Rice Lake 250-10 Series Specifications

Rice Lake Digital Handrail Scale
250-10 Series
Software Revision 11439
Operation Manual
151641- Rev B
Contents
1.0
Introduction.................................................................................................................................. 1
2.0
Safety ........................................................................................................................................... 2
2.1 Safety Signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3.0
Scale Assembly ........................................................................................................................... 3
3.1 Unpacking Your Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.2 Repacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.3 Setting Up Your Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4.0
Scale Operation ........................................................................................................................... 5
4.1
4.2
4.3
4.4
4.5
5.0
Weighing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hold/Release Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preset Tare. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Toggle Tare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Body Mass Index (BMI) Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
6
6
7
7
RS-232 Communication ............................................................................................................... 8
5.1 Pushbutton Keypad Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.2 USB Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.0
7.0
Troubleshooting and Testing ..................................................................................................... 11
Maintenance .............................................................................................................................. 12
7.1 Basic Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7.2 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8.0
Rice Lake Digital Handrail Scale Specifications ...................................................................... 13
For More Information ............................................................................................................................. 14
Rice Lake Digital Handrail Scale Limited Warranty.............................................................................. 15
Technical training seminars are available through Rice Lake Weighing Systems.
Course descriptions and dates can be viewed at www.ricelake.com or obtained
by calling 715-234-9171 and asking for the training department
© 2014 Rice Lake Weighing Systems. All rights reserved. Specifications subject to change without notice.
Rice Lake Weighing Systems is an ISO 9001 registered company. Software Revision 11439
September 2014 Rev. B
Rice Lake continually offers web-based video training on a growing selection
of product-related topics at no cost. Visit www.ricelake.com/webinars.
ii
Digital Handrail Scale Operation Manual
1.0
introduction
The Rice Lake Digital Handrail Scale is designed for weighing bariatrics and ensures sound, accurate weighing
information. A non-skid platform paired with side rails assists persons who need extra support and safety. The
scale is set up to use motion sensing weighing technology, to determine the actual weight of a moving patient.
The weight is displayed on the indicator and can be displayed in pounds or kilograms.
This manual can be viewed and downloaded from the Rice Lake Weighing Systems web site at
www.ricelakehealth.com. Technical information on this product and other medical products are also
available on the Rice Lake Weighing Systems web site.
Figure 1-1. Rice Lake Digital Handrail Scale (250-10-2)
Digital Handrail Scale Operation Manual
1
2.0
Safety
There are certain precautions that should be taken to prevent personal injury to the user and damage to your
scale.
2.1
Safety Signals
Safety Signal Definitions:
Indicates a potentially hazardous situation that, if not avoided, could result in death or
Warning serious injury.
Caution
Indicates a potentially hazardous situation that, if not avoided, may result in minor or
moderate injury.
Indicates information about procedures that, if not observed, could result in damage to
Important equipment.
2.2
Safety Precautions
Do not operate or work on this equipment unless you have read and understand
instructions in the manual. Failure to follow the instructions or heed the warnings could
result in injury or death. Contact any Rice Lake Weighing Systems dealer for replacement
manuals. Proper care is your responsibility.
Before attempting to operate this unit, make sure every individual who operates or works
Warning with this unit has read and understands the following safety information. Please follow
these instructions carefully.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
Do not drop the scale or subject it to violent shocks.
For accurate weighing, the scale must be placed on a flat, stable surface.
Do not transport the scale while someone is standing on it.
Weight exceeding the maximum capacity (1000 lb/453 kg) may damage your scale.
Operating at voltages and frequencies other than specified could damage the equipment.
If the LO Bat indicator activates, for accurate weighing, replace the batteries or connect the scale to an AC
power source as soon as possible.
To avoid cross contamination, the scale should be cleaned regularly.
Avoid contact with excessive moisture.
Do not allow minors (children) or inexperienced persons to operate this scale.
Do not jump up and down on the scale.
Do not use in the presence of flammable materials.
Do not make alterations or modifications to the scale.
People with disabilities, or who are physically frail, should always be assisted by another person when
using this scale.
Do not use the scale on slippery surfaces, such as a wet floor.
Do not use this scale when your body/feet are wet, such as after taking a bath.
Digital Handrail Scale Operation Manual
3.0
Scale Assembly
3.1
Unpacking Your Scale
Place the unopened box in an open area that has ample room for unpacking the scale.
Parts contained in the shipping box include:
• The scale
• This manual
• 6 mm Allen key
3.2
Repacking
If the Digital Handrail Scale must be returned for modification, calibration or repair, it must be properly packed
with sufficient packing materials. Whenever possible, use the original carton when shipping the scale back.
Important
3.3
Damage caused by improper packaging is not covered by the warranty.
Setting Up Your Scale
Move the scale into the area where the weighing process will occur. Place the scale on a hard, level surface for
the most accurate weighments.
1. Locate the operator’s manual from inside the box and set aside as it will provide instructions on the
proper set up.
2. Using two people, remove the scale out of the packaging material that it came in by lifting the scale out
of the box by the scale base.
Caution
DO NOT lift the scale out of the box by its handle as this can cause the hinges to break.
3. Gently set the scale platform down to the floor.
4. Loosen the handles using the Allen key and unfold handles and set upright.
Lift handles up
Figure 3-1. Set Up Sides to a Vertical Position
5.
6.
7.
8.
Adjust the feet to ensure that the base of the scale base is not touching the floor.
Screw in all four legs.
Attach the wrap around rails.
Tighten the hex screw head using the enclosed 6 mm Allen key to stabilize the scale.
Digital Handrail Scale Operation Manual - Scale Assembly
3
Inserting Batteries
The six AA batteries that come with the scale offer an average of 25 hours of continuous use.
To install the batteries,
1. Open the battery chamber cover by loosening the thumbscrew.
2. Insert batteries into the battery chamber as shown in Figure 3-2.
Figure 3-2. Battery Chamber
3. Close the battery chamber.
If an external power supply or USB power supply is connected, the battery flag on the display is turned off.
When using battery or USB power supply, the backlight power is deducted to 60%.
AC Power Connections
Use the optional 120 VAC or 230 VAC adapter when power is available. The optional AC power adapter plugs
into the back of the indicator as shown in Figure 3-3.
Connect the
optional AC
power source
here
Figure 3-3. Power Connection
4
Digital Handrail Scale Operation Manual
4.0
Scale Operation
The Rice Lake Digital Handrail Scale display has various front panel keys as shown in Figure 4-1.
Figure 4-1. Front Panel Display Keys
Key Descriptions
Table 4-1 describes each of the key functions.
Key
Name
Function
On/Off
Switches the scale on or off.
Print
LB/KG
Print — A long key press will send data out from the RS-232 port.
LB/KG — A short key press allows the user to toggle between kilograms
and pounds providing that it’s enabled in configuration mode.
There is no toggling while in the BMI mode.
Zero
Clears the weight off the scale and returns it to zero after three seconds.
It works only if the current weight is stable and zero up to 2% of full weight.
Hold
Release
Hold & Release — The first press holds the most current weight value shown
on the display.
A second press releases the weight value shown.
This key is not active while in BMI mode.
BMI
Enables the user to access the BMI (Body Mass Index) function. This key
only works if there is a locked weight shown on the display and the BMI
function is turned on in the configuration mode.
TARE
Used to subtract the weight off the scale, example: oxygen tank, other
equipment.
CLEAR
Allows the user to return to normal weighing when the BMI value is being
displayed.
While in BMI mode, the height display causes the value to return to the
default of 190.0 cm, 5 ft, 7.5 in.
On/Off
Print
LB/KG
Zero
Hold
Release
BMI
TARE
T
CLEAR
Table 4-1. Rice Lake Digital Handrail Scale Key Functions
Digital Handrail Scale Operation Manual - Scale Operation
5
Key
Name
Function
ENTER
Used to accept height in BMI mode.
Accepts the value of the parameter last entered and moves to the next stage.
A long press of the ENTER key during the scale’s start up process will enter
the ID display (pre-parameter mode).
Up/Down Arrows
Used to adjust height input (0.5 in/0.5 cm) while in BMI mode.
Adjusts the value of the flashing digit/number.
ENTER
Table 4-1. Rice Lake Digital Handrail Scale Key Functions
Caution
The keys on the front panel display are very sensitive so only a gentle pushing motion is required to
obtain results.
The scales have the capability of performing different operations beyond just calculating weight. The various
operating instructions are described below.
4.1
Weighing
Use the following steps to weigh a person.
1. Press the On/Off key to turn on the scale and 0.0 will appear on the display along with ZERO on the upper
display.
2. When the person step on the scale the display shows the person’s weight. The LOCK annunciator is on in
the upper display and beeps to indicate the end of the weighing process.
3. To change the display from kg to lb and vice-versa, press the LB/KG key.
4. To turn off the scale, press and hold the On/Off key until OFF appears on the display.
4.2
Hold/Release Function
Use the following steps to use the Hold/Release function.
1. When the person is on the scale, press the Hold/Release key.
2. When the person steps off the scale, the weight and the HOLD & LOCK annunciator will remain on the
display.
3. At this stage the Zero key will not work. The only way to return to zero from here is to press the Hold/
Release key one more time.
Note Pressing the Hold key prior to a person getting on the scale will also work.
4.3
Preset Tare
Use the following steps to use the Preset Tare.
1. When the weight is set to 0.0, place the extra load on the scale. Press the TARE key until the display
returns to 0.0 and NET appears on the display.
2. Remove the extra load from the scale. The weight will appear with a negative symbol to the left of it.
3. Ask the patient to step on the scale with the extra weight. The display shows the patient’s weight. The
NET annunciator is still on. The weight of the extra load remains stored in memory.
4. To cancel the tare weight, press and hold the TARE key until NET disappears from the display and the
display turns back to 0.0 and GROSS appears. Tare weight is also canceled when the scale is turned off.
6
Digital Handrail Scale Operation Manual
4.4
Toggle Tare
Use the following steps to use the Toggle Tare function.
1. When the weight is set to 0.0, press the TARE key.
2. The default tare value is displayed (default is programmed to be 33.0 lb/15.0 kg), while the zero is
flashing.
3. Use the Up/Down arrow keys to adjust the value.
4. Press ENTER to start the tare function and the NET annunciator will be turned on instead of the GROSS
annunciator.
4.5
Using the Body Mass Index (BMI) Function
Use the following steps in determining the BMI.
LB Mode
1.
2.
3.
4.
Ensure that the scale is at zero.
Have the person step on the scale to obtain a weight.
The LOCK annunciator is illustrated on the display.
Press the BMI key. The BMI and FT/IN annunciators are lit on the display and a default value of 5 feet
and 7.5 inches (5-07.5) is flashing.
5. Use the Up/Down arrow keys to adjust the height value, and press the ENTER key to move to the next step.
6. The BMI value and BMI annunciator is shown on the display. Press CLEAR to return to the weighing
mode and the BMI function will be turned off.
KG Mode
1.
2.
3.
4.
Ensure that the scale is at zero.
Have the person step on the scale to obtain a weight.
The LOCK annunciator is illustrated on the display.
Press the BMI key. The BMI and CM annunciators are lit on the display and a default value of 170.0 cm
(170.0) is flashing.
5. Use the Up/Down arrow keys to adjust the height value, and press the ENTER key to move to the next step.
6. The BMI value and BMI annunciator is shown on the display. Press the CLEAR key to return to the
weighing mode or step off the scale and the BMI function will be turned off.
Digital Handrail Scale Operation Manual - Scale Operation
7
5.0
RS-232 Communication
The scale comes with an RS-232 port which enables weight data to be transmitted to other equipment, such as a
computer or printer. The RS-232 cable with DB-9 connector (PN 100719) is available from Rice Lake Weighing
System. Figure 5-1 shows where the RS-232 connection is.
The RS-232 parameters are 9600 baud (selectable in the programming mode), 8 data bits, 1 stop bit, no parity
and no handshaking.
There are three methods of communication:
• Pushbutton keypad print
• Standard remote protocol
• Escape protocol
5.1
Pushbutton Keypad Print
With a stable, in-range weight, press and hold the Kg-Lb/Print key for at least three seconds, or until the scale
emits two quick beeps. Note that if the scale does not beep after five seconds, then release the button as the
weight was either in motion, or out of range.
• If displaying weight and not BMI, the scale will send out the following 21 character string:
xxxxxxxxx<SP>uu<SP>mmmmm<SP><CR><L
F>
Where:
xxxxxxxxx is the weight with decimal point and " - " sign, if negative uu is the unit (lb or kg).
mmmmm is the mode (gross or net)
Examples:
-10 Lb net = <SP><SP><SP><SP>-10.0<SP>lb<SP><SP>Net<SP><SP><SP><CR><LF>
10 Lb gross = <SP><SP><SP><SP><SP>-10.0<SP>lb<SP>Gross<SP><CR><LF>
•
In BMI mode (displaying the BMI value), the scale will send out the following data:
GROSS WEIGHT
TARE WEIGHT
NET WEIGHT
PATIENT HEIGHT
PATIENT BMI
5.2
215.0 LB
0.0 LB
215.0 LB
6-01.0 FT
28.4
USB Connection
The Rice Lake Digital Handrail Scale has the capability of connecting to a PC using a USB connection and a
USB cable (not included). That connection location is shown in Figure 5-1.
USB Connection
RS-232 Connection
Figure 5-1. USB Connection Port and RS-232 Connection Port
8
Digital Handrail Scale Operation Manual
Connecting software and downloads should be addressed by your IT department and can vary depending on what
type of computer platform you’re using. Basic information on USB driver installation using Windows ® is
described in the following steps and serves only as an example. The USB driver can be downloaded from the
Rice Lake Weighing Systems website at the following location; http://www.ricelake.com/software.aspx
Select Medical/Health Scales, Software and Get Downloads. Opening any product will show a USB Driver
download. Click on Download to open and download the driver to your computer.
1. The graphic below shows the window that pops up when the USB cable is connected to the indicator and
the scale is turned on.
Follow the screen prompts to navigate through the screens below.
4. The following screen appears while the driver
2. Select No, not this time and then select Next.
is installing on to your system.
3. Select Install the software automatically, then
select Next.
5. The following screen appears when installation is
complete. Click on Finish.
Digital Handrail Scale Operation Manual - RS-232 Communication
9
6. If you want to verify the installation, you can view the driver by looking at the device manager of your
system.
7. To print a ticket using the USB driver, open the software driver (shown above) and the port assigned to
that driver is shown.
8. Ensure that the USB cable is properly connected and unit is on.
9. Another terminal type program (such as Hyperterminal) needs to be opened and connected through the
USB driver to the indicator to be able to see the information being sent to the PC. A port needs to be
established so select the port that is assigned to Parpar and print the ticket. The following example tickets
will print.
Note
10
A single print ticket has four spaces after the “patient weight” and only one space between weight
and lb in the examples shown above. Then seven <CR><LF> after.
Digital Handrail Scale Operation Manual
6.0
Troubleshooting and Testing
Refer to the following to check and correct any failure before contacting service personnel.
Symptom
Possible Cause
Scale does not turn on
Questionable weight or the scale does not
zero
Corrective Action
Dead battery
Connect the scale to a power source.
Faulty electrical outlet
Use a different electrical outlet.
Bad power supply
Replace adapter.
External object is interfering with the
scale.
Remove the interfering object from the scale.
Display did not show 0.0 before weighing.
Help the patient off the scale, zero the scale and begin
the weighing process again.
Scale is not placed on a level floor.
Ensure the scale is level and begin the weighing
process again.
Scale is out of calibration.
Check the weight with a known weight value.
The display shows E messages as detailed below.
E06
Identifier — ADC
E07
AD too high
AD too low
E10
Overload
Scale has been overloaded. Remove load from scale.
E4L
BAT
Battery low but still useable — One bar left on the
indicator display.
Battery low and unstable — no bars left on the
indicator display.
E4U
E11
CAL
Calibration Error — recalibrate the scale again.
Err 2
Low saturation state (low A/D)
The load cell is not connected properly. Check the
cables and mechanical connections. If the problem
persists, replace the set of load cells.
Err 3
High saturation state (high A/D)
See Err 2
Err 6
Unstable weight. Cannot calibrate.
Check the load cells’ mechanical surroundings and see
that nothing touches them and that the cables are
properly welded.
SAT
Damaged load cell cable
Replace load cell cable.
Table 6-1. Troubleshooting Table for the Rice Lake Scale Line
Digital Handrail Scale Operation Manual - Troubleshooting and Testing
11
7.0
Maintenance
The following section provides instructions for maintaining and cleaning the Rice Lake line of scales.
Maintenance operations other than those described in this section should be performed by qualified service
personnel.
7.1
Basic Maintenance
Before the first use of the scale and after periods of non-use, check the scale for proper operation and function. If
the scale does not operate correctly, contact qualified service personnel.
Go through the following steps for basic maintenance.
1. Check the overall appearance of the entire scale for any obvious signs of damage.
2. Inspect the condition of the AC adapter for cord cracking or fraying or for broken or bent prongs.
7.2
Cleaning
Proper care and cleaning is essential to ensure a long life of accurate and effective operation. Before beginning
the cleaning process, disconnect the scale from the AC power source.
1. Clean all external surfaces with a clean, damp cloth or tissue. Mild soap and water solution may be used.
Dry with a clean soft cloth.
2. Do not immerse the scale into cleaning or other liquid solutions.
3. Do not use isopropyl alcohol or other solutions to clean the display surface.
12
Digital Handrail Scale Operation Manual
8.0
Rice Lake Digital Handrail Scale Specifications
Power
120 VAC-9VDC-50Hz / 230 VAC-9VDC-50Hz
Battery Type
6 AA size Alkaline batteries
Battery Use
25 hours continuous use
Automatic power-off can be configured
Data Communications
RS-232 with RJ-45 jack
USB connection
Selectable baud rate, default - 9600
8 bits
No parity
1 stop bit
No handshaking
Environmental
Operating Temperature
50 to +104°F (14 to 40°C)
Storage Temperature
32 to 158°F (0 to 70°C)
Humidity
85% relative humidity
Capacity and Graduation
1000 lb (453 kg)
0.2 lb (0.1kg)
Certifications and Approvals
RoHS Compliant
Dimensions
Platform Dimensions
25 in W x 20 in L x 3 in H
Digital Handrail Scale Operation Manual - Rice Lake Digital Handrail Scale Specifications
13
For More Information
Literature
•
•
Medical Scales - Handrail Scale 4 Color, PN106426
Handrail Scale Technical Manual, PN152436
Web Site
•
http://www.ricelakehealth.com
Contact Information
Hours of Operation
Knowledgeable customer service representatives are available 6:30 a.m. - 6:30 p.m. Monday through Friday and
8 a.m. to 12 noon on Saturday. (CST)
Telephone
Fax
•
•
•
Sales/Technical Support 800-472-6703
Canadian and Mexican Customers 800-321-6703
International 715-234-9171
•
Fax Number 715-234-6967
Email
•
•
U.S. sales and product information at prodinfo@ricelake.com
International (non-U.S.) sales and product information at intlsales@ricelake.com
Mailing Address
Rice Lake Weighing Systems
230 West Coleman Street
Rice Lake, WI 54868 USA
14
Digital Handrail Scale Operation Manual
Rice Lake Digital Handrail Scale Limited Warranty
Rice Lake Weighing Systems (RLWS) warrants that all RLWS equipment and systems properly installed by a
Distributor or Original Equipment Manufacturer (OEM) will operate per written specifications as confirmed by
the Distributor/OEM and accepted by RLWS. All systems and components are warranted against defects in
materials and workmanship for two years.
RLWS warrants that the equipment sold hereunder will conform to the current written specifications authorized
by RLWS. RLWS warrants the equipment against faulty workmanship and defective materials. If any equipment
fails to conform to these warranties, RLWS will, at its option, repair or replace such goods returned within the
warranty period subject to the following conditions:
• Upon discovery by Buyer of such nonconformity, RLWS will be given prompt written notice with a
detailed explanation of the alleged deficiencies.
• Individual electronic components returned to RLWS for warranty purposes must be packaged to
prevent electrostatic discharge (ESD) damage in shipment. Packaging requirements are listed in a
publication, Protecting Your Components From Static Damage in Shipment, available from RLWS
Equipment Return Department.
• Examination of such equipment by RLWS confirms that the nonconformity actually exists, and was
not caused by accident, misuse, neglect, alteration, improper installation, improper repair or
improper testing; RLWS shall be the sole judge of all alleged non-conformities.
• Such equipment has not been modified, altered, or changed by any person other than RLWS or its
duly authorized repair agents.
• RLWS will have a reasonable time to repair or replace the defective equipment. Buyer is responsible
for shipping charges both ways.
• In no event will RLWS be responsible for travel time or on-location repairs, including assembly or
disassembly of equipment, nor will RLWS be liable for the cost of any repairs made by others.
THESE WARRANTIES EXCLUDE ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE . N EITHER
RLWS NOR DISTRIBUTOR WILL, IN ANY EVENT, BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
RLWS AND BUYER AGREE THAT RLWS’S SOLE AND EXCLUSIVE LIABILITY HEREUNDER IS LIMITED TO
REPAIR OR REPLACEMENT OF SUCH GOODS. IN ACCEPTING THIS WARRANTY, THE BUYER WAIVES ANY AND
ALL OTHER CLAIMS TO WARRANTY.
SHOULD THE SELLER BE OTHER THAN RLWS, THE BUYER AGREES TO LOOK ONLY TO THE SELLER FOR
WARRANTY CLAIMS.
NO TERMS, CONDITIONS, UNDERSTANDING, OR AGREEMENTS PURPORTING TO MODIFY THE TERMS OF THIS
WARRANTY SHALL HAVE ANY LEGAL EFFECT UNLESS MADE IN WRITING AND SIGNED BY A CORPORATE
OFFICER OF RLWS AND THE BUYER.
© 2014 Rice Lake Weighing Systems, Inc. Rice Lake, WI USA. All Rights Reserved.
RICE LAKE WEIGHING SYSTEMS • 230 WEST COLEMAN STREET • RICE LAKE, WISCONSIN 54868 • USA
Digital Handrail Scale Operation Manual - Rice Lake Digital Handrail Scale Specifications
15
16
Digital Handrail Scale Operation Manual
230 W. Coleman St. Rice Lake, WI 54868 USA
U.S. 800-472-6703 Canada/Mexico 800-321-6703 International 715-234-9171
Europe +31 (0) 88 2349171
www.ricelake.com www.ricelake.mx www.ricelake.eu www.ricelake.co.in m.ricelake.com
© Rice Lake Weighing Systems
09/2014
PN 151641, Rev B