Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting Deluxe Owner`s manual

TRU 8860
SERIES
OWNER'S
MANUAL
TRU8860_1st.book 1 ページ
2004年1月6日 火曜日 午後6時40分
WELCOME/FEATURES
TERMINOLOGY
CONTROLS & FUNCTIONS
DISPLAY AND ICONS
SOFT KEY FUNCTION
GETTING STARTED
Setting up the Phone
Mounting the Base Unit on a Wall
Expanding Your Phone
Connecting the Charger
Register the Handset
Main Menu Options
Setting Menu Options
BASICS
Making and Receiving Calls
Call Waiting
Placing a Call on Hold
Redialing a Call
Adjusting the Ringer, and Earpiece and Speaker Volume
Temporarily Muting the Ringer
Mute Microphone
Tone Dialing Switch-over
Travelling Out of Range
Privacy Mode
Using One Touch Voice Mail Access
PHONEBOOK
Phonebook (Storing Phone Numbers, Names,
Distinctive Rings and Speed Dial)
Chain Dialing
Steps for Entering Names and Special Characters
Viewing the Phonebook
Making Calls Using the Phonebook
Speed Dialing
Editing or Erasing a Stored Name, Phone Number,
Distinctive Ring and Speed Dial
Copying Phonebook Locations
www.uniden.com
Contents
2
3
4
6
8
9
9
12
14
14
15
16
17
29
29
31
31
32
33
33
34
34
35
35
36
37
CALLER ID
Caller ID and CIDCW (Caller ID on Call Waiting)
Viewing the Caller ID List
Deleting a Caller ID Message
Using the Caller ID Message List
Call Waiting Deluxe Features
MULTI-HANDSET FEATURES
Multi-Handset Features
Using the DirectLink Mode
3-Way Conferencing
Intercom/Call Transfer Feature
ADDITIONAL INFORMATION
Changing the Digital Security Code
Find Handset
Installing the Beltclip
Headset Installation
Note on Power Sources
General Information
TROUBLESHOOTING
Troubleshooting
Liquid Damage
PRECAUTIONS & WARRANTY
I.C. NOTICE
MEMORY LIST
INDEX
45
45
46
47
48
50
51
51
51
52
52
54
54
54
54
55
55
57
58
58
60
61
63
64
67
37
38
39
41
42
42
43
44
[1]
TRU8860_1st.book 2 ページ
Welcome
2004年1月6日 火曜日 午後6時40分
Congratulations on your purchase of this Uniden Digital Expandable Cordless Telephone
System! This unit is different from conventional cordless telephones. When the base
unit is connected to AC power and a telephone line, it can support up to 10 handsets.
You can now place a fully-featured cordless handset anywhere in your home or office
where AC power is available to connect the handset chargers. Extra handsets also allow
you to establish a 3-way conference call among 2 handsets and an outside line.
Note: Some illustrations in this manual may differ from the actual unit for explanation
purposes.
As an Energy Star Partner, Uniden has determined that this product or product
models meets the Energy Star guidelines for energy efficiency.
Energy Star is a U.S. registered mark.
Features
5.8GHz Digital Expandable
10 Multi-Handset Expandability
Hands-Free Duplex Speakerphone in the Handset
Caller ID/Call Waiting Deluxe (subscribe through local telephone company)
100 programmable Memory Locations
Trilingual Display Options (English, French and Spanish)
Intercom/Call Transfer Between Handsets
20 Distinctive Ring Options (10 ringer tones and 10 melody ringers)
Mute and Hold Features
DirectLink Mode
Room/Baby Monitoring
Battery Level Indicator
Clock Display
Animation Displays
[2] WELCOME/FEATURES/TERMINOLOGY
www.uniden.com
WELCOME/
FEATURES/
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TRU8860_1st.book 3 ページ
2004年1月6日 火曜日 午後6時40分
This series features AutoTalk  and AutoStandby . AutoTalk allows you to answer a call by just removing
the handset from the cradle so you don't have to waste time pushing buttons. AutoStandby allows you to
hang up by simply returning the handset to the cradle.
To protect you against mis-billed calls that might result from your phone being activated by other
equipment, this series has Random Code  digital security, which automatically selects one of more than
10,000,000 digital security codes for the handset and base.
Digital Spread Spectrum Technology uses a wider frequency band than standard digital transmissions. The
result is a more secure conversation with the clarity of digital sound, extended range, and minimal
interference from other cordless phones.
IntegriSound Built in sound quality which provides life-like conversations.
With DirectLink  mode, you can use 2 or more handsets as radio transceivers (walkie-talkies).
Be sure to visit our web site: www.uniden.com
Uniden is a registered trademark of Uniden America Corporation.
AutoTalk, AutoStandby, DirectLink, IntegriSound, and Random Code are trademarks of Uniden America.
Terminology
www.uniden.com
WELCOME/FEATURES/TERMINOLOGY [3]
WELCOME/
FEATURES/
•Standby Mode - The handset is not in use, and talk/flash or speaker has not been pressed. No dial tone is
present.
•Talk Mode The handset is not in the cradle, and talk/flash or speaker has been pressed, enabling a dial tone.
Tal k appears on the display.
TRU8860_1st.book 4 ページ
2004年1月6日 火曜日 午後6時40分
Controls & Functions
1
5
6
13
2
7
3
8
9
14
15
16
4
10
11
12
17
18
19
20
1. Handset Antenna
2. Beltclip Hole
3. Speakerphone Speaker and Ringer
4. Handset Battery Compartment
5. New Message LED
6. Handset Earpiece
7. LCD Display
8. soft Keys (P. 8)
9.
/vol /
(volume up/down) (P. 33 & 17)
10. */tone/< (P. 34 & 39)
11.speaker (P. 29)
12.intcom/hold (P. 52 & 31)
13.Headset Jack Cover
14.talk/flash (P. 30 & 31)
15.end (P. 30)
16.cid (P. 46)
17.#/> (P. 39)
18.phonebook (P. 37)
19.Handset Microphone
20.Handset Charging Contacts
CONTROLS &
FUNCTIONS
[4] CONTROLS & FUNCTIONS
www.uniden.com
TRU8860_1st.book 5 ページ
2004年1月6日 火曜日 午後6時40分
22
PowerMax 5.8GHz
21
23
24
25
26
21. Base Charging Contacts
22. Base Antenna
23. Charge LED
24. find handset (P. 54)
25. DC IN 9V Jack
26. TEL LINE Jack
CONTROLS &
FUNCTIONS
www.uniden.com
CONTROLS & FUNCTIONS [5]
TRU8860_1st.book 6 ページ
2004年1月6日 火曜日 午後6時40分
Display and Icons
Example of the standby mode display
Ringer off icon (when the ringer is off)/ day of the week and time / battery icon
Handset ID and Banner
Number of new Caller ID calls received (If there are no new Caller ID messages,
the Handset ID appears here.)
570#
*CPFUGV
0GY%+&
4'&+#.
/'07
ICON
Appears During
Standby/Talk
Standby
DESCRIPTION
Battery icons indicate the handset battery status. This icon changes depending on
the battery status (empty, low, medium and full).
The Ringer off icon indicates that ringer is turned off.
Talk
The Mute icon appears when you mute the handset.
Talk
The Speaker icon appears when the handset speaker phone is used.
Talk
The Privacy icon appears when the Privacy Mode is turned on.
www.uniden.com
D I S P L AY A N D I C O N S
[6] DISPLAY AND ICONS
TRU8860_1st.book 7 ページ
2004年1月6日 火曜日 午後6時40分
Animation Displays
The handsets have a variety of animation displays. Below are examples of the animation screens and
what they mean:
Turning on the phone
Hanging up the phone
9GNEQOG
2NGCUG9CKV
'PF
Making a call
Confirmation (Done!)
Deleting (Deleted!)
&QPG
&GNGVGF
Find Handset/Paging the Handset
6CNM
2CIKPI
/76'
%9&:
24+8#%;
Also, the animation display changes depending on the ringer volume setting.
4KPIGT8QNWOG
4KPIGT8QNWOG
4KPIGT8QNWOG
?
4'&+#.
/'07
4'&+#.
/'07
4'&+#.
/'07
Unavailable
Low Battery
1WV1H4CPIG
7PCXCKNCDNG
.QY$CVVGT[
4'&+#.
/'07
www.uniden.com
4'&+#.
/'07
DISPLAY AND ICONS [7]
D I S P L AY A N D I C O N S
Out of Range
TRU8860_1st.book 8 ページ
2004年1月6日 火曜日 午後6時40分
Soft Key Function
"Soft" keys are keys that change function during the operation of the phone. There are three soft keys on
each handset. Soft Keys allow you to:
- Access the main menu
- Set up CIDCW options
- Store or edit phone numbers
- Access stored Caller ID messages
- Redial one of the last three numbers dialed from the handset
- Access Voice mail waiting
Note: The soft keys will not appear while the handset is charging.
The function of each soft key is determined by the icon that appears directly above it. For example, when
the handset is in standby mode, pressing soft key 1 will redial the last dialed number. When the handset
is in talk mode, pressing soft key 1 will mute the microphone.
Complete information on the features controlled by the soft keys can be found under each feature.
In standby mode
570#
*CPFUGV
0GY%+&
/'07
Soft key 1
Soft key 2
6CNM
/76'
Soft key 3
[8] SOFT KEY FUNCTION
Soft key 1
%9&:
Soft key 2
/'07
Soft key 3
www.uniden.com
SOFT KEY FUNCTION
4'&+#.
In talk mode
TRU8860_1st.book 9 ページ
2004年1月6日 火曜日 午後6時40分
note
Do the following steps:
A. Choose the best location
B. Install the rechargeable battery pack into the handset.
C. Connect the base unit
A. Choose the best location
Before choosing a location for your new phone, read “Installation Considerations”
on page 62. Here are some important guidelines you should consider:
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid television sets and
other electronic equipment
Avoid noise sources such as a window
by a street with heavy traffic
Avoid microwave ovens
For maximum range:
•Keep the antenna free
of obstruction.
•When the handset is
not in use place the
handset in an upright
position.
•Do not hold the
handset where you
would block the signal.
Avoid excessive
moisture, extremely
low temperatures,
dust, mechanical
vibration, or shock
Correct
Avoid personal computers
Choose a central location
note
Avoid other cordless telephones
Incorrect
If your home has specially wired alarm equipment connected to the telephone line, be sure that installing the system does
not disable your alarm equipment.
If you have questions about what will disable alarm equipment, contact your telephone company or a qualified installer.
www.uniden.com
•Metal and reinforced
concrete may affect
cordless telephone
performance.
GETTING STARTED [9]
G E TTIN G S TARTE D
Setting up the Phone
TRU8860_1st.book 10 ページ
2004年1月6日 火曜日 午後6時40分
note
•Use only the Uniden
(BT-446) rechargeable
battery pack supplied
with your cordless
telephone.
•Replacement battery
packs are also available
through the Uniden
Parts Department at
(800) 554-3988,
Monday thru Friday
from 8:00 a.m. to 5:00
p.m. or online at
www.uniden.com
The handset is powered by a rechargeable battery pack. The battery recharges
automatically when the handset is placed in the base unit. To maximize the charge
capacity of your battery pack, DO NOT plug the telephone cord into the base unit
and wall jack until the battery is fully charged.
1) Press down on the handset battery case cover (use the
finger indention for a better grip) and slide the cover
downward to remove.
2) Turn the battery pack so that the connector with the red
and black wires is near the jack inside the battery
compartment. Match the connector's wire colors to the
polarity label in the battery compartment (the connector
notches fit into the grooves of the jack only one way).
Push the battery pack connector into the jack until it
clicks into place.
3) Make sure you have a good connection by gently pulling on
the battery wires. If the connection is secure, the battery
jack will remain in place.
4) Place the battery case cover back on the handset and slide
it upwards until it clicks into place.
[10] GETTING STARTED
www.uniden.com
GETTING STARTED
B. Install the rechargeable battery pack into the handset
TRU8860_1st.book 11 ページ
2004年1月6日 火曜日 午後6時40分
1) Connect the AC adapter to the DC IN 9V jack and to
a standard 120V AC wall outlet.
Connect the AC adapter to a continuous power
supply (i.e., an outlet that is not controlled by a
switch).
2) Set the base on a desk or tabletop, and place the
handset in the base unit.
Place the base unit close to the AC outlet so that
you can unplug the AC adapter easily.
3) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see that the
AC adapter is plugged in and the handset makes
good contact with the base charging contacts.
note
•Use only the supplied
[AD-800] AC adapter.
Do not use any other
AC adapter.
•Place the power cord
so that it does not
create a trip hazard or
where it could become
chafed and create a
fire or electrical
hazard.
4) After install the battery pack in the handset, charge
your handset for at least 15-20 hours before
plugging into the phone line.
5) Once the handset battery pack is fully charged,
connect the telephone line cord to the TEL LINE jack
and to a telephone outlet.
If your telephone outlet isn't modular,
contact your telephone company for
assistance.
www.uniden.com
GETTING STARTED [11]
G E TTIN G S TARTE D
C. Connect the base unit
TRU8860_1st.book 12 ページ
DO NOT use an AC outlet
controlled by a wall
switch.
GETTING STARTED
!
2004年1月6日 火曜日 午後6時40分
Mounting the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Make the AC adapter and the telephone line cord
through the hole on the wall mount adapter.
2) Plug the AC adapter into the DC IN 9V jack.
3) Plug the telephone line cord into the TEL LINE
jack.
4) Slide the wall mount adapter into the notches on
the base.
5) Plug the AC adapter into a standard 120V AC wall
outlet. Hook the cord on the notch of the wall
mount adapter.
6) Plug the telephone line cord into the telephone
outlet. Hook the cord on the notch of the wall
mount adapter.
7) Align the mounting slots on the base with the
mounting posts on the wall. Then push in and
down until the phone is firmly seated.
To remove, push up
a tab on the wall
mount adapter as
shown.
[12] GETTING STARTED
www.uniden.com
TRU8860_1st.book 13 ページ
2004年1月6日 火曜日 午後6時40分
If you don't have a standard wall plate, you can mount your phone directly to the
wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that could
cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths.
• Make sure the wall material is capable of supporting the weight of the base and handset.
• Use #10 screws (minimum length of 1 & 3/8 inches) with anchoring devices suitable for
the wall material where the base unit will be placed.
1) Insert two mounting screws into the wall (with
their appropriate anchoring device), 3 & 15/16
inches apart. Allow about 1/8 of an inch between
the wall and screw heads for mounting the phone.
2) Refer to steps 1 through 7 on page 12 to mount the
telephone.
www.uniden.com
GETTING STARTED [13]
G E TTIN G S TARTE D
Direct wall mounting
TRU8860_1st.book 14 ページ
note
2004年1月6日 火曜日 午後6時40分
Expanding Your Phone
10 Handset Expandability
Your phone supports up to 10 handsets,
including any handsets supplied with your
phone. You can now place a fully-featured
cordless handset anywhere AC power is
available to connect the handset charger.
Up to 2 handsets can be used in DirectLink
Mode or on an intercom call without interfering with incoming calls. If possible to
have a 3-way conference among 2 handsets and an outside line. All of handsets ring
when a call is received.
IMPORTANT:
If you purchase a TCX800 extra handset, please register the handset to the original/main
base before use. The TCX800 will not operate until it is registered.
If you change a global setting in one handset, you change that particular setting for all
registered handsets. All other settings (not included under Global Setup) must be set
separately through each handset.
Charge the handset
battery pack for at least
15-20 hours before
using your new cordless
telephone for the first
time.
Connecting the Charger
1) Connect the AC adapter to the DC IN 9V jack
and to a standard 120V AC wall outlet.
2) Set the charger on a desk or tabletop, and
place the handset in the charger with the
keypad facing forward. (See “B. Install the
rechargeable battery pack into the handset”
on page 10.)
[14] GETTING STARTED
www.uniden.com
TRU8860_1st.book 15 ページ
2004年1月6日 火曜日 午後6時40分
If you purchase an extra handset, you need to register the handset before use. Only
one handset can be registered at a time.
Handsets supplied with the phone are registered to the
2NCEGJCPFUGV
base by the factory. When charged, pre-registered
QPOCKPDCUG
handsets display a handset ID number. Handsets that have V Q T G I K U V G T
/76'
%9&:
not been registered display Place handset on main base to
re gis ter. When you register an extra handset to the base, the handset ID will be
assigned.
1) Before registering the extra handset,
the battery pack MUST be charged for
15-20 hours.
2) Place the extra handset in the main
base unit to begin registration.
3) While the handset is registering,
Han dse t Re gis ter ing will appear in the
LCD. When R egis tra tio n C omp let e is
displayed, the handset has been
registered to the base. If Reg ist rat ion
Fai led appears, please try these steps
again.
note
An extra handset can be
registered when the
main base is in standby
mode.
Pcegqrp_rgml
Amknjcrc
www.uniden.com
GETTING STARTED [15]
G E TTIN G S TARTE D
Register the Handset
TRU8860_1st.book 16 ページ
•For Global Setup and
Deregister HS menu
options, make sure the
line is not in use and
the handsets are
within range of the
base.
•Main menu flow chart
is provided on page
68.
Main Menu Options
Your phone has five main menu options: DirectLink Mode, Room/Baby Monitor,
Handset Setup, Global Setup and Deregister HS.
Default Settings
The default settings set from the factory match the features that most people use.
You may not need to change them. However, there are a number of options you
must set and entries you must make in memory to take full advantage of all the
phone features. The table below lists the default settings.
Function
Edit Voice Mail
Ringer Tone
Distinctive Ring
Auto Talk
Anykey Answer
Banner
Language (LCD)
Contrast
Key touch tone
Animation Screen
[16] GETTING STARTED
Default Settings
None
Flicker
On
Off
Off
Function
Day & Time
CW / CWDX
Area code
Dial Mode
Voice Mail Tone
Default Settings
SUN 12:00 AM
CW on/CWDX off
None
Tone
On
“ “
English
level 5
On
On
www.uniden.com
G E TTIN G S TARTE D
note
2004年1月6日 火曜日 午後6時40分
TRU8860_1st.book 17 ページ
2004年1月6日 火曜日 午後6時40分
G E TTIN G S TARTE D
Setting Menu Options
Using the interface
Below are some tips for using the software interface on your phone.
•Press
•Use
•Press
•Press
•Press
the MENU soft key to access the main menu.
/vol/∧ and /vol/∨ to scroll through options.
the OK soft key to make a selection.
the BACK soft key to return to the previous screen.
end to exit the menu.
&KTGEV.KPM/QFG
4QQO/QPKVQT
*CPFUGV5GVWR
$#%-
$#%-
1-
DirectLink Mode
In DirectLink mode, a pair of handsets can function as two-way radios. DirectLink
Mode allows two handsets to communicate with each other without the base unit or
a telephone line. Use them at sporting events or while shopping to stay in contact
with family members or friends. You must set both handsets to DirectLink Mode to
activate this feature.
Using DirectLink Mode
1) Press the MENU soft key and select the DirectLink Mode
menu. T o e nte r Di rec tLi nk mod e p ress [E NTE R] appears.
2) Press the ENTER soft key to enter DirectLink mode. You
will hear a confirmation tone, and Di rec tLi nk Mod e
Com ple te appears.
3) To return to normal mode, press the CANCEL soft key
and then the OK soft key, or return the handset to the
cradle.
www.uniden.com
note
You must have at least
two handsets to use
Direct Link Mode.
6QGPVGT
&KTGEV.KPMOQFG
RTGUU='06'4?
$#%-
$#%-
'06'4
GETTING STARTED [17]
TRU8860_1st.book 18 ページ
2004年1月6日 火曜日 午後6時40分
G E TTIN G S TARTE D
Room/Baby Monitor
note
•This feature only works
when the handset(s) is
within the range of the
base.
•You must have at least
two handsets to use
Room/Baby Monitor.
This feature allows you to monitor
sounds in another room. Place a
handset in the room you wish to
monitor; it will function as a
microphone. A second handset can be
set to function as a remote speaker,
allowing you to monitor sounds in the
room.
Using Room/Baby Monitor
1) Press the MENU soft key and select
the Room Monitor menu. T o R oom
Moni tor appears.
2) Select the handset you want to
monitor by using /vol/∧ or
/vol/∨ .
3) Press the OK soft key.
Room Mon ito r appears, and you hear sounds in the room
where the handset is installed.
4) To turn off the Room Monitor, press the END soft key,
or end.
[18] GETTING STARTED
4QQO/QPKVQT
㨬㨭*CPFUGV
'0&
www.uniden.com
TRU8860_1st.book 19 ページ
2004年1月6日 火曜日 午後6時40分
The following submenu options must be set separately for each handset.
Programming your Voice Mail Access Number
1) Press the MENU soft key. Select the Handset Setup
'FKV8AOCKN0Q
menu, and then the Edit Voice Mail submenu.
㨫
Edi t V _mai l N o. appears.
&2#75'
'.'6'
1&'.'6'
2) Enter your personal access number using the number
keypad (0-9),*/tone/<, #/>, the DELETE soft key, or
the PAUSE soft key (up to 20 digits).
3) Press the OK soft key. You will hear the confirmation tone.
To delete the current Voice Mail Access Number, delete all numbers in step2 using
the DELETE soft key and the OK soft key.
Selecting a Ringer Tone
Ringer Tone lets you choose from 10 ringer tones or 10 melodies:
- Ringers (Flicker, Clatter, Soft Alert, Wake Up, Light Bug, Beep Boop, Tone Board, Chip
Chop, Party Clap, Reminder)
- Melodies (Beethoven's Symphony #9 [Beethoven9], For Elise [Elise], We Wish You A Merry
Christmas [Merry- Xmas], Home Sweet Home [Hm Swt Hm], Lorri Song #6 [Lorri Song],
When Irish Eyes Are Smiling [Irish Eyes], Aura Lee, Let Me Call You Sweet Heart
[Sweetheart], Star Spangled Banner [Star Spngl], Old MacDonald [Old MacDld])
www.uniden.com
GETTING STARTED [19]
G E TTIN G S TARTE D
Handset Setup
TRU8860_1st.book 20 ページ
2004年1月6日 火曜日 午後6時40分
1) Press the MENU soft key. Select the Handset Setup
4KPIGT6QPGU
menu, and then the Ringer Tone submenu.
(NKEMGT
2) Press /vol/∧ or /vol/∨ to move the pointer. You % N C V V G T
&'.'6'
1will hear the ringer or melody as you scroll through the $#%options.
3) When you reach the ringer tone you want, press the OK soft key. You will hear a
confirmation tone.
Distinctive Ringer Setup
Distinctive Ringer allows you to assign a designated ring tone to a stored
phonebook number (100 stored locations available). When a call is received and the
Caller ID information matches the information in one of the phonebook memory
locations, the phone uses the distinctive ring assigned to that particular Caller. You
can assign distinctive rings to multiple phonebook memory locations. Switching the
setting to Distinctive Off disables distinctive ringing: all incoming calls will have a
normal ring tone. Switching to Distinctive On activates all programmed distinctive
ring memory locations.
1) Press the MENU soft key. Select the Handset Setup
menu, and then the Distinctive Ring submenu.
2) Press /vol/∧ or /vol/∨ to select On or O ff .
3) Press the OK soft key. You will hear a confirmation
tone.
[20] GETTING STARTED
&KUVKPEVKXG4KPI
1P
1HH
$#%-
&'.'6'
1-
www.uniden.com
G E TTIN G S TARTE D
You must set the separate ringer tone on each handset.
TRU8860_1st.book 21 ページ
2004年1月6日 火曜日 午後6時40分
Autotalk allows you to answer the phone simply by removing the handset from the
cradle. You do not have to press any buttons to answer the call.
1) Press the MENU soft key. Select the Handset Setup
menu and then the AutoTalk submenu.
2) Press /vol/∧ or /vol/∨ to select On or O ff .
3) Press the OK soft key. You will hear a confirmation
tone.
#WVQ6CNM
1P
1HH
$#%-
&'.'6'
1-
Setting the Anykey Answer
Any Key Answer allows you to answer the phone by pressing any number key, */tone/<,
or #/> on the handset.
1) Press the MENU soft key. Select the Handset Setup
menu, and then the Anykey Answer submenu.
2) Press /vol/∧ or /vol/∨ to select On or O ff .
3) Press the OK soft key. You will hear a confirmation tone.
www.uniden.com
#P[MG[#PUYGT
1P
1HH
$#%-
&'.'6'
1-
GETTING STARTED [21]
G E TTIN G S TARTE D
Setting the AutoTalk
TRU8860_1st.book 22 ページ
2004年1月6日 火曜日 午後6時40分
True Banner lets you customize the name your handset displays.
The name will be displayed on the LCD screen during Standby Mode, Intercom,
Intercom Hold, Room Monitor and Copy Phonebook operation. The banner name will
be displayed on the receiving handset as well.
1) Press the MENU soft key. Select the Handset Setup
menu, and then the Banner submenu.
2) Use the number keypad (0-9),*/tone/<, #/>, or the
DELETE soft key to enter or edit the name.
3) Press the OK soft key. You will hear a confirmation
tone.
$CPPGT
/
AQ
AO
A
AU
A2
AJ
AQ
AP
AG
A
$#%-
&'.'6'
1-
Selecting a Language
Language selects which language the menu display will use. Choose from English,
French, or Spanish.
1) Press the MENU soft key. Select the Handset Setup
.CPIWCIG
menu, and then the Language submenu.
'PINKUJ
(TCP㩟CKU
2) Press /vol/∧ or /vol/∨ to choose “English”,
$#%“Français” (French), or “Español” (Spanish).
3) Press the OK soft key. You will hear a confirmation tone.
[22] GETTING STARTED
1-
www.uniden.com
G E TTIN G S TARTE D
Setting the True Banner
TRU8860_1st.book 23 ページ
2004年1月6日 火曜日 午後6時40分
Contrast adjusts the handset LCD brightness. Choose one of the 10 levels for
optimum viewing.
1) Press the MENU soft key. Select the Handset Setup
%QPVTCUV
menu and then the Contrast submenu.
2) Press /vol/∧ or /vol/∨ to adjust the contrast of
$#%1the LCD (10 levels.)
3) Press the OK soft key. You will hear a confirmation tone.
Setting the Key Touch Tone
Key Touch Tone is the tone your keypad makes when keys are pressed. You can turn
this tone on or off.
1) Press the MENU soft key. Select the Handset Setup
menu and then the Key Touch Tone submenu.
2) Press /vol/∧ or /vol/∨ to select On or O ff .
3) Press the OK soft key. You will hear a confirmation
tone.
www.uniden.com
-G[6QWEJ6QPG
1P
1HH
$#%-
&'.'6'
1-
GETTING STARTED [23]
G E TTIN G S TARTE D
Adjusting the LCD Contrast
TRU8860_1st.book 24 ページ
2004年1月6日 火曜日 午後6時40分
The Animation screen displays animation on the handset
LCD. The animations will be displayed on the LCD screen
during a call, ringer volume setting, when you hang up,
and so on.
4KPIGT8QNWOG
4'&+#.
/'07
1) Press the MENU soft key. Select the Handset Setup
#PKOCVKQP5ETGGP
menu and then the Animation Screen submenu.
1P
1HH
2) Press /vol/∧ or /vol/∨ to select On or O ff .
$#%&'.'6'
13) Press the OK soft key. You will hear a confirmation
tone.
See "Animation Displays" on page 7 for all the available screens.
[24] GETTING STARTED
www.uniden.com
G E TTIN G S TARTE D
Setting the Animation Screen
TRU8860_1st.book 25 ページ
2004年1月6日 火曜日 午後6時40分
If you change one of the global settings, you change that setting for all registered
handsets. Only one handset can change global settings at a time.
note
For setting the Day and
Time, the idle time-out
is extended to 2
minutes.
Setting Day and Time
Day & Time sets the day and time of your display.
1) Press the MENU soft key. Select the Global Setup
&C[6KOG
menu, and then the Day & Time submenu option.
/10#/
2) Press /vol/∧ or /vol/∨ to select the day of the = ?
$#%5#8'
week, and then the →soft key.
3) Press /vol/∧ or /vol/∨ to set hour, and then press the →soft key.
4) Press /vol/∧ or /vol/∨ to set minute, and then press the →soft key.
5) Press /vol/∧ or /vol/∨ to choose AM or PM , and then press the SAVE soft key.
You will hear a confirmation tone.
www.uniden.com
GETTING STARTED [25]
G E TTIN G S TARTE D
Global Setup
TRU8860_1st.book 26 ページ
2004年1月6日 火曜日 午後6時40分
Caller ID on Call Waiting (CIDCW) displays the name and number of an incoming call
while you are on the line. Call Waiting Deluxe (CWDX) allows you to handle call
waiting calls in seven different ways.
1) Press the MENU soft key. Select the Global Setup
menu, and then the CIDCW submenu.
2) Press /vol/∧ or /vol/∨ to select C W On /C WDX On ,
CW O n / CWD X O ff , or C W O ff / CW DX Off , and then press
the OK soft key. You will hear a confirmation tone.
%+&%9
%91P%9&:1P
%91P%9&:1HH
$#%-
&'.'6'
1-
Setting the Area Code
note
If the area code has
already been stored in
memory, the stored area
code will be displayed.
To change it, use the
DELETE soft key and
number keys to enter
the new area code.
If you enter a 3-digit area code number in the "Area Code" option, your local area
code does not appear in the Caller ID message. For calls received from outside your
local area code, you will see a full 10-digit number.
If your calling area requires 10-digit dialing, do not program this option.
1) Press the MENU soft key. Select the Global Setup
#TGC%QFG
menu, and then the Area Code submenu.
㨫AA
2) Press the number keypad (0-9) to enter a 3-digit area
$#%&'.'6'
code.
3) Press the OK soft key. You will hear a confirmation tone.
[26] GETTING STARTED
1-
www.uniden.com
G E TTIN G S TARTE D
Setting CIDCW (Caller ID on Call Waiting)
TRU8860_1st.book 27 ページ
2004年1月6日 火曜日 午後6時40分
• If you are not sure of your dialing system, set the unit to tone dialing. Make a trial call. If
the call connects, leave the setting as is; otherwise set the unit to pulse dialing.
• If your phone system requires pulse dialing and you need to send DTMF tones in certain
situations during a call, you can switch over to tone dialing (refer to “Tone Dialing Switchover” on page 34).
1) Press the MENU soft key. Select the Global Setup
menu, and then the Dial Mode submenu.
2) Press /vol/∧ or /vol/∨ to select Ton e or
Pul se (the initial setting is Tone).
3) Press the OK soft key. You will hear a confirmation
tone.
&KCN/QFG
6QPG
2WNUG
$#%-
&'.'6'
1-
Setting Voice Mail Tone
Voice Mail Tone sets the voice mail tone. If your service does not support SDT
message signal, set your VMWI (Visual Message Waiting Inculcator) not to detect
SDT message signal.
1) Press MENU soft key. Select the Global Setup menu, and then the Voice Mail Tone
Submenu.
2) Press /vol/∧ or /vol/∨ to set the voice message 8 Q K E G / C K N 6 Q P G
indication (SDT message signal) to On or Off.
1P
1HH
3) Press the OK soft key. You will hear a confirmation
$#%&'.'6'
1tone.
www.uniden.com
GETTING STARTED [27]
G E TTIN G S TARTE D
Setting the Dial Mode
Sets the dial mode to tone or pulse. Most phone systems use tone dialing; the
default setting is tone dialing. Set the dialing mode to match the dialing system
used by your local phone service.
TRU8860_1st.book 28 ページ
2004年1月6日 火曜日 午後6時40分
Deregister HS clears the handset’s ID from the main base unit or the base ID from
the handset. You will usually only deregister the handset if you are having a
problem with your phone or if you need to change the digital security code. (see
page 54).
1) In standby mode, select Deregister HS in the menu and & G T G I K U V G T * 5 !
press the OK soft key. D ere gis ter HS ? appears.
;GU
2) Press /vol/∧ or /vol/∨ to select Yes and then the 0 Q
$#%&'.'6'
1OK soft key.
When de-registration is complete you will hear a confirmation tone, and
Dere gis tra tio n C omp let e appears.
3) After de-registering the handset, place the handset to the base to register. You
must re-register the handset before you can use it.
[28] GETTING STARTED
www.uniden.com
G E TTIN G S TARTE D
De-register the Handset
TRU8860_1st.book 29 ページ
2004年1月6日 火曜日 午後6時40分
Making and Receiving Calls
note
With the handset's duplex speakerphone, you can have handsfree conversations.
The icon appears on the display screen during hands-free
conversations.
For best performance
talk alternately with the
caller in a quiet room.
You can decrease the
speaker volume if you or
the other party has
difficulty hearing.
You can easily switch a call from normal conversation to
hands-free conversation. To switch a call, press speaker
during the call.
6CNM
BASICS
/76'
www.uniden.com
/'07
BASICS [29]
TRU8860_1st.book 30 ページ
2004年1月6日 火曜日 午後6時40分
From the handset
From the Handset
note
•To set "Autotalk", see
page 21 or to set
"Anykey Answer" see
page 21.
•If the line is in use by
another handset(s),
"Line In Us e "
appears in the display
of all registered
handsets that are not
in use.
[30] BASICS
Hands-free conversation
To answer a call
Handset Off the Cradle
Handset Off the Cradle
Press any number key, /tone/<, or Press speaker.
#/> (Any Key Answer), or press
talk/flash.
*
Handset Off the Cradle
1) Press speaker.
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number, and then press
speaker.
To make a call
Handset Off the Cradle
1) Press talk/flash.
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number, and then press
talk/flash.
To hang up
Press end or return the handset to the cradle (AutoStandby).
BASICS
•The handset
microphone is located
at the bottom of the
handset (see "Controls
and Functions" on
page 4). Position
yourself as near to the
handset as possible
and speak clearly.
Normal conversation
Handset On the Cradle
Pick up the handset (AutoTalk is:
on) or pick up the handset and press
talk/flash (AutoTalk is: off).
To enter a pause
When you dial the number in standby mode, press the PAUSE soft key.
within the dialing
P appears in the display, which represents a pause.
sequence
www.uniden.com
TRU8860_1st.book 31 ページ
2004年1月6日 火曜日 午後6時40分
Call Waiting
note
If you have Call Waiting service and a call waiting
tone sounds while you are on a call, press talk/flash
on the handset to accept the waiting call. There is a
short pause, and then you will hear the new caller. To
return to the original caller, press talk/flash again.
•You must subscribe
through your local
telephone company to
receive Call Waiting or
Caller ID on call
waiting service.
Placing a Call on Hold
You can place a call on hold for 5 minutes. When 5 minutes has passed, the call is
disconnected, and the phone returns to standby mode.
If you leave a call on hold for more than 10 seconds, the
display screen will read, L ine On Ho ld .
BASICS
1) During a call, press intcom/hold. The call will be put
on hold.
•While a call is on hold,
CIDCW can not be
received.
*QNFVQVTCPUHGT
*CPFUGV
*CPFUGV
$#%-
&'.'6'
1-
2) To talk to the caller, press talk/flash or speaker on a handset. The phone will
return back to the call.
www.uniden.com
BASICS [31]
TRU8860_1st.book 32 ページ
2004年1月6日 火曜日 午後6時40分
Redialing a Call
note
•If the number exceeds
32 digits, only the first
32 digits are retained
in redial memory.
•If the redial memory is
empty, you will hear a
beep.
The last three phone numbers dialed can be quickly
redialed from the handset. Redial numbers stored in the
handset are independent from each other.
1) With the phone in standby mode, press the REDIAL
soft key.
2) Press /vol/∧ or /vol/∨ to scroll through the last
three dialed numbers.
3) Press talk/flash or speaker on the handset. The
selected number is dialed.
4) To hang up, press end.
4GFKCN
$#%/vol/ or
&'.'6'
5614'
/vol/
4GFKCN
$#%/vol/ or
&'.'6'
5614'
/vol/
4GFKCN
&'.'6'
5614'
Deleting a Redial Record
1) With the phone in standby mode, press the REDIAL soft
key.
2) Press /vol/∧ or /vol/∨ repeatedly to display the
number to be deleted.
3) Press the DELETE soft key.
4) Press /vol/∧ or /vol/∨ to choose Y es .
5) Press the OK soft key. The redialed number is deleted.
&GNGVG4GFKCN!
;GU
0Q
$#%-
$#%-
1-
Storing a Redial Record
1) With the phone in standby mode, press the REDIAL soft key.
2) Press /vol/∧ or /vol/∨ repeatedly to display the number to be stored.
3) Press the STORE key. S tor e/E dit Na me appears.
4) To complete the setting, follow the steps 3-8 in "Phonebook (Storing Phone
Numbers, Names, Distinctive Rings, and Speed dial)" on page 37.
[32] BASICS
www.uniden.com
BASICS
$#%-
TRU8860_1st.book 33 ページ
2004年1月6日 火曜日 午後6時40分
Adjusting the Ringer, and Earpiece and Speaker
Volume
Ringer volume
In standby mode, press the volume up key or volume
down key on the handset to select one of three ringer
volume (Off, Low, or High).
Temporarily Muting the Ringer
You can mute the ringer individually on a handset. When the phone is ringing,
pressing the MUTE soft key on the handset you want to mute. This mute will last for
the current incoming call only. The ringer tone will return to the previous setting
on the next incoming call.
www.uniden.com
BASICS
Earpiece and Speaker Volume
You can select from among six volume levels on the
handset. Pressing the volume up key or volume down
key during a call will change the earpiece or speaker volume. This setting will
remain in effect after the telephone call has ended.
If you press the volume up key when the earpiece is at the maximum volume level,
an error tone sounds.
The error tone also sounds if you press the volume down key at the lowest volume.
note
While charging a
handset, you can not
mute the ringer tone for
the handset.
BASICS [33]
TRU8860_1st.book 34 ページ
2004年1月6日 火曜日 午後6時40分
Mute Microphone
You can temporarily mute the microphone so that the
6CNMߦ
caller cannot hear you. Press the MUTE soft key during
/WVG1P
talk mode (while the phone is in use) to mute the
/76'
24+8#%;
microphone. M ute On and
appear in the display. To
cancel muting, press the MUTE soft key again. Mute Of f appears.
Tone Dialing Switch-over
BASICS
If your telephone company requires pulse dialing, you
can switch-over to tone dialing after the call
connects. This feature is useful when you need tone
dialing to use any automated menu systems, such as
telephone bank tellers, telephone prescription refills,
customer support menus, etc.
If your phone is set to pulse dialing mode, make your
call normally. Once your call connects, press the */tone/< key. Any digits you enter
from then on will be sent as tone digits. When this particular call ends, the phone
automatically returns to pulse dialing mode.
[34] BASICS
www.uniden.com
TRU8860_1st.book 35 ページ
2004年1月6日 火曜日 午後6時40分
Travelling Out of Range
During a call, as you begin to move your handset too far from your base unit, noise
may increase. If you pass the range limits of the base unit, you will hear a beep and
see Ou t o f Ra nge on the display, and then the handset returns to standby mode.
Privacy Mode
www.uniden.com
BASICS
Privacy prevents interruption from other registered handsets. This works only
when the phone is in use.
Press the PRIVACY soft key on the handset during talk mode.
Privacy Mode On
and appear in the display. To exit the 6 C N M
Privacy Mode, press the PRIVACY soft key again when the 2 T K X C E [ / Q F G 1 P
Privacy Mode is on. Pri vacy Mo de Off appears.
24+8#%;
/76'
BASICS [35]
TRU8860_1st.book 36 ページ
2004年1月6日 火曜日 午後6時40分
Using One Touch Voice Mail Access
If you subscribe to voice mail service, you can use your phone to access your voice
mailbox. The new message LED flashes whenever you have messages waiting in your
voice mailbox.
Just program the handset with your access number, and you can get your messages
at the touch of a button on the handset. (The voice mail service provider will
supply you with the access number. This number may be simply a phone number.
Refer to the provider's literature.)
To program or delete your Voice Mail Access Number, See page 19.
note
Once you've programmed your personal access number, you can dial your mailbox
with the touch of a button. When you have messages, simply press the
soft key.
If you have not entered the access number or it has been deleted, when you press
the
soft key, No Num ber Sto red To st ore nu mbe r pr ess [M ENU ] appears and you
will hear a beep. The phone returns to standby mode.
Resetting the New Message LED
You must subscribe to
voice mail service from
your telephone company
in order to use this
feature. The voice mail
service company will
provide you with the
access number.
[36] BASICS
The LED flashes when you have new messages in the voice mail service. If the LED
remains on after you’ve retrieved your messages, you may need to reset the
indicators. With the phone is in standby mode, press and hold find handset on the
base unil the paging sound stops (about 5 seconds).
www.uniden.com
BASICS
Dialing your Voice Mail Service
TRU8860_1st.book 37 ページ
2004年1月6日 火曜日 午後6時40分
Phonebook (Storing Phone Numbers, Names, Distinctive
Rings and Speed Dial)
You can store names and numbers in your phone's phonebook, search for names
alphabetically, and dial phonebook entries with just a few key presses. You can
store up to 100 numbers in each registered handset.
The phone uses the same memory locations to store phonebook entries and Caller ID
messages. Any empty phonebook locations are used to store Caller ID messages. For
example, if you have stored 100 phonebook entries on your handset, the handset
will not store Caller ID messages.
1) When the phone is in standby mode, press phonebook.
The following items appear:
(1st line) The number of the phonebook locations used
(2nd line) How to search (press the number keypad,
/vol/∧ or /vol/∨ )
(3rd line) How to store (press the STORE soft key)
(4th line) The BACK, COPY, and STORE soft keys.
2JQPGDQQM
5GCTEJ=#<㨲㨱?
5VQTG=5614'?
$#%-
%12;
5614'
note
•When the memory is
full, you will hear a
beep and Memory Full
appears. You cannot
store names and
numbers.
•The pause key counts
as one digit. Pressing
the PAUSE soft key
more than once
increases the length of
the pause between
numbers. Each pause
represents a 2 second
delay.
www.uniden.com
PHONEBOOK [37]
PHONEBOOK
2) Press the STORE soft key, Stor e/E dit Na me appears.
5VQTG'FKV0COG
3) Enter the name (up to 16 characters) by using the
/QXKGU㨫
number keypad (see the "Steps for Entering Names
$#%&'.'6'
1and Special Characters" on page 39).
If a name is not required, go to step 4. <No Name> will be used as the name.
TRU8860_1st.book 38 ページ
2004年1月6日 火曜日 午後6時40分
4) Press the OK soft key to store the name;
5VQTG'FKV0Q
Stor e/E dit No . appears.
㨫
5) Use the number keypad, */tone/<, or #/> to enter the
&'.'6'
2#75'
1phone number (up to 20 digits).
If you make an error, use the DELETE soft key to erase the incorrect digits. When
you are finished, press the OK soft key to store the number.
6) Distinctive Ring appears. Press /vol/∧ or /vol/∨ & K U V K P E V K X G 4 K P I
0Q5GNGEVP
to move the pointer to one of the Distinctive Ring
(NKEMGT
options and then press the OK soft key.
$#%&'.'6'
1-
note
•If you choose not to
store a Distinctive
Ring, simply select the
“No Selection” option.
•If you choose not to
store the name/
number as a Speed
Dial, simply choose the
"No Selection" option.
7) Spee d D ial appears. Press /vol/∧ or /vol/∨ to
move the pointer to select the Speed dial location (10
locations: SPD1-SPD0).
8) Press the OK soft key. You will hear a confirmation
tone, and D one ! appears in the display.
5RGGF&KCN
0Q5GNGEVP
52&'ORV[
$#%-
&'.'6'
1-
/QXKGU
$GGVJQXGP52&
$#%-
&'.'6'
'&+6
Chain Dialing
The memory locations in the handset are not limited to phone numbers. You can
also store a group of numbers (up to 20 digits) that you need to enter once your
call connects. This is referred to as Chain Dialing.
[38] PHONEBOOK
www.uniden.com
PHONEBOOK
An example of this is a bank account number. Store the account number in one of
the phonebook locations (refer to "Phonebook (Storing Phone Numbers, Names,
Distinctive Rings and Speed Dial)" on page 37). When you call your bank and are
prompted to enter the account number, scroll through your phonebook locations
until you find your account number, and then press the DIAL soft key.
TRU8860_1st.book 39 ページ
2004年1月6日 火曜日 午後6時40分
Steps for Entering Names and Special Characters
Refer to the letters on the number keys to select the desired characters. With each press
of a number key (0-9), the displayed character appears in the following order:Upper case
letters first, lower case letters next and finally the number corresponding to the key.
Number of times key is pressed
www.uniden.com
PHONEBOOK [39]
PHONEBOOK
If you make a mistake while entering a name
Use */tone/< or #/> to move the cursor to the incorrect character.
Press the DELETE soft key to erase the wrong character, and then enter the correct
character. To delete all characters press and hold the DELETE soft key.
TRU8860_1st.book 40 ページ
note
If the next character
uses the same number
key, you must press #/ >
to move the cursor over.
Otherwise the next time
you press the number
key, it changes the
character that was
previously set.
2004年1月6日 火曜日 午後6時40分
For example, to enter Movies:
1) When the phone is in standby mode, press phonebook and the STORE soft key.
Stor e/E dit Na me appears.
2) Press 6 once, and then press #/> to move the cursor to the right.
3) Press 6 six times.
4) Press 8 six times.
5) Press 4 six times.
6) Press 3 five times.
7) Press 7 eight times.
8) When finished, press the OK soft key.
To continue to store the telephone number, proceed to step 5 in “Phonebook
(Storing Phone Numbers, Names, Distinctive Rings, and Speed dial)” on page 38.
PHONEBOOK
[40] PHONEBOOK
www.uniden.com
TRU8860_1st.book 41 ページ
2004年1月6日 火曜日 午後6時40分
Viewing the Phonebook
Your phone stores names/numbers in the phonebook memory locations, and you can
search names in alphabetical order. You can view the phonebook even while the
phone is in use.
1) Press phonebook. If you recall the phonebook during
a call, the COPY and STORE soft key will not appear.
2JQPGDQQM
5GCTEJ=#<㨲㨱?
5VQTG=5614'?
$#%-
%12;
5614'
2) Press /vol/∧, /vol/∨ , or the number keypad to
scroll through the phonebook locations. Phonebook locations appear in
alphabetical order (from first to last when you press /vol/∨ , from last to first
when you press /vol/∧).
You can also use the letters on the number keys to select the first letter of the
desired name. Press a number key (2-9 and 0) once for the first letter, twice for
the second letter, and so on. The first location that begins with the letter you
entered appears.
For example, to search for Movies, press 6 once. Press
until the phonebook location is displayed.
/vol/∧ or
/vol/∨ ,
www.uniden.com
During a call, don't
press end on the
handset or the call will
be disconnected.
PHONEBOOK [41]
PHONEBOOK
3) To finish the viewing operation, press end (or the BACK soft key or talk/flash
during a call).
note
TRU8860_1st.book 42 ページ
2004年1月6日 火曜日 午後6時40分
Making Calls Using the Phonebook
From Standby Mode
1) When the phone is in standby mode, select the
phonebook location to dial (see "Viewing the
Phonebook" on page 41).
2) Press talk/flash or speaker on the handset. The
displayed number is dialed.
3) To hang up press end.
/QXKGU
$GGVJQXGP52&
$#%-
&'.'6'
'&+6
From Talk Mode
1) Press talk/flash or speaker.
2) View the phonebook location to dial (see "Viewing the Phonebook" on page 41).
3) Press the DIAL soft key. The number in the displayed phonebook location is
dialed.
4) To hang up press end.
Speed Dialing
[42] PHONEBOOK
www.uniden.com
PHONEBOOK
If you store a phone number in a speed dial memory location (10 locations: SPD1 SPD0), you can use the speed dialing feature. When the phone is in standby mode,
press and hold a number key (0-9) associated with the speed dial until the phone
number appears, and then press talk/flash or speaker. The number stored in the
speed dial (SPD1 - SPD0) is dialed.
TRU8860_1st.book 43 ページ
2004年1月6日 火曜日 午後6時40分
Editing or Erasing a Stored Name, Phone Number,
Distinctive Ring and Speed Dial
1) When the phone is in standby mode, press
phonebook.
2) Press /vol/∧, /vol/∨ , or the number keypad to
select the phonebook locations (see "Viewing the
Phonebook" on page 41).
2JQPGDQQM
5GCTEJ=#<㨲㨱?
5VQTG=5614'?
$#%-
%12;
5614'
a. Editing the Stored Data
1) When the phonebook location to be edited appears,
5VQTG'FKV0COG
press the EDIT soft key. Sto re/ Edi t N ame appears.
7PKFGP%QTR㨫
2) Follow the steps 3 to 7 under "Phonebook (Storing
$#%&'.'6'
1Phone Numbers, Names, Distinctive Rings, and Speed
Dial)" on page 37 to complete the editing operation.
3) Press the OK soft key. You will hear a confirmation tone.
www.uniden.com
&GNGVG/GOQT[!
;GU
0Q
$#%-
$#%-
1-
PHONEBOOK
b. Deleting the Stored Data
1) When the phonebook location to be deleted appears,
press the DELETE soft key.
Del ete Mem ory ? appears.
2) Press /vol/∧ or /vol/∨ to move the pointer to
Yes .
3) Press the OK soft key. You hear a confirmation tone.
Del ete d! appears in the display.
PHONEBOOK [43]
TRU8860_1st.book 44 ページ
note
2004年1月6日 火曜日 午後6時40分
Copying Phonebook Locations
If the memory location
on the receiving
handset is full, and can
not store the phonebook
locations, you will hear
a beep.
Copy Phonebook allows you to transfer stored phonebook locations from handset to
handset so you don’t have to manually re-enter names and numbers. You can transfer
one memory (phonebook location) at a time, or all memory locations at once.
1) When the phone is in standby mode, press phonebook.
2) Press the COPY soft key.
3) Press /vol/∧ or /vol/∨ , to select the handset you
want transfer the phonebook locations and then press
the OK soft key.
4) Press
Memories:
/vol/∧ or /vol/∨ to select One
and then press the OK soft key.
Memory
or All
6QYJKEJWPKV!
*CPFUGV
*CPFUGV
$#%-
&'.'6'
1-
%QR[2JQPGDQQM
1PG/GOQT[
#NN/GOQTKGUZZZ
5) The phonebook locations will be transferred to the
handset. Copying and the receiving handset name appear.
When the transfer is completed Done! appears on the
handset.
[44] PHONEBOOK
%QR[KPI
*CPFUGV
%#0%'.
www.uniden.com
PHONEBOOK
$#%&'.'6'
1If you select All Memories, Are you sure? appears on the
display screen.
Press /vol/∨ or /vol/∧ to select Y es , and then press the OK soft key.
If you select One Memory, press /vol/∨ or /vol/∧, 6 Q U G N G E V
or the number key (2-9 and 0) to select the phonebook R J Q P G D Q Q M
R T G U U = # < 㨲 㨱?
location you want to export and then press the COPY
$#%soft key.
TRU8860_1st.book 45 ページ
2004年1月6日 火曜日 午後6時40分
You must subscribe to Caller ID services through your local telephone provider to
use these features.
When the telephone rings, the Caller ID feature allows you to view the caller’s
name, phone number, date and time of call. With CIDCW (Caller ID on Call Waiting),
you will hear a call waiting tone while you are on a call, and the Caller ID data is
displayed. To accept the waiting call, press talk/flash on the handset. Additionally,
you can dial a number stored in the Caller ID list or save data to your Phonebook
locations.
Important:
Memory locations for Caller ID messages and Phonebook locations (including Speed
Dials) are common; you can store up to 100 locations for each handset. A Caller ID
message is not stored when you have stored 100 of the phonebook locations. When
you have stored 100 of the phonebook locations and Caller ID messages in total,
the earliest Caller ID message is overwritten.
The date and time received
Caller's name
Caller's phone number
2/
,CPG5OKVJ
$#%-
&'.'6'
5614'
1) When the Caller ID message is received, the display shows the caller's phone
number along with the date and time. The incoming call information is stored in
the Caller ID record. If the Caller ID service includes the caller's name, the name
will appear in the display (up to 15 characters).
www.uniden.com
note
•If you answer a call
before the Caller ID
message is received
(for example, before
the second ring), the
Caller ID message will
not appear.
•When the call is
received via a
telephone company
that does not offer
Caller ID service, the
caller’s phone number
and name does not
appear. (This includes
some international
calls.)
•When the call is via a
private branch
exchange (PBX), the
caller's phone number
and name may not
appear.
CALLER ID [45]
CALLER ID
Caller ID and CIDCW (Caller ID on Call Waiting)
TRU8860_1st.book 46 ページ
The number of calls from
the same Caller ID
appears next to the
received time. Once you
view the new message,
the number will be
cleared and disappear.
You may receive any one of the following messages:
When invalid data is received; In com ple te Dat a
When a private name is received; Pr iva te Nam e
When a private number is received; Pr iva te Numb er
When a unknown name is received; Unk now n N ame
When a unknown number is received; U nkn own Nu mbe r
2) When you pick up the phone, the display changes to
(AutoTalk feature is set to on).
CALLER ID
note
2004年1月6日 火曜日 午後6時40分
Tal k .
Data errors appear as "❚."
Viewing the Caller ID List
You can view the Caller ID list through the handset during a call or when the phone
is in standby mode.
1) Press cid.
The summary screen appears. The screen shows the
number of new messages and total messages.
%CNNGT+&
0GY
6QVCN
$#%&'.'6'
2) To view the Caller ID messages in historical order
(from new to old or from old to new), repeatedly press
/vol/∨ to scroll through the messages from the latest to the earliest, or /
vol/∧ to scroll back through the messages.
[46] CALLER ID
www.uniden.com
TRU8860_1st.book 47 ページ
2004年1月6日 火曜日 午後6時40分
Deleting a Caller ID Message
Deleting Information from the Caller ID List
note
•During a call, don't
press end on the
handset or the call will
be disconnected.
•Once the Caller ID data
has been deleted, the
information cannot be
retrieved.
1) When the phone is in standby mode, view the Caller ID & G N G V G % C N N G T + &
information to be deleted (see "Viewing the Caller ID ; G U
0Q
List" on page 46).
$#%$#%12) Press the DELETE soft key. De let e C all er ID appears.
3) Press /vol/∧ or /vol/∨ to choose Y es .
4) Press the OK soft key. You will hear a confirmation tone.
www.uniden.com
CALLER ID [47]
CALLER ID
To view the Caller ID messages with alphabetical search, press the number key pad
(2-9 and 0) with the letter associated with the first letter of the desired message.
Once you view the Caller ID list with alphabetical search, you cannot switch
back to historical order (from new to old or from old to new) unless you
exit and re-enter the operation.
3) To finish the viewing operation, press end (or the BACK soft key or talk/flash
during a call).
TRU8860_1st.book 48 ページ
2004年1月6日 火曜日 午後6時40分
1) When the phone is in standby mode, press cid.
Press the DELETE soft key. De let e A ll? appears.
%CNNGT+&
0GY
6QVCN
$#%-
2) Press
/vol/∧ or
/vol/∨ to choose
Y es .
3) Press the OK soft key. You will hear a confirmation tone.
&'.'6'
&GNGVG#NN!
;GU
0Q
$#%-
$#%-
1-
Using the Caller ID Message List
Calling a party from the Caller ID list
Standby mode
1) When the phone is in standby mode, select the Caller ID 2 /
message (see "Viewing the Caller ID List" on page 46).
,CPG5OKVJ
2) To have the phone dial a "1" before the displayed Caller $#%&'.'6'
5614'
ID number, press */tone/<. To have the phone dial the
stored area code before the displayed Caller ID number, press #/>.
3) Press talk/flash or speaker. The displayed phone number dials automatically.
[48] CALLER ID
www.uniden.com
CALLER ID
Deleting all Caller ID names/numbers
TRU8860_1st.book 49 ページ
2004年1月6日 火曜日 午後6時40分
note
Storing Caller ID messages in the Phonebook
Messages shown in the Caller ID list can be stored in the phonebook. The phone
number and name of the party on the Caller ID list can be stored in memory.
1) When the phone is in standby mode, select the Caller ID message to be stored.
Then press the STORE soft key. Sto re/ Edi t Na me appears. If the Caller ID message
is already stored in memory, you will hear a beep and T his da ta is alr ead y
sto red !! appears. The number will not be stored.
2) To complete the setting, follow the steps 3-8 in "Phonebook (Storing Phone
Numbers, Names, Distinctive Rings, and Speed dial)" on page 37.
www.uniden.com
•When a long distance call
has been set, "1" appears
in the display.
•If the Caller ID message
was received as a private/
unknown number, or the
message does not have
the number, you cannot
store the message in the
Phonebook. If it was
received as private/
unknown name, the
message will be stored as
<No Name>.
•Even if the 100 memory
locations are full, the
message will be stored in
the Phonebook. However,
the message will be erased
from the Caller ID list.
CALLER ID [49]
CALLER ID
Talk mode
1) When the phone is in talk mode, select the Caller ID message you want to dial
(see "Viewing the Caller ID List" on page 46).
2) Press the DIAL soft key, and the number will be dialed.
TRU8860_1st.book 50 ページ
•To activate features
and display the CWDX
soft key, select C W
O n/C WDX On in the
CIDCW option. See
page 26.
•You can also answer a
waiting call
immediately by
pressing talk/flash,
the first caller will be
placed on hold. To
return to the original
caller, press talk/flash
again.
•If you don't press a key
within 30 seconds
while in the operation,
the phone returns to
the call.
•To return to the call,
press the BACK soft
key.
[50] CALLER ID
Call Waiting Deluxe Features
Your phone gives you new options for call waiting. At the touch of a button, you
can place the caller on hold, send them to your voice mail service, or conference
them into your current call. You must subscribe to Call Waiting and Call Waiting
Deluxe to use these features. Not all features are available in all areas. Check with
your local telephone company for details.
1) When you receive a Call Waiting call, press the CWDX soft key for a list of
options.
2) Press
/vol/∧ or
/vol/∨ or the number keypad (1-7) to select an option.
For example:
/vol/∨ 4 times
press
#UMVQ*QNF
6GNN$WU[
(QTYCTF%CNN
$#%-
$#%-
1-
press
(QTYCTF%CNN
#PUYGT&TQR
%QPHGTGPEG
$#%-
$#%-
1-
/vol/∨ 2 times
%QPHGTGPEG
&TQR(KTUV
&TQR.CUV
$#%-
$#%-
1-
3) Press the OK soft key. A confirmation screen will appear, and the phone returns
to the call.
Your phone is pre-programmed with seven call waiting options. You can select to
ask the calling party to hold, send them a busy message, forward them to your voice
mail, or answer and drop the first caller. You can also select to conference them
into the current call or, at any time, choose to drop the first or drop the last caller.
Check with your local telephone company for a full list of options.
www.uniden.com
CALLER ID
note
2004年1月6日 火曜日 午後6時40分
TRU8860_1st.book 51 ページ
2004年1月6日 火曜日 午後6時40分
Multi-Handset Features
The features in this section require a minimum of two handsets to operate. To add
additional handsets to your system, see "Expanding Your Phone" on page 14.
note
Handsets can be in
Direct Link mode while
other handsets are in
use.
Using the DirectLink Mode
To use this feature, you must enter the handsets
into DirectLink mode first.
To enter DirectLink mode, see page 17.
1) When the phone is in the DirectLink standby
mode, press the DirecLink soft key (example of
DirectLink from handset #1).
570#
*CPFUGV
&KTGEV.KPM/QFG
%#0%'.
2) Select the handset to which you wish to DirectLink
with by pressing the number keys (0-9). Your handset
will then page the other handset.
&KTGEV.KPM
6Q&KTGEV.KPM
CJCPFUGV
RTGUU=?
$#%-
3) On the receiving handset, press talk/flash, the
ANSWER soft key, or if Any Key Answer is on, press any
number key, */tone/<, or #/>.
&KTGEV.KPM
*CPFUGV
'0&
4) When you finish your conversation, press end or the
END soft key on either handset. Return the handset to the cradle, or press the
CANCEL soft key and then the OK soft key to return to normal standby mode
(cancelling DirectLink mode).
www.uniden.com
MULTI-HANDSET FEATURES [51]
M U LT I - H A N D S E T
F E AT U R E S
DirectLink call
TRU8860_1st.book 52 ページ
2004年1月6日 火曜日 午後6時40分
3-Way Conferencing
The phone permits 3-way conversations between 2 handsets and an outside line.
If the party is busy or
out of range, the
handset returns to
standby mode.
Intercom/Call Transfer Feature
If you have two or more handsets, you can use them as an intercom.
Also, you can place an outside call on hold and transfer the call to another
handset.
Intercom
1) In standby mode, press intcom/hold.
2) Select the handset you want to talk with within 30
6QKPVGTEQO
seconds. To select the handset, press /vol/∧ or / * C P F U G V *CPFUGV
vol/∨ , and then press the OK soft key. If you select
$#%&'.'6'
1All , all other handsets will be paged. An intercom
tone sounds.
To cancel intercom, press the CANCEL soft key on the initiating handset.
[52] MULTI-HANDSET FEATURES
www.uniden.com
M U LT I - H A N D S E T
FEATURES
note
1) Initiate the call normally. Once the call is in progress, other people can join the
call.
2) To join a conference call, press talk/flash or speaker to use the handset
speakerphone.
3) To leave a conference call, simply hang up as you normally would.
All other parties will remain connected.
4) To end a conference call completely, all local parties must hang up. The
conference call will also end when the calling party hang up.
TRU8860_1st.book 53 ページ
2004年1月6日 火曜日 午後6時40分
3) To answer the page, press talk/flash, intcom/hold, or + P V G T E Q O
the ANSWER soft key. If Any Key Answer is enabled,
*CPFUGV
pressing a number key, */tone/<, or #/> will answer
#059'4
the page. If AutoTalk is enabled, you can answer the
page by simply picking up the handset.
4) To hang up the intercom call, press end or the END soft key on either handset.
note
Call Transfer Feature
www.uniden.com
•If any you receive an
outside/intercom call
or page while selecting
the other handset, the
operation will be
cancelled.
•If the party does not
answer within one
minute, the operation
is cancelled.
MULTI-HANDSET FEATURES [53]
M U LT I - H A N D S E T
F E AT U R E S
1) During a call, press intcom/hold on the handset.
2) Select a handset to transfer the call to within 10
*QNFVQVTCPUHGT
seconds.
*CPFUGV
To select the handset, press /vol/∧ or /vol/∨ , and * C P F U G V $#%&'.'6'
1then press the OK soft key. If you select All , all other
handsets will be paged.
The call will automatically be placed on hold, and an intercom tone sounds.
To cancel the transfer, press the CANCEL soft key, talk/flash or speaker on the
initiating handset.
3) To answer the page on a handset, press talk/flash, intcom/hold, or the ANSWER
soft key. If Any Key Answer is enabled, pressing a number key, */tone/<, or #/>
will answer the page. If AutoTalk is enabled, you can answer the page by simply
picking up the handset.
4) To speak to the caller, press talk/flash on the receiving handset.
TRU8860_1st.book 54 ページ
note
If the battery pack is
completely drained, the
handset will not beep
when paging.
2004年1月6日 火曜日 午後6時40分
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset and
the base unit. Normally, setting the code is not necessary. In the rare situation that
you suspect another cordless telephone is using the same security code, you can
change the code. To change the digital security code:
1. De-register all the handsets you have (see “De-register the handset“ on page 28).
2. Register the handsets by following step 2-3 in “Registering the handset“ on page
15.
Find Handset
To locate the handset, press find handset on the base when the phone is in
standby mode. All registered handsets beep for 60 seconds, and P agi ng appears on
the handset display. To cancel paging, press any key on the handset or find
handset on the base.
Installing the Beltclip
[54] ADDITIONAL INFORMATION
www.uniden.com
ADDITIONAL
I N F O R M AT I O N
To attach the beltclip
Insert the beltclip into the holes on each side of the
handset. Press down until it clicks.
To remove the beltclip
Pull either side of the beltclip to release the tabs from
the holes.
TRU8860_1st.book 55 ページ
2004年1月6日 火曜日 午後6時40分
Headset Installation
Your phone can be used with an optional headset. To use
this feature, insert the headset plug into the headset jack.
Your phone is ready for hands-free conversations.
(Headset can be purchased by calling the Uniden Parts
Department or visiting the web site. See page 57.)
Note on Power Sources
•
•
•
•
Use only the specified Uniden battery pack (BT-446).
Do not remove the batteries from the handset to charge them.
Never throw the battery into a fire, disassemble them, or heat them.
Do not remove or damage the battery casing.
www.uniden.com
ADDITIONAL INFORMATION [55]
ADDITIONAL
I N F O R M AT I O N
Battery replacement and handling
When the operating time becomes short, even after a battery is recharged, please
replace the battery. With normal usage, your battery should last about one year.
Please contact your place of purchase or the Uniden Parts Department for a
replacement battery.
Warning
To avoid the risk of personal injury or property damage from fire or electrical shock,
only use the Uniden battery model and Uniden adapter model specifically
designated for this product.
Power Failure
During the period that the power is off, you will not be able to make or receive calls
with the telephone.
Caution
TRU8860_1st.book 56 ページ
2004年1月6日 火曜日 午後6時40分
Low battery alert
note
Even when the battery
pack is not being used,
it will gradually
discharge over a long
period of time. For
optimum performance,
be sure to return the
handset to the base
unit after each
telephone call.
When the battery pack is very low, the phone is programmed to eliminate functions
in order to save power.
The battery pack needs to be charged when:
- The empty battery icon appears.
.QY$CVVGT[
- L ow Bat ter y appears in the display.
If the phone is in standby mode, none of keys will
operate. If you are on a call, complete your conversation as quickly as possible, and
return the handset to the cradle.
Cleaning the battery charging contacts
To maintain a good charge, it is important to clean the
charging contacts on the handset once a month. Using water
only, dampen a cloth to clean the charging contacts. Then
make sure to go back over the charging contacts with a dry
cloth before returning the handset to the base to charge.
Caution: Do not use paint thinner, benzene, alcohol, or other
chemical products. Doing so can discolor the surface of the
telephone and damage the finish.
www.uniden.com
ADDITIONAL
I N F O R M AT I O N
[56] ADDITIONAL INFORMATION
contacts
TRU8860_1st.book 57 ページ
2004年1月6日 火曜日 午後6時40分
General Information
The phone complies with FCC Parts 15 and 68. Operating temperature:
0 °C to +50 °C (+32 °F to +122 °F)
AC Adapter Information
AC Adapter part number: AD-800 for the base
Input Voltage: 120 AC 60Hz
Output Voltage: 9V DC 350mA
AD-0005 for the charger (TRU8860-2 only)
120V AC 60Hz
9V DC 210mA
Battery Information
Battery part number: BT-446
Capacity: 800mAh, 3.6V
• To avoid damage to the phone use only Uniden AD-800 and BT-446, and AD-0005 with
your phone.
• If the handset is left off of the base, the actual Talk mode duration will be reduced
respective to the amount of time the handset is off the base.
Recharge your phone on a regular basis by returning the handset to the base after
each phone call. When the operating time becomes short even after the battery is
recharged, please replace the battery. With normal usage, the battery should last
about one year.
Specifications, features, and availability of optional accessories are all subject to
change without prior notice.
www.uniden.com
ADDITIONAL INFORMATION [57]
ADDITIONAL
I N F O R M AT I O N
A replacement Uniden adapter or battery can be purchased by contacting the
Uniden Parts Department (800) 554-3988. Hours are from 8:00 a.m. to 5:00 p.m.
Central Time, Monday through Friday, or www.uniden.com.
TRU8860_1st.book 58 ページ
2004年1月6日 火曜日 午後6時40分
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
Suggestion
• Make sure the AC adapter is plugged into the base or the charger (if you have more than one
The charge LED won't illuminate
handset) and wall outlet.
when the handset is placed in
• Make sure the handset is properly seated in the cradle.
the cradle.
• Make sure the charging contacts on the handset are clean.
The audio sounds weak.
• Move the handset and/or base away from metal objects or appliances and try again.
• Make sure that you are not too far from the base.
Can't make or receive calls.
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes, and then reconnect it.
• De-register the handset (see "De-register the Handset" on page 28) and register the handset
(see “Register the Handset" on page 15).
• Make sure that you are not too far from the base.
• Make sure the line is not in use.
• If an outside call is already established, you can not make another outside call.
The handset doesn't ring or
receive a page.
• Charge the batteries in the handset for 15-20 hours by placing the handset on the base or
charging cradle.
• Make sure that you are not too far from the base.
• De-register the handset (see "De-register the Handset" on page 28) and register the handset
(see "Register the Handset" on page 15).
Una vai lab le appears in
the display.
• Make sure that another handset(s) is not in use, and try the phone again.
• Make sure that you are not too far from the base.
[58] TROUBLESHOOTING
www.uniden.com
TROUBLESHOOTING
Troubleshooting
TRU8860_1st.book 59 ページ
2004年1月6日 火曜日 午後6時40分
Suggestion
Severe noise interference.
• Keep the handset away from microwave ovens, computers, remote control toys, wireless
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical
appliances.
• Move to another location or turn off the source of interference.
The Caller ID does not display.
• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service is current. There can be a
problem with your Caller ID service.
• Charge the battery pack for 15-20 hours.
You cannot register the handset
• De-register the handset (see "De-register the Handset" on page 28) and register the handset
at the base.
(see "Register the Handset" on page 15).
The handset doesn't
communicate with other
handsets.
• De-register the handset (see "De-register the Handset" on page 28) and register the handset
(see "Register the Handset" on page 15).
• Make sure that you have registered all handsets.
The handset can't join the
conversation
• Make sure there are not 2 handsets already using the 3-way conference feature.
• Make sure that another handset is not in privacy mode.
Room Monitor feature does not
work.
• Make sure to place the handset(s) within the range of the base.
If you still have a problem.
• Call our customer hotline at 1-800-297-1023.
www.uniden.com
TROUBLESHOOTING [59]
TROUBLESHOOTING
Symptom
TRU8860_1st.book 60 ページ
2004年1月6日 火曜日 午後6時40分
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps.
Case
If the handset or base is exposed to
moisture or liquid, but only affects the
exterior plastic housing.
If moisture or liquid has entered the
plastic-housing (i.e. liquid can be heard
in the phone or liquid has entered the
handset battery compartment or vent
openings on the base).
[60] TROUBLESHOOTING
Action
Wipe off the liquid, and use as normal.
Handset:
1)Remove the battery cover and leave it off for ventilation.
2)Remove the battery pack by disconnecting.
3)Leave the battery cover off and the battery pack disconnected for at least 3 days.
4)Once the handset is completely dry, reconnect the battery pack and the battery cover.
5)Recharge the handset's battery pack for 20 hours before using again.
Base:
1)Disconnect the AC adapter from the base unit, cutting off electrical power.
2)Disconnect the telephone cord from the base unit.
3)Let dry for at least 3 days.
IMPORTANT: You must unplug the telephone line while recharging the battery pack to
avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will cause permanent
damage to the handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work, please send to:
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
Ft. Worth TX 76155
1-800-554-3988. Monday through Friday
8 a.m. to 5 p.m. CST
www.uniden.com
TROUBLESHOOTING
Liquid Damage
TRU8860_1st.book 61 ページ
2004年1月6日 火曜日 午後6時40分
Precautions!
Before you read anything else, please observe the following:
Warning!
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage to the
unit, DO NOT expose this unit to rain or moisture.
Rechargeable Nickel-Metal-Hydride Battery Warning
• This equipment contains a rechargeable Nickel-Metal-Hydride battery.
• Nickel is a chemical known to state of California to cause cancer.
• The rechargeable Nickel-Metal-Hydride battery contained in this
equipment may explode if disposed of in a fire.
• Do not short-circuit the battery.
• Do not charge the rechargeable Nickel-Metal-Hydride battery used in
this equipment in any charger other than the one designed to charge
this battery as specified in the owner's manual. Using another charger
may damage the battery or cause the battery to explode.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
Uniden works to reduce lead content in our PVC coated cords in our
products and accessories.
Warning!
The cords on this product and/or accessories contain lead, a chemical
known to the State of California to cause birth defects or other
reproductive harm. Wash hands after handling.
Important Safety Instructions
When using your telephone equipment, these basic safety precautions
should always be followed to reduce the risk of fire, electrical shock, and
injury to persons:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Use a dry
cloth for cleaning without liquid or aerosol cleaners.
4. Do not use this product near water; for example, near a bathtub, wash
bowl, kitchen sink or laundry tub, in a wet basement, or near a
swimming pool.
5. Do not place this product on an unstable cart, stand, or table.
The telephone may fall, causing serious damage to the unit.
www.uniden.com
Additional Battery Safety Precautions
Caution!
To reduce the risk of fire or injury to persons by the battery,
read and follow these instructions:
1. Use only the Uniden battery pack specified in the owner's manual.
2. Do not dispose of the battery pack in a fire. The cell may explode.
Check the Nickel Metal Hydride battery disposal package insert for
disposal instructions.
3. Do not open or mutilate the battery pack. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It may be toxic
if swallowed.
4. Exercise care in handling the battery in order not to short the battery
with conducting materials such as rings, bracelets, and keys. The
battery or conductor may overheat and cause burns.
5. Charge the battery pack provided with or identified for use with this
product only in accordance with the instructions and limitations
specified in the owners manual provided for this product.
6. Observe proper polarity orientation between the battery pack and
battery charger.
SAVE THESE INSTRUCTIONS!
Important Electrical Considerations
Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiringand
damage any device connected to it. This phone is no exception.
The FCC Wants You To Know
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as detailed by
the owner's manual, could void your authority to operate this product.
Your telephone complies with Part 68 of FCC Rules. You
must, upon request, provide the FCC registration number and the REN to
your telephone company. Both numbers are on the base unit.
Note: You must not connect your phone to:
• coin-operated systems
• most electronic key telephone systems
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Privacy of
communications, may not be ensured when using this phone.
To insure the safety of users, the FCC has established criteria for the
amount of radio frequency energy various products may produce
depending on their intended usage. This product has been tested and
found to comply with the FCC's exposure criteria. For body worn
operation, the FCC RF exposure guidelines were also met when used with
the Uniden accessories supplied or designed for this product. Use of
other accessories may not ensure compliance with FCC RF exposure
guidelines and should be avoided.
Range
Your new phone is designed to achieve the maximum possible range by
transmitting and receiving according to the highest specifications set
forth by the FCC. We have rated this phone to operate at a maximum
distance with the qualification that the range depends upon the
environment in which the telephone is used. Many factors limit range,
and it would be impossible to include all the variables in our rating. The
Maximum Range rating of this phone is meant to be used as a means of
comparison against other range claims.
PRECAUTIONS & WARRANTY [61]
PRECAUTIONS &
WA R R A N T Y
Rechargeable Nickel-Metal-Hydride
Batteries Must Be Recycled or
Disposed of Properly
6. Slots and openings in the cabinet and the back or bottom are
provided for ventilation. To protect the product from overheating,
these openings must not be blocked or covered.
This product should never be placed near or over a radiator or heat
register. This product should not be placed in a built-in installation
unless proper ventilation is provided.
7. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of
power supply to your home, consult your dealer or local power
company.
8. Do not allow anything to rest on the power cord. Do not locate this
product where the cord will be damaged by persons walking on it.
9. Do not overload wall outlets and extension cords, as this can result in
the risk of fire or electrical shock.
10. Never push objects of any kind into this product through cabinet
slots, as they may touch dangerous voltage points or short out parts
that could result in a risk of fire or electric shock. Never spill liquid of
any kind on the product.
11. To reduce the risk of electric shock, do not disassemble this product.
Take it to qualified service personnel when service or repair work is
required. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric shock
when the appliance is subsequently used.
12. Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following the
operating instructions. (Adjust only those controls that are
covered by the operating instructions. Improper adjustment of
other controls may result in damage and will often require
extensive repair work by a qualified technician.)
E. If the product has been dropped or the cabinet has been
damaged.
F. If the product exhibits a distinct change in performance.
13. Do not use the telephone to report a gas leak in the vicinity of the
leak.
TRU8860_1st.book 62 ページ
2004年1月6日 火曜日 午後6時40分
Telephone Line Problems
The FCC has granted the telephone company the right to disconnect
service in the event that your phone causes problems on the telephone
line. Also, the telephone company may make changes in facilities and
services which may affect the operation of your unit. However, your
telephone company must give adequate notice in writing prior to such
actions to allow you time for making necessary arrangements to continue
uninterrupted service. If you are having trouble with your telephone
service, you must first disconnect your phone to determine if it is the
cause of your problem. If you determine that it is the cause, you must
leave it disconnected until the trouble has been corrected.
Radio Interference
More than One Cordless Telephone
If you want to use more than one cordless telephone in your home, they
must operate on different channels. Press the channel key to select a
channel that provides the clearest communication.
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications between the
handset and base of your cordless telephone are accomplished by means
of radio waves which are broadcast over the open airways.
Because of the inherent physical properties of radio waves, your
communications can be received by radio receiving devices other than
your own cordless telephone unit. Consequently, any communications
using your cordless telephone may not be private.
One Year Limited Warranty
Selecting a Location
Important: Evidence of original purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF
WARRANTY: Uniden warrants, for one year, to the original retail owner,
this Uniden Product to be free from defects in materials and
craftsmanship with only the limitations or exclusions set out below.
Before choosing a location for your new phone, there are some important
guidelines you should consider:
• The location should be close to both a phone jack and continuous
power outlet. (A continuous power outlet is an AC outlet which does
not have a switch to interrupt its power.)
• Keep the base and handset away from sources of electrical noise such
as motors or fluorescent lighting.
• Be sure there is sufficient space to fully extend the base antenna.
• The base can be placed on a desk or tabletop or mounted on a standard
telephone wall plate.
• You should charge your new phone for 15-20 hours before completing
the installation or using the handset.
Telephone Line Outlets
There are two types of phone outlets:
Modular Jack
Most phone equipment available now uses modular jacks. Phone cords are
fitted with a molded plastic connector which plugs into this type of jack.
If you do not have modular phone jacks, contact your local telephone
company for information about their installation.
Hardwired Jack
Some equipment is wired directly to a phone jack, and these types of
installations require a modular jack converter. This type of installation is
not difficult; however, you should contact your Uniden telephone dealer
or a telephone supply store for advice about the proper adapter or
converter for your particular situation.
Connecting the Telephone Cords
Consider these safety guidelines before connecting the telephone cords:
Caution!
• Never install telephone wiring during a lightning storm.
• Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected.
• Use caution when installing or modifying telephone lines.
Applying Power to the Base
This phone requires an AC outlet, without a switch to interrupt power,
and the included AC adapter. To relieve strain on the DC plug when the
phone is placed on a desk or table, wrap the power cord around the
strain relief notch on the bottom of the base.
NOTE: Place the power cord so that it does not create a trip hazard, or
where it could become chafed and create a fire or other electrical
hazards.
WARRANTY DURATION: This warranty to the original user shall terminate
and be of no further effect 12 months after the date of original retail
sale. The warranty is invalid if the Product is
(A) damaged or not maintained as reasonable or necessary, (B) modified,
altered, or used as part of any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) improperly installed, (D) serviced
or repaired by someone other than an authorized Uniden service center
for a defect or malfunction covered by this warranty, (E) used in any
conjunction with equipment or parts or as part of any system not
manufactured by Uniden, or (F) installed or programmed by anyone other
than as detailed by the owner's manual for this product.
STATEMENT OF REMEDY: In the event that the product does not conform
to this warranty at any time while this warranty is in effect, warrantor
will either, at its option, repair or replace the defective unit and return it
to you without charge for parts, service, or any other cost (except
shipping and handling) incurred by warrantor or its representatives in
connection with the performance of this warranty. Warrantor, at its
option, may replace the unit with a new or refurbished unit. THE LIMITED
WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY
PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL
OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS,
IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT
LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR
PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or
limitation of incidental or consequential damages so the above limitation
or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state. This warranty
is void outside the United States of America and Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner's manual you are certain that the
Product is defective, pack the Product carefully (preferably in its original
packaging). The Product should include all parts and accessories
originally packaged with the Product. Include evidence of original
purchase and a note describing the defect that has caused you to return
it. The Product should be shipped freight prepaid, by traceable means, to
warrantor at:
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
Fort Worth, TX 76155
(800) 297-1023, 8 a.m. to 5 p.m. CST, Monday through Friday
[62] PRECAUTIONS & WARRANTY
www.uniden.com
PRECAUTIONS &
WARRANTY
Radio interference may occasionally cause buzzing and humming in your
cordless handset, or clicking noises in the base. This interference is
caused by external sources such as TV, refrigerator, vacuum cleaner,
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If
these noises continue and are too distracting, please check around your
home to see what appliances may be causing the problem. In addition,
we recommend that the base not be plugged into a circuit that also
powers a major appliance because of the potential for interference. Be
certain that the antenna on the unit is fully extended when needed.
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving radio
signals from another cordless telephone or other source of interference.
If you cannot eliminate this type of interference, you need to change to
a different channel.
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs. To
minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR. If
interference is experienced, moving the cordless telephone farther away
from the TV or VCR will often reduce or eliminate the interference.
Installation Considerations
TRU8860_1st.book 63 ページ
2004年1月6日 火曜日 午後6時40分
I.C. Notice
TERMINAL EQUIPMENT
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.
This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies
that registration was performed based on a Declaration of Conformity indicating that Industry Canada
technical specifications were met. It does not imply that Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The
REN assigned to each terminal equipment provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of
all the devices does not exceed five.
RADIO EQUIPMENT
The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were
met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device. "Privacy of
communications may not be ensured when using this telephone".
I.C. NOTICE
www.uniden.com
I.C. NOTICE [63]
TRU8860_1st.book 64 ページ
2004年1月6日 火曜日 午後6時40分
Memory List
Name
Name
Phone No.
[64] MEMORY LIST
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
Phone No.
Name
Phone No.
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
www.uniden.com
MEMORY LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
TRU8860_1st.book 65 ページ
2004年1月6日 火曜日 午後6時40分
Memo
www.uniden.com
[65]
TRU8860_1st.book 66 ページ
[66]
2004年1月6日 火曜日 午後6時40分
www.uniden.com
TRU8860_1st.book 67 ページ
2004年1月6日 火曜日 午後6時40分
Index
0-9
20 ring options . . . . . . . . . . . . . .
3-Way Conferencing . . . . . . . . . . .
A
Animation screen . . . . . . . . . . . .
Anykey Answer . . . . . . . . . . . . . .
Area Code . . . . . . . . . . . . . . . . .
AutoTalk . . . . . . . . . . . . . . . . . .
B
Banner . . . . . . . . . . . . . . . . . . .
Battery
Replacement and handling. . . . .
Beltclip . . . . . . . . . . . . . . . . . . .
C
Call transfer feature . . . . . . . . . . .
Caller ID
Call Waiting . . . . . . . . . . . . . .
Caller ID services . . . . . . . . . . .
Calling . . . . . . . . . . . . . . . . . .
CIDCW . . . . . . . . . . . . . . . . . .
CWDX . . . . . . . . . . . . . . . . . . .
Deleting . . . . . . . . . . . . . . . . .
Setting . . . . . . . . . . . . . . . . . .
Storing. . . . . . . . . . . . . . . . . .
Viewing . . . . . . . . . . . . . . . . .
Chain dialing . . . . . . . . . . . . . . .
Clock. . . . . . . . . . . . . . . . . . . . .
Contrast. . . . . . . . . . . . . . . . . . .
Copying phonebook . . . . . . . . . . .
D
Deluxe Call Waiting Features . . . . .
De-register the handset . . . . . . . .
www.uniden.com
19
52
24
21
26
21
22
55
54
53
31
45
48
45
50
47
26
49
46
38
25
23
44
50
28
Dial mode . . . . . . . . . . . . . . . . . . 27
Digital security code . . . . . . . . . . 54
DirectLink. . . . . . . . . . . . . . . . . . 17
Distinctive ringer . . . . . . . . . . . . . 20
E, F, G, H
Earpiece volume. . . . . . . . . . . . . . 33
Expanding your phone . . . . . . . . . 14
General information . . . . . . . . . . . 57
Global Setup . . . . . . . . . . . . . . . . 25
hands-free conversation . . . . . . . . 29
Headset installation . . . . . . . . . . . 55
Hold . . . . . . . . . . . . . . . . . . . . . 31
I, J, K, L
I.C. notice . . . . . . . . . . . . . . . . . 63
Important safety instructions. . . . . 61
Intercom . . . . . . . . . . . . . . . . . . 52
Key touch tone . . . . . . . . . . . . . . 23
Language . . . . . . . . . . . . . . . . . . 22
Liquid damage . . . . . . . . . . . . . . . 60
M, N, O
Making a call. . . . . . . . . . . . . . . . 29
Mute . . . . . . . . . . . . . . . . . . . . . 34
P, Q
page . . . . . . . . . . . . . . . . . . . . . 54
Phonebook
Editing . . . . . . . . . . . . . . . . . . 43
Erasing . . . . . . . . . . . . . . . . . . 43
Making calls. . . . . . . . . . . . . . . 42
Storing . . . . . . . . . . . . . . . . . . 37
Viewing. . . . . . . . . . . . . . . . . . 41
Precautions. . . . . . . . . . . . . . . . . 61
Privacy Mode. . . . . . . . . . . . . . . . 35
R
Receiving a call . . . . . . . . . . . . . . 29
Redialing a call . . . . . . . . . . . . . .32
Register the handset . . . . . . . . . . .15
Ringer
Adjusting . . . . . . . . . . . . . . . . .33
Room/baby monitor . . . . . . . . . . .18
S
Setting up
base unit . . . . . . . . . . . . . . . . .11
extra handset . . . . . . . . . . . . . .15
Handset . . . . . . . . . . . . . . . 10, 19
Menu options . . . . . . . . . . . . . .17
Soft Key . . . . . . . . . . . . . . . . . . . 8
Speed dialing. . . . . . . . . . . . . . . .42
T, U, V, W, X, Y, Z
Transferring a call . . . . . . . . . . . . .53
Troubleshooting . . . . . . . . . . . . . .58
Voice Mail Access . . . . . . . . . . . . .36
Voice Mail Tone . . . . . . . . . . . . . .27
Warranty . . . . . . . . . . . . . . . . . . .62
INDEX
[67]
TRU8860_1st.book 68 ページ
2004年1月6日 火曜日 午後6時40分
570#
*CPFUGV
0GY%+&
4'&+#.
/'07
MENU
&KTGEV.KPM/QFG
4QQO/QPKVQT
*CPFUGV5GVWR
$#%-
$#%-
∨
1-
&KTGEV.KPM/QFG
4QQO/QPKVQT
*CPFUGV5GVWR
$#%-
$#%-
OK
6QGPVGT
&KTGEV.KPMOQFG
RTGUU='06'4?
$#%-
$#%-
'06'4
Enter
570#
*CPFUGV
&KTGEV.KPM/QFG
%#0%'.
&KTGEV.KPM
∨
1-
&KTGEV.KPM/QFG
4QQO/QPKVQT
*CPFUGV5GVWR
$#%-
OK
∧
or
∨
6Q4QQO/QPKVQT
*CPFUGV
*CPFUGV
*CPFUGV
*CPFUGV
*CPFUGV
*CPFUGV
*CPFUGV
*CPFUGV
*CPFUGV
$#%-
$#%-
1-
1-
OK
∧
or
∨
*#0&5'65'672
'FKV8QKEG/CKN
4KPIGT6QPGU
&KUVKPEVKXG4KPI
#WVQ6CNM
#P[MG[#PUYGT
$CPPGT
.CPIWCIG
%QPVTCUV
-G[6QWEJ6QPG
#PKOCVKQP5ETGGP
$#%-
[68] MAIN MENU FLOW CHART
$#%-
$#%-
1-
www.uniden.com
M A IN ME N U F LO W C H A RT
Main Menu Flow Chart
TRU8860_1st.book 69 ページ
2004年1月6日 火曜日 午後6時40分
4QQO/QPKVQT
*CPFUGV5GVWR
)NQDCN5GVWR
$#%-
$#%-
∨
1-
*CPFUGV5GVWR
)NQDCN5GVWR
&GTGIKUVGT*5
$#%-
$#%-
OK
∧
or
∨
$#%-
1-
OK
).1$#.5'672
&C[6KOG
%+&%9
#TGC%QFG
&KCN/QFG
8QKEG/CKN6QPG
$#%-
MAIN MENU FLOW CHART
∨
∧
or
∨
&GTGIKUVGT*5!
;GU
0Q
$#%-
$#%-
1-
OK
1-
&GTGIKUVTCVKQP
%QORNGVG
$#%-
$#%-
1-
2NCEGJCPFUGV
QPOCKPDCUG
VQTGIKUVGT
4'&+#.
www.uniden.com
/'07
MAIN MENU FLOW CHART [69]
TRU8860_1st.book 70 ページ
2004年1月6日 火曜日 午後6時40分
At Uniden, we'll take care of you!
If you need any assistance with this product, please call our Customer Hotline at
1-800-297-1023
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
Our Uniden representatives will be happy to help you with any matters regarding
the operation of this unit, available accessories, or any other related matters.
Thank you for purchasing a Uniden product.
Hours: M-F 8:00 AM to 5:00 PM CST.
www.uniden.com
?
For information on the accessibility features of this product, please call
1-800-874-9314 (V/TTY)
May be covered under one or more of the following U.S. patents:
4,523,058 4,595,795 4,797,916 5,381,460 5,426,690 5,434,905
5,491,745 5,493,605 5,533,010 5,574,727 5,581,598 5,650,790
5,660,269 5,661,780 5,663,981 5,671,248 5,696,471 5,717,312
5,732,355 5,754,407 5,758,289 5,768,345 5,787,356 5,794,152
5,801,466 5,825,161 5,864,619 5,893,034 5,912,968 5,915,227
5,929,598 5,930,720 5,960,358 5,987,330 6,044,281 6,070,082
6,125,277 6,253,088 6,314,278 6,418,209
[70]
R
IE
S,
M
@
FO OR E
CO
S
N
.
LI EN
ES
CC ON ID
A O
N
.U
G
W
W
W
R E G I S T E R O N L I N E T O D AY !
T H A N K Y O U F O R B U Y I N G A U N I D E N P R O D U C T.
©2004 Uniden America Corporation, Fort Worth, Texas. Contains additional foreign articles. Custom manufactured in China.
UPZZ01711BZ