®
H.264 4/8/16 Channel DVR
Quick Start Guide
Products: BLK-DH200400D, BLK-DH200800D, BLK-DH201600D
PLEASE READ THIS GUIDE BEFORE USING YOUR RECORDER, and always follow
the instructions for safety and proper use. Save this guide for future reference.
BLK-D20xx00D_RQ
3/2/11
© 2011 Supercircuits, Inc.
Specifications*
ITEM
Input
Video
Audio
Alarm
Output
BLK-DH200400D
BLK-DH200800D
Channel, Input Level
4/8/16 channel composite video, 1.0 Vp-p, 75Ω
Main Monitor Output
1 VGA (1280 x 1024 @ 60Hz),
Spot
2 (Event, Live)
Input & Output
4 CH line input & 1 CH line output
Audio CODEC
G.711 (ADPCM)
Sensor Input
4ch (NC/NO selectable)
Alarm Output
1 Alarm out by Sensor, Motion and Video Loss
Compression
H.264
Multi-operation
Record
Resolution
QUADPLEX (Playback/Record/Network/Backup)
D1
120 fps
120 fps
120 fps
Half D1
120 fps
240 fps
240 fps
CIF
120 fps
240 fps
480 fps
Recording quality grade
NETWORK, STANDARD, HIGH, SUPERIOR, ULTRA
Recording Mode
Continuous / Schedule / Motion/ Sensor/ Manual
Pre & Post Recording
Display
Yes
Frame rate ( /Sec)
30 fps/channel, 60 fields
Multi-Decoding
Playback
Playback speed
HDD
Storage
Serial port
1, 4, 8, 16
Single channel
× 2, 4, 8, 16
Multi-channels
× 2, 4
Capacity of 1 HDD
2TB
Internal HDD
1
E-SATA Port
1
USB Port
Backup
User I/F
2 (1 front, 1 rear)
USB flash drive
Video and still image
Network
Input method
Video and still image
Front button, remote control, mouse, keyboard controller
Console
1 RS-232C
PTZ and DVR keyboard control
1 RS-485
Termination
Network
Network
Access
Yes
Dynamic DNS
Yes (free DDNS)
Dual encoding for network streaming
CIF 120 fps/100 fps
Web viewer (1:1)
Live, Search, Backup, PTZF Cam Control, Remote Setup
Single site monitoring system:
UMS Single Client (1:1)
Live, Search, Backup, PTZF Cam Control, Remote Setup
Multi-sites monitoring system:
UMS Multi Client (1:n)
Live, Search, Backup, PTZF Cam Control, Remote Setup
DLS (Day Light Saving) & NTP
Features
Yes
Internal Beep
By Alarm, Motion, Video Loss, HDD error
Multi-Language
Yes (more than 13 languages)
3G mobile smartphone viewer
Power
BLK-DH201600D
Yes
Power Supply Voltage
DC 12V 5A
Operating temperature
41°F – 104°F (5°C – 40°C)
Storage temperature
Weight
Unit Weight / Gross weight
Dimension
WxHxD
14°F – 122°F (-10°C – +50°C)
9.04 lbs. / 13.67 lbs. (4.1Kgs / 6.2Kgs)
15.0” x 13.4” x 2.83” (380mm x 340mm x 72mm)
DVD RW drive disk compatibility
CD-R/W, DVD-R/W
* Specifications and exterior design are subject to change without notice.
Page 2
Prroduct C
Compone
ents
The
e package conttains the DVR unit
u and the components sho
own below.
DVR unit
So
oftware CD (with
h user manual) /
Quick
Q
Start Guide
/
HDD mounting sccrews ( 4 screws)
Ad
daptor (DC 12V 5A)
5 and power caable
Mouse
M
Re
emote control an
nd batteries
/
HDD mounting brracket and Screw
ws (1
et)
se
HDD Data Power Cable
C
(1)
Frront Panel
Front Panel L
LEDs
NO.
Na
ame
Description
A
H1~16
CH
Indicates thaat the channel is being recorded.
B
HDD
Indicates thaat the system is accessing the hard disk.
C
ALARM
Indicates thaat sensor(s) is/are
e triggered or mo
otion is detected.
D
NETWORK
Indicates thaat a network clien
nt is connected
E
ACKUP
BA
Indicates thaat a USB or DVD-R
RW device contains stored data
F
OWER
PO
Indicating th
hat the system is switched on.
Page 3
Front Panel B
Buttons
No.
Nam
me
Description
1
ey. For channel 11
1, press the +10 aand 1 key. For
Channel keys. For channel 10, press the 0 ke
channel 16,, press the +10 and 6 key.
2
In playbackk mode, press to rrewind the recorrding.
3
Press to sele
ect an audio mod
de:
MUTE – Mu
ute all 4 channels.
SINGLE - Highlighted chann
nel only.
MIX - Mix alll 4 channels.
4
Jump/step backward. In plaayback mode, the
e playback position moves 60 secconds
backward.
5
In playbackk mode, press to ffast forward the recording.
6
Press to enaable/disable ALA
ARM operation.
7
Jump/step forward. In playb
back mode, the playback
p
position
n moves 60 secon
nds forward.
8
Press to start or stop manuaal recording.
9
In live display mode, press to
t open the SEAR
RCH menu.
10
In playbackk mode, press to p
play/pause the fo
ootage.
11
Press to ope
en the SETUP me
enu.
12
Enable/disaable the automattic sequence of display
d
of channe
els in full screen, quad, 9-split
display mod
de.
13
Press to con
ntrol Pan/Tilt/Zoo
om operations.
14
Press to cap
pture video in jpe
eg format in live or playback mod
de.
15
 (LE
EFT)
Press to mo
ove left or to chan
nge the values in
n Setup mode. It is also used as th
he number 4
when enterring password.
16
 (U
UP)
Press to mo
ove up the menu in Setup mode. It is also used as the number 1 when
w
entering
password.
17
 (RIG
GHT)
Press to mo
ove right or to change the values in Setup mode. It
I is also used as the
t number
2 when entering password.
18
 (DO
OWN)
Press to mo
ove down the me
enu in Setup mod
de. It is also used
d as the number 3 when
entering paassword.
19
Press to sele
ect desired menu
u item or to store
e the setup value
e.
20
Press for tem
mporary storage
e of the changed value or to returrn to the previous menu
screen.
Page 4
No.
Nam
me
Description
21
USB port
p
22
OPEN/C
CLOSE
Press to ope
en or close the disk tray.
23
DVD drive
d
To save vide
eo, insert a CD-R//DVD-R
To save a sn
napshot image or video clip on a USB flash drive, or
o upgrade firmw
ware with a
USB flash drive, first connecct the USB flash drive
d
to the USB port.
p
Re
ear Pane
el
BLK-DH200400D
D DVR
BLK-DH200800D
D DVR
BLK-DH201600D
D DVR
Re
ear Panel C
Connectorss
No.
Label
Definition
1
VID
DEO IN
Video input terminals
2
CV
VBS OUT
Spot out term
minal. Spot out 1:: Live view screen
n. Spot out 2: On
ne channel screen
n with an event image.
3
AU
UDIO IN
Four connecttors for audio inp
put.
4
AU
UDIO OUT
One connector for audio outp
put.
5
VG
GA
VGA (Video Graphics
G
Array) output terminal. Connects
C
to the PC
P VGA monitor.
6
RS
S-232C
For engineeriing use only.
7
ET
THERNET
Network term
minal
8
SE
ENSOR IN
4 connectors for sensor devicce connection.
9
AL
LARM OUT
1 connector for
f alarm device connection. Provvides simple On//Off switching byy using relay. (A, B)
B
10
RS
S-485
RS-485 contro
ol terminal. (D+, D-)
11
PO
OWER
DC12V
12
US
SB
USB port
13
SA
ATA
External SATA
A port
14
Co
ooling fan
Page 5
Sy
ystem Installation and Se
etup
The following ssteps include the general procedure for installing an
nd setting up
p your system
m. For specificc instructions on
ps for the DVR
R, refer to the user manual provided on the
t CD with your
y
system.
performing anyy of these step
1.
Plan your entire installattion carefully, considering:

Position of the cam
meras to effecctively cover your surveilllance targets. Avoid locattions and orie
entations wh
here
bright light might sh
hine on or refflect onto the camera lens.

bling to the DV
VR. Is it easy for
f an intrude
er to disable th
he cameras?
Securitty of the cameera, and securrity of the cab

Locatio
on of the DVR
R. Is it in a secu
ure location? Is the temperrature and humidity accepttable?
2.
Install your cameras in acccordance with the manuffacturer’s instructions.
3.
Connect the video/audio
o and power extension
e
cab
bles to the cameras, and ro
oute them to the location of
o the DVR. Note
deo extension
n cables are usually
u
differeent at each en
nd; the end with
w the male power conneector attachess to
that the vid
the camera drop cable, the
t end with the
t female po
ower connector attaches to
o the power source and DV
VR.
4.
Place the DVR on a clean
n, flat surface. Do not applyy power to thee DVR at this time.
t
5.

Plug th
he USB mousee to the USB port
p on the DV
VR.

Connecct a monitor to
t the VGA co
onnector on th
he back of thee DVR.
Connect the video exten
nsion cable fro
om each camera to a video
o port on the back of your DVR.

If the camera
c
locatio
on has a micrrophone, also
o attach the audio
a
cable to
o an audio inp
put connecto
or on the backk of
the DVR.
6.
power extenssion cable to the
t cameras to
t the recomm
mended poweer source to power
p
them on.
o
Attach the p
7.
Power on th
he DVR.

Connecct the power adapter to the DC12V pow
wer connectorr on the back of the DVR.

Power on the monitor.

V outlet. When
W
the DVR
R is powering on,
Connecct the power cable to the power adapter and to a sttandard 120 VAC
an initialization wind
dow will appeear.
8.
ME window op
pens, use the mouse to op
pen the drop
pdown menu and select th
he language you
y
When the ffirst WELCOM
prefer to usse, then click Next.
N
NOTE: You
Y can also change
c
the lan
nguage settin
ng through th
he setup menus.
9.
In the second WELCOMEE window, use the mouse to open the dropdown menus
m
and sellect the date and time. Wh
hen
the correctt date and tim
me is shown,, click Next. NOTE: The date
d
and timee setup in the DVR is use
ed to timestamp
recorded video. It is veryy important th
hat this be sett correctly if video
v
recordin
ngs are used as
a evidence.
10. When the m
main screen opens,
o
you sh
hould see a video image from each cam
mera. Use this image to re
efine the man
nual
settings of the
t camera. These
T
settingss include the camera
c
directtion, and mayy include focu
us, zoom, and other setting
gs.
11. Right click the
t mouse an
nywhere on the DVR scree
en, or press th
he SETUP buttton on the frront panel to enter the Setup
Page 6
menu. In th
he pop-up win
ndow, click Se
etup.
12. In the login
n window, clicck the virtual keyboard button to open the keyboard
d window. Use the keyboaard to click in the
default ADM
MIN password, “1111”, the
en click OK. In
n the LOGIN window,
w
click OK
O again to open
o
the DVR Setup menus.
Configure the
t SETUP me
enus to custo
omize the DVR
R settings for your system.. Refer to the user manual included on the
CD for moree information
n about DVR Setup
S
and system configurration settingss.
Page 7
Network C
Connectiions
LA
AN Connectio
on – Using a crossover
c
cab
ble without a switching h
hub
Connect to the syystem directly using
u
a crossovver type network cable.
LA
AN Connectio
on – Using a switching
s
hu
ub
Connect to the syystem using a hub
h (switching hub) and an Etthernet cable (10BASE-T/100B
BASE-TX CAT 5 LAN cable).
Intternet (ADSL
L) Connection
n
Connect to the syystem using a ro
outer or ADSL modem and an
n Ethernet cablle (10BASE-T/10
00BASE-TX CATT 5 LAN cable).
Sm
martpho
one Accesss
Wh
hen your DVR iss configured fo
or access acrosss the Internet, you
y can remoteely monitor and
d control
you
u video securityy system over a Wi-Fi or 3G co
onnection using the free smarrtphone app Blackhawk.
Thiis app features::




View fro
om 1 to 16 cam
meras
View im
mages in portraiit or landscapee single channe
el)
Monitorr multiple locattions
3G/Wi-FFi compatible
Forr more informaation, and to do
ownload and in
nstall the app, go
g to:


®
®
®
®
Apple iPhone , iPod
d touch , or iP
Pad : http://itu
unes.apple.com
m/app/blackhaw
wk-for-iphone//id422091119??mt=8
Android
d™ phones: http://www.andrroidzoom.com//android_appliications/tools/b
blackhawk_tlcvv.html
Page 8