”
ALL DIMENSIONS ARE TYPICAL
SUGGESTED INSTALLATION
9-OP-20:
9-OP-28:
9-OP-40:
9-OP-48:
1"
10 2
16” x 20” x 6” Bowl with 10” Overall Height.
20” x 28” x 6” Bowl with 10” Overall Height.
16” x 20” x12” Bowl with 16” Overall Height.
20” x 28” x 12” Bowl with 16” Overall Height.
12 1 "
2
21"
CL
25"
CL
33"
25"
9-OP-20
9-OP-40
9-OP-28
9-OP-48
2" IPS Pipe
3"
24
MOP SINK DRAIN ASSEMBLY
Flat Strainer Plat
Interior Compression Ring
Exterior Thread
Interior Thread
Interior Rubber Bladder
Rubber Gasket
Fiber Washer
Die Cast Nut
8-OP-16
4-OP-18
CONVENTIONAL DESIGN
ECONOMY DESIGN
1 1/2" IPS
E-4a
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, JANUARY 2005
ITEM #28
ITEM #30
OPTION
OPTION
B-425
B-426
B-428
B-427
B-429
OPTION
ITEM
#29
RELIABILITY
BUILT IN
COMPLIANT
ITEM
#31
RELIABILITY
BUILT IN
COMPLIANT
ITEM #32, 33
Universal Dispensers That Always Work...
With Any Towel, Tissue or Soap • In Any End User Location • Year After Year
Multiple options in towel, tissue and soap
dispensers for any paper or end user application
Product Improvements Incorporated
into New Fresh Design
Universal to any brand or basis weight of paper
Dispensers that complement any environment;
including industrial and high image
Universal waffle key for all models
Smooth, updated design maintains
a cleaner appearance
Infinity Systems® in many items eliminate
stub roll waste
New, improved design for easier
loading of paper
Proven reliability and recognized worldwide
for quality dispensing
New, improved hinge system
Ideal applications include: institutions,
restaurants, industrial, stadiums, kitchens, etc.
555 Koopman Lane Elkhorn, Wisconsin 53121 USA
T: +1 (262) 723-6133 F: +1 (262) 723-4204
Customer Care: (800) 248-9826
Email: sanjamar@sanjamar.com
www.sanjamar.com
SAN JAMAR EUROPE, INC.
Schoorstraat 26A, Bus 1
B-2220 Heist Op Den Berg BELGIUM
T: +32 15 228140 F: +32 15 228148
E-Mail: sjeurope@sanjamar.com
To learn more about the Classic Family and other quality innovations from San Jamar,
visit www.sanjamar.com or call 800-248-9826 • 262-723-6133
Smart System Electronic Touchless Roll Towel Dispenser
NEW &
IMPROVED
FRESH
DESIGN
• Universal and dispenses all paper qualities.
• Infinity® System provides continual availability of paper; eliminate stub roll waste.
• Simple paper length and delay pre-set buttons for portion control.
• EZ-Operation-just tear and dry!
Construction: Break-resistant plastic
Tear-N-Dry™ Electronic Touchless Roll Towel Dispenser
NEW &
IMPROVED
FRESH
DESIGN
• Universal and dispenses all paper qualities.
• Infinity® System provides continual availability of paper; eliminate stub roll waste.
• No adjustment necessary; just mount and go.
• Standard 10" (254mm) potion without a wait every time.
• EZ-Operation-just tear and dry!
Construction: Break-resistant plastic
Savvy® Lever Roll Towel Dispenser
NEW &
IMPROVED
FRESH
DESIGN
• Universal and dispenses any quality paper.
• Easy to change parts and drive module.
• Bio-Pruf®* treated handle inhibits bacterial growth.
• T1100-Available stub roll compartment.
• T1200-Auto-transfer device allows complete usage of stub roll; limited 5 year warranty on drive modules.
T1400TBK
- T1400TBL
ITEM
#32,
33
Capacity: (1) 8” (200mm) wide; 812⁄ ” (215mm) dia. roll
& (1) 4” (100mm) stub roll
Dimensions: 151⁄2”h x 121⁄2”w x 95⁄8”d (394h x 318w x 244d mm)
Case Pack: 1
T1300TBK - T1300TBL
Capacity: (1) 8” (200mm) wide; 812⁄ ” (215mm) dia. roll
& (1) 4” (100mm) stub roll
Dimensions: 151⁄2”h x 121⁄2”w x 95⁄8”d (394h x 318w x 244d mm)
Case Pack: 1
T1100TBK - T1100TBL - T1100WH
T1200TBK-T1200TBL
Capacity: (1) 8” (200mm) wide; 812⁄ ” (215mm) dia. roll
& (1) up to 4” (100mm) stub roll
Dimensions: 151⁄2”h x 13”w x 95⁄8”d (394h x 330w x 244d mm)
Case Pack: 1
Construction: Break-resistant plastic
T850TBK - T850TBL - T850WS
Integra™ Lever Roll Towel Dispenser
• Dispenses with push of the lever and loads in one easy step.
• Unique modern design with integrated lever minimizes needed space.
• Holds all roll paper qualities with any size core, including coreless and solid.
Capacity: ALL paper qualities with any size core from
8½” (215mm) diameter, 8¼” (209mm) wide
Dimensions: 13½”h x 11½”w x 11¼”d (342h x 292w x 285d mm)
Case Pack: 1
Construction: Break-resistant plastic
Centerpull Towel Dispenser
T400TBK - T400TBL
• Larger capacity ensures longer intervals between refills.
• Dispenses single sheets of centerpull towels for reliable portion control.
• Eliminates cross-contamination.
Capacity: (1) 912⁄ ” (241mm) wide roll; 9” (230mm) dia. roll
Dimensions: 1158⁄ ”h x 918⁄ ”w x 912⁄ ”d
(295h x 232w x 241d mm)
Case Pack: 1
Construction: Break-resistant plastic
Ultrafold C-fold/Multifold Towel Dispenser
T1700TBK - T1700TBL
• Universal and dispenses any brand or quality of multifold towel.
• Present® System offers a seamless and professional towel presentation.
• Attractive, smooth finish.
Capacity: 450 C-Fold or 700 Multifold towels
Dimensions: 18”h x 1134⁄ ”w x 614⁄ ”d (457h x 298w x 159d mm)
Case Pack: 5
Construction: Break-resistant plastic
Mini Ultrafold C-fold/Multifold Towel Dispenser
• Universal and dispenses any brand or quality of multifold towel.
• Present® System offers a seamless and professional towel presentation.
• Ideal for tight fitting applications.
• Optional adhesive back great for mounting on mirrors to replace towel baskets.
• Attractive, smooth finish.
Construction: Break-resistant plastic
Twin 9" (230mm) JBT Dispenser
• Slimmer profile design uses minimal space and is universal for all markets.
• Sliding panel prevents access to spare roll until first roll is completely depleted.
• Continual paper provided by the Infinity® System; eliminates stub roll waste.
Construction: Break-resistant plastic
Reserva® 9-10½ (230-270mm) JBT Dispenser
• Universal and dispenses any brand or quality of tissue.
• Continual paper provided by the Infinity® System; eliminates stub roll waste.
• Accommodates multiple size cores and tissue up to 1012⁄ ” (270mm) JBT
with 5” (127mm) stub roll.
Construction: Break-resistant plastic
Quantum® 12-13" (305-330mm) JBT Dispenser
• Universal and dispenses any brand or quality of tissue.
• Continual paper provided by the Infinity® System; eliminates stub roll waste.
• Ideal for high traffic washrooms; accommodates all brands up to 13” (330mm)JBT
with 7” (180mm) stub roll.
Construction: Break-resistant plastic
NEW &
IMPROVED
FRESH
Single 9" (230mm) JBT Dispenser
• Universal; accommodates all brands of 9-1012⁄ ” (230-250mm) Jumbo Bath Tissue.
• Full swing cover prevents breakage and allows easy servicing access
DESIGN
Construction: Break-resistant plastic
Single 12" (305mm) JBT Dispenser
NEW &
IMPROVED
FRESH
• Universal; accommodates all brands of up to 12” (305mm) Jumbo Bath Tissue.
• Full swing cover prevents breakage and allows easy servicing access
DESIGN
Construction: Break-resistant plastic
VERSATWIN® Standard Bath Tissue Dispenser
• Contemporary design saves space and mounts in any position.
• Universal; accommodates standard toilet tissues up to 512⁄ ” (140mm).
• Continual paper provided by the Infinity® System; eliminates stub roll waste.
Construction: Break-resistant plastic
Duett Standard Bath Tissue Dispenser
• Protects visible fresh roll until first roll is completely used.
• Universal; accommodates standard toilet tissues up to 512⁄ ” (140mm).
• Continual paper provided by the Infinity® System; eliminates stub roll waste.
Construction: Break-resistant plastic
Universal Bulk Soap Dispensers
R4000TBK - R4000TBL
Capacity: (2) 9” (230mm) JBT rolls
Dimensions: 12”h x 19”w x 514⁄ ”d (305h x 483w x 133d mm)
Core Diameter: Min. 3¼” (83mm)
Case Pack: 4
R3000TBK - R3000TBL
Capacity: (1) JBT roll 9-101⁄2” (230-270mm)
& (1) 5” (127mm) stub roll
Dimensions: 1312⁄ ”h x 1612⁄ ”w x 558⁄ ”d (344h x 419w x 144d mm)
Core Diameter: Min. 3¼” (83mm)
Case Pack: 4
R6500TBK - R6500TBL
Capacity: (1) 13” (330mm) JBT roll
& (1)7” (180mm) stub roll
Dimensions: 161⁄2”h x 22”w x 57⁄8”d (419h x 559w x 149d mm)
Core Diameter: Min. 3¼” (83mm)
Case Pack: 1
R2000TBK - R2000TBL
Capacity: (1) JBT roll 9-1012⁄ ” (230-270mm)
Dimensions: 11”h x 191⁄8”w x 51⁄2”d (302h x 278w x 143d mm)
Core Diameter: Min. 3¼” (83mm)
Case Pack: 6
R6000TBK - R6000TBL
Capacity: (1) JBT roll 12” (305mm)
Dimensions: 149⁄10”h x 129⁄10”w x 54⁄5”d (378h x 328w x 147d mm)
Core Diameter: Min. 3¼” (83mm)
Case Pack: 6
R3600TBK - R3600TBL
Capacity: (2) rolls 412⁄ -512⁄ ” (115-140mm)
Dimensions: 81⁄4”h x 121⁄4”w x 53⁄4”d (210h x 311w x 146d mm)
Core: Min. 11⁄2” (38mm)
Case Pack: 6
R3500TBK - R3500TBL
Capacity: (2) rolls 412⁄ -512⁄ ” (115-140mm)
Dimensions: 123⁄4”h x 71⁄2”w x 7”d (324h x 191w x 178d mm)
Core: Min. 15⁄8” (40mm)
Case Pack: 6
S30TBK/S30TBL - S46TBK/S46TBL
• High capacity for either liquid soaps or hand lotions.
• Large push bar allows for easy dispensing.
• Meets ADA requirements.
Construction: High-impact plastic
*Bio-Pruf is a trademark of Rohm and Haas Company.
T1750TBK - T1750TBL - T1750WH
Capacity: 240 C-Fold or 400 Multifold towels
Dimensions: 11½”h x 11½”w x 6”d
(292h x 292w x 152d mm)
Case Pack: 1
Capacity: 30oz; 46oz (0.9L; 1.4L)
Dimensions: 618⁄ ”h x 418⁄ ”w x 414⁄ ”d (156h x 105w x 108d mm);
818⁄ ”h x 538⁄ ”w x 414⁄ ”d (206h x 137w x 180d mm)
Case Pack: 6
Z030929E
GSW Inc.-- Restaurant Equipment, Stainless Steel Sinks, NSF Faucets, Lockers
ITEM #32
Product Search
About Us
Search
Hand Sink >> Wall Mount Hand Sink >> Order No. HS-1217SS
Sales Terms
Space Saver Wall Mount Hand Sink
Cart
Order No. HS-1217SS
Caster
12.0 lbs/case
1 pcs/case
Cookware
w/ Welded Splash Guards, 12-1/2"W x 17-1/4"L, 1-7/8" Strainer Opening
Diffuser
Dish Table
Manufacturer: Allstrong Restaurant Equipment, Inc.
(Model No. S1B0912-C)
Donut Table
Equipment Stand
Faucet
Hand Sink
Hardware
●
●
●
Special polished satin finish
20 gauge type 304 stainless steel
Gooseneck faucet, S/S basket strainer included
Janitorial
Locker
Pan Rack
Plumbing
Scale
Shelving
Sign
Sink
Sink Bowl
Wok Range
Work Table
WWW.GSW-USA.COM, 1-800-897-5999
Copyright GSW Inc. All rights reserved.
http://www.gsw-usa.com/item.php?category=Hand_Sink&title=Wall_Mount_Hand_Sink&model=HS-1217SS [12/18/2007 10:27:40 AM]
STAINLESS STEEL
PASS-THRU SHELVES
ITEM #36
Item #:
Qty #:
Model #:
Project #:
“L”
BRACKET
CANTILEVER
BRACKET
18” WIDE
24” WIDE
Length
PA-18-48*
PA-18-60*
PA-18-72*
PA-18-84*
PA-18-96*
PA-18-120*
PA-18-132*
PA-18-144*
PA-24-48**
PA-24-60**
PA-24-72**
PA-24-84**
PA-24-96**
PA-24-120**
PA-24-132**
PA-24-144**
48”
60”
72”
84”
96”
120”
132”
144”
FEATURES:
New Hat Channel design allows shelf to be freely positioned
Includes Wall Mounting Brackets for Securing Shelf to Desired Position
Furnished with 1-1/2” sanitary roll down along length.
Ends are square with 1-1/2” turn down at wall dimension.
CONSTRUCTION:
All TIG welded. Exposed welded areas polished to match
adjacent surface.
MATERIAL:
*L Brackets (2) included with 18” wide shelves.
Heavy Gauge Stainless Steel Shelf and Brackets.
** Cantilever Brackets included with 24” wide shelves.
Heavy Gauge Galvanized Hat Channel.
www.advancetabco.com
NEW YORK
GEORGIA
TEXAS
NEVADA
(800) 645-3166
(800) 832-1218
(800) 527-0353
(800) 446-8684
Fax: (631) 242-6900
Fax: (770) 775-5625
Fax: (972) 932-4795
Fax: (775) 972-1578
For Assistance with
Smart Modifications & Accessories Call:
1-800-498-6634 Fax: 631-586-2933
smartfab@advancetabco.com
M-1
DETAILS and SPECIFICATIONS
TOL ± .500”
ITEM #36
ALL DIMENSIONS ARE TYPICAL
“L” Bracket
11"
2
"L"
"W"
Top View of Shelf
ll
Wa
Cantilever
Brackets
2" x 4" “L” Mounting Bracket
Supplied with 18” Shelf
"L" Bracket Detail
ll
Wa
Cantilever Mounting Bracket
Supplied with 24” Shelf
11"
2
Wall
Cantilever Bracket Detail
NOTE: SURFACE OF PASS-THRU SHELF
IS 1-1/2” ABOVE WALL OPENING
M-1a
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, DECEMBER 2005
ITEM #37
S-Series 450
Ice Cube Machine
S-Series 450
Ice Machine on B-400 Bin
ANITATION
We've made it
simple to clean
AVINGS
The perfect balance of
power and efficiency
OUND
Designed to run
whisper-quiet
ERVICEABILITY
Easy access means
less downtime
• Up to 450 lbs. (204 kgs.)
daily ice production
• Only 30" (76.20 cm) wide
• Removable water distribution
tube with no tools
• Food zone designed with
soft, round, cove corners
• Patented cleaning and
sanitizing technology
• Select components made
with AlphaSan antimicrobial
• Hinged front door for easy access
• Warranty
5-year parts and 5-year labor
coverage on ice machine evaporator
5-year parts and 3-year labor
coverage on ice machine compressor
3-year parts-and-labor coverage
on all other ice machine, dispenser,
and storage bin components
America's #1 Selling Ice Machine
Ice Cube & Flake Machines • Ice Storage Bins • Ice Dispensers
ISO 9001: 2000
Quality System
Certified
ITEM #37
Manitowoc S-Series 450
Cube size
Ice production 24 hours
lbs.
kgs.
lbs. kgs.
24-HOUR PRODUCTION †
AIR-COOLED UNIT
W AT E R - C O O L E D U N I T
Power
kWh/100 lbs.
SD-0452A
dice
380
173
7.3
SD-0453W
dice
420
191
6.1
SY-0454A
half-dice
380
173
7.3
SY-0455W
half-dice
420
191
6.1
Water usage/100 lbs./45.4 kgs. of Ice
Potable Water: 18 gallons, 68 liters • Water-cooled Condenser: 200 gallons, 757 liters
Order ice storage bin separately. “A” or “W” following model number indicates “Air” or “Water” condensing unit. Ice storage
bin must be ordered separately.
Certified in Accordance with ARI Automatic Commercial Ice-Cube Machines
(Batch-Type) Certification Program, which is based on ARI Standard 810
air temp
˚F
˚C
70˚
21˚
80˚
27˚
90˚
32˚
water temp
50˚
10˚
450
204
430
195
410
186
70˚
21˚
420
191
400
181
380
173
air temp
90˚
32˚
390
177
370
168
350
159
• Ambient Temperature Range:
Air and water:
35˚ to 110˚F (1.6˚ to 43.3˚C)
Remote: -20˚ to 120˚F (-29˚ to 49˚C)
• Water Temperature Range:
35˚ to 90˚F (1.6˚ to 32.2˚C)
• Water Pressure Ice Maker
Water In:
Min. 20 psi (137.9 kPA)
Max. 80 psi (551.1 kPA)
• Condenser Inlet Water In:
(Water cooled only)
Min. 20 psi (137.9 kPA)
Max. 150 psi (1,034.2 kPA)
®
C
US LISTED
90˚
32˚
400
181
390
177
380
172
Height
Width
Depth
Bin
Storage
S-450
B-400
S-450
B-570
59.50"
151.13 cm
30.00"
76.20 cm
34.00"
86.30 cm
290 lbs.
131.7 kgs.
71.50"
181.61 cm
30.00"
76.20 cm
34.00"
86.30 cm
430 lbs.
195.2 kgs.
Height includes adjustable bin legs 6.00" to 8.00", (15.24 to 20.32 cm) set at 6.00" (15.24 cm). For comparison purposes
multiply ARI capacity by 1.3 (30%) to arrive at approximate “Application Rating Capacity.”
FRONT
FILTER
S-450 on B-400
Storage Bin
Air-cooled
AuCS®SI Accessory
21.50"
(54.6 cm)
Automatic Cleaning
System purchased
factory installed in
the machine or as an
option for field retrofit.
A
B
C
D
2 Cube Sizes Available
F
Half Dice
E
32.00"
(81.30 cm)
3
⁄8" x 11⁄8" x 7⁄8"
(.95 x 2.86 x 2.22 cm)
Dice
G
7
⁄8" x 7⁄8" x 7⁄8"
(2.22 x 2.22 x 2.22 cm)
Guardian® Accessory
Slime Inhibitor
with Ice Sentry
sachet refill.
Sachet holder
standard in
S-Series
machine.
A Electrical Entrance (2) Options
B 3/8" (0.95 cm) F.P.T. Water Condenser Inlet
(water-cooled units)
C 1/2" (1.27 cm) F.P.T. Water Condenser Outlet
(water-cooled units)
D
E
F
G
1/2" (1.27 cm) Auxillary Base Drain Socket
3/8" (0.95 cm) F.P.T. Ice Making Water Inlet
1/2" (1.27 cm) F.P.T. Ice Making Water Drain
3/4" (1.91 cm) Bin Drain
2987
BTU Per Hour:
7,000 (average) 9,600 (peak)
Compressor:
Nominal rating: 3/4 HP
Cupra-Nickel Condenser:
(Water-cooled models)
Adds protection from
corrosive water elements.
Operating Limits:
Air Flow Top View
70˚
21˚
440
200
430
195
420
191
†Production for Dice and Half Dice cubes. Data is published for 60 Hz machines. 50 Hz machines produce approximately 7% less ice.
115/60/1 standard. (208-230/60/1 and 230/50/1 also available.)
Min. circuit ampacity: Air-cooled — 13.6 amps
Water-cooled — 12.9 amps
Max. fuse size: Air-cooled, Water-cooled, Remote — 20 amps
HACR-type circuit breakers can be used in place of fuses.
Specifications
50˚
10˚
470
213
460
209
450
204
Space-Saving Designs
Ice Machine Electric
water temp
˚F
˚C
70˚
21˚
80˚
27˚
90˚
32˚
©2004 Manitowoc 6/04 Continuing product improvement may necessitate change of specifications without notice.
Model
Installation Note - Minimum Installation Clearance: Top/Sides are 8" (20.32 cm),
Back is 5" (12.7 cm).
MANITOWOC ICE, INC.
2110 South 26th Street, P.O. Box 1720
Manitowoc, WI 54221-1720, USA
Ph: 920-682-0161 • Fax: 920-683-7589
Visit us online at www.manitowocice.com