ViewSonic VS12119-1M User guide

®
ViewSonic
N2690w
LCD TV
- User Guide
- Guide de l’utilisateur
- Guía del usuario
IMPORTANT: Please read this User Guide to obtain important information on
installing and using your product in a safe manner, a s well as registering your
product for future service. Warranty information contained in this User Guide
will describe your limited c overage f rom ViewSonic Corporation, which is also f
ound on our web site at http://www.viewsonic.com in English, or in specif c
languages using the Regional selection box in the upper right corner of our website.
“Antes de operar su equipo lea cuidadosamente las instrucciones en este manual”
ViewSonic
®
Downloaded From TV-Manual.com Manuals
Model No. : VS12119-1M
Dear ViewSonic customer,
Congratulations on your purchase of a ViewSonic TV display. For maximum benefit of your TV,
please read these instructions before any operations.
For assistance, please contact ViewSonic service team at http://www.viewsonic.com/support/
or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775.
To purchase or inquire about any accessories and installation services you’re your TV, please
visit www.viewsonic.com or call: US (800)688 6688, Canada (866)463 4775.
Important! Please save the original box and all packing material for future shipping needs.
We recommend you registering your TV on the internet at: www.viewsonic.com
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
N2690w
ViewSonic LCD TV
VS12119-1M
N2690w-1M_UG_ENG Rev. 1A 03-17-08
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of
this product properly at the end of its useful life. Your local waste disposal company may
provide information about proper disposal.
The lamp in this product contains mercury. Please dispose of properly in accordance with
environmental laws of your location.
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note: You will need the product serial number.
Country/Region
United States
Web Site
www.viewsonic.com/support/
T= Telephone
F= Fax
T (Toll-Free) =1-800-688-6688
Email
service.us@viewsonic.com
T (Toll)= 1-424-233-2530
F= 1-909-468-1202
Canada
www.viewsonic.com/support/
T (Toll-Free) = 1-866-463-4775
service.ca@viewsonic.com
T (Toll) = 1-424-233-2533
F = 1-909-468-1202
Rentay Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEASE
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16
Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
i
1Z
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:
Name, address, of manufacturer and importers:
México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo
Interpalmas, Col. San Fernando Huixquilucan, Estado de México
Tel: (55) 3605-1099
http://www.viewsonic.com/la/soporte/index.htm
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004
Hermosillo:
Villahermosa:
Distribuciones y Servicios Computacionales SA de CV. Compumantenimietnos Garantizados, S.A. de C.V.
Calle Juarez 284 local 2
AV. GREGORIO MENDEZ #1504
Col. Bugambilias C.P: 83140
COL, FLORIDA C.P. 86040
Tel: 01-66-22-14-9005
Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09
E-Mail: disc2@hmo.megared.net.mx
E-Mail: compumantenimientos@prodigy.net.mx
Puebla, Pue. (Matriz):
RENTA Y DATOS, S.A. DE C.V. Domicilio:
29 SUR 721 COL. LA PAZ
72160 PUEBLA, PUE.
Tel: 01(52).222.891.55.77 CON 10 LINEAS
E-Mail: datos@puebla.megared.net.mx
Veracruz, Ver.:
CONEXION Y DESARROLLO, S.A DE C.V. Av.
Americas # 419
ENTRE PINZÓN Y ALVARADO
Fracc. Reforma C.P. 91919
Tel: 01-22-91-00-31-67
E-Mail: gacosta@qplus.com.mx
Chihuahua
Soluciones Globales en Computación
C. Magisterio # 3321 Col. Magisterial
Chihuahua, Chih.
Tel: 4136954
E-Mail: Cefeo@soluglobales.com
Cuernavaca
Compusupport de Cuernavaca SA de CV
Francisco Leyva # 178 Col. Miguel Hidalgo
C.P. 62040, Cuernavaca Morelos
Tel: 01 777 3180579 / 01 777 3124014
E-Mail: aquevedo@compusupportcva.com
Distrito Federal:
QPLUS, S.A. de
C.V. Av. Coyoacán
931
Col. Del Valle 03100, México,
D.F. Tel: 01(52)55-50-00-27-35
E-Mail : gacosta@qplus.com.mx
Guadalajara, Jal.:
SERVICRECE, S.A. de C.V.
Av. Niños Héroes # 2281
Col. Arcos Sur, Sector Juárez
44170, Guadalajara, Jalisco
Tel: 01(52)33-36-15-15-43
E-Mail: mmiranda@servicrece.com
Guerrero Acapulco
GS Computación (Grupo Sesicomp)
Progreso #6-A, Colo Centro
39300 Acapulco, Guerrero
Tel: 744-48-32627
Monterrey:
Global Product Services
Mar Caribe # 1987, Esquina con Golfo Pérsico
Fracc. Bernardo Reyes, CP 64280
Monterrey N.L. México
Tel: 8129-5103
E-Mail: aydeem@gps1.com.mx
MERIDA:
ELECTROSER
Av Reforma No. 403Gx39 y 41
Mérida, Yucatán, México CP97000
Tel: (52) 999-925-1916
E-Mail: rrrb@sureste.com
Oaxaca, Oax.:
CENTRO DE DISTRIBUCION Y
SERVICIO, S.A. de C.V.
Murguía # 708 P.A., Col. Centro, 68000, Oaxaca
Tel: 01(52)95-15-15-22-22
Fax: 01(52)95-15-13-67-00
E-Mail. gpotai2001@hotmail.com
FOR USA SUPPORT:
ViewSonic Corporation
381 Brea Canyon Road, Walnut, CA. 91789 USA
Tel: 800-688-6688 (English); 866-323-8056 (Spanish);
Fax: 1-800-685-7276
E-Mail: http://www.viewsonic.com
Tijuana:
STD
Av Ferrocarril Sonora #3780 L-C
Col 20 de Noviembre
Tijuana, Mexico
4.3: ViewSonic Mexico Limited Warranty
LTV_LW02 Rev. 1A 06-25-07
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
ii
1Z
Caution
Please use the following ViewSonic TVs only with the following wall-mount kit.
ViewSonic Wall-Mount kit model
ViewSonic TV Model No.
N2690w
WMK-13
Use with other Wall-Mount kit may cause instability and possibly result in injury.
To find the perfect mount for N2690w, please browse www.viewsonic.com or call
our service team: US 1-800-688-6688, Canada 1-866-463-4775.
Copyright Information
Copyright © ViewSonic® Corporation, 2008. All rights reserved.ViewSonic, the three
birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection
Agency (EPA). As an ENERGY STAR® partner, ViewSonic Corporation has
determined that this product meets the ENERGY STAR® guidelines for energy
efficiency.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors
or omissions contained herein; nor for incidental or consequential damages resulting
from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves
the right to change product specifications without notice. Information in this document
may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means,
for any purpose without prior written permission from ViewSonic Corporation.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
iii
1Z
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modifications not expressly approved
by the party responsible for compliance could void your authority to operate the
equipment.
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and
Electronic
Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the
equipment as unsorted municipal waste, but use the return and collection
systems according to local law.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
iv
1Z
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive
2002/95/EC of the European Parliament and the Council on restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS Directive)
and is deemed to comply with the maximum concentration values issued by the
European Technical Adaptation Committee (TAC) as shown below:
Substance
Proposed Maximum
Concentration
Actual Concentration
Lead (Pb)
0.1%
<0.1%
Mercury (Hg)
0.1%
<0.1%
0.01%
< 0.01%
Hexavalent Chromium (Cr6+)
0.1%
< 0.1%
Polybrominated biphenyls (PBB)
0.1%
< 0.1%
Polybrominated diphenyl ethers (PBDE)
0.1%
< 0.1%
Cadmium (Cd)
Certain components of products as stated above are exempted under the Annex of
the RoHS Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other
lamps not specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and
electronic ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight
or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight,
aluminium containing up to 0.4% lead by weight and as a cooper alloy
containing up to 4% lead by weight.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
v
1Z
Contents
Product Registration................................................................................i
Customer Support....................................................................................i
Caution......................................................................................................iii
Copyright Information .............................................................................iii
Compliance Information .........................................................................iv
Declaration of RoHS Compliance ..........................................................v
Warning and Notification.........................................................................1
Important Safety Instructions .................................................................2
Getting Started
List of Features .......................................................................................7
Package Contents ...................................................................................7
Installing the LCD TV ............................................................................8
Installing the Stand ................................................................................8
Disconnecting the Stand .......................................................................8
Mounting ViewSonic LCD TV to the wall ................................................9
Wall Mount Kit Specifications (VESA) ..................................................10
Front View of the Product........................................................................11
Rear View of the Product.........................................................................12
Side View of the Product .........................................................................13
Connecting the LCD TV ...........................................................................15
Cable System or VHF/UHF Antenna System .........................................15
Cable System and VHF/UHF Antenna System ......................................15
HD Cable Box/HD Satellite Box..............................................................15
Personal Computer ................................................................................17
Other Equipment ....................................................................................18
Using the TV Features
Remote Control and TV Controls............................................................19
Inserting Remote Control Batteries ........................................................19
Programming your Cable or Satellite Box remote ..................................19
Remote Control and TV Controls ...........................................................20
Operation ..................................................................................................22
Other Information
Cleaning the LCD TV ...............................................................................28
Programming your Cable or Satellite Box remote ................................28
Trouble Shooting .....................................................................................29
Specifications ..........................................................................................31
Limited Warranty......................................................................................32
Mexico Limited Warranty.........................................................................33
Index .........................................................................................................34
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
1Z
WARNING
Do not expose this TV to rain or
moisture. It may increase the risk to fire
or electronic shock.
Dangerous Voltage: The
lightning
flash
with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user to
the presence dangerous
voltage within the inside of
the product that may be
sufficient level to constitute
a risk of electric shock to
persons.
Instruction:
The
exclamation point within an
equilateral
triangle
is
intended to alert the user t
o the presence o f important
operating and servicing
instructions
in
the
literature accompanying
the appliance.
The TV shall not be exposed to
dripping or splashing. Do not put
objects filled with liquids, such as vases,
on the TV.
CAUTION
To prevent electric shock, do not use
this polarized AC plug with an
extension cord, receptacle or other
outlet unless the blades can b e fully
inserted to prevent blade exposure.
Declaration of Conformity
Trade Name: ViewSonic
Model: N3290w
Responsible Party: ViewSonic
Corporation Address: 381 Brea
Canyon Road, Walnut, CA. 91789
USA
Telephone Number: 800-688-6688
This device complies with part 15 of
the FCC rules. Operation is subject to
the following two conditions: 1) This
device may not cause harmful
interference, and 2) this device must
accept any interference received,
including interference that may cause
undesired operation.
NOTIFICATION
This device has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of
the FCC Rules. limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This device generates, uses
and can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a
particular installation. If this equipment
does cause harmful interference to
radio or television reception, which
can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
¸ Reorient or relocate the receiving
antenna.
¸ Increase the separation between the
device and receiver.
¸ Connect the device into an outlet
on a circuit different from that to
which the receiver is connected.
¸ Consult the dealer or an
experienced radio/TV technician
for help.
Pursuant to FCC regulations, be
cautioned that any changes or
modifications not expressly approved
in this manual could void your
authority to operate this equipment.
Safety
¸ Operate the TV only on 120 – 240 V
AC.
¸ Use the AC power cord specified by
ViewSonic and suitable for the
voltage where you use it.
¸ The plug is designed, for safety
purposes, to fit into the wall outlet only
one way. If you are unable to insert
the plug fully into the outlet, contact
your dealer.
¸ If any liquid or solid object should fall
inside the cabinet, stop operating,
unplug the TV immediately and have it
check by qualified service technician.
long time, disconnect the power by
pulling the plug itself. Do not pull on
the cord.
¸ For details concerning safety
precautions, refer to “Important Safety
instructions” on page 2.
Installation
¸ The TV should be installed near an
easily accessible power outlet.
¸ To prevent internal heat buildup, do
not block the ventilation openings.
¸ Do not install the TV in a hot or
humid place, or in a place subject
to excessive dust or mechanical
vibration.
¸ Avoid operating the TV at
temperatures below 41°F (5°C).
¸ When the TV is transported directly
form a cold to a warm location, or
if the room temperature changes
suddenly, the picture may be
blurred or show poor color due to
moisture condensation. In this
case, please wait a few hours
before turning on the TV, in order
to let the moisture evaporate first.
¸ To ensure best picture quality, do not
expose the screen to direct
illumination
or
sunlight.
We
recommend you use spot lighting
directed down from the ceiling or to
cover the windows that face the
screen with opaque curtains. It is
better that TV is installed where the
floor and walls are not of a reflective
material.
To Customers
To install the specified TV, sufficient
expertise is required .Make sure you
subcontract
the
installation
to
ViewSonic
dealer
or
licensed
contractors and pay adequate
attention to safety during the
installation.
Note
This television includes a QAM
demodulator, which should allow you to
receive unscrambled digital cable
television
programming
via
subscription service to a cable service
provider. The type of programming
and signal provided by your cable
service provider will affect the
availability of digital cable television
programming in your area.
Trademark Information
Macintosh is a trademark of Apple Inc.,
registered in the U.S. and other countries.
HDMI, the HDMI logo and High-Definition
Multimedia Interfac e are ttrademarks o f
Dolby Laboratories.
Blue-ray Disc is a trademark.
Adobe is a registered trademark or a
trademark
of
Adobe
Systems
Incorporated in United States and/or
other countries.
¸ If you will not be using the TV for a
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
1
N2690w
Important Safety
Instructions
1) Read these instructions completely before
using the equipment.
2) Keep these instructions in a safe place.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean with a soft, dry cloth.
7) Do not block any ventilation openings. Install
the equipment in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources
such as radiators, heat registers,
stoves, or other devices (including
amplifiers) that produce heat.
9) Do not attempt to circumvent the safety
provisions of the polarized or groundingtype plug. A polarized plug has two blades
with one wider that the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade and the
third prong are provided for your safety. If
the provided plug does not fit into your
outlet, consult an electrician for replacement
of the outlet.
10) Prevent the power cord from being tread
upon or pinched, particularly at the plug,
convenience receptacles, and the point
where they exit from the device. Be sure
that the power outlet is located near the
equipment so that it is easily accessible.
11) Only use attachments/ accessories specified
by the manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus when it will be unused
for a long period of time.
14) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, or the unit does not operate
normally, or has been dropped.
USE
AC power Cord
Keep the following guidelines to protect the AC
power cord from being damaged. If the AV
power cord is damaged, it may result in a fire or
an electric shock. Stop using it and ask your
dealer or ViewSonic service center to exchange
it.
¸ Do not place the TV where the power cord is
subject to wear or abuse.
¸ Do not pinch, bend, or twist the cord
excessively. The core lines may be bared and
cut, causing a short-circuit, and resulting in a
fire or an electric shock.
¸ Do not convert or damage the power
cord.
¸ Avoid power cord being rolled
over or rested upon.
¸ When the power cord plugged in, do not move
theTV.
¸ Keep the power cord away from heat sources.
¸ When you disconnect the AC power cord,
disconnect it from the wall outletfirst.
¸ When disconnecting the power cord, grasp the
plug instead of pulling the power cord.
¸ Use only an original ViewSonic AC power
cord, not other brands.
¸ Do not use the supplied AC power cord on
any other equipment.
Wall outlet
The TV set with a three-wire grounding type
AC power cord plug must be
connected to an AC power socket
outlet with a protective grounding
connection.
Do not use an unfitting outlet.
Insert the plug fully into the outlet. If it
is loose, do not use it. Doing so may cause arcing
and result in a fire.
Contact your electrician to change the outlet.
Wiring
For your safety, be sure to unplug the AC power
cord when connecting cables.
Take care not to trip on the cables. It may cause
damage to the TV set.
Electric shock
Do not touch the AC power cord or the TV
with a wet hand. If you plug/unplug
the AC power cord from the TV with
a wet hand, it may cause electric
shock.
Lightning storms
During a lightning storm, unplug the TV from the
wall outlet and disconnect the antenna to revent
damage to the TV.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
2
N2690w
When not in use
If you will not be using the TV set for long
periods of time, the TV set should be
disconnected from the AC power outlet to
prevent power line surges. The TV set is not
disconnected from the AC power source when
the TV set is switched off. To disconnect the
TV set completely unplug from the AC power
outlet.
Overloading
This TV set is designed to operate on a
120 - 240 V AC supply only. If there are
too many appliances connected to the
same AC power outlet, it could result in a
fire or an electric shock.
Optional equipment
If optional equipment is to be installed, leave
some space between optional equipment and
the TV set. Picture distortion and/or noisy
sound may occur if the TV set is positioned in
close proximity to any equipment emitting
electromagnetic radiation.
Small accessories
Keep small accessories in as safe place where
children are unable to reach.
ANTENNAS
Outdoor antenna grounding
If an outdoor antenna i s installed, follow the
precautions below. Do not install the outdoor
antenna system in near of overhead power
lines or other electric light or power circuits, or
where it can come in contact with such power
lines or circuits.
WHEN
INSTALLING
AN
OUTDOOR
ANTENNA
SYSTEM,
EXTREME
CARE
SHOULD BE TAKEN TO KEEP FROM
CONTACTING SUCH POWER LINES OR
CIRCUITS AS CONTACT WITH THEM IS
ALMOST INVARIABLY FATAL.
Be sure the antenna system is grounded so that
it can provide some protection against voltage
surges and built-up static charges.
Section 810 of the National Electrical Code
(NEC) in the U.S.A. and Section 54 of the
Canadian Electrical Code in Canada provides
information with in regard to proper grounding
of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of
antenna discharge unit, connection to
grounding electrodes, and requirements for
the grounding electrode.
Antenna grounding according to the
National Electrical Code, ANS/NFPA 70
Antenna
Ground clamp
Antenna discharge
unit
Electric service
equipment
Ground clamps
unit
Grounding conductors
Power service grounding
electrode system
NEC: National Electrical Code
BATTERIES
¸ Do not cast away batteries in a fire.
¸ Do not disassembled, overheat, or short-circuit
the batteries.
¸ If battery replaced in the wrong way, it may
cause danger of explosion. Replace only with
the same or equivalent type.
Dispose used batteries
T o p r e s e r v e o u r e n v i r o n m e n t, d i s p o s e o f
used batteries according to your local laws or
regulations.
CLEANING
Cleaning the AC power plug
Unplug the AC power plug and clean
it regularly. If the plug is covered with
dust and gathers moisture, its
insulation may deteriorate and result
in a fire.
Cleaning the screen surface/
cabinet of the TV set
When cleaning this TV, unplug the
AC power cord. If not, it may result
in electric shock. Use a dry soft cloth
to clean the cabinet of the TV. To remove dust
form the screen, wipe it gently with a soft cloth.
Stubborn stains may be removed with a cloth
slightly dampened with a solution of mild soap
and warm water. Never use strong solvents
such as thinner or benzine for cleaning. If using
a chemically pretreated cloth, please follow the
instruction provided on the package. The
ventilation holes can accumulate dust over time.
To ensure proper ventilation, we recommend
you to remove the dust periodically (once a
month) using a vacuum cleaner.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
3
N2690w
MAGNETIC INFLUENCE
VENTILATION
This TV contains a strong magnet in the
speaker unit that generates a magnetic field.
Keep any items susceptible to magnetic fields
away from the speaker.
Slots and openings in TV are provided for
ventilation. To ensure reliable operation of the TV
and to protect
it from overheating, be sure these openings are
not blocked or covered.
The TV may accumulate dust and get dirty if
proper ventilation is not provided. For proper
ventilation, follow the following guidelines:
¸ Never install the TV face up, down or
sideways.
¸ Never install the TV turned over
or upside down.
¸ Never cover the slots and
openings with a cloth or other
materials.
¸Never block the slots and openings
by placing the TV on a bed, sofa,
rug or other similar surface.
¸ Never place the TV in a confined
space, such as a bookcase or builtin
cabinet,
unless
proper
ventilation is provided.
SOUND
If you hear snapping or popping
sound comes from the TV
continuously or frequently while the
TV is operating, unplug the TV and
consult your
dealer or service technician. It is normal for
some TVs to make occasional snapping or
popping sounds, particularly when being turned
on or off.
CARRYING THE TV
Carry the TV as instructed
To prvent dropping the TV and causing serious
injury, you must follow these guidelines:
¸ Disconnect all cables before carrying the TV.
¸ Carrying the large size TV requires at least
two or three people.
¸ When you carry the TV, place your hands as
illustrated and hold it securely. Do not put stress
on the LCD panel and the frame around the
screen.
¸ When carrying the TV, do not subject it to
shocks, vibration, or excessive force.
¸ When lifting or moving the TV, hold it securely
from the bottom. Place your palm directly under
the panel.
Leave some space around the TV set as shown
below. Otherwise, air-circulation may be
inadequate and cause overheating, which may
cause a fire or damage to the TV set.
Installed on the wall
11.875 inches
(30.16 cm)
4 inches
(10 cm)
4 inches
(10 cm)
Leave at least this
space around the set.
4 inches
(10 cm)
Installed with stand
11.875 inches
(30.16 cm)
(10 cm)
4 inches
(10 cm)
2.375 inches
(6.03 cm)
Leave at least this space around the set.
Do not install the TV set as follows:
Air circulation is blocked.
Air circulation is blocked.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
4
N2690w
Objects and ventilation holes
Never push any objects into the slots on the TV
cabinet as they may touch dangerous voltage
points or short out parts that could result in a fire
or an electric shock. Do not place any objects on
the TV.
MOISTURE
Moisture and flammable objects
¸ Keep the product away from moisture. Do not
expose this appliance to rain or moisture. Do
not place objects filled with liquids, such as
vases, on the TV.
¸ Do not use power-line operated V sets near
water, such as in places like a bathtub,
washbowl, kitchen sink, laundry tub, a wet
basement, or near a swimming pool, etc. It may
cause fire or electric shock.
¸ Do not let this TV get wet. Never
spill liquid of any kind on the TV. If
water penetrates into the product,
unplug the power cord and contact
ViewSonic. Donot operate the TV. It
may result in electric shock or
damage to the TV.
¸ To prevent fire, keep flammable
objects or open flame (e.g. candles)
away from the TV.
INSTALLATION
To do Wall mount installation, you need a WallMount Bracket. When installing or removing
the TV using the Wall-Mount Bracket, be sure
to use qualified contractors. If not properly
secured during installation or removal from the
Wall-Mount Bracket, the TV may fall and cause
serious injury.
Optional wall mount
¸ When installing the TV using a Wall-Mount
Bracket, make sure you follow the operating
instructions supplied with the Wall-Mount
Bracket.
¸ Attach the brackets supplied with the WallMount Bracket.
¸ The TV is not designed for hanging from
the ceiling. It may fall and cause serious
injury.
Placement
The TV should be installed near an easily
accessible AC power outlet.
Observe the following to prevent the TV from
falling from the stand or wall mount.
¸ Place the TV on a stable, level
surface.
¸ Do not hang anything on the TV. Do not allow
children to climb on the TV.
Do not install the TV in places subject to extreme
temperature, such as in direct sunlight, near a
radiator, or heating vent. If the TV is exposed to
extreme temperature, the TV may overheat and
cause deformation of the enclosure or cause
malfunction. Do not install the TV in a place
exposed to direct air conditioning. If the TV is
installed in such a location, moisture may
condense inside and may cause a malfunction.
¸ Do not place the TV in hot, oily,
humid or excessively dusty places.
¸ Do not install the TV where
insects may enter.
¸ Do not install the TV where it may be exposed
to mechanical vibration.
¸ Do not install the TV in a location where it may
spear up, such as on or behind a pillar, or where
you might bump your head on it. It may cause
injury.
Preventing the TV from toppling over
To prevent the TV from toppling over, secure the
TV to a wall or stand.
Placement for watching
We suggest you to watch the TV at a distance
of 3-7 times that of the screen height, and not
in excessive brightness. It is easy to cause eye
fatigue if you watch TV for too long or in a dark
room. To obtain clear picture, do not expose the
screen to direct illumination or sunlight. Use spot
lighting directed down from the ceiling if you can.
Use in outdoor
This TV is not designed for
outdoors installation. Do not
expose the TV to rain, as it may
result in a fire or an electric shock.
Also, do not expose the TV to
direct sunlight, as it may heat up
and become damaged.
Vehicle, ships and other vessels
Do not install this TV in a vehicle.
Car accidents may cause the TV to
fall down and cause injury.
Do not install this TV in a ship or
vessel. If the TV is exposed to
seawater, it may cause a fire or
damage the TV.
Medical institutions
Do not place this TV in a place where medical
equipment is in use.
It may cause the medical equipment to
malfunction.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
5
N2690w
VOLUME ADJUSTMENT
Broken pieces
¸ Adjust the volume to avoid disturbing your
neighbors. Sound carries easily at night.
Therefore, we suggest you close the windows
or use headphones.
¸ When using headphones, adjust the volume
to appropriate levels, or hearing damage may
result.
Do not throw anything at the TV.
Doing so may break the screen glass
and cause serious injury.
If the surface of the TV cracks, unplug
the AC power cord before touching the
TV. Otherwise electric shock may result.
LCD SCREEN
If the LCD panel gets damaged, crystalline liquid
leakage may occur, or scattered broken glass may
result. Do not touch broken glass or crystalline
liquid which is toxic, with bare hands as cuts,
poisoning or skin irritation may occur. Also do not
glass fragments or leaked crystalline liquid get
into your eyes or mouth. Should either contacted
your eyes or mouth, rinse the contacted area
thoroughly with water and consult your doctor.
¸ Although the LCD screen is made with highprecision technology and has effective
pixels of 99.99% or more, black dots or
bright points or light (red, blue, or green)
may appear constantly on the LCD screen.
This is a structural property of the LCD
panel and is not a malfunction.
¸ The LCD screen is made with high-precision
technology. To achieve a high level of
performance and picture quality, this TV’s
backlight setting is set to maximize the
brightness of the TV. However, uneven
brightness may be observed when the LCD TV
is viewed in a dark environment without an
input source or a blank screen. This is a normal
condition, not a malfunction of the TV. To
improve this condition, change the Picture
mode, Backlight setting, enable the Light
Sensor, or turn on the Power management.
¸ Avoid exposing the LCD screen surface to
direct sunlight. It is likely to damage the LCD
panel.
¸ Do not push or scratch the LCD screen, or place
objects on top of the TV. The image may be
uneven or the LCD panel may be damaged.
¸ If the TV is used in a cold place, a smear may
occur in the picture or the picture may become
dark. This does not indicate a failure. These
phenomena improve as the temperature rises.
¸ When still pictures are displayed continuously,
ghosting may occur. It should disappear after a
short period of time.
¸ The screen and cabinet get warm when the TV
is in use. This is a normal condition.
¸ Spraying insect repellent with volatile material
on the screen will cause damage.
¸ Do not make prolonged contact with rubber
or plastic material.
Handling of broken glass and liquid
crystal leakage
SERVICING
Do not attempt to repair the TV
yourself, since opening the cabinet
may expose you to dangerous
voltage or other hazards. Ask qualified service
personnel to do the servicing for your TV.
Replacement parts
When replacement parts are required, be sure
the service technician certifies in writing that
he/she has used replacement parts specified by
the manufacturer that have the same
characteristics
as
the
original
parts.
Unauthorized substitutions may cause a fire,
an electric shock or other hazards.
Safety check
Upon completion of repairs to the TV, ask the
service technician to perform routine safety
checks (as specified by the manufacturer) to
determine that the TV is safe for operating, and
to so certify. Ask a qualified service technician
to dispose of the TV.
For Customers in the United States
There is mercury in the lamp of this product.
Disposal of these materials may be regulated
due to environmental considerations For disposal
or recycling information, please contact your
local authorities or the Electronic Industries
Alliance (http//www. eiae.org).
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
6
N2690w
Getting Started
List of Features
1.
2.
3.
4.
5.
Enjoy HDTV with 1366x768 native image resolution.
ClearPictureTM technology with 3D de-interlacing for precise video.
Built-in digital tuners (HDTV, NTSC, Clear QAM-digital cable)
Displays multiple TV formats including 480i, 480p, 720p, 1080i.
Easy setup with multiple video inputs including digital HDMI.
6. ENERGY STAR® power savings.
7. Convenient swivel base
Package Contents
Please make sure the following items are included with your LCD TV.
If any items are missing, please contact your dealer.
LCD TV
Remote Control
with batteries
ViewSonic User Guide
ViewSonic Quick Start Guide
Power Cord
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
7
N2690w
Getting Started
Installing the LCD TV
Installing the Stand
1. Place the TV face down on a soft cloth or cushion on a table.
2. Connect the stand with the hinge at the back of TV with 4 screws.
3. Attach the base to the stand with 4 screws
Disconnecting the Stand
1. Place the TV face down on a soft cloth or cushion on a table.
2. Remove the base. It is attached to the stand with 4 screws.
3. Remove the 4 screws holding the stand to the hinge.
4. Remove the stand.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
8
N2690w
Getting Started
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before installing
the product to the wall, please consider the following guidelines:
z Read the Important Safety Instructions, at the start of this manual.
z Do not install in a moist or wet environment. This equipment is intended for
indoor use.
z Do not install near heat source, or strong magnetic fields
z Use only ViewSonic approved wall-mounting brackets to support the LCD TV
weight
z Before attaching the wall mount plate to the back cover, ensure the product is
working
z If your LCD TV is already set up for free-standing operation, you need to first
remove the stand before mounting the device to the wall.
To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:
z Disconnect the power and any other cables that might hinder moving the LCD TV.
z Set the LCD TV on a table or work surface, placing the screen face down on a
towel or woolen blanket to protect the screen surface from damage while
installing plate.
z Through the matching screw holes in the bracket, there are 4 screws mounted on
the backside of the LCD TV. Loosen all 4 screws, and keep for future use.
z Install the wall mount plate to the LCD TV using screws NO LONGER than 10mm,
as longer screws found in universal (non-ViewSonic) wall mount kits may
damage the power supply causing the unit to fail. The wall-mount screw type is
M4 x L10.
z Mount the wall mount bracket to the wall ensuring use of proper screws to
support the installation. Ensure there is at least 6cm of space surrounding any
air-vents of your LCD TV to allow adequate cooling during operation.
z Hang the LCD TV wall mount plate to the wall mount bracket, completing
installation. Enjoy your ViewSonic LCD TV
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
9
N2690w
Getting Started
Wall Mount Kit Specifications (VESA)
When attaching to other building materials, please contact your nearest dealer.
C
D
Product Family
LCD TV
z
z
z
inch
VESA Spec. (A x B) Standard Screw(C xD)
Quantity
19 ~ 22
100 x 100 mm
M4 x L10
4
26
200 x 100 mm
M4 x L10
4
32 ~ 37
200 x 200 mm
M6 x L10
4
42
400 x 200 mm
M6 x L10
4
47
(200+200) x 200 mm
M6 x L10
6
ViewSonic provides the standard dimensions for wall mount kits as shown in the
table above
When purchasing our wall mount kit, a detailed install manual and all parts
necessary for assembly are provided.
Do not use the screws that longer than the standard dimension, as they may
cause damage to the inside of the TV set.
Caution
Please use the following ViewSonic TVs only with the following wall-mount kit.
ViewSonic TV Model No.
N2690w
WMK-13
ViewSonic Wall-Mount
kit model
Use with other Wall-Mount kit may cause instability and possibly result in injury.
To find the perfect mount for N2690w, please browse www.viewsonic.com or call our
service team: US 1-800-688-6688, Canada 1-866-463-4775.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
10
N2690w
Getting Started
Front View of the Product
1
2
Item
Remote Control Receiver
Power LED Indicator
3
Power ON/OFF button
4
5
6
SOURCE
MENU
CH ź
7
CH Ÿ
8
VOL -
9
VOL +
Description
Receives IR signals from the remote control
Lights up in blue when the TV is turned on.
Lights up in red when the TV is in standby mode.
Turn the power on from standby mode or turn
the power off return to the standby mode.
Select input source.
Turn OSD menu ON/OFF.
Channel down when source is TV, or select a
control while in OSD menu.
Channel up when source is TV, or select a
control while in while in OSD menu.
Decrease sound volume or adjust a highlighted
control while in OSD menu.
Increase sound volume or adjust a highlighted
control while in OSD menu.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
11
N2690w
Getting Started
Rear View of the Product
Item
1 Power (AC input)
2
3
4
5
TV Input Jack
YPbPr Audio input
(left/ right)
YPbPr signal input
SPDIF
PC Audio input
VGA signal input
6
S-Video input
7
Composite Video
input
Composite/ S-Video
Audio input
(left/ right)
HDMI Input
Description
Plug-in the supplied AC Power cord and connect to the
AC input power source.
Connect this jack to your Cable or VHF/UHF antenna
Connect the Audio in cable for YPbPr from this jack to
the corresponding connectors on your A/V device
Connect this jack to the YPbPr output of A/V device.
Connect to a Digital Audio device.
Connect the RGB Audio Out on your computer to the
RGB Audio on the rear of the LCD TV display. This
jack is used for both PC Audio and DVI Audio input.
Connect a 15-pin D-sub RGB cable to the RGB output
of your computer and the other end to the RGB input
on the rear of the LCD TV display.
Connect the S-Video cable from the compatible device
to this connector on the rear panel of the LCD TV
display.
Connect this jack to the composite video output
connectors on your A/V equipment.
Connect the Audio in cable for AV/ S-Video from this
jack to the corresponding connectors on your A/V
device
Connect this port to the HDMI/HDMI-DVI jack of the
compatible equipment.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
12
N2690w
Getting Started
Side View of the Product
Item
A
Headphone Jack
Description
Connect to your headphones. By connecting the
headphones, you can listen to the sound from the TV
on headphones.
ϠIf you connect the headphones, the TV speakers will
be muted
AV connection
Connect the composite video and audio input jacks to the corresponding output jacks
of your A/V device.
--- VIDEO: Composite Video input [6]
--- AUDIO: AV/ S-Video signal Audio input [6]
S-Video connection
Connect the S-Video and audio input jacks to the corresponding output jacks of your
VCR or other video device that has S-Video. S-Video provides better picture quality
than composite video connection. If both are connected, S-Video signal has priority.
--- VIDEO: S-Video input [6]
--- AUDIO: AV/ S-Video signal Audio input [6]
Component (YPbPr) connection
YPbPr provides better picture quality than the S-Video or the AV connection.
䋪For YPbPr connection, connect the component video (YPbPr) and audio jacks
to the corresponding
output jacks of your A/V device.
--- VIDEO: YPbPr signal input [3]
--- AUDIO: YPbPr signal audio input [3]
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
13
N2690w
HDMI connection
HDMI (High-Definition Multimedia Interface) is a licensable audio/video connector
interface for transmitting uncompressed, encrypted digital streams between this TV
and any HDMI- equipped audio/video equipment.
䋪Be sure to use only an HDMI cable that bears the HDMI logo.
䋪If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the
HDMI Input Terminal (with DVI-to-HDMI cable or adapter), and connect the Audio cable
to the Audio in jacks.
HDMI cable
DVI-to-HDMI cable
DVI-to-HDMI adapter
Audio cable
1. With HDMI cable: HDMI Input Terminal [7]
2. With HDMI-DVI cable --- VIDEO: HDMI Input Terminal [7]
--- AUDIO: PC Audio input [5]
Computer connection
Connect the VGA cable and Audio cable from the VGA signal input and PC Audio
input to the corresponding ports on your A/V device.
--- VIDEO: VGA signal input [5]
--- AUDIO: PC Audio input [5]
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
14
N2690w
ENGLISH
Getting Started
Getting Started
Connecting the LCD TV
Cable System or VHF/UHF Antenna System
Enjoy the high-definition and standard-definition digital programming along with
standard- definition analog programming.
Ɓ
• This TV is capable of receiving unscrambled digital programming for both cable
and external VHF/UHF antenna.
• We strongly recommend that you connect the antenna/cable input using a 75-ohm
coaxial cable (not supplied) to ensure the best picture quality.
Cable or VHF/UHF
75-ohm coaxial cable
Rear of TV
VHF/UHF/CABLE input
Cable System and VHF/UHF Antenna System
Use an optional A-B RF switch (not supplied) to switch between the cable and
antenna programming, as shown below.
A-B RF switch
Cable
Antenna
Rear of TV
VHF/UHF/CABLE input
Ɓ
• Remember to set the TV/CATV setting in the TV menu to Air or Cable for the type
you choose.
HD Cable Box/HD Satellite Box
You can also enjoy high-definition programming by subscribing to a highdefinition cable service or a high-definition satellite service. For the optimum
picture quality, be sure to connect this device to your TV via the HDMI or
component video (with audio) input on the back of your LCD TV.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
15
N2690w
Getting Started
Ɓ
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to
the HDMI jack [10] and connect the audio jack to the AUDIO In jacks of HDMI
[9],
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
16
N2690w
Getting Started
Personal Computer
Use the LCD TV as the monitor of your computer.
The picture below shows the connection for PC. The LCD TV can also be connected
to PC.
Ɓ
z
z
Connect the PC IN jack to the PC using a 15-pin cable and audio cable.
If the PC is connected to TV and no signal has been input from PC for more
than 30 seconds, the TV will enter standby mode automatically.
PC Timing Reference Chart
6WDQGDUG
0RGH
5HVROXWLRQ
$VSHFW5DWLR+DQGOLQJ
)6)XOO6FUHHQ
720 x 400 @ 70Hz
&RPSDWLDEOH,QSXW
RGB
Yes
VESA
640 x 480 @ 60Hz
1366x768
1366x768
VESA
640 x 480 @ 75Hz
1366x768
Yes
VESA
800 x 600 @ 60Hz
1366x768
Yes
VESA
800 x 600 @ 75Hz
1366x768
Yes
MAC
832 x 624 @ 75Hz
1366x768
Yes
VESA
1024 x 768 @ 60Hz
1366x768
Yes
VESA
1024 x 768 @ 75Hz
1366x768
Yes
VESA
1360 x 768@ 60Hz
1366x768
Yes
Yes
Ɓ
• This TV’s PC VGA input does not support interlaced signals.
• For the best picture quality, we recommend that you use the signals (boldfaced)
in the above chart with a 60 Hz vertical frequency from a personal computer.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
17
N2690w
Getting Started
Other Equipment
Ɓ
• Please refer to the Quick Start Guide (supplied) when connecting the other
equipment to your LCD TV.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
18
N2690w
Using the TV Features
Remote Control and TV Controls
Inserting Remote Control Batteries
ENGLISH
1. Remove the battery cover by pulling then lifting the knob on the cover.
2. Insert the batteries, corresponding to the (+) and (-) markings on the battery
compartment.
3. Reattach the battery cover.
z
z
z
z
z
z
CAUTION
Only use the specified AAA batteries.
Do not mix new and old batteries. This may result in creaking or leakage, which
may pose a risk of fire or lead to personal injury.
Insert batteries according to (+) and (-) markings. Inserting the batteries
incorrectly may result in creaking or leakage, which may pose a risk of fire or
lead to personal injury.
Dispose of the battery in accordance with local laws and regulations.
Keep the batteries away from children or pets.
When the remote control will not to be used for an extended period, remove the
batteries.
Programming your Cable or Satellite Box remote
Refer the user manual from your service provider to determine the setting.
If the requires : ‘
z 3 digits, please try “566”, “565”, “556” or “688”. It usually works with DISHNetwork.
z 4 digits, please try “0054”, It usually works with Cox.
z 5 digits, please try “1154”, 11054”, or 10690”. It usually works with DIRECTV.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
19
N2690w
Using the TV Features
Remote Control and TV Controls
1
Button
Power
2
FAVORITE
CH
3
0~9, - number
buttons
4
5
LAST
INFO
6
7
VOLŸź
EXIT
8
ENTER
ŸźႱ
Ⴇ
menus. ŸźႱ
buttons
9
HDMI
YPbPr
PICTURE
13
MTS
Ⴇ
is for function select,
and is for function adjustment.
Press to turn the OSD (On-Screen
Display) menu on or turn off the OSD
menu.
Press to select HDMI input
Press to select component (YPbPr) input
Press to select Brightness & Contrast
setting.
Press this button to choose the available
sound mode.
MENU
10
11
12
Description
Press this button to turn the power on
from standby mode. Press it again to
return to the standby mode.
Press these buttons to select your
favorite channels that have already been
stored.
Press 0~9 and “-” to select a channel.
After you input the channel numbers,
press ENTER button to direct to the
channel immediately, or wait for 3
seconds to change automatically.
Press to return to previous channel.
Press this button to display the current
state of the LCD TV.
Press to adjust the volume.
Press to turn the OSD (On-Screen
Display) menu off.
Press to confirm the selection in the OSD
menu, or to enter the OSD menu you
select. Press ENTER after you input
channel numbers will change channels
immediately.
Press these buttons to navigate the OSD
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
20
N2690w
Using the TV Features
14
Button
SLEEP
Description
Press repeatedly to set the off timer. The
function is used to automatically shut off
the LCD TV after a preset period of time
passed. There are several times for
choice –Off, 5 min, 10 min, 15 min,
30 min, 45 min, 60 min, 90 min, 120
min, 180 min, or 240min.
15
CH Ÿź
16
MUTE
17
SOURCE
18
GUIDE
19
AV
20
21
TV
WIDE
22
CC
.
Press to change the channels up or
down.
Press to turn off the sound. To restore
the sound, press this button again, or
press the VOL+ button.
Press to display the INPUT source list
and select the source with Ÿź buttons.
To confirm the selection, press ENTER.
Press to display the Electronic Program
Guide (EPG). It contains the program
information for the channel you’re
watching.
Press to select Composite or S-Video
input
Press to select TV input
Press this button repeatedly to select the
screen size. You can select from
Cinema, Normal, Zoom & Wide.
* This function will depend by different
input source.
Press to select the Closed Caption menu
in the TV mode.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
21
N2690w
Using the TV Features
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the Power button on the front of
the panel.
Changing Channels
1. Using Channel Buttons
Press CHźŸ button to change channels, and
the TV changes channels in sequence. You will
see all channels that have been memorized.
Channels erased or not memorized will not be
shown.
2. Using Number Buttons
(1)ATV
The “-” button has no function in ATV mode.
Directly press the number buttons to select
channels.
(2)DTV
Use “-” button to select the sub channel in DTV.
Ex: Your desired number is 80-3.
Press 8 ĺ press 0 ĺ press “-” ĺ press 3.
䋪ʳ Return to the previous channel, press LAST
button.
Adjusting the Volume
Press VOLŸ/źbutton to adjust volume.
To turn off the volume, press MUTE button.
To restore volume, press MUTE button again, or
press VOLŸ/źbutton directly.
Viewing the Displayed Information
To display the current information of the LCD TV:
Press INFO button, and the current state will be
displayed on the screen. (It shows all or some of
the information about Input, Channel, Resolution,
Audio Type, etc., depending on what input source
it is in)
Selecting the TV Signal Source
With the TV on, press SOURCE button on either
the TV or the remote to choose from:
TV, Composite, S-Video, Component, VGA,
HDMI 1.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
22
N2690w
Using the TV Features
Setting the sleep timer
The sleep timer lets you select the amount of time
before your TV turns off automatically.
Press SLEEP button repeatedly to select a sleep
timer function on the remote control. You can select:
Off, 5 min, 10 min, 15 min, 30 min, 45 min, 60
min, 90 min, 120 min, 180 min, or 240min.
To turn off the timer, please select Off.
Viewing closed captions
To view closed captions:
Press CC button repeatedly to select a closed
caption option on the remote control. You can
select:
•CC On
•CC Off
•CC On When Mute
*To select or customize digital closed captions, use the
Digital Closed Caption sub-menus in the Feature menu
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
23
N2690w
Using the TV Features
Storing Channels into Memory
1. Press the MENU button to display the OSD
main menu.
2. Press Ÿ orź to select the “Setup” menu.
Press Ÿ or ź to select “Tuning Band, and use
Ź to select the antenna connection to “Air” or
“Cable”.
Air: “Air” antenna signal programs
Cable: “Cable” antenna signal programs
3. Press Ÿ or ź to select “Auto Ch Search”, then
press Ź to perform Auto Ch Search function.
To stop scanning, press EXIT at any time.
4. The Auto Scan screen will be shown, and after it
is done, the screen will return to the first found
channel.
Viewing the Menus
1. Press the MENU button to display the OSD
main menu. There are Four top menus on the
screen: Setup, Video, Audio, and Feature.
2. Press Ÿorź to select your desired top menu.
3. Press ENTER or Ź to enter the menu you
select.
4. Use Ÿź to select the control you want to adjust.
5. When selecting the control with Ź, press Ź to
enter next level menu or enable the function.
6. Press ŻŹ to adjust or select the settings.
7. Press EXIT to exit from the OSD menu.
Adding a channel label
1. Press MENU. The OSD menu opens with Setup
highlighted.
2. Press to enter the sub-menu, then press or to
highlight “Channel Labels”. The Channel Label
menu opens.
3. Press or to move the cursor to the channel field,
then press or to select a channel.
4. Press or to move the cursor to the label field,
then press or to select the character.
5. Press EXIT to return to the previous menu.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
24
N2690w
Using the TV Features
Setting the clock
1. Press MENU. The OSD menu opens with
“Setup” highlighted.
2. Press or repeatedly to highlight “Feature”. The
Feature menu opens.
3. Press Ź to enter the sub-menu, then press
Ÿorź to highlight “Time Set”. The Time Set
menu opens.
4. Press Ÿorź move to the different fields, then
press ŻorŹ to change the settings.
5. Press EXIT to close the menu.
Setting parental controls
Your TV has a V-chip that lets you control the type
of programs your children can watch. Parental
controls include two ratings: MPAA (based on age)
and TV Parental Guidelines (based on content and
age). A TV program may have an MPAA or TV
Parental Guidelines rating, so you should set
controls for both ratings. Before you can select
ratings, you need to set up a parental controls
password.
To set up a password:
1. Press MENU. The OSD menu opens with Setup
highlighted.
2. Press Ÿorź repeatedly to highlight “Feature”.
The Feature menu opens.
3. Press Ź to enter the sub-menu, then press
Ÿorźto highlight Password Set.
4. Press the number buttons to enter the old
password. If you have not set a password, enter
0000. Press ENTER to continue.
5. Press the number buttons to enter a new
password. Press ENTER to continue.
6. Press the number buttons to enter the new
password again, to confirm. Press ENTER to
continue.
*If you forget your password, enter 3448 for the old
password, then enter a new password. This password
always remains valid for resetting your password.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
25
N2690w
Using the TV Features
Setting the Parental Control level
1. Press MENU. The OSD menu opens with Setup
highlighted.
2. Press Ÿorź repeatedly to highlight “Feature”.
The Feature menu opens.
3. Press Ź to enter the sub-menu, then press
Ÿorź to highlight “Parental Control”.
The Password screen opens.
4. Press the number buttons to enter the password.
Press ENTER to continue. The “Parental Control”
Menu opens.
5. Press Ÿorź to select USA Parental Locks or
Canadian Parental Locks, then press ENTER.
The lock menu that you have selected opens.
6. Press ŻorŹ, Ÿorź to move to a rating, then
press ENTER to select the rating. When you
block a rating, that rating and all higher ratings
are blocked.
7. Press EXIT to close the menu.
American MPAA ratings
Rating
NONE
G
PG
PG-13
R
NC-17
X
Description
Not rated.
General audiences.
Parental guidance
suggested. Some material
may not be suitable for
children.
Parental guidance strongly
suggested. Some material
may not be suitable for
children under 13 years of
age.
Restricted Not suitable for
children under 17 years of
age unless accompanied
by a parent or guardian.
Not suitable for children
under 17 years of age.
Adults only.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
26
N2690w
Using the TV Features
Canadian MPAA ratings
Rating
C
C8+
G
PG
14+
18+
X
Description
Children.
Children 8 years and
above.
General audience.
Parental guidance
suggested.
14 years old and above.
Adult programming.
Adults only.
TV Parental Guidelines ratings
Rating
NONE
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Description
Not rated.
All children.
Children over seven
years.
General audiences.
Parental guidance
suggested.
Parents strongly
cautioned.
Mature audiences only.
Some of the age-based TV Parental Guidelines
ratings also have content-based ratings.
Rating
FV
L
Description
Fantasy violence
Adult language.
S
V
D
Sexual situations.
Violence
Sexually suggestive
dialog.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
27
N2690w
Other Information
Cleaning the LCD TV
• Make sure the LCD TV is turned off.
• Never spray or pour any liquid directly onto the screen or case.
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a
clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive
detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the LCD TV
screen or case. Some chemical cleaners have been reported to damage the screen and/or case of
the LCD TV. ViewSonic will not be liable for damage resulting from use of any ammonia or alcoholbased cleaners
Programming your Cable or Satellite Box remote
Refer the user manual from your service provider to determine the setting.
If the requires : ‘
z 3 digits, please try “566”, “565”, “556” or “688”. It usually works with DISHNetwork.
z 4 digits, please try “0054”, It usually works with Cox.
z 5 digits, please try “1154”, 11054”, or 10690”. It usually works with DIRECTV.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
28
N2690w
Other information
Troubles Shooting
Please contact ViewSonic service team directly if you have questions, service
needs, or require technical assistance related on the use of your television.
Contact ViewSonic Service Team at:
http://www.ViewSonic.com/support/
Or call our service team:
United States 1-800-688-6688
Canada
1-866-463-4775
Problem
No power
Possible Solution
z Make sure the power cord is properly connected LCD
TV AC power socket.
z Make sure the AC power cord is properly connected to
the wall outlet.
z Make sure the DC power button is ON (Blue LED)
z Plug another electrical device (like a radio) to the
power outlet to verify that the outlet is supplying the
proper voltage.
No picture
z The TV station may be experiencing problems. Try
another channel.
z The Cable TV signal may be scrambled or encoded.
Please contact your local cable operator.
z Make sure that connection to other components are
correct referring to the user guide.
z Make sure that setup has been done correctly
after connections.
z Make sure the correct input is selected and the input
signal is compatible.
z Ensure that the video cable is securely connected.
z The picture may appear dim in a brightly lit room.
z Adjust brightness, contrast, saturation (color), and tint
referring to the user guide.
z Check the input signal setting.
z Check your audio connections are properly connected
referring to the user guide.
z The MUTE button may have been pressed, try
pressing this button again.
z Check your audio settings, your TV audio may be set
to minimum.
z Press the Volume + (Up) button on the remote control.
Strange Color, light
color, or color
misalignment
No sound
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
29
N2690w
Other information
Problem
Remote control unit
does not operate
Possible Solution
z Make sure the directions of batteries are inserted
correctly referring to the user guide.
z Batteries could be weak or dead. Replace by new
batteries.
z Is a fluorescent light illuminated near the remote
control sensor?
z The path of the remote control beam may be
blocked. Make sure the path is clear and that the
remote control is aimed at the remote control sensor
on the TV.
z Press the POWER button on the remote control to see
if you can turn on the TV.
z Press MENU button on the remote control to see if
there is a MENU shown on the screen.
z Press only one button at a time and it is the correct one
for the operation you want to perform.
Unit cannot be
operated
z External influences such as lightning or static
electricity may cause improper operation. In this case,
operate the unit after first turning on the power of the
LCD TV and the AVC System, or unplug the AC cord
for 1 to 2 minutes, then replug again.
z Is the sleep timer set in advance?.
z Is there no signal in PC mode or HDMI mode?
z The internal temperature of the unit has increased.
Remove any objects blocking the vent or clean as
necessary.
z Is the AIR/CABLE option set correctly? Please set the
AIR/ CABLE option to CABLE referring to the user
guide.
z CATV is connected improperly or not connected;
please check all the CATV connections.
z The cable TV service is interrupted; please contact
your cable operator.
z Is the image positioned correctly?
z Are screen mode adjustments such as picture size set
correctly?
z Press WIDE button repeatedly on the remote control to
see if you can get the picture you prefer.
Power is cut off
suddenly
No CATV reception (or
no reception above
CH13)
Picture is cut off / with
sidebar screen
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
30
N2690w
Other information
Specifications
Model
LCD
Input signal
Compatibility
Resolution
Speaker
Output
Audio Output
N2690w
26” TFT Active Matrix RGB
0.1405 (H) x 0.4215 (V) mm pixel
Color Filter
RGB vertical stripe
Glass surface
Anti-Glare
RGB analog (0.7/1.0 Vp-p, 75 ohms)
RGB
Separate Sync, fh: 30-80 kHz, fv:50-75 Hz
TV system Antenna / NTSC+ATSC, TV cable system /
RF
CATV+Digital cable
Video
1composite RCA, 1 S-Video,
1 YPbPr component, 1 HDMI
Audio
1 mini-stereo,
2 pairs of RCA (L/R) stereo
PC
Up to 1360 x 768 @ 60 Hz, VGA mode
Recommended 1360 x 768 @ 60 Hz
and supported
1024 x 768 @ 60, 75 Hz
(VGA mode)
832 x 624 @ 75 Hz.
800 x 600 @ 60, 75 Hz
640 x 480 @ 60, 75 Hz
720 x 400 @ 70 Hz
5W x 2 @ THD=10%
Type
1 Headphone jack
1 SPDIF
Voltage
Power
100-240 VAC, 50/60 Hz (auto switch)
Full Scan
576mm(H) x 324mm (V)
Display area
22.7” (H) x 12.8” (V)
Temperature
Operating
32°F to + 104°F ( 0°C to + 40°C)
Humanity
conditions
20% to 65% (no condensation)
Altitude
To 10,000 feet (3,000m)
Storage
Temperature
-4°F to + 140°F (-20°C to + 60°C)
conditions
Humanity
10% to 90% (no condensation)
Altitude
To 40,000 feet (12,000m)
Dimensions
Physical
652mm x 482mm x 189mm
(W)x(H)x(D)
25.7’’ x 19.0’’ x 7.4’’
Net
Weight
8.8 kg (19.4 lb)
Regulations
UL/cUL, FCC-B (Doc-B), BETS-7
On
Power
< 120 W (blue LED)
Stand by
consumption r
< 1 W (red LED)
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may
result in permanent damage to the LCD TV.
Note: Product Specifications are subject to change without notice.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
31
N2690w
Other information
Limited Warranty
VIEWSONIC® LCD TV
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty
period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option
repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or
components.
How long the warranty is effective:
ViewSonic LCD TV are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of
the first customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1.
Any product on which the serial number has been defaced, modified or removed.
2.
Damage, deterioration or malfunction resulting from:
a.
b.
c.
d.
e.
f.
g.
h.
3.
4.
5.
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by ViewSonic.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuations or failure.
Use of supplies or parts not meeting ViewSonic’s specifications.
Normal wear and tear.
Any other cause which does not relate to a product defect.
Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the
product for an extended period of time.
Removal, installation, and set-up service charges.
When you mount it on the wall, the following must be noticed:
a. The accessories attached with this product are applicable for this product only.
b. When the product is mounted on the wall, holes and fixed screws will remain in the wall body.
c. Wall face may discolor when this product has been mounted on the wall for a long time.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support. You will need to provide your
product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address,
(d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of
merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product,
loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or
other commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do
not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above
limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local
ViewSonic dealer.
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is subject to the terms and
conditions of the Maintenance Guarantee Card.
For users in Europe and Russia, full details of warranty providedcan be found in www.viewsoniceurope.com under Support/Warranty
Information..
4.3 :ViewSonic LCD TV Warranty
LTV LW01 Rev 1C 06-25-07
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
32
N2690w
Other information
Mexico Limited Warranty
VIEWSONIC® LCD TV
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty
period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option,
repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or
components & accessories.
How long the warranty is effective:
ViewSonic LCD TVs are warranted for 1 year for all parts excluding the light source and 1 year for labor from the date of the first
customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1.
Any product on which the serial number has been defaced, modified or removed.
2.
Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, unauthorized
attempted repair, or failure to follow instructions supplied with the product.
b. Any damage of the product due to shipment.
c. Causes external to the product, such as electrical power fluctuations or failure.
d. Use of supplies or parts not meeting ViewSonic’s specifications.
e. Normal wear and tear.
f.
Any other cause which does not relate to a product defect.
3.
4.
Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the
product for an extended period of time.
Removal, installation, insurance, and set-up service charges.
How to get service:
For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer
Support page). You will need to provide your product’s serial number, so please record the product information in the space provided
below on your purchase for your future use. Please retain your receipt of proof of purchase to support your warranty claim.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
Extended Warranty Purchase?
(Y/N)
If so, what date does warranty expire?
1.
2.
3.
To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your
address, (d) a description of the problem, and (e) the serial number of the product.
Take or ship the product in the original container packaging to an authorized ViewSonic service center.
Round trip transportation costs for in-warranty products will be paid by ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of
merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the
product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business
relationships, or other commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4. Repair or attempted repair by anyone not authorized by ViewSonic.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
33
N2690w
Other information
Index
ŸźŻŹ buttons 20
0~9, - number buttons 20
N
O
A
AC input 12
AV Audio input 12
AV/ S-Video signal Audio input 12
B
P
PC Audio input 12
Power LED Indicator 11
Power ON/OFF button 11, 20
Q
C
R
CC button 21, 23
CH Down button 11, 21, 22
CH Up button 11, 21, 22
Composite Video input 12
Remote Control Receiver 11
Remote Control and TV Control 19-23
S
ENTER button 20
S-Video Audio input 12, 13
S-Video input 12, 13
SLEEP button 20, 23,
Storing Channels into Memory 24
SOURCE button 11, 21, 22
F
T
FAV button 20
TV Input Jack 12
TV button 21
G
U
D
E
GUIDE button 21
H
HDMI Input Terminal 12
Headphone Jack 16
V
VGA signal input 12
Viewing the Menus 24
Volume Down button 11, 20, 22
Volume Up button 11, 20, 22
I
INFO button 20
J
W
WIDE button 21
X
K
L
Y
YPbPr Audio input 12
YPbPr signal input 12
LAST button 20
M
MENU button 11, 20
MTS button 20
MUTE button 21, 22
Z
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Downloaded From TV-Manual.com Manuals
34
N2690w
ViewSonic
®
Downloaded From TV-Manual.com Manuals