Vertical Edge 5000i Gig-E IP Phone™ Bluetooth Module Set Up and

Vertical Edge 5000i Gig-E IP Phone™
Bluetooth Module Set Up and
Configuration Guide
Last Updated 8/20/2013
Vertical Communications, Inc. reserves the right to revise this publication and to make
changes in content without notice.
© 2013 by Vertical Communications, Inc. All rights reserved.
This publication contains proprietary and confidential information of Vertical
Communications, Inc. The contents of this document may not be disclosed, copied or
translated by third parties, in any form, or by any means known, or not now known or
conceived, without prior explicit written permission from Vertical Communications, Inc.
LIMIT OF LIABILITY/DISCLAIMER OF WARRANTY
Vertical Communications, Inc. makes no representation or warranties with respect to the
accuracy or completeness of the content of this publication and specifically disclaims
any implied warranty of merchantability or fitness for any particular purpose, and shall
not be liable for any loss of profit or any other commercial damage, including but not
limited to, special, incidental, or consequential.
TRADEMARKS
Vertical Communications and the Vertical Communications logo and combinations
thereof, and Wave Global Administrator are registered trademarks of Vertical
Communications, Inc. All other brand and product names that appear in this publication
are used for identification only and are the property of their respective holders.
Contents
Bluetooth Module ......................................................................................................................................... 1
Bluetooth Module Installation ...................................................................................................................... 2
Bluetooth Module Installation Steps ........................................................................................................ 2
Bluetooth Configuration Menu ..................................................................................................................... 5
Start Bluetooth Set Up.............................................................................................................................. 5
Pair Your Headset ..................................................................................................................................... 5
Pair an Unpaired Headset .................................................................................................................... 6
Connect or Disconnect a Paired Headset ................................................................................................. 8
Delete a Paired Headset ........................................................................................................................... 9
Add a Paired Smart Phone ........................................................................................................................ 9
Connect or Disconnect a Paired Smart Phone ................................................................................... 13
Settings ................................................................................................................................................... 15
Smart Phone Ring Type ...................................................................................................................... 15
Smart Phone Reconnection................................................................................................................ 16
CO Access Code .................................................................................................................................. 16
Discoverable ....................................................................................................................................... 17
Device Name ...................................................................................................................................... 18
Local Device Info ................................................................................................................................ 18
Connected Device Info ....................................................................................................................... 19
Using the Bluetooth Headset ...................................................................................................................... 20
Receive a Call using your Bluetooth Headset..................................................................................... 20
Disconnect a Headset Call .................................................................................................................. 20
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
i
Change the Sound Path from the Bluetooth Headset to the Handset or Hands-free ....................... 20
Change the Headset Receive volume of the Bluetooth headset ....................................................... 20
Using the Smart Phone ............................................................................................................................... 21
Answer or Refuse a Smart Phone Call on your Edge 5000i Gig-E IP Phone ....................................... 21
Transfer or End a Call ......................................................................................................................... 21
Change the Speaker Volume of a Call ................................................................................................ 22
Change the Ring Volume of a Call ...................................................................................................... 22
Answer a Call Using the Smart Phone ................................................................................................ 23
Make a Smart Phone Call .................................................................................................................. 23
Phone Book Directory ........................................................................................................................ 24
Phone Book Directory – Make a SIP Call ............................................................................................ 25
Synchronize an Edge 5000i Gig-E IP Phone and a Smart Phone to Update Both Phone Books......... 26
Search Your Phone Book .................................................................................................................... 27
Bluetooth Module Troubleshooting ........................................................................................................... 29
Bluetooth Connectivity ........................................................................................................................... 29
Bluetooth Pairing .................................................................................................................................... 29
Bluetooth Module Initialization.............................................................................................................. 30
Bluetooth Module Upgrade.................................................................................................................... 31
Re-Pairing a Smart Phone ....................................................................................................................... 33
Bluetooth Compatible Head Sets – August, 2013 ....................................................................................... 34
Bluetooth Compatible Smart Phones – August, 2013 ................................................................................ 35
ii
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
Bluetooth Module
The Bluetooth Module, with new status lights, is externally mounted on the Edge 5000i Gig-E IP
Phone and provides new Bluetooth technology that is compatible with a wide variety of
headsets and smart phones. The Bluetooth Module supports Bluetooth Version 2.1 + EDR1.
IMPORTANT: At present, the Bluetooth Module works only with the following Edge 5000i Gig-E
IP phone models:
•
Edge 5000i-LLCDG
•
Edge 5000i-24G
This guide provides installation, set up, configuration, and some basic steps on how to take
advantage of all the benefits offered by the Bluetooth Module.
See the Bluetooth Module Installation section of this guide for detailed instructions on how to:
•
Install the Bluetooth Module on the Edge 5000i Gig-E IP Phone desk phone
•
Perform an initial Bluetooth headset configuration
This guide also describes how to:
•
Make and receive calls with a Bluetooth module enabled Edge 5000i Gig-E IP Phone
•
Use the Edge 5000i Gig-E IP Phone as an audio path for your smart phone calls
•
Pair your Bluetooth functionality with your headset and smart phone.
•
Use your Edge 5000i Gig-E IP Phone to dial external numbers out of the paired
smart phone's phone book.
Rounding out this guide is a Bluetooth Module Troubleshooting section that includes helpful
hints on how to verify that your installation is working properly.
At the end of the Edge 5000i Gig-E IP Phone – Bluetooth Module Set Up and Configuration
Guide are lists of wireless headsets and smart phones that are currently compatible with the
Bluetooth Module on the Edge 5000i Gig-E IP Phone. Please see the Bluetooth Compatible
Head Sets and the Bluetooth Compatible Smart Phones sections.
1
EDR is Enhanced Data Rate, an optional element of the Bluetooth specification. If a Bluetooth device in a
Bluetooth data connection supports EDR, the EDR mode is used automatically.
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
1
Bluetooth Module Installation
The Bluetooth module uses a 12-PIN female connector to connect the DSS interface of
the 24-button Vertical Edge 5000i Gig-E IP Phone and the RJ-9 Headset Port. Figure 1
depicts the DSS and Headset Port locations.
Figure 01.
Bluetooth module with DSS and Headset ports.
Bluetooth Module Installation Steps
Using the correct port configuration depicted in Figure 1, plug the 12-Pin DSS interface
to the DSS interface of the Edge 5000i Gig-E IP Phone. Plug in the RJ-9 connector to
the Bluetooth module port and to the Headset port of the Phone. The front of the Edge
5000i Gig-E IP Phone should look like the illustration in Figure 2.
Notice how the slim, unobtrusive Bluetooth module nests on the right side of the phone
next to the keyboard.
2
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
Figure 02.
Bluetooth module correctly inserted for installation.
Using a Philips screw driver, attach the Bluetooth module to the back of the Edge 5000i
Gig-E IP Phone. See Figure 3 below.
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
3
Figure 03.
Bluetooth module correctly attached.
Turn on the Edge 5000i Gig-E IP Phone and verify that the Bluetooth indicator icon
appears on the LCD screen in the upper left panel as illustrated in Figure 4.
Figure 04. LCD with the Bluetooth icon shown in upper left next
to the connected icon.
4
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
Bluetooth Configuration Menu
When the Bluetooth Module is installed successfully, use the phone screen to configure
the Bluetooth and wireless devices with the Edge 5000i Gig-E IP Phone.
Start Bluetooth Set Up
To set up the Bluetooth Dongle, select:
1. Settings in the main menu.
2. From the Settings menu, select Bluetooth.
Note: The menu number may be different, but the Setting categories will include
Bluetooth.
Pair Your Headset
When Bluetooth opens, you can pair your headset from the main Bluetooth screen:
1. Select Headset.
Figure 05.
Bluetooth icon shown in upper left next to the connected icon
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
5
Pair an Unpaired Headset
When a Head Set has not been paired, your Edge 5000i Gig-E IP Phone will indicate No
Paired Headset on the screen as shown below.
Figure 06.
No Paired Headset
1. When there is no paired device, press Search.
Figure 07.
Searching Device
2. If there is no discoverable headset, the screen displays No Searched Device.
Figure 08.
3.
6
No Searched Device
If you get the message No Searched Device, as depicted above, press Search
again.
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
4. When a device or devices appear, use the Navigation Up/Down key on your
Edge 5000i Gig-E IP Phone to locate the specific wireless device headset from
the list and press Connect in the lower right of the phone screen .
Figure 09.
Searched Device List
The Edge 5000i Gig-E IP Phone screen will state that it is connecting the
Bluetooth device as depicted below.
Figure 10.
Connecting Device – Wireless Headset
When the headset is connected successfully, the Edge 5000i Gig-E IP Phone
displays Headset is connected, as shown below.
Figure 11.
Headset is Connected
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
7
When the headset is connected, the headset icon displays on the top bar and the
lower LED of the Bluetooth module is lighted blue as shown below.
Figure 12.
Bluetooth Module Lights Blue When Wireless Headset is Connected
Connect or Disconnect a Paired Headset
If a device is paired but it is disconnected, to connect this device:
1. Press Connect.
Figure 13.
Paired Headset List
If a device is paired but it is connected, to disconnect this device:
1. Press Disconn, as illustrated below.
8
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
Figure 14.
Paired Headset List with Disconn
Delete a Paired Headset
If the headset is connected, you need to disconnect it first before deleting it. Ensure that
you have completed Step 2 in the previous section, Connect or Disconnect a Paired
Headset.
To delete a disconnected paired device:
1. Press the Navigation Right key.
2. Press Delete.
Figure 15.
Paired Headset List with Delete
Add a Paired Smart Phone
To add your Smart Phone, it is important to pair it with Bluetooth. A quick way to
determine if the smart phone is paired is to do a search. If the Smart Phone is not
paired, the result of your search will be No Paired Smart Phone, as shown below.
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
9
Figure 16.
Smart Phone is not Paired.
1. When there is no paired device, Select Search.
Figure 17.
Searching Device.
2. If there is no discoverable Smart Phone, the screen displays No Searched
Device as shown below.
Figure 18.
No Searched Device
3. If you get the message No Searched Device, press Search again.
If the list returns the list and your phone is not on the list, Press Search again.
4. When the list reflects your Smart Phone, select the correct phone by pressing the
Navigation Up/Down key.
10
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
Figure 19.
Searched Device List
5. Press Connect. The phone screen states that it is connecting the device.
Figure 20.
Connecting Device – Smart Phone
When connected, the Edge 5000i Gig-E IP Phone screen field displays Smart
Phone is connected and the Smart Phone icon displays in the upper left
Connection panel as shown below.
Figure 21.
Smart Phone is Connected
When a Smart Phone is connected, the middle LED on the Blue tooth module will
light blue as shown in the figure below.
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
11
Figure 22.
12
Middle Blue Light Indicates Smart Phone is Connected
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
Connect or Disconnect a Paired Smart Phone
To connect to a paired device that is disconnected:
1. Press Connect.
Figure 23.
Paired Smart Phone with Connect
To disconnect to a paired device that is connected:
1. Press Discon.
Figure 24.
Paired Smart Phone with Connect
To delete a device that is paired but is disconnected:
2. Press the Navigation Right key.
3. Press Delete, as illustrated below.
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
13
Figure 25.
Paired Smart Phone with Delete
To delete a connected smart phone, you must first disconnect the smart phone:
1. Press the Navigation Right key.
2. Press Disconn.
Figure 26.
14
Paired Smart Phone with Disconn
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
Settings
Customize your Smart Phone and Bluetooth connection. The configurable settings are:
•
Smart Phone Ring Type
•
Smart Phone Reconnection
•
CO Access Code
•
E-BTMU Discoverable
•
Device Name
•
Local Device Info
•
Connected Device Info
Figure 27.
Settings Categories
Smart Phone Ring Type
There are the 8 types of ring for the smart phone.
Figure 28.
Smart Phone Ring Type
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
15
To listen to each ring type and choose your ring type to use when the smart phone call is
received:
1. Press the Navigation Up/Down key.
2. Press Play.
3. Press OK to select a ring type
The phone uses the default ring if you select Default Ring, and the phone does not play
a ring tone if you select Ringer Off.
Smart Phone Reconnection
If the reconnection mode is enabled, the Bluetooth module automatically attempts to
connect to the last connected headset or Smart Phone.
Figure 29.
Smart Phone Reconnection
CO Access Code
The CO Access Code allows you to specify the external access code used to make calls
to external numbers. This is the same access code that you use on the Edge 5000i GigE IP Phone to dial an external number. Enter the appropriate access code to allow your
phone to dial external numbers from the smart phone's phone book.
You can set the CO Access Code using the menu shown below.
16
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
Figure 30.
CO Access Code
Discoverable
A guest user can pair their mobile phone and use an Edge 5000i Gig-E IP Phone to
handle their calls over the mobile network. In a business situation, such as hoteling,
where someone needs to have use of an Edge 5000i Gig-E IP Phone but it is not
assigned to them, you can select the Discoverable menu. If you select this menu, your
phone is visible to other smart phones and your phone can be paired by the smart
phones as long as this menu is displayed.
Figure 31.
Discoverable
Note: While the Bluetooth module is visible, the red LED of Bluetooth module is
flickering.
If the Edge 5000i Gig-E IP Phone is already connected to another Bluetooth device, then
you will see an error message on the display when you set discoverable mode. Make
sure to disconnect the connected device before setting the discoverable mode, as
illustrated below.
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
17
Figure 32.
Disconnect Device First
Device Name
You can change the Bluetooth module name in this menu.
Figure 33.
Device Name
Local Device Info
You can check the Bluetooth module version and the MAC address with this menu.
Figure 34.
18
Local Device Info
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
Connected Device Info
In this menu, you can check the information of the connected device.
Figure 35.
Connected Device Info
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
19
Using the Bluetooth Headset
If the Bluetooth headset is connected to the phone, you can make or receive a call via
Bluetooth headset.
Receive a Call using your Bluetooth Headset
To receive a call using your Bluetooth headset:
1. Press the Headset key on the phone.
or
2. Press the main key in your Bluetooth headset.
Disconnect a Headset Call
To disconnect a call using your Bluetooth headset:
1. Press the Headset key again.
or
2. Press the main key in your Bluetooth headset.
Change the Sound Path from the Bluetooth Headset to the Handset or Hands-free
To change the sound path from the Bluetooth headset to the handset or hands-free
1. Lift-up the handset.
or
2. Press the speaker key.
Change the Headset Receive volume of the Bluetooth headset
Press the volume Up/Down key using the Bluetooth headset to modify the volume of the
call.
20
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
Using the Smart Phone
If your phone is connected to the smart phone, you can make or receive a smart phone
call via your Edge 5000i Gig-E IP Phone. The call still uses your smart phone, but the
audio path can be redirected to the handset to use the speakerphone or handset of your
Edge 5000i Gig-E IP Phone. You may handle only one call type at a time on the phone.
If you are already on a call over the Edge 5000i Gig-E IP Phone, you cannot make or
receive a call over Bluetooth from the smart phone. If you are already in a Bluetooth call
through the smart phone, then you cannot make another call over the Edge 5000i Gig-E
IP Phone.
Answer or Refuse a Smart Phone Call on your Edge 5000i Gig-E IP Phone
When you receive a smart phone call the phone extension icon will indicate that the
phone is ringing. You can receive the smart phone call by any of the following:
•
Pressing the speaker button
•
Lifting up the handset
•
Pressing Answer soft button
If you press the Refuse soft button, the call is rejected.
Figure 36.
Soft Keys for Answer and Refuse a Smart Phone Call
Transfer or End a Call
During a smart phone call that you’ve answered on your handset, you can transfer the
call back to your smart phone by pressing the A.Trns soft button. The call is transferred
to the smart phone and your handset phone is changed to the idle state. Also, if you
select the Bluetooth button in the smart phone and the call is transferred back to your
Edge 5000i Gig-E IP Phone again.
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
21
If you press the EndCall soft button, the call is disconnected.
Figure 37.
Soft Keys for Transfer – A.Trns and End a Call – EndCall
Change the Speaker Volume of a Call
The sound level increase or decrease is reflected in the Speaker Volume value and the
filled rectangle in the volume bar range, as illustrated below.
Figure 38.
Speaker Volume Value and Range
Change the Ring Volume of a Call
When the phone is ringing you can change the ring volume by pressing the volume
button. The phone number extension icon is off the hook and indicates that the call is in
progress, as illustrated below.
22
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
Figure 39.
\Ring Volume Value and Range
Answer a Call Using the Smart Phone
When the Edge 5000i Gig-E IP Phone is ringing, you can answer the call by using your
smart phone, the call is connected to either the smart phone or the Edge 5000i Gig-E IP
Phone according to the smart phone type.
•
•
iPhone (iOS): The received call is connected to your smart phone.
Android phone: The received call is connected to your IP phone.
Make a Smart Phone Call
To make a Smart Phone call, in the idle state:
1. Press the Navigation Right button.
2. Press the SP.Call soft button as illustrated in the figure below.
Figure 40.
SP.Call Soft Button
3. Place the call by using any of the following three methods:
a. Press the Redial soft button to call the last outgoing number again, as
illustrated below.
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
23
Figure 41.
Redial Soft Button
b. Input a phone number and press the Call soft button
Figure 42.
Redial Soft Button
c. Off-hook the handset.
To cancel a call:
1. Press the Cancel soft button. The phone returns to the idle state.
Phone Book Directory
When your phone is connected to the smart phone, the phone book of the smart phone
can be downloaded to your Edge 5000i Gig-E IP Phone if you permit access, using the
handset phone screens.
1. Select Directory.
2. Select Smart Phone.
If the phone book is empty, it displays PhoneBook – No Data, as illustrated below.
24
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
Figure 43.
Smart Phone PhoneBook – No Data.
If you have any item on your phone book, you will see the PhoneBook list as illustrated
in the figures below.
Figure 44. Edge 5000i-LLCDG Displays Smart Phone Book –
Contacts List.
Figure 45. Edge 5000i-24G Displays Smart Phone Book –
Contacts List.
Phone Book Directory – Make a SIP Call
1. Press the Dial soft button to make a SIP call via network.
For an external call, ensure that the CO access code is set correctly, as
illustrated below.
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
25
Figure 46.
CO Access Code
2. Press the Navigation Right key then press the SP.Call soft button to make a
call via your smart phone.
Synchronize an Edge 5000i Gig-E IP Phone and a Smart Phone to Update Both Phone
Books
After you have completed the initial smart phone data download during set up, you can
keep your phone books current by synchronizing your smart phone with the Edge 5000i
Gig-E IP Phone. Synchronizing the two phones will update any data changes, additions,
or deletions that you have made on either phone book. To synchronize your phones:
1. Press the Navigation Right key.
2. Press the Download soft button to open the following screen:
Figure 47.
Allow PB Access
If you can see the message for the phonebook access in your smart phone, to
synchronize the two phone books, you need to grant the access right to download your
phone book from your smart phone.
26
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
If you allow the access, the phone book will be downloaded from your smart phone to
your Edge 5000i Gig-E IP Phone and will report the download and ask you to wait a
moment, , as illustrated below.
Figure 48.
Phonebook is Downloading – Wait a Moment.
After downloading and synchronizing the phone books, the Edge 5000i Gig-E IP Phone
screen returns to the phone book list.
Search Your Phone Book
You can also search the name or number in the phone book.
1. Press the Find soft button.
Figure 49.
The Find Soft Button
2. Input the searched name or number.
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
27
Figure 50.
Search for Input Screen
3. Press the OK soft button.
28
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
Bluetooth Module Troubleshooting
This section describes common Bluetooth functionality to check if a problem occurs.
Bluetooth Connectivity
If the Bluetooth Module power light is not on and the Bluetooth connection icon does not
appear in the display, ensure the following cables are installed properly as depicted
below:
• The DSS connector cable is firmly connected to the DSS interface of the Edge
5000i Gig-E IP Phone and
• The headset cable is properly plugged in to the correct port.
Figure 51.
Bluetooth module with correct ports and phone jack connectivity.
If the DSS cable is not connected, you will have no power light and the Bluetooth
connection icon will not appear in the display. If the headset cable is not properly
connected, then you will have no audio.
Bluetooth Pairing
Verify that the Edge 5000i Gig-E IP Phone is properly paired with the Bluetooth-enabled
devices. The Bluetooth Module will pair with most Bluetooth devices, but there are
exceptions depending on some devices’ support levels of Bluetooth standards. This
Bluetooth Module supports Bluetooth Version 2.1 + EDR1. See the current lists of tested
devices in the Bluetooth Compatible Head Sets and Bluetooth Compatible Smart
Phones sections below.
1
EDR is Enhanced Data Rate, an optional element of the Bluetooth specification. If a Bluetooth device in a
Bluetooth data connection supports EDR, the EDR mode is used automatically.
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
29
Bluetooth Module Initialization
If you initialize the Bluetooth module with this menu, the settings below should be the
default value:
•
All paired and connected device lists are deleted.
•
Smart phone reconnection: Disabled
•
Ring type: Default Ring
•
Smart phone hands-free volume: 6 of 11
•
Smart phone handset volume: 6 of 11
To initialize your Bluetooth module:
1. Press Yes.
Figure 52.
30
Bluetooth Initialization Verification – Yes Button
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
Bluetooth Module Upgrade
The Bluetooth module can be upgraded via ftp server using the Bluetooth connection.
However, do not use this upgrade option unless specifically directed to do so by Vertical
Technical Support or your authorized Vertical dealer. If you receive direction to conduct
an upgrade, below are the steps to follow.
Figure 53.
E-BTMU Upgrade
If you enter this menu, you can check the current version.
1.
Press Upgrade in this menu to search a FTP server.
A list appears. The FTP server is indicated by a solid triangular arrow to the left
of the FTP server name as illustrated below.
Figure 54.
Search and Find FTP Server
2. Press the Upgrade soft key to start the upgrade. A screen appears stating that
there is an attempt to download the S/W Upgrade as illustrated below.
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
31
Figure 55.
Upgrade Download Attempt Message
The S/W image will download, if a new S/W image version is found.
When the download begins a second message appears that displays the
percentage of download as it occurs, as illustrated below.
Figure 56.
S/W Download Progress Message
The phone will write new firmware into flash memory and will state that it is
programming the S/W and not to stop the process, as illustrated below.
Figure 57.
32
S/W Programming – Don’t Power Off Message
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
The Bluetooth module is rebooted after successful upgrade.
Figure 58.
Bluetooth Upgrade Update OK
Check the version by:
1. Select Settings.
2. Press Local.
3. Press Device Info.
Re-Pairing a Smart Phone
Re-pairing a Smart Phone is the same process as re-pairing a headset.
1. Use Search until you locate your smart phone. When it is discovered:
a. Select your Smart Phone that is displayed on the phone screen.
b. Press the Navigate Left key.
c. Press Add as shown in the figure below.
Figure 59.
Add a Smart Phone.
2. You can search and add another smart phone using these same two steps.
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
33
Bluetooth Compatible Head Sets – August, 2013
Plantronics M20
Plantronics M50
Motorola S10
Samsung HM1700
Jabra BT2045
Jabra Easygo
JayBird BlueBuds X Sport
Motorola HK100
Sony DR-BT140Q
BlueAnt BlueAnt z9i
LG HBM-260
34
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
Bluetooth Compatible Smart Phones – August, 2013
LG Optimus view
LG Optimus LTE2
Samsung Galaxy note
Samsung Galaxy S3
Apple iPhone 4S
Pantech Vega racer 2
Motorola Atrix OK
Motorola Droid RAZR
Apple iPhone 5
HTC Desire
Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide
35