ACCELEROMETERS
Potential Application
Model
General Purpose
PA
MA11
MA12
Miniature
MA341/342
MA21
MA23
AG922/AG923
AG913
AG914
+/- 80G
+/- 80G
+/- 10G
327
328
329
Low Frequency
MA311/312
MA321/322
JTF
AG915/AG916
AG917/AG918
AG111-AG113
+/- 1G to +/- 50G
+/- 1G to +/- 50G
+/- 5G to +/- 500G
330
331
332
High Frequency
MAQ36
AG924
+/- 2000G
334
High Temperature
MAQ13
MAQ14
MAQ41
AG908
AG909,AG910
AG925
+/- 800G
+/- 1000G
+/- 100G
335
336
337
Velocity Output
MAV51
AG926,AG927
N/A
338
Acceleration &
Temperature
MAT53
AG930,AG931
+/- 80G
340
+/- 50G
+/- 50G
+/- 1G to +/- 50G
342
343
345
N/A
346
Built-in Signal
Conditioning
Hand Held System
1-888-282-9891
Order Code
AG714
+/- 5G to +/- 1000G
AG901,AG902,AG905
+/- 80G
AG903,AG904
+/- 80G
MA15
AG906,AG907
MAV52
AG928,AG929,AG932
MA331/332
AG919/AG920
VM110/120
Dynamic Range
AG941/AG942
Page
322
323
325
www.honeywell.com/sensotec
321
Model PA Amplified Piezoelectric Accelerometer
Order Code AG714
n
n
n
Enhanced Sensitivity
Case Isolated
Rugged, High Impact
Dimensions
1.60 in.
(max.)
1/4-28 UNF
-2Bx 0.20 in. deep
Wiring Codes
1.00 in.
PTIH-10-6P or
equivalent
Performance
A
B
C
D
E
F
(+) 13.5 to 16.5 VDC
(-) Output/ Supply common
(-) 13.5 to 16.5 VDC
(+) Output (+/- 5 VDC)
Not Applicable
Not Applicable
Dynamic Range................+/- 5 to +/- 1,000 G
Sensitivity................See table
Frequency Range................3 to 5,000 Hz
Full Scale Output................+/- 5 V
Mounted Natural Frequency................30 kHz
Transverse Sensitivity................5% of Full Scale
Environmental
Shock Limits................3,000 G
Vibration Limits................2,000 G
Temperature, Operating................32° to 160° F
Electrical
Input Power................+/- 13.5 to +/- 16.5 VDC
Output Impedance................100 Ohms
Connector................PTIH-10-6P
Mechanical
Weight................3 oz.
Case Material................316 Stainless Steel
Sealing................Welded
Typical System Diagram
Range Codes
Customer Supplied Monitoring System
0V
+
Power
Supply
Dual Power
Supply
-
0V
Model PA
Mating Connectors &
Cable Assembly
+output
Output
Range (G)
5
10
50
100
500
1,000
Sensitivity (mV/G) Range Code
1,000
GJ
500
GK
100
GN
50
GP
10
GR
5
GS
AA111
AA165
-Not RoHS Compliant
How to Order
The order code consists of the product model and the desired range code.
Sample Code:
322
1-888-282-9891
AG714
GJ
Model Code
Range Code
www.honeywell.com/sensotec
Model MA11 Accelerometer
Order Code AG901; AG902; AG905
n
n
n
General Purpose
2 Hz to 10 kHz Usable Frequency Range
IEPE Output
Dimensions
2 pin MS
1.97 in.
Wiring Codes
0.86 in.
AG901
0.98 in. A/F
1/4-28 UNF
Pin A
Pin B
Model MA11 (order code AG901)
(+) Supply
Supply Return
AG902 & AG905
White
Black
Shield
(+) Supply (+) Output
Supply Return
No Connection
2.64 in.
1.5 in.
0.86 in.
0.86 in.
1.0 in. A/F
0.98 in. A/F
1/4-28 UNF
1/4-28 UNF
Model MA11 (order code AG902)
Performance
Environmental
Electrical
1-888-282-9891
Model MA11 (order code AG905)
Dynamic Ranges................+/- 80 G
Sensitivity................100 mV/G +/- 10%
Transverse Sensitivity................Less than 5%
Temperature Sensitivity................0.145/ °F
Frequency Range................2 Hz to 10 kHz +/- 5% 3db limits
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................18 kHz
Acceleration Range................+/- 80 G (dependent on sensitivity)
Temperature, Operating................-70° to 280° F
Shock Limits................2,000 G
Vibration Limits................2,000 G
Sealing
AG901 & AG902................IP67/ Nema 4
AG903................IP68/ Nema 4x
Input................Constant Current
Current Range................0.5 mA to 8 mA
Bias Voltage................12 Vdc
Cable (note 2)
AG902................S/S overbraided PTFE
AG903................PU
Standard Cable Length (note 2)
AG902................16 ft.
AG903................Specify at time of order
Electrical Noise................0.1 mG max.
Isolation................Base isolated
Mating Connector (note 1)................MH002
www.honeywell.com/sensotec
323
Model MA11
Mechanical
Design................Isolated compression in faraday cage
Weight
AG901 & AG902................3.85 oz.
AG903................5.3 oz.
Material................Stainless Steel
Mounting Torque................6 ft.-lb.
Typical System Diagram
BNC Connector
Customer Supplied
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
Model MA11
Power Supply Unit
Model CC2 Constant
current power Supply
Mounting Assemblies
Mating Connectors & Cables (note 3)
Mounting studs
Magnetic mounting
Quick connect mounting
Glued mounting
MS connector to microdot cable
MS mating connector
Sensitivity Codes
Options
Fast Track Manufacture
Sensitivity
100 mV/G
Electrical Termination
2 pin MS (note 1)
Cable (note 2)
Mounting
Arrangement
17b. 1/4-28 UNF
17c. Quickfit Female
Sensitivity
Built to Order
10 mV/G
100 mV/G
1,000 mV/G
10mV/G; 1,000mV/G
Sensitivity Code
GU
GH
GG
Supplied as standard
Notes
1. Only available with AG901.
2. Only available with AG902 & AG903.
3. AG902 & AG903 do not need mating connectors.
-Not RoHS Compliant
How to Order
The order code consists of the product model, the desired range code and the available options.
Sample Code:
AG901
Model Code
324
1-888-282-9891
GU
17b
Sensitivity Code Options Code
www.honeywell.com/sensotec
Model MA12 Accelerometer
Order Code AG903; AG904
n
n
n
General Purpose
2 Hz to 8 kHz Usable Frequency Range
IEPE Output
Dimensions
2.08 in.
1.89 in.
1.02 in.
Wiring Codes
1.02 in.
1.0 in.
AG903
Pin A
Pin B
1.0 in.
(+) Supply
Supply Return
AG904
0.39 in.
White
Black
Shield
0.39 in.
1.14 in.
(+) Supply (+) Output
Supply Return
Connected to Case
1.14 in.
0.24 in.
2 pin MS
Connector
1.35 in.
Model MA12 (order code AG903)
Performance
Environmental
Electrical
Mechanical
1-888-282-9891
0.24 in.
1.35 in.
Model MA12 (order code AG904)
Dynamic Ranges................+/- 80G
Sensitivity................100 mV/G +/- 10%
Transverse Sensitivity................Less than 5%
Temperature Sensitivity................0.145/ °F
Frequency Range................2 Hz to 8 kHz
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................18 kHz
Temperature, Operating................-70° to 280° F
Sealing................IP67/ Nema 4
Input................Constant Current
Current Range................0.5 mA to 8 mA
Bias Voltage................12 Vdc
Cable (note 2)................S/S overbraided PTFE
Electrical Noise................0.1 mg max.
Isolation................Base isolated
Mating Connector (note 1)................MH002
Weight................6 oz.
Material................Stainless Steel
Mounting Torque................6 ft.-lb.
www.honeywell.com/sensotec
325
Model MA12
Typical System Diagram
BNC Connector
Customer Supplied
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
Power Supply Unit
Model CC2 Constant
current power Supply
Model MA12 (Order Code AG903)
Mating Connectors & Cables (note 3)
MS connector to microdot cable
MS mating connector
Sensitivity Codes
Options
Sensitivity
Fast Track Delivery
Sensitivity
100 mV/G
Electrical Termination
Cable length (Specify
at time of ordering)
Built to Order
10mV/G; 1,000mV/G
10 mV/G
100 mV/G
1,000 mV/G
Sensitivity Code
GU
GH
GG
Supplied as standard
Notes
1. Not applicable for AG904.
2. Not applicable for AG903.
3. AG904 does not need mating connectors.
-Not RoHS Compliant
How to Order
The order code consists of the product model and the desired range code.
Sample Code:
326
1-888-282-9891
AG903
GH
Model Code
Sensitivity Code
www.honeywell.com/sensotec
Models MA341 & MA342 Accelerometers
Order Code AG922; AG923
n
n
n
High Frequency
2 Hz to 15 kHz Usable Frequency Range
IEPE Output
Dimensions
Wiring Codes
1.61 in.
1.22 in.
0.59 in.
Black
White
(+) Supply/ (+) Output
Supply Return
0.74 in. A/F
Rotating Nut
0.59 in.
0.59 in. A/F
1/4-28 UNF Male
1/4-28 UNF Female
Model MA341
(order code AG922)
Model MA342
(order code AG923)
Dynamic Ranges................+/- 80G
Sensitivity................100 mV/G +/- 10%
Transverse Sensitivity................Less than 5%
Temperature Sensitivity................0.145/ °F
Frequency Range................2 Hz to 15 kHz +/- 5%
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................22 kHz
Performance
Environmental
Temperature, Operating................-10° to 280° F
Sealing................IP67/ Nema 4
Electrical
Input................Constant Current
Current Range................0.5 mA to 8 mA
Bias Voltage................12 Vdc
Cable................S/S overbraided PTFE
Electrical Noise................0.1 mG max.
Isolation................Base isolated
Mechanical
Weight................1 oz.
Material................Stainless Steel
Mounting Torque................6 ft.-lb.
Sensitivity Codes
Typical System Diagram
Sensitivity
BNC Connector
Customer Supplied
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
Model MA341
Sensitivity Code
10 mV/G
30 mV/G
100 mV/G
1,000 mV/G
GU
GC
GH
GG
Options
Fast Track Delivery
Mounting Assemblies
Power Supply Unit
Mounting studs
Magnetic mounting
Quick connect mounting
Glued mounting
Model CC2 Constant
current power Supply
Sensitivity
100 mV/G
Electrical
Termination
Cable length (Specify
at time of order)
Built to Order
10mV/G; 1,000mV/G;
30 mV/G
-Not RoHS Compliant
How to Order
The order code consists of the product model and the desired range code.
Sample Code:
1-888-282-9891
AG913
GH
Model Code
Sensitivity Code
www.honeywell.com/sensotec
327
Model MA21 Accelerometer
Order Code AG913
n
n
n
Miniature Size
Low Profile
IEPE Output
Dimensions
Wiring Codes
1.63 in.
0.28 in.
White
Black
Shield
0.67 in.
(+) Supply (+) Output
Supply Return
Connected to Case
Use mounting bolt
0.33 in.
0.67 in.
1.12 in.
Performance
Dynamic Ranges................+/- 80 G
Sensitivity................100 mV/G +/- 10% @ 80 Hz
Transverse Sensitivity................Less than 5%
Temperature Sensitivity................0.145/ °F
Frequency Range................2 Hz to 9 kHz
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................18 kHz
Environmental
Temperature, Operating................10° to 280° F
Sealing................IP67/ Nema 4
Electrical
Input................Constant Current
Current Range................0.5 mA to 8 mA
Bias Voltage................12 Vdc
Cable................S/S overbraided PTFE
Standard Cable Length................16 ft.
Electrical Noise................0.1 mG max.
Isolation................Base isolated
Mechanical
Weight................3.90 oz.
Material................Stainless Steel
Mounting Torque................6 ft.-lb.
Sensitivity Codes
Typical System Diagram
Sensitivity
Customer Supplied
BNC Connector
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
Sensitivity Code
10 mV/G
30 mV/G
100 mV/G
1,000 mV/G
GU
GC
GH
GG
Options
Fast Track Delivery
Power Supply Unit
Model MA21
Model CC2 Constant
current power Supply
Sensitivity
100 mV/G
Electrical Termination
Cable length (Specify
at time of order)
Built to Order
10mV/G; 1,000mV/G;
30 mV/G
-Not RoHS Compliant
How to Order
The order code consists of the product model and the desired range code.
Sample Code:
328
1-888-282-9891
AG913
GH
Model Code
Sensitivity Code
www.honeywell.com/sensotec
Model MA23 Accelerometer
Order Code AG914
n
n
n
Miniature Size
Low Profile
IEPE Output
Dimensions
Wiring Codes
Center
Shield
(+) Supply (+) Output
Supply Return
0.55 in.
0.55 in.
Performance
Dynamic Ranges................+/- 10G
Sensitivity................1V/G
Transverse Sensitivity................5% max.
Temperature Sensitivity................0.145/ °F
Frequency Range................5 Hz to 14 kHz +/- 10%
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................25 kHz
Environmental
Temperature, Operating................-70° to 250° F
Sealing................IP65/ Nema 2
Electrical
Input................Constant Current
Current Range................18-30 V
Bias Voltage................12 V
Cable................PTFE
Standard Cable Length................16 ft.
Electrical Noise................0.1 mG max.
Isolation................Base isolated
Mechanical
Weight................0.3 oz.
Material................HE 30 Aluminum
Mounting................Beeswax or adhesive
Sensitivity Codes
Typical System Diagram
BNC Connector
Customer Supplied
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
Model MA23
Power Supply Unit
Model CC2 Constant
current power Supply
Sensitivity
Sensitivity Code
100 mV/G
1000 mV/G
GH
GG
Options
Fast Track Delivery
Sensitivity
1000 mV/G
Electrical
Termination
Cable length(Specify
at time of order)
Built to Order
100mV/G
-Not RoHS Compliant
How to Order
The order code consists of the product model and the desired sensitivity code.
Sample Code:
1-888-282-9891
AG914
GH
Model Code
Sensitivity Code
www.honeywell.com/sensotec
329
Model MA311 & MA312 Accelerometer
Order Code AG915; AG916
n
n
n
DC Response
Amplified Voltage Output
Up to 0-1800 Hz Usable Range
Dimensions
Wiring Codes
4 holes for 6-40 UNF bolts
Red
Blue
Yellow
Green
Shield
0.122 in.
(+) Supply
(-) Supply
(+) Output
(-) Output
Not Connected
1.0 in.
1.30 in.
1.0 in.
1/4-28 UNF
Model MA311 (order code AG915)
Performance
Model MA312 (order code AG916)
Sensitivity................100 mV/G
Transverse Sensitivity................Less than 5%
Temperature Sensitivity................0.145/ °F
Frequency Range................dependent on dynamic range +/- 5% (see below)
+/- 1G & +/- 2G................DC to 250 Hz
+/- 5G................DC to 300 Hz
+/- 10G................DC to 500 Hz
+/- 20G................DC to 700 Hz
+/- 50G................DC to 1 kHz
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................18 kHz
Acceleration Limits................x 20 of dynamic range
Environmental
Temperature, Operating................0° to 180° F
Sealing................IP65/ Nema 2
Electrical
Input................Voltage
Supply Voltage................12-24V @ 7mA
Output Impedance................50 Ohms
Cable................Stainless Steel overbraided PTFE
Standard Cable Length................16 ft.
Electrical Noise................10 mG
Isolation................Base isolated
Mechanical
Weight................1.40 oz.
Case Material................Stainless Steel
Sensitivity Codes
Typical System Diagram
Customer Supplied Monitoring System
+
Power
Supply
-
Power Supply
Isolated from
Ground
Sensitivity
Sensitivity Code
100 mV/G
GH
Options
Fast Track Delivery
+
V
-
Model MA311
How to Order
Electrical
Termination
Cable length (Specify
at time of order)
-Not RoHS Compliant
The order code consists of the product model, the desired range code and the available options.
AG915
Model Code
1-888-282-9891
+/- 1, 2, 5, 10, 20, 50 G
Mounting
17b. 1/4-28 UNF
Arrangement 17c. Quickfit Female
Sample Code:
330
Output
Dynamic
Range
GH
17c
Sensitivity Code Options Code
www.honeywell.com/sensotec
Model MA321 & MA322 Accelerometer
Order Code AG917; AG918
n
n
n
DC Response
4-20 mA Output Proportional to G
Built-in Signal Conditioning
Dimensions
Wiring Codes
4 holes for 6-40 UNF bolts
Red
Blue
Shield
(+) Supply
(+) Supply
Not Connected
0.122 in.
1.0 in.
1.30 in.
1.0 in.
1/4-28 UNF
Model MA321 (order code AG917)
Performance
Model MA322 (order code AG918)
Output................4-20 mA range, 12 mA @ 0 G with sensitivity scaled to a full
range output, i.e. +/-5 G = 1.6 mA/G
Transverse Sensitivity................Less than 5%
Temperature Sensitivity................0.145/ °F
Frequency Range................dependent on dynamic range +/- 5% (see below)
+/- 1G & +/- 2G................DC to 250 Hz
+/- 5G................DC to 300 Hz
+/- 10G................DC to 500 Hz
+/- 20G................DC to 700 Hz
+/- 50G................DC to 1 kHz
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................18 kHz
Acceleration Limits................x 20 of dynamic range
Environmental
Temperature, Operating................0° to 180° F
Sealing................IP65/ Nema 2
Electrical
Input................Voltage
Supply Voltage................10 to 30V
Output Impedance................3,000 Ohms
Cable................Stainless Steel overbraided PTFE
Standard Cable Length................16 ft.
Electrical Noise................10 mG
Isolation................Base isolated
Mechanical
Weight................1.40 oz.
Case Material................Stainless Steel
Typical System Diagram
Display Units
Customer Supplied
SC500
SC2000
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
How to Order
Dynamic
Range
+/- 1, 2, 5, 10, 20, 50 G
Electrical
Termination
Cable length
Mounting studs
Magnetic mounting
Quick connect mounting
Glued mounting
Built to Order
10-32 UNF Female
-Not RoHS Compliant
The order code consists of the product model and the available options.
Sample Code:
1-888-282-9891
Fast Track Delivery
Mounting
17b. 1/4-28 UNF
Arrangement 17c. Quickfit Female
Mounting Assemblies
Model MA322
Options
AG918
17c
Model Code
Options Code
www.honeywell.com/sensotec
331
Model JTF General Purpose Accelerometer
Order Code AG111; AG112; AG113
n
n
n
Zero Hertz Operation
Easy Calibration
Low Impedance
Dimensions
Model JTF
Bolt Mount
1.0 in.
Model JTF
Screw Mount
Model JTF
Stud Mount
0.75 in.
Wiring Codes
0.77 in. 0.50 in.
Screw Mount
Red
Black
Green
White
ø0.16 in. typically
Sensitive
Axis
0.4 in.
(+)
(-)
(-)
(+)
Excitation
Excitation
Output
Output
Bolt or Stud Mount
Model JTF Screw Mount (order code AG111)
- Output
- Excitation
+ Output
+ Excitation
ø0.26 in.
7/8 Hex
1.0 in.
Sensitive
Axis 0.75 in.
ø1.0 in.
1/4-28 UNF x 1/4
Model JTF Bolt Mount (order code AG112)
Performance
Temperature, Operating................-40° to 250° F
Temperature, Compensated................70° to 200 ° (note 1)
Temperature Effect
Zero (max.)................0.02% Full Scale/ ° F
Sensitivity (max.)................+/- 10%
Electrical
1-888-282-9891
Model JTF Stud Mount (order code AG113)
Dynamic Ranges................+/- 5 to 500 Peak G
Sensitivity................See table
Transverse Sensitivity................Less than 5%
Frequency Range................See table
Frequency Response................+/- 5% (note 1)
Non-Linearity & Hysteresis................+/- 1% Full Scale
Mounted Base Resonance................See table
Damping Ratio (nominal)................0.7 C @ 70° F
Environmental
332
Sensitive
Axis
Excitation (calibration)................5 VDC
Excitation (acceptable)................Up to 10 VDC
Electrical Termination
AG111................Teflon Cable 5’
AG112 & AG113................10-32 UNF 4-pin connector
Mating Connector................10-32 UNF socket plug (note 2)
Available Range
(peak G)
Sensitivity Nominal
(mV/G)
Sensitivity Range
(mV/G)
Usable Frequency
Range (Hz)
Mounted Resonant
Frequency (Hz)
+/- 5
+/- 10
+/- 20
+/- 50
+/- 100
+/- 200
+/- 500
8
3.8
1.8
0.8
0.38
0.18
0.08
5.0-12
2.4-5.0
1.2-2.4
0.5-1.2
0.24-0.5
0.12-0.24
0.05-0.12
0-300
0-400
0-600
0-1,000
0-1,500
0-2,000
0-2,400
800
1,00
1,500
2,000s
3,000
4,000
5,000
www.honeywell.com/sensotec
Model JTF
Mechanical
Acceleration Limits (any direction)................20x
Weight
AG111................1 oz.
AG112 & AG113................2.1 oz.
Case Material
AG111................Anodized Aluminum
AG112 & AG113................Stainless Steel
Typical System Diagram
Customer Supplied Monitoring System
+
Power
Supply
Power Supply
-
+
V
Output
-
Model JTF Screw Mount
Options
Triaxial Mounting Block (order code AA235) for Model AG111
Same Day Ship
#6-32 -2B UNC JTF mounting
holes, typically on three sides
Built to Order
0.500 in.
AG111
Range
10, 50G
5, 20, 100, 200, 500G
1.00 in.
cubic
AG112& AG113
Range
Clearance for 1/4” socket head cap
screw, to secure mounting block
5, 10, 20, 50, 100, 200, 500G
Specifications
Range Codes
Available Ranges
Sensitivity
Usable Frequency Mounted Resonant
(peak G)
Nominal (mV/G) Range (mV/G)
Range (Hz)
Frequency (Hz)
GJ
+/-5
8
5.0-12
0-300
800
GK
+/-10
3.8
2.4-5.0
0-400
1000
GL
+/-20
1.8
1.2-2.4
0-600
1500
GN
+/-50
0.8
0.5-1.2
0-1000
2000
GP
+/-100
0.38
0.24-0.5
0-1500
3000
GV
+/-200
0.18
0.12-0.24
0-2000
4000
GR
+/-500
0.08
0.05-0.12
0-2400
5000
Notes
1. Output voltage is proportional to input voltage.
2. Only available with AG112 & AG113.
-Not RoHS Compliant
How to Order
The order code consists of the product model and the desired range code.
Sample Code:
1-888-282-9891
AG111
GV
Model Code
Range Code
www.honeywell.com/sensotec
333
Model MAQ36 Accelerometer
Order Code AG924
n
n
n
Sub-Miniature
Charge Output
45 kHz Mounted Frequency
Dimensions
Wiring Codes
0.33 in.
Center
Shield
(+) Output
Case Ground
10-32 UNF Microdot Connector
0.47 in.
10-32 UNF
Dynamic Ranges................+/- 2,000 G
Sensitivity................5 pC/g +/- 10%
Transverse Sensitivity................Less than 5%
Temperature Sensitivity................0.045/ °F
Frequency Range................1 Hz to 30 kHz
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................45 kHz
Performance
Environmental
Temperature, Operating................-70° to 480° F
Sealing................IP67/ Nema 4
Electrical
Input................Self Generating
Output................Charge
Charge Amplitude Required................CA2
Mating Connector................Microdot
Capacitance................300 pf
Isolation................Base isolated
Mechanical
Weight................0.25 oz.
Material................Stainless Steel
Mounting Torque................2 ft.-lb.
Sensitivity Codes
Typical System Diagram
Customer Supplied
Mating Connectors & Cables
Sensitivity
Sensitivity Code
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
Microdot mating connector
0.5 pC/G
5 pC/G
50 pC/G
YA
YB
YF
Model MAQ36
Options
Fast Track Delivery
Mounting Assemblies
Sensitivity
5 pC/G
Built to Order
0.5 pC/g; 50 pC/G
Mounting studs
Magnetic mounting
Quick connect mounting
Glued mounting
AA957 Power Supply
How to Order
The order code consists of the product model and the desired range code.
Sample Code:
334
1-888-282-9891
-Not RoHS Compliant
AG924
YA
Model Code
Sensitivity Code
www.honeywell.com/sensotec
Model MAQ13 Accelerometer
Order Code AG908
n
n
n
n
Small Size
Charge Output
30 kHz Mounted Frequency
General Purpose
Dimensions
Wiring Codes
10-32 UNF Microdot Connector
Center
Shield
0.55 in.
(+) Output
Case Ground
0.94 in.
0.59 in. A/F
10-32 UNF
Performance
Dynamic Ranges................+/- 800 G
Sensitivity................10, 20, 30 pC/G
Transverse Sensitivity................Less than 5%
Temperature Sensitivity................0.145/ °F
Frequency Range................dependent on charge amplifier
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................30 kHz
Environmental
Temperature, Operating................-70° to 480° F
Sealing................IP67/ Nema 4
Electrical
Input................Self Generating
Output................Charge
Charge Amplitude Required................CA2
Mating Connector................Microdot
Capacitance................450 pf
Isolation................Base isolated
Mechanical
Weight................1.00 oz.
Material................Stainless Steel
Mounting Torque................2 ft.-lb.
Sensitivity Codes
Typical System Diagram
Customer Supplied
Mating Connectors & Cables
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
Microdot mating connector
Model MAQ13
Sensitivity
Sensitivity Code
YC
YD
YE
10 pC/G
20 pC/G
30 pC/G
Options
Fast Track Delivery
Sensitivity
20 pC/G
Built to Order
10, 30 pC/G
Mounting Assemblies
AA957 Power Supply
Mounting studs
Magnetic mounting
Quick connect mounting
Glued mounting
-Not RoHS Compliant
How to Order
The order code consists of the product model and the desired sensitivity code.
Sample Code:
1-888-282-9891
AG908
YC
Model Code
Sensitivity Code
www.honeywell.com/sensotec
335
Model MAQ14 Accelerometer
Order Code AG909; AG910
n
n
n
n
Small Size
Charge Output
18 kHz Mounted Frequency
General Purpose
Dimensions
Wiring Codes
0.75 in.
0.75 in.
A/F
0.79 in.
AG909
0.55 in.
0.59 in. A/F
0.79 in.
1/4-28 UNF
Center
Shield
10-32 UNF
Microdot
Connector
10-32 UNF
(+) Output
Case Ground
AG910
Center
Shield
(+) Output
Case Ground
Model MAQ14
(order code AG909)
Model MAQ14
(order code AG910)
Performance
Dynamic Ranges................1,000 G
Sensitivity................10, 30, 50 pC/G
Transverse Sensitivity................Less than 5%
Temperature Sensitivity................0.145/ °F
Frequency Range................1 Hz to 10 kHz
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................18 kHz
Environmental
Temperature, Operating................-70° to 480° F
Sealing................IP67/ Nema 4
Electrical
Input................Self Generating
Standard Cable Length................16 ft. (only AG910)
Charge Amplitude Required................CA2
Mating Connector................Microdot (only AG909)
Capacitance................450 pf
Isolation................Base isolated
Mechanical
Weight................1.20 oz.
Material................Stainless Steel
Mounting Torque................2 ft.-lb.
Typical System Diagram
Mating Connectors & Cables
Customer Supplied
Microdot mating connector
(only for AG909)
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
Sensitivity Codes
Sensitivity
Sensitivity Code
10 pC/G
30 pC/G
50 pC/G
YC
YE
YF
Model MAQ14
Options
Fast Track Delivery
Sensitivity
50 pC/G
Built to Order
10, 30 pC/G
Mounting Assemblies
AA957 Power Supply
Mounting studs
Magnetic mounting
Quick connect mounting
Glued mounting
-Not RoHS Compliant
How to Order
The order code consists of the product model and the desired sensitivity code.
Sample Code:
336
1-888-282-9891
AG909
YC
Model Code
Sensitivity Code
www.honeywell.com/sensotec
Model MAQ41 Accelerometer
Order Code AG925
n
n
n
Enhanced Output
Charge Output
10 kHz Mounted Frequency
Dimensions
Wiring Codes
TNC connector
Center
Shield
1.26 in.
(+) Output
Case Ground
1.65 in.
1.26 in. A/F
1/4-28 UNF
Dynamic Ranges................+/- 100 G
Sensitivity................1,100 pC/G +/- 10%
Transverse Sensitivity................Less than 5%
Temperature Sensitivity................0.145/ °F
Frequency Range................dependent on charge amplifier
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................10 kHz
Performance
Environmental
Temperature, Operating................-70° to 480° F
Sealing................IP67/ Nema 4
Electrical
Input................Self Generating
Charge Amplitude Required................CA2
Mating Connector................TNC
Capacitance................4,000 pf
Isolation................Non-isolated
Mechanical
Weight................3.50 oz.
Material................Stainless Steel
Mounting Torque................6 ft.-lb.
Typical System Diagram
Mating Connectors & Cables
Customer Supplied
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
TNC mating connector
Model MAQ41
Mounting Assemblies
Mounting studs
Magnetic mounting
Quick connect mounting
Glued mounting
AA957 Power Supply
-Not RoHS Compliant
How to Order
Sample Code:
AG925
Model Code
1-888-282-9891
www.honeywell.com/sensotec
337
Model MAV51 Accelerometer
Order Code AG926; AG927
n
n
n
Velocity Measurement
5 Hz to 4 kHz +/- 5% Usable Frequency Range
IEPE Output
Dimensions
Wiring Codes
2 pin MS
Connector
AG926
Pin A
Pin B
1.97 in.
1.5 in.
0.86 in.
0.98 in. A/F
1/4-28 UNF
Female
Model MAV51
(order code AG926)
Performance
Environmental
Electrical
Mechanical
338
1-888-282-9891
(+) Supply/ (+) Output
Supply Return
0.86 in.
1.0 in. A/F
AG927
1/4-28 UNF
Female
White
Black
Shield
Model MAV51
(order code AG927)
(+) Supply (+) Output
Supply Return
Not Connected
Sensitivity................100 mV/in./sec
Transverse Sensitivity................Less than 5%
Temperature Sensitivity................0.145/ °F
Frequency Range................5 Hz to 4 kHz +/- 5%
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................18 kHz nominal
Temperature, Operating................-10° to 280° F
Sealing................IP67/ Nema 4
Input................Constant Current
Current Range................0.5 mA to 8 mA
Bias Voltage................12 Vdc
Cable (note 1)................S/S overbraided PTFE
Standard Cable Length (note 1)................16 ft.
Electrical Noise................0.3 mG max.
Isolation................Base isolated
Mating Connector (note 2)................MH002
Weight................3.88 oz.
Material................Stainless Steel
Mounting Torque................6 ft.-lb.
www.honeywell.com/sensotec
Model MAV51
Typical System Diagram
BNC Connector
Customer Supplied
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
Model MAV51
Power Supply Unit
Model CC2 Constant
current power Supply
Mounting Assemblies
Mating Connectors & Cables (note 2)
Mounting studs
Magnetic mounting
Quick connect mounting
Glued mounting
MH002 mating connector
Options
Notes
1. Not applicable for AG926.
Fast Track Delivery
2. Not applicable for AG927.
Mounting
Arrangement
17b. 1/4-28 UNF
17c. Quickfit Female
-Not RoHS Compliant
How to Order
The order code consists of the product model and the available options.
Sample Code:
1-888-282-9891
AG926
17c
Model Code
Options Code
www.honeywell.com/sensotec
339
Model MAT53 Accelerometer
Order Code AG930; AG931
n
n
n
n
Temperature & Vibration Output
2 Hz to 10 kHz Usable Frequency Range
IEPE Output
Current O/P for Temperature
Wiring Codes
Dimensions
AG930
Pin A
Pin B
Pin C
3 pin 62GB
Connector
AG931
1.97 in.
1.5 in.
0.86 in.
0.98 in. A/F
1/4-28 UNF
Female
Model MAT53
(order code AG930)
Performance
Environmental
Electrical
Mechanical
340
1-888-282-9891
(+) Supply/ (+) Output
Supply Return
(+) Temperature
0.86 in.
White
Black
Shield
0.98 in. A/F
(+) Supply (+) Output
(+) Temperature
Supply Return
1/4-28 UNF
Female
Model MAT53
(order code AG931)
Dynamic Ranges................+/- 80G
Sensitivity................100 mV/G +/- 10%
Temperature Range................0 - 200°F
Transverse Sensitivity................Less than 5%
Temperature Sensitivity................10 mV/ °F
Frequency Range................2 Hz to 10 kHz +/- 5%
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................18 kHz
Temperature, Operating................-10° to 280° F
Sealing................IP67/ Nema 4
Input................Constant Current
Current Range................0.5 mA to 8 mA
Bias Voltage................12 Vdc
Cable (note 1)................S/S overbraided PTFE
Standard Cable Length (note 1)................16 ft.
Electrical Noise................0.3 mG max.
Isolation................Base isolated
Mating Connector (note 2)................MH008
Weight................3.80 oz.
Material................Stainless Steel
Mounting Torque................6 ft.-lb.
www.honeywell.com/sensotec
Model MAT53
Typical System Diagram
Customer Supplied Monitoring System
0.5-8.0 mA
+18 to 30 Volts
1F
Pin A
Pin C
Pin B
Volts Out
A.C.
0 Volts
200 KOhm
Model MAT53
(Order Code AG930)
Mounting Assemblies
Mating Connectors & Cables (note 2)
Mounting studs
Magnetic mounting
Quick connect mounting
Glued mounting
MS connector to microdot cable
MS mating connector
Sensitivity Codes
Options
Sensitivity
Fast Track Delivery
Sensitivity
100 mV/G
Electrical Termination
Cable (note 2)
Mounting
Arrangement
17b. 1/4-28 UNF
17c. Quickfit Female
Built to Order
10 mV/G
30 mV/G
100 mV/G
1,000 mV/G
10mV/G; 1,000mV/G;
30 mV/G
Sensitivity Code
GU
GB
GH
GG
Notes
1. Not applicable for AG930.
2. Not applicable for AG931.
-Not RoHS Compliant
How to Order
The order code consists of the product model, the desired range code and the available options.
Sample Code:
AG930
Model Code
1-888-282-9891
GH
17c
Sensitivity Code Options Code
www.honeywell.com/sensotec
341
Model MA15 Accelerometer
Order Code AG906; AG907
n
n
n
General Purpose
4-20 mA Proportional to G
2 Hz to 1 kHz Usable Range
Dimensions
Wiring Codes
3 pin 62GB
connector
2.24 in.
1.06 in.
AG906
1.69 in.
1.14 in. A/F
1/4-28 UNF
Model MA15
(order code AG906)
1.06 in.
Pin A
Pin B
Pin C
1.10 in. A/F
AG907
1/4-28 UNF
Model MA15
(order code AG907)
(+) Supply
No Connection
(+) Output
White
Black
Shield
Dynamic Ranges................+/- 1G to +/-50 G
Range................4-20 mA for 50 G
Transverse Sensitivity................Less than 5%
Temperature Sensitivity................0.145/ °F
Frequency Range................2 Hz to 1 kHz +/- 10%
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................5 kHz
Performance
Environmental
Electrical
Temperature, Operating................-10° to 210° F
Sealing................IP67/ Nema 4
Input................Voltage
Output................4-20 mA for 50 G
Supply Voltage................12-32 V
Cable (AG907)................Stainless Steel overbraided PTFE
Standard Cable Length (AG907)................16 ft.
Mating Connector (AG906)................MH008
Electrical Noise................0.3 mG max.
Isolation................Base isolated
Mechanical
Weight................5 oz.
Material................Stainless Steel
Mounting Torque................6 ft.-lb.
Typical System Diagram
Range Codes
Range
Mating Connectors and Cables
Customer Supplied
MH008
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
Mounting Assemblies
Model MA15
(+) Supply
(+) Output
Case Ground
Mounting Studs
Magnetic Mounting
Quick Connect Mounting
Glued Mounting
Range Code
GE
GF
GJ
GK
GL
GN
1G
2G
5G
10G
20G
50G
Options
Fast Track Delivery
Display Units
SC500
SC2000
Dynamic
50G
Electrical
Termination
17b. 1/4-28 UNF
17c. Quickfit Female
Built to Order
1, 2, 5, 10, 20G
-Not RoHS Compliant
How to Order
The order code consists of the product model, the desired range code and the available options.
Sample Code:
342
1-888-282-9891
AG906
GE
17c
Model Code
Range Code
Options Code
www.honeywell.com/sensotec
Model MAV52 Accelerometer
Order Code AG928; AG932; AG929
n
n
n
n
Velocity Measurement
2 Hz to 10 kHz Usable Frequency Range
4-20 mA Proportional to Velocity
Submersible Option
Wiring Codes
Dimensions
AG928
3 pin 62GB
connector
2.24 in.
Pin A
Pin B
Pin C
1.06 in.
(+) ve Accel.
No Connection
0 volts
AG932
1.14 in. A/F
White
Black
Shield
1/4-28 UNF
Model MAV52 (order code AG928)
(+) Supply
(+) Output
Case Ground
AG929
Red
Blue
Shield
(+) Supply
(+) Output
Case Ground
2.87 in.
1.69 in.
1.06 in.
1.06 in.
1.10 in. A/F
1/4-28 UNF
Model MAV52 (order code AG932)
Performance
Environmental
Electrical
1-888-282-9891
1.14 in. A/F
1/4-28 UNF
Model MAV52 (order code AG929)
Dynamic Ranges................50G
Sensitivity................1 in./sec for 4-20 mA
Transverse Sensitivity................Less than 5%
Temperature Sensitivity................0.145/ °F
Frequency Range................2 Hz to 1 kHz +/- 10%
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................5 kHz
Temperature, Operating................-10° to 210° F
Sealing
AG928 & AG932................IP67/ Nema 4
AG929................IP68/ Nema 4x
Input................Voltage
Output................4-20 mA
Supply Voltage................12-32 V
Current Range................0.5 mA to 8 mA
Bias Voltage................12 Vdc
Cable (note 2)
AG932................Stainless Steel armored PTFE
AG929................PU
Standard Cable Length (note 2)................16 ft.
Electrical Noise................0.3 mG max.
Isolation................Base isolated
Mating Connector (note 1)................MH008
www.honeywell.com/sensotec
343
Model MAV52
Mechanical
Weight................5 oz.
Material................Stainless Steel
Mounting Torque................6 ft.-lb.
Typical System Diagram
Customer Supplied
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
Model MAV52
Display Units
SC500
SC2000
Mounting Assemblies
Mating Connectors & Cables (note 1)
Mounting studs
Magnetic mounting
Quick connect mounting
Glued mounting
MH008 mating connector
Range Codes
Options
Fast Track Delivery
Sensitivity
1 in./sec RMS
Electrical Termination
Cable length (note 2)
Mounting
Arrangement
17b. 1/4-28 UNF
17c. Quickfit Female
Range
Built to Order
0.5 in./sec RMS
1 in./sec RMS
2 in./sec RMS
4 in./sec RMS
0.5, 2, 4 in/sec RMS
Range Code
SA
SB
SC
SD
Supplied as standard
Notes
1. Only available with AG928.
2. Only available with AG932 & AG929.
-Not RoHS Compliant
How to Order
The order code consists of the product model, the desired range code and the available options.
Sample Code:
344
1-888-282-9891
AG928
SA
17b
Model Code
Range Code
Options Code
www.honeywell.com/sensotec
Model MA331 & MA332 Accelerometer
Order Code AG919; AG920
n
n
n
DC Response
mV Output
For Use With Strain Gage Amps
4 holes for 6-40 UNF bolts
Dimensions
Wiring Codes
Red
Blue
Yellow
Green
Shield
0.122 in.
(+) Supply
(-) Supply
(+) Output
(-) Output
Not Connected
1.0 in.
1.30 in.
1.0 in.
Model MA331 (order code AG919)
Performance
1/4-28 UNF
Model MA332 (order code AG920)
Output................15-75 mV Full Scale
Transverse Sensitivity................Less than 5%
Temperature Sensitivity................0.145/ °F
Frequency Range................dependent on dynamic range +/- 5% (see below)
+/- 1G & +/- 2G................DC to 250 Hz
+/- 5G................DC to 300 Hz
+/- 10G................DC to 500 Hz
+/- 20G................DC to 700 Hz
+/- 50G................DC to 1 kHz
Amplitude Linearity................Better than 1% Linearity
Mounted Base Resonance................18 kHz
Acceleration Limits................x 20 of dynamic range
Environmental
Temperature, Operating................0° to 180° F
Sealing................IP65/ Nema 2
Electrical
Input................Voltage
Supply Voltage................5V @ 7mA
Output Impedance................3,000 Ohms
Cable................Stainless Steel overbraided PTFE
Standard Cable Length................16 ft.
Electrical Noise................10 mG
Isolation................Base isolated
Mechanical
Weight................1.40 oz.
Case Material................Stainless Steel
Range Codes
Typical System Diagram
Customer Supplied Monitoring System
+
Power
Supply
Power Supply
Isolated from
- Ground
Range
1G
2G
5G
10G
20G
50G
Options
Range Code
GE
GF
GJ
GK
GL
GN
Fast Track Delivery Built to Order
Dynamic
Range
1, 2, 5, 10, 20, 50G
Electrical
Termination
Cable length
Mounting
17b. 1/4-28 UNF
10-32 UNF
Arrangement 17c. Quickfit Female Female
+
V
Output
-
Model MA331
-Not RoHS Compliant
How to Order
The order code consists of the product model, the desired range code and the available options.
Sample Code:
1-888-282-9891
AG919
GE
17c
Model Code
Range Code
Options Code
www.honeywell.com/sensotec
345
Models VM110 & VM120 Vibration Meter Kit
Order Code AG941; AG942
n
n
n
Hand Held
LCD Display
Battery Powered
Typical System Diagram
Built-in Accelerometer
Acceleration................2, 20, 200 G
Ranges
Velocity................2 in./sec., 20 in./sec., 200 in./sec.
Displacement................2 thou, 20 thou, 200 thou
Upper Frequency................Selectable low pass filters of 5 kHz, 10 kHz and 20 kHz
Lower Frequency................Fixed, Acceleration: 5 Hz, Velocity: 10 Hz, Displacement: 15Hz
Detector................RMS or Peak switch selectable
Display................1/2 in., 3.5 digit LCD (3 readings per second)
Performance
Electrical
Accuracy
Acceleration................1.5% RMS, 3% Peak
Velocity................2.5% RMS, 4% Peak
Displacement................3.5% RMS, 5% Peak
Noise
Acceleration................2 mG RMS; 6 mG Peak
Velocity................0.01 in./sec. RMS; 0.03 in./sec. Peak
Displacement................0.02 in. RMS; 0.06 in. Peak
Input................10 mV/G from hand held accelerometer or other MA Series via cal hood
Output................AC 200 mV, full range as selected; DC 200 mV, full range as selected
Power................(2) PP3 9-volt battery, low battery indicator on display
Battery life 15 hours approximately
Kit Contents................(1) Vibration Meter; (1) Hand held probe; (1) Magnet;
(1) 4 in. Spike; (1) Carrying case
Accessories
MTN/1100C
MTN/1100
MTN/1020
MTN/CA42
MTN/CA43
MTN/2100
MTN/CA61
MTN/MM1
MTN/PS1
MTN/PS2
MTN/PS3
MTN/PS4
MTN/HE1
Options
Other MA Series accelerometers
100 mV/G accelerometer, 5 meters integral PTFE cable
100 mV/G, 2 pin MS connector
100 mV/G, TNC connector
Coiled cable assembly 2 pin MS to IA110 for use with MTN/1100
Coiled cable assembly TNC to IA110 for use with MTN/1020
Hand held probe
IA110 adapter for use with MTN/1100C
Magnet, 1/4” UNF mounting, 35 mm, strength 20 kg
Hand held spike, 25 mm, 1/4” UNF mounting
Hand held spike, 100 mm, 1/4” UNF mounting
Hand held spike, 150 mm, 1/4” UNF mounting
Hand held spike, 300 mm, 1/4” UNF mounting
Carrying case with foam cut outs
-Not RoHS Compliant
How to Order
Sample Code:
AG941
Model Code
346
1-888-282-9891
www.honeywell.com/sensotec