Christie QuadHD84 User manual

QuadHD84
User Manual
020-000671-01
NOTICES
COPYRIGHT AND TRADEMARKS
Copyright © 2013 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
REGULATORY
The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is
operated in a commercial environment. The product generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at the user’s own expense.
CAN ICES-3 (A) / NMB-3 (A).
이기기는업무용 (A 급)으로전자파 적합 등록을한기기이 오니판매자또는사용자는이점을주의하시기바라며,
가정외의지역에서사용하는것을목적으로합니다.
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur
which may not be reflected in this document. Christie reserves the right to make changes to specifications at any time
without notice. Performance specifications are typical, but may vary depending on conditions beyond Christie’s control
such as maintenance of the product in proper working conditions. Performance specifications are based on information
available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not
limited to, implied warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for
incidental or consequential damages in connection with the performance or use of this material.
The product is designed and manufactured with high-quality materials and components that can be recycled and reused.
This symbol
means that electrical and electronic equipment, at their end-of-life, should be disposed of separately
from regular waste. Please dispose of the product appropriately and according to local regulations. In the European
Union, there are separate collection systems for used electrical and electronic products. Please help us to conserve the
environment we live in!
Canadian manufacturing facility is ISO 9001 and 14001 certified.
GENERAL WARRANTY STATEMENTS
For complete information about Christie’s limited warranty, please contact your Christie dealer. In addition to the other
limitations that may be specified in Christie’s limited warranty, the warranty does not cover:
a. Problems or damage occurring during shipment, in either direction.
b. Projector lamps (See Christie’s separate lamp program policy).
c. Problems or damage caused by use of a projector lamp beyond the recommended lamp life, or use of a lamp
supplied by a supplier other than Christie.
d. Problems or damage caused by combination of a Product with non-Christie equipment, such as distribution
systems, cameras, video tape recorders, etc., or use of a Product with any non-Christie interface device.
e. Problems or damage caused by the use of any lamp, replacement part or component purchased or obtained
from an unauthorized distributor of Christie lamps, replacement parts or components including, without limitation,
any distributor offering Christie lamps, replacement parts or components through the internet (confirmation of
authorized distributors may be obtained from Christie).
f. Problems or damage caused by misuse, improper power source, accident, fire, flood, lightening, earthquake or
other natural disaster.
g. Problems or damage caused by improper installation/alignment, or by equipment modification, if by other than
Christie service personnel or a Christie authorized repair service provider.
h. Problems or damage caused by use of a Product on a motion platform or other movable device where such
Product has not been designed, modified or approved by Christie for such use.
i. Problems or damage caused by use of a projector in the presence of an oil-based fog machine.
j. For LCD projectors, the warranty period specified applies only where the LCD projector is in “normal use.” “Normal
use” means the LCD projector is not used more than 8 hours a day, 5 days a week. For any LCD projector where
“normal use” is exceeded, warranty coverage under this warranty terminates after 6000 hours of operation.
k. Image retention on LCD flat panels.
l. Failure due to normal wear and tear.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your product. Please see the
Maintenance section for specific maintenance items as they relate to your product. Failure to perform maintenance as
required, and in accordance with the maintenance schedule specified by Christie, will void the warranty.
Important Precautions
Please read these safety precautions carefully before using the display.
Warning
Failure to follow those warnings may result in death, serious injury
or damage to the display or other property.
Electrical Power Related Precautions
Warning
n Use only the power cord supplied with the unit or another manufacturer’s authorized cord.
- Failure to do so may result in fire or electrical shock or damage to the display.
n Use only a properly grounded plug and receptacle.
- If you do not, you may be electrocuted or injured. Or the display might be damaged.
n Do not use a damaged or loose plug.
- This may cause electrical shock or fire.
n Operate the display only from a power source (i.e. voltage) indicated in the product
specification.
- Otherwise, the display can be damaged, fire can occur or you may be electrocuted. If you are not
sure what type of power supply you have, consult a certified electrician.
n In the presence of thunder and lightning, never touch the power cord and signal cable because
it can be very dangerous.
- It can cause electric shock.
n Do not connect several extension cords, electrical appliances or electrical heaters to a single
outlet. Use a power bar with a grounding terminal designed for exclusive use with the display.
- A fire can break out due to overheating.
n Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with
dust, dry the power plug completely or wipe dust off before plugging in the cord.
- You may be electrocuted due to excess moisture.
n If you do not intend to use the display for a long time, unplug the power cord from the display.
- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock
or fire.
n Insert the power plug firmly so it cannot come loose.
- A loose connection can cause fire. Hold the plug when pulling out the power cord.
n Do not pull the plug out by the wire. Do not bend the power cord with excessive force or put
heavy objects on the power cord.
- The power line can be damaged, which may cause electric shock or fire.
n Do not insert metal or other conductive materials into the display openings. Additionally, do
not touch the power cord right after plugging the cable into the wall input terminal.
- You may be electrocuted.
n The power supply cord is used as the main disconnection device. The socket-outlet shall be
installed near the equipment and shall be easily accessible.
n Do not unplug the power cord while the display is in use.
- Electrical shock can damage the product.
n As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC
power source even if the unit is turned off.
1
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
Important Precautions
Precautions in Installing the Display
Warning
n Keep away from heat sources like heaters or open flames.
- Electrical shock, fire, malfunction or deformation may occur.
n Keep the packing anti-moisture material or vinyl packing out of the reach of children.
- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and
visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of
children.
n Do not put heavy objects on the display or sit upon it.
- If the display collapses or is dropped, you may be injured. Children must pay particular attention.
n Do not leave the power or signal cable where someone can trip over it.
- The passerby can falter, which can cause electrical shock, fire, display breakdown, or injury.
n Install the display in a neat and dry place. Do not use near water.
- Dust or moisture can cause electrical shock, fire, or display damage.
n Do not add accessories that have not been designed for this display.
n If you smell smoke or other odors or hear a strange sound from the display, unplug the power
cord and contact Customer Service.
- If you continue to use without taking proper measures, electrical shock or fire can occur.
n If you dropped the display or the case is broken, turn off the display and unplug the power
cord.
- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact
Customer Service.
n Do not drop an object on or apply impact to the display. Do not throw any toys or objects at the
display.
- It can cause injury to humans, problems to the display, and damage the display.
n Keep out of reach of children and do not place toys near the display.
n Make sure the display ventilation hole is not blocked. Install the display more than 10cm away
from the wall.
- If you install the display too close to the wall, it may be deformed or fire can break out due to internal
heat build-up.
n Do not cover the display with cloth or other material (eg. plastic) while plugged in.
- The display can be deformed or fire can break out due to internal overheating.
n Place the display on a flat and stable surface that is large enough to support the display.
- If the display is dropped, you may be injured or the display may be broken.
n Install the display where no Electromagnetic Interference occurs.
n Keep the display away from direct sunlight.
- The display can be damaged.
n Do not place the display on the floor.
- Small children and others may trip over it.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
2
Important Precautions
Precautions in Moving the Display
Warning
n Make sure to turn off the display.
- You may be electrocuted or the display can be damaged.
n Make sure to remove all cables before moving the display.
- You may be electrocuted or the display can be damaged.
n Do not shock the display when moving it.
- You may be electrocuted or the display can be damaged.
n Make sure the display faces forward and hold it with both hands to move.
- If you drop the display, the damaged display can cause electric shock or fire.
n Do not place the display face down.
- This may damage the display.
Precautions in Using/Cleaning the Display
Warning
n Do not attempt to disassemble, repair, or modify the display yourself.
- Fire or electric shock can occur.
- Contact Customer Service for repair.
n When cleaning the display, unplug the power cord and scrub gently with a soft cloth to prevent
scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the
display. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners,
or alcohol)
n Keep the display away from water.
- Fire or electric shock accident can occur.
n Avoid high temperatures and humidity.
n Do not put or store flammable substances near the display.
- There is a danger of explosion or fire.
n Keep the display clean at all times.
n Do not press on the display with a hand or sharp object such as nail, pencil or pen, or make a
scratch on it.
n Keep proper distance from the display and rest from time-to-time.
- Your vision may be impaired if you look at the display too closely or for too long.
n Keep small accessories out of the reach of children.
n Leaving a fixed image on the display for a long time may cause damage to the display and
cause image retention. Make sure to use a screen saver on the display. Burn-in and related
problems are not covered by the warranty on this display.
n Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one
direction only. Too much moisture may cause staining.
3
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
Important Precautions
On Disposal (Only, Hg lamp used Display)
n The fluorescent lamp used in this display contains a small amount of mercury.
n Do not dispose of this display with general household waste.
n Disposal of this display must be carried out in accordance to the regulations of your local
authority.
Precautions for Image Sticking
To optimize display lifetime and function, pay attention on the following operation
usages:
n Normal operating condition
- Operating Temperature: 0°C to 35°C
- Operating Ambient Humidity: 20% to 90%
- Display Pattern: dynamic pattern (real display)
Note: Long-term static display can cause image sticking.
n Operating usages under abnormal condition
a. Ambient condition
- Well-ventilated place is recommended to set up the system.
b. Power and screen saver
- Periodical power-off or screen saver is needed after long-term display.
n Operating usages to protect against image sticking due to long-term static display
a. Suitable operating time
- Under 18 hours a day.
b. Static information display recommended to use with moving image
- Cycling display between 5 minutes information (static) display and 10 seconds moving image.
c. Background and character (image) color change
- Use different colors for background and character, respectively.
- Change colors themselves periodically.
d. Avoid combination of background and character with large different luminance
Note:
1) Abnormal condition just means conditions except normal condition.
2) Black image or moving image is strongly recommended as a screen saver.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
4
Accessories
Included Accessories
Thank you for your purchase. Ensure that the following accessories are included
with your display. If an accessory is missing, please contact the dealer where you
purchased the display.
v The accessories included may differ from the images shown below.
Remote Control &
Batteries (AAA × 2)
Power Cord
Quick Start Guide
CD-ROM (User’s Manual)
5
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
Name and Function of the Parts
* The image shown in the user’s guide could be different from the actual image.
Front View
1
No.
2
Item
Description
1
Power indicator
Indicate power on or sleep mode status.
- Power on: LED lights up.
- Power off: LED off.
2
IR Receiver
Receive incoming remote control commands.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
6
Name and Function of the Parts
Rear View
1
2
12
3
4
QHD60
USB
1
13
INPUT
MENU
2
VOL
VOL
11
HDMI
1
RS-232 IN
1 2
No.
RS-232 OUT
3
PC / MUSIC
ETHERNET
4
RGB (PC)
PC
AUDIO IN
5
6
COMPONENT / VIDEO
Y/V
Pb/Cb
Pr/Cr
COMPONENT [GOOD]
L
AUDIO
7
AUDIO OUT
R
AUDIO DPTICAL
OUT
8
Item
Description
1
AC Power Input
Connector
Connect the power cord.
2
AC Switch
Switch the power supply on/off.
3
RS-232C Serial
Ports
Connect several displays with serial port.
2
10
3
9
4
Ethernet Port
Connect to a local area network (LAN) using an
Ethernet cable.
5
RGB Port
Connect to a PC VGA port.
6
PC Audio Input
Port
Connect to a PC’s line / audio port.
7
Connect to an external device, such as a VCR, STB, or
Component/
Video Input Ports a DVD player.
8
Stereo Audio
Line Out
Connect an external audio system or headphones.
7
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
Name and Function of the Parts
Rear View (continue)
No.
Item
Description
9
Optical Audio
Out
Connect an audio amplifier.
10
HDMI Ports
Connect an HDMI equipment or an HDMI-DVI adapter
cable to devices such as a DVD player or set-top box.
v HDMI Supports High Definition input and HDCP
(High-bandwidth Digital Content Protection). Some
devices require HDCP in order to display HD signals.
11
USB Ports
Connect to a USB device such as a USB flash drive or
USB hard disk drive.
12
QHD60 Ports
Connect an HDMI equipment such as a computer,
camcorder, or multimedia player which are able
to output 4x HDMI with individually 1080p@60Hz
resolution and compose to a QHD@60Hz resolution.
13
OPS Module Slot
Connect an OPS module device.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
8
Using the Remote Control
Name of the Remote Control Buttons
Power
Turn the display on/off.
OK
• Enter the submenu.
• Confirm the selection.
Wide
Change the display mode.
Audio only
Only output audio from
the display speaker.
Up
• Move upward on the
selection.
• Change selected item.
Menu
Display OSD (on-screen
display) menu.
Right
• Increase the values.
• Enter the submenu.
• Change the options.
Exit
Exit OSD menu.
Multimedia
Enter the multimedia
mode.
Input
Switch the input source.
Info
Display the input information.
Left
• Decrease the values.
• Change the options.
Back
Return to the previous
menu/screen.
Down
• Move downward on the
selection.
• Change selected item.
Mute
Mute the audio.
Volume
Adjust the volume.
Numbers (0~9, -)
Input the number.
Installing Batteries into the Remote Control
1. Open the battery cover.
2. Install the batteries matching the
correct polarity.
• Install two 1.5V AA batteries.
3. Close the battery cover.
• Dispose the used batteries
in the recycle bin to prevent
environmental pollution.
9
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
Mounting on a Wall
VESA FDMI Wall Mounting
This display supports a VESA FDMI compliant mounting interface. These mounts
are purchased separately. Refer to the instructions included with the wall mount for
more information.
v The handles are designed for carrying.
VESA-compatible wall bracket (WxH)
Screw type
Mount holes number
600 x 400 mm
M8
4
Handle
Handle
INPUT
MENU
VOL
VOL
Mounting the display
You can install the display on a vertical surface with a suitable wall mounting bracket
or on a horizontal surface with a table stand. Please pay attention to the following
notes during installation:
v This display should be installed by at least two adult persons. Attempting to
install this display by only one person may result in danger and injuries.
v Refer the installation to qualified technicians. Improper installation may cause the
display to fall or malfunction.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
10
Mounting on a Wall
Installing the display on a wall
1.Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface.
Make sure that the size of the cloth is larger than the display.
2.Gently lay the display on the cloth with the LCD screen facing down.
3.Identify the wall mounting screw holes on the back of the display as shown in the
illustration.
600mm
* Screw type :M8
400mm
4.Install the wall mounting bracket on the display and attach the display to the wall
according to the mounting bracket’s instructions. The length of the screw should
exceed the thickness of the wall mounting bracket by at least 16 mm. Make sure
that all screws are tightened and secured properly. (Recommended torque: 470 –
635N-cm). The mounting means should be strong enough to bear the weight of the
display.
Thickness ff the
all mounting
bracket
Display
16mm
(0.63”)
Note:
v To maintain proper ventilation, keep at least 10 mm of clear
space from the back cover of the display to the wall.
v Please consult a professional technician for wall mount
installations. The manufacturer accepts no liability for installations
not performed by a professional technician.
v The mounting means should be strong enough to bear the weight
of the display.
v The wall mounting bracket should have UL or related approval.
11
10mm
(0.39”)
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
Connecting to External Devices
Recommended Connection, Resolution & Picture Mode
HDMI Connection, 3840 x 2160@30Hz, dynamic
HDMI Connection (480p, 576p, 720p, 1080i, 1080p,
UHD@24Hz/30Hz)
HDMI supports ultra high definition (UHD) input, high definition input, and HDCP
(High-bandwidth Digital Content Protection). Some devices require HDCP in order to
display HD signals.
HDMI
HDMI signal cable
1
Display
2
VCR/DVD/Set-top Box
3
AUDIO
IN
HDMI
HDMI to DVI signal cable
1
Display
2
VCR/DVD/Set-top Box
Note: Dolby Digital is not supported.
3
AUDIO
IN
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
12
Connecting to External Devices
HDMI-QHD60 Connection (3840 x 2160 @60Hz)
Four HDMI ports form a UHD 60Hz. Each connection transmits 1080P @60Hz.
HDMI signal cable
1
1
HDMI signal cable
2
Display
2
HDMI signal cable
3
3
HDMI signal cable
4
Computer/
Camcorder/
Multimedia
player
4
UHD60
PC Connection
Check that the computer, display, and the peripherals are turned off. Then, connect
the signal input cable.
A. Connecting with an HDMI Signal Input Cable
HDMI
Display
B. Connecting with a D-sub(VGA) Signal Input Cable
Audio cable
PC
AUDIO IN
PC
RGB (PC)
Display
MAC
Macintosh Adapter
Use only the standard Macintosh adapter.
Do not use other adapter type that is compatible with different
signaling system.
13
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
Connecting to External Devices
Audio Out Connection
Audio cable
AUDIO OUT
Display
Speaker
Optical audio
cable
DPTICAL
Display
Audio
amplifier
Component Connection
VCR/DVD/Set-top Box
Display
Y/V
Pb/Cb
Pr/Cr
COMPOSITE [GOOD]
L
AUDIO
R
Component AV cable
Composite (Video) Connection
VCR/DVD/Set-top Box
Display
Y/V
Pb/Cb
Pr/Cr
COMPOSITE [GOOD]
L
AUDIO
R
Composite AV cable
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
14
Connecting to External Devices
USB Connection
USB
1
USB Flash Drive
2
Display
Ethernet Connection
ETHERNET
Ethernet (RJ-45) cable
Network
Display
Power Connection
Rear side of the display
INPUT
MENU
VOL
VOL
Power
outlet
Power cord
15
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
Connecting to External Devices
Installing OPS Module (Optional)
Rear side of the display
OPS
Module
INPUT
MENU
VOL
VOL
Note
• Refer to the instructions included with the OPS Module for more
information.
• Video interface supported is DVI and maximum resolution is 1080P
• DisplayPort is not supported
• Maximum power provide for OPS is 80W
Digital Signage Open Pluggable Specification
Open Pluggable Specification (OPS) for Digital Signage
Highlights
• Enables easier installation, use and maintenance of digital signs.
• Makes digital signage devices more intelligent and connected.
Overview
The open pluggable specification (OPS) helps standardize the design and
development of digital signage devices and pluggable media players. Intel created
OPS to address digital signage market fragmentation and simplify device installation,
usage, maintenance and upgrades.
OPS enables digital signage manufacturers to deploy interchangeable systems
faster.
Installing digital signage equipment based on Intel® architecture helps implement
scalable digital signage applications that can network easily with other equipment.
This simplifies interoperability and application upgrades designed to meet the
digital signage requirements of individual customers, while helping to future-proof
technology investments.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
16
OSD Menus
Screen Adjustment Options (using the Control Panel)
INPUT
5
MENU
VOL
VOL
INPUT
6
MENU
7
2
VOL
1
4
VOL
3
No.
Item
Description
1
Up
Select menu item (move up).
2
Down
Select menu item (move down).
3
Volume Up
- Increase the volume level.
- Adjust the settings (increase the value).
4
Volume Down
- Decrease the volume level.
- Adjust the settings (decrease the value).
5
Power
Turn the display on/off.
6
Input
Switch the input source.
7
Menu
Display/hide the OSD (on-screen display) menu or
return to the previous menu.
17
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
OSD Menus
Menu Options
Menu
Input
Description
Select the input source.
Picture
Adjust and refine the picture displayed on your display based
on ambient room light and personal preferences.
Audio
Adjust the audio settings.
Setup
Adjust the general settings such as CEI setting, OSD language,
and etc.
Ethernet
Wide
Sleep Timer
Note
Configure the network settings.
Select how the picture displays on the screen.
Set the timer to turn the display off at the preset time.
OSD (On Screen Display)
The OSD function enables you to adjust the screen status conveniently
since it provides graphical presentation.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
18
OSD Menus
Adjusting On-Screen Display (OSD) Settings
Display
OSD
menu
Select
a main
menu
Enter the
selected
menu
Select
a menu
item
Enter the
submenu
Adjust the
setting
Confirm
the
setting
Return
to
previous
menu
(*operation using the remote control)
1
Press the MENU button to display the OSD menu.
2
Use the p/q button to select the main menu.
3
Press the OK or u button to enter the selected menu screen.
4
Use the p/q button to select the menu item.
5
Press the OK or u button to enter the submenu.
6
Use the t/u button to adjust the setting/select the option.
7
Use the OK button to confirm the setting.
8
Press the MENU button to return to the previous menu/exit the OSD menu.
19
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
OSD Menus
Input Menu
Select the proper input source.
Note
• You can also access the Input menu by pressing the INPUT button on
the remote control.
• The available menu options varies depending on the input source.
• If the menu items are appears in gray, this indicates that those functions
are not available.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
20
OSD Menus
Picture Menu
Menu Option Description
Picture
Mode
Select a preset view option optimized for different viewing
conditions.
• Custom: User can use the user-defined settings as they wish.
• Cinema: This mode is normally used in movie. Soft image can
be seen in this mode. The picture is somewhat darker than other
mode.
21
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
OSD Menus
Picture Menu (continue)
Menu Option Description
Picture
Mode
• Nature: This mode shows normal and natural image.
• Sports: This mode uses high contrast display for clear-cut
images ideal for viewing sports events.
• Dynamic: This mode is normally used in department store,
Backlight and Sharpness is set to its maximum value. Saturation
of Color becomes high. You can see very bright, clear, and
sharp image.
• Game: This mode increases the brightness and response time
level for enjoying video games.
Note
“Picture Mode” option is not available if the input
source is PC.
Gamma
Select the appropriate setting of dark scenery. With greater
gamma value, dark scenery looks brighter.
Backlight
Adjust the backlight that affects the overall brilliance of the picture.
Contrast
Adjust the difference between the light and dark levels in the
picture.
Brightness
Adjust the brightness setting.
Color
Adjust the color intensity of the picture.
Tint
Adjust the picture hue.
Sharpness
Adjust the sharpness of the edges of elements in the picture.
Note
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
“Sharpness” option is not available if the input
source is PC.
22
OSD Menus
Picture Menu (continue)
Menu Option Description
Size &
Position
Adjust the display settings.
• Auto Adjust: Synchronize the display automatically.
• Horiz. Position: Move the screen position horizontally.
• Vertical Position: Move the screen position vertically.
• Horizontal Size: Set the horizontal size of the screen.
• Vertical Size: Set the vertical size of the screen.
• Fine Tune: Adjust the focus of the display. This item allows you
to remove any horizontal noise and clear or sharpen the image
of characters.
Note
• “Size & Position” menu is not available if the input source is HDMIQHD60.
• The available menu options varies depending on the input source.
23
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
OSD Menus
Picture Menu (continue)
Menu Option Description
Color
Temperature
Adjust the color settings.
• Color Temperature: Select from the predetermined color
temperatures.
• Red Gain / Green Gain / Blue Gain: Adjust the red / green /
blue gain settings to your preference.
• Red Offset / Green Offset / Blue Offset: Adjust the red / green
/ blue offset settings to your preference.
• Reset Color Temperature: Reset all Color Temperature
settings to the factory default settings.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
24
OSD Menus
Picture Menu (continue)
Menu Option Description
Advanced
Picture
Set advanced Picture settings.
• Dynamic Contrast: Adjust the brightness of the display to
maximize the picture quality.
• Local Dimming: Reduce the leakage and produce a darker
picture.
• MEMC: Reduce motion blur effect.
• Noise Reduction: Reduce the noise level.
• Digital NR: Reduce the noise level of digital signals.
• Film Mode: Produce smoother motion picture when viewing
movies from video players connected via HDMI.
Note
Reset
Picture
Settings
• “Advanced Picture” option is not available if the
input source is PC.
• Only “Local Dimming” and “MEMC” options are
available if the input source is HDMI-UHD60.
Reset all Picture settings to the factory default settings.
Select OK to reset all settings.
25
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
OSD Menus
Audio Menu
Menu Option
Description
XinemaSound™ Enable/Disable the multi-dimensional surrounding sound
function.
3D
XinemaSound™
Enable/Disable the smooth and steady volume level function.
Leveler
Bass
Adjust the bass level to your preference.
Treble
Adjust the treble level to your preference.
Balance
Adjust the sound balance between the left and right speakers.
Lip Sync
Adjust to match the movements and the lips of the person
talking on the screen.
Speakers
Turn the built-in speakers on or off.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
26
OSD Menus
Audio Menu (continue)
Menu Option
Description
Audio Only
Output audio from the speakers but turn off the display.
Digital Audio
Out
Select the type of digital audio output to an external audio
system.
Analog Audio
Out
Select the analog audio mode.
Equalizer
Settings
Customize the equalizer settings.
To adjust the settings, do the following:
i. Press the t/u button to select the option and select OK to
enter the submenu.
ii. Press the p/q button to adjust the setting.
Reset Audio
Settings
Reset all Audio settings to the factory default settings.
Select OK to reset all settings.
27
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
OSD Menus
Setup Menu
Menu Option
Description
CEI Settings
Configure CEI settings.
• CEI Function: Enable/Disable CEI function.
• Device Search: Search for CEI devices.
Note
“Device Search” option is only available if CEI
function is enabled.
Menu Language
Select the on-screen menu language.
Power Indicator
Enable or disable the power indicator on the front of the display
when the display is turned on.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
28
OSD Menus
Setup Menu (continue)
Menu Option
Description
Wired Control
Specify the type of network connection.
Command Input
Input source of Command Input via RS232 or OPS.
Set ID
Assign a unique Set ID NO (name assignment) to each display
when several displays are connected (via RS-232C) for
display.
Enter the ID number and select Set to confirm the setting.
System
Information
Display the system information of the display.
Select System Information to view the system information.
29
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
OSD Menus
Setup Menu (continue)
Menu Option
Description
Reset All
Settings
Return the display parameters on all menus to the factory
default settings.
Select OK to reset all settings.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
30
OSD Menus
Ethernet Menu
Menu Option
Description
Manual Setup
Configure the network settings.
• Type: User can use the user-defined settings as they wish.
• IP Address / Subnet Mask / Def. Gateway / Pref. DNS /
Alt. DNS: Enter the respective network parameters.
• Connect: Verify the network connection.
Note
• Check with your Information Technology Provider
for the correct setting.
• Be sure the RJ-45 cable is properly connected.
31
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
OSD Menus
Wide Menu
Select how the picture displays on the screen. As you select an option, you will see
the screen adjusting to the different size.
Note
• The available menu options varies depending on the input source.
• “Wide” menu is not available if the input source is 4k2k.
• The option is either “Panoramic” or “Stretch” depend on input screen
format:
- Panoramic: Standard screen format (ex. 4:3)
- Stretch: Wide screen format (ex. 16:9)
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
32
OSD Menus
Sleep Timer
Set the timer to turn the display off at the preset time.
Note
You can also access the Sleep Timer menu by pressing the SLEEP
button on the remote control.
33
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
Multimedia Mode
Multimedia Menu
This display is equipped with USB port that enables you to view photos, listen to
music, or watch videos stored on a USB storage device.
Multimedia support format
Container
ASF
Extensions
.asf
.wmv
Audio/Video
Video
AVI/DivX
.avi
Video/Audio
MPEG-2
.vob
PS (Program Stream),
VOB, SVCD
MP4
.mp4
MP3
.mp3
WAVE/WAV
.wav
JPEG
.jpeg
.jpg
Note
Video/Audio
Audio
• There may be files with these extensions that do not play correctly due
to Codec differences.
Basic Operation
1. Turn on the display.
2. Plug a USB device to the USB port on the display.
3. Press the MULTIMEDIA button on the remote control.
4. Select the USB port that you want to access and press
the OK button.
5. Select the media type of the file you wish to play and
press the OK button.
6. Use the p/q/t/u button to browse the files,
folders or menu options and press the OK
button to confirm.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
34
Multimedia Mode
Playback Music
1. Select Audio and press the OK button to enter the main Music content browser.
2. In the main Music content browser, use the p/q button to select a song.
3. Press the OK button to play, and an automatic playback begins from the selected
song.
n Press the
Press the
icon to pause the selected song playback.
button to resume the playback.
n You can highlight the
icon and press the OK
button to skip to the next song.
n You can highlight the
icon and press the OK
button to skip to the previous song.
n Select Sort to specify the sorting method.
n Select View to change the type of file listing.
n Select Browser Photos to playback photos.
35
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
Multimedia Mode
Watching Videos
1. Select Video and press the OK button to enter the main Video content browser.
2. In the main Video content browser, use the p/q button to select a video.
3. Press the OK button to begin the video playback.
n Press the
icon to pause the selected video playback. Press the
resume the playback.
n Press the
playback.
button to fast-forward the video
n Press the
button to rewind the video playback.
n Press the
button to stop the playback.
n Select Sort to specify the sorting method.
n Select View to change the type of file listing.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
36
button to
Multimedia Mode
Viewing Photos
1. Select Photo and press the OK button to enter the main Photo content browser.
2. In the main Photo content browser, use the p/q/t/u buttton to select a photo.
3. Press the OK button to view in full screen.
4. To begin a slide show, select Start Slideshow and press the OK button. A slide
show begins from the selected photo.
n Press the
button to pause the slide show, or press the
slide show.
button to stop the
n Select Sort to specify the file sorting method.
n Select View to change the type of file listing.
n Select Setting to customize the slide show settings.
- Shuffle: Enable/Disable the shuffle function.
- Speed: Set the interval time between each slide display.
- Effect: Select the transition effect between each slide
displays.
n Select Browser Music to playback songs.
37
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
Changing Display Mode
Set Aspect Ratio
1. Turn on the display.
2. Press the WIDE button on the remote control.
The Aspect Ratio menu appears on the screen.
3. Use the p/q button to select the aspect ratio of the display and press the OK
button to confirm.
Normal
Stretch
Wide
Panoramic
Zoom
Note
• The available menu options varies depending on the input source.
• The option is either “Panoramic” or “Stretch” depend on input screen
format:
- Panoramic: Standard screen format (ex. 4:3)
- Stretch: Wide screen format (ex. 16:9)
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
38
Troubleshooting
No image is displayed
l Is the power cord connected?
• See if the power cord is properly
connected to the outlet.
l Is the power indicator light on? • See if the power switch is turned on.
l Power is on, power indicator
is blue but the screen appears
extremely dark.
• Adjust brightness and contrast again.
l Is the power indicator amber?
• If the display is in power saving mode,
move the mouse or press any key.
• Backlight may need repair.
• Turn both devices off and then back on.
l Does the ‘NO SIGNAL’
message appear?
• The signal cable between PC and display
is not connected. Check the signal cable.
• Press INPUT on the remote control to
check the input signal.
The screen image looks abnormal
l Is the screen positioned?
• D-SUB analog signal –Select Auto
Adjustment in Size & Position menu to
automatically select the optimal screen
status that fits the current mode.
l Do thin lines appear in the
background?
• D-SUB analog signal –Select Auto
Adjustment in Size & Position menu to
automatically select the optimal screen
status that fits the current mode. If the
adjustment is not satisfactory, use the
Fine Tune menu.
l Power is on, power indicator
is blue but the screen appears
extremely dark.
• D-SUB analog signal ––Select Auto
Adjustment in Size & Position menu to
automatically select the optimal screen
status that fits the current mode. If the
adjustment is not satisfactory, use the
Fine Tune menu.
39
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
Troubleshooting
After-image appears on the screen
l After-image appears when the
previous image changed.
• If you display a fixed image for a long
time, the pixels may be damaged quickly.
Use the screen-saver function.
Screen color is abnormal
l Screen has poor color
resolution (16 colors).
• Set the number of color to more than 24
bits (true color). Select Control Panel
–Display–Settings–Color Table menu in
Windows.
l Screen color is unstable or
mono-colored.
• Check the connection status of the signal
cable or re-insert the PC video card.
l Do black spots appear on the
screen?
• Several pixels (red, green, white, or
black color) may appear on the screen,
which can be attributable to the unique
characteristics of the LCD Panel. This is
not a malfunction of the LCD.
If any of above instructions does not work, follow the instructions:
[1] Press MENU. Select Setup > Reset All Settings.
[2] Enter the password.
[3] Remove the AC power cord and wait for 10 seconds.
[4] Connect the AC power cord and turn on the display.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
40
Specifications
The product specifications can change without prior notice for product improvement.
LCD Panel
Power
Size
Native Resolution
Aspect Ratio
Frame Rate
Brightness
Contrast Ratio
Response Time
Display Color
84”
3840 x 2160
16:9
120Hz
350 nits
1400:1 (Typical)
5ms (Typical)
1.06 Billion
Input Voltage
100 ~ 240Vac
Input Frequency
50/60 Hz
On
550W
Standy
≤ 3W
Controllable ≤ 15W
Standby
Power Consumption
(Max)
Dimensions (Width x Height x Depth)
Dimensions &
Weight
1919.2mm x 1105.2mm x 67mm (without stand)
Net Weight
74.0kg +/- 2kg (without stand)
RGB: 1920 x 1080 @60 Hz
Video Signal
Maximum Resolution
Single HDMI: 3840 x 2160
@23.98/24/25/29.97/30Hz
4x HDMI: 3840 x 2160 @50/60Hz
Component: 1920 x 1080 I @50Hz
Composite: 480i (NTSC)
Supported
Color Format
Input
Connector
Environmental
Conditions
4K2K@30Hz / 4K2K@25Hz / 4K2K@24Hz: Up to RGB 4:4:4: 8 bit
≤ 1080P or 4K2K@50Hz / 4K2K@60Hz: Up to RGB 4:4:4 12 bit
HDMI, HDMI QHD60, RGB (VGA), RS-232C, RJ-45, Component/
Composite
Operational Condition Temperature: 0°C to 35°C, Humidity: 20% to 90%
Storage Condition
Temperature: -20°C to 60°C, Humidity: 10% to 90%
41
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
Specifications
PC Mode (RGB) – Preset Mode
Mode No.
Resolution
Refresh rate
1
720 x 400
70Hz
2
640 x 480
60Hz
3
640 x 480
75Hz
4
800 x 600
60Hz
5
800 x 600
72Hz
6
800 x 600
75Hz
7
1024 x 768
60Hz
8
1024 x 768
70Hz
9
1024 x 768
75Hz
10
1280 x 1024
60Hz
11
1280 x 1024
75Hz
12
1920 x 1080
60Hz
HDMI – Preset Mode
Single HDMI
Mode No.
Resolution
Refresh rate
1
640 x 480 P
60Hz 4:3
2
720 x 480 P
59.94Hz
3
720 x 480 P
60Hz 16:9
4
720 x 576 P
50Hz
5
1280 x 720 P
50Hz
6
1280 x 720 P
60Hz 16:9
7
1920 x 1080 I 50Hz
8
1920 x 1080 I
60Hz 16:9
9
1920 x 1080 P
50Hz
10
1920 x 1080 P
59.94Hz
11
1920 x 1080 P
60Hz 16:9
12
1920 x 1080 P
23.98Hz
13
1920 x 1080 P
24Hz
14
1920 x 1080 P
30Hz 16.9
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
42
Specifications
Single HDMI
Mode No.
Resolution
Refresh rate
15
3840 x 2160
23.98Hz
16
3840 x 2160
24Hz
17
3840 x 2160
25Hz
18
3840 x 2160
29.97Hz
19
3840 x 2160
30Hz
UHD60 (4x HDMI)
Mode No.
Resolution
Refresh rate
1
3840 x 2160
50Hz
2
3840 x 2160
60Hz
Component Mode – Preset Mode
Mode No.
Resolution
Refresh rate
1
720 x 480 I
59.94Hz
2
720 x 480 P
59.94Hz
3
1280 x 720 P
60Hz
4
1920 x 1080 I
60Hz
5
720 x 576 I
50Hz
6
720 x 576 P
50Hz
7
1280 x 720 P
50Hz
8
1920 x 1080 I
50Hz
Composite Mode – Preset Mode
Mode No.
Resolution
1
480i (NTSC)
43
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
Daisy Chain Connection
Use this method to connect several displays to a single PC.
You can control several displays at a time by connecting them to a single PC.
Connecting the cable
Connect the RS-232C cable as shown in the illustration.
* The RS-232C protocol is used for communication between the PC and display.
You can turn the display on/off or adjust the OSD menu from your PC.
RS-232C cable (not included)
IN
OUT
IN
OUT
IN
OUT
IN
OUT
PC
Display 1
Display 2
Display 3
Display 4
*Maximum of Daisy Chain: 4 pcs
RS-232C Configurations
2-Wire Configurations (Not Standard)
PC (or PD RS-232C Out)
6
7
8
9
PD (RS-232C In)
1
2
1
Pin 2 ,RD
3
4
5
2
3
Pin 3 , TD
9 Pin RS-232C Cable
Male
4
5
PC DB 9 Pin Male
5
6
7
1
8
9
Male
Communication Parameter
a Baud Rate: 115200
a Data Length: 8 Bit
a Parity Bit: None
a Stop Bit: 1 Bit
a Flow Control: None
a Communication Code: Hex Code
a Use a DB 9 Pin Cable
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
9
44
6
Pin No.
Designation Description Input/Output
1 DCD Data carrier detect
Input
2 RxD
Receive data
Input
3 TxD
Transmit data
Output
4 DTR
Data terminal ready
Output
5 GND Ground
-
6 DSR
Data set ready
Input
7 RTS
Request to send
Output
8 CTS
Clear to send
Input
9 RI
Incoming call
Input
HDMI CEI Connection
With Consumer Electronics Interface (CEI) feature, you can command and
control two or more CEC-enabled boxes, that are connected through HDMI, by
using only one of their remote controls. (e.g. controlling a television set, settop box and DVD player using only the remote control of the display).
Connecting the cable
Connect the HDMI cable as shown in the illustration.
HDMI
HDMI
Display
*Not support HDMI splitter or Daisy Chain connection, only support PC-Display 1:1
control.
HDMI CEI statement
Term
Description
One Touch Play Turning on the HDMI source device cause the connected
Display to be turned on and switch to HDMI Input
automatically.
Routing Control
Switch (Remote control or Front key) Display Input to
HDMI will cause the HDMI source device to be turned on.
System Standby Turning off the Display will cause the HDMI Devices in
the CEC net to be turned off.
45
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
RS-232C
RJ-45
Controlling the Multiple Product
Header (5 bytes)
Set Power
0xCC
0x33
0
# of
payload
bytes
4
Ack Set
Power
Set Input
Source
0xCC
0x55
0
4
0x10
0xCC
0x33
0
4
0x11
Ack Input
Source
Read Input
Source
Ack Read
Input Source
0xCC
0x55
0
4
0x11
0xCC
0x33
1
4
0x11
0xCC
0x55
1
4
0x11
command
Prefix code Prefix code Set Payload
#0
#1
ID
Type
Checksum
(1byte)
Payload (4 bytes)
Command
data #0
0x10
0 : 0ff
1 : On
0xE0 : OK
0xE1 : NG
0x30 : VGA1
0x40 : DVI1
0x50 : HDMI1
0x51 : HDMI2
0x52 : HDMI3
0x60 :
Composite1
0x70 : YPbPr1
0x80 : Music
Port
0x90 : TV1
0xA0 : HDMIUHD60
0xB0 : OPS
0xE0 : OK
0xE1 : NG
reserved (0x00)
0xE0 : OK
0xE1 : NG
data #1
data #2
CS #0
reserved (0x00) reserved Header XOR
(0x00)
Payload
reserved (0xFF) reserved Header XOR
(0xFF)
Payload
reserved (0x00) reserved Header XOR
(0x00)
Payload
reserved (0xFF) reserved Header XOR
(0xFF)
Payload
reserved (0x00) reserved Header XOR
(0x00)
Payload
0x30 : VGA1 reserved Header XOR
(0xFF)
Payload
0x40 : DVI1
0x50 : HDMI1
0x51 : HDMI2
0x52 : HDMI3
0x60 :
Composite1
0x70 : YPbPr1
0x80 : Music
Port
0x90 : TV1
0xA0 : HDMIUHD60
0xB0 : OPS
A1
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
RS-232C
RJ-45
Controlling the Multiple Product
RS232C CheckSum
Header (5 bytes)
Prefix code Prefix code
#0
#1
Set Power
0xCC
0x33
command
Set
ID
Checksum
(1byte)
Payload (4 bytes)
Payload # of payload
Command
Type
bytes
0
4
0x10
data #0
data #1
data #2
CS #0
"0 : 0ff
1 : On"
reserved
(0x00)
reserved Header XOR
(0x00)
Payload
We can make CheckSum with Header (5 bytes) and Payload(4 bytes).
(Prefix code#0) XOR (Prefix code#1) XOR (Set ID) XOR (Command Payload Type) XOR
(# of Payload bytes) XOR (Command) XOR (data #0) XOR (data #1) XOR (data#2) =
CheckSum
For example:
(0xCC) XOR (0x33) XOR (0x01 = Set ID) XOR (0x00) XOR (0x04) XOR (0x10) XOR (0x01 =
ON) XOR (0x00) XOR (0x00) = 0xEB
* Full list of RS-232C / RJ-45 commands available on request.
QuadHD84 User Manual
020-000671-01 Rev. 1 (10-2013)
A2
Make sure to read the Safety Precautions
before using the product.
Keep the Owner’s Manual(CD) in an accessible place for future reference.
The model and serial number of the SET
is located on the back and one side of the
SET. Record it below should you ever need
service.
MODEL
SERIAL
Temporary noise is normal when powering
ON or OFF this device.
Corporate offices
Worldwide offices
USA – Cypress
ph: 714-236-8610
Australia
ph: +61 (0) 7 3624 4888
Canada – Kitchener
ph: 519-744-8005
Brazil
ph: +55 (11) 2548 4753
Consultant offices
China (Beijing)
ph: +86 10 6561 0240
Italy
ph: +39 (0) 2 9902 1161
China (Shanghai)
ph: +86 21 6278 7708
Eastern Europe and
Russian Federation
ph: +36 (0) 1 47 48 100
France
ph: +33 (0) 1 41 21 44 04
Germany
ph: +49 2161 664540
India
ph: +91 (080) 6708 9999
Singapore
ph: +65 6877-8737
Japan (Tokyo)
ph: 81 3 3599 7481
Spain
ph: + 34 91 633 9990
Korea (Seoul)
ph: +82 2 702 1601
United Arab Emirates
ph: +971 4 3206688
Republic of South Africa
ph: +27 (0)11 510 0094
United Kingdom
ph: +44 (0) 118 977 8000
For the most
most current
currenttechnical
technicaldocumentation,
documentation,please
please
visitwww.christiedigital.com
www.christiedigital.com
visit