Mitsubishi Electric CP3020DE Setup guide

DIGITAL COLOUR PRINTER
MODEL
CP3020DE
OPERATION MANUAL
THIS OPERATION MANUAL IS IMPORTANT
TO YOU.
PLEASE READ IT BEFORE USING YOUR
DIGITAL COLOUR PRINTER.
This digital colour printer complies with the requirements of the EC
Directive 89/336/EEC, 73/23/EEC and 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that
gains proper operation in residential areas, on business and light
industrial premises and on small-scale enterprises, inside as well as
outside of the buildings. All places of operation are characterised by
their connection to the public low voltage power supply system.
CONTENTS
PRECAUTIONS
1
2-4
5
6
7-8
FEATURES
Contents ................................................................................................
Safety precautions ................................................................................
Special features ....................................................................................
Unpacking .............................................................................................
Features and functions ..........................................................................
Front panel ............................................................................................. 7
Rear panel ............................................................................................. 8
Cancelling continuous printing ................................................................ 8
Connections .......................................................................................... 9
CONNECTIONS PREPARATION
Connection with USB interface .............................................................. 9
Before operation .................................................................................... 10-16
Paper sheet set ...................................................................................... 10
Removing the shipping inserts ............................................................... 10
Installation of ink sheet .......................................................................... 11
Installation of print paper ........................................................................ 12-13
Usage and storage of paper sheet set ................................................... 14
Installing printer driver ............................................................................ 15
Troubleshooting .................................................................................... 16-19
Indication on the front panel & countermeasures .................................. 16
Before calling for service ........................................................................ 17
Overcoming paper jams ......................................................................... 18
Repairing a torn ink sheet ...................................................................... 19
TROUBLESHOOTING
Cleaning ................................................................................................ 20
Spec & options ...................................................................................... 21
OTHERS
1
SAFETY PRECAUTIONS
In the interest of safety, please observe the following precautions:
POWER REQUIREMENT
WARNING: THIS APPARATUS MUST BE GROUNDED.
AVERTISSEMENT: CET APPAREIL DOIT ETRE MIS A LA TERRE.
PROTECTIVE MEASURES
PRECAUTIONS
This product is designed for operation on 220-240V AC 50/60Hz. Never connect to any outlet or power supply having a different
voltage or frequency.
FEATURES
IF ABNORMALITIES ARISE, ....
If the printer emits smoke or abnormal sounds, immediately unplug the power cord from the printer or power outlet. Continued
use may be dangerous. Contact your dealer about having the printer checked and serviced.
NEVER INSERT ANY OBJECT INTO THE UNIT
DO NOT SET HEAVY OBJECTS ON TOP OF THE UNIT
Heavy objects can damage the unit and/or cause misoperation.
AVOID DAMAGING THE POWER CORD
Do not set anything heavy on the power cord nor allow it to become pinched, or cut. If the power cord becomes damaged,
replace it immediately to avoid shock hazard or electrical fire.
When the power cord is replaced, use the same type as originally supplied; it is designed to reduce interference to radio & TV
reception.
When unplugging the power cord, hold the plug, and remove it carefully.
KEEP THE UNIT DRY - DO NOT PLACE WATER OR OTHER LIQUID CONTAINERS, FLOWER VASES/POTS ON
TOP OF THE UNIT
DO NOT REMOVE THE CABINET. THERE ARE NO USER SERVICEABLE PARTS INSIDE AND YOU WILL EXPOSE
YOURSELF TO HAZARDOUS VOLTAGES AND/OR YOU MAY CAUSE DAMAGE TO THE UNIT.
OTHERS
Touching internal parts is dangerous, and may cause a malfunction. Contact your dealer to carry out internal checks and
adjustments. Disconnect the power cord before opening the cover to clear a paper jam, etc.
TROUBLESHOOTING
Liquids that get into the unit can cause serious damage to the unit and potential shock or fire danger. If liquid is spilled into or
seeps into the unit, unplug the Power Cord immediately and seek service as soon as possible to avoid additional or possible
damage due to corrosion.
“In the interest of safety, avoid handling of liquids near the unit.”
CONNECTIONS PREPARATION
Nothing other than supplies for this printer should ever be inserted into the printer. Other items can cause a safety hazard and
extensive damage to the mechanism and electronics.
UNPLUG THE POWER CORD DURING A LONG ABSENCE OR DURING AN ELECTRICAL STORM
Turn off the Main Power switch and unplug the power cord during a long absence or during an electrical storm.
WHEN TRANSPORTING THE UNIT
When transporting the unit, remove the ink cassette and paper. And make sure to attach the shipping inserts on the slot or the
rollers may be deformed.
DO NOT INSERT YOUR FINGERS OR ANY OBJECT INTO THE PAPER OUTLET DURING PRINTING
Inside the paper outlet is a roller for taking out the print paper. If you insert your fingers, you may get injured.
DO NOT TOUCH THE THERMAL HEAD
It becomes hot during printing and may remain hot for a time, causing injury. Oils, salts and moisture from your hands will
contaminate the head and may spoil the prints.
CONNECTING CABLES
Use the power cord supplied with the printer.
2
INSTALLATION LOCATIONS
PRECAUTIONS
MAINTAIN GOOD VENTILATION
Ventilation slots and holes are provided on the rear of this unit. Place the unit on a hard and level surface and locate at least 17
cm (6.7 inches) (top) and 5 cm (2 inches) (sides), from walls to insure proper ventilation. When installing the unit in a system
rack, leave space between the unit and the back of the rack.
UNSUITABLE LOCATIONS
FEATURES
Avoid installing the printer in unstable locations with high vibration or in hot-springs areas where hydrogen sulfide and acidic
ions are likely to be generated.
PLACES WITH HIGH HUMIDITY AND DUST
Do not place the unit in locations with high humidity and dust. They can cause extensive damage. Avoid places where unit is
likely to be exposed to oily fumes and vapours.
PLACES LIKELY TO BE EXTREMELY HOT
CONNECTIONS PREPARATION
Places exposed to direct sunlight, or near heating appliances can attain extremely high temperatures which may deform the
cabinet, or cause other damage.
PLACE THE UNIT ON A HORIZONTAL SURFACE
The unit is likely to be affected if it is operated when tilted, inclined or in unstable places.
PROTECT AGAINST DEW FORMATION
When the unit is moved from a cold area into a warm area, moisture can condense inside the unit and prevent operation. Allow
the temperature to stabilize before use.
OPERATING AMBIENT TEMPERATURE RANGE
The operating temperature range is 5°C to 35°C (41°F - 95°F) and humidity of 30 - 80%. When using the unit in a system rack,
make sure that the temperature inside the rack does not exceed this range.
TROUBLESHOOTING
FOR LONG OPERATING LIFE
UNSUITABLE MATERIALS FOR THE PRINTER
Paint coat flaking and plastic deformation are likely to occur if the unit is wiped with chemical dusters, benzine, thinner or any
other solvent, if rubber or PVC items are left in contact with the unit for a extended period, or if the unit is sprayed with
insecticide.
OTHERS
CARE OF THE CABINET
Unplug and clean with a soft cloth slightly moistened with a mild soap and water solution. Allow to dry completely before
operating. Never use petroleum based solutions or abrasive cleaners.
HEAD ABRASION
The thermal print head, like a video head, wears out. When it is worn, it becomes hard to print out fine details of the picture.
Then it is necessary to replace the thermal head. Consult your dealer about having the head replaced.
CONNECTING DEVICES
Read thoroughly the Safety Notices, Cautions and “Operating Precautions” of the instruction booklets for the other devices
connected with the unit.
CAUTION ON RELOCATING
When transporting the unit, make sure it is not likely to be subjected to impacts. This can be a primary cause for damage.
Before moving the unit, make sure to disconnect the power cord from the power outlet, and the cables from the connected
devices. Also make sure to remove the paper tray.
3
SAFETY PRECAUTIONS
OTHER CAUTIONS
PRECAUTIONS
Dust or other foreign matter adhering to the print paper or the ink cassette, or deformation resulting from exposure to extremely
low or high temperatures could cause loss of colour, uneven colour or lines, or wrinkles in the print images.
NOTE:
MEMORIZED IMAGES ARE STORED IN VOLATILE MEMORY AND MAY BE LOST IN THE EVENT OF POWER
FLUCTUATION OR MALFUNCTION.
FEATURES
CONNECTIONS PREPARATION
TROUBLESHOOTING
OTHERS
4
SPECIAL FEATURES
SPECIAL FEATURES
2 printing sizes are available depending on the 3-color YMC ink sheet being used. There are 2 types of ink sheet, matte and gloss,
to achieve the print finish required.
PRINTER DRIVER
The printer driver supports Windows® 98, Windows® Me, Windows® 2000 and Windows® XP.
FEATURES
PRINTING
PRECAUTIONS
2 PRINT SIZES ARE AVAILABLE DEPENDING ON INK SHEET
This printer employs cut paper. Printing speed is approx. 77 seconds (in A4 size print).
HIGH QUALITY PRINTING
High quality print is available in dye sublimation mode. The printer can generate 256 gradients in each YMC, approximately
16,700,000 colours total.
CONNECTIONS PREPARATION
314 PPI HIGH RESOLUTION
314 PPI (Pixels Per Inch) high resolution gives precise illustrations and sharp photo images.
TROUBLESHOOTING
OTHERS
5
UNPACKING
UNPACKING
PRECAUTIONS
Take the unit out of the box by the following procedures. Make sure to check the contents.
Open the top of the box and remove the cardboard.
2
Remove the cushion with its contents.
3
Take the unit out of the box carefully.
4
Unwrap the packing.
FEATURES
1
Be careful not to drop the contents.
CONNECTIONS PREPARATION
Make sure to keep the unit horizontal.
TROUBLESHOOTING
Save the packaging in case you need to ship the printer.
OTHERS
2 CONTENTS
Make sure to check the supplied contents on the cushion.
Power cord (1)
CD-ROM (1)
Ink cassette (1)
Paper tray (1)
Quick setup guide (1)
6
FEATURES & FUNCTIONS
PRECAUTIONS
FRONT PANEL
6
5
7
4
FEATURES
8
3
2
1
1 POWER BUTTON
7 CANCEL BUTTON
2 POWER INDICATOR
8 OPEN BUTTON
Press to turn on power. Press again to turn off power.
When the power is turned on, POWER indicator illuminates.
When the unit is turned on, this lamp lights up.
When a paper jam occurs, this indicator blinks. When the
top cover is open or an error concerning the combination
of print paper and ink sheet occurs, it lights up.
4 MEDIA INDICATOR
5 DATA INDICATOR
NOTE
Do not press OPEN button during printing. Doing so may
cause a print error and malfunction of the printer.
9 PAPER TRAY
Sets print paper. Remove shipping inserts before using.
Printed paper comes out on this tray. Make sure to install
it when using the printer. See page 12 for installing the
tray.
When this unit is overheated or transferring data, this lamp
blinks. It lights up during printing.
6 READY INDICATOR
When this unit is overheated, continuous printing is
cancelled, or during initialisation, this indicator blinks. It lights
up during data transfer, during printing, or when printing
is available.
7
OTHERS
When an error concerning print paper or ink sheet occurs
or this unit is initializing, this indicator blinks. When
an error concerning the combination of print paper and ink
sheet occurs, it lights up.
Press to open the top cover. Open the top cover when
installing an ink sheet or clearing a paper jam.
TROUBLESHOOTING
3 ALARM INDICATOR
Press to cancel continuous printing. See page 8 for
continuous printing.
CONNECTIONS PREPARATION
9
FEATURES & FUNCTIONS
PRECAUTIONS
REAR PANEL
1
FEATURES
CONNECTIONS PREPARATION
2
1 USB PORT
Use this terminal to connect the unit to a device equipped
with USB interface such as a personal computer. See page
9 for connection.
TROUBLESHOOTING
2 AC LINE SOCKET
Connects to the provided power cord. Insert the cord firmly.
CANCELLING CONTINUOUS PRINTING
OTHERS
When printing two or more copies of one image, you can use continuous printing. The number of the copies can be set by the
printer driver. Refer to the Read Me in the CD-ROM for setting the continuous print option.
2 How to cancel continuous printing
1 Press CANCEL button during continuous printing on A4 size image.
2 READY indicator blinks. After completing the current print, continuous printing is cancelled.
NOTE
Cancelling continuous printing is applicable only for A4 size image.
8
CONNECTIONS
PRECAUTIONS
CONNECTION WITH USB INTERFACE
2 CONNECTING WITH A PERSONAL COMPUTER
FEATURES
1 Make sure to turn off the personal computer.
2 Connect this unit with the personal computer as following example.
CONNECTIONS PREPARATION
To USB port
To USB port
Personal computer
Printer
3 Connect the power cord.
TROUBLESHOOTING
2 Use the printer driver to adjust settings for the printer.
The printer driver is included in the CD-ROM. See page 15 for the details.
OTHERS
9
BEFORE OPERATION
FEATURES
PAPER SHEET SET
Make sure to use the following types of paper sheet and ink sheet set.
2 PAPER SHEET SET (Print paper and ink sheet)
Ink sheet size
A4 size
No. of prints
70 (35 sheets x 2 packs)
Usage
Surface-laminated colour print (glossy)
CK3020LL4P
CK3020L4PM
Letter long size
A4 size
60 (30 sheets x 2 packs)
70 (35 sheets x 2 packs)
Surface-laminated colour print (glossy)
Surface-laminated colour print (matte)
CK3020LL4PM
Letter long size
60 (30 sheets x 2 packs)
Surface-laminated colour print (matte)
CONNECTIONS PREPARATION
Product name
CK3020L4P
REMOVING THE SHIPPING INSERTS
shipping insert
2REMOVING THE SHIPPING INSERTS ON THE PAPER TRAY SLOT
1 Hold the tab on the shipping inserts and pull to the center.
2 Remove the other side of shipping inserts in the same way.
POW
PRECAUTIONS
Before printing,
1. Remove the shipping inserts on both sides of the paper tray inserting slot and the spacer inside
the paper tray. (See below)
2. Install the ink cassette with the ink sheet installed. (page 11)
3. Install the paper tray with print paper installed. (pages 12-13)
4. Install printer driver.
ER
NOTE
TROUBLESHOOTING
Do not discard the shipping inserts. When you do not use the printer for a long period or
transport this printer, make sure to attach the shipping inserts on the slot or the rollers may be
deformed.
POW
ER
2REMOVING THE SPACER FROM THE PAPER TRAY
OTHERS
1 Remove the cover on the paper tray.
2 Remove the spacer.
10
PRECAUTIONS
INSTALLATION OF INK SHEET
2INSTALLATION OF INK SHEET
Install the ink sheet (option: supplied with paper sheet set) to the ink cassette before
inserting the ink cassette into the printer.
1 Press OPEN button to open the top cover.
FEATURES
2 If necessary, push the old ink cassette to the left and lift it up to
CONNECTIONS PREPARATION
remove it.
NOTE
Images remain on the ink sheet after printing. If you are working with confidential
documents, you may need to consider alternative ways of disposing of the ink sheet to
maintain security.
3 Remove old ink sheet from the ink cassette.
Do not discard the ink cassette. It can be used repeatedly.
4 Remove the new ink sheet from its packaging.
Touching the dye patches could contaminate the ink sheet, resulting in scratches on
your prints.
Spool
Ink sheet
Handle
Ink cassette
OTHERS
6 Hold the ink cassette by the handle, and slide the spool onto the
Hubs
2 hubs on the left side.
7 Push the ink cassette against the hubs on the left until it engages with
TROUBLESHOOTING
5 Set the new ink sheet on the ink cassette as shown in the figure.
Holder
the 2 holders on the right.
8 Turn the thick spool in the direction shown by the arrow, until the
ink sheet is taut.
9 Close the top cover.
11
BEFORE OPERATION
PRECAUTIONS
INSTALLATION OF PRINT PAPER
The paper tray adjusts to the size of the paper you are installing. Do not force paper that
is too long or too wide into the tray.
NOTE
Use only the tray designed for this printer.
A spacer for protection during transport is attached inside the paper tray when the
printer is shipped from the factory. Remove this spacer when using the printer.
FEATURES
•
•
Plate lever
1 Pull down the plate lever of the paper tray until you hear a click.
CONNECTIONS PREPARATION
2 If necessary, adjust the paper tray to fit the paper you are installing.
Paper width Paper length adjuster
Move the paper width adjuster and paper length adjuster according to the paper size adjuster
you are installing. Move them as shown below.
Paper width adjuster
Raise
Paper length adjuster
Raise
Letter long
Lay down
Lay down
TROUBLESHOOTING
paper size
A4
3 Take the print paper out of the packaging together with the
cardboard for protecting the printing surface.
•
NOTE
The paper may be stuck together. Loosen the pages well before unpacking.
OTHERS
•
The cardboard is placed on the top of the print paper to protect the printing surface.
Take the cardboard together with print paper so that you do not touch the printing
surface.
Loosen the paper before
unpacking.
Tab
4 Place the paper in the tray with the cardboard on the top.
Make sure that the front corners of the stack are under the metal tabs.
12
5 Remove the cardboard.
PRECAUTIONS
•
Remove the cardboard.
NOTE
You can load only one pack of print paper supplied as paper sheet set. When
adding the paper, take care not to exceed the red line on the paper tray. (50
sheets max.)
FEATURES
6 Set the paper cover onto the paper tray.
Take care not to exceed the red line when adding the paper.
CONNECTIONS PREPARATION
7 Install the paper tray in the printer.
8 Raise the stopper.
TROUBLESHOOTING
OTHERS
13
BEFORE OPERATION
PRECAUTIONS
USAGE AND STORAGE OF PAPER SHEET SET
2 BEFORE PRINTING
•
•
•
•
•
•
•
FEATURES
•
Fingerprints or dust on the paper’s surface may degrade print quality and cause paper jams.
When print paper is rapidly transferred from a cool place to a hot place, vapour or dew will be
generated on the paper’s surface causing paper jams or degraded print quality. Leave the
print paper in the room to stabilize its temperature before use.
When print paper or ink sheet runs out during printing, the printing operation stops and the
MEDIA indicator blinks. Set new ink sheet or print paper.
Do not use wet or damaged paper. It may cause malfunction.
Avoid touching or pulling the ink sheet with fingers. It may degrade the print quality.
When the ink sheet is exhausted, replace it with a new one. Used ink sheet is not reusable.
Do not open the print paper and ink sheet until you are ready to use them.
The paper sheet set is a combination of ink sheet and print paper. Use the combination
provided in the box. If the combination is changed, malfunction may occur.
CONNECTIONS PREPARATION
2 AFTER PRINTING
•
•
•
•
•
TROUBLESHOOTING
When the printed paper is touched with a wet hand, the print may be discoloured.
Fading may occur if the print-face is exposed to organic chemical agents which may affect
print paper (e. g. alcohol, ester, ketone based).
Fading will be accelerated upon contact with PVC-based materials (e. g. adhesive tapes,
rubber erasers, etc.).
Do not put a print back into the paper tray. Doing so can cause jams and loss of completed
prints.
Store prints in a cool, dry environment free of chemical contamination. Avoid exposure to
high intensity light sources, particularly fluorescent light and sunlight, which are high in
ultraviolet radiation.
2 STORAGE OF PAPER SHEET SET
Leaving the print paper in contact with PVC-based materials causes the print paper to
discolour or become stained.
•
Never store print paper close to heaters or in hot, humid or dusty places.
Keep print paper in a place where;
Temperature : 5°C - 30°C (41°F - 86°F)
Humidity
: 20% - 60%RH
OTHERS
•
14
PRECAUTIONS
INSTALLING PRINTER DRIVER
The printer driver is required to print the data from a personal computer connected with this unit.
The printer driver for Windows® is supplied with this unit.
Operating conditions
CPD3020W
Applies for Microsoft®Windows®98 and Windows® Me
CPD3020N0
Applies for Microsoft®Windows® 2000 and Windows® XP
FEATURES
Product name
Refer to the “Read me” in the CD-ROM for installing the printer driver.
CONNECTIONS PREPARATION
Windows®98, Windows®Me, Windows® 2000 and Windows® XP are the registered trademarks of Microsoft Corporation in
the U.S.A. and other countries.
TROUBLESHOOTING
OTHERS
15
TROUBLESHOOTING
INDICATION ON THE FRONT PANEL & COUNTERMEASURES
PRECAUTIONS
If for some reason printing is not possible or error occurs during printing, the indicators on the front panel will be lit.
In this case, follow the procedure described below.
: lit
ALARM MEDIA DATA READY
Causes
: blinks
: not lit
Countermeasures
• Install a new set of paper.
Refer to pages 12-13.
The ink sheet is not installed.
• Replace the ink sheet with a new one.
Refer to page 11.
The wrong type of ink sheet is installed.
• Use the correct ink sheet for the installed paper.
(*Note)
• Use them in the correct combination.
The top cover is open.
• Close the top cover.
The temperature of the thermal head
has become too high.
• Wait until the indicator goes off.
Paper jam occurs.
• Refer to page 18 “Overcoming paper jams”.
If the status is not improved by carrying out this
measure, consult your dealer.
Mechanical error occurs.
• Remove the paper tray. Turn off the power and
then turn on it again. After that, install the paper
tray.
TROUBLESHOOTING
*Note :
The ink sheet and the print paper are
not combined correctly.
CONNECTIONS PREPARATION
Print paper is not specified by the printer • Use the specified print paper.
driver.
FEATURES
Paper is used up.
Paper is not installed.
DATA indicator blinks during data transferring.
OTHERS
16
BEFORE CALLING FOR SERVICE
Use the following troubleshooting chart to try to resolve any apparent defect in operation. If you are unable to resolve the
PRECAUTIONS
2
problem, unplug the power cord and contact your dealer.
Symptom
Check and Remedy
No power
(when POWER lamp does not illuminate)
Is the power cord plug disconnected from the outlet?
→Connect the power cord plug to the outlet firmly.
The image is not printed.
FEATURES
After turning the power off, wait for approx. 2 minutes. Then turn on the
power.
Is the cable connected correctly?
Is the image data sent to this printer?
Is the print paper or ink sheet used up?
The paper is not fed.
CONNECTIONS PREPARATION
→Check the status.
Is the combination of the paper size installed and paper tray setting correct?
Is the print paper used up?
Are too many print paper sheets installed in the paper tray?
→Check the status.
The stored image in the memory cannot be
Is the appropriate image data transferred?
enlarged to fill the maximum print area.
→Check the status.
White or coloured lines or scratches appear
on the printed image.
Is there any dirt on the print paper or ink sheet?
→Replace print paper and ink sheet with new one.
Smudges, smears and fingerprints appear
Are there any fingerprints, grease or oil on the paper or ink sheet?
on the printed image.
→Replace print paper and ink sheet with new one.
TROUBLESHOOTING
Is the thermal head dirty?
→Clean up the thermal head. (See page 20 for cleaning.)
OTHERS
17
TROUBLESHOOTING
OVERCOMING PAPER JAMS
PRECAUTIONS
2 CLEARING A PAPER JAM FROM THE INK CASSETTE AREA
1 Press POWER button to turn off the printer.
FEATURES
2 Press OPEN button to open the top cover.
CONNECTIONS PREPARATION
3 Remove the ink cassette.
Push the ink cassette to the left and lift up to remove.
4 Pull out the jammed paper.
Do not touch the thermal head right after printing as it is hot. Touching it may cause a
burn or injury.
TROUBLESHOOTING
5 Install the ink cassette.
NOTE
Do not put partially-fed paper back into the paper tray. Discard any partially-fed paper
from the paper tray.
OTHERS
2 CLEARING A PAPER JAM FROM THE FRONT AREA
1 Press POWER button to turn off the printer.
2 Remove the paper tray.
3 Pull out the jammed paper.
4 Install the paper tray.
When installing the paper tray, make sure to pull down the plate lever of the paper tray
until you hear a click.
NOTE
Do not put partially-fed paper back into the paper tray. Discard any partially-fed paper
from the paper tray.
18
REPAIRING A TORN INK SHEET
Office tape
PRECAUTIONS
1 Position the ink cassette with the torn ink sheet on a flat, clean surface.
2 Place a piece of office tape on the center of the ink sheet.
Supply spool
FEATURES
3 Wind the takeup spool counterclockwise so that the office tape is not seen and the ink sheet is
straight.
4 Install the repaired ink cassette in the printer.
CONNECTIONS PREPARATION
Takeup spool
TROUBLESHOOTING
OTHERS
19
CLEANING
CLEANING
PRECAUTIONS
A small amount of alcohol
Cleaning as indicated below will help maintain stable printer operation and extend the
printer’s life.
Cleaning part
Preparations
How to hold tissue paper
FEATURES
Alcohol (isopropyl alcohol)
Tissue paper (Fold in half about 4 times, and use the folded side to clean.)
Cotton buds
Cleaning kit (Option)*
Other : Cleaner pen (Option)*
*Please ask the dealer about options.
CONNECTIONS PREPARATION
Cleaner pen (Option)
Make sure to turn off the power before cleaning.
1 Turn off the power and press OPEN button to open the top cover.
2 Use a cloth or tissue paper moistened with alcohol to clean the
thermal head, and wipe along the heater line three or four times.
Apply firm, even pressure.
Wipe only the areas shown right.
TROUBLESHOOTING
Wipe the full length of the area (always in one direction).
Use a clean part of the cloth or tissue paper for each wipe.
Guide bar
Heater line
Cover
OTHERS
3 Allow the wiped area to dry for about two minutes.
4 Close the top cover, and turn on the power.
5 If image quality problems are still visible on the print, repeat steps 1 - 4.
NOTE
•
•
Do not damage the thermal head.
When the poor print quality is not corrected even if the head has been
•
cleaned, replacement of the thermal head may be required. Contact your dealer.
The thermal head is hot directly after printing. Wait until the head cools before
cleaning the thermal head.
20
SPEC & OPTIONS
SPECIFICATIONS
Print quality
Ink sheet
Print paper
Operation altitude
Outside dimensions
Weight
Accessories
CONNECTIONS PREPARATION
Supply method
Interface
Power supply
Power consumption
Installation conditions
Digital colour printer
CP3020DE
Thermal Dye Sublimation
3 colour faces progressive printing (yellow, magenta and cyan) and surface lamination
Dot resolution
Max. 3134 x 2508 pixels (A4 size)
314 PPI
Max. 3762 x 2508 pixels (Letter long size) PPI : Pixels Per Inch
256 (8 bits) for each colour ( About 16.7 million colours)
A4 size
Approx. 77 sec./sheet (glossy)
Letter long size
Approx. 90 sec./sheet (glossy)
Special cartridge method
Special cut paper
A4 size
297 x 210mm
Printing area 253.9 x 203.2mm
Letter long size 355.6 x 215.9mm Printing area 304.8 x 203.2mm
Automatic (cut paper)
USB Ver1.1
AC220-240V, 50/60 Hz
1.35A (AC220-240V, 50/60 Hz) during priting (0.2A when not printing)
Temperature
: 5°C - 35°C (41°F - 95°F)
Humidity
: 30% - 80% (No dewing)
Within Horizontal ±5°
402(W) x 231(H) x 378(D) mm
14kg (without paper tray)
Power cord (1), Ink cassette (1), Paper tray (1), CD-ROM (1), Quick setup guide (1)
FEATURES
Number of grades
Printing time
PRECAUTIONS
Class
Model
Printing method
2 Contents of CD-ROM
• Operation manual
• Printer driver
• ReadMe
TROUBLESHOOTING
OPTIONS
Product name
CK3020L4P
CK3020LL4P
CK3020L4PM
CK3020LL4PM
Ink sheet size
A4 size
Letter long size
A4 size
Letter long size
No. of prints
70 (35 sheets x 2 packs)
60 (30 sheets x 2 packs)
70 (35 sheets x 2 packs)
60 (30 sheets x 2 packs)
OTHERS
2 PAPER SHEET SET
Usage
Surface-laminated colour print (glossy)
Surface-laminated colour print (glossy)
Surface-laminated colour print (matte)
Surface-laminated colour print (matte)
21
Mitsubishi Electric Europe B.V.
UK Branch
Travellers Lane, Hatfield, Herts. AL10 8XB, England, U.K.
Phone (0) 1707 276100 FAX (0) 1707 278541
German Branch
Gothaer Strasse 8, 40880 Ratingen ; Postfach 1548, 40835 Ratingen ; Germany
Phone (2102) 486-9250 FAX (2102) 486-7320
French Branch
25, Boulevard des Bouvets - 92741 NANTERRE cedex
Phone (01) 55.68.55.00 FAX (01) 55.68.57.31
Italian Branch
Centro Direzionale Colleoni, Palazzo Perseo-Ingresso 2,
Via Paracelso 12, 20041 Agrate Brianza, (Milano) Italy
Phone (039) 60531
FAX (039) 6057694
Benelux Branch
Nijverheidsweg 23 A, 3641 RP. Postbus 222, 3640 AE Mijdrecht
Phone 02972-82461
FAX 02972-83936
Spanish Branch (Barcelona)
Sucursal en españa
Ctra. de Rubí, 76-80 - Apdo. 420
08190-Sant Cugat del Vallés - (Barcelona) Spaín
Phone 93.5653154
FAX 93.5894388
Manufactured by Mitsubishi Electric Corporation
1 Zusho Baba, Nagaokakyo-city, Kyoto Japan
EE919P134A