Samsung DVD-N2000 Troubleshooting guide

ELECTRONICS
SAMSUNG ELECTRONICS AMERICA INC.
105 CHALLENGER ROAD, RIDGEFIELD
PARK, NJ 07660 U.S.A.
FOR YOUR NEAREST SAMSUNG
SERVICE CENTER
DIAL 1-800-SAMSUNG
AH68-00433A
P recautions
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage” inside the product
that presents a risk of electric
shock or personal injury.
This symbol indicates important
instructions accompanying the
product.
CAUTION: DVD PLAYERS USE AN INVISIBLE LASER BEAM WHICH CAN
CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE PLAYER CORRECTLY AS INSTRUCTED.
CAUTIONS
Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Attention: Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche dans
la borne correspondante de la prise et pousser jusqu au fond.
This product satisfies FCC regulations when shielded cables and connectors are used to
connect the unit to other equipment. To prevent electromagnetic interference with electric
appliances, such as radios and televisions, use shielded cables and connectors for
connections.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets all requirements of the Canadian Interference -Causing Equipment Regulations.
CLASS 1
LASER PRODUCT
LUOKAN 1 LASER LAITE
KLASS 1
2
LASER APPARAT
P recautions
WARNING
CAUTION
To reduce the
risk of fire or
shock hazard, do
not expose this
DVD player to
rain or moisture.
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER
AND DO NOT REPAIR YOURSELF. REFER SERVICING TO
QUALIFIED PERSONNEL.
Note:
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used
elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management
Information. If the Region number of a DVD disc does not correspond to the Region
number of this DVD player, the DVD player cannot play the disc.
• This device is protected by U.S. patent numbers 4,631,603, 4,577,216 and 4,819,098
and other intellectual property rights. The use of Macrovision’s copy protection technology in the device must be authorized by Macrovision and is intended for home and other
limited pay-per-view uses only, unless otherwise authorized in writing by Macrovision.
Reverse engineering or disassembly is prohibited.
Handling Cautions
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity can affect normal operation of
this player. If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The player will
operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player
for long periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
Disc Storage
Be careful not to harm the disc because the data on these discs is highly vulnerable to the
environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
3
A bout
Discs
Discs you can play
Digital video discs
5" and 31/2", single or double sided, single or dual layer. DVDs are
high density optical discs on which high quality picture and audio
are recorded by means of digital signals.
Video CDs
5" and 31/2" (with or without playback control).
Audio CDs
5" and 31/2"
NUON interactive DVD software
NUON
TM
Disc Functions
Functions and information available on the DVDs (titles, chapters, subtitles, ratings, multi
angles and more) may differ from disc to disc.
• When
appears on screen, it indicates an invalid button press.
Discs that cannot be played
CD-I, CD-ROM, DVD-ROM, DVD-RAM discs cannot be played in this unit.
CD-G can play audio only, not graphics.
Region code
Your
DVD player is designed and manufactured to respond to the
~
region management information that is recorded on a DVD disc.
COPY PROTECTION
• Many DVD discs are encoded with copy protection. Because of this, you should
only connect your DVD player directly to your TV, not to a VCR. Connecting to a
VCR results in a distorted picture from copy-protected DVD discs.
• This product incorporates copyright protection technology that is protected by methods
claims of certain U.S. patents and other intellectual property rights owned by the
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by the Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
DVD-N2000
SKIP
HEAD
OPEN/CLOSE
OPEN/
CLOSE
4
STOP
SCREEN FIT
TABLE OF CONTENTS
Tour of the Remote Control ................... 1 0
• DVD Function Buttons ......................... 11
• TV Function Buttons ............................ 11
• Samsung N2000 Joystick .................... 12
SETUP
Before You Start ......................................6
Description .............................................. 7
• Front Panel ........................................... 7
• Front Panel Display ...............................8
• Rear Panel .......................................... 9
• Connection to a TV ..............................14
Using the Setup Menu ..........................15
Setting Up the Language Features ........16
Playing a Disc .........................................17
Search & Skip ..........................................19
A-B Repeat & 3D Sound..........................20
Bookmark ...........................................21
MediaMacro Zoom & Pan .................... 22
TM
TM
ActionCapture Strobe & Snapshot Mode. 23
AngleViewTM Display & Screen Fit ........... 24
Selecting the Audio Language ............. 25
Selecting the Subtitle Language ........... 26
PLAYBACK
Spectrum Analyzer & Game .................27
Using the Display Function .....................28
Setting Up the Disc Language .............. 29
Setting Up the Parental Control ............ 30
Setting Up the Audio Options ............... 31
Setting Up the Display Options .............32
SPECIALS
Remote Control Setting ........................33
Troubleshooting Guide .........................34
Specifications .................................... 35
Warranty ........................................... 36
REFERENCE
CONNECTIONS
Choosing a Connection ......................... 13
• Connection to an Audio System ..........13
TM
5
B efore You
Start
Accessories
Remote Control
Batteries for
Remote Control
(AA Size)
S-Video Cable
User’s Manual
Video/Audio Cable
Joy Stick
Install Batteries in the Remote
1 Open the battery cover on the back of the remote.
2 Insert two AA batteries. Make sure that the polarities (+ and -) are
aligned correctly.
3 Replace the battery cover.
If remote doesn’t operate properly:
• Check the polarity + - of the batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
6
D escription-Front
1
2 3 4
5
7
Panel
9
8 10
SETUP
SKIP
HEAD
OPEN/CLOSE
STOP
SCREEN FIT
OPEN/
CLOSE
6
111213
Front Panel Controls
1 STANDBY/ON
• When the unit is first plugged in, this indicator lights.
2 NUON PORTS
• Allow you to plug in joystick or other peripherals.
3 HEADPHONES JACK
• You can attach headphones here for private listening.
4 HEADPHONES VOLUME
• Use to adjust headphones volume level.
5 DISPLAY
• Operation indicators are displayed here.
6 DISC TRAY
• Press OPEN/CLOSE to open and close the disc tray.
7 SKIP
• Use to skip chapters or tracks.
8 JOG DIAL
• Operates frame by frame playback.
9 SHUTTLE DIAL
• Performs fast or slow motion playback.
10 PLAY/PAUSE
• Begin or pause disc play.
11 OPEN/CLOSE
• Press to open and close the disc tray.
12 STOP
• Stops disc play.
13 SCREEN FIT
• Allows you to eliminate the black bars of the screen and fill any TV screen completely
with the picture.
7
F ront
Panel Display
1
3 5
6
9
12
10
13
14
24
7
8
11
Front Panel Indicators
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Indicates Disc is turning
Disc playback
Disc type indicators
Still picture or audio pause
Lights when 3D surround is turned on.
Angle indicator. You can select multiple angles of a scene recorded by different
cameras.
DVD : Title number, Video/Audio CD : Track number
DVD : Chapter number.
Displays title, chapter or track number.
Repeat play mode
Displays various messages concerning operations such as PLAY, STOP, LOAD, ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
HDCD : When an HDCD® recording is detected, the letters “HDCD” will flash for
about 10 seconds at the beginning of the track. (See NOTE below.)
Dolby Digital Disc
Linear PCM audio output
DTS (Digital Theater System) output
NOTE
This product is equipped with HDCD® decoding and filtering technology. Please note that
HDCD playback decoding will increase the dynamic range of CDs recorded with the
HDCD process, which may cause their average level to sound quieter than other CDs.
8
D escription-Rear
2
CENTER
S/W
OPTICAL
R
R
3
4
5
SETUP
1
Panel
6
FRONT
L
R1
L1
V1
Pr
SURROUND
L
R2
L2
V2
Pb
Y
COAXIAL
DIGITAL AUDIO OUT
5.1CH SURROUND AUDIO OUT
AUDIO OUT
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
Rear Panel Jacks
1 DIGITAL AUDIO OUT JACK
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital
receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital decoder or
DTS decoder.
2 5.1CH SURROUND AUDIO OUT JACKS
• Connect to an amplifier with 5.1CH analog input jacks.
3 AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
• Audio will be output via Front (R/L) of the analog audio out jacks except for
CASE1 (2CH).
4 VIDEO OUT JACKS
• Use a video cable to connect one of these jacks to the Video input on your television.
5 S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a
higher quality picture.
6 COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jack on your television for a
higher quality picture.
To Connect Headphones (not included)
Connect headphones with a standard stereo plug to the headphone jack (M6).
• Before connecting, set headphone volume at minimum. Then adjust to a suitable volume.
9
T our
of the Remote Control
1
2
3
A
4
5
6
7
8
9
10
11
12
10
13
B
C
14
15
16
17
18
19
20
21
22
23
24
25
26
T our
of the Remote Control
DVD Function Buttons
5
6
7
8
9
DVD POWER
NUMBER
OPEN/CLOSE
SETUP/SNAP SHOT
• During normal play, pressing the
SETUP button will bring up the DVD
player's Setup menu. When the
SETUP button is pressed in the
"pause" mode (when the PAUSE button has been pressed), a special
image processing menu comes up on
the screen. This menu allows you to
modify the picture characteristicsGamma, color, contrast, and brightness- of the still image on the screen.
ZOOM
SEARCH
• Allows you to search forward/backward through a disc while it is in play
mode (or slow speed search in pause
mode).
STOP
STEP
• Advances playback one frame at a
time.
RETURN
• Returns to previous state.
10 TOP MENU
• Takes you to the menu on the DVD
disc or CD/VCD.
11 AUDIO
• Use this button to access various
audio functions on a disc.
12 p STROBE
• Pressing this button divides the
screen into 9 blocks. A continuous
motion snap-shot advancing every 0.5
seconds is split across these blocks
in order.
13 TV POWER
• Use to set the remote to control a
compatible TV.
14 SCREEN FIT
• Allows you to eliminate the black bars
at the top and bottom of the screen.
15 3D SOUND
• Use to simulate the surround effect
through speaker or headphones.
16 BOOKMARK
• Use to memorize scenes for replay.
17 PLAY/PAUSE
• Begin/Pause disc play.
18 SKIP
• Use to skip the title, chapter, or track.
19 CLEAR
• Use to remove menus or status displays from the screen.
20 NUON
•Pressing this button brings up a special NUON menu. When a DVD disc
has enhanced NUON content, you can
navigate and view this extra content by
going to this menu first.
21 DISPLAY
• Brings up a "SmartMartrixTM user interface" On-screen display, that displays
the current disc mode (for DVD) and
allows you instant access to the DVD
features. During CD playback this
brings up a VLM (Virtual Light
MachineTM) screen.
22 MENU
• Brings up the Disc menu.
• Use to select the various VLM
screens.
23 ENTER/DIRECTION
(UP/DOWN or LEFT/RIGHT)
• This button functions as a toggle
switch.
24 m ANGLE
• Use to access multiple angles on a
DVD.
25 SUBTITLE
26 A-B REPEAT
• Use to mark a segment to repeat
between A and B.
TV Function Buttons
A
B
CHANNEL UP/DOWN Buttons
TV/VIDEO Selection Button
C
VOLUME UP/DOWN Buttons
11
SETUP
1
2
3
4
S amsung
N2000 Joystick
1 2
34 5
6
Joystick Controls
1
2
3
4
5
6
7
8
D (Up/ Down/ Left/ Right) Button
Front Left Button
NUON Button
B Button
Front Right Button
Start Button
A Button
C (Up/ Down/ Left/ Right) Buttons
12
7
8
C hoosing
a Connection
The following show examples of connections commonly used to connect
the DVD player with a TV and other components.
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
• Refer to user’s manual of the components you are connecting for more information on those particular components.
CONNECTIONS
Connection to an Audio System
Method 2
Method 1
2ch Amplifier
Audio Input Jacks
R
L
Method 3
5.1ch Analog Amplifier
Dolby Digital Decoder
Audio Input Jacks
Digital Audio Input Jacks
Center Front (R)
Front (L)
Rear (R)
Rear (L)
Subwoofer
OPTICAL
AUDIO
SYSTEM
COAXIAL
OR
R1
L1
R2
L2
CENTER
S/W
R
R
FRONT
SURROUND
L
L
OPTICAL
AUDIO OUT
Audio Out
5.1CH SURROUND AUDIO OUT
5.1CH Surround Audio Out
COAXIAL
DVD
PLAYER
DIGITAL AUDIO OUT
Digital Audio Out
Connection to an Audio System
• Method 1
DVD Player + 2CH Stereo Amplifier, Dolby Pro Logic Decoder
• Method 2
DVD Player + Amplifier with 5.1CH Surround Audio Input Jacks
• Method 3
DVD Player + Amplifier with Dolby Digital Decoder/DTS Decoder
(Speaker setup menu should be set to Case 1 (See page 31).)
13
C hoosing
a Connection
Connection to a TV
TV (Normal, Widescreen, Projection, etc..)
Method 1
TV
R
Pr
L
L1
V1
Pr
R2
L2
V2
Pb
Basic
Audio
VIDEO OUT
S-VIDEO OUT
Good
picture
Better
picture
Connection to a TV (For Video)
• Method 1
DVD Player + TV with Video Input Jack
• Method 2
DVD Player + TV with S-Video Input Jack
• Method 3
DVD Player + TV with Component Video Jacks
Pb
Video
Cables
(not included)
R1
AUDIO OUT
Y
S-Video
Cable
(included)
OR
OR
14
Component
Video Jacks
Audio Input Jacks Video Input Jack S-Video Jack
AV Cable
(included)
DVD
PLAYER
Method 3
Method 2
Y
COMPONENT VIDEO OUT
Best picture
U sing
the Setup Menu
The Setup Menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental control, even adjust the player to the type of television
screen you have.
1 Press the SETUP button on the remote.
DISC MENU
Setup of the Menu Language (See page 29)
Use the Menu preference menu to select the language you want a DVD’s disc menu to be
displayed in.
AUDIO
Setup of the Audio Language (See page 16)
Use the Audio preference menu to select the soundtrack language.
SUBTITLE
Setup of the Subtitle Language (See page 16)
Use the Subtitle preference menu to select the language the disc’s subtitles are to be
dis played in.
PLAYBACK
PARENTAL
Setup of the Parental Control (See page 30)
Use to deny playback of discs or scenes with objectionable material.
(Must be supported by the disc.)
AUDIO OPTIONS
Setup of the Audio Options (See page 31)
Use to set up the audio options such as speaker setup.
DISPLAY OPTIONS
Setup of the Display Options (See page 32)
Use to select which type of screen you want to watch and several display options.
the UP/DOWN button on the remote to access the different fea2 Use
tures.
the ENTER button to access the sub features.
3 Press
To make the setup screen disappear after setting up, press the SETUP button again.
NOTE
• Not all Setup Menu selections will work - this is dependent on the DVD disc content. For
example, the subtitle setup menu option will not have any effect on a disc that does not
have subtitle support. The Setup menu won't work with VCDs.
• Changes made to the first three Setup Menu items (1. Disk Menu, 2. Audio, 3. Subtitle)
will only become effective after opening and closing the disc tray.
15
S etting
Up the Language Features
Using the Audio Language
SETUP MENU
1 Disc Menu
English
2 Audio
English
3 Subtitle
Automatic
4 Parental
Unlocked
1
2
Press the SETUP button.
3
4
Press the ENTER button.
Press the UP/DOWN button
to move to AUDIO.
5 Audio Options
6 Display Options
Audio Language
English
Nederlands
Norsk
Arabiv
Russian
Francais
Oesky
Polski
Chinese
Turkish
Deutsch
Dansk
Portugues
Greek
Original
Espanol
Magyar
Suomi
Hindi
Italiano
Svenska
Afrikanns
Japanese
Use the UP/DOWN button to
select ‘ENGLISH’ .
- Select “ORIGINAL” if you want the
default soundtrack language to be
the original language the disc is
recorded in.
ex) Setting up in ENGLISH.
the ENTER button.
5 -Press
ENGLISH is selected and the screen
returns to SETUP MENU.
Using the Subtitle Language
1
2
SETUP MENU
1 Disc Menu
English
2 Audio
English
3 Subtitle
Automatic
4 Parental
Unlocked
Press the SETUP button.
Use the UP/DOWN button to
select SUBTITLE.
5 Audio Options
6 Display Options
Subtitle Language
English
Nederlands
Norsk
Arabiv
Russian
Francais
Oesky
Polski
Chinese
Turkish
Deutsch
Dansk
Portugues
Greek
Automatic
Espanol
Magyar
Suomi
Hindi
Italiano
Svenska
Afrikanns
Japanese
3
4
Press the ENTER button.
Use the UP/DOWN button to
select ‘ENGLISH’.
- Select “AUTOMATIC” if you want the
subtitle language to be the same as
the language selected as the audio
preference.
ex) Setting up in ENGLISH.
5
Press the ENTER button.
- ENGLISH is selected and the
screen returns to SETUP MENU.
NOTE
• If the selected language is not recorded on the disc, the original pre-recorded language is
selected.
• How to make the SETUP MENU disappear or return to menu screen during set
up; Press the RETURN button.
16
P laying
a Disc
Playback
1
2
3
4
Press the OPEN/CLOSE button.
The STANDBY indicator light goes out and the tray opens.
Place a disc gently into the tray with the disc’s label facing up.
Press the PLAY/PAUSE button to start playback.
Press the STOP button to stop playback.
RESUME function
When you stop disc play, the player remembers where you stopped, so when you press
PLAY again, it will pick up where you left off (unless the disc is removed, the STOP button
is pressed twice or the player is unplugged.).
PLAYBACK
NOTE
• If the player is left for 5 minutes in pause mode, it will stop.
• The power is automatically turned off after approximately 30 minutes have elapsed in
the stop mode (auto power-off feature).
• If the player is left in stop mode for more than one minute without any user interaction, a
screen saver will be activated.
• This
icon indicates an invalid button press.
17
P laying
a Disc
1
Stop
Press the STOP button during playback.
2
Remove
Press the OPEN/CLOSE button.
Pause
3 Press
the PLAY/PAUSE or STEP button on the remote during
playback.
- Screen stops, no sound.
- To resume, press the PLAY/PAUSE button once again.
Motion (Except CD)
4 Step
Press the STEP button on the remote during playback.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
- Press PLAY/PAUSE to resume normal playback.
(You can only perform step motion playback in the forward direction.)
Motion (Except CD)
5 Slow
Press the FWD or REV SEARCH button on the remote during
PAUSE or STEP mode.
- By pressing or shuttling, you can select slow motion playback for 1/2, 1/4 or 1/8 of
normal speed.
- No sound is heard during slow mode.
- Press PLAY/PAUSE to resume normal playback.
- When playing a VCD, reverse slow motion playback will not work.
18
S earch
& Skip
Searching a Chapter/Track
Searching is not restricted to within a "chapter" or "track".
Press the FWD or REV SEARCH button on the remote or turn the
SHUTTLE dial on the front of the DVD player during play back.
• Press the REVERSE or FORWARD SEARCH button on the remote and press again to
search at a faster speed(2X/4X/8X/16X/32X/normal speed, in order) on the DVD.
• Press the REVERSE or FORWARD SEARCH button on the remote and press again to
search at a faster speed(2X/4X/8X/normal speed in order) on VCD and CD.
• To return to normal speed playback, press the PLAY/ PAUSE button.
Skipping Tracks
The skip function allows you to "skip" from one chapter another in the forward or reverse
direction.
Press the NEXT SKIP or BACK SKIP button during playback.
NOTE
• When in search mode (4X/8X/16X/32X) on a DVD or high-speed playback on a VCD, no
sound will be heard.
• Depending on the disc, audio may not be heard when a disc is in 2X playback mode.
19
PLAYBACK
• When playing a DVD, if you press the NEXT SKIP button, it moves to the next chapter.
If you press the BACK SKIP button, it moves to the beginning of the chapter. One more
press makes it move to the beginning of the previous chapter.
• When playing a VCD or a CD, if you press the NEXT SKIP button, it moves to the next
track. If you press the BACK SKIP button, it moves to the the beginning of the track.
One more press makes it move to the beginning of the previous track.
A -B
Repeat & 3D Sound
A-B Repeat
The A-B Repeat function lets you mark a segment to repeat between the beginning (A) and
the end (B) of the segment you want to review.
Repeat A ->
Repeat A -> B
1
Press the A-B REPEAT button at the beginning (A) of
the segment you want to
review.
2
Press the A-B REPEAT button again at the end (B) of
the segment you want to
review. The segment will
begin repeating.
3
To clear A-B Repeat, press
the A-B REPEAT button
again.
Repeat A -> B OFF
3D Sound
The simulated surround effect (SPATIALIZER N-2-2) depends on the disc contents. If you
connect the unit to your stereo system, you can enhance sound quality and produce a
greater surround effect. This feature is useful when you are using the DVD player with a
two channel stereo through the analog outputs.
(Discs which are recorded with DTS will not work. When the DIGITAL OUTPUT is set to
BITSTREAM in the SETUP MENU, the 3D Sound function will not work.)
1
Press the DISPLAY button. Use the UP/DOWN or LEFT/RIGHT to
select 3D Sound. Or press the 3D SOUND button on the remote.
(Be sure the DIGITAL OUTPUT is set to PCM.)
2
Use the UP/DOWN button to select the sound you want among
Speakers, Headphones or Off.(on DVD/VCD)
(When playing a CD, you can select On or Off.)
NOTE
• The A-B Repeat function works on the same title or track.
• If the title or track is completed before marking the end (B), the end of the title or track
becomes B automatically.
• Depending on the disc, the A-B Repeat and 3D Sound functions may not work.
• 3D sound will not operate in VLM (Virtual Light Machine) mode.
20
B ookmark
The Bookmark function lets you select parts of a DVD or VCD so that you can quickly find
the section at a later time.
Bookmark
<--->
Press enter to mark
During playback, press the
BOOKMARK button on the
remote. A ‘BOOKMARK’ will
be displayed.
To store a Bookmark
the LEFT/RIGHT button to move to the desired book1 Use
mark.
2
When you reach the scene you want to mark, press the
ENTER button. The icon will change to a number (1, 2, or 3).
3 Press the BOOKMARK button to turn off the display.
PLAYBACK
To recall a Bookmarked scene
1 During playback, press the BOOKMARK button on the remote.
2 Use the LEFT/RIGHT button to select a marked scene.
3 Press the PLAY/PAUSE button to skip to the marked scene.
To clear a Bookmark
During playback, press the BOOKMARK button on the
1 remote.
Use the LEFT/RIGHT button to select the bookmark number
2 you
want to delete.
3
Press the CLEAR button to delete a bookmark number.
Press the BOOKMARK button to turn off display.
NOTE
• Up to three scenes may be marked at the same time.
• Depending on the disc, the Bookmark function may not work.
21
M
ediaMacroT M Zoom & Pan
MediaMacroT M Zoom & Pan
For DVDs, VCDs
This function allows complete control over what part of the picture you want to see. You can
select any portion of the screen and magnify that portion up to 20 times.
the ZOOM button one time, brings up a square frame (Zoom
1 1Pressing
state as shown in the figure above left).
2
Pressing the UP button while in the Zoom 1 state, enables you to
zoom in, and pressing the DOWN button while in the Zoom 1 state
enables you to zoom out.
Pressing the ZOOM button while in the Zoom 1 state, brings up the
3 square
frame with a "cross" (Zoom 2 state as shown in the figure
above right).
the UP/DOWN button while in the Zoom 2 state, allows you
4 Pressing
to traverse the Zoomed picture vertically (screen position reflected by
the horizontal line of the "cross").
the LEFT/RIGHT button while in the Zoom 2 state allows you
5 Pressing
to traverse the Zoomed picture horizontally (screen position reflected
by the vertical line of the "cross").
the ZOOM button one more time (in the Zoom 2 state),
6 Pressing
clears the Zoom function.
NOTE
• Depending on the disc, the MediaMacroTM Zoom & Pan function may not work.
22
A ctionCapture
T M
Strobe & SnapShotT M M o d e
ActionCaptureTM Strobe
This unique strobe function takes snapshots of a continuous motion, then displays
these snapshots in order. This is a useful method of analyzing golf swings, a pianist's
finger movements or even a pitcher's technique.
The screen is divided into fixed 9 subscreens. Press the
button.
p
STROBE
STROBE again.
PLAYBACK
To clear the ActionCaptureTM Strobe, press
p
SnapShotTM Mode
When the SETUP button is pressed in the "pause" mode (when the PAUSE button has
been pressed), a special image processing menu comes up on the screen. This menu
allows you to modify the picture characteristics - Gamma, color, contrast, and brightness of the still image on the screen.
1
Use the UP/DOWN button to
navigate amongst the four
image processing options.
the LEFT/RIGHT button
2 toUsemodify
the setting for each
Gamma
Color
Contrast
Brightness
option.
3
To clear SnapShotTM mode,
press the SETUP button
again.
- Pressing the SETUP button during normal mode will bring up
the setup menu display.
23
A ngleView
Using the
m
T M
Display & Screen Fit
ANGLE button
The DVD-N2000 displays each angle in a portion of the screen, allowing you to select any
angle at the touch of the ergonomic remote.
Check to see if an ‘ANGLE (
)’
mark is present at the upper right
hand corner of the screen.
1
When an ‘ANGLE’ mark is
shown, press the m ANGLE
button.
2
Use the LEFT/RIGHT button
to select the desired screen
angle. Then press the ENTER
button.
Example) If there are 3 angles available
Screen Fit
Press the SCREEN FIT button on the remote or the front panel.
Screen Fit - Off
Screen Fit - On
- Allows you to eliminate the black bars at the top and bottom of the screen when playing
a widescreen(16:9) ratio movie.
- Pressing the SCREEN FIT button when the zoom mode is active will not have any effect
(the black bars, when viewing in letter-box mode, will remain). However, pressing the
ZOOM button when the Screen fit function is active already will enable the Zoom mode.
NOTE
• Depending on the disc, the ActionCaptureTM Strobe and Screen Fit functions may not
work.
• This function does not work when a DVD has not been recorded with a multi-camera
angle system.
24
S electing
the Audio Language
You can select a desired language quickly and easily with the AUDIO button.
Using the AUDIO Button
Audio
English Dolby Digital 5.1
Audio
Stereo
1
2
Press the AUDIO button.
Use the LEFT/RIGHT button
to select the desired language
on a DVD.
- The audio and subtitle languages are
represented by abbreviations.
3
Use the UP/DOWN button to
select Stereo, Right Channel
or Left Channel. (On VCD/CD)
Using the MENU Button
When playing a DVD
AUDIO
2
SUBTITLE
1
ENGLISH
2
FRANCAIS
1
2
3
4
5
Press the MENU button.
Use the UP/DOWN button to
select AUDIO information.
Press the ENTER button.
Use the UP/DOWN button to
select ‘ENGLISH’.
Press the ENTER button.
When playing a VCD/CD
When playing a VCD or CD, the MENU
button will not work.
NOTE
• This function depends on what languages are encoded on the disc and may not work
with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• How to have the same audio language come up whenever you play back
a DVD; Refer to “Setting Up the Language Features” on page 16.
25
PLAYBACK
(example)
1
S electing
the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE Button
Subtitle
Subtitle
Off
On
Korean
Korean
1
2
3
Press the SUBTITLE button.
Use the LEFT/RIGHT button
to select the desired subtitle
language.
Use the UP/DOWN button to
determine whether or not the
subtitle will be displayed.
- Initially, the subtitling will not appear on
screen.
- The audio and subtitle languages are represented by abbreviations.
Using the MENU Button
(example)
1
AUDIO
2
SUBTITLE
1
ENGLISH
2
FRANCAIS
1
2
3
4
5
Press the MENU button.
Use the UP/DOWN button to
select SUBTITLE information.
Press the ENTER button.
Use the UP/DOWN button to
select the desired language.
Press the ENTER button.
When playing a VCD/CD
When playing a VCD or CD, the MENU
button will not work.
NOTE
• This function depends on what languages are encoded on the disc and may not work
with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same audio language come up whenever you play back
a DVD; Refer to “Setting Up the Language Features” on page 16.
26
S pectrum
Analyzer & Gaming
Spectrum Analyzer
Your Extiva player brings audio CDs to life with the aid of stunning visual effects. The first
screen that comes up when playing an audio CD is a Spectrum Analyzer as shown in the
figure (above left). This displays a level meter, the track number and elapsed time for the CD
being played.
VLM
Plasmas
01
Track: 01 Elapsed Time:00:02:55
Pressing the DISPLAY button, brings up the VLM (Virtual Light MachineTM) screen.
There are 12 built-in VLM screens with your Extiva player, and you can select from
10 VLM subscreens by pressing MENU and UP/DOWN or LEFT/RIGHT (as shown
in the figure above right).
- VLM is a series of stunning and incredibly fun visual effects that are 'synchronized' to the
music being played.
- Two of the VLM screens, Random Time and Random Energy, do not have subscreens.
Gaming
the joystick to one of the ports. Insert the game disc in the
1 Connect
tray.
Press the PLAY/PAUSE button to start playback.
2
- Samsung N2000 Joystick button Mapping for DVD, VCD, CDDA playback. Button mapping for Nuon depends on the Nuon disc. Nuon button usage is different from disc to disc.
- Unplugging and replugging a joystick when playing a game may cause program dysfunction. If this occurs, press POWER on the front panel to re-initialize the program.
Joystick Buttons
Start Button
A Button
D-Up Button
D-Down Button
D-Left Button
D-Right Button
C-Up Button
C-Down Button
Remote Buttons
Play/ Pause
Enter
Up
Down
Left
Right
Skip Next
Skip Previous
Joystick Buttons
C-Left Button
C-Right Button
NUON Button
Front Left Button+ N Button
Front Right Button+ N Button
Front Right Button+ N Button
Front Left Button
Remote Buttons
Fast Reverse
Fast Forward
NUON
Display
Setup
Open Disc Tray
(Use Start Button to close tray)
27
SPECIALS
Your Extiva player, in addition to playing DVD movies, VCD and CD-Audio discs, also
supports a wide variety of NUON entertainment and edutainment software titles. NUON
ports on the front panel allow you to plug in a wide variety of NUON peripherals, including
joysticks. There are two NUON ports on the front panel of your Extiva player. To play a
NUON game, you need to connect a NUON joystick to either of these ports (or connect
multiple NUON joysticks - two supported by the ports on the front panel, multiple joystick
support provided via a NUON splitter that connects to these NUON ports) and insert the
NUON game disc in the tray. Depending on the game disc, you may not be able to hear
audio via the digital audio out jack. If this occurs, you must hook up the analog outputs to
hear NUON game disc audio.
U sing
the Display Menu
The unique “SmartMatrixTM user interface” on Screen Display of the DVD-N2000 allows
instant access to both the DVD features and the more advanced PC-like functions. And the
picture is never out of view, as these advanced graphics can be displayed simultaneously
with the DVD images.
1
Audio
English
Dolby Digital 5.1
2
DISPLAY MENU
Title
03 of 0 1
6
SubTitle
On: Korean
Chapter
03 of 02
7
3
Repeat
Off
Time
00:21:02
8
4
5
Repeat A->B
Off
Angle
Off: 1of 1
3D Sound
Off
9
10
Bookmark
<--->
A
• If Audio, Subtitle and Repeat, etc. are selected, they will be highlighted (when playing a
VCD, title/chapter/time/subtitle part is replaced by track/elapsed time/remain
track/remain time.)
• When an item is selected and ENTER is pressed, the item will be displayed in A.
• The A box displays the current status of the item chosen.
1
2
3
4
During playback, press DISPLAY, the display menu appears.
Select the desired item by using the UP/DOWN or LEFT/RIGHT
button. Then press ENTER.
In the A box, you can change desired data.
To make the screen disappear, press DISPLAY again.
1 Audio See page 16.
2 Subtitle See page 16.
3 Repeat
• The Repeat function allows you to repeat a track, title, or all the disc (CD only).
Use to select TITLE, CHAPTER (or TRACK) or OFF.
4 A-B Repeat See page 20.
5 Angle See page 24.
6 Title
• Use to select a title number.
- A DVD may contain several different titles. For example, if a disc contains four
different movies, each might be considered a title.
7 Chapter
• Use to select a chapter number.
- Each Title on a DVD can be divided into chapters (similar to tracks on an audio CD).
8 Time
• Use to enter the time from which you want to start.
9 3D Sound See page 20.
10 Bookmark See page 21.
(The Bookmark function can't be set here but will be displayed in A.)
28
S etting
Up the Disc Language
If you set the disc menu, audio and subtitle language in advance, they will come up
automatically every time you watch a movie.
Using the Disc Menu Language
This function changes the language only for the text on the disc
menu screens.
SETUP MENU
1 Disc Menu
English
2 Audio
English
3 Subtitle
Automatic
4 Parental
Unlocked
1
2
5 Audio Options
6 Display Options
Disc Menu Language
English
Nederlands
Norsk
Arabiv
Russian
Francais
Oesky
Polski
Chinese
Turkish
Deutsch
Dansk
Portugues
Greek
Espanol
Magyar
Suomi
Hindi
ex) Setting up in ENGLISH.
Italiano
Svenska
Afrikanns
Japanese
Press the SETUP button.
Use the UP/DOWN button to
select DISC MENU.
3
Press the ENTER button.
4
Use the UP/DOWN button to
select ‘ENGLISH’ in the submenu.
5
Press the ENTER button.
- ENGLISH is selected and the screen
returns to SETUP MENU.
SPECIALS
NOTE
• For Audio and Subtitle Setup, see page 16.
29
S etting
Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating - which helps you control the types of DVDs that your family watches. There are up to 8
rating levels on a disc.
Setting the Rating Level
1 Press the SETUP button.
the UP/DOWN button
2 Press
to select PARENTAL.
the ENTER button
3 Press
and enter your 4-digit pass-
SETUP MENU
1 Disc Menu
2 Audio
English
English
3 Subtitle
Automatic
4 Parental
Unlocked
5 Audio Options
6 Display Options
word by pressing the 0-9
button.
Parental Control
Rating Level
Change Password
Unlocked Adult (Level 8)
Level 7 Level 6
Level 5 Level 4
Level 3 Level 2
Kid Safe (Level 1)
to the RATING LEVEL
4 Move
by using the UP/DOWN button and press the ENTER
button.
ex) Setting up Level 6.
to LEVEL 6 by using
5 Move
the UP/DOWN or
LEFT/RIGHT button and
then press the ENTER button.
- The disc which contains LEVEL 7 or 8
will now not play.
Changing the Password
1
2
3
SETUP MENU
1 Disc Menu
English
2 Audio
English
3 Subtitle
Automatic
4 Parental
Unlocked
5 Audio Options
6 Display Options
Parental Control
Press the SETUP button.
Press the UP/DOWN button
to select PARENTAL.
Press the ENTER button and
enter your 4-digit password
by pressing the 0-9 button.
- The default password is '9999'.
Rating Level
Change Password
Enter
New Password
----
4
Move to CHANGE PASSWORD by using the
UP/DOWN button and press
the ENTER button.
5
Enter the new password.
- After entering the new password, reenter it one more times to make sure the
password works.
- The Parental Control function is compatible only with parental level encoded
discs.
30
S etting
1 Press the SETUP button.
the UP/DOWN button to
2 Use
select AUDIO OPTIONS.
SETUP MENU
1 Disc Menu
2 Audio
English
English
3 Subtitle
Automatic
4 Parental
Unlocked
Up the Audio Options
5 Audio Options
6 Display Options
Audio Options
Digital Output
LPCM 96 KHz -> 48 KHz
DTS
Dynamic Compression
ANALOG 2X Scan Audio
Speakers Setup
< > PCM / Bitstream
< > Off / On
< > Off / On
< > Off / On
< > Off / On
Press enter to adjust setup
3
4
Then press the ENTER button.
Use the UP/DOWN button to
select the desired item.
Use the LEFT/RIGHT button
to select the desired item.
Then press the ENTER button.
DIGITAL OUTPUT
- PCM : Converts to PCM (2CH) 48KHz/16Bit audio. Select PCM when using the Analog
Audio Outputs. If the unit is set to PCM, speaker setup is changed to 2CH
and the speaker setup can’t be controlled.
- BITSTREAM : Converts to Dolby Digital BITSTREAM (5.1CH). Select BITSTREAM when
using the Digital Audio Output.
LPCM 96 KHz 48 KHz
- For discs recorded with 96 KHz Linear PCM, you must change 96KHZ(Off) to 48KHz(On)
for analog and digital output. PCM won’t be output when it is set to LPCM 96 KHz.
DTS
- ON : Outputs DTS BITSTREAM via digital output only. Select DTS when connecting to a
DTS DECODER.
- OFF : Doesn’t output DTS signal.
DYNAMIC COMPRESSION
- ON : To select dynamic compression.
- OFF : To select the standard range.
ANALOG 2X SCAN AUDIO
- ON : Turns analog 2X scan audio on.
2X Scan Audio does not work when using the digital output.
- OFF : Turns analog 2X scan audio off.
SPEAKER SETUP
- CASE 1 -11 : Use the LEFT/RIGHT button to select the desired speaker setup.
There are 11 different speaker settings to optimize the DVD player to your
audio system.
- Speaker Setup is only available in Bitstream mode.
NOTE
Center Speaker
Left Front
Right Front
Left Rear
Right Rear
Subwoofer
• How to make the SETUP MENU
disappear or return to menu
screen during set up;
Press RETURN button.
• When the Speaker Setup is set to
5.1CH, the voice recorded on a
DVD disc may not be heard if you
are connected to a regular 2
channel stereo. If this occurs, the
following procedure must be
performed:
Select PCM in the Digital Output of
the Audio Options menu. Or, select
CASE1 in the Speaker Setup when
the unit is set to BITSTREAM.
31
S etting
Up the Display Options
SETUP MENU
1 Disc Menu
English
2 Audio
English
3 Subtitle
Automatic
4 Parental
Unlocked
5 Audio Options
6 Display Options
Display Options
TV Aspect
< > wide / Pan & Scan / Letterbox
Front Display < > Auto / Bright / Dim
Black Level < > Off/On
1
2
Press the SETUP button.
3
Use the UP/DOWN button to select the desired item. Then press the
ENTER button.
Use the UP/DOWN button to select DISPLAY OPTIONS. Then press
the ENTER button.
TV ASPECT
Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio) only in stop mode.
FRONT DISPLAY
Adjust the brightness of the unit’s front panel display.
BLACK LEVEL
Adjusts the brightness of the screen.
4
Use the LEFT/RIGHT button to select the desired item. Then press
the ENTER button.
TV ASPECT
- WIDE :
You can view the full 16:9 picture on your widescreen TV.
- PAN-SCAN :
Select this for conventional size TVs when you want to see the central portion of the
16:9 screen. (Extreme left and right side of movie picture will be cut off.)
- LETTER BOX :
Select when you want to see the total 16:9 ratio screen DVD supplies, even though
you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of
the screen.
FRONT DISPLAY
- BRIGHT : Makes the Front Panel Display bright.
- DIM : Makes the Front Panel Display dim.
- AUTO DIM : Makes the Front Panel Display dim automatically when playing a DVD.
BLACK LEVEL
- On : Picture will be lighter than the default black level.
- Off : Picture will display as it is set.
32
R emote
Control Setting
The remote can also be set up to control most TVs. To program the remote, use the code
that corresponds to your brand.
1
2
3
Point the DVD’s remote at
the TV.
While holding the TV
POWER button down, enter
the code for your brand.
- For Samsung A TVs
While holding down the TV button, enter 0.
4
If the TV turns off, setup is
complete.
Enter other codes of the same
brand if the first code does not
work.
5
TV Codes
Turn on the TV.
BRAND
CODE
BRAND
CODE
0
SAMSUNG A
OPEN/CLOSE
MITSUBISHI
1
SHARP B
AUDIO
SAMSUNG B
2
SONY
SUB TITLE
SAMSUNG C
3
MAGNAVOX
DVD POWER
SHARP A
4
SANYO A
ANGLE
ZENITH
5
LG B
TOP MENU
LG C
6
RCA
MENU
DAEWOO
7
LG A
RETURN
SANYO B
8
TOSHIBA
REV SEARCH
EMERSON
9
HITACHI
REPEAT
SHARP C
SETUP
JVC
DISPLAY PANASONIC A
FWD SEARCH SAMSUNG D
BACK SKIP
PANASONIC B
To operate the TV, use the
“TV Function Buttons”
described on page 11.
NOTE
33
SPECIALS
• The remote may not be able to control every model TV of the brands listed.
• Certain audio features of this product manufactured under a license from Desper
Products, Inc. Spatializer® and circle-in-square device are trademarks owned by Desper
Products, Inc.
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby
Laboratories Inc. All rights reserved.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
• VM Labs Legal Notices:
Trademark: “NUONTM” and “VLM” and “Virtual Light MachineTM” are trademarks of VM
Labs. Inc.
Copyright: NUON Mediaware, Copyright ©1995-2000, VM Labs, Inc. All rights reserved.
Patents: This product is covered by one or more claims of certain issued and pending U.S.
Patents and patent applications of VM Labs, Inc. Reverse engineering and disassembly are prohibited.
• HDCD®, High Definition Compatible Digital ® and Pacific MicrosonicsTM are either
registered trademarks or trademarks of Pacific Microsonics, Inc. in the United States
and/or other countries. HDCD system manufactured under license from Pacific
Microsonics, Inc. This product is covered by one or more of the following: In the USA:
5,479,168, 5,638,074, 5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,864,311, 5,872,531,
and in Australia: 669114. Other patents pending.
T roubleshooting
Guide
Before requesting service (troubleshooting)
Problem
Action
Page
No operations can be
performed with remote.
• Check the batteries in the remote. May need replacing.
• Operate the remote control at a distance of no more than 20
feet.
• Remove batteries and hold down one or more buttons for
several minutes to drain the microprocessor inside the
remote to reset it. Reinstall batteries and try remote again.
P6
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
• This player cannot play CD-ROMs, DVD-ROMs, CD-R, etc.
Insert a DVD, a VIDEO-CD or a CD.
P4
Disc does not play.
5.1 channel sound is
not being reproduced.
The
icon appears
on screen.
• 5.1 channel sound is reproduced only when the following
conditions are met :
1)The DVD player is connected with the proper amplifier
2)The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “Dolby 5.1 ch”
mark on the outside.
• Check if your audio system is connected and working properly.
• The features or action cannot be completed at this time
because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search
time that is out of range.
P9, 13
P17, 19-27
Disc Menu doesn’t
appear.
• Check if the disc has a Menu.
Playback mode differs
from the Setup Menu
selection.
• Some of the functions selected in the Setup Menu may not
work properly if the disc is not encoded with the corresponding function.
The screen ratio can’t
be changed.
• The Screen Ratio is fixed on your DVDs.
P32
No audio.
• Make sure you have selected the correct Digital Output in
the Audio Options Menu.
P31
Forgot password
• Press power on from a cold start with no disc in the unit. Press
the STOP and PLAY buttons simultaneously on the front panel
for three seconds. “All setup value will be reset to factory settings. Your player will be shut off.” will appear. Press the SETUP
button on the remote control to select the Parental Mode. The
Parental Mode is now unlocked as indicated on the display.
Press the DOWN button to select Parental. Press ENTER and
the Password Check display will appear. Enter the default password of “9999”. You can now set your rating level and change
your password to a new number.
Will not read disc or
other error message.
• Turn the player off and unplug it to reset the DVD player.
Wait approximately 2 minutes, plug the player back in and
turn it on.
If you experience other
problems.
• Go to the contents and find the section of the instruction
book that contains the explanations regarding the current
problem, and follow the procedure once again.
• If the problem still cannot be solved, please contact your
nearest authorized service center.
34
P25, 26
P16, 29-32
P30
S pecifications
Power Requirements
Power Consumption
General
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
DVD
(DIGITAL VERSATILE DISC)
Disc
CD : 5"
(COMPACT DISC)
CD : 31/2"
(COMPACT DISC)
VCD : 5"
Composite Video
Video
Output
Component Video
S-VIDEO
2 Channel
5.1 Channel
Output Level
Audio
Output
*Frequency Response
*S/N Ratio
*Dynamic Range
*Total Harmonic Distortion
AC 120 V, 60 Hz
21 W
7.5 lbs
W 16.9 in x D 11.0 in x H 3.5 in
+41°F to +95°F
10 % to 75 %
Reading Speed : 11.45 ft/sec
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min
Reading Speed : 3.9 to 4.6 ft/sec
Maximum Play Time : 74 min
Reading Speed : 3.9 to 4.6 ft/sec
Maximum Play Time : 20 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 74 min (Video + Audio)
2 channel : 1.0 Vp-p (75 Ω load)
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
Color Signal : 0.286 Vp-p (75 Ω load)
L(1/L), R(2/R)
F/L, F/R, R/L, R/R, C/T, S/W
Analog : 2 Vrms (1 kHz)
Digital : 1.15 Vp-p
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
110 dB
92 dB
0.003 % (In case of 1 KHz)
*: Nominal specification
REFERENCE
• Samsung Electronics Co., Ltd reserves the right to change the specifications without
notice.
• Weight and dimensions are approximate.
35
READ THIS NOTICE BEFORE YOU OR YOUR CHILD USE ANY VIDEO GAME
A very small portion of the population have a condition which may cause them to experience epileptic seizures or have momentary loss of consciousness when viewing certain kinds of flashing lights or patterns that are commonly present in our daily environment. These persons may experience seizures while watching some kinds of television
pictures or playing certain video games. Players who have not had any previous
seizures may nonetheless have an undetected epileptic condition.
If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g. a seizure or loss of awareness), immediately consult your physician before
using any video games.
We recommend that parents observe their children while they play video games. If you
or your child experience any of the following symptoms: dizziness, altered vision, eye
or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions, DISCONTINUE USE IMMEDIATELY and consult your physician.
FOLLOW THESE PRECAUTIONS WHENEVER USING VIDEO GAMES:
- When using your NUON Interactive DVD player, do not sit or stand too close to the
television screen. Play as far back from the screen as possible.
- Play video games on the smallest available television screen.
- Do not play if you are tired or need sleep.
- Always play in a well lit room.
- Be sure to take a 10 to 15 minute break every hour while playing.
Repetitive Strain Warning
Some people may experience fatigue or discomfort after playing for a long time.
Regardless of how you feel, you should ALWAYS take a 10 to 15 minute break every
hour while playing. If your hands or arms become tired or uncomfortable while playing,
stop and rest. If you continue to experience soreness or discomfort during or after play,
listen to the signals your body is giving you. Stop playing and consult a doctor. Failure
to do so could result in long term injury.
If your hands, wrist or arms have been injured or strained in other activities, use of your
system could aggravate the condition. Before playing, consult a doctor.
Motion Sickness
Samsung Extiva DVD players generate realistic images and 3-D simulations.
While playing or watching certain video images, some people may experience
dizziness, motion sickness or nausea. If you or your child experience any of these
symptoms, discontinue use and play again later.
Projection Television Warning
DO NOT USE WITH A FRONT OR REAR PROJECTION TV
Do not use a front or rear projection television with your NUON Interactive DVD Player.
Your projection television screen may be permanently damaged if video games with
stationery scenes or patterns are played on your projection television. Similar damage
may occur if you place a video game on hold or pause. If you use your projection television with NUON Interactive Software, neither VM Labs nor any of VM Labs' licensees
will be liable for any damage. This situation is not caused by a defect in the DVD player
or NUON games; other fixed or repetitive images may cause similar damage to a projection television. Please contact your TV manufacturer for further information.
36
Warranty (for USA users only)
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS
AMERICA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials
and workmanship for the following limited warranty period:
One (1) Year Parts and Labor
This limited warranty begins on the original date of purchase, and is valid only on products
purchased and used in the United States, and does not include transportation, installation,
removal or reinstallation. Warranty repairs must be performed by SAMSUNG’s authorized
service center. To receive warranty service, the original dated bill of sale must be presented
upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center.
Transportation to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge with new or
reconditioned parts, if found to be defective during the limited warranty period specified
above. The product must be returned during the warranty period with transportation charges
prepaid to SAMSUNG’s designated service center. Prior to returning any product for warranty service, the purchaser must contact SAMSUNG for problem determination and service
procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the product. All replaced parts and products become the property of SAMSUNG and must be
returned to SAMSUNG. Replacement parts and products assume the remaining original
warranty, or ninety (90) days, whichever is longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following,
including, but not limited to: damage which occurs in shipment; applications and uses for
which this product was not intended; failures or problems which are caused by products or
equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect, misapplication,
fire, water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations or
surges; damage caused by improper or faulty installation; improper connection with any
peripheral; product alteration or modification; improper or unauthorized repair; cosmetic
damage or exterior finish; product with altered serial numbers; failure to follow operating
instructions, customer adjustments, maintenance and environmental instructions that are
covered and prescribed in the instruction book; use of non-SAMSUNG or unauthorized
parts, supplies, accessories or equipment which damage this product or result in service
problems; failures or problems due to incompatibility with other equipment.
37
REFERENCE
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND
DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS
WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR
GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO
THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE
LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR
OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT,
REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN
IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR
SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN
THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES
ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE
USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT
CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY
SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS
PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion
or limitation of incidental or consequential damages, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG at:
SAMSUNG ELECTRONICS AMERICA, INC. CONSUMER ELECTRONICS CUSTOMER SERVICE
1 SAMSUNG PLACE, LEDGEWOOD, NJ 07852
Tel: 973-691-6200, Fax: 973-691-6201
1-800-SAMSUNG (1-800-726-7864)
www.sosimple.com
38
Warranty (for Canada users only)
LIMITED WARRANTY TO ORIGINAL PURCHASER
Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective
material and workmanship.
SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will
repair or replace the product at its option.
All warranty repairs must be performed by a SECA Authorized Service Center. (The name
and address of the location nearest you can be obtained by calling toll free: 1- 800- SAMSUNG)
LABOR
PARTS
One year (Carry-in)
One year
On carry-in models, transportation to and from the service center is the customer’s responsibility.
The original dated sales receipt must be retained by the customer and is the only acceptable
proof of purchase. It must be presented to the authorized service center at the time service is
requested.
EXCLUSIONS (WHAT IS NOT COVERED)
This warranty does not cover damage due to accident, fire, flood and/ or other acts of God;
misuse, incorrect line voltage, improper installation, improper or unauthorized repairs, commercial use or damage that occurs in shipping. Exterior and interior finish, lamps, glass are
not covered under this warranty. Customer adjustments which are explained in the instruction
manual are not covered under the terms of this warranty. This warranty will automatically be
voided for any unit found with a missing or altered serial number. This warranty is valid only
on products purchased and used in Canada.
REFERENCE
39