Denver DRS-1500 Operating instructions

DVD / MP3 / CD HOME THEATER
DRS-1500
OPERATION MANUAL
mp3
PLEASE READ THE INSTRUCTION CAREFULLY BEFORE OPERATING THIS UNIT.
WARNING
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
The apparatus shall not be exposed to dripping or slashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
IMPORTANT
Since the CD circuitry may cause interference to other radio tuners nearby, switch this unit off
when not in use or move it away from the affected radio tuner.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of
uninsulated "dangerous voltage"
within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an
equilateral triangle is intended to
alert the user to presence of important operating and maintenance (servicing) instructions in
the literature accompanying the
appliance.
DANGER
INVISIBLE LASER
RADIATION WHEN
OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO
LASER BEAM.
LASER SAFETY
This unit employs an optical laser beam system in the CD mechanism,
designed with built -in safeguards. Do not attempt to disassemble,
refer to qualified service personnel. Exposure to this invisible laser
light beam may be harmful to the human eye.
THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS, OR
ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM
EXPOSURE.
2
Getting Started
Before attempting to connect, operate or adjust this product, please read these instruction
completely and keep this manual for future reference.
Dear customers :
May we take this opportunity to thank you for purchasing this DVD HOME THEATER.
We strongly recommend that you carefully study the operating instructions before operating
the unit.
Main Features
• Front loading DVD / MP3 / CD player.
• Built-in Dolby Digital, Dolby Prologic Decoder.
• Built-in 5.1 Channel Amplifier.
• FM/MW tuner (can preset 20 radio stations) (load impedance : 75 ohm).
• With 5.1 Channel Speaker system (Micro Satellite Speakers x 5, Passive Sub woofer x 1)
• 2 Sets audio in (Audio only)
• Surround sound function
• Sleep mode
Standards
Video : NTSC or PAL
Audio : PCM (48 or 96 kHz), 5.1 Channel MPEG layer 2, Dolby AC-3 & dts line out,
3mm Stereo Headphone Jack
Features of audio specifications
–
–
–
DOLBY Digital 5.1 ch decoding output
DTS (Digital Theater System) digital output
Linear PCM output
3
Getting Started
Disc types
Audio & Video
MP3
Disc size 12cm
single side, single layer / single side, double layer
PAL and NTSC DVD disc
Playback time 135min / 240min max.
Audio
Disc size 12cm / 8cm
CD disc
Playback time 74min/20min max.
Audio
MP3 format disc
* Player is CD-R, CD-RW compatible.
Note: CD-R, CD-RW Discs recorded with writing device can only be used when they are
correctly treated.
Region Management Information
This DVD Player is disigned and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does
not correspond to the Region number of this DVD Player, this DVD player cannot play that
disc.
This Region number of this DVD player is
.
Disc manintenace
– Before playback, wipe the disc from the center hole toward the outer edge with a clean
cloth.
– Never use bezine, thinner, cleaning fluid, static electricity prevention liquids or any other
solvent.
Note : Dirty disc may cause bad picture.
Correct
Incorrect
From the center to the edge
4
Safety precautions
Warning
Attention
To avoid electrical shock, do not open the
cabinet, refer servicing to qualified personnel only.
If smoke, malodor or unrelated noise are
emitted from the unit, turn off the power and
disconnect the AC power cord.
Warning
Attention
Keep the unit away from flower vases, tubs,
sinks, etc. If liquids are spilt into the unit,
serious damage could occur.
Touching the unit is dangerous especially if
during thunder.
Warning
Attention
Do not expose this equipment to rain or
moisture.
When left unused for a long period of time,
the unit should be unplugged from the household AC outlet.
Warning
Attention
Do not block ventilation holes of the unit so
that air can circulate freely,
Be sure to turn the unit off and disconnect the AC
power cord before cleaning the unit surface. If the
surface is dirty, wipe clean with a cloth which has
been dipped in a weak soap and water solution and
wrung out thoroughly, and then wipe again with a
dry cloth.
Note: This unit is a class 1 laser product and uses a visible laser beam which could
cause hazardous radiation exposure if directed. Be sure to operate it correctly as
instructed.
5
Getting Started
Battery installation (remote control unit)
1. Remove the battery cover.
2. Insert two batteries (AA, R6, UM-3 types) making sure the polarity (+/-) matches the marks
inside the unit.
3. Replace the cover.
– Do not attempt to recharge, short-circuit, disabssemble,
heat or throw the batteries into the fire.
+
—
– Do not mix old and new batteries
Note : Weak batteries can leak and severely damage the remote control unit.
+
1
1.
2.
3.
4.
5.
20
2
21
3
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
22
4
5
6
23
24
25
7
8
9
10
11
12
13
14
15
16
26
27
28
29
30
31
32
33
17
18
19
35
34
36
37
38
6
Display Button
Open/Close Button
Numeric Buttons
Sleep Button
Direction Buttons
( Up / Down/ Left/ Right)
Title Button
Memory / Pause Button
Subtitle Button
Fast Backward Button
Angle Button
Audio Button
Prologic Button
Program Button
Default
Mute Button
Shuffle Button
Slow Button
Repeat Button
ST/Mono Button
Setup Button
Standby Button
Zoom Button
Enter / Play Button
Surround Button
Step Button
Volume Control
Fast Forward Button
Stop Button
PBC / Menu Button
Digest Button
Input Button
PAL/NTSC/MULTI Button
Repeat A – B Button
Resume Button
Go To Button
Next Button
EQ Graph Button
Previous Button
—
Remote Control Unit
Getting Started
System Connection
Warning : Turn off the power and keep AC cord pulled out from the outlet when connecting the system.
AUDIO OUT
COAXIAL WIRE
TV
TO TV SCART
VIDEO OUT
FM wire antenna (supplied)
+
_
+
_
AC OUTLET
ON THE WALL
optical wire
AM loop antenna (supplied)
S -VIDEO
+
AUDIO IN (1)
AUDIO IN (2)
_
+
_
+
_
+
_
FRONT SPEAKER FRONT SPEAKER
REAR SPEAKER
REAR SPEAKER
(RIGHT SURROUND) (LEFT SURROUND) (RIGHT SURROUND) (LEFT SURROUND)
Notes:
Antenna Connection
• To prevent noise pickup, keep the MW loop antenna away from the DVD Receiver and
other component.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as horizontal as possible.
Speaker System Connection
• Be sure to match the speaker cord to the appropriate terminal on the components: + to +
and – to –. If the cords are reversed, the sound will be distorted and will lack base.
• If you use front speakers with low maximum input rating, adjust the volume carefully to
avoid excessie output on the speakers.
• Do not disassemble the front cover of supplied speaker.
7
Getting Started
Front Panel Control
(Most of the function can be controlled by remote control unit.)
1
2 14 15
3
1.
2.
3.
4.
5.
6.
7.
8.
12
4 5 6 7
8
9.
10.
11.
12.
13.
14.
15.
Disc Tray
Open/Close Button
On/Standby Button
Search Down / Tuning –
Search Up / Tuning +
Skip Backward / CH – Button
Skip Forward / CH + Button
Stop/Band Button
9
10 11
13
Play/Enter Button
Pause/Memory Button
Input Button
Volume Control
Phone Jack
Standby / On Indicator
Remote Sensor
VFD Display
3
1
DVD
6
7
8
9
10
11
TITLE
CHP
ST.
TUNED
3D
dts
12
13
DIGITAL
KHz
MHz
VIDEO
4
2
14
L
LS
C
R
S RS
5
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Disc Type Indicator
Play Mode Indicator
Lock Indicator
Pause Indicator
Play Indicator
Title Number
Chapter Number Indicator
8
ST. Indicator
Tuned Indicator
3D Indicator
DTS Indicator
Sound Mode Indicator
KHz/MHz Indicator
Speaker Indicator
BASIC PLAYBACK
This section shows you the basics on how to playback a DVD Video Disc.
PREPAREATION
1
2
• When you want to playback DVD video discs, turn on
the TV and select the video input source connected to
the DVD receiver.
• When you want to enjoy the sound of the DVD video
discs or audio CDs from the audio system, turn on the
3
11
audio system and select the input source connected to
the DVD receiver.
• For connection details, see page 7.
• Set the playback picture size according to the aspect ratio of the connected TV at the SETUP menu (TV Aspect).
1. Press STANDBY on the front panel or
on the remote
control.
The DVD receiver turn on and the display window lights.
2. Press INPUT on the front panel or remote control repeatedly until the CD/DVD appears in the display window.
3
1
6
5
on the remote control, the disc
3. Press OPEN/CLOSE or
tray opens.
• You can open/close the disc tray by pressing this button.
4. Place a disc on the disc tray with playback side down.
• There are two different disc sizes. Place the disc in the
correct guide on the disc tray. If the disc is out of the
guide, it may damage the disc and cause the DVD receiver the malfunction.
• Do not place anything except 3” disc or 5” discs on the
disc tray.
2
SLOW
ST/MONO
5. Press PLAY.
The disc tray is automatically close and playback begins.
• If the disc is placed in upside down (and it is a single
sided disc), “NO DISC” or “DISC ERROR” appears on
the TV screen.
• If insert an audio CD, it will auto start the title number
does not appear.
• After playing back all of the chapters in the title, the DVD receiver automatically stops and
returns to the title number.
6. Press the Numeric button(s) to select the desired item.
Play of the selected item now begins.
After operation
When the unit is not in use, remove the disc and press
to turn off power.
9
the remote control or STANDBY ON
SPECIAL PLAYBACK
STOP PLAY
Press STOP during playback. The first time return to Logo. Press RESUME can go on playing at the stop point. The second time is full stop.
RESUME PLAY
• When play is stopped, the unit records the point where STOP is pressed (RESUME function).
• Press PLAY and play will resume from that point.
OTHERS
• Resume function will be cleared when STOP is pressed on the stop mode.
• Resume function will be cleared when power is turned off and then on.
• Opening the disc tray cancels Resume function.
• The Resume function may not be available on some DVD discs and MP3 discs.
STILL PICTURE
Press PAUSE during playback.
• DVD
The DVD receiver will be placed in the still picture mode.
• CD
The DVD receiver will be placed in the pause mode.
FRAME ADVANCE (DVD only)
Press STEP during playback.
• DVD
(each time you press STEP, the picture advances one frame).
To resume normal playback, press PLAY.
Skip Chapters and Tracks Forward or Backward
Skip Forward
Press NEXT button or SKIP
button during playback. A chapter (DVD) or a track (CD) is
skipped each time the button is pressed.
Skip Backward
Press PREVIOUS button or SKIP
button during playback.
• When the button is pressed once midway through a chapter/track, the DVD receiver returns
to the start of the previous chapter/track.
• When it is pressed again, a chapter/track is skipped each time the button is pressed.
Scan at fast forward or fast backward playback
You can playback discs at various speeds.
• Press and hold fast backward
or fast forward
button will fast scan the disc as below
order.
CD and DVD Disc fast forward (backward) : –> 2X –> 4X –>8X –> 16X –> normal
10
Playing in Slow-Motion (for DVD only)
• Press SLOW button during playback
The playback speed becomes : –> 1/2 –> 1/4 –> 1/8 –>1/ 16 –> normal of the normal speed.
• To return to normal playback, press PLAY.
Notes:
• The sound is muted during the slow-motion playback.
• Subtitles do not appear on the screen during slow-motion playback.
• The SLOW SCAN button do not work with Audio CDs.
DISPLAY
Press DISPLAY button during playback
• First press the DISPLAY, the TV appear as :
• Second time press the DISPLAY
• Third time press the DISPLAY
• Fourth time press the DISPLAY
Title Elapsed
TT 04/55 CH 01/01
0:01:39
Title Remain
TT 04/55 CH 01/01
0:01:11
Chapter Elapsed
TT 04/55 CH 01/01
0:01:58
Chapter Remain
TT 04/55 CH 01/01
0:01:08
• Fifth time press the DISPLAY, it will clear the display, the screen return to normal.
CHANGING SUBTITLE LANGUAGE
It is possible to change the subtitle language to a different language from the one selected at
the initial settings.
This operation works only with discs on which multiple subtitle language are recorded.
Note:
• In some cases, the subtitle language is not changed to the selected one immediately.
• When a disc supporting the closed caption is played, the subtitle and the closed caption
may overlap each other on the TV screen. In this case, turn the subtitle off.
• When the desired language is not selected even after pressing the button several times, it
means that the language is not available on the disc.
• When the power is turned on or the disc is removed, subtitles appears in the language
selected at the initial settings. If this language is not recorded on the disc, the disc’s priority
language appears.
1. Press SUBTITLE during playback
When no subtitle are recorded, “OFF” will be displayed instead of the language number.
2. Press SUBTITLE repeatedly until the desired languge is selected.
Number of the subtitle language being played back is shown.
To eliminated the On Screen Subtitles
Press SUBTITLE repeatedly to select OFF at step 2.
11
CHANGING AUDIO SOUNDTRACK LANGUAGE
It is possible to change the audio soundtrack language (or encoding method, channel number)
to a different language from the one selected at the initial settings in case of DVD disc. This
operation works only with discs on which multiple audio soundtrack languages are recorded.
And it is possible to change the audio channel.
Notes:
• When the desired language is not selected even after pressing the button several times, it
means this language is not available on the disc.
• When the power is turned on or the disc is removed the language heard is the one selected
at the initial settings. If this language is not recorded on the disc, only the available language on the disc will be heard.
• Some discs may not respond to Audio feature.
DVD/CD
1. Press AUDIO during play.
Number of the audio soundtrack language being placed back.
2. Press AUDIO repeatedly until the desired language (or encoding method, channel number)
is selected.
CHANGING SCENES
Some DVDs may contain scenes which have been shot simultaneously from a number of
different angles. For these discs, the same scene can be viewed from each of these different
angles using the ANGLE button. (The recorded angles differ depending on the disc used.)
Notes:
• This function only works for discs having scenes recorded at different angles.
1. Press ANGLE during playback
Number of the angle being played back.
2. Press ANGLE repeatedly until the desired angle is selected.
For your reference
• The ANGLE indicator will blink in the display window at scenes recorded at different angles
to indicate that angle switching is possible.
REPEAT PLAY
Repeating viewing (listening)
1. Press REPEAT during playback
Each time this button is pressed. The TV screen changes as shown below and the disc will
repeat a chapter or title (DVD) or a track (CD)
DVD
Repeat Chapter –> Repeat Title –> Repeat All –> normal play
CD
Repeat Track –> Repeat All –> Repeat off
12
Repeating sections between two specific points (A–B repeat)
2. Press REPEAT A–B during play at the point where repeat play is to start (A).
3. Press REPEAT A–B during play at the point where repeat play is to be concluded (B).
Repeat play of the selection between points A and B starts.
To return to normal play
Press REPEAT A–B once “OFF” is displayed.
ZOOM FEATURES
The Zoom feature allows you to “ZOOM-IN” and enlarge the picture on the screen to 2 times
(x 2), 3 times (x 3) or 4 times (x 4) than its normal size.
1. Press ZOOM during normal playback or still playback.
Each time you press ZOOM, it is changed as the following order:
ZOOM 2 times –> 3 times –> 4 times –> normal
2. Press ZOOM during normal playback or still playback.
3. If you press /// buttons, the Zoom point shifts.
4. Press ZOOM during normal playback or still playback.
PROGRAM PLAY
The receiver plays the tracks on the disc in the order you specify.
1. Press PROGRAM, the screen appears the program screen.
When playing DVD
When playing CD
Program : TT (55) / CH ( - - )
01
TT: CH: 06
:
:
:
:
05
10
EXIT
STOP
NEXT
TT : Title
CH : Chapter
Program Track
01
:
:
05
EXIT
STOP
( 01 - - 10 )
06
:
:
10
NEXT
2. Move /// to the 1~10 position input the title number and chapter number in case of
DVD / CD input the track number.
3. Move /// to start and enter, then begin to play on the program turned.
4. If you want to clear the program memory, you can enter to the program menu, and press
STOP.
13
MP3 Play
1. PLAY MP3 DISC
• Load MP3 disc
The MP3 menu is displayed and play automatically.
• Press / button to move the yellow bar to the track, and press ENTER.
• The track number and current page only be changed by moveing the /button.
• When press next, the previous track will play next track.
2. Repeat
• Press REPEAT button the screen will show:
first time repeat one –> repeat folder –> folder (repeat off)
3. Shuffle
• Press SHUFFLE, the MP3 track will be played at the shuffle mode.
SLEEP
Press the SLEEP button once, it will power off automatically in 10 minutes. It can reach to 120
minutes at most.
SURROUND FUNCTION
1. When play CD, press the SURROUND button the song tone will change by this turn:
CONCERT –> LIVING ROOM –> HALL –> BATHROOM –> CAVE –> ARENA –> CHURCH
2. Whe play DVD, press the SURROUND button the song will reverb by this turn:
ROCK –> POP –> LIVE –> DANCE –> TECHNO –> CLASSIC –> SOFT
RADIO STATION PRESETTTING
1. Press INPUT button
Press INPUT button until the FM or MW appear in the display window.
2. Each time you press FM/MW, FM and MW change in an alternate order. Press the STOP
button to change the band.
3. Press and hold TUNING / SEARCH
or
for about two seconds until the frequency
indication starts to charge, then release.
4. Press MEMORY/PAUSE on the front panel or PBC/MENU button on the remote control.
A preset number will flash in the display window.
5. Press the numeric button(s), to select the desired track number.
6. Repeat steps 3 to 5 to store other stations.
LISTENING TO THE RADIO
Press radio stations in the DVD receiver’s memory first (see “Radio station presetting”)
1. Press INPUT button
Press the INPUT button until the FM or MW appear in the display window.
2. Each time you press FM/MW, FM and MW change in an alternate order.
3. Press CH/ SKIP
or
button or numeric button to select the preset station you want.
14
To listen to non-preset radio stations
• Use manual tuning, press TUNING/SEARCH
or
button.
• Use automatic tuning, press and hold TUNING/SEARCH
or
button for 2 seconds.
To turn off the radio
Press POWER to turn the DVD receiver off or select another function mode (DVD/CD) by
press INPUT button.
SETTING UP MENU
Once the initial settings have been completed, the DVD receiver can always be operated
under the same conditions (especially with DVD discs). The settings will be retained in the
memory until they are changed, even if the power is off.
1. Press SETUP in the stop or playback mode. The SETUP menu is display.
2. Press // /button to select, and press ENTER button to enter the main page.
The SETUP menu operation can set up the general, speaker, audio, preferences and
password.
To exit SETUP menu
Press / button to select “EXIT SETUP” to exit the main page.
GENERAL SETUP
• Press / button to select GENERAL PAGE and press ENTER.
The left is the main catalog, the right is the children catalog.
• Press / button to enter the children catalog and press ENTER to confirm.
1. Setup the TV DISPLAY
• Select NORMAL/PS, the TV playback in FULL size, but
it will lose the up, down and left, right angles.
• Select NORMAL/L2, the TV playback in normal complete picture.
• Select WIDE, the TV playback in FULL size, but it will
lose the left, right angles.
2. Setup ANGLE MARK
• Some DVD disc is recorded by serval video camera
from the different angles to take. When playback, can
select the one of the angle to see.
- ON, open the angle
- OFF, close the angle
• The disc must have the angle mark, the set up can
work.
15
-- GENERAL PAGE -TV DISPLAY NORMAL/PS
ANGLE MARK
NORMAL/L2
OSD LANG
WIDE
CAPTIONS
SCR SAVER
-- GENERAL PAGE -TV DISPLAY
ANGLE MARK ON
OSD LANG
OFF
CAPTIONS
SCR SAVER
3. Set up the OSD LANG
• You can select the TV display language.
-- GENERAL PAGE -TV DISPLAY
ANGLE MARK
ENGLISH
OSD LANG
CAPTIONS
FRENCH
SCR SAVER
GERMAN
SPANISH
DANISH
SWEDISH
-- GENERAL PAGE --
4. Set up CAPTIONS
- ON, open the CAPTIONS
- OFF, close the CAPTIONS
TV DISPLAY
ANGLE MARK
OSD LANG
CAPTIONS
ON
SCR SAVER
OFF
5. Setup SCR SAVER
• When no disc or playback stop some time, the unit will
automatic open the Screen Saver function. This time
the screen will become black, only the DVD pattern
move on the screen. This function is to protect the TV
screen long time display will be hurt.
- ON, open the SCR SAVER.
- OFF close the SCR SAVER.
AUDIO SETUP
• Press / button to select AUDIO SET UP and press
ENTER. The left is the main catalog, the right is the
children catalog.
• Press / button to enter the children catalog and
press ENTER to confirm.
1. SPEAKER SET UP
• Press / button to select AUDIO SET UP and press
ENTER. The left is the main catalog, the right is the
children catalog.
• Press / button to enter the children catalog and
press ENTER to confirm.
Setup DOWNMIX MODE
• LT/RT
When the playback disc with the PROLOGIC
DOLBY stereo, select this item, throught this unit’s
decode system, you can enjoy effect in your room
similiar as in the movie theater.
16
-- GENERAL PAGE -TV DISPLAY
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER ON
OFF
-- AUDIO SETUP PAGE -SPEAKER SETUP DOWNMIX
DOLBY DIGITAL
CHANNEL DELAY
EQUALIZER
3D PROCESSING
FRONT SPEAKER
CENTER SPEAKER
REAR SPEAKER
SUBWOOFER
-- SPEAKER SETUP PAGE -DOWNMIX
LT/RT
FRONT SPEAKER
STEREO
CENTER SPEAKER
V SURR
REAR SPEAKER
OFF
SUBWOOFER
• STRERO
When source is two channel, the video output is the
common stereo signal. When source is 5.1 channel,
only output the left and right 2 channel signal.
-- SPEAKER SETUP PAGE -DOWNMIX
FRONT SPEAKER LARGE
CENTER SPEAKER
SMALL
REAR SPEAKER
• V SURR
Surround sound.
SUBWOOFER
• OFF
Close the DOWNMIX.
-- SPEAKER SETUP PAGE -DOWNMIX
FRONT SPEAKER
• You can select the 5.1 channel ON or OFF by the
Center, Rear, Subwoffer, Item ON/OFF.
If all items ON, you can enjoy 5.1 channel.
CENTER SPEAKER LARGE
REAR SPEAKER
SMALL
SUBWOOFER
OFF
-- SPEAKER SETUP PAGE -DOWNMIX
FRONT SPEAKER
CENTER SPEAKER
REAR SPEAKER
SUBWOOFER
LARGE
SMALL
OFF
-- SPEAKER SETUP PAGE -DOWNMIX
FRONT SPEAKER
CENTER SPEAKER
REAR SPEAKER
SUBWOOFER
ON
OFF
2. Setup DOLBY DIGITAL
• Select the DOLBY output level off is the maximum
output.
3. Setup CHANNEL DELAY
-- AUDIO SETUP PAGE -SPEAKER SETUP
DOLBY DIGITAL
CHANNEL DELAY
EQUALIZER
3D PROCESSING
FULL
3/4
1/2
1/4
OFF
-- AUDIO SETUP PAGE -SPEAKER SETUP
DOLBY DIGITAL
CHANNEL DELAY
EQUALIZER
3D PROCESSING
17
4. Setup EQUALIZER
Setup Equalizer can ajust sound quality including BASS,
SUPPER BASS and TREBLE.
-- EQUALIZER PAGE -BASS BOOST ON
SUPPER BASS
OFF
TREBLE BOOST
-- EQUALIZER PAGE -BASS BOOST
SUPPER BASS
ON
TREBLE BOOST
OFF
-- EQUALIZER PAGE -BASS BOOST
SUPPER BASS
TREBLE BOOST
ON
OFF
5. Setup 3D PROCESSING
• Setup PROLOGIC II
You can select the PROLOGIC II decoder ON/OFF.
-- AUDIO SETUP PAGE -SPEAKER SETUP
DOLBY DIGITAL
CHANNEL DELAY
EQUALIZER
3D PROCESSING PROLOGIC II
-- 3D PROCESSING PAGE -PROLOGIC II ON
OFF
18
VIDEO SETUP
1. Setup COMPONENT
• Select OFF, the R.G.B. signals will not come out.
• Select RGB, the signals will come out, then the video
mode change to scart mode.
2. Setup TV MODE
• Select INTERLACE, the RGB output format is interlace.
• Select P-SCAN, the RGB output format is non-interlace.
-- VIDEO SETUP PAGE -CVBS
OFF
RGB
QUALITY
RGB
-- VIDEO SETUP PAGE -CVBS
RGB
QUALITY
INTERLACE
P-SCAN
3. Setup QUALITY
• Select this function can adjust video quality, including
SHARPNESS, BRIGHTNESS and CONTRAST.
-- VIDEO SETUP PAGE --
VIDEO QUALITY SETUP
1. SHARPNESS
• Select the menu, when you press ///button can
adjust the SHARPHNESS level.
-- VIDEO SETUP PAGE -SHARPNESS HIGH
2. BRIGHTNESS
• Select submenu of BRIGHTNESS can adjust the value
by pressing /.
3. CONTRAST
• Select submenu of CONTRAST can adjust the value
by pressing /.
COMPONENT
TV MODE
SHARPNESS
QUALITY
BRIGHTNESS
CONTRAST
BRIGHTNESS
CONTRAST
MEDIUM
LOW
-- VIDEO SETUP PAGE -SHARPNESS
BRIGHTNESS 00
CONTRAST
-- VIDEO SETUP PAGE -SHARPNESS
BRIGHTNESS
CONTRAST 00
19
PREFERENCE SETUP
• Press /button to select PREFERENCES SETUP and press ENTER. The left is main
catalog, the right is the children catalog.
• Press /button to enter the children catalog and press ENTER to confirm.
1. Setup TV TYPE
• If the TV set is PAL, please select PAL.
• If the TV set is MULTI, please select MULTI.
• If the TV set is NTSC, please select NTSC.
• The unit will output the TYPE you select.
2. Setup the AUDIO
• The audio set up allows access to the audio languages
available onthe disc.
For example, if the disc has English and French audio
format available, you can only select English or French.
3. Setup the SUBTITLE
• Select the sub-title languages avaliable on current DVD
title.
4. Setup the DISC MENU
• Select the disc menu subtitle languages as available
on current DVD title.
20
-- PREFERENCE PAGE -TV TYPE
PAL
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
MULTI
NTSC
-- PREFERENCE PAGE -TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
ENGLISH
FRENCH
GERMAN
SPANISH
DANISH
SWEDISH
-- PREFERENCE PAGE -TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
ENGLISH
FRENCH
GERMAN
SPANISH
DANISH
SWEDISH
OFF
-- PREFERENCE PAGE -TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
ENGLISH
FRENCH
GERMAN
SPANISH
DANISH
SWEDISH
5. Setup the PARENTAL
• When playback with the parent lock function disc, can
use the PARENTAL to control and with the password
(password: 1234)
6. Setup the DEFAULTS
• If you do not want to save all of the set up by
yourself, select it. The DVD receiver will resume
the deference of just leave the factory.
On SETUP Menu, press “DEFAULT” button on
remote, the operation is same as above.
PASSWORD SETUP
• Change setup the new password, first enter “CHANGE”,
and appear the change menu, input the original “1234”,
move to the new pass, input the new password and
press ENTER to confirm. If you select the password
on, that you can change the parental will ask for
password.
-- PREFERENCE PAGE -TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
1 KID SAF
2G
3 PG
4 PG13
5 PGR
6R
7 NC17
8 ADULT
-- PREFERENCE PAGE -TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
RESET
-- PASSWORD SETUP PAGE -PASSWORD MODE ON
PASSWORD
OFF
-- PASSWORD SETUP PAGE -PASSWORD MODE
PASSWORD CHANGE
21
TROUBLE SHOOTING
Check the following guide for the possible cause of a problem before contacting service.
Symptom
No Power
Correction
Cause
• The power cord is disconnected. • Plug the power cord into the wall
outlet and unit securely.
• Insert a disc. (Check that the DVD or auThe power is on, but DVD • No disc is inserted.
dio CD indicator in the DVD display is lit.)
player does not work
• The TV is not set to receive DVD • Select the appropriate video input mode
No Picture
on the TV so the picture from the DVD
signal output.
player appears on the TV screen.
• The video cable is not connected • Connect the video cable into the
jacks securely.
securely.
• The connected TV power is turned off. • Turn on the TV.
• The DVD has selected P-SCAN • Select TV to P-SCAN mode or enter
DVD to setup mode and press DEmode, TV does not support.
FAULT button on the remote
• The equipment connected with the • Select the correct input mode of the
No Sound
audio receiver so you can listen to the
audio cable is not set to receive
sound from the DVD player.
DVD signal output.
• The audio cable is not connected • Connect the audio cable into the
jacks securely.
securely.
• The power of the equipment connected • Turn on the equipment connected with
the audio cable.
with the audio cable is turned off.
• The Digital Audio Output is set to • Set the Digital audio Output to the correct
position, then turn on the DVD player
the wrong position.
again by pressing the POWER button.
• Clean the disc.
The playback picture is poor • The disc is dirty.
• Insert a disc
The DVD player does • No disc is inserted.
• Insert a playable disc. (Check the disc
not start playback
• An unplayable disc is inserted.
type, color system and Regional code.)
• The disc is placed upside down. • Place the disc with the playback side down.
• The disc is not placed with the • Place the disc on the disc tray correctly inside the guide.
guide.
• Clean the disc.
• The disc is dirty.
• Press the SET UP button to turn off
• A menu is on the TV screen.
the menu screen.
• Cancel the Rating function or change
• The Rating level is set.
the rating level.
The Remote Control • The remote control is not pointed at • Point the remote control at the remote
sensor of the DVD player.
the remote sensor of the DVD player.
does not work properly
• The remote control is too far from • Operate the remote control within
about 23ft (7m).
the DVD player.
• There is an obstacle in the path of the • Remove the obstacle.
remote control and the DVD player.
• The batteries in the remote con- • Replace the batteries with new ones.
trol are exhausted.
22
SPECIFICATION
GENERAL
Power source
Power consumption
Mass
External dimensions (WxHxD)
Operating conditions
Operation status
Operating humidity
AC 230V 50Hz
120W
3.8Kg
430 X 354 x 60 mm
Temperature: 5°C to 35°C
Horizontal
5% to 90%
CD/DVD
Laser
Signal system
Frequency response (audio)
Signal to noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Semiconductor laser, wavelength 650nm
Pal 650/50, NTSC 525/60
4Hz to 20 KHz
More than 90dB (1KHz, NOP, 20KHz LPF/A-Filter)
More than 95dB
0.2% (1KHz, at 12W position)
VIDEO
Video output
S-Video output
1.0V (p-p), 75 ohm, negative sync., RCA jack
(Y) 1.0V (p-p), negative sync., Mini DIN 4-pin x 1
(C) 0.3V (p-p), 75 ohm
TUNER
Tuning Range (FM)
Intermediate Frequency (FM)
Signal to noise Ratio (FM)
Frequency Response
Tuning Range (MW)
Intermediate Frequency (MW)
87.5 - 108.0 MHz
10.7 MHz
50dB
150 - 1200 Hz
522 - 1620 kHz
450 kHz
AMPLIFIER
Stereo mode
Surround mode
Inputs
SPEAKERS
Type
Impedance
Frequency Response
Sound Pressure Level
Rated Input Power
Max. Input Power
Net Dimension (WxHxD)
15W + 15W (4 ohm)
Front : 15W + 15W (4 ohm)
Center : 15W (4 ohm)
Surround : 15W + 15W (4 ohm)
Subwoofer : 25W (6 ohm)
Audio
Satelite Speaker
1 Way 5 Speaker
4 ohm
120 - 20000Hz
84 dB/W (1m)
15W
30W
91x105x140mm
* Design and specification are subjuect to change without notice.
23
Super Woofer
1 Way 1 Speaker
6 ohm
20Hz - 300Hz
25W
50W
170x243x291mm
ALL RIGHTS RESERVED
COPY RIGHT DENVER ELECTRONICS A/S
www.denver-electronics.com
24