Agilent 4294A Precision Impedance Analyzer, 40 Hz to

Agilent 4294A Precision
Impedance Analyzer,
40 Hz to 110 MHz
Configuration Guide
Ordering Guide
The following steps will guide you through configuring your 4294A.
Standard Furnished Item
Description
CD-ROM Manual
100 ohm resistor
Additional Information
Contains Operation and Programming manuals in PDF. See documentation option
for printed manuals.
100 Ω load resistor module for 4-terminal pair extension. See Available Accessories
(General/Miscellaneous Measurement Accessories) for additional information.
Power Cable
Certificate of Calibration
Note: The following are not furnished: Printed copies of Operation Manual, Programming Manual, I-Basic User’s Handbook, Test Fixture and Keyboard.
Refer to Accessory Option, Documentation Option and Available Accessories for the selection of these items.
Step 1. Choose Hardware Option (Mandatory)
Description
Option No.
Requires
Standard Frequency Reference
4294A-800
None
Not
Compatible
4294A-1D5
High Stability Frequency
Reference
4294A-1D5
None
4294A-800
Bottom Feet
No Bottom Feet
4294A-801
4294A-802
None
None
4294A-802
4294A-801
Additional Information
Standard Frequency Reference
is installed.
This option improves the frequency
accuracy and stability of the 4294A.
BNC Adapter is supplied with 4294A-1D5.
Includes Bottom Feet
No Bottom Feet
Note: Refer to Hardware Upgrade for retrofit information on the above options.
Step 2. Choose Accessory Option (If not required, go to Step 3)
Description
Option No.
Requires
Rackmount Kit
Front Handle Kit
4294A-1CM
4294A-1CN
None
None
Handle/Rackmount Kit
4294A-1CP
None
Keyboard
4294A-810
None
Not
Compatible
4294A-1CP
4294A-1CP
4294A-1CM
4294A-1CN
None
Additional Information
Adds Rackmount kit
Adds Front Handle kit
Adds Handle/Rackmount kit
Adds Keyboard
Note: Refer to Hardware Upgrade for retrofit information on the above options.
Step 3. Choose Documentation Option (If not required, go to Step 4)
Description
Option No.
Additional Information
U.S. - English Localization
4294A-ABA
Printed manuals. 4294A-ABA/ABJ contains the Operation Manual,
Programming
Manual, I-Basic User’s Handbook and Sample Program Disk.
Japan - Japanese Localization 4294A-ABJ
Service Manual
4294A-0BW Printed copy of service manual
Step 4. Choose Calibration Certificate Option (If not required, go to Step 5)
Description
Option No.
Additional Information
ISO 17025 compliant
4294A-1A7
ISO 17025 compliant calibration
calibration
ANSI Z540 Compliant Calibration 4294A-A6J
ANSI Z540 compliant calibration
Step 5. Choose Warranty Plan
1-year Return-to-Agilent Warranty and Service Plan are standard. For extended warranty options and additional
information, contact your local Agilent sales office or visit the Agilent home website.
2
Hardware Upgrade
Upgrade
Model No. or
Equivalent Part
Number
Customer
Installable
Requires
(Instrument
must already
include the
following)
Not
Compatible
Additional
Information
Option No.
Description
4294A-1D5
High Stability
Frequency
Reference
4294U-1D5
No
4294A-800
None
Installable at
service center
only
4294A-801
Bottom Feet
5041-9167
1460-1345
5021-2840
5041-9173
Yes
4294A-802
None
Required Qty 4
Required Qty 2
Required Qty 4
Required Qty 2
4294A-1CM
Rackmount Kit
5063-9216
Yes
None
4294A-1CP
4294A-1CN
Front Handle Kit
5063-9229
Yes
None
4294A-1CP
4294A-1CP
Handle/
Rackmount Kit
5188-4430
Yes
None
4294A-1CM
4294A-1CN
4294A-810
Keyboard
(Mini-DIN)
1150-7970
Yes
None
None
Available Accessories – General/Miscellaneous Measurement Accessories
Description
Model Number
Requires
(Instrument
must already
include the
following)
Impedance Probe Kit
42941A
None
40 Hz-110 MHz Impedance Probe Kit. Contains Pin Probe,
Spare Pin Set, BNC-SMB Adapter, 3.5 mm Short and Load
terminations, clip lead, grounding lead, carrying case and
Operation and Service manual.
42941A-ABA
None
U.S. – English localization
42941A-ABJ
None
Japan – Japanese localization
42942A
None
40 Hz – 110 MHz Terminal Adapter for using RF
component test fixtures such as the 16092A, 16192A,
16194A, 16196A/B/C/D and 16197A. Operation Note
is furnished.
42942A-700
None
Adds 7 mm open/short/load terminations set
42942A-ABA
None
U.S. – English localization
42942A-ABJ
None
Japan – Japanese localization
16048G
None
1 m BNC connector leads. DC – 110 MHz. Usable with the
4294A only.
16048G-001
None
Adds BNC Bracket
16048G-ABA
None
U.S. – English localization
16048G-ABJ
None
Japan – Japanese localization
4-Terminal to 7 mm
Terminal Adapter
Test Leads
Additional Information
3
Available Accessories – General/Miscellaneous Measurement Accessories – continued
Description
Model Number
Requires
(Instrument
must already
include the
following)
Test Leads
16048H
None
2 m BNC connector leads. DC – 110 MHz. Usable with the
4294A only
16048H-001
None
Adds BNC Bracket
16048H-ABA
None
U.S. - English localization
16048H-ABJ
None
Japan – Japanese localization
SMD Test Fixture
16034E
None
For SMD; (0.1 to 8)L x (0.5 to 10)W x (0.5 to 10)H mm.
DC – 40 MHz. Operation and Service Manual is furnished.
SMD Test Fixture
16034G
None
For SMD; (0.1 to 5)L x (0.3 to 1.6)W x (0.3 to 1.6)H mm.
DC - 110 MHz. 100 Ω SMD resistors set is furnished.
16034G-ABA
None
U.S. - English localization
16034G-ABJ
None
Japan – Japanese localization
SMD Test Fixture
16034H
None
For Array-type SMD; (0.1 to 5)L x (≤ 15)W x (0.6 to 3)H mm.
DC – 110 MHz. 100 Ω SMD resistors set and Operation
Manual are furnished.
SMD Test Fixture
16044A
None
Kelvin contact test fixture for SMD; (1.6 to 8)L x (0.8 to
8)W x (0.8 to 3)H mm. DC – 10 MHz.
16044A-ABA
None
U.S. – English localization
16044A-ABJ
None
Japan – Japanese localization
16047A
None
For axial or radial lead device. DC – 13 MHz. Operation
and Service Manual is furnished.
16047A-701
None
Adds Shorting plate
16047D
None
For axial or radial lead device. DC – 40 MHz. Operation
and Service Manual is furnished.
16047D-701
None
Adds Shorting plate
16047E
None
For axial or radial lead device. DC – 110 MHz.
16047E-ABA
None
U.S. – English localization
16047E-ABJ
None
Japan – Japanese localization
Tweezers Test Fixture
16334A
None
For SMD; ≤ 10 mm L. Tweezers type; cable length 1 m.
DC – 15 MHz. Shorting block and Operation and Service
Manual are furnished.
Kelvin Clip Leads
16089A
None
2 large clips. 5 Hz – 100 kHz. Choose mandatory option
16089A-800 or C20. Operation and Service Manual is
furnished.
16089A-800
None
Cable length: 1 m (standard)
16089A-C20
None
Cable length: 2 m
16089B
None
2 medium clips. 5 Hz – 100 kHz. Choose mandatory option
16089B-800 or C20. Operation and Service Manual is
furnished.
16089B-800
None
Cable length: 1 m (standard)
16089B-C20
None
Cable length: 2 m
Test Fixture
Test Fixture
Test Fixture
Kelvin Clip Leads
Additional Information
4
Available Accessories – General/Miscellaneous Measurement Accessories – continued
Description
Model Number
Requires
(Instrument
must already
include the
following)
Kelvin IC Clip Leads
16089C
None
2 IC clips; cable length 1 m. 5 Hz – 100 kHz. Operation and
Service Manual is furnished.
Alligator Clip Leads
16089D
None
4 medium clips; cable length 1 m. 5 Hz – 100 kHz.
Operation and Service Manual is furnished.
Kelvin Clip Leads
16089E
None
2 large clips; cable length 1 m. 5 Hz – 100 kHz. Operation
Note is furnished.
External Voltage Bias
Fixture
16065A
None
± 200 V dc max., for axial or radial lead device.
50 Hz – 2 MHz. Shorting plate and Operation and Service
Manual are furnished.
Dielectric Test Fixture
16451B
None
Test fixture for measuring permittivity of dry solid sheet
material; Cable length 1 m. DC – 30 MHz. 38 mm and 5 mm
diameter electrodes for measuring bare material and two
types of electrodes for measuring material with
pre-formed electrodes are furnished.
16451B-ABA
None
U.S. - English localization
16451B-ABJ
None
Japan – Japanese localization
Liquid Test Fixture
16452A
None
(16048G and
four of 12500216 BNC(m)
to BNC(m)
adapters)
Test fixture for measuring permittivity of liquid material.
20 Hz – 30 MHz. Required volume of material; 3.4, 3.8, 4.8
or 6.8 ml. Temperature range: –20 ° to +125 °C. Shorting
plate, spacers, SMA-BNC adapters, fixture stand, carrying
case and Operation and Service Manual are furnished.
Test Leads
16452-61601
None
Heat-proof test leads for use with the 16452A.
Temperature range: –20 ° to +125 °C
3-Terminal SMD Test
Fixture
16043-60011
None
Equivalent to previous 16043A. DC – 110 MHz. For related
options and accessories, see Note below this table.
3-Terminal SMD Test
Fixture
16043-60012
None
Equivalent to previous 16043B. DC – 110 MHz. For related
options and accessories, see Note below this table.
Balanced/
Unbalanced 4Terminal Converter
16314-60011
None
Equivalent to previous 16314A; Unbalanced 50 Ω to
balanced 50 Ω converter for measuring balanced device or
circuit. 100 Hz – 10 MHz. Shorting bar and 50 Ω resistor
for Short/Load compensation and Operation and Service
Manual are furnished.
100 Ω Resistor
04294-61001
None
100 Ω load resistor module for 4-terminal pair extension.
Furnished with the 4294A.
Sample Program Disk
04294-18040
None
Contains sample programs in 3.5 inch disk. Furnished
with 4294A-ABA/ABJ.
BNC Adapter
1250-1859
4294A-1D5
BNC adapter for 4294A-1D5
Additional Information
Note: For more detailed information, refer to Accessories Selection Guide for Impedance Measurements.
5
Available Accessories – for Calibration and Maintenance
Description
Model Number
Requires
(Instrument
must already
include the
following)
Open Termination
42090A
None
4-terminal pair Open termination. Required for
performing calibration.
Short Termination
42091A
None
4-terminal pair Short termination. Required for
performing calibration.
4-Terminal Pair Standard
Capacitor Set
16380A
None
1 pF, 10 pF, 100 pF and 1000 pF standard capacitor set
with carrying case. Calibration report and Operation
Note are furnished.
4-Terminal Pair Standard
Capacitor Set
16380C
None
0.01 μF, 0.1 μF and 1 μF standard capacitor set with
carrying case. Calibration report and Operation Note
are furnished.
16380C-001
None
Adds 10 μF standard capacitor.
4-Terminal Pair Standard
Resistor Set
42030A
None
9 standard resistors from 1 mΩ to 100 kΩ in decade
steps; Carrying case, calibration report and Operation
and Service Manual are furnished.
Performance Test Kit
16190A
None
Contains 7 mm Open, Short, 50 Ω Load terminations,
calibrated air-line, wrench, calibration data diskette,
carrying case and Operation Note.
4 Terminal Pair to BNC
Interface Box
04294-61002
None
Terminal Adapter for test signal and DC bias
performance tests
Additional Information
Note: For more detailed information, refer to Accessories Selection Guide for Impedance Measurements
6
Literature Resource
Title
Publication Number
4294A Data Sheet
5968-3809E
4294A Brochure
5968-3808E
LCR Meters, Impedance Analyzers and
Test Fixtures Selection Guide
5952-1430E
Accessories Selection Guide For
Impedance Measurements
5965-4792E
Impedance Measurement Handbook
5950-3000
Additional Information
Note: More literature is available on the Agilent home website.
Web Resource
Have access to the following website to acquire the latest news, product and support information, application literature and more.
www.agilent.com/find/impedance
7
www.agilent.com
Remove all doubt
www.agilent.com/find/emailupdates
Get the latest information on the
products and applications you select.
Our repair and calibration services
will get your equipment back to you,
performing like new, when promised. You will get full value out of
your Agilent equipment throughout its lifetime. Your equipment
will be serviced by Agilent-trained
technicians using the latest factory
calibration procedures, automated
repair diagnostics and genuine parts.
You will always have the utmost
confidence in your measurements.
For information regarding self maintenance of this product, please
contact your Agilent office.
Agilent offers a wide range of additional expert test and measurement services for your equipment,
including initial start-up assistance,
onsite education and training, as
well as design, system integration,
and project management.
For more information on repair and
calibration services, go to:
www.agilent.com/find/removealldoubt
Product specifications and descriptions
in this document subject to change
without notice.
For more information on Agilent Technologies’ products, applications or services,
please contact your local Agilent office.
The complete list is available at:
www.agilent.com/find/contactus
Americas
Canada
Latin America
United States
(877) 894-4414
305 269 7500
(800) 829-4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Thailand
1 800 629 485
800 810 0189
800 938 693
1 800 112 929
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
1 800 226 008
Europe & Middle East
Austria
01 36027 71571
Belgium
32 (0) 2 404 93 40
Denmark
45 70 13 15 15
Finland
358 (0) 10 855 2100
France
0825 010 700*
*0.125 €/minute
Germany
07031 464 6333
Ireland
1890 924 204
Israel
972-3-9288-504/544
Italy
39 02 92 60 8484
Netherlands
31 (0) 20 547 2111
Spain
34 (91) 631 3300
Sweden
0200-88 22 55
Switzerland
0800 80 53 53
United Kingdom 44 (0) 118 9276201
Other European Countries:
www.agilent.com/find/contactus
Revised: October 6, 2008
© Agilent Technologies, Inc. 2009
Printed in USA, April 10, 2009
5989-8318EN