Mitsubishi Electric PLFY-P-VAM-E Specifications

MITSUBISHI ELECTRIC MULTIPLE SPLIT TYPE AIR CONDITIONERS
Series
AIR CONDITIONING SYSTEMS
The Air Conditioning & Refrigeration Systems Works acquired ISO 9001 certification under Series
9000 of the International Standard Organization (ISO) based on a review of Quality management for
the production of refrigeration and air conditioning equipment.
ISO Authorization System
The ISO 9000 series is a plant authorization system relating to quality management as stipulated by
the ISO. ISO 9001 certifies quality management based on the "design, development, production,
installation and auxiliary services" for products built at an authorized plant.
FM33568 / ISO 9001;2000
The Air Conditioning & Refrigeration Systems Works acquired environmental management system
standard ISO 14001 certification.
The ISO 14000 series is a set of standards applying to environmental protection set by the
International Standard Organization (ISO).
Certificate Number EC97J1227
http://Global.MitsubishiElectric.com/
HEAD OFFICE: MITSUBISHI DENKI BLDG., 2-2-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
http://Global.MitsubishiElectric.com
MEE05K440
New publication effective Oct 2006
Specifications subject to change without notice
Our Latest Technologies
V RF system
VRF stands for Variable Refrigerant Flow.
A VRF air conditioning system modulates the
flow of refrigerant depending upon the capacity
requirements of the building. A VRF system
comprises of condensing unit sited externally
and a series of multiple heating to the
occupied space.
I
Air conditioning is an ideal way of
controlling the temperature, movement
and cleanliness of air inside any
building, large or small. With today's
buildings being so well insulated and
Unsurpassed air conditioning
from Mitsubishi Electric
increasingly full of electronic equipment,
the need for effective climate control is
Known the world over, the name
greater than ever. Not only does it cool
Mitsubishi is a trusted household name
in the summer months, but air conditioning
can also heat, doing away with the
need for separate heating systems
altogether. More and more people today
associated with a variety of products
and services. Founded in 1907, the
company known today as Mitsubishi
are enjoying the benefits of comfortable
Electric, quickly rose to the forefront of
working and living environments made
the air conditioning industry - a position
possible with air conditioning.
we still enjoy today. We pride ourselves
nverter driven technology
At Mitsubishi Electric we strive to continually
meet the increasing demands of our customers,
being the first in the industry to offer highly
advanced ‘inverter driven’ systems. Using
inverter technology our systems produce just
the right amount of output to match the exact
requirement of any building. These systems
work so efficiently that they don’t waste
valuable energy by over-heating or overcooling, resulting in greatly reduced running
costs. Alternative systems that may appear
cheaper, can often cost substantially more to
run, making us the most cost effective choice
all round.
I
ntelligent Power Module (IPM)
technology
The City Multi range from Mitsubishi Electric
provides precise control of energy input,
through utilization of Intelligent Power Module
(IPM) technology. Employing this technology it
is possible to closely match the building
requirements, achieving more accurate control
of the occupied space. By using incremental
1Hz steps of capacity control, the amount of
power input required is significantly reduced,
resulting in greatly improved COP’s.
R 410A refrigerant
As scientific evidence points to man-made
chemicals for the damage caused to the ozone
layer, we only use chlorine-free refrigerants
that are safe and have ‘zero ozone depletion
potential’. Accordingly, as our systems require
less energy to run, they have a significantly
lower indirect global warming potential too. In
short, our constant investment and product
development possible, whilst protecting the
environment at the same time.
on offering some of the most energy
efficient systems available on the
market.
Page 1
Page 2
V RF system
Our answer to VRF
Mitsubishi Electric sets the boundaries of VRF technology with the City Multi range, which is available using
R410A refrigerant with zero ODP (Ozone Depletion Potential). The range has been specifically designed for
today’s building requirements and addresses key market issues such as energy efficiency, adaptability and
reliability. With user friendly control systems utilizing Internet technology and integrated cooling and ventilation
indoor units, City Multi is the benchmark and market leader in VRF technology.
VRF is a multi and direct expansion type air conditioning system that one outdoor unit can be connected with
multiples of indoor units. The amount of refrigerant can be changed freely according to the load in the indoor unit
because inverter compressor is used in the outdoor unit. Zoning in a small office is easily made possible with
indoor unit whose minimum capacity is very small. Energy conservation is easily handled because individual
indoor unit can stop and start its operation as needed. Indoor unit has a lot of models in order to suit various
interior design needs. Appliance to control separating heat of cooling in evaporation from heat in condensation is
becoming important in air conditioning in the building.
Inverter driven compressor
Outdoor unit
Sophisticated
yet simple technology
Joint
Header
Reliable
Indoor unit
OFF
ON 27˚c
ON 25˚c
ON 25˚c
ON 26˚c
OFF
Designed and manufactured to the highest standards, the
City Multi range offers one of the most reliable air
conditioning systems available. Simple to install and easy to
maintain, this range provides ideal solutions you can trust to
protect your investment.
PEFY-VMS
ON 23˚c
PEFY-VMR
Controller
>All the City Multi outdoor units are made in Japan under stringent control.
Page 3
Page 4
I
nverter Driven Compressor
Technology - now up to 50HP
Low
Starting
Currents
Using inverter driven technology
saves energy for several reasons:
The compressor varies its speed to match the indoor cooling and/or heating demand and therefore only consumes
the energy that is required.
When an inverter driven system is operating at partial load, the energy
efficiency of the system is significantly higher than that of a
standard fixed speed, non inverter system.
The fixed speed system can only operate at 100%, and
partial load conditions prevail for the majority of the time.
Therefore fixed speed systems cannot match the annual
efficiencies of inverter driven systems.
Heating / Cooling Capacity
100%
Heat Interchange Circuit
The unique Heat Interchange Circuit (HIC) enhances efficiency by providing additional sub-cooling and allows the
expansion device to control more effectively the refrigerant distribution, thereby increasing the operating efficiency
and reducing the volume of refrigerant in each system.
Linear Capacity
Control
City Multi Refrigerant Circuit
15Hz
Cooling:97Hz
Heating:102Hz
Condenser
High temperature
Compressor
Compressor
Compressor Frequency
Accumulator
Supercooled
heat exchanger
Low temperature
Electric expansion valve
Bypass
Evaporator
Accumulator
Medium temperature
>All the City Multi compressors are inverter-driven type (4~50HP).
Page 5
Common Refrigerant Circuit
Condenser
15%
Heat exchanger
Using proven single inverter driven compressor
technology, the City Multi range is favoured by the
industry for low starting currents (only 15 amps for a
16HP THM-A outdoor unit), a smooth transition across
the range of compressor frequencies and for
eliminating systems.
Unbeatable Efficiency
Electric expansion
valve
Expansion
valve
Evaporator
Page 6
I ntelligent Power Module (IPM)
Technology
The THM-A range from Mitsubishi Electric provides precise control of energy input, through utilization of Intelligent
Power Module (IPM) technology. Employing this technology it is possible to closely match the building
requirements, achieving more accurate control of the occupied space. By using incremental 1Hz steps of capacity
control, the amount of power input required is significantly reduced, resulting in greatly improved COP’s.
In addition, IPM technology ensures effective performance under part load conditions, a condition that most
systems will be in for the majority of the normal working life cycle. By taking account the efficiency at both part
load, and peak load conditions, R410A City Multi is designed to provide unbeatable year round/seasonal efficiency.
The difference between THM-A and previous
Mitsubishi Electric models
Technology is key when increased efficiency is demanded.
The City Multi THM-A range is able to deliver this in simple ways.
Total Energy Conservation
A highly efficient R410A scroll compressor design results in less friction losses at the motor. A simplified refrigerant
circuit (low pressure loss) including new accumulator design also adds a few more points to the efficiency scale.
Enhancements to the heat interchange circuit, an inverter driven fan motor and a heat exchanger design again add
vital increases to overall system efficiency and COP’s.
Comparison of COP (energy efficiency) – 10HP system
The importance of COP
COP stands for “Co-efficient of performance”. It is a measure of the useful energy a system can deliver compared
to the energy it consumes. It is calculated by dividing the energy output by the energy input of a system. The
higher the figure then the more efficient the system is deemed to be, with commensurate reduced running costs.
Mitsubishi Electric VRF models, the world's highest energy-efficient ACs, will undoubtedly reduce millions of tons
of CO2 emissions.
COP
5.0
Industry
Leader
4.5
4.0
3.5
23%
3.68
3.0
2.5
2.85
2.0
0
As of September, 2006 (based on internal survey)
Energy Saving
Industry leading high COP
(Coefficient of Performance) is
realized
R22
Our equivalent product
8 years before
Page 7
Page 8
E fficient R410A refrigerant
History of refrigerant
R22, an HCFC-based refrigerant, has been a popular choice for most chillers. R22 has been targeted by the
Montreal Protocol to be phased out in new equipment. Additionally, the European Union and other countries
governments are enforcing a ban of HCFC-based refrigerants for new installations.
Because of these restrictions, R410A refrigerants is increasingly available. R410A is a blend of HFCs, which do not
deplete the ozone but may contribute to global warming.
Technical aspects of refrigerant
R410A is a more efficient refrigerant as it has a higher specific heat capacity when compared to R407C or R22.
This higher energy carrying capacity allows for smaller pipe sizes, longer pipe runs and reduces the volume of
refrigerant within a system. This is a major factor when complying with EN378, a European standard concerning
safety and environmental requirements in the design, manufacture, installation, operation, maintenance and
disposal or refrigerating systems.
For the Environment
Enhancing environmental care(measures for the RoHS Directive and the refrigerant reduction)
Every unit is in compliance with the RoHS Directive,* which stands for the restriction of hazardous substances:
Lead-free soldering is used to avoid Lead Groundwater Contamination on the print board. The amount of
refrigerant on the unit has also been reduced to enhance environmental care.
* RoHS Directive: the restriction of the use of certain hazardous substances in electrical and electronic equipment that has been sold in EU since July 2006
Page 9
Page 10
T he City Multi range
Solutions for more demanding applications
The City Multi range is Mitsubishi Electric’s answer to large scale VRF (Variable Refrigerant Flow) applications.
The efficiency of City Multi (in particular the new R410A THM-A Series models) is second to none and offers a
substantial increase in energy efficiency and corresponding EER/COP ratings.
The City Multi Y Series range offers a simple and
flexible solution where there is a demand for
a changeover capability between heating
and cooling, ensuring a constant,
comfortable indoor climate.
It also provides a modular approach to air conditioning requirements – providing an
ideal solution for new build,
refurbishment
projects
and phased installations.
With a wide range of 60
indoor units and 13 outdoor units, that include
single phase 4, 5 and
6HP models, the choice
is impressive.
Outdoor
Units
Indoor
Units
A Comprehensive
City Multi Range
Product Range – Outdoor Units
cooling / heating
4HP
5HP
6HP
10HP
12HP
14HP
8HP
HEAT PUMP PUMY-P100VHM PUMY-P125VHM PUMY-P140VHM PUHY-P200THM-A PUHY-P250THM-A PUHY-P300THM-A PUHY-P350THM-A
3.35/3.42 3.24/3.69 2.90/3.23 3.90/4.13 3.41/3.95 3.68/3.98 3.07/3.71
COP
16HP
18HP
20HP
22HP
24HP
26HP
28HP
HEAT PUMP PUHY-P400THM-A PUHY-P450THM-A PUHY-P500TSHM-A PUHY-P550TSHM-A PUHY-P600TSHM-A PUHY-P650TSHM-A PUHY-P700TSHM-A
3.39/4.04 3.06/3.84 3.16/3.67 3.49/3.73 3.15/3.75 3.25/3.81 3.06/3.70
COP
30HP
32HP
34HP
36HP
38HP
40HP
42HP
HEAT PUMP PUHY-P750TSHM-A PUHY-P800TSHM-A PUHY-P850TSHM-A PUHY-P900TSHM-A PUHY-P950TSHM-A PUHY-P1000TSHM-A PUHY-P1050TSHM-A
COP
3.16/3.83 3.03/3.79 3.17/4.01 3.02/3.94 3.50/4.03 3.47/4.00 3.26/3.89
44HP
46HP
48HP
50HP
HEAT PUMP PUHY-P1100TSHM-A PUHY-P1150TSHM-A PUHY-P1200TSHM-A PUHY-P1250TSHM-A
COP
3.10/3.85 3.00/3.78 3.07/3.84 2.97/3.87
Page 11
Page 12
D ue to the compact design of outdoor unit,
industry leading space saving is realized.
Therefore, the new outdoor unit can be
installed more freely than the conventional
model.
The downsized outdoor unit can be transported
through a 800mm wide door.
8-14HP outdoor units
Example of 6-people lift.
mm (in.)
mm (in.)
Width
920
(36-7/32)
60
11
(14/32")
(14/32)
Height
1650
(64-31/32)
Depth
760
(29-29/32)
10
(13/32)
10
(13/32)
850 (33-15/32)
1400 (55-1/8)
Compact Design
of New Outdoor Unit
800 (31-1/2)
Industry leading weight saving is realized.
As of September, 2006 (based on internal survey)
The unit can easily be transported even into slender buildings.
Easy to
transport
The manageability of the outdoor unit has been
improved due to drastic reduction in unit weight,
leading to easy transportation, installation, and
reduction in withstand load.
10HP outdoor unit
Approx. 45kg
reduction in weight
City Multi
makes it easy.
Approx. 230kg
Weight(kg)
The narrow space between buildings
makes it difficult to use a crane.
Weight(kg)
Page 13
Industry
Leader
Approx. 185kg
8HP
10HP
12HP
14HP
16HP
18HP
20HP
22HP
24HP
26HP
28HP
185
185
210
210
240
240
370
395
395
420
420
30HP
32HP
34HP
36HP
38HP
40HP
42HP
44HP
46HP
48HP
50HP
450
450
480
480
635
635
660
660
660
690
690
Page 14
F eatures and Benefits
New
Improved
Figures
Low Noise Levels
New Fan Design
City Multi VRF systems led the introduction of larger single fan rotors some ten years ago, achieving substantially
lower noise levels over multiple designs. Continuing the development in the areas of blade shape and weight,
Mitsubishi Electric have managed to achieve even higher performance and lower noise levels. To reduce noise
levels further and comply with inner city residential noise regulations, all outdoor units include Night Set-back
mode. This function works by lowering the fan speed and compressor frequency proportionally with reduction in
demand.
New inverter driven
outdoor fan motor
The compressor compartment is
sealed by metal panels to attain
a low noise level in all directions.
Low
Noise
The Strength of City Multi
Increased Pipe Lengths
Low
Noise
Total system pipe lengths of up to 300m(984ft) and furthest pipe lengths of 150m(492ft) make the City Multi Y
series system one of the most flexible VRF systems in the market
Newly designed refrigerant
circuit (low pressure loss)
Y Series
Outdoor unit
Highly efficient R410A
Scroll compressor
Top-bottom differential
50m[164ft]
Indoor unit
Furthest piping length
175m[574ft] (equivalent length)
(actual length 150m[492ft])
between indoor units
top-bottom differential
15m[49ft]
R410A
R22
Y Series
Total Pipe Length
300(984)
240(787)
Furthest Piping Length
150(492)
120(393)
m(ft)
Page 15
Page 16
Effective Use of Space
mm (in.)
The new models have a smaller foot print and service
space requirement than the R22 models.
300
(11-26/32)
760
(29-29/32)
1510
(59-14/32)
300
(11-26/32)
760
(29-29/32)
1510
(59-14/32)
450
(17-23/32)
450
(17-23/32)
920 (36-7/32)
1220 (48-1/32)
8-14HP systems
1.21m2
16/18HP systems
1.84m2
18HP
mm (in.)
Conventional CITY MULTI
100
(3-30/32)
300
(11-26/32)
840
(33-1/18)
760
(29-29/32)
1510
(59-14/32)
450
(17-23/32)
450
(17-23/32)
1990 (117-23/32)
50%
reduction
1220 (48-1/32)
2.77m2
1.84m2
Heating Operation Range
At low ambient temperature the guaranteed operating range in heating is now lowered to
Operating range in cooling is from an outdoor
temperature of -5˚C[23˚F], while that in heating has
expanded to an outdoor temperature of -20˚C[-4˚F]
In heating mode
-20˚C
[-4˚F]
Outdoor temperature
(wet bulb temperature)
-20˚C[68˚F]
15.5˚C
[60˚F]
The Strength
of New City Multi
R410A Pipe Sizing
mm(in.)
Conventional
In cooling mode
Outdoor temperature
(dry bulb temperature)
-5˚C
[-23˚F]
-20˚C[-4˚F] -10˚C[14˚F]
0˚C[32˚F]
10˚C[50˚F]
20˚C[68˚F]
43˚C
[109˚F]
30˚C[86˚F] 40˚C[104˚F]
Blue Fin Treatment
As R410A has a higher specific heat capacity than R22,
the pipework is smaller. This means the pipe itself is
cheaper, easier to install and therefore less riser space is
required within the building.
Gas
piping
Liquid
piping
Gas
piping
Liquid
piping
φ28.58
φ12.7
φ22.2
φ9.52
(φ1-1/8)
(φ1/2)
(φ7/8)
(φ3/8)
Based on 10HP model
The anti-corrosion Blue Fin treatment of the heat exchanger is especially
effective in urban environments where the build up of traffic pollutions can
damage the aluminum fins reducing the capacity and life expectancy of the
unit. All City Multi R410A outdoor units have been treated in this fashion.
Page 17
Page 18
The importance of control
The need for control is paramount in
order to optimise the performance of
any air conditioning system and
minimise its running costs. Mitsubishi
Electric offer a wide range of control
options designedto do just this.
Operating an air conditioning system without
the right control can prove costly. It's therefore
important to ensure that every system is
correctly specified to the degree of control it
requires. Mitsubishi Electric have a wide range
of controls available 'off-the-shelf' and where
needed, individual control systems can be
specifically designed to suit.
R emote Controller
Individual Remote Controller
Good controls will benefit any application,
largeor small. Air conditioning products need
toreact to a variety of factors: different room
sizes, usage and staff levels; changes in the
climate; electronic equipment and lighting ...the
list goes on. So whatever the application,
optimum control of air conditioning systems is
essential and will result in a constant,
comfortable environment, which inturn is both
energy and cost efficient.
A degree of difference
When an air conditioning system is not
properly controlled,it will not run as efficiently
as it should. For every degree that the system
deviates from the required temperature,energy
costs can rise by up to 5%. Specify one of the
many control options from Mitsubishi Electric
to ensure air conditioning works as intended,
whilst giving the optimum amount of control.
The simpler, the better
With the array of comprehensive control
systems available from Mitsubishi Electric,it
becomes simple to design and install air
conditioning systems. From a simple hand
heldcontroller to a G50 system - you are in
control.
Centralized Remote Controller
Remote Controller
Page 19
Page 20
Integrated Communications Control
with Mitsubishi's Unique Transmission Network (M-NET)
System Controller
Local remote controller
MITSUBISHI ELECTRIC's Air-conditionaer Network System (MELANS) leads air conditioner management a PC
browser and Network era.
Model
PAR-21MAA PAR-F27MEA PAC-SE/YT51CRA
No. of units controllable
(Groups (G) / units)
MELANS
Simple
Remote
Controller
Wireless
Remote
Controller
System
Remote
Schedule
Controller Timer
ON/OFF
Remote
Controller
PAR-21MAA
PAC-SF44SRA
PAC-YT34STA
PAC-YT40ANRA
Permit / Prohibit direction
✕
✕
✕
PAC-SC30GRA
GB-50A
Operating hour
✕
✕
Recording
Others
Ethernet
Monitoring
MITSUBISHI ELECTRIC's CITYMULTI can
be easily connected to the building
management system through BACnetTM.
Integrated centralized
control software TG-2000A
GB-50A
*4
✕
*4
✕
browser
*4
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
Times of stops / Starts per day
Times of stops / Starts per week
✕
✕
✕
✕
*5
✕
*5
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
16
✕
✕/48 *5
3/3
12
✕
12
12
✕/336*5
21/21
84
✕
84
84
✕
✕
✕
✕
✕
✕
1
1
✕
1/1
✕
56
*5
✕
*5
✕
✕
8
✕
✕
One day
*5
1/1
✕
✕/
✕
✕
✕
✕
✕
✕
112
✕
✕
✕
✕
✕
✕
✕
✕
10
✕
5
✕
✕/30 *
10
1
✕
✕
5
Minimum setting unit (minutes)
1
Error history
✕
✕
✕
✕
Daily / Monthly reports
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
Electricity charges
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
Set temperature range limit
✕
✕
✕
✕
✕
✕
Auto lock
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕/
10
✕/
*1
Group setting
✕
✕
/✕
Block setting
✕
✕
✕
✕
✕
✕
✕
Revision of electricity charges
✕
✕
✕
✕
✕
✕
✕
/
/
/
Ventilation
Ventilation
(group / interlocked) (group / interlocked)
This is a specialized air conditioning management system, in
which up to 2000 indoor units
can be centrally controlled.
Control and
management
A ir-Conditioning
Control System
BACnetTM transmission line
browser
✕
✕
Set temperature
Ventilation (group / interlocked)
transmission line
2000G/
2000units
GB-50A
✕
✕
Auto off timer
Operation
LON W
TG-2000A
✕
✕
Operation mode
Air flow direction
Scheduling
PEFY-VMH
PCFY-VGM
PKFY-VAM / VGM / VFM
PFFY-VLEM
PFFY-VLRM
Fresh Air Intake type
Interface
ORKSTM
8G/16units
GB-50A
50G/50units
✕
Filter sign
Annual (Designated day setting)
BACnetTM interface software
PAC-YG31CDA
16/50
GB-50A
50G/50units
Error content
Group
Remote
Controller
Weekly
LMAP02
Centralized controller
Permit / Prohibit
G-50A
PLFY-VAM
PLFY-VLMD
PMFY-VBM
PEFY-VMR
PEFY-VMS
PDFY-VM
PEFY-VML
50G/50U
✕
✕
Fan speed
Y :PUHY
Group
remote
controller
Error flashing
PAR-F27MEA
INDOOR UNIT
ON/OFF
remote
controller
ON/OFF
PAR-FL32MA PAR-FA32MA
OUTDOOR UNIT
50/50
Temperature setting
Indoor temperature (intake)
PAC-SE51CRA
PAC-YT51CRA
Schedule
timer
PAC-SF44SRA PAC-YT34STA PAC-YT40ANRA PAC-SC30GRA
Fan speed
Monitoring
M-NET
Remote
Controller
System
remote
controller
✕
Operation mode
C entralized Remote Controller
ndividual Remote Controller
All of the local remote controllers feature liquid
crystal and LED displays and easy to operate.
PAR-FL32MA
PAR-FA32MA
1G/16units 1G/16units 1G/16units 1G/16units
Air flow direction
I
System controller
Wireless
remote
controller
Start / Stop
Operation
MALANS has a large line-up, including local remote controllers, timers, grouping controllers, central controllers,
and centralized integrated software, PLC and its software, as well as BMS interface hardware and software etc.
The combination of the MELANS products can fulfill the requirements of small-scaled control system, middlescaled control system up to 2000 indoor units, and/or large-scaled opening system affiliated to a BMS system.
Moreover, with central controller G-50A/GB-50A, PC browser and long distance remote control (monitoring and
operating) via net-work is possible and easy.
Simple
remote
controller
Remote controller
✕/
*2
✕
/
*2
✕
✕
✕
/
*2
✕
*2
*2
✕
*2
✕
✕
✕
✕
✕
✕
✕
/
/
/
*3
✕
✕
*2
*2
/
/
/
Fan speed
✕
/
✕
✕
/
/
/
✕
/
/
Ventilation mode
✕
/✕
✕
✕
/✕
/✕
/✕
✕
/✕
/✕
Status
✕
/
✕
✕
/
/
/
/
/
Fan speed
✕
/
✕
✕
/
/
/
✕
/
/
Ventilation mode
✕
/✕
✕
✕
/✕
/✕
/✕
✕
/✕
/✕
Start / Stop
: Each group / Batched
: Batched only
: Each group
✕ : Not available
: Block (City Multi indoor unit only)
– : Not used
/
: Batched handling (for maintenance)
: G-50A license registration possible.
*2: Installation possible at Initial setting tool.
*1: For group operation, cross-over wring is required between indoor unit.
*3: Interlock setting from local remote controller.
*4: From schedule setting
*5: When PAC-YT32PTA is connected.
Remote Controller
Page 21
Remote Controller
Page 22
Control Systems
Individual Control Systems
Wired MA remote controller PAR-21MAA
Example of system configuration
M-NET
Non-polarized
2-wire
Non-polarized
2-wire
MA remote controller
MA remote controller
• Dot matrix liquid crystal screen displays complete operating
status.
• Digital display lets you set temperature in 1˚C/˚F increments.
• Weekly Timer: up to 8 ON/OFF/Temperature Settings can be
made per day. The time can be set in 1-minute increments.
• Equipped with a thermostat sensor in the remote controller
that makes possible more comfortable room temperature control.
• Enables you to select cool/heat/fan operation mode with the
indoor remote controller of your choice without using the
cool/heat selector.
• Ability to limit the set temperature (upper and lower temperature can be set.)
• Ability to restrict setting changes (either all changes or all except ON/OFF)
• Constantly monitors for malfunctions in the system, and is
equipped with a “self-diagnosis function” that lets you know by
error code immediately when a malfunction occurs.
• Dimensions: 100 x 120 x19 mm
Various control systems can be offered with indoor unit remote controller.
New display-Larger,easier-to-see characters
Various information is displayed and conveyed clearly, enabling more accurate operation of the air conditioner.
Dot Liquid Crystal Display (LCD)
The dot liquid crystal display enables quick understanding of the operation state.
● Display example [Operation mode]
Dot liquid crystal display
TIME SUN
˚F
˚F
TEMP.
Multi-language Display
In addition to English, contents can be displayed in seven other languages.
This function makes the remote controller very useful in facilities where foreigners are present.
WEEKLY
SIMPLE
AUTO OFF
ON/OFF
● Display example [Cool mode]
[English]
[German]
[Spanish]
[Russian]
[Itarian]
[Chinese]
[French]
[Japanese]
Group control
A remote controller can control up to 16
indoor units at the same time.
(Automatic address setting)
Multi Language Display Example
Outdoor unit
Cooling/Heating
mode switch control
Cooling/Heating mode of
the outdoor unit can be
switched with the remote
controller for indoor unit.
Remote
controller
Remote
controller
Remote
controller
Remote
controller
Lossnay
Two-remote-controller
control
By connecting with two remote controllers, an outdoor
unit can be controlled freely
either from the one in the
room or from the one in the
control room. (Last setting
override)
Group control is possible by
using two remote controllers.
Remote Controller
Page 23
Remote
controller
Remote
controller
Remote
controller
Remote control
Remote controller wiring can be extended
up to 200m, which makes it possible for the
indoor unit remote controllers to be installed at one place without being separated.
Remote
controller
Interlocking control
Total enthalpy heat exchanger (Lossnay)
can be operated and controlled with indoor unit remote controller. Cleaning time
for an air wash unit is displayed on the
controller when the unit is connected.
Remote Controller
Page 24
Control Systems
Individual Control Systems
Wired ME remote controller PAR-F27MEA
Wireless remote controller PAR-FL32MA / PAR-FA32MA
• No need to configure addresses for group operation.
• Lit LED keeps you informed of operation - blinking even
gives you the error code via the number of blinks.
• Can be used with the MA remote controller.
*When used in group configurations, wiring between indoor
units is required.
*Combining ME remote controller and/or LOSSNAY remotecontroller in a group is not possible.
• Optional LCD temperature setting and display in 1˚C /1˚F
unit.
• Dimensions:153 x 57 x 18 mm
• This remote control requires that wiring is connected to
only one outdoor unit.
• Group operation with multiple outdoor units is possible.
Grouping can be changed freely, which makes dividing
rooms for tenant easier.
• Daily timer
Repeated ON / OFF timer every day.
• Auto OFF timer
0:30, 1:00, 1:30, 2:00...4:00 one touch timer.
• Function lock
All functions or all functions except ON / OFF can be selected.
• Limit setting of room temperature.
• Dimensions:130 x 120 x 19 mm
Example of system configuration
PAR-FL32MA
PAR-FA32MA
Example of system configuration
ME R/C
ME R/C
Simple remote controller PAC-SE51CRA(M-NET) / PAC-YT51CRA(MA)
• Control: START/STOP, room temperature and fan speed
• The only wiring required is cross-over wiring based on
two-wire signal lines.
• Room temperature sensors are built-in.
• LCD temperature setting and display in 1˚C /1˚F unit.
• Can operate all types of indoor units
*Since this system has no operation mode switching, test operation, self-diagnosis or interlock setting functions, it should
always be used in conjunction with the PAR-21MAA or other
centralized controller.
*Combining ME remote controller and/or LOSSNAY remote
controller in a group is not possible.
• Dimensions:120 x 70 x 41 mm
PAC-SE51CRA
Non-polarized
2-wire
Signal
receiving
unit
Wireless
remote
controller
Nonpolarized
2-wire
Signal
receiving
unit
Wireless
remote
controller
Nonpolarized
2-wire
Signal
receiving
unit
Wireless
remote
controller
Example of system configuration
Central controller
UP
Power supply unit
Simple
MA R/C
Remote Controller
Page 25
Simple
MA R/C
Remote Controller
Page 26
Centralized
Remote Controller
One system controller is available for use when you need to control up to fifty indoor units from one location. The
PAC-SF44SRA also has hardwired connection available (On/Off input, fire alarm input, run output, fault
output).
System remote controller PAC-SF44SRA
Mitsubishi Electric controllers are complimented by a weekly programmable timer, being able to control up
to fifty indoor units. The PAC-YT34STA also has hardwired connection available (On/Off input, fire alarm
input, run output, fault output).
Schedule timer PAC-YT34STA
System Controller
Programmable Timer
DESCRIPTION
FUNCTION
UNITS
Max No.Units
ON/OFF
EXTERNAL INPUT
Run and stop operation
Switches between Cool/Dry/Auto/Fan/Heat.
Operation Mode will vary depending on the
indoor unit. Auto mode is available with only
R2 and WR2 systems
Sets the groups temperature control.
Cool/Dry:19-30˚C
Heat:17-28˚C
Auto:19-28˚C
4 speed - Lo-Mi1-Mi2-Hi
2 speed - Lo-Hi
Air Flow angles:100˚-80˚-60˚-40˚ and auto swing
Run/Stop,Temperature Setting,Mode Selection
and Filter Reset functions can be prohibited
via a higher level system controller
Measures the intake temperature of the
master unit within the group
Displays a 4 digit code and the affected
unit address
Allows the group to be interlocked with a heat
recovery Lossnay unit
Hardwired connections available
EXTERNAL OUTPUT
Hardwired connections available
MODE SELECTION
TEMPERATURE SETTING
FAN SPEED SETTINGS
AIR FLOW DIRECTION
PERMIT/PROHIBIT FUNCTION
INDOOR RETURN AIR TEMPERATURE
ERROR INDICATION
VENTILATION INTERLOCK
DESCRIPTION
FUNCTION
PAC-SF44SRA
50 units/50 group
Operation Displays
PAC-YT34STA
UNITS
Max No.Units
ON/OFF
EXTERNAL INPUT
Run and stop operation
Switches between Cool/Dry/Auto/Fan/Heat.
Operation Mode will vary depending on the
indoor unit. Auto mode is available with only
R2 and WR2 systems
Sets the groups temperature control.
Cool/Dry:19-30˚C
Heat:17-28˚C
Auto:19-28˚C
Set the time
Displays a 4 digit code and the affected
unit address
Hardwired connections available
EXTERNAL OUTPUT
Hardwired connections available
MODE SELECTION
TEMPERATURE SETTING
CURRENT TIME
ERROR INDICATION
50 units/50 group
Operation Displays
On/Off
/Fire Alarm
On/Off
/Faults
• Dimensions:130 x 120 x 19 mm
On/Off
/Fire Alarm
On/Off
/Faults
• Dimensions:130 x 120 x 19 mm
System example
System example
System
remote
controller
UP
System
remote
controller
Power supply
unit
PAR-21MAA
UP
Power supply
unit
LOSSNAY
PAR-F27MEA
PAR-21MAA
Schedule timer
LOSSNAY
PZ-52SF
R / C : Remote Comtroller
Remote Controller
Page 27
LOSSNAY
LOSSNAY
PZ-52SF
PAR-21MAA
Simple
PAC-SE51CRA
R / C : Remote Comtroller
Remote Controller
Page 28
Centralized
Remote Controller
Just press a switch to start. All of the units can be started stopped by pressing the main switch, and each unit in
the group can be started stopped with individual switched.
ON/OFF remote controller PAC-YT40ANRA
Group remote controller PAC-SC30GRA
DESCRIPTION
FUNCTION
ON/OFF
OPERATION MODE SWITCHING
TEMPERATURE SETTING
FAN SPEED SETTING
AIR FLOW DIRECTION SETTING
MANUAL OPERATION
PROHIBIT/PERMIT
(ON/OFF, OPERATION MODE, SETTING
Up to 8 groups can be operated (maximum of 16 units/. Just by pressing RAC-SC30GRA switches, groups can
be started and stopped as a batch.
OPERATIONS DISPLAY
(COOLING PROHIBIT, HEATING PROHIBIT,
ERROR DISPLAY
SCHEDULE OPERATION
VENTILATION OPERATION
(INDEPENDENT)
VENTILATION OPERATION
(INTERLOCKED)
EXTERNAL OUTPUT
(ERROR OUTPUT,
OPERATION OUTPUT)
CONNECTION POSITION
Max No.Units
ON/OFF
Run and stop operation
Switches betweenCool/Dry/Auto/Fan/Heat.
Operation Mode will vary depending on the
indoor unit. Auto mode is available with only
R2 and WR2 systems
Sets the groups temperature
control.Cool/Dry:19-30˚C
Heat:17-28˚C
Auto:19-28˚C
4 speed - Lo-Mi1-Mi2-Hi
2 speed - Lo-Hi
Air Flow angles: 100°-80°-60°-40° and auto swing
Run/Stop,Temperature Setting,Mode Selection
and Filter Reset functions can be prohibited
via a higher level system controller
Measures the intake temperature of the
master unit within the group
Displays a 4 digit code and the affected
unit address
Allows the group to be interlocked with a heat
recovery Lossnay unit
MODESELECTION
Compatible only with external input.
TEMPERATURE SETTING
Not available
FAN SPEED SETTINGS
COOLING/HEATING PROHIBIT)
ROOM TEMPERATURE DISPLAY
Not available
LED flashes during failure.
(The error code can be confirmed by removing
the cover.)
Not available
Group operation of only LOSSNAY units possible.
*Only ON/OFF of group.
The LOSSNAY will run in interlock with the
operation of indoor unit.
*The fan rate and mode cannot be changed.
The LED will turn ON only during operation after interlocking.
"ON/OFF" and "error/normal" are output with the level signal.
*The optional output cable is required.
Indoor/outdoor transmission line: Connectable
Central system transmission line: Connectable
(Power supply unit (PAC-SC50KUA) is needed.)
PAC-SC30GRA
16 units/ 8 group
UNITS
OPERATIONS DISPLAY
TEMPERATURE, FILTER RESET)
SPECIFIC MODE
OPERATION PROHIBIT
DESCRIPTION
FUNCTION
Run and stop operation for the air conditioner units
Not available
Not available
Not available
Not available
AIR FLOW DIRECTION
PERMIT/PROHIBIT FUNCTION
INDOOR RETURN AIR TEMPERATURE
ERROR INDICATION
VENTILATION INTERLOCK
• Dimensions:130 x 120 x 19 mm
System example
Connect to the centralized transmission line
• Dimensions:130 x 120 x 19 mm
Group remote
controller
System example
UP
Power supply
unit
LOSSNAY
PAR-F27MEA
PAR-21MAA
PAR-21MAA
PAR-21MAA
PAR-21MAA
R/C:Remote Controller
PZ-52SF
ON/OFF
remote
controller
Connect to the indoor/outdoor transmission line
PAR-21MAA
PAC-YT51CRA
R/C:Remote Controller
Remote Controller
Page 29
Group remote
controller
Remote Controller
Page 30
Centralized
Remote Controller
Central controller G-50A/GB-50A
System Structure
Up to 50 units of packaged air conditioners can freely be monitored and operated!
Furthermore, it has enabled the Monitoring and Operation Via a Web Browser on a Personal Computer
connected to it using a LAN or telephone line!
First in the industry
With Web Server
Functions!
G-50A (with display)
GB-50A
• Simple and Flexible
This new generation controller is suitable for small to large
systems with simple to complex functions available.
• Web Browser
Enables monitoring and operation of air conditioning units using a PC with Microsoft® Internet Explorer.
• Remote Access
Allows users to remotely monitor and operate the air conditioning units using a PC connected to a telephone line.
• Auto Alarm
In the case of any malfunction, necessary information will be
sent to a mobile phone and/or personal computer by e-mail.
• Easy to Upgrade
Various new functions will be introduced gradually and can
easily be down loaded into any existing G-50A/GB-50A.
Remote monitoring via a
Web browser
Web browser
G-50A
Public telephone
line
M-NET
Router
UP
Ethernet
Provider
City Multi
POWER SUPPLY UNIT
MODEL
PAC-SC50KUA
POWER RATING
2.11kg
WEIGHT
SERIAL No.
MITSUBISHI ELECTRIC CORPORATION
Power supply unit
PAC-SC50KUA
GB-50A
M-NET
Provider
UP
Example: Energy Monitoring
Demand Control
Annual Schedule
City Multi
POWER SUPPLY UNIT
MODEL
PAC-SC50KUA
POWER RATING
WEIGHT
SERIAL No.
2.11kg
MITSUBISHI ELECTRIC CORPORATION
Power supply unit
PAC-SC50KUA
* Microsoft is a trademark or trademark of Microsoft corporation.
G50 Centralised Controller
Example of display icons (air conditioner icons)
Operation
Stop
Occurrence of
abnormality
Operation/
Occurrence of a filter sign
In timer operation
Lossnay on
Under energy-saving
control
FUNCTION
DESCRIPTION
MAX No.OFINDOOR UNITS
Up to 50 indoor units can be connected
ON/OFF
Run and Stop operation for a single group
MODE SELECTION
Switches between Cool/Dry/Auto/Fan/Heat.Operation Mode will vary depending on the indoor unit.
Auto modeis available with only R2 and WR2 systems
TEMPERATURE SETTING
Sets the groups temperature control.Cool/Dry:19-30˚C,Heat:17-28˚C,Auto:19-28˚C
FAN SPEED SETTING
4 speed:Lo-Mi1-Mi2-Hi,2 speed:Lo-Hi
AIR FLOW DIRECTION
Air Flow angles:100˚-80˚-60˚-40˚ and auto swing
TIMER OPERATION
Maximum of 3 time sequences with 3 Start/Stop times per day for all groups can be allocated
PERMIT/PROHIBIT FUNCTION
Individual prohibit operations for each remote controller function (Run/Stop, Temperature Setting,Mode Selection
and Filter Reset) can be activated
Displays the measured intake temperature from each group
INDOOR RETURN AIR
TEMPERATURE
ERROR INDICATION
Displays a 4 digit code and the affected unit address.An error log is held showing the last 64 date stamped alarms
TEST RUN FUNCTION
Allows each unit within the group to operate in test mode
VENTILATION INTERLOCK
Allows the group to be interlocked with a heat recovery Lossnay unit
WEB SETPOINTLIMIT
Reduce the setpoint band of each individual unit (exp.23˚C to 25˚C)
WEB AUTOCHANGEOVER
Automatically switch heat pump outdoor unit to cooling or heating mode depending on the requirements
WEB INITIALSETTING
Commission the G50 from the web pages
WEB LOGIN
Two types of login available (Administrator & Guest).Administrator able to allow specific function access to guest
EXTERNAL INPUT/OUTPUT
Hardwired connections are available for : Inputs:
Level Signal-Batch Start/Stop,Batch Emergency Stop
Pulse Signal-Batch Start/Stop,Enable/Disable Local R/C
Outputs: Start/Stop Status,Error/Normal Status
PAC-SC50KUA
POWER SUPPLY UNIT
G50 Software Options
Remote Controller
Page 31
G50 -Web Monitor
Control and Monitor the G50 via Internet Explorer 5 or 6
G50 - Saving Energy
Energy Saving Capability
G50 - Email
Enable E-mail activation on fault conditions
G50 - Peak Cut
Peak Cut Control
G50 - Schedule
Weekly / Annual Scheduling and Night Set Back
G50 - Personal Web
Virtual Remote Controllers
G50 - Change
Energy Charge
G50 - BacNet
Bacnet interface
Remote Controller
Page 32
Centralized
Remote Controller
Integrated centralized control software TG-2000A
Example of Basic System Configuration.
Main features of TG-2000A
Single-phase 208/230V
M-NET
Charge
license
1
2
3
Input
G-50A
12VDC
4
Single-phase 208/230V
Web
monitor
license
UP
POWER SUPPLY UNIT
MODEL
PAC-SC50KUA
POWER RATING
WEIGHT
SERIAL No.
2.11kg
MITSUBISHI ELECTRIC CORPORATION
Power supply unit
PAC-SC50KUA
Schedule
license
3-phase 208/230V
(3-wire)
Indoor unit system
watt-hour meter
Indoor unit
watt-hour meter
Outdoor unit system
watt-hour meter
5
RS-485
RS-232C
6
Converter
Uninterruptive
power supply (UPS)
Integrated
centralized control
software installation
Central controller
personal computer
TG-2000A
7
8
Up to 2000 indoor units (40 G-50A/GB-50A units) can be operated and monitored simultaneously.
The air-conditioner layout can be displayed on the screen, making control and operation easier.
The annual and weekly schedules can be set. Two schedules, such as the summer master and winter master, can be
saved in the weekly schedule.
Air-conditioning charges can be calculated based on the multiple air-conditioner usage results. The power apportionment
percentage data and apportioned power rate can be calculated for each indoor unit using the power apportionment
function, and can be output as a CSV format file. * Power apportionment charging is not possible with the old model, A
control or K control.
Charging without WHM
: The user manually inputs the power rate to calculate the air-conditioning
charges. (Using a tool)
RS-485 WHM charging
: The RS-485 WHM value is automatically tabulated to calculate the
air-conditioning charges.
PLC + pulse WHM charging : The pulse output WHM value is automatically tabulated by the PLC to calculate
the air-conditioning charges.
Energy saving operation is possible using the "ON/OFF", "set temperature change", "fan operation changeover" and
"performance save operation (60% to 90%)" functions.
Energy saving operation matching the amount of power in use is possible by using the PLC's electric amount count
software.
Night set-back operation is possible with schedule settings. *1*4
General equipment can be operated and monitored. *2
General equipment can be schedule-controlled when using PAC-YG21CDA with PLC.
For details of PLC refer to Installation Manual of PAC-YG21CDA. *3
*1: Compatible with TG-2000A Ver. 4.10 and higher, G-50A Ver. 2.51 and higher.
*2: Compatible with TG-2000A Ver. 4.30 and higher, G-50A Ver. 2.51 and higher.
*3: Compatible with TG-2000A Ver. 4.60 and higher, G-50A Ver. 2.70 and higher.
*4: With Night Set-Back function,the CITY MULTI system can run at heating mode with target temperature set
to 12˚C/54˚Funder schedule control. This function can protect the room from dropping down to extremely
low temperature at mid-night.
Compatible with TG-2000A Ver. 4.10 and higher
* The electric amount count software or separately
procured parts must be used with the designated PLC.
power source
Indoor unit system
watt-hour meter
Indoor unit
watt-hour meter
The TG-2000A can realize the following functions using
the G-50A/GB-50A option (license).
* Operation/monitor
* Annual/weekly schedule
* Charge
* Energy saving *1
* Peak cut *1
*1: Compatible with TG-2000A Ver. 4.10 and higher,
G-50A Ver. 2.51 or later.
Outdoor unit system
watt-hour meter
PLC (with electric amount count
software)
Uninterruptible
power supply (UPS)
Central control
personal computer
TG-2000A
Integrated centralized control
software installation
Remote Controller
Page 33
Remote Controller
Page 34
LONWORKS (LMAP02)
BACnet TM interface(PAC-YG31CDA)
TM
TM
CITY MULTI can easily combine into a Building Management System (BMS) via the LonWorksTM and M-NET adapter LMAP02.
LonWorksTM is an opened transmission protocol widely used at BMS, and related equipment control.
CITY MULTI is therefore compatible with large-scaled BMS management via LonWorksTM.
MITSUBISHI ELECTRIC's CITYMULTI can be easily connect to the building management system through BACnet . BACnet is the
appropriate transmission method and used in many of the backbone networks and also it is easy to combine with other equipment
TM
corresponding to BACnet .
One LM ADAPTER unit can connect up to 50 Groups/50 indoor units.
Using a single LONWORKS adapter (LM ADAPTER), you can connect up to a maximum of 50 indoor units.
One BACnetTM interface software manages up to 500 Groups/500 Indoor units. (10 G-50A/GB-50A units).
LMAP
LMAP 02
Example of Basic System Configuration.
Protocol converter
between LON WORKS
and M-NET
LMAP
L ON WORKS
M-NET
CITY MULTI System
Example of System Configuration
BACnet
M-NET
LAN
Outdoor unit
Outdoor unit
BMS
TM
CITY MULTI
System design made simple through integration of
various devices into a total control configuration.
WHM
WHM
G-50A
208-230V
60Hz
LON WORKS
(78kdps)
Central
monitor
TM
BACnet interface software
PAC-YG31CDA
M-NET
72
LMAP
M-NET
PAC-SC50KUA
Power supply unit
Indoor units
Max. 50 indoor units
Indoor units
Indoor units
Indoor units
Indoor units
G-50A
Lighting
Center
control device
Security
Remote
controller
Remote
controller
Remote
controller
Remote
controller
Remote
controller
Web
Browser
(Optional)
TG-2000A
(Optional)
LON WORKS
The building management system is connected to the CITY MULTI air conditioning system using LON WORKS , which is widely used on
field networks, allowing for an open network and savings in construction to face.
LON, LON WORKS and the Echelon logo are trademarks of Echelon Corporation registered in the United
States and other countries.
LONWORKS ® INTERFACE
FUNCTION
NETWORK VARIABLE
Control
ON/OFF
MODE OPERATION
SETPOINT ADJUSTMENT
FAN SPEED CONTROL
PERMIT / PROHIBIT
FILTER DIRTY RESET
Monitoring
ON/OFF
MODE OPERATION
SETPOINT ADJUSTMENT
FAN SPEED CONTROL
PERMIT / PROHIBIT
FAULT CODE
FILTER SIGN
ROOM TEMPERATURE
THERMO
Remote Controller
Page 35
BACnet ® INTERFACE
NETWORK VARIABLE
Run/Stop
Cooling/Drying/Heating/Auto/Fan
Cooling 19-30˚C,Heating 17-28˚C,Auto 19-28˚C
Lo-Mi1-Mi2-Hi
On/Off,Mode,Setpoint
Normal/Reset
Run/Stop
Cooling/Drying/Heating/Auto/Fan
Cooling 19-30˚C,Heating 17-28˚C,Auto 19-28˚C
Lo-Mi1-Mi2-Hi
On/Off,Mode,Setpoint
4 Character code - Indicates all unit alarms
-
FUNCTION
NETWORK VARIABLE
Control
ON/OFF
MODE OPERATION
SETPOINT ADJUSTMENT
FAN SPEED CONTROL
PERMIT / PROHIBIT
FILTER DIRTY RESET
Monitoring
ON/OFF
MODE OPERATION
SETPOINT ADJUSTMENT
FAN SPEED CONTROL
PERMIT / PROHIBIT
AIRFLOW DIRECTION
FAULT CODE
FILTER SIGN
ROOM TEMPERATURE
NETWORK VARIABLE
Run/Stop
Cooling/Drying/Heating/Auto/Fan
Cooling 19-30˚C,Heating 17-28˚C,Auto 19-28˚C
Lo-Mi1-Mi2-Hi
On/Off,Mode,Setpoint
Normal/Reset
Run/Stop
Cooling/Drying/Heating/Auto/Fan
Cooling 19-30˚C,Heating 17-28˚C,Auto 19-28˚C
Lo-Mi1-Mi2-Hi
On/Off,Mode,Setpoint
Horizontal - 60˚-80˚-100˚ swing
4 Character code - Indicates all unit alarms
-
Remote Controller
Page 36
Wide selection of indoor units
Ceiling cassette (4way air flow)
Page39
- Page40
Ceiling suspended
Page55
PLFY-P VAM-E
Model
P20
P25
P32
P40
P50
Capacity
2.2kW
2.8kW
3.6kW
4.5kW
5.6kW
PCFY-P VGM-E
Model
P63
P80
P100
P125
Model
P40
P63
P100
P125
Capacity
7.1kW
9.0kW
11.2kW
14.0kW
Capacity
4.5kW
7.1kW
11.2kW
14.0kW
Ceiling cassette (2way air flow)
Page41
- Page42
Wall mounted
Page57
PLFY-P VLMD-E
I ndoor unit
- Page56
- Page58
PKFY-P VAM-E
PKFY-P VGM-E
PKFY-P VFM-E
Model
P20
P25
P32
P40
P50
Capacity
2.2kW
2.8kW
3.6kW
4.5kW
5.6kW
Model
P63
P71
P80
P100
P125
Model
P20
P25
P32
P40
P50
P63
P100
Capacity
7.1kW
8.0kW
9.0kW
11.2kW
14.0kW
Capacity
2.2kW
2.8kW
3.6kW
4.5kW
5.6kW
7.1kW
11.2kW
Ceiling cassette (1way air flow)
Page43
- Page44
Floor standing
Page59
- Page60
PFFY-P VLEM-E
PMFY-P VBM-E
Ceiling cassette type 4-way airflow
Ceiling cassette type 2-way airflow
Ceiling cassette type 1-way airflow
PFFY-P VLRM-E
Model
P20
P25
P32
P40
Model
P20
P25
P32
P40
P50
P63
Capacity
2.2kW
2.8kW
3.6kW
4.5kW
Capacity
2.2kW
2.8kW
3.6kW
4.5kW
5.6kW
7.1kW
Ceiling concealed type
Ceiling concealed
Ceiling suspended type
Page45
- Page54
Fresh Air Intake
Page61
- Page62
New
PEFY-P VMH-E-F
Wall mounted type
PEFY-P VMR-E-L/R
Floor standing type
PEFY-P VML-E
New
PDFY-P VM-E
PEFY-P VMS-E
OA Processing Units
PEFY-P VMH-E
Model
P20
P25
P32
P40
P50
P63
P71
Capacity
2.2kW
2.8kW
3.6kW
4.5kW
5.6kW
7.1kW
8.0kW
P125
P140
P200
Model
P80
P100
Capacity
9.0kW
11.2kW
14.0kW 16.0kW 22.4kW
P250
Model
P80
P140
P200
P250
28.0kW
Capacity
9.0kW
16.0kW
22.4kW
28.0kW
Indoor unit
Page 37
Page 38
INDOOR UNIT
Ceiling cassette type
4-way airflow
Specifications
Power source
kW
❇1
❇1 BTU/h
kW
❇2
❇2 kcal/h
kW
❇1
Heating capacity
❇1 kcal/h
❇1 BTU/h
Power
Cooling
kW
consumption
Heating
kW
Cooling
A
Current
Heating
A
External finish(Munsel No.)
mm
❇3
Dimension H ✕ W ✕ D
in.
Net weight
❇3 kg(lbs.)
Heat exchanger
Cooling capacity
The new power cassette VAM offers 72 different airflow patterns, making
it ideal for applications with ceilings up to 4.2 m(13-13/16ft) in height.
Type
❇3
Airflow rate
(Low-Mid2-Mid1-High)
Fan
Motor
External static pressure
Type
Output
3
m /min
L/s
cfm
Pa
PLFY-P32VAM-E PLFY-P40VAM-E PLFY-P50VAM-E PLFY-P63VAM-E PLFY-P80VAM-E
~ 220-240V 50Hz / ~ 220-230V 60Hz
3.6
4.5
9.0
5.6
7.1
12,300
15,400
30,700
19,100
24,200
3.7
4.7
9.3
5.8
7.3
3,150
4,000
8,000
5,000
6,300
4.0
5.0
10.0
6.3
8.0
3,400
4,300
8,600
5,400
6,900
13,600
17,100
34,100
21,500
27,300
0.14
0.12
0.18
0.16
0.14
0.12
0.18
0.16
0.68
0.59
0.86
0.78
0.59
0.86
0.78
0.68
Panel : 0.70Y 8.59/0.97
258<30> ✕ 840<950> ✕ 840<950>
10-3/16<1-3/16> ✕ 33-1/8<37-7/16> ✕ 33-1/8<37-7/16>
22<5> (49<12>)
24<5> (53<12>)
Cross fin (Aluminum plate fin and copper tube)
Turbo fan
11-12-13-14
12-13-14-16
14-15-16-18
16-18-20-22
183-200-217-233
200-217-233-267
233-250-267-300 267-300-333-367
388-424-459-494
424-459-494-565
494-530-565-636 565-636-706-777
0
Gas
(Flare) mm(in.)
Liquid mm(in.)
(Flare)
Drain pipe diameter
mm(in.)
Noise level (Lo-Mid2-Mid1-Hi) ❇3 ❇4 dB(A)
Easy Installation
Outstanding Specifications
Drain water pipe lifted to 850mm(33-1/2in.)
Wide-flow air outlet delivers a comforting breeze
11.2
38,200
11.6
10,000
12.5
10,800
42,700
0.30
0.30
1.43
1.43
ø12.7 (1/2)
ø12.7 (1/2) / ø15.88 (5/8)
(Compatible)
ø6.35 (1/4)
ø6.35 (1/4) / ø9.52 (3/8)
(Compatible)
27-28-29-31
27-28-30-32
14.0
47,800
14.5
12,500
16.0
13,800
54,600
0.34
0.34
1.64
1.64
298 (30) ✕ 840 (950) ✕ 840 (950)
11-3/4<1-3/16> ✕ 33-1/8<37-7/16> ✕ 33-1/8<37-7/16>
32<5> (71<12>)
21-24-27-29
19-22-25-27
317-367-417-450 350-400-450-483
671-777-883-953 742-848-953-1024
Single phase induction motor
0.070
PP Honeycomb
kW
Air filter
Refrigerant
pipe diameter
PLFY-P100VAM-E PLFY-P125VAM-E
0.120
ø15.88(5/8)
ø15.88 (5/8) / ø19.05 (3/4) (Compatible)
ø9.52 (3/8)
O.D. 32 (1-1/4) <VP-25>
28-29-31-33
30-32-35-37
33-36-39-41
35-38-41-43
The airflow of the VAM power cassette is powerful enough to
warm atrium-type ceilings up to 4.2 m(13-13/16ft) in height.
850mm
(33-1/2in.)
m (ft)
4-way high ceiling 2
4-way standard
3.2
(10-1/2)
4.2
(13-13/16)
Superb Features
First in the industry to offer 72 airflow patterns
The 72 different airflow patterns provide the best solution for
varying room layouts and air-conditioning requirements. For extra versatility, you can also select from two-, three- or four-way
outlets. What's more, the addition of separate motors to the individual vanes enables manual control that-together with remote control vane settings-make possible highly customized
and flexible airflow patterns.
4-, 3-, or 2way outlet
selection
3.6
(11-13/16)
3-way standard
Specifications according to ceiling height and number of vents
Power Cassette VAM
Standard
High ceiling 1 High ceiling 2
4-way
3.2
3.6
4.2
3-way
3.6
4.0
4.2
2-way
4.0
4.2
---
Note:
Fixed airflow
direction per
vane
Motor
for the
vane
72 airflow patterns
*Optional air outlet shutter plate is
necessary for two-or three-way airflow
settings. The noise level may increase
during two- or three-way airflow setup.
Indoor unit
Page 39
❇1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor 27˚C(80.6˚F)DB/19˚C(66.2˚F)WB,Outdoor 35˚C(95˚F)DB
Heating : Indoor 20˚C(68˚F)DB,Outdoor 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇2 Cooling capacity indicates the maximum value at operation under the following condition
Cooling : Indoor 27˚C(80.6˚F)DB/19.5˚C(67.1˚F)WB,Outdoor 35˚C(95˚F)DB.
Heating : Indoor 21˚C(69.8˚F)DB,Outdoor 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇3 External dimension/ net weight are shown in <unit/panel> , and airflow rate/noise level are in (low-middle2-middle1-high).
❇4 It is measured in anechoic room.
Specifications
Page 40
INDOOR UNIT
Ceiling cassette type
2-way airflow
Specifications
PLFY-P20VLMD-E
PLFY-P25VLMD-E
PLFY-P32VLMD-E
PLFY-P40VLMD-E
~ 220-240V 50Hz / ~ 220-230V 60Hz
3.6
2.2
2.8
4.5
12,300
7,500
9,600
15,400
3.7
2.3
2.9
4.7
3,150
2,000
2,500
4,000
4.0
2.5
3.2
5.0
3,400
2,200
2,800
4,300
13,600
8,500
10,900
17,100
0.072 / 0.075
0.072 / 0.075
0.072 / 0.075
0.081 / 0.085
0.065 / 0.069
0.065 / 0.069
0.065 / 0.069
0.074 / 0.079
0.36 / 0.37
0.36 / 0.37
0.36 / 0.37
0.40 / 0.42
0.30 / 0.32
0.30 / 0.32
0.30 / 0.32
0.34 / 0.37
Unit: Galvanizing Decoration Panel: ABS (0.7Y 8.59/0.97) Service Panel: Galvanizing (0.7Y 8.59/0.97)
290<20> ✕ 776<1,080> ✕ 634<710>
11-7/16<13/16> ✕ 30-9/16<42-9/16> ✕ 25<28>
24 <6.5> (53<15>)
23 <6.5> (51<15>)
Cross fin
Turbo fan ✕ 1
7.0-8.5-10.5
6.5-8.0-9.5
117-142-175
108-133-158
247-300-371
230-283-335
0
Single phase induction motor
0.015
PP honeycomb fabric (long life filter)
ø12.7 (1/2)
ø6.35 (1/4)
O.D.32 (1-1/4)
29-33-36
27-30-33
30-34-37
28-31-34
Power source
❇1
❇1
❇2
❇2
❇1
Heating capacity
❇1
❇1
Power
Cooling
consumption
Heating
Cooling
Current
Heating
External finish
kW
BTU/h
kW
kcal/h
kW
kcal/h
BTU/h
kW
kW
A
A
❇3
mm
in.
kg(lbs.)
Cooling capacity
Slim body of 290mm(11-7/16in.) height.
Slim body - only 290mm(11-7/16in.) height
The slimline body is highly suitable for installation in narrow
ceiling spaces and for replacing obsolete air-conditioning
equipment in older buildings. The main unit is only 290mm(117/16in.) height.
-7/16in.)
(11
Dimension H ✕ W ✕ D
❇3
Net weight
Heat exchanger
Type
3
Airflow rate
(Lo-Mid-Hi)
Fan
Motor
External static pressure
Type
Output
m /min
L/s
cfm
Pa
kW
Air filter
Refrigerant
Gas(Flare) mm(in.)
pipe diameter Liquid(Flare) mm(in.)
Drain pipe diameter
mm(in.)
Noise level
220V,240V dB(A)
(Lo-Mid-Hi) ❇4 230V
dB(A)
PLFY-P63VLMD-E
PLFY-P80VLMD-E
PLFY-P100VLMD-E
PLFY-P125VLMD-E
~ 220-240V 50Hz / ~ 220-230V 60Hz
5.6
7.1
9.0
11.2
14.0
19,100
24,200
30,700
38,200
47,800
5.8
7.3
9.3
11.6
14.5
5,000
6,300
8,000
10,000
12,500
6.3
8.0
10.0
12.5
16.0
5,400
6,900
8,600
10,800
13,800
21,500
27,300
34,100
42,700
54,600
0.082 / 0.086
0.101 / 0.105
0.147 / 0.156
0.157 / 0.186
0.28 / 0.28
0.075 / 0.080
0.094 / 0.099
0.140 / 0.150
0.150 / 0.180
0.27 / 0.27
0.41 / 0.43
0.49 / 0.51
0.72 / 0.74
0.75 / 0.88
1.35 / 1.35
0.35 / 0.38
0.43 / 0.46
0.66 / 0.69
0.69 / 0.83
1.33 / 1.33
Unit: Galvanizing Decoration Panel: ABS (0.7Y 8.59 / 0.97) Service Panel: Galvanizing (0.7Y 8.59 / 0.97)
290<20> ✕ 1,446<1,750> ✕ 634<710>
290<20> ✕ 946<1,250> ✕ 634<710>
290<20> ✕ 1,708<2,010> ✕ 606<710>
11-7/16<13/16> ✕ 37-1/4<49-1/4> ✕ 25< 28>
11-7/16<13/16> ✕ 56-15/16<68-15/16> ✕ 25< 28> 11-7/16<13/16> ✕ 67-1/4<79-3/16> ✕ 23-7/8< 28>
56 <13.0> (124<29>)
27 <7.5> (60<17>)
28 <7.5> (62<17>)
44 <12.5> (98<28>)
47 <12.5> (104<28>)
Cross fin
Turbo fan ✕ 2
Sirocco fan ✕ 4
Turbo fan ✕ 1
24.0-27.0-30.0-33.0
9.0-11.0-12.5
10.0-13.0-15.5
17.5-21.0-25.0
15.5-18.5-22.0
400-450-500-550
150-183-208
167-217-258
292-350-417
258-308-367
848-953-1,059-1,165
318-388-441
353-459-547
618-742-883
547-653-777
0
Single phase induction motor
0.020
0.078 ✕ 2 (at 240V)
0.030 (at 240V)
0.020 (at 240V)
Synthetic fiber unwoven
PP honeycomb fabric (long life filter)
cloth filter (long life)
PLFY-P50VLMD-E
Terminal block on outside of main unit
makes wiring easier
Equipped with drain water lift-up
mechanism as standard
Power source
❇1
❇1
❇2
❇2
❇1
Heating capacity
❇1
❇1
Power
Cooling
consumption
Heating
Cooling
Current
Heating
External finish
❇3
Dimension H ✕ W ✕ D
Cooling capacity
The drain can be positioned anywhere up to 600mm(23-5/8in.)
from the ceiling's surface, providing greater freedom with long
cross-piping and allowing more versatility with piping layouts.
Drain height
max. 593(23-3/8)
Main unit height - 290(11-7/16)
Ceiling surface
Newly designed decorative panel with air flow
switching and swing functions as a standard feature
593
mm (in.)
Compact unit and low noise level attained!
Fresh air directly taken in
Fresh air can be taken in to the main unit directly (optional accessories needed.
Net weight
❇3
Heat exchanger
Type
Airflow rate
Fan
(P50~P100:Lo-Mid-Hi)
(P125:Lo-Mid2-Mid1-Hi)
External static pressure
Type
Motor
Output
kW
BTU/h
kW
kcal/h
kW
kcal/h
BTU/h
kW
kW
A
A
mm
in.
kg(lbs.)
3
m /min
L/s
cfm
Pa
kW
Air filter
Gas
(Flare)
mm(in.)
ø12.7 (1/2)
Liquid
mm(in.)
(Flare)
Drain pipe diameter
mm(in.)
Noise level
220V,240V dB(A)
(Lo-Mid-Hi) ❇4 230V
dB(A)
ø 6.35 (1/4)
Refrigerant
pipe diameter
31-34-37
32-35-38
ø15.88 (5/8)
ø15.88 (5/8)
ø9.52 (3/8)
32-37-39
33-38-40
O.D.32 (1-1/4)
33-36-39
34-37-40
36-39-42
37-41-43
40-42-44-46
(Lo-Mid2-Mid1-Hi)
Note:
❇1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor 27˚C(80.6˚F)DB/19˚C(66.2˚F)WB,Outdoor 35˚C(95˚F)DB
Heating : Indoor 20˚C(68˚F)DB,Outdoor 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇2 Cooling capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor 27˚C(80.6˚F)DB/19.5˚C(97.1˚F)WB,Outdoor 35˚C(95˚F)DB
Heating : Indoor 21˚C(69.8˚F)DB,Outdoor 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇3 The figure in < > indicates panel's
❇4 It is measured in anechoic room.
Indoor unit
Page 41
Specifications
Page 42
INDOOR UNIT
Ceiling cassette type
1-way airflow
Specifications
PMFY-P20VBM-E
Power source
Cooling capacity
Heating capacity
Compact and lightweight body perfect
for limited ceiling space applications.
Power
consumption
Current
❇1
❇1
❇2
❇2
❇1
❇1
❇1
Cooling
Heating
Cooling
Heating
kW
BTU/h
kW
kcal/h
kW
kcal/h
BTU/h
kW
kW
A
A
External finish
Dimension H ✕ W ✕ D ❇3 mm(in.)
Net weight
kg(lbs.)
❇3
Heat exchanger
Type
❇3 m3/min
Airflow rate
Fan
L/s
(Low-Mid2-Mid1-High)
cfm
External staticpressure
Pa
Type
Motor
Output
kW
Air filter
Refrigerant
Gas(Flare) mm(in.)
pipe diameter Liquid(Flare) mm(in.)
Drain pipe diameter
mm(in.)
Noise level (Lo-Mid2-Mid1-Hi) ❇4 dB(A)
Compact size for smooth
installation and maintenance
Unit body size has been standardized for
all models at 854mm for easier installation. Body weight is only 14kg for the
main unit and 3kg for the panel, making
this unit one of the lightest in the industry.
Drain lift-up mechanism
The drain can be positioned anywhere up to 600mm(23-5/8in.) from the ceiling's surface.
max.
402
(15-7/8)
max.
600
(23-5/8)
Quiet operation
Newly developed airflow control technology reduces noise level to only 27dB
(P20VBM) for industry-leading quiet operation.
PMFY-P25VBM-E
PMFY-P32VBM-E
PMFY-P40VBM-E
~ 220-240V 50Hz / ~ 220V 60Hz
4.5
2.8
2.2
3.6
15,400
9,600
7,500
12,300
4.7
2.9
2.3
3.7
4,000
2,500
2,000
3,150
5.0
3.2
2.5
4.0
4,300
2,800
2,200
3,400
17,100
10,900
8,500
13,600
0.054
0.044
0.042
0.054
0.044
0.042
0.26
0.21
0.20
0.26
0.21
0.20
Panel : 0.98Y8.99/0.63
230<30> ✕ 812<1,000> ✕ 395<470> (9-1/16<1-3/16> ✕ 32<39-3/8> ✕ 15-9/16<18-9/16>)
14 <3.0> (31<7>)
Cross fin (Aluminum plate fin and copper tube)
Line flow fan ✕ 1
7.7-8.7-9.7-10.7
6.5-7.2-8.0-8.7
7.3-8.0-8.6-9.3
128-145-162-178
108-120-133-145
122-133-143-155
272-307-343-378
230-254-283-307
258-283-304-328
0
Single phase induction motor
0.028
PP Honeycomb fabric
ø12.7 (1/2)
ø6.35 (1/4)
O.D. 25 (1) <VP-20>
27-30-33-35
33-35-37-39
32-34-36-37
230
(9-11/16)
PMFY-VBM
198
(7-13/16)
mm (in.)
Note:
❇1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor 27˚C(80.6˚F)DB/19˚C(66.2˚F)WB,Outdoor 35˚C(95˚F)DB
Heating : Indoor 20˚C(68˚F)DB,Outdoor 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇2 Cooling capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor 27˚C(80.6˚F)DB/19.5˚C(67.1˚F)WB,Outdoor 35˚C(95˚F)DB
Heating : Indoor 21˚C(69.8˚F)DB,Outdoor 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇3 External dimension / net weight are shown in <panel>, and airflow rate/noise level are in (low-middle2-middle1-high).
❇4 It is measured in anechoic room.
Indoor unit
Page 43
Specifications
Page 44
INDOOR UNIT
Ceiling concealed
type
Specifications
Static Presure
Width
5Pa
640mm
25-6/32in.
Ultra
Low Noise
PEFY-P20VMR-E-L
Power source
Cooling capacity
Piping connection
L model
R model
Heating capacity
Problem solver for residential hotels, museums, libraries,
or hospitals where low noise is especially a must!
Power
consumption
Current
❇1
❇1
❇2
❇2
❇1
❇1
❇1
Cooling
Heating
Cooling
Heating
kW
BTU/h
kW
kcal/h
kW
kcal/h
BTU/h
kW
kW
A
A
2.2
7,500
2.3
2,000
2.5
2,200
8,500
0.06 / 0.06
0.06 / 0.06
0.29 / 0.29
0.29 / 0.29
External finish
Dimension H ✕ W ✕ D
Inlet
Card Key
Key
Switch
Switch
Noise measurement point
Noise measurement point
*According to the data measured in Mitsubishi Electric laboratory
Operable by card key switch
mm
in.
kg(lbs.)
❇3
Net weight
Heat exchanger
Type
Airflow rate
3
m /min
(Lo-Mid2-Mid1-Hi)
Fan
External static
Pa
pressure ❇3
Type
Motor
Output
kW
Air filter
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
mm(in.)
Drain pipe diameter
220V
Noise level
dB(A)
230V
(Lo-Mid-Hi)
❇4 240V
Ultra low noise
Realizing the low level noise that is NC21 around a bed and
N22 around a desk when the high notch.
It contributes to create a quiet indoor environment.
*Outlet is elbow-constructed using a glass wool duct.
The noise level is changed by the room size or the setting condition of the unit.
Cooling capacity
Heating capacity
Power
consumption
Current
Enables to install for symmetric design room
Cooling
Heating
Cooling
Heating
kW
BTU/h
kW
kcal/h
kW
kcal/h
BTU/h
kW
kW
A
A
External finish
Both of Left piping / Right piping, control box, are available.
It's selectable for layout of each room.
Plus easy maintenance from the access door in the prefabricated bath.
*Seen from an anterior view, the pipe and control box are on
the right side of –R type.
Dimension H ✕ W ✕ D
Energy-saving by prevention of forgetting the switch off
Compact & Simple operation remote controller is available.
*This remote controller can operate only start / stop, indoor temperature control and wind speed control. Centralized remote
controller must be used together.
Enables a prevention to forget the switch in a vacant room off
by the centralized remote controller like G-50.
mm
in.
kg(lbs.)
❇3
Net weight
Heat exchanger
Type
Airflow rate
3
m /min
(Lo-Mid2-Mid1-Hi)
Fan
External static
Pa
pressure ❇3
Type
Motor
Output
kW
Air filter
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
mm(in.)
Drain pipe diameter
220V
Noise level
dB(A)
230V
(Lo-Mid-Hi)
❇4 240V
3.6
12,300
3.7
3,150
4.0
3,400
13,600
0.07 / 0.08
0.07 / 0.08
0.34 / 0.38
0.34 / 0.38
4.8-5.8-9.3
5
1-phase induction motor
0.018
0.023
PP Honeycomb fabric (washable)
ø6.35 (1/4)
ø12.7(1/2)
O.D. 26 (1)
20-25-33
21-26-35
22-27-33
20-25-30
21-26-32
22-27-30
PEFY-P20VMR-E-R
❇1
❇1
❇2
❇2
❇1
❇1
❇1
PEFY-P32VMR-E-L
4.8-5.8-7.9
Power source
Prepared a contact for a card key. It’s possible to operate / stop
by taking a card key in and out.
PEFY-P25VMR-E-L
1-phase 220/230/240V 50Hz 220/230V 60Hz
2.8
9,600
2.9
2,500
3.2
2,800
10,900
0.06 / 0.06
0.06 / 0.06
0.29 / 0.29
0.29 / 0.29
Galvanized
292 ✕ 640 ✕ 580
18 (40)
Cross fin (Aluminum fin and copper tube)
Sirocco fan ✕ 1
2.2
7,500
2.3
2,000
2.5
2,200
8,500
0.06 / 0.06
0.06 / 0.06
0.29 / 0.29
0.29 / 0.29
PEFY-P25VMR-E-R
1-phase 220/230/240 V 50Hz 220/230V 60Hz
2.8
9,600
2.9
2,500
3.2
2,800
10,900
0.06 / 0.06
0.06 / 0.06
0.29 / 0.29
0.29 / 0.29
Galvanized
292 ✕ 640 ✕ 580
18 (40)
Cross fin (Aluminum fin and copper tube)
Sirocco fan ✕ 1
PEFY-P32VMR-E-R
4.8-5.8-7.9
3.6
12,300
3.7
3,150
4.0
3,400
13,600
0.07 / 0.08
0.07 / 0.08
0.34 / 0.38
0.34 / 0.38
4.8-5.8-9.3
5
1-phase induction motor
0.018
0.023
PP Honeycomb fabric (washable)
ø6.35 (1/4)
ø12.7 (1/2)
O.D. 26(1)
20-25-30
21-26-32
22-27-30
20-25-33
21-26-35
22-27-33
Note:
❇1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor 27˚C (81˚F) DB/19˚C (66˚F) WB, Outdoor 35˚C (95˚F) DB
Heating : Indoor 20˚C (68˚F) DB, Outdoor 7˚C (45˚F) DB/6˚C (43˚F) WB
❇2 Cooling capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor 27˚C (80.6˚F) DB/19.5˚C (67.1˚F) WB,Outdoor 35˚C (95˚F) DB
Heating : Indoor 21˚C (69.8˚F) DB,Outdoor 7˚C (44.6˚F) DB/6˚C (42.8˚F) WB
❇3 The external static pressure is set to 100Pa (at 220V) / 150Pa (at 230, 240V) at factory shipment.
❇4 Measured in anechoic room. Noise levels of the unit with a rear air inlet. (Noise levels are higher than the unit with a bottom air inlet.)
Indoor unit
Page 45
Specifications
Page 46
INDOOR UNIT
Ceiling concealed
type
Specifications
Static Presure
Height
5~50Pa
200mm
PEFY-P20VMS-E
Power source
Cooling capacity
Width
Low Noise
7-28/32in.
900mm
35-14/32in.
Heating capacity
Increased design flexibility for the places where low noise
operation is especially needed from an ultra thin body.
Changeable static pressure
(4 stage 5-15-35-50Pa)
❇1
❇1
❇2
❇2
❇1
❇1
❇1
kW
BTU/h
kW
kcal/h
kW
kcal/h
BTU/h
kW
A
Power input
Current
Type ✕ Quantity
Pa
External static press
Fan
Motor type
❇3
kW
Motor output
3
Airflow rate(Lo-Mid-Hi) m /min
External finish
External dimension
mm
H✕W✕D
In.
Net weight
kg
mm(in.)
Liquid
Refrigerant
piping diameter Gas
mm(in.)
Drain piping diameter
mm(in.)
Noise level (Lo-Mid-Hi)
dB<A>
(mesured in anechoic room)
Air filter
Heat exchanger
PEFY-P25VMS-E
PEFY-P32VMS-E
PEFY-P40VMS-E
PEFY-P50VMS-E
PEFY-P63VMS-E
1-phase 220-240V 50Hz 1-phase 220-230V 60Hz
2.2
2.8
3.6
4.5
5.6
7.1
7,500
9,600
12,300
5.0
6.3
8.0
2.3
2.9
3.7
4.7
5.8
7.3
2,000
2,500
3,150
4,000
5,000
6,300
2.5
3.2
4.0
5.0
6.3
8.0
2,200
4,300
5,400
6,900
2,800
3,400
8,500
17,100
21,500
27,300
10,900
13,600
0.06
0.08
0.06
0.09
0.07
0.11
0.09
0.13
0.11
0.14
0.12
0.08
0.28
0.39
0.28
0.44
0.33
0.53
0.42
0.63
0.52
0.68
0.57
0.39
Sirocco fan ✕ 4
Sirocco fan ✕ 3
5-15-35-50
DC brushless motor
0.096
8-9.5-11
9.5-11-13
12-14-16.5
7.5-8.5-10
6-7-8
Galvanized
200 ✕ 900 ✕ 700
200 ✕ 1100 ✕ 700
7-7/8 ✕ 35-7/16 ✕ 27-9/16
7-7/8 ✕ 43-5/16 ✕ 27-9/16
24
23
28
ø6.35 (ø1/4) Brazed ø9.52 (ø3/8) Brazed
ø6.35 (ø1/4) Brazed
ø12.7 (ø1/2) Brazed ø15.88 (ø5/8) Brazed
ø12.7 (ø1/2) Brazed
O.D. 32 (1-1/4)
25-28-30
22-25-27
28-30-33
30-32-35
30-33-36
PP Honeycomb fabric (washable)
Cross fin (Aluminium fin and copper tube)
Ultra low height unit with 200mm (7-28/32in.) high
Can be installed easily in tight spaces, such as ceiling cavities or drop-ceilings.
More than 20mm
Drain lift-up pump is attached
as standard.
More than 20mm
Changeable air flow rate
(3 stage low-middle-high)
Ceiling surface
Access door
Make the access door at the appointed position properly
for service maintenance.
Filter is attached as standard.
Reduced noise thanks to the use of newly designed centrifugal fan and coil
Noise level table (Standard static pressure)
dB(A)
Capacity
Noise Level
Fan Speed
High
Mid
Low
P20
27
25
22
P25
27
25
22
P32
30
28
25
Note:
❇1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor : 27˚CD.B./19˚CW.B. (81˚FD.B. / 66˚FW.B.) Outdoor : 35˚CD.B. (95˚FD.B. )
Heating : Indoor : 20˚CD.B. (68˚FD.B.) Outdoor : 7˚CD.B. / 6˚CW.B. (45˚FD.B. / 43˚FW.B.)
Pipe length : 7.5m (24-9/16ft)
Height difference : 0m (0ft)
❇2 Cooling Indoor: 27˚C(80.6˚F)DB/19.5˚C(67.1˚F)WB, Outdoor: 35˚C(95˚F)DB
Heating Indoor: 21˚C(69.8˚F)DB, Outdoor: 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇3 The external static pressure is set to 15 Pa at factory shipment.
Indoor unit
Page 47
Specifications
Page 48
INDOOR UNIT
Ceiling Concealed Type
Specifications
PDFY-P20VM-E
PDFY-P25VM-E
2.2
7,500
2.3
2,000
2.5
8,500
2.6
2,250
2.8
9,600
2.9
2,500
3.2
10,900
3.3
2,800
0.11 / 0.12
0.11 / 0.12
0.53 / 0.58
0.53 / 0.58
Power source
Static Presure
30~100(130)Pa
Achieving creative air conditioning design through a rich array
of system materials.
❇1
❇1
Cooling capacity
❇2
❇2
❇1
❇1
Heating capacity
❇2
❇2
Power consumption Cooling
(50/60Hz)
Heating
Cooling
Current
Heating
External finish
kW
BTU/h
kW
kcal/h
kW
BTU/h
kW
kcal/h
kW
kW
A
A
Dimension H ✕ W ✕ D
mm
in.
kg(lbs)
Multiple installation patterns for assorted applications and locations
Bottom intake (directly attached to panel)
Bottom intake (using canvas duct)
Adjustable setting of external static
pressure to meet system configuration
and installation conditions
Static pressure settings can be increased
to adjust to all kinds of ducts as well as
functional upgrade option (high performance filter etc). An increase from the
standard 50Pa to 130 Pa is possible to
cope with various layout configurations.
Canvas duct for
bottom section
Maintenance panel
with air intake
Maintenance panel
with air intake
All-duct system
Ceiling chamber system (1)
A rear intake can
also be used
Square duct flange
Rear intake filter box
Maintenance panel
Ceiling chamber system (2)
*For P100~P125
Maintenance panel
A bottom intake can
also be used
Hanging ceiling installation
Rear intake filter box
Slim 295mm main unit with
optional drain up mechanism ensures
up to 600 mm(23-5/8in.) of lift
Max.
600
(23-5/8)
System ceiling
Square duct flange
Maintenance
panel with
air intake
Blower unit
(With auto-vanes)
Flexible installation for a variety of layouts
Max.416
(16-7/16)
184(16-7/16)
110300
(4-3/8~
11-13/16)
PDFY-P50VM-E
4.5
15,400
4.7
4,000
5.0
17,100
5.2
4,500
5.6
19,100
5.8
5,000
6.3
21,500
6.5
5,600
0.13 / 0.15
0.13 / 0.15
0.60 / 0.71
0.60 / 0.71
Galvanizing
27 (60)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan ✕ 1
6.0-6.5-7.5-8.5
kW
BTU/h
kW
kcal/h
kW
BTU/h
kW
kcal/h
kW
kW
A
A
Dimension H ✕ W ✕ D
mm
in.
kg(lbs)
Net weight
Heat exchanger
Type
Airflow rate
3
m /min
Fan
(Lo-Mid2-Mid1-Hi)
External static
Pa
pressure ❇3
Type
Motor
kW
Output
❇4
Air filter
Gas
mm(in.)
Refrigerant
(Flare)
pipe diameter Liquid
mm(in.)
(Flare)
Drain pipe diameter
mm(in.)
Noise level (Lo-Mid2-Mid1-Hi) ❇6 dB(A)
Sirocco fan ✕ 2
10.0-11.0-12.5-14.0
30 / 50 / 100
ø12.7 (1/2)
ø12.7 (1/2)
ø6.35 (1/4)
ø6.35 (1/4)
O.D. 32 (1-1/4) <VP-25>
28-30-33-36
PDFY-P63VM-E
❇1
❇1
❇2
❇2
❇1
❇1
Heating capacity
❇2
❇2
Power
Cooling
consumption
Heating
Cooling
Current
Heating
External finish
295 ✕ 960 ✕ 735
11-5/8 ✕ 37-13/16 ✕ 28-15/16
32 (71)
34 (75)
Single phase induction motor
0.075 (at 240V)
Synthethic fiber unwoven cloth filter (long life)
Power source
Cooling capacity
PDFY-P40VM-E
295 ✕ 710 ✕ 735
11-5/8 ✕ 28 ✕ 28-15/16
25.5 (57)
Net weight
Heat exchanger
Type
Airflow rate
3
m /min
Fan
(Lo-Mid2-Mid1-Hi)
External static
Pa
pressure ❇3
Type
Motor
kW
Output
❇4
Air filter
❇5
Gas
mm(in.)
Refrigerant
(Flare)
pipe diameter Liquid
mm(in.)
(Flare)
Drain pipe diameter
mm(in.)
Noise level (Lo-Mid2-Mid1-Hi) ❇6 dB(A)
Air outlet side compatible
with a variety of ducts (optional)
PDFY-P32VM-E
~ 220-240V 50Hz / ~ 220V 60Hz
3.6
12,300
3.7
3,150
4.0
13,600
4.1
3,550
7.1
24,200
7.3
6,300
8.0
27,300
8.3
7,100
0.14 / 0.17
0.14 / 0.17
0.68 / 0.82
0.68 / 0.82
12.5-14.0-16.0-18.0
34-36-37-39
PDFY-P71VM-E
PDFY-P80VM-E
PDFY-P100VM-E
PDFY-P125VM-E
~ 220-240V 50Hz / ~ 220V 60Hz
11.2
8.0
14.0
9.0
38,200
27,300
47,800
30,700
11.6
8.3
14.5
9.3
10,000
7,100
12,500
8,000
12.5
9.0
16.0
10.0
42,700
30,700
54,600
34,100
13.0
9.3
16.3
10.5
11,200
8,000
14,000
9,000
0.27-0.31 / 0.29
0.15 / 0.18
0.33-0.38 / 0.39
0.17 / 0.21
0.27-0.31 / 0.29
0.15 / 0.18
0.33-0.38 / 0.39
0.17 / 0.21
1.28-1.34 / 1.36
0.72 / 0.88
1.55-1.63 / 1.84
0.82 / 1.01
1.28-1.34 / 1.36
0.72 / 0.88
1.55-1.63 / 1.84
0.82 / 1.01
Galvanizing
335 ✕ 1,510 ✕ 775
295 ✕ 1,160 ✕ 735
13-1/4 ✕ 59-1/2 ✕ 30-9/16
11-5/8 ✕ 45-11/16 ✕ 28-15/16
52 (115)
39 (86)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan ✕ 2
19.5-28.0
13.5-15.5-17.5-19.5
14.5-16.5-18.5-21.0
(Lo-Hi)
24.0-34.0
(Lo-Hi)
50 / 100 / 130
30 / 50 / 100
Single phase induction motor
0.140 (at 240V)
0.078 (at 240V)
Synthethic fiber unwoven cloth filter (long life)
0.190 (at 240V)
ø 15.88 (5/8)
ø15.88 (5/8)
ø9.52 (3/8)
30-34-36-39
32-35-37-40
O.D. 32 (1-1/4) <VP-25>
34-37-40-42
34-42 (37-44) ❇5
40-45 (42-46) ❇5
Note:
Long room
Cooling/heating capacity indicates the maximum value at operation under the following condition.
mm (in.)
L-shaped rooms
Room with fixed
ceiling fixtures
❇1 Cooling Indoor: 27˚C(80.6˚F)DB/19˚C(66.2˚F)WB, Outdoor: 35˚C(95˚F)DB
Heating Indoor: 20˚C(68˚F)DB, Outdoor: 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇2 Cooling Indoor: 27˚C(80.6˚F)DB/19.5˚C(67.1˚F)WB, Outdoor: 35˚C(95˚F)DB
Heating Indoor: 21˚C(69.8˚F)DB, Outdoor: 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇3 The external static pressure is set to 50Pa at factory shipment.
❇4 The value for Models 20-80 are that at the external static pressure of 100Pa, while the value for Models 100-125 are that at the external static pressure of 130Pa.
❇5 The figure in ( ) indicates noise level at 240V/50Hz.
❇6 It is measured in anechoic room.
Indoor unit
Page 49
Specifications
Page 50
Specifications
Static Presure
Width
5Pa
720mm
PEFY-P20VML-E
PEFY-P25VML-E
~ 220-240V 50Hz / 60Hz
2.8
9,600
2.9
2,500
3.2
2,800
10,900
Power source
Cooling capacity
28-11/32in.
Heating capacity
Increased design flexibility for hotel and residential use
from an thin body.
❇1
❇1
❇2
❇2
❇1
❇1
❇1
Power consumption Cooling
Heating
(50/60Hz)
Cooling
Current
Heating
External finish
Dimension H ✕ W ✕ D
Net weight
Heat exchanger
Type
kW
BTU/h
kW
kcal/h
kW
kcal/h
BTU/h
kW
kW
A
A
mm
in.
kg(lbs.)
3
Airflow rate
(Lo-Mid-Hi)
Fan
Motor
External static pressure
Type
Output
2.2
7,500
2.3
2,000
2.5
2,200
8,500
0.05 / 0.06
0.05 / 0.06
0.24 / 0.28
0.24 / 0.28
m /min
L/s
cfm
Pa
4.8-5.8-7.9
80-97-132
170-205-279
kW
0.023
4.8-5.8-9.5
80-97-158
170-205-335
5
Single phase induction motor
0.032
PP Honeycomb fabric (washable)
Gas
mm(in.)
(Brazing)
Liquid
mm(in.)
(Brazing)
Drain pipe diameter
Noise level (Lo-Mid-Hi) ❇5
Low static pressure (5Pa) meets
an application requiring direct air flow
3.6
12,300
3.7
3,150
4.0
3,400
13,600
0.07 / 0.09
0.07 / 0.09
0.32 / 0.42
0.32 / 0.42
Galvanizing
225 ✕ 720 ✕ 550
8-7/8 ✕ 28-3/8 ✕ 21-11/16
18 (40)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan ✕ 1
Air filter
Refrigerant
pipe diameter
PEFY-P32VML-E
ø12.7 (1/2)
ø6.35 (1/4)
R1 (External thread)
dB(A)
25-29-36
25-29-40
Low height unit with 225mm(8-7/8in.) high
Can be installed easily in tight spaces, such as ceiling cavities or drop-ceilings.
Notes: Drain lift-up pump not applicable.
Changeable air flow rate
(3 stage low-middle-high)
Service space:500(19-11/16) or more
Hole pitch
100(3-15/16) or more
20(13/16) or more
245(9-11/16)+Drain
covering
configuration 225
(8-7/8)
height
Flexible installation by rear
or bottom return air inlet.
30(1-3/16)
Access door
20/25/32 Model
Filter is attached as standard.
Reduced noise thanks to the use of
newly designed centrifugal fan
Noise level table
dB(A)
Capacity
Noise
Level
Fan
Speed
P20
P25
P32
High
36
36
40
Mid
29
29
29
Low
25
25
25
Note: In the case of bottom inlet, the operating noise is
louder than in the case of rear inlet.
mm (in.)
Drainage lines may be connected
on either the right or left side.
Perfect for use in hotels and other places
where line placement is a problem.
Note:
Cooling/heating capacity indicates the maximum value at operation under the following condition.
❇1 Cooling/heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor: 27˚C(80.6˚F)DB/19˚C(66.2˚F)WB, Outdoor: 35˚C(95˚F)DB
Heating Indoor: 20˚C(68˚F)DB, Outdoor: 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇2 Cooling capacity indicates the maximum value at operation under the following condition.
Cooling Indoor: 27˚C(80.6˚F)DB/19.5˚C(67.1˚F)WB, Outdoor: 35˚C(95˚F)DB
Heating Indoor: 21˚C(69.8˚F)DB, Outdoor: 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇3 The external static pressure is set to 100Pa (at 220V) /150Pa (at 230, 240V) at factory shipment.
❇4 The value are that at 240V.
❇5 It is measured in anechoic room.
Indoor unit
Page 51
Specifications
Page 52
Specifications
PEFY-P40VMH-E
Cooling capacity
Static Presure
100~200(260)Pa
Heating capacity
Increased design flexibility from sufficient external static pressure
allow authentic duct air- conditioning with an elegant interior layout.
❇1
❇1
❇2
❇2
❇1
❇1
❇1
Power consumption Cooling
Heating
(50/60Hz)
Cooling
Current
Heating
External finish
Dimension H ✕ W ✕ D
Net weight
Heat exchanger
Type
Fan
4.5
5.6
15,400
19,100
4.7
5.8
4,000
5,000
5.0
6.3
4,300
5,400
17,100
21,500
0.19 / 0.23
0.19 / 0.23
0.88 / 1.06
0.88 / 1.06
mm
in.
kg(lbs.)
380 ✕ 750 ✕ 900
15 ✕ 29-9/16 ✕ 35-7/16
44 (98)
45 (100)
m /min
L/s
cfm
Pa
Pa
Airflow rate
(Lo-Hi)
External static 220V
pressure ❇3 230,240V
Type
Motor
Output
❇4
kW
Air filter (option)
Gas
mm(in.)
(Brazing)
Refrigerant
pipe diameter Liquid
mm(in.)
(Brazing)
mm(in.)
Drain pipe diameter
dB(A)
220V
Noise level
(Lo-Hi)
❇5 230,240V dB(A)
One-side maintenance
Maximum external static pressure 200Pa
P40 P50 P63 P71 P80 P100 P125 P140 P200 P250
50/100/200
230/240V
100/150/200
380V
110/220
400/415V
130/260
All maintenance to the unit, including fan inspection and fan motor
removal, can be conducted from
the inspection opening on one
side.
Cooling capacity
Heating capacity
Noise level table (Standard static pressure 220V)
Drain up mechanism (option) ensures
up to 550mm (21-11/16in.) of lift
Noise
Level Fan
Speed
dB(A)
P40
P50
P63
P71
P80
High
34
34
38
39
41
42
42
42
Low
27
27
32
32
35
34
34
34
Net weight
Heat exchanger
Type
❇1
❇1
❇2
❇2
❇1
❇1
❇1
222
(8-3/4)
328
(12-15/16)
mm (in.)
kW
BTU/h
kW
kcal/h
kW
kcal/h
BTU/h
kW
kW
A
A
11.2
38,200
11.6
10,000
12.5
10,800
42,700
14.0
47,800
14.5
12,500
16.0
13,800
54,600
0.48 / 0.58
0.48 / 0.58
2.34 / 2.66
2.34 / 2.66
Galvanizing
380 ✕ 1,000 ✕ 900
15 ✕ 39-3/8 ✕ 35-7/16
50 (111)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan ✕ 1
18.0-25.0
15.5-22.0
13.5-19.0
300-417
258-367
225-317
636-883
547-777
477-671
10.0-14.0
167-233
353-494
0.08
Airflow rate
16.0
54,600
16.3
14,000
18.0
14,000
61,400
0.48 / 0.59
0.48 / 0.59
2.35 / 2.70
2.35 / 2.70
380 ✕ 1,200 ✕ 900
15 ✕ 47-1/4 ✕ 35-7/16
70 (155)
Sirocco fan ✕ 2
26.5-38.0
442-633
936-1342
50 / 100 /200
100 / 150 / 200
Single phase induction motor
0.18
0.14
0.12
28.0-40.0
467-667
989-1413
0.26
Synthethic fiber unwoven cloth filter (long life)
ø 12.7 (1/2)
ø 12.7 (1/2)
ø 6.35 (1/4)
ø 6.35(1/4)
27-34
31-37
ø15.88 (5/8)
ø15.88 (5/8)
ø9.52 (3/8)
O.D. 32 (1-1/4)
32-38
36-41
O.D. 32 (1-1/4)
34-42
38-44
35-41
38-43
32-39
35-41
PEFY-P250VMH-E
m /min
L/s
cfm
Pa
Pa
External static 380V
pressure ❇5 400,415V
Type
Motor
Output
❇6
kW
Air filter(option)
Gas
mm(in.)
(Brazing)
Refrigerant
pipe diameter Liquid
mm(in.)
(Brazing)
mm(in.)
Drain pipe diameter
dB(A)
380V
Noise level ❇7
400,415V dB(A)
28.0
95,500
29.1
25,000
31.5
27,100
107,500
1.23 / 1.41
1.23 / 1.41
2.0 / 2.3
2.0 / 2.3
22.4
76,400
23.3
20,000
25.0
21,500
85,300
0.99 / 1.14
0.99 / 1.14
1.62 / 1.86
1.62 / 1.86
Galvanizing
470 ✕ 1,250 ✕ 1,120
18-9/16 ✕ 49-1/4 ✕ 44-1/8
100 (221)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan ✕ 2
mm
in.
kg(lbs.)
3
Fan
P100 P125 P140
MAX.
550
(21-11/16)
PEFY-P100VMH-E PEFY-P125VMH-E PEFY-P140VMH-E
3N ~ 380-415V 50Hz / 60Hz
Power consumption Cooling
Heating
(50/60Hz)
Cooling
Current
Heating
External finish
The introduction of an upper drain mechanism allows the drain connection to be raised as high as 550mm(21-11/16in.), allowing more
freedom in piping layout design and reducing horizontal piping requirements.
Reduced noise thanks to the use of
newly designed centrifugal fan
PEFY-P71VMH-E PEFY-P80VMH-E
~ 220-240V 50Hz / 60Hz
9.0
8.0
30,700
27,300
9.3
8.3
8,000
7,100
10.0
9.0
8,600
7,700
34,100
30,700
0.32 / 0.40
0.26 / 0.33
0.32 / 0.40
0.26 / 0.33
1.47 / 1.83
1.20 / 1.51
1.47 / 1.83
1.20 / 1.51
PEFY-P200VMH-E
Dimension H ✕ W ✕ D
Capacity
7.1
24,200
7.3
6,300
8.0
6,900
27,300
0.24 / 0.30
0.24 / 0.30
1.12 / 1.38
1.12 / 1.38
Power source
The additional external static pressure capacity provides flexibility
for duct extension, branching and air outlet configuration.
External
static
pressure
(Pa)
PEFY-P63VMH-E
kW
BTU/h
kW
kcal/h
kW
kcal/h
BTU/h
kW
kW
A
A
3
220V
PEFY-P50VMH-E
Power source
72.0
1200
2543
58.0
967
2048
110 / 220
130 / 260
3-phase induction motor
1.08
0.76
Synthethic fiber unwoven cloth filter (long life)
ø22.2 (7/8)
ø19.05 (3/4)
ø9.52 (3/8)
O.D. 32 (1-1/4)
42 (110Pa) / 45 (220Pa)
44 (130Pa) / 47 (260Pa)
50 (110Pa) / 52 (220Pa)
52 (130Pa) / 54 (260Pa)
Note: Cooling/heating capacity indicates the maximum value at operation under the following condition.
❇1 Cooling Indoor: 27˚C(80.6˚F)DB/19˚C(66.2˚F)WB, Outdoor: 35˚C(95˚F)DB
Heating Indoor: 20˚C(68˚F)DB, Outdoor: 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇2 Cooling Indoor: 27˚C(80.6˚F)DB/19.5˚C(67.1˚F)WB, Outdoor: 35˚C(95˚F)DB
Heating Indoor: 21˚C(69.8˚F)DB, Outdoor: 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇3 The external static pressure is set to 100Pa (at 220V) /150Pa (at 230, 240V) at factory shipment.
❇4 The value are that at 240V.
❇5 The external static pressure is set to 220Pa (at 380V) /260Pa (at 400, 415V) at factory shipment.
❇6 The value are that at 415V.
❇7 It is measured in anechoic room.
❇4 The value are that at 240V.
❇5 The external static pressure is set to 220Pa (at 380V) /260Pa (at 400, 415V) at factory shipment.
❇6 The value are that at 415V.
❇7 It is measured in anechoic room.
Indoor unit
Page 53
Specifications
Page 54
INDOOR UNIT
Ceiling Suspended Type
Specifications
PCFY-P40VGM-E
Power source
kW
BTU/h
kW
kcal/h
kW
kcal/h
Heating capacity
BTU/h
kW
Cooling
Power
kW
consumption Heating
A
Cooling
Current
A
Heating
External finish(Munsel No.)
mm
Dimension H ✕ W ✕ D
in.
kg(lbs.)
Net weight
Heat exchanger
Type
3
❇3 m /min
Airflow rate
L/s
Fan
(Lo-Mid2-Mid1-Hi)
cfm
External staticpressure
Pa
Type
Motor
Output
kW
Air filter
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
mm(in.)
Drain pipe diameter
dB(A)
Noise level (Lo-Mid2-Mid1-Hi) ❇3 ❇4
Cooling capacity
Designed for ultra-quiet operation and easy maintenance,
provides exceptionally comfortable air-conditioning.
Extra slim, extra stylish
Seek and slim with stylishly curved lines, the PCFY series
blends right into any interior. It also features a single air outlet
which allows the auto vane to act as a shutter when the unit is
turned off.
Note:
Keeps airflow at optimum level
according to ceiling height
The most suitable airflow can be selected for ceilings up to 3.5m
high, enhancing air-conditioning efficiency and comfort.
Ceiling height
❇1
❇1
❇2
❇2
❇1
❇1
❇1
Standard
High ceiling
2.7(8-7/8)
3.5(11-1/2)
4.5
15,400
4.7
4,000
5.0
4,300
17,100
0.10
0.10
0.46
0.46
210 ✕ 1,000 ✕ 680
8-5/16 ✕ 39-3/8 ✕ 26-13/16
27 (60)
Sirocco fan ✕ 2
8-10-11-12
133-167-183-200
253-353-388-424
0.054
ø12.7 (1/2)
PCFY-P63VGM-E
PCFY-P100VGM-E
~ 220-240V 50Hz / ~ 220V 60Hz
11.2
7.1
38,200
24,200
11.6
7.3
10,000
6,300
12.5
8.0
10,800
6,900
42,700
27,300
0.16
0.13
0.16
0.13
0.73
0.60
0.73
0.60
0.70Y 8.59 / 0.97
270 ✕ 1,310 ✕ 680
210 ✕ 1,310 ✕ 680
10-11/16 ✕ 51-5/8 ✕ 26-13/16
8-5/16 ✕ 51-5/8 ✕ 26-13/16
37 (82)
34 (75)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan ✕ 3
18-20-23-25
12-14-16-18
300-333-383-417
200-233-267-300
636-706-812-883
424-494-565-636
0
Single phase induction motor
0.090
0.070
PP Honeycomb (long life)
ø15.88 (5/8)
PCFY-P125VGM-E
14.0
47,800
14.5
12,500
16.0
13,800
54,600
0.24
0.24
1.10
1.10
270 ✕ 1,620 ✕ 680
10-11/16 ✕ 63-13/16 ✕ 26-13/16
43 (95)
Sirocco fan54 ✕ 4
26-28-32-35
433-467-533-583
918-989-1130-1236
0.150
ø15.88 (5/8) / ø19.05 (3/4) (Compatible)
ø9.52 (3/8)
ø6.35 (1/4)
I.D. 26 (1) <VP-25>
29-33-36-38
32-34-37-39
36-38-41-43
37-39-42-44
❇1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor: 27˚C(80.6˚F)DB/19˚C(66.2˚F)WB,Outdoor 35˚C(95˚F)DB
Heating Indoor: 20˚C(68˚F)DB,Outdoor 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇2 Cooling capacity indicates the maximum value at operation under the following condition.
Cooling Indoor: 27˚C(80.6˚F)DB/19.5˚C(67.1˚F)WB,Outdoor 35˚C(95˚F)DB
Heating Indoor: 21˚C(69.8˚F)DB,Outdoor 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇3 airflw rate/noise level are shown in (low-middle 2-middle 1-high).
❇4 It is measured in anechoic room.
m (ft)
Greatly simplified installation
Auto vane distributes air evenly
The auto vane swings up and down automatically to distribute air
more evenly to every corner of the room.
Auto vane
Swing
The new direct suspension system eliminates the task of removing the attachment fixture from the main unit, greatly shortening
installation time.
Direct suspension with attachment fixture attached
1. Leave attachment fixture
attached to main unit.
2. Suspend the attachment
fixture from the suspension bolts.
3. Simply tighten the nuts
to secure the unit.
Ceiling surface
Suspension
bolts
Attachment
fixture
Air outlet
*A one-touch suspension is also available: simply suspend
the main unit from the attachment fitting after securing
the latter to the ceiling.
Drain piping can be connected in one of two
directions, to the left or the right of the unit
Indoor unit
Page 55
Specifications
Page 56
INDOOR UNIT
Wall Mounted Type
Specifications
PKFY-P20VAM-E
PKFY-P VAM
❇1
❇1
❇2
❇2
❇1
❇1
❇1
kW
BTU/h
Cooling capacity
kW
kcal/h
kW
kcal/h
Heating capacity
BTU/h
kW
Cooling
Power
kW
consumption Heating
A
Cooling
Current
A
Heating
External finish(Munsel No.)
Dimension H ✕ W ✕ D mm(in.)
kg(lbs.)
Net weight
Heat exchanger
Type
3
❇3 m /min
Airflow rate
L/s
Fan
(Lo-Hi)
cfm
External staticpressure
Pa
Type
Motor
Output
kW
Air filter
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
mm(in.)
Drain pipe diameter
dB(A)
Noise level (Lo-Mid2-Mid1-Hi) ❇3 ❇4
PKFY-P VFM
Elegant Design and Compact Dimensions Ideal for Offices,
Stores and Residential Uses.
Note:
Capacity range
Capacity P20 P25 P32 P40 P50 P63 P100
PKFY-P25VAM-E
Power source
PKFY-P VGM
PKFY-P32VGM-E
~ 220-240V 50Hz ~ 220V 60Hz
3.6
12,300
3.7
3,150
4.0
3,400
13,600
PKFY-P40VGM-E
PKFY-P50VGM-E
4.5
15,400
4.7
4,000
5.0
4,300
17,100
0.07
0.04
0.07
0.04
0.32
0.20
0.32
0.20
Plastic <PS,ABS> white 0.70Y 8.59/0.97
Plastic 2.60Y 8.66/0.69
340 ✕ 990 ✕ 235 (13-7/16 ✕ 39 ✕ 6-5/16)
295 ✕ 815 ✕ 158 (11-5/8 ✕ 32-1/8 ✕ 6-1/4)
16 (36)
8.5 (19)
Cross fin (Aluminum plate fin and copper tube)
Line flow fan ✕ 1
2.8
9,600
2.9
2,500
3.2
2,800
10,900
2.2
7,500
2.3
2,000
2.5
2,200
8,500
9-10-11-12
150-167-183-200
318-353-388-424
8-9.5-10.5-11.5
133-158-175-192
283-335-371-406
4.9-5.2-5.6-5.9
82-87-93-98
173-184-198-208
5.6
19,100
5.8
5,000
6.3
5,400
21,500
0
Single phase induction motor
0.030
0.017
PP Honeycomb (long life)
ø 12.7 (1/2) / ø 15.88 (5/8)
(Compatible)
ø 6.35 (1/4) / ø 9.52 (3/8)
(Compatible)
ø12.7 (1/2)
ø6.35 (1/4)
I.D. 20 (3/4) <VP-20>
I.D.16 (5/8) <VP-16>
32-33-35-36
34-37-40-43
33-36-38-41
❇1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor: 27˚C(80.6˚F)DB/19˚C(66.2˚F)WB,Outdoor 35˚C(95˚F)DB
Heating Indoor: 20˚C(68˚F)DB,Outdoor 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇2 Cooling capacity indicates the maximum value at operation under the following condition.
Cooling Indoor: 27˚C(80.6˚F)DB/19.5˚C(67.1˚F)WB,Outdoor 35˚C(95˚F)DB
Heating Indoor: 21˚C(69.8˚F)DB,Outdoor 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇3 Airflow rate/noise level are in (low-middle2-middle1-high).
❇4 It is measured in anechoic room.
Quiet operation (PKFY-P VGM)
VAM
Among the quietest in the industry
VGM
VFM
Compact design with 990mm(39in.) width
(PKFY-P VGM)
Width reduced by 20% to a compact
990mm(39in.).
Extra compactness has been achieved
thanks to a 20%(260mm(10-1/4in.))
reduction in which compared with previous models.
Compact 295mm(11-5/8in.)
high body fits snugly in even limited
spaces (PKFY-P VAM)
Lightweight 8.5kg(20lbs) unit easy to
transport and install (PKFY-P VAM)
Auto-flap shutter enhances
good looks
Indoor unit
Page 57
PKFY-P63VFM-E
Airflow passage configuration that assures quiet operations
1. The unit incorporates a random pitch cyclic fan. By changing fan intervals reduction in airflow. Optimal design of the
airflow passage gives a shorted fan diameter and allows a
highly compact installation.
2. Thanks to a highly practical casing configuration, airflow
generated by the fan is distributed uniformly.
3. Due to careful positioning of the vertical vane axis, air is
blown evenly from the fan. This prevents mixing with secondary air, and also suppresses condensation.
1
2
3
Front grille opens out - easy filter cleaning (PKFY-P VGM)
In room air conditioning style, the grille
opens out allowing the filter to be removed. The filter and open grille can
therefore be thoroughly and easily
cleaned.
Front grille
opens out
Front power supply box for easier
wiring even after installation
5-way piping provides more flexibility
in selecting installation sites
The front power supply box allows electrical wiring work to be done after the indoor unit has been installed. For easier
installation, all the screws required for securing the indoor unit to the wall are accessible from the front of the unit.
All piping including drainage can be connected from the rear, right, base, and left
of the unit, providing much greater flexibility out piping and selecting installation
site.
❇1
❇1
❇2
❇1
❇1
kW
BTU/h
kcal/h
kW
Heating capacity
BTU/h
kW
Cooling
Power
kW
consumption Heating
A
Cooling
Current
A
Heating
External finish(Munsel No.)
Height mm(in.)
mm(in.)
Width
Dimension
mm(in.)
Depth
kg(lbs.)
Net weight
Heat exchanger
Type
Airflow rate ❇3
3
m /min
Fan
(Lo-Hi)
External staticpressure
Pa
Type
Motor
Output
kW
Air filter
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
mm(in.)
Drain pipe diameter
dB(A)
Noise level (Lo-Hi) ❇3 ❇4
Cooling capacity
Note:
PKFY-P100VFM-E
220-230-240V 50Hz / 220V 60Hz
Power source
11.2
38,200
10,000
12.5
42,700
0.14
0.14
0.64
0.64
7.1
24,200
6,300
8.0
27,300
0.12
0.12
0.55
0.55
Plastic, white : <3.4Y7.7/0.8>
340 (13-3/8)
1,680 (66-1/8)
235 (9-1/4)
28 (62)
340 (13-3/8)
1,400 (55-1/8)
235 (9-1/4)
24 (53)
Cross fin (Aluminum plate fin and copper tube)
Line flow fan ✕ 2
22-28
15-20
0
Single phase induction motor
0.070
0.040
PP Honeycomb (antibacterial)
ø15.88 (5/8) / ø19.05 (3/4)
ø15.88 (5/8)
ø9.52 (3/8)
I.D. 20 (3/4) <VP-20>
39-45
41-46
1. Cooling/heating capacity indicates the maximum value at operation under the following condition
❇1 Cooling Indoor: 27˚C(80.6˚F)DB/19˚C(66.2˚F)WB, Outdoor: 35˚C(95˚F)DB
Heating Indoor: 20˚C(68˚F)DB, Outdoor: 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇2 Cooling Indoor: 27˚C(80.6˚F)DB/19.5˚C(67.1˚F)WB, Outdoor: 35˚C(95˚F)DB
❇3 Airflow rate/noise level are in (low-high).
❇4 It is measured in anechoic room.
Specifications
Page 58
INDOOR UNIT
Floor standing type
Specifications
PFFY-P VLEM-E
PFFY-P20VLEM-E
PFFY-P25VLEM-E
2.2
7,500
2.3
2,000
2.5
2,200
8,500
2.8
9,600
2.9
2,500
3.2
2,800
10,900
Power source
kW
BTU/h
kW
kcal/h
kW
kcal/h
Heating capacity
BTU/h
kW
Cooling
Power
kW
consumption Heating
A
Cooling
Current
A
Heating
External finish(Munsel No.)
mm
Dimension H ✕ W ✕ D
in.
kg(lbs.)
Net weight
Heat exchanger
Type
3
❇3 m /min
Airflow rate
L/s
Fan
(Lo-Mid2-Mid1-Hi)
cfm
External staticpressure
Pa
Type
Motor
Output
kW
Air filter
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
mm(in.)
Drain pipe diameter
dB(A)
Noise level (Low-High) ❇3 ❇4 ❇5
Cooling capacity
Floor mounted lowboy type effective in perimeter zone.
Standardized design with mild lines.
Supports various types of spaces from
office buildings and shop buildings to
hospitals.
Water vapor permeable film humidifier
can be installed.
Remote control can be installed onto
the main unit.
Compact unit for easy air
conditioning in perimeter zone.
The compact body of 220mm(8-11/16in.)
in depth can be easily installed in the
perimeter zone for effective air conditioning in the perimeter zone.
Electronics dry function
dehumidify refreshingly.
Optimum dehumidification depending on
indoor temperature to prevent over-cooling. Refreshing dehumidification can be
attained.
❇1
❇1
❇2
❇2
❇1
❇1
❇1
0.04 / 0.06
0.04 / 0.06
0.19 / 0.25
0.19 / 0.25
630 ✕ 1,050 ✕ 220
24-13/16 ✕ 41-3/8 ✕ 8-11/16
23 (51)
Sirocco fan ✕ 1
5.5-6.5
92-108
194-230
0.015
INDOOR UNIT
Floor mounted concealed type
PFFY-P VLRM-E
Neatly installed with pericover concealed.
Easy installation in perimeter zone.
Compact unit for easy air conditioning in perimeter zone.
The body is concealed in the pericover to pursue harmony with the interior.
The compact body of 220mm(8-11/16in.) in depth can be easily installed in the perimeter
zone.
kW
BTU/h
kW
kcal/h
kW
kcal/h
Heating capacity
BTU/h
kW
Cooling
Power
kW
consumption Heating
A
Cooling
Current
A
Heating
External finish(Munsel No.)
mm
Dimension H ✕ W ✕ D
in.
kg(lbs.)
Net weight
Heat exchanger
Type
3
❇3 m /min
Airflow rate
L/s
Fan
(Lo-Mid2-Mid1-Hi)
cfm
External staticpressure
Pa
Type
Motor
Output
kW
Air filter
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
mm(in.)
Drain pipe diameter
dB(A)
Noise level (Low-High) ❇3 ❇4 ❇5
Note:
Electronics dry function dehumidify refreshingly to prevent over-cooling.
Optimum dehumidification depending on indoor temperature to prevent over-cooling. Refreshing dehumidification can be attained.
Indoor unit
Page 59
❇1
❇1
❇2
❇2
❇1
❇1
❇1
ø12.7 (1/2)
ø12.7 (1/2)
ø15.88 (5/8)
ø6.35 (1/4)
ø6.35 (1/4)
ø9.52 (3/8)
I.D.26 (1) <Accessary hose O.D.27 (top end :O.D.20)>
35-40
38-43
34-40
PFFY-P20VLRM-E
PFFY-P25VLRM-E
2.2
7,500
2.3
2,000
2.5
2,200
8,500
2.8
9,600
2.9
2,500
3.2
2,800
10,900
Power source
Cooling capacity
0.04 / 0.06
0.04 / 0.06
0.19 / 0.25
0.19 / 0.25
639 ✕ 886 ✕ 220
25-3/16 ✕ 34-15/16 ✕ 8-11/16
18.5 (41)
Sirocco fan ✕ 1
5.5-6.5
92-108
194-230
0.015
34-40
PFFY-P63VLEM-E
PFFY-P50VLEM-E
PFFY-P40VLEM-E
PFFY-P32VLEM-E
~ 220-240V 50Hz / ~ 208-230V 60Hz
7.1
5.6
4.5
3.6
24,200
19,100
15,400
12,300
7.3
5.8
4.7
3.7
6,300
5,000
4,000
3,150
8.0
6.3
5.0
4.0
6,900
5,400
4,300
3,400
27,300
21,500
17,100
13,600
0.1 / 0.11
0.085 / 0.09
0.065 / 0.075
0.06 / 0.07
0.1 / 0.11
0.085 / 0.09
0.065 / 0.075
0.06 / 0.07
0.46 / 0.47
0.40 / 0.41
0.32 / 0.33
0.29 / 0.30
0.46 / 0.47
0.40 / 0.41
0.32 / 0.33
0.29 / 0.30
Acrylic paint (5Y 8/1)
630 ✕ 1,170 ✕ 220
630 ✕ 1,410 ✕ 220
24-13/16 ✕ 46-1/8 ✕ 8-11/16
24-13/16 ✕ 55-9/16 ✕ 8-11/16
32 (71)
30 (67)
26 (58)
25 (56)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan ✕ 2
12.0-15.5
12.0-14.0
9.0-11.0
7.0-9.0
200-258
200-233
150-183
117-150
424-547
424-494
318-388
247-318
0
Single phase induction motor
0.063
0.035
0.030
0.018
PP Honeycomb fabric (washable)
40-46
PFFY-P63VLRM-E
PFFY-P50VLRM-E
PFFY-P40VLRM-E
PFFY-P32VLRM-E
~ 220-240V 50Hz / ~ 208-230V 60Hz
7.1
5.6
4.5
3.6
24,200
19,100
15,400
12,300
7.3
5.8
4.7
3.7
6,300
5,000
4,000
3,150
8.0
6.3
5.0
4.0
6,900
5,400
4,300
3,400
27,300
21,500
17,100
13,600
0.1 / 0.11
0.085 / 0.09
0.065 / 0.075
0.06 / 0.07
0.1 / 0.11
0.085 / 0.09
0.065 / 0.075
0.06 / 0.07
0.46 / 0.47
0.40 / 0.41
0.32 / 0.33
0.29 / 0.30
0.46 / 0.47
0.40 / 0.41
0.32 / 0.33
0.29 / 0.30
Galvanizing
639 ✕ 1,006 ✕ 220
639 ✕ 1,246 ✕ 220
25-3/16 ✕ 39-5/8 ✕ 8-11/16
25-3/16 ✕ 49-1/16 ✕ 8-11/16
27 (60)
25 (56)
21 (47)
20 (45)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan ✕ 2
12.0-15.5
12.0-14.0
9.0-11.0
7.0-9.0
200-258
200-233
150-183
117-150
424-547
424-494
318-388
247-318
0
Single phase induction motor
0.063
0.035
0.030
0.018
PP Honeycomb fabric (washable)
ø12.7 (1/2)
ø12.7 (1/2)
ø15.88 (5/8)
ø6.35 (1/4)
ø6.35 (1/4)
ø9.52 (3/8)
I.D.26 (1) <Accessary hose O.D.27 (top end :O.D.20)>
35-40
38-43
40-46
❇1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor: 27˚C(80.6˚F)DB/19˚C(66.2˚F)WB,Outdoor 35˚C(95˚F)DB
Heating Indoor: 20˚C(68˚F)DB,Outdoor 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇2 Cooling capacity indicates the maximum value at operation under the following condition.
Cooling Indoor: 27˚C(80.6˚F)DB/19.5˚C(67.1˚F)WB,Outdoor 35˚C(95˚F)DB
Heating Indoor: 21˚C(69.8˚F)DB,Outdoor 7˚C(44.6˚F)DB/6˚C(42.8˚F)WB
❇3 Air flow rate/noise level are in (Low-High)
❇4 Measured point : 1m51m, Power supply : AC240V/50Hz
·1dB(A) lower at AC230V/50Hz
·2dB(A) lower at AC220V/50Hz
·3dB(A) lower at 1.5m51.5m point
❇5 It is measured in anechoic room.
Specifications
Page 60
INDOOR UNIT
Fresh Air Intake Type
Specifications
PEFY-P80VMH-E-F
❇1
❇1
❇1
Heating capacity
❇1
Cooling
Power
consumption Heating
Cooling
Current
Heating
External finish
Height
Width
Dimension
Depth
Net weight
Heat exchanger
Type
Cooling capacity
Fresh
Air Intake
Fresh Air can be taken in with temperature control.
Ideal for Offices, Stores and Restaurant.
mm(in.)
mm(in.)
mm(in.)
kg(lbs.)
Motor
External
static
pressure
(Low/Mid/High)
Type
Output
208V
220V
230V
240V
16.0
54,600
15.1
51,500
0.29 / 0.33
0.29 / 0.33
1.24 / 1.48
1.24 / 1.48
9.0
30,700
8.5
29,000
0.16 / 0.21
0.16 / 0.21
0.67 / 0.91
0.67 / 0.91
kW
BTU/h
kW
BTU/h
kW
kW
A
A
Galvanizing
380 (15)
1200 (47-1/4)
1000 (39-3/8)
900 (35-7/16)
70 (155)
50 (111)
Cross fin (Aluminum plate fin and copper tube)
m /min
L/s
cfm
Pa
Pa
Pa
Pa
Sirocco fan ✕ 1
9.0
150
18
35 / 85 / 170
40 / 115 / 190
50 / 130 / 210
80 / 170 / 220
kW
0.09
3
Airflow rate
Fan
PEFY-P140VMH-E-F
~ 220-240V 50Hz / ~ 208-230V 60Hz
Power source
Sirocco fan ✕ 2
18.0
300
636
35 / 85 / 170
50 / 115 / 190
60 / 130 / 220
100 / 170 / 240
Single phase induction motor
0.14
Synthetic fiber unwoven cloth filter (long life)
Air filter
Gas
mm(in.)
(Flare)
Liquid
mm(in.)
(Flare)
mm(in.)
Drain pipe diameter
208, 220V dB(A)
Noise level ❇2
230, 240V dB(A)
ø15.88 (5/8)
ø15.88 (5/8)
Refrigerant
pipe diameter
ø9.52 (3/8)
O.D.32 (1-1/4)
28 / 38 / 43
34 / 43 / 45
27 / 38 / 43
33 / 43 / 45
PEFY-P200VMH-E-F
The Fresh Air intake indoor unit
can be installed in any place.
Max. 110% of outdoor unit capacity, excepting heating at outdoor temperature of less than -5˚C(23˚F) (100%).
Cooling capacity
Heating capacity
The Fresh Air intake indoor unit can take
fresh outdoor air into any building in any
place at any time.
Example
1. Nursery home
Office, Lobby, Workshop,
Rest room, Nursery home,
Smoking corner,
Kitchen in restaurant
Fresh Air intake
indoor unit
2. Workshop
Fresh Air intake
indoor unit
Passage
Exhaust
air
Fresh air
Air flow
Private room
Polluted air
Office
Cooling
Power
consumption Heating
Cooling
Current
Heating
External finish
Height
Width
Dimension
Depth
Net weight
Heat exchanger
Type
Airflow rate
Workshop
Installing fresh Air intake indoor unit (Image)
Ventilating fan
Ventilating fan
Fresh Air intake indoor unit
Exhaust
air
EA
Supply air
Fresh
air
OA
< Note>
Fan remains in operation during Thermo-OFF. Using this model with other type of indoor
unit is recommended for Cold Draft prevention because Cold Draft might occur by using
only this model that takes in fresh air.
Fan
28.0
95,500
26.5
90,400
0.39 / 0.50
0.39 / 0.50
0.68 / 0.86
0.68 / 0.86
22.4
76,400
21.2
72,300
0.34 / 0.42
0.34 / 0.42
0.58 / 0.74
0.58 / 0.74
kW
BTU/h
kW
BTU/h
kW
kW
A
A
Galvanized
470 (18-9/16)
1250 (49-1/4)
1120 (44-1/8)
100 (221)
Cross fin
Sirocco fan ✕ 2
mm(in.)
mm(in.)
mm(in.)
kg(lbs.)
3
Private room
PEFY-P250 VMH-E-F
3N~ 380-415V 50Hz / 60Hz
Power source
* Limits of capacity connectable to outdoor unit
35
583
1236
110 / 190
120 / 200
130 / 210
28
467
989
140 / 200
150 / 210
160 / 220
m /min
L/s
cfm
Pa
Pa
Pa
External 380V
400V
static
pressure 415V
Type
Motor
Output
kW
Air filter (option)
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
mm(in.)
Drain pipe diameter
380V
dB(A)
400V
dB(A)
Noise level ❇2
415V
dB(A)
3-phase induction motor
0.23
0.20
Synthetic fiber unmoven cloth filter (long life type)
ø22.2 (7/8)
ø19.05 (3/4)
ø9.52 (3/8)
ø9.52 (3/8)
O.D.32 (1-1/4)
39 / 42
40 / 43
40 / 44
40 / 44
40 / 45
41 / 465
Note:
1. The cooling amd heating capacites are the maximum capacites that were obitained by operating in the above air conditions and with a refrigerant pipe of about 7.5m.
2 .The actual capacity characteristics vary with the combination of indoor and outdoor units. See the technical infomation.
3 .The operating noise is the data that was obitained by measuring it 1.5m from the the bottom of the unit in an anechoic room. (Noise meter A-scale value)
4 .The figure of Electrical characteristic , indicates at 220 Pa setting at 415V.
5 . When the 100% fresh air indoor units are connected, the maximum connectable indoor units to 1 outdoor unit are as follows
Heat pump models
Cooling only
110%(100% in case of heating below-5˚C(23˚F))
110%
6. Operational temp range is
21˚C(69.8˚F)DB/15.5˚C(59.9˚F)WB to 43˚C(109.4˚F)DB/35˚C(95˚F)WB
( Cooling:from
)
Heating: from -10˚C(14˚F)DB to 20˚C(68˚F)DB
❇ Thermo off(Fan) operation automatically starts either when temperature is lower than 21˚C(69.8˚F)DB in cooling mode or when the temperature exceeds 20˚C(68˚F)DB in heating mode.
7. As the room temp in sensed by the thermo in the remote controller or the one in the room, be sure to use either remote controller or room thermo.
8. Autochangeover function or Dry mode is NOT available. Fan mode operation during the thermo off in Cooling/Heating mode.
9. In any case, the air flow rate should be kept lower than 110% of the above chart. Please see "Fan curves" for the details.
10. When this nit is used as sole A/C system, be careful about the dew in air outlet grilles in cooling mode.
11. Un-conditioned outdoor air such as humid air or cold air blows to the indoor during thermo off operation.
Please be careful when positioning indoor unit air outlet grilles, ie take the necessary precautions for cold air, and also insulate rooms for dew condensation prevention as required.
12. Air filter must be installed in the air intake side. The filter should be attached where easy maintenance in possible in case of usage of fild supply filters.
Indoor unit
Page 61
Specifications
Page 62
The Ventilation System for Enhanced Air Quality - Lossnay
LOSSNAY Technology
Combine with Lossnay Ventilation System Enhanced Air Quality.
Unified Control System Allows Greater Design Freedom.
• Two paths ventilation
LOSSNAY simultaneously intakes Fresh Air and exhausts Dirty Air.
• Total energy recover
LOSSNAY returns BOTH sensible heat and latent heat.
0ûC (32 )
5.2ûC (41.3 )
A. Two paths ventilation
B. Total Energy transfer
ûF
Stale hot air (exhaust)
EA
Outdoors
Stale air exhaust
(dirty indoor air)
ûF
Indoors
SA
Fresh air exhaust
(fresh heating/cooling air)
Fresh cool air(outdoor)
Partition plate
Spacer plate
OA
RA
Stale air induction
(dirty heating/cooling air)
Fresh air induction
(fresh air)
20ûC (68 )
Sensible heat
ûF
14.8ûC (58.6 )
ûF
Fresh warm air (indoor supply air)
LGH-15RX4
LGH-25RX4
LGH-35RX4
LGH-50RX4
[150m3/h Single phase 220-240V 50Hz/60Hz]
[250m3/h Single phase 220-240V 50Hz/60Hz]
[350m3/h Single phase 220-240V 50Hz/60Hz]
[500m3/h Single phase 220-240V 50Hz/60Hz]
LGH-80RX4
LGH-100RX4
LGH-150RX4
LGH-200RX4
• Hyper Performance [HYPER CORE]
Mitsubishi developed “ HYPER CORE “ of World No.1
No dirty air return
High Performance
LOSSNAY recovers energy but does NOT return dirty
air to indoor by Non porous paper.
Mitsubishi has World No.1 Energy exchange efficiency.
[800m3/h Single phase 220-240V 50Hz/60Hz]
[1000m3/h Single phase 220-240V 50Hz/60Hz]
[1500m3/h Single phase 220-240V 50Hz/60Hz]
[2000m3/h Single phase 220-240V 50Hz/60Hz]
25µm
Water molecule
Gas (CO2) molecule
Exhaust airflow
Heat-Exchange Efficiency Obtainable Only with Lossnay.
The secret to the unmatched comfort provided Lossnay core is the cross-flow, plate-fin structure off the heat-exchange
unit. A diaphragm made of a specially processed paper fully separates inducted and exhausted air supplies, ensuring
that only fresh air is introduced to the indoor environment.
The superior heat-transfer and moisture permeability of the special paper assure highly effective total heat exchange
(temperature and humidity) when inducted? and exhausted air supplies cross in the Lossnay core.
Indoor unit
Page 63
Enthalpy exchange efficiency (for cooling)
Stale warm air (indoor air)
Latent heat
70%
RX4
68
67
64.5
60%
67
65
64.5 64.5
65.5
62.5
68
67
64.5
64.5
64.5
64.5
Conventional models
62.5
61.5
UP
by 3 to 4
point
15RX4 25RX4 35RX4 50RX4 65RX4 80RX4 100RX4 150RX4 200RX4
Supply airflow
Non-porous ultra-thin film
material: 25µm
LOSSNAY
Page 64
RX4 SERIES
Why LOSSNAY is necessary?
LOSSNAY features
Multi Ventilation Mode for control air volume balance
• Without ventilation...
Lack of Ventilation makes people sick by dirty indoor air including CO2, Dust, Bacteria.
• If just open windows...
Normal office,
etc.
Opening windows eliminates dirty air BUT wastes much air-con energy.
Smaller offices or tenant buildings,
etc.
Smoking areas,
etc.
• So we recommend LOSSNAY
LOSSNAY is simultaneous pursuit of Ventilation and Energy Saving.
Many people in an office
Ventilation
Extractor fan working place
Priority air exhaust
Energy Save
Power air supply/exhaust
Power air supply
Power air exhaust
All LGH models feature the "Multi-ventilation Mode," which allows the air supply/exhaust balance to be varied dynamically to suit the usage environment and location. Modes can be selected easily by setting the connectors on the circuit
board.
• This is LOSSNAY !
ADVANTAGES
Clean air supply, dirty air exhaust by Two air paths (OA SA and RA EA)
Energy recovery by LOSSNAY Core
Free cooling by bypass damper
MULTI VENTILATION MODE for multi ventilation request (Power supply, Power supply/exhaust, Power exhaust)
UNIT STRUCTURE
Exhaust
Airflow
High
Low
High
Low
Supply
Airflow
High
High
Low
Low
Ventilation Mode
Power air supply/exhaust mode
Power air supply mode
Power air exhaust mode
Energy-saving ventilation mode
* "High" can be further set to "Extra high" using the dip switch.
Energy Recovery Image
EA (exhaust air)
Easy Installation
Flexible duct work is available.
LOSSNAY Core
OA (outside air)
Bypass damper
Air conditioner
Standard installation
Installation
A space is necessary
to prevent the influx
of rainwater.
Can be installed close
to the surface of the
wall.
15.4˚C
Thermal
energy
RA (returt air)
EA
Outdoor:0˚C Indoor:20˚C
OA
EA
OA
Changing the duct direction
SA (supply air)
How much recover?
OA temp. : 0˚C
SA temp. : 15.4˚C
(Indoor 20˚C)
Collar
Aperture Plate
Indoor unit
Page 65
Exchangeable
LOSSNAY
Page 66
Model line up
Appearance
M-NET system with City Multi
Flexible system, for your multi demand
Centralized controller
Outdoor unit
UP
Power supply unit
Indoor unit
PAR-F27MEA
LGH-50RX4-E
Indoor unit
PAR-F27MEA
LGH-200RX4-E
Installation
LOSSNAY ventilation combined with Air-con
Specification
Model: LGH-RX4 series
Model
Power source
Size
Volume
Weight
Duct diameter [mm]
Air Volume
Static Pressure
Sound level A
Sound level B
Ex. Effciency
Indoor unit
Page 67
L mm
W mm
H mm
3
m
kg
Shi
Shi
Shi
Shi
Temp.
Heatin
Cooling
CMH
Pa
dB
dB
%
%
%
15R
25R
35R
780
610
275
0.13
17
100
150
95
26
33
77
70
65.5
780
735
275
0.16
21
150
250
80
26.5
34.5
78
70
65
888
874
317
0.25
30
150
350
150
31
39
79
70
68
50R
65R
80R
200/240V 1Ph 50/60Hz
1016
954
1164
888
908
1004
317
388
398
0.29
0.34
0.47
33
46
61
200
250
250
500
650
800
150
110
140
33
34.5
33.5
41
42.5
44.5
77
77
78
67.5
67.5
71
64.5
64.5
67
100R
150R
200R
1263
1164
398
0.59
69
250
1000
160
36
47
79
71
67
1413
1004
800
1.13
138
350
1500
140
36.5
49
79
72
68
1413
1231
800
1.39
161
350
2000
150
39
51.5
79
71
67
LOSSNAY
Page 68
OA Processing
Units
RDH3 SERIES
OUTDOOR AIR PROCESSING UNIT GUF type
Ideal Indoor-Air Quality — For Your Comfort and Health
General
The OA (outdoor-air) Processing Unit creates an optimum indoor-air environment at an unparalleled rate of cost
efficiency providing substantial energy savings. Forced air ventilating and humidifying functions unique to this system
keep indoor-air fresh and free of contaminants preventing “sick building syndrome” and the spread of airborne viruses
such as the flu. Another novel feature of the OA Processing Unit is the “Lossnay core,” a heat-exchange unit that
functions to transfer heat efficiently, cutting ventilation load by as much as 70%. This special combination of functionality
and performance designed to ensure users ample comfort and year-round health cannot be found anywhere else on the
market.
GUF - For the finest indoor quality
GUF = [ LOSSNAY ] + [ HEATING & COOLING ]
Lossnay (Energy Recover)
DX Coil(Heating & Cooling)
GUF model image
OA (Outdoor air)
Fresh, outdoor-air in a quantity
required for ventilation is drawn
in by the supply fan.
EA (Exhaust air)
Heat from the indoor air (both sensible
and latent) is recovered by the Lossnay
Core and vented outside by the
exhaust fan.
Specification
The exhaust fan
High efficiency filters (Option)
The supply fan
RA (Return air)
The exhaust
fan draws in
contaminated
indoor-air.
Heat recovery unit
(Lossnay Core)
Temperature and humidity are
exchanged between the supply
air and the exhaust air.
Maintenance cover
Air filter
Prevents clogs in
the Lossnay Core.
DX Heat exchanger
Cools or heats the drawn
in outdoor-air.
SA (Supply air)
The processed, fresh
outdoor-air is vented
to the indoor rooms.
GUF-50RD(H)3 *1
Cooling Capacity
5.29 (DX coil:3.63, Lossnay:1.66)KW
Heating capacity
6.42 (DX coil:4.17, Lossnay:2.25)KW
500m3/h Single phase 220-240V 50Hz
GUF-100RD(H)3 *1
Cooling Capacity
10.81 (DX coil:7.32, Lossnay3.49)KW
Heating capacity
13.00 (DX coil:8.30, Lossnay:4.70)KW
1000m3/h Single phase 220-240V 50Hz
*1 H : Humidifying Type
New Permeable Film Humidifier (RDH3 model)
Comfortable Level of Humidity for Exceptionable
Air Quality
The OA Processing Unit is equipped with a new permeable film humidifier
developed and patented by Mitsubishi Electric. Steam transmission efficiency
has been improved remarkably by lowering the resistance of the material. The
use of a 3-layer film that allows only the transfer of steam prevents the
production of white powder, so there is no need for the use of a water purifier.
Highly Efficient Humidification
Improvements in the system of airflow patterns and water injection techniques
have resulted in a substantial increase in humidifying volume.
Outdoor
air
Ultra-water
repellant
cell-based
water-vapor
transmission
filter
Humidified air
Water
Ultra-water
repellant
cell-based
water-vapor
transmission
filter
Spacer
3-dimensional
cloth
Steam
New filter
Page 69
GUF-50RDH3
Power source
Cooling capacity
Figure in < > is the recovery
capacity by LOSSNAY core.
Power input
Current input
Heating capacity
Figure in < > is the recovery
capacity by LOSSNAY core.
Power input
Current input
Capacity equivalent to indoor unit
Humidifying capacity
❇1
❇1
❇1
❇2
kW
kcal / h
Btu / h
kcal / h
kW
A
❇3 kW
❇3 kcal / h
❇3 Btu / h
kW
A
Humidifier
External finish
External dimension H ✕ W ✕ D
Water
Indoor unit
Model
Net weight
Heat
exchanger
FAN
kg / h
lb / h
mm
in.
kg (lb)
Noise level (Low-High)
(measured in anechoic room)
Insulation material
Air filter
Supplying air
Exhausting air
Protection device
Refrigerant control device
Diameter of
Liquid
refrigerant pipe Gas
Diameter of drain pipe
GUF-50RD3
1-phase 220-240V 50Hz, 1-phase 220V 60Hz
5.46
<1.83>
<3.85>
11.17
5.46
<1.83>
4,700
<1,600>
<3,300>
9,600
4,700
<1,600>
18,600
<6,200>
<13,100>
38,100
18,600
<6,200>
4,500
<1,400>
<3,000>
9,300
4,500
<1,400>
235-265
235-265
480-505
1.15
1.15
2.20
6.18
<2.01>
<4.20>
12.50
6.18
<2.01>
5,300
<1,700>
<3,600>
10,800
5,300
<1,700>
21,100
<6,900>
<14,300>
42,700
21,100
<6,900>
235-265
235-265
480-505
1.15
1.15
2.20
P32
P32
P63
2.7
5.4
6.0
12.0
Permeable film humidifier
-
GUF-100RD3
11.17
<3.85>
9,600
<3,300>
38,100
<13,100>
9,300
<3,000>
480-505
2.20
12.50
<4.20>
10,800
<3,600>
42,700
<14,300>
480-505
2.20
P63
-
Galvanized, with grey insulation sheet
398 ✕ 1,231 ✕ 1,580
317 ✕ 1,016 ✕ 1,288
398 ✕ 1,231 ✕ 1,580
15-11/16 ✕ 48-1/2 ✕ 62-1/4 12-1/2 ✕ 40 ✕ 50-3/4 15-11/16 ✕ 48-1/2 ✕ 62-1/4
92 (203)
54 (120)
98 (217)
Partition, Cross-flow structure, Special preserved paper-plate.
Cross fin (Aluminum fin and copper tube)
SA: Centrifugal fan (Sirocco fan) ✕ 1
EA: Centrifugal fan (Sirocco fan) ✕ 1
140
140
135
14.3
14.3
13.8
317 ✕ 1,016 ✕ 1,288
12-1/2 ✕ 40 ✕ 50-3/4
57 (126)
LOSSNAY core
Refrigerant coil
Type ✕ Quantity
External
static press.
Motor type
Motor output
Driving mechanism
Airflow rate
(High value)
GUF-100RDH3
Pa
mmH2O
125
12.7
kW
Totally enclosed capacitor permanent split-phase induction motor, 4 poles, 2units
-
m3 / min
L/s
cfm
500
139
294
dB <A>
33.5-34.5
Direct-driven by motor
500
1,000
139
139
294
589
38-39
33.5-34.5
1,000
139
589
38-39
Polyester sheet
Non-woven fabrics filter (Gravitational method 82%) & Optional part: High efficiency filter (Colorimetric method 65%)
Non-woven fabrics filter (Gravitational method 82%)
Fuse
LEV
mm (in.)
ø9.52 (ø3/8) Flare
ø6.35 (ø1/4) Flare
ø6.35 (ø1/4) Flare
ø9.52 (ø3/8) Flare
mm (in.) ø12.7 (ø1/2) Flare
ø15.88 (ø5/8) Flare
ø12.7 (ø1/2) Flare
ø15.88 (ø5/8) Flare
mm (in.)
VP25
OA Processing Units
Page 70
Wide selection of outdoor units
S Series (4HP-6HP)
Page73
Y Series (26HP-32HP)
PUHY-P TSHM-A
PUMY-P VHM
Model
4HP
5HP
6HP
Model
30HP
32HP
Model Name
PUMY-P100VHM
PUMY-P125VHM
PUMY-P140VHM
Model Name
PUHY-P750TSHM-A
PUHY-P800TSHM-A
Y Series (8HP-14HP)
Page74
PUHY-P THM-A
Model
Model Name
O utdoor unit
Page77
8HP
Y Series (34HP-36HP)
Page78
PUHY-P TSHM-A
10HP
12HP
14HP
PUHY-P200THM-A PUHY-P250THM-A PUHY-P300THM-A PUHY-P350THM-A
Y Series (16HP-18HP)
Page75
PUHY-P THM-A
Model
34HP
36HP
Model Name
PUHY-P850TSHM-A(-BS)
PUHY-P900TSHM-A(-BS)
Y Series (38HP-46HP)
Page79
PUHY-P TSHM-A
Heat Pump Series
Model
16HP
18HP
Model
Model Name
PUHY-P400THM-A
PUHY-P450THM-A
Model Name
Y Series (20HP-24HP)
Page76
Model
20HP
22HP
40HP
42HP
44HP
46HP
Y Series (48HP-50HP)
Page80
PUHY-P TSHM-A
PUHY-P TSHM-A
Model Name
38HP
PUHY-P950TSHM-A PUHY-P1000TSHM-A PUHY-P1050TSHM-A PUHY-P1100TSHM-A PUHY-P1150TSHM-A
24HP
26HP
28HP
PUHY-P500TSHM-A PUHY-P550TSHM-A PUHY-P600TSHM-A PUHY-P650TSHM-A PUHY-P700TSHM-A
Model
48HP
50HP
Model Name
PUHY-P1200TSHM-A
PUHY-P1250TSHM-A
❇The PUHY-P-TSHM-A series requires a Twinning kit (optional). Refer to the data book for details.
Outdoor unit
Page 71
Page 72
OUTDOOR UNIT
S Series
Specifications
OUTDOOR UNIT
Y Series
Specifications
PUMY-P100VHM
Power source
Cooling capacity
(Nominal)
❇1
❇1
❇1
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor
W.B.
Outdoor
D.B.
Temp.
range of
cooling
Heating capacity
(Nominal)
❇2
❇2
❇2
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor temp. D.B.
Outdoor temp. W.B.
Temp.
range
of heating
Indoor unit Total capacity
connectable Model/Quantity
Noise level (measured in anechoic room) dB<A>
Liquid (High press.) mm(in.)
Diameter of
refrigerant pipe Gas (Low press.) mm(in.)
External finish
External dimension H ✕ W ✕ D mm (in.)
kg (lb)
Net weight
Heat exchanger
Type
Compressor Starting method
Motor output
kW
3
m /min
Air flow rate
L/s
cfm
FAN
Type ✕ Quantity
Motor output
kW
High pressure protection
Protection Inverter circuit (COMP./FAN)
Compressor
Refrigerant Type ✕ Original charge
PUMY-P125VHM
PUMY-P140VHM
1-phase 220-230-240V 50Hz, 1-phase 220V 60Hz
11.2
15.5
14.0
9,600
13,300
12,000
38,200
52,900
47,800
3.34
5.35
4.32
15.4-14.8-14.1, 15.4
24.7-23.6-22.7, 24.7
20.0-19.1-18.3, 20.0
3.35
2.9
3.24
15 ~ 24˚C (59 ~ 75˚F)
- 5 ~ 46˚C (23 ~ 115˚F)
10 to 46˚CD.B. (50 to 115˚FD.B.) : in case of connecting PKFY-P20 / P25 type indoor unit.
12.5
18.0
16.0
10,800
15,500
13,800
42,700
61,400
54,600
3.66
5.58
4.33
16.9-16.2-15.5, 16.9
25.8-24.7-23.6, 25.8
20.0-19.1-18.3, 20.0
3.42
3.23
3.69
15 ~ 27˚C (59 ~ 81˚F)
-15 ~ 15˚C (5 ~ 59˚F)
50 ~ 130% of outdoor unit capacity
P20 ~ P140 / 1 ~ 8
P20 ~ P140 / 1 ~ 8
51 / 53
50 / 52
ø9.52 (ø3/8) Liquid
ø9.52 (ø3/8) Liquid
ø15.88 (ø5/8) Gas
ø15.88 (ø5/8) Gas
Galvanized steel sheet <MUNSELL 3Y 7.8/1.1>
1,350 ✕ 950 ✕ 330 (53-3/16 ✕ 37-7/16 ✕ 13)
1,350 ✕ 950 ✕ 330 (53-3/16 ✕ 37-7/16 ✕ 13)
1,350 ✕ 950 ✕ 330 (53-3/16 ✕ 37-7/16 ✕ 13)
127 (280 lb)
127 (280 lb)
127 (280 lb)
Salt-resistant cross fin & copper tube
Inverter scroll hermetic comp.
Inverter
2.2
2.9
3.3
100
100
100
1667
1667
1667
3532
3532
3532
Propeller fan ✕ 2
Propeller fan ✕ 2
Propeller fan ✕ 2
0.06 ✕ 2
0.06 ✕ 2
0.06 ✕ 2
High pressure sensor, High pressure switch 4.15 MPa
Over-heat protection, Over-current protection
Discharge thermo protection, Over-current protection
R410A ✕ 8.5kg (19 lb)
R410A ✕ 8.5kg (19 lb)
R410A ✕ 8.5kg (19 lb)
P20 ~ P125 / 1 ~ 6
49 / 51
ø9.52 (ø3/8) Liquid
ø15.88 (ø5/8) Gas
Note:
❇1
❇1
❇1
22.4
19,300
76,400
5.73
17.6-16.7-15.9
3.90
❇2
❇2
❇2
25.0
21,500
85,300
6.05
18.6-17.6-16.8
4.13
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor
W.B.
Outdoor
D.B.
Temp.
range of
cooling
Heating capacity
(Nominal)
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor temp. D.B.
Outdoor temp. W.B.
Temp.
range
of heating
Indoor unit Total capacity
connectable Model/Quantity
Noise level (measured in anechoic room) dB<A>
Liquid
mm(in.)
Diameter of
refrigerant pipe
Gas
mm(in.)
External finish
External dimension H ✕ W ✕ D
mm(in.)
kg(lb)
Net weight
Heat exchanger
Type
Compressor Starting method
Motor output
kW
3
Air flow rate m /min
L/s
cfm
FAN
Type ✕ Quantity
Motor output
kW
High pressure protection
Protection Inverter circuit (COMP. / FAN)
Compressor
Refrigerant Type ✕ Original charge
PUHY-P250THM-A(-BS)
PUHY-P300THM-A(-BS)
3-phase 3-wire 208-220-230V 60Hz
33.5
28.0
28,800
24,100
114,300
95,500
9.10
8.20
28.0-26.5-25.3
25.2-23.9-22.8
3.68
3.41
15~24˚C(59~75˚F)
- 5~43˚C(23~109˚F)
31.5
27,100
107,500
7.96
24.5-23.2-22.2
3.95
37.5
32,300
128,000
9.40
28.9-27.4-26.2
3.98
PUHY-P350THM-A(-BS)
40.0
34,400
136,500
13.01
40.1-37.9-36.2
3.07
45.0
38,700
153,500
12.12
37.3-35.3-33.8
3.71
15~27˚C(59~81˚F)
-20~15.5˚C(-4~60˚F)
P20~P250 / 1~13
56
ø9.52 (ø3/8) Flare
ø19.05 (ø3/4) Brazed
1,650 ✕ 920 ✕ 760
(65 ✕ 36-1/4 ✕ 29-15/16)
185 (408)
5.4
185
3,083
6,532
Propeller fan ✕ 1
0.35 ✕ 1
R410A ✕ 6.5kg (14 lb + 5 oz)
50~130% of outdoor unit capacity
P20~P250 / 1~16
P20~P250 / 1~16
59
57
ø9.52 (ø3/8) Flare
ø9.52 (ø3/8) Flare
(ø12.7 (ø1/2) Flare, total length >=90m) (ø12.7 (ø1/2) Flare total length>=40m)
ø22.2 (ø7/8) Brazed
ø22.2 (ø7/8) Brazed
Pre-coated galvanized steel sheet <MUNSELL 5Y 8/1>
1,650 ✕ 920 ✕ 760
1,650 ✕ 920 ✕ 760
(65 ✕ 36-1/4 ✕ 29-15/16)
(65 ✕ 36-1/4 ✕ 29-15/16)
185 (408)
210 (463)
Salt-resistant cross fin & copper tube
Inverter scroll hermetic compressor
Inverter
6.7
8.2
185
185
3,083
3,083
6,532
6,532
Propeller fan ✕ 1
Propeller fan ✕ 1
0.35 ✕ 1
0.35 ✕ 1
High pressure sensor, High pressure switch 4.15 MPa (601 psi)
Over-current protection, Over-heat protection
Discharge thermo protection, Over-current protection
R410A ✕ 6.5kg (14 lb + 5 oz)
R410A ✕ 9.0kg (19 lb + 13 oz)
P20~P400 / 1~20
60
ø12.7 (ø1/2) Flare
ø28.58 (ø1-1/8) Brazed
1,650 ✕ 920 ✕ 760
(65 ✕ 36-1/4 ✕ 29-15/16)
210 (463)
10.1
0185
3,083
6,532
Propeller fan ✕ 1
0.35 ✕ 1
R410A ✕ 9.0kg (19 lb + 13 oz)
Note:
❇1 Nominal cooling conditions
Indoor 27˚C (81˚F) DB/19˚C (66˚F) WB, Outdoor 35˚C (95˚F) DB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
❇1 Nominal cooling conditions
Indoor 27˚C (81˚F) DB/19˚C (66˚F) WB, Outdoor 35˚C (95˚F) DB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
❇2 Nominal heating conditions
Indoor 20˚C (68˚F) DB,Outdoor 7˚C (45˚F) DB/6˚C (43˚F) WB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
❇2 Nominal heating conditions
Indoor 20˚C (68˚F) DB,Outdoor 7˚C (45˚F) DB/6˚C (43˚F) WB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
Outdoor unit
Page 73
PUHY-P200THM-A(-BS)
Power source
Cooling capacity
(Nominal)
Outdoor unit
Page 74
OUTDOOR UNIT
Y Series
OUTDOOR UNIT
Y Series
Specifications
Specifications
PUHY-P400THM-A(-BS)
Power source
Cooling capacity
(Nominal)
❇1
❇1
❇1
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor
W.B.
Outdoor
D.B.
Temp.
range of
cooling
Heating capacity
(Nominal)
❇2
❇2
❇2
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor temp. D.B.
Outdoor temp. W.B.
Temp.
range
of heating
Indoor unit Total capacity
connectable Model/Quantity
Noise level (measured in anechoic room) dB<A>
Liquid
mm(in.)
Diameter of
mm(in.)
refrigerant pipe Gas
External finish
External dimension H ✕ W ✕ D mm(in.)
kg(lb)
Net weight
Heat exchanger
Compressor Type
Starting method
Motor output
kW
3
Air flow rate m /min
FAN
L/s
cfm
Type ✕ Quantity
Motor output
kW
Protection High pressure protection
Inverter circuit (COMP./FAN)
Compressor
Refrigerant Type ✕ Original charge
50.0
43,000
170,600
16.29
50.2-47.5-45.4
3.06
45.0
38,700
153,500
13.24
40.8-38.6-36.9
3.39
15~24˚C (59~75˚F)
- 5~43˚C (23~109˚F)
56.0
48,200
191,100
14.55
44.8-42.4-40.5
3.84
50.0
43,000
170,600
12.37
38.1-36.0-34.5
4.04
15~27˚C (59~81˚F)
-20~15.5˚C (-4~60˚F)
50~130% of outdoor unit capacity
P20~P500 / 1~20
P20~P500 / 1~20
62
61
ø15.88 (ø5/8) Flare
ø12.7 (ø1/2) Flare
ø28.58 (ø1-1/8) Brazed
ø28.58 (ø1-1/8) Brazed
Pre-coated galvanized steel sheet <MUNSELL 5Y 8/1>
1,650 ✕ 1,220 ✕ 760 (65 ✕ 48-1/16 ✕ 29-15/16)
1,650 ✕ 1,220 ✕ 760 (65 ✕ 48-1/16 ✕ 29-15/16)
240 (529)
240 (529)
Salt-resistant cross fin & copper tube
Inverter scroll hermetic compressor
Inverter
12.0
10.5
225
225
3,750
3,750
7,945
7,945
Propeller fan ✕ 1
Propeller fan ✕ 1
0.46 ✕ 1
0.46 ✕ 1
High pressure sensor, High pressure switch 4.15 MPa (601 psi)
Over-current protection, Over-heat protection
Discharge thermo protection, Over-current protection
R410A ✕ 11.5kg (25 lb + 6 oz)
Note:
R410A ✕ 11.5kg (25 lb + 6 oz)
Set name
Power source
Cooling capacity
(Nominal)
PUHY-P500TSHM-A(-BS)
❇1
❇1
❇1
56.0
48,200
191,100
17.68
54.5-51.5-49.3
3.16
❇2
❇2
❇2
63.0
54,200
215,000
17.12
52.8-49.9-47.7
3.67
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor
W.B.
Outdoor
D.B.
Temp.
range of
cooling
Heating capacity
(Nominal)
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor temp. D.B.
Outdoor temp. W.B.
PUHY-P550TSHM-A(-BS)
3-phase 3-wire 208-220-230V 60Hz
63.0
54,200
215,000
18.01
55.5-52.5-50.2
3.49
15~24˚C (59~75˚F)
- 5~43˚C (23~109˚F)
PUHY-P600TSHM-A(-BS)
69.0
59,300
235,400
18.48
56.9-53.8-51.5
3.73
15~27˚C (59~81˚F)
-20~15.5˚C (-4~60˚F)
76.5
65,800
261,000
20.35
62.7-59.3-56.7
3.75
69.0
59,300
235,400
21.84
67.3-63.6-60.9
3.15
Temp.
range
of heating
Indoor unit Total capacity
50~130% of outdoor unit capacity
connectable Model/Quantity
P20~P500 / 1~32
P20~P500 / 1~20
P20~P500 / 1~20
Noise level (measured in anechoic room) dB<A>
62
61
60
Liquid
mm(in.)
Diameter of
ø15.88 (ø5/8) Brazed
ø15.88 (ø5/8) Brazed
ø15.88 (ø5/8) Brazed
mm(in.)
refrigerant pipe Gas
ø28.58 (ø1-1/8) Brazed
ø28.58 (ø1-1/8) Brazed
ø28.58 (ø1-1/8) Brazed
Outdoor unit 1 and Outdoor unit 2 PUHY-P250THM-A(-BS) PUHY-P250THM-A(-BS) PUHY-P250THM-A(-BS) PUHY-P300THM-A(-BS) PUHY-P250THM-A(-BS) PUHY-P350THM-A(-BS)
Pre-coated galvanized steel sheet <MUNSELL 5Y 8/1>
External finish
1,650 ✕ 920 ✕ 760
1,650 ✕ 920 ✕ 760
1,650 ✕ 920 ✕ 760
1,650 ✕ 920 ✕ 760
External dimension H ✕ W ✕ D mm(in.) 1,650 ✕ 920 ✕ 760
1,650 ✕ 920 ✕ 760
(65 ✕ 36-1/4 ✕ 29-15/16) (65 ✕ 36-1/4 ✕ 29-15/16) (65 ✕ 36-1/4 ✕ 29-15/16) (65 ✕ 36-1/4 ✕ 29-15/16) (65 ✕ 36-1/4 ✕ 29-15/16) (65 ✕ 36-1/4 ✕ 29-15/16)
185 (408)
210 (463)
185 (408)
210 (463)
kg(lb)
Net weight
185 (408)
185 (408)
Salt-resistant cross fin & copper tube
Heat exchanger
Inverter scroll hermetic compressor
Compressor Type
Inverter
Starting method
6.7
8.2
6.7
10.1
Motor output
kW
6.7
6.7
3
185
185
185
185
Air flow rate m /min
FAN
185
185
3,083
3,083
3,083
3,083
L/s
3,083
3,083
6,532
6,532
6,532
6,532
cfm
6,532
6,532
Propeller fan ✕ 1
Propeller fan ✕ 1
Propeller fan ✕ 1
Propeller fan ✕ 1
Type ✕ Quantity
Propeller fan ✕ 1
Propeller fan ✕ 1
0.35 ✕ 1
0.35 ✕ 1
0.35 ✕ 1
0.35 ✕ 1
Motor output
kW
0.35 ✕ 1
0.35 ✕ 1
High pressure sensor, High pressure switch 4.15 MPa (601 psi)
Protection High pressure protection
Over-current protection, Over-heat protection
Inverter circuit (COMP./FAN)
Discharge thermo protection, Over-current protection
Compressor
R410A ✕ 6.5kg
R410A ✕ 9.0kg
R410A ✕ 6.5kg
R410A ✕ 9.0kg
Refrigerant Type ✕ Original charge
R410A ✕ 6.5kg
R410A ✕ 6.5kg
(14 lb + 5 oz)
(19 lb + 13 oz)
(14 lb + 5 oz)
(19 lb + 13 oz)
(14 lb + 5 oz)
(14 lb + 5 oz)
Twinning kit (optional)
CMY-Y100VBK
CMY-Y100VBK
CMY-Y100VBK
Note:
❇1 Nominal cooling conditions
Indoor 27˚C (81˚F) DB/19˚C (66˚F) WB, Outdoor 35˚C (95˚F) DB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
❇1 Nominal cooling conditions
Indoor 27˚C (81˚F) DB/19˚C (66˚F) WB, Outdoor 35˚C (95˚F) DB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
❇2 Nominal heating conditions
Indoor 20˚C (68˚F) DB,Outdoor 7˚C (45˚F) DB/6˚C (43˚F) WB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
❇2 Nominal heating conditions
Indoor 20˚C (68˚F) DB,Outdoor 7˚C (45˚F) DB/6˚C (43˚F) WB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
Outdoor unit
Page 75
PUHY-P450THM-A(-BS)
3-phase 3-wire 208-220-230V 60Hz
Outdoor unit
Page 76
OUTDOOR UNIT
Y Series
OUTDOOR UNIT
Y Series
Specifications
Set name
Power source
Cooling capacity
(Nominal)
PUHY-P650TSHM-A(-BS)
❇1
❇1
❇1
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW / kW)
Indoor
W.B.
Outdoor
D.B.
Temp.
range of
cooling
Heating capacity
(Nominal )
Specifications
❇2
❇2
❇2
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor temp. D.B.
Outdoor temp. W.B.
73.0
62,800
249,100
22.44
69.2-65.4-62.5
3.25
PUHY-P700TSHM-A(-BS)
PUHY-P750TSHM-A(-BS)
3-phase 3-wire 208-220-230V 60Hz
80.0
85.0
68,800
73,100
273,000
290,000
26.11
26.84
80.5-76.1-72.8
82.7-78.2-74.8
3.06
3.16
15~24˚C (59~75˚F)
- 5~43˚C (23~109˚F)
81.5
70,100
278,100
21.34
65.8-62.2-59.5
3.81
88.0
75,700
300,300
23.75
73.2-69.2-66.2
3.70
95.0
81,700
324,100
24.75
76.3-72.1-69.0
3.83
PUHY-P800TSHM-A(-BS)
90.0
77,400
307,100
29.63
91.3-86.3-82.6
3.03
100.0
86,000
341,200
26.36
81.2-76.8-73.5
3.79
15~27˚C (59~81˚F)
Temp.
-20~15.5˚C (-4~60˚F)
range
of heating
50~130% of outdoor unit capacity
Indoor unit Total capacity
P20~P500 / 1~32
P20~P500 / 1~32
P20~P500 / 1~32
P20~P500 / 1~32
connectable Model/Quantity
62.5
63
64
63.5
Noise level (measured in anechoic room) dB <A>
ø15.88 (ø5/8) Brazed
ø19.05 (ø3/4) Brazed
ø19.05 (ø3/4) Brazed
ø19.05 (ø3/4) Brazed
Liquid
mm(in.)
Diameter of
ø28.58 (ø1-1/8) Brazed
ø34.93 (ø1-1/4) Brazed
ø34.93 (ø1-1/4) Brazed
ø34.93 (ø1-1/4) Brazed
mm(in.)
refrigerant pipe Gas
Outdoor unit 1 and Outdoor unit 2 PUHY-P300THM-A PUHY-P350THM-A PUHY-P350THM-A PUHY-P350THM-A PUHY-P350THM-A PUHY-P400THM-A PUHY-P350THM-A PUHY-P450THM-A
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
Pre-coated galvanized steel sheet <MUNSELL 5Y 8/1>
1,650 ✕ 920 ✕ 760 1,650 ✕ 920 ✕ 760 1,650 ✕ 920 ✕ 760 1,650 ✕ 920 ✕ 760 1,650 ✕ 920 ✕ 760 1,650 ✕ 1,220 ✕ 760 1,650 ✕ 920 ✕ 760 1,650 ✕ 1,220 ✕ 760
(65 ✕ 36-1/4 ✕ 29-15/16) (65 ✕ 36-1/4 ✕ 29-15/16) (65 ✕ 36-1/4 ✕ 29-15/16) (65 ✕ 36-1/4 ✕ 29-15/16) (65 ✕ 36-1/4 ✕ 29-15/16) (65 ✕ 48-1/16 ✕ 29-15/16) (65 ✕ 36-1/4 ✕ 29-15/16) (65 ✕ 48-1/16✕ 29-15/16)
kg(lb)
Net weight
240 (529)
210 (463)
240 (529)
210 (463)
210 (463)
210 (463)
210 (463)
210 (463)
Salt-resistant cross fin & copper tube
Heat exchanger
Inverter scroll hermetic compressor
Compressor Type
Inverter
Starting method
Motor output
kW
10.5
10.1
12.0
8.2
10.1
10.1
10.1
10.1
3
Air flow rate m /min
225
185
225
185
185
185
185
185
L/s
3,750
3,083
3,750
3,083
3,083
3,083
3,083
3,083
cfm
FAN
7,945
6,532
7,945
6,532
6,532
6,532
6,532
6,532
Type ✕ Quantity
Propeller fan ✕ 1 Propeller fan ✕ 1 Propeller fan ✕ 1 Propeller fan ✕ 1 Propeller fan ✕ 1 Propeller fan ✕ 1 Propeller fan ✕ 1 Propeller fan ✕ 1
Motor output
kW
0.46 ✕ 1
0.35 ✕ 1
0.46 ✕ 1
0.35 ✕ 1
0.35 ✕ 1
0.35 ✕ 1
0.35 ✕ 1
0.35 ✕ 1
High pressure sensor, High pressure switch 4.15 MPa (601 psi)
High pressure protection
Over-current protection, Over-heat protection
Protection Inverter circuit (COMP./FAN)
Discharge thermo protection, Over-current protection
Compressor
Refrigerant Type ✕ Original charge R410A ✕ 9.0kg R410A ✕ 9.0kg R410A ✕ 9.0kg R410A ✕ 9.0kg R410A ✕ 9.0kg R410A ✕ 11.5kg R410A ✕ 9.0kg R410A ✕ 11.5kg
(25 lb + 6 oz)
(19 lb + 13 oz) (19 lb + 13 oz) (19 lb + 13 oz) (19 lb + 13 oz) (19 lb + 13 oz) (25 lb + 6 oz) (19 lb + 13 oz)
Twinning kit (optional)
CMY-Y100VBK
CMY-Y100VBK
CMY-Y200VBK
CMY-Y200VBK
External finish
External dimension H ✕ W ✕ D
PUHY-P850TSHM-A(-BS)
❇1
❇1
❇1
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor
W.B.
Outdoor
D.B.
Temp.
range of
cooling
Heating capacity
(Nominal)
PUHY-P900TSHM-A(-BS)
3-phase 3-wire 208-220-230V 60Hz
❇2
❇2
❇2
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor temp. D.B.
Outdoor temp. W.B.
Temp.
range
of heating
Indoor unit Total capacity
connectable Model/Quantity
Noise level (measured in anechoic room) dB<A>
Liquid
mm(in.)
Diameter of
mm(in.)
refrigerant pipe Gas
Outdoor unit 1 and Outdoor unit 2
External finish
External dimension H ✕ W ✕ D mm(in.)
mm(in.)
Note:
kg(lb)
Net weight
Heat exchanger
Type
Compressor Starting method
Motor output
kW
3
Air flow rate m /min
L/s
cfm
FAN
Type ✕ Quantity
Motor output
kW
High pressure protection
Protection Inverter circuit (COMP./FAN)
Compressor
Refrigerant Type ✕ Original charge
Twinning kit (optional)
96.0
82,600
327,600
30.26
93.3-88.2-84.3
3.17
101.0
86,900
344,600
33.35
102.8-97.2-93.0
3.02
15~24˚C (59~75˚F)
- 5~43˚C (23~109˚F)
108.0
92,900
368,500
26.92
83.0-78.4-75.0
4.01
113.0
97,200
385,600
28.65
88.3-83.5-79.9
3.94
15~27˚C (59~81˚F)
-20~15.5˚C (-4~60˚F)
50~130% of outdoor unit capacity
P20~P500 / 1~42
P20~P500 / 1~42
64.5
65
ø19.05 (ø3/4) Brazed
ø19.05 (ø3/4) Brazed
ø41.28 (ø1-1/2) Brazed
ø41.28 (ø1-1/2) Brazed
PUHY-P400THM-A(-BS)
PUHY-P450THM-A(-BS)
PUHY-P450THM-A(-BS)
PUHY-P450THM-A(-BS)
Pre-coated galvanized steel sheet <MUNSELL 5Y 8/1>
1,650 ✕ 1,220 ✕ 760
1,650 ✕ 1,220 ✕ 760
1,650 ✕ 1,220 ✕ 760
1,650 ✕ 1,220 ✕ 760
(65 ✕ 48-1/16 ✕ 29-15/16)
(65 ✕ 48-1/16 ✕ 29-15/16)
(65 ✕ 48-1/16 ✕ 29-15/16)
(65 ✕ 48-1/16 ✕ 29-15/16)
240 (529)
240 (529)
240 (529)
240 (529)
Salt-resistant cross fin & copper tube
Inverter scroll hermetic compressor
Inverter
12.0
12.0
10.5
12.0
225
225
225
225
3,750
3,750
3,750
3,750
7,945
7,945
7,945
7,945
Propeller fan ✕ 1
Propeller fan ✕ 1
Propeller fan ✕ 1
Propeller fan ✕ 1
0.46 ✕ 1
0.46 ✕ 1
0.46 ✕ 1
0.46 ✕ 1
High pressure sensor, High pressure switch 4.15 MPa (601 psi)
Over-current protection, Over-heat protection
Discharge thermo protection, Over-current protection
R410A ✕ 11.5kg (25 lb + 6 oz)
R410A ✕ 11.5kg (25 lb + 6 oz)
R410A ✕ 11.5kg (25 lb + 6 oz)
R410A ✕ 11.5kg (25 lb + 6 oz)
CMY-Y200VBK
CMY-Y200VBK
Note:
❇1 Nominal cooling conditions
Indoor 27˚C (81˚F) DB/19˚C (66˚F) WB, Outdoor 35˚C (95˚F) DB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
❇1 Nominal cooling conditions
Indoor 27˚C (81˚F) DB/19˚C (66˚F) WB, Outdoor 35˚C (95˚F) DB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
❇2 Nominal heating conditions
Indoor 20˚C (68˚F) DB,Outdoor 7˚C (45˚F) DB/6˚C (43˚F) WB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
❇2 Nominal heating conditions
Indoor 20˚C (68˚F) DB,Outdoor 7˚C (45˚F) DB/6˚C (43˚F) WB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
Outdoor unit
Page 77
Set name
Power source
Cooling capacity
(Nominal)
Outdoor unit
Page 78
OUTDOOR UNIT
Y Series
OUTDOOR UNIT
Y Series
Specifications
Set name
Power source
Cooling capacity
(Nominal)
❇1
❇1
❇1
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor
W.B.
Outdoor
D.B.
Temp.
range of
cooling
Heating capacity
(Nominal )
❇2
❇2
❇2
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor temp. D.B.
Outdoor temp. W.B.
Temp.
range
of heating
Indoor unit Total capacity
connectable Model/Quantity
Noise level (measured in anechoic room) dB<A>
Liquid
mm(in.)
Diameter of
mm(in.)
refrigerant pipe Gas
Outdoor unit 1 and Outdoor unit 2
External finish
mm(in.)
External dimension
H✕W✕D
Net weight
kg(lb)
Heat exchanger
Type
Compressor Starting method
Motor output
kW
3
Air flow rate m /min
L/s
cfm
FAN
Type ✕ Quantity
Motor output
kW
High pressure protection
Protection Inverter circuit (COMP./FAN)
Compressor
Refrigerant Type ✕ Original charge
Twinning kit (optional)
Specifications
PUHY-P950TSHM-A(-BS) PUHY-P1000TSHM-A(-BS) PUHY-P1050TSHM-A(-BS) PUHY-P1100TSHM-A(-BS)
3-phase 3-wire 208-220-230V 60Hz
113.0
108.0
118.0
124.0
97,200
92,900
101,500
106,600
385,600
368,500
402,600
423,100
32.5
30.82
36.11
39.93
100.2-94.7-90.6
95.0-89.8-85.9
111.3-105.2-100.7
123.1-116.4-111.3
3.47
3.50
3.26
3.10
15~24˚C (59~75˚F)
- 5~43˚C (23~109˚F)
119.5
102,800
407,700
29.60
91.2-86.3-82.5
4.03
P20~P500 / 1~42
64
ø19.05 (ø3/4) Brazed
ø41.28 (ø1-5/8) Brazed
127.0
109,200
433,300
31.68
97.7-92.3-88.3
4.00
140.0
120,400
477,700
36.36
112.1-106.0-101.4
3.85
50~130% of outdoor unit capacity
P20~P500 / 2~42
P20~P500 / 2~42
P20~P500 / 2~42
64.5
65
65
ø19.05 (ø3/4) Brazed
ø19.05 (ø3/4) Brazed
ø19.05 (ø3/4) Brazed
ø41.28 (ø1-5/8) Brazed
ø41.28 (ø1-5/8) Brazed
ø41.28 (ø1-5/8) Brazed
130.0
111,800
443,600
43.3
133.5-126.2-120.7
3.00
145.0
124,700
494,700
38.34
118.2-111.7-106.9
3.78
P20~P500 / 2~42
65.5
ø19.05 (ø3/4) Brazed
ø41.28 (ø1-5/8) Brazed
PUHY
PUHY
PUHY
PUHY
PUHY
PUHY
PUHY
PUHY
PUHY
PUHY
PUHY
PUHY
PUHY
PUHY
PUHY
-P250THM-A -P300THM-A -P400THM-A -P300THM-A -P300THM-A -P400THM-A -P300THM-A -P350THM-A -P400THM-A -P300THM-A -P350THM-A -P400THM-A -P350THM-A -P350THM-A -P450THM-A
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
(-BS)
Pre-coated galvanized steel sheet <MUNSELL 5Y 8/1>
1,650 ✕
1,650 ✕ 1,650 ✕ 1,650 ✕
1,650 ✕ 1,650 ✕ 1,650 ✕ 1,650 ✕ 1,650 ✕ 1,650 ✕ 1,650 ✕
920 ✕ 760 1,220 ✕ 760 920 ✕ 760 920 ✕ 760 1,220 ✕ 760 920 ✕ 760 920 ✕ 760 1,220 ✕ 760 920 ✕ 760 920 ✕ 760 1,220 ✕ 760
(65 ✕ 36-1/4 (65 ✕ 48-1/16 (65 ✕ 36-1/4 (65 ✕ 36-1/4 (65 ✕ 48-1/16 (65 ✕ 36-1/4 (65 ✕ 36-1/4 (65 ✕ 48-1/16 (65 ✕ 36-1/4 (65 ✕ 36-1/4 (65 ✕ 48-1/16
✕ 29-15/16) ✕ 29-15/16) ✕ 29-15/16) ✕ 29-15/16) ✕ 29-15/16) ✕ 29-15/16) ✕ 29-15/16) ✕ 29-15/16) ✕ 29-15/16) ✕ 29-15/16) ✕ 29-15/16)
210
210
210
240
210
240
240
210
210
210
240
(463)
(463)
(463)
(529)
(463)
(529)
(529)
(463)
(463)
(463)
(529)
Salt-resistant cross fin & copper tube
Inverter scroll hermetic compressor
Inverter
6.7
8.2
10.5
8.2
8.2
8.2
10.1
10.5
8.2
10.5
10.5
10.1
10.1
10.1
12.0
185
185
225
185
185
185
185
225
185
225
225
185
185
185
225
3,083
3,083
3,750
3,083
3,083
3,750
3,083
3,750
3,750 3,083 3,083
3,083
3,083
3,083
3,750
6,532
6,532
7,945
6,532
6,532
7,945
6,532
7,945
7,945 6,532 6,532
6,532
6,532
6,532
7,945
Propeller fan ✕ 1
Propeller fan ✕ 1
Propeller fan ✕ 1
Propeller fan ✕ 1
Propeller fan ✕ 1
0.35 ✕ 1 0.35 ✕ 1 0.46 ✕ 1 0.35 ✕ 1 0.35 ✕ 1 0.46 ✕ 1 0.35 ✕ 1 0.35 ✕ 1 0.46 ✕ 1 0.35 ✕ 1 0.35 ✕ 1 0.46 ✕ 1 0.35 ✕ 1 0.35 ✕ 1 0.46 ✕ 1
High pressure sensor, High pressure switch 4.15 MPa (601 psi)
Over-current protection, Over-heat protection
Discharge thermo protection, Over-current protection
R410A R410A R410A R410A R410A R410A R410A R410A R410A R410A R410A R410A R410A R410A R410A
✕ 6.5kg ✕ 9.0kg ✕ 11.5kg ✕ 9.0kg ✕ 9.0kg ✕ 11.5kg ✕ 9.0kg ✕ 9.0kg ✕ 11.5kg ✕ 9.0kg ✕ 9.0kg ✕ 11.5kg ✕ 9.0kg ✕ 9.0kg ✕ 11.5kg
(14 lb+5 oz) (19 lb+13 oz) (25 lb+6 oz) (19 lb+13 oz) (19 lb+13 oz) (25 lb+6 oz) (19 lb+13 oz) (19 lb+13 oz) (25 lb+6 oz) (19 lb+13 oz) (19 lb+13 oz) (25 lb+6 oz) (19 lb+13 oz) (19 lb+13 oz) (25 lb+6 oz)
CMY-Y300VBK
CMY-Y300VBK
CMY-Y300VBK
CMY-Y300VBK
CMY-Y300VBK
1,650 ✕
920 ✕ 760
(65 ✕ 36-1/4
✕ 29-15/16)
185
(408)
1,650 ✕
920 ✕ 760
(65 ✕ 36-1/4
✕ 29-15/16)
210
(463)
1,650 ✕
1,220 ✕ 760
(65 ✕ 48-1/16
✕ 29-15/16)
240
(529)
1,650 ✕
920 ✕ 760
(65 ✕ 36-1/4
✕ 29-15/16)
210
(463)
Note:
Set name
Power source
Cooling capacity
(Nominal)
❇1
❇1
❇1
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor
W.B.
Outdoor
D.B.
Temp.
range of
cooling
Heating capacity
(Nominal )
❇2
❇2
❇2
kW
kcal/h
Btu/h
Power input
kW
Current input
A
COP (kW/kW)
Indoor temp. D.B.
Outdoor temp. W.B.
PUHY-P1200TSHM-A(-BS)
3-phase 3-wire 208-220-230V 60Hz
136.0
117,000
464,000
44.25
136.4-129.0-123.4
3.07
PUHY-P1250TSHM-A(-BS)
3-phase 3-wire 208-220-230V 60Hz
140.0
120,400
477,700
47.04
145.0-137.1-131.2
2.97
15~24˚C (59~75˚F)
- 5~43˚C (23~109˚F)
150.0
129,000
511,800
39.04
120.4-113.8-108.8
3.84
156.5
134,600
534,000
40.43
124.6-117.8-112.7
3.87
15~27˚C (59~81˚F)
Temp.
-20~15.5˚C (-4~60˚F)
range
of heating
50~130% of outdoor unit capacity
Indoor unit Total capacity
connectable Model/Quantity
P20~P500 / 2~42
P20~P500 / 2~42
Noise level (measured in anechoic room) dB<A>
66
66
Liquid
mm(in.)
Diameter of
ø19.05 (ø3/4) Brazed
ø19.05 (ø3/4) Brazed
mm(in.)
refrigerant pipe Gas
ø41.28 (ø1-5/8) Brazed
ø41.28 (ø1-5/8) Brazed
Outdoor unit 1 and Outdoor unit 2 PUHY-P350THM-A(-BS) PUHY-P400THM-A(-BS) PUHY-P450THM-A(-BS) PUHY-P350THM-A(-BS) PUHY-P450THM-A(-BS) PUHY-P450THM-A(-BS)
External finish
Pre-coated galvanized steel sheet <MUNSELL 5Y 8/1>
1,650 ✕ 920 ✕ 760 1,650 ✕ 1,220 ✕ 760 1,650 ✕ 1,220 ✕ 760 1,650 ✕ 920 ✕ 760 1,650 ✕ 1,220 ✕ 760 1,650 ✕ 1,220 ✕ 760
External dimension H ✕ W ✕ D mm (in.)
(65 ✕ 36-1/4 ✕ 29-15/16) (65 ✕ 48-1/16 ✕ 29-15/16) (65 ✕ 48-1/16 ✕ 29-15/16) (65 ✕ 36-1/4 ✕ 29-15/16) (65 ✕ 48-1/16 ✕ 29-15/16) (65 ✕ 48-1/16 ✕ 29-15/16)
210 (463)
240 (529)
240 (529)
210 (463)
240 (529)
240 (529)
kg (lb)
Net weight
Salt-resistant cross fin & copper tube
Heat exchanger
Inverter scroll hermetic compressor
Type
Inverter
Compressor Starting method
10.1
10.5
12.0
10.1
12.0
12.0
Motor output
kW
3
185
225
225
185
0.045 (230V)
0.045 (230V)
Air flow rate m /min
3,083
3,750
3,750
3,083
3,750
3,750
L/s
6,532
7,945
7,945
6,532
7,945
7,945
cfm
FAN
Propeller fan ✕ 1
Propeller fan ✕ 1
Propeller fan ✕ 1
Propeller fan ✕ 1
Propeller fan ✕ 1
Propeller fan ✕ 1
Type ✕ Quantity
0.35 ✕ 1
0.46 ✕ 1
0.46 ✕ 1
0.35 ✕ 1
0.46 ✕ 1
0.46 ✕ 1
Motor output
kW
High pressure sensor, High pressure switch 4.15 MPa (601 psi)
High pressure protection
Over-current protection, Over-heat protection
Protection Inverter circuit (COMP./FAN)
Discharge thermo protection, Over-current protection
Compressor
R410A ✕ 9.0kg
R410A ✕ 11.5kg
R410A ✕ 11.5kg
R410A ✕ 9.0kg
R410A ✕ 11.5kg
R410A ✕ 11.5kg
Refrigerant Type ✕ Original charge
(19 lb + 13 oz)
(25 lb + 6 oz)
(25 lb + 6 oz)
(19 lb + 13 oz)
(25 lb + 6 oz)
(25 lb + 6 oz)
CMY-Y300VBK
CMY-Y300VBK
Twinning kit (optional)
Note:
❇1 Nominal cooling conditions
Indoor 27˚C (81˚F) DB/19˚C (66˚F) WB, Outdoor 35˚C (95˚F) DB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
❇1 Nominal cooling conditions
Indoor 27˚C (81˚F) DB/19˚C (66˚F) WB, Outdoor 35˚C (95˚F) DB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
❇2 Nominal heating conditions
Indoor 20˚C (68˚F) DB,Outdoor 7˚C (45˚F) DB/6˚C (43˚F) WB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
❇2 Nominal heating conditions
Indoor 20˚C (68˚F) DB,Outdoor 7˚C (45˚F) DB/6˚C (43˚F) WB
Pipe length 7.5 m (24-9/16 ft), Level difference 0 m (0 ft)
Outdoor unit
Page 79
132.0
113,500
450,400
33.87
104.4-98.7-94.4
3.89
15~27˚C (59~81˚F)
-20~15.5˚C (-4~60˚F)
PUHY-P1150TSHM-A(-BS)
Outdoor unit
Page 80
OPTIONAL PARTS FOR INDOOR UNITS
>>4-way cassette type (PLFY-VAM)
Description
SLP-2AA
PLP-6AA
PAC-SG03TM-E
PAC-SG01KF
PAC-SG06SP-E
Decoration panel
Multi-function casement
High-efficiency filter element
Air outlet shutter plate (1 set)
>>2-way cassette type (PLFY-VLMD)
Description
Model
CMP-40VLW-B
CMP-63VLW-B
CMP-100VLW-B
CMP-125VLW-B
PAC-KH11OF
Decoration panel
OA duct flange
Applicable capacity
VAM
–
P32, P40, P50, P63, P80, P100, P125
P32, P40, P50, P63, P80, P100, P125
P80, P100, P125
P32, P40, P50, P63, P80, P100, P125
Model
>>1-way cassette type(PMFY-VBM)
Applicable capacity
PLFY-VLMD-B
P20, P25, P32, P40
P50, P63
P80, P100
P125
P20, P25, P32, P40, P50, P63, P80, P100
Description
Model
Applicable capacity
Decoration panel
PMP-40BM
P20, P25, P32, P40
>>Ceiling concealed type (PEFY-VMH)
Description
Model
Drain lift-up mechanism
PAC-KE04DM-F
PAC-KE86LAF
PAC-KE88LAF
PAC-KE89LAF
PAC-KE85LAF
PAC-KE63TB-F
PAC-KE80TB-F
PAC-KE140TB-F
PAC-KE250TB-F
Long life filter
O ptional parts
Filter box
Applicable capacity
PEFY-VMH
P40~P250
P40, P50, P63
P71, P80
P100, P125, P140
P200, P250
P40, P50, P63
P71, P80
P100, P125, P140
P200, P250
Remarks
Necessary when long life filter is used
>>Ceiling concealed type (PDFY-VM)
Description
Model
Drain lift-up mechanism
Square shape
duct flange
Round shape
duct flange
Filter box for rear
suction
Canvas duct for
bottom suction
PAC-KD02DM-FA
PAC-KD60KDF
PAC-KD61KDF
PAC-KD63KDF
PAC-KD64KDF
PAC-KD32EDF-F
PAC-KD50EDF-F
PAC-KD80EDF-F
PAC-KD125EDF-F
PAC-KD80RTB
PAC-KD81RTB
PAC-KD83RTB
PAC-KD84RTB
PAC-KD85DF
PAC-KD86DF
PAC-KD88DF
PAC-KD89DF
Applicable capacity
P20-P125
P20, P25, P32
P40, P50
P63, P71, P80
P100, P125
P20, P25, P32
P40, P50
P63, P71, P80
P100, P125
P20, P25, P32
P40, P50
P63, P71, P80
P100, P125
P20, P25, P32
P40, P50
P63, P71, P80
P100, P125
Remarks
Description
Filter box for bottom
suction
High efficiency filter
65%
Necessary when air
intake duct or high
efficiency filter is used
at the rear of the
indoor unit
High efficiency filter
90%
Maintenance panel
with air intake
Model
Applicable capacity
PAC-KD70TB
PAC-KD71TB
PAC-KD73TB
PAC-KD74TB
PAC-KD30AF
PAC-KD31AF
PAC-KD33AF
PAC-KD34AF
PAC-KD40AF
PAC-KD41AF
PAC-KD43AF
PAC-KD44AF
MCMP-P36DSWH
MCMP-P56DSWH
MCMP-P90DSWH
MCMP-P160DSWH
P20, P25, P32
P40, P50
P63, P71, P80
P100, P125
P20, P25, P32
P40, P50
P63, P71, P80
P100, P125
P20, P25, P32
P40, P50
P63, P71, P80
P100, P125
P20, P25, P32
P40, P50
P63, P71, P80
P100, P125
Remarks
Nesessary when
efficiency filter is
used at the bottom
of the indoor unit
>>Fresh air intake type (PEFY-VMH-E-F)
Description
Long life filter
Filter box
Drain water lift-up kit
Model
PAC-KE88LAF
PAC-KE89LAF
PAC-KE85LAF
PAC-KE80TB-F
PAC-KE140TB-F
PAC-KE250TB-F
PAC-KE04DM-F
Applicable capacity
P80
P140
P200, P250
P80
P140
P200/P250
P80, P140, P200, P250
>>Ceiling suspended type (PCFY-VGM)
Description
High efficiency filter
Drain lift-up mechanism
Model
PAC-SE80KF-E
PAC-SE81KF-E
PAC-SE82KF-E
PAC-SE84DMA
PAC-SE85DMA
PAC-SH17DM-E
Applicable capacity
P40
P63, P100
P125
P40
P63
P100, P125
Optional parts
Page 81
Page 82
OPTIONAL PARTS FOR OUTDOOR UNITS
Maintaining equipments
>>For PUHY series
Description
High static pressure motor
Twinning kit
Model
PAC-KBU06MT-F
CMY-Y100VBK
CMY-Y200VBK
CMY-Y300VBK
Remarks
~ 60Pa
For PUHY-P500~P700TSHM
For PUHY-P750~P900TSHM
For PUHY-P950~P1250TSHM
>>For PUHY series
Description
Model
CMY-Y102S-G
CMY-Y102L-G1
Branch pipe (Joint)
CMY-Y202-G1
CMY-Y302-G1
Branch pipe (Header)
CMY-Y104-G
CMY-Y108-G
CMY-Y1010-G
Total capacity of indoor unit
200 or below
201-400
401-650
The 1st branch of P450~P650
651 or above
The 1st branch of P700~P1250
For 4 branches
For 8 branches
For 10 branches
Note : Indoor unit capacities
The capacity of an indoor unit is the same as the number used for its type identification.
>>For PUMY-P100 , P125 , P140 VHM
Description
Branch Pipe (2 Branch)
Header
Header
Drain Socket
Centralized Drain Pan
Port Connector (ø9.52 → ø12.7 )
Port Connector (ø15.88 → ø19.05)
Air Protect Guide ( 2 pcs required )
Description
Following tables are applicable when using equipments under the conditions below.
1 Normal use without frequent START/STOPs (The number of START/STOPs is assumed to be less than 6
times per hour in normal use.)
2 Operating hours are assumed to be 10 hours per day/2500 hours per year.
Under the following conditions, equipments may not be able to used at all, or maintenance cycle and
replacement cycle of equipments may need to be shortened.
1 When using equipments in high temperature and humidity or in rapid changes in temperature and humidity
2 When using equipments in a big electric change of power voltage, frequency, and waveform distortion (They
cannot be used outside of acceptable range.)
3 When using equipments installed in a place where there is a lot of vibration
4 When using equipments in the air with hazardous gas or oil mist as well as dust, salinity, and sulfur dioxide/
hydrogen sulfide
5 When using equipments with frequent START/STOP or long operating hours
Table 1. Maintenance cycle
Model
CMY-Y62-G-E
CMY-Y64-G-E
CMY-Y68-G-E
PAC-SG61DS-E
PAC-SG64DP-E
PAC-SG73RJ-E
PAC-SG75RJ-E
PAC-SH63AG-E
Major components
Checking cycle
Compressor
Motor
(Fan, Louver, drain pump)
Bearing
Maintenance cycle
Major components
20,000 hours
Expansion valve
Valve
(solenoid valve, four-way valve)
Sensor
(thermistor, presser sensor)
Drain pan
20,000 hours
1 year
Electric board
Heat exchanger
15,000 hours
25,000 hours
5 years
Checking cycle
Maintenance cycle
20,000 hours
20,000 hours
1 year
5 years
8 years
Note1 This table shows major components. Refer to the maintenance contract for details.
Note2 This maintenance cycle shows a period in which products are expected to require no maintenance. Use this cycle for planning maintenance (budgeting the
maintenance expense etc.) Checking/ Maintenance cycle may be shorter than the one on this table depending on the contents of maintenance check
contract.
OPTIONAL PARTS FOR CONTROL
PAC-SE41TS
PAC-SE55RA
PAC-YG10HA
PAC-SC50KUA
PAC-SA88HA
PAC-SA89TA
PAC-SC36NA
PAC-SC37SA
PAC-SF46EP
LMAP02
PAC-YG41CDA
PAC-YG11CDA
PAC-YG21CDA
PAC-YG31CDA
Maintenance cycle [Note that maintenance cycle does not mean guarantee period.]
Sudden unpredictable accident may occur even if check-up is performed.
Model
Remote Sensor for A/J/K/M-Net Control
Remote ON/OFF adaptor for Indoor Unit
Cable for G-50 I/O
Power supply unit for G-50 / GB-50
Remote Display Adaptor for Indoor Unit
Timer Adaptor for
Output signal connector
Input signal connector
Transmission booster
Air conditioner interface
PLC software for demand input
Electric amount count software
PLC software for general ezipment
BAC netTM interface
Replacement cycle of consumable components
[Note that replacement cycle does not mean guarantee period.]
Table 2. Replacement cycle
Major components
Long-life filter
High-performance filter
Fan belt
Smoothing capacitor
Fuse
Crank case heater
Checking cycle
Replacement cycle
1 year
5 years
1 year
5,000 hours
10 years
10 years
8 years
Note1 This table shows major components. Refer to the maintenance contract for
details.
Note2 This replacement cycle shows a period in which products are expected to
require no replacements. Use this cycle for planning maintenance
(budgeting expenses for replacing equipments etc.)
Optional parts
Page 83
Optional parts
Page 84
MITSUBISHI ELECTRIC MULTIPLE SPLIT TYPE AIR CONDITIONERS
Series
AIR CONDITIONING SYSTEMS
The Air Conditioning & Refrigeration Systems Works acquired ISO 9001 certification under Series
9000 of the International Standard Organization (ISO) based on a review of Quality management for
the production of refrigeration and air conditioning equipment.
ISO Authorization System
The ISO 9000 series is a plant authorization system relating to quality management as stipulated by
the ISO. ISO 9001 certifies quality management based on the "design, development, production,
installation and auxiliary services" for products built at an authorized plant.
FM33568 / ISO 9001;2000
The Air Conditioning & Refrigeration Systems Works acquired environmental management system
standard ISO 14001 certification.
The ISO 14000 series is a set of standards applying to environmental protection set by the
International Standard Organization (ISO).
Certificate Number EC97J1227
http://Global.MitsubishiElectric.com/
HEAD OFFICE: MITSUBISHI DENKI BLDG., 2-2-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
http://Global.MitsubishiElectric.com
MEE05K440
New publication effective Oct 2006
Specifications subject to change without notice