Seagate Disc Drives Lyrion Series Product manual

PRODUCT MANUAL
Lyrion Series IDE
ST760211DE
ST760211DEG
ST730212DE
ST730212DEG
Rev. C
February 2007
Revision status summary sheet
Revision
Rev. A
Rev. B
Rev. C
Date
01/04/07
01/31/07
03/01/07
Sheets Affected
Initial Release.
5.
3-4, 7, 10 and 17.
Copyright © 2006 Seagate Technology LLC. All rights reserved. Printed in U.S.A.
Publication number: 100441946, Rev. C February 2007
Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in
the United States and/or other countries. Lyrion Series, SeaTools and SeaTDD are either trademarks or
registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/
or other countries. All other trademarks or registered trademarks are the property of their respective owners.
One gigabyte, or GB, equals one billion bytes when referring to hard drive capacity. Accessible capacity may
vary depending on operating environment and formatting. Quantitative usage examples for various
applications are for illustrative purposes. Actual quantities will vary based on various factors, including file
size, file format, features and application software. Seagate reserves the right to change, without notice,
product offerings or specifications.
Contents
1.0
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1
Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.2
Drive care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.0
Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2
Formatted capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.3
Default logical geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.4
Recording and interface technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.5
Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.6
Time to ready. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.7
Power specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.7.1
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.7.2
Conducted noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.7.3
Voltage tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.7.4
Power-management modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.8
Environmental specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.8.1
Ambient temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.8.2
Temperature gradient. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.8.3
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.8.4
Altitude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.8.5
Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.8.6
Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.8.7
Corrosive environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.9
Acoustics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.10
Electromagnetic immunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.11
Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.12
Agency certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.12.1
Safety certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.12.2
Electromagnetic compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.12.3
European Union Restriction of Hazardous Substances (RoHS) Directive . . . . . 16
2.12.4
China Restriction of Hazardous Substances (RoHS) Directive . . . . . . . . . . . . . 17
2.12.5
FCC verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.0
Configuring and mounting the drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1
Handling and static discharge precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2
Drive installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3
Mounting considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
19
21
22
4.0
Interface description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1
Connector interface signals and connector pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2
Supported ATA commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2.1
Identify Device command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2.2
Set Features command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23
23
25
27
29
5.0
Seagate Technology support services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Lyrion Series IDE Product Manual, Rev. C
i
ii
Lyrion Series IDE Product Manual, Rev. C
List of Figures
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
Lyrion Series (IDE interface) disc drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Typical 3.3V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Location where tri-axial accelerometer will be placed on Lyrion Series drives . . . . . . . . . . . . 11
Drive axis definition for Lyrion Series drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Lyrion Series breather hole location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Lyrion Series proper handling example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Lyrion Series mechanical dimensions—top, side and end view . . . . . . . . . . . . . . . . . . . . . . . 21
Lyrion Series Area for Protective Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Lyrion Series IDE Product Manual, Rev. C
iii
iv
Lyrion Series IDE Product Manual, Rev. C
1.0
Introduction
This manual describes the functional, mechanical and interface specifications for the following Seagate® Lyrion
Series® IDE drives:
• ST760211DE-60GB, ST730212DE-30GB disc drives with an IDE interface.
• ST760211DEG-60GB, ST730212DEG-30GB disc drives with an IDE interface. These models incorporate an
additional free-fall sensor for robust drop performance.
These drives provide the following key features.
• 3,600-RPM spindle speed and a 2-Mbyte buffer combined for superior read/write performance.
• Quiet operation. Fluid Dynamic Bearing (FDB) motor.
• Perpendicular recording heads and EPRML technology, which provide the drives with increased areal density.
• State-of-the-art cache and on-the-fly error-correction algorithms.
• 1500 G nonoperating shock, and 600 G operating shock.
• SeaTools™ diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
Figure 1.
Lyrion Series (IDE interface) disc drive
Lyrion Series IDE Product Manual, Rev. C
1
1.1
Disclaimer
Seagate Technology LLC makes no warranties whatsoever, including any warranty of merchantability, noninfringement, fitness for any particular purpose, or any warranty otherwise arising out of any proposal,
specification or sample. Seagate may not be held liable for any direct, indirect, incidental, special, exemplary,
or consequential damages (including, but not limited to, loss of use, data, or profits; procurement of substitute
goods or services; or business interruptions) however caused and on any theory of liability, whether in contract,
strict liability, or tort (including negligence or otherwise) arising in any way from the use of this kit, even if
advised of the possibility of such damage.
1.2
Drive care
Do not use the Lyrion Series disc drives outside of the ranges of environmental conditions found in Section 2.8,
"Environmental specifications." Doing so may void the warranty of the Lyrion Series disc drive.
2
Lyrion Series IDE Product Manual, Rev. C
2.0
Drive specifications
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal
power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate
ST760211DEG, ST760211DE, ST730212DEG AND ST730212DE model drives.
2.1
Overview
The specifications listed in this table are for quick reference. For details on specification measurement or
definition, see the appropriate section of this manual.
Table 1:
Specifications
Drive specification
ST760211DE,
ST760211DEG
ST730212DE,
ST730212DEG
Formatted Gbytes
60
30
Guaranteed sectors
117,210,240
58,605,120
Bytes per sector (logical)
512
Cache (Mbytes)
2
Recording density, BPI (bits/inch average)
1,025,000
Track density. TPI (tracks/inch average)
165,000
2
Areal density (Gbits/inch average)
169
Spindle speed (RPM)
3,600
Internal data transfer rate OD (Mbits/sec max)
350
Sustained data transfer rate OD (Mbytes/sec)
24.5
I/O data-transfer rate (Mbytes/sec max)
66.7 (UDMA 4)
ATA data-transfer modes supported
PIO modes 0–4;
Multiword DMA modes 0-2;
Ultra DMA modes 0–4
Height
5.0 + 0.15 mm(0.1968 + 0.006 inches)
Width
54.0 +/-0.3 mm (2.1260 +/-0.0118 inches)
Length
71.0 +/-0.3 mm (2.7953 +/-0.0118 inches)
Weight
48.0 gm - 0.1058 lb. (typ)
Average latency (msec)
8.3
Power-on to ready (sec typical)
1.8
Standby to ready (sec typical)
1.8
Startup power (peak at 3.3v) (maximum RMS in 10ms window)
1.15 W
Read/write power (typical 3.3V)
1.0/0.9 W
Performance idle power (typical 3.3V)
0.5 W
Low power idle power (typical 3.3V)
0.3 W
Standby/Sleep power (typical 3.3V)
0.08 W
Voltage tolerance (including noise)
3.3V ± 5%
Lyrion Series IDE Product Manual, Rev. C
3
Table 1:
Specifications
ST760211DE,
ST760211DEG
Drive specification
ST730212DE,
ST730212DEG
Ambient temperature
0° to 60°C (operating)
–40° to 70°C (nonoperating)
Temperature gradient (°C per hour max)
20°C (operating)
30°C (nonoperating)
Relative humidity (noncondensing)
5% to 90% (operating)
5% to 95% (nonoperating)
Relative humidity gradient
30% per hour max
Wet bulb temperature (°C max)
33°C (operating)
40°C (nonoperating)
Altitude, operating
–121.96 m to 3,048 m (–400 ft to 10,000+ ft)
Altitude, nonoperating (below mean sea level, max)
–121.96 m to 12,192 m (–400 ft to 40,000+ ft)
Shock, operating (Gs max at 2 msec)
600
Shock, nonoperating (Gs max at 1 msec)
1500
Vibration, operating
(max displacement may apply below 10 hz)
1.0 Gs (0 to peak, 10–500 Hz) @ 2 oct/min sweep rate
Vibration, nonoperating
(max displacement may apply below 22 hz)
5.0 Gs (0 to peak, 10–500 Hz) @ 0.5 oct/min sweep rate
Idle sound power (bels) (typical)
1.6
Operational sound power (bels) (typical)
2.2
Nonrecoverable read errors
1 per 1014 bits read
Load/Unload (LUL) cycles
300,000 software-controlled
20,000 power loss
Warranty
Per agreement
2.2
Formatted capacity
Model
Formatted
capacity
Guaranteed
sectors
Bytes per
sector (logical)
ST760211DE
ST760211DEG
60 Gbytes
117,210,240
512
ST730212DE
ST730212DEG
30 Gbytes
58,605,120
512
LBA mode addressing
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1,
where n is the number of guaranteed sectors as defined above.
2.3
Default logical geometry
Model
Cylinders
Heads
Sectors
ST760211DE
ST760211DEG
116,280
16
63
ST730212DE
ST730212DEG
58,149
16
63
4
Lyrion Series IDE Product Manual, Rev. C
2.4
Recording and interface technology
Technology
Specification
Interface
IDE (Parallel ATA)
Recording method
Perpendicular Magnetic Recording
Recording density BPI (bits/inch average)
1,025,000
Track density TPI (tracks/inch average)
165,000
Areal density (Gbits/inch2 average)
169
Spindle speed (RPM) (± 0.2%)
3,600
Internal data-transfer rate OD (Mbits/sec max)
350
Sustained data transfer rate OD (Mbytes/sec max)
24.5
I/O data-transfer rate (Mbytes/sec max)
66.7 (UDMA 4)
Cache buffer (Mbytes)
2
2.5
Physical characteristics
Height
(mm)
(inches)
5.0 + 0.15
0.1968 + 0.006
Width
(mm)
(inches)
54.0 +/-0.3
2.1260 +/-0.0118
Length
(mm)
(inches)
71.0 +/-0.3
2.7953 +/-0.0118
Typical weight
(grams)
(pounds)
48.0 (typ)
0.1058 lb. (typ))
Interface Connector
2.6
40-way ZIF
Time to ready
Time to ready
Typical
Power-On to Ready (sec)
1.8
Standby to Ready (sec)
1.8
Lyrion Series IDE Product Manual, Rev. C
5
2.7
Power specifications
The drive receives DC power (+3.3V) through the ZIF connector (IDE interface).
2.7.1
Power consumption
Power requirements for the drives are listed in the table on page 7. Typical power measurements are based on
an average of drives tested, under nominal conditions, using +3.3V input voltage at 25°C ambient temperature.
• Startup mode
Startup power is measured from the time of power-on to the time that the drive spindle reaches operating speed.
• Seek mode
During seek mode, the read/write actuator arm moves toward a specific position on the disc surface and does
not execute a read or write operation. Servo electronics are active. Seek power is measured based on three
random seek operations every 100 msecs.
• Read/write mode
Read/write power is measured with the heads on track, while the head is reading/writing from/to disc. It is
performed with 100 percent duty cycle of read/write operation.
• Performance Idle mode
During Performance Idle mode, the heads are on track but no reading or writing is done. The spindle motor is
spinning at full speed.
• Low power idle mode
During Low power Idle mode, the heads are unloaded but the spindle motor is spinning at full speed. Servo
and read/write electronics are in powered down mode.
• Standby / Sleep mode
During Standby/Sleep mode, the spindle motor is not spinning, and the servo and read/write electronics are
in powered down mode.
6
Lyrion Series IDE Product Manual, Rev. C
Table 2:
DC power
Power Consumption at 3.3V
Average (W)
Startup (max*)
1.15
Read
1.0
Write
0.9
Performance idle (typical)
0.5
Low power idle (typical)
0.3
Standby/Sleep (typical)
0.08
*Maximum is the average of the peak value in 10 msec window
2.7.1.1
Typical current profile
Figure 2.
Typical 3.3V startup and operation current profile
Lyrion Series IDE Product Manual, Rev. C
7
2.7.2
Conducted noise
Input noise ripple is measured at the host system power supply across an equivalent 15-ohm resistive load on
the +3.3 volt line.
Using 3.3-volt power, the drive is expected to operate with a maximum of 70 mV peak-to-peak square-wave
injected noise at up to 20 MHz.
Note. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write
current.
2.7.3
Voltage tolerance
Voltage tolerance (including noise):
3.3V ± 5%
8
Lyrion Series IDE Product Manual, Rev. C
2.7.4
Power-management modes
The drive provides programmable power management to provide greater energy efficiency. The drive features
the following power-management modes:
Table 3:
Power-management modes
Power modes
Heads
Spindle
Buffer
Active (read/write/seek)
Tracking
Rotating
Enabled
Idle, performance
Tracking
Rotating
Enabled
Idle, low power
Parked
Rotating
Disabled
Standby/Sleep
Parked
Stopped
Disabled
• Active mode
The drive is in Active mode during the read/write and seek operations.
• Performance idle mode
The drive enters this mode once the read/write/seek activity is completed. The buffer remains enabled, and
the drive accepts all commands and returns to Active mode any time disc access is necessary.
• Low power idle mode
Drive enters Low Power Idle mode from Performance Idle mode when the Advanced Power Management
Level is set between 80h and FDh, and the Idle timer reaches 2 seconds (default setting). Disc is spinning
and heads are parked and drive accepts all commands and returns to Active mode any time disc access is
necessary.
• Standby/Sleep mode
The drive enters Standby mode when the host sends a Standby Immediate command. When the Advanced
Power Management Level is set lower than 80h (default setting), the drive enters the Standby state after 2
seconds of interface inactivity. If the host has set the standby timer, the drive may also enter the Standby
mode after the expiry of the standby timer. The standby timer can be set using the Standby or Idle command.
In Standby mode, the drive buffer is disabled, the heads are parked and the spindle is at rest. The drive accepts
all commands and returns to Active mode any time disc access is necessary.
Lyrion Series IDE Product Manual, Rev. C
9
2.8
Environmental specifications
2.8.1
Ambient temperature
Ambient temperature is defined as the temperature of the environment immediately surrounding the drive.
Actual drive case temperature should not exceed 70°C (158°F) within the operating ambient conditions. Case
temperature of the drive operating at 60°C ambient may hit a maximum of 70°C at certain parts of the casing.
Above 1,000 feet (305 meters), the maximum operating temperature is derated linearly by 1°C every 1000 feet.
Operating
Nonoperating
2.8.2
0° to 60°C (32° to 140°F)
(70°C max case temperature)
–40° to 70°C (–40° to 158°F)
Temperature gradient
Operating
20°C per hour (36°F per hour max), without condensation
Nonoperating
30°C per hour (54°F per hour max), without condensation
2.8.3
Humidity
2.8.3.1
Relative humidity
Operating 5% to 90% noncondensing (30% per hour max)
Nonoperating 5% to 95% noncondensing (30% per hour max)
2.8.3.2
Wet bulb temperature
Operating 33°C (91.4°F max) [1]
Nonoperating 40°C (104°F max) [2]
[1]
[2]
Operating: Wet bulb temperature is calculated by the operating Temperature and the Relative Humidity levels.
Nonoperating: Wet bulb temperature is calculated by the nonoperating Temperature and the Relative Humidity levels.
2.8.4
Altitude
Operating
Nonoperating
10
–121.96 m to 3,048 m (–400 ft to 10,000+ ft)
–121.96 to 12,192 m (–400 ft to 40,000+ ft)
Lyrion Series IDE Product Manual, Rev. C
2.8.5
Shock
All shock measurements in this section are carried out at drive level. For all linear shock test, operating or
nonoperating, the input shock level is measured at the frame of the drive at the specific location as indicated in
Figure 3 below.
Shock Monitoring Position
Figure 3.
Location where tri-axial accelerometer will be placed on Lyrion Series drives
All shock test cover all the 6 directions, +/- x, y and z axes. The drive axis definition in shown in Figure 4 below.
-Z
-X
-Y
+X
+Y
+Z
Figure 4.
Drive axis definition for Lyrion Series drives
2.8.5.1
Operating shock
The drive is subjected to 10 shocks for each direction. During the shocks, there must be a minimum delay of 3
seconds between shock pulses. Soft errors and automatic retries are allowed during the test. No data loss or
permanent damage occurs during a half sine shock pulse of:
600 G, 2 msec
2.8.5.2
Nonoperating shock
The nonoperating shock level that the drive can experience without incurring any physical damage when subsequently put into operation is 1500 Gs. The same applies for shock levels of 1500 G, 1 msec pulse duration
on fresh drives for each level.
2.8.6
Vibration
All vibration specifications assume that the drive is mounted securely in a fixture that does not have fixture
resonances in the frequency test range.
Lyrion Series IDE Product Manual, Rev. C
11
2.8.6.1
Operating sweep sine vibration
The following lists the maximum operating sweep sine vibration levels that the drive may experience while
meeting the performance standards specified. It consists of a forward and backward sweep from 10 Hz to
500 Hz to 10 Hz. The drive operates without a hard error while being subjected to the following vibration levels.
10 Hz to 500 Hz @ 2 oct/min
2.8.6.2
1.0 Gs (0 to pk). Maximum displacement may apply below 10 Hz.
Operating random vibration
The test consists of 30 minutes of random vibration using the power spectral density (PSD) levels specified in
the table below. The vibration test level is 0.67 Gs RMS. The drive operates without a hard error while being
subjected to the following vibration levels.
Table 4:
2.8.6.3
Operating random vibration profile
Frequency (Hz)
G2/Hz
17
1.1 x E-03
45
1.1 x E-03
48
8.0 x E-03
62
8.0 x E-03
65
1.0 x E-03
150
1.0 x E-03
200
5.0 x E-04
500
5.0 x E-04
Nonoperating sweep sine vibration
The following table lists the maximum nonoperating sweep sine vibration levels that the drive may experience
while meeting the performance standards specified. It consists of a forward and backward sweep from 5 Hz to
500 Hz to 5 Hz. The drive does not incur any physical damage when subsequently put into operation.
10 Hz to 500 Hz @ 0.5 oct/min
5 Hz to 10 Hz
12
5.0 Gs (0 to pk). Maximum displacement may apply below 22 Hz.
25.4 mm peak to peak displacement.
Lyrion Series IDE Product Manual, Rev. C
2.8.6.4
Nonoperating random vibration
The test consists of 15 minutes of random vibration using the power spectral density (PSD) levels specified in
the table below. The vibration test level is 3.01 Gs RMS. The drive does not incur any physical damage when
subsequently put into operation.
Table 5:
2.8.7
Nonoperating random vibration profile.
Frequency (Hz)
G2/Hz
2.5
1.0 x E-03
5
3.0 x E-02
40
1.8 x E-02
500
1.8 x E-02
Corrosive environment
Seagate electronic drive components pass accelerated corrosion testing equivalent to ten years of exposure to
light industrial environments containing sulfurous gases, chlorine and nitric oxide, classes G and H per ASTM
B845. However, this accelerated testing cannot duplicate every potential application environment.
Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corrosive chemicals as electronic drive component reliability can be affected by the installation environment. The silver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide,
chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components
should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or
exposed to an ambient relative humidity greater than 95 percent. Materials used in cabinet fabrication, such as
vulcanized rubber, that can outgas corrosive compounds should be minimized or eliminated. The useful life of
any electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives.
Lyrion Series IDE Product Manual, Rev. C
13
2.9
Acoustics
Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). Discrete
tone penalties are added to the A-weighted sound power (LW) with the following formula only when determining compliance:
LWt(spec) == LW + 0.1Pt + 0.3 < 4.0 (Bels)
where
LW = A-weighted sound power level
pt == Value of discrete tone penalty [==dLt-6.0 (dBA)]
dLt = Tone-to-noise ratio taken in accordance with ISO 7779 at each octave band.
All measurements are consistent with ISO document 7779. Sound power measurements are taken under
essentially free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing
upward.)
Table 6:
Drive level acoustics
Acoustic mode
Idle
Operational
1.6 bels (typ)
2.2 bels (typ)
2.10
Electromagnetic immunity
When properly installed in a representative host system, the drive operates without errors or degradation in
performance when subjected to the radio frequency (RF) environments defined in the following table:
Table 7:
Electromagnetic immunity
Performance
level
Reference
standard
80 to 1,000 MHz, 3 V/m,
80% AM with 1 kHz sine
900 MHz, 3 V/m, 50% pulse modulation @ 200
Hz
A
EN 61000-4-3: 96
ENV 50204: 95
Electrical fast transient
± 1 kV on AC mains, ± 0.5 kV on external I/O
B
EN 61000-4-4: 95
Surge immunity
± 1 kV differential, ± 2 kV common, AC mains
B
EN 61000-4-5: 95
Conducted RF immunity
150 kHz to 80 MHz, 3 Vrms, 80% AM with 1
kHz sine
A
EN 61000-4-6: 97
Voltage dips, interrupts
0% open, 5 seconds
0% short, 5 seconds
40%, 0.10 seconds
70%, 0.01 seconds
C
C
C
B
EN 61000-4-11: 94
Test
Description
Radiated RF immunity
14
Lyrion Series IDE Product Manual, Rev. C
2.11
Reliability
Measurement type
Specification
Nonrecoverable read errors
1 per 1014 bits read, max.
Load/Unload (LUL) cycles
300,000 software-controlled
20,000 power loss
Power On Hours (POH) per year
500 hours
Warranty
Per agreement
Lyrion Series IDE Product Manual, Rev. C
15
2.12
Agency certification
2.12.1
Safety certification
The drives are recognized in accordance with UL60950-1, CAN/CSA-C22.2 No.60950-1, EN60950 and IEC
60950.
2.12.2
Electromagnetic compatibility
Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product
standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and
the immunity levels are defined by EN 55024.
Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous
paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply
with the directives when used in the test systems, we cannot guarantee that all systems will comply with the
directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O
cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators
should confirm EMC compliance and provide CE marking for their products.
Korean RRL
If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic
Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information
and Communication Republic of Korea.
These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab.
• Family name:
Lyrion Series
• Certificate numbers:
STX-S181 (B)
Australian C-Tick (N176)
If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548
1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA).
2.12.3
European Union Restriction of Hazardous Substances (RoHS) Directive
Seagate designs its products to meet environmental protection requirements worldwide, including regulations
restricting certain chemical substances. A new law, the European Union Restriction of Hazardous Substances
(RoHS) Directive, restricts the presence of chemical substances, including Lead, Cadmium, Mercury,
Hexavalent Chromium, PBB and PBDE, in electronic products, effective July 2006. This drive is manufactured
with components and materials that comply with the RoHS Directive.
16
Lyrion Series IDE Product Manual, Rev. C
2.12.4
China Restriction of Hazardous Substances (RoHS) Directive
2.12.4 中国限制危险物品的指令
This product has an Environmental Protection Use Period (EPUP) of 20 years. The following
table contains information mandated by China's "Marking Requirements for Control of Pollution
Caused by Electronic Information Products" Standard.
"O" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is lower
than the threshold defined by the China RoHS MCV Standard.
“O"表示该部件(于同类物品程度上)所含的危险和有毒物质低于中国RoHS MCV标准所定义的门槛值。
"X" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is over
the threshold defined by the China RoHS MCV Standard.
“X "表示该部件(于同类物品程度上)所含的危险和有毒物质超出中国RoHS MCV标准所定义的门槛值。
2.12.5
FCC verification
These drives are intended to be contained solely within a personal computer or similar enclosure (not attached
as an external device). As such, each drive is considered to be a subassembly even when it is individually marketed to the customer. As a subassembly, no Federal Communications Commission verification or certification
of the device is required.
Seagate Technology LLC has tested this device in enclosures as described above to ensure that the total
assembly (enclosure, disc drive, motherboard, power supply, etc.) does comply with the limits for a Class B
computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is
likely to result in interference to radio and television reception.
Radio and television interference. This equipment generates and uses radio frequency energy and if not
installed and used in strict accordance with the manufacturer’s instructions, may cause interference to radio
and television reception.
This equipment is designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause interference to radio or television, which can be determined by turning the equipment on and off,
you are encouraged to try one or more of the following corrective measures:
• Reorient the receiving antenna.
• Move the device to one side or the other of the radio or TV.
• Move the device farther away from the radio or TV.
• Plug the computer into a different outlet so that the receiver and computer are on different branch outlets.
Lyrion Series IDE Product Manual, Rev. C
17
If necessary, you should consult your dealer or an experienced radio/television technician for additional suggestions. You may find helpful the following booklet prepared by the Federal Communications Commission:
How to Identify and Resolve Radio-Television Interference Problems. This booklet is available from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. Refer to publication number 004-000-00345-4.
18
Lyrion Series IDE Product Manual, Rev. C
3.0
Configuring and mounting the drive
This section contains the specifications and instructions for configuring and mounting the drive.
3.1
Handling and static discharge precautions
After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic
discharge (ESD) hazards. Observe the following standard handling and static-discharge precautions:
Caution:
• Do not cover or seal the breather hole! Covering or sealing the breather hole may result in loss of data.
Figure 5.
Lyrion Series breather hole location
• Keep the drive in the electrostatic discharge (ESD) bag until you are ready for installation to limit the drive’s
exposure to ESD.
• Before handling the drives, put on a grounded wrist strap, or ground yourself frequently by touching the metal
chassis of a computer that is plugged into a grounded outlet. Wear a grounded wrist strap throughout the entire
installation procedure.
• Handle the drive only by its edges or frame.
Figure 6.
Lyrion Series proper handling example
• The drive is fragile—handle it with care. Do not press down on the drive top cover or attempt to use a pen to
write on the drive’s label.
• Do not apply more than 6.8N of force to the top cover.
• Always rest the drives on a padded, antistatic surface until you mount it in the system.
Lyrion Series IDE Product Manual, Rev. C
19
• Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids
the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are
used to seal out dirt and contamination.
• If provided, store drive in the protective casing when not in use.
• Turn the power off before installing or removing the drive.
• Do not apply any force to the drive during handling or installation.
• Do not touch the connector pins or the printed circuit board.
• Do not drop the drive.
• Do not expose the drive to wet conditions.
• Do not place the drive near a strong magnetic field.
• Do not expose the drive to extreme temperatures.
• The drive may become hot during operation. Be careful when removing the drive from the host device
immediately after operation.
20
Lyrion Series IDE Product Manual, Rev. C
3.2
Drive installation
See Figure 7 for drive mechanical dimensions.
Follow these installation precautions when inserting the drive:
• Follow instructions for the installation of data storage devices, provided with your device’s user manual.
• Do not obstruct the breather hole on the drive (see Figure 5).
• Handle the drive only by its edges or frame or designated finger grip region during mounting (see Figure 6).
71.00 ± .30
38.00 ± .20
6.21
BREATHER
HOLE
3.20 X2
5.92
6.59
7.78
16.6 ± .20
3.20
2.23
54.00 ± .30
ø1.00 ± .20
6.92
DETAIL 'A'
6.80
3.20 X2
5.00+.15
3.20 X2
25.65
*
( .80 )
CONNECTOR
CENTERLINE
DETAIL 'A'
3.23
Figure 7.
Lyrion Series mechanical dimensions—top, side and end view
Lyrion Series IDE Product Manual, Rev. C
21
3.3
Mounting considerations
• Use an elastic mounting material to protect drives so as to ensure that more shock can be absorbed.
• There are guides along the side for mounting. Refer to figure on areas (refer to Figure 8, shaded area)
where the mounting material can rest for mounting.
• As the drive is a sensitive device, it is not recommended to have any mounting force on the top and bottom
surface of the drive other than the recommended mounting surfaces. Mounting force on non recommended
surfaces shall not exceed 6.8N.”
• The drive can be operated in any orientation but horizontal or vertical orientation is preferred.
• Allow a minimum clearance of 0.012 inches (0.30 mm) around the entire perimeter of the drive for cooling,
with the exception of the mounting edges for better airflow.
• In case the system design warrants bending of the FPC to the hard disc drive, care should be taken to
maximize the radius.
• Mounting materials are available from many third-party vendors.
• The 40-way connector is design to meet minimum 6N Horizontal FPC retention after mating.
• The connector has a specification of 20 insertion cycles.
Figure 8.
22
Lyrion Series Area for Protective Mounting
Lyrion Series IDE Product Manual, Rev. C
4.0
Interface description
The drives use the industry-standard ATA (IDE) interface. It supports ATA programmed input/output (PIO)
modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–4.
4.1
Connector interface signals and connector pins
The following table summarizes the signals on the 40-way ZIF ATA interface connector.
Table 8:
40-way ZIF (IDE interface) connector signals
Pin number
Signal Name
Description
1
Reserved
-
2
Reserved
-
3
RESET-
Hard Reset
4
GROUND
Ground
5
DD07
Data bus bit 7
6
DD08
Data bus bit 8
7
DD06
Data bus bit 6
8
DD09
Data bus bit 9
9
DD05
Data bus bit 5
10
DD10
Data bus bit 10
11
DD04
Data bus bit 4
12
DD11
Data bus bit 11
13
DD03
Data bus bit 3
14
DD12
Data bus bit 12
15
DD02
Data bus bit 2
16
DD13
Data bus bit 13
17
DD01
Data bus bit 1
18
DD14
Data bus bit 14
19
DD00
Data bus bit 0
20
DD15
Data bus bit 15
21
GROUND
Ground
22
DMARQ
DMA request
23
GROUND
Ground
24
DIOW- /
STOP
I/O Write to write to device registers or the data port
Stop during Ultra DMA burst
25
DIOR- /
HDMARDY- /
HSTROBE
I/O Read to read device registers or the data port
Flow control during Ultra DMA data-in burst
Data-out strobe signal for Ultra DMA data-out burst
26
GROUND
Ground
Lyrion Series IDE Product Manual, Rev. C
23
Table 8:
24
40-way ZIF (IDE interface) connector signals
27
IORDY /
DDMARDY- /
DSTROBE
I/O Channel Ready during register access
Flow control during Ultra DMA data-out burst
Data-in strobe signal for Ultra DMA data-in burst
28
GROUND
Ground
29
DMACK-
DMA Acknowledge
30
INTRQ
Interrupt Request
31
DA01
Address bus bit 1
32
PDIAG-
-
33
DA00
Address bus bit 0
34
DA02
Address bus bit 2
35
CS0-
Chip Select 0
36
CS1-
Chip Select 1
37
DASP-
Used to drive external LED when drive is accessed
38
3.3V
Voltage input
39
3.3V
Voltage input
40
Reserved
-
Lyrion Series IDE Product Manual, Rev. C
4.2
Supported ATA commands
The following table lists ATA-standard commands that the drive supports. For a detailed description of the ATA
commands, refer to ATA version 7 specification, Volume 1. (www.t13.org)
Table 9:
Supported commands
Command Name
Command Op-Code
Command Type
NOP
00h
Non data
Recalibrate
10h
Non data
Read Sector(s)
20h
PIO data-in
Read Sector(s) Ext
24h
PIO data-in
Read DMA Ext
25h
DMA data-in
Read Native Max Address Ext
27h
Non data
Read Multiple Ext
29h
PIO data-in
Write Sector(s)
30h
PIO data-out
Write Sector(s) Ext
34h
PIO data-out
Write DMA Ext
35h
DMA data-out
Set Max Address Ext
37h
Non data
Write Multiple Ext
39h
PIO data-out
Read Verify Sector(s)
40h
Non data
Read Verify Sector(s) Ext
42h
Non data
Seek
70h
Non data
Execute Drive Diagnostics
90h
Non data
Download Microcode
92h
PIO data-out
SMART
B0h
SMART Disable Operations
Non data
SMART Enable/Disable Autosave
Non data
SMART Enable Operations
Non data
SMART Execute Off-Line Immediate
Non data
SMART Read Data
PIO data-in
SMART Read Log
PIO data-in
SMART Return Status
Non data
SMART Write Log
PIO data-out
Device Configuration
B1h
Device Configuration Restore
Non data
Device Configuration Freeze Lock
Non data
Device Configuration Identify
PIO data-in
Device Configuration Set
PIO data-out
Read Multiple
C4h
PIO data-in
Write Multiple
C5h
PIO data-out
Set Multiple Mode
C6h
Non data
Read DMA
C8h
DMA data-in
Lyrion Series IDE Product Manual, Rev. C
25
Table 9:
Supported commands
Write DMA
CAh
DMA data-out
Standby Immediate
E0h
Non data
Idle Immediate
E1h
Non data
Standby
E2h
Non data
Idle
E3h
Non data
Read Buffer
E4h
PIO data-in
Check Power Mode
E5h
Non data
Sleep
E6h
Non data
Flush Cache
E7h
Non data
Write Buffer
E8h
PIO data-out
Identify Device
ECh
PIO data-in
Set Features
EFh
Non data
Security Set Password
F1h
PIO data-out
Security Unlock
F2h
PIO data-out
Security Erase Prepare
F3h
Non data
Security Erase Unit
F4h
PIO data-out
Security Freeze Lock
F5h
Non data
Security Disable Password
F6h
PIO data-out
Read Native Max Address
F8h
Non data
Set Max Address
F9h
Non data
26
Lyrion Series IDE Product Manual, Rev. C
4.2.1
Identify Device command
The Identify Device command (command code ECH) transfers information about the drive to the host following
power up. The data is organized as a single 512-byte (256 word) block of data, whose contents are as shown
in the following table.
Word
ATA specification
Value
0
General configuration information bit-significant information
0040h
Bit 15: 0 = ATA device
Bit 7: 1 = removable media
Bit 6: 1 = non-removable/fixed device
10–19
Serial number: (20 ASCII characters)
Serial number
23–26
Firmware revision (8 ASCII character string)
Firmware revision
27–46
Drive model number:
(40 ASCII characters, padded with blanks to end of string)
Model number
47
Bits 7-0: Maximum number of sectors transferred per interrupt on
Read Multiple/ Write Multiple commands
8010h
49
Capabilities
2B00h
Bit 13: 1= Standby timer values specified in ATA-7 are supported
Bit 11: 1= IORDY supported
Bit 10: 0= IORDY may not be disabled
Bit 9 : 1= LBA supported
Bit 8 : 1= DMA supported
53
Bit 2: 1= the fields reported in word 88 are valid
0007h
Bit 1: 1= the fields reported in words (70:64) are valid
59
Bit 8: 1= Multiple sector setting is valid
0110h
Bits 7-0: Current setting for number of sectors transferred during a
Read/Write Multiple command
60–61
Total number of user-addressable LBA sectors available
37E3E40h (30GB)
6FC7C80h (60GB)
63
Bit 10: 1= Multiword DMA mode 2 is selected
xxx7h
0= Multiword DMA mode 2 is not selected
Bit 9: 1= Multiword DMA mode 1 is selected
0= Multiword DMA mode 1 is not selected
Bit 8: 1= Multiword DMA mode 0 is selected
0= Multiword DMA mode 0 is not selected
Bit 2: 1= Multiword DMA mode 2 and below are supported
Bit 1: 1= Multiword DMA mode 1 and below are supported
Bit 0: 1= Multiword DMA mode 0 is supported
64
Bits 7-0: PIO modes supported
0003h
65
Minimum Multiword DMA transfer cycle time per word
Bits 15-0: Cycle time in nanoseconds
0078h
66
Recommended Multiword DMA transfer cycle time
Bits 15-0: Cycle time in nanoseconds
0078h
67
Minimum PIO transfer cycle time without flow control
Bits 15-0: Cycle time in nanoseconds
0078h
68
Minimum PIO transfer cycle time with IORDY flow control
Bits 15-0: Cycle time in nanoseconds
0078h
Lyrion Series IDE Product Manual, Rev. C
27
82
Command sets supported
Bit 14: 1= NOP command supported
Bit 13: 1= READ BUFFER command supported
Bit 12: 1= WRITE BUFFER command supported
Bit 10: 1= Host Protected Area feature set supported
Bit 6: 1= Look-ahead supported
Bit 5: 1= Write cache supported
Bit 3: 1= Mandatory Power Management feature set supported
Bit 1: 1= SECURITY Mode feature set supported
Bit 0: 1= SMART feature set supported
746Bh
83
Command sets supported
Bit 13: 1= FLUSH CACHE EXT command supported
Bit 12: 1= Mandatory FLUSH CACHE command supported
Bit 11: 1= DEVICE CONFIGURATION overlay feature set supported
Bit 10: 1= 48-bit Address feature set supported
Bit 8: 1= SET MAX security extension supported
Bit 5: 1= Power up in Standby feature supported
Bit 3: 1= Advanced Power Management feature set supported
Bit 0: 1= DOWNLOAD MICROCODE command supported
7D29h
84
Command set/feature supported extension
Bit 5: 1= General Purpose Logging feature supported
Bit 1: 1= SMART self-test supported
Bit 0: 1= SMART error logging supported
6063h
85
Command sets referred in word 82 enabled
xxxxh
86
Command sets referred in word 83 enabled
xxxxh
87
Command set/feature default
Bit 5: 1= General Purpose Logging feature supported
Bit 1: 1= SMART self-test supported
Bit 0: 1= SMART error logging supported
Bit 12: 1= Ultra DMA mode 4 is selected
0= Ultra DMA mode 4 is not selected
Bit 11: 1= Ultra DMA mode 3 is selected
0= Ultra DMA mode 3 is not selected
Bit 10: 1= Ultra DMA mode 2 is selected
0= Ultra DMA mode 2 is not selected
Bit 9: 1= Ultra DMA mode 1 is selected
0= Ultra DMA mode 1 is not selected
Bit 8: 1= Ultra DMA mode 0 is selected
0= Ultra DMA mode 0 is not selected
Bit 4: 1= Ultra DMA mode 4 and below are supported
Bit 3: 1= Ultra DMA mode 3 and below are supported
Bit 2: 1= Ultra DMA mode 2 and below are supported
Bit 1: 1= Ultra DMA mode 1 and below are supported
Bit 0: 1= Ultra DMA mode 0 and below are supported
6063h
88
xx1Fh
91
Current Advanced Power Management value (default)
4040h
100-103
Total number of user-addressable LBA sectors available for
37E3E40h (30GB)
6FC7C80h (60GB)
48-bit addressing feature (48-bit addressing not supported)
28
Lyrion Series IDE Product Manual, Rev. C
4.2.2
Set Features command
This command is used by the host to establish parameters that affect the execution of certain drive features.
The supported features determined by the value in the Features register are as shown in Table 11. Read lookahead and write cache are enabled by default upon power on.
Table 10:
Features register values
Feature
Description
02h
Enable Write Cache
03h
Set DMA and PIO transfer modes based on the value in the Sector Count register.
Sector Count register values
08h: Set PIO Transfer Mode 0
09h: Set PIO Transfer Mode 1
0Ah: Set PIO Transfer Mode 2
0Bh: Set PIO Transfer Mode 3
0Ch: Set PIO Transfer Mode 4
20h: Set Multiword Transfer Mode 0.
21h: Set Multiword Transfer Mode 1.
22h: Set Multiword Transfer Mode 2.
40h: Set Ultra DMA mode 0.
41h: Set Ultra DMA mode 1.
42h: Set Ultra DMA mode 2.
44h: Set Ultra DMA mode 4.
05h
Enable Advanced Power Management (APM) with APM level as in the Sector Count register .
Sector Count register values
0h : Reserved
1h – 7Fh : Allow Spin-Down (Standby Mode)
80h – FEh : Disallow Spin-Down (Standby Mode)
FFh : Reserved
55h
Disable Read Look-Ahead.
82h
Disable Write Cache.
85h
Disable Advanced Power Management (APM)
AAh
Enable Read Look-Ahead .
Lyrion Series IDE Product Manual, Rev. C
29
30
Lyrion Series IDE Product Manual, Rev. C
5.0
Seagate Technology support services
Internet
For information regarding Seagate products and services, visit www.seagate.com. Worldwide support is
available 24 hours daily by email for your questions.
Presales Support:
Presales@Seagate.com
Technical Support:
DiscSupport@Seagate.com
Warranty Support:
http://www.seagate.com/support/service/index.html
mySeagate
my.seagate.com is the industry's first Web portal designed specifically for OEMs and distributors. It provides
self-service access to critical applications, personalized content and the tools that allow our partners to
manage their Seagate account functions. Submit pricing requests, orders and returns through a single,
password-protected Web interface-anytime, anywhere in the world.
spp.seagate.com
spp.seagate.com supports Seagate resellers with product information, program benefits and sales tools. You
may register for customized communications that are not available on the web. These communications contain
product launch, EOL, pricing, promotions and other channel-related information. To learn more about the
benefits or to register, go to spp.seagate.com, any time, from anywhere in the world.
Seagate Service Centers
Presales Support
Our Presales Support staff can help you determine which Seagate products are best suited for your specific
application or computer system, as well as product availability and compatibility.
Technical Support
Seagate technical support is available to assist you online at support.seagate.com or through one of our call
centers. Have your system configuration information and your “ST” model number available.
SeaTDD™ (+1-405-324-3655) is a telecommunications device for the deaf (TDD). You can send questions or
comments 24 hours daily and exchange messages with a technical support specialist during normal business
hours for the call center in your region.
Lyrion Series IDE Product Manual, Rev. C
31
Customer Service Operations
Warranty Service
Seagate offers worldwide customer support for Seagate products. Seagate distributors, OEMs and other direct
customers should contact their Seagate Customer Service Operations (CSO) representative for warrantyrelated issues. Resellers or end users of drive products should contact their place of purchase or Seagate
warranty service for assistance. Have your serial number and model or part number available.
Data Recovery Services
Seagate offers data recovery services for all formats and all brands of storage media. Our data recovery
services labs are currently located throughout the world. . Additional information, including an online request
form and data loss prevention resources, is available at http://services.seagate.com/index.aspx
Authorized Service Centers
Seagate Service Centers are available on a global basis for the return of defective products. Contact your
customer support representative for the location nearest you.
USA/Canada/Latin America support services
For an extensive list of telephone numbers to technical support, presales and warranty service in USA/
Canada/Latin America, including business hours, go to the "Contact Us" page on www.seagate.com.
Global Customer Support
Presales, Technical, and Warranty Support
Call Center
Toll-free
USA, Canada,
and Mexico
1-800-SEAGATE
Data Recovery Services
Call Center
USA, Canada,
and Mexico
Toll-free
1-800-475-01435
Direct dial
+1-405-324-4700
Direct dial
+1-905-474-2162
FAX
1-800-475-0158
+1-905-474-2459
Europe, the Middle East and Africa Support Services
For an extensive list of telephone numbers to technical support, presales and warranty service in Europe, the
Middle East and Africa, go to the "Contact Us" page on www.seagate.com.
Asia/Pacific Support Services
For an extensive list of telephone numbers to technical support, presales and warranty service in Asia/Pacific,
go to the "Contact Us" page on www.seagate.com.
32
Lyrion Series IDE Product Manual, Rev. C
Publication feedback survey
We are interested in your comments and suggestions regarding this publication. Please take a few minutes to
participate in our survey at the following URL:
http://survey.seagate.com/survey/techpubs.nsf
Thank you for your time and comments.
Lyrion Series IDE Product Manual, Rev. C
33
34
Lyrion Series IDE Product Manual, Rev. C
Index
A
acoustics 14
Active mode 9
agency certification (regulatory) 16
altitude 10
ambient conditions 3
ambient temperature 10
areal density 1, 5
ATA-standard commands 25
Australian C-Tick 16
B
BPI 5
buffer 1, 5
C
EU RoHS directive 16
European Union 16
F
FCC verification 17
Features register 29
formatted capacity 4
frequency 14
G
guaranteed sectors 4
H
handling 19
heads 1
height 5
humidity 10
cache 1, 5
case temperature 10
CE mark 16
certification 16
China RoHS directive 17
commands 25
compliance 16
conducted noise 8
conducted RF immunity 14
configuring the drive 19
connector pins 23
consumption 7
Corrosive environment 13
C-Tick 16
current profile 7
I
D
Korean RRL 16
DC power 6, 7
density 5
diagnostic software 1
disclaimer 2
drive care 2
drive self-test 1
L
E
electrical fast transient 14
electromagnetic compatibility 16
Electromagnetic Compatibility Directive 16
electromagnetic immunity 14
EMC compliance 16
enclosures 17
environmental specifications 10
EPRML 1
error-correction algorithms 1
errors 15
Lyrion Series IDE Product Manual, Rev. C
I/O data-transfer rate 5
Identify Device command 27
Idle mode power, low 6
Information Technology Equipment 16
interface 5
interface connector signals 23
Interface description 23
interface signals 23
interference 17
internal data-transfer rate OD 5
Introduction 1
ISO document 7779 14
K
LBA mode 4
length 5
logical geometry 4
low power idle 7
Low power idle mode 9
M
maximum temperature 10
mechanical dimensions 21
modes 23
Mounting considerations 22
mounting the drive 19, 21
N
noise 8
35
nominal power 3
nonoperating random vibration 13
nonoperating shock 1, 11
Nonoperating sweep sine vibration 12
nonrecoverable read errors 15
O
Operating random vibration 12
operating shock 1, 11
Operating sweep sine vibration 12
P
performance idle 7
Performance idle mode 9
performance Idle mode 6
perpendicular recording heads 1
physical characteristics 5
pins 23
PIO 23
power consumption 6, 7
power management 9
power specifications 6
power-management modes 9
Power-on to Ready 5
precautions 21
programmable power management 9
protective mounting 22
R
radiated RF immunity 14
radio and television interference 17
radio frequency (RF) 14
read errors 15
read/write mode 6
recording and interface technology 5
recording density 5
recording heads 1
recording method 5
register 29
relative humidity 10
reliability 15
resistance 8
RF 14
RoHS 16, 17
sleep mode 6
sound 14
specifications 3
spindle speed 1, 5
Spinup 7
standby mode 6
Standby to Ready 5
Standby/Sleep 7
Standby/Sleep mode 9
startup mode 6
static-discharge precautions 19
subassembly 17
support services 31
surge immunity 14
sustained data transfer rate 5
T
technical support services 31
temperature 10
temperature gradient 10
theory of liability 2
time to ready 5
tort 2
track density 5
V
Vibration 11
voltage 8
voltage dips, interrupts 14
voltage tolerance 8
W
Warranty 15
warranty 2
weight 5
wet bulb temperature 10
width 5
S
safety certification 16
SeaTools 1
sectors 4
seek mode 6
Set Features command 29
shock 11
signals 23
36
Lyrion Series IDE Product Manual, Rev. C
Seagate Technology LLC
920 Disc Drive, Scotts Valley, California 95066-4544, USA
Publication Number: 100441946, Rev. C, Printed in U.S.A.