Raloy RF117HD Series User manual

User Manual
RF117HD - Series
Features & Benefits:







1U short depth design console, server rack or relay rack mounted
Modular scalability: KVM Switch, Peripherals & More
Combo interface w/ PS/2 or USB input w/ front USB port access
17" LED LCD w/ Full HD Hi-Resolution (1920 x 1080)
PIP & Picture by Picture via green LED-backlit panel technology
New easy maneuver front handle
6 foot Combo KVM cable included
Modular Scalability





Multi-platform KVM switch capability: PS/2, USB or Sun
Mouse: Touchpad(e) or Trackball(b)
Keyboard available in 13 languages
DC power options: 48V, 24V or 12V
VGA or DVI Broadcast-grade input
o or S-Video + Composite (BNC)
o or HDMI with speaker or Audio
www.Raloy.com
1 (866) 395-5927
Contents
Chapter 1 Getting Started............................................................................................................................ 4
1.1
Important Safeguards ............................................................................................................................................ 4
Safety Instructions ............................................................................................................................................................................................ 4
1.2
Regulatory Notice ................................................................................................................................................... 5
Regulatory Notices Federal Communications Commission (FCC) ................................................................................................................... 5
1.3
Package Contents .................................................................................................................................................. 6
1.4
Before Installation .................................................................................................................................................. 6
1.5
Unpacking & Cleaning the Monitor ..................................................................................................................... 6
1.6
Structure Diagram .................................................................................................................................................. 7
1.7
Installation ............................................................................................................................................................... 8
4 point rack brackets ........................................................................................................................................................................................ 7
2 post rack brackets ......................................................................................................................................................................................... 8
1.8
How to Use the Slides.......................................................................................................................................... 10
1.9
How to Use the LCD Keyboard Drawer ............................................................................................................ 11
1.10
Connecting the RF117HD to Your Server ........................................................................................................ 12
1.10.1
1.10.2
1.10.3
1.10.4
1.10.5
RF117HD Connection to USB/DVI-D server via RCX-6 Cable............................................................................................................ 12
RF117HD Connection to External USB/DVI-D KVM via RCX-6 Cable................................................................................................ 12
RF117HD Connection to USB/VGA server via RCB-6 cable .............................................................................................................. 13
RF117HD Connection to external USB/VGA KVM via RCB-6 cable .................................................................................................. 13
RF117HD Connection to HDMI Device via HDMI cable* .................................................................................................................. 14
Chapter 2 Operation................................................................................................................................... 15
2.1
On-screen Display Operation ............................................................................................................................. 15
2.2
On-screen Menus ................................................................................................................................................. 16
2.3
How to Use Picture-in-Picture (PIP) / Picture-by-Picture (PBP) Functionality.......................................... 17
2.3.1 Picture-in-Picture (PIP) Operation ........................................................................................................................................................ 17
2.3.2 Picture-by-Picture (PBP) Operation ...................................................................................................................................................... 18
2.3.3 PIP/PBP Sources * ................................................................................................................................................................................. 18
Chapter 3 Standard Specifications .......................................................................................................... 19
3.1
Specifications................................................................................................................................................... 19-19
3.2
Keyboard & Mouse Layouts .......................................................................................................................... 20-22
Chapter 4 Optional Specifications ........................................................................................................... 20
4.1
KVM Integration Options ..................................................................................................................................... 21
4.2
Audio Input Option ............................................................................................................................................... 21
4.3
3G / HD / SD-SDI input ......................................................................................................................................... 22
4.4
DC Power Options ................................................................................................................................................ 23
2
www.Raloy.com
1 (866) 395-5927
Chapter 5 Dimensions ............................................................................................................................... 24
3
www.Raloy.com
1 (866) 395-5927
Chapter 1 Getting Started
1.1
Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the
correctness of the contents. The information in this document is subject to change without notice. We are not
liable for any injury or loss that results from the use of this equipment.
Safety Instructions
 Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
 Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned
environment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
 When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
 When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it and
the power supply. Proper air convection is necessary to keep it from overheating.
 Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
 If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and
current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher
than the one listed on the equipment’s ratings label.
 Observe all precautions and warnings attached to the equipment.
 If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
 Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled onto the
power supply or on other hardware may cause damage, fire or electrical shock.
 Only qualified service personnel should open the chassis. Opening it yourself could damage the
equipment and invalidate its warranty.
 If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service
personnel.
CAUTION: Slide/rail mounted equipment is not to be used as a shelf or a work space.
What the warranty does not cover



Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
o Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
o Repair or attempted repair by anyone not authorized by us.
o Any damage of the product due to shipment.
o Removal or installation of the product.
o Causes external to the product, such as electric power fluctuation or failure.
o Use of supplies or parts not meeting our specifications.
o Normal wear and tear.
o Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
4
www.Raloy.com
1 (866) 395-5927
1.2
Regulatory Notice
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:



Re-position or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
5
www.Raloy.com
1 (866) 395-5927
1.3
Package Contents




RF117HD – 1 Unit
1 x CX-6 6ft DVI-D console cable (standard)
(Alternative: CB-6 6ft VGA console cable - available on request)
1 x Power Cord
8 x M6 screw, cage nut & cup washer
Additional or fewer parts may be included depending on optional accessories such as integrated
KVM, SDI capability, audio inputs and/or DC power options.
1.4



1.5
Before Installation
It is very important to place the LCD Keyboard Drawer in a suitable environment.
The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or mounted into a
suitable cabinet.
Make sure the location is well ventilated, out of direct sunlight, away from sources of excessive dust, dirt,
heat, water, moisture and vibration.
Unpacking & Cleaning the Monitor
The LCD keyboard drawer comes with the standard parts as listed in the package contents. Check and make
sure they are included and in good condition. If anything is missing, or damaged, contact the supplier
immediately.
How to Clean Your LCD Monitor
CAUTION:





To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet
When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood
based paper product such as paper towels can scratch your LCD screen.
Cleaning your Monitor
To safely clean your LCD, please follow these steps:
1. Disconnect power cord.
2. Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps:
1. Disconnect the power cord.
2. Spray a small amount of non-abrasive cleanser on a microfiber cloth.
3. Gently wipe the surface. Use as little pressure as possible.
4. Wait until your monitor is completely dry before plugging it in and powering it up.
Caution: Do not spray or apply any liquids directly onto the monitor. Always apply the solution to
your microfiber cloth first, not directly on the parts you are cleaning.
6
www.Raloy.com
1 (866) 395-5927
1.6
Structure Diagram
7
www.Raloy.com
1 (866) 395-5927
1.7
Installation
1

Insert the left and right rear mounting
brackets into the LCD console drawer.

Measure the depth of the front and rear
mounting rails.
Align each rear mounting bracket to a
suitable length.
2

Complete the installation
3

Fix the LCD console drawer into the
rack with the 8 supplied M6 screws,
cage nuts & cup washers.
8
www.Raloy.com
1 (866) 395-5927
1.7a Alternative Installation w/ Optional 2 post rack brackets (Part Number: MB-751-12)
1


Release front mounting ears before
applying 2 post rack brackets.
Insert rear mounting brackets into the
LCD console drawer.
2

Align each rear mounting bracket to a
suitable length.

Fix the LCD console drawer into the 2
post rack with 8 x M6 screws, cage nuts
& cup washers (not provided).
Complete the installation
3
9
www.Raloy.com
1 (866) 395-5927
1.8
How to Use the Slides

A black arrow release button is
located on the outside of each slide.
(Shown in Figure 1).

Pull and hold the black arrow button
on either side of the LCD keyboard
drawer to unlock.
(Shown in Figure 2).

Push the LCD keyboard drawer into
the rack.
(Shown in Figure 3).
Figure 1.
Figure 2.
Figure 3.
Caution : Keep your fingers away from the slide stop
10
www.Raloy.com
1 (866) 395-5927
1.9
How to Use the LCD Keyboard Drawer

Gently pull the tab toward the front
of the LCD.
(Shown in Figure 4)

Flip up the LCD to a suitable angle.
(Shown in Figure 5)

Operate the LCD keyboard drawer.
(Shown in Figure 6)
Figure 4. Sliding out the LCD keyboard drawer by pulling the
tab toward the front of LCD.
Figure 5. Flipping up the LCD to a suitable angle.
Figure 6. Operating the LCD keyboard drawer
11
www.Raloy.com
1 (866) 395-5927
1.10 Connecting the RF117HD to Your Server
1.10.1 RF117HD Connection to USB/DVI-D server via RCX-6 Cable (included with console)
Use RCX-6 to connect to a USB/DVI-D server
Figure 7. Example of connecting RCX-6 DVI console cable to server via USB/DVI-D interface
1.10.2 RF117HD Connection to External USB/DVI-D KVM via RCX-6 Cable (included with console)
Use RCX-6 to connect to an external USB/DVI-D KVM
Figure 8. Example of connecting RCX-6 DVI console cable to external KVM via USB/DVI-D interface
Remarks:
The above connections are for the LCD keyboard only, without the integrated KVM switch.
For the LCD keyboard drawer with built-in KVM switch, please refer to the accompanying KVM switch
user manual.
Caution: The LCD keyboard drawer is hot-pluggable, but components of connected devices, such as the servers
and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered
on may cause irreversible damage to the servers, KVM and LCD keyboard drawer. Before attempting to connect
anything to the LCD keyboard drawer, we suggest turning off the power to all devices before connecting them.
Apply power to connected devices again only after the LCD keyboard is receiving power. The company, supplier
and/or manufacturer is not responsible for damages caused in this way.
www.Raloy.com
12
1 (866) 395-5927
1.10.3 RF117HD Connection to USB/VGA server via RCB-6 cable (available on request)
Use RCB-6 to connect to USB/VGA server
Figure 9. Example of connecting RCB-6 2-in-1 USB KVM cable to server via USB/VGA interface
1.10.4 RF117HD Connection to external USB/VGA KVM via RCB-6 cable (available on request)
Use RCB-6 to connect to external USB/VGA KVM
Figure 10. Example of connecting RCB-6 2-in-1 USB KVM cable to external KVM via USB/VGA interface
Remarks:
The above connections are for the LCD keyboard only, without the integrated KVM switch.
For the LCD keyboard drawer with built-in KVM switch, please refer to the accompanying KVM switch
user manual.
Caution: The LCD keyboard drawer is hot-pluggable, but components of connected devices, such as the servers
and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered
on may cause irreversible damage to the servers, KVM and LCD keyboard drawer. Before attempting to connect
anything to the LCD keyboard drawer, we suggest turning off the power to all devices before connecting them.
Apply power to connected devices again only after the LCD keyboard is receiving power. The company, supplier
and/or manufacturer is not responsible for damages caused in this way.
www.Raloy.com
13
1 (866) 395-5927
1.10.5 RF117HD Connection to HDMI Device via HDMI cable*
 Use an HDMI Cable to connect to an HDMI device
Figure 11. Example of connecting an HDMI cable to a device via the HDMI interface
Remarks:



Without optional Audio input/output module, audio input is only available through HDMI interface.
The above connections are for the LCD keyboard only, without the integrated KVM switch.
For the LCD keyboard drawer with built-in KVM switch, please refer to the accompanying KVM switch
user manual.
Caution: The LCD keyboard drawer is hot-pluggable, but components of connected devices, such as the servers
and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered
on may cause irreversible damage to the servers, KVM and LCD keyboard drawer. Before attempting to connect
anything to the LCD keyboard drawer, we suggest turning off the power to all devices before connecting them.
Apply power to connected devices again only after the LCD keyboard is receiving power. The company, supplier
and/or manufacturer is not responsible for damages caused in this way.
14
www.Raloy.com
1 (866) 395-5927
Chapter 2 Operation
2.1
On-screen Display Operation
LCD membrane
Membrane Switch
Function
Turn monitor on or off
Display the OSD Menu
Enter key for making OSD menu selections
Scroll through options and adjust the displayed control
Exit the OSD menu
Go back to previous on-screen menu or submenu
Notes: All LED Touch Buttons appear in white light.
All LED Touch Buttons (except power
) will shut off automatically after 10 minutes of inactivity.
To light up all Touch Buttons, press any button (except power
The Power LED touch button
) for 1-2 seconds.
will flash continuously when there is no signal input to indicate a problem.
15
www.Raloy.com
1 (866) 395-5927
2.2
On-screen Menus
OSD Menu 1 - Picture
Picture mode:
Standard / Vivid / Soft / User mode Select
Brightness:
Adjust background black level of the screen image
Contrast:
Adjust the difference between the image contrast
Hue:
Adjust the screen hue value
Saturation:
Adjust the saturation of the image color
Picture size:
Adjust the image size
Color temp:
Standard / Cool / Warm / User Select
Noise reduce:
Reduce the noise of the image
Sharpness:
Adjust the image from weak to sharp
OSD Menu 2 - PC
Auto adjust:
Automatically center align, adjust size and fine tune the
video signal to eliminate waviness and distortion
Clock:
Adjust the clock value
Phase:
Adjust the phase value
H. Position:
Align the screen image left or right
V. Position:
Align the screen image up or down
OSD Menu 3 - Audio
Audio mode:
Movie / Voice / Normal / Music mode select
Volume:
Adjust the volume of sound
Bass:
Set the value of bass sound
Treble:
Set the value of treble sound
Balance:
Set the left/right balance of sound
Analog TV audio:
Set the value of analog TV audio sound
Mute:
Turn sound off
OSD Menu 4 - Misc
Language:
Select the language in which the OSD menu is displayed
Sleep timer:
Set the shut-off timer
PIP mode:
Adjust Picture in Picture (PIP) setting
PIP position:
Change the PIP positions
PIP source:
Select secondary picture and sound source
System reset:
Return all selections to factory default settings
Information:
Select for additional help
16
www.Raloy.com
1 (866) 395-5927
2.3
How to Use Picture-in-Picture (PIP) / Picture-by-Picture (PBP) Functionality
2.3.1 Picture-in-Picture (PIP) Operation
PIP mode allows a smaller sub-screen to be displayed within the main screen.
Position
Adjust the position of the Sub screen (top left, bottom left, top right, bottom right)
OSD Menu → MISC → PIP Position → top left / top right / bottom left / bottom right
Size
Adjust the size of the Sub screen (Large / Small)
OSD Menu →MISC →PIP Mode → Large / Small
Main Screen Resolution
1920 x 1200
1920 x 1080
1440 x 900
1366 x 768
1280 x 1024
Large Sub Screen
552 x 414
552 x 414
414 x 310
392 x 294
368 x 276
Small Sub Screen
480 x 360
480 x 360
360 x 270
340 x 254
320 x 240
17
www.Raloy.com
1 (866) 395-5927
2.3.2 Picture-by-Picture (PBP) Operation
PBP mode allows the sub-screen to be displayed next to the main screen
.
Size
Adjust the size of the Sub screen (Large / Small)
OSD Menu →MISC →PIP Mode → Large / Small
Selected LCD Resolution
1920 x 1200
1920 x 1080
1440 x 900
1366 x 768
1280 x 1024
Main/Sub Screens
955 x 716
955 x 716
715 x 536
678 x 508
635 x 476
2.3.3 PIP/PBP Sources *
To select an input signal for PIP / PBP Sub screen
OSD Menu → MISC → PIP Source → VGA / S-Video / Composite / DVI / HDMI / SDI / YPbPr / TV
Main \ Sub
VGA
S-Video
Composite
DVI-D
HDMI
SDI
YpbPr
TV
VGA
S-Video
Composite
DVI-D
HDMI
SDI
YPbPr
TV
X
O
O
O
O
O
O
O
O
X
X
O
O
O
O
X
O
X
X
O
O
O
O
X
O
O
O
X
X
O
O
O
O
O
O
X
X
O
O
O
O
O
O
O
O
X
X
O
O
O
O
O
O
X
X
O
O
X
X
O
O
O
O
X
* Please note: Not all inputs may be available, depending on options selected.
18
www.Raloy.com
1 (866) 395-5927
Chapter 3 Standard Specifications
3.1
Specifications (Console Unit Only – additional options may change some specs)
LCD Panel
Video
Connectivity
Video
Formats
Panel Size (diagonal)
17.3-inch Widescreen TFT color LCD
Display pixel (dots x lines)
1920 x 1080
Brightness (typ.)
300
Contrast Ratio (typ.)
600:1
Color
1.07 billion, 10-bit
Viewing Angle (L/R/U/D)
178° x 178°
Response Time (ms)
35
Dot pitch (mm)
0.199
Display Area (mm)
381.9H x 214.8V
Surface treatment
Anti-glare, Hard-coating
Surface hardness
3H
Backlight Type
LED
MTBF (hrs)
50,000
Digital
HDMI
HDMI 1.1, CEA-861-D
DVI
DVI-D, TMDS single link
Analog
VGA
Analog 0.7Vp-p
Plug & Play
DVI / VGA
VESA EDID structure 1.3
Synchronization
VGA
Separate, Composite & SOG
DVI-D / VGA Input
PC Signal
1920 x 1080 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
HDMI Input
PC Signal
Same as VGA
Video Signal
1080p : 60Hz
720p : 50 / 60Hz
480p : 60Hz
576p : 50Hz
Audio Signal
2ch Linear PCM (32/44.1/48 KHz)
19
www.Raloy.com
1 (866) 395-5927
3.1
Specifications (cont.)
Audio
Connectivity
Audio Input (requires –Audio option)
Audio Output (requires –Audio option)
Connector
3.5mm stereo jack
Impedance / Power level
30kΩ/ 750mV
Connector
3.5mm stereo jack
Resistance / Power level
30kΩ/ 2.8V
Speaker Output (requires use of HDMI Power
2 x 2W
input or –Audio option)
***When the audio output is connected, speaker output is OFF
Power
Power Supply
Range
Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption
Screen display ON
34W or less
Power saving mode
4W or less
Power button OFF
1W or less
Regulatory
Safety Approval & Environmental
FCC & CE, RoHS2 & REACH compliant
Environmental
Conditions
Operating
Temperature
0 to 50°C degree
Humidity
20~90%, non-condensing
Temperature
-5 to 60°C degree
Humidity
5~90%, non-condensing
Shock
10G acceleration (11ms duration)
Vibration
5~500Hz 1G RMS random
Storage
Physical
Specification*
Product ( W x D x H )
(additional options
may increase weight
and/or size)
Max. Mounting Depth
17.4 x 18.9 x 1.73 inch
442 x 480 x 44 mm
Console unit only 29.5 inch (749.3 mm)
w/ integrated KVM 34.5 inch (876.3 mm)
Packing ( W x D x H )
23.2 x 31.8 x 5.5 inch
590 x 808 x 140 mm
Net Weight
24 lbs / 10.8 kgs
Gross Weight
34.8 lbs / 15.8 kgs
20
www.Raloy.com
1 (866) 395-5927
3.2
Keyboard & Mouse Layouts
Standard Keyboard / Mouse Specifications
Supported layouts:
N: keyboard with Touchpad
E: keyboard with Trackball
Key force
55 ± 5g
Travelling distance
3 ± 0.3mm
Switch life
> 10 million life cycle time
Software support
MS Windows 7 / 2008 / 2003 / 2000 / XP / ME / 98 / DOC / Linux / Mac
www.Raloy.com
1 (866) 395-5927
3.2 Keyboard & Mouse (Cont.)
MAC Style Keyboard / Mouse Specifications
Supported layouts:
MAC keyboard with Touchpad

MAC keyboard with Trackball
USA layout only
MAC keyboard specific Keys
3.2
F1
Decrease display brightness
F9
Fast-forward
F2
Increase display brightness
F10
Mute sound
F3
Mission control
* Only works with OS X Lion
default Keyboard Shortcuts.
F11
Decrease volume
F4
Dashboard
F12
Increase volume
F7
Rewind
Eject disc
F8
Play / Pause
Command
Keyboard & Mouse (Cont.)
SUN Style Keyboard / Mouse Specifications
Supported layouts:
19
www.Raloy.com
1 (866) 395-5927
SUN keyboard with Touchpad
SUN keyboard with Trackball
S keyboard integrated with touchpad / trackball
 Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
 104 key notepad keyboard with full numerical pad and SUN function
 USB interface
 USA layout only
Num LED in Off mode
Key pad behaves as a SUN Solar system
administration command mode
Num LED in Green mode
Key pad behaves as a normal key pad mode
Additional SUN specific Keys
F9
Audio : Mute
Display : Degauss
F12
Audio : Increase volume
Display : Increase contrast
F11
Audio : Decrease volume
Display : Decrease contrast
Chapter 4 Optional Specifications
20
www.Raloy.com
1 (866) 395-5927
4.1
KVM Integration Options
Our KVM is designed to seamlessly integrate into the rear of our full range of LCD drawer solutions:

For KVM operation, please refer to the KVM user manual
4.2
Audio Input Option
3.5mm audio jacks for audio in & out, and 2W + 2W speakers
For audio option, casing depth will be changed from 480mm ( 18.9" ) to 530mm ( 20.9" )
Remarks:
 Audio input is 3.5mm audio plug.
 The speaker shares power with the LCD.
 Internal speakers are not available when integrated KVM options are added.
 For KVM + Audio support, select the RF117HD-1201D DVI-D KVM w/audio option
(requires external speakers)
21
www.Raloy.com
1 (866) 395-5927
4.3
3G / HD / SD-SDI input
Raloy’s SDI input is an ideal solution for the broadcast grade
video and high resolution CCTV market.
Designed for use with Raloy’s Full HD 1080p and ultra-high
resolution 1920 x 1200 LCD displays, the optional SDI input
module provides superior, broadcast quality video without using
additional power. The SDI module comes standard with Raloy’s
2-year warranty.
For SDI option, casing depth will be changed from 480mm ( 18.9" ) to 530mm ( 20.9" )
Input
Standard Compliance
Compatible Video Format
Compatible Audio Format
Max. Transmission Distance
75 ohm coaxial cable
3G-SDI IN
BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT
BNC x 1 / Active through, equalized & relocked
Video
SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio
SMPTE 299M / 272M-C
3G-SDI
1080p
1080p
1080i
720p
@60 / 50Hz, 4:2:2
@30 / 25 / 24Hz, 4:4:4
@60 / 50Hz, 4:4:4
@60 / 50Hz, 4:2:2
HD-SDI
1080p
1080i
720p
@30 / 25 / 24Hz, 4:2:2
@60 / 50Hz, 4:2:2
@60 / 50Hz, 4:2:2
SD-SDI
480i
@60 / 50Hz, 4:2:2
ITU-R BT.656
576i
@50Hz, 4:2:2
3G-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /
Asynchronized Video
3G-SDI
150m at 2.97Gb/s
HD-SDI
250m at 1.485Gb/s
SD-SDI
480m at 270Mb/s
22
www.Raloy.com
1 (866) 395-5927
4.4
DC Power Options
Model
12V
24V
48V
Input voltage:
12-Volt
24-Volt
48-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
- No load
50 mA
50 mA
50 mA
- Full load
4950 mA
2450 mA
1220 mA
Output voltage:
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
Efficiency
84%
85%
85%
Input rating
Input current
Output rating
Remarks:
 Package does not include power cord and AC power adapter
 Casing depth will be extended from 480mm ( 18.9" ) to 530mm ( 20.9" )
23
www.Raloy.com
1 (866) 395-5927
Chapter 5 Dimensions
Model
RF117HD
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net Weight
Gross Weight
441.6 x 480 x 44 mm
17.4 x 18.9 x 1.73"
590 x 708 x 140 mm
23.2 x 31.8 x 5.5"
10.8 kg
23.8 lb
15.8 kg
34.8 lb
1. The weight is only for the single console models and will vary with accessories & options
such as integrated KVM, SDI, audio input and DC power options.
2. The depth may also change when additional options are added to the unit such as
integrated KVM, SDI and audio input
Front View:
Side View:
Top View:
24
www.Raloy.com
1 (866) 395-5927
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in
this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2014 Raloy All rights reserved.
25
www.Raloy.com
1 (866) 395-5927