C52_pg_062
8/7/07
2:41 PM
Page 62
Home Theater
section
3
12dB/Octave Crossover
Cloth Backed
Micro-Perforated Grill
Tuned Ported Enclosure
3
Home Theater
Amplifiers . . . . . .67, 69,
70, 83, 85
Audio-Technica . . . . . .78
Audioplex Technology . .77
AudioSource . . . . .63, 64,
82, 83
Breathe Audio . . . . . . .69
CD Players . . . . . . . . .84
Ceiling Speakers . .62~64,
69~71
D/A Convertor . . . . . . .78
DVD Players . . . . . . . .84
Equalizers . . . . . . . . . .84
Indoor/Outdoor
Speakers . .67, 71, 80, 79
Infrared Repeaters . . .72,
75~77
In-Wall Speakers . .62~65,
69, 71
Jobsite . . . . . . . . .70~73
MCM Custom
Audio . . . . .62~68, 76~82
MG Electronics . . . . . .79
Phono Preamplifiers . . .78
Pyle . . . . . . . . . . . . . .85
Pyramid . . . . . . . . . . .85
Receivers . . . . . . .84, 85
Sherwood . . . . . . .84, 85
Speaker
Brackets/Stands . . . . . .81
Speaker
Distribution . . . . . .66~68
SpeakerCraft . . . . .74~76
Speco Technologies . . .64,
65, 79
Subwoofers . . . .63~65, 82
Turntables . . . . . . . . . .78
Volume Controls . .65, 67,
68, 73, 74, 76, 79
61⁄2" Two–Way
In–Wall
Speaker Pair
Features: •6.5"
woofer •Titanium
dome tweeter
•Damped
diaphragm and
suspension with
ferro–fluid cooling
Specifications:
•Power capacity:
30W/60W RMS/peak •Frequency response:
60Hz~20KHz •Impedance: 8ohm •SPL: 89dB (W/M)
Dimensions: •Outer frame: 12" (H) x 85⁄8" (W)
•Required cutout: 113⁄4" (H) x 73⁄8" (W) •Mounting
depth: 33⁄4" •Sold in pairs
Order #
50-7330A
(1–3 prs.)
$109.00
Woven Kevlar Cone with
Rubber Surround
Polyfil Damped Rear Enclosure
Premium Series
In-Wall and Ceiling Speakers
These speaker systems are perfect for background and foreground music applications in a single
room, or throughout the house. Above average power handling and wide frequency response also
makes them suitable as front, center or rear surround speakers in home theater installations.
Configurations include 61⁄2" and 8" in-wall and ceiling versions.
Features: •Specially designed internally damped back box •Front ported enclosure (in-wall models)
•Separately available pre-construction brackets •12dB/octave crossover •Pivotal tweeter •Gold
plated push terminal connectors which accept up to 14AWG wire •+3, +0 and -3db high frequency
selector •+3, +0 and -3db midrange frequency selector (three-way model) •Woven Kevlar® cone
woofer with butyl rubber surround •Attractive cloth backed micro-perforated grill •All models
sold in pairs
8" Three-Way
In-Wall
Speaker Pair
(4 prs.–up)
$98.10
61⁄2" Two–Way Ceiling Speaker Pair
Features: •61⁄2" woofer • •3⁄4" silk dome pivotal
tweeter •Damped diaphragm and suspension
with ferro–fluid cooling Specifications: •Power
capacity: 25W/60W RMS/peak •Frequency response:
75Hz~20KHz •Impedance: 8ohm •SPL: 88dB (W/M)
Dimensions: •Outer frame diameter: 9" •Required
cutout: 71⁄2" diameter •Depth: 51⁄2" •Sold in pairs
Order #
50-7325A
(1–3 prs.)
$109.00
(4 prs.–up)
$98.10
Features:
•8” woofer
•Mylar dome
21⁄2" midrange
•Titanium
dome, coaxially
mounted 1"
tweeter
•Damped
diaphragm and suspension with ferro-fluid
cooling Specifications: •Power capacity:
40W/100W RMS/peak •Frequency response:
45Hz~20KHz •Impedance: 8ohm •SPL: 89dB (W/M)
Dimensions: •Outer frame: 141⁄2" (H) x 10" (W)
•Required cutout: 123⁄4" (H) x 81⁄2" (W) •Mounting
depth: 33⁄4" •Sold in pairs
Order #
50-7331A
(1-3 prs.)
$179.00
(4 prs.-up)
$165.93
8" Two–Way Ceiling Speaker Pair
Features: •8" woofer •3⁄4" silk dome pivotal tweeter
•Damped diaphragm and suspension with ferro–fluid
cooling Specifications: •Power capacity: 35W/80W
RMS/peak •Frequency response: 45Hz~20KHz
•Impedance: 8ohm •SPL: 89dB (W/M) Dimensions:
•Outer frame diameter: 11" •Required cutout:
93⁄8" diameter •Depth: 7" •Sold in pairs
Order #
50-7326
(1–3 prs.)
$125.00
(4 prs.–up)
$115.88
NET 30
Terms
62
Order Online
www.mcmelectronics.com
Pre–Construction Speaker Bracket Pairs
Rugged ABS and perforated sheet metal bracket assemblies greatly ease installation
of in–wall and ceiling speakers in new construction applications. Simply attach to
wall studs or ceiling joists, prior to drywall installation, for easy location and secure
mounting of speaker systems during final installation. All models are sold in pairs.
Compatibility: •#50-6681A,
Min.
50-6682A: All MCM Custom
SpeakerSpeaker Stud
Audio and most other brand
Order # Type Size Opening Width (1-3 prs.)(4 prs.-up)
in–wall models •#50-6686A,
50-6681A In-wall 61⁄2" 103⁄4" x 73⁄8" 131⁄2" $19.95 $18.50
50-6687A: All MCM Custom
50-6682A In-wall 8" 123⁄4" x 83⁄4" 141⁄2"
19.95
18.50
Audio ceiling models, with
50-6686A Ceiling 61⁄2"
8"
131⁄2"
19.95
17.96
enclosed back–box •#50-6248,
5
1
50-6687A Ceiling 8"
9 ⁄8"
15 ⁄2"
21.95
19.13
50-6249: All MCM Custom
1
11
1
50-6248 Ceiling 6 ⁄2"
7 ⁄16"
13 ⁄2"
19.95
18.50
Audio and most other brand
7
1
50-6249 Ceiling 8"
9 ⁄16"
15 ⁄2"
19.95
18.50
open back ceiling models
C52_pg_063
8/7/07
2:33 PM
Page 63
Home Theater
Ceiling Mount Speaker Pair with Pivotal Tweeter
Ideal as main speakers, surround sound or remote speaker
applications. Also an excellent choice for background music,
paging and general audio applications. Two-way design includes 1"
mylar dome pivotal tweeter for clean highs, all the way to 20KHz. Pivotal tweeter allows high frequencies to be
focused in the direction of the listening area, instead of directly at the floor. White plastic frame and painted steel
grill compliments any decor. Attached mounting brackets easily mount in ceiling or wall board without the need
for additional hardware. 8ohm. Sold in pairs.
Power Capacity
RMS/Peak
25W/60W
25W/60W
30W/80W
Frequency
Response
80Hz~20KHz
70Hz~20KHz
80Hz~20KHz
SPL
89dB
90dB
90dB
Overall
Frame
Diameter
8"
9"
103⁄4"
61⁄2" Single Point Stereo Ceiling Speaker
Cutout
Hole
61⁄2"
71⁄2"
93⁄8"
Mounting
Price Per Pair
Depth
(1-3)
(4-11)
21⁄2"
$36.95 $33.75
25⁄8"
42.95
39.91
33⁄8"
49.95
46.86
Cutout
Hole
61⁄2"
71⁄2"
93⁄8"
Mounting
Price Per Pair
Depth
(1-3)
(4-11)
21⁄2"
$22.95
$21.58
5
2 ⁄8"
31.95
29.95
33⁄8"
39.95
37.60
(12-up)
$31.50
37.34
43.78
Ceiling Mount Speaker Pair
Low cost dual cone speaker pair is ideal for background music,
paging and general audio applications. White plastic frame and
painted steel grill compliments any decor. Attached mounting
brackets easily mount in ceiling or wall board without the need for
additional hardware. 8ohm. Sold in pairs.
Order #
50-6240
50-6241
50-6242
Speaker
Size
51⁄4"
61⁄2"
8"
Power Capacity
RMS/Peak
15W/30W
15W/30W
20W/40W
Frequency
Response
110Hz~20KHz
100Hz~18KHz
80Hz~20KHz
SPL
90dB
90dB
91dB
Overall
Frame
Diameter
8"
9"
103⁄4"
(12-up)
$20.08
28.25
34.97
Ideal as main speakers, surround sound or remote speaker applications.
Also an excellent choice for use with a subwoofer. Two-way design
includes a 6dB crossover, polymica cone woofer and 1" soft dome
tweeter, for high frequency response up to 20KHz. White plastic frame
and painted steel grill compliments any decor. Attached mounting
brackets easily mount to wall board without the need for additional
hardware. 8ohm. Sold in pairs.
Woofer
Size
51⁄4"
61⁄2"
Power Capacity
RMS/Peak
25W/60W
30W/60W
Frequency
Response
60Hz~20KHz
50Hz~20KHz
SPL
90dB
90dB
Overall Frame
Dimensions
11" x 75⁄8"
12" x 83⁄4"
Cutout
Hole
61⁄2" x 95⁄8"
73⁄8" x 103⁄4"
Compact high
performing
ceiling speaker provides the unique feature of a
pivoting frame, which allows the entire speaker to
be aimed at the listening area. The entire coaxial
driver assembly may be adjusted from 0~30° in
any direction, while still appearing flat in the ceiling.
Features: •31⁄2" treated paper cone woofer •Rubber
surround •1⁄2" mylar dome tweeter, mounted at the
base of the woofer cone for perfect phase alignment
•White textured ABS frame •Perforated white steel
grill Specifications: •Power capacity: 30W/60W
RMS/peak •Frequency response: 80Hz~20KHz
•Impedance: 8ohm •SPL: 89dB (W/M) Dimensions:
•Outer frame diameter: 61⁄2" •Required cutout:
55⁄8" diameter •Mounting depth: 23⁄4" •Sold in pairs
(1-3 prs.)
$59.95
(4-11 prs.)
$54.95
(12 prs.-up)
$49.95
Great things
really do come
in small
packages! This
ultra compact
in-wall speaker system is
designed to virtually disappear in any
room. A rugged 2" full range driver is mounted in an
attractive rectangular faceplate that is the same size
as a standard wall switch or AC outlet. In fact, this
unit actually mounts in a single gang electrical box
or low voltage bracket. When used alone, it is perfect
for voice reproduction in public areas, on kiosks or
retail displays. Used in pairs, and combined with a
subwoofer, it is perfect for any high fidelity audio
application including home theater and whole-house
audio. Specifications: •Power capacity: 10W/20W
RMS/peak •Frequency response: 300Hz~20KHz
•Sensitivity: 85dB (W/M) •Nominal impedance:
8ohm •Front panel dimensions: 45⁄8" (H) x 3" (W)
•Mounting depth: 13⁄4" •Sold individually
Order #
50-7907
(1-3)
$24.95
Versa-Tape Pre-Construction Wire Placement
This perforated tape is ideal for holding low voltage cable in place prior to
drywall installation. It is useful when the exact location of wall plates is
subject to change, or when the cable is installed for long term use, without
immediate installation of a wall plate. It can also be considered a low cost
alternative to pre-construction brackets. 200' roll.
Order #
50-8915
Mounting
Price Per Pair
Depth
(1-3)
(4-11) (12-up)
1
2 ⁄4"
$44.95 $42.18 $34.97
31⁄4"
54.95
46.86
43.78
Micro
In-Wall
Speaker
System
Compact
Eyeball
Ceiling
Speaker
Pair
Order #
50-8790
Unique speaker provides both left and right channels
from a single point, while maintaining complete
channel isolation. Two 1⁄2" mylar dome tweeters are
combined with a dual voice coil polypropylene woofer,
with rubber surround, to offer rich full frequency
response and good stereo imaging from a single point.
White perforated steel grill and ABS frame match
virtually any decor. Attached mounting tabs allow fast
easy mounting in existing wallboard. Easy connection
is made via two sets of color coded push terminals,
which accepts up to 14AWG wire. Specifications:
•Power capacity: 25W/60W RMS/peak per channel
•Frequency response: 70Hz~20KHz •Impedance:
8ohm per channel •Sensitivity: 88dB •Overall frame
diameter: 9" •Required cutout: •71⁄2" •Mounting
depth: 31⁄4" •Sold individually
Order #
51-881
(1-3)
$29.95
(4-11)
$28.07
(12-up)
$26.26
8" Single Point
Stereo Ceiling Speaker
In-Wall Speaker Pairs
Order #
50-6370
50-6371
3
(1-3)
$34.95
(4-up)
$29.95
(4-up)
$23.50
Similar to our highly popular
61⁄2" model (#51-881), this
single ceiling speaker unit
allows connection of both
left and right channels,
while maintaining separation
throughout the rest of the
audio system. It is perfect in larger areas were
separate left/right speaker systems are impractical
or undesired. Rotating quick tabs easily attach to
existing ceiling or wallboard, without the need for
additional hardware. Features: •8" polypropylene
cone, dual voice coil woofer •Rubber surround
•Dual 1⁄2" mylar dome tweeters •White textured
ABS frame Specifications: •Power capacity:
30W/60W RMS/peak, each channel •Frequency
response: 55Hz~20KHz •Impedance: 8ohm per
channel •SPL: 89dB (W/M) Dimensions: •Outer
frame diameter: 103⁄4" •Required cutout: 93⁄8" diameter
•Sold individually
Order #
51-882
(1–3)
$42.95
(4–11)
$39.40
(12–up)
$37.17
8" In-Wall
Subwoofer
The perfect
addition to
in-wall and
small satellite
speaker
systems, this
is a perfect match for the MCM #50-7907 micro
in-wall speaker. The large poly cone woofer with butyl
rubber surround provides low end frequency response
essential for augmenting small in-wall and ceiling
speakers. White steel grill and PVC frame blend
seamlessly into most walls, and may be painted to
match any decor. Specifications: •Recommended
amplifier power: 25W~100W RMS •Frequency
response: 40Hz~200Hz •Impedance: 8ohm •Required
cutout: 83⁄4" (W) x 83⁄4" (H) •Mounting depth: 4"
•Mfr. #AS8SW •Sold individually
Order #
51-783
(1-3)
$69.95
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
63
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
3
Order #
50-6245
50-6246
50-6247
Speaker
Size
51⁄4"
61⁄2"
8"
section
C52_pg_064
8/7/07
2:52 PM
Page 64
Home Theater
section
3
Enclosed 61⁄2"
Single Point Stereo Ceiling Speaker
3
8" Three-Way In-Wall Speaker Pair
This speaker pair combines all of the critical
and most-asked-for features, for an outstanding
price. Features include: •Polypropylene cone
8" woofer with rubber surround and 1.38" voice
coil •2" mylar dome midrange •1" dome pivotal
tweeter with diffraction lens •Independent -0, -3,
and -6dB adjustments for mid and high frequencies
•12dB/octave crossover. The 8" polypropylene
cone woofer offers rich full frequency response,
with lows down to 34Hz, with smooth mid and high
frequencies beyond 20KHz. The coaxially mounted
tweeter and mid/high frequency adjustments allow
perfect tailoring to each specific installation. White
perforated steel grill and ABS frame match virtually
any decor. Included steel mounting frame allows
fast easy mounting in existing wallboard, and is
far superior to typical rotating plastic clips. Color
coded push terminals accept up to 12AWG wire
Specifications: •Power capacity: 75W/150W
RMS/peak •Frequency response: 34Hz~23KHz
•Impedance: 8ohm •Sensitivity: 90dB •Overall frame
dimensions: 141⁄8 x 10" •Required cutout: •123⁄4" x 81⁄2"
•Mounting depth: 31⁄2" •Sold in pairs
Order #
50-6374
(1-3 prs.)
$129.00
(4-11 prs.)
$121.54
Enclosed 61⁄2" Ceiling Speaker Pair
Unique speaker provides both left and right channels
from a single point, while maintaining complete
channel isolation. Fully enclosed rear enclosure
protects speaker from insulation and other debris
when mounted in attic cavity. Features: •Dual 1⁄2"
mylar dome tweeters •Dual voice coil polypropylene
woofer, with rubber surround •White perforated steel
grill and ABS frame •Attached mounting tabs for
easy mounting in existing wallboard •Two pairs of
red/black color coded push terminals to accept up to
14AWG speaker wire Specifications: •Power
capacity: 25W/60W RMS/peak per channel
•Frequency response: 74Hz~20KHz •Impedance:
8ohm per channel •Sensitivity: 89dB •Overall frame
diameter: 91⁄2" •Required cutout: •8" •Mounting
depth: 51⁄2" •Sold individually
Order #
50-9050
(1-3)
$44.95
(4-11)
$42.75
Ideal as main speakers in a home theater system, or
locate throughout the entire structure in whole-house
applications. Designed for good music reproduction,
these are also ideal in voice and paging applications.
Fully enclosed rear enclosure protects speaker from
insulation and other debris when mounted in attic
cavity. Features: •Poly treated cone woofer with
treated foam surround •Pivotal 1" dome tweeter
•White perforated steel grill and ABS frame
•Attached mounting tabs for easy mounting in
existing wallboard •Red/black color coded push
terminals to accept up to 14AWG speaker wire
Specifications: •Power capacity: 25W/60W
RMS/peak •Frequency response: 74Hz~20KHz
•Impedance: 8ohm •Sensitivity: 91dB •Overall
frame diameter: 91⁄2" •Required cutout: 8"
•Mounting depth: 51⁄2" •Sold in pairs
(12-up)
$40.50
Order #
50-9060
(1-3 prs.)
$69.95
(4-11 prs.)
$66.50
(12 prs.-up)
$62.95
Enclosed 8" Ceiling Speaker Pair
Ideal as main speakers in a home theater system, or locate
throughout the entire structure in whole-house applications.
Designed for good music reproduction, these are also ideal in
voice and paging applications. Fully enclosed rear enclosure
protects speaker from insulation and other debris when mounted
in attic cavity. Features: •Poly treated cone woofer with treated
foam surround •Pivotal 1" dome tweeter •White perforated steel grill
and ABS frame •Attached mounting tabs for easy mounting in existing
wallboard •Red/black color coded push terminals to accept up to 14AWG speaker
wire Specifications: •Power capacity: 30W/80W RMS/peak •Frequency response: 70Hz~20KHz •Impedance:
8ohm •Sensitivity: 91dB •Overall frame diameter: 11" •Required cutout: 93⁄8" •Mounting depth: 7" •Sold in pairs
Order #
50-9061
(1-3 prs.)
$79.95
(4-11 prs.)
$75.95
(12 prs.-up)
$71.95
(12 prs.-up)
$112.27
MA Series Ceiling Speaker
Completely enclosed ceiling speaker is the ideal all–purpose solution, covering a
wide variety of distributed commercial and residential sound applications. Internal
25V/70V transformer taps are easily selected via the front baffle, allowing final
volume balancing to be done after installation. 8ohm position is provided for
residential applications. Rear back box provides protection to the speaker plus
consistent sound, regardless of location. Polypropylene cone woofers and ported
enclosures provide extended frequency response typical of much higher cost units.
Features: •Rubber surround woofers •1" mylar dome tweeter •Fire retardant ABS
rear enclosure •White ABS frame with rotating mounting clips •Easily installs to
existing wallboard •Transformer taps: 0.25W, 0.5W, 1W, 2.5W, 5W, 7.5W, 15W, 30W,
40W (#50-7536 only) •Sold individually
10" In-Wall Subwoofer
The perfect addition to in-wall and small satellite
speaker systems, this is a perfect match for the MCM
#50-6370 and 50-6371 compact in-wall speakers. The
large poly cone woofer with butyl rubber surround
provides low end frequency response essential for
augmenting small speakers. White steel grill and PVC
frame blend seamlessly into most walls, and may be
painted to match any decor. Specifications:
•Recommended amplifier power: 25W~150W RMS
•Frequency response: 40Hz~200Hz •Impedance:
8ohm •Required cutout: 1011⁄16" (W) x 1011⁄16" (H)
•Mounting depth: 4" •Mfr. #AS10SW
•Sold individually
Order #
51-784
Woofer
Size
51⁄4"
61⁄2"
Power Capacity Frequency
RMS/Peak
Response
30W/60W
57Hz~20KHz
40W/80W
34Hz~20KHz
SPL
(W/M)
87dB
88dB
Order Online
www.mcmelectronics.com
Overall Frame Cutout
Diameter
Hole
9.9"
8.2"
11.42"
9.74"
(1–3)
$45.95
54.95
(4–11)
$39.95
46.95
(12–up)
$36.75
43.75
Enclosed Two–Way Ceiling Speaker Pairs
Easy to install ceiling speakers are ideal for background
music, paging, home theater or any general music
application. High quality full range system consists of a
poly cone woofer, with rubber surround, and a 1⁄2" mylar
dome tweeter. The addition of a molded PVC back–box
ensures uniform sound quality regardless of mounting
location, while protecting the speaker from insulation
debris and temperature extremes. Rotating mounting clips
allow fast installation in to ceiling tile and drywall with no
additional hardware. Each speaker is 8ohm. Sold in pairs.
(1-3)
$109.00
NET 30
Terms
64
Order #
50-7535
50-7536
Order #
50-6545
50-6546
Woofer
Size
61⁄2"
8"
Power Capacity
RMS/Peak
35W/100W
35W/100W
Frequency
Response
65Hz~20KHz
50Hz~20KHz
SPL
(W/M)
90dB
92dM
Overall Frame
Diameter
91⁄2"
11"
Cutout
Hole
81⁄16"
95⁄8"
Mounting
Price Per Pair
Depth
(1–3)
(4–11) (12–up)
51⁄2"
$73.00 $69.00 $66.00
7"
87.50 78.50 70.00
C52_pg_065
8/7/07
2:53 PM
Page 65
Home Theater
section
3
Enclosed Two–Way In–Wall Speaker Pairs
Order #
50-6547
50-6548
50-6549
Woofer
Size
51⁄4"
61⁄2"
8"
Power Capacity
RMS/Peak
40W/80W
60W/100W
80W/120W
Frequency
Response
55Hz~20KHz
50Hz~20KHz
50Hz~20KHz
SPL
(W/M)
88dB
88dB
88dB
8" In–Wall Subwoofer
The perfect addition to
in–wall and small satellite
speaker systems. The dual
voice coil 8" long throw
woofer features a 13.3 oz.
magnet, ultra–rigid injection
molded polypropylene cone,
and rubber surround, for
outstanding low frequency
response down to 38Hz.
Included crossover allows
simplified connection of
satellite speakers, with a
high pass frequency of
300Hz. White steel grill and
PVC frame blend seamlessly
into most walls, and may be
painted to match any decor.
Specifications: •Power
capacity: 250W max (both
channels combined)
•Frequency response:
38Hz~300Hz (with included
crossover) •Crossover slope:
12dB/octave at 120Hz •Impedance: 8ohm per channel
•Dimensions (overall): 101⁄8" (W) x 141⁄8" (H) •Required
cutout: 83⁄4" (W) x 123⁄4" (H) •Sold individually
Order #
51-782
(1–3)
$119.95
Overall Frame
Dimensions
11.75" (H) x 8.3" (W) x 3.6" (D)
12.0" (H) x 8.6" (W) x 4.25" (D)
14.0" (H) x 10.0" (W) x 4.1" (D)
(1–3)
$96.50
116.95
140.49
Price Per Pair
(4–11) (12–up)
$87.00 $77.00
105.50
93.95
126.39 112.39
8"
In–Wall
Subwoofer
Stereo
Volume
Controls
The perfect addition
to in–wall, ceiling
and small satellite
speaker systems,
this is a perfect
match any installed
speaker system of
61⁄2" or less. Features: •Dual voice coil 8" long throw
woofer •30 oz. magnet •Ribbed treated paper cone
•Foam surround •Ported front baffle •Dual channel
12dB/octve low pass crossover •Feed through
connections satellite speakers (full range) •White
steel grill and PVC frame Specifications: •Power
capacity: 125W/250W max (both channels combined)
•Frequency response: 40Hz~500Hz (with included
crossover) •Crossover slope: 12dB/octave •Impedance:
8ohm per channel •Dimensions (overall): 10" (W) x
141⁄8" (H) •Required cutout: 83⁄4" (W) x 123⁄4" (H)
•Mounting depth 33⁄4" •Sold individually
In-wall volume
controls utilize
high quality
multitap audio
transformers
and smooth 12 position rotary switches to provide
full range level control. They are designed for use in
distributed audio systems, primarily those involving
in-wall and ceiling speaker systems. Available in
single gang steel plate and decora style all units
are shipped as white, with ivory plates and knobs
included for easy color conversion. Standard units
are available in 25W RMS and 100W RMS versions,
impedance matching models are 100W RMS.
Impedance matching design allows of up to 16 pairs
of 8ohm speakers to be connected to a single stereo
amplifier, and appear as a 4ohm load. Features:
•Detachable terminal strips accept up to 14AWG
wire •Included matching cover plates with decora
models •May be mounted in a single gang box or
low voltage bracket Specifications: •Frequency
response: 35Hz~20KHz •Attenuation: -34~0dB,
in 12 steps •Impedance matching (applicable
models only): x2, x4 and x 8ohm
Order #
50-6369
(1–3)
$59.95
(4–up)
$54.95
Order
50-7850
50-7860
50-7890
50-7880
50-7870
(4–up)
$113.25
In-Wall Speaker
Selector Switches
Allows the user to select between
more than one source on a single pair
of speakers, or more than one
speaker pair on a single source. A/B
style utilizes a two position rocker
type switch. Available in white, ivory
or almond, all switches are mounted
to a single gang decora style plate, cover included.
Rear mounted screw terminal strips accept up to
14AWG wire. Note: Includes a white switch on white
plate, or black switch on ivory and almond plates.
Order #
50-6700
50-6701
50-6702
Switch Type
A/B
A/B
A/B
Plate Color
White
Ivory
Almond
(1~3)
$37.25
37.25
37.25
(4~up)
$31.88
31.88
31.88
•Speaker selector with independently rocker type
switch for seven pairs of speakers •Two source
switches can play either source 1 or source 2
•Built-in impedance protection •Removable
connects accept up to 14 gauge wire •Decora style
triple gang plate •Separate left and right ground
paths for compatibility with all amps, even bridged
•Power handling: 50W/CH. (RMS) 100W/CH.
(program) •Dimensions: 6.33" (W) x 4.56" (H)
x 2.44" (D) •White
Order #
50-2765
(1-9)
$81.99
(10-up)
$78.79
Transformerless volume controls are ideal for use with
any in-wall or ceiling speaker system, where local control
is desired, and pure sound quality is a must. High–quality,
close tolerance audiophile grade resistors are used instead
of conventional audio transformers, allowing full 20Hz~20KHz frequency response to
pass through to the speaker. This single difference provides performance that is superior to virtually any
transformer based control, at any price. Rotary control provides 0~36dB attenuation in 11 steps, with position
12 being off. All models include white and ivory cover plate and knob to match any décor. Detachable terminal
strips greatly ease installation and will accept up to 14AWG cable. Control mounts in standard single gang
boxes or mud rings, and includes decora style cover plate. Power capacity: 60W RMS per channel.
(1–3)
$29.95
Included
Impedance
Style Matching
Decora
No
Plate
No
Decora
No
Decora
Yes
Plate
Yes
Power
Capacity
(RMS) (1-3)
25W $19.95
25W 19.95
100W 22.95
100W 25.95
100W 25.95
(4-9)
$18.50
18.50
21.28
24.06
24.06
(10-up)
$17.57
17.57
20.21
22.86
22.86
Seven Pairs with Two Source Switcher
Audiophile Grade Stereo Volume Control
Order #
50-7905
3
Easy to install in–wall speakers are ideal for background music, paging, home
theater or any general music application. Their wide frequency response and above
average power capacity make them ideal as main, surround or background speakers.
System consists of a woven fiberglass, blue cone woofer, with rubber surround, and
a 1" titanium swivel dome tweeter. The addition of a molded PVC back–box ensures
uniform sound quality regardless of mounting location, while protecting the speaker
from insulation debris and temperature extremes. Rotating mounting clips allow
fast installation in to drywall with no additional hardware. All will mount in a
standard 2 x 4 studded wall. Each speaker is 8ohm. Sold in pairs.
(4–9)
$27.76
(10–up)
$24.67
Slide Style Stereo
Volume Control
Provides all of the
same benefits of our
other high–quality stereo
in–wall volume controls,
with attractive slide styling.
Impedance matching design
allows use in systems from
one to 16 pairs of speakers
on a single stereo amplifier. Features: •Included
old–work installation bracket, eliminating the need
for an electrical box •Attractive decora styling with
included cover plate •Detachable terminal strips
accept up to 14AWG wire Specifications: •Power
capacity: 100W/180W RMS/max •Frequency response:
35Hz~20KHz •Attenuation: -34~0dB, in 12 steps
•Impedance matching: x1, x2, x4 and x 8ohm •Size:
Standard single gang •Color: White •Call for larger
quantity pricing
Order
50-6377A
(1–3)
$29.95
(4–11)
$27.15
(12–up)
$24.68
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
65
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C52_pg_066
8/7/07
2:37 PM
Page 66
Home Theater
section
3
Six Pair Speaker Selector Switch
3
Four Pair Speaker Selector Switch
Allows simultaneous operation of up to four pairs of 8ohm or 16ohm speakers.
Automatic load protection ensures that the amplifier sees a 4ohm or higher load,
regardless of speakers selected. The built-in protection circuit inserts resistance
only when more than two pairs of speakers are selected. This ensures that
maximum power is delivered to the speakers. Additional resistance is inserted
only when needed. Amplifier A/B switch allows selection from two different
sources allowing greater flexibility. Left and right channels are fully isolated
from each other, allowing compatibility with any type of amplifier. Thermo-Tek™
circuit protects switch and components in the event of an overload situation.
Power capacity 40W/120W RMS/program. Rear mounted terminal strip accepts
up to 10AWG wire. Dimensions: 17" (W) x 2" (H) x 5" (D). Black color.
Order #
50-2075
(1-3)
$110.25
(4-9)
$99.45
(10-up)
$89.71
Allows simultaneous operation of up to four pairs of 8ohm or 16ohm speakers,
in any combination. While primarily intended for use with 8ohm and 16ohm
speakers, a switch is provided to insert sufficient resistance to safely operate
4ohm speakers. An amplifier A/B switch allows selection from two different
sources allowing greater flexibility. Progressive impedance circuit ensures that
the amplifier sees a 4ohm or higher load, regardless of speakers selected. This
circuit inserts no resistance when any two pairs are selected, inserts a small
amount when any three or four pairs are selected, and slightly more when five
or all six pairs are selected. This ensures that maximum power is delivered to
the speakers, additional resistance is inserted only when needed. Left and right
channels are fully isolated from each other, allowing compatibility with any type
of amplifier. Thermo-Tek™ circuit protects switch and components in the event
of an overload situation. Power capacity 40W/120W RMS/program. Rear
mounted terminal strip accepts up to 10AWG wire. Dimensions: 17" (W) x
2" (H) x 61⁄2" (D). Black color.
Order #
50-2070
(1-3)
$205.00
(4-9)
$190.55
(10-up)
$159.65
Front
Speaker Distribution Panel
Ten Position
Speaker Switch
Intended for PA or other
monaural applications, this switch box provides
individual on/off control of up to ten speaker
systems. Power capacity is 100W RMS, internal
progressive resistor network keeps amplifier load
to a minimum of 2ohm, when ten 8ohm systems are
selected. Rear speaker in/out connections are color
coded push connectors. Metal case has non-skid
rubber feet and stays securely in place. Dimensions:
8" (W) x 21⁄4" (H) x 41⁄4" (D). Black color. Note:
Because low resistance loads can be damaging to
some amplifiers, the customer must ensure that the
total speaker load will be within the limits of the
equipment in use.
Order #
50-6205
(1-5)
$18.95
(6-9)
$18.03
(10-up)
$14.68
Ten Position Headphone
Selector Box
Ideal for store displays,
educational applications, hearing impaired use
and many other situations, this tabletop control box
allows individual selection of up to ten sets of stereo
headphones. Progressive switched resistor network
ensures that a proper load is seen at the source,
regardless of the number of headphones selected.
Ten front panel push switches select which of the
ten rear 1⁄4" stereo headphone jacks are active. All
connectors are high quality PC board mounted and
gold plated, insuring reliable use after years of
service. Input is cable is 5" flat cord, terminated
with a 1⁄4" male stereo plug. Metal case has non-skid
rubber feet and stays securely in place. Dimensions:
10" (W) x 2" (H) x 31⁄2" (D). Sloped front, black color.
Order #
50-6230
(1-5)
$26.50
(6-9)
$23.95
(10-up)
$19.95
NET 30
Terms
66
Order Online
www.mcmelectronics.com
Impedance matching distribution
network is ideal in situations
where numerous pairs of speakers
are to be connected to a single
stereo amplifier. This panel utilizes
Back
a pair of high–powered impedance
matching transformers to allow
loads at less than 1ohm to appear
as an 8ohm load. A ten–position
jumper terminal strip selects the
appropriate multiplier, from x1
through x10, depending upon the
impedance of, and the number of
speakers connected. By doubling the speaker pairs on each output terminal, and selecting the x10 position, a
maximum total of 20 pairs of 8ohm speakers may be connected, and appear as a 4ohm load. The input terminal
pair accepts up to 10AWG wire, and ten pairs of detachable output terminals accept up to 14AWG wire. The
2RU panel is intended to be rack mounted, or may be
Order #
(1–3)
(4–up)
located on a shelf, behind equipment. Overall dimensions:
50-7650
$154.00
$139.00
3.5" (H) x 19" (W) x 4" (D).
Front
Speaker Selector/
Distribution Panel
Impedance matching speaker
selector/distribution network is ideal
Back
in situations where up to ten pairs
of speakers are to be connected to
a single amplifier, and individual
on/off selection is required.
Additionally, a two–position
source selector allows global
selection from two different source
systems. High–powered non–inductive resistors ensure that the speaker load never falls below 4ohm, even when
all ten pairs of speakers are operating. Heavy–duty rocker switches are rugged enough for commercial use, while
remaining suitable for residential applications. Detachable terminal strips accept up to 14AWG wire. The rugged
steel panel is intended for 19" rack mounting, and occupies Order #
(1–3)
(4–up)
two rack spaces. Power capacity: 200W per channel.
50-7655
$149.00
$135.00
Overall dimensions: 3.5" (H) x 19" (W) x 2" (D).
Front
Speaker Selector Panel
Ten–position speaker selector is ideal
in situations where up to ten pairs
of speakers are to be connected to
a single amplifier, and individual
Back
on/off selection is required.
Additionally, a two–position
source selector allows global
selection from two different source
systems. As this unit provides no
impedance protection, it is designed
for use with commercial distributed
sound systems that utilize 25V or
70V transformers. It is also great for use in residential 8ohm systems, where impedance matching volume
controls are used. Heavy–duty rocker switches are rugged enough for commercial use, while remaining suitable
for residential applications. Detachable terminal strips accept up to 14AWG wire. The rugged steel panel is
intended for 19" rack mounting, and occupies two rack
Order #
(1–3)
(4–up)
spaces. Overall dimensions: 3.5" (H) x 19" (W) x 2" (D).
50-7670
$139.00
$129.00
C52_pg_067
8/7/07
2:38 PM
Page 67
Home Theater
#50-4610, 50-4620
section
3
TM
Contractor Series Stereo Power Amplifiers
#50-4630
3
The Stellar Labs SLA Series of Stereo Amplifiers was designed specifically for use
in distributed audio installations, where high reliability and premium sound quality are a must. Remote on/off
triggering and signal sensing allow these units to be set up in equipment racks, with no further contact required.
Rear mounted master level controls keep installation safe from future tampering. Two auto-switching inputs
allow automatic operation when used with more than one system. Features: •Front panel controls for level,
balance and A/B speaker selection •Two sets of L/R inputs, each may be switched to accept line level speaker
level signal •Auto-switching between inputs, with adjustable delay •Line level pass through output on input #2
•Manual or auto-sensing power control •12V trigger input allows power-on command from external components
•12V trigger output allows amplifier to trigger external components •Stereo and bridged mono operation
•Heavy-duty binding post speaker outputs
Order
Model
Output (RMS @ 4ohm) Output (8ohm) Bridged (1-3)
•2ohm stability •Discrete output
50-4610 SLA150 75W RMS x 2CH
150W RMS
$199.00
components •THD of less than 0.2%
50-4620 SLA250 125W RMS x 2CH
250W RMS
279.00
(at 4ohm) •See www.mcmelectronics.com
50-4630 SLA470 150W RMS x 2CH
470W RMS
349.00
for complete details including
instruction manual.
Front
Distributed Audio
Stereo Receiver
Back
High Power Eight Pair Speaker Switch
Front
Impedance Protected
Speaker Selectors
Low–profile speaker distribution
systems enable on/off control to four, six or eight pairs
of speakers, while providing impedance protection to
the amplifier. Source A/B selector for each zone allows
independent selection from two different sources to
each speaker pair. Non–inductive resistor network
maintains impedance above 4ohm, regardless of
the number of 8ohm speakers selected. Since
resistors are used instead of commonly used
transformers, much wider frequency response is
maintained through the selector. Terminal strips
accept up to 12AWG wire, and are fully removable
to ease installation. Specifications: •Power capacity:
70W with impedance protection, 140W without
•Aluminum chassis with extruded aluminum
front panel •Black color
Order #
50-7600
50-7605
50-7610
Pairs
Two
Four
Eight
Dimensions
1.75" (H) x 8.5" (W) x 4.5" (D)
1.75" (H) x 17" (W) x 4.5" (D)
1.75" (H) x 17" (W) x 4.5" (D)
(ea.)
$84.95
109.00
125.00
Speaker Selector Switches
with Volume Control
Versatile speaker switches allows connection of
up two six pairs of speakers, to two different stereo
sources, with individual volume control of each pair.
Each speaker pair has an independent pushbutton
selector for “Source A” and “Source B”, and an 11
position rotary volume control. Volume adjustment
and impedance matching is accomplished through
internal heavy-duty multi-trapped transformers.
For each speaker, this allows complete, independent
control of each pair, with maximum efficiency, and
virtually no generation of heat. Rear screw terminal
strips accept up to 14AWG wire, and are removable,
allowing easy connection of multiple cables. Power
capacity: 18W/50W RMS/program per speaker,
100W/150W RMS/program total. Housed in an
extremely rugged steel enclosure, these units
are ideally suited in component racks or shelves.
Dimensions: 3" (H) x 17" (W) x 7" (D), including knobs.
Order #
50-6675
50-6676
Speaker Pairs
Four
Six
(1–3)
$199.00
239.00
(4–up)
$184.37
230.72
Controls up to eight pairs of speakers with
250W/750W RMS/music power capacity. High
power transformers with selectable taps allow you to
obtain maximum power transfer while maintaining
a safe load of 4ohm or higher. Because the system is
capable of transforming a 1⁄3ohm load to appear as a
4ohm load, several speaker pairs may be used on a
single switch position. The left and right channels
are completely isolated, allowing compatibility with
any amplifier. Rear mounted terminal strip which
accepts up to 10AWG wire. Dimensions: 17" (W) x
31⁄2" (H) x 6" (D).
Order #
50-5705
This receiver is perfect for music listening in any
room of the home, with conventional left/right
stereo output. What sets this apart is four amplifier
output channels, creating a self contained, four-zone
distributed audio receiver. Up to four pairs of
bookshelf, in-wall, in-ceiling or outdoor speakers
may be driven directly from this unit, with
independent selection of any or all pairs. It
is perfect in small residential or commercial
background music applications. Features: •AM/FM
tuner with 30 station presets •Five audio inputs
(including tuner) •Phono input •IR remote control
•Volume, bass and treble controls •Headphone jack
•Power output: 70W RMS x 4 (8ohm), 100W RMS x 4
(4ohm) •THD: <0.2%, 20Hz~20KHz into 8ohm
•Dimensions: 5" (H) x 173⁄8" (W) x 13" (D)
•Mfr. #RX-5502
Order #
50-4640
(ea.)
$199.00
(1-3)
$239.00
High Power 12 Pair Speaker Switch
Controls up to 12 pairs of speakers with 250W/750W
RMS/music power cpacity. High power transformers
with selectable taps allow you to obtain maximum
power transfer while maintaining a safe load of
4ohm of higher. Because the system is capable of
transforming a 1⁄3ohm load to appear as a 4ohm load,
several speaker pairs may be used on a single switch
position, allowing more than 12 pairs of speakers
to be connected. The left and right channels are
completely isolated, allowing compatiblity with any
amplifier. Connections are made via rear mounted
terminal strip which accepts up to 10AWG wire.
Self powered unit needs no AC supply. Dimensions:
17" (W) x 31⁄2" (H) x 6" (D). Black color.
Order #
50-6440
(1-3)
$369.00
(4-up)
$322.28
Table-top control
center provides
external volume adjustment for a single pair of
speakers. 12 position rotary control utilizes multi
tapped transformers for efficient power transfer,
with no heat build-up. Front panel 1⁄4" headphone
jack mutes speakers for private listening and is
controlled by the volume control. Rear speaker in/out
connections are heavy duty push terminal strips and
accept up to 14AWG wire. Heavy metal case has
non-skid rubber feet and stays securely in place.
Power capacity: 100W RMS per channel.
Dimensions: 13⁄4" (H) x 7" (W) x 35⁄8" (D). Silver color.
(1-4)
$32.50
Five-Way Speaker
Switch Box with
Headphone Jack
Tabletop control box allows selection of up to five
speaker pairs. Internal 100ohm resistors ensure that
amplifier always sees a load, even with all switches
off. Progressive switched resistor network ensures
that a minimum of 8ohm load is seen by the
amplifier (when 8ohm speakers are used), regardless
of speakers selected. Front panel 1⁄4" headphone jack
allows monitoring of the source. 200W maximum
power capacity. All connections are push type. Metal
case has non-skid rubber feet and stays securely in
place. Dimensions: 81⁄8" (W) x 21⁄4" (H) x 35⁄8" (D). Sloped
front, black color.
Order #
50-6200
(1-5)
$22.95
(6-9)
$21.37
(10-up)
$18.03
In-Wall Switch Boxes
Table-Top Speaker
Volume Control
Order #
50-6216
Back
(5-9)
$30.95
(10-up)
$27.35
Designed to operate four pairs of
loudspeakers of 4ohm or higher
impedance with no heat developed,
even when all speakers are run
simultaneously. Can handle up
to 72W RMS or 216W audio
35Hz~20KHz. Will fit in
standard single gang junction box.
Order #
(1-3)
50-2085 $147.46
(4-9)
$137.32
(10-up)
$118.59
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
67
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C52_pg_068
8/7/07
2:32 PM
Page 68
Home Theater
section
Front
Rear
Speaker Selector Volume Control
3
These control boxes can operate multiple speaker pairs of 4, 8 and 16ohm impedance in any combination and can
be used with either one or two stereo amplifiers. This makes it convenient to listen to different program material
in different rooms. 216W Optimatch™ attenuators are employed so that worst case operating conditions will
appear as a 4ohm load to the amp. Made in USA.
Order #
50-2390
50-2395
Speaker Pairs
Six
Four
(1-3)
$309.00
224.00
(4-9)
$299.00
220.42
(10-up)
$294.00
215.27
3
A/B Input Source
Switch Box
Multi Room Speaker Distribution Strip
Essential for distributed residential sound
installations, this terminal strip provides a
convenient method of connecting numerous pairs
of speakers to a single pair of binding posts. Input
terminals are heavy duty, gold plated brass, five–way
binding posts, which will accept single or paired
banana plugs or bare wire up to 8AWG. Each output
connection features detachable screw terminal strips
which accept up to 14AWG wire. Internal PC board
circuit is reinforced with internal point–to–point
14AWG wiring, for improved current capacity.
Compact size allows easy location behind equipment.
Screw holes allow easy wall mounting and rubber
feet are included for shelf top use. Note: Terminal
strip is straight parallel connection and provides
no impedance protection. It is intended for use
with 70V distributed speakers, or 8ohm systems
that utilize impedance matching volume controls.
Specifications: •Power capacity: 200W RMS per
channel •Dimensions: 2" (H) x 2.25" (W) x 10.5" (L),
including binding posts.
Order #
50-2204
(1–3)
$33.39
Back
Two-Way Speaker
Switch Box
Tabletop control box
allows selection of A/B
Top
speaker pairs. Internal 220ohm
resistors ensure that amplifier always sees a
load, even with both switches off. With both
speaker switches in “on” position, speaker pairs are
connected in series, allowing use of 4ohm or 8ohm
speaker systems, without damage to amplifier. 200W
maximum power capacity. All connections are push
type. Metal case has non-skid rubber feet and stays
securely in place. Dimensions: 6.9" (W) x 2.2" (H) x
3.9" (D). Sloped front, black color.
Order #
50-6185
(1-5)
$17.59
(6-9)
$16.17
(10-up)
$13.56
Audio
LeveliZer™
Line Level
Stabilizer
Designed for use in multi room sound distribution
installations where individual speaker selection is
not required. Impedance protection circuit allows
up to eight sets of 8ohm speakers to be connected
to a stereo amplifier, and appear as a 4ohm load.
Completely independent left and right circuits
allow compatibility with all amplifier types. Attached
mounting plate allows installation into standard
19" racks, or between studs spaced on 16" centers.
Features: •Color coded push terminals accept up
to 8AWG wire •Switchable impedance protection
•Non-inductive resistors for full frequency response
•Rugged aluminum housing with black finish
Specifications: •Power capacity: 120W program
per channel •Frequency response: 20Hz~20KHz
•Dimensions: 3.5" (H) x 19.0" (W) x 2.25" (D)
Order #
50-2202
(1-3)
$84.95
(4-11)
$79.95
8" Acoustic Baffle
•Protects PA
speakers from
dust and water
contamination
•Improves sound
quality •Pliable to fit most any
installation •Packaged in pairs
Order #
60-290
(pr.)
$10.06
NET 30
Terms
68
Order Online
www.mcmelectronics.com
Order #
50-6220
(1-5)
$7.49
(6-9)
$6.75
(10-up)
$6.15
Input Source Mixer/
Headphone Amplifier
(4–up)
$30.93
Multi Room Speaker Distribution Strip
Compact control box
allows selection of two
input sources into a single
auxiliary or tape input.
Single push button switch
selects source “A” or “B”.
Ideal when connecting
audio devices such as
CD players, VCRs, laser
disk players and satellite
receivers to home stereo
equipment. Output
connection is made
via attached 5' lead,
terminated with male
RCA type connectors, color
coded red and white. Input
connections are RCA type female. Rugged metal
enclosure is black in color, dimensions: 3" (W) x 1"
(H) x 3" (D) including switch and connections.
Back
Maintains a
constant average
output loudness,
regardless of the audio
source type or loudness.
Front
Perfect for louder than
program commercials on radio and TV, and volume
variations between different broadcasting stations,
records and CDs (perfect for multi-disc players).
Connect to the tape loop of any amplifier or receiver,
or between the pre-amp and power amplifier, or
between audio outputs of TV or VCR and amplifier
inputs. Because this device monitors average input
level, normal program dynamics experienced in high
action video scenes are maintained. Dimensions:
21⁄8" (H) x 71⁄8" (W) x 33⁄4" (D) exluding control knob.
Black in color.
Order #
50-6155
(ea.)
$230.00
Table-Top Speaker Selector/Volume Control
Versatile control
center combines
switching
capability for
two speaker
pairs, with a volume adjustment for pair #2.
12 position rotary control utilizes multi tapped
transformers for efficient power transfer, with no
heat build-up. Front panel 1⁄4" headphone jack mutes
both speaker pairs for private listening and is
controlled by the volume control. Rear speaker in/out
connections are heavy duty push terminal strips and
accept up to 14AWG wire. Heavy metal case has
non-skid rubber feet and stays securely in place.
Power capacity: 100W RMS per channel.
Dimensions: 13⁄4" (H) x 95⁄8" (W) x 4" (D). Silver color.
Note: When two pairs of speakers are selected, they
are in parallel, so impedance must be considered.
When both speakers are in off position, pair #1 will
remain on, preventing damage to amplifiers with
outputs sensitive to open loads.
Order #
50-6211
(1-4)
$39.95
(5-9)
$37.75
(10-up)
$32.95
Versatile table-top device
features two stereo line
level inputs and a single
line level output, allowing
the user to mix two sources
into one. Slide controls allow independent gain
adjustment for each source. Front panel 3.5mm
stereo headphone jack, with slide level control, is
provided for monitoring of the mixed source.
Compact unit is perfect for any application requiring
a low cost line mixer, or headphone amplifier. Metal
case has non-skid rubber feet and stays securely in
place. All connections, except headphone, are RCA
type female. Requires 12VDC, 100mA. AC adaptor
included. Dimensions: 13⁄4" (H) x 5" (W) x 41⁄2" (D).
Black color.
Order #
50-6182
(1-4)
$24.95
(5-9)
$22.50
(10-up)
$19.75
Phono Input Attenuator
Device allows standard
line level items to be
played through magnetic
phono inputs, commonly
found on older home audio
receivers and mixing
consoles. CD/DVD/ MP3
players, tape decks, VCRs,
computer sound cards and
tuners may now be connected to unused phono
inputs. In addition to providing the required signal
attenuation, this unit provides passive equalization
to compensate for the RIAA curve that is present
on magnetic phono inputs. Inputs are RCA female,
outputs are male RCA connections on a 7" pigtail.
Passive device requires no power. Dimensions:
1" (H) x 2.25" (W) x 3" (D)
Order #
50-7240
(1–3)
$9.99
(4–11)
$8.64
(12-up)
$7.82
C52_pg_069
8/7/07
2:44 PM
Page 69
Home Theater
section
3
Elevate™ Whole
Home Music System
Order #
50-4650
50-4655
Model #
BA-2430S
BA-2430DA
Description
Complete four room kit
Elevate amplifier only
(ea.)
$475.00
299.00
Designed for use with the Breathe Elevate™ Music
System, this amplifier connects to the Zone1 output,
providing additional power. It is perfect for providing
party level SPL in large rooms, outdoors or to
multiple speaker pairs. 2ohm amplifier stability
allows this unit to directly drive four pairs of
8ohm speakers without impedance concerns.
Features: •3.5mm stereo line level input connection
•3~30VAC/DC trigger input Specifications: •Power
output: 70W RMS x 2 CH @ 8ohm, 100W x 2CH @
4ohm •THD: 0.08% •Frequency response:
20Hz~20KHz •Power requirements: 110/220VAC,
50/60Hz, 405W (max) •Dimensions: 3.75" (H) x
8.5" (W) x 13.5" (D) •Model #BA-200
Order #
50-4660
(ea.)
$249.00
Indoor/Outdoor
Speaker Pairs
Highly versatile
speakers include a base
stand for bookshelf use,
and a “U” bracket for
wall mounting. Their
rugged enclosures and
stainless steel hardware make these
suitable for outdoor use, while the
superior quality components provide outstanding
performance expected of a pair of bookshelf speakers.
Features: •61⁄2" poly woofer with rubber surround
•13mm mylar tweeter •Gold plated connections
Specifications: •Power capacity: 50W RMS
•Frequency response: 55Hz~20KHz •Sensitivity:
89dB (W/M) •Impedance: 8ohm •Dimensions:
13" (H) x 75⁄8" (W) x 7" (D) •Sold in pairs
Order #
50-4670
50-4671
Resonate™
61⁄2" Single Stereo
Ceiling Speaker
Elevate™ Music System
Learning Remote Control
Learning IR remote control
operates all functions of the
Elevate™ Music System, and
may be programmed to operate
source devices. This allows operation
of tuners, satellite receivers, CD or
DVD players from any Elevate™ zone,
simply by pointing the remote at the
wall mounted keypads.
Order #
50-4651
Model #
BA-LRC1
Designed for use with
the Elevate™ Whole
Home Music System,
this high performing
ceiling speaker is
perfect for any
residential or small commercial distributed sound
system. This speaker features a dual voice coil woofer
and dual tweeters, allowing it to act as two speakers
in one opening. It is perfect for providing L/R audio to
small lavatories, entryways and hallways. Features:
•Dual 13mm mylar dome tweeters •61⁄2" poly cone
woofer with rubber surround •Rotating plastic
clips for easy mounting to existing drop ceiling tile
or drywall •Optional pre-construction bracket to
ease new–construction installations Specifications:
•Power capacity: 50W RMS (each channel)
•Frequency response: 50Hz~20KHz •Impedance:
8ohm (each channel) •SPL: 91dB (W/M) Dimensions:
•Outer frame diameter: 9" •Required cutout: 8"
diameter •Mounting depth: 3" •Sold individually
(ea.)
$34.95
Elevate™ Music System Keypads
Single and two–pack of keypads are
available when the Elevate™ amplifier
is purchased alone. This allows greater
flexibility in allowing the keypads to be
installed during construction, and the
amplifier to be added later. Each
keypad includes black, almond,
ivory and white faceplates.
Order #
50-4656
50-4657
Model #
BA-2430IK
BA-2430KP
Description
Two pack
Single
Order #
50-4667
50-4668
(ea.)
$119.00
59.95
Designed for use with
the Elevate™ Whole
Home Music System,
this high performing in–wall speaker pair is perfect
for any residential or small commercial distributed
sound system. The micro perforated grill adds to the
aesthetic beauty of these speakers, which may be
painted to match any décor. Features: •Pivotal 20mm
silk dome tweeter •61⁄2" poly cone woofer with rubber
surround •Rotating plastic clips for easy mounting to
existing drywall Specifications: •Power capacity:
50W RMS •Frequency response: 50Hz~20KHz
•Impedance: 8ohm •SPL: 91dB (W/M) Dimensions:
•Outer frame: 12" (H) x 83⁄4" (W) •Required cutout:
111⁄8" (H) x 73⁄4" (W) •Mounting depth: 3"
•Sold in pairs
Model #
BA-650I
(pr.)
$99.95
Designed for
use with the
Elevate™ Whole
Home Music System,
this high performing ceiling speaker pair is perfect
for any residential or small commercial distributed
sound system. The micro perforated grill adds to the
aesthetic beauty of these speakers, which may be
painted to match any décor. Features: •Pivotal 20mm
silk dome tweeter •61⁄2" poly cone woofer with rubber
surround •Rotating plastic clips for easy mounting
to existing drop ceiling tile or drywall •Optional
pre-construction bracket to ease new–construction
installations Specifications: •Power capacity:
50W RMS •Frequency response: 50Hz~20KHz
•Impedance: 8ohm •SPL: 91dB (W/M) Dimensions:
•Outer frame diameter: " •Required cutout: 8"
diameter •Mounting depth: 3" •Sold in pairs
Order # Model #
50-4665 BA-650C
50-4668 BA-BK6C
Color
Black
White
(pr.)
$199.00
199.00
Single Stereo
Indoor/Outdoor Speaker
Often times a pair of
outdoor speakers is
impractical or undesired.
In some areas, actual
stereo imaging may not
be a possibility, yet both
channels need to be heard. This
speaker features a dual voice coil woofer
and two tweeters, allowing it to provide both left and
right channels from a single point. Highly versatile
speakers include a base stand for bookshelf use,
and a “U” bracket for wall mounting. Their rugged
enclosures and stainless steel hardware make these
suitable for indoor or outdoor use. Features:
•61⁄2" poly woofer with rubber surround •Dual
13mm mylar tweeters •Gold plated connections
Specifications: •Power capacity: 40W RMS
(each channel) •Frequency response: 60Hz~20KHz
•Sensitivity: 88dB (W/M) •Impedance: 8ohm (each
channel) •Dimensions: 13" (H) x 75⁄8" (W) x 7" (D)
•Sold individually
Order #
50-4672
50-4673
Model #
BA-650-OSB
BA-650-OSW
Color
Black
White
(ea.)
$105.00
105.00
Resonate™ Outdoor
Rock Speakers
Resonate™
61⁄2" Ceiling
Speaker Pair
Resonate™
61⁄2" In–Wall
Speaker Pair
Order #
50-4666
Model #
Description
(ea.)
BA-650CS Ceiling speaker
$64.95
BA-BK6C Pre-construction bracket pair 12.95
Model #
BA-650OB
BA-650OW
Description
(pr.)
Speaker pair
$99.95
Pre-construction bracket pair 12.95
Attractive, realistic
rock finish compliments
any landscape setting.
Completely sealed
exterior surface provides
long term durability and
resistance to the elements.
Features: •61⁄2" poly cone
woofer with rubber surround
•13mm diameter mylar dome
tweeter •Safety loop for securing to the ground
Specifications: •Power capacity: 70W RMS
•Frequency response: 80Hz~20KHz •Sensitivity:
89dB (W/M) •Dimensions: 91⁄2" (H) x 101⁄2" (W) x
91⁄2" (D) •Sold in pairs
.Order #
50-4662
50-4663
Model #
BA-650RK-GT
BA-650RK-SA
Color
Granite
Sandstone
(pr.)
$99.95
99.95
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
69
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
3
This complete four zone sound system brings
multi–zone, multi–source audio to a new price
level. Features: •Four independent stereo amplifier
channels, one for each zone •Individual keypad
control for each zone •Independent selection from
two input sources from each zone •Complete control
of input source, volume level and system power on/off
from each keypad •Infrared repeating from each
keypad to control source devices as well as the
Elevate™ unit Elevate™ amplifier includes:
•Elevate base unit •Allport™ connection cable
•Two IR emitters •IR remote control •Complete
four-room kit also includes four remote keypads
Specifications: •Power output: 15W RMS x 8 CH
•THD: 0.4% •Frequency response: 30Hz~20KHz
•Power requirements: 110/220VAC, 50/60Hz, 166W
•Dimensions: 3.5" (H) x 8.5" (W) x 12.75" (D)
Pulse™ High Power
Stereo Amplifier
C52_pg_070
8/7/07
2:51 PM
Page 70
51⁄4" Ceiling
Speaker Pair
Home Theater
section
3
3
12 Channel Distributed
Audio Amplifier
Six Zone Distributed
Audio Receiver
The M-64 multi-zone receiver utilizes 12 independent
amplifier channels to distribute audio to six stereo
zones. Each zone may independently select from up
to four separate sources (including internal AM/FM
tuner), and selection may be done either on the front
panel, or via remote mounted keypad controllers.
Multiple M-64 receivers may be cascaded to allow
additional zones. Features: •Internal AM/FM stereo
tuner with 20 presets •12 amplifier channels with
30W RMS per channel •Output channels are stable
to 4ohm •Four input sources can be selected in any
of six zones •Utilizes JobSite keypads and remotes
•Includes one IR remote control •Individual fixed
and variable preamp outputs for each zone •12VDC
control output •Paging input •Dimensions: 51⁄2" (H) x
17" (W) x 15" (D) •See www.mcmelectronics.com for
complete information and 45 page owners manual.
Order #
50-8560
(ea.)
$1500.00
Remote Zone
Control Enhanced Keypad
Designed specifically for addition to
the M-4KP control, this 16 button
keypad provides enhanced control
of source inputs. Numeric keys from
0~9, (+) and (-) allow direct entry
of CD tracks, preset stations and
similar functions. Additional keys
are provided for RANDOM, GROUP,
DISC and FAV functions. Unit occupies a single gang
space in electrical boxes or low voltage brackets, and
although it is ideally mounted in a double gang space
with the M-4KP, it may me mounted alone. Keypad
includes a short RJ-45 jumper for connection to the
M-4KP. •Required depth: 29⁄16" •Mfr. #M-10KP
Order #
50-8575
(ea.)
$55.95
Remote Zone
Control Keypad
Single gang keypad mounts in
standard electrical box or low
voltage bracket, and allows source
selection, on/off and volume control
of the M-64 receiver from a remote
location. Kit includes 200 key labels
for custom source identification,
as well as white, bone and almond
decora plate inserts. Features:
•Source-in-use indication •12 step volume control
•Backlit keys •Three female RJ-45 connectors for
connection to M-64 receiver, M10-KP enhanced
keypad and IR remote input •Required depth:
29⁄16" •Mfr. #M-4KP
Order #
50-8570
(ea.)
$89.95
NET 30
Terms
70
Order Online
www.mcmelectronics.com
12 independent amplifier channels allow music to
be distributed to up to six zones, making this perfect
in distributed audio applications. Each amplifier
channel may use its own line level input, or be
switched to the common stereo input bus. Each
channel has 30W RMS output, and adjacent channel
pairs may be bridged for a single 80W RMS output
channel. Amplifier outputs are stable to loads as low
as 2.66ohm, allowing up to three 8ohm speakers to
be paralleled to each channel. Features: •RCA line
level inputs •Binding post speaker outputs •Bus
input and output for cascading multiple amplifiers
•Independent gain control on each channel •Auto
power on input sensing •3~30VAC/DC trigger input
•12VDC trigger output Specifications: •Power
output: 30W RMS x 12 channels •Frequency response:
5Hz~50KHz •S/N ratio: 85dB •Dimensions: 51⁄2" (H) x
17" (W) x 15" (D)
Order #
50-8580
(ea.)
$700.00
Two Channel
Distributed Audio Amplifier
45W x two channel amplifier is perfect for amplifying
a single zone in a distributed audio system. Multiple
turn-on modes allow this amplifier to be left virtually
unattended after installation. Output stages are
stable to loads as low as 2.66ohm, allowing
connection of up to three pairs of 8ohm speakers.
Cascade line level outputs allow daisy chaining of
multiple amplifiers. Features: •RCA line level
inputs •Binding post speaker outputs •Independent
gain control on each channel •Auto power on input
sensing •3~30VAC/DC trigger input •12VDC trigger
output Specifications: •Power output: 45W RMS x 2
channels •Frequency response: 10Hz~100KHz •S/N
ratio: >85dB •Dimensions: 25⁄16" (H) x
17" (W) x 131⁄8" (D)
Order #
50-8585
(ea.)
$275.00
Audio Amplifier with
Automatic Speaker Switch
Model AB50-X2, compact
stereo amplifier,
provides 50W x
two channels
and includes an
automatic speaker
selector circuit. This
is especially useful if a
distributed audio system
exists, and a need arises to
add a local line level source to only one local zone.
Features: •RCA line level inputs •Snap lock speaker
output connections •Gain control •Auto power on
input sensing •3~30VAC/DC trigger input •12VDC
trigger output •4ohm stable outputs Specifications:
•Power output: 50W RMS x 2 channels •Frequency
response: 5Hz~50KHz •S/N ratio: >85dB
•Dimensions: 21⁄4" (H) x 8" (W) x 71⁄2" (D)
•Mfr. #AB50-X2
Order #
50-8590
(ea.)
$230.00
IR Remote Control
42-button control provides complete
wireless operation of the M-64
multi-zone receiver. Unit may be
pointed directly at the M-64 receiver,
or at remote mounted IR receivers.
Requires two “AA” batteries (included).
Dimensions: 81⁄2" (H) x 21⁄2" (W) x 13⁄8" (D)
Order #
50-8565
(ea.)
$27.95
Perfect ceiling speaker for
accurate music and voice
reproduction. Suitable for
use in bathrooms, kitchens and
similar areas with potentially
high moisture. Features: •51⁄4"
polypropylene woofer with urethane
surround •3⁄4" tweeter •Rustproof
aluminum grill •Suitable for painting •Color
coded push terminals accept up to 12AWG wire
Specifications: •Power handing: 3~50W
•Frequency response: 63Hz~20KHz •Impedance:
8ohm Dimensions: •Overall frame diameter:
73⁄4" •Required cutout: 61⁄2" •Mounting depth: 23⁄4"
•Mfr. #LSC-5 •Sold in pairs
Order #
50-8500
(pr.)
$89.95
51⁄4" Recessed
Ceiling Speaker Pair
Perfect ceiling speaker for
accurate music and voice
reproduction. Unique recessed
appearance provides the
appearance of a recessed can
light. Suitable for use in bathrooms, kitchens
and similar areas with potentially high moisture.
Features: •51⁄4" polypropylene woofer with urethane
surround •1⁄2" tweeter •Rustproof aluminum grill
•Suitable for painting •Color coded push terminals
accept up to 12AWG wire Specifications: •Power
handing: 3~50W •Frequency response: 75Hz~20KHz
•Impedance: 8ohm Dimensions: •Overall frame
diameter: 73⁄4" •Required cutout: 61⁄2" •Mounting
depth: 23⁄4" •Mfr. #LSC-5R •Sold in pairs
Order #
50-8505
(pr.)
$89.95
61⁄2" Ceiling Speaker Pair
Perfect ceiling speaker
for high performance
music and voice
reproduction. Suitable for
use in bathrooms, kitchens
and similar areas with
potentially high moisture.
Features: •61⁄2" talc filled
polypropylene woofer with urethane surround
•3⁄4" tweeter •Rustproof aluminum grill •Suitable
for painting •Color coded push terminals accept up
to 12AWG wire Specifications: •Power handing:
5~60W •Frequency response: 65Hz~20KHz
•Impedance: 6ohm Dimensions: •Overall frame
diameter: 91⁄4" •Required cutout: 8" •Mounting
depth: 33⁄8" •Mfr. #LSC-6 •Sold in pairs
Order #
50-8510
(pr.)
$165.00
8" Ceiling
Speaker Pair
Perfect ceiling
speaker for high
performance music
and voice reproduction.
Suitable for use in
bathrooms, kitchens
and similar areas
with potentially high
moisture. Features: •8"
talc filled polypropylene woofer with treated foam
rubber surround •3⁄4" tweeter •Rustproof aluminum
grille •Suitable for painting •Color coded push
terminals accept up to 12AWG wire Specifications:
•Power handing: 5~100W •Frequency response:
55Hz~20KHz •Impedance: 6ohm Dimensions:
•Overall frame diameter: 105⁄8" •Required cutout: 91⁄2"
•Mounting depth: 33⁄4" •Mfr. #LSC-8 •Sold in pairs
Order #
50-8512
(pr.)
$232.00
C52_pg_071
8/7/07
2:39 PM
Page 71
Home Theater
6 ⁄2" High Performance
Ceiling Speaker Pair
6 ⁄2" High Performance
In-Wall Speaker Pair
Perfect speaker for
high performance music
reproduction in ceiling
locations. Suitable for use
in bathrooms, kitchens
and similar areas with
potentially high moisture. Features: •61⁄2" injection
molded polypropylene woofer with butyl rubber
surround •1" pivoting soft dome tweeter •Rustproof
aluminum grill •Suitable for painting •Color
coded push terminals accept up to 12AWG wire
Specifications: •Power handing: 10~125W
•Frequency response: 50Hz~21KHz •Impedance:
4ohm or 8ohm selectable Dimensions: •Overall
frame diameter: 91⁄4" •Required cutout: 8" •Mounting
depth: 33⁄8" •Mfr. #LSC-6.5 •Sold in pairs
Perfect speaker for high
performance music and voice
reproduction from wall locations.
Suitable for use in bathrooms,
kitchens and similar areas
with potentially high moisture.
These speakers are suitable for
horizontal or vertical mount in
wall surfaces and vaulted ceilings.
Features: •61⁄2" polypropylene
woofer with butyl rubber surround
•1" pivotal soft dome tweeter •Rustproof aluminum
grill •Suitable for painting •Color coded push
terminals accept up to 12AWG wire •Knockout for
JobSite flush mount IR receiver Specifications:
•Power handing: 10~125W •Frequency response:
50Hz~21KHz •Impedance: 6ohm Dimensions:
•Overall frame: 1111⁄16" (H) x 83⁄4" (W) •Required
cutout: 105⁄8" (H) x 75⁄8" (W) •Mounting depth: 35⁄8"
•Mfr. #LSW-6.5 •Sold in pairs
1
(pr.)
$275.00
Order #
50-8530
6 ⁄2" Single Stereo
Ceiling Speaker
1
Perfect for high
performance music
reproduction in ceiling
locations, this speaker
features a dual voice coil
woofer, and dual tweeters,
for stereo music reproduction from a single point. It
is perfect in small areas where two speakers are not
practical. While this appears as one speaker to the
listener, it appears as two independent speakers
to the amplifier system. It is suitable for use in
bathrooms, kitchens and similar areas with
potentially high moisture. Features: •61⁄2" talk filled
polypropylene woofer with butyl rubber surround
•Dual 1⁄2" stereo imaged liquid cooled dome tweeters
•Rustproof aluminum grill •Suitable for painting
•Color coded push terminals accept up to 12AWG
wire Specifications: •Power handing: 10~100W
per channel •Frequency response: 60Hz~21KHz
•Impedance: 6ohm per channel Dimensions:
•Overall frame diameter: 91⁄4" •Required cutout:
8" •Mounting depth: 33⁄8" •Mfr. #LSC-6S
•Sold individually
Order #
50-8520
(ea.)
$93.95
61⁄2" In–Wall
Speaker Pair
Perfect speaker for high
performance music and
voice reproduction from
wall locations. Suitable for
use in bathrooms, kitchens
and similar areas with
potentially high moisture.
These speakers are suitable
for horizontal or vertical mount in wall surfaces
and vaulted ceilings. Features: •61⁄2" talc filled
polypropylene woofer with urethane surround •3⁄4"
pivotal dome tweeter •Rustproof aluminum grills
•Suitable for painting •Color coded push terminals
accept up to 12AWG wire •Knockout for JobSite flush
mount IR receiver Specifications: •Power handling:
10~75W •Frequency response: 65Hz~20KHz
•Impedance: 8ohm Dimensions: •Overall frame:
1111⁄16" (H) x 83⁄4" (W) •Required cutout: 105⁄8" (H) x 75⁄8"
•Mounting depth: 33⁄8" •Mfr. #LSW-6 •Sold in pairs
Order #
50-8525
(pr.)
$165.00
Ceiling Speaker
Pre-Construction Bracket Pairs
(pr.)
$275.00
61⁄2" Home Theater
In-Wall Speaker
Perfect speaker for
high performance
music reproduction
from wall locations,
these are also ideal as
main or surround speakers in typical home
theater environments. Suitable for use in areas with
potentially high moisture, these speakers are intended
for vertical mount. Features: •Dual 51⁄4" mica filled
polypropylene woofers with butyl rubber surrounds
•1" liquid cooled dome tweeter •Configurable as a
main or surround speaker •Rustproof aluminum grill
•Suitable for painting •Color coded push terminals
accept up to 12AWG wire •Knockout for JobSite flush
mount IR receiver Specifications: •Power handing:
10~150W •Frequency response: 45Hz~21KHz
•Impedance: 8ohm Dimensions: •Overall frame:
141⁄2" (H) x 81⁄4" (W) •Required cutout: 131⁄4" (H) x
71⁄8" (W) •Mounting depth: 25⁄8" •Mfr. #LST-RLS
•Sold individually
Order #
50-8535
(ea.)
$175.00
61⁄2" Center Channel
In-Wall Speaker
Perfect for high
performance music
reproduction, this
unit is designed for
center channel use.
Magnetically shielded
woofers and tweeter enable close proximity to
any type of video display device. Narrow driver
arrangement allows installation between 16" spaced
studs. Features: •Dual 51⁄4" mica filled polypropylene
woofers with butyl rubber surrounds •1" liquid cooled
dome tweeter •Dialog selector •3dB high frequency
cut selector •Rustproof aluminum grills •Suitable
for painting •Color coded push terminals accept up
to 12AWG wire •Knockout for JobSite flush mount IR
receiver Specifications: •Power handing: 10~150W
•Frequency response: 45Hz~21KHz •Impedance:
8ohm Dimensions: •Overall frame: 141⁄2" (W) x
81⁄4" (H) •Required cutout: 131⁄4" (W) x 71⁄8" (H)
•Mounting depth: 31⁄8" •Mfr. #LST-CTR
•Sold individually
Order #
50-8540
Specifically designed for Niles/JobSite ceiling speaker models, these rugged bracket
assemblies greatly ease installation of ceiling speakers in new construction applications.
Simply attach to ceiling joists prior to drywall installation for easy location and secure
mounting of speaker systems during final installation. 3⁄8" lip provides perfect finished edge for
drywall thickness. Removable wings Order #
Mfr. #
Compatible speaker size
(pr.)
allow screw or nail mounting to
50-8555
NCB-6
61⁄2"
$25.95
virtually any stud or joist spacing.
50-8556
NCB-5
51⁄4"
21.95
Sold in pairs.
50-8557
NCB-8
8"
29.95
(ea.)
$189.00
section
3
Indoor/Outdoor
Loudspeaker Pairs
Two-way speaker
systems provide home
theater quality sound
in or out of doors.
High excursion woofers,
coupled with high
efficiency dome tweeters provide wide frequency
response with tremendous detail. The glass and
mineral filled polypropylene enclosures are fully
weather and UV resistant. Features: •Mica filled
polypropylene woofers •Liquid cooled dome tweeters
•Stainless steel and brass hardware •Rustproof
aluminum grills •Recessed five–way binding
posts •Included mounting bracket •Nominal
impedance: 8ohm •White color •Sold in pairs
•See www.mcminone.com for complete specifications
Order #
Mfr. # Woofer
50-8545 5"
LSO-5
50-8546 5"
LSO-6
50-8547 51⁄4"
LSO-7
50-8548 61⁄2"
LSO-8
Power
Capacity
5~75W RMS
Dimensions
(H) x (W) x (D)
91⁄4" x 7" x 65⁄8"
(pr.)
$151.00
10~100W RMS
91⁄4" x 7" x 65⁄8"
195.00
10~100W RMS
11" x 83⁄8" x 79⁄16"
269.00
10~150W RMS
13" x 9 ⁄8" (x 9"
319.00
7
Two-Way Rock Speaker
Attractive compact
garden landscaping
speaker is constructed
from fiberglass strengthened
plastic, providing
high-quality sound in a
natural looking stone enclosure. Features: •51⁄4"
injection molded polypropylene cone woofer with butyl
rubber surround •3⁄4" liquid cooled polycarbonate dome
tweeter •Multi-layer fiberglass construction •Weather
and UV resistant •Rust proof aluminum grill
•Attached 36" direct bury cable with waterproof wire
nuts Specifications: •Power capacity: 10~100WRMS
•Frequency response: 70Hz~21KHz •Impedance:
8ohm •Gray color •Dimensions: 91⁄2" (H) x 10" (W) x
81⁄2" (D) •Mfr. #LSR-5 •Sold individually
Order #
50-8550
(ea.)
$125.00
Two-Way Rock Speaker
Attractive compact
garden landscaping
speaker is constructed
from fiberglass
strengthened plastic,
providing high quality
sound in a natural
looking stone enclosure.
Features: •61⁄2" mica
filled polypropylene cone woofer with butyl
rubber surround •1" liquid cooled soft dome tweeter
•Multi-layer fiberglass construction •Weather and
UV resistant •Rust proof aluminum grill •Attached
36" direct bury cable with waterproof wire nuts
Specifications: •Power capacity: 10~150W RMS
•Frequency response: 60Hz~21KHz •Impedance:
8ohm •Gray color •Dimensions: 12" (H) x 14" (W) x
11" (D) •Mfr. #LSR-6 •Sold individually
Order #
50-8551
(ea.)
$155.00
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
71
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
3
Order #
50-8515
1
C52_pg_072
8/7/07
2:40 PM
Page 72
Home Theater
Complete IR
Repeater Kit
section
3
Complete
plasma proof
IR repeater
kit includes all
necessary components for
control of up to five devices from a remote
location. Kit includes: •One IR-CB2 connecting
block with power supply •Five IR-E1 emitters
•One IR-SMR IR receiver •Mfr. #IR-KIT
#50-8470
3
Order #
50-8610
Compact Surface
Mount IR Receiver
#50-8475
Speaker Selectors
Table top selectors are ideal for
distributed audio systems where multiple speaker
pairs are to be connected to a single amplifier.
Available in four or six zone configurations, with
or without volume controls for each zone. Features:
•Switchable resistor type impedance protection,
allowing full frequency response •Detachable
snap-lock connectors •Custom room labels •Non-skid
rubber feet •12-step rotary volume controls on each
zone (applicable models) •100W per channel power
capacity Specifications: •Frequency response:
20Hz~20KHz •Minimum impedance
to amplifier: 8ohm
Order #
50-8470
50-8471
50-8475
50-8476
Mfr. #
S4
S6
S4VC
S6VC
Zones
four
six
four
six
Volume Controls
no
no
yes
yes
(ea.)
$84.95
115.00
239.00
285.00
Wall Mount
IR Receivers
Plasma proof IR receiver rejects
interference common of flat panel
displays, CFL lighting and indirect
sunlight. Single gang decora style
mounts in standard electrical boxes
or low voltage brackets and may be
combined with other low voltage
devices behind a multiple gang
decora plate. Features: •Extended
receiving range •Red status LED •Blue talkback LED
•Snap-and-lock connector •Includes matching decora
faceplate •Requires two pairs of Cat 5 or
higher wire •Depth behind faceplate: 23⁄4"
•Mfr. #IR-WMR
Order #
50-8591
50-8592
50-8595
Color
White
Bone
Almond
(ea.)
$65.00
65.00
65.00
Flush Mount IR Receiver
Plasma proof IR receiver rejects
interference common of flat panel
displays, CFL lighting and
indirect sunlight. Compact
flush mount design is perfect
for installation into wall
plates, entertainment system panels or any other
flat surface. All JobSite in-wall speaker systems
include a knock-out for installation of this receiver.
Features: •Receiving range: 18'~30' depending
remote •Works up to 30° off axis •Includes black and
white bezels •Includes attached 10' connecting cable
•Requires two pairs of Cat 5 or higher wire •Front
bezel diameter: 3⁄4" •Required mounting hole: 1⁄2"
•Mounting depth: 25⁄16" •Mfr. #IR-FMR
Order #
50-8600
(ea.)
$89.95
NET 30
Terms
72
Order Online
www.mcmelectronics.com
(kit)
$189.00
Plasma proof IR receiver rejects
interference common of flat panel
displays, CFL lighting and indirect
sunlight. Simple self-adhesive
surface mounting allows the unit to
be located on virtually any smooth clean surface.
Features: •Red status LED •Blue talkback LED
•Receiving range: 18'~30' depending remote
•Works up to 30° off axis •Black color •Includes
attached 10' connecting cable •Requires two pairs of
Cat5 or higher wire •Dimensions: 1⁄2" (H) x 11⁄16" (W) x
21⁄16" (D) •Mfr. #IR-SMR
Order #
50-8605
(ea.)
$82.95
Single Zone
IR Connecting
Block
Intended as
the hub of the
complete JobSite Plasma proof IR repeater system,
this connecting block provides point of connection
for emitters, receivers and power supply.
Features: •Single zone control •Single IR receiver
input •Four IR emitter outputs •Snap lock receiver
inputs •3.5mm emitter outputs •Includes UL listed
12VDC power supply •Dimensions: 11⁄4" (H) x
43⁄4" (W) x 2" (D) •Mfr. #IR-CB1
Order #
50-8615
Intended as
the hub of the
complete JobSite Plasma
proof IR repeater system, this
connecting block provides point of
connection for emitters, receivers and power supply.
Features: •Four zone control •Four IR receiver
inputs •Eight IR emitter outputs •Selectable high/low
emitter output for use with high output, single and
dual emitters •12VDC output for sensing status or
discrete IR commands •Contact closure triggered by
sensing status or discrete IR commands •Snap lock
receiver inputs •3.5mm emitter outputs •Includes UL
listed 12VDC power supply •Dimensions: 11⁄4" (H) x
71⁄16" (W) x 3" (D) •Mfr. #IR-CB4
Order #
50-8625
Intended as the
hub of the complete JobSite Plasma proof IR
repeater system, this connecting block provides point
of connection for emitters, receivers and power supply.
Features: •Two zone control •Two IR receiver inputs
•Five IR emitter outputs •Selectable high/low emitter
output for use with high output, single and dual
emitters •Snap lock receiver inputs •3.5mm emitter
outputs •Includes UL listed 12VDC power supply
•Dimensions: 11⁄4" (H) x 511⁄16" (W) x 2" (D)
•Mfr. #IR-CB2
Order #
50-8620
(ea.)
$89.95
Six Zone IR
Connecting
Block
Expander
Increases a
single input on the JobSite connecting block from
one to six. Greatly reduces clutter in areas where
numerous IR sensors are placed some distance from
the connecting block. Instead of home running all
sensors to the block, they can be hubbed at this
expander, with a single run to the block. Features:
•Snap lock connectors •Six IR receiver inputs
•Talkback LED indicates system status •Dimensions:
11⁄4" (H) x 71⁄16" (W) x 11⁄4" (D) •Mfr. #IR-CBE6
Order #
50-8630
(ea.)
$49.95
Two Zone
IR Connecting
Block
(ea.)
$49.95
Dual IR Emitter
Designed to provide IR
signal to source equipment
from remote location, this
emitter attaches directly to
the IR window on system
equipment. Specially designed pass-through housing
does not block IR window, allowing local control as
normal. Dual emitters on a single plug increase the
total number of emitters that may be connected to a
single control block. Features: •10' attached cable
on each emitter, terminated with a single 3.5mm two
conductor plug •Emits IR signal up to 48" line of
sight •Peel-and-stick self adhesive mounting •Ultra
compact size (each emitter): 3⁄16" (H) x 5⁄16" (W) x 1⁄2" (D)
•Mfr. #IR-E2
Order #
50-8636
(ea.)
$16.25
(ea.)
$64.95
IR Emitter
Designed to provide IR signal to
source equipment from remote
location, this emitter attaches
directly to the IR window on
system equipment. Specially designed pass-through
housing does not block IR window, allowing local
control as normal. Features: •10' attached cable
terminated with 3.5mm two conductor plug •Cable
length may be increased up to 40' with 18AWG cable
•Cable length may be increased up to 200' with
16AWG cable •Emits IR signal up to 48" line of
sight •Peel-and-stick self adhesive mounting •Ultra
compact size: 3⁄16" (H) x 5⁄16" (W) x 1⁄2" (D) •Mfr. #IR-E1
Order #
50-8635
Four Zone
IR Connecting
Block
(ea.)
$8.99
High Output IR Emitter
Designed to provide IR signal to
source equipment from remote
location, high output emitter
mounts inside equipment racks and floods the
entire cavity with the IR pulse, thus controlling
all equipment in the rack. This serves as a suitable
alternative to locating individual emitters on every
piece of equipment. Features: •10' attached cable
terminated with a 3.5mm two conductor plug •Emits
IR signal up to 18'~30' line of sight •Peel-and-stick
self adhesive mounting •Dimensions: 3⁄8" (H) x
1" (W) x 21⁄4" (D) •Mfr. #IR-E1HO
Order #
50-8640
(ea.)
$22.50
C52_pg_073
8/7/07
2:46 PM
Page 73
Home Theater
Auto-Muting
In-Wall Volume Control
Stereo In-Wall
Volume Controls
Order #
50-8645
50-8646
50-8647
Color
White
Bone
Ivory
(ea.)
$35.95
35.95
35.95
Order #
50-8650
50-8651
50-8652
Color
White
Bone
Ivory
(ea.)
$69.95
69.95
69.95
All Weather
Enclosed
Stereo Volume Control
All Weather
Stereo In-Wall Volume Control
In-wall control provides precise
volume adjustment in all weather
and high moisture environments.
Control utilizes high quality
multitap audio transformers and
smooth 12 position rotary switches
to provide full range level control.
It is designed for use in distributed
audio systems, primarily those involving outdoor and
landscaping (rock) speaker systems, as well as in-wall
and ceiling speakers in high humidity environments.
Impedance matching design allows of up to 16 pairs
of 8ohm speakers to be connected to a single stereo
amplifier, and appear as a 4ohm load. Features:
•Snap-lock connectors accept up to 14AWG wire
•Includes both decora and standard cover plates
•May be mounted in a single gang box or low
voltage bracket Specifications: •Power capacity:
100W/200W RMS/peak •Impedance matching
settings: x1, x2, x4 and x8
Order #
50-8648
Includes features common to all
JobSite in wall volume controls, plus
the added capability of auto-reset
muting. This control automatically
mutes at power-up, which eliminates
the potential of accidentally sending
music to unwanted areas especially
near bedrooms or out doors.
Impedance matching design allows of up to 16 pairs
of 8ohm speakers to be connected to a single stereo
amplifier, and appear as a 4ohm load. Features:
•Snap-lock connectors accept up to 14AWG wire
•Includes both decora and standard cover plates
•May be mounted in a single gang box or low
voltage bracket Specifications: •Power capacity:
100W/200W RMS/peak •Impedance matching
settings: x1, x2, x4 and x8
(ea.)
$54.95
3
Muting Volume
Control
Connection
Terminal
This terminal
block is required when connecting multiple JobSite
Muting Volume Controls. Features: •Safely connect
up to four speaker pairs to a single amplifier or
receiver •100W RMS per channel power handling
capability •Built-in protection circuit •Includes
customized room labels •Snap and lock connectors
accept up to 14AWG wire •Includes 12VDC power
supply •Dimensions: 3" (H) x 67⁄8" (W) x 11⁄4" (D)
Order #
50-8660
Perfect for surface mounting
on exterior walls, or directly
onto 3⁄4" PVC conduit. Control
provides precise volume
adjustment in all weather
and high moisture
environments. Control utilizes
high quality multitap audio
transformers and smooth 12 position rotary switches
to provide full range level control. It is designed for
use in distributed audio systems, primarily those
involving outdoor and landscaping (rock) speaker
systems. Impedance matching design allows of up
to 16 pairs of 8ohm speakers to be connected to a
single stereo amplifier, and appear as a 4ohm
load. Features: •Snap-lock connectors accept up
to 14AWG wire •Includes both decora and standard
cover plates •May be mounted in a single gang box or
low voltage bracket Specifications: •Power capacity:
100W/200W RMS/peak •Impedance matching
settings: x1, x2, x4 and x8
Order #
50-8649
section
(ea.)
$68.95
3
In-wall volume controls utilize high
quality multitap audio transformers
and smooth 12 position rotary
switches to provide full range level
control. They are designed for use in
distributed audio systems, primarily
those involving in-wall and ceiling
speaker systems. Impedance
matching design allows up to 16 pairs of 8ohm
speakers to be connected to a single stereo amplifier,
and appear as a 4ohm load. Features: •Snap-lock
connectors accept up to 14AWG wire •Includes
both decora and standard cover plates •May be
mounted in a single gang box or low voltage bracket
Specifications: •Power capacity: 100W/200W
RMS/peak •Impedance matching settings:
x1, x2, x4 and x8
(ea.)
$55.95
Volume
Control
Connection
Terminal
This terminal
block functions as a convenient hub for home run
wiring. Connections are provided for up to eight
impedance matching volume controls, with a single
output pair for connection to the amplifier. Passive
device requires no power. Features: •100W RMS per
channel power handling capability •Snap and lock
connectors accept up to 14AWG wire •Dimensions:
3" (H) x 67⁄8" (W) x 11⁄4" (D)
Order #
50-8665
(ea.)
$42.95
All Weather Enclosed Stereo Volume Control
Multi–Zone
Speaker Selectors
Ideal for controlling multiple pairs of installed
speaker systems from a single location. Four
and eight zone models are available with simple
pushbutton on/off control for each zone. Four and
six zone versions feature on/off selectors as well as
12 step volume controls for each zone. Features:
•Rugged 17" wide metal housing (S4DC is 83⁄8")
•Front panel impedance protection switch, with rear
panel override •Suction feet to hold unit firmly to
shelf during use •Removable screw terminal
connections accept up to 14AWG wire •100
room labels to customize to any application
Specifications: •Power capacity: 125W RMS per
channel (all zones combined) •Frequency response:
20Hz~20KHz ±0dB •Dimensions (S4DC): 23⁄16" (H) x
83⁄8" (W) x 61⁄2" (D) •Dimensions (others): 23⁄16" (H) x
17" (W) x 61⁄2" (D)
Order #
50-8400
50-8405
50-8430
Mfr. #
S8DC
S4DC
S6VC
Description
(1–3)
Eight zone
$250.00
Four zone
150.00
Six zone
425.00
with volume controls
50-8435 S4VC Four zone
350.00
with volume controls
(4–11)
$237.50
142.50
403.75
332.50
Perfect for surface mounting on exterior walls, or directly onto 3⁄4" PVC conduit. Includes
features common to all JobSite volume controls, plus the added capability of auto-reset
muting. This control automatically mutes at power-up, which eliminates the potential of
accidentally sending music to unwanted areas especially near bedrooms or outdoors. Note:
Requires V-T4M Muting Volume Control Connection Terminal Features: •Power capacity:
100W/200W RMS/peak
Order #
(ea.)
•Dimensions: 413⁄16" (H) x 3" (W) x
3
3 ⁄8" (D) •Face plate dimensions: 41⁄2" (H) x 23⁄4" (W)
50-8653
$105.00
Slide Style Volume Controls
These stereo in-wall volume controls are designed for use in
distributed audio systems, primarily with in-wall and ceiling
speakers. Slide operation and sleek decora design is consistent
with current electrical device appearance. Models are available
with or without integral IR sensor. IR units allow compatibility
with all SpeakerCraft and most other IR repeating systems.
Features: •Detachable terminal strip, greatly easing
installation •Fits standard electrical boxes and low voltage
brackets •12 step attenuation Specifications: •Power
capacity: 60W RMS •Frequency response: 20Hz~20KHz
•Overall depth: 21⁄2" •Call for larger quantity pricing
Order #
Color
(1-3)
(4-11)
Standard models
50-8250
White
$52.95
$49.55
50-8251
Bone
49.95
46.95
50-8252
Almond
49.95
46.95
50-8253
Black
49.95
46.95
With integral IR receiver
NET 30
50-8260
White
92.95
87.80
Terms
50-8261
Bone
89.95
84.95
50-8262
Almond
89.95
84.95
50-8263
Black
89.95
84.95
#50-8250
OrderToll
Toll
Free
Order
Free
#50-8260
Fax
FAX
73
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C52_pg_074
8/7/07
2:50 PM
Page 74
Home Theater
section
3
3
Impedance Matching
Volume Control
These stereo in-wall volume
controls are designed for use
in distributed audio systems,
primarily with in-wall and
ceiling speakers. Impedance
matching design enables up
to 8 pairs of 8ohm speakers
to be connected to a stereo
amplifier, and appear as a
4ohm load. Models are
available with decora style face plates, or with single
gang steel plate. Features: •Detachable terminal
strip, greatly easing installation •Fits standard
electrical boxes and low voltage brackets •Ten step
attenuation Specifications: •Power capacity: 45W
RMS •Frequency response: 20Hz~20KHz •Overall
depth: 21⁄2" •Call for larger quantity pricing
Order #
50-8220
50-8221
50-8222
50-8223
50-8225
50-8226
Style
Decora
Decora
Decora
Decora
Plate
Plate
Color
White
Bone
Almond
Black
White
Bone
(1-3)
$27.95
27.95
27.95
27.95
27.95
27.95
(4-11)
$25.89
25.89
25.85
25.89
25.89
25.89
Audiophile Grade In-Wall
Volume Controls
These stereo volume
controls are designed for
use in distributed audio
systems, primarily with
in-wall and ceiling speakers.
Resistor based design
provides much improved
frequency response when
compared to conventional
transformer based units. Specially selected
non-inductive, high capacity resistors ensure full
frequency response, with less than 0.5dB variance.
60W and 120W RMS models are available with
decora style face plates, or with single gang steel
plate. Six-piece bulk packs of raw units are also
available, for separate purchase of face plate and
knobs, to simplify inventory control. Features:
•Special push-lock connector for fast connection
without a screwdriver •Fits standard electrical
boxes and low voltage brackets •12 step attenuation
Specifications: •Frequency response: 20Hz~20KHz,
< ±0.5dB •Overall depth: 21⁄2" •Call for larger
quantity pricing
Order #
Style
60W power capacity
50-8230
Decora
50-8231
Decora
50-8232
Decora
50-8233
Decora
50-8235
Plate
50-8236
Plate
50-8239
Six-piece bulk pack
120W power capacity
50-8240
Decora
50-8241
Decora
50-8242
Decora
50-8243
Decora
50-8245
Plate
50-8246
Plate
50-8249
Six-piece bulk pack
Color
(1-3)
(4-11)
White
$33.95 $32.25
Bone
33.95 32.25
Almond 33.95 32.25
Black
33.95 32.25
White
33.95 32.25
Bone
33.95 32.25
159.00 149.00
White
Bone
Almond
Black
White
Bone
38.95 35.95
38.95 35.95
38.95 35.95
38.95 35.95
38.95 35.95
38.95 35.95
189.00 168.00
NET 30
Terms
74
Order Online
www.mcmelectronics.com
Impedance Matching
Volume Control
Volume Control
Accessories
These stereo in-wall volume
controls are designed for use
in distributed audio systems,
primarily with in-wall and
ceiling speakers. Impedance
matching design enables up
to 18 pairs of 8ohm speakers
to be connected to a stereo
amplifier, and appear as
a 4ohm load. Models are
available with decora style face plates, or with single
gang steel plate. Six-piece bulk packs of raw units
are also available, for separate purchase of face plate
and knobs, to simplify inventory control. Features:
•LiftLock™ connector, enables fast connection
without a screwdriver •Fits standard electrical
boxes and low voltage brackets •12 step attenuation
Specifications: •Power capacity: 60W RMS
•Frequency response: 20Hz~20KHz •Overall
depth: 21⁄2"•Call for larger quantity pricing
Specific models of
SpeakerCraft in-wall
volume controls are
available in bulk six-packs,
without wall plates or knobs.
This variation allows large
volume contractors to
stock an endless variety
of color/style combinations,
with reduced inventory
investment. See the listing
of SpeakerCraft volume
controls that include the
“six-piece bulk pack”. Standard volume control knobs
are specially designed for use with SpeakerCraft
captive plates. Setscrew type knobs will work with
virtually any volume control. All component parts
listed below are sold in packages of six. Call for
larger quantity pricing.
Order #
50-8200
50-8201
50-8202
50-8203
50-8205
50-8206
50-8209
Style
Color
Decora
White
Decora
Bone
Decora
Almond
Decora
Black
Plate
White
Plate
Bone
Six-piece bulk pack
(1-3)
$49.95
49.95
49.95
49.95
49.95
49.95
279.00
(4-11)
$47.50
47.50
47.50
47.50
47.50
47.50
265.00
In-Wall
Volume Control
These stereo volume
controls are designed
for use in distributed
audio systems,
primarily with in-wall
and ceiling speakers. Models are available with
decora style face plates, or with single gang steel
plate. Six-piece bulk packs of raw units are also
available, for separate purchase of face plate and
knobs, to simplify inventory control. Features:
•LiftLock™ connector, enables fast connection
without a screwdriver •Fits standard electrical
boxes and low voltage brackets •12 step attenuation
Specifications: •Power capacity: 60W RMS
•Frequency response: 20Hz~20KHz •Overall
depth: 21⁄2" •Call for larger quantity pricing
Order #
50-8210
50-8211
50-8212
50-8213
50-8215
50-8216
50-8219
Style
Color
Decora
White
Decora
Bone
Decora
Almond
Decora
Black
Plate
White
Plate
Bone
Six-piece bulk pack
(1-3)
$36.95
36.95
36.95
36.95
36.95
36.95
185.00
(4-11)
$34.95
34.95
34.95
34.95
34.95
34.95
175.00
This switching device
automatically selects
between two stereo amplifiers
to a single pair of speakers.
It is perfect in situations
where installed speakers are
used with both a local stereo
or home theater system, and
a distributed audio system. Default input-A is
selected when no signal is present. When a signal is
sensed at input-B, the selector automatically switches
to that input. A separate 12VDC, 100mA signal is also
provided to trigger other external devices. Trigger
sensitivity is fully adjustable from 30~300mV. Off
delay (from B back to A after absence of signal) is
adjustable in eight steps from 0.5 seconds to 10
minutes. Relay contacts are 4PDT, with isolated
L/R ground paths. Music power capacity is 100W.
The unit requires 12VDC, AC adaptor is included.
(1-3)
$90.00
(4-11)
$85.50
(1-3)
(4-11)
$4.50
4.50
$4.09
4.09
4.50
4.50
4.50
4.50
4.09
4.09
4.09
4.09
13.95
13.95
13.95
13.95
13.25
13.25
13.25
13.25
13.95
13.95
13.95
13.95
13.25
13.25
13.25
13.25
16.29
16.29
14.95
15.09
Automatic A/B
Line Level Switch
This switching device
automatically selects
between two line level
sources to a single
input. L/R RCA female
input/output connections accommodate left and
right channels, making it perfect for all consumer
electronic devices. Default input-A is selected when
no signal is present. When a signal is sensed at
input-B, the selector automatically switches to
that input. A separate 12VDC, 100mA signal is also
provided to trigger other external devices. Trigger
sensitivity is fully adjustable from 10~100mV. Off
delay (from B back to A after absence of signal) is
adjustable in eight steps from 0.5 seconds to 10
minutes. The unit requires 12VDC,
AC adaptor is included.
Order #
50-8385
Automatic A/B
Speaker Level Switch
Order #
50-8390
Order #
Color
Standard wall plates 6 pkg.
50-8280
White
50-8281
Bone
Decora wall plate cover 6 pkg.
50-8285
White
50-8286
Bone
50-8287
Almond
50-8288
Black
Decora insert 6 pkg.
50-8290
White
50-8291
Bone
50-8292
Almond
50-8293
Black
Captive knob
50-8295
White
50-8296
Bone
50-8297
Almond
50-8298
Black
Knob with set screw
50-8300
White
50-8301
Bone
(1-3)
$90.00
(4-11)
$85.50
Parallel
Connecting Blocks
Ends the problem of multiple
speaker home runs to a single location. The CB
connecting block enables easy connection of four
pairs of speakers, to a single bus. This bus then is
easily connected to the amplifier output. The CBX
expansion blocks can then be added to the connecting
block, providing connection for four additional pairs.
An endless number of CBX blocks may be cascaded
on a single CB block. Compact units have screw holes
for attaching inside the wall, to a stud. Note: This
is a straight parallel connection and no impedance
protection is provided. Impedance matching volume
controls must be used if the overall impedance falls
below the minimum level of the amplifier.
Order #
50-8305
50-8306
Description
CB connecting block
CBX expansion block
(1-3)
$34.50
31.50
(4-11)
$31.95
28.95
C52_pg_075
8/7/07
2:43 PM
Page 75
Home Theater
SmartPath Infrared Repeating System
SmartPath’s easy installation and configuration allow installers to quickly create a pathway of complete A/V system control.
All components are available separately for versatile configuration of any custom system. Emitters and receivers may be
connected with two pairs of 24AWG solid or stranded unshielded twisted pair wire, including standard Cat 5, for distances
up to 1200'. Heavier gauge cable can be used for distances of up to 5000'. A complete system requires the following four
basic components: •At least one infrared receiver •One connecting block •As many emitters as needed to control A/V
components •One DC power supply
Wall Mount “Junction Box”
IR Receivers
Flush Mount
Mini IR Receivers
Attractive receivers include
clearly visible system status and IR
activity LEDs, to provide positive
feedback to the user, and mount in
standard single gang junction boxes
or low-voltage brackets. Decora style
design is compatible with standard
wall plates, single gang plate is included.
EZ-connector terminal block allows simple
connection of unterminated twisted pair wire.
Dimensions: 4" (H) x 11⁄2" (W) x 1" (D)
Compact receivers
require only a 1⁄2" hole,
and may be mounted
flush in cabinets or walls, leaving only a circular
bezel exposed to the room. They may also be mounted
behind the grill of most in-wall speakers. Each
includes a set of four color bezels (almond, black,
bone and white), to match any décor. Also included are
two specially designed ALR (ambient light restrictor)
bezels, for use near plasma displays. Clearly visible
system status and IR activity LEDs provide positive
feedback to the user. Models include an 8' attached
lead, and are available with bare wire connections
or SpeakerCraft’s unique four-conductor 3.5mm plug.
Receivers provide a reception angle of 110° standard,
60° with ALR bezel installed. Dimensions:
•Unit: 15⁄32" (dia.) x 25⁄8" (L) •Cap bezel: 47⁄64" (dia.) x
1
⁄8" (L) •ALR bezel: 47⁄64" (dia.) x 23⁄64" (L)
Mfr. #
IRC-4.0
IRC-4.0
IRC-4.0
IRC-4.0
Color
(1-3)
White $110.00
Bone
110.00
Almond 110.00
Black
110.00
(4-11)
$104.50
104.50
104.50
104.50
(12-up)
$93.50
93.50
93.50
93.50
These units are designed
to block plasma, CFL, EMI,
and ESI noise sources, using
SpeakerCraft’s exclusive
“smart” circuit (patent
pending). The actual sensor
and electronics are separated
into separate “main” and “pick-up” modules,
enabling installation into very tiny spaces of furniture
recesses, monitor panels and under shelves. The
main module houses the status and activity LEDs.
Detachable lead between main and pick-up module
totals 6' in length. The main module has attached
5' lead, terminated with bare wire connections or
SpeakerCraft’s unique four-conductor 3.5mm plug.
Overall reception angle is 100°. Dimensions:
•Pick-up module: 7⁄8" (L) x 13⁄32" (W) x 9⁄32" (D)
•Main module: 29⁄16" (L) x 9⁄16" (W) x 1⁄2" (D)
Order # Mfr. #
Connection (1-3) (4-11) (12-up)
50-8320 IRC-2P2.0 3.5mm plug$150.00 $142.50 $127.50
50-8321 IRC-2P2.1 Bare leads 150.00 142.50 127.50
SmartPath IR System
Power Supplies
Supplies plug directly into
SpeakerCraft terminator
models AT-1.0 or PT-1.0 to
provide power to the entire
IR repeater system. Both
high quality units are
regulated at 12VDC, at the
current rating shown below.
The correct power supply,
with sufficient current
output, must be selected
for the system in place.
To calculate current
requirements, simply
add the current draw of
each device to determine the total current needed.
Current draw of SpeakerCraft devices are
as follows: •IR emitters: 15mA •IR receivers: 6mA
•IR blasters: 150mA •Terminator units AT-1.0 and
PT-1.0 add no additional current draw
Order #
50-8361
50-8362
Mfr. #
PS-2.0
PS-1.0
Current
1200mA
200mA
Amplified Terminator Unit
Order # Mfr. # Connection
(1-3)
(4-11) (12-up)
50-8310 IRC-1.0 3.5mm plug $120.00 $114.00 $102.00
50-8311 IRC-1.1 Bare leads
120.00 114.00 102.00
Ultra Compact Plasma
Block Mini IR Receivers
(1-3)
$55.00
13.00
(4-11)
$52.25
12.35
3
The AT-1.0 amplified
terminator unit functions
as central control unit for
large multi room IR systems,
allowing connection of the
power supply, IR emitters
and receivers. EZ-connect
terminal block allows connection of multiple daisy
chained receivers. Four-conductor 3.5mm jack accepts
connection of one similarly equipped receiver. This
unit has a total of four outputs that will drive four
emitters, or two emitters and two blasters. The
EMX-1.0 expansion terminator (#50-8350) allows
connection of additional emitters. 5~24VDC status
input accepts status signal from IR controlled
equipment, and provides visual indication
at each IR receiver.
Order #
50-8335
Mfr. #
AT-1.0
(1-3)
$74.95
(4-11)
$71.25
Passive Terminator
Surface Mount
Mini IR Receivers
Compact receivers are
intended for surface
mounting on cabinets,
TV sets or the wall, with attached double sided
adhesive. Clearly visible system status and IR
activity LEDs provide positive feedback to the
user. Models are available in black or white, with 8'
attached lead, terminated with bare wire connections
or SpeakerCraft’s unique four-conductor 3.5mm plug.
Black version, with stripped leads is also available
with the ALR (ambient light restrictor) lens for use
near plasma displays. Standard receivers provide a
reception angle of 110°, the ALR version is 60°.
Dimensions: 29⁄16" (L) x 17⁄32" (W) x 9⁄16" (L)
Order #
50-8315
50-8316
50-8317
50-8318
50-8319
Mfr. #
IRC-2.0
IRC-2.0
IRC-2.1
IRC-2.1
IRC-2.1
ALR
Color
White
Black
White
Black
Black
Connection
3.5mm plug
3.5mm plug
Bare leads
Bare leads
Bare leads
(1-3) (4-11) (12-up)
$121.00 $115.25 $103.15
121.00 115.25 103.15
121.00 115.25 103.15
121.00 115.25 103.15
121.00 115.25 103.15
Shelf Top IR
Receivers
Compact
receivers are
housed in an
attractive case
to sit on the
surface of a
cabinet or shelf. Clearly visible system status and IR
activity LEDs provide positive feedback to the user.
Models include an 8' attached lead, terminated with
SpeakerCraft’s unique four-conductor 3.5mm plug.
Unit is available in standard configuration, or with
the ALR (ambient light restrictor) bezels, for use
near plasma displays. Standard receivers provide
a reception angle of 110°, ALR version is 60°.
Dimensions: 11⁄8" (L) x 33⁄16" (W) x 11⁄16" (D)
Order #
50-8325
50-8326
Mfr. #
IRC-3.0
IRC-3.0 ALR
(1-3)
$75.00
75.00
(4-11)
$71.25
71.25
(12-up)
$63.75
63.75
The PT-1.0 passive
terminator functions as
central control unit for
compact, single room IR systems, allowing connection
of the power supply, up to two IR emitters and a
single IR receiver, equipped with a four-conductor
3.5mm plug. 5~24VDC status input accepts status
signal from IR controlled equipment, and provides
visual indication at the IR receiver.
Order #
50-8340
Mfr. #
PT-1.0
(1-3)
$10.30
(4-11)
$9.79
Emitter Expansion
Terminator
The EMX-1.0
expansion terminator
expands the number
of outputs of the AT-1.0
amplified terminator
unit. This passive device simply plugs into the
emitter output of the AT-1.0, and provides up to
ten emitter outputs. A feed through output is also
provided, allowing multiple EMX-1.0s to be cascaded.
Includes 12" cable for connection to the AT-1.0.
Order #
50-8350
Mfr. #
EMX-1.0
(1-3)
$20.00
(4-11)
$19.00
Break Out Terminator
The BOT-1.0 breakout
terminator provides
bare wire connection to
SmartPath IR receivers
that are equipped with
SpeakerCraft’s standard four-conductor 3.5mm plug.
This allows plug terminated receivers to be connected
to the EZ-connect terminal blocks, as well as other
brand three and four wire systems.
Order #
50-8345
Mfr. #
BOT-1.0
(1-3)
$9.29
(4-11)
$8.82
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
75
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
3
Order #
50-8330
50-8331
50-8332
50-8333
section
C52_pg_076
8/7/07
2:36 PM
Page 76
Home Theater
Use to adapt
components for
use with other
equipment, or to
extend existing
leads. Sets include:
•PTP-1.0: Set of six,
12" 2-conductor cables,
male to male 3.5mm plugs •PTP-8: Set of six,
8' 2-conductor cables, male to male 3.5mm plugs
•PTJ-40: 40' 2-conductor cable, male to female 3.5mm
plugs •QIX-1.0: 15' 4-conductor cable, male
to female 3.5mm plugs •SAC-1.0: Diode protected “Y”
cable, single female to two male 3.5mm plugs, allows
connection of one emitter to two sources •PTS-3:
Set of six, 36" 2-conductor cables, male 3.5mm plug
to stripped leads •STS-4: Set of six, 48" 2-conductor
cables, barrel type power plug to stripped leads.
section
3
3
Complete SmartPath
IR Repeater System
Take the guess work out
of setting up a typical one
room system with this
complete IR repeater kit,
everything is included in
one convenient package.
System includes: •One
IRC-3.0 shelf top receiver
•One AT-1.0 amplified
terminator unit •One
PS-1.0 power supply
•Four IRE-1.0 IR emitters
Order #
50-8363
Mfr. #
IRC-3.0 KIT
SmartPath
Connecting Cables
(1-3)
$205.00
(4-11)
$194.75
Order #
50-8372
50-8373
50-8374
50-8375
50-8376
50-8377
50-8378
Mfr. #
PTP-1.0
PTP-8
PTJ-40
QIX-1.0
SAC-1.0
PTS-3
STS-4
(1-3 sets)
$20.00
30.00
48.00
8.50
8.50
12.00
12.00
(4-11 sets)
$19.00
28.50
45.60
8.08
8.08
11.40
11.40
(12 sets -up)
$17.00
25.50
40.80
7.23
7.23
10.20
10.20
Standard IR Emitters
Compact sensors attach
via included double sided
adhesive, and may be
mounted near equipment
to be controlled. Multiple
configurations are available
to suit a variety of
applications. Dual emitter units allow placement
in front of two pieces of equipment, from only one
plug connection. Units with visible LEDs provide
visible feedback of presence of IR signal. Each
includes an attached 8' lead, terminated with
a two-conductor 3.5mm plug.
Order #
50-8356
50-8357
50-8358
Mfr. #
IRE-1.0
IRE-2.0
IRE-3.0
50-8359 IRE-4.0
Description
(1-3) (4-11) (12-up)
Single emitter $10.30 $9.79 $8.76
Dual emitter
17.00 16.15 14.45
Single emitter 10.30
9.79
8.76
w/visible LED
Dual emitter
17.00 16.15 14.45
w/visible LED
Micro Mini IR Emitter
Extremely compact IR
sensor is only slightly
larger diameter than its
connection cable, and
can be placed inside the actual component, near
the IR sensor. This emitter will “blast” the entire
chassis, ensuring the equipment IR sensor will receive
the signal. It is a great alternative to “untidy” front
panel emitters. Includes 8' lead terminated with
two-conductor 3.5mm plug.
Order #
50-8355
Mfr. #
IRE-0.5
(1-3)
$30.00
(4-11)
$28.50
(12-up)
$25.50
High Power IR Blaster
Designed for installation
into equipment rack,
this unit is intended to
provide sufficient output
to control all components.
The unique 3" wand
features two high output
IR emitters “flooding”
the rack with the remote signal. The wand can
be adjusted above or below a rack of components to
suit specific situation. Attached 8' lead is terminated
with a two-conductor 3.5mm plug.
Order #
50-8360
Mfr. #
IRE-5.0
(1-3)
$29.50
(4-11)
$28.03
(12-up)
$25.08
NET 30
Terms
76
Order Online
www.mcmelectronics.com
Octagonal Light
Collector Lens
IR lens is designed to attach to
equipment or remote mounted IR
receivers to improve reliability of
IR reception. Multi-array mirror
system provides 90° reflection
angle, insuring equipment will “see”
the IR emitter. Sold in packages of ten.
Order # Mfr. # (1-3 pkgs.) (4-11 pkgs.) (12 pkgs.-up)
50-8370 ILC-1.0 $18.00
$17.10
$15.30
Prevents IR signals
from interfering with
other components. Fits over SmartPath IR emitters
or components IR sensor window. Units measure
1" x 2" and may be trimmed to fit.
Mfr. #
IR SHIELD
(1-3)
$2.00
(4-11)
$1.90
(12-up)
$1.70
Keystone Mount
3.5mm Connector
This keystone
insert features a
standard 3.5mm
three-conductor
female jack which
may be used in two
or three conductor applications. It is ideal any
time a 3.5mm connector is needed at a wall plate.
Rear mounted IDC connector allows simple, fast
connection to unterminated Cat 5 cable, or any
22~24AWG solid or stranded, UTP or shielded wire.
Maximum voltage: 24VAC/DC, 1A. Applications:
•Remote location of headphone jacks •Remote
microphone connections •Remote input from PC
sound card, MP3 player or iPod™ •IR repeater
connection •Remote triggering of A/V components
•Low voltage DC connection •Sold individually
Order #
50-7753
Intended for use when in-wall type controls are
not practical, this control is ideal for use with
free standing remote speaker systems. Features:
•Removable terminal strip for greatly eased
installations •12 step attenuation •Suction
cup feet to hold the unit secure during use
Specifications: •Power capacity: 60W RMS
•Frequency response: 20Hz~20KHz •Dimensions:
Overall depth: 2.19" (H) x 8.5" (W) x 6.5" (D)
•Call for larger quantity pricing
Order #
50-8275
(1-3)
$6.99
(4-up)
$5.95
(1-3)
$92.95
(4-11)
$87.60
Outdoor Volume Controls
Specifically designed for
outdoor applications, these
volumes controls feature
stainless steel hardware
and a PVC enclosure, and
are ideally suited for use
with landscaping “rock”
speaker systems. The
housing attaches to standard
3
⁄4" PVC conduit for simplified watertight installation.
Resistor based design provides improved frequency
response when compared to conventional transformer
based units. Specially selected non-inductive, high
capacity resistors ensure full frequency response,
with less than 0.5dB variance. Features: •Special
push-lock connector for fast connection without
a screwdriver •Fits standard electrical boxes
and low voltage brackets •12 step attenuation
Specifications: •Power capacity: 60W •Frequency
response: 20Hz~20KHz, < ±0.5dB •Overall depth:
21⁄2" •Call for larger quantity pricing
Order #
50-8270
50-8271
Emitter Cover
Order #
50-8371
Free Standing Stereo Volume Control
Color
Gray
White
(1-3)
$69.95
69.95
(4-11)
$65.95
65.95
In–Wall A/B Speaker Switch
Simple pushbutton A/B operation
allows selection of two speaker
pairs from a single amplifier, or
a single pair of speakers to select
between two separate sources.
Ideal when a pair of in–wall or
ceiling speakers is needed for a local
stereo or home theater system, and
whole house audio. Mounts in standard single
gang electrical boxes or low voltage brackets, units
include decora cover plate and all hardware.
Order #
50-8440
50-8441
50-8442
50-8443
Description
White
Bone
Almond
Black
(1–3 kits) (4–11 kits)
$34.95
$33.20
34.95
33.20
34.95
33.20
34.95
33.20
Three-Way Audio/Video Switch Box
Tabletop control box allows selection of multiple A/V
sources. Ideal when connecting several devices, such
as CCTV cameras, camcorders, VCRs, laser disk
players and satellite receivers to a single video
monitor or VCR. Accommodates video and left and
right audio, all connections are all RCA type female.
Metal case has non-skid rubber feet and stays
securely in place. Dimensions: 6.9" (W) x 2.2" (H) x
3.9" (D). Sloped front, black color.
Order #
50-6195
(1-5)
$18.49
(6-9)
$17.02
(10-up)
$14.27
C52_pg_077
8/7/07
2:31 PM
Page 77
“Plasma–Proof” Infrared Remote Control Extender Systems
Infrared extenders allow IR controlled items to be operated over large areas, or from different rooms. Package consists of an
IR sensor/processor and emitter, which is placed near the device to be controlled. These two components may be connected
with any type of wire, including single pair telco, zip cord or speaker wire. Use of narrow band technology, and proprietary
manufacturing techniques, renders these units virtually interference-proof, with greatly increased range. This allows these
units to reliably operate in direct sunlight, and in close proximity to problematic plasma display monitors. Additional IR
sensor/processors may be added, allowing operation from more than one area. Additional emitters may also be added,
to allow control of multiple components.
Remote Extender with
In–Wall Target
Order #
50-16860
50-16861
Description
Complete system
Additional target
(1–3)
$119.00
94.95
(4–up)
$101.25
80.75
Order #
50-16865
50-16866
Description
Complete system
Additional target
Complete
infrared
extender
system includes a compact IRBug emitter, power
supply, and plasma proof IR target. The target is
mounted in its own separate enclosure, allowing easy
placement on shelves or on top of sets. A front panel
bi-color LED indicates system status and indicates the
reception of a command from the IR remote.
Description
Complete system
Additional target
(1-3)
$149.00
129.00
(4-up)
$126.50
109.00
Egor Tabs™
Adhesive Tabs
Specifically
designed
adhesive tabs
for attaching
IR emitters to
the front of
electronic
equipment. Greatly reduces future service calls
due to emitters falling off of equipment. Features:
•High strength tabs provide greater hold ability than
cyanoacrylate glues such as Super Glue™ •Fast, easy
peel-and-stick application •Transparent to the
infrared spectrum •100% hidden from view once
applied •Easily removable without residue
•Dimensions: 19mm x 6mm •Sold in packages of ten
Order #
50-8380
(4-up)
$97.95
80.75
Complete infrared
extender system
includes a compact IRBug emitter, power supply, and
plasma proof IR target. The extremely compact target
is housed in a 5⁄8" diameter threaded housing, and
includes status and talkback LEDs. It is perfect for
mounting in speaker baffles, behind grill cloths, in
wall plates and panels. White opaque cap allows
infrared signal to pass, yet makes the target invisible
when mounted on a white surface.
Order #
50-16875
50-16876
Description
Complete system
Additional target
(1-3)
$149.00
129.00
(4-up)
$126.50
109.00
Six Input Line
Level Stereo
Source Selector
Order #
50-5725
Compatible with the
output of most infrared
repeaters, this device emits
higher signal output for nearly
three times the distance
coverage. Additionally, with this units wide radiation
angle, this unit will be “seen” by devices over a
much larger area. Base is 1⁄2" diameter and includes
adhesive pads for easy mounting.
(1-3)
$6.50
(4-up)
$5.72
IR Remote
Extender with
Stealth™
Target
Complete infrared
extender system
includes a
compact IRBug emitter, power supply, and plasma
proof IR target. By separating the infrared detector,
and electronic circuitry into two separate components,
the size of the visible component is reduced to
virtually invisible. This is ideal for use in difficult,
appearance critical situations.
Order #
50-16880
50-16881
Description
Complete system
Additional target
(1-3)
$169.00
139.00
(4-up)
$145.00
119.00
Miniature Infrared
“Stick” Emitter
Mounts directly over
existing components IR
sensor. Mini size allows
discrete placement.
Adhesive backing
allows easy placement.
May be used as either an isolated or feed-through
type. Dimensions: 7⁄16" x 7⁄16" x 3⁄16", lead length 6".
Order #
50-5647
(ea.)
$10.09
Ground loop problems
in A/V systems normally
appear as hum in
speakers or horizontal bars on
video monitors. These problems typically
occur when multiple components receive AC power
from different locations, or because CATV, satellite
or antenna systems provide a separate ground
point. This isolator solves that problem by providing
ground path isolation between components,
while maintaining full frequency response.
Features: •Rugged steel enclosure •RCA input and
output connections •Fully independent L/R channels
Specifications: •Frequency Response: 10Hz~50kHz
•THD: 0.01% •Dimensions: 1.50" (H) x 3.50" (W) x
2.50" (D) •Passive device, requires no power
(ea.)
$57.70
Back
(pkg.)
$4.99
High Output
Infrared Emitter
3
Dual Channel
Ground Loop Isolator
•Accommodates six
sources •RCA type
phono jacks •6" (W) x
2.75" (H) x 5" (D)
Input Source
Switch Boxes
Order #
50-6465
(1-3)
$115.00
94.95
IR Remote
Extender with
MicroMount
Target
Shelf Top
Remote
Extender
Order #
50-16870
50-16871
Complete infrared
extender system
includes a compact
IRBug emitter,
power supply, and plasma proof ceiling mount IR
target. Unique target is designed for low profile
insertion into a 1" diameter hole in drywall or most
other surfaces. Ceiling mounting allows excellent
360° access Add additional targets to control device
from multiple locations. White color.
section
3
Complete infrared extender
system includes a compact
IRBug emitter, power supply,
and plasma proof in–wall
mounted IR target. Add
additional targets to control
device from multiple
locations. Wall mount targets
occupy standard single gang space, and are intended
for use with conventional Decora style cover plates.
White color.
Remote Extender
with Ceiling
Mounted Target
Home Theater
Order #
50-9040
Top
(1-3)
$29.95
(4-up)
$24.95
Tabletop control box
allows selection of multiple
input sources. Ideal when connecting several
audio devices, such as CD players, VCRs, laser
disk players and satellite receivers to home stereo
equipment. Models available to select from three,
four or five sources. Internal PC board design provides
quiet, reliable operation. All connections are all RCA
type female. Metal case has non-skid rubber feet and
stays securely fixed in place. Dimensions: 6.9" (W) x
2.2" (H) x 3.9" (D).
Order #
50-6170
50-6175
50-6180
Positions
Three
Four
Five
(1-5)
$14.25
15.49
16.50
(6-9)
$13.03
14.45
15.27
(10-up)
$10.98
11.92
12.10
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
77
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C52_pg_078
8/7/07
2:36 PM
Page 78
Home Theater
section
3
Front
3
Phono Preamp
with Four Position Input Selector
24 Bit/96K D/A Convertor
This compact unit will accept standard coax or
Toslink SPDIF signal, and convert it to line level
audio. It is perfect when there is a need to send
digital audio signal to an amplifier not having digital
inputs, including home audio receivers, prosound
amplifiers and mixing consoles. It is perfect when
an unused digital output on a piece of home theater
equipment needs to be sent to a separate whole house
audio amplifier. Features: •Two Toslink inputs •Two
coax inputs •Four-position input selector with LED
indication •1⁄4" headphone output with adjustable
level •Separate REC and AMP line level L/R RCA
outputs (both fixed level) •LED power indicator
Specifications: •Digital input: 96KHz (standard
SPDIF) •Resolution capability: 24 bit •Amplitude
linearity: 1.06dB •Frequency response: 20Hz~20KHz
•Channel separation: 100dB @ 1KHz •S/N ratio:
103dB •THD: <0.0015% •Digital filter: 82dB
•Headphone output: 700mW, 8~32ohm •Power
requirements: 12VDC, AC adaptor included
•Dimensions: 11⁄2" (H) x 93⁄4" (W) x 41⁄2" (D)
Order #
50-7774
(1-3)
$99.95
(4-up)
$84.95
Front
Phono
Preamplifier/USB
Interface
This high quality
USB audio interface
with standalone RIAA
Back
phono preamp acts as
an interface between
your computer and
a wide variety of
analog and digital
sources. Analog
inputs are switchable
between phono and line level signals and a low cut
filter removes rumble and wind noise while leaving
the audio pristine. The front panel USB monitor/
headphone 1⁄8" jack and the optical output on the rear
panel can monitor audio output from your computer.
Line output jacks are always connected to the input
preamps signal for source monitoring. The unit may
be powered by an external power source or from USB
port. Optical TOSLINK in/outs and S/PDIF input let
you use this as a digital audio to USB interface as
well. Fully compliant with the USB 1.1 specification
and uses USB adaptive mode for playback and USB
asynchronous mode for record. It will work with
the USB audio device drivers built into Windows
98SE/ME/2000/XP or Macs with native USB support
OS9.1 or greater or OSX. No special drivers required.
Specifications: •Frequency response: 10Hz~50KHz
•THD: .01% dB •A/D & D/A: 16 bit, 44.1KHz or
48KHz USB selectable •Power requirements:
7~12VDC or 9~12VAC, 150mA, or USB bus
•Dimensions: 1.75" (H) x 4.2" (W) x 3.5" (D)
Order #
555-2717
(ea.)
$99.00
NET 30
Terms
78
Order Online
www.mcmelectronics.com
This unit allows a turntable with magnetic cartridge
to be played through conventional line level amplifier
inputs, while providing performance comparable
to that of units at twice the price. Use to connect a
turntable to newer home theater equipment that often
does not include a phono input, to a computer sound
card, mixing console, or other professional equipment.
In addition to providing the required gain, it adds
necessary RIAA equalization to compensate for the
industry standard EQ curve utilized on LPs. The
four-position input selector allows one turntable
and three line level devices to be selected at a single
input. Unit features L/R RCA female type inputs and
outputs, plus a separate ground lug Specifications:
•Frequency response: 20Hz~20KHz •THD: <0.06%
•S/N ratio: 85dB •Input sensitivity: 3.3mV (phono),
300mV (line level) •Phono input impedance:
47Kohm @ 200pF •Crosstalk: 40dB (phono)
•Power requirements: 12VDC, AC adaptor
included •Dimensions: 11⁄2" (H) x 7" (W) x 31⁄4" (D)
Order #
50-7772
(1-3)
$44.95
(4-up)
$39.95
Back
Phono Preamp with Input Selector
This pre–amplifier allows a turntable to be played
through conventional line level inputs such as aux,
tape, tuner or CD. It is also useful for operating a
turntable with a computer sound card, mixing
console, or other professional equipment. In addition
to providing the required gain, it adds necessary RIAA
equalization to compensate for the industry standard
EQ curve utilized on LPs. Front panel phono/aux
input selector allows an additional line level source
to be connected. Unit features L/R RCA female type
inputs and outputs, plus a separate ground lug
•Power requirements: 12VDC, AC adaptor included
•Dimensions: 13⁄8" (H) x 55⁄8" (W) x 3" (D)
Order #
50-7770
(1–3)
$26.49
(4–up)
$24.56
Stereo Phono Preamp
DJPRE-II
Phono
Preamplifier
Since newer
receivers typically
do not include
magnetic phono
connection, this pre–amplifier is
required to connect a turntable to a
conventional line level input. It is also necessary if
playing LPs through a computer sound card, mixing
console, or other professional equipment. In addition
to providing the required gain, this unit also adds
necessary RIAA equalization to compensate for the
industry standard EQ curve utilized on LPs.
Features: •L/R RCA inputs and outputs
•Adjustable ±10dB gain •Selectable 100pF/200pF
input capacitance •Switchable 3dB low cut at 22Hz
•Signal clip indicator •Turntable ground lug •Power
requirements: 7~12VDC or 9~12VAC •AC adaptor
included •Dimensions: 1.75" (H) x 4.2" (W) x 3.5" (D)
Order #
555-2716
•30Hz~20KHz response
•6mV input produces
500mV out •50Kohm
impedance •SN ratio
over 60dB •Uses
standard 117VAC
•For use with amplifers
without a magnetic
phono preamp
Order #
40-630
(1-9)
$16.95
(10-up)
$15.50
(ea.)
$45.00
Direct Drive Turntable
Rugged turntable is
ideal for DJ or home
theater applications
where performance
and durability are a
must. High torque,
quartz–locked,
direct–drive motor
provides highly accurate
speed control, with immeasurable subsonic rumble.
Internal preamplifier provides RIAA EQ compensation
for direct connection to line level inputs on home
theater receivers, mixing consoles and computer
sound cards. Features: •All metal “S” shaped tone
arm •Included Audio-Technica cartridge, stylus and
head–shell •Aluminum platter •Pitch control •Quartz
lock design •Anti skate adjustment •Stylus target
light •Slip mat •Forward/reverse button •33/45/78
speeds •Included output cables •Start/stop button
•High-torque braking •Counterweight and height
adjustment •Strobe indicators •Adjustable feet
•Hinged dust cover
Order #
555-2094
(1–2)
$299.00
(3–up)
$277.07
Complete LP to Digital Recording System
This complete package allows you to easily
transfer vinyl to PC for digital conversion and
storage. Included is the highly popular AT-PL50
belt drive turntable from Audio-Technica,
Cakewalk Pyro™ software, the AT-6012 record
care kit, and connecting cables for both conventional
stereo receiver and computer sound card inputs.
The fully automatic turntable features an internal
preamplifier which provides RIAA equalization and
compatibility with standard line level inputs, and may
be switched off for use with magnetic phono inputs.
Other features include: •Soft damped cuing lever
•Included cartridge and stylus •Metal platter
•Included base and dustcover
Order #
555-2092
555-2093
Description
Turntable only
Complete kit
(1-2)
$99.95
159.00
C52_pg_079
8/7/07
2:42 PM
Page 79
#50-7550
AWD Series
In/Outdoor
Speaker Pair
Order #
50-7550
50-7551
50-7560
50-7561
Color Transformer
Black
No
White
No
Black
Yes
White
Yes
(1–3 prs.)
$148.00
147.50
159.00
159.00
(4 prs. –up)
$127.00
126.50
135.00
135.00
AWD Series
In/Outdoor
Speaker Pair
section
All weather design
makes these the ideal
choice for both indoor and
outdoor sound installations.
Included “U” brackets and wedge
design allow a wide variety of
mounting capabilities. Available
in 8ohm or 25V/70V transformer
#50-7541
configurations, they are perfect
for most residential or commercial sound applications.
Features: •High immunity to outdoor elements
•51⁄4" polypropylene woofer •Rubber surround
•1⁄2" PEI dome tweeter Specifications: •Power
capacity: 40W/80W RMS/peak •Frequency response:
60Hz~20KHz •SPL: 88dB (W/M) •Transformer
taps 3.75W, 7.5W, 15W and 30W (70V/25V models
only) •Non transformer model impedance: 8ohm
•Dimensions: 83⁄4" (H) x 7" (W) x 53⁄8" (D)
•Available in black or white •Sold in pairs
Order #
50-7540
50-7541
50-7545
50-7546
Color Transformer
Black
No
White
No
Black
Yes
White
Yes
(1–3 prs.)
$119.00
119.00
135.00
135.00
(4 prs.–up)
$99.75
99.75
115.00
115.00
Weather
Resistant Foreground/
Background
Speaker Pair
This quality speaker pair
is designed to provide excellent sound quality in
commercial or home music installations. Wedge
shape and included “U” bracket allows easy
mounting on walls, from the ceiling, or in corners.
Sealed reinforced polypropylene housing and high
power capacity make these suitable in demanding
applications, indoors or out. Aluminum grills and
brackets will not rust. 5" mica cone woofer and 1⁄2"
dome tweeter offer 45Hz~22KHz frequency response,
75W/150W nominal/max power capacity and 90dB
sensitivity. Models with built-in 70V/25V line
transformer include an external rotary selector for
5, 10, 15, 20 and 30 watt taps or 8ohm use. Great for
multi-speaker commercial applications. Dimensions:
97⁄8" (H) x 71⁄8" (W) x 53⁄4" (D). Sold in pairs.
Order #
Color
Without Transformer
50-5977
Black
50-5978
White
With Transformer
50-5982
Black
50-5983
White
(1-3 prs.)
(4 prs.-up)
$84.99
84.99
$79.61
79.61
99.99
99.99
93.62
93.62
Compact speakers are ideal for use with a subwoofer
in a compact home theater arrangement, or as
satellites in remote locations including the patio,
deck or near the pool. The fully weatherproof ABS
housing, polypropylene cone woofer and mylar
tweeter enable permanent mounting outdoors.
Mounting brackets and hardware are included.
Specifications: •Power capacity: 30W/50W
RMS/peak each •Frequency response: 55Hz~20KHz
•Impedance: 8ohm •Dimensions: 71⁄4" (H) x 41⁄2" (W) x
43⁄8" (D) •Available in black or white •Sold in pairs
Order #
50-6580
50-6581
Color
Black
White
(1–3 prs.)
$64.95
64.95
This quality speaker pair is ideal for use on
decks, patios, automobiles or in surround sound
applications. Included “U” brackets allow easy
mounting on walls or from the ceiling. Moisture
and weather resistant housing, and polypropylene
components allow use indoors or out. 4" long
excursion woofer, 2" midrange and 3⁄4" tweeter
offer 90Hz~20KHz frequency response, 25W/40W
RMS/peak power capacity and 85dB sensitivity.
Dimensions: 73⁄8" (H) x 45⁄8" (W) x 45⁄8" (D).
4~8ohm compatible. Nominal impedance
6ohm. Sold in pairs.
Order #
50-5995
50-5996
Color
Black
White
(1-3 prs.)
$29.95
29.95
(4 prs.-up)
$27.76
27.76
(4 prs.–up )
$58.50
58.50
Specifically designed for
outdoor applications, this
volume control features a
specially designed gasketed
PVC enclosure, and is ideally
suited for use with landscaping
“rock” speaker and other
outdoor systems. The housing
attaches to standard 3⁄4" PVC
conduit for simplified watertight
installation. Internal jumpers are provided for x1,
x2, x4, x8 and x16 impedance multipliers, allowing
compatibility in standard and impedance matched
installations. Features •Detachable screw terminal
strips accept up to 14AWG speaker cable •12 step
attenuation •May be anchored by PVC conduit alone
or with the four attached wall mount tabs •Gray
PVC enclosure with matching knob Specifications
•Power capacity: 100W RMS •Frequency response:
35Hz~20KHz •Enclosure dimensions: 43⁄4" (H) x
3" (W) x 31⁄4" (D)
Order #
50-7885
(1-3)
$39.95
(4-9)
$34.95
3
Indoor/
Outdoor
Corner
Speaker Pair
Obtain home
theater quality
sound in
commercial
environments, in or out of doors. 8ohm and 70V
line compatibility allow use with residential or
commercial sound systems. The high excursion
woofer, coupled with a high efficiency dome tweeter
provides wide frequency response with tremendous
detail. Rear mounted rotary switch selects multiple
taps on the 70V transformer, or 8ohm bypass
position, allowing the speaker to see the full
frequency range. Features: •Poly cone woofer with
rubber surround •Transformer taps: 10W, 20W, 30W,
40W (50W on #555-2500 only) •Includes mounting
brackets •Wedge shape design for improved cabinet
performance and easy corner mounting •Rustproof
perforated aluminum grills Specifications
#555-2500: •Power capacity: 125W/250W RMS/max
•Frequency response (8ohm mode): 50Hz~20KHz
•SPL: 90dB (W/M) •Dimensions (each): 14.2" (H) x
10.6" (W) x 9.6" (D) #555-2502: •Power capacity:
80W/160W RMS/max •Frequency response
(8ohm mode): 55Hz~20KHz •SPL: 89dB (W/M)
•Dimensions (each): 13.6" (H) x 8.75" (W) x
7.6" (D) •Color: Black •Sold in pairs
Order #
555-2500
555-2502
Indoor/Outdoor
Speaker Pair
Outdoor Volume Control
Weather Resistant Foreground/
Background Speaker Pair
Home Theater
(10-up)
$32.50
Woofer Size
8"
61⁄2"
(1–3 prs.) (4 prs.–up)
$179.00
$163.77
155.00
143.17
Indoor/Outdoor
Speaker with
70V Transformer
Full range speaker
is compatible with
conventional 8ohm
home audio, as well
as commercial 70
volt distributed
systems. Treated
dual cone driver
provides outstanding
sound quality with
high immunity to moisture and humidity. It is perfect
in home or commercial installations, for background
music, paging, and general public address applications
on patios, poolside, outdoor restaurants etc. Included
heavy duty mounting bracket allows easy wall, floor
or ceiling mounting, and unique dispersion lens
provides even 360° sound distribution. Recessed rotary
switch allows easy selection of multiple transformer
taps, 8ohm position fully bypasses transformer,
allowing maximum frequency response in home
systems. Specifications: •Power capacity: 20W
RMS •Frequency response: 80Hz~20KHz (excluding
transformer) •Transformer taps: 2.5W, 5W, 10W, 20W
•SPL: 90dB 1W/1M •Driver: 61⁄2" dual cone
•Magnet size: 10 oz. •Dimensions: 8" (dia.) x 10" (H)
Order #
50-572
(1–3)
$39.95
(4–up)
$38.75
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
79
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
3
All weather design
makes these the ideal
choice for both indoor
and outdoor sound
installations. Larger woofer
size and higher power capacity
also makes these suitable in
foreground music applications.
Included “U” brackets and
wedge design allow a wide
variety of mounting
#50-7551
capabilities. Available in
8ohm or 25V/70V transformer
configurations, they are perfect for most residential
or commercial sound applications. Features: •High
immunity to outdoor elements •61⁄2" mica cone
woofer •Rubber surround •1⁄2" PEI dome tweeter
Specifications: •Power capacity: 50W/100W
RMS/peak •Frequency response: 54Hz~20KHz •SPL:
89dB (W/M) •Transformer taps 3.75W, 7.5W, 15W and
30W (70V/25V models only) •Non transformer model
impedance: 8ohm •Dimensions: 107⁄8" (H) x 83⁄4" (W) x
63⁄4" (D) •Available in black or white •Sold in pairs.
#50-7540
C52_pg_080
8/7/07
2:48 PM
Page 80
Home Theater
section
3
3
Outdoor “Rock”
Speaker System
This attractive
landscaping speaker is
identical to #50-5376,
only light brown color.
•Sold individually
Order #
50-5371
(1-3)
$79.95
(4–up)
$67.66
Outdoor “Rock” Speaker
with 70V Transformer
Outdoor “Rock”
Speaker System
Identical to our
popular #50-5376 rock
speaker, this outdoor
two–way system
includes an internal 70V
transformer for compatibility with multi–speaker
sound installations. Attached six conductor, colorcoded, speaker cable provides individual access to
multiple taps from 2.5W~30W. Each rock speaker
consists of an 8" polypropylene woofer, with rubber
surround, and 1" mylar dome tweeter. These offer
high resistance to the weather while providing full
frequency response. Specifications: •Power capacity:
30W RMS •Frequency response: 50Hz~18KHz
•SPL: 90dB 1W/1M •Transformer taps: 2.5W, 5W,
10W, 20W and 30W •Dimensions: (approximate)
15" (H) x 20" (W) x 12" (D) •Color: Stone gray
•Note: This speaker is compatible with 70V
commercial systems only. For standard 8ohm
applications, use MCM #50-5376.
The perfect
way to easily and
inconspicuously place
high quality sound
outdoors. Rock
speakers are ideal
in gardens, around
decks or by the pool. Designed to blend seamlessly
into any landscape, these natural looking enclosures
are stone gray color, with the appearance and feel of
a real landscape stone. Each rock speaker consists of
an 8" polypropylene woofer, with rubber surround, and
1" mylar dome tweeter. These offer high resistance to
the weather while providing full frequency response.
Specifications: •Power capacity: 50W/100W
RMS/peak •Frequency response: 20Hz~20KHz
•SPL: 90dB 1W/1M •Impedance: 8ohm •Dimensions:
(approximate) 15" (H) x 20" (W) x 12" (D) •Color:
Stone gray •Includes 6' attached speaker cable
•Sold individually
Order #
50-5374
Two-Way Rock Speaker
Attractive compact
garden landscaping
speaker is constructed
from fiberglass
strengthened plastic,
providing high-quality
sound in a natural
looking stone enclosure.
Features: •51⁄4" injection molded polypropylene cone
woofer with butyl rubber surround •3⁄4" liquid cooled
polycarbonate dome tweeter •Multi-layer fiberglass
construction •Weather and UV resistant •Rust
proof aluminum grill •Attached 36" direct bury
cable with waterproof wire nuts Specifications:
•Power capacity: 10~100WRMS •Frequency
response: 70Hz~21KHz •Impedance: 8ohm
•Gray color •Dimensions: 91⁄2" (H) x 10" (W) x
81⁄2" (D) •Mfr. #LSR-5 •Sold individually
Order #
50-8550
(1–3)
$94.95
(4–11)
$89.10
Attractive compact garden
landscaping speaker is
constructed from fiberglass
strengthened plastic, and
features 51⁄4" carbon
cone woofers and 1⁄2"
polyetherimide dome
tweeter. Internal 70V
transformer allows connection to multi speaker
distributed system. 8ohm selector allows use with
conventional amplifiers. Specifications: •Power
capacity: 40W/80W RMS/peak •Frequency response:
90Hz~20KHz •Sensitivity: 88.5 dB (W/M)
•Dimensions: 9.06" (H) x 10.24" (W) x 9.65" (L)
•Sold individually
Order #
555-8700
(1-3)
$74.95
(4-up)
$69.95
Two-Way Rock Speaker
Attractive compact
garden landscaping
speaker is constructed
from fiberglass
strengthened plastic,
providing high quality
sound in a natural
looking stone enclosure.
Features: •61⁄2" mica
filled polypropylene cone woofer with butyl
rubber surround •1" liquid cooled soft dome tweeter
•Multi-layer fiberglass construction •Weather and
UV resistant •Rust proof aluminum grill •Attached
36" direct bury cable with waterproof wire nuts
Specifications: •Power capacity: 10~150W RMS
•Frequency response: 60Hz~21KHz •Impedance:
8ohm •Gray color •Dimensions: 12" (H) x 14" (W) x
11" (D) •Mfr. #LSR-6 •Sold individually
Two-Way Tree
Stump Speaker
The perfect addition to any
garden, indoor attraction or
special landscaping scheme.
Unique two-way speaker is
constructed from fiberglass
strengthened plastic, and features
a 61⁄2" carbon cone woofer and 1⁄2" poly dome tweeter.
Internal 70V transformer allows connection to multi
speaker distributed system. 8ohm selector allows
use with conventional amplifiers. Specifications:
•Power capacity: 50W/100W RMS/peak •Frequency
response: 70Hz~20KHz •Sensitivity: 88.5 dB (W/M)
•Dimensions: 14.57" (H) x 21.65" (W) x 19.69" (L)
•Sold individually
(ea.)
$155.00
Order #
555-8706
(1-3)
$119.00
(4-up)
$109.00
Resonate™ Outdoor Rock Speakers
Attractive, realistic rock finish compliments any landscape
setting. Completely sealed exterior surface provides long term durability and
resistance to the elements. Features: •61⁄2" poly cone woofer with rubber surround
•13mm diameter mylar dome tweeter •Safety loop for securing to the ground
Specifications: •Power capacity: 70W RMS •Frequency response: 80Hz~20KHz
•Sensitivity: 89dB (W/M) •Dimensions: 91⁄2" (H) x 101⁄2" (W) x 91⁄2" (D)
•Sold in pairs
Order #
50-4662
50-4663
Model #
BA-650RK-GT
BA-650RK-SA
Color
Granite
Sandstone
(pr.)
$99.95
99.95
Speaker Brackets
NET 30
Terms
80
(1–3)
$84.95
(4–11)
$79.82
Two-Way Rock Speaker
(ea.)
$125.00
Order #
50-8551
Order #
50-5376
Order Online
www.mcmelectronics.com
Designed specifically for use
with MCM #80-492 and 80-493
speaker systems. Sold in pairs.
Order #
80-502
80-504
Color
Black
White
(1-3 prs.)
$8.50
8.50
(4 prs.-up)
$7.75
7.75
#555-8702
#555-8704
Two-Way Rock Speakers
Choose between two different
styles of this great sounding two-way landscaping
speaker. Internally, these are identical, so they may
be mixed and matched in pairs to enhance the natural
appearance. Speakers are constructed from fiberglass
strengthened plastic, and feature 61⁄2" carbon cone
woofers and 1⁄2" polyetherimide dome tweeters.
Internal 70V transformer allows connection
to multi speaker distributed system. 8ohm
selector allows use with conventional amplifiers.
Specifications: •Power capacity: 50W/100W
RMS/peak •Frequency response: 70Hz~20KHz
•Sensitivity: 88.5 dB (W/M) •Sold individually
Order # Dimensions (H) x (W) x (L)
555-8702
11.81" x 10.63" x 12.20"
555-8704
11.02" x 11.81" x 12.20"
(1-3)
$89.95
89.95
(4-up)
$79.95
79.95
Indoor/Outdoor/Monitor Speaker Pair
Versatile speaker
pair includes
all of the features
required to suit
virtually any
compact speaker
application, at a
tremendous price.
Wide frequency
response makes
them suitable in main,
satellite or monitor
speaker situations, in
the home or studio. Although
outstanding when used alone, these
speakers provide incredible performance when used
with a subwoofer. Polypropylene cone woofer with
rubber surround, and mylar dome tweeter provide
outstanding frequency response, with high immunity
to the elements. Internal 70V transformer allows
compatibility with multi speaker commercial sound
installations. Rear mounted rotary switch allows
easy selection of 70V taps and 8ohm setting.
Optional speaker brackets allow easy mounting
to walls, ceilings and under outside overhangs.
Specifications: •Power capacity: 30W/60W
RMS/peak •Frequency response: 80Hz~20KHz •SPL:
88dB •Impedance: 8ohm •70V transformer taps: 5W,
10W, 20W, 30W, 8ohm •Dimensions: 9" (H) x 6" (W) x
51⁄2" (D) •Sold in pairs
Order #
80-492
80-493
Color
Black
White
(1-3 prs.)
$64.95
64.95
(4-11 prs.)
$60.72
60.72
C52_pg_081
8/7/07
2:30 PM
Page 81
Home Theater
Audio
Basics
Ceiling/
Wall Speaker Mounts
Order #
50-7435
50-7436
50-7437
50-7440
50-7441
50-7442
Model
AB1
AB1
AB1
AB1-HTS
AB1-HTS
AB1-HTS
Set
Single
Single
Single
Five pack
Five pack
Five pack
Color
Black
White
Gray
White
Black
Gray
(ea.)
$13.99
13.99
13.99
54.95
54.95
54.95
section
3
#50-7410
#50-7411
#50-7420
Dual woofers
and dual tweeters,
arranged in a
di-polar configuration,
make this speaker
perfect for surround
channel applications.
Positioned at the rear,
directly at the left and
right of the listening
position, these speakers
provide the outstanding
imaging intended for 5.1,
THX and Dolby Digital
systems. They are also great for compact systems
in conventional two channel stereo environments.
Features: •Dual 51⁄4" woofers •Dual 1⁄2" mylar dome
tweeters with specially designed dispersion lens
•Dual front ports •Attractive simulated black ash
vinyl veneer enclosure with removable black grills
•Wall mount hanger •Color coded push terminals
which accept up to 16AWG wire Specifications:
•Power capacity: 50W/100W RMS/peak •Frequency
response: 80Hz~20KHz •Impedance: 8ohm
•Dimensions: 11" (H) x 11" (W) x 65⁄8" (D)
•Sold individually
#50-7415
#50-7425
#50-7430
Audio Basics Ceiling/Wall
Speaker
Mounts
The perfect value
oriented companion
to home theater and
audio applications
for mounting front,
center, or rear channel
speakers to either wall
or ceiling. The AB2
is for larger satellite
and small bookshelf
speakers, weighing up
to eight lbs. Each is made of durable, weather
resistant fiber reinforced polymer, and includes all
mounting hardware and correct drill bit, for perfect
installation every time. Each model is available in
black or white, and is sold individually. Specially
priced five–packs are available or traditional 5.1
audio systems.
Order #
50-7450
50-7451
50-7455
50-7456
Model
AB2
AB2
AB2-HTS
AB2-HTS
Set
Single
Single
Five pack
Five pack
Color
Black
White
Black
White
(ea.)
$17.99
17.99
74.95
74.95
•All steel brackets
designed for wall
mounting speakers
•Mount speakers
weighing up to 40
pounds •Fully
adjustable to any
position •Must be
stud mounted •Sold in pairs
Order #
50-620
Stainless Steel Series Speaker Mounts
Designed for heavier systems, these mounts are
perfect for everything from surround and satellite
speakers, foreground speakers and studio monitors.
Unique ball and clamp design allows wide range
of movement, with secure positioning of heavy
speakers. Stainless steel hardware ensures strength,
durability and all weather use. Available in wall or
ceiling mount versions, with weight capacity from
5 lbs. to 20 lbs., a model is available to suit any need.
5 lb. versions include hardware for wall or ceiling
mount, all others must be specified. Available in
black, white or gray, mounts are sold individually
and include all mounting hardware and correct
drill bit, for perfect installation every time.
Sold individually.
Weight
Order # Capacity (lbs.)
50-7410
5.0
50-7411
5.0
50-7412
5.0
50-7415
10.0
50-7420
10.0
50-7425
20.0
50-7426
20.0
50-7430
20.0
50-7431
20.0
Speaker Brackets
(1-4 prs.)
$37.95
Type
Wall/Ceiling
Wall/Ceiling
Wall/Ceiling
Wall
Ceiling
Wall
Wall
Ceiling
Ceiling
(5 prs.-up)
$33.73
Color
Black
Gray
White
Black
Black
Black
White
Black
White
Dipolar Rear
Channel Speaker
(ea.)
$18.95
18.95
18.95
22.99
22.99
30.99
30.99
30.99
30.99
Order #
50-6855
(1-3)
$27.95
Dual 61⁄2" Center Channel Speaker
Enhanced center channel speaker features dual
61⁄2" shielded woofers, and a center mounted shielded
dome tweeter, in a ported 1⁄2" MDF cabinet. Its solid
performance, and attractive black ash finish is perfect
for today’s demanding home theater applications.
Specifications: •Power capacity: 45W RMS, 70W
peak •Frequency response: 52Hz~20KHz •Sensitivity:
89dB 1W/1M •Impedance: 4ohm •Dimensions: 73⁄4" (H)
x 20" (W) x 71⁄2" (D) •Sold individually
Order #
50-2240
(1-3)
$59.95
(4-up)
$55.57
Two-Way Monitor Speaker System
Universal Speaker
Mounting Kit
For speakers having footing at the
back of the enclosure, the WA is
the best mounting solution for
the widest coverage. •30 lb. weight
capacity •Weatherproof •One
mount per kit •Perfect for
mounting MCM Custom Audio
model #555-1864 monitor speaker
Order #
555-1862
(ea.)
$79.95
This versatile two-way speaker is perfect for use as mains in small venues, stage
or studio monitors, or in distributed audio environments where sound quality is a
must. Housed in a heavy-duty ported ABS enclosure, the speaker system features
a soft dome tweeter, and high excursion 8" woofer, and is capable of delivering
30Hz~20KHz frequency response. Internal 70V transformer allows compatibility
with distributed commercial systems, and 8ohm bypass position provides full
frequency response with conventional amplifiers. Specifications: •Power capacity:
75W/150W RMS/peak •Nominal impedance: 8ohm •SPL 92dB (W/M) •Transformer
taps: 5W, 10W, 15W, 20W and 30W •Dimensions: 153⁄4" (H) x 10" (W) x 9" (D) •Black
color •Sold individually
Order #
555-1864
(1-3)
$119.00
(4-up)
$105.00
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
81
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
3
The perfect value
oriented companion
to home theater and
audio applications for
mounting front, center,
or rear channel speakers
to either wall or ceiling. The AB1 Series mounts are
for mini and satellite speakers, weighing up to 2.5
lbs. Special tilt–and–swivel–positioning feature allow
the speaker to be leveled after installation. Each is
made of durable, weather resistant fiber–reinforced
polymer, and includes all mounting hardware and
correct drill bit, for perfect installation every time.
Available in black, white or gray, units are sold
individually. Specially priced five–packs
are available for traditional 5.1 audio systems.
C52_pg_082
8/7/07
2:35 PM
Page 82
Home Theater
section
3
3
Active 10"
Subwoofer
This front–firing
subwoofer is
perfect for any
home theater
or music
application,
and has specific
features added
to make it very
easy to integrate
into a distributed
audio system.
Features:
•10" polypropylene cone woofer •L/R line level inputs
•Single LFE input which bypasses the subwoofers
frequency adjustment, relying on the processor in the
receiver •Line level and LFE feed–through outputs
•Speaker level inputs, with high pass satellite
speaker outputs •0°/180° phase selector •Single
sensing for auto–power–on •3~30VAC/DC trigger
input to allow on command from external equipment
•0°/180° phase selector Specifications: •Output
power: 90W/125W RMS/peak •Frequency response:
30~160Hz •Crossover range: 60Hz~120Hz
•Dimensions: 15.25" (H) x 14.25" (W) x 17.25" (D)
Order #
50-8480
Mfr. #
LSS-10
(ea.)
$299.00
Center Channel
Speaker System
Attractive
center channel
speaker features
simulated black
ash vinyl veneer,
and a partially
transparent, removable black grill. Intended to be a
perfect match to model #50-9085 bookshelf speakers,
this speaker will blend beautifully with any existing
system. Features: •Dual poly cone 4" woofers,
with single piece concave cone, and rubber surrounds
•1⁄2" mylar dome tweeter •Rear ported enclosure
Specifications: •Power capacity: 80W/120W
RMS/peak •Frequency response: 50Hz~20KHz
•Sensitivity: 88dB (W/M) •Impedance: 8ohm
•Dimensions: 6" (H) x 15.75" (W) x 6.5" (D)
•Sold individually
Order #
50-9080
(1-3)
$24.95
(4-up)
$22.95
Attractive
speaker pair
features
simulated
black ash
vinyl veneer,
and a partially
transparent,
removable
black grill.
Intended to be a perfect match to model #50-9080
center channel speaker, they are perfectly suitable
as front or rear speakers in any home theater
environment. Features: •Poly cone 4" woofer,
with single piece concave cone, and rubber surround
•1⁄2" mylar dome tweeter •Rear ported enclosure
Specifications: •Power capacity: 60W/120W
RMS/peak •Frequency response: 60Hz~20KHz
•Sensitivity: 87dB (W/M) •Impedance: 8ohm
•Dimensions: 9.5" (H) x 6" (W) x 6.5" (D)
•Sold in pairs
(1-3 prs.)
$29.95
(4 prs.-up)
$27.55
Order #
50-8490
Mfr. #
LSS-12
(ea.)
$399.00
NET 30
Terms
82
Order Online
www.mcmelectronics.com
Order #
50-9070
(1-3)
$79.95
(4-up)
$73.55
Bookshelf Speaker Pair
Beautifully crafted speaker pair features a high
gloss piano black finish that is sure to compliment
any décor. Intended to be a perfect match to model
#50-9070 center channel speaker, they are perfectly
suitable as front or rear speakers in any home
theater environment. Features: •51⁄4" poly cone
woofer, with rubber surround and steel phase
plug •1" soft dome tweeter •Rear ported enclosure
Specifications: •Power capacity: 75W/225W
RMS/peak •Frequency response: 49Hz~20KHz
•Sensitivity: 88dB (W/M) •Impedance: 8ohm
•Dimensions: 9.9" (H) x 6.3" (W) x 7.9" (D)
•Sold in pairs
Order #
50-9075
(1-3 prs.)
$99.95
(4 prs.-up)
$91.95
Active 10" Subwoofer
Active 10"
Subwoofer
Active 12" Subwoofer
Beautifully crafted speaker system features a high
gloss piano black finish that is sure to compliment
any décor. Intended to be a perfect match to
Model #50-9075 bookshelf speakers, this speaker
will blend beautifully with any existing system.
Features: •Dual poly cone 51⁄4" woofers, with butyl
rubber surrounds •1" soft dome tweeter •Rear
ported enclosure Specifications: •Power
capacity: 125W/275W RMS/peak •Frequency
response: 70Hz~20KHz •Sensitivity: 87dB (W/M)
•Impedance: 8ohm •Dimensions: 6.3" (H) x
16.5" (W) x 7.9" (D) •Sold individually
Bookshelf
Speaker Pair
Order #
50-9085
This front–firing subwoofer is perfect for any
home theater or music application, and has specific
features added to make it very easy to integrate
into a distributed audio system. Features: •12"
polypropylene cone woofer •L/R line level inputs
•Single LFE input which bypasses the subwoofers
frequency adjustment, relying on the processor in the
receiver •Line level and LFE feed–through outputs
•Speaker level inputs, with high pass satellite
speaker outputs •0°/180° phase selector •Single
sensing for auto–power–on •3~30VAC/DC trigger
input to allow on command from external equipment
•0°/180° phase selector Specifications: •Output
power: 190W/260W RMS/peak •Frequency response:
27~160Hz •Crossover range: 60Hz~120Hz
•Dimensions: 19" (H) x 14.25" (W) x 19" (D)
Center Channel Speaker System
This down–firing
ultra slim
subwoofer enables
placement in out–of–the way
locations that are impossible for
conventional cube shaped boxes. And if it is to be in
plain view, the high gloss black lacquer finish will
certainly compliment any décor. Features: •Rear
mounted 150W amplifier •Single piece aluminum 10"
woofer •Flared ported cabinet •Removable speaker
spikes •Line level inputs •Speaker level inputs, with
high pass satellite speaker outputs •0°/180° phase
selector •Auto power sensing •Crossover bypass
selector Specifications: •Output power: 150W
RMS/peak •Frequency response: 30~180Hz
•Crossover range: 50Hz~180Hz •Power
requirements: 115/230VAC, 50Hz/60Hz •Dimensions
(excluding 1" spikes): 7" (H) x 14.75" (W) x 19.5" (D)
•Mfr. #AST-SUB10
Order#
50-8695
(ea.)
$179.00
This down-firing active
subwoofer features a
highly efficient 100W
amplifier, long throw
10" low frequency driver
and flared front port, for
excellent low frequency
response. Its subdued
simulated black ash
finish will complement any décor.
This unit is an ideal addition with any home
theater speaker system that utilizes 6~8" woofers.
Features: •Ported 3⁄4" MDF cabinet •0°/180° phase
selector •Line level inputs, with feedthrough outputs
•Speaker level inputs, with high pass satellite
speaker outputs •Lighted rocker power switch
•Included speaker spikes Specifications: •Output
power: 100W/150W RMS/peak •Frequency response:
30~180Hz •Variable crossover range: 20~180Hz
•Power requirements: 110VAC, 60Hz •Dimensions
(excluding spikes): 14" (H) x 13.75" (W) x 14.5" (D).
Order #
50-7660
(ea.)
$99.95
Shielded Satellite Speaker Pairs
Designed specifically for home theater use, these small speaker systems pack
enough punch for any satellite, surround, background music or multimedia
application. Fully shielded drivers allow use in close proximity to TV and
computer monitors. Solid molded enclosures, poly treated cone woofers with
foam surrounds, and 1" mylar dome tweeter combine to provide outstanding
performance, for a reasonable price. Suitable as stand alone or in
combination with a subwoofer. Connections are made via recessed, color
coded, push terminals. Steel mesh grill, black color, 8ohm. Sold in pairs.
Order #
50-6255
Woofer Size
4"
Power Capacity
RMS/peak
30W/60W
Frequency
Response
65Hz~22KHz
SPL
89dB
Dimensions
(W) x (H) x (D)
5" x 77⁄8" x 51⁄8"
(1-3 prs.)
$39.95
(4-11 prs.)
$37.34
C52_pg_083
8/7/07
2:45 PM
Page 83
Home Theater
Amp Five Series Monoblock Amplifiers
Order #
50-6400
50-6402
Model #
AMP5.1
AMP5.3
RMS Output @4ohm
100W
250W
Width
2.75"
5.5"
(ea.)
$137.00
224.00
Amp Five Series Accessories
Order #
50-6410
50-6411
50-6412
50-6413
Description
Rack mount chassis, 16.5" internal width
2.75" blank faceplate
4.125" blank faceplate
5.5" blank faceplate
#50-7570
(ea.)
$59.95
12.50
12.50
12.50
#50-7575
AMP Series Stereo Power Amplifiers
These new AMP200/300 from AudioSource were designed from the ground–up, with the distributed audio
installer in mind. Additionally, their solid performance makes them ideal components in high–end audio
systems. Features: •Front panel controls for level, balance and A/B speaker selection •Two sets of input pairs,
each accept line or speaker level signal •Auto–switching between inputs, with adjustable delay •Line level pass
through output on input #2 •Rear mounted master level controls (allows gain limiting) •Manual or auto–sensing
power control •12V trigger input allows power–on command from external components •12V trigger output allows
amplifier to trigger external components •Stereo and bridged mono operation •Heavy–duty binding post speaker
outputs •2ohm stability •Discrete output components •THD of less than 0.05% (at 8ohm)
Order
50-7570
50-7575
Model
AMP200
AMP300
Output (4ohm)
125W RMS x 2CH
235W RMS x 2CH
Output (8ohm)Bridged
200W RMS
375W RMS
Dimensions
31⁄2" (H) x 161⁄2" (W) x 14" (D)
51⁄4" (H) x 161⁄2" (W) x 14" (D)
(ea.)
$399.95
470.00
section
3
C
3
Multichannel power amplifiers have
become the foundation upon which
the best home sound systems are built.
With the proliferation of multizone sound
reinforcement and state of the art digital
surround sound, the amplification of several
channels has evolved from a luxury into a
necessity. The AudioSource Amp Five Series
are fully featured, high current monoblock
power amplifiers. High quality, fan cooled
discreet output devices stay cool under the
most demanding situations. Large toroidal
power supplies and oversized capacitors
work together to ensure an abundance of
headroom while staying stable into loads
as low as two ohms. The Amp Five Series
is completely modular within its optional
#50-6400
rack mountable chassis. This chassis
#50-6402
accommodates six 100W, four 150W or three
250W modules. Many other combinations may
be utilized. For example, a typical Dolby Digital
home theater system, three 100W and two
150W modules may be utilized within the
chassis. Optional blank face plates are
available for a clean front panel. Other
features: •2ohm stability •Front panel status
LEDs •Gain control •Heavy–duty, gold–plated
#50-6410
five–way binding posts •Switchable 100Hz,
12dB “low cut” filter •0/180° phase switch
•Balanced XLR input •Unbalanced RCA line input •Loop–through line out Specifications: •THD <0.1%
•Frequency response: 20Hz~20KHz •S/N ratio: 95dB •Input sensitivity: 1.0V •XLR input impedance: 20Kohm
•Line input impedance: 10Kohm •Damping factor: 200 •Dimensions: 5.5" (H) x see chart (W) x 11.75" (D)
A
All-In-One Music
Distribution System
B
The MDS-6A all-in-one
music distribution system
can accept up to six different music sources. It offers
480W of system power, 40W per channel, with up
to 12 channels available. It features a page/doorbell
input jack as well as a music-on-hold output jack
for interconnection of an optional communications
controller. Volume level adjustments are provided to
customize the level of each of these features. Music
control is provided via either the MCS-1A or MCS-2A
keypads. Each provides you with flexible control over
the MDS-6A and connected music sources and gives
the user feedback on the status of the system. The
keypads are back-lit and are supplied with white
and almond bezels. The MCS-1A is a single gang
Decora™ style controller with volume, mute, and
source selection buttons. An IR target is provided
that allows complete control of the connected music
source. Learning remotes can be configured to
duplicate the MCS-1A’s volume, source and mute
control. For complete system control, use the MCS-2A
double gang control. A full learning keypad with
onboard universal code library, the MCS-2A will learn
IR codes from each of the six sources including track
selection, play, start, stop and other key functions.
In addition, the keypad can learn up to 25 macros
with ten steps each. Macro codes are permanently
stored and can be cloned between additional
MCS-2A controllers. Features: •Six source/six zone
configuration •12 channel x 40W per channel power
amplifier •Zone on/off status indicators •Quick and
easy programming •User feedback to all back-lighted
system keypads •Easy to install and maintain
•Six source-specific, routed IR output ports
Fig. Order#
A MCS-1A
B MCS-2A
C MDS-6A
Description
Single gang keypad controller
Dual gang keypad controller
6 X 6 audio distribution amplifer
(1-4)
$100.00
180.00
1330.00
Back
Five Disc Carousel
CD Changer
AMP100 Stereo Power Amplifier
Perfect for high fidelity situations needing an
independent audio amplifier. Use as part of a
multi–amp configuration in home theater systems, a
zone amplifier in distributed sound applications, or as
a monitor amp in the studio. This solid no–nonsense
amplifier provides 50W RMS per channel, at 8ohm,
with less than 0.04% THD, and may be bridged for
100W RMS mono. Additional features include A/B
speaker outputs, with front panel control, individual
L/R level controls, and heavy duty five–way
binding post outputs. Dimensions: 2.75" (H) x
16.5" (W) x 8" (D).
Order #
50-6062
(ea.)
$136.59
AMP One Stereo Power Amplifier
The AMP One provides outstanding performance
and value. With delivery of 80W RMS per channel,
200W RMS bridged mono, the AMP One provides
plenty of power for most home theater applications
with detail and accuracy. Specifications:
•Output power THD < 0.4% •Frequency response
20Hz~20KHz •S/N ratio 110dB •Input sensitivity
0.8V •Input impedance 30Kohm •Dimensions:
161⁄2" (W) x 23⁄8" (H) x 115⁄8" (D)
Order #
50-6060
(ea.)
$199.95
Front loading multi–disc player features a one–bit
twin D/A convertor, random sequential play, and
bright fluorescent display with music calendar.
Other features include: •Coaxial digital output
•8x oversampling •Three beam laser pick-up
•Headphone output with volume control
•Compatibility with Sherwood Digi–Link
remote control system
Order #
50-6321
Mfr. #
CDC-5090R
(ea.)
$185.00
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
83
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C52_pg_084
8/7/07
2:49 PM
Page 84
Home Theater
section
3
3
Dolby® Digital
7.1 Receiver
EQ 200 Stereo Graphic Equalizer
Provides equalization of the entire spectrum, with
ten bands per channel, one octave apart. Left and
right input level controls allow perfect matching.
Multi colored spectrum display shows relative level
of each band. Each of the 20 slide controls allows
easy visual identification of settings. Rear panel has
connections for audio and video inputs and outputs,
two sets of tape inputs and outputs. Front panel
controls include EQ bypass switch, EQ record
and tape monitor selection.
Order #
50-6090
(ea.)
$125.00
Stereo Receiver
This Dolby Digital receiver provides 100W per
channel for each of seven channels. Features:
•HDMI switching •Universal Video™ up-conversion
to component video •XM “Connect and Play”
compatibility •Automatic speaker set-up and room
EQ •Dolby Digital EX, Pro Logic IIx •DTS-ES, 96/24,
Neo-6 Dolby virtual speaker •Dolby headphone
•Totally discrete amplifier stage for all channels
•Four DSP surround modes (theater, hall, church,
matrix) •192KHz/24 bit digital to analog devices for
all channels •7.1 channel direct input •Automatic
speaker set-up with supplied microphone •Room EQ
•Three A/V inputs •Two A/V outputs •Universal
Video™ •Two component video inputs •Component
video output •HDMI inputs •One HDMI output
•Three analog inputs (including tuner) •Analog
output •Three composite video inputs and two
composite video outputs •Four digital inputs (two
coaxial and two optical) •Optical digital output
•Advanced multi-brand remote control •Multi-stage
dynamic range control •Cinema EQ •Tone
direct speaker •30 AM/FM tuner presets
•30 XM tuner presets •Mfr. #RD-7502
Order #
50-7802
(ea.)
$299.00
This elegantly simple pre-amp offers audiophile
performance, without the extravagant price.
Perfectly matched in appearance and performance
to the AudioSource AMP Two and AMP Three,
this control unit is compatible with any amplifier
accepting line level inputs. This unit provides
selection of inputs labeled DVD, CD, LD, Tuner,
Tape and Aux. (magnetic phono requires optional
pre-amp, such as MCM #40-630). Additionally,
there are two sets of line outputs and one tape
loop. Rotary controls independently adjust volume,
balance, bass and treble.
Order #
50-6065
Order #
50-7806
(ea.)
$109.00
Progressive Scan DVD
Player with HDMI Output
Plays virtually all of the current optical formats
available including DVD, CD, CD-R, CD-RW, MP3
encoded CD and VCD. Features: •Coaxial and
optical digital outputs for DTS or Dolby digital
decoding •HDMI, component, S-video, composite video
and USB outputs •27MHz, 10 bit video and 96MHz,
24 bit audio D/A convertors for all channels •Full
featured remote control •Three speed forward/reverse
slow playback •Six-speed forward/reverse picture
search •Supports anamorphic, letter-box and 4 x 3
playback •Mfr. #VD-4602
Order #
50-7808
Stereo Receiver
Stereo Pre-Amplifier
Straight-forward AM/FM receiver features
outstanding tuner sensitivity, multiple component
inputs, and a solid, discrete output, 100W RMS x two
channel stereo amplifier. Features: •AM/FM stereo
tuning with 30 station presets •Large fluorescent
display •Included IR remote control •Four line level
inputs (plus tuner) •Digital encoder volume control
•Headphone jack •Sleep timer •Mfr. #RD-4109
Mfr. #
VD-4602
(ea.)
$135.00
Straight-forward AM/FM receiver features
outstanding tuner sensitivity, multiple component
inputs, and a solid, discrete output, 100W RMS x two
channel stereo amplifier. Features: •AM/FM stereo
tuning with 30 station presets •Large fluorescent
display •Included IR remote control •Four line level
inputs (plus tuner) •Digital encoder volume control
•Headphone jack •Sleep timer •Mfr. #RD-4103
Order #
50-7804
(ea.)
$109.00
(ea.)
$175.00
HDMI Link™ Switcher
AM/FM Digital Tuner
The ideal mate for the PR330A Stereo Amplifier, this
quartz locked tuner is compatible with any amplifier
with line level inputs. The IR remote control
included with the PR330A will operate this tuner.
Features include: •Bright fluorescent digital
display •20 station memory •Auto station scanning
•Signal lock indicator RCA pre-amp out •Included
AM and FM antennas •Dimensions: 16" (W) x 4" (H)
x 9" (D) •Black color •Mfr. #PR33T
Order #
50-6045
(ea.)
$74.95
(2-up)
$66.90
NET 30
Terms
84
Order Online
www.mcmelectronics.com
This table top switcher provides two HDMI inputs and a single HDMI output, as well as
converting component video to HDMI. This revolutionary product converts component video to HDMI, and adds
digital audio to the HDMI data stream. It switches two HDMI sources, routes digital audio to Toslink SPDIF
output for processing by A/V receiver or preamplifier and is controllable via RS-232 or IR. Features: •Two HDMI
inputs •Component video input •Toslink optical audio
Order #
(ea.)
input •HDMI output •Toslink optical audio output
•RS-232 serial control input •Infrared remote
50-7813
$229.00
control •HDCP compliant •Mfr. #HSB-6501
Home/Studio
Stereo Equalizer
Rack mount EQ provides individual left/right control of 15 frequency bands from 25Hz to 16KHz. Three position
selector allows slide controls to operate across (6dB, 9dB or 12dB boost/cut range. Five segment (per channel)
bargraph display shows relative input to output signal level. Provides control of the following frequencies:
25Hz, 40Hz, 63Hz, 100Hz, 150Hz, 250Hz, 630Hz, 1KHz, 1.5KHz, 2.5KHz, 4KHz, 6.3KHz, 10KHz and 16KHz.
Features include: •Individual left/right bypass switch •Rack mount chassis with handles •RCA input and
output connections •Switchable 110/220V operation Specifications: •Frequency response •5Hz~20KHz
•S/N ratio 90dB •THD <0.02% •Dimensions
Order #
(ea.)
(2-up)
19" (W) x 13⁄4" (H) x 95⁄8" (D) •Mfr. #PEQ-60
555-4045
$84.95
$78.80
C52_pg_085
8/7/07
2:34 PM
Page 85
Home Theater
section
3
Dolby Digital EX,
DTS-ES A/V Receiver
Order #
50-7785
Model #
RD-8601
Order #
50-7805
Mfr. #
RX-4105
(ea.)
$125.00
Front
(ea.)
$339.00
3
Decodes all of Hollywood’s latest movie formats
including DTS-ES and Dolby Digital EX. Fully
adjustable Dolby Pro Logic IIx decodes or enhances
two channel sources. Dolby Headphone® provides
amazing private surround listening. With six 100W,
high current, discrete amplifiers on board, sound
quality is superb. In stereo mode, this receiver
delivers 100W per channel x 2, with less than 0.9%
THD, from 40Hz~20KHz, driving a 6ohm load, 100W
per channel x 6 in surround mode. Universal Video™
feature converts all video signals to a single
component video output, greatly simplifying
connection of multiple video formats. Decode
features: •DTS ES Discrete and Matrix •DTS Neo
(cinema and music) •Dolby Digital Surround EX
•Dolby Pro Logic II •Dolby Virtual Surround
Input/output capabilities: •Two coaxial inputs
•Two optical digital inputs •Optical digital output
•Subwoofer preamp out •Three A/V inputs (two with
S-video) •Four audio inputs •7 channel direct input
•Front panel A/V input Control capabilities:
•Semi-graphical on-screen display •Three DSP modes
•Tone direct •Cinema EQ •Source/feature memory
•Dynamic range control (multi-step) Tuner
features: •Quartz PLL tuning •Preset scan
•30 station presets •See www.mcmelectronics.com
for complete information
Stereo Receiver
Straight-forward AM/FM receiver features
outstanding tuner sensitivity, multiple component
inputs, and a solid, discrete output, 100W RMS x two
channel stereo amplifier. Additionally, the included
remote control operates the relay switching for the
A/B speaker outputs. Features: •AM/FM stereo
tuning with 30 station presets •Large fluorescent
display •Included 25 key IR remote control •Four
line level inputs (plus tuner) •Digital encoder
volume control •Headphone jack •Sleep timer
Specifications: •THD: <0.08%, 20Hz~20KHz @
8ohm •S/N ratio: >90dB •IHF FM tuner
sensitivity: 17.2dBf •FM frequency response:
40Hz~12KHz •AM tuner sensitivity: 800µV/M •AM
frequency response: 100Hz~2.3KHz • Dimensions:
47⁄8" (H) x 173⁄8" (W) x 14" (D)
Stereo Amplifier with IR Remote
Ideal for adding a zone to a sound system, or
amplifying a CD player, DVD player, or other line
level device when an entire home theater system is
not necessary. It may also be used in conjunction
with matching Pyramid Home Audio components,
to form a complete system. The included IR
remote selects amplifier input, adjusts volume level,
and provides function control for select Pyramid
accessories. Features: •Six selectable line level
inputs •EQ in/out loop •Tape record out •Four
internal preset EQ settings •Rotary encoder volume
control •Front panel 1⁄4" microphone input with level
control •Headphone output •Heavy duty binding
post speaker outputs IR compatible components:
•PR333E 14 band EQ •PR332T AM/FM tuner
•PR331D dual cassette deck Specifications:
•Power output: 30W RMS x 2 channels @ 6ohm,
100W x 2 channels peak •THD: <0.05% at half
rated power •Frequency response: 20Hz~20KHz
•S/N ratio: 70dB •Power requirements: 110VAC,
60Hz/220VAC, 50Hx selectable •Dimensions:
51⁄4" (H) x 161⁄2" (W) x 81⁄2" (D)
Order #
50-6050
Distributed Audio
Stereo Receiver
Dolby Digital/DTS
Receiver
Built on the same chassis as its upscale sibling the
RD-8601 (#50-7785), the RD-6500 is the perfect
foundation for a budget priced 5.1 system. This unit
includes built-in decoders for DTS, Dolby Digital
and Dolby Pro Logic II. Features: •100W per
channel x 2 in stereo mode with less than 0.9%
THD, 40Hz~20KHz @ 6ohm •100W x 5 in surround
mode •Two coaxial and one optical digital input
•Subwoofer preamp output •Three A/V inputs
•Four audio inputs •6 channel direct input
•Front panel A/V input •Dynamic range control
•30 station presets •See www.mcmelectronics.com
for complete information
Order #
50-7800
Model #
RD-6500
(ea.)
$169.00
(ea.)
$199.00
Order #
50-6650
(1-3)
$89.00
(2–up)
$105.00
Professional Home/Studio Stereo Preamplifier
May be used on a tabletop or mounted in a rack,
making it suitable for professional or high end home
use. Front panel includes an input for microphone,
with level control. Rotary controls adjust volume,
loudness, bass, treble and midrange. Other features
include hi/low filter, stereo/mono mode selector. Push
buttons select from up to five inputs labeled Tape,
Tuner, CD, Aux and Phono. All inputs accept
standard line level, except phono input which accepts
low level for magnetic cartridge. Specifications:
•Input sensitivity: •Mic: 0.5mV/600ohm •Phono:
3mV/47Kohm •Others 150mV/47Kohm •Output
level: •Tape out: 150mV/100Kohm •Pre out:
500mV/4Kohm •THD: <0.4% •Frequency response:
5Hz~30KHz •Connections: Mic input: 1⁄4", all others
RCA type female •Power requirement: 120/220VAC
50~60Hz •Dimensions 19" (W) x 23⁄8" (H) x 81⁄2" (D)
•Mfr. #PR-2500
Order #
555-4051
Dual Cassette Deck
Dual cassette deck is the perfect
addition to any home theater
system requiring tape capability.
Included mounting hardware
also allows the unit to be easily
installed in a standard 19"
equipment rack. Features:
•Dynamic noise reduction
•Normal and high speed dubbing
•CrO2 and normal tape selector •Three digit tape
counter •LED level meters • Capability for use
with IR remote when used with the matching PT600A
integrated amplifier •110/220V switchable power input
•Dimensions (excluding rack ears): 5.5" (H) x 16.5" (W) x
9" (D) •Mfr. #PT649D
(ea.)
$109.00
Back
This receiver is perfect for music listening in any
room of the home, with conventional left/right
stereo output. What sets this apart is four amplifier
output channels, creating a self contained, four-zone
distributed audio receiver. Up to four pairs of
bookshelf, in-wall, in-ceiling or outdoor speakers
may be driven directly from this unit, with
independent selection of any or all pairs. It
is perfect in small residential or commercial
background music applications. Features: •AM/FM
tuner with 30 station presets •Five audio inputs
(including tuner) •Phono input •IR remote control
•Volume, bass and treble controls •Headphone jack
•Power output: 70W RMS x 4 (8ohm), 100W RMS x 4
(4ohm) •THD: <0.2%, 20Hz~20KHz into 8ohm
•Dimensions: 5" (H) x 173⁄8" (W) x 13" (D)
•Mfr. #RX-5502
Order #
50-4640
Model #
PR330A
(ea.)
$74.95
(2-up)
$69.53
(4-up)
$87.55
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
85
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960