Sharp LCD colour TV Specifications

OPERATION MANUAL
ENGLISH
ԋᙔ⥝㵲
LC-42D65H/LC-46D65H
LC-42D65H
LC-46D65H
ϕをᒝᕊ
ᩮᓩྐ⨓㣌⿏៬
LCD COLOUR TELEVISION
ϕをᒝᕊ
OPERATION MANUAL
Printed in Malaysia
㲬‫׹‬㇛Ռࣇ߱
TINS-E027WJZZ
08P12-MA-NF
4246D65H cover.indd 1
12/1/08 6:10:15 PM
OPERATION MANUAL
ENGLISH
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of
trouble-free operation of your product, please read the Important Safety Precautions carefully before
using this product.
ENGLISH
Contents
Introduction
Dear SHARP customer ................................................................................................ 1
Contents ....................................................................................................................... 1
Important Safety Precautions ..................................................................................... 4
Supplied accessories .................................................................................................. 5
Trademarks .................................................................................................................. 5
Preparation
Attaching the stand ..................................................................................................... 6
Part names ................................................................................................................... 7
TV (Front/Side) ................................................................................................. 7
TV (Rear) ........................................................................................................... 8
Remote control unit.......................................................................................... 9
Before turning on the power ..................................................................................... 10
Connecting external devices .................................................................................... 11
Connecting a VCR, game console or camcorder .......................................... 11
Connecting a DVD player ............................................................................... 11
Connecting a Digital TV Decoder (Set Top Box) ........................................... 12
Connecting a PC ............................................................................................ 12
Using Digital Audio Output ............................................................................ 12
Inserting the batteries ............................................................................................... 13
Using the remote control unit ................................................................................... 13
Cautions regarding the remote control unit ................................................... 13
Turning the TV on/off................................................................................................. 14
Turning on the power ..................................................................................... 14
Turning off the power ..................................................................................... 14
About Menu operations ............................................................................................. 15
What is Menu? ............................................................................................... 15
Basic Menu operations .................................................................................. 15
About Guide Display ...................................................................................... 15
A-TV (Analogue TV)/D-TV (Digital TV)/AV input mode menu items ................ 16
PC input mode menu items ........................................................................... 17
Watching TV
Setting channels automatically ................................................................................ 18
Selecting programmes .............................................................................................. 19
Adjusting the volume ................................................................................................. 19
Menu language settings ............................................................................................ 19
Setting channels to your preference........................................................................ 20
Auto search .................................................................................................... 20
Manual setting for each channel .................................................................... 20
Sorting programmes ...................................................................................... 23
Erasing programmes ...................................................................................... 23
Useful viewing functions ........................................................................................... 24
Split-screen viewing ...................................................................................... 24
Returning to the previously selected channel ................................................ 25
Muting the audio temporarily ......................................................................... 25
Outputting only audio..................................................................................... 25
Switching the analogue audio format ............................................................ 26
1
42D65H_en_a.indd 1
11/25/08 10:32:29 AM
Contents
Watching TV (Continued)
Reducing the start-up time ........................................................................... 26
Password setting for the child lock (for A-TV (Analogue TV)/D-TV (Digital TV)
input mode) ...................................................................................................... 27
Energy conservation settings ................................................................................... 28
Auto power-off at a designated time ............................................................. 28
Auto power-off after the end of broadcast .................................................... 28
Auto power-off when there are no operations performed ............................. 28
Power Management ....................................................................................... 29
Ecology ......................................................................................................... 29
Picture size settings .................................................................................................. 30
Selecting the Wide Screen Signalling (WSS) picture size automatically ........ 30
Selecting the Wide Screen Signalling (WSS) picture size manually ............... 30
Selecting the picture size manually ................................................................ 31
Selecting a preset AV Mode...................................................................................... 32
Manual picture settings............................................................................................. 33
Picture adjustment ......................................................................................... 33
Advanced picture settings ............................................................................. 34
Other picture settings................................................................................................ 35
Adjusting the image position.......................................................................... 35
Game Play Time ............................................................................................ 35
Audio adjustment ....................................................................................................... 36
Output Volume Select ................................................................................... 36
A-TV (Analogue)/D-TV (Digital) buttons ................................................................... 37
Basic adjustment settings (Digital)
Selecting D-TV menu ................................................................................................. 38
D-TV input mode menu items ................................................................................... 38
Electronic Programme Guide (EPG) ......................................................................... 39
Selecting a programme using EPG .......................................................................... 39
Basic operation .............................................................................................. 39
Selecting a programme .................................................................................. 39
Programme Guide ...................................................................................................... 41
INFO ............................................................................................................................ 41
Favourite Programme List ........................................................................................ 41
Programme List ......................................................................................................... 42
Favourite & Lock ............................................................................................ 42
Parental Rate................................................................................................. 42
Installation .................................................................................................................. 43
Auto Search ................................................................................................... 43
Manual Adjust ................................................................................................ 43
Reset Data...................................................................................................... 44
Video Setup .................................................................................................... 44
Digital Output ............................................................................................................. 45
Multilingual ................................................................................................................. 46
Time Setup ................................................................................................................. 46
I-Plate Setup (Information Plate Setup).......................................................... 46
Information ................................................................................................................. 47
OAD Option ................................................................................................................ 47
S/W Update ................................................................................................................ 47
Switching subtitle languages.................................................................................... 47
Text ............................................................................................................................. 47
Settings when using external devices
Settings when using HDMI output devices ............................................................. 48
Selecting the input source and signal type ............................................................ 49
Selecting input source ................................................................................... 49
Selecting input signal type ............................................................................ 49
Labelling input sources ............................................................................................. 50
Skipping HDMI/RGB input ....................................................................................... 50
Colour system settings ............................................................................................. 50
2
42D65H_en_a.indd 2
11/25/08 10:32:31 AM
Contents
AQUOS LINK
Controlling HDMI devices using AQUOS LINK ....................................................... 51
AQUOS LINK connection .......................................................................................... 52
Connecting an AQUOS BD Player via the AQUOS LINK-compatible
audio system ............................................................................................. 52
Connecting an AQUOS BD Player only.......................................................... 52
AQUOS LINK Setup ................................................................................................... 52
AQUOS LINK Auto power on ......................................................................... 52
Selecting recorder .......................................................................................... 53
Operating an AQUOS LINK device ........................................................................... 53
Listening with the AQUOS LINK-compatible audio system ........................... 53
Listening with the AQUOS TV speaker system .............................................. 54
Manually changing the AQUOS LINK-compatible audio system’s sound
mode.......................................................................................................... 54
Calling up the menu of an external device connected with the TV via
HDMI.......................................................................................................... 54
Playback of titles using AQUOS LINK............................................................ 54
Selecting media type for CEC-compatible recorder ...................................... 55
HDMI device selection ................................................................................... 55
Recording via the CEC-compatible recorder's
Electronic Programme Guide (EPG) (only for recorders)............................ 55
Connecting a PC
Displaying a PC image on the screen ...................................................................... 56
Selecting the picture size ............................................................................... 57
Adjusting the PC image automatically ........................................................... 58
Adjusting the PC image manually .................................................................. 58
Input resolution settings ........................................................................................... 59
Selecting the input resolution......................................................................... 59
PC Control of the TV .................................................................................................. 60
PC compatibility chart ............................................................................................... 61
RS-232C commands list ............................................................................................ 61
Appendix
Troubleshooting ......................................................................................................... 62
Troubleshooting-Digital broadcasting ..................................................................... 62
Error messages about recording using AQUOS LINK ........................................... 63
Reset ........................................................................................................................... 64
Identification .............................................................................................................. 64
Specifications............................................................................................................. 65
Optional accessory ................................................................................................... 65
Dimensional drawings ............................................................................................... 66
Mounting the TV on the wall .................................................................................... 67
Removing the stand ...................................................................................... 67
Handling and precautions with the wall-mounted TV ................................... 67
CLEARING THE PASSWORD .................................................................................... 68
3
42D65H_en_a.indd 3
11/25/08 10:32:31 AM
Important Safety Precautions
• Cleaning — Unplug the AC cord
from the AC outlet before cleaning
the product. Use a damp cloth to
clean the product. Do not use liquid
cleaners or aerosol cleaners.
• Water and moisture — Do not use
the product near water, such as
bathtub, washbasin, kitchen sink,
laundry tub, swimming pool and in a
wet basement.
• Do not place vases or any other
water-filled containers on this product.
The water may spill onto the product
causing fire or electric shock.
• Stand — Do not place the product
on an unstable cart, stand, tripod
or table. Doing so can cause the
product to fall, resulting in serious
personal injuries as well as damage
to the product. Use only a cart,
stand, tripod, bracket or table
recommended by the manufacturer
or sold with the product. When
mounting the product on a wall, be
sure to follow the manufacturer’s
instructions. Use only the mounting
hardware recommended by the
manufacturer.
• When relocating the product
placed on a cart, it must be moved
with utmost care. Sudden stops,
excessive force and uneven floor
surface can cause the product to fall
from the cart.
• Ventilation — The vents and other
openings in the cabinet are designed
for ventilation. Do not cover or block
these vents and openings since
insufficient ventilation can cause
overheating and/or shorten the life
of the product. Do not place the
product on a bed, sofa, rug or other
similar surface, since they can block
ventilation openings. This product is
not designed for built-in installation;
do not place the product in an
enclosed place such as a bookcase
or rack, unless proper ventilation
is provided or the manufacturer’s
instructions are followed.
• The LCD panel used in this product
is made of glass. Therefore, it can
break when the product is struck
forcefully or with a sharp object. If
the LCD panel is broken, be careful
not to be injured by broken glass.
• Heat sources — Keep the product
away from heat sources such as
radiators, heaters, stoves and other
heat-generating products (including
amplifiers)
• To prevent fire, never place any type
of candle or naked flames on the
top or near the TV set.
• To prevent fire or shock hazard, do
not place the AC power cord under
the TV set or other heavy items.
• Do not place heavy objects on this
product or stand on it. Doing so
could cause injury if the product
overturns. Take special care near
children and pets.
The LCD panel is a very high technology product
with 2,073,600 pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally
a few non-active pixels may appear on the screen
as a fixed point of blue, green or red.
This is within product specifications and does not
constitute a fault.
Precautions when
transporting the TV
• When transporting the TV, never
carry it by holding or otherwise
putting pressure onto the display.
Be sure to always carry the TV
by two people holding it with two
hands — one hand on each side
of the TV.
• Do not display a still picture for a long time, as this could
cause an afterimage to remain.
• Install the product on the place where the AC cord can
be unplugged easily from the AC outlet, or from the AC
INPUT terminal on the rear of the product.
4
42D65H_en_b.indd 4
11/25/08 10:34:34 AM
Supplied accessories
Make sure the following accessories are provided with the product.
Remote control unit
Used with batteries inserted.
Page 9
“AAA” size battery (g2)
AC cord
Page 13
Always use the AC cord supplied with
the TV.
Page 10
Cable clamp
Stand unit
LC-42D65H
Stand post
Short screws (g4)
Long screws (g4)
For bundling cables.
Stand post
Cloth
Hex key
Put all parts of the stand unit together and then attach it to the TV.
Page 10
Page 6
Operation manual
Stand unit
LC-46D65H
Stand post
Short screws (g4)
Long screws (g4)
Stand post
Hex key
Cloth
Put all parts of the stand unit together and then attach it to the TV.
Page 6
Trademarks
• TruSurround XT, SRS and h® symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
5
42D65H_en_b.indd 5
11/4/08 2:28:33 PM
Preparation
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confirm the 8 screws supplied with the TV.
Short screws (g4)
(used in step 3)
Long screws (g4)
(used in step 2)
3
1 Insert the stand into the openings on the
bottom of the TV.
2 Insert and tighten the 4 short screws into
the 4 holes on the rear of the TV.
Hex key
Short
screw
2
Attach the supporting post for the stand unit
onto the base as shown below.
LC-42D65H
Long screw
Hex
key
LC-46D65H
Soft
cushion
NOTE
• To detach the stand, perform the steps in reverse order.
Long screw
Hex
key
LC-42D65H
15°
15°
CAUTION
• Adjust the screen with both hands. Put one hand on
the TV and rotate the screen while steadying the stand
with your other hand.
The TV can be rotated up to 15 degrees to the right or left.
NOTE
• Angle adjustment is not available with the LC-46D65H.
6
42D65H_en_b.indd 6
11/4/08 2:28:33 PM
Preparation
Part names
TV (Front/Side)
POWER (On/Off) button
MENU button
TV/VIDEO button
Channel up (r)/down (s) buttons
Volume up (e)/down (f) buttons
Remote control sensor
OPC indicator*
OPC sensor
SLEEP timer indicator
POWER indicator**
*OPC: Optical Picture Control (See page 33.)
** See page 14 for the TV status indicator.
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The illustrations used throughout this manual are based on LC-42D65H.
7
42D65H_en_b.indd 7
11/4/08 2:28:34 PM
Preparation
TV (Rear)
RS-232C terminal
INPUT2 (HDMI)
terminal
INPUT1 (HDMI)
terminals
INPUT4 terminals
INPUT7 (PC)
terminals
INPUT3 (HDMI)
terminal
AC INPUT terminal
Headphone jack
INPUT6 terminals
DIGITAL AUDIO OUTPUT terminal
INPUT5 terminals
MONITOR OUT terminals
Antenna input terminal
Regarding the headphone jack
• Use headphones with a stereo mini plug (Ø 3.5 mm).
• Be sure to unplug headphones from the jack when they are not
in use.
• The speakers do not output volume when headphones are
plugged in.
• The “Audio” menu cannot be operated when headphones are
plugged in.
• You can set the volume to different levels for each input source.
Volume display when headphones are plugged in
20
8
42D65H_en_b.indd 8
11/4/08 2:28:35 PM
Preparation
Remote control unit
7
VOLk/VOLl
Set the volume. (See page 19.)
e (Mute)
Mute the sound. (See page 25.)
9 EPG
DTV only : To display EPG (Electronic Programme Guide)
screen. (See page 39 to 40.)
10 INFO
D-TV only : Display the programme information. (See
page 41.)
11 EXIT
Return to the default screen.
12 P&P
Set the split-screen picture mode. Press P&P again to
return to normal view. (See page 24.)
SELECT
To select either screen to be active in split-screen mode.
(See page 24.)
(SUBTITLE)
D-TV only : To toggle the subtitle display. (See page 47.)
8
1
12
2
3
13
4
5
6
7
8
9
10
14
15
16
17
18
19
20
21
11
22
23
WIDE
Change the wide image mode. (See pages 31 and 57.)
FREEZE
Freeze a motion picture on the screen. (See page 24.)
13
14
15
16
24
17
18
19
20
21
1
2
3
4
5
6
POWER (STANDBY/ON)
To switch the power on and off. (See page 14.)
0–9
Set the channel. (See page 19.)
A (Flashback)
Press to return to the previous selected channel or
external input mode. (See page 25.)
TEXT
D-TV only : To display MHEG broadcasts. (See page 47.)
A-TV
Press to access ANALOGUE mode. (See page 37.)
MPX
Select the sound multiplex mode. (See page 26 and 46.)
22
23
24
AV MODE
Select an audio and video setting. (See page 32.)
TV/VIDEO (INPUT SOURCE)
Select an input source. (A-TV, D-TV, INPUT1, INPUT2,
INPUT3, INPUT4, INPUT5, INPUT6, INPUT7 (PC)) (See
pages 11, 24, 48 to 50, 56.)
FAV.
D-TV only : Displays the favourite channel setting. (See
page 41.)
D-TV
D-TV only : Press to access D-TV mode. (See page 37.)
DISPLAY
Display the channel or input information.
CHr/CHs
TV input mode: Select the channel. (See page 19.)
SLEEP
Set the Sleep timer. (See page 28.)
GUIDE
D-TV only : Displays the programme list. (See page 41.)
MENU
Display the menu screen. (See page 15.)
a/b/c/d (Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
RETURN
MENU mode: Return to the previous menu screen. (See
page 15.)
Colour (Red/Green/Yellow/Blue)
D-TV only : The coloured buttons are used to select
correspondingly to the coloured items in the menu
screen. (See page 39 to 40 for details.)
AQUOS LINK buttons
If external equipment such as a AQUOS BD Player
is connected via HDMI cables and is AQUOS LINK
compatible, you can use these AQUOS LINK buttons. (See
pages 51 to 55 for details.)
9
42D65H_en_b.indd 9
11/25/08 8:54:28 AM
Preparation
Before turning on the power
Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC cord.
1
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for coaxial cable.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
Antenna cable
(commercially available)
Room antenna terminal
(75-ohm type)
To antenna
terminal
2
Connecting external devices
See pages 11 to 12 for connecting external equipment, such as a VCR and DVD player.
3
Connecting the AC cord
TV (rear view)
AC outlet
AC cord
• Place the TV close to the AC outlet, and keep the power plug within reach.
• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.
4
Bundling the cables
Insert the cable clamp in the hole on the TV as shown.
Cable clamp
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
10
42D65H_en_b.indd 10
11/4/08 2:28:36 PM
Preparation
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV Decoder (Set Top Box) and PC. To view external source images, select the input source from
TV/VIDEO on the remote control unit or TV/VIDEO on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV Decoder (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected using
the INPUT4 or INPUT5/INPUT6 terminals.
When using component cable
(commercially available)
When using composite cable or
S-VIDEO cable (commercially available)
VCR/
Game console/
Camcorder
PB PR
Y (CB) (CR)
S-VIDEO
R – AUDIO – L
or
VIDEO
L
AUDIO
R
VCR/
Game console/
Camcorder
Connecting a DVD player
You can use the INPUT1/INPUT2/INPUT3 (HDMI), INPUT4 or INPUT5/INPUT6 terminals when connecting to a
DVD player and other audiovisual equipment.
NOTE
• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT1. (See page 48.)
When using HDMI cable
(commercially available)
When using component cable
(commercially available)
DVD player
PB PR
Y (CB) (CR)
DVD player
R – AUDIO – L
Ø 3.5 mm stereo mini jack
11
42D65H_en_b.indd 11
11/25/08 10:36:53 AM
Preparation
Connecting a Digital TV Decoder (Set Top Box)
You can use the INPUT1/INPUT2/ INPUT3 (HDMI) or INPUT5/INPUT6 terminals when connecting to a Digital TV
Decoder (Set Top Box) and other audiovisual equipment.
NOTE
• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT1. (See page 48.)
When using HDMI cable
(commercially available)
When using component cable
(commercially available)
Digital TV Decoder
(Set Top Box)
PB PR
Y (CB) (CR)
Digital TV Decoder
(Set Top Box)
R – AUDIO – L
Ø 3.5 mm
stereo mini jack
Connecting a PC
You can use the INPUT7 (PC) terminal when
connecting to a PC. (See page 56.)
Using Digital Audio Output
It is possible to output audio through the DIGITAL
AUDIO OUTPUT terminal. PCM audio outputs from the
terminal.
ANALOG
RGB
Optical fibre cable
(commercially available)
AUDIO
(R/L)
PC
To optical digital input of external audio devices
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the
same audio from the speakers. (The audio of the content
you are viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output
some signals, depending on devices and software.
12
42D65H_en_b.indd 12
11/25/08 10:36:55 AM
Preparation
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
1 Open the battery cover.
2 Insert the two supplied “AAA” size 3 Close the battery cover.
batteries.
• Place batteries with their terminals
corresponding to the (e) and (f)
indications in the battery compartment.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Using the remote control unit
Use the remote control unit by pointing it towards the
remote sensor window.
Objects between the remote control unit and sensor
window may prevent proper operation.
30º
5m
30º
30º
Remote control sensor
30º
Cautions regarding the remote control unit
• Do not subject the remote control unit to shock.
In addition, do not soak the remote control unit with liquids or place it in
an area with high humidity.
• Do not install or place the remote control unit under direct sunlight.
The heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote sensor
window of the TV is under direct sunlight or strong lighting. In such
cases, change the angle of the lighting or TV, or operate the remote
control unit closer to the remote sensor window.
13
42D65H_en_b.indd 13
11/4/08 2:28:37 PM
Preparation
Turning the TV on/off
Turning on the power
Turning off the power
Press POWER on the TV.
• POWER indicator (Green): The TV is on. (After a few
seconds, an image appears with sound.)
• After turning the power “ON” by pressing POWER on the
TV, you can turn the power ON/OFF by pressing POWER
on the remote control.
POWER button
POWER button
Press POWER on the remote control.
• The TV enters standby mode and the image on the screen
disappears.
• The POWER indicator on the TV changes from green to
red.
Press POWER on the TV.
• The POWER indicator on the TV turns off.
• When the TV is turned off by POWER on the TV, you
cannot turn on the power by pressing POWER on the
remote control.
POWER indicator
Light off
Power off
Lighted (Red)
The TV is in standby mode.
Lighted (Green)
The TV is on.
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby
mode.
POWER indicator
14
42D65H_en_c.indd 14
10/29/08 8:24:38 AM
Preparation
About Menu operations
H Using the control panel of the TV
What is Menu?
• You need to bring up the On-Screen Display to perform
settings for the TV. The On-Screen Display for the settings
is called “Menu”.
• The Menu enables various settings and adjustments. (See
pages 16 and 17.)
• The Menu can be operated with the remote control unit.
You can also operate the Menu using the control panel
of the TV.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
Basic Menu operations
1
Press MENU and the MENU screen displays.
MENU
[Picture]
Picture
Audio
AV Mode
Power Control
Setup
[STANDARD]
OPC
[Off]
Backlight
[ +16] –16
Contrast
[ +30]
Brightness
+16
0
40
[
0] –30
+30
Colour
[
0] –30
+30
Tint
[
0] –30
+30
Sharpness
[
0] –10
+10
Advanced
Reset
2
Press c/d to select the desired menu, and
then press ENTER.
Audio
Remote control buttons
TV/VIDEO
ENTER
CH r
a
CH s
b
VOL k
d
VOL l
c
Power Control
STANDARD
Treble
[
0] –15
+15
Bass
[
0] –15
+15
Balance
[
0] L
R
SRS TS XT
[Off]
Bass Enhancer
[On]
Reset
3
TV control panel buttons
NOTE
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
About Guide Display
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
Audio
The Guide Display at the bottom of the screen shows
operations with an On-Screen Display.
Power Control
STANDARD
Treble
[
0] –15
+15
Bass
[
0] –15
+15
0] L
R
Balance
[
SRS TS XT
[Off]
Bass Enhancer
[On]
Reset
4
5
Press a/b or c/d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
: Select
ENTER
: Enter
RETURN
: Back
MENU
: End
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
Press EXIT or MENU to exit the MENU.
Press RETURN as necessary to return to the
previous MENUs.
15
42D65H_en_c.indd 15
10/29/08 8:24:40 AM
Preparation
A-TV (Analogue TV)/D-TV (Digital TV)/AV input mode menu items
List of A-TV (Analogue TV)/D-TV (Digital TV)/AV menu items to help you with operations
Setup
Picture
AV Mode ..................................................................... Page 32
OPC ............................................................................. Page 33
Backlight .................................................................... Page 33
Contrast ...................................................................... Page 33
Brightness .................................................................. Page 33
Colour ......................................................................... Page 33
Tint .............................................................................. Page 33
Sharpness .................................................................. Page 33
Advanced
Colour Temp. .................................................. Page 34
Film Mode . ...................................................... Page 34
Black ............................................................... Page 34
3D-Y/C ............................................................ Page 34
Monochrome .................................................. Page 34
DNR ................................................................. Page 34
Reset ........................................................................... Page 33
Auto Installation ......................................................... Page 18
Programme Setup .............................................. Pages 20-23
Child Lock .................................................................. Page 27
Input Skip ................................................................... Page 50
Input Label ................................................................. Page 50
Position ....................................................................... Page 35
HDMI Auto View ......................................................... Page 48
WSS ............................................................................ Page 30
4:3 Mode ..................................................................... Page 30
Standby Mode ............................................................ Page 26
Language .................................................................... Page 19
Identification .............................................................. Page 64
Reset ........................................................................... Page 64
Option
Audio
AV Mode ..................................................................... Page 32
Treble .......................................................................... Page 36
Bass ............................................................................ Page 36
Balance ....................................................................... Page 36
SRS TS XT .................................................................. Page 36
Bass Enhancer ........................................................... Page 36
Reset ........................................................................... Page 36
AQUOS LINK Setup .................................................... Page 51
D-TV Menu .................................................................. Page 38
Input Select
INPUT4 ............................................................ Page 49
INPUT5 ............................................................ Page 49
INPUT6 ............................................................ Page 49
HDMI Audio Select .................................................... Page 48
Output Volume Select ............................................... Page 36
Audio Only .................................................................. Page 25
Game Play Time ......................................................... Page 35
Colour System ........................................................... Page 50
Power Control
No Signal Off .............................................................. Page 28
No Operation Off ....................................................... Page 28
Ecology ....................................................................... Page 29
NOTE
• Some menu items may not be displayed depending on the selected input source.
16
42D65H_en_c.indd 16
11/25/08 9:06:11 AM
Preparation
PC input mode menu items
List of PC menu items to help you with operations
Setup
Picture
AV Mode ..................................................................... Page 32
OPC ............................................................................. Page 33
Backlight .................................................................... Page 33
Contrast ...................................................................... Page 33
Brightness .................................................................. Page 33
Advanced
Colour Temp. .................................................. Page 34
Reset ........................................................................... Page 33
Input Skip ................................................................... Page 50
Input Label ................................................................. Page 50
Standby Mode ............................................................ Page 26
Language .................................................................... Page 19
Reset ........................................................................... Page 64
Option
Audio
AV Mode ..................................................................... Page 32
Treble .......................................................................... Page 36
Bass ............................................................................ Page 36
Balance ....................................................................... Page 36
SRS TS XT .................................................................. Page 36
Bass Enhancer ........................................................... Page 36
Reset ........................................................................... Page 36
Power Control
AQUOS LINK Setup .................................................... Page 51
Input Select
INPUT4 ............................................................ Page 49
INPUT5 ............................................................ Page 49
INPUT6 ............................................................ Page 49
Output Volume Select ............................................... Page 36
Audio Only .................................................................. Page 25
Fine Sync.
Input Signal ..................................................... Page 59
Auto Sync. ...................................................... Page 58
H-Position ....................................................... Page 58
V-Position ....................................................... Page 58
Clock ............................................................... Page 58
Phase .............................................................. Page 58
Reset ............................................................... Page 58
Power Management .................................................. Page 29
No Operation Off ....................................................... Page 28
Ecology ....................................................................... Page 29
NOTE
• Some menu items may not be displayed depending on the selected input source.
17
42D65H_en_c.indd 17
10/29/08 8:24:42 AM
Watching TV
Setting channels automatically
You can run auto installation again, even after setting
up the preset channels.
4
If you have already set the password, enter it
here.
• See page 27 for setting a password.
5
6
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Auto Installation”, and
then press ENTER.
MENU
Press c/d to select “Yes”, and then press
ENTER.
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Press a/b to select the desired sound
system, and then press ENTER.
You do not need to do anything during the
auto search.
Press MENU to exit.
[Setup ... Auto Installation]
Setup
Option
Auto Installation
Programme Setup
Child Lock
Input Skip
Input Label
Position
HDMI Auto View
WSS
4:3 Mode
[Off]
[Panorama]
Standby Mode
[Mode1]
Language
[English]
Identification
Reset
18
42D65H_en_c.indd 18
11/6/08 4:21:16 PM
Watching TV
Selecting programmes
Adjusting the volume
You can change channels in several ways.
Using CHr/s on the remote control unit
• Press CHr to increase the channel number.
• Press CHs to decrease the channel number.
NOTE
• CHr/s on the TV operates the same as CHr/s on
the remote control unit.
Changing the volume
You can change the volume on the TV or on the
remote control unit.
• To increase the volume, press VOLk.
• To decrease the volume, press VOLl.
Using 0 — 9 on the remote control unit
Select the channels directly by pressing buttons 0 to 9.
20
NOTE
• “A-TV”, “D-TV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4”,
“INPUT5”, “INPUT6” and “INPUT7” (PC) modes can store
volume adjustment values separately.
Menu language settings
a
To select a 1-digit channel (e.g. channel 2):
• Press 0, followed by 2.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
You can also select a language from setup menu.
Select from among 4 languages: English, Simplified
Chinese, Traditional Chinese and Arabic.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Language”, and then
press ENTER.
4
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Channel display
(Example)
A-TV
PAL
SAT.1
12
I
MONO
NOTE
• In D-TV (Digital TV) mode, Arabic language cannot be
selected.
19
42D65H_en_c.indd 19
11/25/08 9:07:04 AM
Watching TV
Setting channels to your preference
You can run the auto search procedure again at any
time by accessing the Setup menu and Programme
Setup. Channels can be tuned automatically or
manually.
Auto search
Manual setting for each channel
You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
1
2
3
You can set some channel items manually. They are
Search, Fine (TV frequency), Colour System, Sound
System, Label (Network name), Skip and Lock (Child
Lock).
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “Programme Setup”, and
then press ENTER.
If you have already set the password, enter it
here.
3
• See page 27 for setting a password.
MENU
Option
Press c/d to select “Setup”.
Press a/b to select “Programme Setup”, and
then press ENTER.
If you have already set the password, enter it
here.
• See page 27 for setting a password.
[Setup ... Programme Setup]
Setup
Press MENU and the MENU screen displays.
4
Press a/b to select “Manual Adjust”, and
then press ENTER.
5
Press c/d to select “Yes”, and then press
ENTER.
Auto Installation
Programme Setup
Child Lock
Input Skip
Programme Setup “Manual Adjust” menu
Input Label
Please select channel to be edited
Position
HDMI Auto View
WSS
4:3 Mode
Standby Mode
Language
[Off]
[Panorama]
[Mode1]
[English]
01 SAT.1
02 PR07
03 KABEL
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
Next
Identification
Reset
4
Press a/b to select “Auto Search”, and then
press ENTER.
5
Press c/d to select “Yes”, and then press
ENTER.
Press a/b to select the desired sound
system, and then press ENTER.
Press MENU to exit.
You can select one of the following settings.
1
2
3
4
5
6
7
Search (See page 21.)
Fine (See page 21.)
Colour System (See page 21.)
Sound System (See page 21.)
Label (See page 22.)
Skip (See page 22.)
Lock (See page 22.)
20
42D65H_en_c.indd 20
11/6/08 4:21:29 PM
Watching TV
Manual setting for each channel (continued)
Search tuning
1
Colour System
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
1
• The selected channel information displays.
• The selected channel information displays.
2
Press a/b to select “Search”, and then press
ENTER.
MENU
2
Colour System menu
Search
Channel frequency settings
Fine
Sound System
Label
Press a/b to select “Colour System” and
then press ENTER.
• Receivable colour systems are listed.
[Setup ... Programme Setup]
Colour System
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
179.25
Search
MHz
[Auto]
[I]
[SAT.1]
Skip
[Off]
Lock
[Off]
Colour system settings
Fine
Next
Store
[Auto]
Sound System
[I]
Label
Cancel
Auto
Colour System
[SAT.1]
PAL
SECAM
Skip
[Off]
NTSC 3.58
Lock
[Off]
NTSC 4.43
PAL-60
3
Press a/b to select item and press ENTER.
• Next: Search the next channel.
• Store: Memorise the current display channel.
• Cancel: Return to the previous screen.
(The search result will not be stored.)
Fine tuning
1
3
Sound System (Broadcasting system)
1
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select “Fine”, and then press
ENTER.
3
Press c/d to adjust the frequency, and then
press ENTER.
2
Colour System
Sound System
Label
179.25
Press a/b to select “Sound System”, and
then press ENTER.
• Receivable sound systems (Broadcasting
systems) are listed.
Sound System menu
Search
Sound system settings
Fine
MHz
B/G
Colour System
[Auto]
Sound System
[I]
Label
Channel frequency settings
Fine
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
• Adjust while checking the background picture as
a reference.
Search
Press a/b to select the optimum colour
system, and then press ENTER.
[SAT.1]
Skip
[Off]
Lock
[Off]
D/K
I
M
[Auto]
[I]
[SAT.1]
Skip
[Off]
Lock
[Off]
• Instead of the method above, you can also set
by directly entering the frequency number of the
channel with 0 — 9.
• When setting a frequency on the “Fine” screen,
the last figure of the frequency needs to be “0” or
“5”.
a
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.
3
Press a/b to select the optimum sound
system, and then press ENTER.
NOTE
• Check the sound system if the sound output were not
correct.
21
42D65H_en_c.indd 21
10/29/08 8:24:46 AM
Watching TV
Manual setting for each channel (continued)
Labelling channels
When a TV channel sends its Network Name, the auto
installation detects the information and assigns a name
to it. However, you can change individual channel
names.
1
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
2
Setting the child lock
You can block the viewing of any channel.
1
• The selected channel information will be displayed.
2
Lock menu
Search
• The alphabet and numbers are listed.
Sound System
[I]
Label
3
4
On
Colour System
[Auto]
Sound System
[I]
Label
Broadcasting station name settings
Fine
[Auto]
Applies child lock to this channel
Fine
Labelling menu
Colour System
Press a/b to select “Lock”, and then press
ENTER.
• Child lock menu will be displayed.
Press a/b to select “Label”, and then press
ENTER.
Search
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
Off
[SAT.1]
Skip
[Off]
Lock
[Off]
A B C D E F G H I J CLEAR
K L M N O P Q R S T BACK
[SAT.1]
Skip
[Off]
U VWX Y Z + - . _
Lock
[Off]
0 1 2 3 4 5 6 7 8 9
END
Press a/b/c/d to select each character of
the new name for the channel, and then press
ENTER.
Repeat until the name is fully spelt out.
• The name can be 5 characters or less.
• When you want to set a channel name of less
than 5 characters, select “END”.
3
Press a/b to set “Lock” to “On”, and then
press ENTER.
NOTE
• See page 27 for setting a password.
• If “Lock” is set to “On” for a channel, “Child lock has been
activated” is displayed when you select the channel, and
the image and sound of the channel is blocked.
• When pressing ENTER while “Child lock has been
activated” is displayed, password input menu will be
displayed. Inputting the correct password lifts the child lock
temporarily until the power is turned off.
Skipping channels
Channels with “Skip” set to “On” are passed over
when using CHr/s even if selected while watching
the image from the TV.
1
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information will be displayed.
2
Press a/b to select “Skip”, and then press
ENTER.
• Skip menu displays.
Skip menu
Search
Channel skip settings
Fine
[Auto]
Sound System
[I]
Label
3
On
Colour System
Off
[SAT.1]
Skip
[Off]
Lock
[Off]
Press a/b to set “Skip” to “On”, and then
press ENTER.
22
42D65H_en_c.indd 22
11/4/08 2:47:59 PM
Watching TV
Sorting programmes
Erasing programmes
Channel positions can be sorted freely.
The individual programme can be erased.
1
Press MENU and the MENU screen displays.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
2
Press c/d to select “Setup”.
3
Press a/b to select “Programme Setup”, and
then press ENTER.
If you already set the password, enter it here.
3
Press a/b to select “Programme Setup”, and
then press ENTER.
If you already set the password, enter it here.
• See page 27 for setting a password.
• See page 27 for setting a password.
4
Press a/b to select “Sort”, and then press
ENTER.
4
Press a/b to select “Erase Programme”, and
then press ENTER.
5
Press c/d to select “Yes”, and then press
ENTER.
5
Press c/d to select “Yes”, and then press
ENTER.
6
Press a/b/c/d to select the channel you
want to move, and then press ENTER.
6
Press a/b/c/d to select the channel you
want to erase, and then press ENTER.
7
Move it to the desired position by pressing
a/b/c/d, and then press ENTER.
7
Press ENTER to erase the channel.
All the subsequent programmes move up.
8
Repeat the steps 6 and 7 until all desired
channels are sorted.
8
Repeat the steps 6 and 7 until all desired
channels are erased.
Erase programme menus
Sort menus
Please select channel to erase
Please select channel to replace
01 SAT.1
01 SAT.1
01 SAT.1
02 KABEL
03
04
05
01 SAT.1
02 PRO7
03 KABEL
04
05
06
07
08
09
10
06
07
08
09
10
11
12
13
14
15
11
12
13
14
15
16
17
18
19
20
16
17
18
19
20
Next
Next
Please select channel to replace
Please select channel to erase
02 KABEL
01 SAT.1
02 PRO7
01 SAT.1
02 KABEL
03
04
05
01 SAT.1
02 PRO7
03 KABEL
04
05
06
07
08
09
10
06
07
08
09
10
11
12
13
14
15
11
12
13
14
15
16
17
18
19
20
16
17
18
19
20
Next
Next
Please select channel to replace
Please select channel to erase
02 KABEL
01 KABEL
01 KABEL
02 SAT.1
03
04
05
01 SAT.1
02 KABEL
03
04
05
06
07
08
09
10
06
07
08
09
10
11
12
13
14
15
11
12
13
14
15
16
17
18
19
20
16
17
18
19
20
Next
Next
23
42D65H_en_c.indd 23
10/29/08 8:24:48 AM
Watching TV
Useful viewing functions
Split-screen viewing
This function is conveniently used when, for instance,
watching cooking programmes and taking notes.
Picture and still image
You can freeze a motion picture on the Display.
Split-screen
You can display two pictures except when inputting
from the RS-232C or PC INPUT terminal.
1
1
2
Press P&P.
• A moving image displays on the left screen and
a still image displays on the right screen. The still
image is one frame captured from a moving image
at the moment you press FREEZE.
• Split-screen displays and a selected input source
image displays.
Press SELECT to set either screen to be
active.
FREEZE
• “z” displays on the active screen, which has
sound output.
3
Press FREEZE.
Press TV/VIDEO to select another input
source on the active screen.
(Example)
2
Reshoot the still image by pressing ENTER.
3
Press RETURN to exit still image.
• Each time you press ENTER, the image on the
right screen updates.
• A selected image displays.
4
•
•
•
•
Press P&P to exit split-screen.
NOTE
This function does not work under the following input
conditions:
1 Two pictures from the same source (e.g. INPUT1 and
INPUT1),
2 Two pictures with different vertical frequency (e.g. PAL
and PAL-60, PAL (50 Hz) and NTSC (60 Hz))
When you press P&P, the current input is moved to the left
side screen display, and the other input appears on the
right side screen display.
When you cannot acquire split-screen capability, perform
the operation below.
— Select another input whose vertical frequency is same
as one of the current inputs (e.g. PAL and PAL).
When this function is not available, “No dual screen display
available.” will display.
Split-screen function is only applicable with combination of
“HDMI input” and “other type inputs (except PC input)” or
“HDMI input” and “TV input”.
NOTE
• The still image automatically goes out after 30 minutes.
24
42D65H_en_c.indd 24
11/25/08 5:19:27 PM
Watching TV
Returning to the previously selected
channel
Press A to switch the currently tuned channel to the
previously tuned channel.
Press A again to switch back to the currently tuned
channel.
Press A to toggle between the currently selected
input source and the previously selected one.
Muting the audio temporarily
Using Mute (e) on the remote control unit
e mutes the current sound output.
1
Press e.
2
Press e again within 30 minutes to cancel the
mute.
• The sound is silenced.
• “M” is displayed while the mute function is on.
Mute
Outputting only audio
When listening to music from a music programme, you
can set the display off and enjoy audio only.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Audio Only”, and then
press ENTER.
4
Press c/d to select “On”, and then press
ENTER.
Selected item
Description
On
Audio is output without screen image.
Off
Both screen images and audio are output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio Only
function is set to “Off”.
• Before 30 minutes, the volume level returns to the
previous setting.
NOTE
• Mute will be cancelled after 30 minutes. However,
the TV will not suddenly output loud sound as the
volume level will be set to 0 automatically. Increase
the volume level by pressing VOLk.
25
42D65H_en_d.indd 25
10/29/08 8:25:23 AM
Watching TV
Switching the analogue audio format
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
When receiving a bilingual signal
Each time you press MPX, the mode switches among
CH A, CH B and CH AB.
Bilingual mode
A-TV
PAL
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between NICAM STEREO and MONO.
A-TV
PAL
NICAM
I
STEREO
A-TV
PAL
I
CH A
PAL
PAL
BBC2
99
PAL
Bilingual mode
A-TV
A-TV
BBC2
99
PAL
NICAM
I
CH A
PAL
NICAM
I
CH B
A-TV
BBC2
99
A-TV
BBC2
99
PAL
I
MONO
PAL
NICAM
I
CH AB
When receiving a monaural signal
Each time you press MPX, the mode switches
between NICAM MONO and MONO.
BBC2
99
I
CH AB
Monaural mode
A-TV
BBC2
99
I
CH B
When receiving a monaural signal
When you press MPX, “MONO” displays.
I
MONO
When receiving a bilingual signal
Each time you press MPX, the mode switches among
NICAM CH A, NICAM CH B, NICAM CH AB and
MONO.
BBC2
99
A-TV
A-TV
Stereo mode
BBC2
99
BBC2
99
BBC2
99
I
MONO
NOTE
• “BBC2” and “99” are tentative network name and channel.
Reducing the start-up time
You can reduce the TV's start-up time after the turning
on the power with the remote control unit.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Standby Mode”, and
then press ENTER.
4
Press c/d to select “Mode1” or “Mode2”,
and then press ENTER.
Monaural mode
A-TV
PAL
NICAM
BBC2
99
I
MONO
A-TV
PAL
BBC2
99
I
MONO
Selected item
In the TV mode of A2 TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between STEREO and MONO.
Description
Mode1
Starting the TV is quick from standby.
Mode2
Power consumption is small during
standby.
5
Press MENU to exit.
Stereo mode
A-TV
PAL
BBC2
99
I
STEREO
A-TV
PAL
BBC2
99
I
MONO
26
42D65H_en_d.indd 26
10/29/08 8:25:26 AM
Watching TV
Password setting for the child lock
(for A-TV (Analogue TV)/D-TV (Digital TV)
input mode)
Allows you to use a password to protect certain
settings from being accidentally changed.
Clearing the password
Allows you to clear your password.
1
Repeat steps 1 to 4 in Setting a password.
2
Press a/b to select “Clear password”, and
then press ENTER.
3
Press c/d to select “Yes”, and then press
ENTER.
Clear password
Change password
Clear password
Setting a password
Register a 4-digit password number to use the Child
Lock function.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Child Lock”, and then
press ENTER.
4
If you already set the password, enter it here.
5
Press a/b to select “Change password”, and
then press ENTER.
Change password
Yes
No
NOTE
• As a precautionary measure, make a note of your
password on the back of this operation manual, cut
it out and keep it in a safe place that children cannot
reach.
• This function is only available for A-TV/D-TV input mode.
• To relock a channel which has been temporarily unlocked
by inputting the correct password, turn power off and then
on again.
Change password
Clear password
New Password
Reconfirm
6
Enter the 4-digit number as a password using
0 — 9.
Change password
Enter your new password. Use 4 digits
Clear password
New Password
Reconfirm
7
Enter the same 4-digit number as in step 6 to
confirm.
NOTE
• To view a locked channel (Lock setting in Programme
Setup “Manual Adjust” is set to “On”), you must enter
a password. (See page 22.) When you select a locked
channel, a password prompt message pops up.
• Press ENTER to display the password input window.
42D65H_en_d.indd 27
27
11/25/08 9:15:43 AM
Watching TV
Energy conservation settings
Auto power-off at a designated time
This function is conveniently used when, for instance,
going to bed while watching TV.
Auto power-off after the end of broadcast
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving
no programme signals, such as the end of a broadcast
day.
1
1
Press SLEEP.
• Remaining time displays when sleep timer has
been set.
2
Each time you press SLEEP, the remaining
time switches as shown below.
0hr. 30min.
Off
1hr. 00min.
2hr. 30min.
Press a/b to select “No Signal Off”, and then
press ENTER.
4
Press c/d to select “Enable”.
1hr. 30min.
2hr. 00min.
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select “Off” by pressing SLEEP to cancel the sleep timer.
Press c/d to select “Power Control”.
3
Sleep timer: Remain 2hr. 00min.
2
Press MENU and the MENU screen displays.
• Five minutes before the power shuts down, the
remaining time displays every minute.
NOTE
• “Disable” is the factory preset value.
• When a TV programme finishes, and the TV receives signal
input, this function may not operate.
• In D-TV mode, "No Signal Off" cannot be selected.
Auto power-off when there are no
operations performed
You can set the TV to automatically power off when no
TV operation is performed for more than 3 hours.
1
2
Press MENU and the MENU screen displays.
Press c/d to select “Power Control”.
3
Press a/b to select “No Operation Off”, and
then press ENTER.
4
Press a/b to select “30min.” or “3hr.”.
• Five minutes before the power shuts down, the
remaining time displays every minute.
NOTE
• “Disable” is the factory preset value.
28
42D65H_en_d.indd 28
10/29/08 8:25:28 AM
Watching TV
Power Management
Ecology
You can set the TV to automatically power off when no
image is displayed on PC.
1
2
3
4
Press MENU and the MENU screen displays.
Press c/d to select “Power Control”.
Press a/b to select “Power Management”,
and then press ENTER.
Press a/b to select “Mode1” or “Mode2”,
and then press ENTER.
Power saving mode settings
Off
Mode1
When set to “Yes”, the TV activates the following
power saving mode.
•
•
•
•
•
“OPC” set to “On” (Page 33)
“Standby Mode” set to “Mode2” (Page 26)
“No Signal Off” set to “Enable” (Page 28)
“No Operation Off” set to “3hr.” (Page 28)
“Power Management” set to “Mode1” (Page 29)
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Power Control”.
3
Press a/b to select “Ecology”, and then
press ENTER.
4
Press c/d to select “Yes”, and then press
ENTER.
Mode2
NOTE
• Ecology mode cannot be deactivated by selecting “No”.
Each setting must be changed individually to deactivate
Ecology mode.
Selected item
Description
Off
• No power management
• Factory preset value.
Mode1
• If no signal inputs for approximately 8
minutes, the power shuts down.
• Even if you start using the PC and the
signal inputs again, the TV stays off.
• The TV turns on again by pressing
POWER. (See page 14.)
Mode2
• If no signal inputs for approximately 8
seconds, the power shuts down.
• When you start using the PC and the
signal inputs again, the TV turns on.
• The TV turns on again by pressing
POWER. (See page 14.)
NOTE
• If you turn off the power by disconnecting AC cord when
setting “Mode2” in Power Management, the TV may not
function properly after turning the power on again. In such
case, press POWER on the remote control unit.
• Pressing POWER on the display will have the same result.
29
42D65H_en_d.indd 29
10/29/08 8:25:29 AM
Watching TV
Picture size settings
Selecting the Wide Screen Signalling
(WSS) picture size automatically
WSS allows a television to switch automatically among
the different screen formats.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
4
Selecting the Wide Screen Signalling
(WSS) picture size manually
The WSS signal has 4:3 auto-switching that allows you
to select between Panorama and Normal.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
Press a/b to select “WSS”, and then press
ENTER.
3
Press a/b to select “4:3 Mode”, and then
press ENTER.
Press c/d to select “On” or “Off”, and then
press ENTER.
4
Press c/d to select “Panorama” or “Normal”,
and then press ENTER.
NOTE
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled.
WSS signal 4:3 screen
4:3 mode “Panorama”
Selected item
4:3 mode “Normal”
Description
Panorama
Wide image without side bars
Normal
Normal range keeping 4:3 or 16:9 aspect
ratio
30
42D65H_en_d.indd 30
10/29/08 8:25:30 AM
Watching TV
Selecting the picture size manually
Manual Selection
You can select different picture sizes that account for
the kind of each picture.
Auto Selection
If you set “WSS” and “4:3 Mode” in the Setup menu
on page 30, the optimum WIDE mode is automatically
chosen for every broadcast containing the WSS
information.
“WSS” menu
To enable Auto Selection, set “WSS” in the Setup
menu to “On”. (See page 30.)
Press WIDE.
1
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable
for the type of video signal currently received.
“4:3 Mode” menu
To set the type of the wide screen, select “Panorama”
or “Normal” in the 4:3 Mode menu. (See page 30.)
WIDE MODE
Normal
Zoom 14:9
Panorama
Full
4:3 Mode set to “Panorama”
Cinema 16:9
Cinema 14:9
2
Press WIDE or a/b while the WIDE MODE
menu displays on the screen.
4:3 Mode set to “Normal”
NOTE
• If the broadcast signal contains no WSS information, Auto
Selection will not function even when the WSS option is
enabled.
• "WSS" is also available in D-TV mode.
• As you toggle down the options, each mode is
immediately reflected on the TV.
Selected item
Description
Normal
For 4:3 “standard” pictures. A side bar appears on each side.
Zoom 14:9
For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and
bottom with some programmes.
Panorama
In this mode the picture is progressively stretched toward each side of the screen.
Full
For 16:9 squeeze pictures.
Cinema 16:9
For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Cinema 14:9
For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Dot by Dot
Displays an image with the same number of pixels on the screen (only when receiving a 1080i/1080p signal).
Underscan
Display with an Underscan image only when receiving a 720p signal. Display with the High-Definition image
adjusted optimally. Noise may appear on the edge of the screen with some programmes.
Normal
Zoom 14:9
Panorama
Cinema 14:9
Cinema 16:9
Full
NOTE
• Some picture sizes may not be
displayable depending on the
input signal.
31
42D65H_en_d.indd 31
11/25/08 10:38:52 AM
Watching TV
Selecting a preset AV Mode
The AV Mode function enables you to select
appropriate settings for audio and video to account for
the system environment which can vary due to factors
like room brightness, type of programme watched or
the type of image input from external equipment.
Using AV MODE on the remote control unit
1
Press AV MODE.
2
Press AV MODE again before the mode
displayed on the screen disappears.
Selected item
STANDARD
For a highly defined image in a normally
bright room
MOVIE
For a movie
GAME
Lowers image brightness for easier
viewing.
PC
For PC. (Available only when inputting an
HDMI or PC signal.)
USER
Allows the user to customise settings as
desired. You can set the mode for each
input source.
DYNAMIC
(FIXED)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
DYNAMIC
For a clear-cut image emphasising high
contrast for sports viewing
• Present AV Mode displays.
• The mode changes as shown below.
AV input mode
AV Mode: STANDARD
AV Mode: MOVIE
AV Mode: DYNAMIC
AV Mode: GAME
AV Mode: DYNAMIC (FIXED)
AV Mode: PC
Description
NOTE
• You can select a different AV Mode item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
• During PC input mode, only “PC” , “STANDARD” and
“USER” can be selected under the AV mode selection.
AV Mode: USER (A-TV)
PC input mode
AV Mode: STANDARD
AV Mode: PC
AV Mode: USER (
)
Using AV Mode on the menu screen
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Picture”.
3
Press a/b to select “AV Mode”, and then
press ENTER.
4
Press a/b/c/d to select the desired item,
and then press ENTER.
32
42D65H_en_e.indd 32
10/29/08 8:25:50 AM
Watching TV
Manual picture settings
Selected item
Picture adjustment
OPC
Sets whether or not the screen brightness
is automatically adjusted according to
the lighting condition in the room. (OPC
setting: See this page.)
Backlight
The screen dims
Contrast
For less contrast
For more contrast
Brightness
For less brightness
For more brightness
Colour
For less colour
intensity
For more colour
intensity
Tint
Skin tones become
purplish
Skin tones become
greenish
Sharpness
For less sharpness
For more sharpness
Advanced
For finer picture adjustments. (See page 34.)
Reset
Resets all picture adjustment items to the
factory preset values.
You can adjust the picture to your preference.
Follow the steps to adjust the picture.
1
2
Press MENU and the MENU screen displays.
Press c/d to select “Picture”.
MENU
[Picture]
Picture
[STANDARD]
OPC
[Off]
Backlight
[ +16] –16
Contrast
[ +30]
Brightness
dbutton
The screen
brightens
H OPC (Optical Picture Control) setting
Audio
AV Mode
cbutton
You can set the TV to automatically adjust the screen
to suitable backlight brightness according to the
lighting conditions.
+16
0
40
[
0] –30
+30
Colour
[
0] –30
+30
Tint
[
0] –30
+30
Sharpness
[
0] –10
+10
OPC indicator
Advanced
Reset
3
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
4
Press a/b or c/d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
NOTE
• For resetting all adjustment items to factory preset values,
pressa/b to select “Reset”, press ENTER, press c/d to
select “Yes”, and then press ENTER.
• Select “Advanced” and then press ENTER to set “Colour
Temp.”, “Film Mode”, “Black”, “3D-Y/C” , “Monochrome”
or “DNR”. See page 34.
Selected item
Description
On:Display
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
On
Automatically adjusts
Off
The brightness is fixed at the value set in
“Backlight” (See this page.)
OPC indicator
Light off
“Off” is selected in the OPC setting.
Lighted (Green) “On” or “On:Display” is selected in the
OPC setting.
NOTE
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
33
42D65H_en_e.indd 33
10/29/08 8:25:52 AM
Watching TV
Advanced picture settings
The advanced settings enable you to set the picture
adjustment in more detail. There are six options you
can choose from.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Picture”.
H 3D-Y/C
Provides high quality images with minimal dot crawl
and cross colour noise.
Selected item
3
Press a/b to select “Advanced”, and then
press ENTER.
4
Press a/b to select the desired menu, and
then press ENTER.
5
Press a/b or c/d to select the desired level,
and then press ENTER if necessary.
Description
Standard
Normal adjustment
Fast
For movie image
Slow
For still image
Off
3D-Y/C off
NOTE
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
H Colour Temp. (Colour Temperature)
H Monochrome
Adjusts the colour temperature to give the best white
image.
For viewing images in monochrome.
Selected item
High
Mid-High
Middle
Mid-Low
Low
Description
White with bluish tone
White with reddish tone
H DNR (Digital Noise Reduction)
Reduces noise on the screen and produces a clearer
video image.
Selected item
Description
Off
DNR setting off
H Film Mode
High
Higher noise reduction
Automatically detects a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
film frame for high-definition picture quality.
Low
Lower noise reduction
H Black
For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.
Selected item
Description
On
For high detail in black portions
Off
No adjustment
34
42D65H_en_e.indd 34
10/29/08 8:25:53 AM
Watching TV
Other picture settings
Adjusting the image position
Game Play Time
For adjusting a picture's horizontal and vertical position.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Position”, and then
press ENTER.
4
Press a/b to select “H-Position” or
“V-Position”.
Display position adjustment
H-Position
[
0]-10
+10
V-Position
[
0]-20
+20
Reset
Selected item
Description
H-Position
Centres the image by moving it to the left
or right.
V-Position
Centres the image by moving it up or
down.
5
Press c/d to adjust the item to your desired
position.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press
ENTER.
• Adjustments are stored separately according to input
source.
• Images may not be displayed properly depending on the
settings and/or signals.
This function displays the elapsed game time so you
do not lose track of the time.
To display the elapsed time, select “GAME” under “AV
Mode” for the input mode of the terminal connected to
the game console before starting the game.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Game Play Time”, and
then press ENTER.
4
Press c/d to select “On”, and then press
ENTER.
Selected item
Description
On
The elapsed time is displayed every 30
minutes when you switch to GAME mode
in external input mode.
Off
No adjustment
NOTE
Game Play Time is reset after performing the following
operations.
• When toggling the input.
• When changing “AV MODE”.
35
42D65H_en_f.indd 35
10/29/08 8:26:22 AM
Watching TV
Audio adjustment
You can adjust the audio of the selected AV mode.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Audio”.
Audio
This function allows you to enjoy bass-enhanced
sound.
1
Repeat steps 1 to 2 in Audio Adjustment.
2
Press a/b to select “Bass Enhancer”, and
then press ENTER.
3
Press c/d to select “On”, and then press
ENTER.
Power Control
STANDARD
Treble
[
0] –15
+15
Bass
[
0] –15
+15
Balance
[
0] L
R
SRS TS XT
[Off]
Bass Enhancer
[On]
Reset
Selected item
3
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
4
Press c/d to select the desired item or adjust
the item to the desired level. Press ENTER if
necessary.
Selected item
H Bass Enhancer
cbutton
dbutton
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio from
the right speaker
Decrease audio
from the left speaker
Description
On
Bass Enhancer function is on.
Off
Outputs the normal sound.
Output Volume Select
Allows you to select what controls the audio output.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Output Volume Select”,
and then press ENTER.
4
Press c/d to select “Fixed” or “Variable”, and
then press ENTER.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, press ENTER, press
c/d to select “Yes”, and then press ENTER.
Audio output terminal setting
H SRS TruSurround (TS) XT
You can enjoy SRS TruSurround XT sound, the same
as if you were in a movie theatre.
1
Repeat steps 1 to 2 in Audio Adjustment.
2
Press a/b to select “SRS TS XT”, and then
press ENTER.
3
Press c/d to select “On”, and then press
ENTER.
Selected item
Fixed
Selected item
SRS TruSuround XT creates a high
quality surround sound experience, when
watching DVD movies and TV programmes
broadcast in surround sound.
Off
Outputs the normal sound.
Description
Fixed
• Sound via speakers is adjusted with VOL
e/f on the remote control unit or the
TV.
• Sound via the MONITOR OUT terminal is
not adjustable and constantly outputs.
Variable
• Sound via the MONITOR OUT terminal is
adjusted with VOL e/f on the remote
control unit or the TV.
• Sound via speakers is muted.
Description
On
Variable
NOTE
• The “Audio” menu cannot be operated when headphones
are plugged in or when “Variable” is selected.
36
42D65H_en_f.indd 36
11/10/08 4:47:29 PM
Watching TV
A-TV (Analogue)/D-TV (Digital) buttons
Use the following buttons on the remote control to
operate the menu.
When you watch the TV for the first time
When the TV powers on for the first time after
purchase, perform the auto installation.
A-TV (Analogue TV)
You can run the auto installation to set channels
automatically.
1
To watch the analogue TV, select “Auto
Installation” from Setup menu. (See page 18.)
2
After setting the channels, you can select
a channel using CH r/s or 0-9 on the
remote control unit. (See page 19.)
D-TV (Digital TV)
When the TV accesses to D-TV mode for the first time,
you need to run the auto search. To scan all available
services in your area, follow the procedures below.
1
To watch D-TV broadcasts, select “Auto
Search” from “D-TV Menu”. (See page 43.)
2
After setting the channels, you can select
a channel using CH r/s or 0-9 on the
remote control unit. (See page 19.)
A-TV: Press to switch to analogue TV mode. After
switching from digital TV or external input mode to
analogue TV mode, the TV jumps to the most recently
viewed analogue channel.
D-TV: Press to switch to digital TV mode. After
switching from analogue TV or external input mode
to digital TV mode, the TV jumps to the most recently
viewed digital TV channel.
37
42D65H_en_f.indd 37
11/7/08 9:42:08 AM
Basic adjustment settings (Digital)
Selecting D-TV menu
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “D-TV Menu”, and then press ENTER.
D-TV Menu >
Programme
Programme
Setup
Option
4
Press a/b to select the desired item and adjust the item to the desired
level.
Press ENTER if necessary.
5
Press EXIT or MENU to exit the MENU.
Press RETURN as necessary to return to the previous MENUs.
D-TV input mode menu items
List of D-TV menu items to help you with operations
Programme
Programme List ......................................................................................................Page 42
Edit Channel
Favourite & Lock............................................................Page 42
Parental Rate .................................................................Page 42
Setup
Installation
Auto Search ..................................................................Page 43
Manual Adjust................................................................Page 43
Reset Data ....................................................................Page 44
System Setup
Video Setup...................................................................Page 44
Audio Setup
Digital Output .............................. Page 45
Multilingual .................................. Page 46
Time Setup ....................................................................Page 46
I-Plate Setup (Information Plate Setup)...........................Page 46
Option
Information .............................................................................................................Page 47
OAD Option ...........................................................................................................Page 47
S/W Update ..........................................................................................................Page 47
NOTE
• The illustrations in this manual are for explanation purposes and may vary slightly from the actual operations.
38
42D65H_en_f.indd 38
11/7/08 9:42:10 AM
Basic adjustment settings (Digital)
Electronic Programme Guide (EPG)
What is an EPG?
An “EPG (Electronic Programme Guide)” is a programme schedule, which is displayed on the TV screen. The EPG
is broadcasted together with D-TV. The TV screen shows the EPG when the viewer presses EPG on the remote
control, provided that the TV is receiving the digital broadcasting signal. The EPG enables you to search for a
programme or view the programme schedule in detail.
Selecting a programme using EPG
Basic operation
H Display the EPG screen
EPG
Jun. 6
Press EPG.
2
081
082
083
084
085
09:00
Jade
J2
Interactive Information Channel
Pearl
High Definition Jade
: Select
Jun. 6
11:00
10:00
No Availab Inside The St
09:58
12:00
No Availab Money Smart
No Available Event Text
No Available Event Text
NBA Finals 2008 - Los Angeles Lakers vs Bos Market
NBA Finals 2008 - Los Angeles Lakers vs Boston Mon
R Programme info
G Previous Day
Y Next Day
3
5
4
H Display the EPG screen
1
No Available Event Text
1 Press c/d to select the time span you want to search.
• Continue to press d to display programmes in the next time span.
2 Press a/b to select the desired programme.
• If a or b are displayed on the right of the services, continue to
press a/b to display next or previous screen.
H Close the EPG screen
Press EPG again.
Selecting a programme
3 Check programme information
4 Check for next day programme information
1
Press a/b/c/d to select the programme
you want to check.
1
Press Y.
2
Press R.
2
Press a/b/c/d to select the programme
you want to check.
3
Press R.
4
Press EXIT or EPG to exit the EPG screen.
EPG
Jun. 6
081
082
083
084
085
09:00
Jade
J2
Interactive Information Channel
Pearl
High Definition Jade
Jun. 6
11:00
10:00
No Availab Inside The St
09:58
12:00
No Available Event Text
No Availab Money Smart
No Available Event Text
No Available Event Text
NBA Finals 2008 - Los Angeles Lakers vs Bos Market
NBA Finals 2008 - Los Angeles Lakers vs Boston Mon
NBA Finals 2008 - Los Angeles Lakers vs Boston Celtics (L) 09:00 – 11:32
No Available Event Text
: Select
R Programme info
G Previous Day
Y Next Day
Programme Information
3
Press ENTER to tune to the selected
programme.
4
Press EXIT or EPG to exit the EPG screen.
39
42D65H_en_f.indd 39
11/25/08 9:19:15 AM
Basic adjustment settings (Digital)
5 Check previous day programme information
1
Press G.
2
Press a/b/c/d to select the programme
you want to check.
3
Press R.
EPG
Jun. 6
081
082
083
084
085
09:00
Jade
J2
Interactive Information Channel
Pearl
High Definition Jade
Jun. 6
11:00
10:00
No Availab Inside The St
09:58
12:00
No Available Event Text
No Availab Money Smart
No Available Event Text
No Available Event Text
NBA Finals 2008 - Los Angeles Lakers vs Bos Market
NBA Finals 2008 - Los Angeles Lakers vs Boston Mon
NBA Finals 2008 - Los Angeles Lakers vs Boston Celtics (L) 09:00 – 11:32
No Available Event Text
: Select
4
R Programme info
G Previous Day
Y Next Day
Press EXIT or EPG to exit the EPG screen.
40
42D65H_en_f.indd 40
10/29/08 8:26:30 AM
Basic adjustment settings (Digital)
Programme Guide
You can check the schedule of D-TV events and view
detailed information about current or future events.
1
Press GUIDE to display the programme guide
list.
2
Press a/b to display your desired
programme, and then press ENTER.
• When you press ENTER, the TV displays the
contents of the selected channel.
NOTE
• While the I-Plate (Information Plate Setup) is still on the
screen, you can press INFO on the remote control again to
call up the extended programme information of the current
TV channel. (See page 46.)
• Press INFO again and you call up the extended information
on the next programme.
• Pressing INFO again will not display the information for the
next programme if “No Available Event Text” under “Next”
is displayed.
Favourite Programme List
When you are watching Digital TV channels, you can
call up the Favourite Programme List using FAV. on
the remote control and select channel within the list.
Programme Guide
011
012
013
014
015
016
017
019
081
082
Home
News & Business
His TV
Her TV
Plus TV
World
CCTV 4
HDTV
Jade
J2
09:58
TVB
Now
Jade
(09:30 - 10:15)
Inside The Stock Exchange
Next
Jade
(10:15 - 10:20)
J.s.g. Song Video Corner (Sr.79)
INFO
While watching D-TV you can check the extended
programme information on the screen using INFO on
the remote control.
1
Press FAV. to display the Favourite
Programme List.
2
Press a/b to select your desired channel,
and then press ENTER.
Favourite Programme List
1
2
3
4
Dolby D
–
082
J2
085
Interactive Information Channel
012
High Definition Jade
019
News & Business
INFO
085
5
6
7
8
9
Jun.6
09:53
SFN_TVB
High Definition Jade
NOTE
Now : NBA Finals 2008 – Los Angeles Lakers vs Boston Celtics
09:00 – 11:45
Next : Money Smart
General INFO screen
1 Current LCN number
2 Date and current local
time
3 Audio system
(Dolby D or Mpeg)
4 Parental rate
5 Station name
42D65H_en_f.indd 41
• Refer to “Favourite & Lock” to register channels to your
Favourite Programme List. (See page 42.)
Selecting channels other than Favourite
programmes
0
6 Service name
7 Current programme
name
8 Time for the current
programme
9 Next programme
name
0 Signal Level
Directly input the number of the channel you want to
watch using 0 - 9 on the remote control unit or select
the channel from “Programme List” in the “Programme”
menu.
41
11/7/08 10:00:57 AM
Basic adjustment settings (Digital)
Programme List
You can select the desired programme from the
programme list.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “D-TV Menu”, and then
press ENTER.
4
Press a/b to select “Programme”, and then
press ENTER.
5
Press a/b to select “Programme List”, and
then press ENTER.
Selected item
FAV
You can easily select your favourite
channel from the Favourite Programme
List.
Lock
When the channel is locked, you must
enter your password whenever you tune to
the channel.
NOTE
• Press ENTER again to cancel “FAV” ( ) or “Lock” ( )
settings.
Parental Rate
This function allows TV channels to be restricted.
It prevents children from watching violent or sexual
scenes that may be considered inappropriate.
Programme List
Edit Channel
TV Programme List
6
Description
011
Home
012
News & Business
013
His TV
014
Her TV
1
Repeat steps 1 to 4 in Programme List.
2
Press a/b to select “Edit Channel”, and then
press ENTER.
If you have already set the password, enter it
here.
Press a/b to select your desired programme
number and name, and then press ENTER.
• See page 27 for setting a password.
Favourite & Lock
3
Assign channels to Favourite or to Lock groups.
1
Favourite & Lock
Parental Rate
Repeat steps 1 to 4 in Programme List.
4
2
Press a/b to select “Edit Channel”, and then
press ENTER.
If you have already set the password, enter it
here.
• See page 27 for setting a password.
3
Press a/b to select “Favourite & Lock”, and
then press ENTER.
Favourite & Lock
Press a/b to select “Parental Rate”, and then
press ENTER.
Press a/b to select your desired rating, and
then press ENTER.
Parental Rate
Block 5 age and below
Block 11 age and below
Block 13 age and below
Block 15 age and below
Block 17 age and below
Block 18 age and below
Parental Rate
No Block
CH No
CH Name
012
News & Business
013
His TV
014
Her TV
015
Plus TV
FAV
Lock
4
Press a/b to select your desired channel.
5
Press c/d to select “FAV” or “Lock”, and
then press ENTER.
42
42D65H_en_f.indd 42
10/29/08 8:26:32 AM
Basic adjustment settings (Digital)
Installation
The first time the receiver is powered on, “Programme
list is empty” will display on the screen. Under the
main menu, select “Installation” and enter into the submenu.
Auto Search
You can automatically search for and download TV
channels.
1
2
Manual Adjust
You can set some channel items manually.
1
Repeat steps 1 to 5 in Auto Search.
Press MENU and the MENU screen displays.
Press c/d to select “Option”.
2
Press a/b to select “Manual Adjust”, and
then press ENTER.
3
Press 0-9 orc/d to select a channel number.
4
Press a/b to select the desired menu item,
and make sure the correct frequency is
selected.
3
Press a/b to select “D-TV Menu”, and then
press ENTER.
4
Press a/b to select “Setup”, and then press
ENTER.
5
Press a/b to select “Installation”, and then
press ENTER.
If you have already set the password, enter it
here.
Channel No :
Frequency :
6
7
Press c/d to select “Yes”, and then press
ENTER.
8
Auto search starts.
• Programme auto search.
You do not need to do anything during the
auto search.
NOTE
• Once the D-TV signal is scanned, the channel number
(LCN number) and service name will be shown on the
programme list.
• The indicator operates concurrently with scanning channels
and shows the progress made.
37
602000 KHz
94%
Signal Level :
Quality :
• See page 27 for setting a password.
Press a/b to select “Auto Search”, and then
press ENTER.
• Channel settings apply to channels 21-69.
SNR :
100%
23 dB
Start Scan
5
Press a/b to select “Start Scan”, and then
press ENTER.
NOTE
• If a signal locks in, “Start Scan” will change to “Get Channel
Success”. Then you can press EXIT to leave the installation
page and watch a programme or continue scanning for
other channels. Anytime you watch a D-TV channel and
want to know the “Signal Level”, “Quality” or “SNR”, enter
into this page.
• If a signal does not lock in, “Start Scan” will show “Timeout
Error”. You can scan the signal again, or refer to the “Signal
Level” and “Quality” for aligning the direction of the antenna
to get the signal.
• Signal Level: The signal power or intensity from the
broadcasted frequency.
Quality: The clean level of the signal from the broadcasted
frequency.
SNR: The rate of signal and noise to radiated frequency.
43
42D65H_en_f.indd 43
10/29/08 8:26:33 AM
Basic adjustment settings (Digital)
Reset Data
Use this function to clear the channel data.
Video Setup
This function allows you to select an output format.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “D-TV Menu”, and then
press ENTER.
3
Press a/b to select “D-TV Menu”, and then
press ENTER.
4
Press a/b to select “Setup”, and then press
ENTER.
4
Press a/b to select “Setup”, and then press
ENTER.
5
Press a/b to select “Installation”, and then
press ENTER.
If you have already set the password, enter it
here.
5
Press a/b to select “System Setup”, and
then press ENTER.
• See page 27 for setting a password.
6
Press a/b to select “Video Setup”, and then
press ENTER.
6
Press a/b to select “Reset Data”, and then
press ENTER.
7
Press c/d to select “Yes”, and then press
ENTER.
1
2
Press MENU and the MENU screen displays.
Press c/d to select “Option”.
Video Setup
Audio Setup
Time Setup
I-Plate Setup
Output Format
Fix
Auto
7
Press a/b to select your desired item, and
then press ENTER.
Selected item
Description
Fix
Displays every D-TV broadcast converted
to 1080i.
Auto
Displays the D-TV broadcast in the format
it is received.
44
42D65H_en_f.indd 44
10/29/08 8:26:34 AM
Basic adjustment settings (Digital)
Digital Output
This function allows you to select your preferred audio
output system.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “D-TV Menu”, and then
press ENTER.
4
Press a/b to select “Setup”, and then press
ENTER.
5
Press a/b to select “System Setup”, and
then press ENTER.
6
Press a/b to select “Audio Setup”, and then
press ENTER.
7
Press a/b to select “Digital Output”, and then
press ENTER.
Using Digital Audio Output
It is possible to output audio through the DIGITAL
AUDIO OUTPUT terminal. PCM or Dolby Digital audio
outputs from the terminal.
Optical fibre
cable
(commercially
available)
To optical digital input of external audio devices
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the
same audio from the speakers. (The audio of the content
you are viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output
some signals, depending on devices and software.
Digital Output
Multilingual
Digital Output
PCM
Dolby Digital
8
Press a/b to select your desired output
system, and then press ENTER.
Selected item
Description
PCM
The optical output format is normally in
PCM.
Dolby Digital
Dolby Digital audio will be output when
there is a Dolby Digital audio signal. The
output will be in PCM when there is no
Dolby Digital audio signal.
45
42D65H_en_f.indd 45
11/6/08 2:50:41 PM
Basic adjustment settings (Digital)
Multilingual
Time Setup
You can select a different audio language when the
broadcast has different audio language.
Using MPX on the remote control
1
Press MPX.
2
Press a/b to select your desired audio
language, and then press ENTER.
Audio Language
This function allows you to select your local time zone.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “D-TV Menu”, and then
press ENTER.
4
Press a/b to select “Setup”, and then press
ENTER.
5
Press a/b to select “System Setup”, and
then press ENTER.
6
Press a/b to select “Time Setup”, and then
press ENTER.
Language (Dolby D)
Language 1 (Mpeg)
Video Setup
Audio Setup
Selected item
Language
(Dolby D)
Language 1
(Mpeg)
3
Time Setup
Description
I-Plate Setup
You can enjoy Dolby Digital audio. Outputs
Dolby Digital audio from the digital output.
You can enjoy Mpeg audio. Outputs PCM
audio from the digital output regardless of
the “Digital Output” setting.
If “Language 1(Mpeg)” is selected, you can
press a/b to select your desired “Audio
type”.
Audio Type
Stereo
Dual
Time Zone
GMT + 08:00
7
Press ENTER, and then use a/b to select
your local time zone. Finally, press ENTER to
confirm.
I-Plate Setup (Information Plate Setup)
This function allows you to configure the display time
and time format for the information plate.
1
Repeat steps 1 to 5 in Time Setup.
2
Press a/b to select “I-Plate Setup”, and then
press ENTER.
Mono Left
Mono Right
Video Setup
NOTE
Audio Setup
• The audio type depends on the signal source.
Time Setup
I-Plate Setup
Using Multilingual on the menu screen
1
Repeat steps 1 to 6 in Digital Output.
2
Press a/b to select “Multilingual”, and then
press ENTER.
NOTE
• MPX does not work for split-screen in D-TV (Digital TV)
mode.
• Selectable audio language is depended on the broadcast
signal. If the broadcast signal contains only “Dolby D”, then
you cannot select “Mpeg” in “Audio Language”.
3
Press a/b to select your desired item.
4
Press c/d to select your desired value, and
then press ENTER.
Display Time
5 sec
Time Format
24 HR
46
42D65H_en_f.indd 46
11/25/08 9:20:23 AM
Basic adjustment settings (Digital)
Information
S/W Update
You can check the current version of the software on
the screen.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “D-TV Menu”, and then
press ENTER.
4
5
Press a/b to select “Option”, and then press
ENTER.
Press a/b to select “Information”, and then
press ENTER.
Information
OAD Option
S/W Update
This function is only for service personnel to use for
software updates.
Switching subtitle languages
Each time you press [ on the remote control, the
subtitle switches.
Subtitle OFF
Subtitle 3 ON
Subtitle 1 ON
Subtitle 2 ON
NOTE
• When displaying subtitles, MHEG contents are not
displayed.
• When there is no subtitle broadcast, “No subtitle Data” will
be displayed.
• The number of subtitle languages available differs
depending on the programme.
Text
D-TV System Information
S/W Version :
XXXXXXX
Release Time :
May 20 2008 10:00
MHEG data broadcast is scheduled in Hong Kong.
You can watch a MHEG data broadcast after pressing
the TEXT button.
NOTE
• When displaying subtitles, MHEG contents are not
displayed.
OAD Option
• This function is for automatically download the data for the
version update software over digital broadcasts when the
“OAD Option” is set to “ON”.
• To download, follow the instructions when the download
message appears during a digital broadcast.
CAUTION
• Do not disconnect the AC cord when the software
upgrade is in progress, as this may cause the upgrade
to fail. If problem arises ask a qualified service
personnel before the software upgrade period expires.
47
42D65H_en_f.indd 47
11/13/08 12:18:04 PM
Settings when using external devices
Settings when using HDMI output devices
HDMI terminals can carry audio and visual signals to the TV with an HDMI certified cable. When you want to
output the audio and picture from an HDMI output device on the TV, select “INPUT1”, “INPUT2” or “INPUT3” by
switching the input source.
Connecting an HDMI output device
HDMI cable
(commercially available)
HDMI output
device
Ø 3.5 mm stereo
mini jack
H HDMI (High-Definition Multimedia Interface)
Auto View
1
To watch an HDMI equipment image, select
“INPUT1”, “INPUT2” or “INPUT3” using TV/
VIDEO on the remote control unit or on the TV.
2
Press MENU and the MENU screen displays.
3
Press c/d to select “Setup”.
4
H HDMI Audio Select
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “HDMI Audio Select”,
and then press ENTER.
• The HDMI Audio Select can be selected only
when “INPUT1” is selected.
Press a/b to select “HDMI Auto View”, and
then press ENTER.
Option
AQUOS LINK Setup
• The HDMI Auto View can be selected only when
“INPUT1”, “INPUT2” or “INPUT3” is selected.
MENU
Input Select
[Setup ... HDMI Auto View]
Setup
HDMI Audio Select
Option
Programme Setup
Game Play Time
Child Lock
Colour System
Input Skip
Fine Sync.
[DVD]
Position
HDMI Auto View
5
Enable /
Disable
4
[On]
Press c/d to select the desired setting, and
then press ENTER.
[Enable]
Press c/d to select the desired item, and
then press ENTER.
Selected items
[Fixed]
Audio Only
Auto Installation
Input Label
[Digital]
Output Volume Select
Selected items
Digital/
Analogue
Description
Set whether or not to use WIDE MODE
based on signal recognition, including an
HDMI signal.
Description
Select “Digital” for audio signal via the
HDMI terminal.
Select “Analogue” for audio signal via the
AUDIO jack.
NOTE
• Refer to your external equipment operation manual for the
above settings.
• When connecting a DVI-HDMI conversion adaptor/cable to
the HDMI terminal, the image may not come in clearly.
• “HDMI Audio Select” is only available for INPUT1.
48
42D65H_en_f.indd 48
11/25/08 10:39:55 AM
Settings when using external devices
Selecting the input source and
signal type
Selecting input source
Can use for selecting the input source.
Using TV/VIDEO on the remote control unit or on
the TV
TV/VIDEO allows you to choose from the available
input sources.
Selecting input signal type
For setting the signal type of external equipment.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Input Select”, and then
press ENTER.
4
Press a/b to select a signal type you want to
set, and then press ENTER.
Input source
1
Press TV/VIDEO on the remote control unit or
on the TV.
2
Press TV/VIDEO on the remote control unit or
on the TV to select the input source.
Selectable item
INPUT4
Auto, S-VIDEO, VIDEO
INPUT5
Auto, COMPONENT, VIDEO
INPUT6
Auto, COMPONENT, VIDEO
NOTE
• If no colour image displays, try changing the other
signal type.
• Check the operation manual of the external equipment for
the signal type.
• When the signal type is set to “Auto”, the input terminal
where a cable is connected is automatically selected.
• When the signal type is set to “Auto” and multiple video
signal cables are connected, the signal type is selected in
the following prioritised order:
INPUT4: S-VIDEO s VIDEO
INPUT5/INPUT6: COMPONENT s VIDEO
• The image and sound from the selected source
are output on the TV.
• You can also select the input source by pressing
a/b.
49
42D65H_en_f.indd 49
10/29/08 8:26:40 AM
Settings when using external devices
Labelling input sources
Skipping HDMI/RGB input
You can assign each input source a label as you
prefer.
This setting allows you to skip the HDMI or RGB input
on the “Input Select” menu.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
1
Press TV/VIDEO to select the desired input
source.
3
Press a/b to select “Input Skip”, and then
press ENTER.
2
Press MENU and the MENU screen displays.
4
Press a/b to select the Input (INPUT1 to
INPUT3 and INPUT7) you wish to skip, and
then press ENTER.
3
Press c/d to select “Setup”.
4
Press a/b to select “Input Label”, and then
press ENTER.
5
Press a/b/c/d to select each character of
the new name for the input source, and then
press ENTER.
INPUT1(HDMI)
Skip input selection of HDMI
INPUT2(HDMI)
INPUT3(HDMI)
INPUT7(RGB)
Yes
No
5
Press c/d to select “Yes”, and then press
ENTER.
6
Press MENU to exit.
External equipment name settings
A B C D E F G H I J CLEAR
K L M N O P Q R S T BACK
U VWX Y Z + - . _
0 1 2 3 4 5 6 7 8 9
END
(Example)
6
Repeat until the name is fully spelt out.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, select “END”, then press
ENTER to exit from the labelling menu.
INPUT SOURCE
A-TV
D-TV
Colour system settings
You can change the colour system to one that is
compatible with the image on the screen.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Colour System”, and
then press ENTER.
4
Press a/b to select a compatible video signal
system of your equipment, and then press
ENTER.
DVD
Colour system settings
AUTO
INPUT2
PAL
INPUT3
SECAM
NTSC 3.58
INPUT4
NTSC 4.43
INPUT5
PAL-60
INPUT6
INPUT7
(Example)
NOTE
• You cannot change labels if the input source is A-TV or D-TV.
NOTE
• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• “Colour System” is selectable only when inputting an
S-VIDEO or composite signal.
50
42D65H_en_f.indd 50
11/7/08 9:41:15 AM
AQUOS LINK
Controlling HDMI devices using AQUOS LINK
What is AQUOS LINK?
Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you
can interactively operate compatible system devices (AV amplifier, DVD, Blu-ray Disc
device) using a single remote control.
By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV,
you can control a recorder or AV amplifier using the remote control of the TV.
AQUOS LINK allows you to operate the HDMI-connected equipment with one remote
control.
NOTE
• Please check the availability of AQUOS LINK-compatible AQUOS BD Players and AQUOS
LINK-compatible audio systems via the sole agent in your country.
What you can do with AQUOS LINK
✔ One Touch Recording (D-TV only)
You do not have to search for the remote control of your recording device. Press the
REC E or REC STOP H inside the flip cover to start/stop recording what you see
on the TV.
✔ One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the image
from the HDMI source.
✔ Single remote control operation
The AQUOS LINK automatically recognises the connected HDMI device and you can
control the TV and the devices as if using a universal remote control.
✔ Operating Title list of external devices
You can also call up the external player’s Top menu or AQUOS BD Player’s Title list
provided that the devices support AQUOS LINK.
✔ Multiple control of HDMI devices
You can select which HDMI device to operate using OPTION.
✔ Controlling the AQUOS LINK-compatible audio system
You can adjust the volume and select the sound mode of the AQUOS LINK-compatible
audio system.
NOTE
• Point the remote control toward the TV, not to the connected HDMI device.
• Video noise may occur depending on the type of HDMI-certified cable used. Make sure to use
a HDMI-certified cable.
• Up to 3 pieces of HDMI recording equipment and one AV amplifier can be connected using this
system.
• These operations affect the HDMI device selected as the current input source. If the device does
not operate, turn on the device and select the appropriate input source using TV/VIDEO.
• When you insert/remove HDMI-certified cables or change connections, turn on all connected
HDMI devices before turning on the TV. Confirm that picture and audio are correctly output by
selecting “INPUT1”, “INPUT2” or “INPUT3” from the INPUT SOURCE menu.
51
42D65H_en_f.indd 51
10/29/08 8:26:42 AM
AQUOS LINK
AQUOS LINK connection
First connect the AQUOS LINK-compatible audio system or an AQUOS BD Player that supports the HDMI CEC
protocol.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, first turn on the power of the TV with all relevant
device’s power turned on. Change the external input source by pressing TV/VIDEO, select the appropriate input source and
verify the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
Connecting an AQUOS BD Player via the AQUOS LINKcompatible audio system
HDMI-certified cable (commercially available)
Connecting an AQUOS BD
Player only
Optical fibre cable
(commercially available)
HDMI-certified cable
(commercially available)
HDMI-certified cable
(commercially available)
AQUOS BD Player
AQUOS BD Player
AQUOS LINK-compatible
audio system
AQUOS LINK Setup
AQUOS LINK Auto power on
If this is activated, the One Touch Play function
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image from
the HDMI source.
4
Press a/b to select “Auto Power On”, and
then press ENTER.
Auto Power On
Setting auto power on by AQUOS LINK
Selecting Recorder
On
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “AQUOS LINK Setup”,
and then press ENTER.
Off
5
Press c/d to select “On”, and then press
ENTER.
6
Press MENU to exit.
NOTE
• The factory default for this item is “Off”.
52
42D65H_en_f.indd 52
11/25/08 10:41:11 AM
AQUOS LINK
Selecting recorder
Operating an AQUOS LINK device
You can select a recorder for the recording from
several connected recorders.
1
Repeat steps 1 to 3 in AQUOS LINK Auto
power on.
2
Press a/b to select “Selecting Recorder”,
and then press ENTER.
Auto Power On
AQUOS LINK allows you to operate the HDMIconnected device with one remote control.
Use the following procedure to start playback.
1
Selecting recorder for recording by [REC] button
Selecting Recorder
2
INPUT1
[1. 0. 0. 0]
INPUT2
[2. 0. 0. 0]
Press PLAY I to start playback of a title.
• See page 54, section “Playback of titles using
AQUOS LINK” if you want to start playback using
the list of the titles of the AQUOS BD Player.
Press FWD J to fast forward.
Press REV G to reverse.
Press STOP H to stop.
Press POWER to turn the HDMI-connected
device on/off.
Use the following procedure to start recording.
3
Select the recorder, and then press ENTER.
4
Press MENU to exit.
• Make sure the antenna cable is connected properly.
• Check if the recording media (HDD, DVD, etc.) has enough
capacity for recording a programme.
• Select the equipment for recording in “Selecting Recorder”.
NOTE
• If you have connected the AQUOS LINK-compatible audio
system between the TV and a CEC compatible-recorder,
the input source’s indication changes from “INPUT1” to
“INPUT1 (Sub)” as it is shown below.
Auto Power On
Check the following items before recording.
1
After you selected recording media (HDD,
DVD, etc.) in the menu, please make sure the
recording menu in the ready condition.
2
Press REC E to record a programme.
3
Press REC STOP H to stop recording.
Selecting recorder for recording by [REC] button
Selecting Recorder
INPUT1
[1. 0. 0. 0]
INPUT1 (Sub)
[1. 1. 0. 0]
INPUT2
[2. 0. 0. 0]
Listening with the AQUOS LINKcompatible audio system
You can opt to listen to the TV sound only from the
AQUOS LINK-compatible audio system.
1
2
Open the remote control unit’s flip cover.
Press OPTION and the AQUOS LINK menu
screen displays.
Press a/b to select “By AQUOS AUDIO SP”,
and then press ENTER.
AQUOS LINK Menu
Recorder EPG
Top Menu/Title List
Media change
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
Setup Menu
Model select
• The sound from the TV speaker and headphone
terminal is silenced and only the sound from the
AQUOS LINK-compatible audio system is audible.
• You can use VOL k/l and MUTE (e).
53
42D65H_en_f.indd 53
11/13/08 1:39:34 PM
AQUOS LINK
Listening with the AQUOS TV speaker
system
You can opt to listen to the TV sound only from the
AQUOS TV speaker system.
1
Open the remote control unit’s flip cover,
press OPTION and the AQUOS LINK menu
screen displays.
2
Press a/b to select “By AQUOS SP”, and
then press ENTER.
Playback of titles using AQUOS LINK
This section explains how to play back a title in the
AQUOS BD Player.
Manually changing the AQUOS LINKcompatible audio system’s sound mode
1
Open the remote control unit’s flip cover,
press OPTION and the AQUOS LINK menu
screen displays.
2
Press a/b to select “Sound mode change”.
AQUOS LINK Menu
Recorder EPG
Top Menu/Title List
1
Power on the AQUOS BD player, and select
the appropriate external input.
2
Open the remote control unit’s flip cover,
press OPTION and the AQUOS LINK menu
screen displays.
3
Press a/b to select “Top Menu/Title List”,
and then press ENTER.
Media change
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
Setup Menu
Model select
3
AQUOS LINK Menu
The sound mode changes every time you press
ENTER.
Recorder EPG
Top Menu/Title List
• Refer to the operation manual of the AQUOS audio
speaker system for details.
Media change
By AQUOS AUDIO SP
By AQUOS SP
Calling up the menu of an external device
connected with the TV via HDMI
Sound mode change
Setup Menu
Model select
You can call up the menu of an HDMI CEC-compatible
external device (player, recorder, decoder, etc.) using
the “Setup Menu” function.
1
Open the remote control unit’s flip cover, and
then press OPTION.
2
Press a/b to select “Setup Menu”, and then
press ENTER.
• The linked recorder now powers on and the TV
automatically selects the appropriate external
input source.
• The title list data from the connected AQUOS BD
Player displays.
4
Select the title with a/b/c/d, and then
press PLAY I to start playback.
NOTE
• If a connected device does not have this function or the
device is in a status where the menu cannot be displayed
(recording, entering standby, etc.), this function may not be
available.
54
42D65H_en_f.indd 54
11/13/08 1:39:37 PM
AQUOS LINK
Selecting media type for CEC-compatible
recorder
If your recorder has multiple storage media, select the
media type here.
the remote control unit’s flip cover,
1 Open
press OPTION and the AQUOS LINK menu
screen displays.
2
Press a/b to select “Media change”, and then
press ENTER.
Recording via the CEC-compatible
recorder’s EPG (only for recorders)
You can call up the CEC-compatible recorder’s EPG
and preset timer recordings using the TV’s remote
control.
1
2
AQUOS LINK Menu
Open the remote control unit’s flip cover,
press OPTION and the AQUOS LINK menu
screen displays.
Press a/b to select “Recorder EPG”, and then
press ENTER.
• The external input source switches and the
recorder’s EPG is displayed.
Recorder EPG
Top Menu/Title List
AQUOS LINK Menu
Media change
Recorder EPG
Top Menu/Title List
By AQUOS AUDIO SP
By AQUOS SP
Media change
Sound mode change
Setup Menu
Model select
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
3
Select the desired medium, such as DVD
or Hard Disk Drive (HDD). The media type
changes every time you press ENTER.
HDMI device selection
If multiple HDMI devices are connected in a daisy chain,
you can specify which device to control here.
1
2
Open the remote control unit’s flip cover,
press OPTION and the AQUOS LINK menu
screen displays.
Setup Menu
Model select
3
Select the programme to record.
• You can use a/b/c/d, RETURN, EXIT and
coloured buttons.
NOTE
• Refer to the operation manual of the recorder for details.
Press a/b to select “Model select”, and then
press ENTER. The HDMI device changes
every time you press ENTER.
55
42D65H_en_f.indd 55
11/25/08 9:26:15 AM
Connecting a PC
Use the PC terminals to connect a PC.
NOTE
• The PC INPUT terminals are DDC1/2B-compatible.
• Refer to page 61 for a list of PC signals compatible with the TV.
ANALOG
RGB
RGB cable
(commercially available)
Ø 3.5 mm stereo
minijack cable
(commercially available)
AUDIO
(R/L)
PC
Signal names for 15-pin mini D-sub connector
Pin No.
5
15
4
10
14
2
3
9
13
8
12
Signal name
1
7
11
6
G
B
Not connected
CSYNC
Pin No.
Signal name
GND (Ground)
GND (Ground)
GND (Ground)
+5V
GND (Ground)
Pin No.
Signal name
Not connected
SDA
HD
VD
SCL
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• Pin No. 5 is not used for inputting the signal.
Displaying a PC image on the screen
To view an image from a PC, select “INPUT7” using
TV/VIDEO on the remote control unit or TV/VIDEO on
the TV.
INPUT SOURCE
A-TV
D-TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
INPUT7
When connecting to a PC, the correct input signal type
is automatically detected. (See page 59.)
NOTE
• Each time TV/VIDEO is pressed, the input source toggles.
56
42D65H_en_f.indd 56
10/29/08 8:26:47 AM
Connecting a PC
Selecting the picture size
You can select the picture size as illustrated below.
NOTE
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
Connecting a PC
ANALOG
RGB
RGB cable
(commercially available)
Ø 3.5 mm stereo
minijack cable
(commercially available)
AUDIO
(R/L)
PC
1
Press WIDE.
• The WIDE MODE menu displays.
WIDE MODE
Normal
Full
WIDE MODE
or
Full
Dot by Dot
(Example)
2
Press WIDE or a/b to select a desired item
on the menu.
a
Picture size images.
Input Signal
1024 g 768
1280 g 1024
Normal
Keeps the original aspect
ratio in a full screen
display.
Full
An image fully fills the
screen.
Dot by Dot
Detects the resolution of
the signal and displays
an image with the same
number of pixels on the
screen.
57
42D65H_en_f.indd 57
11/13/08 1:40:24 PM
Connecting a PC
Adjusting the PC image automatically
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available RGB cable, etc.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
Press a/b to select “Fine Sync.”, and then
press ENTER.
3
Press a/b to select “Fine Sync.”, and then
press ENTER.
4
Press a/b to select “Auto Sync.”, and then
press ENTER.
4
Press a/b to select a specific adjustment
item among “H-Position”, “V-Position”, “Clock”
and “Phase”.
5
Press c/d to select “Yes”, and then press
ENTER.
Auto Sync.
Auto adjustment of image display parameters
Input Signal
Image position adjustment, etc.
Input Signal
• Auto Sync. starts.
Auto Sync.
H-Position
[ 90]
+
V-Position
[ 60]
+
Clock
[ 90]
+
[
+
H-Position
[
0]
Phase
V-Position
[
0]
Reset
Clock
[
0]
Phase
[
0]
Yes
No
8]
Reset
Selected item
NOTE
• Auto Sync. is likely to succeed when an input PC image
has wide vertical stripes (e.g. pattern with high contrast
stripes, or cross-hatched).
It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the TV and switch it on
before starting Auto Sync.
Description
H-Position
Centres the image by moving it to the left
or right.
V-Position
Centres the image by moving it up or
down.
Clock
Adjusts when the image flickers with
vertical stripes.
Phase
Adjusts when characters have low
contrast or when the image flickers.
5
Press c/d to adjust the item to your desired
position.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, press ENTER, press
c/d to select “Yes”, and then press ENTER.
• Images may not be displayed properly depending on the
settings and/or input signals.
58
42D65H_en_f.indd 58
10/29/08 8:26:49 AM
Connecting a PC
Input resolution settings
Selecting the input resolution
• Some input signals may have to be registered manually to
display properly.
• The pairs of input signals (resolutions) in the list below are
not distinguishable when received. In such case, you have
to set the correct signal manually. After setting once, it will
display when the same signal (resolution) is input again.
1024 x 768
1360 x 768
NOTE
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 2 input signals listed above.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Fine Sync.”, and then
press ENTER.
4
Press a/b to select “Input Signal”, and then
press ENTER.
5
Press c/d to select the desired input signal
on the display, and then press ENTER.
Manually selecting the resolution
of the picture input signal
Input Signal
Auto Sync.
H-Position
[ 90]
V-Position
[ 60]
Clock
[ 90]
Phase
[
1024 x 768
1360 x 768
8]
Reset
(Example)
59
42D65H_en_f.indd 59
10/29/08 8:26:50 AM
Connecting a PC
PC Control of the TV
• When a programme is set, the TV can be controlled from the PC using the RS-232C terminal.
The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and
settings can be made, enabling automatic programmed playing.
• Attach an RS-232C cable cross-type (commercially available) to the Din/D-sub RS-232C for the connections.
NOTE
• This operation system should be used by a person who is accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the PC to match the communications conditions of the TV. The
communications settings of the TV are as follows:
Baud rate:
9,600 bps
Data length:
8 bits
Parity bit:
None
Stop bit:
1 bit
Flow control:
None
Communication procedure
Send the control commands from the PC via the RS-232C connector.
The TV operates according to the received command and sends a response message to the PC.
Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the
next command.
Command format
Eight ASCII codes e CR
C1 C2 C3 C4 P1 P2 P3
Command 4-digits
Parameter 4-digits
P4
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0 — 9, space, ?
Return code
Parameter
Input the parameter values, aligning left, and fill with space(s) for the remainder. (Be sure that four values are input for the
parameter.)
When the input parameter is not correct, “ERR” returns. (Refer to “Response code format”.)
0
0
0
0
–
3
0
1
0
0
0
0
5
9
5
When “?” is input for some commands, the present setting value responds.
?
?
?
?
?
Response code format
Normal response
O
K
Problem response (communication error or incorrect command)
E
Return code (0DH)
R
R
Return code (0DH)
60
42D65H_en_h.indd 60
10/29/08 8:27:16 AM
Connecting a PC
PC compatibility chart
VESA
Horizontal Vertical
Frequency Frequency Standard
Resolution
VGA
SVGA
720 g 400
31.5 kHz
70 Hz
640 g 480
31.5 kHz
60 Hz
✓
640 g 480
37.9 kHz
72 Hz
✓
640 g 480
37.5 kHz
75 Hz
✓
800 g 600
35.1 kHz
56 Hz
800 g 600
37.9 kHz
800 g 600
48.1 kHz
800 g 600
46.9 kHz
VESA
Horizontal Vertical
Frequency Frequency Standard
Resolution
1024 g 768
48.4 kHz
60 Hz
✓
1024 g 768
56.5 kHz
70 Hz
✓
1024 g 768
60.0 kHz
75 Hz
✓
WXGA
1360 g 768
47.7 kHz
60 Hz
✓
✓
SXGA
1280 g 1024
64.0 kHz
60 Hz
✓
60 Hz
✓
SXGAe 1400 g 1050
65.3 kHz
60 Hz
✓
72 Hz
✓
75 Hz
✓
XGA
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA and XGA are registered trademarks of International Business Machines Corp.
RS-232C commands list
Commands
• Commands not indicated here are not guaranteed to operate.
CONTROL ITEM
COMMAND
PARAMETER
CONTROL
CONTENTS
CONTROL ITEM
COMMAND
PARAMETER
POWER SETTING
P O W R 0 _
_
_
VOLUME
V O L M *
* _ _
INPUT SELECTION A
I
T G D _
_
_
_
POSITION
H P O S *
* * _
I
T V D _
_
_
_
H P O S *
* * _
I
D T V
_
_
_
_
V P O S *
* * _
I
A V D *
_
_
_
V P O S *
* * _
D C C H *
* _ _
C L C K *
* * _
C H U P _
_
_
_
P H S E *
* _ _
C H D W _
_
_
_
CHANNEL
INPUT SELECTION B
AV MODE
SELECTION
WIDE MODE
W I
D E 0 _
_
_
D T V D
* * * _
W I
D E 1 _
_
_
D T U P
_
_
_
_
W I
D E 2 _
_
_
D T D W _
_
_
_
W I
D E 3 _
_
_
I
N P 4 0 _
_
_
W I
D E 4 _
_
_
I
N P 4 2 _
_
_
W I
D E 5 _
_
_
I
N P 4 3 _
_
_
W I
D E 6 _
_
_
I
N P 5 0 _
_
_
W I
D E 7 _
_
_
I
N P 5 1 _
_
_
W I
D E 8 _
_
_
I
N P 5 3 _
_
_
M U T E 0 _
_
_
I
N P 6 0 _
_
_
M U T E 1 _
_
_
I
N P 6 1 _
_
_
M U T E 2 _
_
_
I
N P 6 3 _
_
_
A C S U 0 _
_
_
A V M D 0 _
_
_
A C S U 1 _
_
_
A V M D 1 _
_
_
A C S U 2 _
_
_
A V M D 2 _
_
_
AUDIO CHANGE
A C H A _
_
_
A V M D 3 _
_
_
SLEEP TIMER
O F
T M 0 _
_ _
A V M D 4 _
_
_
O F
T M 1 _
_
_
A V M D 5 _
_
_
O F
T M 2 _
_
_
A V M D 6 _
_
_
O F
T M 3 _
_
_
A V M D 7 _
_
_
O F
T M 4 _
_
_
O F
T M 5 _
_
_
MUTE
SURROUND
_
CONTROL
CONTENTS
NOTE
• If an underbar (_) appears in the parameter column, enter a
space.
• If an asterisk (*) appears, enter a value in the range indicated
in brackets under CONTROL CONTENTS.
61
42D65H_en_h.indd 61
10/29/08 8:27:20 AM
Appendix
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the TV
serviced.
Problem
Possible Solution
• No power.
• Check if you pressed POWER on the remote control unit. (See page 14.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected? (See page 10.)
• Has the power been turned on? (See page 14.)
• Unit cannot be operated.
• External influences such as lightning, static electricity, etc., may cause improper operation. In
this case, operate the unit after first turning the power off the TV or unplugging the AC cord and
re-plugging it in after 1 or 2 minutes.
• Remote control unit does not operate.
•
•
•
•
• Picture is cut off.
• Is the image position correct? (See page 35.)
• Are screen mode adjustments such as picture size made correctly? (See pages 30, 31 and 57.)
• Strange colour, light colour, or dark, or
colour misalignment.
•
•
•
•
•
• Power is suddenly turned off.
• The unit's internal temperature has increased.
Remove any objects blocking the vent or clean.
• Check the power control setting. (See pages 28 and 29.)
• Is the sleep timer set? (See page 28.)
• No picture.
•
•
•
•
•
•
• No sound.
• Is the volume too low? (See page 19.)
• Make sure that headphones are not connected. (See page 8.)
• The TV sometimes makes a cracking
sound.
• This is not a malfunction. This happens when the cabinet slightly expands and contracts
according to changes in temperature. This does not affect the TV's performance.
Are batteries inserted with polarity (e, f) aligned? (See page 13.)
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light shining on the remote control sensor?
Adjust the picture tone. (See pages 33 to 35.)
Is the room too bright? The picture may look dark in a room that is too bright.
Check the colour system setting. (See pages 21 and 50.)
Check the input signal setting. (See page 59.)
Check the HDMI Auto View setting. (See page 48.)
Is the connection to external equipment correct? (See pages 11, 12, 48, 56 and 57.)
Has the input signal setup been performed correctly after connection? (See page 59.)
Is the correct input selected? (See page 49.)
Is the picture adjustment correct? (See pages 33 to 35.)
Is the antenna connected properly? (See page 10.)
Is “On” selected in “Audio Only”? (See page 25.)
Troubleshooting-Digital broadcasting
Problem
Possible Solution
• No picture or no sound.
• Is the correct Input source selected? (See page 49.)
• Block noise appears on the screen.
•
•
•
•
• D-TV broadcasts cannot be received.
• Is the D-TV antenna set up properly?
• Is the antenna cable connected properly? (See page 10.)
• Is the channel settings correct? (See page 43 and 44.)
• A specific channel cannot be received.
• Check the Signal Level and Quality. (See page 43.)
Is the antenna pointing in the correct direction?
Check the Signal Level and Quality. (See page 43.)
Are physical objects blocking the antenna?
Is the antenna or antenna cable compatible with D-TV broadcast?
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: f20°C to e60°C.
62
42D65H_en_h.indd 62
10/29/08 8:55:12 AM
Appendix
Error messages about recording using AQUOS LINK
The example of an error message
displayed on a screen
Error code
Failed to record
Cannot record the broadcast.
S05
Failed to record
Cannot record the broadcast.
S06
Failed to record
Cannot record the broadcast.
S07
Failed to record
S09
Failed to record
S10
Failed to record
S11
Failed to record
S12
Failed to record
Cannot record the programme.
S13
Failed to record
Cannot record the programme.
S14
Failed to record
No record media available.
S16
Failed to record
Cannot record while playback.
S17
Failed to record
Cannot record while recording other
programme.
S18
Failed to record
No record media available.
S19
Failed to record
Cannot record while not receiving
broadcast.
S20
Failed to record
No record media available.
S21
Failed to record
No recordable memory available.
S22
Failed to record
Age limitation is set.
S23
Failed to record
Cannot record with the recorder.
S31
Possible Solution
Check the content (broadcast or programme)
or the recording medium such as HDD or DVD.
Either the content or the recording medium may
be incompatible.
This network cannot be recorded.
Use the recording function of your recording
device, not the AQUOS LINK function.
Use the recording function of your recording
device, not the AQUOS LINK function.
Check the content (broadcast or programme).
It may be incompatible.
Check the recording medium.
Stop playback and set up the recording again.
During recording, another recording is not possible.
Check the recording medium.
Writing to the medium is prohibited.
Please check if the settings are properly set.
Broadcasts are not receivable.
Recording to the medium is not possible. Check
the recording medium.
Check the capacity of the recording medium.
Deactivate the child lock and set up the
recording again.
Check your recording device.
63
42D65H_en_h.indd 63
10/29/08 8:27:21 AM
Appendix
Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Reset”, and then press
ENTER.
4
Press c/d to select “Yes”, and then press
ENTER.
Identification
You can check the current version of the software on
the screen.
• When “Reset” is completed, the backlight will turn
off and then on in a short period of time.
• The screen will be returned to its original state.
• “Execute auto installation” displays on the screen.
5
Press c/d to select “Yes” and then press
ENTER.
• “Auto installation” will be executed.
NOTE
• If you execute “Reset”, all the settings such as Picture,
Audio, Programme and Language will be reset to the
factory preset values.
64
42D65H_en_h.indd 64
10/29/08 8:27:22 AM
Appendix
Specifications
Model LC-42D65H
Item
LC-46D65H
42o (1070 mm) Advanced Super View &
BLACK TFT LCD
LCD panel
46o (1170 mm) Advanced Super View &
BLACK TFT LCD
Resolution
2,073,600 pixels (1920 g 1080)
Video Colour System
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV
Function
TV-Standard
Receiving
Channel
PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC: M
Digital
DMB-TH
VHF/UHF
44.25 — 863.25 MHz
CATV
S1 — S41ch (including Hyperband)
Digital Terrestrial Broadcast 470MHz-862MHz
TV-Tuning System
Auto Preset 99 ch
STEREO/BILINGUAL
NICAM: B/G, I, D/K A2 stereo: B/G
Brightness
450 cd/m2
Backlight life
60,000 hours (at Backlight Standard position)
Viewing angles
H : 176º V : 176º
Audio amplifier
15W g 2
Speakers
10 g 4 cm (4 pcs)
Terminals
Rear
Side
OSD language
Antenna input
UHF/VHF 75 q DIN type (Analogue & Digital)
INPUT1
HDMI (HDMI input) (480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz, 1080P/50Hz, 1080P/60Hz,1080P/24Hz),
AUDIO in (Ø 3.5 mm jack)
INPUT2
HDMI (HDMI input) (480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz, 1080P/50Hz, 1080P/60Hz, 1080P/24Hz)
INPUT3 (Side)
HDMI (HDMI input) (480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz, 1080P/50Hz, 1080P/60Hz, 1080P/24Hz)
INPUT4 (Side)
S-VIDEO in, VIDEO in, AUDIO in
INPUT5
VIDEO in, AUDIO in,
COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)
INPUT6
VIDEO in, AUDIO in,
COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz)
INPUT7 (PC input)
15 pin mini D-sub, AUDIO in (Ø 3.5 mm jack)
MONITOR OUT
VIDEO out, AUDIO out
RS-232C
9 pin D-sub male connector
DIGITAL AUDIO OUTPUT Optical Digital Audio output
Headphone
Audio output (Ø 3.5 mm jack)
English/Simplified Chinese/Traditional Chinese/Arabic
Analogue
Digital
English/Simplified Chinese/Traditional Chinese
Power Requirement
AC 110 — 240 V, 50/60 Hz
Power Consumption
Weight
without stand
227 W (0.5 W Standby)
21.5 kg
26.5 kg
with stand
Operating Temperature
283 W (0.5 W Standby)
24.5 kg
29.5 kg
0°C — 40°C
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
Optional accessory
The listed optional accessory is available for the LCD colour
TV. Please purchase it at your nearest shop.
• Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue for
compatibility and check the availability.
Part name
Model number
Wall mount bracket
(for LC-42D65H/
LC-46D65H)
AN-52AG4
65
42D65H_en_h.indd 65
11/25/08 10:42:40 AM
Appendix
Dimensional drawings
Unit: mm
LC-42D65H
1004
646
526.2
409
550
62
708
933.2
200
400
95
114
400
305
LC-46D65H
1101
434
575.6
698
760
1023.4
62
550
124
95
400
175
400
325
66
42D65H_en_h.indd 66
10/29/08 8:27:23 AM
Appendix
Mounting the TV on the wall
Removing the stand
For wall mounting with the optional bracket, remove the stand.
Before detaching/attaching the stand
•
•
•
•
Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.
Remove all terminal covers and connected cables.
Lay the TV down on cushioning (such as a blanket) over a table.
Make sure two or more people perform the operation.
CAUTION
• Do not remove the stand from the TV unless using an optional bracket to mount it.
1
Hex key
2
Stand post
Unfasten the four screws used to secure the stand
in place.
1 Detach the stand from the TV. (Hold the stand so
it will not drop from the edge of the base area.)
2 Remove the stand post from the stand base and
attach it to the TV.
NOTE
• To attach the stand, perform the above steps in reverse order.
Handling and precautions with the wall-mounted TV
• You can mount the TV on the wall using the optional AN-52AG4 bracket.
• For details, refer to the instructions supplied with the optional bracket.
CAUTION
• This TV should be mounted on the wall only with the AN-52AG4 (SHARP) wall mount bracket. The use of other wall
mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualified service personnel about using an optional AN-52AG4 bracket to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-52AG4 wall mount bracket.
(See the bracket instructions for details.)
Vertical mounting
Angular mounting
About setting the TV angle
/1
0/5/10
5/20°
AN-52AG4
NOTE
• Detach the cable clamps on the rear of the TV when using the optional mount bracket.
• To use this TV mounted on a wall, first remove the cover at the 4 locations on the rear of the TV, and then use the screws
supplied with the wall mount bracket to secure the bracket to the rear of the TV.
67
42D65H_en_h.indd 67
10/29/08 8:27:23 AM
Appendix
CLEARING THE PASSWORD
If you forget your password, set a new password using the following procedure.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Child Lock”, and then press ENTER.
4
The password input screen displays.
5
If you enter “3001” using 0-9, the “Child Lock” setting menu will be displayed.
6
Enter the 4-digit number as a password using 0-9. (See page 27.)
The new password is now set.
The Password is
.
NOTE
• As a precautionary measure, make a note of your password above, remove it from this manual, and keep it in a familiar place.
68
42D65H_en_h.indd 68
10/29/08 8:27:24 AM
OPERATION MANUAL
ENGLISH
ԋᙔ⥝㵲
LC-42D65H/LC-46D65H
LC-42D65H
LC-46D65H
ϕをᒝᕊ
ᩮᓩྐ⨓㣌⿏៬
LCD COLOUR TELEVISION
ϕをᒝᕊ
OPERATION MANUAL
Printed in Malaysia
㲬‫׹‬㇛Ռࣇ߱
TINS-E027WJZZ
08P12-MA-NF
4246D65H cover.indd 1
12/1/08 6:10:15 PM