22’’ WIDE LCD MONITOR
USER’S GUIDE
BP2219W
Downloaded from ManualMonitor.com Manuals
©2007 by MAG®. All rights reserved.
Copyright protection claimed includes all forms and matters of copyrightable material
and information now allowed by statutory judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as icons, screen displays, looks, etc.
All MAG® product names mentioned in this publication are trademarks of MAG. Other company trademarks are also acknowledged.
Changes are periodically made to this document. Changes, technical
inaccuracies, and typographic errors will be corrected in subsequent editions.
Downloaded from ManualMonitor.com Manuals
Contents
Table of Contents
CE Marking Declaration Of Conformity........................................................4
Federal Communications Commission (FCC) Statement...........................5
Important Safety Instructions.......................................................................6
Chapter 1 Introducing the Display
Features........................................................................................9
Package Contents......................................................................10
Front View and Controls............................................................. 11
Chapter 2 Installing the Display
Connecting Your LCD Monitor to a Computer ...........................12
Method 1: Analog (D-SUB) Connection.................................12
Method 2: Digital (DVI) Connection.......................................13
Installing Your LCD Monitor........................................................16
Chapter 3 Using the OSD(On Screen Display) Menu
Using the OSD Menu..................................................................17
The OSD Options.......................................................................18
Chapter 4 Technical Information
Preset Mode Timing Chart..........................................................21
DVI Connector PIN Assignment.................................................22
D-SUB Connector PIN Assignment............................................23
Plug and Play.............................................................................24
Visual Inspection.........................................................................25
Troubleshooting..........................................................................25
Specifications.............................................................................26
Downloaded from ManualMonitor.com Manuals
Recycling Place
Recycling Place
PGL Europe B.V. (Proview Group Limited Rotterdam)
Satijnbloem 37,
3068 JP
Rotterdam
Hollande
David Hsieh
Tel: +31-10-238-1090
Fax: +31-10-238-1091
Email: david@proview-group.nl
Xoal bvba
Raketstraat 100-B1130
Bruessels
Mr. Leo Starckx
Tel: +32-2-702-6011
Fax: +32-2-725-2513
Email: rma@proview-repair.com
leo.starckx@proview-repair.com
ASIA
When disposing of MAG Branded Monitors in Asia, please contact the following location to
make arrangements for recycling.
Proview Technology (ShenZhen) Co., Ltd.
North Block 21, 23# Shatoukok Free Trade Zone, ShenZhen, China.
Mr. Dennis Chang
Tel: +86-755-2526-1512
Fax: +86-755-2526-1565
Email:recycling@proview.com.cn
AMERICA
When disposing of MAG Branded Monitors in America, please call the following location to
make arrangements for recycling.
Proview Technology, Inc. (U.S.A.)
7373 Hunt Avenue, Garden Grove, CA 92841 U.S.A.
Patrick Yen
Tel:+714-799-3865
Fax:+714-379-6290
Email:pyen@proview.net
“THIS DISPLAY UNIT IS AN ELECTRIC DEVICE WHICH MAY CONTAIN HAZARDOUS
MATERIALS AND COMPONENTS, AND WHICH MUST BE DISPOSED OF AT END OF LIFE
ACCORDING TO THE PROPER PROCEDURE”
Downloaded from ManualMonitor.com Manuals
ENGLISH
EUROPE
When disposing of MAG Branded Monitors in Europe, please contact one of the following
three locations to make arrangements for recycling.
Proview International (UK) Limited
30 The Avenue, Watford, Hertfordshire
WD17 4AE United Kingdom
Timothy Lo
Tel: +44-1923-248-111
Fax: +44-923-248-222
Email: tim.lo@proview.co.uk
FCC/CE
CE Marking Declaration
Of Conformity
This LCD monitor complies with the requirements of the EC Directive
89/336/EEC “EMC Directive” and 73/23/EEC “Low Voltage Directive” as
amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gives
correct operation in residential areas, business and light industrial premises
and small-scale enterprises, inside as well as outside of the buildings.
All places of operation are characterized by their connection to the public
low voltage power supply system.
Downloaded from ManualMonitor.com Manuals
FCC/CE
This equipment has been tested and found to comply with the limits of a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1. Reorient/Relocate the receiving antenna.
2. Increase the separation between the equipment
and receiver.
3. Connect the equipment into an outlet on a circuit which is different from
what the receiver is connected to.
4. Consult the dealer or an experienced radio/TV technician
for help.
CAUTION:
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user
authority to operate the equipment.
Downloaded from ManualMonitor.com Manuals
ENGLISH
Federal Communications
Commission (FCC) Statement
Important Safety Instructions
Important Safety Instructions
To prevent any injuries, the following safety precautions should be observed in the
installation, use, servicing and maintenance of this equipment.
Before operating this equipment, please read this manual completely, and keep it
nearby for future reference.
Important Safety Instructions
This symbol indicates caution points.
This symbol indicates actions that should not be done.
This symbol indicates actions that must be performed.
• Do not place the equipment on any uneven or unstable carts, stands,
tables, shelves etc. The equipment may fall, causing serious injury to
children or adults and serious damage to the equipment itself.
• Use only a cart or stand recommended by the manufacturer. This
equipment and recommended cart or stand should be handled with
care. Quick stops, excessive force, and uneven surfaces may cause
the equipment and cart/stand to overturn.
• Do not disable the 3-wire grounding type plug. The grounding pin on
the 3-prong plug is an important feature. Removing the grounding pin
will increase the risk of damaging the equipment. If you can not fit the
plug into the electrical outlet, contact an electrician to install a
grounding outlet.
• Always operate this equipment from the type of power source
indicated on the rear of the serial/model plate.
• Never overload wall outlets and extensions.
• Use and handle the power cord with care.
• Do not place any heavy objects on the AC power cord.
• Do not pull the AC power cord. Do not handle the AC power cord with
a wet hand.
• Do not touch the power cord and antenna cable during lightning.
Downloaded from ManualMonitor.com Manuals
Important Safety Instructions
• Remove the plug from the wall outlet if the equipment will not be
used for a long period of time.
• Never expose the equipment to liquid, rain, or moisture.
Seek qualified service if any of the above is spilled into the
equipment.
• Do not attempt to service the equipment yourself.
• Opening and removing the covers may expose you to dangerous
voltage or other hazards and may void your warranty. Refer service
to qualified personnel.
• Always remove the power cord from the outlet before cleaning the
equipment.
• Never use liquid or aerosol cleaners on the equipment. Clean only
with a soft dry cloth.
• Do not expose the equipment to extreme temperature or to direct
sunlight, as the equipment may heat up and suffer damage.
• Do not install the equipment near any heat sources such as
radiators, heat registers, stoves, or any other apparatus that might
produce heat.
• Do not block any ventilating openings. Leave an open space around
the equipment.
• Never place the equipment :on a bed, sofa, rug, or any other similar
surfaces; too close to drapes/curtains/walls, in a bookcase, built-in
cabinet, or any other similar places that may cause poor ventilation.
(continued on next page)
Downloaded from ManualMonitor.com Manuals
ENGLISH
• Do not place, use or handle this equipment near water.
Important Safety Instructions
• If any of the following conditions occur, unplug the power cord from
theoutletandrequestservicefromqualifiedpersonnel.
a. The power cord or plug is damaged.
b. Liquid is spilled into the product .
c. An object falls onto or into the product.
d. The product has been dropped or damaged.
e. The product’s display is abnormal.
DISPOSALOFWASTEELECTRONICEQUIPMENTBYPRIVATE
HOUSEHOLDSWITHINTHEEUROPEANUNION
This sign indicates that this product may not be disposed of
with your regular household waste. The recycling and separate
collection of such products is your responsibility. Please drop off
the above-mentioned waste at a designated place for recycling
waste electrical and electronic equipment. If you do not know
where to drop off your waste equipment for recycling, please
contactyourlocalcityofficeorhouseholdwastecollection
service.
8
Downloaded from ManualMonitor.com Manuals
Chapter 1 Introducing the Display
Chapter 1
Features
• WIDE-SCREEN VISION
A wide screen offer more space than 4:3 or 5:4 monitors. You can
have more content viewed without scrolling windows all the time.
• FAST RESPONSE TIME
The faster response time is good to video or animation to reduce
residual image effect. While playing 3D games or watch video, it can
enhance fluent video streaming.
• SUPERIOR BRIGHTNESS & CONTRAST
High brightness can make images vivid and higher contrast results in
sharper difference between black and white colors. This feature is
able to make the images displayed true to nature and colors
saturated with the gradation.
• PLUG-AND-PLAY CAPABILITY
Easy trouble-free configuration and set-up.
• MULTIPLE VIDEO SIGNAL INPUTS
This multiple signal inputs design allows connection of two more
PCs with just one simple switch. This is especially convenient when
you simultaneously share one monitor with two PCs (e.g. a desktop
and a notebook).
• MULTIMEDIA ENHANCED SPEAKERS
True multimedia sound without using valuable desktop space. The
LCD monitor features two built-in 2w stereo speakers integrated into
the stylish design.
• INTEGRATED POWER DESIGN
The power part is integrated into the whole design and there’s no
more external power adapter to occupy your desktop space.
•
HDCP has been implemented across DVI interface. The HDCP specification
provides a cost-effective and transparent method for receiving the highest
qualitydigital entertainment content from HDMI compliant video sources.
(Specified for HDCP models)
9
Downloaded from ManualMonitor.com Manuals
ENGLISH
Introducing the Display
Chapter 1 Introducing the Display
Package Contents
Make sure all of the following contents are included in the box.
If any items are missing, please return this product to the original place of
purchase.
 LCD Monitor
 CD-ROM(Driver/Manual)
 D-SUB Cable
 Power Cord*
 Audio Cable
 Quick Guide
 Warranty Card
22’’ WIDE LCD MONITOR
QUICK GUIDE
BP2219W
Warranty
Card
* Power cord specification : H05 VV-F 3G 0.75mm2
CAUTION:
Be sure to save original box and all packing material for future
transport of monitor.
10
Downloaded from ManualMonitor.com Manuals
Chapter 1 Introducing the Display
Front View and Controls
ENGLISH
/ INPUT
ITEM
1
5
4
2
3
DESCRIPTION
 ▲▼
In OSD mode, press the ▲▼ buttons to move the selection highlight
to the next menu item counterclockwise or clockwise, respectively.
Adjusts the speaker volume up and down.
 LED
The LED light indicates when the LCD monitor is activated (blue
light indicates power on and amber light indicates power saving).

Turns the LCD monitor on and off.
 AUTO
Press to automatically adjust the display settings to optimize
performance based on the D-SUB signal.
 MENU
Press once to display the OSD (On Screen Display). And press to
activate the items you highlight .
11
Downloaded from ManualMonitor.com Manuals
Chapter 2 Installing the Display
Chapter 2
Installing the Display
Refer to the owner’s manual of the computer for connections.
In the process of connecting external equipment, do not connect any AC power
cords to wall outlets until all other connections are completed.
Connecting Your LCD Monitor to a Computer
Method 1: Analog (D-SUB) Connection
 Turn off the computer and unplug the power cable.
 Connect the signal cable to the VGA port on the back of the computer.
 Connect the audio cable to the line-in port on the back of the computer.
 Connect the power cord to wall outlet and LCD monitor.
 Press the
button, located on the right side of the main unit to turn the
monitor on, then turn the computer on. If the monitor displays an image, the
monitor is successfully installed. If no image is displayed, check all
connections.
12
Downloaded from ManualMonitor.com Manuals
Chapter 2 Installing the Display
ENGLISH
2 D-SUB
2 D-SUB+1 DVI
3 Connect to the Line-in
port
2 Connect to the D-SUB port
4 Connect to power source
NOTE:
The button is used for switching the LCD monitor on and off, it
does not disconnect the device from the main voltage. To completely
disconnect the main voltage, please remove the power plug from the
socket.
NOTE:
The LED indicator is blue when the monitor operates normally and will
turn to amber when in power saving mode. When the monitor is off,
the LED turns dark.
NOTE:
Unplug the monitor before installation to avoid electric shock or
damage.
13
Downloaded from ManualMonitor.com Manuals
Chapter 2 Installing the Display
Method 2: Digital (DVI) Connection
 Turn off the computer and unplug the power cable.
 Connect the signal cable (DVI) to the DVI port on the back of the
computer.
 Connect the audio cable to the line-in port on the back of the computer.
 Connect the power cord to wall outlet and LCD monitor.
 Press the
button, located on the bottom side of the main unit to turn
the monitor on, then turn the computer on. If the monitor displays an
image, the monitor is successfully installed. If no image is displayed,
check all connections.
2 D-SUB+1 DVI
3 Connect to the Line-in
port
2 Connect to the DVI port
4
Connect to power source
NOTE:
Your LCD monitor may come with 2 D-Sub connectors or 2 D-Sub/1 DVI connectors.
HDCP
across
The
provides a cost-effective and transparent method for receiving the highest
quality digital enterainment content HDMI compliant video sources.
(Specified for HDCP models)
14
Downloaded from ManualMonitor.com Manuals
Chapter 2 Installing the Display
If the screen displays “out of range”, please follow the instructions below to
set up:
Press the MENU button to display the OSD.
Press the ▲ or ▼ button to highlight the
(INPUT SELECT) icon,
then press the MENU button. The OSD displays:
1
2
DIGITAL
1
2
INPUT
• Press the ▲ or ▼ button to select DIGITAL INPUT.
HOW TO GET SUPPORT FOR YOUR WIDE SCREEN
The wide-screen display enables you to view your content in a brand new way. The next
generation of computing environments and game consoles are starting to support wide-screen
resolutions.
■ Multitask - view applications side by side and reduce toggling between them.
■ Enrich
- view DVD films in their native wide format for an enhanced multimedia
experience.
■ Experience - enjoy gaming action at higher wide-screen resolution.
However, to enable wide resolution (WSXGA+, 1680x1050), you need to select the
correct setting in your Control Panel>Display>Settings dialog box in Windows®.
Please note, some video cards and PCs with integrated video may not support the
wide-screen resolutions. You may have to update the video chip/card driver or even
purchase a new video card to utilize the advantages of the wide-screen.
For your PC, refer to the available drivers and downloads from the PC manufacturer’s web site.
For upgraded video card, refer to the video card manufacturer’s web site: nVIDIA® (www.nvidia.
com), ATI® (www.ati.com), S3® (www.s3graphics.com), Intel® (www.intel.com), and so on.
15
Downloaded from ManualMonitor.com Manuals
ENGLISH
•
•
Chapter 2 Installing the Display
Installing Your LCD Monitor
Follow the instructions below to set up and install the monitor.
 The package contains:
Display unit
Stand
 Cover an even stable surface with a soft cloth. Place the unit face-down
on the cloth. Fit the stand onto the bottom of the display unit as shown,
then push until the two latches snap into their sockets.
16
Downloaded from ManualMonitor.com Manuals
Chapter 3 Using the OSD Menu
Chapter 3
Using the OSD Menu
To create the best picture, your monitor has been preset at the factory with the
Preset Mode Timing shown on page 21.
The OSD (On Screen Display) Menu allows the user to adjust various settings and
options by following the steps below.

Press the MENU button to display the OSD. The OSD main menu provides
an overview of the selection of controls available.
BRIGHTNESS

Press the ▲ or ▼ button to highlight the desired icon. Then, press
the MENU button to activate the highlighted icon

Press the ▲ or ▼ button to change the value of the selected item.

Select the EXIT icon to exit the OSD.

Repeat steps 1 through 4 to make further adjustments. All changes are
stored immediately.
17
Downloaded from ManualMonitor.com Manuals
ENGLISH
Using the OSD(On Screen Display)Menu
Chapter 3 Using the OSD Menu
The OSD(On Screen Display) Options
The OSD (On Screen Display) menu includes the following options:
BRIGHTNESS
O BRIGHTNESS
Controls the overall brightness.
CONTRAST
Controls the difference between the brightest and darkest
regions of the picture.
H. POSITION Adjusts the position of the picture left and right in the window.
V. POSITION
Adjusts the position of the picture up and down in the window.
H.SIZE Adjusts the width of the picture.
PHASE Adjusts signal phase, which can improve focus clarity and
image stability.
18
Downloaded from ManualMonitor.com Manuals
Chapter 3 Using the OSD Menu
COLOR Allows selection of the general color tint:
Select User Mode, WARM, or COOL.
ENGLISH
RED
COOL
WARM
Select User Mode
Allows the user to adjust red, green and blue color
component levels independently.
COOL
Inclines colors toward the blue end of the spectrum.
Fixes the red, green and blue component levels at
factory settings; they cannot be independently adjusted.
WARM
Inclines colors toward the red end of the spectrum.
Fixes the red, green and blue component levels at
factory settings; they cannot be independently adjusted.
EXIT
Exits the OSD menu.
INPUT SELECT
Allows selection of ANALOG INPUT or DIGITAL INPUT
depending on the type of input signal currently in use.
RESET Restores all options to the factory settings.
LANGUAGE
Controls which language is used on all the on-screen menus.
19
Downloaded from ManualMonitor.com Manuals
Chapter 3 Using the OSD Menu
OSD
Changes the position of the OSD.
H. POSITION Moves the OSD left and right in the window.
V. POSITION Moves the OSD up and down in the window.
EXIT
Exits the OSD menu.
EXIT
Exits the OSD.
20
Downloaded from ManualMonitor.com Manuals
Chapter 4 Technical Information
Chapter 4
ENGLISH
Technical Information
Preset Mode Timing Chart
The screen image has been optimized during manufacture for the display modes
listed below.
Video signal: (IBM PC/AT)
Dot X Line
Horizontal Frequency(kHz)
Vertical Frequency(Hz)
720 x 400
31.47
70.00
640 x 480
31.47
60.00
37.86
72.80
37.50
75.00
35.16
56.25
37.88
60.30
48.08
72.20
46.87
75.00
48.36
60.00
56.48
70.10
60.02
75.00
63.98
60
800 x 600
1024 x 768
1280 x 1024
1440 x 900
1680 x 1050
79.98
75
55.47
59.90
70.64
74.98
64.67
60
21
Downloaded from ManualMonitor.com Manuals
Chapter 4 Technical Information
DVI Connector PIN Assignment
1
8
9
16
17
24
C1 C2
C3 C4
PIN
DESCRIPTION
PIN
DESCRIPTION
1
TMDS Data 2-
15
GND
2
TMDS Data 2+
16
Hot Plug Detect
3
TMDS Data 2/4 shield
17
TMDS Data 0-
4
18
TMDS Data 0+
5
19
TMDS Data 0/5 shield
6
DDC Clock
20
7
DDC Data
21
8
Analog Vertical Sync
22
Clock shield
9
TMDS Data 1-
23
Clock +
10
TMDS Data 1+
24
Clock -
11
TMDS Data 1/3 shield
C1
Analog red
12
C2
Analog green
13
C3
Analog blue
C4
Analog
14
+5V Power
22
Downloaded from ManualMonitor.com Manuals
Chapter 4 Technical Information
D-SUB Connector PIN Assignment
UB Connector PIN Assignment
10
15
PIN
ENGLISH
1
6
11
5
DESCRIPTION
1
Red
2
Green
3
Blue
4
Ground
5
Self Test
6
Red Ground
7
Green Ground
8
Blue Ground
9
5 VDC
10
Ground
11
Ground
12
SDA (FOR DDC)
13
H. Sync
14
V. Sync
15
SCL (FOR DDC)
23
Downloaded from ManualMonitor.com Manuals
Chapter 4 Technical Information
Plug and Play
This monitor conforms to the VESA DDC (Display Data Channel) standard, which
means that when it is used with a DDC compatible video card, the monitor is easier
to set up. With VESA DDC 1/2B, when the monitor is turned on, it will automatically
notify a windows 9X/2000/XP host computer of its scanning frequencies,
capabilities and characteristics. Windows 9X/2000/XP will automatically recognize
the presence of the monitor and select the appropriate display resolution.
Visual Inspection
Permanently unlit or lit pixels
The standard of production techniques today cannot guarantee an absolutely fault
free LCD display. A few isolated permanently lit or unlit pixels may be present. The
maximum permitted number of pixel faults is stipulated in the stringent international
standard ISO 13406-2 (Class II).
24
Downloaded from ManualMonitor.com Manuals
Chapter 4 Technical Information
Troubleshooting

Monitor will not turn on
• Make sure the power cord is plugged in.

No picture
• Make sure the power cord is plugged in.
• Check the signal cable connecting the LCD monitor and the computer
(refer to page 12-15).
• Press the
button on the front panel of the monitor.

Poor picture or abnormal picture
• Check the signal cable connecting the LCD monitor and the computer
(refer to page 12-15).
• Press the MENU button to adjust the Brightness Contrast option in the
OSD.
• Adjust the Color Select option in the OSD.
• Press the AUTO button on the front panel of the monitor, to
automatically adjust the display mode.

Out of range message appears
• Press the MENU button. Highlight the INPUT SELECT icon, then press
the MENU button. Press the ▲ or ▼ button to select DIGITAL
INPUT (refer to page 15).
• If using Windows 9X/2000/XP, wait a few seconds; once Windows
detects the problem, a dialog will appear allowing you to manually set
up the video mode according to the preset mode timing chart
(refer to page 21).
25
Downloaded from ManualMonitor.com Manuals
ENGLISH
Before consulting service personnel, check the following chart for a possible
cause and solution to the trouble you are experiencing.
Chapter 4 Technical Information
Specifications
MODEL
BP2219W
LCD Panel Panel Size
Brightness
Contrast Ratio
Dot Pitch
Build-in Speaker
Max. Resolution
Input Connector
Power Source
Power Consumption
Dimension(WxHxD)
22”w TFT LCD
300
700:1
0.282mm x 0.282mm
Yes
1680x1050
D-SUB x 2/ DVI x 1/PC AUDIO or D-SUB x 2/PC AUDIO
AC100-240V, 50-60Hz
60W
523.7x398.2x178 mm
Changes are periodically made to this specifications.
Current specifications may also be obtained via the internet,
www.mag.com.tw
26
Downloaded from ManualMonitor.com Manuals