Where Do I Start?
Refer to the code tables at the end of this guide to
locate additional programming codes.
Before you begin using your remote, complete the
following initial setup tasks.
Install the Batteries
POWER
TV
DVD
STB
AUX
FF
REW
CORD
RE
/VIDEO
TV
PAUSE
B
STOP
PLAY
SKIP
ACK
Visit the Quick Reference Section
VOD
MENU
MENU
RD
CO IN
DVR
ONIDEMAND
LIVE TV
GS
RE
PHONE
EXIT
MULTISCREEN
GUIDE
GUIDE
VOL
1
MUTE
JUMP
MUTE
JUMP
CH
PG
2
3
ABC
DEF
4
5
6
GHI
JKL
MNO
7
8
9
PQRS
TUV
WXYZ
0
#
CLEAR
SPACE
ENTER
Use the Quick Reference section of this guide to
familiarize yourself with the remote and the functions
of its various keys. Knowing the function and location
of the keys on the remote will assist you when you are
programming the remote.
Program the Remote
INFO
INTERACT
SEARCH
The remote requires two AA batteries (alkaline
recommended). A diagram in the battery compartment
of the remote indicates proper placement of the
batteries. When batteries are properly installed, the
light on the remote blinks each time a key is
pressed.
To learn how to program your remote, refer to the
sections What Devices Can I Control, What
Devices Do I Want to Control, and Program the
Remote to Control My Devices for further
instructions.
Find a Place to Store Your Remote
Keeping up with one remote is much easier than
keeping up with four or five remotes. However, it is still
a good idea to find a storage location for your remote.
The AT6400 is not a toy. It should be kept out of the
reach of children under the age of 6 years.
Program the Remote to
Control My Devices
AT6400 AllTouch
IR Universal
Remote Control
User Guide
Welcome to the Ultimate
Control Experience
Your remote is initially programmed to only operate
your set-top. You will need to set up the remote to
operate your other devices using its TV, DVD, and
AUX modes. The TV key may be programmed to
operate a standard or high-definition television
(HDTV). The DVD key may be programmed to
operate a DVD player. The AUX key may be
programmed to operate a VCR, a receiver, an
amplifier, or a Home Theater in a Box (HTIB)
system. If the remote provides only limited
functionality for a device, you can look for a code
that provides more functionality.
Quick Reference
1. Refer to the code tables at the end of this guide to
locate the information for the device you want to
program.
Note: If your device is not listed, you may be able to
program the remote using the Auto-Search function.
Go to What If None of the Codes Work for
instructions.
2. Turn on the device that you want to assign to a
mode key.
3. Press and hold the appropriate mode key (TV,
DVD, or AUX) on the remote, and then press and
hold the OK key.
4. Release both keys and the mode keys blink twice.
5. Enter the first 4-digit setup code for the device using
the numeric keys (0-9) on the remote. The mode key
blinks three times to indicate that the code entry was
accepted.
Notes:
• When an invalid code is entered, the selected
mode key displays a long flash to indicate that
you have not entered the code correctly.
• Should the remote time-out before you complete
the code setup, you must start over. This is
indicated by one long flash of the red LED.
6. Point the remote at the device, and press POWER
to test the device.
7. Did the device power off?
• If yes, write this code number in the table found
in this guide. You may need it again if the device
code is accidentally erased.
• If no, repeat this procedure from step 3 using a
different setup code.
Note: If none of the codes listed for your brand of
device operate the device correctly, go to What If
None of the Codes Work for instructions.
8. Repeat this procedure for each mode key you want
to program.
Device Control
Note: Read the procedures in this section thoroughly
before beginning. You need to be prepared to
observe the behavior of the remote.
Auto-Search Features
Consider the following items when using AutoSearch:
• The Auto-Search function begins searching from
the first code.
• If a valid code is not found, the green backlight blinks
twice and the remote returns to normal operation.
• If any other key is pressed except PLAY, ENTER,
POWER, EXIT, REW, FF, or numeric keys 1 through
4 (when programming the AUX mode key), the
mode key displays a long red flash (error message)
and the remote returns to normal operation.
• Should the remote time-out before you complete the
Auto-Search function you must start over. This is
indicated by one long flash of the red LED.
• If the device is not listed and the Auto-Search function
is unable to find a usable code, you may need to use
the original remote provided with the device.
Auto-Searching the Code Library for
TV or DVD Mode Codes
(Program Code 922)
Note: This procedure only applies to TVs and DVDs.
1. Turn on the device you that you want to assign to the
TV or DVD key.
2. Point the remote at the device.
3. Press and while holding a selected mode key (TV or
DVD), press the OK key. For example, to search for
a TV code, press and hold TV and OK at the same
time.
4. Release both keys and all the mode keys blink
twice.
Viewing and Browsing Control
Turns devices on or off
Accesses the phone menu
Phone
5. Enter the programming code 9 2 2 by pressing the
numeric keys on the remote. The mode key you
selected in step 3 blinks twice to indicate a
successful entry.
6. Point the remote toward the device, and press
PLAY.
7. Your device powers off when it finds the correct
code. Then, choose one of the following options:
• Save code and exit – Press the ENTER key on
the remote to program the code in the remote and
the mode key flashes three times indicating
successful entry.
• Step forward – Press the fast-forward (FF) key
on the remote to step ahead through the codes
one at a time. Then, return to step 6.
• Step backward – Press the rewind (REW) key on
the remote to step back through the codes one at
a time. Then, return to step 6.
• Exit without saving the code – Press the EXIT
key on the remote. The selected mode key
flashes three times and returns to normal
operation.
• Send the current code – Press the POWER key
on the remote to send the current code. If the
device turns back on, press the ENTER key. If the
device does not turn on, return to step 6.
• Continue with auto-search function – Press the
PLAY key on the remote to continue with the autosearch function. Then, return to step 6.
Auto-Searching the Code Library for
AUX Mode Codes (Program Code 922)
1. Turn on the device that you want to assign to the
AUX key.
2. Point the remote at the device.
3. Press and while holding the AUX key, press the OK
key.
4. Release both the AUX key and the OK key and all
the mode keys blink twice.
5. Enter the programming code 9 2 2 by pressing the
numeric keys on the remote. The AUX key blinks
twice indicating a successful entry.
6. Press the PLAY key, choose one of the following
device categories and then, using the number keys
on the remote, press its assigned number (1 – 4)
based on the following list:
1 = VCRs
2 = Receiver/Tuners
3 = Amplifiers
4 = HTIB
Note: The device categories are number-coded to
provide a more direct programming method.
DVD
AUX
FF
REW
CORD
RE
VIDEO
TV/
PAUSE
STOP
DVR/VOD/
DVD/VCR
Control
TV
MENU
VOD
DVD
Enables DVD mode functions
ON
MENU
Your remote is initially programmed to only operate
your set-top. Therefore, you must program the
remote to operate your TV, VCR, or other devices.
See Program the Remote to Control My
Devices to learn how to enter device codes and
program your remote.
MENU
RD
CO IN
DVR
EXIT
Viewing
and
Browsing
Control
INFO
INTERACT
SEARCH
Sound
Control
MULTISCREEN
GUIDE
GUIDE
CH
PG
VOL
MUTE
JUMP
MUTE
JUMP
Enables AUX mode functions
ONIDEMAND
LIVE TV
GS
RE
PHONE
Notes:
• In STB mode, these keys control DVR and VOD
functions.
• In DVD and AUX modes, these keys may control
your DVD or VCR depending on how you have
programmed the remote.
How Does A Universal
Remote Control Work?
4
GHI
Clear
2
3
ABC
DEF
5
JKL
6
MNO
7
8
9
PQRS
TUV
WXYZ
0
#
SPACE
ENTER
CLEAR
Numeric
Keys
5
JKL
3
Enters channel numbers, text, and
remote codes. Also use to enter your
parental control PIN
DEF
6
MNO
7
8
9
TUV
WXYZ
CLEAR
Clears text and numbers in text fields
Selects and deselects screen items
#
Enters and saves (stores) an entry
ENTER
Clears all menu screens and returns to
broadcast TV
INTERACT
PAUSE
Accesses the Search menu
What Devices Can I Control?
The four mode keys arched across the top of the
remote tell the remote which device you want to
operate.
Accesses INTERACT content
(Internet and interactive content)
TV
Pauses DVD, VCR, VOD, or DVR content
Enter
PLAY
Plays DVD, VCR, VOD, or DVR content
/VIDEO
TV
REW
MULTISCREEN
BACK
SKIP
DVD
AUX
Displays text information about the selected
program
GUIDE
Displays or closes the IPG
JUMP
Jumps to next section or switches to last
channel viewed
Rewinds or fast forwards through
DVR or VOD content
Skips backward or forward through
DVR or VOD content
CH
PG
During programming, if the remote times out before
you complete the code setup, you will need to start
over. This is indicated by one long flash of the red
LED.
What Devices Do I Want to
Control?
To help you keep track of the devices you want to
control, list the type of devices you have (including
brand) in the following table. Then, use the code tables
at the end of this guide to locate the codes for your
device. For example, look under TV Group if you
need to program the remote to operate your TV. If you
have two devices that use the same key, you must
reassign the TV, DVD, or the AUX key. The STB key
cannot be reassigned. Go to Reassign Mode Keys.
Otherwise, go to Program the Remote to Control
My Devices for additional instructions.
Turns MultiScreen mode on or off
T12121
Scrolls through available TV or video input
sources
FF
POWER
STB
INFO
T13264
2
ABC
4
GHI
PQRS
SPACE
Records the selected program
Stops DVD, VCR, VOD, or DVR content
Numeric Keys
Moves through selections
EXIT
1. Press and hold the STB mode key on the remote.
2. Without releasing the STB key, press and hold the
OK key.
3. Release both the keys and all mode keys flash
twice.
4. Enter the programming code 9 4 4 by pressing the
numeric keys on the remote. The STB mode key
blinks twice indicating a successful entry.
5. Press and release the mode key associated with the
type of device you want to control, and then press
and release the mode key that you want to change.
The newly assigned mode key blinks one time
indicating a successful entry.
There are also green LEDs that illuminate several
keys whenever the remote is in use. They stay
illuminated for a short time after a key is pressed.
Mutes sound
MUTE
0
SEARCH
STOP
Adjusts volume
VOL
Accesses the On Demand menu
Views live TV
Reassigning Mode Keys
(Program Code 944)
There are red LEDs underneath each of the four
mode keys (STB, TV, DVD, and AUX) that flash
each time a key is pressed to show which device
the key is currently controlling.
Accesses the Interactive Program Guide
(IPG)
Accesses the DVR list of recordings
You can reassign a mode key to operate a different
device. For example, you can reassign the AUX key
to operate a DVD player or a TV. If you reassign a
key, be sure you update the table found in this guide.
LED Indicators
1
LIVEITV
DVR, VOD, DVD, VCR Control
CORD
RE
1
ORDING
EC
DVR
S
AUX
VOD
IDE MAN D
Reassign Mode Keys
Note: These keys are assigned to the TV when the
TV mode key is programmed with a valid code.
Enables TV mode functions
R
B
PLAY
SKIP
ACK
Enables set-top mode functions
Device
Control
7. Point the remote toward the device, and press
PLAY.
8. Your device powers off when it finds the correct
code. Then, choose one of the following options:
• Save code and exit – Press the ENTER key on
the remote to program the code in the remote and
the mode key flashes three times indicating
successful entry.
• Step forward – Press the fast-forward (FF) key
on the remote to step ahead through the codes
one at a time. Then, return to step 7.
• Step backward – Press the rewind (REW) key on
the remote to step back through the codes one at
a time. Then, return to step 7.
• Exit without saving the code – Press the EXIT
key on the remote. The selected mode key
flashes three times and returns to normal
operation.
• Send the current code – Press the POWER key
on the remote to send the current code. If the
device turns back on, press the ENTER key. If the
device does not turn on, return to step 7.
• Continue with auto-search function – Press the
PLAY key on the remote to continue with the autosearch function. Then, return to step 7.
Sound Control
STB
POWER
TV
STB
Important Information
About Your Remote
You tell the remote which type of device you want
to operate using the four keys arched across the
top of the remote. These keys, known as mode
keys, are labeled STB, TV, DVD, and AUX.
Each mode key is associated with a specific
device. As an example, after programming the
remote, if you want the remote to operate your
TV, you simply press the TV key. Other keys you
press on the remote, thereafter, should operate
your TV. Want to switch the remote to operate a
different device? Just press the mode key for the
next device you want to operate. In this guide, you
will learn which types of devices you can control
and how to program the remote to control your
specific devices.
Assigning a Device Code to a Mode Key
If none of the codes listed for your brand of device
operate the device correctly, or if your device is not
listed in the codes table, you can use the Auto-Search
function to search through the code library for a valid
code. This section provides procedures for using the
Auto-Search function to search the code library for
TV, DVD and AUX mode codes.
POWER
Your new AT6400 AllTouch ® Infrared (IR)
Universal Remote Control (remote) is a true
universal remote, functioning as four remotes in
one. As one example, you can use this remote to
operate your set-top, your TV, and two other
devices, such as a DVD player and VCR.
Note: You must use the IR remote within line of
sight of the set-top to operate the set-top
correctly.
Note: You have the option to assign some remote
keys to operate one device type only. For example,
you may want to assign volume control to the TV only.
If this is the case, you can reprogram power, volume,
and channel control using procedures found later in
this guide.
What If None of the Codes
Work?
Selects the next channel, up or down, when
watching TV. Moves up or down one page
in the IPG and in some menu screens
Each mode key is associated with different types of
devices. You can use each mode key to control one
of its associated devices:
Mode Key
STB
Associated Devices
IP gateway set-top
TV*
TVs (including HDTVs)
DVD*
DVD players
AUX*
VCRs, receivers, tuners, and Home
Theater in a Box (HTIB)
* These keys can be reassigned to control different
devices. Go to the Reassign Mode Keys section of
this guide for instructions.
Mode
Key
Device
Type
Brand
Code
Example:
DVD
DVD
Sony
2066
TV
DVD
AUX
Some common examples:
• To program the AUX key to operate your DVD
player, press DVD and then AUX.
• To program the DVD key to operate your TV,
press TV and then DVD.
Change Volume Control
By default, once the TV mode key is programmed with
a valid code, the volume and mute buttons control
your TV. These keys adjust the volume of your TV
higher, lower, or temporarily switch the volume off
(Mute), regardless of whether the remote is in STB,
TV, DVD, or AUX mode.
If you prefer, you can choose to have the volume and
mute buttons always control a different device rather
than your TV, such as a home theater receiver. (See
Controlling Volume for One Device below.) Note
that you must first program one of the mode keys,
such as AUX, with a valid code for that device.
Alternatively, you can choose to have the volume and
mute buttons control different devices when the
remote is in different modes. For example, you might
want to control the volume on your TV when in TV
mode, but the volume on your home theater receiver
when in AUX mode. (See Controlling Volume for
Different Devices below.) Note that not all devices
have volume controls, so if you choose this option, the
volume and mute buttons may do nothing in some
modes, such as STB and DVD.
Controlling Volume for One Device
(Program Code 955)
1. Press and hold the STB mode key on the remote.
2. Without releasing the STB key, press and hold the
OK key.
3. Release both keys and all mode keys blink twice.
4. Enter the programming code 9 5 5 by pressing the
number keys on the remote. The STB mode key
blinks twice indicating a successful entry.
5. Press and release the mode key for the device you
want the volume keys to control. For example, if you
want to control volume through your TV, press and
release TV. The selected mode key blinks three
times to indicate a successful entry.
The volume keys now control only one device
whether you are in STB, TV, DVD, or AUX mode.
Controlling Volume for Different
Devices (Program Code 955)
1. Complete steps 1 through 4 of the Controlling
Volume for One Device procedure.
2. Press and release the Enter key. The STB mode
key blinks three times to indicate a successful entry.
After you press the Enter key, the volume keys control
the device assigned to that mode. For example, in TV
mode, the volume keys control volume for the TV only.
Notes:
• If any other key is pressed except the Mode keys and
the ENTER key, the remote does not accept any
changes or updates. The STB mode key displays a
long red flash and the remote returns to normal
operation.
• If the remote times out before you complete
programming volume control, the remote does not
accept any changes. You must start over from step
1 of this procedure.
Change Channel Control
The remote is set by default to control channel
selection on the set-top. You can also program
channel control to control any of the TV, DVD, or AUX
mode devices provided the device allows for channel
control assignment. Or, you can set the channel
selection control programming to control channels (or
page up or down) for all of the devices programmed
in the four mode keys. Otherwise, you can only
control channels (or page up or down) on a specific
device, for example, the TV or DVD.
Note: The channel control keys include CH/Page,
Jump, and the numeric keys 0 through 9.
Controlling Channels for One Device
(Program Code 966)
1. Press and hold the STB mode key on the remote.
2. Without releasing the STB key, press and hold the
OK key.
3. Release both keys and all mode keys blink twice.
4. Enter the programming code 9 6 6 by pressing the
numeric keys on the remote. The STB mode key
blinks twice to indicate a successful entry.
5. Press and release the mode key for the device you
want the channel key to control. For example, if you
want to control channels on your TV, press and
release TV. The selected mode key blinks three
times to indicate a successful entry.
The channel key now always controls the device
associated with the mode you selected in this
procedure, whether in STB, TV, DVD, or AUX mode.
Controlling Channels for Different
Devices (Program Code 966)
1. Complete steps 1 through 4 of the Controlling
Channels for One Device procedure.
2. Press and release the Enter key. The STB mode
key blinks three times to indicate a successful
entry.
After you press the Enter key, the channel key now
controls the device associated with the mode key you
select. For example, in TV mode, the channel key
controls the TV, but in STB mode, the channel key
controls the set-top.
Notes:
• If any other key is pressed except the Mode keys
and the ENTER key, the remote does not accept
any changes or updates. The STB mode key
displays a long red flash and the remote returns to
normal operation.
• If the remote times out before you complete
programming channel selection control, the remote
does not accept any changes. You must start over
from step 1 of this procedure.
Change Power Control
The POWER key on the remote is set by default to
control the power switch on one device at a time, in
either mode (STB, TV, DVD, or AUX). When in STB
mode, the remote switches the set-top from OFF
(standby mode) to ON, or from ON to OFF (standby
mode). However, you can alternatively program the
POWER key to control the power switch on up to four
devices at the same time, instead of controlling one
device at a time. It is highly recommended that you
set up the POWER key to turn on and off your set-top
and your TV at the same time. Turning off the set-top
saves electricity and extends the life of the box. When
turned off, the set-top can still record scheduled
programs on its DVR and perform any other
necessary functions.
Controlling Power for Multiple
Devices at Once (Program Code 977)
1. Press and hold the STB mode key on the remote.
2. Without releasing the STB key, press and hold the
OK key.
3. Release both keys and all mode keys blink twice.
4. Enter the programming code 9 7 7 by pressing the
numeric keys on the remote. The STB mode key
blinks twice to indicate a successful entry.
5. For the first device, press the STB key. The STB
mode key blinks twice.
6. For the second device, press the applicable mode
key (TV, DVD, or AUX). The selected mode key
blinks twice.
7. Repeat step 6 for up to two more devices (total of
four devices).
8. Press the ENTER key to complete the power switch
control programming. The last selected mode key
blinks 3 times to indicate a successful entry.
Example: In an example scenario where you press
only TV in steps 6 and 7, the POWER key controls
both the set-top and the TV at the same time,
regardless of which mode the remote is in (STB, TV,
DVD, or AUX).
Controlling Power for One Device
at a Time (Program Code 977)
1. Complete steps 1 through 4 of the Controlling
Power for Multiple Devices at Once procedure.
2. Press the ENTER key to complete the power switch
control programming. The last selected mode key
blinks 3 times to indicate a successful entry.
After you select a mode, the POWER key controls the
device assigned to that mode. For example, in TV
mode, the remote controls power for the TV only.
Notes:
• If any other key is pressed except the Mode keys
and the ENTER key, the remote does not accept
any changes or updates. The STB mode key
displays a long red flash and the remote returns to
normal operation.
• If the remote times out before you complete
programming power switch control, the remote does
not accept any changes. You must start over from
step 1 of this procedure.
Put It Back the Way I Got It
You can return all advanced functions back to their
original settings by resetting the remote to factory
default settings. Resetting the remote to factory
default settings removes all of the programming you
have entered for the remote. You must reprogram the
remote to restore your original settings.
Resetting the Remote to Factory
Default Settings (Program Code 900)
1. Press and hold the STB mode key on the remote.
2. Without releasing the STB key, press and hold the
OK key.
3. Release both keys and all mode keys blink twice.
4. Enter the programming code 9 0 0 by pressing the
numeric keys on the remote. The STB mode key
blinks four times to indicate you have successfully
reset the remote to factory default settings.
Notes:
• If any other key is pressed except the numeric
keys, the remote does not accept any changes or
updates. The STB mode key displays a long red
flash and the remote returns to normal operation.
• If the remote times out before you complete the
factory default reset procedure, the remote does
not accept any changes. You must start over from
step 1 of this procedure.
Troubleshooting
If there is no response when you press the keys on
the remote, please check the following items before
calling for service.
Check the Batteries
• Are the batteries inserted correctly?
• Check the battery condition for leakage.
• Replace with new alkaline batteries.
TV, continued
TV, continued
DVD, continued
Amplifier, continued
VCR, continued
VCR, continued
Dynatech
1004
Sylvania
CyberHome
2083, 2325
Panasonic
6001, 6040
Canon
3016
Teknika
Electroband
1002
1004, 1007, 1018, 1027, 1153, 1056, 1057, 1059, 1060,
1124, 1150, 1145, 1279, 1296, 1387, 1464
Cytron
2374
Parasound
6059
Carver
3036
Thomas
3211
Electrohome
1002, 1003, 1004,1018, 1021
Symphonic
1024, 1031, 1036, 1105, 1280, 1384
Daewoo
2058, 2062, 2137, 2138, 2190
Philips
6047
CineVision
3242
Toshiba
Emerson
1004, 1011, 1013, 1025, 1028, 1031, 1033, 1036, 1044,
1045, 1080, 1097, 1101, 1102, 1107, 1382, 1383
Tandy
1099
Denon
2110, 2133, 2040, 2216, 2247, 2253, 2317
Pioneer
6004, 6009, 6010, 6023, 6036, 6046, 6051
Citizen
3011, 3013, 3014
Tashiko
1058
Desay
2344
Polk Audio
6047
Colortyme
3011, 3029, 3030, 3038, 3096, 3098, 3099, 3102, 3103,
3141, 3142, 3149, 3165, 3166, 3167, 3168, 3180, 3182,
3185, 3210, 3219, 3220, 3223, 3227, 3241
Envision
1004
Tatung
1003
DiamondVision
2382
Proton
6035
Curtis Mathes
3000, 3005, 3014, 3016, 3212
Fisher
1043, 1045, 1047, 1103
Technics
1049
Disney
2321
Quasar
6001
CyberPower
3223
Fujitsu
1044, 1029
Techwood
1004, 1049
Durabrand
2326
RCA
6025, 6046
Daewoo
3011, 3013, 3021, 3076, 3120, 3150
Funai
1036, 1044, 1384
Teknika
1001, 1004, 1005, 1007, 1111, 1012, 1015, 1036, 1044,
1060, 1073, 1096, 1097
Eclipse
2335
Sharp
6029, 6030, 6031, 6032
DBX
Emerson
2002, 2059, 2073, 2321, 2327, 2392
Sherwood
6011
Dell
3223
ESA
2327, 2394
Shure
6048
Dimensia
3000
Fisher
2112, 2134, 2255
Sony
6020, 6042, 6044, 6049
Dynatech
3021
3005
3005, 3006
Futuretec
1036
Gateway
1038
Tera
1004, 1011
GE
1000, 1003, 1004, 1008, 1021, 1048, 1049, 1063, 1068,
1094, 1144, 1164, 1224, 1367, 1380, 1381, 1385, 1386
Thomas
1384
TMK
1004
Gibralter
1160
Funai
2002, 2321, 2327
Soundesign
6045
Electrohome
3023
Toshiba
Goldstar
1004, 1005, 1011, 1018, 1050, 1090, 1091, 1097, 1098,
1400, 1401
1006, 1045, 1058, 1073, 1175, 1079, 1093, 1116, 1154,
1158, 1159, 1252, 1267, 1281, 1282, 1283, 1284, 1286,
1293, 1294, 1313, 1315, 1319, 1338, 1364, 1377
Gateway
2346
Teac
6019
Emerson
3003, 3011, 3016, 3021, 3023, 3038, 3083, 3202
GE
2079, 2118, 2041, 2261, 2272, 2319, 2322
Technic
6001
Expressvu
3247
Grunpy
1036, 1044
Totevision
1097
Go Video
2046, 2127, 2129, 2124, 2230, 2239, 2249, 2346
Technics
6001, 6040
Fisher
3007, 3029, 3030
Hallmark
1004
Universal
1048, 1063
GPX
2114, 2390
Toshiba
6027
Fuji
3016, 3058
Harley Davidson
1384
Victor
1055
Harvard
1036
Vidtech
1004, 1005
Hisense
1112
Viking
1100
Hitachi
1004, 1011, 1012, 1051, 1052, 1084, 1085, 1086, 1087,
1102, 1225, 1384
Wards
1000, 1001, 1004, 1005, 1118, 1031, 1044, 1048, 1053,
1056, 1057, 1059, 1060, 1063, 1064
HP
1408
Westinghouse
1013
Initial
2322, 2381
Ilo
1457
Yamaha
1004, 1005, 1018
Insignia
2327, 2369, 2394
IMA
1036
Zenith
1001, 1089, 1118, 1125, 1161, 1287, 1357, 1382, 1383,
1384
Irradio
2149, 2150
JVC
2017, 2028, 2047, 2090, 2096, 2097, 2115, 2166, 2204,
2206, 2217, 2218, 2232, 2242, 2265, 2277, 2283, 2359,
2360, 2361, 2362, 2364, 2365, 2366, 2367
Apex
4049
Audiovox
4053
Bose
4000
2130, 2215
2142, 2148
4060
2395
Greenhill
2322
Victor
6024
Funai
3002, 3021
Grundig
2320
Wards
6045
Garrard
3021
Harman Kardon
2125
Yamaha
6007, 6037, 6038, 6043, 6052, 6053
Gateway
3223
Hitachi
2000, 2027, 2126, 2173, 2240
GE
3000, 3016, 3059, 3090, 3201, 3203, 3212
Ilo
2375
Go Video
3066, 3073, 3109, 3110, 3188, 3193, 3221
Home Theater in a Box (HTIB)
Audio
DVD
GOI
3247
Goldstar
3005, 3014
Gradiente
3021
2316
Harley Davidson
3021
2388
Harman Kardon
3005
Headquarter
3007
Hewlett Packard
3223
Hitachi
3052, 3055, 3059, 3117, 3169
HNS
3243
HP
3223
HTS
3247
Hughes
Infinity
1053
Janeil
1100
JBL
1053
HDTV
JC Penney
1000, 1004, 1005, 1007, 1012, 1021, 1048, 1049, 1058,
1063, 1068, 1072, 1073, 1075, 1097, 1098
Acer
1041, 1192
KLH
2322
Cambridge
Sound Works
JCB
1002
Akai
1427, 1432
Konka
2029, 2030, 2376
Classic
4055
2391
Jensen
1004, 1232, 1285, 1314, 1376
Apex
1088
Koss
2060, 2200
Coby
4052
2387
JVC
1011, 1012, 1026, 1049, 1052, 1054, 1055, 1080, 1092,
1117, 1131, 1235, 1288, 1299
Astar
1434
Lasonic
2081
Curtis
4056
2387
Audiovox
1455
Lenoxx
2326
Denon
4012
2216
Kenwood
Kawasho
1002, 1004
Axion
1459
LG
2297, 2303, 2339, 2352, 2363, 2368, 2371
Emerson
4057
2392
Kenwood
1004, 1018
Benq
1136
Liteon
2346, 2353
GPX
4055
2390
Kloss Novabeam
4059
Daewoo
2062
Emerson
2073
3083
Go Video
JCL
3016
2046, 2127, 2129, 2230,
2239, 2129
3066, 3110, 3109, 3188,
3193, 3221
Jensen
3055
Hitachi
2126, 2173
3117, 3169
JVC
3005, 3006, 3007, 3014, 3055, 3060, 3067, 3118, 3121,
3122, 3123, 3124, 3125, 3126, 3127, 3151, 3170, 3171,
3194, 3205, 3228, 3229, 3230, 3231, 3234, 3235, 3236,
3237, 3247, 3248, 3250
Insignia
2369
3239
JVC
Kenwood
3005, 3006, 3007, 3014, 3055, 3060
2047, 2097, 2166, 2232,
2166, 2359, 2360, 2361,
2362, 2364, 2365, 2366,
2367
3067, 3118, 3170, 3194,
3171, 3228, 3229, 3230,
3231, 3234, 3235, 3236,
3237
Lloyd’s
1384
Element
1431
Memorex
2003
Koss
4003, 4015
2060, 2200
Loewe
1053
Emerson
1468
Mintek
2004, 2322, 2381
LG
4041
2303
Logik
1001
Emprex
1438
Mitsubishi
2019, 2123, 2145, 2147
Magnavox
Luxman
1004
Epson
1422, 1451
NAD
2059, 2139
Onkyo
4004, 4016, 4017
2024, 2219, 2220
LXI
1000, 1004, 1045, 1053, 1058, 1068, 1075
Fujitsu
1029
Nakamichi
2116
Panasonic
Magnavox
1004, 1007, 1018, 1053, 1056, 1057, 1059, 1060, 1083,
1110, 1147, 1228, 1260, 1300, 1301, 1302, 1321, 1326,
1339, 1365, 1366, 1371, 1384, 1387
Gateway
1038, 1449
Nesa
2322
4005, 4018, 4030, 4038,
4050, 4051
2104, 2221, 2300, 2384,
2385, 2386
Hewlett Packard
1419, 1444, 1445, 1452
Nexxtech
2140, 2256, 2328
Philips
1030, 1132, 1133, 1134, 1191, 1208, 1209, 1210, 1211,
1212, 1226, 1322, 1324, 1328, 1344, 1447
Norcent
2005, 2117
4006, 4019, 4027, 4039,
4042
2036, 2222, 2282, 2304
Hitachi
Kodak
3016
Onkyo
2006, 2219, 2220, 2318
Pioneer
4007, 4020, 4021, 4029
2016, 2223, 2224
LG
3233, 3238
Majestic
1001
HP
1419, 1445, 1452
Oppo
2323
RCA
4008, 4026
2042, 2281, 2161
Linksys
3223
Marantz
1004, 1051, 1053
Ilo
1412, 1435, 1436
Oritron
2009
Samsung
4033, 4036, 4047
2294, 2299, 2295, 2314
Lloyd’s
3021
• Is the device’s power cord connected to the power
outlet?
Media Center
1408
InFocus
4058
2393
Magnavox
Megatron
1004, 1051
Initial
1457
3016, 3036, 3037, 3051, 3061, 3128, 3152, 3153, 3154,
3181, 3183, 3190, 3206, 3211
Memorex
1001, 1004, 1005, 1022, 1045
Insignia
1437
• Is the device switched on?
MGA
1004, 1005, 1018, 1021, 1047, 1061, 1062, 1380
JVC
1130, 1131, 1227
2031, 2066, 2075, 2076, 2104, 2105, 2106, 2111, 2167,
2179, 2188, 2198, 2207, 2211, 2212, 2221, 2228, 2248,
2151, 2153, 2154, 2155, 2258, 2268, 2300, 2318, 2384,
2385, 2386, 2398, 2399
Sanyo
Midland
1049, 1068, 1097, 1098, 1160
LG
1343, 1346, 1396
Check the IR Database Codes List
Minutz
1048
Magnavox
1329, 1358, 1372, 1414
Mitsubishi
1004, 1005, 1018, 1021, 1047, 1061, 1062, 1081, 1381
Maxent
1424
Montgomery Ward
1001
Mintek
1457
Motorola
1003, 1099
Mitsubishi
MTC
1004, 1005, 1073
NEC
Multitech
1036
NAD
• If yes and there is more than one code listed, try
using a different code to provide more functionality.
• If no, try the following:
– Use the Auto-Search function to find a usable code.
– If the Auto-Search function is unable to find a
usable code, you may need to use the original
remote provided with the device.
Code Tables
If the remote does not recognize your device, you can
find codes for your device by brand name. Code tables
in this section are organized by the devices assigned
to each mode (TV, DVD, and AUX).
NET-TV
1040
Presidian
2321
1004, 1058, 1075, 1085
Olevia
1406, 1418, 1421, 1462
Proscan
2010, 2118, 2144, 2205, 2319
NEC
1003, 1004, 1005
Panasonic
2009
1040
1140, 1169, 1170, 1194, 1233, 1234, 1331, 1336, 1410,
1417, 1442, 1466
Qwestar
Net-TV
RCA
Olevia
1420
Nikko
1004, 1015
2010, 2048, 2055, 2063, 2077, 2099, 2107, 2118, 2161,
2165, 2172, 2177, 2181, 2261, 2275, 2281, 2287, 2289,
2319, 2322, 2331
Norcent
1217, 1320
NTC
1015
Onwa
1036
Optimus
1085
Optonica
1064, 1099
Orion
1023, 1033, 110, 1382, 1383
Panasonic
1003, 1010, 1049, 1053, 1096, 1123, 1152, 1231, 1289,
1292, 1295, 1303, 1304, 1305, 1306, 1385
Penney
1380, 1385
1098
Admiral
1001, 1099
Advent
1005, 1053, 1110, 1113
Adventura
1100
Aiko
1015
Aiwa
1034
Akai
1002, 1427
Alleron
1044
Amtron
1036
Anam National
1003, 1036
AOC
1004, 1005
Apex
1111, 1119, 1163, 1256
Audiovox
1036
Bang & Olufsen
1453
Belcor
1004
Bell & Howell
1001, 1045
Benq
1042
Pioneer
1035, 1195, 1240, 1335, 1469, 1470
Sampo
2119
Polaroid
1262, 1391, 1392, 1393, 1396, 1431, 1440
Samsung
Proscan
1000
Protron
1430
2012, 2049, 2074, 2085, 2102, 2175, 2186, 2196, 2214,
2233, 2246, 2274, 2279, 2286, 2290, 2294, 2295, 2299,
2311, 2314, 2333, 2340, 2347, 2351
Proview
1407
RCA
1143, 1196, 1241, 1242
Sampo
1038, 1243
Samsung
1019, 1171, 1172, 1173, 1174, 1175, 1197, 1198, 1199,
1200, 1245, 1246, 1325, 1327, 1352, 1354, 1443
Sceptre
1467
1003, 1004, 1005, 1007, 1011, 1018, 1053, 1056, 1057,
1059
Scott
1428
Philips
1003, 1004, 1007, 1011, 1017, 1018, 1053, 1056, 1057,
1059, 1060, 1063, 1110, 1126, 1129, 1148, 1155, 1238,
1263, 1264, 1265, 1290, 1291, 1307, 1308, 1309, 1337,
1389
Sharp
1138, 1176, 1177, 1214, 1244, 1247, 1248, 1348, 1350,
1415, 1416
Sony
1037, 1128, 1137, 1178, 1215, 1216, 1218, 1219, 1220,
1221, 1250, 1251, 1316, 1318, 1330, 1347, 1413
5000, 5001, 5002, 5004, 5005, 5006, 5034, 5143
Akai
5083
Audiotronic
5145
Audiovox
5152
Bang & Olufsen
5151
2071
Bose
5007
Sanyo
2034, 2050, 2120, 2393
Capetronic
5144
Sensory Science
2345
Carver
5000, 5143 ,5145
Sharp
2013, 2015, 2044, 2082, 2086, 2170, 2174, 2292, 2321,
2396
Denon
Sherwood
2121, 2397
5008, 5035, 5036, 5037, 5038, 5039, 5040, 5041, 5042,
5043, 5044, 5045, 5046, 5047, 5048, 5049, 5050, 5051,
5052, 5053, 5054, 5114, 5124
Sony
2014, 2020, 2022, 2065, 2067, 2068, 2069, 2070, 2087,
2103, 2108, 2113, 2162, 2171, 2176, 2178, 2182, 2187,
2189, 2192, 2193, 2201, 2202, 2203, 2226, 2238, 2244,
2251, 2257, 2273, 2278, 2280, 2288, 2296, 2298, 2305,
2306, 2307, 2309, 2313, 2315, 2329, 2332, 2338, 2355,
2356, 2357, 2405, 2406, 2407
Sansui
Eclipse
5149
Gradiente
5153
Harman Kardon
5000, 5009, 5055, 5056, 5142, 5143
JBL
5009
JVC
5010, 5057, 5058, 5059, 5116
Kenwood
5011, 5012, 5013, 5060, 5061, 5062, 5063, 5064, 5065,
5066, 5067, 5068, 5123, 5127, 5128, 5132, 5148
2321
Polaroid
1285, 1458
Syntax-Brillian
1418
Techwood
2141
Portland
1004, 1005, 1015, 1097
Tatung
1426
TiVo
3074, 3244, 3245, 3246, 3249, 3250
Price Club
1073
Toshiba
1113
1127, 1179, 1203, 1204, 1222, 1223, 1332, 1340, 1341,
1345, 1353
Toshiba
Prima
Prism
1049
Trutech
1425
2135, 2312, 2348, 2349, 2350, 2358, 2401, 2402, 2403
5019, 5020, 5107, 5108, 5109, 5110, 5111, 5115, 5126
1004,1011
Toshiba
Panasonic
Proton
1038, 1149, 1180, 1181, 1182, 1183, 1184, 1185, 1186,
1187, 1188, 1189, 1190, 1205, 1206, 1441
5144
1000, 1008, 1068, 1108
Viewsonic
Optimus
Proscan
2023, 2025, 2037, 2038, 2040, 2041, 2054, 2080, 2084,
2088, 2093, 2094, 2168, 2180, 2183, 2184, 2185, 2197,
2210, 2227, 2231, 2235, 2259, 2271, 2276, 2284, 2301,
2318, 2334, 2341
Trutech
2345
5000, 5112, 5138, 5143, 5145, 5154
1160
1435
Philips
Pulsar
Vizio
1429, 1433, 1439
Urban Concepts
2318
Pioneer
Westinghouse
1454
Venturer
2011
5021, 5022, 5088, 5089, 5090, 5091, 5092, 5093, 5094,
5119, 5120, 5144, 5147
2372
5141
1020, 1139, 1207, 1253, 1255, 1333, 1342, 1349
Westinghouse
Polaroid
Zenith
Polk Audio
5143
Pulser
1004
Viore
Quasar
1003, 1039, 1049, 1096, 1165, 1166, 1385
Radio Shack/
Realistic
1000, 1004, 1011, 1036, 1045, 1064, 1097, 1098, 1384
RCA
1000, 1003, 1004, 1005, 1008, 1018, 1049, 1065, 1066,
1067, 1068, 1069, 1070, 1071, 1082, 1102, 1104, 1106,
1108, 1115, 1151, 1162, 1167, 1168, 1268, 1269, 1270,
1271, 1310, 1355, 1359, 1361, 1370, 1373, 1379, 1380,
1381, 1385, 1386
DVD
DVD Mode Group
Candle
1004, 1007, 1100
Celebrity
1002
Sansui
1023, 1107, 1122, 1273, 1382, 1383, 1384
AMW
Citizen
1004, 1007, 1015, 1036, 1073, 1097, 1100
Sanyo
1045, 1062, 1095, 1103, 1380
Scotch
Xbox
2319
Yamaha
2106, 2146, 2163, 2320, 2389
Zenith
2039, 2052, 2128, 2199, 2234, 2236, 2252, 2308, 2318
AUX Mode Group
2378
2026, 2131
5000, 5143
Magnavox
5000, 5143, 5144, 5145
Marantz
5000, 5069, 5143, 5145
Mitsubishi
5070, 5071, 5072
Onkyo
5018, 5073, 5074, 5075, 5076, 5077, 5078, 5079, 5080,
5081, 5082, 5084, 5085, 5086, 5087, 5130, 5131, 5140
RCA
5024, 5025, 5026, 5137, 5144
Rotel
5150
Samsung
6055
2342
Aiwa
6003, 6020
Apex
2001, 2056, 2057, 2061, 2095, 2098, 2229, 2250, 2316,
2322, 2330
Carver
6002
Citizen
6026
5139
Sansui
5000, 5143
Sherwood
5027
Sony
5017, 5023, 5028, 5029, 5030, 5031, 5032, 5033, 5095,
5096, 5097, 5113, 5117, 5121, 5125, 5129, 5133, 5134,
5136, 5146
Amplifier
Adcom
1004
Linn
Technics
5016, 5019, 5020, 5098, 5099, 5100, 5101, 5115, 5122,
5126
Thorens
5145
Wards
5000, 5021, 5143
Yamaha
5003, 5014, 5015, 5021, 5102, 5103, 5104, 5105, 5106,
5118, 5135
Scott
1004, 1011, 1033, 1036, 1044
Apex Digital
2261, 2262, 2263, 2266, 2269, 2291
Curtis Mathes
6046
Sears
1000, 1004, 1012, 1018, 1044, 1045, 1047, 1055, 1058,
1068, 1075, 1076, 1103, 1105, 1384
Arrgo
2325
Denon
6014, 6039, 6057
Astar
2354
Fisher
6002
1004, 1009, 1011, 1025, 1064, 1077, 1078, 1097, 1099,
1153, 1157, 1274, 1298, 1311, 1312, 1362, 1375, 1378
Audiovox
2132, 2373, 2388
GE
6028, 6045
VCR
Axion
2379
Goldstar
6016, 6021
ABS
Bang & Olufsen
2324, 2370
Harman Kardon
6013, 6047
Admira
3001
Blaupunkt
2136, 2322
Hitachi
6034
Adventura
3021
Bose
2122, 2130, 2215
JBL
6050
Aiwa
3021
Boss
2336
JVC
6018, 6024, 6041
Akai
3003, 3055, 3058
Broksonic
2053, 2072, 2284
Kenwood
6015, 6022
American High
3016
Cambridge
SoundWorks
2395
Left Coast
6047
Apex
3189
6035
Audio Dynamics
3005, 3006
Cinevision
2152, 2195
Marantz
6000, 6047, 6058
Bang & Olufsen
3222
Clarion
2100
Nakamichi
6012
Bell & Howell
3007
Classic
2101, 2391
NEC
6033, 6048
Broksonic
3081, 3082, 3202, 3213
Coby
2380, 2387
Onkyo
6005, 6006, 6017, 6054, 6056
Candle
3011, 3013, 3014
Curtis
2387
Optimus
6008, 6046
Sharp
1036, 1053
Shogun
1004
CTX
1257
Signature
1001
Curtis Mathes
1000, 1004, 1014, 1045, 1073, 1097, 1385
Simpson
1007
CXC
1036
Sony
1002, 1109, 1137, 1201, 1202, 1249, 1272, 1275, 1276,
1277, 1278, 1317, 1356, 1374, 1384, 1388
Cytron
1456
Daewoo
1004, 1005, 1013, 1015, 1016, 1097, 1106 1258 ,1362,
1368, 1369
Soundesign
1004, 1007, 1036, 1044
Squareview
1105
Daytron
1004, 1097
SSS
1036
DiamondVision
1461
Starlite
1036
Dimensia
1000
Supre-Macy
1100
Supreme
1002
1259
Aiwa
2002, 2064, 2078, 2092, 2194, 2213, 2321, 2327, 2408
2342
Durabrand
5144
2343
Amphion
MediaWorks
1160
ADC
Symphonic
Akai
Dumont
Receiver/Tuner
Sylvania
Aiwa
Crown
2011
2389
4037
Sungale
1004, 1097, 1098, 1120
1000, 1053
4011
1446
1004, 1005, 1011, 1014, 1018, 1019, 1072, 1073, 1074,
1097, 1098, 1156, 1161, 1297, 1323, 1360, 1363, 1364
1036
3223
2227
1418
1160
Crosley
Media Center PC
4025, 4040
1046, 1465
Samsung
Craig
3016
Syntax
Sampo
1004
Matsushita
Sylvania
Runco
1004
3005, 3006, 3007, 3014, 3016, 3036
SVA
1036
1011, 1012, 1036
3201
Marantz
1097
1114, 1121, 1382, 1383
Contec/Cony
Magnin
2113, 2108, 2225, 2226,
2278, 2288, 2296, 2305,
2306, 2307, 2315
1004, 1085, 1102
1004
Concerto
2397
4009, 4010, 4022, 4023,
4024, 4031, 4032, 4034,
4043, 4044, 4045, 4046,
4048
1260, 1264, 1265, 1266
Brokwood
Colortyme
2396
4062
Sony
Pioneer
Broksonic
Bradford
4061
Sherwood
Pilot
Philips Magnavox
Abex
1126, 1129, 1236, 1237, 1239, 1261, 1334, 1351, 1390,
1411
Philco
TV Mode Group
TV
Philips
Sharp
4054
Magnavox
3223
If you have a combination device, you may need to
reassign the AUX key to operate one of the devices,
for example, the VCR. The following tables provide
some examples of combination devices. If your
combination device is not listed, simply look for the
codes for each separate device.
3005, 3006, 3007, 3016, 3030, 3036, 3052
2035, 2217, 2218, 2283
Zenith
Combination Device Codes
3016
2043
4002, 4013, 4014, 4028
Yamaha
3223
3239
4001
JVC
Venturer
ZT Group
JC Penney
JBL
2320
3048, 3051, 3058, 3064, 3072, 3097, 3119, 3143, 3144,
3186, 3196, 3198, 3202, 3204, 3211, 3213
Instant Replay
Insignia
2143, 2320
2007, 2377, 2409
Zenith
Insignia
2002, 2018, 2033, 2089, 2237, 2241, 2245, 2259, 2270,
2293, 2318, 2320, 2321, 2327
Polk Audio
3005, 3006, 3007, 3014, 3055
3082
Marantz
Polaroid
3016, 3021
Yamaha
3242
Magnavox
1193, 1423
3002
XR-1000
2072
1460
1032, 1213, 1229, 1230, 1448
Westinghouse
2230
1380
Is the device brand name for the device listed in the
code list?
3001, 3011, 3016, 3021, 3023, 3047, 3052
CineVision
1141, 1142, 1146, 1394, 1395, 1409
Toshiba
Wards
Broksonic
1135
2008, 2021, 2160, 2164, 2191, 2223, 2224, 2267, 2310,
2337, 2400
3223
3223
Dell
Pioneer
3223
Voodoo
3246
Daewoo
2018, 2032, 2033, 2045, 2051, 2091, 2109, 2156, 2157,
2158, 2159, 2169, 2208, 2209, 2222, 2243, 2259, 2260,
2264, 2282, 2285, 2302, 2304, 2318, 2320, 2321, 2404
Viewsonic
Hush
Coby
Philips
3005, 3006, 3011
Humax
1036, 1097, 1101
Panasonic
3006
Video Concepts
VCR
1005, 1396, 1397, 1398, 1399, 1402, 1403, 1404, 1405
1450
Victor
3189
Magnin
Check the Device
3005, 3006, 3011
Apex
1036, 1056, 1057, 1100
2293
3223
Vector Research
3246, 3250
LG
4035
Touch
DVD/VCR Combo
DVD
KTV
2394
3016, 3021, 3050
MEI
3016
Memorex
3001, 3004, 3007, 3016, 3021, 3051
MGA
3023, 3038, 3201
Mind
3223
Minolta
3052
Mitsubishi
3023, 3038, 3039, 3060, 3108, 3203
2229
2363, 2368
3233, 3238
Magnavox
2237
3190
Panasonic
2066, 2167, 2228
3078, 3172, 3191
Philips
2051, 2169
3071, 3173
Polaroid
2007
3111
RCA
2048, 2165, 2172
3068, 3174, 3175
Samsung
2049, 2074, 2085, 2233,
2290, 2311
3069, 3084, 3101, 3184,
3214, 3218, 3232
Sanyo
2050
3070
Sharp
2170, 2174
3176, 3177
Sony
2065, 2067, 2171, 2238,
2244, 2067, 2355, 2356,
2357
3104, 3085, 3179, 3187,
3192, 3178, 3224, 3225,
3226, 3240
Toshiba
2080, 2084, 2168, 2235,
2312, 2358
3103, 3102, 3180, 3185,
3219, 3227, 3241
Zenith,
2052, 2128, 2234, 2236
3072, 3119, 3186, 3186
Montgomery Ward
3001
Motorola
3001, 3016
Multitech
3021
NEC
3005, 3006, 3007, 3014, 3055, 3060
Niveus Media
3223
Akai
Northgate
3223
Apex
1163
2095
Olympus
3016
Axion
1459
2379
Optimus
3001
Bang & Olufsen
1453
2370
2053
1427
DVD
2378
3047
Broksonic
1114
Orion
3004, 3202, 3213
Coby
1460
Panasonic
3016, 3053, 3062, 3063, 3077, 3078, 3079, 3086, 3087,
3107, 3129, 3130, 3131, 3132, 3133, 3134, 3145, 3146,
3155, 3156, 3157, 3158, 3159, 3172, 3191, 3197, 3207,
3212, 3253
Cytron
1456
2374
DiamondVision
1461
2382
Hitachi
1226
2240
Optonica
Penney
3201, 3212
Pentax
3052, 3059
Pentex Research
3014
Philco
3016, 3036, 3037
Philips
3016, 3036, 3047, 3061, 3071, 3135, 3160, 3161, 3173,
3208, 3216, 3243, 3244, 3246, 3250, 3251
Philips Magnavox
3135
Pioneer
3006, 3060
Polaroid
3111
Portland
3013
Proscan
3000
Pulsar
3051
Quarter
3007
Quartz
3007
Quasar
3016, 3062, 3091, 3092, 3212
Radio Shack/
Realistic
3001, 3007, 3011, 3016, 3021, 3023, 3029, 3047
RCA
3000, 3003, 3016, 3040, 3041, 3042, 3052, 3059, 3062,
3068, 3075, 3093, 3094, 3106, 3136, 3162, 3174, 3175,
3199, 3201, 3203, 3206, 3212, 3243, 3249, 3250
ReplayTV
3252
Ricavision
3223
Ricoh
3064
Runco
3051
Samsung
3011, 3069, 3084, 3089, 3101, 3148, 3184, 3214, 3215,
3218, 3232, 3243
Sanky
3001, 3051
Sansui
3004, 3006, 3055, 3060, 3202, 3211, 3213
Sanyo
3007, 3070, 3201
Scott
3011, 3038
Sears
3007, 3016, 3029, 3030, 3052, 3211
Sharp
3001, 3013, 3023, 3047, 3080, 3100, 3137, 3163, 3164,
3176, 3177, 3200
2380
Ilo
1457
2375
Initial
1457
2381
JVC
1288
2206
LG
1255
2371
Mintek
1457
2381
Panasonic
1289
2207
Philips
1290, 1291, 1337
2208, 2209, 2243
Polaroid
1458, 1440
2377, 2409
RCA
1115, 1162, 1379
2063, 2099, 2289
Sansui
1122
2071
Sylvania
1150, 1464
2092, 2408
Toshiba
1116, 1293, 1294, 1345
2054, 2210, 2231
Westinghouse
1454
2372
TV/Receiver Combo
Brand
TV
Receiver
Philips
1390
5138
Polaroid
1393
5141
TV/VCR Combo
Brand
TV
VCR
Broksonic
1121, 1382, 1383
3081, 3213, 3202
Daewoo
1298
3150
Emerson
1382, 1383
3213, 3202
GE
1164, 1380, 1381
3090, 3201, 3203
JVC
1299
3151
Magnavox
1300, 1301, 1302, 1321
3152, 3153, 3154, 3181
Magnin
1380
3201
MGA
1380
3201
Mitsubishi
1381
3203
Orion
1382, 1383
3213, 3202
Panasonic
1305, 1306
3158, 3159
Penney
1380
3201
Philips
1307, 1308
3160, 3152
Shintom
3048, 3058
Signature
3001
Singer
3016, 3064
Sony
3048, 3049, 3058, 3085, 3104, 3138, 3139, 3140, 3178,
3179, 3187, 3192, 3195, 3209, 3211, 3217, 3223, 3224,
3225, 3226, 3240, 3245
Stack 9
3223
STS
3016, 3052
Sylvania
3016, 3021, 3036, 3037, 3038, 3061, 3088, 3095, 3105,
3147
Samsung
1161
3089
Sansui
1382, 1383
3213, 3202
Symphonic
3002, 3021
Sanyo
1380
3201
Quasar
1165, 1166
3091, 3092
RCA
1167, 1168, 1310, 1380,
1381
3093, 3094, 3162, 3201
3203
3223
Sharp
1311, 1312
Tandy
3007
Sylvania
1145
3095
Tatung
3055
Toshiba
Teac
3021, 3042, 3055
1006, 1267, 1313, 1315,
1319
3096, 3168, 3165, 3166,
3167, 3182
Technics
3016, 3053
Zenith
1118, 1382, 1383
3097, 3213, 3202
Systemax
Tuner
Audiovox
5152
1455
2373
TV/DVD/VCR Combo
TV
DVD
VCR
Magnavox
1339
2241
3183
Panasonic
1123, 1152
2075, 2076
3087, 3086
RCA
1151
2077
Samsung
1297
2214
3148
Sharp
1153, 1378
2086, 2292
3100, 3200
3106
Sylvania
1027, 1124,
1296
2064, 2078,
2213
3105, 3088,
3147
Toshiba
1154, 1158,
1338
2093, 2094
3099, 3098,
3149
TV/VCR/Tuner Combo
TV
VCR
Tuner
Panasonic
1303, 1304
3155, 3156,
3157
5109, 5110,
5111
Philips
1309
3161
5112
TV/DVD/VCR/Tuner Combo
TV
DVD
VCR
Tuner
Panasonic
5107, 5108
1292,1295
2211, 2212
3145, 3146
Device Program Codes
If you program codes to control devices, record your
codes here for easy reference:
3076
LG
TV/DVD Combo
TV
TV/DVD/Tuner Combo
TV
DVD
3163, 3164
Mode
Key
Device
Type
Brand
Code
Example:
DVD
DVD
Sony
2066
TV
DVD
AUX
FCC Compliance
United States FCC Compliance
This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against such interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy. If not installed
and used in accordance with the instructions, it may cause harmful interference to
radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
OFF and ON, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna, if applicable.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the cable company or an experienced radio/television technician for
help.
Any changes or modifications not expressly approved by Scientific-Atlanta, Inc.,
could void the user’s authority to operate the equipment.
The information shown in the FCC Declaration of Conformity paragraph below is
a requirement of the FCC and is intended to supply you with information regarding
the FCC approval of this device. The phone numbers listed are for FCC-related
questions only and not intended for questions regarding the connection or
operation for this device. Please contact your cable service provider for any
questions you may have regarding the operation or installation of this device.
Declaration of Conformity
This device complies with Part 15 of FCC Rules. Operation is subject to the
following two conditions: 1) the device may not cause harmful interference, and 2)
the device must accept any interference received, including interference that may
cause undesired operation.
AllTouch IR Universal Remote Control
AT6400
Scientific-Atlanta, Inc.
5030 Sugarloaf Parkway
Lawrenceville, Georgia 30044 USA
Telephone: 770-236-1077
Canada EMI Regulation
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la class B est conforme à la norme NMB-003 du
Canada.
20060628 FCC Standard
Scientific Atlanta, A Cisco Company
5030 Sugarloaf Parkway
Box 465447
Lawrenceville, GA 30042
678.277.1000
www.scientificatlanta.com
Cisco, Cisco Systems, the Cisco logo, the Cisco Systems logo, Scientific
Atlanta, and AllTouch are registered trademarks or trademarks of Cisco Systems,
Inc. and/or its affiliates in the U.S. and certain other countries.
All other trademarks shown are trademarks of their respective owners.
Product and service availability subject to change without notice.
© 2007-2008 by Cisco Systems, Inc. All rights reserved.
July 2008
Remote Control Part Number 4021830 (Linux version)
User Guide Part Number 4019792 Rev B