advertisement
VIZIO
®
VP505XVT1A User Manual
Dear VIZIO Customer,
Congratulations on your new VIZIO VP505XVT1A
Full High Definition PLASMA Television purchase.
Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VIZIO
Full High Definition Television with Hollywood
Quality Video Technology.
For assistance , please call (877)-698-4946 or e-mail us at
[email protected]
.
To purchase or inquire about accessories and installation services for your VIZIO PLASMA
FHDTV, please visit our website at
www.vizio.com
or call toll free at (888)-849-4623.
We recommend you register your VIZIO
VP505XVT1A either at our website
www.VIZIO.com
or fill in your registration card and mail it in. For peace of mind and to protect your investment beyond the standard warranty,
VIZIO offers on-site extended warranty service plans. These plans give additional coverage during the standard warranty period. Visit our website or call us to purchase a plan.
Write down the serial number located on the back of your VP505XVT1A.__ __ __ __ __ __ __ __ __
__ __ __ __ __
Purchase Date _____________________
VIZIO is a registered trademark of VIZIO, Inc. dba V, Inc.
HDMI logo and “High Definition Multimedia Interface” are registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.
THE TRADEMARKS SHOWN HEREIN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS; IMAGES USED ARE FOR
ILLUSTRATION PURPOSES ONLY. BRAVO, VIZIO AND THE V LOGO AND WHERE VISION MEETS VALUE AND OTHER
VIZIO TRADEMARKS ARE THE INTELLECTUAL PROPERTY OF VIZIO INC. PRODUCT SPECIFICATIONS ARE SUBJECT TO
CHANGE WITHOUT NOTICE OR OBLIGATION. © 2008 VIZIO INC. ALL RIGHTS RESERVED.
Version 8/21/2008 1 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Important Safety Instructions
This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Please read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.
• To reduce the risk of electric shock or component damage, switch off the power before connecting other components to the
VP505XVT1A.
• Unplug the power cord before cleaning the VP505XVT1A FHDTV. A damp cloth is sufficient for cleaning the VP505XVT1A. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
• Always use the accessories recommended by the manufacturer to insure compatibility.
• When moving the VP505XVT1A from an area of low temperature to an area of high temperature, condensation may form on the housing. Do not turn on the VP505XVT1A immediately after this to avoid causing fire, electric shock or component damage.
• Do not place the VP505XVT1A on an unstable cart, stand, or table. If the VP505XVT1A falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the VP505XVT1A.
• A distance of at least 3 feet should be maintained between the VP505XVT1A and any heat source, e.g. radiator, heater, oven, amplifier etc. Do not install the product close to smoke. Operating the product close to smoke or moisture may cause fire or electric shock.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the VP505XVT1A and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the VP505XVT1A in a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slot on the VP505XVT1A cabinet. Do not place any objects on the top of the product. It could short circuit parts causing a fire or electric shock. Never spill liquids on the VP505XVT1A.
• The VP505XVT1A should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
• The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact your dealer.
• The VP505XVT1A is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely.
Do not defeat the safety purpose of the grounded plug.
• When connected to a power outlet, power is always into your FHDTV. To totally disconnect the power, unplug the power cord.
• Use only with the cart, stand, tripod, bracket or table specified by manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-isolated dangerous voltage within the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• The wall socket shall be installed near the equipment and shall be easily accessible.
• Only the marked power source can be used for the product. Any power source other than the one specified may cause fire or electric shock.
• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
• Unplug the unit during a lightning storm or when it will not be used for long period of time. This will protect the VP505XVT1A from damage due to power surges.
• Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.
• Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
• Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair the product yourself.
• Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause fire or electric shock.
• Do not install the product in an area with heavy dust or high humidity. Operating the product in environments with heavy dust or high humidity may cause fire or electric shock.
• Follow instructions for moving the product. Ensure that the power connector and any other cables are unplugged before moving the product.
• Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and cause fire or electric shock. When the product will not be used for an extended period of time, unplug the power connector.
• To reduce risk of electric shock, do not touch the connector with wet hands.
Version 8/21/2008 2 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
• Insert batteries in accordance with instructions. Incorrect polarities may cause damage and leakage of the batteries, operator injury and contamination the remote controller.
• If any of the following occurs please contact the dealer: o
The power connector fails or frays. o
Liquids, sprays or any object falls into the VP505XVT1A. o
The Display is exposed to rain or other moisture. o
The Display is dropped or damaged in any way. o
The performance of the Display changes substantially.
• Operating environment. Temperature: 40˚F ~ 95˚F, Humidity: 20% ~ 80% non-condensing, Altitude: 0 ~ 6500ft (0 ~ 2000m)
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits.
Remember, the outer braid of the coaxial cable is intended to be connected to earth ground in the building installation.
FCC Bulletin for New TV Owners
After February 17, 2009, a television receiver with only an analog broadcast tuner will require a converter box to receive full power over-the-air broadcasts with an antenna because of the
Nation's transition to digital broadcasting. Analog-only TVs should continue to work as before to receive low power, Class A or translator television stations and with cable and satellite TV services, gaming consoles, VCRs, DVD players, and similar products.
Information about the DTV transition is available from http://www.DTV.gov
or this manufacturer at
877 MY VIZIO (877-698-4946) , and from http:/ /www.dtv2009.gov
or 1-888-DTV-2009 for information about subsidized coupons for digital-to-analog converter boxes.
Your VIZIO TV comes with a built-in tuner capable of processing digital broadcasts, making it easier for you to receive this type of signal without the need of an extra converter box.
Version 8/21/2008 3 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Opening the Package
Your VIZIO VP505XVT1A with Hollywood Quality Video Technology and its accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. After you have opened the carton, check that the TV is in good condition and that all of the accessories are included.
The VP505XVT1A weighs approximately 96lbs and is about 50” wide; please have at least 2 people to unpack and install this unit.
The screen can easily be scratched or broken so please handle the product gently and never place the
TV with the glass facing downwards on a surface without protective padding.
IMPORTANT: Save the carton and packing material for future shipping.
Package Contents
VIZIO VP505XVT1A Plasma TV
VIZIO Universal Remote Control VUR8P
HDMI Cable
Premium Size VIZIO Screen Cleaning Cloth
Power Cord
This User Manual
Quick Setup Guide
Safety Strap
Registration Card
VIP Services Brochure
2 AA Batteries for the Remote Control
IMPORTANT: Do not apply pressure or throw any object into the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installation.
Version 8/21/2008 4 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Additional Certified Accessories for the VIZIO
VP505XVT1A are sold separately
Wall Mounts
High Definition Cables
Extra or replacement Remote
VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO TV.
To purchase or inquire about additional accessories and services for your VIZIO product, visit our web site at www.VIZIO.com
or call us toll free at 888-VIZIOCE (888-849-4623)
Installation Preparation
Please read this user manual carefully before installing your VIZIO FHDTV.
The power consumption of the TV is up to 600W, please use the power cord designated for TV. When an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space between the back of the TV and the wall. If you would like to mount your TV on the wall, please see below ‘Preparing Your PLASMA FHDTV for Wall Mounting’ for additional information. Avoid installing the
TV in places with high humidity, dust or smoke so as not to shorten the service life of the electronic components.
Install the TV in landscape orientation; any 90˚ clockwise or counter-clockwise installation may induce poor ventilation resulting in excessive heat and component damage.
The VIZIO VP505XVT1A can either be kept on the stand base or mounted on the wall for viewing. If you choose to mount the VP505XVT1A on the wall, please refer to “preparing your PLASMA FHDTV for wall mounting” on page 6.
VIZIO offers professional installation services. Please contact VIZIO for more information on these services at 888-VIZIOCE (888-849-4623) or www.VIZIO.com
.
Attaching the Safety Strap
When the VP505XVT1A is not mounted with a Wall Mount, a Safety Strap has been included to attach the TV to the wall to reduce the chance of the TV being pulled over. The Safety Strap should be used with common sense practice such as ensuring that children (or adults) do not climb up, grabbing the top of the TV and pulling it onto themselves.
1. Fix one end of the strap to the wall. If you have a drywall finish it is preferable to fix it to a stud, using a washer underneath the screw head. If you have a solid wall you should use a lag bolt, again using a washer under the head.
2. Fix the other end of the Safety
Strap to one of the upper wall mount holes on the back of the
TV, using a washer under the screw head.
Version 8/21/2008 5 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Preparing Your PLASMA FHDTV for Wall Mounting
To remove the stand base
1.
2.
3.
4.
5.
Unplug the power cord and all cables from your VIZIO VP505XVT1A.
Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV.
Remove the cover on the stand.
Remove the six (6) screws holding the base to the TV.
Carefully remove the stand base.
Note:
It is recommended to place the screws back into place for future use; in case that the base needs to be attached back to the TV.
Now the VP505XVT1A can fit securely to a mount (sold separately) by utilizing the mounting holes in the center of the back panel of the TV. Please make sure to read the instructions for your specific mount to properly hang the VP505XVT1A.
The pitch of the mounting holes is 600mm horizontally and 200mm vertically.
The screw type required is metric M8, 20mm long,
1.25mm pitch. The length of the screws will depend on the thickness of the brackets being attached to the TV. VIZIO mount brackets come with different length screws.
To find the perfect mount for your VIZIO VP505XVT1A, browse VIZIO’s certified mount selection at www.VIZIO.com
or call directly 888-VIZIOCE (888-849-4623).
Version 8/21/2008 6 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Table of Contents
Chapter 1 Basic Controls and Connections............................................................ 9
1.1 Front Panel .......................................................................................................................................................... 9
1.2 Side Panel Controls ............................................................................................................................................. 9
1.3 Rear Panel Connections ................................................................................................................................... 10
1.4 Right-Side Panel Connection ............................................................................................................................ 11
1.5 VIZIO Universal Remote Control ....................................................................................................................... 12
1.5.1 Insertion of Batteries in the Remote Control .............................................................................................. 15
1.5.2 Remote Control Range .............................................................................................................................. 15
1.5.3 VIZIO Universal Remote Control Precautions ........................................................................................... 15
Chapter 2 Connecting Equipment ........................................................................... 16
2.1 Which Video Connection Should I Use? ............................................................................................................ 16
2.2 Connecting Coaxial (RF) ................................................................................................................................... 17
2.2.1 Using Your Antenna or Digital Cable for DTV ............................................................................................ 17
2.2.2 Using the Antenna or Cable through your VCR ......................................................................................... 17
2.3 Connecting Your HDTV Set-Top Box ................................................................................................................ 18
2.3.1 Using HDMI Input ...................................................................................................................................... 18
2.3.2 Using Component Video ............................................................................................................................ 20
2.4 Connecting Your Basic Set-Top Box ................................................................................................................. 21
2.4.1 Using Composite Video ............................................................................................................................. 21
2.4.2 Using Coax (RF) ........................................................................................................................................ 21
2.5 Connecting Your DVD Player ............................................................................................................................ 22
2.5.1 Using HDMI Input ...................................................................................................................................... 22
2.5.2 Using Component Video ............................................................................................................................ 24
2.5.3 Using S-Video (AV/S-VIDEO) .................................................................................................................... 25
2.5.4 Using Composite (AV) Video Input ............................................................................................................ 26
2.6 Connecting an external Receiver/Amp .............................................................................................................. 28
2.6.1 Optical Output of Audio received ............................................................................................................... 29
2.7 Connecting a PC (Computer) ............................................................................................................................ 30
2.7.1 Preset PC Resolutions ............................................................................................................................... 31
Chapter 3 Setting Up to Watch Television ............................................................ 32
3.1 Basic PLASMA FHDTV Start Up ....................................................................................................................... 32
3.2 ATV/DTV Tuner Setup ...................................................................................................................................... 36
3.3 Watching a TV Program .................................................................................................................................... 38
3.4 Adjusting Basic FHDTV Settings ....................................................................................................................... 39
3.5 Program Information .......................................................................................................................................... 40
3.6 Information on FHDTV Status ........................................................................................................................... 40
Chapter 4 Advanced Adjustment of FHDTV .......................................................... 41
4.1 Using the On Screen Display (OSD) ................................................................................................................. 41
4.2 TV Inputs Picture Adjustment ............................................................................................................................ 42
4.2.1 Picture Mode ............................................................................................................................................. 42
4.2.2 Brightness .................................................................................................................................................. 42
4.2.3 Contrast ..................................................................................................................................................... 43
4.2.4 Color .......................................................................................................................................................... 43
4.2.5 Tint ............................................................................................................................................................. 44
4.2.6 Sharpness ................................................................................................................................................. 44
4.2.7 Color Temperature..................................................................................................................................... 45
4.2.8 Advanced Video Features ......................................................................................................................... 45
4.2.9 Reset Picture Mode ................................................................................................................................... 46
4.3 TV Input Display (Screen) Adjustments ............................................................................................................. 47
4.3.1 Auto Adjust ................................................................................................................................................ 47
4.3.2 Wide Mode ................................................................................................................................................ 48
4.3.3 Horizontal Position ..................................................................................................................................... 48
4.3.4 Vertical Position ......................................................................................................................................... 48
4.3.5 Clock .......................................................................................................................................................... 48
4.3.6 Phase ........................................................................................................................................................ 49
4.3.7 Overscan ................................................................................................................................................... 49
4.4 TV Inputs Audio Adjustment .............................................................................................................................. 50
4.4.1 Volume ...................................................................................................................................................... 50
4.4.2 Bass ........................................................................................................................................................... 50
4.4.3 Treble ........................................................................................................................................................ 51
Version 8/21/2008 7 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
4.4.4 Balance ...................................................................................................................................................... 51
4.4.5 SRS TruSurround HD (SRS TSHD) ........................................................................................................... 51
4.4.6 Speakers ................................................................................................................................................... 51
Chapter 5 SPECIAL FEATURES .................................................................................. 52
5.1.1 MTS ........................................................................................................................................................... 52
5.2 Special Features Adjustments ........................................................................................................................... 52
5.2.1 Language ................................................................................................................................................... 52
5.2.2 Sleep Timer ............................................................................................................................................... 52
5.2.3 Analog CC (Closed Caption) ..................................................................................................................... 52
5.2.4 Digital Closed Caption Style ...................................................................................................................... 53
5.2.5 PIP (Picture-in-Picture) .............................................................................................................................. 54
5.2.6 Image Cleaner ........................................................................................................................................... 55
5.2.7 Reset All Settings ...................................................................................................................................... 55
5.3 Parental Control ................................................................................................................................................ 56
5.3.1 DTV / TV Input Parental Control ................................................................................................................ 56
5.3.2 Parental Lock Enable................................................................................................................................. 56
5.3.3 Digital TV Parental Control ........................................................................................................................ 57
5.3.4 TV Rating ................................................................................................................................................... 58
5.3.5 Movie Rating .............................................................................................................................................. 58
5.3.6 Blocked Unrated Programming .................................................................................................................. 59
5.3.7 Access Code Edit ...................................................................................................................................... 59
5.4 Understanding Viewing Features ...................................................................................................................... 60
5.4.1 Viewing Modes .......................................................................................................................................... 60
Chapter 6 Picture-In-Picture (PIP) Mode ................................................................ 61
6.1 PIP Mode Adjustments ...................................................................................................................................... 61
6.1.1 Adjusting Basic PIP Settings ..................................................................................................................... 61
6.2 Programming the VIZIO Universal Remote Control ........................................................................................... 62
6.2.1 Programming for Audio Tuner Amplifier ..................................................................................................... 62
6.2.2 Programming for Cable Set-Top Box ......................................................................................................... 62
6.2.3 Programming for DVD Player .................................................................................................................... 63
6.2.4 Searching for Component Codes .............................................................................................................. 63
6.3 Using a Cable or Satellite Remote .................................................................................................................... 63
Chapter 7 Maintenance and Troubleshooting ...................................................... 64
7.1 Maintenance ...................................................................................................................................................... 64
7.2 Troubleshooting Guide ...................................................................................................................................... 64
7.3 Telephone & Technical Support ........................................................................................................................ 66
7.4 Compliance ....................................................................................................................................................... 67
7.5 FCC Class B Radio Interference Statement ...................................................................................................... 67
Chapter 8 Miscellaneous Information ..................................................................... 68
8.1 Specifications .................................................................................................................................................... 68
8.2 Glossary – Standard Definitions ........................................................................................................................ 69
8.3 Index ................................................................................................................................................................. 70
8.4 Component Program Codes .............................................................................................................................. 72
Version 8/21/2008 8 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Chapter 1 Basic Controls and Connections
1.1
Front Panel
POWER ‘VIZIO’ LIGHT – The VIZIO name lights white when powered on and orange when in the Standby mode.
REMOTE CONTROL SENSOR – This is the window through which the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal.
1.2
Side Panel Controls
POWER ( ) – Switch the VP505XVT1A on by pressing the button once.
Press the button again to turn the VP505XVT1A off.
MENU – This button activates the On Screen Display (OSD) menu.
CH + / - – Use these buttons to step the TV channels up or down. While the OSD is active, these buttons function as up and down controls in the OSD menus.
VOL + / – Use these buttons to increase or decrease the speaker volume. While the OSD is active, these buttons function as left and right controls in the OSD menus.
INPUT (ENTER) – Pressing this button will display the input options, then using the CH+ or CH- will allow you to navigate through the input sources: TV,
AV (S-Video), AV (Composite), Component, RGB,
HDMI 1, HDMI 2, HDMI 3 and HDMI 4. Additionally, when the OSD is active, this button confirms the menu function to be adjusted.
Version 8/21/2008 9 www.VIZIO.com
1.3
Rear Panel Connections
1 2 5 6 8
VIZIO
®
VP505XVT1A User Manual
10 11 12
3 4 7 9
1. SERVICE – This custom communication port is for factory service only. Use of this input for any purpose other than factory authorized service will void the manufacturer’s warranty of this equipment.
2.
IN – Connect the primary source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source, then use the S-Video or yellow connector to connect the external video from the same source. The S-Video, if connected, will take priority over AV RCA (yellow) connector. The yellow color band on the rear of the TV indicates this connection.
4.
COMPONENT (YPb/CbPr/Cr with Audio L/R) – Connect the source for component video devices such as a DVD Player or set top box here. From left to right, use white for left audio and red for right audio inputs, green for Y, blue for Pb (or Cb) and red for Pr (or Cr). The green color band on the rear of the TV indicates this connection.
5.
OPTICAL AUDIO OUT – The audio signal associated with an input selected for viewing will be available on this SPDIF Optical connector for connection to your home theatre system.
The white color band on the rear of the TV indicates this connection.
ANALOG AUDIO OUT – Connect the audio from the PLASMA FHDTV to an external device, such as a home theater system, external amplifier or stereo. Speakers cannot be connected directly to these outputs. The white color band on the rear of the TV indicates this connection.
6.
7.
8.
RGB PC – Connect the video and audio from a computer here. The blue color band on the rear of the TV indicates this connection. A 1/8” plug stereo cable is needed to connect the audio out from the computer to the connector in the rear of the TV for audio from computer.
HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection.
HDMI 2 – Connect a secondary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. For users who want to connect to a DVI enabled device, use a
DVI-HDMI cable and connect the Analog Audio output of the device to the L+R AUDIO here.
VIZIO Certified HDMI and HDMI-DVI cables are available for purchase from www.VIZIO.com
or by calling 888-VIZIOCE (888-849-4623). for any purpose other than factory authorized service will void the manufacturer’s warranty of this equipment.
10. SERVICE 2 – This custom communication port is for factory service only. Use of this input for any purpose other than factory authorized service will void the manufacturer’s warranty of this equipment.
11. DTV/TV – Connect to an antenna or digital cable (out-of-the-wall, not from Cable Box) for
Digital and Analog TV.*
12. AC IN – Plug in the supplied AC Power Cord here.
* For digital TV stations in your area visit www.antennaweb.org
.
Version 8/21/2008 10 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
1.4
Right-Side Panel Connection
1. HDMI 3 - Connect the third source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the side of the TV indicates this connection.
2. HDMI 4 - Connect the fourth source for digital video such as a
DVD multimedia player or set top box through this all digital
2 connector. The white color band on the side of the TV indicates this connection.
1
Certified HDMI and HDMI-DVI cables are available for purchase from www.VIZIO.com
or by calling 888-
VIZIOCE (888-849-4623).
Version 8/21/2008 11 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
1.5
VIZIO Universal Remote Control
The VIZIO Universal Remote Control is a comprehensive remote that can be used to control up to four different components. The remote button functions are explained on the following pages.
Remote LED – Blinks when the remote operates.
This button starts all programming of the Remote Control.
Press this button to turn the TV on from the Turn-off mode.
Press it again to turn the TV off.
This button selects a programmed DVD player.
This button selects a programmed Audio Receiver/Amp/Home
Theatre System.
This button selects a programmed cable TV set-top box or a satellite
TV set-top box.
This button has been pre-programmed to select the codes to operate the VIZIO FHDTV.
Use these buttons to select a channel or enter a password.
This button allows the user to cycle through the inputs.
This DASH button is for the DTV mode. When selecting a digital channel directly use this button for the separation of main and subchannels. For example, channel 28-2 would be selected by the button sequence 2 8 DASH 2.
NOTE : This is a programmable remote supporting up to 4 devices (see DVD,
AUDIO, CABLE, TV buttons at the top of the remote). If the remote is not working with your VIZIO TV, press the TV button on the remote to set the functions back to TV.
Version 8/21/2008 12 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Use this button for the On-Screen Display (OSD) menus.
This button turns the image and system information display on and off.
Use the NaVigation Wheel to operate the On-Screen
Display (OSD) after it has been activated by pressing the
MENU button.
Use the OK button to select your chosen option in On-
Screen Display (OSD) menus.
GUIDE – This button displays program information. Note: this button is only functional for DTV.
EXIT – This button exits the On-Screen Display (OSD) menus.
VOL (+ or -) – These buttons turn the volume up or down.
LAST – This button recalls the previously viewed channel.
MUTE – This button turns the sound on and off.
CH (+ or -) – These buttons change the channels up or down.
Version 8/21/2008 13 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
When CABLE is selected and the code to match your Cable Box has been entered, this button will operate the Cable Box the same as this button on your Cable Remote. In TV mode, this button is used for the PIP/POP feature.
When CABLE is selected and the code to match your Cable Box has been entered, this button will operate the Cable Box the same as this button on your Cable Remote. In PIP mode, pressing this button once will display the next size of the sub-screen.
When CABLE is selected and the code to match your Cable Box has been entered, this button will operate the Cable Box the same as this button on your Cable Remote. If you have a Satellite Box and the code to match your Satellite Box has been entered, this button will operate the
Satellite Box the same as this button on your Satellite Remote. Using this button in the PIP feature will show the sources to be used as inputs for the second signal.
When CABLE is selected and the code to match your Cable Box has been entered, this button will operate the Cable Box the same as this button on your Cable Remote. If you have a Satellite Box instead and the code to match your Satellite Box has been entered, this button will operate the Satellite Box the same as this button on your Satellite Remote. If the subscreen input of the PIP feature is antenna or cable (no box) service, pressing this button will change the channel in the sub-screen.
Press this button to select TV programming.
Pressing this button will select between AV (S-Video) and AV
(Composite) inputs.
Pressing of this button will select Component input.
Repeated pressing of this button will switch between HDMI 1, HDMI
2, HDMI 3 and HDMI 4 inputs.
This button cycles through the available screen formats. The options are Standard, Full Screen, Crop and Panoramic. Note: in RGB/PC mode the options are 4:3 and 16:9.
This button also starts recording when using the remote to control your Cable/Satellite Box or VCR.
This button allows the user to select the sleep options by adjusting the timer in 30 minute increments up to 120 minutes. This button also pauses playback when using the remote to control your Cable/Satellite Box or VCR.
This button will select the MTS options of Stereo, SAP or Mono in standard TV mode and alternate audio channels, where available, in DTV mode. This button also starts Playback when using the remote to control your Cable/Satellite Box or VCR.
This button will select the Closed Caption mode. The options are OFF, CC1, CC2, CC3, and CC4.
If Digital Cable Service is the signal, the options are Service1 through Service6, depending on your local company. This button also Stops playback/recording when using the remote to control your
Cable/Satellite Box or VCR.
Press this button to change the picture mode from these options: Standard, Movie, Game, Sports and Custom.
Press this button to “Freeze-Frame” the current screen. Press this button again to continue playing. This button also skips to the previous chapter when using the remote to control your
Cable/Satellite Box or DVD Player.
Press this button to switch the audio from the main screen to the sub-screen while in PIP or POP mode.
While in PIP/POP mode; pressing SWAP will switch the displays from the main screen to the subscreen or vice versa.
Version 8/21/2008 14 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
1.5.1
Insertion of Batteries in the Remote Control
Insert two AA batteries into the remote control. Match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover.
Precautionary Tips for Inserting the Batteries:
Only use the specified AA batteries.
Do not mix new and old batteries. This may result in cracking or leakage that may pose a risk of fire or lead to personal injury.
Inserting the batteries incorrectly may also result in cracking or leakage that may pose a risk of fire or lead to personal injury.
Dispose of the batteries in accordance with local laws and regulations.
Keep the batteries away from children and pets.
1.5.2
Remote Control Range
Point the remote control at the remote control sensor to transmit the commands.
Do not place any obstacles between the remote control and the receiver window.
The effective range of the remote control is approximately 30 feet (10 meters) from the front of the receiver window, 30° to the left and right, 20° up and down.
1.5.3
VIZIO Universal Remote Control Precautions
The remote control should be kept dry and away from heat sources. Avoid humidity.
If the TV responds erratically to the remote control or does not respond at all, check the batteries. If the batteries are low or exhausted, replace them with fresh batteries.
When not using the remote control for a long period of time, remove the batteries.
Do not take the batteries apart, heat them, or throw them into a fire.
Do not subject the remote control to undue physical stress, such as striking or dropping it.
Do not attempt to clean the remote control with a volatile solvent.
Wipe it with a clean, damp cloth.
Version 8/21/2008 15 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Chapter 2 Connecting Equipment
2.1
Which Video Connection Should I Use?
The VIZIO VP505XVT1A has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays.
Connection
Quality
(type)
Connector
Rear/Side
Panel Color
Codes
Description
Best
(digital)
Best
(digital)
- - - - - - - - - - - -
Good
(analog)
Best
(analog)
Better
(analog)
Good
(analog)
White
Black
Blue
Green
Yellow, and
Red
HDMI (High-Definition Multimedia Interface) - It is the first and only industry-supported, uncompressed, all-digital audio/video interface.
HDMI provides an interface between any audio/video source, such as a set-top box, DVD player, or A/V receiver and an audio and/or video monitor, such as a digital television
(DTV), over a single cable.
DTV Coaxial RF. When used for MPEG2 encoded bit streams from ATSC broadcast programming, this input takes advantage of the
High Definition content.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - -
TV Coaxial RF. This is the connection for standard NTSC TV using antenna or cable.
RGB PC (VGA) – This video input has separate red, green and blue color components and separate horizontal and vertical sync signals.
This is most commonly used for PC input.
Component - The video signal is separated into three signals, one containing the black-andwhite information and the other two containing the color information. This enhancement over S-
Video takes advantage of the superior picture provided by progressive scan DVD players and
FHDTV formats.
Composite - The complete video signal is carried through this single pin connector. This is the most commonly used video connection.
S-Video - The video signal is separated into two signals, one containing the black-and-white information and the other containing the color information. Separating the color in this way avoids ‘cross color’ effects where closely spaced black and white lines are erroneously displayed in color. It also enables text to be displayed more sharply.
Note: For more info refer to the Quick Start Guide
Version 8/21/2008 16 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
2.2
Connecting Coaxial (RF)
2.2.1
Using Your Antenna or Digital Cable for DTV
1.
2.
3.
4.
Turn off the power to the FHDTV.
Connect the coaxial (RF) connector from your antenna or digital cable (out-of-the-wall, not from the Cable Box) to the DTV/TV
CABLE/ANTENNA connector on the rear of the FHDTV.
Turn on the power to the FHDTV.
Select DTV using the INPUT button on the remote or side of the
FHDTV, or directly by pressing the TV button on the Remote Control.
Note: a) Not all digital TV broadcasts are High Definition (HD). Refer to the program guides, or consult your cable, satellite or TV station operator. b) Digital broadcasts are not available in all areas. Refer to www.antennaweb.org
for detailed information. c) Make sure the antenna and coaxial cable are correctly grounded.
2.2.2
Using the Antenna or Cable through your VCR
1.
2.
3.
4.
Turn off the power to the FHDTV and VCR.
Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the rear of your VCR to the DTV/TV CABLE/ANTENNA connector at the rear of the FHDTV.
Turn on the power to the FHDTV and VCR.
Select TV using the INPUT button on the remote or side of the FHDTV, or directly by pressing the TV button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of your VCR.
Version 8/21/2008 17 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
2.3
Connecting Your HDTV Set-Top Box
2.3.1
Using HDMI Input
HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the
PLASMA FHDTV for optimal results.
Note: To maintain the display quality, use a VIZIO certified HDMI cable. Length is available up to 10 meters. See www.vizioce.com
or call 1-888-VIZIOCE (1-888-849-4623) for details.
Connecting your HDTV Set-Top Box (Best):
1.
2.
3.
4.
Turn off the power to the FHDTV and HDTV Set-Top Box.
Connect a HDMI cable to the HDMI output of your HDTV Set-Top Box and the other end to the HDMI Input (white color area) at the rear of the FHDTV.
Turn on the power to the FHDTV and HDTV Set-Top Box.
Select HDMI using the INPUT button on the remote or side of the FHDTV, or directly by pressing the HDMI button on the Remote Control.
Note: a) The HDMI input on the FHDTV supports High-bandwidth Digital Content Protection
(HDCP). HDCP encrypts the transmission between the video source and the digital display for added security and protection. b) Refer to your HDTV Set-Top Box user manual for more information about the video output requirements of the product or consult your cable or satellite operator.
Version 8/21/2008 18 www.VIZIO.com
For HDTV Set-Top Boxes with DVI:
VIZIO
®
VP505XVT1A User Manual
1.
2.
3.
4.
5.
Turn off the power to the FHDTV and HDTV Set-Top Box.
Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI 2 Input (white color area) at the rear of the FHDTV.
Using an audio cable (white and red connectors), connect the cable to the audio output connectors associated with the DVI output on your HDTV Set-Top Box and connect the other end to the audio connectors associated with the HDMI input (white area) at the rear of the
FHDTV.
Turn on the power to the FHDTV and HDTV Set-Top Box.
Select HDMI 2 using the INPUT button on the remote or side of the FHDTV, or directly by pressing the HDMI button on the Remote Control.
Note: a) b)
The HDMI input on the FHDTV supports High-bandwidth Digital Content Protection
(HDCP). HDCP encrypts the transmission between the video source and the digital display for added security and protection.
Refer to your HDTV Set-Top Box user manual for more information about the video output requirements of the product or consult your cable or satellite operator.
Version 8/21/2008 19 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
2.3.2
Using Component Video
Connecting your HDTV Set-Top Box (Better):
1.
2.
3.
4.
5.
6.
7.
Turn off the power to the FHDTV and HDTV Set-Top Box.
Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y
(green color) connector in the Component group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the FHDTV.
Connect the Pb (blue color) connector on your HDTV Set-Top Box to the corresponding Pb
(blue color) connector in the Component input (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the FHDTV.
Connect the Pr (red color) connector on your HDTV Set-Top Box to the corresponding Pr (red color) connector in the Component input (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the FHDTV.
Using an audio cable (white and red connectors), connect the cable to the audio output connectors associated with the Component output on your HDTV Set-Top Box and connect the other end to the audio connectors associated with the Component input (green color area) at the rear of the FHDTV.
Turn on the power to the FHDTV and HDTV Set-Top Box.
Select Component using the INPUT button on the remote or side of the FHDTV, or directly by pressing the Component button on the Remote Control.
Note: a) Refer to your HDTV Set-Top Box user manual for more information about the video output requirements of the product or consult your cable or satellite operator.
Version 8/21/2008 20 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
2.4
Connecting Your Basic Set-Top Box
2.4.1
Using Composite Video
1.
2.
3.
4.
5.
Turn off the power to the FHDTV and Set-Top Box.
Using the AV Cable, connect the Video (yellow color) connector on your Set-Top Box to the corresponding Video (yellow color) connector in the AV input (yellow color area) at the rear of the FHDTV.
Using the white and red connectors, connect the cable to the audio output connectors associated with the Video output on your Set-Top Box and connect the other end to the audio connectors associated with the AV input (yellow color area) at the rear of the FHDTV.
Turn on the power to the FHDTV and Set-Top Box.
Select AV using the INPUT button on the remote or side of the FHDTV, or directly by pressing the AV button on the Remote Control.
2.4.2
Using Coax (RF)
1.
2.
3.
4.
Turn off the power to the FHDTV and Set-Top Box.
Using a Coax (RF) cable, connect one end to the TV OUT (RF) on your Set
Top Box and the other end to the DTV/TV input at the rear of the FHDTV.
Turn on the power to the FHDTV and Set-Top Box.
Select TV using the INPUT button on the remote or side of the FHDTV, or directly by pressing the TV button on the Remote Control.
Note: Refer to your Set Top Box user manual for more information about selecting the video or RF output of the product.
Version 8/21/2008 21 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
2.5
Connecting Your DVD Player
You have several options for connecting your DVD player to your VP505XVT1A: HDMI, Component or
AV (S-Video or Composite) inputs. Based on your configuration, you can decide which option is right for you.
2.5.1
Using HDMI Input
DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the VIZIO VP505XVT1A for optimal results.
Note: To maintain the display quality, use a VIZIO certified HDMI cables. Length is available up to
10 meters. See www.VIZIOCE.com
or call 1-888-VIZIOCE (1-888-849-4623) for details.
Connecting your DVD Player (Best):
1.
2.
3.
4.
5.
Turn off the power to the FHDTV and DVD player.
Connect a HDMI cable to the HDMI output of your DVD player and the other end to the
HDMI1 Input (white color area) at the rear of the FHDTV.
Turn on the power to the FHDTV and DVD player.
Select HDMI1 using the INPUT button on the remote or side of the FHDTV, or directly by pressing the HDMI button on the Remote Control.
If HDMI1 is being used, connect to either HDMI 2 or HDMI 3 or HDMI 4 as the input and follow steps 1 through 3; and then select the corresponding HDMI input step 4.
Version 8/21/2008 22 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
For DVD Players with DVI:
1.
2.
3.
4.
5.
Turn off the FHDTV and DVD player.
Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI2 end to the
HDMI Input (white color area) at the rear of the FHDTV.
Connect an audio cable (white and red connectors) to the audio output connectors associated with the DVI output of the DVD player and connect the other end to the audio connectors by the HDMI input (white area) at the rear of the FHDTV.
Turn on the power to the FHDTV and your DVD player.
Select HDMI 2 using the INPUT button on the remote or side of the FHDTV, or directly by pressing the HDMI button on the Remote.
Note: Refer to your DVD player user manual for more information about the video output requirements of the product.
Version 8/21/2008 23 www.VIZIO.com
2.5.2
Using Component Video
Connecting your DVD Player (Better):
VIZIO
®
VP505XVT1A User Manual
1.
2.
3.
4.
5.
6.
7.
Turn off the power to the FHDTV and DVD player.
Connect the Y (green color) connector on your DVD player to the corresponding Y (green color) connector in the Component input (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the FHDTV.
Connect the Pb (blue color) connector on your DVD player to the corresponding Pb (blue color) connector in the Component input (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the FHDTV.
Connect the Pr (red color) connector on your DVD player to the corresponding Pr (red color) connector in the Component input (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the FHDTV.
Using an audio cable (white and red connectors), connect the cable to the audio output connectors associated with the Component output on your DVD player and connect the other end to the audio connectors associated with the Component input (green color area) at the rear of the FHDTV.
Turn on the power to the FHDTV and DVD player.
Select Component using the INPUT button on the remote or side of the FHDTV, or directly by pressing the Component button on the Remote Control.
Note:
Version 8/21/2008 a) Refer to your DVD player user manual for more information about the video output requirements of the product.
24 www.VIZIO.com
2.5.3
Using S-Video (AV/S-VIDEO)
Connecting your DVD Player (Good):
VIZIO
®
VP505XVT1A User Manual
1.
2.
3.
4.
5.
Turn off the power to the FHDTV and DVD player.
Connect the S-Video jack on the rear of your DVD player to the S-Video jack in the AV/S-
VIDEO input (yellow/red area) at the rear of the FHDTV.
Connect an audio cable (white and red connectors) to the audio output connectors associated with the S-Video output on your DVD player and connect the other end to the audio connectors associated with the AV input (yellow/red area) at the rear of the FHDTV.
Turn on the power to the FHDTV and DVD player.
Select AV using the INPUT button on the remote or side of the FHDTV, or directly by pressing the AV button on the Remote Control.
Version 8/21/2008 25 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
2.5.4
Using Composite (AV) Video Input
Connecting your DVD Player (Good):
1.
2.
3.
4.
5.
Turn off the power to the FHDTV and DVD player
Connect the Video (yellow color) connector on your DVD player to the Video (yellow color) connector in the AV/S-VIDEO input (yellow/red color area - row of connectors furthest from you when viewing from the rear of the FHDTV) at the rear of the FHDTV.
Connect the R (red color) and L (white color) audio connectors on your DVD player to the corresponding R (red color) and L (white color) audio input connectors in the AV input
(yellow/red color area - row of connectors furthest from you when viewing from the rear of the
TV) on the rear of the FHDTV.
Turn on the power to the FHDTV and DVD Player.
Select AV using the INPUT button on the remote or side of the FHDTV, or directly by pressing the AV button on the Remote Control.
Version 8/21/2008
Note: Refer to your DVD player user manual for more information about the video output requirements of the product.
26 www.VIZIO.com
Connecting Your VCR or Video Camera
VIZIO
®
VP505XVT1A User Manual
1.
2.
3.
4.
5.
Turn off the FHDTV and VCR or Video Camera.
Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack in the
AV input (yellow/red area) at the rear of the FHDTV.
Connect an audio cable (white and red connectors) cable to the audio output connectors associated with the S-Video output on your VCR or Video Camera and connect the other end to the audio connectors associated with the AV input (yellow/red area) at the rear of the
FHDTV.
Turn on the power to the FHDTV and VCR or Video Camera.
Select AV using the INPUT button on the remote or side of the FHDTV, or directly by pressing the AV button on the Remote Control.
Note: Refer to your VCR or Video Camera user manual for more information about the video output requirements of the product.
Version 8/21/2008 27 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
2.6
Connecting an external Receiver/Amp
1.
2.
3.
Turn off the power to the PLASMA
FHDTV and Receiver/Amp.
Using an audio cable (white and red connectors), connect the cable to the audio input connectors on the
Receiver/Amp and connect the other end to the ANALOG OUT (white area) audio connectors at the rear of the
PLASMA FHDTV.
Turn on the power to the PLASMA
FHDTV and Receiver/Amp. press MENU button on the remote control to open the On-Screen
Display (OSD) menu. either control to select the Audio Adjust menu. either control to select SPEAKERS.
7. Press either◄ or ► on the remote control to select option.
8. Press either ▼ or ▲to highlight the option OFF.
9. Press the OK key to accept the choice.
10. Press the EXIT key to go back to view the programming.
11. The sound (Audio) from the TV will now be routed through your Receiver/Amp stereo system.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Version 8/21/2008 28 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
2.6.1
Optical Output of Audio received
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO
OUT (white area) at the rear of the VP505XVT1A.
1.
2.
Turn off the power to the PLASMA FHDTV and Receiver/Amp.
Using a SPDIF cable, connect the cable to the audio input connector on the
Receiver/Amp and connect the other end to the OPTICAL OUT (white area) audio connectors at the rear of the PLASMA
FHDTV.
3. Turn on the power to the PLASMA
FHDTV and Receiver/Amp.
4. Then press the MENU button on the remote control to open the On-Screen
Display (OSD) menu. control to select the Audio Adjust menu. to select SPEAKERS. control to select option.
9. Press key to accept the choice.
10. Press EXIT key to go back to view the programming.
11. The sound (Audio) from the TV will now be routed through your Receiver/Amp stereo system.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Note: a) b)
Refer to your Receiver/Amp user manual to select the corresponding audio input.
The audio output is not amplified and cannot be connected directly to external speakers.
Version 8/21/2008 29 www.VIZIO.com
2.7
Connecting a PC (Computer)
VIZIO
®
VP505XVT1A User Manual
1.
2.
3.
4.
5.
Note: a)
Turn off the power to the FHDTV and PC (Computer).
Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your PC and the other end to the RGB PC input (blue area) at the rear of the FHDTV.
Connect the Audio Out on your pc computer to the RGB PC Audio input (blue area) at the rear of the FHDTV.
Turn on the FHDTV and PC Computer.
Select RGB using the INPUT button on the remote or side of the FHDTV. b) c)
For the best picture quality when connecting a pc computer through RGB
PC, set your pc computer timing mode to VESA 1920x1080 at 60Hz.
Please refer to the pc or graphic card’s user guide for additional information on how to set the timing mode and the video output requirements of the product.
A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at an electronics store.
If connecting a Laptop, please refer to the operating instructions for the device to enable the external display (the FHDTV).
Version 8/21/2008 30 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
2.7.1
Preset PC Resolutions
If connecting to a PC through the RGB input, set the TV timing mode to VESA 1920x1080 at 60Hz for best picture quality (refer to the graphic card’s user guide for instructions on how to set this timing mode). Please see the table below for the factory preset resolutions.
Resolution
640 x 480
640 x 480
640 x 480
720x400
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1920 x 1080
Refresh
Rate
(Hz)
75
60
70
75
60
60
72
75
70
56
60
72
Horizontal
Frequency
(KHz)
31.469
37.861
37.500
31.469
35.100
37.879
48.077
46.875
48.363
56.476
60.023
67.500
Vertical
Frequency
(Hz)
75.000
60.004
70.069
75.029
60.000
59.941
72.810
75.000
70.087
56.000
60.317
72.188
P
N
N
P
N
Horizontal
Sync
Polarity
(TTL)
N
N
N
N
P
P
P
P
N
N
P
P
Vertical
Sync
Polarity
(TTL)
Pixel Rate
(MHz)
N
N
25.175
31.500
N
P
P
31.500
28.322
36.000
P
P
40.000
50.000
49.500
65.000
75.000
78.750
148.500
NOTES: N = Negative, P = Positive,
Version 8/21/2008 31 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Chapter 3 Setting Up to Watch Television
For ‘Preparing Your PLASMA FHDTV for Wall Mounting’, see page 6.
3.1
Basic PLASMA FHDTV Start Up
1. Connecting the Power Cable
Connect the power cord to the power cord connector on the back of the FHDTV, and then plug the power cord into an AC wall socket.
2. Connect Audio and Video Cables to the FHDTV
(see Chapter 2 for detailed steps)
3. Turning Power On
Once all the components are connected, press the Power ON button on the side of the FHDTV, or press the Power ON (Red) button on the remote control.
VIZIO initial Setup Wizard will come on screen, displaying a Welcome message and giving you the first of six (6) screens with steps to follow to ready the TV for viewing your favorite programs and movies. Press the ▼ button to select the desired Setup Menu language (English, Espaňol or Français).
4. Initial Setup
After powering on the TV, the Initial Setup screen will come up. Press the ► button on the remote control to begin the process. a. The Language selection screen will be shown next. English being the default highlighted option. If you wish to change the OSD language to either Français or Español; press the ▼ button on the remote control to select your choice.
Press the ► button on the remote control to go to the next screen.
Note:
At this point, i f a Set-Top Box from your
Local Cable or Satellite Service Company or other equipment is being used, please press the EXIT key on the remote control and skip to Step 5. If this is not the case, please continue to Step b.
Version 8/21/2008 32 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual b. The Tuner screen will be displayed. The default choice is Antenna. If you are using Direct Cable (No Box) Service, press the ▼ button on the remote control to highlight CABLE.
Press the ► button on the remote to go to the next screen. c. The Channel Scan screen will be displayed.
The default choice is Scan.
Press the ► button on the remote control to commence the search for available channels to be stored into memory.
If you do not want to scan for channels at this time, press the ▼ button on the remote to highlight Skip Scan and then press the
► button.
Note: If you select Skip Scan, next time that you decide to complete this procedure, you will need to select the TV as input (through the Input key) and then go through the Menu option to select the Tuner setup to get the option of scanning the channels again. d. The screen will now change to show the progress of the search for Analog (NTSC) and Digital (ATSC) channels.
Note : DTV digital broadcast is not available in all areas. Refer to www.antennaweb.org
for information about availability in your area, type of antenna and in which direction to point your antenna. The channel availability through cable depends upon which channels your cable operator supplies in Clear QAM.
Consult your cable operator for more information.
Version 8/21/2008 33 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual e. When finished, the Complete screen will be displayed to inform you that the
FHDTV has completed the Initial Setup.
Press the EXIT key on the remote control to exit and begin watching TV.
5. Select Input Source
Select the Input Source for the FHDTV by pressing the INPUT button on the side of the TV or using the Input button on the remote control. To make a selection, press either ▼ or ▲ or CH+ or CH- to highlight the desired option from the following selections: TV, AV (S-VIDEO),
AV (Composite), Component, RGB, HDMI1, HDMI2, HDMI3 and HDMI4.
Follow the procedure below to display channels from a different signal
(External TV Tuner, VCR, Cable Box or Satellite Receiver) source, using
different inputs at the back of your TV set. b. If you have an HD service you must use the HDMI (best) or Component connection.
Note: Composite (AV) and S-Video Cables can only be used for SD (480i) pictures. a. Select the correct input connection - RF (DTV/TV) connector,
Composite (Yellow, Red and White) connectors, Component (Red,
Green, Blue plus Red and White) connectors, HDMI connectors or
Separate-Video (S-Video) plus Red and White connectors (if applicable).
Make the physical connection or hook up. c. Turn on your Cable Box, VCR, External TV Tuner or Satellite Receiver and you will see a picture on your TV set. If there is no picture, make sure you have selected the correct input on the
TV set. d. If the selected input is RF, you should be aware that the TV set needs to be on either channel
3 or channel 4 matching the channel which has been selected on the back of the VCR, Cable Box,
External TV Tuner or Satellite Receiver; please refer to Owner or User’s Manual of such equipment for details.
Note: The TV will be displaying any television station or program selected by the Cable Box, VCR,
External Tuner or Satellite Receiver. The TV will not be able to change programs or channels; this is controlled by the equipment sending the signal. If the service being used is the one which setup includes a box with two different outputs for two different (distant) rooms, then scanning channels would help you to find the signal. Be aware that the channel to be selected varies from provider to provider; meaning that, you may have to call your provider company so they could provide you with the specific channel when using a high definition TV. Some examples of these channels are: 105, 106, 115 and 116.
Version 8/21/2008 34 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
6. Fine Tuning your TV set for Home Use.
After completing Procedure 4 or Procedure 5, please follow the steps below to optimize your TV display: the key to bring up the Menu display.
Use the ▲ or ▼ button to highlight the Color
Temperature option.
b. Press ◄ or ► button to select it. c. Use the ◄ or ► button to scroll the choices Cool,
Normal, Warm and Custom. the or ▼ to Highlight Normal option. the button to select it.
f. Press MENU to go back to the main menu.
g. Press the ▲ or ▼ button to highlight the Picture Mode option. h. Press either ◄ or ► button to change the
Picture Mode option to Standard. i. Press the EXIT key to exit the on screen display Menu.
Note
: If Initial Setup Procedure 4 had been done, ensure that the correct program times are shown when pressing the Guide key.
Select a digital channel, e.g. 28-1.
Press the MENU key, this will bring up the Picture Adjust menu.
Press either ◄ or ► button scroll across to the icon showing the tower antenna.
Press either ▲ or ▼ to highlight DTV Tuner Setup.
Press either ◄ or ► button or the OK key to select it. The next screen will appear showing Time Zone as an option.
Press either ◄ or ► to highlight the corresponding time zone.
Press either ▲ or ▼ button to switch to your local area Time
Zone.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the OSD completely.
Your new TV set is now ready to automatically reproduce the best picture quality for the input signal being sent. Enjoy your TV watching!!
Version 8/21/2008 35 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
3.2
ATV/DTV Tuner Setup
If you did not use the VIZIO’s Initial Wizard Setup to tune your channels, and have decided to use the TV tuner, Perform the following steps.
Press the MENU key on the remote control. The OSD screen will display.
Press either ◄ or ►to scroll across the top icons to the antenna tower icon.
Press either ▼ or ▲ on the remote control to highlight the
Tuner Mode option.
Use the ◄ or ► button to select the type of signal input: Cable
(no box) Service or Antenna.
Press either ▼ or ▲ button to highlight choice.
Press OK key to select choice
The following screens will be displayed.
Auto Search
Press either ▼ or ▲ button to highlight this option.
Press either ◄ or ► button to select it.
The TV will automatically search for Analog and Digital channels. The time required depends on how many stations the tuner encounters. The first scanned channel will show up in the background while the word “Finished” will be displayed
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the OSD completely.
Version 8/21/2008 36 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Skip Channel
After the TV has stored all of the available DTV channels in memory you will find that some channels will be too weak to watch comfortably or they may be channels you do not wish to see.
To skip channels, please perform the following steps:
Press the MENU key to return Tuner Mode screen.
Press ▼ or ▲ button to highlight Skip Channel
Press ►button to review the Skip Channel table.
Press ▼ or ▲ button to scroll down or up through the table.
Press the OK key to select or deselect channel after it has been highlighted. The selected channel will be skipped when using the CH+ or CH- button. You will still be able to select this channel using the number buttons on the remote control.
Press EXIT to return to the viewing program or to exit the OSD menu.
Version 8/21/2008 37 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
3.3
Watching a TV Program
Before watching TV, please make sure that any cable, satellite or off-air antenna connections are secure.
Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector.
1. Press the power button on the remote or on the side of the FHDTV. The VIZIO logo on the front will change from orange to white.
2. There are 3 options for selecting your programming: a. If you are using an antenna or cable connected through the DTV/TV CABLE/ANTENNA input, you can select TV directly by pressing the TV button on the remote, or by pressing the INPUT button on the remote or on the side of the FHDTV. b. If you are watching broadcasts through a cable or satellite set-top box connected by an
HDMI cable, select HDMI directly by pressing the HDMI button on the remote, or by pressing the INPUT button on the remote or on the side of the FHDTV. c. If you are watching broadcasts through a cable or satellite set-top box connected by a
Component (YPbPr) cable, select Component directly by pressing the Component button on the remote, or by pressing the INPUT button on the remote or on the side of the
FHDTV.
Note: If you do not see a picture, make sure that all of the
FHDTV connections are secure and you have selected the correct video input source.
3. When using option 2a, press the Channel buttons on the remote or the CH +/- buttons on the side of the FHDTV to change the channel. Note: The Channel buttons, on the side of the
FHDTV and on the remote control will not work if you are watching a program using HDMI,
Component, AV-S (S-Video) and AV-C (Composite) inputs.
Version 8/21/2008 38 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
3.4
Adjusting Basic FHDTV Settings
Volume
To adjust the volume, press and hold the
VOL+ or VOL- button on the side of the
PLASMA FHDTV or remote control until the desired level is reached.
TV Channels
To step up or down through the available TV channels, press the CH+ or CH- button on the side of the FHDTV or remote control once for the next or previous channel, or hold it depressed until the desired channel is reached.
Note: Channel up and down will only operate in DTV and TV modes, and only after channels have been scanned.
Wide
Using this feature, you can watch video content in different size modes on the FHDTV.
Press the MENU button on the remote control to bring up the OSD screen.
Press either the ◄ or ► button to select
Screen Adjust options menu.
Press the ▼ button to scroll down to Wide and select it using the OK button
Press either the ◄ or ► button to select among the modes.
For more information, see Understanding Viewing Features - Viewing Modes, on page 60.
Version 8/21/2008 39 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
3.5
Program Information
Press the GUIDE button once on the remote and program information for the channel you are watching will be displayed on the screen.
Press the ◄ or ► button to scroll the previous or next channel. Each time you pause at a channel, the program list will update with the program schedule for the channel and the window will show the live program for that channel. Press the GUIDE button to exit this feature.
3.6
Information on FHDTV Status
When you change TV channels or inputs, or press the GUIDE button on the remote, an Information
Banner is displayed for a few seconds to tell you the status of the TV.
Program Information:
Provided by Broadcaster
Audio is English
Stereo
TV Channel
Number
Station Name: provided by Broadcaster
Program
Rating
Closed Caption is available
Version 8/21/2008
1080i HDTV (High Definition TV)
40 www.VIZIO.com
Source is
Antenna
VIZIO
®
VP505XVT1A User Manual
Chapter 4 Advanced Adjustment of FHDTV
The remote control or the control buttons on the right hand side of the TV can control all the function settings. The On Screen Display (OSD) allows you to adjust and save the values for contrast, brightness and other settings. The TV will save changes made to the settings, even if the TV is turned off.
4.1
Using the On Screen Display (OSD)
The OSD consists of several menu options: Picture Adjust,
Screen Adjust, Audio Adjust, TV Tuner Setup, Special Features and Parental Control. The main menu options may vary depending on your selected input source.
Note: Some of the main menu options may have additional submenus, i.e. the TV Rating submenu for Parental Controls.
Press the MENU button on the remote control or the side of the
TV and the Picture Adjust menu will be shown on the screen.
Press the ◄ or ► button on the remote control or the VOL + or VOL – button on the side and scroll across the main menus at the top of the OSD screen.
Picture Screen Audio TV Special Parental
Adjust Adjust Adjust Tuner Setup Features Control
Press the ▲ or ▼ button on the remote control or the CH + or CH – button on the side of the TV to highlight the option or feature to be adjusted or set up within the selected menu.
Press either ◄ or ► button on the remote control or the VOL + or VOL – button on the side of the
FHDTV to select the option.
If a variable value applies to the option or feature, a slide bar will show. Press ◄ or ► / VOL + or VOL – button to adjust to the desired value.
Press the EXIT key to exit the menu screen when finished.
If a set (Off/On) value applies, press ◄ or ► button to switch to the desired position or setting.
Press the OK key to accept the setting and then the EXIT key to exit the menu screen.
NOTE:
In general, o nce the adjustments are completed, press the MENU button repeatedly or the EXIT once to exit the OSD completely.
Version 8/21/2008 41 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
4.2
TV Inputs Picture Adjustment
In general, the following features and options apply to every input on the TV, with the exception where the
Ø symbol is shown to imply that the option is not available to such input or signal being displayed.
When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page.
Picture Adjustments are available to set to your preferred settings
4.2.1
Picture Mode
Press the ▲ or ▼ button to highlight the Picture Mode selection.
Use the ◄ or ► button to scroll through the options, and select from Custom, Standard, Movie, Game and Sports.
Press the OK key to accept the desired mode.
Once the adjustments are completed press either the MENU or EXIT button repeatedly to exit the OSD completely.
4.2.2
Brightness
Press the ▲ or ▼ button to highlight the Brightness adjustment.
Press the ◄ or ► button to select it and make adjustments.
The menu page will disappear and be replaced by a small Brightness Indicator Bar so you can see the brightness level between minimum and maximum.
The Brightness adjusts the black levels in the picture. If the brightness is too low you will not be able to see the detail in darker parts of the picture and if the brightness is too high the picture will look washed out.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Version 8/21/2008 42 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
4.2.3
Contrast
Press the ▲ or ▼ button to highlight the Contrast adjustment.
Press the ◄ or ► button to select it and make adjustments.
The menu page will disappear and be replaced by a small Contrast Indicator Bar so you can see the contrast level between minimum and maximum.
The Contrast adjusts the white levels in the picture. If the contrast is too low the picture will look washed out and if the contrast is too high you will not be able to see any detail in the bright parts of a picture.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
4.2.4
Color
Press the ▲ or ▼ button to highlight the Color adjustment.
Press the ◄ or ► button to select it and make adjustments.
The menu page will disappear and be replaced by a small Color Indicator Bar so you can see the color level between minimum and maximum.
The Color adjusts the amount of color in the picture.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Version 8/21/2008 43 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
4.2.5
Tint
Press the ▲ or ▼ button to highlight the Tint adjustment.
Press the ◄ or ► button to select it and make adjustments.
The menu page will disappear and be replaced by a small Tint Indicator Bar so you can see the tint adjustment to the left or right of the nominal position.
The Tint adjusts the hue of the picture. The easiest way to set tint is to look at flesh tones and adjust for a realistic appearance. In most cases, the default middle position is correct. If people’s faces look too orange try reducing the level of color.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
4.2.6
Sharpness
Press the ▲ or ▼ button to highlight the Sharpness adjustment.
Press the ◄ or ► button to select it and make adjustments.
The menu page will disappear and be replaced by a small
Sharpness Indicator Bar so you can see the sharpness level between minimum and maximum.
Use the ◄ or ► button to adjust the level.
The Sharpness adjusts the sharpness of the picture.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Version 8/21/2008 44 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
4.2.7
Color Temperature
Press the ▲ or ▼ button to highlight the Color Temperature adjustment.
Press the ◄ or ► button to select it. The default is Cool. This is
9300K setting.
Press the ◄ or ► button to choose Cool, Normal, Warm or
Custom option.
If you choose the Custom option, then the primary colors Red,
Green and Blue can be adjusted to set a custom white point.
Press the ▼ button to highlight the color you wish to adjust.
Press the ► button to start adjusting the color and the menu page will disappear and be replaced by a small Color (Red,
Green or Blue) Indicator Bar as before.
Use the ◄ or ► button to adjust the color.
Press the MENU button when finished. Repeat the procedure to adjust the other colors if desired.
4.2.8
Advanced Video Features
Press the ▲ or ▼ button to highlight the Advanced Video feature.
Press the ◄ or ► button to select it.
A new menu will be displayed showing the advanced functions available for fine tuning of the picture.
Noise Reduction (NR) - Temporal
Press the ▼ button to highlight Noise Reduction (NR) - Temporal. Use this feature to diminish grain-like picture noise. Press the ◄ or ► button to choose from the Off, Low, Medium or Strong setting.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Noise Reduction (NR) – MPEG
Press the ▼ button to highlight Noise Reduction (NR) - MPEG. Use this feature to diminish picture noise caused by the digitizing of image motion content that may be present in the picture.
Press the ◄ or ► button to choose from the Off, Low, Medium or Strong setting.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Version 8/21/2008 45 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Film Mode
This feature helps to optimize the different formats to which the movies had been recorded, improving your movie viewing experience.
Press the ◄ or ► button to choose Auto, Video or Film.
CTI (Color Transient Intensity)
Press the button to highlight CTI. This feature can be to reduce the time taken to transition from one color to another. The effect will be seen as sharpening the border between colors.
Press the ◄ or ► button to choose from Off, Low and Strong options.
Flesh Tone
Press the ▼ button to highlight Flesh Tone. Use this feature to increase the reproduction performance of the picture.
Press the ◄ or ► button to select Off or On.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Adaptive Luma
Press the ▼ button to highlight Adaptive Luma. Large areas of darkness in a picture will result in a lower
Average Picture Level (APL) and the overall picture will look too dark. Activation of this feature will raise the APL to counteract this effect.
Press the ◄ or ► button to select Off or On.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
4.2.9
Reset Picture Mode
Press the ▲ or ▼ button to highlight the Reset Picture Mode feature.
Press the ◄ or ► button to select it.
Press the ▲ or ▼ button to return on Picture settings to factory default.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Note : Only settings under the picture adjustment menu will be reset.
Version 8/21/2008 46 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
4.3
TV Input Display (Screen) Adjustments
In general, these features or options apply to every input in the TV, with the exception where the Ø symbol is shown to indicate that there is not availability of such function or feature to the signal or input being displayed.
Press the MENU key on the remote control and the main OSD screen will be shown.
Press either the ◄ or ► button to scroll across the top icons to the one showing a black and white picture of a TV. When highlighted, the next screen will show the menu of the screen adjustments which apply to the signal or input being used. A sample of a screen is shown below.
4.3.1
Auto Adjust
Press the ▲ or ▼ button to highlight the Auto Adjust option.
Press the ◄ or ► button to select it.
Press the OK key on the remote control to activate the option.
The display (screen) will make the necessary adjustments to display or accommodate the signal being input to the best attainable fit.
This option is mainly used in the computer (RGB or VGA) signal input.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the OSD completely.
NOTE:
To become familiar with these options and features, compare the appearance of the various OSD screens against the descriptions, keeping in mind that any icon or option showing the Ø symbol does not apply to the input being used or signal being viewed .
Version 8/21/2008 47 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
4.3.2
Wide Mode
The Wide option allows you to select how the display fits the screen. When in TV mode, the selections are Standard, Full
Screen, Crop and Panoramic views.
Press the ▲ or ▼ button to highlight the Wide Mode feature.
Press the ◄ or ► button to select it.
Press the ▲ or ▼ button to make the desired selection. You will see the screen adjust to the different sizes described previously.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the OSD completely.
4.3.3
Horizontal Position
Press the ▲ or ▼ button to highlight the Horizontal Position option.
Press the ◄ or ► button to select it.
Press the ◄ or ► button to adjust the horizontal position of the picture.
This option is applicable mainly to signals feed through component input.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the OSD completely.
4.3.4
Vertical Position
Press the ▲ or ▼ button to highlight the Vertical Position option.
Press the ◄ or ► button to select it.
Use the ◄ or ► button to adjust the vertical position.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the OSD completely.
4.3.5
Clock
This feature adjusts the pixel rate to minimize vertical (white vertical bands) on the right hand side of picture. Press the or ▲ or ▼ button to highlight the Clock option.
Press the ◄ or ► button to select it.
Press the ◄ or ► button to start adjusting this option. This option applies to VGA connections.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Version 8/21/2008 48 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
4.3.6
Phase
Press the ▲ or ▼ button to highlight the Phase option.
Press the ◄ or ► button to select it.
Press the ◄ or ► button to adjust this feature.
The TV will automatically look for the phase of the signal to fine tune the picture.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the OSD completely.
4.3.7
Overscan
The Overscan option is a feature which allows expanding a picture to reduce or eliminate the black bars of the picture.
Press the ▲ or ▼ button to highlight the Overscan option.
Press the ◄ or ► button to select it.
Press the ▲ or ▼ button to adjust this feature.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
NOTE:
To become familiar with these options and features, compare the appearance of the various OSD screens against the descriptions, keeping in mind that any icon or option showing the Ø symbol does not apply to the input being used or signal being viewed.
Version 8/21/2008 49 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
4.4
TV Inputs Audio Adjustment
When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page.
Press the ◄ or ► button to scroll across the main menu icons to the icon representing a speaker.
Press the ▲ or ▼ button to highlight the option you wish to adjust.
4.4.1
Volume
Press the ▲ or ▼ button to highlight the Volume option.
Press the ◄ or ► button to select it and adjust the volume to the desired level.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
4.4.2
Bass
Press the ▲ or ▼ button to highlight the Bass option.
Press the ◄ or ► button to select it and adjust the bass or deep tone to your preferences.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the OSD completely.
Version 8/21/2008 50 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
4.4.3
Treble
Press the ▲ or ▼ button to highlight the Treble option.
Press the ◄ or ► button to select it and adjust the high or acute tone to your preferences.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely
4.4.4
Balance
Press the ▲ or ▼ button to highlight the Balance option.
Press the ◄ or ► button to select it and adjust the balance. The menu page will disappear and be replaced by a small Balance Indicator Bar, as before, so you can see the balance adjustment to the left or right of the nominal position.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
4.4.5
SRS TruSurround HD (SRS TSHD)
To experience a clear and crisp sound out of the built-in speakers.
Press the ▲ or ▼ button to highlight the SRS TruSurround HD
(SRS TSHD) feature.
Press the ◄ or ► button to select it.
Press the ▲ or ▼ button to select the simulated surround sound feature to be On or Off.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the OSD completely.
4.4.6
Speakers
Press the ▲ or ▼ button to highlight the Speakers option.
Press the ◄ or ► button to select it.
Press the ▲ or ▼ button to turn the internal speakers On or Off. You may want to turn off the internal speakers when listening to the audio through your Home Theatre System.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Version 8/21/2008 51 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Chapter 5 SPECIAL FEATURES
Your TV comes with built-in features which accommodate the requirements to make your viewing enjoyable and a good experience. These features apply globally to the different inputs of this TV, the exceptions being those noted or marked with Ø within the OSD menu.
5.1.1
MTS
This feature allows you, the user to select the different languages in which the signal provider or broadcaster is transmitting the audio with the program you are watching. This signal is usually or in most cases Spanish language. Repeatedly press the MTS key in the remote control to go through the different selections, and depending on the type of the signal; Analog or Digital, your choices are as following:
1. Analog Signal: the choices are Stereo, Mono or SAP.
2. Digital Signal: the choices are usually English Stereo or Any Other Language (Spanish,
Vietnamese, Korean, etc) Stereo. In this case the TV will display the banner showing the information provided by the channel broadcaster.
5.2
Special Features Adjustments
When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press either ◄ or ► button to scroll across the main menu icons to the one showing the remote control in hand icon and the Special Features screen will be displayed.
5.2.1
Language
Press the ▲ or ▼ button to highlight the Language option.
Press the ◄ or ► button to select it. The default is English.
Press the ▲ or ▼ button to select Español or Français.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the OSD completely.
5.2.2
Sleep Timer
Press the ▲ or ▼ button to highlight the Sleep Timer feature.
Press the ◄ or ► button to select it.
Press the ▲ or ▼ button to select the timer to turn-off the TV in 30, 60, 90 or 120 minutes.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the OSD completely.
5.2.3
Analog CC (Closed Caption)
Press the ▲ or ▼ button to highlight the CC (Closed Caption) selection.
Press the ◄ or ► button. A separate menu will appear with the following CC settings
When watching regular analog (NTSC) TV, the CC feature is available in the Setup menu.
Press the ▲ or ▼ button to highlight the CC selection.
Press the ◄ or ► button to select Off, CC1, CC2, CC3 or CC4.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Version 8/21/2008 52 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Closed Caption for regular TV is commonly CC1 or CC2.
5.2.4
Digital Closed Caption Style
When watching DTV, the Digital CC Style feature is available in the Setup menu.
Press the ▼ button to highlight the Digital Closed Caption option.
Press the ► button to go to the next screen.
Press either ▲or▼ button to select between the different options Off, Service 1, Service 2, Service 3, Service 4, Service
5 and Service 6.
If any of the Service is selected; the Digital Caption Style can then be selected. Press the MENU key to go back to previous option.
Press either ▲or▼ to select Digital Caption Style.
Press the ► button to choose this option. The next display will show Caption Style.
Press the ► button to highlight this feature.
Press either ▲or▼ button to toggle between the two options:
As Broadcaster and Custom.
If Custom is selected, you will be able to customize the way
Closed Caption will be displayed by changing the following parameters: Font Size (letters size), Font Color (letter color)
Font Opacity (transparency of the letters), Background
Color (color of the background area where Closed Caption is displayed), Background Opacity (Transparent or solid screen), Window Color (Color of the area where characters will be displayed) and finally Window Opacity (allows the area of the characters to be changed). Any or all of these may be set to your personal preference.
Use the following steps to set these parameters:
Press the MENU key to go back to a highlighted Caption
Style.
Press either ▲or▼ to select the chosen parameter, i.e. Font Size.
Press the ► button to highlight the value, i.e. Large.
Press either ▲or ▼ button to change this value.
Press the MENU key to return to the previous screen. Repeat these steps to set up every parameter to preferred value.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Note:
When the Ø symbol shows in the menu display, it indicates that such a feature or option is not applicable to the current signal input.
Version 8/21/2008 53 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
5.2.5
PIP (Picture-in-Picture)
Before this feature can be activated; it requires that Parental Control, Parental Lock Enable option to be set to Off, if not a message asking to check the Parental Control feature will appear on the screen.
Press the ▲ or ▼ button to highlight the PIP option.
Press the ◄ or ► button to select it.
Press the ▲ or ▼ button. A separate menu will appear with the following PIP settings.
PIP Style
Press the ▼ button to highlight the PIP Style selection.
Press the ◄ or ► button to select Off, PIP or POP(Pictureoutside picture). In the PIP mode a smaller sub screen will be displayed on top of the main screen. For the POP mode the main screen and sub screen will be of equal size and be positioned side by side.
Alternatively, you can press the PIP button on the remote to change the PIP mode.
PIP Input
When PIP or POP is selected,
Press the ▼ button to highlight the PIP input selection.
Press the ◄ or ► button to choose the input source for the sub screen. The input sources available will vary according to which input is used for the main screen; see the table below to find which inputs can PIP/POP with each other.
See below for detailed information regarding the PIP sources.
PIP Size
When PIP is selected, Press the ▼ button to highlight the PIP size selection.
Press the ◄ or ► button to choose Small, Medium or Large.
PIP Position
When PIP is selected, Press the ▼ button to highlight the PIP position selection.
Press the ◄ or ► button to choose where on the picture you want the PIP screen positioned over the main screen.
Main Input
If PIP feature is being used, the Main Input will display which type of input is being viewed in the main screen.
Note:
When the Ø symbol shows in the menu display, it indicates that such a feature or option is not applicable to the current signal input.
Version 8/21/2008 54 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
5.2.6
Image Cleaner
This feature may allow ghosts of previous images to be removed.
Press the ▲ or ▼ button to highlight the Image Cleaner feature.
Press the ◄ or ► button to select it.
Press the ◄ or ► button to toggle between OK and Cancel.
Press the OK key to accept your selection.
Pressing any key on the remote control will stop this process, the TV will go back to program being viewed.
It usually takes 60 or more minutes for this feature to run a full cycle.
Note: Prolonged display of stationary images (such as on a video game or a computer or a still picture) will cause them to remain on the screen. Higher brightness and contrast levels will make the panel more susceptible to image retention. To minimize image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Image Cleaner will not remove images that have been displayed for too long. Image sticking is not covered under standard warranty.
5.2.7
Reset All Settings
Press the ▲ or ▼ button to highlight the Reset All Settings option.
Press the ◄ or ► button to select it.
Press the ▲ or ▼ button to reset the TV to the default factory settings.
Press the ◄ or ► button to toggle between OK and Cancel.
Press the OK key to accept your selection.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Note: This does NOT reset the Parental Control Password.
Note:
When the Ø symbol shows in the menu display, it indicates that such a feature or option is not applicable to the current signal input.
Version 8/21/2008 55 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
5.3
Parental Control
The parental control is a feature which allows the TV viewer to set limitations for viewing channels and movies according to the nature and contents of the programs being received.
5.3.1
DTV / TV Input Parental Control
If you want to restrict certain channel and program viewing, you can do this by turning on the Parental Control. Selected programs, movies and channels can then be made available only after an authorized password has been entered and accepted by the TV.
When the MENU button is pressed, the On Screen Display
(OSD) appears on the PICTURE adjustment page.
Press the ◄ or ► button to scroll across to the icon showing the two figures picture.
Press the ▲ or ▼ button to highlight the different options under
Parental Control menu.
The Password must be entered before the TV will continue with Parental settings. The default password set in the factory is 0 0 0 0. If you are going to use the Parental Control feature you should change the password.
5.3.2
Parental Lock Enable
Press the ▲ or ▼ button to highlight the Parental Lock Enable option.
Press the ◄ or ► button to select it.
Press the ▲ or ▼ button to switch between Off and On options.
The next screen will display
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the OSD completely.
Note: Make sure you write down and store the new password in a secure place.
The Reset All Settings feature (see page 55) does NOT reset the password.
Version 8/21/2008 56 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Note:
When the Ø symbol shows in the menu display, it indicates that such a feature or option is not applicable to the current signal input.
5.3.3
Digital TV Parental Control
As required by the FCC, the TV comes with the built-in solution to scan for ratings updates for parental control within the different regions of the United States and it is done automatically when the parental control feature is activated. This process is done only if updates are available in your area.
1. Press either the ◄ or ► button to scroll across display to the icon showing the figure of two persons.
2. Enter code to activate this feature.
3. Press the ▼ key to select Parental Lock Enable.
4. Press the ► button to activate this option.
5. The next screen will display two options in the menu.
Update DTV Rating
If an update has been issued in your area, this option will be highlighted to indicate availability.
Press ► key to activate this option to perform an update.
Press OK key to update according to the table shown.
After the update is completed press the MENU button repeatedly or the EXIT once to exit the OSD completely.
Channel Block
Press the ▼ button to highlight the Channel Block selection.
Press the ► button to go to the next screen.
Press the ▼ button to highlight the channel you want to block.
Press the OK button to block or unblock the highlighted channel.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the
OSD completely.
Version 8/21/2008 57 www.VIZIO.com
5.3.4
TV Rating
Follow the procedure in the previous section to display the
Parental Control menu and then press the ▼ button to highlight the US TV Rating selection.
Press the MENU button and the Block TV Rating panel will be displayed.
In the Block TV Rating panel you can customize the program blocking of the following TV ratings:
Y – All children
Y7 – Older children
G – General audience
PG – Guidance suggested
14 – Strongly cautioned
MA – Mature audience
You can also customize the TV ratings for the following content:
A – All subratings
D – Sexual dialog
L – Adult language
S – Sexual situations
V - Violence
FV – Fantasy violence
Press the ▲ or ▼ button to navigate through the TV rating options.
Press the OK button to block (locked) or allow (unlocked).
5.3.5
Movie Rating
Press the ▼ button to highlight the US Movie Rating selection.
Press the ► button and the Block Movie Rating panel will be displayed.
In the Block Movie Rating panel you can customize the program blocking of the following Movie ratings:
G – General audience
PG – Parental guidance suggested
PG-13 – Recommended for children 13 years of age or older
R – Mature audience
NC-17 – No one under 17 years of age
X – No one under 17 years of age
Press the ▲ or ▼ button to navigate through the Movie rating options.
Press the OK button to block (locked) or allow (unlocked).
Version 8/21/2008 58 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
5.3.6
Blocked Unrated Programming
Follow the procedure in the previous section 5.2.1 to display the
Parental Control menu and then press the ▼ button to highlight the Block Unrated TV selection.
Press the OK button to turn on or turn off the blocking of programming that does not have a rating.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the OSD completely.
5.3.7
Access Code Edit
Press the ▼ button to highlight the Access Code Edit selection.
Press the ► button and the new Password panel will be displayed.
Enter the new 4-digit password using the number buttons on the remote. Enter it a second time to confirm you entered it correctly.
Once the adjustments are completed press the MENU button repeatedly or the EXIT once to exit the OSD completely.
VIZIO
®
VP505XVT1A User Manual
Version 8/21/2008 59 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
5.4
Understanding Viewing Features
Your FHDTV features the following viewing modes. You can switch viewing modes using the remote control, please follow the instructions in page 39.
5.4.1
Viewing Modes
Standard Mode
The original 4:3 aspect ratio (1.33:1 source) is preserved, so black bars are added to the left and right of the display image. Standard TV broadcasts are displayed with a 4:3 Aspect Ratio. Movies in 4:3 Aspect Ratio may be referred to as pan-and-scan or full frame. These movies were originally filmed in 16:9
(widescreen), and then modified to fit a traditional TV screen (4:3). This works also with 16:9 enhanced DVD formats.
Full Screen Mode
When watching a standard broadcast or full-frame movie in this mode, the display image is stretched proportionately to fill the TV screen. When watching a standard definition 4:3 source the picture will stretch horizontally and fill the screen; people will look fatter than they are.
When watching a widescreen (1.78:1 source) program or movie, the display image fills the TV screen. If you are watching a widescreen
(1.85:1 or 2.35:1 source) program or movie, there will still be black bars at the top and bottom.
Crop Mode
The crop mode allows cropping a 14:9 or 16:9 widescreen program or movie from 4:3 broadcasting and rescaled it to a full screen on a 16:9 capable TV; this mode stretches the display vertically leaving a reduced size of the black bars on top and bottom of the image. This makes some formats of DVD viewable in a wide screen display.
Panoramic Mode
When watching a standard broadcast or full frame movie in this mode, the 4:3 Aspect Ratio (1.33:1 source) display image is stretched horizontally on the left and right sides to fill the TV screen. The center of the image is not stretched.
Version 8/21/2008 60 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Chapter 6 Picture-In-Picture (PIP) Mode
Your TV features PIP mode so you can watch two pictures at the same time. When PIP is turned on, you can display two pictures at one time. One picture is displayed as the full screen (main screen) and the other picture is displayed in a small window (sub screen). The sub-screen can be set to small, medium or large.
6.1
PIP Mode Adjustments
See below for detailed information regarding the PIP sources.
SUB
MAIN
TV
AV
Component
HDMI 1
HDMI 2
HDMI 3
HDMI 4
RGB
TV
9
9
9
9
AV
9
9
9
9
Component HDMI1 HDMI2 HDMI3 HDMI4 RGB
9
9
9
9
9
9
9
9
“ 9 ” – Indicates which inputs are available for PIP and POP modes.
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
6.1.1
Adjusting Basic PIP Settings
The PIP channel is independent of the main TV channel. To change the PIP channel, press the PIP CH button on the remote control. Alternatively, you can change the PIP channel by pressing the CH+ or CH- button.
Repeated pressing of the PIP button will turn on, turn off the PIP mode.
Press the PIP SIZE button to alternate between Small, Medium and Large PIP sizes.
Repeated pressing of the PIP INPUT button will cycle through the inputs for PIP. This button has no effect when PIP is off.
You can swap the program that is in the main picture with the program in the PIP subpicture. To swap the main picture, press the SWAP button. Press a second time to return the programs to their original screens.
Version 8/21/2008 61 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
6.2
Programming the VIZIO Universal Remote Control
You can program the remote control to work with up to four different pieces of equipment including your
VIZIO VP505XVT1A FHDTV. Listed below are the steps for programming your Audio Tuner Amplifier,
Cable Box and DVD Player.
6.2.1
Programming for Audio Tuner Amplifier
1. Manually turn on the Amplifier.
2. Press the AUDIO button on the remote control.
3. Press and hold the SET button until the LED LIGHT flashes twice.
4. Find the programming code for your Audio Tuner Amplifier in the code list in the back of this book and enter it using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and manufacturer.
5. Point the remote control at the Audio Tuner Amplifier and press the POWER button. The Amplifier will turn off.
Note: a) b)
If your Amplifier does not respond, try all the codes for your Tuner Amplifier brand. If the codes do not work, or your brand is not listed, see “Searching for Component Codes.”
Sometimes a code listed will only include limited functions. Try other codes that may include more functionality.
6.2.2
Programming for Cable Set-Top Box
1. Manually turn on the Cable Box.
2. Press the CABLE button on the remote control.
3. Press and hold the SET button until the LED LIGHT flashes twice.
4. Find the programming code for your Cable Box in the code list in the back of this book and enter it using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and manufacturer .
5. Point the remote control at the Cable Box and press the POWER button. The Cable Box will turn off.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and manufacturer.
Note: a) b)
If your Cable Set-Top Box does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, see “Searching for Component Codes.”
Sometimes a code listed will only include limited functions. Try other codes that may include more functionality.
Version 8/21/2008 62 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
6.2.3
Programming for DVD Player
1. Manually turn on the DVD Player.
2. Press the DVD button on the remote control.
3. Press and hold the SET button until the LED LIGHT flashes twice.
4. Find the programming code for your DVD player in the code list in the back of this book and enter it using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and manufacturer.
5. Point the remote control at the DVD Player and press the POWER button. The DVD Player will turn off.
Note: a) b)
If your DVD player does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, see “Searching for Component Codes.”
Sometimes a code listed will only include limited functions. Try other codes that may include more functionality.
6.2.4
Searching for Component Codes
If you cannot find the manufacturer in the component list or the program code does not work, you can use the remote control to search for the correct component code.
To search for a component code:
1. Turn on the component.
2.
3.
Press the matching component button on the remote control.
Press and hold the SET button until the LED flashes twice.
4.
5.
Press 9 9 1. The LED flashes twice.
Point the remote control at the component and then alternate between pressing the POWER button and the component button on the remote control until the component turns off.
If the component still does not respond, clear the component button, then repeat the search procedure.
6.3
Using a Cable or Satellite Remote
Your VIZIO remote uses codes 11758 and 10178 to work your PLASMA FHDTV. To use a cable or satellite remote to work the TV, refer to your cable or satellite remote user guide for more information on how to program the remote. If your cable or satellite remote uses a 5-digit code (like most Direct TV units), first try 11758 and then, if that does not work, 10178. If your cable or satellite remote uses a 4digit code, try 1758 and then 0178 as an alternative. If your cable or satellite remote uses a 3-digit code
(Echostar or Dish Network for example), use code 627.
Note : Some buttons may not function as expected on your cable or satellite remote. Typically power, volume and mute will work.
Version 8/21/2008 63 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Chapter 7 Maintenance and Troubleshooting
7.1
Maintenance
Important
1.
2.
Make sure that the power cable is removed from the socket before cleaning the TV.
Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such chemicals may damage the housing, screen glass and remote control, and cause paint to peel.
Cleaning the Housing and Remote Control
1.
2.
Use a soft cloth for cleaning.
If the housing or remote control is seriously contaminated, use a soft cloth moistened with diluted neutral cleaner to clean the display. Wring water out of the cloth before cleaning to prevent water from penetrating into the housing. Wipe the display with a dry cloth after cleaning.
Cleaning the Screen
1.
2.
Use a soft cotton cloth to gently clean the screen.
The screen glass is very fragile. Do not scrape it with any sharp object. Do not press or tap the screen to avoid cracking. When the screen is seriously contaminated, use a soft cloth moistened with diluted neutral cleaner to clean the display. Wring water out of the cloth before cleaning to prevent water from penetrating into the housing. Wipe the display with a dry cloth after cleaning.
7.2
Troubleshooting Guide
If the TV fails or the performance changes dramatically, check the display in accordance with the following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the display still fails to perform as expected, contact the VIZIO for assistance by calling 1-877-MYVIZIO (698-
4946) or e-mail us at
[email protected]
.
Problem
No power.
No sound.
Solution
Make sure the power button is ON (White VIZIO Logo).
Make sure AC power cord is securely connected to the AC socket.
Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage.
Check your audio connection
Press MUTE on the remote control again, so that MUTE disappears from the screen
Check your audio settings, your TV audio may be set to SAP, min or speakers off
Press the Volume + (Up) key on your remote control
Make sure that headphones are not connected
If the screen is black. Check your input connections.
Power is ON but no screen Make sure the video cable supplied with the TV is secured to the correct video
Version 8/21/2008 64 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Problem image.
Solution output port on the back of the source device. Make sure any cable attached to the
TV is secured to the correct output your Set-Top Box, DVD, etc.
Adjust brightness and contrast.
Check Source settings.
Wrong or abnormal colors appear.
If any colors (red, green, or blue) are missing, check the video cable to make sure it is securely connected.
Control buttons do not work. Press only one button at a time.
Remote Control does not work.
Make sure batteries are inserted correctly
Batteries could be weak.
Make sure you have selected TV on the remote.
There appear to be image quality issues.
For best image quality, view HD wide screen programs where possible. If HD content is not available view “Standard Definition” from a digital source. Standard, analog TV will always be noticeably inferior to HD because your digital flat panel TV has video that is many times better than old TV’s and so you can see interference and deficiencies you did not know you had.
You cannot see a picture. Make sure that the power cord is plugged into a grounded electrical outlet.
Make sure that the power button is turned on.
Make sure that the selected input source is connected to a working input source.
If your TV is connected to your computer in RGB or HDMI mode, press any key on your keyboard to “wake” your computer.
You see a distorted picture or hear unusual sound.
You may be getting interference from electrical appliances, cars, motorcycles, or fluorescent lights. If you have not mounted it on the wall, try moving your TV to another location to see if this is the cause of the problem.
The picture has abnormal patterns.
Make sure that the input source cable is attached securely and correctly to the back of your TV.
Make sure that the video input source is within the range of your TV. Compare the video input source’s specifications with your TV specifications.
The display image does not cover the entire screen.
If you are using RGB mode, make sure that H Size and V Position in the On Screen
Display (OSD) are set correctly.
If you are using TV, AV-C (Composite), AV-S (S-Video) or Component with 480i input, follow instructions in page 48 to obtain the desired screen mode.
You can see a picture but you cannot hear sound.
Make sure that the volume is not turned down.
Make sure that the sound is not muted.
Make sure that your audio input source cables are connected securely and correctly.
The TV has pixels that are always dark or colored.
Your PLASMA FHDTV is manufactured using an extremely high level of precision technology, however, sometimes some pixels of your PLASMA FHDTV may not display. Pixel defects within industry specifications are inherent to this type of product and do not constitute a defective product.
You see “noise” or “trash” on the screen.
When your PLASMA FHDTV’s digital capabilities exceed a digital broadcast signal, the signal is up-converted (increased) to match your TV’s display capabilities. Upconverting can cause noise or trash.
You switch to a different input and the volume changes.
You switch to a different input and the screen size changes.
The TV remembers the volume level from the last time you adjusted it. If the sound level is higher or lower from another source, then the loudness will change.
The TV remembers the viewing mode from the last time you used a particular input
(AV (S-Video), AV (Composite), Component, HDMI and TV).
Tips for High-Definition Users. The PLASMA FHDTV is an ideal platform for viewing High Definition Content.
Best Image Quality will be achieved by the HDMI Input, then YPbPr, then RGB.
Version 8/21/2008 65 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Problem Solution
However, due to variances in broadcast practices, it is possible some image distortions can occur.
Tips for Letterbox Content
Users.
Letterboxed (or “Widescreen”) versions of DVD movies are most commonly formatted for standard 4:3 Televisions. The PLASMA FHDTV has the capability of expanding this content so the entire screen is filled at the expense of image accuracy. Follow the instructions in page 38.
7.3
Telephone & Technical Support
Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem over the phone. For more information on warranty service or repair, after the warranty period, please contact our Support Department at the number below.
Customer support and quality service are integral parts of VIZIO’s commitment to service excellence.
For technical assistance contact our VIZIO Technical Support Department via email or phone.
E-mail: [email protected]
Tel: (877) 698-4946 Fax: (949) 585-9563
Hours of operations:
6:00am – 9:00pm PST Monday – Friday
8:00am – 4:00pm PST Saturday – Sunday
Please have your VIZIO model number, serial number and date of purchase available before you call.
VIZIO
39 Tesla
Irvine, CA 92618, USA
Tel: (949) 428-2525 Fax: (949) 585-9514
Web:
www.VIZIO.com
Version 8/21/2008 66 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
7.4
Compliance
Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area.
Japan Electric Appliance Control Act
7.5
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1.
2.
3.
4.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Notice:
1.
2.
3.
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.
Version 8/21/2008 67 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Chapter 8 Miscellaneous Information
8.1
Specifications
Specifications
Panel 50” Diagonal, 16:9 Aspect Ratio
Resolution
Pixel (Dot) Pitch
1920 x 1080
0.576 mm (H) x 0.576 mm (V)
Display Compatibility 1080p (FHDTV)
Inputs 1 x Co-axial RF (ATSC/QAM/NTSC), 4 x HDMI TM (v1.3) with HDCP (plus 1 x Stereo Audio RCA for DVI source), 1 x Component YPbPr plus Stereo Audio, 1 x RGB PC plus Stereo Audio, 1 x
S-Video (AV) plus Stereo Audio, 1 x Composite Video (AV)
1x SPDIF Optical Digital Audio, 1x Analog Stereo Audio Outputs
Features ATSC/Clear QAM tuner, NTSC video decoding via RF or composite video, 3:2 or 2:2 reverse pull-down, Motion adaptive de-interlace, Progressive video scan via component video/VGA/HDMI, FHDTV via HDMI or component video, FHDTV via HDMI or component video, Color temperature adjustments of 5400K/6500K/9300K, Independent Red/Green/Blue adjustments for color temperature fine tuning, Signal Compatibility 480i (SDTV), 480P (EDTV),
720P (HDTV), 1080i (HDTV), 1080P (FHDTV), Computer support at
640x480/800x600/1024x768/1920x1080 via VGA/HDMI, HQV video quality, Audio SRS TSHD.
Built-in, 10Wx2 Speakers
50,000 hours to half the original brightness
Speakers
Panel Life
Power
Input
Voltage Range
IEC Connector for direct power line connection
100-240Vac at 50/60Hz
Power Consumption 600W, <1W standby
Environmental Conditions
Operating Temperature: 0°C~35°C, Relative Humidity: 20~80%, Altitude: 0~14,000 ft
Non-Operating
Dimensions
Temperature: -20°C~50°C, Relative Humidity: 10~90%, Altitude: 0~40,000 ft
48.57"W x 32.42"H x 10.23"D (1233.80mm x 823.40mm x 259.80mm) with stand;
48.57”W x 30.44"H x 3.71"D (1233.80mm x 773.10mm x 94.20mm) without stand
Net Weight
Gross Weight
Certifications
95.90lbs (43.50kg) with stand, 88.63lbs (40.20kg) without stand
111.60lbs (50.60kg)
CSA/CSA-US, FCC Class B
*Product specifications may change without notice or obligation.
Version 8/21/2008 68 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
8.2
Glossary – Standard Definitions
Analog TV: Today’s TV system using radio frequency waves to transmit and display pictures and sound.
Aspect Ratio (4x3): Traditional TV “aspect ratio”, that is, the screen’s width as compared to its height.
For example, a “32 inch TV screen” would be 25 inches wide and 19 inches tall.
Aspect Ratio (16x9): “Wide screen TV” aspect ratio which is more like a movie screen than a traditional
TV. For example, a “32 inch TV screen” would be 28 inches wide and 16 inches tall.
Digital TV (DTV): Television delivered and displayed using radio frequency waves that contain information that is digitally encoded for improved quality and efficiency.
Enhanced Definition TV (EDTV): A better digital television transmission than SDTV with at least 480P, in a 16x9 or 4x3 display and Dolby digital surround sound. 480P is the quality used by most DVD players.
EDTV provides 300-400,000 pixels.
HDTV Monitor (sometimes called HDTV Ready): A set that can display HDTV programming if you have a separate HDTV tuner, HD Cable Set-Top Box or HD Satellite Set-Top-Box Receiver.
HDTV Tuner (also decoder, receiver, set-top box): A device capable of receiving and outputting HDTV signals for display. It may be stand-alone or integrated in the set.
High-Definition Television (HDTV): The best quality picture, wide screen (16x9) display with at least
720 progressively scanned lines (720P) or 1080 interlaced lines (1080i) and Dolby digital surround sound.
HDTV provides 900,000-2.1 million pixels.
Integrated HDTV: An HDTV that has the digital tuner built into the set. It does not need a separate settop box to receive over-the-air DTV signals.
Interlace Scan: A way to scan vertical lines onto a TV picture by scanning all the odd lines first, then filling the in the even lines (this happens instantaneously).
Plug-and-Play or Digital Cable Ready: A DTV or other device for digital cable consumers that plugs directly into the cable jack and does not require a separate set-top box. Plug-and-Play TV owners must obtain a CableCARD from their cable company in order to view scrambled programming services.
Progressive Scan: A way to scan vertical lines onto a TV picture by scanning all the lines consecutively
(progressively).
Standard Definition TV (SDTV): Basic digital television transmission that may be displayed with fewer than 480 progressively scanned lines (480P) in 16 x 9 or 4 x 3 format. 480 interlaced (480i) is the quality of today’s analog TV system.
Source: Buying a Digital Television, CEA, FHDTV Guide, 2005
Note : The Federal Communications Commission (FCC), the Consumer Electronics Association (CEA) and the Consumer Electronics Retailers Coalition (CERC) have made a new tip sheet available for digital television (DTV) retailers to reproduce and distribute to consumers on the sales floor. The file may be downloaded online at www.dtv.gov
. While you’re there, check out the other useful information in the FCC is making available to consumers interested in learning more about the analog to digital transition.
Version 8/21/2008 69 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
8.3
Index
A
Accessories, 4, 5
Adjustments
Closed Caption, 14
Selecting the Screen Size, 14, 60
Stepping through TV Channels, 39
Volume, 64
Advanced Video Features
Color Temperature (Color Temperature, 45
CTI (Color Transient Improvement, 46
DNR (Dynamic Noise Reduction, 45
C
Cleaning your VIZIO TV, 64
Coax (RF)
Connecting for DTV, 17
Component
Connecting your DVD Player, 24
Connecting your HDTV Set-Top Box, 20
Composite (AV)
Connecting your Basic Set-Top Box, 21
Connecting your DVD Player, 25
Controls
Front Panel, 9
Side Panel, 9
D
Disassembling, 6
DTV
Audio Adjustment, 50
Parental Control, 56
Picture Adjustment, 42
DTV Audio Adjust
Balance, 51
Speakers, 51
DTV Picture Adjust
Advanced Video, 45
Brightness, 42
Color, 43
Contrast, 43
Reset Picture Mode, 46
Sharpness, 44
Tint, 44
DTV Special Features
Digital Closed Caption, 53
Language, 52
PIP, 54
Reset, 55
Sleep Timer, 52
DTV Tuner Setup
MTS, 52
Skip Channel, 37
DVI
Connecting your DVD Player, 24
Connecting your HDTV Set-Top Box, 20
Version 8/21/2008 70 www.VIZIO.com
G
Glossary, 69
H
HDMI
Connecting your DVD Player, 23
Connecting your HDTV Set-Top Box, 19
I
Inputs
Antenna, 3
Connectors, 16
Rear Label, 10
Installation
Base removal, 6
Preparation, 5
Safetey Strap, 5
Wall Mounting, 5, 6
O
OSD
Brightness Adjustment, 42
Closed Caption Selection, 52
Color Adjustment, 43
Outputs
Using 5.1 Surround with a Home Theatre System, 29
P
Parental Control
Block Unrated Programming, 59
Movie Rating, 58
TV Rating, 58
PC Resolutions, 31
PIP and POP Inputs, 61
R
Remote, 15
Batteries, 15
Layout, 15
Range, 15
Remote Control
Codes for other devices., 72
Programming to work your DVD Player, 63
Programming to work your Set-Top Box, 62
Using your Cable or Satellite Remote to Operate your
RGB
VIZIO TV, 63
Connecting your PC, 30
S
Screen Size explanation, 60
S-Video
Connecting your DVD Player, 25
Connecting your VCR, 27
Connecting your Video Camera, 27
T
Technical Specifications, 68
Troubleshooting Guide, 64
TV
Audio Adjustment, 50
Parental Control, 56
Picture Adjustment, 42, 47
TV Picture Adjust
Advanced Video, 45
Brightness, 42
Color, 43
Contrast, 43
Reset Picture Mode, 46
Version 8/21/2008 71 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Sharpness, 44
Tint, 44
TV Special Features
Closed Caption, 52
Language, 52
PIP, 54
Reset, 55
Sleep Timer, 52
TV Tuner Setup
MTS, 52
Skip Channel, 37
W
Watching TV
Basic Adjustments, 39
Basic connections, 32
First Startup, 32
Getting your Programs, 38
Program Information, 40
Status Information, 40
VIZIO
®
VP505XVT1A User Manual
8.4
Component Program Codes
Setup Code for VCR’s Setup Code for VCR’s Setup Code for VCR’s
20000, 20278,
20046
Cineral 20278
ABS 21972
20081
20184, 20240,
20045, 20121,
20043, 20209,
20002, 20278,
20479, 10236,
11928, 11929
20060, 20039,
20047, 20104,
20020, 20062
20000
Adyson 20072
Aiko 20278
20000, 20124,
20307
20240, 20000,
20209, 20278,
20479, 21278
Classic 20037
20045, 20278
20039, 20000,
20046
20240, 20072,
20271
20000
20000,
20072, 20278,
20593, 21593
Garrard 20000
Gateway 21972
20278
Alienware 21972
20000, 20149
Allegro 20039
America Action
American High
20278, 10180
20035, 20081
Amoisonic 20479
Curtis Mathes 20060, 20035,
20162, 11919,
20240, 20000,
20041, 20278,
20432, 20760,
21035
20240, 20048,
20000, 20149,
20202, 20760
Gemini 20060
General 20045
Anam National
20240, 20278
20162
Asha 20240
Cybernex 20240
CyberPower 21972
10180, 20038
20020, 20278,
20046, 20561,
21278
Beaumark 20240
Bell & Howell 20035, 20048,
20039, 20000,
20104, 20046,
20479
20020
Dell 21972
Go Video
20278
20432, 20240,
20526, 20614
20000, 20278,
20209, 20038,
20225, 21237
20000, 20072,
20278, 20020,
20062
20209, 20002,
20208, 20479,
11929, 21479
Calix 20037
DirecTV 20739
Dual 20000 Grundig 20081
Harley Davidson 20000
Haojie 20240
Canon 20035
20062
Carrera 20240
20240, 20000,
20043, 20209,
20061
Electrophonic 20037
Carver 20081
Emerex 20032
Harvard 20072
Harwood 20072
Headquarter 20046
Hewlett Packard 21972
Version 8/21/2008 72 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for VCR’s
20000
Setup Code for VCR’s
20593, 21278
Setup Code for VCR’s
20045, 20000,
20042, 20041,
20089, 20105,
21037
20048, 20039,
20081, 20240,
20000, 20149
Magnin 20240
Howard
Computers
21972
HP 21972
Marta 20037
Hughes Network
Systems
20042, 20739
20038, 20062
Nishi 20240
Niveus Media 21972
Newave 20037
Noblex 20240
Northgate 21972
Olympus 20035
Humax 20739
Hush 21972
20072
Media Center PC
20081, 21162
21972
MEI 20035
20162, 20037,
20048, 20047,
20240, 20000,
20104, 20062,
20432, 20593,
21048, 21162,
21262 iBUYPOWER 21972
ITT Nokia 20240, 20041
Janeil 21972
20037, 20048,
20039, 20047,
20240, 20104,
20209, 20479,
20000, 20072,
20278, 20062,
20046, 20307,
20479
Optonica 20062
20000, 20104,
20121, 20209,
20002, 20278
Panama 20035
20008, 20061,
21162
20041, 20046
Metz 20037
20060, 20061
20162, 20000,
20020, 20225,
20614, 20616,
21035, 21162,
21262
MGN Technology 20240
KLH 20072
Microsoft 21972
20037, 20047,
Midland 20240 20081, 20240,
Kolin 20043
20000, 20042
Mind 21972
KTV 20000
Minolta 20042,
Pentax 20042,
20105
20105
20042, 20209,
20038, 20240,
21037
Linksys 21972
20072, 20038,
20208
Loewe 20081
20000
20042, 20067
20047, 20000,
20042, 20067,
20043, 20041,
20061, 20807
20081, 20000,
20209
Movie Walker 20072
20048, 20081,
20045, 20000,
20209, 20062,
20616, 20618,
20739, 21081,
21181
20072
Pilot 20037
MTX 20000
20081,
20042, 20067
20039
Polk Audio 20081
Lumatron 20278
M Electronic 20240
New Tech
20048, 20104,
20067, 20038
20072
Presidian 21593
Profitronic 20240
20000, 20072,
20278, 20020,
20760, 21060
Version 8/21/2008 73 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for VCR’s Setup Code for VCR’s
20008
Setup Code for VCR’s
Protech 20072
Pulsar 20039
Pulser 20240
Quarter 20046
Qisheng 20060
20002, 21035,
21162
20121, 20043,
20208
20162, 20037,
20048, 20039,
20047, 20033,
20045, 20000,
20042, 20104,
20067, 20043,
20209, 20041
20000, 20067
20041
20037, 20000
20048, 20038
Radio Shack
20046
20035, 20162,
20037, 20048,
20047, 20240,
20000, 20104,
20046, 20062,
21037, 21162
20032, 20000,
20062, 20807,
20848
20208, 20240,
20000
Radix 20037
Shogun 20240
Randex 20037
RCA 20060,
Signature 20060,
20035,
20037, 20048,
20048, 20240,
20000, 20149,
20045, 20000, 20046, 20479
20042, 20149,
20105, 20106,
20202, 20760, 20072
20807, 20880,
21035, 21060
Sonic Blue 20616, 20614
Sonographe 20046
20037, 20048,
20047, 20104,
20240, 20000,
20121, 20278,
20046, 20062,
21162
20032, 20033,
20000, 20067,
20046, 20636,
21032, 21232,
21972
Soundmaster 20000
Ricavision 21972
Runco 20039
Stack 9 21972
20000
Telecorder 20240
Tevion 20479
20202
Tisonic 20278
21503, 20739
20208
TNIX 20037
Tocom 20240
20042, 20000,
20043, 20209,
20041, 20062,
20845, 21008,
21145, 21972,
21996
Tosonic 20278
20045, 20000,
20038, 20432,
20739, 21014
Samtron 20240
Version 8/21/2008
20067, 20209,
20041, 20072,
20002, 20271,
20479, 21479
20104, 20000,
20046, 20159,
20479
SVA 20000
20278,
20020
Unitech 20240
20043, 20000,
20593, 21593,
21781
Vector 20045
Vector Research 20038, 20184
Vextra 20072 20002, 20593,
21593
Systemax 21972
Tagar Systems 21972 Video Concepts
20008
20045, 20061
Videomagic 20037
Tashiko 20037
20072
74 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for VCR’s Setup Code for Cable
Converters
Viewsonic 21972
Cool Box 00883
Villain 20000
Coolmax 00883
Voodoo 21972
Daeryung 01877,
20035,
00477, 00008
20037, 20048,
20047, 20081,
20033, 20240,
Digeo 01187
Digi 00637 20042, 20072,
20045, 20000,
20043, 20041,
20038, 20149
Director 00476
Dumont 00637
Wharfedale 20593
DX Antenna 01500
White
Westinghouse
20209, 20000,
20072, 20278,
20479
Emerson 00014
Fosgate 00276
20479
20240, 20000,
20208
Fujitsu 01497 Prism 00012
GE 00144 Pulsar 00000
Gehua 00476 Quasar 00000
General
Instrument
00476, 00810,
00276, 00003,
00014, 00012
Setup Code for Cable
Converters
00237, 00008
00107, 0144,
01488
Panther 00637
00525
00144, 00533,
01500
RadioShack 00883
RCA 01256
ZT Group
20033, 20000,
20209, 20041,
20278, 20479,
21139, 21479
21972
Setup Code for Cable
Converters
Gibralter 00003
GMI 00883
Runco 00000
GoldStar 00144
00273
01877, 00877,
00477, 00237,
00008, 00009
00003, 00000,
00008, 00012,
00017, 01510
Jebsee 00014
Sprucer 00144
00014, 00237,
00017
00017
Acorn 00023
Action 00023
Active 00023
Americast 00899
Amino 01822
Archer 00237
BCC 00276
Bell & Howell 00014
Bell South 00899
British Telecom 00003
Clearmaster 00883
ClearMax 00883
00276, 00003,
00012, 00014
Stargate 00014
KNC 00008
Storm 00637
LG 00144
Sumitomo 01500
Memorex 00000
Supercable 00276
Supermax 00883
00810, 00276,
01187, 01254,
00014, 01106
Tocom 00012
Torx 00003
Multitech 00883
MultiVision 00012
Myrio 01822
NEC 01496
Nova Vision 00008
Oak 00017
Trans PX 00276
Tristar 00883
TS 00003
United Cable
US Electronics
00276, 00003,
00014
00276, 00003,
00008, 00017
Version 8/21/2008 75 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for Cable
Converters
Setup Code for Satellite
Receivers
Setup Code for Satellite
Receivers
V2 00883 HTS 00775
Viewmaster 00883
Vision 00883
Vortex View 00883
Hughes Network
Systems
01142, 00749,
01749, 01442,
01443, 01444
Humax 01790
Star Choice
Star Trak
01639, 01524
00869
00772, 00869
00899, 00017
Setup Code for Satellite
Receivers
Aiwa 01514
AlphaStar 00772
Bell ExpressVu 00775
Chaparral 00216
Crossdigital 01109
Innova 00099
Jerrold 00869
01507, 01775
Maspro 01530
McIntosh 00869
Memorex 00724
01443, 01444
00790, 00819,
01285, 01501,
01530
Ultrasat 01806
US Digital 01535
USDTV 01535
Voom 00869
Dish Network
System
DX Antenna
00566, 00639,
01639, 01142,
00247, 00749,
01749, 00724,
00819, 01856,
01076, 01108,
00099, 01109,
01392, 01414,
01442, 01443,
01444, 01609,
01640
Motorola 00869
Netsat 00099
Next Level 00869
Optimus 00724
01508
01505, 01005,
00775, 01170,
01775
01505, 01775
01530
01749, 00724,
00775, 00819,
01076, 00722,
00099, 01442
00775, Pioneer 01142,
01505, 01170,
01775
Primestar 00869
Setup Code for DVD Players
3D Lab 20503, 20539
Acoustic
Solutions
20730
Advent 21016
Afreey 20698
20705,
20695,
20899, 21089
Fortec Star 01821
Funai 01377
General
Instrument
00869
Goodmans 01246
Hisense 01535
01250, 00749
Houston 00775
Proton 01535
Alco 20790
00566
Allegro 20869
20872
00855, 00143,
01392, 01442,
00775, 01142
Sanyo 01219
Sharp 01489
Works
AMW 20872
01109, Apex Digital
01108, 01142,
01377, 01442,
01609
20533,
20672,
20717,
20755,
20794,
20796,
20797,
20830,
Version 8/21/2008 76 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for DVD Players Setup Code for DVD Players Setup Code for DVD Players
21004,
21020,
21056,
21061, 21100
21172,
21234, 21242
Dansai 20770
Insignia 21268
IRT 20783
Arrgo 21023
Daytek 20872
JBL 20702
Aspire Digital 21168, 21407
Decca 20770
Jensen 21016
Audiovox 20717,
20790,
21041,
21071,
21072,
21121, 21122
DVD2000 20521
Emerson 20591,
20675,
20821, 21268
JMB 20695
JVC 20558,
20623,
20867, 21164
Kawasaki 20790
Awa 20730 Enterprise 20591
Kenwood 20490,
20539
20534
Blaupunkt 20717
Blue Parade 20571
Enzer 20770
KLH 20717,
21020,
21149, 20790
Blue Sky 20695 Firstline 20651
Kloss 20533
Bose 21895
Brandt 20651 Funai 20675,
21268, 21334
Lasonic 20798
Byd;sign 20872
California Audio labs
20490
20717, 20815
Celestial 21020
Cinea 20831
Go Video 20573,
20744,
20717,
20715,
20714,
20783,
20833,
CineVision 20869
20869,
21044,
21075,
Clairtone 20571
21099,
21158,
Coby 21086,
20778,
21304, 21730
GoldStar 20741,
21107, 21177 20801, 20869
Craig 20831
Goodmans 20790
Lenoxx 21533
Liquid Video
20869,
20801, 20741
21980
Lite-On 21158,
21058,
21416, 21440
Logix 20783
Magnavox 20503,
20539,
21976,
21914,
20675,
20646,
20821, 21268
Curtis Mathes 21087
CyberHome 20816,
20874,
21023,
21024,
21117,
21129, 21502
Cytron 20705
Daewoo 20784,
20705,
20770,
20833,
20869,
21169,
Greenhill 20717
McIntosh 21533
Hitachi 20573,
20664,
21919,
21247, 21764
Medion 20651
Memorex 20695,
20831, 21270
Hiteker 20672
Humax 21588
Initial 20717
Marantz 20539,
20503, 20675
Minato 20752
Version 8/21/2008 77 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for DVD Players Setup Code for DVD Players Setup Code for DVD Players
Mitsubishi 21521,
20521, 21403
20571,
20717,
Sylvania 20675,
20821, 21268
Momitsu 21082
Mustek 20730
20741
Naiko 20770
20822,
20790,
21022, 21132
Realistic 20571
Reoc 20752
Symphonic 20675,
20821,
21268, 21334
Tatung 20770
Teac 20717,
Rio 20869
21984,
20809, 20790
Nesa 20717
Rotel 20623
Technics 20490
NexxTech 21402
Saba 20651
Technika 20770
Norcent 21003
Technosonic 20730
Onkyo 20503,
20627,
21924, 20792
Optimus 20571
Palsonic 20672
Panasonic 20503,
20490,
20571,
20703,
21362,
21462,
21490,
21632, 21762
Philips 20503,
20539,
20646,
21914,
20675,
20854,
21260, 2167,
21354
Samsung 20490,
20573,
21932,
21075,
20820,
20744,
20899, 21044
Tevion 20651
Theta Digital 20571
Sansui 20695
Sanyo 20695,
20670,
20675,
20873, 21334
Toshiba 20503,
20573,
20539,
20695,
21045,
21154,
21503,
21588, 21639
Schneider 20783
Tredex 20800
Schwaiger 20752
Unimax 20770
Sensory Science 21158
Sharp 20630,
20752,
20675,
21256, 21642
United 20730
Universum 20591
Urban Concepts 20503, 20539
Sharper Image 21117
US Logic 20839
PianoDisc 21024
Pioneer 20525,
20571, 20631
Shinco 20717
V 20123,
20124,
21064, 21226
Venturer 20790
Polaroid 21086,
21061, 21020 Slim Art 20784 Victor 21597
Polk Audio 20539 SM Electronic 20730
Portland 20770
Prima 21016
Proceed 20672
Proscan 20522
ProVision 20778
Qwestar 20651
Radionette 20741
RadioShack 20571
Sonic Blue 20573,
20715,
20783,
20869, 21099
Xbox 20522
Yamaha 20490,
20539, 20545
Sony 20533,
Yamakawa 20872
21533,
20864,
Zenith 20503,
21033,
21070, 21431
20591,
20741, 20869
Sova 21122
Zeus 20784
Zoece 21265
Superscan 20821
RCA 20522,
Version 8/21/2008 78 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for CD Players Setup Code for CD Players Setup Code for CD Players
Acoustic
Research
30420 Marantz 30626,
30029,
RCA 31062,
30032,
Admiral 30305
30157,
30038,
30420,
30179,
Aiwa 30157
Arcam 30157
Audio Research 30157
30180, 30435 30053,
30305,
McIntosh 30256,
30420, 30468
30290, 30660
MCS 30029
Realistic 30420,
30179,
Burmester 30420
Miro 30000
30180,
Cairn 30157
30305,
California Audio
Labs
30029
Mission 30157
Modulaire 30000,
30468,
30000,
30032, 30087
Cambridge 30157
30032,
30037, Revox 30157
Soundworks 30087,
30179,
Roksan 30435
Curtis Mathes 30032
30180,
30305,
30393, SAE 30157
Denon 30873
30420, 30468
DKK 30000
MTC 30420
Sansui 30157,
30000, 30305
DMX Electronics 30157
NSM 30157 Sanyo 30179,
30000, 30087
Dynamic Bass 30179
SAST 30157
Emerson 30305
Funai 30305
Optimus 31063,
30000,
30032,
30037,
30420,
30179,
31075, 30145
Scott 30305
Sharp 30861,
30037,
30034, 30180
Grundig 30157
Hafler 30173
Panasonic 30029,
30303,
30388, 30752
Parasound 30420
Sherwood 30180
Sonic Frontiers 30157
Hitachi 30032
Integra 30101
Jerrold 30003
Penney 30029
Philips 30626,
30157, 30274
Sony 30490,
30000,
30100,
31364, 30185
Pioneer 31063,
31062,
30032,
31087,
30305, 30468
Soundesign 30145
Sugden 30157
Sylvania 30157
Kenwood 30826,
30626,
30028,
30037,
30036, 30190
Polk Audio 30157
Proceed 30420
Proton 30157
TAG McLaren 30157
Tandy 30032
31372,
31373, 31711
Krell 30157
Quad 30157
Quasar 30029
Linn 30157 RadioShack 30000,
30032,
Magnavox 30157,
30179,
30038,
30274, 30305
30180,
30420, 30468
Teac 30420,
30393,
30490,
30180, 30378
Techwood 30303
Thule Audio 30157
Version 8/21/2008 79 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for CD Players Setup Code for Video
Accessories
Victor 30072
Wards 30157,
30053,
30032,
30087, 30179
Motorola 01363
MyHD 01383
Niveus Media 01272
Setup Code for Audio
Accessories
Marantz 31491
Motorola 31464
NaviPod 31644
Yamaha 30888,
30036,
30490, 31292
Northgate 01272
Panasonic 01120
Yorx 30000
Pinnacle Systems 01268
Zonda 30157
Pioneer 01010
Netgear 31785
Omnifi 31605
Onkyo 31789
Roku 31828
Russound 32019
Setup Code for Video
Accessories
RadioShack 00160
Ricavision 01272
Slim Devices 31844
Sonance 31917
ABS 01272
Roku 01486 SSI 31522
Accurian 01653
Alienware 01272
Allegro 00160
Archer 00160
Bantor 00160
Centronic 00160
Sensory Science 01126
Sharp 01010
Setup Code for Audio
Sony 01272,
Receivers
01324, 01364
ADC 30531
Stack 9 01272
Adcom 30616
Sylvania 01563
CyberPower 01272
Systemax 01272
30121, 31388,
31641
Tagar Systems 01272
Epson 01563
Toshiba 01272
Gateway 01272 Alco 31390
Touch 01272
GC Electronics 00160
Hauppauge 01757
Verator 00113
AMC 31077
Amphion Media
Works
Hewlett Packard 01272, 01267
VIZIO 01126
Howard
Computers
01272
Voodoo 01272
Hush 01272
ZT Group 01272 Apex Digital
31563, 31615
31257, 31430,
31774
Arcam 31189 iBUYPOWER 01272 Setup Code for Audio
Accessories
Jebsee 00160
JVC 01384
Accurian 31106
Keyspan 01344
Altec Lansing 31056, 31485
Audiotronic 31189
30820, 30840
Leadtek 01614
LG 01415
Soundworks
31530 31253, 31841,
31933
Creative 30872 Brix 31602
Macro Image
Technology
01383
D-Link 31522 Cairn 30189
Media Center PC 01272
Imerge 31491 Cambridge
Soundworks
31370
Microsoft 01272
Integra 31789
Mind 01272 iPort 31917
Capetronic 30531
Version 8/21/2008 80 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for Audio
Receivers
Setup Code for Audio
Receivers
Setup Code for Audio
Receivers
30121, 31289
Classic 31352
Coby 31389
Criterion 31420
30189, 30391,
30531, 31266,
31514
Revox 30189
Rio 31869
Saba 31519
Curtis Mathes 30014
Daewoo 31250
30189, 30891,
31289
McIntosh 31289
31500
31764
Delphi 31414
Mitsubishi 31393
30121,
30771, 31142,
Myryad 31189
31306
Emerson 30531
New Castle 30502
Fisher 31801
Garrard 30463
Gateway 31517
Go Video 31532
Grundig 30189
30891, 31289,
31304, 31306
Initial 31426
Inkel 30491
Insignia 31030
Sharper Image
31801
31286
31556
Norcent 31389 31077, 31423,
31517, 31653
Nova 31389
Shinsonic 31426
30380,
30842, 31298,
31320, 31531 31811, 31987
Sonic Blue 31532, 31869
30014, 30121,
30186, 30502,
30532, 30670,
31074
Outlaw 30391
31258, 31759,
31622, 30168,
30474, 31406,
31558, 31658,
31758, 31858
Soundesign 30670
31298, 31320
30309, 30367,
31288, 31316,
31548, 31633,
31763, 31764
Stereophonics 31023
Sunfire 31313
31390, 31528
30189, 30391,
30891, 31266
31374, 31495,
31811
31570, 31569,
30186
30150, 30244,
30531, 30630,
31384
30309, 31384,
31633
Thorens 31189
31569, 30186
Polaroid 31508
Polk Audio 30189, 31289,
31414
31788
Venturer 31390
31428
Proscan 31254
Radioshack 31609
Victor 30074
Waitec 31352
Lasonic 31798
Lenoxx 31437
Lexicon 31076
LG 31293
31254, 30531,
31074, 31390,
31511 30186, 31176,
31276, 31331,
31375, 31476
Linn 31089
Liquid Video 31497
30186
Regent 31437
Version 8/21/2008 81 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for Audio
Amplifiers
Bose 30674
Carver 30892
Curtis Mathes 30300
Setup Code for Audio
Amp/Tuners
Setup Code for Audio
Amp/Tuners
Audiotronic 31189
31258, 31759
Bose 31229
Soundesign 30670
Capetronic 30531
Stereophonics 31023
Carver 31189
Sunfire 31313
Durabrand 31561 Coby 31263
Elan 30647 Denon 31360,
31142, 30904
Technics 31308,
31518, 30039
GE 30078
Fonmix 31360
Thorens 31189
Harman/Kardon 30892
Glory Horse 31263
Victor 30074
JVC 30331
Harman/Kardon 30110
Wards 30014
Left Coast 30892
Lenoxx 31561
Marantz 30321
McIntosh 30251
Modulaire 30395
Hitachi 31273
Yamaha 30176,
31276, 31176
Inkel 30027
Integra 30135
JBL 30110
Setup Code for TV’s
A-Mark 10047,
10054, 10165
Nakamichi 30321
NEC 30264
Kenwood 31313,
31570, 30027
Accuscan 10047,
10018, 10135
30300, 30823
KLH 31428
10185
Parasound 30246
Philips 30892
Polk Audio
Radio Shack
30823
30892
30395
Magnavox 31189,
31269, 30531
Marantz 31189,
31269, 30039
MCS 30039
Admiral 10047,
10054,
10017,
10051,
10093,
Optimus 31023,
30670,
30531, 31074
Addison 10092
10463,
10180,
10018, 10165
Advantz 10282
30823
Sansui 30321
Advent 10761,
10842,
11933,
10817,
10783, 10815 Shure 30264
Pioneer 31023,
30150,
30014,
30630, 30531
Adventuri 10000
Soundesign 30078 Agna 10150
Proscan 31254
Victor 30331 Aiko 10092
Qisheng 31609
Aiwa 11914
Quasar 30039
Setup Code for Audio
Amp/Tuners
RadioShack 31263
RCA 31023,
31609,
Akai 10060,
10812,
10702,
10030,
10672,
31254,
30531, 31074
11903,
10145, 10151
ADC 30531
Sharper Image 31263
Aiwa 31405,
31243, 30121
Silsonic 30176
Alfide 10672
Sony 31058,
31441,
Alleron 10030
Version 8/21/2008 82 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for TV’s Setup Code for TV’s Setup Code for TV’s
Cailing 10748 Crown 10180,
10093, 10672
America Action 10180 Candle 10030
Anam 10250,
10180, 10700
Celebrity 10000
Celera 10765
Anam National 10250,
10650, 10055
Crown Mustang 10672
American High 10000, 10060
Ampro 10751
Capehart 10017,
10178,
10030, 10092
Anhua 10051
AOC 10451,
10093,
Changhong 10156,
10765,
11156, 10767
10180,
10060,
Ching Tai 10092
10030,
10178,
10092, 10185
Chun Yun 10000,
10180,
10700,
10092, 10843
Apex Digital 10748,
10156,
10879,
10765,
10185,
10767, 11943
Chung Hsin 10180, 10053
Cinema 10672
Audiovox 10451,
10180,
10875,
10092,
10623,
10802,
11937, 11951
Citizen 10054,
10000,
10451,
10463,
10180,
10060,
10030,
Aventura 10171
10171,
10092,
10282, 11928
Curtis Mathes 10047,
10054,
10154,
10000,
10051,
10451,
10093,
10180,
10060,
10702,
10178,
10030,
10145,
10166,
10018,
10466,
11147,
11347, 11919
CXC 10180
Cytron 11326
Daewoo 10154,
10451,
10180,
10030,
10178,
10672,
11928,
10092,
10661,
11909,
10623, 10700
Dayu 10661
Axion 11937
Baile 10661
Civet 10185 Denon 10145,
10055, 10511
Clairtone 10185
Baysonic 10180
Clarion 10180
Denstar
Beaumark 10017,
Digital Life
10178, 10030
Colortyme 11447,
10661
Dumont 10017
Durabrand 10463,
Belcor 10030
Commercial
Solutions
11447, 10047
10180,
10178,
Bell & Howell 10154
Conic 10178
10171, 11034
BenQ 11032
Boxlight 10893
Bradford 10180
Broksonic 10236,
10463,
11911,
11938,
11905,
11935,
11929,
10180, 10177
Conrowa 10156,
10145, 11156
Craig 10180,
10171, 10282
Emerson 10047,
10154,
10451,
10236,
10463,
10180,
10150,
Crosley 10054,
10000,
10180,
10030,
10171, 10187
Electroband 10000
10178,
10171,
11944,
11929,
11928,
Version 8/21/2008 83 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for TV’s Setup Code for TV’s
10623,
10282,
10185,
10177, 10135
Grunpy 10180
Ether 10030
Hallmark 10178,
10236,
10180,
10135, 10187
Setup Code for TV’s
Inteq 10017
JBL 10054
JCB 10000
Jean 10156,
10051,
10236, 10092
ESA 10812,
10171, 11944
Firstar 10236
Fisher 10154,
10054,
10000, 10159
Harley Davidson
10030, 10178
11904,
10030,
10178,
10000,
10180, 10060
Jensen 10761
Jiahua 10051
Jinfeng 10051
Jinxing 10054,
10156, 10145
Harman/Kardon 10054 Jutan 10030
Fortress 10093
Fujitsu 10809,
10853, 10683
Harvard 10180
Havermy 10093
Funai 10180,
10171,
Futuretech 10180
Heathkit 10017
Helios 10865
11904, 10000
Furi 10145
Hello Kitty
Hewlett Packard
10451
11089,
11494, 11502
JVC 10053,
11923,
11253,
10054,
10030,
10055,
10731, 11253
Kamp 10017,
10180, 10185
GE 11447,
10047,
10000,
10051,
10451,
10748,
10145, 11156
Hitachi 10047,
10054,
10060,
10017,
10000,
10178,
10030,
10051,
10178,
10135,
10055,
11145,
10145,
10282,
11147,
11347,
10018,
10055,
10018,
11917,
10151,
10185,
11904, 11960
11919, 11922
Gemini 10047
Hisense 10156,
Kangli 10661
KLH 10765,
HP 11089,
11494, 11502
10767,
10156, 10180
Kolin 10180,
10150, 10053
Konka 10180,
10080,
10628,
10632,
10638,
10703,
10707, 10720
Gibralter 10017,
10030, 10000
Hongmei 10093 Kost 11262
Go Video 10886
Huafa 10145 Kloss 10030
Go Vision 11937
Huari 10145
Huodateji 10051
KTV 10180,
10030,
10185, 10463
GoldStar 10047,
10054,
10178,
10030,
10018,
11154, 11926
Imperial Crown
10180, 10178
10661
Gradiente 10053
Grundig 10706,
10672, 10683
Grundy 10180
Infinity 10054
Insignia 10171,
11326, 11517
LG 10054,
11265,
10060,
10178,
10030,
10700,
10856,
Version 8/21/2008 84 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for TV’s Setup Code for TV’s Setup Code for TV’s
11154,
11178, 11758
10497,
10704,
Megapower 10700 10882, 11704
Lloyd's 11904,
10236,
10180, 10030
10154,
10156,
Megatron 10178,
10145,
NetTV 11755
LXI 10047,
10054,
10047, 10151
Newave 10093,
MEI 10185
Memorex 10154,
10178, 10092
Nikko 10030,
10178, 10092
10178,
10017,
10463,
10185,
10000,
10150,
Nikkodo 10178,
10030, 10092
10178,
10051,
10093,
11911,
10060,
10053,
11926,
11924,
10178,
11920,
Norcent 10748,
10824, 11089
11927,
Noshi 10018
10030,
10171,
10030, 10165
NTC 10092
10166,
10055,
MGA 10150,
10030,
Nyon 10000
10135,
10178, 11907
Olevia 11144,
10018,
10159, 10165
MGN Technology 10178
11240, 11331
Micro Genius 10150
Onwa 10180
Magnasonic 10054,
10000,
10156,
10093,
10030,
10092, 11928
Magnavox 10047,
11454,
10054,
10154,
10000,
10250,
10051,
10180,
10060,
10030,
10171,
10092,
10706,
10187,
10282,
10386,
10802,
11254,
11755,
11904,
11931, 11944
Midland 10047,
10017,
10051,
10018, 10135
Mitsubishi 10154,
10250,
10093,
10236,
10180,
11250,
10150,
10030,
10178,
11917, 10836
Motorola 10093,
10051,
10054,
10150, 10055
Optimus 10154,
10250,
10093,
10180,
10150,
10178,
10030,
10166,
10165, 10650
Optoma 10887
Orion 10017,
10236,
10463,
10180,
10178,
11463,
10177, 11929
Pace 10092
Majestic 10017
Magnin 11907
Marantz 10054,
10030,
10704,
11454,
10854,
10855, 11154
Matsushita 10250,
10650, 10051
MTC 10060,
Panasonic 10054,
10030, 10000,
10180,
10156,
10092,
10250,
10185, 10282
10051,
Mudan 10051
10236,
10030,
Multitech 10180
10018,
10055,
NAD 10156,
10178,
10866, 10166
10650,
11291,
11410,
National 10051
11919,
11941,
11946, 11947
NEC 10047,
10156,
10178,
10030,
Version 8/21/2008 85 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for TV’s Setup Code for TV’s Setup Code for TV’s
Penney 10047,
10000,
10060,
10812,
10156,
10250,
10051,
10060,
10178,
10030,
10018,
Quasar 10250,
10051,
11924,
10650,
10055,
10165, 11919
10702,
10030,
10178,
11060,
10814,
10092,
11903,
10135,
10159,
11347,
11919, 11926
Rabbit 10047
RadioShack 10047,
10154,
10090, 10766
Sansui 10463,
11904,
11935,
11929, 11911
Philco 10054,
10180,
10030,
10180,
10150,
10178,
Sanyo 10154,
10156,
10178,
10187,
10030,
10165, 11904
10180,
10145, 11907
10145, 10463
Philips 11454,
10054,
10030,
10171,
10187,
10690,
11154, 11254
Pilot 10030,
10051,
10060, 10178
Pioneer 10166,
10866,
10679,
10055, 11260
Polaroid 10765,
10865,
RCA 11447,
Sanyuan 10093
10047,
10054,
10000,
Scotch 10178
10051,
Scott 10236,
10180, 10178
10093,
10178,
11958,
11953,
Sears 10047,
10054,
11948,
11922,
11919,
11917,
11547,
11347,
11247,
11147,
11047,
10774,
10154,
10156,
10178,
10171,
11926, 11904
Shaofeng 10145
Sharp 10093,
10030,
10650, 11917
11262,
11276,
11314,
11316,
11326, 11327
10679,
10165,
10135,
10090, 10018
Shen Ying
Shencai 10145
Sheng Chia
10092
10093, 10236
Portland 10092
Realistic 10047,
10154,
10180,
10150,
Skygiant 10180
Skyworth 10748 Precision 10236,
10180,
10177,
10185, 10282
10178,
10030, 10165
Rhapsody 10185
Sony 11100,
10000,
10650,
11925, 11904 Prima 10761,
10783,
10815,
10817, 11933
Road Authority 10282
Rowa 10748
Prism 10051
Sowa 10156,
10051,
10060,
10178, 10092
Proscan 11447,
10047,
11922,
10018,
10135,
10466, 11347
Sampo 10154,
10093,
10030,
10178,
10171,
10700,
10650,
11755, 10092
Squareview 10171
SSS 10180
Starlite 10180
Studio Experience 10843
Supreme 10000
10156,
Version 8/21/2008 86 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for TV’s Setup Code for TV’s Setup Code for TV’s
Sylvania 10054,
10030,
10171,
11944, 11931
Runco 10017,
10060,
10030,
10497, 10603
Sampo 10047,
10030,
11755, 11756
Samsung 10047,
10054,
10017,
10154,
10060,
10812,
10702,
10178,
10030,
11959,
11903,
11312,
11060,
10814,
10766,
10587, 10055
Sheng Chia
10060,
10053,
10178,
10030,
10171,
10166,
10055,
10135,
10018,
10159,
10165,
11904, 11926
Sharp 10054,
10093,
10180,
10165,
10386,
10491,
10688,
10689,
10818,
10851,
11393, 11917
10093
Shivaki 10178
Seimens 10145
Studio Experience 10843
Superscan 10093,
10864, 11944
Supreme 10000
SV2000 10054
SVA 10748,
10587,
10768,
10865,
10870,
10871, 10872
Sylvania 10047,
10054,
10154,
10000,
10051,
10178,
10030,
10171,
10092,
10159,
10187,
11904,
11926,
11931, 11944
Signature 10047,
10093,
10030,
10165, 10187
Symphonic 10000,
10180,
10178,
10171,
11904, 11944 Sansui 10463,
10060,
10030,
10165,
11904,
11929, 11935
Signet 11262
Simpson 10178,
10030, 10187
10093,
10060,
Sanyo 10047,
10054,
10154,
10000,
10463,
10171,
10159,
10799,
10893, 11755
Saville 10060
Sceptre 10878
Scotch 10178
Solar Drape 10000
11240, 11331
Sole 10813
10092
Sony 10017,
10165
10154,
11100,
10000,
10150,
10053,
10080,
10632,
10834,
11904, 11925
Tatung 10054,
10154,
10156,
10051,
10060,
11156,
11756,
11254, 10000
Scott 10236,
10180,
10178,
Sova 11952
Teac 10154,
10706,
10159,
10030, 10177
Spectravision 10156,
10178, 10159
10282, 10689
Sears 10047,
10054,
10017,
Squareview 10171
Technics 10250,
10051,
10055, 10054
10154,
10000,
SSS 10180 Technovox 10030
10156,
10051, Techview 10847
10093,
Version 8/21/2008 87 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
Setup Code for TV’s Setup Code for TV’s Setup Code for TV’s
Techwood 10051,
10250,
10060, 10055
Universum 10177
10180, 10171
Yamaha 10030
Teco 10051,
V 10178,
10093,
10864,
Yapshe 10250
10178, 10092
10885,
Yorx 10030
11755, 11756 Zenith 10047,
Teknika 10054,
10463,
10180,
10150,
10060,
10178, 10092
VIZIO 10178,
10864,
10885,
11499,
11756,
11758, 10030
10017,
10000,
10093,
10463,
11265,
10812,
10178,
Telecolor 10017
Vector Research 10030
10030,
Telefunken 10702
11145,
Victor 10250, 10145,
Tera 10030 10053, 10650 10171,
10092,
Thomas 11904, Vidikron 10054
11904, 11929
10047, 10178
Vidtech 10178
Tiane 10093
Viewsonic 11755,
10885,
TMK 10178,
10236,
10180, 10177
10864,
11578, 10857
Viking 10060
Setup Code for Home
Automation
Accutek 31215
TNCi 10017 Wards 10047,
10054,
Tobo 10748
Tocom 10156
10017,
10154,
Tomashi 10282
10000,
10051,
10093,
Toshiba 10154,
11256,
10236,
10178,
10156,
10150,
11265,
10060,
11145,
10030,
10166,
11156,
10866,
10187,
10145,
10166,
11945,
11936,
11935,
10165,
10151,
10080, 10018
Warumaia 10661
11918,
11704,
11656,
Waycon 10156
Welton 10178
11356,
11156,
10845,
10832, 10650
Westinghouse 10000,
10451,
10885,
10889, 11282
Tosonic 10185
Totevision 10051
White
Westinghouse
10463,
11909,
Toyomenka 10178
10623,
10451,
10236, 10889 Truetone 10250,
10051, 10055
World 10451,
10236,
10463, 10180
TVS 10463
XR-1000 10154,
Ultra 10095
Amana 31716
Frigidaire 31333
GE 30240
GoldStar 31537
Holmes 31215
Kenmore 31537
Lasko 30846
LG 31537
Lightolier 30184
Lutron 30597,
30318,
31239, 31597
Marmitek 30167
One For All
Royal Sovereign
Security System
Sharper Image
Universal X10
30167
PCS 30184
RadioShack 30240
31651
30167
30846
SmartLinc 30184
Universal 30167
30167
Version 8/21/2008 88 www.VIZIO.com
Whirlpool 31332 Windmere 31215
VIZIO
®
VP505XVT1A User Manual
X10 30167
Version 8/21/2008 89 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
VIZIO Limited Product Warranty
VIZIO provides a “ONE-YEAR LIMITED WARRANTY” against manufacturing defects in materials and workmanship to the original purchaser of a new VIZIO display purchased from an authorized VIZIO U.S. reseller and used in the fifty (50) United States or Puerto Rico.
VIZIO’s Responsibility
VIZIO displays purchased new from an authorized VIZIO U.S. reseller and that are used in the fifty (50)
United States or Puerto Rico are warranted to be free from manufacturing defects in materials and workmanship for one (1) year from the date of the original retail purchase. If the display fails to conform to this limited warranty, VIZIO will, at its option and sole discretion, repair or replace the display.
Labor
During the one-year limited warranty period, VIZIO will provide, when needed, service labor to repair a manufacturing defect. Repairs required on displays which are thirty (30) inches and larger generally will be made “on-site” where the display is installed. The determination for performing the on-site repair is dependent upon the manufacturing defect and is at VIZIO’s option and sole discretion. Repairs required on displays which are less than thirty (30) inches generally will be performed at a VIZIO service center.
Parts
Repairs may be made with new or recertified parts, or the entire unit may be replaced with a new or recertified unit, at VIZIO’s option and sole discretion. Replacement parts or replacement units provided under this limited warranty are warranted for the remaining portion of the original warranty period, or for ninety (90) days from warranty service or replacement, whichever is later.
How to Obtain Warranty Service
To obtain warranty service, contact VIZIO Technical Support via email at [email protected], via phone at 877-MYVIZIO (877-698-4946), or via postal mail at VIZIO Technical Support, 39 Tesla, Irvine,
CA 92618. You must provide the model, serial number, and date of purchase. VIZIO Technical Support is available from 6:00AM to 9:00PM Pacific Time, Monday through Friday, and 8:00AM to 4:00PM Pacific
Time, Saturday and Sunday. Please note that holiday hours may vary. For up to date information, please visit www.VIZIO.com.
VIZIO reserves the right to assess all warranty claims and to determine if defects or damages are covered by this limited warranty. In case of a claim that is not covered by this warranty, you will be contacted to determine whether VIZIO should repair the damage for a fee or whether the product should be returned to you as received by the service technician or service center.
Parts and service labor that are VIZIO’s responsibility under this limited warranty will be provided without charge. All other service is at the customer’s expense. VIZIO reserves the right to charge the customer for any service call for anything not covered by this limited warranty. Before you ask for warranty service, please review your User Manual. You may avoid a service call and a service charge.
Please refer to the reverse side of this page for additional information regarding how to obtain warranty service.
Version 8/21/2008 90 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
PLEASE DO NOT RETURN YOUR UNIT TO VIZIO WITHOUT PRIOR AUTHORIZATION.
What Is Not Covered
This limited warranty does not cover the following: cosmetic defects; damage, malfunctions or failures resulting from shipping or transit, improper or faulty installation, abuse, operation contrary to furnished instructions, operation on incorrect power supplies, products not supplied by VIZIO, modification, alteration, improper servicing or tampering; damage from fire, water, lightning, power surges, abnormal environmental conditions or other acts of nature; normal wear and tear; unsatisfactory visual or audio performance not caused by a manufacturing defect; or displays with a missing or unreadable serial number. Operation of the display for commercial purposes or in applications or uses for which the display is not intended is not covered by this limited warranty. “Image Sticking”, caused by static images on the screen for extended periods and or excessive brightness and contrast levels, is not covered by this limited warranty. Installation, removal, transportation and reinstallation of a display, and routine maintenance and cleaning, are not covered by this limited warranty.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE.
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF
TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES
RESULTING FROM ANY CAUSE WHATSOEVER, INCLUDING VIZIO’S NEGLIGENCE, ALLEGED
DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT,
SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE DISPLAY. VIZIO SHALL NOT BE
RESPONSIBLE FOR LOSS OF USE, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR
OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This is the only warranty applicable; no one is authorized to extend or modify it or to grant any other warranty on VIZIO’s behalf.
Owner’s Responsibility
To ensure warranty service, keep the dated bill or sales receipt as evidence of the purchase date and location. This limited warranty applies only to original purchaser and is non-transferable.
Warranty service conditions are subject to change. For the latest Warranty Terms and Conditions and additional information regarding VIZIO’s Limited Product Warranty, please see complete details online at www.VIZIO.com.
Version 8/21/2008 91 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
VIZIO RETURN POLICY
VIZIO’s return policy allows for products purchased directly from VIZIO to be returned by the original purchaser during the initial thirty (30) day period following the date of purchase. A VIZIO return authorization number must first be obtained as provided below. The refund will be the purchase price actually paid by the purchaser less a ten percent (10%) restocking fee per each item returned. Shipping and handling are not refundable.
The return authorization number must first be obtained from VIZIO’s Customer Service by emailing
[email protected] or by calling 949-428-2525, 6:00AM to 9:00PM Pacific Time, Monday through Friday, and
8:00AM to 4:00PM Pacific Time, Saturday and Sunday. Please note that holiday hours may vary. For up to date information, please visit www.VIZIO.com.
Products must be returned to the address specified by VIZIO Customer Service and must be shipped in the original packaging, with freight prepaid to VIZIO, and must be received in new and unused condition. The return authorization number must be included in the packaging. VIZIO reserves the right to assess fees for any damaged or missing parts in addition to the ten percent (10%) restocking fee.
Return authorization numbers are valid for only fifteen (15) days from issuance. The customer is responsible for and must prepay all shipping charges and shall assume all risk of loss or damage to the product while in transit to VIZIO. If the product is returned to VIZIO (i) without a VIZIO return authorization number, and/or (ii) beyond the fifteen (15) day period, and/or (iii) without proper packaging, VIZIO retains the right to refuse delivery of such return or may return the unit to the customer at the customer’s expense and with no refund issued. This return policy does not apply to defective products. Please read VIZIO’s Limited Product
Warranty for warranty terms and conditions.
ON-SITE WARRANTY
REPAIR PROCEDURE
On-Site Warranty Repair generally is performed on repairable displays which are 30 inches
and larger.
If VIZIO Technical Support determines that a problem with a display unit may be within the terms and conditions of the VIZIO
Limited Product Warranty and that an on-site repair may be performed, the customer will be provided with an on-site repair authorization number and on-site repair instructions. The determination for performing the on-site repair may be dependent upon the manufacturing defect and is at VIZIO’s option and sole discretion. Proof of purchase is required to confirm the product is within the one-year limited warranty period and meets the terms and conditions of the VIZIO Limited Product Warranty.
On-site repair service is requested through VIZIO’s third-party service provider. After VIZIO provides the customer with the onsite repair (OSR) authorization number, the third-party service provider will contact the customer and will schedule the repair at the customer's location. The total approximate time for the repair process, which includes the repair diagnosis, dispatching the technician, shipping the replacement part(s), and arranging the appointment with the customer, is completed within approximately 3 to 5 business days, pending availability of these factors.
If it is determined the product can not be repaired on-site, the customer will be required to ship the unit to VIZIO’s service center, per the below warranty replacement procedure.
VIZIO is not responsible for the de-installation or re-installation of the product. However, some standard installation may be performed during the on-site repair, at VIZIO’s option and sole discretion. Please read VIZIO’s Limited Product Warranty for warranty terms and conditions.
WARRANTY REPLACEMENT PROCEDURE
Warranty Replacement generally is performed on displays which are determined to be economically unrepairable.
If VIZIO Technical Support determines that a problem with a display unit may be within the terms and conditions of the VIZIO
Limited Product Warranty and that a repair is not economically possible, based on certain manufacturing defects in materials and/or workmanship, and/or at VIZIO’s option and sole discretion, the customer will be provided with a return authorization number and replacement instructions. Proof of purchase is required to confirm the product is within the one-year limited warranty period and meets the terms and conditions of the VIZIO Limited Product Warranty.
Version 8/21/2008 92 www.VIZIO.com
VIZIO
®
VP505XVT1A User Manual
For displays forty-two inches (42”) and larger, VIZIO will generally cover the transportation charges to perform an on-site swap of the original unit with the replacement unit. For displays under forty-two inches (42”), the customer is responsible for the transportation charges to VIZIO’s service center. VIZIO will be responsible for the return transportation charges from the service center to the customer. Please read VIZIO’s Limited Product Warranty for warranty terms and conditions.
MAIL-IN WARRANTY REPAIR PROCEDURE
Mail-In Warranty Repair generally is performed on displays which are smaller than 30 inches.
If VIZIO Technical Support determines that a problem with a display unit may be within the terms and conditions of the VIZIO
Limited Product Warranty and that a mail-in repair may be performed, the customer will be provided with a return authorization number and mail-in repair instructions. Proof of purchase is required to confirm the product is within the one-year limited warranty period and meets the terms and conditions of the VIZIO Limited Product Warranty.
The customer will be provided with instructions for packing and shipping the unit to the VIZIO service center. The original carton box and packing material, or an equivalent as designated by VIZIO, must be utilized. The cost of shipping to VIZIO’s service center is at the customer's expense. After the product is repaired and tested, the VIZIO service center will ship the unit back to the customer at VIZIO’s expense. VIZIO is not responsible for the de-installation or re-installation of the product. Please read
VIZIO’s Limited Product Warranty for warranty terms and conditions.
PLEASE DO NOT RETURN YOUR UNIT TO VIZIO WITHOUT PRIOR AUTHORIZATION.
Version 8/21/2008 93 www.VIZIO.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 9 Chapter 1 Basic Controls and Connections
- 9 1.1 Front Panel
- 9 1.2 Side Panel Controls
- 10 1.3 Rear Panel Connections
- 11 1.4 Right-Side Panel Connection
- 12 1.5 VIZIO Universal Remote Control
- 15 1.5.1 Insertion of Batteries in the Remote Control
- 15 1.5.2 Remote Control Range
- 15 1.5.3 VIZIO Universal Remote Control Precautions
- 16 Chapter 2 Connecting Equipment
- 16 2.1 Which Video Connection Should I Use?
- 17 2.2 Connecting Coaxial (RF)
- 17 2.2.1 Using Your Antenna or Digital Cable for DTV
- 17 2.2.2 Using the Antenna or Cable through your VCR
- 18 2.3 Connecting Your HDTV Set-Top Box
- 18 2.3.1 Using HDMI Input
- 20 2.3.2 Using Component Video
- 21 2.4 Connecting Your Basic Set-Top Box
- 21 2.4.1 Using Composite Video
- 21 2.4.2 Using Coax (RF)
- 22 2.5 Connecting Your DVD Player
- 22 2.5.1 Using HDMI Input
- 24 2.5.2 Using Component Video
- 25 2.5.3 Using S-Video (AV/S-VIDEO)
- 26 2.5.4 Using Composite (AV) Video Input
- 28 2.6 Connecting an external Receiver/Amp
- 29 2.6.1 Optical Output of Audio received
- 30 2.7 Connecting a PC (Computer)
- 31 2.7.1 Preset PC Resolutions
- 32 Chapter 3 Setting Up to Watch Television
- 32 3.1 Basic PLASMA FHDTV Start Up
- 36 3.2 ATV/DTV Tuner Setup
- 38 3.3 Watching a TV Program
- 39 3.4 Adjusting Basic FHDTV Settings
- 40 3.5 Program Information
- 40 3.6 Information on FHDTV Status
- 41 Chapter 4 Advanced Adjustment of FHDTV
- 41 4.1 Using the On Screen Display (OSD)
- 42 4.2 TV Inputs Picture Adjustment
- 42 4.2.1 Picture Mode
- 42 4.2.2 Brightness
- 43 4.2.3 Contrast
- 43 4.2.4 Color
- 44 4.2.5 Tint
- 44 4.2.6 Sharpness
- 45 4.2.7 Color Temperature
- 45 4.2.8 Advanced Video Features
- 46 4.2.9 Reset Picture Mode
- 47 4.3 TV Input Display (Screen) Adjustments
- 47 4.3.1 Auto Adjust
- 48 4.3.2 Wide Mode
- 48 4.3.3 Horizontal Position
- 48 4.3.4 Vertical Position
- 48 4.3.5 Clock
- 49 4.3.6 Phase
- 49 4.3.7 Overscan
- 50 4.4 TV Inputs Audio Adjustment
- 50 4.4.1 Volume
- 50 4.4.2 Bass
- 51 4.4.3 Treble
- 51 4.4.4 Balance
- 51 4.4.5 SRS TruSurround HD (SRS TSHD)
- 51 4.4.6 Speakers
- 52 Chapter 5 SPECIAL FEATURES
- 52 5.1.1 MTS
- 52 5.2 Special Features Adjustments
- 52 5.2.1 Language
- 52 5.2.2 Sleep Timer
- 52 5.2.3 Analog CC (Closed Caption)
- 53 5.2.4 Digital Closed Caption Style
- 54 5.2.5 PIP (Picture-in-Picture)
- 55 5.2.6 Image Cleaner
- 55 5.2.7 Reset All Settings
- 56 5.3 Parental Control
- 56 5.3.1 DTV / TV Input Parental Control
- 56 5.3.2 Parental Lock Enable
- 57 5.3.3 Digital TV Parental Control
- 58 5.3.4 TV Rating
- 58 5.3.5 Movie Rating
- 59 5.3.6 Blocked Unrated Programming
- 59 5.3.7 Access Code Edit
- 60 5.4 Understanding Viewing Features
- 60 5.4.1 Viewing Modes
- 61 Chapter 6 Picture-In-Picture (PIP) Mode
- 61 6.1 PIP Mode Adjustments
- 61 6.1.1 Adjusting Basic PIP Settings
- 62 6.2 Programming the VIZIO Universal Remote Control
- 62 6.2.1 Programming for Audio Tuner Amplifier
- 62 6.2.2 Programming for Cable Set-Top Box
- 63 6.2.3 Programming for DVD Player
- 63 6.2.4 Searching for Component Codes
- 63 6.3 Using a Cable or Satellite Remote
- 64 Chapter 7 Maintenance and Troubleshooting
- 64 7.1 Maintenance
- 64 7.2 Troubleshooting Guide
- 66 7.3 Telephone & Technical Support
- 67 7.4 Compliance
- 67 7.5 FCC Class B Radio Interference Statement
- 68 Chapter 8 Miscellaneous Information
- 68 8.1 Specifications
- 69 8.2 Glossary – Standard Definitions
- 70 8.3 Index
- 72 8.4 Component Program Codes