AGILENT/HP 6642A Datasheet - Test Equipment Solutions UK

Test Equipment Solutions Datasheet
Test Equipment Solutions Ltd specialise in the second user sale, rental and distribution of
quality test & measurement (T&M) equipment. We stock all major equipment types such as
spectrum analyzers, signal generators, oscilloscopes, power meters, logic analysers etc from
all the major suppliers such as Agilent, Tektronix, Anritsu and Rohde & Schwarz.
We are focused at the professional end of the marketplace, primarily working with customers
for whom high performance, quality and service are key, whilst realising the cost savings that
second user equipment offers. As such, we fully test & refurbish equipment in our in-house,
traceable Lab. Items are supplied with manuals, accessories and typically a full no-quibble 2
year warranty. Our staff have extensive backgrounds in T&M, totalling over 150 years of
combined experience, which enables us to deliver industry-leading service and support. We
endeavour to be customer focused in every way right down to the detail, such as offering free
delivery on sales, covering the cost of warranty returns BOTH ways (plus supplying a loan
unit, if available) and supplying a free business tool with every order.
As well as the headline benefit of cost saving, second user offers shorter lead times, higher
reliability and multivendor solutions. Rental, of course, is ideal for shorter term needs and
offers fast delivery, flexibility, try-before-you-buy, zero capital expenditure, lower risk and off
balance sheet accounting. Both second user and rental improve the key business measure of
Return On Capital Employed.
We are based near Heathrow Airport in the UK from where we supply test equipment
worldwide. Our facility incorporates Sales, Support, Admin, Logistics and our own in-house
Lab.
All products supplied by Test Equipment Solutions include:
- No-quibble parts & labour warranty (we provide transport for UK mainland addresses).
- Free loan equipment during warranty repair, if available.
- Full electrical, mechanical and safety refurbishment in our in-house Lab.
- Certificate of Conformance (calibration available on request).
- Manuals and accessories required for normal operation.
- Free insured delivery to your UK mainland address (sales).
- Support from our team of seasoned Test & Measurement engineers.
- ISO9001 quality assurance.
Test equipment Solutions Ltd
Unit 8 Elder Way
Waterside Drive
Langley
Berkshire
SL3 6EP
T: +44 (0)1753 596000
F: +44 (0)1753 596001
Email: info@TestEquipmentHQ.com
Web: www.TestEquipmentHQ.com
6640A Series Single-Output,
200 W DC Power Supplies, GPIB
Data Sheet
Speed and accuracy for test optimization
•
•
•
•
•
•
Fast, low-noise outputs
Analog control of output voltage and current
Fan-speed control to minimize acoustic noise
Parallel and series connections of multiple units
Built-in measurements and advanced programmable features
Protection features to ensure DUT safety
This series of 200 W linear-regulated
DC power supplies is designed to maximize the throughput of DUTs through
the manufacturing test process with
fast up and down programming time.
Valuable assemblies can be destroyed
by a minor component failure that can
allow a surge of voltage or current
to flow to the DUT. Fast protection
features, including fast crowbar, mode
crossover protection, and the ability
to connect the protection circuitry of
multiple power supplies can increase
production yield.
Programming of the DC output and the
protection features can be done either
from the front panel or using industry
standard SCPI commands, via the GPIB.
Using the serial link, up to 16 power
supplies can be connected through one
GPIB address. Test system integration
can be further simplified be using the
VXIplug&play drivers. The output voltage and current can also be controlled
with analog signals. This is helpful for
certain types of noisy environments,
and also immediate reactions to
process changes.
Lab bench use is enhanced by the fan
speed control, which helps to minimize
acoustic noise.
Specifications
Specifications
(at 0 ° to 55 °C unless otherwise specified)
6641A
6642A
6643A
6644A
6645A
Number of outputs
1
1
1
1
1
GPIB
Yes
Yes
Yes
Yes
Yes
Output voltage
0 to 8 V
0 to 20 V
0 to 35 V
0 to 60 V
0 to 120 V
Output current (40°C)
0 to 20 A
0 to 10 A
0 to 6 A
0 to 3.5 A
0 to 1.5 A
Maximum current (50 °C/55 °C)
18 A/17 A
9 A/8.5 A
5.4 A/5.1 A
3.2 A/3 A
1.4 A/1.3 A
Output ratings
Programming accuracy (at 25 °C ± 5 °C)
Voltage
0.06% +
5 mV
10 mV
15 mV
26 mV
51 mV
Current
0.15% +
26 mA
13 mA
6.7 mA
4.1 mA
1.7 mA
Ripple and noise from 20 Hz to 20 MHz
Voltage
rms
peak-to-peak
Current
rms
300 μV
300 μV
400 μV
500 μV
700 μV
3 mV
3 mV
4 mV
5 mV
7 mV
10 mA
5 mA
3 mA
1.5 mA
1 mA
Readback accuracy at 25 °C ± 5 °C
(percent of reading plus fixed)
Voltage
0.07% +
6 mV
15 mV
25 mV
40 mV
80 mV
+Current
0.15% +
18 mA
9.1 mA
5 mA
3 mA
1.3 mA
–Current
0.35% +
40 mA
20 mA
12 mA
6.8 mA
2.9 mA
Load regulation
Voltage
1 mV
2 mV
3 mV
4 mV
5 mV
Current
1 mA
0.5 mA
0.25 mA
0.25 mA
0.25 mA
Voltage
0.5 mV
0.5 mV
1 mV
1 mV
2 mV
Current
1 mA
0.5 mA
0.25 mA
0.25 mA
0.25 mA
Line regulation
Transient response time
Less than 100 μs for the output voltage to recover to its previous level (within 0.1% of the voltage rating of the supply or 20 mV,
whichever is greater) following any step change in load current of up to 50% of the output current rating of the supply
Supplemental characteristics
(Non-warranted characteristics determined
by design and useful in applying the product)
6641A
6642A
6643A
6644A
6645A
Average programming resolution
Voltage
5 mV
10 mV
15 mV
30 mV
Current
6 mA
3 mA
2 mA
1.2 mA
0.5 mA
OVP
13 mV
30 mV
54 mV
93 mV
190 mV
160 mV
400 mV
700 mV
1.2 V
2.4 V
OVP accuracy
2
2 mV
Specifications, continued
Specifications
(at 0 ° to 55 °C unless otherwise specified)
6641A-J04
6643A-J11
6644A-J09
6645A-J05
6645A-J06
Special order
option
Special order
option
Special order
option
Special order
option
Special order
option
Number of outputs
1
1
1
1
1
GPIB
Yes
Yes
Yes
Yes
Yes
Output voltage
13 V
40 V
70 V
150 V
170 V
Output current (40 °C)
15.3 A
5A
3A
1.2 A
1A
Maximum current (50 °C/55 °C)
13.77 A/13 A
4.5 A/4.25 A
2.7 A/2.55 A
1.08 A/1.02 A
0.9 A/0.85 A
Output ratings
Programming accuracy (at 25 °C ± 5 °C)
Voltage
0.06% +
8.5 mV
17.5 mV
31 mV
65 mV
74 mV
Current
0.15% +
21 mA
6.7 mA
4.1 mA
1.7 mA
1.7 mA
Ripple and noise from 20 Hz to 20 MHz
Voltage
300 μV
450 μV
600 μV
900 μV
1 mV
peak-to-peak
rms
3 mV
3.5 mV
6 mV
9 mV
10 mV
rms
8 mA
53 mA
1.5 mA
1 mA
1 mA
Current
Readback accuracy at 25 °C ± 5 °C
(percent of reading plus fixed)
Voltage
0.07% +
10 mV
30 mV
47 mV
100 mV
140 mV
+Current
0.15% +
15 mA
5 mA
3 mA
1.3 mA
1.3 mA
–Current
0.35% +
40 mA
12 mA
6.8 mA
2.9 mA
2.9 mA
Load regulation
Voltage
1 mV
3 mV
4.5 mV
7 mV
8 mV
Current
1 mA
0.25 mA
0.25 mA
0.25 mA
0.25 mA
Voltage
0.5 mV
1 mV
1.5 mV
2.5 mV
3 mV
Current
1 mA
0.25 mA
0.25 mA
0.25 mA
0.25 mA
Line regulation
Transient response time
Less than 100 μs for the output voltage to recover to its previous level (within 0.1% of the voltage rating of the supply or 20 mV,
whichever is greater) following any step change in load current of up to 50% of the output current rating of the supply
Supplemental characteristics
(Non-warranted characteristics determined
by design and useful in applying the product)
6641A-J04
6643A-J11
6644A-J09
6645A-J05
6645A-J06
Special order
option
Special order
option
Special order
option
Special order
option
Special order
option
Average programming resolution
Voltage
3.5 mV
12 mV
1.4 mV
37.5 mV
42.5 mV
Current
5 mA
2 mA
1.2 mA
0.5 mA
0.5 mA
OVP
OVP accuracy
23 mV
62 mV
110 mV
250 mV
285 mV
260 mV
800 mV
1.5 mV
3V
3.4 V
3
Supplemental characteristics
for all model numbers
DC floating voltage: Output terminals
can be floated up to ± 240 VDC from
chassis ground
Remote sensing: Up to half the rated
output voltage can be dropped in each
load lead. The drop in the load leads
subtracts from the voltage available for
the load.
Command processing time: Average
time required for the output voltage to
begin to change following receipt of
digital data is 20 ms for the power
supplies connected directly to the GPIB
Output programming response time:
The rise and fall time (10/90% and
90/10%) of the output voltage is less
than 15 ms. The output voltage change
settles within 1 LSB (0.025% x rated
voltage) of final value in less than 60 ms.
Down programming: An active down
programmer sinks approximately 20%
of the rated output current
Modulation: (Analog programming of
output voltage and current)
Input Signal: 0 to –5 V
Input Impedance: 10 kΩ nominal
AC input:
(AC input frequency 47 to 63 Hz)
Voltage 100 VAC 120 VAC 220 VAC 240 VAC
Current 4.4 A
3.8 A
2.2 A
2.0 A
InpInput power: 480 VA, 400 W at full
load; 60 W at no load
GPIB interface capabilities:
SH1, AH1, T6, L4, SR1, RL1, PP0, DC1,
DT1, E1, and C0. IEEE-488.2 and SCPIcompatible command set
Software driver:
• IVI-COM
• VXIplug&play
Regulatory compliance: Conforms to
UL 1244 and IEC61010-1.
Size:
425.5 mm W x 88.1 mm H x 439 mm D
(16.75 in x 3.5 in x 17.3 in)
Weight: Net, 14.2 kg (31.4 lb);
shipping, 16.3 kg (36 lb)
Warranty: One year
Agilent models: 6641A, 6642A, 6643A, 6644A, 6645A
Top
421.7 mm
16.6"
± 240 VDC Max to
+
–
425.5 mm
16.75"
6 - 32 x 3/8 Screws
{
A Thomas & Betts 22-18 ring
crimp-on will fit in this area
}
Terminal screw size: m4 x 0.7 x 8 mm
434.3 mm
17.1"
12.7 mm
0.5"
88.1 mm
3.5"
Rear
Side
Output
4
100 mm
3.93"
www.agilent.com
www.agilent.com/find/6640
Ordering information
Opt 100
Opt 120
Opt 220
Opt 240
87 to 106 VAC, 47 to 63 Hz
104 to 127 VAC, 47 to 63 Hz
191 to 233 VAC, 47 to 63 Hz
209 to 250 VAC, 47 to 63 Hz
Opt 0L1 Full documentation on
CD-ROM and printed user’s and programming guides. CD-ROM includes
user’s guide, programming guide,
service manual, and quick start guide
Accessories
1CM002A* Rack mount flange kit
88.1 mm H (2U), 1.75 inch hole spacing, two flange brackets
1CP001A* Rack mount flange and
handle kit 88.1 mm H (2U) – two
brackets and front handles
E3663AC Support rails for Agilent
rack cabinets
p/n 1494-0060 Accessory slide kit
p/n 1252-3698 7-pin analog plug
p/n 1252-1488 4-pin digital plug
p/n 5080-2148 Serial link cable
2 m (6.6 ft)
Application notes
10 Practical Tips You Need to Know
About Your Power Products,
5965-8239E
10 Hints for Using Your Power Supply
to Decrease Test Time, 5968-6359E
Understanding Linear Power Supply
Operation (AN1554), 5989-2291EN
For more information on Agilent
Technologies’ products, applications or
services, please contact your local Agilent
office. The complete list is available at:
www.agilent.com/find/contactus
Agilent Advantage Services is committed
to your success throughout your equipment’s lifetime. To keep you competitive,
we continually invest in tools and
processes that speed up calibration and
repair and reduce your cost of ownership.
You can also use Infoline Web Services
to manage equipment and services more
effectively. By sharing our measurement
and service expertise, we help you create
the products that change our world.
www.agilent.com/find/advantageservices
Agilent Electronic Measurement Group
DEKRA Certified
ISO 9001:2008
Quality Management Sys
System
www.agilent.com/quality
Agilent Email Updates
www.agilent.com/find/emailupdates
Get the latest information on the
products and applications you select.
Agilent Channel Partners
www.agilent.com/find/channelpartners
Get the best of both worlds: Agilent’s
measurement expertise and product
breadth, combined with channel
partner convenience.
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
(11) 4197 3600
01800 5064 800
(800) 829 4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP Countries
1 800 629 485
800 810 0189
800 938 693
1 800 112 929
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 375 8100
Europe & Middle East
Belgium
32 (0) 2 404 93 40
Denmark
45 45 80 12 15
Finland
358 (0) 10 855 2100
France
0825 010 700*
*0.125 €/minute
Germany
Ireland
Israel
Italy
Netherlands
Spain
Sweden
United Kingdom
49 (0) 7031 464 6333
1890 924 204
972-3-9288-504/544
39 02 92 60 8484
31 (0) 20 547 2111
34 (91) 631 3300
0200-88 22 55
44 (0) 118 927 6201
For other unlisted countries:
www.agilent.com/find/contactus
Revised: January 6, 2012
Modern Connectivity–Using USB
and LAN I/O Converters (AN 1475-1)
5989-0123EN
Product specifications and descriptions
in this document subject to change
without notice.
* Support rails required
© Agilent Technologies, Inc. 2012
Published in USA, February 14, 2012
5990-9304EN