Bosch NFN 67.. Specifications

Innovative
PLC-Components
PLC-Router [2]
S7-Firewall [2]
TELE-Router[4]
PLC-Remote maintenance [8]
TELE-PROFessional-II (TP-II) [9]
TELE-PROFessional (TP) [12]
TELE-BOOK (TB) [15]
TELE-Manager [17]
Win-TELE-PROF [15]
TELEService [18]
MPI / PPI - Profibusmodem [20]
EVENT-MODEM [21]
S7 - interface cable [24]
S7-WLAN-SET [26]
WLAN-Klemme [27]
S7-WLAN-Bridge [28]
S7-LAN [29]
MPI/PPI [31]
MPI-II [32]
S7-USB [34]
MPI-USB [35]
MPI-LAN [36]
S5 - interface cable [38]
S5-LAN++ [38]
PG-USB [41]
S5toMPI [42]
PG-COM [43]
PG-UNI [44]
PG-UNI II [45]
PG-ISO-SET [47]
Other interface cables [48]
Memory modules / Prommer [49]
Memory-modules [49]
MULTI-PROMMER [50]
MINI-PROMMER [51]
FLASH-PROMMER [52]
EPROM-ERASER LG07 [52]
EPROM-ERASER UVL3 [53]
PD-interface-multiplexer [54]
PG-MUX II [54]
MINI-MUX [55]
T-Connector to PPI/MPI-Bus [56]
Other PLC accessories [57]
Profinet-Connector [57]
Profibus-Plug-DiagConn PB [57]
PD- / PLC-Switcher [58]
iBx-Busklemme [59]
UNI-COM [60]
L1-Controller [61]
PLC-Clock [62]
PG-Print, PG-Print-III [63]
PG-FOX [64]
S5-DIAG [65]
KOR-MUX / TELE-Switch [66]
16-times PC-Switch [67]
Gasanalysis [68]
OSM-HMG [68]
Oxygen - Service - Controller II [69]
PLC-software-tools [70]
PLC - Data safety [70]
CIM - 2001 [70]
with
STEP5 / STEP7 - PD-software [71]
practical tips
PLC - communication driver [80]
PG-2000 STEP 5 [72]
PG-2000 STEP 7 [74]
PG-2000 Complete package [77]
SIMATIC S7-communication driver [80]
SIMATIC S5-communication driver [81]
AEG-communication driver [82]
BOSCH-communication driver [82]
MITSUBISHI/MELSEC-communication driver [82]
Visualisation / OPC-Server [83]
OPC-Server [83]
Victory Boxed Release [84]
Victory Release 5 [85]
Accessories [86]
Simple and quick router-solutions for automation technique
Securing the production-/automation-network from the company-network
Protection from S7-PLC-Virus Stuxnet
Step7 protocol filtering
User access management
Safe teleservice connection
Isolated area of maintenance
Alarm and event log
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
6,5 Watt
Display:
Web-Browser
4 Status-LEDs
Handling/Configuration:
Web-Browser
Taster for factory settings
Interfaces:
1 x 10/100BaseTX RJ45-Ethernetjack for WAN-Port
4 x 10/100BaseTX RJ45-Ethernetjack switched
all Ethernetports are Auto MDI-X (auto negotiation)
Operating temperature:
5 - 55°C
Case:
powder coated metal case
Dimensions:
154 x 92 x 28 mm
Protection againt virus attacks
Protection for data-dump and modification
PLC - Router
You want to protect your system against virus? No problem, with the You want to protect your system against access and changes? No
S7-Firewall you will be able to protect the plant for the virus "Stuxnet" . problem, with the S7-Firewall you will be able to protect the plant for
You provide the destruction of your plant- or processing-data.
strange access and provide the dump or modification of your plant- or
processing-data.
2
Permit requests depending on the ip- and mac-address
Protection of data areas in the PLC
You have in your plant equipment from different manufacturers and no one
should get access to the controls of the other? No problem, with the
S7-firewall you will be able to filter who communicates at all with the
machine-network and which user can communicate with which end user.
This is done by ip-address and as well by MAC-address.
You have in your plant machinery with complex program-structures and
want prevent that the user changes unclear data? No problem, with the
S7-firewall you can assign each user specific data areas or general
protect specific data areas in the PLC.
Log messages via e-mail
You want to be informed about access violations, division overruns while
communication with your PLCs? No problem, with the S7-firewall you will
be informed by e-mail about any of these attacks/injuries to determine the
causer.
article:
Art. ID.
name
price
9373-S7-Firewall S7-Firewall
OEM - Version (all accessories optional)
options:
Art. ID.
name
price
9373-Learn Learnmode
Monitors the current traffic in the learn-mode, creating the appropriate rules for equipment requests and setpoints
name
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9636-CROSS
Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning
9636-TCPIP.02M Patch-cable 0.25m, Cat5e, shielded
RJ45 plug <=> RJ45 plug, 1:1
9636-TCPIP
Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1
9372-24
Power connector 3pins big
connector plug lockable by jack with screws
price
PLC - Router
accessories:
Art. ID.
3
The simple and quick router solution for automation
General
4 port ethernet switch
1 additional WAN port for routing
IPV6-Ready
Super simple VPN-Gateway
Network routing user-oriented & password-protected
Dial in router
Analog (worldwide usage) or ISDN or PPPoE
S7-PPI/MPI/DP via S7-LAN
S7-1200 or S7300/400 with Profinet-Interface
S5 via S5-LAN++
Features:
PLC - Router
4
Integrated webserver for configuration of the users
PPP
PPPoE (operation with DSL/cable-modem)
IPV6-Ready
NAT
VPN
DynDNS-support
DHCP Client/Server
NTP-Client
Portforwarding
Integrated Firewall
Automatic CALL-Back
Router-mode
Modem <–> LAN
Modem <–> WAN
WAN <-> LAN
User-specific routing (optional)
For each user definable, which devices (ip-addresses) and to which port may be accessed
Multiple IP addresses
Each WAN/LAN-port can get up to 4 different ip-addresses to make immediately with various IP networks and network segments and
addresses (eg 192.168.0.x and 172.16.x.x and 10.x.x.x) remote maintenance.
Routing of individual ip-addresses between WAN/LAN-ports configurable
Integrated phone-/user-directory:
In the device telephone- and VPN-users and stored and by clicking on a button, a modem-/VPN-connection is built up to the desir ed
target.
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
6,5 Watt
Display:
Web-Browser
4 Status-LEDs
Handling/Configuration:
Web-Browser
Taster for factory settings
Modem-speed:
(depending on the devicevariants)
Analogue:
56 KBit/s
ISDN:
64 KBit/s
Interfaces:
Ethernet:
1 x 10/100BaseTX RJ45-Ethernetjack for WAN-Port
4 x 10/100BaseTX RJ45-Ethernetjack switched
all Ethernetports are Auto MDI-X (auto negotiation)
Modem:
1 x RJ45-jack for ISDN modem or RS232 (alternativly)
1 x RJ12-jack for analog modem (alternativly)
Operating temperature:
5 - 55°C
Case:
powder coated metal case
Dimensions:
154 x 92 x 28 mm
Universal coupling
Integrated WebServer
You want to use a device that is small and handy and reasonable
configurable? No problem, with the TELE-Router you can solve all these
requirements. The device is by an integrated web-server configurable, the
connectors self-explanatory.
You need a family of devices were you can solve all your requirements?
No problem, with the TELE-Router you will be in the situation, to build up a
coupling via analog, ISDN or PPPoE (DSL cable modem). The devices
are each compatible with one another, so that no other additional
hardware is required.
Secure access through VPN
You are looking for a device that also can be used with DSL? No
problem, just connect your TELE-Router PPPoE with a DSL/cablemodem, indicate the access parameters and you will be connected with
the device with internet.
You are looking for a device with were a remote maintenance can be
realized via the Internet without compromising security? No problem, with
the TELE-Router you can instantly build up after parameterization a VPN
connection and after registration you can communicate with your PLCs.
An associated VPN-client for the PC can be downloaded from the
download-side.
Integrated Firewall-protection
Saving of phone cost through call-back
You are looking for a device with were a remote maintenance can be
realized via the Internet without compromising security? No problem, the
TELE-Router offers you exactly this feature. With the built-in firewall you
can adapt the device to your personal requirements.
You need a communication over the phone with your plants but would not
carry the phone costs? No problem, with the TELE-Router you will be able
to maintain the capacity of recall. That is, first dial to the device and tell
him that you want a call-back. If the credentials are OK and the recall is
allowed, the TELE-router cuts the connection and then calls back the
transferred number. So, your customer shall bear the cost of the
connection.
Universal router
Universal network-administration
You need a flexible device to realise the remote maintenance of oyur
plants? No problem, with the TELE-Router you have a device that can be
configured easily and quickly to the requirements you need. Whether you
need a coupling between the modem and LAN, WAN or modem and LAN
and WAN.
PLC - Router
Operation on DSL-cable-modem
You have to remote maintenance multiple networks simultaneously and
your existing switch/router does not have so many connectors? No
problem, with the TELE-Router you will be able to assign for each
LAN/WAN-port up to 4 ip-addresses, so that you will be able to
communicate with the various segments and networks.
5
Integrated phone-book
You have to maintain several plants and don´t want to hold a seperate list
of phone numbers? No problem, the TELE-Router contains a
phone-book, so you can hold at any time the whole content data in the
router and built-up by clicking in the web-browser a connection to the
opposite side.
article:
Art. ID.
name
price
9373-ANALOG TELE-Router analogue (worldwide usage)
OEM - Version (all accessories optional)
9373-ISDN
TELE-Router ISDN
OEM - Version (all accessories optional)
9373-PPPoE
TELE-Router PPPoE (operation on DSL-/cable-modem
OEM - Version (all accessories optional)
options:
Art. ID.
name
PLC - Router
9373-Autosave
Autosave/Restore
Automatic saving of user-definable data and program areas
9373-Diagnose
Diagnosis-module
- Display in the network structure available of all simatic S7-systems
- Displays properties/diagnostic-buffer of each simatic S7-PLCs
9373-EMAIL
E-Mail/Fax/SMS–messaging
Configurable web-based reporting system for sending messages and reports by E-Mail/Fax/SMS
9373-HMI-Modul
HMI-module
Configurable web-pages for visualization/controls of S7-PLCs without PLC-programming
9373-ProfiNet-Router ProfiNet-Router
- Coupling of selected ProfiNet-stations via modem/DSL/Internet with VPN
- Remote maintenance Simatic S7-ProfiNet over Internet with VPN/modem
- ProfiNet telegrams Routing
9373-S5-S7-COM
S5-S7-COM
- S5/H1-CP's will be RFC1006 compatible, without changes in the S5
- accessing a S5 via H1 like a S7
=> WinCC with his TP's and MP's immediately accessible via TCP/IP on a S5
- S5/H1-CP in a TCP/IP-network
9373-Switch-Manager Switch-Manager
For each individual user definable, which ports are connected
9373-Userroute
6
Userroute
User-specific routing:
For each user definable, which devices (ip-addresses) and to which port may be accessed
price
accessories:
Art. ID.
name
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9636-CROSS
Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning
price
9636-TCPIP
Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1
9372-24
Power connector 3pins big
connector plug lockable by jack with screws
9370-TAE
TAE junction box
analogue telephone box (NFN) for on-wall mounting
9370-SET
Phone-connector-set 16parts
worldwide use
9370-8-D/USA
Phone-cable analogue Germany+USA
RJ12 plug <=> RJ12 plug with TAE-adapter for Germany
9370-8-ISDN
Phone-cable ISDN
RJ45 plug <=> RJ45 plug, assigned 1to1
9370-8-BE
Special phone-cable for Belgium
RJ12 plug <=> telephone plug of Belgium
9370-8-DK
Special phone-cable for Denmark
RJ12 plug <=> telephone plug of Denmark
9370-8-FR
Special phone-cable for France
RJ12 plug <=> telephone plug of France
9370-8-GB
Special phone-cable for Great Britain
RJ12 plug <=> telephone plug of Great Britain
9370-8-NL
Special phone-cable for Netherlands
RJ12 plug <=> telephone plug of the Netherlands
9370-8-CH
Special phone-cable for Switzerland
RJ12 plug <=> telephone plug of Switzerland
9370-8-AT
Special phone-cable for Austria
RJ12 plug <=> telephone plug of Austria
PLC - Router
9636-TCPIP.02M Patch-cable 0.25m, Cat5e, shielded
RJ45 plug <=> RJ45 plug, 1:1
7
Facilities management world wide by telephone
Which system programmer does not know this: On Friday, just before weekend, a call from a customer comes in:
„ The production stands still, nothing works. You have to solve this problem immediately.
Otherwise...e.g.“. No other choice than going as fast as possible to the customer to set the important system
into operation.
What could be the problem? Which input, that is necessary for the release of the program, is not set? Is the
problem caused by the end switch?
During the long ride to the customer, many of such questions come to mind. Then sometimes it happens, that you discover a still missing link in
your PLC program. Wouldn’t it be nice, to get rid of the problem simply with a phone call.
Why not? Our remote maintenance devices are the answer to the question.
application table:
TELE LINK NETWORK
secured modem-protocol
Tele-Prof-II
Tele-Prof
Tele-Book
x
x
x
MPI-Modem
TELEService
analogue/ISDN
analogue
opt. via PCMCIA
Siemens TS -Software
Siemens TS -Software
analogue/GSM
x
x
x
analogue/ISDN/GSM
x
x
2x
2x
1x
2x
2x
1x
9600-12MBd
1x
9600-12MBd
1x
x
x
x
x
instead 10 LEDs
x
x
x
x
x
x (optional)
x (optional)
x (optional)
x (optional)
x (optional)
x (optional)
x (optional)
x (optional)
x (optional)
x
x (optional)
x (optional)
x (optional)
x (optional)
x (optional)
x (optional)
x (optional)
x (optional)
x (optional)
x
x
x
x
x
additional software needed
modem
modem for world wide use
interfaeces
PLC - Remote maintenance
MPI/Profibus
RS232
TTY
PCMCIA
Ethernet
USB
LCD
9600-12MBd
2x
2x
2x
10/100BaseTx
2x
1x
supported PLC-protocols *
S7
S5
Pilz PSS
Allen-Bradley
AEG
Bosch
Telemecanique
GE-Fanuc
Klöckner-Moeller
Mitsubishi
SMS-sending/Pager(S5/S7)
x (no Pager)
SMS-receive with GSM
x
DTMF with analogue
x
e-mail-dispatch
x
FAX-dispatch(S5/S7)
x
x (optional)
x (optional)
PLC-data coupling(S5/S7)
x
x (optional)
x (optional)
ASCII-transfer from S5/S7
x
x (optional)
x (optional)
internet-coupling
x
24V/DC
24V/DC
24V/DC
24V/DC
24V/DC
Hoch: 67 x 280 x 170
FLAT: 300 x 175 x 70
300 x 175 x 66
235 x 162 x 37
90 x 162 x 54
40 x 125 x 115
power supply
dimensions w x h x d (in mm)
x
* other PLC types on request
Secure and comfortable remote maintenance with all devices of the Tele-Link-Network family
interconnecting of all devices of the Tele-Link-Network-family possible
multiple secure intelligent modem transmission protocol
electronics to the telephone network and the external power supply as well as to the control system
respectively to the programming unit galvanically isolated
robust steel plate case with mounting flange
8
Programming of S5- and S7-PLC’s via telephone from afar
secured modem-protocol, no additional software needed
UMTS- / VPN- / internet-service
also for PLC’s with ProfiNet
SMS and fax sending directly from S7-300/400 (no PLC-programming necessary)
analogue modem couples automatically via ISDN
with integrated CP-343-1 / 443-1 functionality
Ethernet also for router function
PCMCIA-slots (only for version -H) for extensions (memory cards / specific modem cards (GSM) / WLAN)
compatible to the forerunner model (TELE-Prof / TELE-Book / TELE-Link)
also as TCP/IP-router
S7-variables display via Web-Browser
S7-remote maintenance with MPI-Interface
S5-remote maintenance (access to every S5 direct / via H1, L1, L2 and KOR/MUX)
integrated telephone directory
call-back of partner possible
software-update via PC (LAN) respectively from device to device possible
Supply voltage:
24V/DC +/- 20%
Power consumption:
15 watt
Display:
expressive LCD display
5 status LEDs
Handling/Configuration:
integrated keypad
WEB-Browser
Interfaces:
to the PLC:
PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
TTY/20mA current loop (AG-TELE aktiv, PLC passiv)
RS232: 9,6 KBd - 115,2 KBd / fully assigned
to the PD/PC:
10/100BaseTX RJ45-ethernet jack
TTY/20mA current loop (100 % mechanically and electr. compatible)
RS232: 9,6 KBd - 115,2 KBd / with a 1on1-cable to the PC
others:
2xUSB, 2xPCMCIA (only for version -H)
Integrated modem:
33K6 HIGH-SPEED, V.42/BIS MNP5 analogue modem
ISDN (Euro ISDN + 1TR6)
Operating temperature:
5 - 55°C
Case:
powder coated metal case with mounting flange and DIN-rail mounting
Dimensions:
Flat 300 x 175 x 70 mm
Hoch 67 x 280 x 170 mm
Remote maintenance / telecontrol of PLC
Analogue and ISDN - how do they come together?
PLC - Remote maintenance
Technical Specifications:
You have on the plant side only ISDN for telephone, but in your office there
is only an analogue system? No problem, you have to install on the clients
side the TP-II and activate there the analogue-emulation in the device. No,
the modem signals will be send digitalized over ISDN and you can
connect to it. So, you will be able to communicate though the telephone
systems are different and your client isn´t forced to install an analogue
Access to the connected PLC takes place by coupling via Analogue-, connection.
ISDN-, mixed Analogue-ISDN-, GSM-, UMTS-line and also via Internet
with and without VPN-security.
User dependant network access
Router Mode (access to the network without router)
−
The Tele-Prof-II can also be used as a router for access from a PC via
dial-up connection, so that a communication with the behind covered
network results. Furthermore a network connection can be made with the
TP-II <=> TP-II-line, but in doing so the IP-address-root must differ.
You have PLC/LAN-participants different supplier in your network and
everybody should have access to this network? No problem, you give
every supplier a VPN-username and passwort, define in the destination
device a user-dependent network-access and after positiv login he only
can communicate to the released ip-addresses.
9
Separate your machine-net from the office-net
You need a separation between the machine-net and the office-net? No
problem, plug a PCMCIA-LAN-card in your Tele-Prof-II-device (only for
version -H) and the separation is OK. You have access to both nets via
remote maintenance.
PLC coupling (data exchange between PLCs)
S7-CP-alternate (without LAN-CP to the PLC)
Do you have a PLC without CP343-1 or CP443-1 and a TP-II as remote
maintenance device? Then activate the CP-mode of the TP-II and your
visualisation goes directly ONLINE via the LAN of the TP-II.
Failure report transmission without any change in the PLC
programm
PLC - Remote maintenance
Your pumping stations report the water levels of the central control via
telephone network. The central office itself can of course transmit
commands/messages to the substations as well. Thereto no dedicated
line is required, a “normal” telephone connection is sufficient because the Your outstation reports the current value cyclically, or in case of
malfunction the status via FAX, as SMS to your mobile phone, to your
devices cut the line after occured message.
pager or also via e-mail. And this without an intervention of the
Failure report transmission released by the PLC
PLC-program. Here the variables and actions are stored and processed
in the TP-II.
Remote maintenance of centralized PLC-devices
Your outstation reports the current value cyclically, or in case of
malfunction the status via FAX, as SMS to your mobile phone, to your
pager or also via e-mail.
Sending ASCII-data to a PC
You have many PLC and you want to programm them central on one
place? No problem, you have to connect them all to the KOR/MUXTele-Switch, connect it with the TP-II and after telephone connect you will
be able with the PD-bus-selection of your Step5-software to go ONLINE.
Of course the MOR/MUX-Tele-Switch is cascadable, so you can connect
up to 30 PLCs to the devices.
Direct-mode "extended serial interface"
Your car park or control sends the configuration / capacity utilisation to a
PC with a modem, so that the data can be used for further processing.
Data logger with FTP-interface
There is an unsupported control or data logger or converter integrated in
your installation which protocol is not supported? No problem, the signs
that the PC in the office sends will be transferred via telephone line by the
Direct-mode, and on-site reproduced by the TP-II. The way back is
identical. So in that case there’s also a communication to the electronic
devices available.
10
You need a data logger which tape-records the specified data of the PLC
and you can collect the data via FTP on demand. No problem, TP-II with
the option Datalogger is the solution for you.
article:
Art. ID.
name
price
9372-OEM TELE-PROFessional II worldwide use
OEM - Version (all accessories optional) without PCMCIA-Slot for UMTS-/LAN-card
variants:
Art. ID.
name
price
9372-OEM-H TELE-PROFessional II worldwide use
OEM - Version (all accessories optional) with PCMCIA-slot for UMTS-/LAN-Card
9372-FLAT
TELE-PROFessional II worldwide use "FLAT"
flat version / OEM - Version (all accessories optional) without PCMCIA-slot for UMTS-/LAN-card
9372-FLAT-H TELE-PROFessional II worldwide use "FLAT"
flat version / OEM - Version (all accessories optional) with PCMCIA-slot for UMTS-/LAN-Card
accessories:
name
9359.1:1
1:1 cable 9pins D-SUB
D-SUB 9pins (male) <=> D-Sub 9pins (female), 1to1-assignment
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9391-MT
Mounting set
for DIN-rail-holder
9636-CROSS
Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning
9379.1
MPI-/Profibus connecting cable 1m
connects MPI-modem/TP-II with the S7-PLC
9636-TCPIP
Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1
9361-3
S5-connecting cable 3m
forTELE-PROF, MINI-/PG-MUX-II
9361-3.05M
S5-connecting cable 5m
for TELE-PROF, MINI-/PG-MUX-II
9361-3.06M
S5-connecting cable 6m
for TELE-PROF, MINI-/PG-MUX-II
9361-3.10M
S5-connecting cable 10m
for TELE-PROF, MINI-/PG-MUX-II
9371-6
Servicebag
for TP, TB + TP-II-FLAT
9372-24
Power connector 3pins big
connector plug lockable by jack with screws
9370-TAE
TAE junction box
analogue telephone box (NFN) for on-wall mounting
9372
TELE-PROFessional II Starter-Kit
completing 9372-OEM
9370-SET
Phone-connector-set 16parts
worldwide use
9370-8-D/USA
Phone-cable analogue Germany+USA
RJ12 plug <=> RJ12 plug with TAE-adapter for Germany
9370-8-ISDN
Phone-cable ISDN
RJ45 plug <=> RJ45 plug, assigned 1to1
9370-8-BE
Special phone-cable for Belgium
RJ12 plug <=> telephone plug of Belgium
9370-8-DK
Special phone-cable for Denmark
RJ12 plug <=> telephone plug of Denmark
9370-8-FR
Special phone-cable for France
RJ12 plug <=> telephone plug of France
9370-8-GB
Special phone-cable for Great Britain
RJ12 plug <=> telephone plug of Great Britain
9370-8-NL
Special phone-cable for Netherlands
RJ12 plug <=> telephone plug of the Netherlands
9370-8-CH
Special phone-cable for Switzerland
RJ12 plug <=> telephone plug of Switzerland
9370-8-AT
Special phone-cable for Austria
RJ12 plug <=> telephone plug of Austria
9372-UMTS-Ant
UMTS directional antenna
external antenna for the UMTS-card
price
PLC - Remote maintenance
Art. ID.
9372-UMTS-Card UMTS-card for TP-II
Option GLOBETROTTER GT MAX HSUPA
9352.1
USB-cable plug/plug Type A-A 3m
USB 1.1 / 2.0 up to 480 MBit
11
Facilities management world wide – remote maintenance and diagnosis via telephone
secured modem-protocol, no additional software needed
high throughput
no PLC-crash possible
all online functions possible
compatible to SIMATIC-S7-200/300/400
compatible to all SIMATIC-S5-PLC’s
supports operation on H1, L1, L2 regarding path selection
supports the operation KOR/MUX of Siemens, as well as PD-BUS
easy handling because of menu navigation and display in plain text
easy and quick configuration by menu item initial configuration
multi-stage password levels provide high data security
cost improvement because of call-back function
PD-PD-coupling possible
integrated telephone directory
compatible to all TELE-Network-devices
integrated MUX as 2. PD-socket on Siemens
analogue modem for world wide use
EMC-compatible circuit arrangement
other PLC-protocols with optional Tele-Manager reloadable
software-updates via telephone line transferable
incl. modem cable and power supply unit
Technical Specifications:
PLC - Remote maintenance
Supply voltage:
24V/DC +/- 20%
Power consumption:
5 watt
Display:
expressive LCD-display
Handling/Configuration:
integrated keypad
Tele-Manager
Interfaces:
to the PLC:
TTY/20mA current loop (AG-TELE aktiv, PLC passiv)
RS232: 9,6 KBd - 115,2 KBd / fully assigned
to the PD/PC:
TTY/20mA current loop (100 % mechanically and electr. compatible)
RS232: 9,6 KBd - 115,2 KBd / with a 1on1-cable to the PC
others:
1 x parallel port, 1 x PCMCIA
Integrated modem:
33K6-analogue modem with BZT-approval
Operating temperature:
5 - 55°C
Case:
powder coated metal case with mounting flange
Dimensions:
280 x 170 x 55 mm
Remote maintenance / telecontrol of PLC-devices
PLC coupling (data exchange between PLCs)
Your pumping stations report the water levels of the central control via
telephone network. The central office itself can of course transmit
Access to the connected PLC takes place by coupling via Analogue-, commands/messages to the substations as well. Thereto no dedicated
ISDN- (only with AB-adapter) and GSM-(only with external line is required, a “normal” telephone connection is sufficient because the
GSM-modem)-line.
devices hangs up the line after occured message.
PLC-coupling (data exchange between PLC-devices)
Sending ASCII-data to a PC
Your car park or control sends the configuration/capacity utilisation to a
PC with a modem, so that the data can be used for further processing.
12
Your outstation reports the current value cyclically, or in case of
malfunction the status via FAX, to your mobile phone as SMS or to your
pager.
Direct-mode „extended serial interface“
There is an unsupported control or data logger or converter integrated in
your installation which protocol is not supported? No problem, the signs
that the PC in the office sends will be transferred via telephone line by the
Direct-mode , and on-site reproduced by the TP/TB. The way back is
identical. So in that case there’s also a communication to the electronic
devices available.
article:
Art. ID.
9371
name
price
TELE-PROFessional worldwide PLC remote maintenance
German version (complex adaptation)
options:
Art. ID.
name
9370-11 Option ASCII-TELE
ASCII-transfer of DB-contents from S5/7-PLC to a modem
9370-3
Option FAX-TELE
sending DB-contents from S5/7-PLC to a fax machine
9370-7
Option H1 with CP-cable
programming of S5-PLC's with a CP via H1-bus with PD-path selection
9370-6
Option L1 with CP-cable
programming of S5-PLC's with a CP via L1-bus with PD-path selection
9370-5
Option L2 with CP-cable
programming of S5-PLC's with a CP via L2-bus with PD-path selection
9370-2
Option PLC-TELE
transfer of DB-contents between S5/7-PLC's
9370.A
Option TP+TB AEG
TELE-PROFessional for AEG A120,A250
9370.AB Option TP+TB Allen-Bradley
TELE-PROFessional for Allen-Bradley
9370.B
Option TP+TB Bosch
TELE-PROFessional for Bosch
9370.G
Option TP+TB GE-Fanuc
TELE-PROFessional for GE-Fanuc
price
PLC - Remote maintenance
9371-USTELE-PROFessional
worldwide PLC remote maintenance
USA-version
9370.KM Option TP+TB Klöckner-Moeller
TELE-PROFessional for Klöckner-Moeller
9370.M
Option TP+TB Mitsubishi
TELE-PROFessional for Mitsubishi
9370.P
Option TP+TB Pilz
TELE-PROFessional for Pilz PSS
9370.T
Option TP+TB Telemechanique
TELE-PROFessional for Telemechanique
13
accessories:
Art. ID.
PLC - Remote maintenance
14
name
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9391-MT
Mounting set
for DIN-rail-holder
9370-ISDN
ISDN-adapter for analogue terminals
full ISDN-functionality e.g. call waiting, 3-way conferencing, broker's call
9379-ANT
Magnetic base antenna
for TP, TS + MPI-Modem
9361-3
S5-connecting cable 3m
forTELE-PROF, MINI-/PG-MUX-II
9361-3.05M
S5-connecting cable 5m
for TELE-PROF, MINI-/PG-MUX-II
9361-3.06M
S5-connecting cable 6m
for TELE-PROF, MINI-/PG-MUX-II
9361-3.10M
S5-connecting cable 10m
for TELE-PROF, MINI-/PG-MUX-II
9370-COM
Serial PCMCIA-adapter
for TP + TB
9371-6
Servicebag
for TP, TB + TP-II-FLAT
9370-SLM
Leased-line modem for TP
only usuable as pairs
9371-24
Power connector 2pins big
connector plug lockable by jack with screws
9370-TAE
TAE junction box
analogue telephone box (NFN) for on-wall mounting
9370-SET
Phone-connector-set 16parts
worldwide use
9370-8-D/USA Phone-cable analogue Germany+USA
RJ12 plug <=> RJ12 plug with TAE-adapter for Germany
9370-8-ISDN
Phone-cable ISDN
RJ45 plug <=> RJ45 plug, assigned 1to1
9370-8-BE
Special phone-cable for Belgium
RJ12 plug <=> telephone plug of Belgium
9370-8-DK
Special phone-cable for Denmark
RJ12 plug <=> telephone plug of Denmark
9370-8-FR
Special phone-cable for France
RJ12 plug <=> telephone plug of France
9370-8-GB
Special phone-cable for Great Britain
RJ12 plug <=> telephone plug of Great Britain
9370-8-NL
Special phone-cable for Netherlands
RJ12 plug <=> telephone plug of the Netherlands
9370-8-CH
Special phone-cable for Switzerland
RJ12 plug <=> telephone plug of Switzerland
9370-8-AT
Special phone-cable for Austria
RJ12 plug <=> telephone plug of Austria
price
PLC-remote maintenance also available from the car, with 12V power supply
secured modem-protocol, no additional software needed
high throughput
all online functions possible
easy handling because of menu navigation and display in plain text
easy and quick configuration by menu item initial configuration
multi-stage password levels provide high data security
cost improvement because of call-back function
integrated telephone directory
compatible to all TELE-Network-devices
EMC-compatible circuit arrangement
other PLC-protocols with optional Tele-Manager reloadable
software-updates via telephone line transferable
incl. power supply unit
Supply voltage:
24V/DC (12 - 36V)
Power consumption:
3 watt
Display:
expressive LCD-display
Handling/Configuration:
integrated keypad
Tele-Manager
Interfaces:
to the PLC:
RS232: 9,6 KBd - 115,2 KBd / fully assigned
to the PD/PC:
TTY/20mA current loop (100 % mechanically and electr. compatible)
RS232: 9,6 KBd - 115,2 KBd / with a 1on1-cable to the PC
others:
1 x PCMCIA
Integrated modem:
-
Operating temperature:
5 - 55°C
Case:
powder coated metal table case
Dimensions:
233 x 162 x 39 mm
Use in the car with a 12V supply only
Remote maintenance / telecontrol of PLC-devices
Your’re on road with your car and your employee reports a failure? What
next? Approach the next parking place and try to get a telephone line to
solve the problem? Or solve the problem in your head? Hit the next
parking place and start your Tele-Book which is plugged on your car’s
Access to the connected PLC takes place by coupling via Analogue-,
cigarette lighter, and build-up a connection to your installation. With the
ISDN- (only with AB-adapter) and GSM-(only with external
notebook you will solve the problem within a short time.
GSM-modem)-line.
PLC-coupling (data exchange between PLC-devices)
PLC - Remote maintenance
Technical Specifications:
Failure report transmission released by the PLC
Your pumping stations report the water levels of the central control via
telephone network. The central office itself can of course transmit
commands/messages to the substations as well. Thereto no dedicated
Your outstation reports the current value cyclically, or in case of
line is required, a “normal” telephone connection is sufficient because the
malfunction the status via FAX, to your mobile phone as SMS or to your
devices hangs up the line after occured message.
pager.
15
Sending ASCII-data to a PC
Direct-mode „extended serial interface“
Your car park or control sends the configuration/capacity utilisation to a
PC with a modem, so that the data can be used for further processing.
There is an unsupported control or data logger or converter integrated in
your installation which protocol is not supported? No problem, the signs
that the PC in the office sends will be transferred via telephone line by the
Direct-mode , and on-site reproduced by the TP/TB. The way back is
identical. So in that case there’s also a communication to the electronic
devices available.
article:
Art. ID.
9380
name
price
TELE-BOOK PLC remote maintenance
as PLC-or PG-TELE switchable
options:
Art. ID.
name
price
PLC - Remote maintenance
9370-11 Option ASCII-TELE
ASCII-transfer of DB-contents from S5/7-PLC to a modem
9370-3
Option FAX-TELE
sending DB-contents from S5/7-PLC to a fax machine
9370-7
Option H1 with CP-cable
programming of S5-PLC's with a CP via H1-bus with PD-path selection
9370-6
Option L1 with CP-cable
programming of S5-PLC's with a CP via L1-bus with PD-path selection
9370-5
Option L2 with CP-cable
programming of S5-PLC's with a CP via L2-bus with PD-path selection
9370-2
Option PLC-TELE
transfer of DB-contents between S5/7-PLC's
9370.A
Option TP+TB AEG
TELE-PROFessional for AEG A120,A250
9370.AB Option TP+TB Allen-Bradley
TELE-PROFessional for Allen-Bradley
9370.B
Option TP+TB Bosch
TELE-PROFessional for Bosch
9370.G
Option TP+TB GE-Fanuc
TELE-PROFessional for GE-Fanuc
9370.KM Option TP+TB Klöckner-Moeller
TELE-PROFessional for Klöckner-Moeller
9370.M
Option TP+TB Mitsubishi
TELE-PROFessional for Mitsubishi
9370.P
Option TP+TB Pilz
TELE-PROFessional for Pilz PSS
9370.T
Option TP+TB Telemechanique
TELE-PROFessional for Telemechanique
accessories:
Art. ID.
9391.1
name
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9381.KABEL Analogue cable for TAE-modem PCMCIA
PCMCIA-modemcard connection <=> TAE plug Germany/USA (spare part)
16
9370-ISDN
ISDN-adapter for analogue terminals
full ISDN-functionality e.g. call waiting, 3-way conferencing, broker's call
9370-COM
Serial PCMCIA-adapter
for TP + TB
9371-6
Servicebag
for TP, TB + TP-II-FLAT
9372-24
Power connector 3pins big
connector plug lockable by jack with screws
9381
TAE-modemPCMCIA-card for TELE-BOOK
pcmcia-card inclusive telefon-lead and TAE-adapter
9370-TAE
TAE junction box
analogue telephone box (NFN) for on-wall mounting
9380-9S
Connecting cable TELE-Book on Slot-PLC
from Siemens
price
configuration / update of TELE-Network devices from PC (Windows-Software)
reading out and updating of TELE-Network devices’ firmware comfortable from PC
saving and reloading of configuration
administration of several TELE-Network devices
With the TWIN option 2 PLC types (firmware-files) can be loaded parallel into a TP device
article:
Art. ID.
9370-TM
name
price
TELE-Manager for Windows 3.x
configuration / Update from PC (Windows Software)
9370-TM-2 TELE-Manager TWIN-option
parallel loading of 2 SPS-types (firmware-data sets) in a TP-device
Software-TELE-PROFessional for all devices in the TELE-Network
comfortable telephone book
intern/external analogue and ISDN-standard modems useable
no external TELE-device on PC-side necessary
ideal for on the way use
also with original Siemens STEP5/7-programming software via virtual COM-Port
supports TCP/IP-Router of the TELE-PROFessional II
remote configuration of TELE-Network devices
Win NT/2000/XP supported
a 56k Modem is necessary on PC-side
WinTELEPROF-software = software-PG-TELE
Your’re using the devices of the Tele-Network-family and don’t want to
have a device standing on the table? No problem. Install the
WinTELEPROF-software on your PC and after link connection access to
your Step5/7-programming software (also Siemens) via a virtual
Com-Port.
At Step5 the Step5-software is going to be patched, then working with the
virtual Com-Port will be also possible.
PLC - Remote maintenance
replacement of the PD-TELE at telephone bounded remote maintenance
17
article:
Art. ID.
name
9371-PC-S5
Win-TELE-PROF S5 Ground package TP
9371-PC-S5-F
Win-TELE-PROF S5 Ground package TP
9371-PC-S5-S
Win-TELE-PROF S5 Ground package TP
9372-PC-S5
Win-TELE-PROF S5 Ground package TP-II
9372-PC-S5-F
Win-TELE-PROF S5 Ground package TP-II
9372-PC-S5-S
Win-TELE-PROF S5 Ground package TP-II
9371-PC-S5-X
Win-TELE-PROF S5 Add-on package TP
price
9371-PC-S5-F-X Win-TELE-PROF S5 Add-on package TP
9371-PC-S5-X-S Win-TELE-PROF S5 Add-on package TP
9372-PC-S5-X
Win-TELE-PROF S5 Add-on package TP-II
9372-PC-S5-F-X Win-TELE-PROF S5 Add-on package TP-II
9372-PC-S5-X-S Win-TELE-PROF S5 Add-on package TP-II
PLC - Remote maintenance
9371-PC
Win-TELE-PROF S7 Ground package TP
9371-PC-F
Win-TELE-PROF S7 Ground package TP
9371-PC-S
Win-TELE-PROF S7 Ground package TP
9372-PC
Win-TELE-PROF S7 Ground package TP-II
9372-PC-F
Win-TELE-PROF S7 Ground package TP-II
9372-PC-S
Win-TELE-PROF S7 Ground package TP-II
9371-PC-X
Win-TELE-PROF S7 Add-on package TP
9371-PC-F-X
Win-TELE-PROF S7 Add-on package TP
9371-PC-X-S
Win-TELE-PROF S7 Add-on package TP
9372-PC-X
Win-TELE-PROF S7 Add-on package TP-II
9372-PC-F-X
Win-TELE-PROF S7 Add-on package TP-II
9372-PC-X-S
Win-TELE-PROF S7 Add-on package TP-II
Remote maintenance of PPI, MPI and Profibus <=> analogue 56K-, ISDN-, GSM-Modem
directly pluggable on the S7-300-profile rack
power supply from the S7-PLC or external
SMS and e-mail sending directly from S7-300/400
RS232-interface for configuration or on-site use as serial PC-Adapter
USB-interface for configuration or on-site use as USB-PC-Adapter
Online firmware update and diagnosis over telephone-connection
all TELESERVICE-devices inclusive S7-cable art.nr: 9377.1 (1m)
all TELESERVICE-devices inclusive specific telephone lead respectively GSM-antenna
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
5 watt
Display:
detailed status indication via 10 LEDs
Handling/Configuration:
Kabelmanager-Software
Interfaces:
to the PLC:
PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
to the PD/PC:
RS232: 9,6 KBd - 115,2 KBd / with a 1on1-cable to the PC
USB 1.1 jack type B
others:
-
Integrated modem:
56K-analogue modem / ISDN-modem / GSM-modem
Operating temperature:
5 - 55°C
Case:
single-size standard S7-300-case
Dimensions:
40 x 125 x 115 mm
Remote maintenance / telecontrol of PLC
Use on-site without PC-adapter?
The access to the connected PLC with the Siemens TS-software or With the TeleService-device you can connect serial or by USB-cable to
PG-2000 including TS-option results of coupling via Analogue-, ISDN- your PC/laptop and then communicate directly with the control without a
(only with AB-adapter) as well as GSM-line.
PC-adapter or other S7-programming cables.
The USB-cable is a standard-cable just as the one you use at your printer.
18
Failure report transmission released by the PLC
Atomic time (GPRS) for the PLC
Your outstation reports the current value cyclically, or in case of
malfunction the status via FAX, as SMS to your mobile phone, to your You need an exact time for your S7-plc? No problem, the
pager or also via e-mail.
TeleService-GSM fetches the current time via GPRS from a time-server
and advises it to the S7-plc. How often and whenever the time shall be
updated can be parameterised in the device.
article:
Art. ID.
name
price
9377-ANALOG-OP TELESERVICE ANALOGUE up to 12MBaud MPI+DP
without DP V0/V1/V2
9377-GSM-OP
TELESERVICE GSM up to 12MBaud MPI+DP
without DP V0/V1/V2
9377-ISDN-OP
TELESERVICE ISDN up to 12MBaud MPI+DP
without DP V0/V1/V2
Art. ID.
name
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9379-ANT
Magnetic base antenna
for TP, TS + MPI-Modem
9377.1
MPI-/Profibus connecting cable 1m
for Tele-Service
9371-24
Power connector 2pins big
connector plug lockable by jack with screws
9370-TAE
TAE junction box
analogue telephone box (NFN) for on-wall mounting
9370-SET
Phone-connector-set 16parts
worldwide use
9370-8-D/USA Phone-cable analogue Germany+USA
RJ12 plug <=> RJ12 plug with TAE-adapter for Germany
9370-8-ISDN
Phone-cable ISDN
RJ45 plug <=> RJ45 plug, assigned 1to1
9370-8-BE
Special phone-cable for Belgium
RJ12 plug <=> telephone plug of Belgium
9370-8-DK
Special phone-cable for Denmark
RJ12 plug <=> telephone plug of Denmark
9370-8-FR
Special phone-cable for France
RJ12 plug <=> telephone plug of France
9370-8-GB
Special phone-cable for Great Britain
RJ12 plug <=> telephone plug of Great Britain
9370-8-NL
Special phone-cable for Netherlands
RJ12 plug <=> telephone plug of the Netherlands
9370-8-CH
Special phone-cable for Switzerland
RJ12 plug <=> telephone plug of Switzerland
9370-8-AT
Special phone-cable for Austria
RJ12 plug <=> telephone plug of Austria
9352.2
USB-cable plug/plug Type A-B 3m
USB 1.1 / 2.0 up to 480 MBit
price
PLC - Remote maintenance
accessories:
19
Programming of S7-PLC’s via telephone from afar
standard modem-protocol, the Siemens TS-software is needed
analogue modem for world wide use
data transmission via radio (GSM)
screwable antenna/prolongable (GSM)
for Siemens-S7-Teleservice
incl. modem-cable and S7-cable (1m)
GSM-Modem incl. magnetic base antenna and S7-cable (1m)
Technical Specifications:
PLC - Remote maintenance
Supply voltage:
24V/DC +/- 20%
Power consumption:
5 watt
Display:
expressive LCD-display
4 status-LEDs
Handling/Configuration:
integrated keypad
Interfaces:
to the PLC:
PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
to the PD/PC:
RS232: 9,6 KBd - 115,2 KBd / with a 1on1-cable to the PC
others:
-
Integrated modem:
33K6-analogue modem
GSM-modem
Operating temperature:
5 - 55°C
Case:
powder coated metal case with mounting flange
Dimensions:
165 x 90 x 50 mm
Remote maintenance / telecontrol of PLC
Use on-site without PC-adapter?
The access to the connected PLC with the Siemens TS-software or With the MPI/PPI/Profibus-modem you can connect serial to your
PG-2000 including TS-option results of coupling via Analogue-, ISDN- PC/laptop and then communicate directly with the PLC without a
(only with AB-adapter) as well as GSM-line.
PC-adapter or other S7-programming cables.
article:
Art. ID.
9379-OP
name
price
MPI/PPI-Modem
maximum baud rate MPI- and Profibus up to 12Mbaud
9379-G-OP MPI/PPI-Modem GSM
maximum baud rate MPI- and Profibus up to 12Mbaud
accessories:
Art. ID.
name
9359.1:1
1:1 cable 9pins D-SUB
D-SUB 9pins (male) <=> D-Sub 9pins (female), 1to1-assignment
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9370-ISDN
ISDN-adapter for analogue terminals
full ISDN-functionality e.g. call waiting, 3-way conferencing, broker's call
9379-ANT
Magnetic base antenna
for TP, TS + MPI-Modem
9379.1
MPI-/Profibus connecting cable 1m
connects MPI-modem/TP-II with the S7-PLC
9372-24
Power connector 3pins big
connector plug lockable by jack with screws
9370-TAE
TAE junction box
analogue telephone box (NFN) for on-wall mounting
9370-SET
Phone-connector-set 16parts
worldwide use
9370-8-D/USA Phone-cable analogue Germany+USA
RJ12 plug <=> RJ12 plug with TAE-adapter for Germany
20
price
accessories:
Art. ID.
name
9370-8-BE
Special phone-cable for Belgium
RJ12 plug <=> telephone plug of Belgium
9370-8-DK
Special phone-cable for Denmark
RJ12 plug <=> telephone plug of Denmark
9370-8-FR
Special phone-cable for France
RJ12 plug <=> telephone plug of France
9370-8-GB
Special phone-cable for Great Britain
RJ12 plug <=> telephone plug of Great Britain
9370-8-NL
Special phone-cable for Netherlands
RJ12 plug <=> telephone plug of the Netherlands
9370-8-CH
Special phone-cable for Switzerland
RJ12 plug <=> telephone plug of Switzerland
9370-8-AT
Special phone-cable for Austria
RJ12 plug <=> telephone plug of Austria
price
Long distance report- and information systems
Digital in-/outputs, each one configurable as opener or closer
8 report targets per input
Fax, e-mail, SMS, Pager and Voice (fixed report texts)
inclusive modem-cable
Analogue:
GSM:
Event-Modem A100 ECO
Event-Modem G100 ECO
analogue modem V92
4 digital inputs, 4 digital outputs
Event-Modem A200
GSM-Dualband-Modem
4 digital inputs, 4 digital outputs
Event-Modem G200
analogue modem V92
8 digital in-/outputs
2 analogue inputs / 2 analogue outputs
voice response of the digital- / analogue values
data logger funktion
remote maintenance/remote switching via modem and
web-interface
Event-Modem A242
composed of Event-Modem A200 and X332
GSM-Dualband-Modem
8 digital in-/outputs
2 analogue inputs / 2 analogue outputs
voice response of the digital- / analogue values
data logger funktion
remote maintenance/remote switching via modem and
web-interface
Event-Modem G242
composed of Event-Modem G200 and X332
8 + 32 digital in-/outputs
2 analogue inputs
PLC - Remote maintenance
Basic model:
8 + 32 digital in-/outputs
2 analogue inputs
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
4 watt
Display:
Web-Browser
Handling/Configuration:
4 DIP-Switch for operating states
Interfaces:
to the PLC:
digital in-/outputs
analogue in-/outputs
to the PD/PC:
RS232
RS485
others:
-
Integrated modem:
analogue modem V92 / GSM-modem
Operating temperature:
-20 - +60°C
Case:
plastic case for DIN-rail mounting
Dimensions:
110 x 125 x 60 mm
21
Direct Voice - speach output with EventModem
Direct Fax
The receiver will be called by conventional telephone network or by
mobile phone with a direct voice message. If a connection comes off the By direct dialling up the fax machine a message is carried out to a
message will be transmitted.
fax-receiver. If a connection comes off the message will be transmitted.
Remote Maintenance via keyboard and voice
Remote switching with Eventmodem to Eventmodem
The EventModem remote station will be called directly by conventional
Telephone network or by. If a connection comes off, digital In- and Outputs The EventModem will be called by conventional Telephone network or by
for teleswitching will be transmitted. Each device can both transmit state mobile phone. With a direct voice message and DTMF–tone dialling the
of things and accordingly receive switch signals.
corresponding output will be set-up. If a switching operation has come off
a speech output will confirm it.
Message via SMS (SMSC)
Data logging
PLC - Remote maintenance
A SMS to a mobile phone is basically send by SMSC. Within the
GSM-network it takes place via on-net SMSC. Thereby it’s unimportant in
which mobile network the receiver is.
The message is activated by:
- digital contacts (relays, motion detector...)
- serial interface (PLC, PC, Microcontroller ...) bitserial (PLC)
The detection system transmits the SMS to the mobile network operator.
The mobile network operator provides the SMS to the mobile phone.
Optionally the detection system dials the mobile phone to „wake up“ the
receiver or to initiate the confirmation handling.
Cyclic data logging or data logging on occasion is realisable. The log
data will be transmitted e.g. once a day via e-mail.
Special data logger functions can be implemented on request and are not
part of the basis functions.
22
To switch a EventModem-output via SMS
Switching an output via SMS is an integrated function of the
EventModem. Herewith the switching operation will be secure and
comprehensible from afar.
article:
name
price
15300 Event-Modem A100 ECO
Analogue modem with 4 digital inputs, 4 digital outputs
15301 Event-Modem A200
Analogue modem with 8 digital in-/outputs (selectable) and 2 analogue inputs / 2 analogue outputs
15304 Event-Modem A242
analogue modem with 8 dig. I/O (selectable) + 32 digital inputs + 2 analouge inputs
15302 Event-Modem G100 ECO
GSM-dual band-modem with 4 digital inputs, 4 digital outputs
15303 Event-Modem G200
GSM-dual band-modem with 8 digital in-/outputs (selectable) and 2 analogue inputs / 2 analogue outputs
15305 Event-Modem G242
GSM modem with 8 dig. I/O (selectable) + 32 digital inputs + 2 analouge inputs
accessories:
Art. ID.
name
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9379-ANT
Magnetic base antenna
for TP, TS + MPI-Modem
9370-TAE
TAE junction box
analogue telephone box (NFN) for on-wall mounting
9370-SET
Phone-connector-set 16parts
worldwide use
price
PLC - Remote maintenance
Art. ID.
9370-8-D/USA Phone-cable analogue Germany+USA
RJ12 plug <=> RJ12 plug with TAE-adapter for Germany
9370-8-BE
Special phone-cable for Belgium
RJ12 plug <=> telephone plug of Belgium
9370-8-DK
Special phone-cable for Denmark
RJ12 plug <=> telephone plug of Denmark
9370-8-FR
Special phone-cable for France
RJ12 plug <=> telephone plug of France
9370-8-GB
Special phone-cable for Great Britain
RJ12 plug <=> telephone plug of Great Britain
9370-8-NL
Special phone-cable for Netherlands
RJ12 plug <=> telephone plug of the Netherlands
9370-8-CH
Special phone-cable for Switzerland
RJ12 plug <=> telephone plug of Switzerland
9370-8-AT
Special phone-cable for Austria
RJ12 plug <=> telephone plug of Austria
23
With each interface of your PC to the S7-PLC
multifunctional, several functions in one product
well-priced alternative to high-priced original products
easy handling and therefore quick operation
application table:
MPI/PPI
MPI - II
MPI - USB
MPI - LAN
S7 - LAN
PPI 9.6 KBit/s - 19.2 KBit/s
Multimaster 9.6 KBit/s - 187.5 KBit/s
MPI-Bus
x
x
x
x
x
x
x
x
x
19.2 KBit/s
187.5 KBit/s
1.5 MBit/s
Profibus
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x(7)
x
PPI-Bus
S7 - interface cables
9.6 KBit/s
19.2 KBit/s
45.45 KBit/s
93.75 KBit/s
187.5 KBit/s
500 KBit/s
1.5 MBit/s
3.0 MBit/s
6.0 MBit/s
12.0 MBit/s
Profibus-profile
x
DP
standard
universal(DP/FMS)
RS 232
x(12)
x(12)
x
x
x
9.6 KBit/s
19.2 KBit/s
38.4 KBit/s
57.6 KBit/s
115.2 KBit/s
USB
x(19)
x
x
x(9)
x(9)
x(19)
x
x
x(9)
x(9)
USB 1.1 (6)
LAN
x(1)
x
10/100BaseTx
TeleService operation
with S7-300/400
baud rates at TS-operation directly at the PC
x(14)(18)
x(14)(18)
x
x
x(8)
x(8)
x
x
x(8)
x(8)
9.6 KBit/s
19.2 KBit/s
38.4 KBit/s
57.6 KBit/s
115.2 KBit/s
HMI
x
x
x
x
x
x
x
x
x
x
9.6 KBit/s
19.2 KBit/s
38.4 KBit/s
57.6 KBit/s
115.2 KBit/s
update
x
x
x
x
x
x
x
x
x
x
x(13)
x(13)
x(13)
x(13)
x(13)
x(13)
x(13)
x(13)
x(13)
x(13)
x(13)
x(13)
x(13)
x(13)
x(13)
x(10)
x(10)
x(15)
x(15)
x(15)
x
x
x
x
x
x
x
x
1
1
8
x
9.6 KBit/s
19.2 KBit/s
38.4 KBit/s
57.6 KBit/s
baud rates at TS-operation directly with a modem
firmware-update
input/online help
keypad
display
simultaneous PD connections
24
x
PLCVCOM
RFC1006
8
x
simultaneous AG connections
passive subscriber
active subscriber
more functions
1
126
15
126
webserver for configuration
status/control variable(20)
S7 on S7/S5 DB exchange(20)
S5 on MPI DB exchange(20)
S7 on MPI (Send/Fetch)(20)
Profinet Gateway(20)
MPI-Printer(network, lpr)(20)
galvanic separation
wall monuting
(with opt. wall mounting-set)
upgrading with
15
126
15
126
x
x
x
x
x
x
x
x
x
x
x
x
x
1KV
1KV
1KV
1,5KV
1,5KV
x
x
x
x
CheapConn+cable
supports
x
x
x
x
WIN 98
WIN 98 SE
WIN ME
WIN NT
WIN 2000
WIN XP Home (4)
WIN XP Professional
Vista(32bit)
x
x
x
x
x
x
x
x
x(3)
x
x
x(5)
x
x
x
x
x
x
x(5)
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
(1) just with USB-cable plug <-> plug, type A <-> A, item number: 9352.1
(3) only serial communication
(4) Siemens Step7 V5.2 and higher dont run with this operationing system
(5) USB-communication is only possible with the special driver for Win NT
(6) USB 2.0 is backward compatible to 1.1
(7) Cable is designed for direct connection to PC network card socket. It can also be a hub / switch with uplink port or operat ed at a hub / switch
with automatic detection of assignement and adaptation
(8) only in combination with the MPI-Speed-driver („continously-active“)
(9) Siemens Step7 supports these baud rates only with the MPI-Speed-Utility
(10) Update directly with PC or via Tele-Network if the cable is connected to a device of the Tele-Network-family (Tele-Link, T ele-Book or
Tele-Professional)
(11) only in the mode: MultiMaster-Mode
(12) up to a maximum baud rate of 187.5 KBit/s
(13) In this transmission, the baud rate is irrelevant, because it communicates via a virtual COM-port.
(14) with the use of the TS-adapter / item number: 9350.TS
(15) Update directly with PC via virtual COM-Port
(18) Operation requires Step 7 with additional software Tele-Service (TS) from Siemens
(19) only at PPI-communication possible
(20) option with costs
S7 - interface cables
to the bus (screen connected through)
mounting
15
126
25
Service-suitcase for couppling to a S7-PLC over LAN/WLAN incl. all accessories
practical and stable plastic case with two airtight closures
includes all what is needed for S7-communication
connects comfortable PC with PLC via LAN or WLAN (also Ad-Hoc mode)
scobe of delivery: S7-LAN module, S7-WLAN-Bridge, Cross-Over-cable, USB-cable and short patch-cable
also for S7-1200 usable
Universally to the S7-PLC-Control
S7 - interface cables
You have to build up a connection to your S7-PLC and preferentially over
LAN/WLAN? No problem, you drive to your plant and take with the
S7-WLAN-SET. The set includes all you need to couple. You plug the
S7-LAN an your S7-PLC, on top of this the configured S7-WLAN-Bridge.
Connect both devices with the delivered short patch-cable and the
connection to your notebook in the Ad-Hoc-mode will be OK. Of course,
you can also use an WLAN-router, if there would be one existant. Or you
connect the S7-LAN with the delivered Cross-Over-cable direct with the
PC and you will be also online on the PLC. No matter which way you ever
will use, with the S7-WLAN-SET you will be prepared for everything.
article:
Art. ID.
name
9352-S7-WLAN-SET S7-WLAN-SET
Service-suitcase for couppling to a S7-PLC over WLAN
consisting of: S7-LAN, S7-WLAN-Bridge, Cross-Over-cable , USB-cable, short Patch-cable
26
price
Connecting your ethernet-participants direct to your WLAN-network
Suitable for DIN-rail EN 60715 TH35 and wall-mounting
For S7-1200, S5-LAN++, S7-LAN and Ethernet-CPs usable
Connecting a network subscriber via WLAN to an Access Point
Ad-hoc capable for direct programming with the laptop
Auto-negotiation of the RJ45-Ethernet jack
Power supply 24V DC over spring clip; while configuration from USB of the connected PC
Spring clips for conductors with max. 2.5 mm² and eyelets, terminals and tabs
simply parameterizing via USB
CE / EMC compliant design
Used plastic complies UL 94 V-0
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
5V/DC USB
Power consumption:
1,2 watt
Display:
2 status-LEDs
Handling/Configuration:
S7BridgeConfig-software
Interfaces:
to the PLC:
10/100BaseTX RJ45-ethernetplug
to the PD/PC:
WLAN connection (802.11 b/g)
Mini-USB-B-jack (for Configuration)
Operating temperature:
5 - 55°C
Case:
plastic case UL 94 V-0
Dimensions:
90 x 59 x 18 mm
S7 - interface cables
Universal transfer of LAN-products into WLAN
You have a variety of LAN products and would like to communicate to
them via WLAN? No problem, with the WLAN-Klemme you will be able to
contact all these products.
article:
Art. ID.
name
price
9352-WLAN-Klemme WLAN-Klemme
connection of a network client via WLAN to an Access-Point or in AdHoc-mode
accessories:
Art. ID.
9391.1
name
price
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9352-S7-WLAN-Bridge-ANT Magnetic base antenna for S7-WLAN-Bridge, WLAN-Klemme
cable length: 3m
9636-TCPIP.02M
Patch-cable 0.25m, Cat5e, shielded
RJ45 plug <=> RJ45 plug, 1:1
27
Wireless programming with a S7-LAN directly at the laptop or in the corporate network
Connecting a network subscriber via WLAN to an Access Point
To link to a S7-PLC a S7-LAN is a needed
Ad-hoc capable for direct programming with the laptop
Auto-negotiation of the RJ45-Ethernet jack
Power supply from the S7 controller or external; while configuration from USB of the connected PC
with full PG - diagnostic socket
simply parameterizing via USB
CE / EMC compliant design
also for S7-1200 usable
Technical Specifications:
S7 - interface cables
Requirement:
programming tool from LAN to MPI/Profibus
like S7-LAN or MPI-LAN is required!
Supply voltage:
24V/DC +/- 20%
5V/DC USB
Power consumption:
1,2 watt
Display:
2 status-LEDs
Handling/Configuration:
S7BridgeConfig-software
Interfaces:
to the S7-LAN:
10/100BaseTX RJ45-ethernetplug
to the PD/PC:
9pin PD/diagnosis jack
WLAN connection (802.11 b/g)
Mini-USB-B-jack (for Configuration)
Operating temperature:
5 - 55°C
Case:
ABS-plastic case
Dimensions:
65 x 43 x 17 mm
Without LAN-cable round of the PLC
Your’re right in the middle of your production line and and should move
around the machine and simultaneously observe / manage. No problem,
you parameterize the S7-WLAN-Bridge, connect to the S7-LAN and
connect to an access-point or with the ad-hoc-network of your laptop and
are ONLINE on the PLC.
article:
Art. ID.
name
price
9352-S7-WLAN-Bridge S7-WLAN-Bridge
connection of a network client via WLAN to an Access-Point or in AdHoc-mode
needed accessories:
Art. ID.
name
price
9352-LANCON S7-LAN connector
Ethernetmodule for PPI/MPI/Profibus
accessories:
Art. ID.
name
9352-S7-WLAN-Bridge-ANT Magnetic base antenna for S7-WLAN-Bridge, WLAN-Klemme
cable length: 3m
28
9636-TCPIP.02M
Patch-cable 0.25m, Cat5e, shielded
RJ45 plug <=> RJ45 plug, 1:1
9352.3
USB-cable plug/plug Type A-B-Mini 3m
USB 1.1 / 2.0 up to 480 MBit
price
smallest ethernet-gateway with PD-socket, multifunctional, 1 adapter for all PPI, MPI and Profibus
applications
with ext. 24V-connector
automatic protocol- and baud rate detection
firmwareupdate via internet for free
PPI - adapter for S7 - 200
MPI - adapter for S7 - 300 + 400
CE/EMC compliant construction
applicable with original Siemens programming software by included software
power supply from the S7-PLC or external
network configuration free adjustable
VPN remote maintenance possible / for the maintenance of the PLC via Internet
with full PD – diagnosis socket
coupling of two PLC's S7 - S7 / S7 -S5 is possible with the Gateway type
Supply voltage:
24V/DC +/- 20%
Power consumption:
2 watt
Display:
Web-Browser
2 status-LEDs
Handling/Configuration:
Web-Browser
Kabelmanager-Software
Interfaces:
to the PLC:
PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
to the PD/PC:
PD/diagnosis jack
10/100BaseTX RJ45-ethernet jack
Galvanic separation:
1500V PPI/MPI/Profibus to the PC
Operating temperature:
5 - 55°C
Case:
ABS-plastic case
Dimensions:
65 x 43 x 17 mm
Programming of S7-PLC-devices via LAN
Watching of S7-PLC-devices via LAN without Ethernet-CP
You would like to respond to your S7-PLC-device via LAN but not
integrate an Ethernet-CP? No problem, plug the S7-LAN or also the
MPI-LAN-cable on the MPI/PPI/Profibus-interface and access via LAN.
S7 - interface cables
Technical Specifications:
Your panel only has a LAN-socket as PLC-interface? No problem,
connect this socket with the S7-LAN or the MPI-LAN-cable and plug it
directly on the PPI/MPI/Profibus of the PLC. Then access to the variables
and data of the PLC is already available.
S7-CP-replacement (without LAN-CP to the PLC-device)
Remote maintenance of your S7-PLC-device via LAN / Internet
Do you have a S7-PLC-device without CP243-1, CP343-1 or CP443-1
You have access to a on-site network and your PLC-device has no
and would like to connect via LAN? Then plug the S7-LAN on the
LAN-connection? No problem, plug the S7-LAN on the PLC-device and
PLC-device and your access via RFC1006 is ready for use.
you will have immediate access to the PLC from afar.
29
Without LAN-cable round of the PLC
Transformation of Rack/Slot in TSAP to MPI-address
Your’re right in the middle of your production line and and should move
around the machine and simultaneously observe / manage. No problem,
you parameterize the S7-WLAN-Bridge, connect to the S7-LAN and
connect to an access-point or with the ad-hoc-network of your laptop and
Your panel or visualisationsystem addresses the used PLC with
are ONLINE on the PLC.
Rack/Slot in TSAP? No problem, activate this mode in the S7-LAN and
you will get actual data from the PLC.
PLC coupling (data exchange between PLC-devices)
Actual time for the PLC?
S7 - interface cables
Your pumping stations report the water levels of the central control via
telephone network. The central office itself can of course transmit
commands/messages to the substations as well. Thereto no dedicated
line is required, it’s sufficient when the stations connect via network
You need in your PLC a actual time? No problem, with the NTP-option the
(DSL-router).
S7-LAN-module get from a NTP-(Time-)Server the actual time and
transfers it direct into the configured PLC or for processing in a DB.
Variable-chart without Step7-programming package
Malfunctions on the Bus although everything is (apparently)
connected properly?
You would like to give your customer the opportunity to read current The S7-LAN can also be used for controlling/checking the MPI/Profibus. It
numbers of the manufacturing Online, without installing a visualisation or will be plugged on the Bus so that you can take a look at the status of the
even the STEP7-package? Then a S7-LAN with the option „Status busses via software on PC, for example the numbers of parity errors.
Variable“ is needed, and your customer can take a look at these
password protected data on a site of the integrated webserver.
article:
Art. ID.
name
price
9352-LANCON S7-LAN connector
Ethernetmodule for PPI/MPI/Profibus
variant:
Art. ID.
name
price
9352-GATE S7-Gateway
PLC-PLC coupling
options:
Art. ID.
name
9352.NTP-Server
Option "NTP-Server for S7-PLC"
transfer of time from NTP-server into S7-PLC
9352-VAST
Option "Variable Control"
variables view in web browser
9352-WATCHDOG Option Watchdog
controlling of the connected MPI-/Profibus with webbrowser or over port
30
price
accessories:
Art. ID.
name
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9636-CROSS
Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning
9636-TCPIP
Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1
price
9352-S7-WLAN-Bridge S7-WLAN-Bridge
connection of a network client via WLAN to an Access-Point or in AdHoc-mode
9352-24
Power connector 2pins small
cable coupling by screw-connector (small)
S7-Interface cable for PPI, MPI, TS, HMI <=> RS232 applications
automatic protocol- and baud rate detection
firmwareupdate via internet for free
PPI - adapter for S7 - 200
MPI - adapter for S7 - 300 + 400
CE/EMC compliant construction
applicable with original Siemens programming software by included software
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
2 watt
Display:
double lined LCD-display
Handling/Configuration:
Kabelmanager-Software
Interfaces:
to the PLC:
PPI/MPI-bus interface: 9,6 KBd - 187,5 KBd
to the PD/PC:
RS232: 9,6 KBd - 115,2 KBd
Galvanic separation:
1000V PPI/MPI-bus to the PC
Operating temperature:
5 - 55°C
Case:
ABS-plastic case
Dimensions:
146 x 41 x 29 mm
Serial programming of the S7- PLC
Remote maintenance with TS-software without original TS-adaptor
S7 - interface cables
integrated display for output of diagnostic informations
applicable as TS/HMI adapter
double-sided connected cable
short plug to PLC
With the MPI/PPI-cable you have the ability to access a connected
SPC-PLC S7-200 (PPI 9600 Baud and 19200 Baud) as well as
You have to reach urgend your PLC via remote maintenance and have no
S7-300/400 (MPI/Profbus 9600 Baud up to 187500 Baud) via PC serial
TS-adaptor in your company? No problem, configure with the
with up to 115200 Baud for reading respectively writing of data.
MPI-Kabelmanager your S7-interface-cable MPI/PPI-Kabel the mode
"TS" for "remote maintenance", connect this cable with the TS-Adapter
Visualisation of your S7- PLC via COM-Port
(article number 9350-TS) with a standard modem and send it all to your
client. Now you will be able to start the connection with your TS-sofware
and solve the problem. And this all without buying a original TS-adapter.
Your panel provides a serial port and no MPI/Profibus for connecting a
S7-PLC. Connect the MPI/PPI-cable with it and you’re Online with your
panel.
31
article:
Art. ID.
9350
name
price
MPI+PPI+HMI+TS - Interfacecable 3m
with LCD-display
9350.05M MPI+PPI+HMI+TS - Interfacecable 5m
with LCD-display
9350.10M MPI+PPI+HMI+TS - Interfacecable 10m
with LCD-display
9350.15M MPI+PPI+HMI+TS - Interfacecable 15m
with LCD-display
variant:
Art. ID.
name
price
9350-M MPI+PPI-Interfacecable TS-version 2m
9-pin modem plug
accessories:
Art. ID.
name
S7 - interface cables
9350-TS
Adapter cable 9pins to modem
for TS-function
9350-9-CHP
CheapConn Busconnector
for PROFIBUS
9391-HH
DIN-rail-holder for MPI/PPI
quick and easy assembling on the cap rail
9352-104
MPI-PC104-card 1 channel up to 12Mbaud
equates to PC104-standard (90.2 x 95.9mm)
9352-104-2
MPI-PC104-card 2 channel up to 12Mbaud
equates to PC104-standard (90.2 x 95.9mm)
9350-4
Power-adapter for MPI-cable
with power-supply unit 100-240VAC
9350-4-ON
Power-adapter for MPI-cable
without power-supply unit
9350-9-CHP-CC Option CheapConn for MPI
9350-9-CHP+9350-9-CHP-K already mounted
9361-7
T-Connector to PPI / MPI-Bus
doubling of PPI/MPI/Profibus-port without bus connector
9350-9-CHP-K
Connecting cable MPIx to CheapConn
9-pins 1 : 1 plated-through with shield
9350-WAND
Wall-mounting
for MPI/PPI + MPI-II + MPI-USB
S7-Interface cable for PPI, MPI, Profibus, TS, HMI <=> USB, RS232 applications
automatic protocol- and baud rate detection
firmwareupdate via internet for free
PPI - adapter for S7 - 200
MPI - adapter for S7 - 300 + 400
CE/EMC compliant construction
applicable with original Siemens programming software by included software
integrated display for output of diagnostic informations
power supply from the S7-PLC or external
applicable as TS/HMI adapter
USB-connector
double-sided connected cable
short plug to PLC
Technical Specifications:
32
Supply voltage:
24V/DC +/- 20%
Power consumption:
2,5 watt
Display:
double lined LCD-display
Handling/Configuration:
Kabelmanager-Software
keypad on the back
Interfaces:
to the PLC:
PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
to the PD/PC:
RS232: 9,6 KBd - 115,2 KBd
USB 1.1 for cable type A <-> A
Galvanic separation:
1000V PPI/MPI/Profibus to the PC
Operating temperature:
5 - 55°C
Case:
ABS-plastic case
Dimensions:
146 x 41 x 29 mm
price
Remote maintenance with TS-software without original TS-adaptor
With the MPI-II-cable you have the ability to access a connected
SPC-PLC S7-200 (PPI 9600 Baud, 19200 Baud and also 187500 Baud)
as well as S7-300/400 (MPI/Profbus 9600 Baud up to 12 MBaud) via PC
serial with up to 115200 Baud or via USB-port for reading respectively
writing of data.
You have to reach urgend your PLC via remote maintenance and have no
TS-adaptor in your company? No problem, configure with the
MPI-Kabelmanager your S7-interface-cable MPI-II-Kabel the mode "TS"
for "remote maintenance", connect this cable with the TS-Adapter (article
number 9350-TS) with a standard modem and send it all to your client.
Now you will be able to start the connection with your TS-sofware and
solve the problem. And this all without buying a original TS-adapter.
Visualisation of your S7-PLC via COM-Port
Coupling of S5-PLC with S7-PLC via PD-interfaces
Your panel provides a serial port and no MPI/Profibus for connecting a
S7-PLC. Connect the MPI-II-cable with it and you’re Online with your
panel.
You still have an installation in your machinery which is equiped with a
S5-PLC and the modification to S7 isn’t profitable, but the central control
needs the manufacturing data? No problem, connect the S5-PLC via the
S5toMPI to your central control and the S5toMPI ensures that the data will
be accordingly interchanged. Both sides can be active, but also only one.
Both is configurable.
article:
Art. ID.
9352
name
price
MPI-II - Interfacecable 3m
PPI/MPI/Profibus up to 12Mbit/s
9352.05M MPI-II - Interfacecable 5m
PPI/MPI/Profibus up to 12Mbit/s
9352.10M MPI-II - Interfacecable 10m
PPI/MPI/Profibus up to 12Mbit/s
9352.15M MPI-II - Interfacecable 15m
PPI/MPI/Profibus up to 12Mbit/s
S7 - interface cables
Programming of the S7- PLC via RS232 and USB
accessories:
Art. ID.
name
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9350-TS
Adapter cable 9pins to modem
for TS-function
9350-9-CHP
CheapConn Busconnector
for PROFIBUS
9391-HH
DIN-rail-holder for MPI/PPI
quick and easy assembling on the cap rail
9352-104
MPI-PC104-card 1 channel up to 12Mbaud
equates to PC104-standard (90.2 x 95.9mm)
9352-104-2
MPI-PC104-card 2 channel up to 12Mbaud
equates to PC104-standard (90.2 x 95.9mm)
price
9350-9-CHP-CC Option CheapConn for MPI
9350-9-CHP+9350-9-CHP-K already mounted
9352-24
Power connector 2pins small
cable coupling by screw-connector (small)
9361-7
T-Connector to PPI / MPI-Bus
doubling of PPI/MPI/Profibus-port without bus connector
9352.1
USB-cable plug/plug Type A-A 3m
USB 1.1 / 2.0 up to 480 MBit
9350-9-CHP-K
Connecting cable MPIx to CheapConn
9-pins 1 : 1 plated-through with shield
9350-WAND
Wall-mounting
for MPI/PPI + MPI-II + MPI-USB
33
smallest USB-gateway for PPI, MPI, Profibus, HMI <=> USB applications
automatic protocol- and baud rate detection
firmwareupdate via internet for free
PPI - adapter for S7 - 200
MPI - adapter for S7 - 300 + 400
CE/EMC compliant construction
applicable with original Siemens programming software by included software
with full PD – diagnosis socket
power supply from the USB-jack
Technical Specifications:
Supply voltage:
5V/DC
Power consumption:
2 watt
Display:
2 status-LEDs
Handling/Configuration:
Kabelmanager-Software
Interfaces:
to the PLC:
PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
to the PD/PC:
PD/diagnosis jack
Mini-USB-B-Buchse
Galvanic separation:
1000V PPI/MPI/Profibus to the PC
Operating temperature:
5 - 55°C
Case:
ABS-plastic case
Dimensions:
65 x 43 x 17 mm
Access to MPI/Profibus without power supply
S7 - interface cables
Your’re right in the middle of your production line and are standing in front
of a passive assembly just like a switcher or a ET200, in that case you
won’t be able to go Online without an external power supply of your
programming adapter, unless you’re using the S7USB. This module is
supplied completely from the USB-interface.
article:
Art. ID.
name
price
9352-S7-USB S7-USB
universal USB-module on PPI/MPI/Profibus 9,6 Kbit/s up to 12MBit/s
accessories:
Art. ID.
9352.3 USB-cable plug/plug Type A-B-Mini 3m
USB 1.1 / 2.0 up to 480 MBit
34
name
price
S7-Interface cable for PPI, MPI, Profibus, HMI <=> USB applications
automatic protocol- and baud rate detection
firmwareupdate via internet for free
PPI - adapter for S7 - 200
MPI - adapter for S7 - 300 + 400
CE/EMC compliant construction
applicable with original Siemens programming software by included software
power-supply from USB
double-sided connected cable
short plug to PLC
Supply voltage:
5V/DC
Power consumption:
2 watt
Display:
double lined LCD-display
Handling/Configuration:
Kabelmanager-Software
keypad on the back
Interfaces:
to the PLC:
PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
to the PD/PC:
USB 1.1 cable type A
Galvanic separation:
1000V PPI/MPI/Profibus to the PC
Operating temperature:
5 - 55°C
Case:
ABS-plastic case
Dimensions:
146 x 41 x 29 mm
Access to MPI/Profibus without power supply
Your’re right in the middle of your production line and are standing in front
of a passive assembly just like a switcher or a ET200, in that case you
won’t be able to go Online without an external power supply of your
programming adapter, unless you’re using the MPI-USB. This cable is
supplied completely from the USB-interface.
article:
Art. ID.
9352-USB
name
price
MPI-USB-cable 3m
PPI/MPI/Profibus up to 12Mbit/s
S7 - interface cables
Technical Specifications:
9352-USB.05M MPI-USB-cable 5m
PPI/MPI/Profibus up to 12Mbit/s
accessories:
Art. ID.
name
9350-9-CHP
CheapConn Busconnector
for PROFIBUS
9391-HH
DIN-rail-holder for MPI/PPI
quick and easy assembling on the cap rail
9352-104
MPI-PC104-card 1 channel up to 12Mbaud
equates to PC104-standard (90.2 x 95.9mm)
9352-104-2
MPI-PC104-card 2 channel up to 12Mbaud
equates to PC104-standard (90.2 x 95.9mm)
price
9350-9-CHP-CC Option CheapConn for MPI
9350-9-CHP+9350-9-CHP-K already mounted
9361-7
T-Connector to PPI / MPI-Bus
doubling of PPI/MPI/Profibus-port without bus connector
9350-9-CHP-K
Connecting cable MPIx to CheapConn
9-pins 1 : 1 plated-through with shield
9350-WAND
Wall-mounting
for MPI/PPI + MPI-II + MPI-USB
35
S7-Interface cable for PPI, MPI, Profibus, HMI <=> LAN applications
automatic protocol- and baud rate detection
firmwareupdate via internet for free
PPI - adapter for S7 - 200
MPI - adapter for S7 - 300 + 400
CE/EMC compliant construction
applicable with original Siemens programming software by included software
power supply from the S7-PLC or external
network configuration free adjustable
VPN remote maintenance possible / for the maintenance of the PLC via Internet
integrated display for output of diagnostic informations
double-sided connected cable
short plug to PLC
Technical Specifications:
S7 - interface cables
Supply voltage:
24V/DC +/- 20%
Power consumption:
2,5 watt
Display:
double lined LCD-display
Handling/Configuration:
Kabelmanager-Software
keypad on the back
Interfaces:
to the PLC:
PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
to the PD/PC:
10/100MBit ethernet interface
Galvanic separation:
1500V PPI/MPI/Profibus to the PC
Operating temperature:
5 - 55°C
Case:
ABS-plastic case
Dimensions:
146 x 41 x 29 mm
Programming of S7-PLCs via LAN
Watching of S7-PLC-devices via LAN without Ethernet-CP
You would like to respond to your S7-PLC-device via LAN but not Your panel only has a LAN-socket as PLC-interface? No problem,
integrate an Ethernet-CP? No problem, plug the S7-LAN or also the connect this socket with the S7-LAN or the MPI-LAN-cable and plug it
directly on the PPI/MPI/Profibus of the PLC. Then access to the variables
MPI-LAN-cable on the MPI/PPI/Profibus-interface and access via LAN.
and data of the PLC is already available.
S7-CP-replacement (without LAN-CP to the PLC-device)
Remote maintenance / telecontrol of PLC-devices via LAN /
internet
Do you have a S7-PLC-device without CP243-1, CP343-1 or CP443-1 You have access to a on-site network and your PLC-device has no
and would like to connect via LAN? Then plug the S7-LAN on the LAN-connection? No problem, plug the S7-LAN on the PLC-device and
PLC-device and your access via RFC1006 is ready for use.
you will have immediate access to the PLC from afar.
Without LAN-cable round of the PLC
36
Transformation of Rack/Slot in TSAP to MPI-address
Your’re right in the middle of your production line and and should move
around the machine and simultaneously observe / manage. No problem,
you parameterize the S7-WLAN-Bridge, connect to the MPI-LAN and Your panel or visualisationsystem addresses the used PLC with
connect to an access-point or with the ad-hoc-network of your laptop and Rack/Slot in TSAP? No problem, activate this mode in the
MPI-LAN-cable and you will get actual data from the PLC.
are ONLINE on the PLC.
PLC-coupling (data exchange between PLC-devices)
Actual time for the PLC?
Your pumping stations report the water levels of the central control via
telephone network. The central office itself can of course transmit
commands/messages to the substations as well. Thereto no dedicated
line is required, it’s sufficient when the stations connect via network
You need in your PLC a actual time? No problem, with the NTP-option the
(DSL-router).
MPI-LAN-cable get from a NTP-(Time-)Server the actual time and
transfers it direct into the configured PLC or for processing in a DB.
Variable-chart without Step7-programming package
Malfunctions on the Bus although everything is (apparently)
connected properly?
article:
Art. ID.
name
price
9352-LAN MPI-LAN-cable 3m
PPI/MPI/Profibus up to 12Mbit/s
options:
Art. ID.
name
9352.NTP-Server
Option "NTP-Server for S7-PLC"
transfer of time from NTP-server into S7-PLC
9352-VAST
Option "Variable Control"
variables view in web browser
price
9352-WATCHDOG Option Watchdog
controlling of the connected MPI-/Profibus with webbrowser or over port
accessories:
Art. ID.
name
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9350-9-CHP
CheapConn Busconnector
for PROFIBUS
9391-HH
DIN-rail-holder for MPI/PPI
quick and easy assembling on the cap rail
9352-104
MPI-PC104-card 1 channel up to 12Mbaud
equates to PC104-standard (90.2 x 95.9mm)
9352-104-2
MPI-PC104-card 2 channel up to 12Mbaud
equates to PC104-standard (90.2 x 95.9mm)
S7 - interface cables
The S7-LAN can also be used for controlling/checking the MPI/Profibus. It
will be plugged on the Bus so that you can take a look at the status of the
You would like to give your customer the opportunity to read current
busses via software on PC, for example the numbers of parity errors.
numbers of the manufacturing Online, without installing a visualisation or
even the STEP7-package? Then a S7-LAN with the option „Status
Variable“ is needed, and your customer can take a look at these
password protected data on a site of the integrated webserver.
price
9350-9-CHP-CC Option CheapConn for MPI
9350-9-CHP+9350-9-CHP-K already mounted
9352-24
Power connector 2pins small
cable coupling by screw-connector (small)
9361-7
T-Connector to PPI / MPI-Bus
doubling of PPI/MPI/Profibus-port without bus connector
9350-9-CHP-K
Connecting cable MPIx to CheapConn
9-pins 1 : 1 plated-through with shield
9350-WAND
Wall-mounting
for MPI/PPI + MPI-II + MPI-USB
37
With each interface of your PC to the S5-PLC
multifunctional, several functions in one product
well-priced alternative to high-priced original products
application table:
PG-UNI + PG-UNI-II
S5-LAN++
PG-USB
PG-COM
PG-ISO-SET
x
x
x
at 944 + 9359-8
x
x
+ext. 24V
+ext. 24V
+ext. 24V(2)
at 944 + 9359-8 + ext. 24V (4)
x
x
+9359-5-150 + 9359-4
+ ext. 24V (3)
+9359-5-150 + 9359-4
+ ext. 24V (3)
+9359-5-150 + 9359-4
+ ext. 24V (3)
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
device type
S5-90U
S5-95U
S5-100U
S5-115U
S5-135U
S5-155U
S5-AG110S
+9359-5-150 + 9359-4
S5-AG130W/B
+9359-5-150 + 9359-4
S5-AG150A/K/S/U
+9359-5-150 + 9359-4
Speichermodule
/cables
Prommer
S5
S5- -interface
Interfacekabel
CP-143
CP-521
CP-523
CP-525
CP-526
CP-527
CP-528
CP-544
CP-5430
CP-5431
IP-252
IP-247
IP-252
IP-266
WF-470
SIN-805
SIN-820
SIN-840
SIN-850
SIN-880
max.
prolongation:
x
+CP521 adapter
+CP523 adapter
+9359-5
x
x
x
x
x
x
x
x
x
+9359-4
+9359-4 +
9359-5-WF470
+9359-6
+9359-6
+9359-6
+9359-6
+9359-6
300m (UNI-extension)
+9359-5-150-USB
+9359-5-150 + 9359-4(1)
+9359-5-150-USB
+9359-5-150 + 9359-4(1)
+9359-5-150-USB
+9359-5-150 + 9359-4(1)
x
x
+CP521 adapter(1)
+CP523 adapter(1)
+9359-5(1)
x
x
x
x
x
+9359-USB
x
x
x
x
x
x
x
x
x
+9359-5-WF470-USB
+9359-6 + ext. 24V(5)
+9359-6 + ext. 24V(5)
+9359-6 + ext. 24V(5)
+9359-6 + ext. 24V(5)
+9359-6 + ext. 24V(5)
300m (S5-LAN-extension) +ext.
24V
+9359-6-USB
+9359-6-USB
+9359-6-USB
+9359-6-USB
+9359-6-USB
100m (PG-USBextension)
(1) ISO adapter can not be used because the required supply voltage on the PG interface of the module is not present.
(2) At the CPU 6ES5 102-8MA02 Release 3 is a PG-ISO-Adapter or Netz-Adapter additional required.
(3) With S5-LAN++ HW V2.3 the "Netz-Adapter" is no more needed, this version has included current-sources.
(4) With S5-LAN++ HW V2.3 no accessories are needed, this version has included current-sources.
(5) With S5-LAN++ HW V2.3 a Sinum-Adapter with special pinning is needed.
Industrial Ethernet - TCP/IP for all SIMATIC-S5 via the programming-interface
38
56
52
fastest installation to the network of every SIMATIC - S5
reading and writing of S5-data (E,A,M,DB,Z,T) via TCP/IP
ideal for process-visualisation
programming with STEP 5 via Ethernet
simultaneous programming and visualisation possible (integrated multiplexer function)
power supply from the S5-PLC or external
disclosed TCP/IP-protocol
DHCP / Auto-IP supported
timing-equitable communication with the S5-PLC via integrated firmware
driver-DLL for Windows available, EXCEL and WORD can read/write S5-data
compatible with VIPA-S5-TCP/IP driver
direct operation with WinCC via TCP/IP driver S5 Layer4 possible
with WinCC Flexible (e.g. MP377, TP177B) via S7-TCP/IP to the Simatic S5 (CP-343-1 compatible)
data exchange between S5 – S5 and S5 - S7 via TCP/IP
RK 512 and TCP/IP H1-ISO-On-TCP RFC1006 (CP1430 TCP) supported
versions: 3964R-LAN, ASCII-LAN, PG-LAN, as RS232-version and for the MUX757
x
x
x
+9359-4(1)
+9359-5-WF470 +
9359-4(1)
+9359-6(1)
+9359-6(1)
+9359-6(1)
+9359-6(1)
+9359-6(1)
300m (UNI-extension)
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
2 watt
Display:
status-LED
Handling/Configuration:
reset-switch-key (factory setting)
S5-LAN Manager
Interfaces:
to the PLC:
TTY/20mA current loop (S5-LAN passiv, PLC aktiv)
to the PD/PC:
10/100BaseTX RJ45-ethernet jack
Operating temperature:
5 - 55°C
Case:
ABS-plastic case
Dimensions:
42 x 15 x 65 mm
Programming of S5-PLC’s via LAN
Communication with Win98 – XP/Vista via LAN to S5-PLC
Watching of S5-PLC’s via LAN without Ethernet-CP
Watching of S5- PLC’s with panel for S7-PLC
Your panel only has a LAN-socket as PLC-interface and supports only
S7-RFC1006, no problem. Connect this socket with the S5-LAN++ and
plug it directly on the PD-interface of the PLC. The S5-LAN++ performs
adverse your panel as a S7-PLC although you receive the data from the
Your panel only has a LAN-socket as PLC-interface, no problem. Connect S5-PLC. Then access to the variables and data of the S5-PLC is already
this socket with the S5-LAN++ and plug it directly on the PD-interface of available.
the PLC. Then access to the variables and data of the PLC is already
available.
Remote maintenance of your S5-PLC via LAN / Internet
PLC coupling (data exchange between PLC’s)
S5 - interface cables
You would like to respond to your S5-PLC via LAN, but not integrate an
Ethernet-CP? No problem, plug the S5-LAN++ on the PD-interface and You still have a PC with Win98 and a MS-DOS-based Step5-package
access via LAN.
and would like to go Online on your S5-PLC via LAN? No problem, the
provided virtual Com-Port PLCVCom emulates a COM-port on your PC
with which you go Online. Even your MS-DOS-based Step5-software on
this WIN98-PC can use this virtual Com-Port. With a patchtool for the
Siemens Step5-software, which is provided as well, nothing else stands
in your way to communicate via LAN.
You have access to a on-site network and your PLC has no
LAN-connection? No problem, plug the S5-LAN on the PLC and you will
have immediate access to the PLC from afar.
Your pumping stations report the water levels of the central control via
telephone network. The central office itself can of course transmit
commands/messages to the substations as well. Therefore no dedicated
line is required, it’s sufficient when the stations connect via network
(DSL-router).
Visualisation via 3964R-interface without using the protocol itself
Extension of a 3964R-line via LAN
There is a control with CP524 in your outstation and the communication
partner of the CP has moved locally. Connecting path is a LAN-network.
Your visualisation-software does not support a 3964R-protocol, but you So each of both participants gets a 3964R-LAN and after input of the
have to apply this package? No problem, connect the 3964R-LAN to your partner’s IP-address a coupling via LAN will be configured.
CP and activate the RFC1006-emulation in the module. Now your
software gets the data from the module via RFC1006, which in turn
communicates with the assembly via 3964R.
39
article:
Art. ID.
name
price
9359-LAN S5-LAN++
Industrial Ethernet <=> S5 PD-interface (TTY)
variant:
Art. ID.
name
9359-RK
S5-3964R-LAN
Industrial Ethernet <=> 3964R-protocol (TTY)
9359-RK-RS
S5-3964R-LAN RS232-version
Industrial Ethernet <=> 3964R-protocol, inclusive adapter cable (15pin female <=> 9pin male)
9359-ASCII
S5-ASCII-LAN
sends ASCII-data via Industrial Ethernet
price
9359-LAN-RS S5-LAN++ RS232-version
Industrial Ethernet <=> S5 PD-interface (RS232), inclusive adapter cable (15pin female <=> 9pin male)
9359-LAN-M S5-LAN-MUX757
S5-LAN with path selection (MUX757)
9359-PG-LAN S5-PG-LAN
RS232-complement to S5-LAN++ (TTY/RS232)
accessories:
Art. ID.
name
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9359-5-150
AG-150-adapter
for PG-UNI + PG-UNI-II-cable to AG-150
9636-CROSS Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning
S5 - interface cables
40
9359-4
NETZ-adapter
for PG-UNI-cable /UNI-II-cable/S5-LAN
9636-TCPIP
Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1
9359-8
PG-ISO-adapter
1000V galv. seperation
9359-6
SINUM-adapter
for PG-UNI + PG-UNI-II-cable to SINUMERIK
9352-24
Power connector 2pins small
cable coupling by screw-connector (small)
price
Coupling of PC (USB-port type A) with the 15pin X4/X5 PD-port of the PLC
complete electronics in the plug housing
slide lock for firm grip on the PLC
power supply from the USB-port
prolongable up to 100m on the PLC side
runs with the standard S5-software despite virtual com-port (driver for Win2000, XP, Vista and Windows7 will be provided)
Technical Specifications:
Supply voltage:
5V/DC
Power consumption:
0,3 watt
Display:
2 status-LEDs for RXT/TXD
Interfaces:
to the PLC:
TTY/20mA current loop (PG-USB aktiv, PLC passiv)
to the PD/PC:
USB 1.1 cable type A
Operating temperature:
5 - 55°C
Case:
metal case
Dimensions:
50 x 40 x 17 mm
You have to program an assembly which does not provide neither power
sources nor voltages at your PD-interface, such as the AS511-card for
example? No problem, the PG-USB-cable supplies itself completely from
the USB-port and so it’s active adverse the communication partner. He
uses own power sources for the communication.
You still have a PC with Win98 and Step5-package and would like to go
Online on your S5-PLC via USB? No problem, the provided virtual
Com-Port PLCVCom emulates a COM-port on your PC with which you
go Online. With a patchtool for the Siemens Step5-software, which is
provided as well, nothing else stands in your way to communicate via
LAN.
article:
Art. ID.
9359-1
name
price
PG-USB-cable 3m
9359-1.05M PG-USB-cable 5m
accessories:
Art. ID.
name
9359-5-150-USB
PG-USB AG-150-adapter
for PG-USB-cable to AG-150
9359-5-USB
PG-USB CP-525-adapter
for PG-USB-cable to CP-525
9359-5K-USB
PG-USB CP-525-K-adapter
for PG-USB-cable to CP-525-communication
9359-6-USB
PG-USB SINUM-adapter
for PG-USB-cable to SINUMERIK
price
S5 - interface cables
Communication with Win98 – XP/Vista via USB to S5-PLC
Active on every S5-PLC
9359-5-WF470-USB PG-USB WF-470-adapter
for PG-USB-cable to WF470
9359-7-USB
PG-USB-lengthening set
complete mounting set
41
Connects the S5-PLC with a S7-PLC
bi-directional exchange of data blocks
automatic protocol- and baud rate detection
power supply from the S7-PLC or external
galvanic separation 1000V
double-sided connected cable
short plug to PLC
firmwareupdate via internet for free
easy handling without programming the S5/S7
incl. 9 pol. adapter for connecting a S5-interface cable
optional is a PG-COM or PG-UNI cable necessary
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
2,5 watt
Display:
double lined LCD-display
Handling/Configuration:
Kabelmanager-Software
keypad on the back
Interfaces:
to the PLC:
PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
to the PD/PC:
RS232: 9,6 KBd - 115,2 KBd
USB 1.1 for cable type A <-> A
Operating temperature:
5 - 55°C
Case:
ABS-plastic case
Dimensions:
146 x 41 x 29 mm
S5 - interface cables
Coupling of S5-PLC with S7-PLC via PD-interfaces
You still have an installation in your machinery which is equiped with a
S5-PLC and the modification to S7 isn’t profitable, but the central control
needs the manufacturing data? No problem, connect the S5-PLC via the
S5toMPI to your central control and the S5toMPI ensures that the data will
be accordingly interchanged. Both sides can be active, but also only one.
Both is configurable.
article:
Art. ID.
name
price
9352-S5-OP S5toMPI/Profibus
DB-exchange from S5 to S7 over the PD-ports
accessories:
Art. ID.
name
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9350-9-CHP
CheapConn Busconnector
for PROFIBUS
9391-HH
DIN-rail-holder for MPI/PPI
quick and easy assembling on the cap rail
price
9350-9-CHP-CC Option CheapConn for MPI
9350-9-CHP+9350-9-CHP-K already mounted
9352-24
Power connector 2pins small
cable coupling by screw-connector (small)
9350-9-CHP-K
Connecting cable MPIx to CheapConn
9-pins 1 : 1 plated-through with shield
9350-WAND
Wall-mounting
for MPI/PPI + MPI-II + MPI-USB
appropriate interface-cables:
Art. ID.
42
name
9359.10CM
PG-COM-cable 0.1m special length
PC 9pins COM-port <=> PLC 15pins X4/X5 port
9359
PG-COM-cable 3m
PC 9pins COM-port <=> PLC 15pins X4/X5 port
9359.05M
PG-COM-cable 5m
PC 9pins COM-port <=> PLC 15pins X4/X5 port
price
appropriate interface-cables:
Art. ID.
name
9359.10M
PG-COM-cable 10m
PC 9pins COM-port <=> PLC 15pins X4/X5 port
9359.15M
PG-COM-cable 15m
PC 9pins COM-port <=> PLC 15pins X4/X5 port
9359-2
PG-UNI-II-cable 3m
for PLC's/CP's+ LED + metal case
9359-2.05M
PG-UNI-II-cable 5m
for PLC's/CP's+ LED + metal case
9359-2.10M
PG-UNI-II-cable 10m
for PLC's/CP's+ LED + metal case
price
9359-3.10CM PG-UNI-cable 0.1m special length
for PLC's and CP's
9359-3
PG-UNI-cable 3m
for PLC's and CP's
9359-3.05M
PG-UNI-cable 5m
for PLC's and CP's
9359-3.10M
PG-UNI-cable 10m
for PLC's and CP's
Speichermodule
Schnittstellen-Multiplexer
Prommer
S5 - interface/cables
Couples the PC (9 pol. COM-interface) with the 15 pol. X4/X5 interface port of the PLC
complete electronics in the plug housing
slide lock for firm grip on the PLC
supply from the PLC over the 5V DC of the PD-port
Technical Specifications:
Supply voltage:
5V/DC
Power consumption:
0,2 watt
Display:
-
Interfaces:
to the PLC:
TTY/20mA current loop (PG-COM passiv, PLC aktiv)
to the PD/PC:
RS232: 9,6 KBd - 115,2 KBd
Operating temperature:
5 - 55°C
Case:
plastic case
Dimensions:
47 x 40 x 15 mm
Serial communication to the S5-PLC (CPU-assemblies 15pin)
You have a PC with programming software and a 9pin COM-port as
interface? No problem, for this purpose the PG-COM-cable is exactly the
right product. Connect it to PLC and PC and you’re Online.
article:
Art. ID.
name
price
9359.10CM PG-COM-cable 0.1m special length
PC 9pins COM-port <=> PLC 15pins X4/X5 port
9359
PG-COM-cable 3m
PC 9pins COM-port <=> PLC 15pins X4/X5 port
9359.05M
PG-COM-cable 5m
PC 9pins COM-port <=> PLC 15pins X4/X5 port
9359.10M
PG-COM-cable 10m
PC 9pins COM-port <=> PLC 15pins X4/X5 port
9359.15M
PG-COM-cable 15m
PC 9pins COM-port <=> PLC 15pins X4/X5 port
variant:
Art. ID.
name
price
9359-SON Additional charge for special wiring
PG-COM/ PG-UNI/ PG-UNI-II
9390
Additional charge for special length
for S5-Interface cables per Meter 3,- Euro
9359.X
Special length: PG-COM-cable (3m) + 9390
PC 9pins COM-port <=> PLC 15pins X4/X5 port
43
Couples the PC (9 pol. COM-interface) with the 15 pol. X4/X5 interface port of the PLC
complete electronics in the plug housing
slide lock for firm grip on the PLC
supply from the PLC of 20mA-current sources
galvanic separation to 1000V with PG-ISO-adapter
prolongable up to 300 meters on PLC side
functioned also at many CP’s, IP’s and Sinumerik-PLC’s
Technical Specifications:
Supply voltage:
from the current sources of the PLC
Power consumption:
0,2 watt
Display:
-
Interfaces:
to the PLC:
TTY/20mA current loop (PG-COM passiv, PLC aktiv)
to the PD/PC:
RS232: 9,6 KBd - 115,2 KBd
Operating temperature:
5 - 55°C
Case:
plastic case
Dimensions:
47 x 40 x 15 mm
Serial communication to the S5-PLC
Serial communication with CP and more S5-assemblies
S5 - interface cables
You have a PC with programming software and a 9pin COM-port as
interface? No problem, for this purpose the PG-UNI-cable is exactly the
right product. Connect it to PLC and PC and you’re Online. Even the
25pin interface of the AS511-card is no problem. You need the
NETZ-adapter and also the AG-150-adapter and then this control is
programmable, too.
You have a PC with programming software and a 9pin COM-port as
interface? No problem, for this purpose the PG-UNI-cable is exactly the
right product. Connect it to a Siemens assembly such as H1-CP
(CP1430), WF470 and PC or CP-525 with the CP525-adapter and PC
and you’re Online.
article:
Art. ID.
name
price
9359-3.10CM PG-UNI-cable 0.1m special length
for PLC's and CP's
9359-3
PG-UNI-cable 3m
for PLC's and CP's
9359-3.05M
PG-UNI-cable 5m
for PLC's and CP's
9359-3.10M
PG-UNI-cable 10m
for PLC's and CP's
variant:
Art. ID.
name
price
9359-SON Additional charge for special wiring
PG-COM/ PG-UNI/ PG-UNI-II
9390
Additional charge for special length
for S5-Interface cables per Meter 3,- Euro
9359-3.X
Special length: PG-UNI-cable (3m) + 9390
for PLC/CP/IP - connection
accessories:
Art. ID.
44
name
9359-9.M
Adapter COM 1 : COM2
25pins (male) - 9pins (female)
9359-9
Adapter COM 1 : COM2
9pins (male) - 25pins (female)
9359-5-150
AG-150-adapter
for PG-UNI + PG-UNI-II-cable to AG-150
price
accessories:
Art. ID.
name
9359-5
CP-525-adapter
for PG-UNI + PG-UNI-II-cable <-> CP-525
9359-5K
CP-525-K-adapter
for PG-UNI + PG-UNI-II-cable <-> CP-525-communication
9359-4
NETZ-adapter
for PG-UNI-cable /UNI-II-cable/S5-LAN
9359-8
PG-ISO-adapter
1000V galv. seperation
9359-7
PG-UNI - lengthening set
price
9359-MAX233 RS232 / V24 chip
for interfacecable
9359-6
SINUM-adapter
for PG-UNI + PG-UNI-II-cable to SINUMERIK
9359-5-WF470WF-470-adapter
for PG-UNI + PG-UNI-II-cable to WF470
9310
Additional charge 25-pins PC-plug
special construction of the RS232-side
Couples the PC (9 pol. COM-interface) with the 15 pol. X4/X5 interface port of the PLC
S5 - interface cables
complete electronics in the plug housing
slide lock for firm grip on the PLC
supply from the PLC of 20mA-current sources
galvanic separation to 1000V with PG-ISO-adapter
prolongable up to 300 meters on PLC side
functioned also at many CP’s, IP’s and Sinumerik-PLC’s
ESD firm transducer component up to 15kV
Display of RxD/TxD with LEDs
Technical Specifications:
Supply voltage:
from the current sources of the PLC
Power consumption:
0,25 watt
Display:
2 status-LEDs for RXT/TXD
Interfaces:
to the PLC:
TTY/20mA current loop (PG-COM passiv, PLC aktiv)
to the PD/PC:
RS232: 9,6 KBd - 115,2 KBd
Operating temperature:
5 - 55°C
Case:
metal case
Dimensions:
50 x 40 x 17 mm
Insensible communication with the S5-PLC
Serial communication to the S5-PLC
You need a communication to a PLC-device, which is stable against
influence from out like frequency converter or electrostatic charge? No
problem, the PG-UNI-II-cable is the correct interface cable. Its metal
D-SUB-cases and esd-resistant components you will have here best
protection against this influences.
You have a PC with programming software and a 9pin COM-port as
interface? No problem, for this purpose the PG-UNI-II-cable is exactly the
right product. Connect it to PLC and PC and you’re Online. The
communication itself is visible by the both included LEDs. Even the 25pin
interface of the AS511-card is no problem. You need the NETZ-adapter
and also the AG-150-adapter and then this control is programmable, too.
45
Serial communication with CP and more S5-assemblies
You have a PC with programming software and a 9pin COM-port as
interface? No problem, for this purpose the PG-UNI-II-cable is exactly the
right product. Connect it to a Siemens assembly such as H1-CP
(CP1430), WF470 and PC or CP-525 with the CP525-adapter and PC
and you’re Online.
article:
Art. ID.
name
9359-2
price
PG-UNI-II-cable 3m
for PLC's/CP's+ LED + metal case
9359-2.05M PG-UNI-II-cable 5m
for PLC's/CP's+ LED + metal case
9359-2.10M PG-UNI-II-cable 10m
for PLC's/CP's+ LED + metal case
variant:
Art. ID.
name
S5 - interface cables
9390
Additional charge for special length
for S5-Interface cables per Meter 3,- Euro
9359-2.X
Special length: PG-UNI-II cable (3m) + 9390
for PLC/CP/IP + LED + metal case
accessories:
Art. ID.
name
9359-9.M
Adapter COM 1 : COM2
25pins (male) - 9pins (female)
9359-9
Adapter COM 1 : COM2
9pins (male) - 25pins (female)
9359-5-150
AG-150-adapter
for PG-UNI + PG-UNI-II-cable to AG-150
9359-5
CP-525-adapter
for PG-UNI + PG-UNI-II-cable <-> CP-525
9359-5K
CP-525-K-adapter
for PG-UNI + PG-UNI-II-cable <-> CP-525-communication
9359-4
NETZ-adapter
for PG-UNI-cable /UNI-II-cable/S5-LAN
9359-8
PG-ISO-adapter
1000V galv. seperation
9359-7-II
PG-UNI-II - lengthening set
9359-MAX233 RS232 / V24 chip
for interfacecable
9359-6
SINUM-adapter
for PG-UNI + PG-UNI-II-cable to SINUMERIK
9359-5-WF470WF-470-adapter
for PG-UNI + PG-UNI-II-cable to WF470
9310
46
price
9359-SON Additional charge for special wiring
PG-COM/ PG-UNI/ PG-UNI-II
Additional charge 25-pins PC-plug
special construction of the RS232-side
price
PLC-communication with 1000V galvanic separation without power supply
galvanic separation between PD/PC and PLC up to 1kV
contact-protected plastic housing
supply of the module from the PLC voltage 5V DC and/or 24V DC
the SET contains a PG-UNI-Kabel (3m) Art.Nr.9359-3 and a PG-ISO-Adapter Art.Nr.9359-8
slide lock for firm grip on the PLC
Technical Specifications:
Supply voltage:
5V/DV und/oder 24V/DC
Power consumption:
0,3 watt
Display:
-
Interfaces:
to the PLC:
TTY/20mA current loop (PG-COM passiv, PLC aktiv)
to the PD/PC:
RS232: 9,6 KBd - 115,2 KBd
Operating temperature:
5 - 55°C
Case:
plastic case
Dimensions:
PG-UNI: 47 x 40 x 15 mm / PG-ISO-Adapter: 50 x 45 x 15 mm
You have to configure a galavanic isolated connection to a S5-PLC? No
problem, connect the PG-ISO-set (PG-UNI-cable + PG-ISO-adapter) to
the PLC and PC, and now you’re Online connected to the PLC. And all
without earth-relation between PLC and PC.
article:
Art. ID.
9359-S
name
price
PG-ISO-SET 3m
Interface cable set with galvanic separation between PC and PLC up to 1000V
9359-S.05M PG-ISO-SET 5m
Interface cable set with galvanic separation between PC and PLC up to 1000V
9359-S.10M PG-ISO-SET 10m
Interface cable set with galvanic separation between PC and PLC up to 1000V
accessories:
Art. ID.
name
9359-9.M
Adapter COM 1 : COM2
25pins (male) - 9pins (female)
9359-9
Adapter COM 1 : COM2
9pins (male) - 25pins (female)
9359-5-150
AG-150-adapter
for PG-UNI + PG-UNI-II-cable to AG-150
9359-5
CP-525-adapter
for PG-UNI + PG-UNI-II-cable <-> CP-525
9359-5K
CP-525-K-adapter
for PG-UNI + PG-UNI-II-cable <-> CP-525-communication
9359-4
NETZ-adapter
for PG-UNI-cable /UNI-II-cable/S5-LAN
price
sonstiges
SPScables
Zubehör
Schnittstellen-Multiplexer
S5 - interface
Galvanic coupling to the S5-PLC (CPU-assemblies 15pin)
9359-MAX233 RS232 / V24 chip
for interfacecable
9359-6
SINUM-adapter
for PG-UNI + PG-UNI-II-cable to SINUMERIK
9359-5-WF470WF-470-adapter
for PG-UNI + PG-UNI-II-cable to WF470
9310
Additional charge 25-pins PC-plug
special construction of the RS232-side
65
47
61
Other useful devices to simplify your work with the PLC
Your advantage of use PI-interface cables:
extensive cable and adapter program
in our inventory is a extensive cable and adapter program available for you, even for special connections
we have a solution for you
simple handling
for most interconnections no external power is required
easy maintenance
our free technical hotline is available with help and advice for you
function reliability
each cable is manufactured and tested according to quality guidelines in Germany
function guarantee
each cable is tested with a special cable tester on all connections and connected to PLC to test online features
CE and EMV reliability
all cables are certified by effective directives
article:
Art. ID.
sonstiges
SPS Zubehör
Speichermodule
/cables
Prommer
Schnittstellen-Multiplexer
S5
S5- -interface
Interfacekabel
48
66
62
56
52
name
9359.1:1
1:1 cable 9pins D-SUB
D-SUB 9pins (male) <=> D-Sub 9pins (female), 1to1-assignment
9359.AF
monkey-swing
PD-interface CP <=> PD-interface PLC (needed with H1, L1 or L2-bus)
9359.AB
PLC-connecting cable
PC <-> Allen-Bradley
9359-90
CP-cable
connects PD-TTY-port of TP-I, TP-II with L1,H1,L2-CP, D-Sub 15pins (male) <=> D-Sub 15pins (male)
9636-CROSS Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning
9359.0
Null-modem-cable 9-pin D-SUB
D-SUB 9pins (female) <=> D-Sub 9pins (female), rotated assignment (null modem)
9359.OP
OP-Programming cable to PC 3m
serial progamming cable for panels; D-Sub 9pins (female) <=>15pins (male)
9636-TCPIP
Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1
9359.PCS
PCS-cable
for Lauer-operator units
9359-91
PG-685-cable 5m
replacement cable for PD-685 to S5-PLC, D-Sub 25pins (male) <=> D-Sub 15pins (male)
9359.7XX
PG-7XX-cable 5m
9359-MAX233 RS232 / V24 chip
for interfacecable
9359.M
SC-09 cable 3m for Mitsubishi
RS232 <-> RS485
9359-1-RS232 USB-Serial-converter cable 3m
USB <=> RS-232
9359-V24
V24-adapter
generates a PLC-V24-interface out of the PLC-TTY-interface, ideal for Tele-Link and S5-Diag
9380-9S
Connecting cable TELE-Book on Slot-PLC
from Siemens
price
All about memory modules and the corresponding programming devices
robust steel plate case (programming devices)
applicable for use as a desktop unit (programming device)
easy handling and therefore quick on-site operation
replacement for already discontinued original products
Memory-modules for SIMATIC® - S5&S7
Simple Handling
The programming number is identical with the Siemens programming number
Secure Handling
Each module has a label with its type and programming number
Reduced risk to use the wrong module by mistake
Module with 21 V = black written labels – modules with -12,5 V = red written labels
reliable and secure viability
Each module is produced and verified according to German Quality-Standards
Guarantied viability
Each module has to pass a PLC – write and read test
Guarantied Safeness through mark of conformity (CE) and electromagnetic compatibility mark (EMC)
All of our modules comply with the current regulations
article:
Art. ID.
name
375-8LC11
EEPROM module 2KByte for S90
not RoHs-compliant
375-8LC21
EEPROM module 8KByte for S90
not RoHs-compliant
375-OLC21
EEPROM module for S95-S115
2/4KByte - not RoHs-compliant
375-OLC41
EEPROM module for S95-S115
8/16KByte - not RoHs-compliant
375-OLC41X
EEPROM module for S95-S115
8/16KByte
with PLC-write protection - not RoHs-compliant
375-1LA15
EPROM module 8KByte for S95-S115
not RoHs-compliant
375-OLA15
EPROM module 8KByte for S95-S115
not RoHs-compliant
375-1LA21
EPROM module 16KByte for S95-S115
not RoHs-compliant
375-1LA41
EPROM module 32KByte for S95-S115
not RoHs-compliant
375-1LA61
EPROM module 64KByte for S95-S115
not RoHs-compliant
375-1LA71
EPROM module 128KByte for S95-S115
not RoHs-compliant
375-OLA21
EPROM module 16KByte for S95-S115
not RoHs-compliant
373-OAA41
EPROM module 16KWords for S135-S155
not RoHS-compliant
373-1AA41
EPROM module 16KWords for S135-S155
not RoHs-compliant
375-OLA41
EPROM module 32KByte for S95-S115
not RoHs-compliant
373-OAA61
EPROM module 32KWords for S135-S155
not RoHs-compliant
373-1AA61
EPROM module 32KWords for S135-S155
not RoHs-compliant
373-OAA81
EPROM module 64KWords for S135-S155
not RoHs-compliant
373-1AA81
EPROM module 64KWords for S135-S155
not RoHs-compliant
375-8LA11
EPROM module 8KByte for S90
not RoHs-compliant
376-1AA11
EPROM module short 12,5V 8KWords
for S135-S155 - not RoHs-compliant
376-1AA21
EPROM module short 12,5V 16KWords
for S135-S155 - not RoHs-compliant
price
Memory modules / Prommer
Your Advantages by using our PC memory modules:
49
article:
Art. ID.
name
376-1AA31
EPROM module short 12,5V 32KWords
for S135-S155 - not RoHs-compliant
376-OAA11
EPROM module short 21V 8KWords
for S135-S155 - not RoHs-compliant
376-OAA21
EPROM module short 21V 16KWords
for S135-S115 - not RoHs-compliant
376-OAA31
EPROM module short 21V 32KWords
for S135-S155 - not RoHs-compliant
375-8LA12
FLASH-EPROM 8KByte for S90
not RoHs-compliant
951-0KD00-0AA0 Flash memory card 16KByte for S7 short
not RoHs-compliant
951-0KE00-0AA0 Flash memory card 32KByte for S7 short
not RoHs-compliant
951-0KF00-0AA0 Flash memory card 64KByte for S7 short
not RoHs-compliant
952-0KF00-0AA0 Flash memory card 64KByte for S7-400 long
not RoHs-compliant
951-0KG00-0AA0 Flash memory card 128KByte for S7 short
not RoHs-compliant
Memory
Speichermodule
// Prommer
Prommer
S5 -modules
Interfacekabel
374-2KG21
Flash memory card 128KByte long
not RoHs-compliant
374-1KH21
Flash memory card 256KByte short
not RoHs-compliant
374-2FH21
Flash memory card 256KByte long
not RoHs-compliant
374-2KH21
Flash memory card 256KByte long
not RoHs-compliant
951-0KJ00-0AA0 Flash memory card 512KByte for S7 short
not RoHs-compliant
375-OLD11
RAM module 8KByte for S95-S115
not RoHs-compliant
375-OLD31
RAM modulel 32KByte for S95-S115
not RoHs-compliant
377-OAA11
RAM module short series 377 16KByte
for S135-S155 - not RoHs-compliant
377-OAA21
RAM module short series 377 32KByte
for S135-S155 - not RoHs-compliant
377-OAA32
RAM module short series 377 64KByte
for S135-S155 - not RoHs-compliant
377-OAA41
RAM module short series 377 128KByte
for S135-S155 - not RoHs-compliant
377-OAB21
RAM module long series 377 32KByte
for S135-S155 - not RoHs-compliant
377-OAB31
RAM module long series 377 64KByte
for S135-S155 - not RoHs-compliant
377-OAB41
RAM module long series 377 128KByte
for S135-S155 - not RoHs-compliant
programming device for S5 and S7-300/400 memory modules and Dual-In-Line
fast access via serial interface
all Siemens-S5-E(E)PROM memory modules can be read, written or deleted
are designed for rough industrial application
comfortable operation software for Win 95/98/ME/NT/2000/XP with direct Siemens file management
very universal memory programming device
spacious and robust service bags optionally available
connecting cable, memory module library and a user-friendly PC program included in delivery
50
56
52
price
Technical Specifications:
Supply voltage:
230V/AC 50-60Hz (115V/AC optional)
Power consumption:
30 watt
Display:
-
Handling/Configuration:
WinPrommer-Software
Interfaces:
to the PD/PC:
RS232 to any COM-Port
parallel port for centronics-interface
others:
S5-memory modules
S5-/S7-FlashCards
Dual-In-Line-memory devices
24V/DV-output for UVL3
Operating temperature:
5 - 45°C
Case:
powder coated metal case
Dimensions:
245 x 47 x 187 mm
article:
Art. ID.
name
9363-2
price
MULTI-PROMMER 230VAC
for S5/S7-Memory-modules
9363-2-US MULTI-PROMMER 115VAC
for S5/S7-Memory-modules
name
price
9359.1:1 1:1 cable 9pins D-SUB
D-SUB 9pins (male) <=> D-Sub 9pins (female), 1to1-assignment
9363-13 PLCC32-adapter
for MULTI-Prommer
9363-7
Servicebag
for MULTI-PROMMER
programming device for S5 memory modules
fast access via serial interface
all Siemens-S5-E(E)PROM memory modules can be read, written or deleted
are designed for rough industrial application
comfortable operation software for Win 95/98/ME/NT/2000/XP with direct Siemens file management
spacious and robust service bags optionally available
connecting cable, memory module library and a user-friendly PC program included in delivery
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
8,2 watt
Display:
3 status-LEDs
Handling/Configuration:
WinPrommer-Software
Interfaces:
to the PD/PC:
RS232 to any COM-Port (connected through)
others:
S5-memory modules
Operating temperature:
5 - 40°C
Case:
powder coated metal case
Dimensions:
80 x 45 x 130 mm
Memory modules / Prommer
accessories:
Art. ID.
article:
Art. ID.
name
price
9363-5 MINI-PROMMER III 24VDC
for S5 memory-modules
accessories:
Art. ID.
name
price
9359.1:1 1:1 cable 9pins D-SUB
D-SUB 9pins (male) <=> D-Sub 9pins (female), 1to1-assignment
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9363-6
Servicebag
MINI-PROMMER + FLASH-PROMMER
9371-24 Power connector 2pins big
connector plug lockable by jack with screws
51
programming device for S5 and S7 memory modules
quick access via serial interface
write, read, delete and compare
for FlashCards and MMC-Card
designed for harsh industrial use
comfortable operation construction Software for Win 95/98/ME/NT/2000/XP with direct Siemens file management
spacious and robust service bags available as an option
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
5 watt
Display:
LED for function and watchdog supervision
Handling/Configuration:
WinPrommer-Software
Interfaces:
to the PD/PC:
RS232 to any COM-Port
others:
S5-/S7-FlashCards
MMC-Cards (optional)
Operating temperature:
5 - 45°C
Case:
powder coated metal case
Dimensions:
130 x 80x 50mm
Memory
Speichermodule
// Prommer
Prommer
S5 -modules
Interfacekabel
article:
Art. ID.
9363-8
name
price
FLASH-PROMMER-II 24VDC
for Flashcards
9363-8-MMC FLASH-PROMMER-II-MMC 24VDC
for Flashcards + MMC
9363-8-USB FLASH-PROMMER-USB
accessories:
Art. ID.
name
price
9359.1:1 1:1 cable 9pins D-SUB
D-SUB 9pins (male) <=> D-Sub 9pins (female), 1to1-assignment
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9363-6
Servicebag
MINI-PROMMER + FLASH-PROMMER
9372-24 Power connector 3pins big
connector plug lockable by jack with screws
Erasing EPROM memory modules
reliable erasing of EPROM-modules with UV-light
erasing time adjustable up to 60min
are designed for rough industrial application
Technical Specifications:
Supply voltage:
230 V/AC 50-60Hz
Power consumption:
8 watt
Handling/Configuration:
turn switch for the time switch
Operating temperature:
5 - 40°C
Case:
anodised aluminium case
Dimensions:
90 x 80 x 240 mm
article:
Art. ID.
name
price
9363-3 EPROM-Eraser LG-07
230V Desktop Device with clock
accessories:
Art. ID.
52
56
9363-3-LAMPE Replacement lamp for LG-07
UV-tube with G23-plug
name
price
Erasing EPROM memory modules
reliable erasing of EPROM-modules with UV-light
erasing time adjustable up to 30min
are designed for rough industrial application
Technical Specifications:
Supply voltage:
24 V/DC +/- 20%
Power consumption:
8 watt
Handling/Configuration:
rotary switch for the clock timer
Operating temperature:
5 - 40°C
Case:
powder coated metal case
Dimensions:
85 x 50 x 160 mm
article:
Art. ID.
name
price
accessories:
Art. ID.
9391.1
name
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9363-4-LAMPE Replacement lamp for UVL3
UV-tube with G4T5-plug
price
Memory modules / Prommer
9363-3-B EPROM-Eraser UVL3
24V Miniature Device as cap
53
Interface-multiplexer for the Programming Device (PD) of the programmable logic controller (PLC)
You have to put an operating device or a text display into operation by connecting it to a PD-Interface?
Be prepared having to stick the plug into the device and out, over and over again!
The time has come to change that!
The PG-MUX makes it possible to operate simultaneously two devices at one PD-interface, regardless whether it
is a programming device, a text display, an operating device or any other kind of connections with a PD-interface
PG-MUX is an independent communications processor, which multiplexes the PD-interface in real time
By this method you can for example operate two programming devices “ONLINE” at the same time.
PD-Interface Multiplexer for professionally usage (active)
PD - interface - multiplexer
advanced version of the world widely used PG-MUX
all connectors and controls on the front
permanent checking of the device functions and power supply => restart at failure
right away ONLINE with both interfaces to the PLC
all PD functions can be accomplished parallel by 2 PD’s
possible PLC’s: S5-90, S5-95, S5-100-series, S5-115 (also CPU945), S5-135U-series and S5-155-series
no additional or specific adapters needed
connecting mechanics, pin assignment and the electrical data correspond to the PD/PLC-interfaces
capability of connecting on PD-side: 2 x AS511 (PD-protocol) / 1 x SINEC-L1-BUS / SIMATIC-S5 AG90...AG155
3m cable for AG-connection included in delivery
also available in the variants for AEG, Bosch, Klöckner-Moeller PS3/4 und Mitsubishi
Technical Specifications:
Supply voltage:
230V/AC +/- 15%, 50-60Hz
24V/DC +/- 20%
Power consumption:
4 watt
Display:
LED for function and watchdog supervision
Interfaces:
to the PLC:
TTY/20mA current loop (multiplexer aktiv, PLC passiv)
to the PD/PC:
2 PD x TTY/20mA current loop (multiplexer aktiv, 100 % mechanically and electr.
compatible)
Operating temperature:
5 - 55°C
Case:
powder coated metal case with mounting flange
Dimensions:
190 x 110 x 50 mm
PD-interface of the S5-PLC already occupied (service device)
Your PD-interface of the S5-PLC is already occupied with a panel and
you should accomplish program modifications without removing the
panel? No problem, connect the Multiplexer one-time to the PLC and then
connect the panel and also your PC to the Multiplexer. Now you can work
parallel with the PLC without the need of affecting the operation of the
panel. You can even work with 2 programming devices simultaneously, 2x
open the same component, only changes which are stored last will be
finally stored in the PLC. Also ideal for trainings purposes if PLC’s are
scare goods.
article:
Art. ID.
name
price
9361-5 PG-MUX-II for SIEMENS-S5
with PLC-specific connecting cable to PLC and power cable
variant:
Art. ID.
54
name
9361-11
PG-MUX-II for AEG A120 + A250
with PLC-specific connecting cable to PLC and power cable
9361-12
PG-MUX-II for BOSCH BUEP19 / +E
with PLC-specific connecting cable to PLC and power cable
price
variant:
Art. ID.
name
9361-13-PS3 PG-MUX-II for Klöckner-Möller for PS3
with PLC-specific connecting cable to PLC and power cable
price
9361-13-PS4 PG-MUX-II for Klöckner-Möller for PS4
with PLC-specific connecting cable to PLC and power cable
9361-14
PG-MUX-II for Mitsubishi FX + A-series
with PLC-specific connecting cable to PLC and power cable
9361-5-24V
PG-MUX-II for SIEMENS-S5 24V version
incl. connecting-cable to PLC
accessories:
Art. ID.
name
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9391-MT
Mounting set
for DIN-rail-holder
9361-3
S5-connecting cable 3m
forTELE-PROF, MINI-/PG-MUX-II
price
9361-3.05M S5-connecting cable 5m
for TELE-PROF, MINI-/PG-MUX-II
9361-3.06M S5-connecting cable 6m
for TELE-PROF, MINI-/PG-MUX-II
9361-6
Servicebag
for PG-MUX-II
9371-24
Power connector 2pins big
connector plug lockable by jack with screws
PD - interface - multiplexer
9361-3.10M S5-connecting cable 10m
for TELE-PROF, MINI-/PG-MUX-II
PD-Interface Multiplexer Lightversion (passive)
is the Light-version of PG-MUX-II because of it’s passive OP socket
as an alternative we offer also a DIN-Rail Version
all connectors and controls on the front
all PD functions can be accomplished parallel to a text display by one PD
possible PLC’s: S5-90, S5-95, S5-100-series, S5-115 (also CPU945), S5-135U-series and S5-155-series
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
3 watt
Display:
LED for function and watchdog supervision
Interfaces:
to the PLC:
TTY/20mA current loop (multiplexer aktiv, PLC passiv)
to the PD/PC:
PD TTY/20mA current loop (multiplexer aktiv, 100 % mechanically and electr. compatible)
OP TTY/20mA current loop (multiplexer passiv, restricted to control panel function)
Operating temperature:
5 - 55°C
Case:
metal case with mounting flange
Dimensions:
95 x 135 x 35 mm
PD-interface of the S5-PLC already occupied (OEM-device)
Your PD-interface of the S5-PLC is already occupied with a panel and
you should accomplish program modifications without removing the
panel? No problem, connect the Multiplexer one-time to the PLC and then
connect the panel and also your PC to the Multiplexer. Now you can work
parallel with the PLC without the need of affecting the operation of the
panel.
article:
Art. ID.
9361-1 MINI-MUX for S5 RK511 + L1
all cables optional
name
price
55
accessories:
Art. ID.
name
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9391-MT
Mounting set
for DIN-rail-holder
9361-3
S5-connecting cable 3m
forTELE-PROF, MINI-/PG-MUX-II
price
9361-3.05M S5-connecting cable 5m
for TELE-PROF, MINI-/PG-MUX-II
9361-3.06M S5-connecting cable 6m
for TELE-PROF, MINI-/PG-MUX-II
9361-3.10M S5-connecting cable 10m
for TELE-PROF, MINI-/PG-MUX-II
9361-6
Servicebag
for PG-MUX-II
9371-24
Power connector 2pins big
connector plug lockable by jack with screws
Supply 2 PD’s with 24V and 5 V at a S7-200 / 300 / 400 AG interface
PD - interface - multiplexer
all connectors and controls on the front
secure supply of two devices that want to provide from the S7
all PD functions can be accomplished parallel by 2 PD’s
no additional or specific adapters needed
connecting mechanics, pin assignment and the electrical data correspond to the PD/PLC-interfaces
3m cable for PLC-connection included in delivery
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
14 watt
Display:
LED for function and watchdog supervision
Interfaces:
to the PLC:
9 pol. plug for AG-connection
to the PD/PC:
2 x 9 pol. jack for PD-connection
Operating temperature:
5 - 55°C
Case:
metal case with mounting flange
Dimensions:
95 x 35 x 135 mm
Doubling of PPI/MPI/Profibus-interface without bus-connector
Do you have a single control with panel in use and have to accomplish a
little modification in the control program? No problem, plug the
T-Connector on the PLC, the panel and PC to the device and then both
participants can work with the PLC without annoying bus-cable tapering
and interconnections.
article:
Art. ID.
name
price
9361-7 T-Connector to PPI / MPI-Bus
doubling of PPI/MPI/Profibus-port without bus connector
accessories:
Art. ID.
name
9359.1:1 1:1 cable 9pins D-SUB
D-SUB 9pins (male) <=> D-Sub 9pins (female), 1to1-assignment
9391.1
56
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9371-24 Power connector 2pins big
connector plug lockable by jack with screws
price
Useful additional Hardware for your PLC
robust steel plate case with mounting flange
easy handling and therefore quick on-site operation
replacement for already discontinued original products
Easy profinet-connection by a click
Fast assembly by Fast-Connect-Version
High interference resistance because of full metal case
Visual connection control
Cable connection via comfortable insulation displacement technology
Captive two-screw mounting system
Locking with metal nose, so no collapse possible
Connector-type:
180° RJ45-plug
Terminals:
4-wire + Shield for Industrial Ethernet FC-cables
Fast Connect (FC):
Yes
Baudrate:
100 Mbps - Cat 5e
Cable length:
maximum 100m
Operating temperature:
-20 - +70°C
Storage temperature:
-40 - +80°C
Relative humidity during
operation:
<95%
Isolation class:
IP 20
Dimensions (WxHxD):
13,7 x 16 x 55mm
Weight:
45g
article:
Art. ID.
name
price
300 901-1BB10 Profinet-Connector
Connector for industrial fast-connect-cable
Join a subscriber with an integrated test function
status display for bus test functions
high interference resistance because of full metal case
visual connection control
cable connection via comfortable insulation displacement technology
captive one-screw mounting system
integrated shiftable load resistor
cable outlet versions 0° / 45° / 90°
other Gasanalyse
PLC accessories
Technical Specifications:
Technical Specifications:
Supply voltage:
5V/DC
Power consumption:
0,15 watt
Display:
4 status-LEDs
Interfaces:
to the PLC:
PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
to the PD/PC:
PD/diagnosis-socket (only at the 45° and 90° variant)
others:
2 x appliance for connecting a 8mm buscable
Operating temperature:
-20 - +75°C
Case:
zinc-diecast
Dimensions:
66 x 40 x 16 mm
article:
Art. ID.
name
price
9350-0-DIAG DiagConn 0° Highend-connector
for PROFIBUS with diagnosis functions
9350-4-DIAG DiagConn 45° Highend-connector
for PROFIBUS with diagnosis functions
9350-9-DIAG DiagConn 90° Highend-connector
for PROFIBUS with diagnosis functions
57
73
Coupling of one PLC to several PD’s or one PD to several PLC’s
connecting mechanism, pin assignment and electrical data match the control’s specifications
applicable with all original and compatible programming devices
all connection- and operating controls frontal
supply from the PLC or external
Technical Specifications:
Supply voltage:
5V/DC
Power consumption:
1 watt
Display:
LED-display for aktiv port
Handling/Configuration:
toggle or rotary switch for port selection
Interfaces:
to the PLC:
1 / 2 / 4 x TTY/20mA current loop (switch passiv, PLC aktiv)
to the PD/PC:
1 / 2 x TTY/20mA current loop (100 % mechanically and electr. compatible)
Operating temperature:
5 - 55°C
Case:
EMC-dense metal case with mounting flange
Dimensions:
135 x 110 x 50 mm
Interface switch for the S5
Interface-switch for PD/PC
other PLC accessories
Your PD-interface of the S5-PLC is already occupied with a panel and
you should accomplish program modifications without removing the
panel? No problem, connect a device if the PG-Switch-family one-time to
the PLC and then connect the panel and also your PC to the device. With
a toggle switch (PG-Switch-I) you select the pc or pannel to communciate
with the PLC. The selection on a PG-Switch-II will be driven via the
24V-controll input. The PG-Switch-III has an automatic detection. The
pannel is connected to the device and can communicate to the PLC. You
connect your PD/PC to the device and it switches automatically, so you
can communicate. After plug off the PD/PG the device switches back, so
the pannel is connected to the PLC.
You have to work with more PLC-devices, but no pleasure to switch
on/off? No problem, you connect a device of the AG-Switch-family to the
PLC-devices and your PD/PC and you will be able to communicate to
both PLCs. The selection which PLC you make for AG-Switch-I via toggle
switch and for the AG-Switch-II via 24V-controll input.
article:
Art. ID.
9360.A
name
price
AG-SWITCH
PD-/PLC-Switcher
9360.A-4 AG-SWITCH 4-times
PD-/PLC-Switcher
9360.A-2 AG-SWITCH II
PD-/PLC-Switcher
9360
PG-SWITCH
PD- / PLC-Switcher
9360-2
PG-SWITCH II
PD- / PLC-Switcher
9360-3
PG-SWITCH III
PD- / PLC-Switcher
accessories:
Art. ID.
9391.1
name
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9371-24 Power connector 2pins big
connector plug lockable by jack with screws
58
price
Intelligent networking of S5-PLCs
no bus terminal resistor necessary
LEDs for controlling the data stream on the IBX-bus
all connection- and operating controls frontal
LWL-adapter available as an option
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
5 watt
Display:
4 status-LEDs
Handling/Configuration:
DIP-Switch for address Configuration
Interfaces:
to the AG and PD/PC:
TTY/20mA current loop (iBx-Klemme aktiv, PLC passiv)
others:
10 x screw type terminal for bus connection A and B
2 x screw type terminal for 24V/DC power supply
Operating temperature:
5 - 55°C
Case:
powder coated metal case with mounting flange
Dimensions:
97 x 149 x 36 mm
Linking of S5-PLC’s without modifying the PLC-program
You have to link several S5-PLC’s so that in case of need you can
respond to all of them without modifying the PLC-program? No problem,
connect all PLC’s that are in the run with the IBX-Klemme, set up the
respective address (1 to 30) at the IBX-Klemme and with the address 0 You have to configure a Sinec-L1-bus, own the master, but there’s no
you will be able to respond to all PLC’s via PD-bus-path selection.
BT-777-busterminal to buy? No problem, connect the IBX-Klemme to
every S5-PLC that is in the run via the optional IBX-SPS-cable, supply
every IBX-Klemme with ext. 24V DC if the PLC is not able to provide it,
set-up the address 0 and define the actual L1-bus-address in the PLC.
Now your master can communicate with the slave-assemblies.
Longer distances for L1-Bus
other Gasanalyse
PLC accessories
Sinec-L1-bus configuration without BT-777-terminal
You need for your L1-Bus higher distance like the possible 1200m? You
have strong distrubance on your L1-Bus? You need a serial line for higher
distances and this galvanic decoupled? No problem, all this points are
solved through the LWL-adapter. They are available for artificial and
optical fibre, for L1-Bus and RS232.
article:
Art. ID.
9530
name
price
iBx-Busterminal
intelligent bus terminal, substitute for BT-777-terminal, optional PLC-connecting cable
59
73
77
accessories:
Art. ID.
name
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9429
DUP-TEXT-Display DUPLINE
Pannel for the Dup-Line-bus
9530-9S
iBx-SPS-cable to PLC 3m
one side angled, other side straight cable tap
price
9530-9WS iBx-SPS-cable to PLC 3m
bothside 45° angle
9531-K
Light wire-adapter
for plasticfibre-cables
9531-G
Light wire-adapter
for glasfibre-cables
9532-K
Light wire-adapter
RS232 for plasticfibre-cables
9428
S5-DUP-Interface card
Potential split level conversion for L1-BUS, TTY, RS232, RS422
sonstiges
SPS
Zubehör
Schnittstellen-Multiplexer
other Gasanalyse
PLC
accessories
100% galvanic separation of the interfaces up to 1000V
available in 6 different models
baud rate up to 38,4 kBd
4 LEDs to control the data flow
interface configuration printed on a label on the front
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
4 watt
Display:
4 status-LEDs
Handling/Configuration:
-
Interfaces:
others:
2 x D-Sub-female 9pol
3 x screw type terminal for 24V/DC power supply
18 x screw type terminal for bus connection A and B
Operating temperature:
5 – 55°C
Case:
EMC-dense powder coated metal case with mounting flange
Dimensions:
170 x 125 x 40 mm
Interface accommodation with galvanic decoupling
You have to connect two devices with different hardware-interfaces? No
problem, with the devices of the UNICOM-familiy you will be able to
couple both interfaces and get additional a galvanic decoupling up to
1000V.
article:
Art. ID.
9505-3 UNI-COM II RS422 <-> RS232
isolated level conversion up to 1000V for RS232 <=> RS422
9505-1 UNI-COM II SINEC-L1 <-> RS232
isolated level conversion up to 1000V for L1-BUS <=> RS232
9505-2 UNI-COM II TTY <-> RS232
isolated level conversion up to 1000V for TTY <=> RS232
9505-4 UNI-COM II TTY <-> RS422
isolated level conversion up to 1000V for TTY <=> RS422
60
66
62
76
78
74
name
price
accessories:
Art. ID.
name
price
9359.1:1 1:1 cable 9pins D-SUB
D-SUB 9pins (male) <=> D-Sub 9pins (female), 1to1-assignment
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9505-K
RS-232-cable for UNI-COM II
PC <=> UNI COM II (RS232 side)
Interface converter for connecting different interface types
computers have an optional possibility of attendance, as Master or Slave, on Sinec-L1-bus
the interfaces of the L1 controllers are with plug-in modules (RS232, RS422, TTY, L1-bus) customizable
easy data exchange with the L1-Bus-Controller via ASCII protocol
autarkic implementation of the controller’s L1-Bus functions, also without computer performance
settings for diverse baud rates and modes
status display for preset modes, errors and specifications
Supply voltage:
5V/DC +/- 20%
Power consumption:
-
Display:
2 x 7-segment display
Handling/Configuration:
DIP-Switch
Interfaces:
others:
1 x D-Sub-female 9pol for PC connection
3 x Weidmüller for 5V/DC power supply
9 x Weidmüller for bus connection A and B
Operating temperature:
5 – 55°C
Case:
plastic case
Dimensions:
160 x 100 x 50 mm
other Gasanalyse
PLC accessories
Technical Specifications:
Sinec-L1-bus without master (CP530)
You have a running Sinec-L1-bus and your master the CP530 is defective
or rather broke down and the bus has to continue running? No problem,
connect the L1-controller to the according bus-modules instead of the
CP530, define the circulation list of the clients and the L1-bus continues
running immediately.
article:
Art. ID.
9510
name
price
L1-BUS Controller DIN-rail-holder
for 5VDC without plug-in module
9510-F L1-BUS Controller DIN-rail-holder Flash-version
for 5VDC without plug-in module, configuration locked in the flash memory
9511
L1-BUS Controller Desktop Device
for 5VDC without plug-in module
9511-F L1-BUS Controller Desktop Device Flash-version
for 5VDC without plug-in module, configuration locked in the flash memory
accessories:
Art. ID.
name
9520
L1-Bus-module
Interface module for the L1-Controller
9521
RS-232-module
Interface module for the L1-Controller
9522
RS-422-module
Interface module for the L1-Controller
9523
TTY-20mA-module
Interface module for the L1-Controller
price
61
73
DCF-time reception for the PLC via digital I/O
transfer of DCF-time and date to the PLC
representation in sec, min, h, day, month, year, weekday
statusbits for summer-, wintertime , DCF-OK, etc.
4 LEDs for displaying power supply, mode and DCF-Signal
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
3 watt
Display:
4 status-LEDs
Handling/Configuration:
DIP-Switch
Interfaces:
to the PLC:
5 x screw type terminal for E/A-inputs
5 x screw type terminal for E/A-outputs
others:
2 x screw type terminal for 24V/DC power supply
15pol female for DCF77-antenna connection
Operating temperature:
5 - 55°C
Case:
powder coated metal case with mounting flange
Dimensions:
97 x 149 x 36 mm
Atomic time at the PLC
sonstiges
SPS
Zubehör
Schnittstellen-Multiplexer
other PLC
accessories
For your production flow you’re always in need of an exact time? No
problem, connect the SPS-Clock with 4 digital in-/outputs of your PLC,
after synchronisation of the SPS-Clock the updating time can be read in a
DB of the PLC.
article:
Art. ID.
name
9366
DCF-77-antenna
cable length 5m for connecting to SPS-Clock
9365
SPS-CLOCK
atomic time to digital I/O of PLC
price
9366-1 Amplifier for DCF-antenna
processing of the DCF-77-signal for longer distances between antenna and SPS-Clock
accessories:
Art. ID.
9391.1 24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
66
62
name
price
Printing connecting unit for the PLC via digital I/O
the PG-PRINT has to be connected to the normal PLC-I/O-level with a cable (not scope of the standard
delivery) via 8 digital outputs and 1 digital input and the provided PLC-software installed in the S5-PLC
now db-contents (e.g. texts) can be easily passed on via bits and control words to any Centronics-printer
(preferably EPSON-emulation in accordance with special characters)
3 additional signals (on demand) can query printer in error status (input), paper-out (input), and printer
can be initialised (output)
with this system you can accomplish e.g. faults and software-flow-controls well-priced
the PG-PRINT-III is designed with a robust metal case and full 8-bit. The connecting cables are assembled on the case. An exten
sive
software tool is included in delivery
the PG-PRINT is designed with a plastic case and 7-bit
he will be directly plugged on the Centronics-socket. The connecting cable to PLC is not included in delivery
Supply voltage:
24V/DC +/- 20%
Power consumption:
6 watt
Display:
LED for power supply
Interfaces:
to the PLC:
1 x phönix plug for PLC-connection
to the PD/PC:
1 x 25pol D-Sub-female for printer connection
others:
1 x connection plug for 24V/DC power supply
Operating temperature:
5 - 55°C
Case:
powder coated metal case
Dimensions:
109 x 107 x 34 mm
Direct printing from the PLC via dig. I/O
You need production data, circulation lists of your PLC’s, but don’t want to
use a CP or don’t get a serial printer anymore? No problem, you need 8
digital outputs and 3 digital inputs of the PLC, and if you connect the
PG-Print at it you can generate these lists with a EPSON- or
HP-compatible parallel printer.
article:
Art. ID.
9364
name
price
PG-PRINT
printing out of the PLC via dig. I/O
9364-2 PG-Print III
incl. PLC-software + cable
9364-3 PG-PRINT-S5-softwaretools
handling blocks for comfortable approach of the PG-Print
Gasanalyse
STEP5other
/ STEP7
Programmierung
SPS-Software-Tools
PLC -accessories
Technical Specifications:
accessories:
Art. ID.
name
price
9391.1 24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
63
81
79
Recording of serial transmission lines for error analysis
listening in, logging and analysing of asynchronous communication protocols
versions for RS232 / RS422 / RS485 and TTY
galvanic separation of PC and communication line
data output in HEX- or ASCII-format
Technical Specifications:
Supply voltage:
9V/DC
Power consumption:
- watt
Interfaces:
to the PLC:
depending on the variant:
2 x RS232
2 x RS422
2 x TTY/20mA current loop
to the PD/PC:
2 x RS232
Operating temperature:
5 - 55°C
Case:
powder coated metal case
Dimensions:
130 x 80 x 35 mm
Logging and analysis of communication data
sonstiges
SPS
Zubehör
Schnittstellen-Multiplexer
other PLC
accessories
You want check,why your application can´t communicate with the PLC or
why after some time past the communication will be broken? No problem,
integrate the PG-FOX-hardware in this communication way and log
through the PG-FOX-software on an PC the sended data in the exact
time. So, you can later check the date and find a solution of the problem.
article:
Art. ID.
name
price
9362-1P PG-FOX-PLUS RS-232
active protocoll-recording for RS232-track to PC with 2 COM-ports
9362-2P PG-FOX-PLUS RS-422
active protocoll-recording for RS422-track to PC with 2 COM-ports
accessories:
Art. ID.
name
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9362
PG-FOX-software 16 Bit
DOS
9362-32 PG-FOX-software 32 Bit
Win95/98/NT/2000/XP
9362-U U-adapter
power supply
64
66
62
price
Quick and comfortable debugging for the PLC and the bus
simple connect to the PLC via the PD-interface
troubleshooting without the need of programming one line
error report in a clear and plain way
signal recording possible
comfortable operation via function keys
2 languages selectable (German/English)
power supply from the PLC
optional power supply possible, in case PLC has no power sources
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
3,5 watt
Display:
LCD-display
Handling/Configuration:
integrated keypad with function keys
Interfaces:
to the PLC:
TTY/20mA current loop
Operating temperature:
5 - 55°C
Case:
powder coated metal case
Dimensions:
187 x 110 x 49 mm
Your installation shows an error and the commissioning engineer isn’t
available? No problem, connect S5-DIAG with the PLC, enter reason of
PLC’s malfunction (e.g. O32.5 doesn’t come) and the device lists the
possibilities why the output has not been set. So you’re able to figure out
the problem (e.g. safety door not locked) quickly.
article:
Art. ID.
9368
name
price
S5-DIAG
Hand-held unit incl. connecting-cable
other Gasanalyse
PLC accessories
S5-PLC-diagnosis or signal’s doesn’t come, but why?
accessories:
Art. ID.
name
price
9391.1 24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
65
73
Programming several S5-PLC’s with one PD without plugging on/off
compatible with MUX757 in KOR-MUX-mode
operation as TELE-Switch possible
Ports (1-31) are cascadable
up to 8 accessible slaves per COM-port of PC
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
12 watt
Display:
8 LEDs for displaying the aktiv port
Handling/Configuration:
DIP-Switch for cascadability of the ports and mode Configuration
Interfaces:
to the PLC:
8 x TTY/20mA current loop (100 % mechanically and electr. compatible)
8 x RS232: 9,6 KBd - 115,2 KBd / fully assigned
to the PD/PC:
1 x TTY/20mA current loop (100 % mechanically and electr. compatible)
1 x RS232: 9,6 KBd - 115,2 KBd / with a 1on1-cable to the PC
Operating temperature:
5 - 55°C
Case:
powder coated metal case with mounting flange
Dimensions:
352 x 182 x 42 mm
Many PLC-devices conflated
sonstiges
SPS
Zubehör
Schnittstellen-Multiplexer
other PLC
accessories
82
You have many PLC and you want to programm them central on one
place? No problem, you have to connect them all to the KOR/MUXTele-Switch an with the PD-bus-selection of your Step5-software you go
ONLINE. Of course the KOR/MUX-Tele-Switch is cascadable, so you can
connect up to 30 PLCs to the devices.
article:
Art. ID.
name
price
9370-KOR KOR-MUX / TELE-SWITCH
8 devices (TTY/RS232) to 1 port (TTY/RS232), supports PD-path selection, also for TP-I, TP-II
accessories:
Art. ID.
name
9359.1:1 1:1 cable 9pins D-SUB
D-SUB 9pins (male) <=> D-Sub 9pins (female), 1to1-assignment
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9371-24 Power connector 2pins big
connector plug lockable by jack with screws
66
62
price
Communicate with multiple serial devices without replugging
cascading of the switches on 4 bits of the Centronics interface
serial and Centronics interface conected through
active port indicated by a LED
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
1,5 watt
Display:
16 LEDs for displaying the aktiv port
Handling/Configuration:
DIP-Switch for cascadability of the Switches
Interfaces:
16 x RS232: 9,6 KBd - 115,2 KBd / fully assigned
1 x RS232 input: 9,6 KBd - 115,2 KBd / with a 1on1-cable to the PC
1 x RS232 output: 9,6 KBd - 115,2 KBd / with a 1on1-cable to the next switch
1 x Centronics input: for switch selection via 4 bit
1 x 25pin D-Sub output: for switch selection via 4 bit
Operating temperature:
5 - 55°C
Case:
powder coated metal case with mounting flange
Dimensions:
352 x 182 x 42 mm
article:
Art. ID.
name
price
accessories:
Art. ID.
name
9359.1:1 1:1 cable 9pins D-SUB
D-SUB 9pins (male) <=> D-Sub 9pins (female), 1to1-assignment
9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
9371-24 Power connector 2pins big
connector plug lockable by jack with screws
price
other Gasanalyse
PLC accessories
9360-1616-times-PC-SWITCH
16 devices to one RS232-port, changeover carried out by software andand LPT-port
67
73
Determination of the residual oxygen content in gases
very precise O2-measurement results
devices with (OSC-II) and without (OSM-HMG) measuring probe
adaptation of the measuring probes possible via probe offset
devices are designed for industrial application
continuous oxygen measuring by permanent running
Oxygen content in gases
mobile and accurate measurement of oxygen at OSM sensors
Gasanalysis
Gasanalyse
sonstiges
SPS Zubehör
display of oxygen in %
metering range 0 - 100% oxygen
handily use because of battery operation
for external OSM-sensor
pin assignment of the DIN-sockets on the label
zero compensation and slope balance via Potis
resolution of the metering range in 0,1% steps
accuracy over total metering range +/- 1%
output voltage proportional to the aligned measured value of 0 - 1V
Technical Specifications:
Supply voltage:
9V/DC battery block integrated
12 - 24V/DC charging voltage
Power consumption:
0,8 watt
Display:
LCD-display / 13mm / 3,5-digit
LED for charge control
Handling/Configuration:
on-/off-switch
2 x poti
Interfaces:
4pol DIN-female for sensor connection
5pol DIN-female for test port
jack bush for charging cable
Operating temperature:
5 - 55°C
Case:
plastic case (black)
Dimensions:
195 x 100 x 40 mm
Easy handily oxygen display
You need the concentration of oxygen in your neighborhood? No problem,
with the mobile HMG you can determine the concentration from 1 up to
100% with a exactness of 1% (dependend on your sensor).
article:
Art. ID.
9101.9 OSM-HMG
hand measuring instrument
68
76
78
74
9101.2 OSM sensor
Plum - O2 - Cell
name
price
Analyzer for determination of residual oxygen in gases
integrated zirconium probe
high metering precesion
automatic switch of range %, ppm, E-xx
high resolution of the display areas
integrated switchable pump
integrated flowmeter with regulating valve 0 - 10 l/h
probe offset with known O2-content of test gas possible
free adjustable limit values for the relay outputs
configurations are code protected against accidental modifications
configurations are stored with mains failure protection
Technical Specifications:
Supply voltage:
230V/AC 50Hz
Power consumption:
200 watt
Display:
illuminated, detailed graphics display (70 x 35 mm)
5 LEDs (power, heating, relay outputs)
Handling/Configuration:
integrated keypad
Interfaces:
1 x analogue outputs: 0/4 - 20mA
3 x digital outputs: 230V / 2A
2 x sample gas connection 4mm VA-pipe (in-/outputs)
1 x D-Sub-female for RS232/422(optional)
Operating temperature:
Case:
metal case in the versions (19"-slot / table device / service carrying case)
Dimensions:
19"-slot: 440 x 370 x 135 mm
table device: 360 x 350 x 150 mm
service carrying Case: 360 x 350 x 150 mm
Oxygen analysis in industrial gases
You need a continuous measurement of the concentration of oxygen
The integratet current output issues the actual concentration in the range
without any configuration of the device or a switch of range of
of 0/4 - 20mA via free definable limits.
measurement? No problem, with the OSC-II-devices you are right. It
shows you the concentration from % down to E -24 without any action
from you. It switches automatically the ragne of measurement.
Free definable limits
Gasanalysis
Documentation of oxygen concentration
Fuzzy controller with the OSC-II
You need some limits? No problem, with the OSC-II-devices you will be
able to define 3 relay outputs (toggle switch) like UG (down level) or OG
Through 3 free configurable limits (of each kind) you won´t be able to
(top level) or as a ready-flag (internal probe has working temperature).
realice a fuzzy-controller of your heat treatment furnace.
article:
Art. ID.
name
price
9110.1 OSC-II 19" Rack Device
OxygenServiceController 100% - 10E-24%
9110.3 OSC-II Service-Transport-Box
OxygenServiceController 100% - 10E-24%
9110.2 OSC-II Desktop Device
OxygenServiceController 100% - 10E-24%
9110.0 OSC-II Wallcase
Without probe, pump and mass-flow-controller
9110.4 OSC-II Z-Box
External device with probe, pump and mass-flow-controller. Connection to wallcase with thermocouple extension wire
recommended
69
91
83
85
87
Interesting tools for your PLC control
easy handling and therefore quick on-site operation
one software release for all operating systems from Win98 to Vista
testable as demo version without installation on the hard drive
PLC-Backup and restore for the S5- and S7-PLC
backup of the PLC-programs for data protection
simple restoring of the made backup
article:
Art. ID.
9650
name
SPS -PLC-software-tools
Kommunikationstreiber
SPS-Data saftey S5-BACKUP/S5-RESTORE
DOS
company license
9650-UNI PLC-Data saftey S5/S7/H1-Backup
Win95/98/NT/2000/XP
company license
9650-MPI SPS-Data saftey S7-BACKUP/S7-RESTORE
DOS
company license
Process - Visualisation, PLC - data directly into Excel
visualisation on screen e.g. in excel
logging via the printer/screen
archiving on the PC (data saving/restoring)
process control by the PC
safe operation, using standardised user interface
article:
Art. ID.
name
9820
CIM-2001 for single S5 (without Bus)
Single license
9820-F
CIM-2001 for single S5 (without Bus)
Company license
9820-B
CIM-2001 for up to 30 x S5 (with Bus)
Single license
9820-B-F CIM-2001 for up to 30 x S5 (with Bus)
Company license
70
82
price
9821
CIM-2001 for S7-300/400
Single license
9821-F
CIM-2001 for S7-300/400
Company license
9822
CIM-2001 for S7-300/400 over RFC1006
Single license
9822-F
CIM-2001 for S7-300/400 over RFC1006
Company license
price
PG2000 - Programming with comfort
Programming/controlling of S5/7[FREEWARE without
support]-PLC’s
Remote maintenance of a S7-PLC[FREEWARE without support]
You have to solve a problem in the PLC-program, but the installation is
not placed nearby? No problem, start your PG-2000-software with "option
teleservice", activate your modem and after selection intra PG-2000If you have to accomplish modifications in your installation, connect the software access to the PLC is possible as if being on-site.
PC with the PLC and start your programming package PG-2000. With
this software you have one and the same user interface for S5 and
S7[FREEWARE without support], so you don’t have to switch between
both versions, just as it is with most of other packages.
Data logging of your PLC
91
87
89
STEP5
/ STEP7
Visualisierung
programming
/-OPC-Server
Zubehör
SPS
- Kommunikationstreiber
for Siemens-PLC’s S5-90 … S5-155, S7-300[FREEWARE without support] and S7-400[FREEWARE
without support]
according to the licensed usage rights STEP5 + STEP7[FREEWARE without support] can be programmed
in STL statementlist, LAD ladder mode and CFS (for S5) / FBD (for S7[FREEWARE without support])
functionplan
system requirements AT386 with 4MB RAM, 16MB free space on the fixed disc and MS-Windows version
98/NT/2000/XP/Vista/windows 7
direct processing of the original S5D files; existing files can be assumed directly from Siemens-PD´s; a conversion is not nece ssary; with
PG-2000 created S5D files can also be processed with a Siemens-PD without difficulty
the enhanced graphic symbols in LAD and CFS (for S5) / FBD (for S7[FREEWARE without support]) are integrated
at LAD and CFS (for S5) / FBD (for S7[FREEWARE without support]) all symbols are easily selectable from a toolbar (can be posit ioned
freely)
online syntax checking already during input of the instruction
the main commands are directly selectable by using the mouse or by keypress
no differentiation of the normal modes: input, view, correction
during editing direct switching of the representation types STL, LAD, CFS (for S5) / FBD (for S7[FREEWARE without support]) is possible,
as well as parallel presentation
the accountant of PG-2000 provides numerous features for marking, transferring, deleting and comparing of single blocks, block groups or all
blocks
the result of a block comparison is displayed readable in STL form, not as hexdump
via Windows clipboard the block feature enables comfortable copying, scrolling and deleting of single lines, marked blocks or e ntire networks
blocks which contain calls of no longer existing FB’s can be edited anyway
if parameters will be inserted or deleted from a FB-header, the already existing accesses to the formal operand retains
previously necessary commands "NOP 0", which were generated in the course of program input in LAD and CFS (for S5) / FBD (for
S7[FREEWARE without support]) are no longer required
PG-2000 is modularly structured, so that the user only has to aquire the program modules he actually needs for his daily work
low priced subsequent- and company licenses are available; for schools and for occupational field there are non-commercial scho ol licenses
available (without a limitation of users and for a nonrecurring low nominal charge)
everything existing so far should be taken for granted at PG-2000, because PG-2000 is the only open PLC programming system of t he future;
PG-2000 will be constantly developed, even particular desires of users will be taken into account in full detail
at reorder within 6 months the already paid license charge will be credited to 100%, within 12 months to 50%
the integrated project management offers an optimal overview of the projects
detailled online help with graphic elements and cross references
simultaneous display of lines- and symbolism comments
Backup of formulas without knowledge of PLC
You shortly need a logging of your PLC’s operating states respectively
are on the way of figuring out a problem and have no datalogger? No
problem, connect the PC, start the PG-2000-software with "option
datalogger", define relevant variables, appoint timestamp and then the You consistently have to back up formulas which are stored in data blocks
recording starts running immediately. The data will be stored on the fixed or back up production protocols, but the employee in charge has no
disc according to the configuration.
knowledge of PLC-programming respectively handling PC-programs? No
problem, install the PG-2000-software with "option DB-backup" on your
PC and connect it with the PLC. The employee only has to click on a
symbol on the desktop of the PC and the data blocks of the
parameterised PLC will be stored on the fixed disc. Afterwards the
program closes itself and the mentioned employee didn’t had to
accomplish an intervention on the program.
71
91
83
85
87
Project/history-administration of PLC-programming
Who doesn’t know this? When accessing the PLC you find out that parts
of the program flow has been changed and none of the
colleagues/employees are responsible for it? Therefore install the "option
controller" for the PG-2000-software, and every activity of the employees
working with the program will be recorded. So you can identify the one
employee very quickly and changes are ex post comprehensible, too.
STEP5 - Programming with comfort
STEP5
/ STEP7 - programming
SPS - Kommunikationstreiber
for Siemens-PLC’s S5-90 … S5-155, S7-300[FREEWARE without support] and S7-400[FREEWARE
without support]
according to the licensed usage rights STEP5 + STEP7[FREEWARE without support] can be programmed
in STL statementlist, LAD ladder mode and CFS (for S5) / FBD (for S7[FREEWARE without support]) functionplan
system requirements AT386 with 4MB RAM, 16MB free space on the fixed disc and MS-Windows version 98/NT/2000/XP/Vista/windows 7
direct processing of the original S5D files; existing files can be assumed directly from Siemens-PD´s; a conversion is not nece ssary; with
PG-2000 created S5D files can also be processed with a Siemens-PD without difficulty
the enhanced graphic symbols in LAD and CFS (for S5) / FBD (for S7[FREEWARE without support]) are integrated
at LAD and CFS (for S5) / FBD (for S7[FREEWARE without support]) all symbols are easily selectable from a toolbar (can be posit ioned
freely)
online syntax checking already during input of the instruction
the main commands are directly selectable by using the mouse or by keypress
no differentiation of the normal modes: input, view, correction
during editing direct switching of the representation types STL, LAD, CFS (for S5) / FBD (for S7[FREEWARE without support]) is possible,
as well as parallel presentation
the accountant of PG-2000 provides numerous features for marking, transferring, deleting and comparing of single blocks, block groups or all
blocks
the result of a block comparison is displayed readable in STL form, not as hexdump
via Windows clipboard the block feature enables comfortable copying, scrolling and deleting of single lines, marked blocks or e ntire networks
blocks which contain calls of no longer existing FB’s can be edited anyway
if parameters will be inserted or deleted from a FB-header, the already existing accesses to the formal operand retains
previously necessary commands "NOP 0", which were generated in the course of program input in LAD and CFS (for S5) / FBD (for
S7[FREEWARE without support]) are no longer required
PG-2000 is modularly structured, so that the user only has to aquire the program modules he actually needs for his daily work
low priced subsequent- and company licenses are available; for schools and for occupational field there are non-commercial scho ol licenses
available (without a limitation of users and for a nonrecurring low nominal charge)
everything existing so far should be taken for granted at PG-2000, because PG-2000 is the only open PLC programming system of t he future;
PG-2000 will be constantly developed, even particular desires of users will be taken into account in full detail
at reorder within 6 months the already paid license charge will be credited to 100%, within 12 months to 50%
the integrated project management offers an optimal overview of the projects
detailled online help with graphic elements and cross references
simultaneous display of lines- and symbolism comments
License- and usage rights:
due to user handling reasons we abstain from software protection by dongle or likewise, but each license incorporates the licensee’s address
and appears several times in the program
though a single license may be installed on several PC’s, it is not allowed to be used on more than one PC at the same time
subesequent licenses are needed if simultaneous working on several PC’s is required; the activation of options has to be identi cal with the
ones of the single license
a company license allows one and the same company resp. plant to use the PLC programming software in unlimited numbers simultaneously;
each plant resp. division requires a separate company license
a school license allows one and the same school resp. training centre to use the PLC programming software in unlimited numbers; with
signing the license agreement the responsible trainer confirms that the software will be used uncommercial and only for training purposes
S5 requires at least S5-STL, S7 at least S7-STL(FREEWARE without support)
economic prices because of modular usage rights
free software update and hotline service
72
Programming/controlling of S5/7[FREEWARE without
support]-PLC’s
Remote maintenance of a S7-PLC[FREEWARE without support]
You have to solve a problem in the PLC-program, but the installation is
not placed nearby? No problem, start your PG-2000-software with "option
teleservice", activate your modem and after selection intra PG-2000If you have to accomplish modifications in your installation, connect the software access to the PLC is possible as if being on-site.
PC with the PLC and start your programming package PG-2000. With
this software you have one and the same user interface for S5 and
S7[FREEWARE without support], so you don’t have to switch between
both versions, just as it is with most of other packages.
Data logging of your PLC
91
87
89
You shortly need a logging of your PLC’s operating states respectively
are on the way of figuring out a problem and have no datalogger? No
problem, connect the PC, start the PG-2000-software with "option
datalogger", define relevant variables, appoint timestamp and then the
recording starts running immediately. The data will be stored on the fixed You consistently have to back up formulas which are stored in data blocks
or back up production protocols, but the employee in charge has no
disc according to the configuration.
knowledge of PLC-programming respectively handling PC-programs? No
problem, install the PG-2000-software with "option DB-backup" on your
PC and connect it with the PLC. The employee only has to click on a
symbol on the desktop of the PC and the data blocks of the
parameterised PLC will be stored on the fixed disc. Afterwards the
program closes itself and the mentioned employee didn’t had to
accomplish an intervention on the program.
Project/history-administration of PLC-programming
STEP5
/ STEP7
Visualisierung
programming
/-OPC-Server
Zubehör
SPS
- Kommunikationstreiber
Backup of formulas without knowledge of PLC
Who doesn’t know this? When accessing the PLC you find out that parts
of the program flow has been changed and none of the
colleagues/employees are responsible for it? Therefore install the "option
controller" for the PG-2000-software, and every activity of the employees
working with the program will be recorded. So you can identify the one
employee very quickly and changes are ex post comprehensible, too.
article:
Art. ID.
9851
name
price
PG-2000 STEP5-STL single license
representation statementlist for Siemens S5
9851-3 PG-2000 STEP5-STL company license
representation statementlist for S5-90 ... 155U
9851-2 PG-2000 STEP5-STL subsequent license
representation statementlist for S5-90 ... 155U
73
options:
Art. ID.
9851-CTR
name
price
PG-2000 option Controller single license
comfortable Projekt / History - administration
9851-CTR-3 PG-2000 option Controller company license
comfortable Projekt / History - administration
9851-CTR-2 PG-2000 option Controller subsequent license
comfortable Projekt / History - administration
9856
PG-2000 option Datalogger single license
linewriter for the PLC
9856-3
PG-2000 option Datalogger company license
linewriter for the PLC
9856-2
PG-2000 option Datalogger subsequent license
linewriter for the PLC
9851-DB
PG-2000 option DB - Backup single license
automatic Backup / Restore of DB's
9851-DB-3 PG-2000 option DB - Backup company license
automatic Backup / Restore of DB's
9851-DB-2 PG-2000 option DB - Backup subsequent license
automatic Backup / Restore of DB's
STEP5
/ STEP7
- programming
Zubehör
SPS - Kommunikationstreiber
9854
PG-2000 option CFS single license
representation functionplan
9854-3
PG-2000 option CFS company lic.
representation functionplan
9854-2
PG-2000 option CFS subsequent lic.
representation functionplan
9858
PG-2000 option H1 single license
programming over Network-adapter
9858-3
PG-2000 option H1 company license
programming over Network-adapter
9858-2
PG-2000 option H1 subsequent license
programming over Network-adapter
9853
PG-2000 option LAD single license
representation ladder mode
9853-3
PG-2000 option LAD company license
representation ladder mode
9853-2
PG-2000 option LAD subsequent license
representation ladder mode
STEP7 - Programming with comfort
for Siemens-PLC’s S5-90 … S5-155, S7-300[FREEWARE without support] and S7-400[FREEWARE
without support]
according to the licensed usage rights STEP5 + STEP7[FREEWARE without support] can be programmed
in STL statementlist, LAD ladder mode and CFS (for S5) / FBD (for S7[FREEWARE without support])
functionplan
system requirements AT386 with 4MB RAM, 16MB free space on the fixed disc and MS-Windows version 98/NT/2000/XP/Vista/windows 7
direct processing of the original S5D files; existing files can be assumed directly from Siemens-PD´s; a conversion is not nece ssary; with
PG-2000 created S5D files can also be processed with a Siemens-PD without difficulty
the enhanced graphic symbols in LAD and CFS (for S5) / FBD (for S7[FREEWARE without support]) are integrated
at LAD and CFS (for S5) / FBD (for S7[FREEWARE without support]) all symbols are easily selectable from a toolbar (can be posit ioned
freely)
online syntax checking already during input of the instruction
the main commands are directly selectable by using the mouse or by keypress
no differentiation of the normal modes: input, view, correction
during editing direct switching of the representation types STL, LAD, CFS (for S5) / FBD (for S7[FREEWARE without support]) is possible,
as well as parallel presentation
the accountant of PG-2000 provides numerous features for marking, transferring, deleting and comparing of single blocks, block groups or all
blocks
the result of a block comparison is displayed readable in STL form, not as hexdump
via Windows clipboard the block feature enables comfortable copying, scrolling and deleting of single lines, marked blocks or e ntire networks
blocks which contain calls of no longer existing FB’s can be edited anyway
if parameters will be inserted or deleted from a FB-header, the already existing accesses to the formal operand retains
previously necessary commands "NOP 0", which were generated in the course of program input in LAD and CFS (for S5) / FBD (for
S7[FREEWARE without support]) are no longer required
PG-2000 is modularly structured, so that the user only has to aquire the program modules he actually needs for his daily work
low priced subsequent- and company licenses are available; for schools and for occupational field there are non-commercial scho ol licenses
available (without a limitation of users and for a nonrecurring low nominal charge)
everything existing so far should be taken for granted at PG-2000, because PG-2000 is the only open PLC programming system of t he future;
PG-2000 will be constantly developed, even particular desires of users will be taken into account in full detail
at reorder within 6 months the already paid license charge will be credited to 100%, within 12 months to 50%
the integrated project management offers an optimal overview of the projects
detailled online help with graphic elements and cross references
simultaneous display of lines- and symbolism comments
License- and usage rights:
74
82
90
FREEWARE, no guarantee and support
Step7 in demo-version (see: Main downloads) included, costless FREEWARE-license must be requested
Remote maintenance of a S7-PLC[FREEWARE without support]
You have to solve a problem in the PLC-program, but the installation is
not placed nearby? No problem, start your PG-2000-software with "option
teleservice", activate your modem and after selection intra PG-2000If you have to accomplish modifications in your installation, connect the software access to the PLC is possible as if being on-site.
PC with the PLC and start your programming package PG-2000. With
this software you have one and the same user interface for S5 and
S7[FREEWARE without support], so you don’t have to switch between
both versions, just as it is with most of other packages.
Data logging of your PLC
Backup of formulas without knowledge of PLC
You shortly need a logging of your PLC’s operating states respectively
are on the way of figuring out a problem and have no datalogger? No
problem, connect the PC, start the PG-2000-software with "option
datalogger", define relevant variables, appoint timestamp and then the
recording starts running immediately. The data will be stored on the fixed You consistently have to back up formulas which are stored in data blocks
or back up production protocols, but the employee in charge has no
disc according to the configuration.
knowledge of PLC-programming respectively handling PC-programs? No
problem, install the PG-2000-software with "option DB-backup" on your
PC and connect it with the PLC. The employee only has to click on a
symbol on the desktop of the PC and the data blocks of the
parameterised PLC will be stored on the fixed disc. Afterwards the
program closes itself and the mentioned employee didn’t had to
accomplish an intervention on the program.
Project/history-administration of PLC-programming
91
87
89
STEP5
/ STEP7
Visualisierung
programming
/-OPC-Server
Zubehör
SPS
- Kommunikationstreiber
Programming/controlling of S5/7[FREEWARE without
support]-PLC’s
Who doesn’t know this? When accessing the PLC you find out that parts
of the program flow has been changed and none of the
colleagues/employees are responsible for it? Therefore install the "option
controller" for the PG-2000-software, and every activity of the employees
working with the program will be recorded. So you can identify the one
employee very quickly and changes are ex post comprehensible, too.
75
91
article:
Art. ID.
name
price
9855-S7-0 PG-2000 STEP7 FREEWARE without support / guarantee
STL + LAD + FBD
options:
Art. ID.
9851-CTR
name
PG-2000 option Controller single license
comfortable Projekt / History - administration
9851-CTR-3 PG-2000 option Controller company license
comfortable Projekt / History - administration
9851-CTR-2 PG-2000 option Controller subsequent license
comfortable Projekt / History - administration
9856
PG-2000 option Datalogger single license
linewriter for the PLC
9856-3
PG-2000 option Datalogger company license
linewriter for the PLC
9856-2
PG-2000 option Datalogger subsequent license
linewriter for the PLC
9851-DB
PG-2000 option DB - Backup single license
automatic Backup / Restore of DB's
9851-DB-3 PG-2000 option DB - Backup company license
automatic Backup / Restore of DB's
STEP5
/ STEP7
- programming
Zubehör
SPS - Kommunikationstreiber
76
82
90
9851-DB-2 PG-2000 option DB - Backup subsequent license
automatic Backup / Restore of DB's
9854
PG-2000 option CFS single license
representation functionplan
9854-3
PG-2000 option CFS company lic.
representation functionplan
9854-2
PG-2000 option CFS subsequent lic.
representation functionplan
9858
PG-2000 option H1 single license
programming over Network-adapter
9858-3
PG-2000 option H1 company license
programming over Network-adapter
9858-2
PG-2000 option H1 subsequent license
programming over Network-adapter
9853
PG-2000 option LAD single license
representation ladder mode
9853-3
PG-2000 option LAD company license
representation ladder mode
9853-2
PG-2000 option LAD subsequent license
representation ladder mode
9851-TS
PG-2000 option Teleservice single license
original TS-function for PG-2000
9851-TS-3
PG-2000 option Teleservice company license
original TS-function for PG-2000
9851-TS-2
PG-2000 option Teleservice subsequent license
original TS-function for PG-2000
price
STEP5 & STEP7 - Programming with comfort
License- and usage rights:
due to user handling reasons we abstain from software protection by dongle or likewise, but each license incorporates the licensee’s address
and appears several times in the program
though a single license may be installed on several PC’s, it is not allowed to be used on more than one PC at the same time
subesequent licenses are needed if simultaneous working on several PC’s is required; the activation of options has to be identi cal with the
ones of the single license
a company license allows one and the same company resp. plant to use the PLC programming software in unlimited numbers simultaneously;
each plant resp. division requires a separate company license
a school license allows one and the same school resp. training centre to use the PLC programming software in unlimited numbers; with
signing the license agreement the responsible trainer confirms that the software will be used uncommercial and only for training purposes
S5 requires at least S5-STL, S7 at least S7-STL(FREEWARE without support)
economic prices because of modular usage rights
free software update and hotline service
91
87
89
STEP5
/ STEP7
Visualisierung
programming
/-OPC-Server
Zubehör
SPS
- Kommunikationstreiber
for Siemens-PLC’s S5-90 … S5-155, S7-300[FREEWARE without support] and S7-400[FREEWARE
without support]
according to the licensed usage rights STEP5 + STEP7[FREEWARE without support] can be programmed
in STL statementlist, LAD ladder mode and CFS (for S5) / FBD (for S7[FREEWARE without support])
functionplan
system requirements AT386 with 4MB RAM, 16MB free space on the fixed disc and MS-Windows version 98/NT/2000/XP/Vista/windows 7
direct processing of the original S5D files; existing files can be assumed directly from Siemens-PD´s; a conversion is not nece ssary; with
PG-2000 created S5D files can also be processed with a Siemens-PD without difficulty
the enhanced graphic symbols in LAD and CFS (for S5) / FBD (for S7[FREEWARE without support]) are integrated
at LAD and CFS (for S5) / FBD (for S7[FREEWARE without support]) all symbols are easily selectable from a toolbar (can be posit ioned
freely)
online syntax checking already during input of the instruction
the main commands are directly selectable by using the mouse or by keypress
no differentiation of the normal modes: input, view, correction
during editing direct switching of the representation types STL, LAD, CFS (for S5) / FBD (for S7[FREEWARE without support]) is possible,
as well as parallel presentation
the accountant of PG-2000 provides numerous features for marking, transferring, deleting and comparing of single blocks, block groups or all
blocks
the result of a block comparison is displayed readable in STL form, not as hexdump
via Windows clipboard the block feature enables comfortable copying, scrolling and deleting of single lines, marked blocks or e ntire networks
blocks which contain calls of no longer existing FB’s can be edited anyway
if parameters will be inserted or deleted from a FB-header, the already existing accesses to the formal operand retains
previously necessary commands "NOP 0", which were generated in the course of program input in LAD and CFS (for S5) / FBD (for
S7[FREEWARE without support]) are no longer required
PG-2000 is modularly structured, so that the user only has to aquire the program modules he actually needs for his daily work
low priced subsequent- and company licenses are available; for schools and for occupational field there are non-commercial scho ol licenses
available (without a limitation of users and for a nonrecurring low nominal charge)
everything existing so far should be taken for granted at PG-2000, because PG-2000 is the only open PLC programming system of t he future;
PG-2000 will be constantly developed, even particular desires of users will be taken into account in full detail
at reorder within 6 months the already paid license charge will be credited to 100%, within 12 months to 50%
the integrated project management offers an optimal overview of the projects
detailled online help with graphic elements and cross references
simultaneous display of lines- and symbolism comments
91
77
Programming/controlling of S5/7[FREEWARE without
support]-PLC’s
Remote maintenance of a S7-PLC[FREEWARE without support]
You have to solve a problem in the PLC-program, but the installation is
not placed nearby? No problem, start your PG-2000-software with "option
teleservice", activate your modem and after selection intra PG-2000If you have to accomplish modifications in your installation, connect the software access to the PLC is possible as if being on-site.
PC with the PLC and start your programming package PG-2000. With
this software you have one and the same user interface for S5 and
S7[FREEWARE without support], so you don’t have to switch between
both versions, just as it is with most of other packages.
Data logging of your PLC
STEP5
/ STEP7
- programming
Zubehör
SPS - Kommunikationstreiber
You shortly need a logging of your PLC’s operating states respectively
are on the way of figuring out a problem and have no datalogger? No
problem, connect the PC, start the PG-2000-software with "option
datalogger", define relevant variables, appoint timestamp and then the
recording starts running immediately. The data will be stored on the fixed You consistently have to back up formulas which are stored in data blocks
or back up production protocols, but the employee in charge has no
disc according to the configuration.
knowledge of PLC-programming respectively handling PC-programs? No
problem, install the PG-2000-software with "option DB-backup" on your
PC and connect it with the PLC. The employee only has to click on a
symbol on the desktop of the PC and the data blocks of the
parameterised PLC will be stored on the fixed disc. Afterwards the
program closes itself and the mentioned employee didn’t had to
accomplish an intervention on the program.
Project/history-administration of PLC-programming
Who doesn’t know this? When accessing the PLC you find out that parts
of the program flow has been changed and none of the
colleagues/employees are responsible for it? Therefore install the "option
controller" for the PG-2000-software, and every activity of the employees
working with the program will be recorded. So you can identify the one
employee very quickly and changes are ex post comprehensible, too.
78
82
90
Backup of formulas without knowledge of PLC
article:
Art. ID.
9855
name
price
PG-2000 STEP5 complete package single license
STL + LAD + CFS
9855-3 PG-2000 STEP5 complete package company lic.
STL + LAD + CFS
9855-2 PG-2000 STEP5 complete package subsequent lic.
STL + LAD + CFS
9890
PG-2000 STEP5 complete package school license
STL + LAD + CFS
options:
Art. ID.
9851-CTR
name
price
91
87
89
PG-2000 option Controller single license
comfortable Projekt / History - administration
9851-CTR-3 PG-2000 option Controller company license
comfortable Projekt / History - administration
9856
PG-2000 option Datalogger single license
linewriter for the PLC
9856-3
PG-2000 option Datalogger company license
linewriter for the PLC
9856-2
PG-2000 option Datalogger subsequent license
linewriter for the PLC
9851-DB
PG-2000 option DB - Backup single license
automatic Backup / Restore of DB's
9851-DB-3 PG-2000 option DB - Backup company license
automatic Backup / Restore of DB's
9851-DB-2 PG-2000 option DB - Backup subsequent license
automatic Backup / Restore of DB's
9858
PG-2000 option H1 single license
programming over Network-adapter
9858-3
PG-2000 option H1 company license
programming over Network-adapter
9858-2
PG-2000 option H1 subsequent license
programming over Network-adapter
9851-TS
PG-2000 option Teleservice single license
original TS-function for PG-2000
9851-TS-3
PG-2000 option Teleservice company license
original TS-function for PG-2000
9851-TS-2
PG-2000 option Teleservice subsequent license
original TS-function for PG-2000
STEP5
/ STEP7
Visualisierung
programming
/-OPC-Server
Zubehör
SPS
- Kommunikationstreiber
9851-CTR-2 PG-2000 option Controller subsequent license
comfortable Projekt / History - administration
79
89
91
87
Driver for S7- / S5- / AEG- / BOSCH- and MITSUBISHI-controll systems
operating systems: Windows CE/NT/2000/XP/Vista, Linux
programming languages: C/C+, C#, VB, VB.NET, Delphi, LabView, Excel, Access, PHP, Java
Communication to PLC-devices, but no knowledge of the specific
protocoles
Visualisierung
/ OPC-Server
Zubehör
PLC - communication
driver
80
86
88
96
92
90
Who know´s the problem, you need for the analysis of your production
some data from the plc, but you don´t know the protocole of the PLC? No
problem, you have to use the specific protocole of the PLC as DLL in your
application ( if itself developed or Excel, Access, ans so on) and you will
be able to read from or write to the PLC.
Driver for the communication with S7-controll systems
operating systems: Windows CE/NT/2000/XP/Vista, Linux
no additional PLC-program necessary
inputs, outputs, flags, DB's, timers, counters
programming languages: C/C+, C#, VB, VB.NET, Delphi, LabView, Excel, Access, PHP, Java
DLL/library for data exchange PC and SIMATIC S7
article:
Art. ID.
name
9742.LIN-P
IP-S7-LINK LINUX single license
for the operating system Linux
9742.LIN
IP-S7-LINK LINUX company license
for the operating system Linux
9742.64-S7-P
IP-S7-LINK S7-200/300/400/1200 single license
XP/Vista/Windows 7 64-Bit
9742.32-S7
IP-S7-LINK S7-200/300/400/1200 company license
Win95/98/NT/2000/XP/Vista/Windows 7 32-Bit
9742.64-S7
IP-S7-LINK S7-200/300/400/1200 company license
XP/Vista/Windows 7 64-Bit
9742.32-S7-P
IP-S7-LINK S7-200/300/400/1200 single license
Win95/98/NT/2000/XP/Vista/Windows 7 32-Bit
9759-S7
IP-driver for S7-LAN Windows DLL company license
Win95/98/NT/2000/XP/Vista
9749.32-P
PC-MPI-S7-LINK S7-200/300/400 single license
Win95/98/NT/2000/XP/Vista
9749.LIN-P
PC-MPI-S7-LINK S7-200/300/400 single license
LINUX
9749.32
PC-MPI-S7-LINK S7-200/300/400 company lic.
Win95/98/NT/2000/XP/Vista
9749.LIN
PC-MPI-S7-LINK S7-200/300/400 company lic.
LINUX
9749.32-L
PC-MPI-S7-LINK S7-200/300/400 school license
Win95/98/NT/2000/XP/Vista
9749.32-S
PC-MPI-S7-LINK S7-200/300/400 Sourcecode
Win95/98/NT/2000/XP/Vista
price
article:
Art. ID.
name
9742-PHP-WIN.P
PHP-Interface for IP-S7-Link single license
for Windows
9742-PHP-WIN
PHP-Interface for IP-S7-Link company license
for Windows
9742-PHP-LIN.P
PHP-Interface for IP-S7-Link single license
for LINUX
9742-PHP-LIN
PHP-Interface for IP-S7-Link company license
for LINUX
9742.32-S7R-P
Routing to all PLC single license
via CP to MPI and Profibus
price
9742.32-S7R.LIN-P Routing to all PLC single license
via CP to MPI and Profibus
9742.32-S7R
Routing to all PLC company license
via CP to MPI and Profibus
9742.32-S7R.LIN
Routing to all PLC company license
via CP to MPI and Profibus
operating systems: Windows CE/NT/2000/XP/Vista, Linux
programming languages: C/C+, C#, VB, VB.NET, Delphi, LabView, Excel, Access, PHP, Java
PLCs: Siemens S5, VIPA
article:
Art. ID.
name
9742.32-H1-P
IP-H1-LINK for H1/TCP/IP single license
Win95/98/NT/2000/XP/Vista
9742.32-H1
IP-H1-LINK for H1/TCP/IP company license
Win95/98/NT/2000/XP/Vista
9759-S5
IP-driver for S5-LAN Windows DLL company license
Win95/98/NT/2000/XP/Vista
9742.32-VP-P
IP-VIPA-LINK for VIPA TCP/IP CP's single license
Win95/98/NT/2000/XP/Vista
9742.32-VP
IP-VIPA-LINK for VIPA TCP/IP CP's company license
Win95/98/NT/2000/XP/Vista
9748.32-P
PC-H1-LINK single license
H1-access for standard-Ethernetcard for Win95/98/NT/2000/XP/Vista
9748.32
PC-H1-LINK company license
H1-access for standard-Ethernetcard for Win95/98/NT/2000/XP/Vista
9748.32-S
PC-H1-LINK Sourcecode
H1-access for standard-Ethernetcard for Win95/98/NT/2000/XP/Vista
9741-32
PC-R3964R-LINK protocol RK512 company license
Win95/98/NT/2000/XP/Vista
9741-S-32
PC-R3964R-LINK protocol RK512 Sourcecode
Win95/98/NT/2000/XP/Vista
9745-P
PC-S5-LINK PG-BUS-AS511 single license
up to 30 PLC's to 1 COM for Win95/98/NT/2000/XP/Vista
9745
PC-S5-LINK PG-BUS-AS511 company license
up to 30 PLC's to 1 COM for Win95/98/NT/2000/XP/Vista
9747-P
PC-S5-LINK-AS511 single license
1 PLC to 1 COM for Win95/98/NT/2000/XP/Vista
9747
PC-S5-LINK-AS511 company license
1 PLC to 1 COM for Win95/98/NT/2000/XP/Vista
9894
PC-S5-LINK-AS511 school license
1 PLC to 1 COM for Win95/98/NT/2000/XP/Vista
9747-S
PC-S5-LINK-AS511 Sourcecode
1 PLC to 1 COM for Win95/98/NT/2000/XP/Vista
price
Zubehör
SPS
PLC--Kommunikationstreiber
communication
driver
Driver for the communication with S5-controll systems
9759-S5-PHP-WIN PHP-Interface for S5-LAN-LINK company license
for Windows
9759-S5-PHP-LIN PHP-Interface for S5-LAN-LINK company license
for LINUX
81
91
Driver for the communication with AEG-controll systems
operating systems: Windows CE/NT/2000/XP/Vista, Linux
programming languages: C/C+, C#, VB, VB.NET, Delphi, LabView, Excel, Access, PHP, Java
PLC's: A120, A250
article:
Art. ID.
9740.AEG-32
name
price
PC-AEG-LINK company license
Protocol KS-functions (A120, A250) for Win 95/98/NT/2000/XP/Vista
9740-S.AEG-32 PC-AEG-LINK Sourcecode
Protocol KS-functions (A120, A250) for Win 95/98/NT/2000/XP/Vista
Driver for the communication with BOSCH-controll systems
operating systems: Windows CE/NT/2000/XP/Vista, Linux
programming languages: C/C+, C#, VB, VB.NET, Delphi, LabView, Excel, Access, PHP, Java
PLC's: BUEP19/BUEP19E
Visualisierung
/ OPC-Server
Zubehör
PLC - communication
driver
article:
Art. ID.
name
9749.BO-P
IP-Bosch-LINK single license
Protocol BUEP19/BUEP19E for Win95/98/NT/2000/XP/Vista
9749.BO
IP-Bosch-LINK company license
Protocol BUEP19/BUEP19E for Win95/98/NT/2000/XP/Vista
price
9749.BO-Linux IP-Bosch-LINK Linux
Protocol BUEP19/BUEP19E for Win95/98/NT/2000/XP/Vista
9743-32
PC-Bosch-LINK company license
Protocol BUEP19/BUEP19E for Win95/98/NT/2000/XP/Vista
9743-S-32
PC-Bosch-LINK Sourcecode
Protocol BUEP19/BUEP19E for Win95/98/NT/2000/XP/Vista
Driver for the communication with Mitsubishi/Melsec-controll systems
operating systems: Windows CE/NT/2000/XP/Vista, Linux
programming languages: C/C+, C#, VB, VB.NET, Delphi, LabView, Excel, Access, PHP, Java
PLC’s: A-/Q-/FX-series
article:
Art. ID.
name
9744-32-QJ
PC-Melsec System-QJ-LINK TCP/IP single license
QJ71E71-100 serial for Win95/98/NT/2000/XP/Vista
9744-S-32-QJ
PC-Melsec System-QJ-LINK TCP/IP company license
QJ71E71-100 serial for Win95/98/NT/2000/XP/Vista
9744-32-QR2
PC-Melsec System-QR2-LINK serial single license
QJ71E71-100 serial for Win95/98/NT/2000/XP/Vista
9744-S-32-QR2 PC-Melsec System-QR2-LINK serial company license
QJ71E71-100 serial for Win95/98/NT/2000/XP/Vista
82
98
86
88
96
90
92
9744-32
PC-Mitsubishi-LINK company license
Win95/98/NT/2000/XP/Vista
9744-S-32
PC-Mitsubishi-LINK Sourcecode
Win95/98/NT/2000/XP/Vista
price
simple and comfortable visualisation / data recall by OPC-Server
Data exchange between OPC-Clients and PLC’s
OPC-Clients due to specification 1.0 / 2.0
protocols: MPI on S7-300/400, PPI on S7-200
clearly arranged listing of links with status display
four serial ports (COM1 – COM4)
low CPU stress
article:
name
9769-23
OPC 3964R
with RK512 serial
9769-24
OPC 3964R
with RK512 TCP/IP with 3964R LAN
9760-10
OPC AEG 120/250 KS-Fct. on TCP
9760-002
OPC E-Mail Client / Server
9760-09
OPC Klöckner Moeller on TCP
9760-19
OPC Modbus Slave seriell on TCP
9760-022
OPC S5 H1 on ISO
9760-003
OPC SMS/Pager/Voicemail
9760-012
OPC WAGO on TCP
Single license
9760-004
OPC XML-DA-package
9760-001
OPC-data base connection
9760-110
OPC-Manager (like 9760-100)
company license per protocol
9760
OPC-Manager lite
9760-100
OPC-Manager S7 TCP/IP RFC1006
+ OPC S7 MPI/PPI
+ OPC S7 PPI S7-200
+ OPC S5 AS511 serial
+ OPC S5 H1 on TCP
9760-100-USB-N USB-Dongle for OPC-Manager
past licensing
9760-100-USB
price
Visualisation
/ OPC - Server
Zubehör
Art. ID.
USB-Dongle for OPC-Manager
at licensing
83
99
article:
Art. ID.
V9500-1B
name
Victory Boxed Release 5
1.000 variables
V9500-005 BVictory Boxed Release 5
50 variables
V9500-01 B Victory Boxed Release 5
100 variables
V9500-02 B Victory Boxed Release 5
200 variables
V9500-05 B Victory Boxed Release 5
500 variables
V9500-5 B
Victory Boxed Release 5
5.000 variables
V9500-10 B Victory Boxed Release 5
10.000 variables
Visualisation / OPC - Server
84
V9500-20 B Victory Boxed Release 5
20.000 variables
V9500-N B
Victory Boxed Release 5
unlimited variables
price
Visualisation of your company and your machines’ process run
32-bit visualisation with multiprocessor support
unlimited number of variables -> unlimited number of I/O
Victory is working with following data types: value, text and array (field)
the text length and array depth is not limited
each module driver is an independent COM/DCOM-Server, therefore immediately network-compatible
the cycle program uses the process programming language CPL, which is ajar to the syntax of C / C++
programming takes place in a modern programming environment and offers several features, which are
enormously helpful during processing and in the test phase
message processing is an inherent part of the Victory’s quintessence and is also used for own reporting
completely new and enormous improved graphic engine
integrated ODBC connection, HTTP-Server, E-Mail-Client, SMS/Pager/VoiceMail-services
user management is based on user groups and their assigned activities
article:
name
Victory Release 5 PLC-driver
Siemens S5 protocols
V9530-S7
Victory Release 5 PLC-driver
Siemens S7 protocols
V9533-1
Victory Release 5 PLC-driver
AEG Modicon
AEG A120 / A250
V9537-1
Victory Release 5 PLC-driver
Victory4/WinLab/easyware
Victory4 Netfile
V9538-1
Victory Release 5 PLC-driver
SAIA & Burgess
SAIA PLC via S-Comm
V9539-1
Victory Release 5 PLC-driver
General protocols
MODBUS Server serial l+TCP/IP
V9536-1
Victory Release 5 PLC-driver EPIS
EPIS EMD-series
V9532-1
Victory Release 5 PLC-driver Hilscher
Profibus DP (for card CIF-50 PB)
V9534-1
Victory Release 5 PLC-driver IBH
IBH softec SoftPLC
V9531-2
Victory Release 5 PLC-driver Moeller
Moeller PS4/PS416
V9535-1
Victory Release 5 PLC-driver WAGO
WAGO Ethernet TCP/IP FPC
V9500-1
Victory Release 5 developer licenses
1.000 variables
V9500-20
Victory Release 5 developer licenses
20.000 variables
V9500-N
Victory Release 5 developer licenses
unlimited variables
V9510-5
Victory Release 5 option dialogue/reporter
V9510-1
Victory Release 5 option recorder
V9510-4
Victory Release 5 option switching time planer
V9510-6
Victory Release 5 option touchscreen input
price
Visualisation / OPC - Server
Art. ID.
V9530-S5
V9599-HTTP Victory Release 5 HTTP-Runtime licenses
for each HTTP-Client
V9599-02
Victory Release 5 Runtime licenses
200 variables
V9599-1
Victory Release 5 Runtime licenses
1.000 variables
V9599-5
Victory Release 5 Runtime licenses
5.000 variables
V9599-10
Victory Release 5 Runtime licenses
10.000 variables
V9599-20
Victory Release 5 Runtime licenses
20.000 variables
V9599-N
Victory Release 5 Runtime licenses
20.000+ variables
V9500-MT
Victory Release 5 maintenance service 12months
per developer license
85
Here you will find everything you need on our products
Connecting cable CP with a S5-PLC
connects the PG socket of the S5-PLC with the PG socket of the CP
to program the S5 PLC via the CP
15pin D-Sub connector - 15pin D-Sub connector
length: 60cm
article:
Art. ID.
name
price
9359.AFmonkey-swing
PD-interface CP <=> PD-interface PLC (needed with H1, L1 or L2-bus)
Connect a Allen-Bradley controller with the PC
Accessories
Connecting your Allen-Bradley controller to the PC
9pol D-Sub-jack - 9pol D-Sub-jack
length: 3 m
article:
Art. ID.
name
price
9359.AB PLC-connecting cable
PC <-> Allen-Bradley
Communication & programming of a AG150 controller
the AG150 adapter is an additional adapter to the PG-Uni, PG-Uni-II or S5-LAN
AG150 adapter only in conjunction with a Netz adapter used
bolts and slide lock for fixing
15pin (female) - 25pin (female)
length: 10 cm
article:
Art. ID.
name
price
9359-5-150AG-150-adapter
for PG-UNI + PG-UNI-II-cable to AG-150
variant:
Art. ID.
name
price
9359-5-150-USB PG-USB AG-150-adapter
for PG-USB-cable to AG-150
accessories:
Art. ID.
9359-4 NETZ-adapter
for PG-UNI-cable /UNI-II-cable/S5-LAN
86
name
price
Communication & programming of a AG150 controller
the AG150-adapter is an additional adapter to the PG-USB
bolts and slide lock for fixing
15pin (female) - 25pin (female)
length: 10 cm
article:
Art. ID.
name
price
9359-5-150-USB PG-USB AG-150-adapter
for PG-USB-cable to AG-150
variant:
Art. ID.
name
price
9359-5-150AG-150-adapter
for PG-UNI + PG-UNI-II-cable to AG-150
Connecting the analogue PCMCIA modem to the telephone socket
plug for PCMCIA-modem card connection
TAE plug for the phone jack in Germany/USA
3m long cable
Art. ID.
name
price
9381.KABEL Analogue cable for TAE-modem PCMCIA
PCMCIA-modemcard connection <=> TAE plug Germany/USA (spare part)
for DIN-rail-holder
Accessories
article:
fast and easy mounting on DIN rail
mounting kit is made of metal
scope of supply: 2 x mounting brackets + 2 x screws
article:
Art. ID.
name
price
9391-MT Mounting set
for DIN-rail-holder
87
Connection of a Profibus node to the bus line
cable connection via compression fitting technique
integrated switchable terminating resistors
different cable diameter useable
one-screw mounting system
inside screened housing
90° cable outlet
Technical Specifications:
Configuration:
Switch for bus termination (ON/OFF)
Interfaces:
to the PLC:
PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
to the PD/PC:
PD/diagnosis jack
Operating temperature:
5 - 55°C
Case:
ABS-plastic case
Dimensions:
65 x 43 x 17 mm
article:
Art. ID.
name
price
9350-9-CHP CheapConn Busconnector
for PROFIBUS
accessories:
Art. ID.
name
price
9350-9-CHP-K Connecting cable MPIx to CheapConn
9-pins 1 : 1 plated-through with shield
Accessories
serial adapter 9pol -> 25pol
9pins (male) - 25pins (female)
4 screws for mounting
dimensions: 65 x 55 x 15 mm
article:
Art. ID.
name
price
9359-9 Adapter COM 1 : COM2
9pins (male) - 25pins (female)
serial adapter 25pins -> 9pins
25pins (male) - 9pins (female)
4 screws for mounting
dimensions: 65 x 55 x 15 mm
article:
Art. ID.
9359-9.M Adapter COM 1 : COM2
25pins (male) - 9pins (female)
88
name
price
Programming of a CP525
the CP525-adapter is an additional adapter to the PG-Uni, PG-Uni-II
connection to the programming port of the CP525
bolts and slide lock for fixing
15pin (female) - 25pin (male)
length: 10 cm
article:
Art. ID.
name
price
9359-5CP-525-adapter
for PG-UNI + PG-UNI-II-cable <-> CP-525
variant:
Art. ID.
name
price
9359-5-USB PG-USB CP-525-adapter
for PG-USB-cable to CP-525
Programming of a CP525
the CP525-adapter is an additional adapter to the PG-USB
connection to the programming port of the CP525
bolts and slide lock for fixing
15pin (female) - 25pin (male)
length: 10 cm
name
price
9359-5-USB PG-USB CP-525-adapter
for PG-USB-cable to CP-525
variant:
Art. ID.
name
price
9359-5CP-525-adapter
for PG-UNI + PG-UNI-II-cable <-> CP-525
Accessories
article:
Art. ID.
Communication with a CP525
the CP525-adapter is an additional adapter to the PG-Uni, PG-Uni-II
connection to the communication port of the CP525
this adapter is also suitable for a CP524 and SA523/525
bolts and slide lock for fixing
15pin (female) - 25pin (male)
length: 10 cm
article:
Art. ID.
name
price
9359-5KCP-525-K-adapter
for PG-UNI + PG-UNI-II-cable <-> CP-525-communication
variant:
Art. ID.
name
price
9359-5K-USB PG-USB CP-525-K-adapter
for PG-USB-cable to CP-525-communication
89
Communication with a CP525
the CP525-adapter is an additional adapter to the PG-USB
connection to the communication port of the CP525
this adapter is also suitable for a CP524 and SA523/525
bolts and slide lock for fixing
15pin (female) - 25pin (male)
length: 10 cm
article:
Art. ID.
name
price
9359-5K-USB PG-USB CP-525-K-adapter
for PG-USB-cable to CP-525-communication
variant:
Art. ID.
name
price
9359-5KCP-525-K-adapter
for PG-UNI + PG-UNI-II-cable <-> CP-525-communication
Network cable crossed connected through
connect two ethernet devices directly
foil shielded twisted pair cable
with bend protection at the plug endings
RJ45 plug - R45 plug
pinout for EIA/TIA 56813
length: 3m
Accessories
article:
Art. ID.
name
price
9636-CROSS Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning
variant:
Art. ID.
name
price
9636-TCPIP.02M Patch-cable 0.25m, Cat5e, shielded
RJ45 plug <=> RJ45 plug, 1:1
9636-TCPIP
Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1
reception of DCF-signals
15pol plug for the connection to the SPS-Clock or the DCF-Verstärker
for reception of DCF-77-signals
dimensions: 75 x 70 x 55 mm
length: 5m
article:
Art. ID.
9366
90
name
DCF-77-antenna
cable length 5m for connecting to SPS-Clock
price
Prepares your weak or not clean DCF signals
signal preparing in low DCF reception
LED to indicate whether a DCF signal is detected
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
1 watt
Display:
LED for displaying incoming DCF-signals and power
Interfaces:
15pin D-Sub jack for the DCF-antenna
15pin D-Sub plug for the SPS-Clock
2pin Phönixjack for power supply
Operating temperature:
5 - 55°C
Case:
metal case with mounting flange
Dimensions:
95 x 35 x 135 mm
article:
Art. ID.
name
price
9366-1 Amplifier for DCF-antenna
processing of the DCF-77-signal for longer distances between antenna and SPS-Clock
options:
Art. ID.
name
price
DCF-77-antenna
cable length 5m for connecting to SPS-Clock
Replaces the defective lamp of LG07
article:
Art. ID.
name
price
9363-3-LAMPE Replacement lamp for LG-07
UV-tube with G23-plug
Accessories
9366
Replaces the defective lamp of UVL3
article:
Art. ID.
name
price
9363-4-LAMPE Replacement lamp for UVL3
UV-tube with G4T5-plug
Simple and quik mounting of MPI cables on the DIN-rail
fast and easy mounting on DIN rail
mounting kit is made of black metal
scope of supply: 1 x bracket for MPI cable + 2 x screws
article:
Art. ID.
name
price
9391-HH DIN-rail-holder for MPI/PPI
quick and easy assembling on the cap rail
variant:
Art. ID.
9350-WAND Wall-mounting
for MPI/PPI + MPI-II + MPI-USB
name
price
91
Connecting the iBx-Klemme with the PLC
15pol jack for the PD side
15pol plug for the AG side
both sides with plastic cases
dimensions of the plastic cases: 45 x 40 x 15 mm
in the variants 1 x 45° cable outlet / 2 x 45° cable outlet
article:
Art. ID.
9530-9S
name
price
iBx-SPS-cable to PLC 3m
one side angled, other side straight cable tap
9530-9WS iBx-SPS-cable to PLC 3m
bothside 45° angle
Full ISDN functionality for traditional analogue terminals
easy installation and automatic recognition of dialling procedure used (pulse dialling, tone dialling)
can be directly connected to an ISDN multiple device port or to a PABX
free internal calls between connected telephones
supports keypad-functions
full ISDN functionality provided, e.g. call waiting, 3-party conference and toggling
2 external calls can be made simultaneously
3 numbers (MSN) per analogue port can be configured (up to 6 MSNs possible)
display of caller's telephone number (CLIP) and reception of SMS messages (FSK-Verfahren) are possible on suitable telephones
Technical Specifications:
Accessories
Supply voltage:
via an AC adapter 230V/AC 50Hz
Interfaces:
1 x ISDN Basic Rate Access (DSS1)
2 x ports for analogue terminals (coding U / F)
1 x port for analogue terminal (coding N) for additional devices
dialling:
pulse or tone
Case:
plastic case for table operation or wall mounting
Dimensions:
180 x 140 x 45 mm
article:
Art. ID.
name
9370-ISDN ISDN-adapter for analogue terminals
full ISDN-functionality e.g. call waiting, 3-way conferencing, broker's call
Connect the differential line with fiber optic technology (fiberglass cable)
extend and connect the differential transmission line with fiberglass cable
fail-safe by insensitivity to electromagnetic fields
no sparks through cable breakage or separation
no crosstalk possible
lightning protection guaranteed
transfer of TxD and RxD
Technical Specifications:
92
Supply voltage:
24V/DC +/- 20%
Power consumption:
1,5 watt
Interfaces:
2 x screw terminal for power supply
4 x screw terminal for differential transmission (RxD and TxD)
2 x socket for F-SMA fiber optic connector
Maximum connection length:
2,5 km
Operating temperature:
5 - 55°C
Case:
powder coated metal case with mounting flange
Dimensions:
75 x 65 x 30 mm
price
article:
Art. ID.
name
price
9531-G Light wire-adapter
for glasfibre-cables
variant:
Art. ID.
name
price
9531-K Light wire-adapter
for plasticfibre-cables
9532-K Light wire-adapter
RS232 for plasticfibre-cables
accessories:
Art. ID.
name
price
9391.1 24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
Connect the differential line with fiber optic technology (plastic cable)
extend and connect the differential transmission line with plastic cable
fail-safe by insensitivity to electromagnetic fields
no sparks through cable breakage or separation
no crosstalk possible
lightning protection guaranteed
transfer of TxD and RxD
Supply voltage:
24V/DC +/- 20%
Power consumption:
1,5 watt
Interfaces:
2 x screw terminal for power supply
4 x screw terminal for differential transmission (RxD and TxD)
2 x socket for duplex connectors with or without locking
Maximum connection length:
145 m
Operating temperature:
5 - 55°C
Case:
powder coated metal case with mounting flange
Dimensions:
75 x 65 x 30 mm
Accessories
Technical Specifications:
article:
Art. ID.
name
price
9531-K Light wire-adapter
for plasticfibre-cables
variant:
Art. ID.
name
price
9531-G Light wire-adapter
for glasfibre-cables
9532-K Light wire-adapter
RS232 for plasticfibre-cables
accessories:
Art. ID.
name
price
9391.1 24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
93
Connect the RS232 line with fiber optic technology
extend and connect the RS232 transmission line with plastic cable
fail-safe by insensitivity to electromagnetic fields
no sparks through cable breakage or separation
no crosstalk possible
lightning protection guaranteed
transfer of TxD and RxD
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
1,5 watt
Interfaces:
3 x screw terminal for power supply and PE
3 x screw terminal for RS232 transmission (RxD, TxD, GND)
2 x socket for duplex connectors with or without locking
Maximum connection length:
145 m
Operating temperature:
5 - 55°C
Case:
powder coated metal case with mounting flange
Dimensions:
75 x 65 x 30 mm
article:
Art. ID.
name
price
9532-K Light wire-adapter
RS232 for plasticfibre-cables
variant:
Art. ID.
name
price
9531-K Light wire-adapter
for plasticfibre-cables
Accessories
9531-G Light wire-adapter
for glasfibre-cables
accessories:
Art. ID.
name
price
9391.1 24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
Antenna for the reception with the S7-Bridge
screw on the connector GSM/FME(f) to the S7-WLAN-Bridge
water-proof IP65
magnetic base (3x neodyn magnet) for mounting on the cabinet, etc.
length of the cable (RG174): 3m
dimensions: ca. 70 x 15 mm, cable diameter: 2,7mm
article:
Art. ID.
name
price
9352-S7-WLAN-Bridge-ANT Magnetic base antenna for S7-WLAN-Bridge, WLAN-Klemme
cable length: 3m
Antenna for the reception with the GSM modem
screw on the connector to the modem
magnetic base for mounting on the cabinet, etc.
length of the cable: 2,5m
dimensions: 70 x 30 x 30 mm
article:
Art. ID.
9379-ANT Magnetic base antenna
for TP, TS + MPI-Modem
94
name
price
connecting your S7 with an additional subscriber / device
9pol (male) - 9pol (male)
4 screws for mounting
dimensions of the plug: 50 x 35 x 15 mm
length: 1m
article:
Art. ID.
name
price
9379.1 MPI-/Profibus connecting cable 1m
connects MPI-modem/TP-II with the S7-PLC
connecting your S7 with an additional subscriber / device
9pol (male) - 9pol (male)
4 screws for mounting
dimensions of the plug: 30 x 30 x 13 mm
length: 1m
article:
Art. ID.
name
price
Accessories
9377.1 MPI-/Profibus connecting cable 1m
for Tele-Service
Power adapter for MPI-cable
generates a 24V power supply for the MPI cable
allows a 2-wire connection to the PLC
voltage is not on the PLC side
the rest is connected through 1 : 1
Technical Specifications:
Supply voltage:
100 - 240 V/AC, 50 - 60 Hz
Output voltage:
24 V/DC
Power supply:
15 watt
Interfaces:
to the PLC:
9 pol. plug for AG-connection
to the PD/PC:
9 pol. jack for PD-connection
Operating temperature:
5 - 40°C
Case:
grey plastic case
Dimensions:
65 x 35 x 15 mm
article:
Art. ID.
name
price
9350-4 Power-adapter for MPI-cable
with power-supply unit 100-240VAC
variant:
Art. ID.
name
price
9350-4-ON Power-adapter for MPI-cable
without power-supply unit
95
Power adapter for MPI-cable
generates a 24V power supply for the MPI cable
allows a 2-wire connection to the PLC
voltage is not on the PLC side
the rest is connected through 1 : 1
Technical Specifications:
Supply voltage:
24 V/DC
Output voltage:
24 V/DC
Power supply:
depending on your voltage source
Interfaces:
to the PLC:
9 pol. plug for AG-connection
to the PD/PC:
9 pol. jack for PD-connection
Operating temperature:
5 - 40°C
Case:
grey plastic case
Dimensions:
65 x 35 x 15 mm
article:
Art. ID.
name
price
9350-4-ON Power-adapter for MPI-cable
without power-supply unit
variant:
Art. ID.
name
price
9350-4 Power-adapter for MPI-cable
with power-supply unit 100-240VAC
Accessories
accessories:
Art. ID.
name
price
9391.1 24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
Generats own current sources
generates new current sources for the communication
operation area: damaged current sources, not existing current sources, sanded current sources, passiv interfaces, ...
external power supply
Technical Specifications:
Supply voltage:
24V/DC +/- 20%
Power consumption:
1 watt
Interfaces:
2 x TTY/20mA current loop (1 x 15pol plug / 1 x 15pol jack)
Operating temperature:
5 - 55°C
Case:
plastic case
Dimensions:
50 x 45 x 15 mm
article:
Art. ID.
name
9359-4 NETZ-adapter
for PG-UNI-cable /UNI-II-cable/S5-LAN
Conenction from PC to PC
Ideal for connecting PC to PC
for other applications suited as well by the crossed contact
TXD -> RXD / RXD -> TXD
9pol D-Sub-jack - 9pol D-Sub-jack
length: 3 m
96
price
article:
Art. ID.
name
price
9359.0 Null-modem-cable 9-pin D-SUB
D-SUB 9pins (female) <=> D-Sub 9pins (female), rotated assignment (null modem)
variant:
Art. ID.
name
price
9359.1:1 1:1 cable 9pins D-SUB
D-SUB 9pins (male) <=> D-Sub 9pins (female), 1to1-assignment
Connect a Siemens Panal with a PC
connect a Siemens Panal (15pin RS232 interface) with a PC
screws and slide lock for fixing
15pin (male) - 9pin (female)
length: 3 m
article:
Art. ID.
name
price
9359.OP OP-Programming cable to PC 3m
serial progamming cable for panels; D-Sub 9pins (female) <=> 15pins (male)
connect your CheapConn with one of our MPI cable for parallel programming on the bus
plug in with simple and mix-up-proof standardized connectors to the MPI cable
consisting of the CheapConn connection cable and a CheapConn
fully assembled and ready for mounting on the MPI cable
9-pin 1 : 1 plated-through
screen connected through
length: 0.5 m
article:
Art. ID.
name
price
9350-9-CHP-CC Option CheapConn for MPI
9350-9-CHP+9350-9-CHP-K already mounted
Accessories
Parallel connection of a MPI cable on the bus
accessories:
Art. ID.
9350-9-CHP
name
price
CheapConn Busconnector
for PROFIBUS
9350-9-CHP-K Connecting cable MPIx to CheapConn
9-pins 1 : 1 plated-through with shield
Network cable 1 : 1 connected through
connect your ethernet device with a HUB/Switch or a wall plate
foil shielded twisted pair cable
with bend protection at the plug endings
RJ45 plug - R45 plug
pinout for EIA/TIA 568
length: 3m
article:
Art. ID.
name
price
9636-TCPIP Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1
variant:
Art. ID.
9636-CROSS
name
price
Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning
9636-TCPIP.02M Patch-cable 0.25m, Cat5e, shielded
RJ45 plug <=> RJ45 plug, 1:1
97
Optimal for connecing the S7-Bridge to the S7-LAN
connect your S7-WLAN-Bridge with a S7-LAN on the shortest way
foil shielded twisted pair cable
with bend protection at the plug endings
RJ45 plug - R45 plug
pinout for EIA/TIA 568
length: 0,25m
article:
Art. ID.
name
price
9636-TCPIP.02M Patch-cable 0.25m, Cat5e, shielded
RJ45 plug <=> RJ45 plug, 1:1
variants:
Art. ID.
name
price
9636-CROSS Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning
9636-TCPIP
Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1
Provides PPI, MPI- and Profibus
Accessories
Card conforms to PC104-declaration (90.2 x 95.9mm)
Depending on the version 1 or 2 connector sockets for post-spring-bar for PPI, MPI and Profibus
Supports all baud rates up to 12M
PC104 bus through dual-Portet-Ram separate from actual hardware
PPI, MPI and PROFIBUS is electrically isolated from residual Hardware
Firmware is kept in the integrated flash-memory, therefore easier update possible
article:
Art. ID.
name
price
9352-104 MPI-PC104-card 1 channel up to 12Mbaud
equates to PC104-standard (90.2 x 95.9mm)
variant:
Art. ID.
name
price
9352-104-2 MPI-PC104-card 2 channel up to 12Mbaud
equates to PC104-standard (90.2 x 95.9mm)
Connection to the analog telephone network via PCMCIA
BZT-permission (D132754J / CTR21 / CEO560X)
transfer rate up to 56000 Bps vollduplex asynchron
AT-Hayes instruction set
getting an outgoing line with flash or number
MNP 2-4, V.42 / MNP 5, V.42bis
Analogue telefone lead included in delivery
communication-/fax-software included in delivery
Technical Specifications:
Power consumption:
250 mA
Interfaces:
1 x PCMCIA to PD/PC
1 x analogue connection
Specifications:
CCITT V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.fc, V.34, V.34+, K56flex
Case:
PCMCIA-format 2.0 type II
Dimensions:
85 x 55 x 5 mm
article:
Art. ID.
9381
name
price
TAE-modemPCMCIA-card for TELE-BOOK
pcmcia-card inclusive telefon-lead and TAE-adapter
options:
Art. ID.
98
name
9381.KABEL Analogue cable for TAE-modem PCMCIA
PCMCIA-modemcard connection <=> TAE plug Germany/USA (spare part)
price
galvanic separation up to 1000V
contact-protected plastic case
generates new current sources and a ne ground for the communication
galvanic separation between PC and PLC up to 1000V
power supply from the PLC
Technical Specifications:
Supply voltage:
5V/DC and/or 24V/DC +/- 20%
Power consumption:
1 watt
Interfaces:
2 x TTY/20mA current loop (1 x 15pol plug / 1 x 15pol jack)
Galvanic separation:
1000V PLC to the PC
Operating temperature:
5 - 55°C
Case:
plastic case
Dimensions:
50 x 45 x 15 mm
article:
Art. ID.
name
price
9359-8 PG-ISO-adapter
1000V galv. seperation
extend your PG-UNI-II cable on the PLC side up to 300m
all parts included except the connection cable
instructions and description of the pin configuration included
length is selectable arbitrarily / up to 300m
article:
Art. ID.
name
price
9359-7-II PG-UNI-II - lengthening set
Accessories
Lengthening of the PG-UNI-II cable up to 300m
Lengthening of the PG-UNI cable up to 300m
extend your PG-UNI cable on the PLC side up to 300m
all parts included except the connection cable
instructions and description of the pin configuration included
length is selectable arbitrarily / up to 300m
article:
Art. ID.
name
price
9359-7 PG-UNI - lengthening set
Lengthening of the PG-USB cable up to 100m
extend your PG-USB cable on the PLC side up to 100m
all parts included except the connection cable
instructions and description of the pin configuration included
length is selectable arbitrarily / up to 100m
article:
Art. ID.
name
price
9359-7-USB PG-USB-lengthening set
complete mounting set
99
Connction cable of a PG685 to a S5-PLC
15pin D-Sub PLC connectivity via 25-pin D-sub PG685
supply from the PLC over the 5V power supply
the transducer electronics are fully integrated in the cable
length: 3 m
article:
Art. ID.
name
price
9359-91 PG-685-cable 5m
replacement cable for PD-685 to S5-PLC, D-Sub 25pins (male) <=> D-Sub 15pins (male)
Writing on a Flash in the PLCC32 housing with the Multi-Prommer
with this adapter are also flashs in PLCC32 housing plugable in a dual inline socket
on the dual inline socket continue the usual pin order
with ejection mechanism of the PLCC32-socket
article:
Art. ID.
name
price
9363-13PLCC32-adapter
for MULTI-Prommer
Accessories
Starter Set for Prof-II remote maintenance
for a simple introduction to PLC remote maintenance
set consists 11 parts
Content:
power adapter 110 - 240V/AC -> 24V/DC
MPI- / Profibus cable
S5-cable
patch cable
cross cable
serial cable 9-pin
null modem cable
USB-cable A - A
USB-cable A - B
telephone cable ISDN
telephone cable analogue D/USA
article:
Art. ID.
9372
name
price
TELE-PROFessional II Starter-Kit
completing 9372-OEM
TTL <-> RS232 Converter-IC
replacement component for your PG-COM and PG-UNI
converts TTL signals to RS232
module in DIL20 housing
article:
Art. ID.
9359-MAX233 RS232 / V24 chip
for interfacecable
100
name
price
1:1 connecting cable for the S5-controller
15pol jack for the PD side
15pol plug for the AG side
both sides with plastic cases
dimensions of the plastic cases: 45 x 40 x 15 mm
in the variants 3m / 5m / 6m / 10m
article:
Art. ID.
9361-3
name
price
S5-connecting cable 3m
forTELE-PROF, MINI-/PG-MUX-II
9361-3.05M S5-connecting cable 5m
for TELE-PROF, MINI-/PG-MUX-II
9361-3.06M S5-connecting cable 6m
for TELE-PROF, MINI-/PG-MUX-II
9361-3.10M S5-connecting cable 10m
for TELE-PROF, MINI-/PG-MUX-II
Couples the PC (9 pol. COM-interface) with the RS485 interface port of the PLC
article:
Art. ID.
name
price
9359.M SC-09 cable 3m for Mitsubishi
RS232 <-> RS485
Serial COM-Port using a PCMCIA-card
Accessories
PLC connectivity via 25-pin D-sub or mini-DIN (special adapter)
supply from the PLC over the 5V power supply
the transducer electronics are fully integrated in the cable
length: 3 m
extend your device to a serial 9 pin interface
generats an RS232 interface from a PCMCIA interface
transfer rate up to 115.2 kbit/s
PCMCIA card is completely immersed in the device
dimensions: 85 x 55 x 5 mm
15 cm cable with 9-pin connector
article:
Art. ID.
name
price
9370-COM Serial PCMCIA-adapter
for TP + TB
Connecting serial devices
Ideal for connecting our serial devices to the PC
for other applications suited as well by the 1 : 1 contact
9pol D-Sub-plug - 9pol D-Sub-jack
length: 3 m
article:
Art. ID.
name
price
9359.1:1 1:1 cable 9pins D-SUB
D-SUB 9pins (male) <=> D-Sub 9pins (female), 1to1-assignment
variant:
Art. ID.
name
9359.0 Null-modem-cable 9-pin D-SUB
D-SUB 9pins (female) <=> D-Sub 9pins (female), rotated assignment (null modem)
price
101
spacious and robust servicebag
for the MINI-Prommer and FLASH-Prommer applicable
everything for the MINI-/FLASH-Prommer in one bag stowable
equipped with a handle for comfortable transport
robust zipper for opening and closing
washable surface
Technical Specifications:
Material:
rugged synthetic leather
Colour:
black
Attachment features:
1 x velcro strips for mounting the device
1 x rubber strap for the cables
1 x pocket for the manual / CDs / documentations / etc.
Dimensions:
200 x 175 x 65 mm
article:
Art. ID.
name
price
9363-6Servicebag
MINI-PROMMER + FLASH-PROMMER
spacious and robust servicebag
Accessories
for the MULTI-Prommer applicable
everything for the MULTI-Prommer in one bag stowable
equipped with a handle for comfortable transport
robust zipper for opening and closing
washable surface
Technical Specifications:
Material:
rugged synthetic leather
Colour:
black
Attachment features:
1 x velcro strips for mounting the device
1 x rubber strap for the cables
1 x pocket for the manual / CDs / documentations / etc.
Dimensions:
280 x 325 x 100 mm
article:
Art. ID.
name
price
9363-7Servicebag
for MULTI-PROMMER
spacious and robust servicebag
for the PG-MUX-II applicable
everything for the PG-MUX-II in one bag stowable
equipped with a handle for comfortable transport
robust zipper for opening and closing
washable surface
Technical Specifications:
Material:
rugged synthetic leather
Colour:
black
Attachment features:
1 x velcro strips for mounting the device
1 x rubber strap for the cables
1 x pocket for the manual / CDs / documentations / etc.
Dimensions:
265 x 260 x 55 mm
article:
Art. ID.
102
9361-6Servicebag
for PG-MUX-II
name
price
spacious and robust servicebag
for the TB, TP, TP-II applicable
everything for the TB, TP, TP-II in one bag stowable
equipped with a handle for comfortable transport
robust zipper for opening and closing
washable surface
Technical Specifications:
Material:
rugged synthetic leather
Colour:
black
Attachment features:
1 x velcro strips for mounting the device
3 x rubber strap for the cables
1 x pocket for the manual / CDs / documentations / etc.
Dimensions:
325 x 325 x 60 mm
article:
Art. ID.
name
price
9371-6Servicebag
for TP, TB + TP-II-FLAT
Communication & programming of a Sinumerik controller
article:
Art. ID.
name
price
9359-6 SINUM-adapter
for PG-UNI + PG-UNI-II-cable to SINUMERIK
variant:
Art. ID.
name
price
9359-6-USB PG-USB SINUM-adapter
for PG-USB-cable to SINUMERIK
Accessories
the Sinum-adapter is an additional adapter to the PG-Uni, PG-Uni-II or S5-LAN
this adapter can be used with a 805, 810, 820, 840, 850, 880
bolts and slide lock for fixing
15pin (female) - 25pin (male)
length: 10 cm
Communication & programming of a Sinumerik
the Sinum-adapter is an additional adapter to the PG-USB
this adapter can be used with a 805, 810, 820, 840, 850, 880
bolts and slide lock for fixing
15pin (female) - 25pin (male)
length: 10 cm
article:
Art. ID.
name
price
9359-6-USB PG-USB SINUM-adapter
for PG-USB-cable to SINUMERIK
variant:
Art. ID.
name
price
9359-6 SINUM-adapter
for PG-UNI + PG-UNI-II-cable to SINUMERIK
Connection between TP-devices without phone
Connects 2 TP-devices directly via a copper cable (phone-net not requiered)
Module suitable for direct switch control box wall mount
Supply of 24V DC
Dimension: 77 x 66 x 32mm
Used in pairs
article:
Art. ID.
9370-SLM Leased-line modem for TP
only usuable as pairs
name
price
103
Plug for voltage supply
Connector socket with 2 contacts
Cable connection with screw terminal
Locked with the jack with screws
Technical Specifications:
Number of positions:
2
Nominal voltage:
250 V (maximum)
Nominal current:
12 A (maximum)
Pitch:
5,08 mm
Stripping length:
7 mm
Inflammability class:
V0
article:
Art. ID.
name
price
9371-24 Power connector 2pins big
connector plug lockable by jack with screws
Plug for voltage supply
Connector socket with 2 contacts
Cable connection with screw terminal
Accessories
Technical Specifications:
Number of positions:
2
Nominal voltage:
160 V (maximum)
Nominal current:
8 A (maximum)
Pitch:
3,81 mm
Stripping length:
7 mm
Inflammability class:
V0
article:
Art. ID.
name
price
9352-24 Power connector 2pins small
cable coupling by screw-connector (small)
Plug for voltage supply
Connector socket with 3 contacts
Cable connection with screw terminal
Locked with the jack with screws
Technical Specifications:
Number of positions:
3
Nominal voltage:
250 V (maxmum)
Nominal current:
12 A (maximum)
Pitch:
5,08 mm
Stripping length:
7 mm
Inflammability class:
V0
article:
Art. ID.
104
9372-24 Power connector 3pins big
connector plug lockable by jack with screws
name
price
external power-source for our products
universal power adapter for all our products
power supply for a wide field of applications
recognizes and automatically adjusts itself to the applied voltage (100V - 240V)
Europe and USA plug included
Technical Specifications:
Supply voltage:
100 - 240 V/AC, 50 - 60 Hz
Output voltage:
24 V/DC
Power supply:
15 watt
Operating temperature:
5 - 40°C
Case:
black plastic case
Dimensions:
85 x 50 x 32 mm
article:
Art. ID.
name
price
9391.1 24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug
Junction box for installation on wall
article:
Art. ID.
name
price
9370-TAE TAE junction box
analogue telephone box (NFN) for on-wall mounting
Accessories
Junction box for analogue telephone signals
Coding NFF (message device - telephone - telephone)
Suitable for surface mounting
Connecting a CP with a TP or TB
is part of the H1, L1, L2 option for the TP and TB
connect the PG TTY interface of the TP and TB with the CP
slide lock for fixing
15-pin (male) - 15-pin (male)
length: 3 m
article:
Art. ID.
name
price
9359-90CP-cable
connects PD-TTY-port of TP-I, TP-II with L1,H1,L2-CP, D-Sub 15pins (male) <=> D-Sub 15pins (male)
worldwide use
content: 13 europeane modem-adapters
Koskin - (synthetic leather) organizer for quick reference
adapts modems to european destinations
easy-to-use country selection guide
convenient travel pouch holds a few adapters while you travel
dimensions of the Koskin-organizer: 255 x 195 x 50 mm
article:
Art. ID.
9370-SET Phone-connector-set 16parts
worldwide use
name
price
105
Connecting our products to the telephone network european wide
RJ11 plug for modem connection
Belgian plug for the phone jack in Belgium
3m long cable
article:
Art. ID.
name
price
9370-8-BE Special phone-cable for Belgium
RJ12 plug <=> telephone plug of Belgium
Connecting our products to the telephone network european wide
RJ11 plug for modem connection
TAE plug for the phone jack in Germany/USA
3m long cable
article:
Art. ID.
name
price
9370-8-D/USA Phone-cable analogue Germany+USA
RJ12 plug <=> RJ12 plug with TAE-adapter for Germany
Accessories
Connecting our products to the telephone network european wide
RJ11 plug for modem connection
Danish plug for the phone jack in Denmark
4,5m long cable
article:
Art. ID.
name
price
9370-8-DK Special phone-cable for Denmark
RJ12 plug <=> telephone plug of Denmark
Connecting our products to the telephone network european wide
RJ11 plug for modem connection
F010 plug for the phone jack in France
4,5m long cable
article:
Art. ID.
name
price
9370-8-FR Special phone-cable for France
RJ12 plug <=> telephone plug of France
Connecting our products to the telephone network european wide
RJ11 plug for modem connection
631A plug for the phone jack in Great Britain
3m long cable
article:
Art. ID.
106
9370-8-GB Special phone-cable for Great Britain
RJ12 plug <=> telephone plug of Great Britain
name
price
Connecting our products to ISDN
RJ45 connector - RJ45 connector
1 : 1 connected through
flatband cable black
3m long cable
article:
Art. ID.
name
price
9370-8-ISDN Phone-cable ISDN
RJ45 plug <=> RJ45 plug, assigned 1to1
Connecting our products to the telephone network european wide
RJ11 plug for modem connection
m.W. PTT DHZ doos plug for the phone jack in the Netherlands
4,5m long cable
article:
Art. ID.
name
price
Accessories
9370-8-NL Special phone-cable for Netherlands
RJ12 plug <=> telephone plug of the Netherlands
Connecting our products to the telephone network european wide
RJ11 plug for modem connection
Reichle plug for the phone jack in Switzerland
3m long cable
article:
Art. ID.
name
price
9370-8-CH Special phone-cable for Switzerland
RJ12 plug <=> telephone plug of Switzerland
Connecting our products to the telephone network european wide
RJ11 plug for modem connection
TDO plug for the phone jack in Austria
3m long cable
article:
Art. ID.
name
price
9370-8-AT Special phone-cable for Austria
RJ12 plug <=> telephone plug of Austria
107
Connecting a serial MPI cable to a modem
adapter makes a 9-pin plug of a 9-pin jack
simply adjust the MPI cable for TS function and add the adapter
pin assignment turned in the adapter
bolts and screws to fasten
screen connected through
length: 20 cm
article:
Art. ID.
name
price
9350-TS Adapter cable 9pins to modem
for TS-function
Connecting USB - devices with Type A connector
suitable for USB 1.1 / 2.0 up to 480 Mbps
connector type A to connector type A
length: 3m
article:
Art. ID.
name
price
9352.1 USB-cable plug/plug Type A-A 3m
USB 1.1 / 2.0 up to 480 MBit
variant:
Art. ID.
name
price
Accessories
9352.2 USB-cable plug/plug Type A-B 3m
USB 1.1 / 2.0 up to 480 MBit
9352.3 USB-cable plug/plug Type A-B-Mini 3m
USB 1.1 / 2.0 up to 480 MBit
Connecting USB - devices with Type B connector
suitable for USB 1.1 / 2.0 up to 480 Mbps
connector type A to connector type B
length: 3m
article:
Art. ID.
name
price
9352.2 USB-cable plug/plug Type A-B 3m
USB 1.1 / 2.0 up to 480 MBit
variant:
Art. ID.
name
price
9352.1 USB-cable plug/plug Type A-A 3m
USB 1.1 / 2.0 up to 480 MBit
9352.3 USB-cable plug/plug Type A-B-Mini 3m
USB 1.1 / 2.0 up to 480 MBit
Connecting USB - devices with a Mini B connector
suitable for USB 1.1 / 2.0 up to 480 Mbps
connector type A to connector type Mini-B
length: 3m
article:
Art. ID.
name
price
9352.3 USB-cable plug/plug Type A-B-Mini 3m
USB 1.1 / 2.0 up to 480 MBit
variants:
Art. ID.
9352.1 USB-cable plug/plug Type A-A 3m
USB 1.1 / 2.0 up to 480 MBit
108
9352.2 USB-cable plug/plug Type A-B 3m
USB 1.1 / 2.0 up to 480 MBit
name
price
Connecting a serial interface via a USB-Port
generates from a USB-Port a serial Port (9pol. COM-interface)
supports S5- and S7-interface parameter
drivers are included for Win 2000 / XP
free selectable COM-Port: COM1 – COM256
baud rate: 300 Bit/s – 115,2 KBit/s
dataflowcontrol: Xon/Xoff, RTS/CTS
several converters are simultaneously useable at one PC
complete electronics in the plug housing
cable length 3m
power supply from the USB interface
Technical Specifications:
Supply voltage:
5V/DC
Power consumption:
0,2 watt
Display:
2 status-LEDs for RXT/TXD
Interfaces:
to the PD/PC:
USB 1.1 cable type A
others:
RS232: 300 Bd - 115,2 KBd
Operating temperature:
5 - 55°C
Case:
metal case
Dimensions:
60 x 30 x 14 mm
article:
Art. ID.
name
price
Accessories
9359-1-RS232 USB-Serial-converter cable 3m
USB <=> RS-232
Level-converter for PLC-TTY-Port
Contact-protected plastic case
Generates from the PLC-TTY-port a RS232-port
Ideal for use with TELE-LINK units to connect a S7-PLC via S7 interface cable
Power supply from the PLC-TTY-port
article:
Art. ID.
name
price
9359-V24V24-adapter
generates a PLC-V24-interface out of the PLC-TTY-interface, ideal for Tele-Link and S5-Diag
Joining a CheapConn to an MPI cable for parallel connection on the bus
connect your CheapConn with one of our MPI cable for parallel programming on the bus
plug in with simple and mix-up-proof standardized connectors
9-pin 1 : 1 plated-through
screen connected through
length: 0.5 m
article:
Art. ID.
name
price
9350-9-CHP-K Connecting cable MPIx to CheapConn
9-pins 1 : 1 plated-through with shield
109
Simple and quik mounting of MPI cables at the wall
fast and easy mounting at the wall
mounting kit is made of plastic
scope of supply: 2 x cementing clip + 2 x screws + 2 x cable tie
article:
Art. ID.
name
price
9350-WAND Wall-mounting
for MPI/PPI + MPI-II + MPI-USB
variant:
Art. ID.
name
price
9391-HH DIN-rail-holder for MPI/PPI
quick and easy assembling on the cap rail
Communication & programming of a WF470
the WF470 adapter is an additional adapter to the PG-Uni, PG-Uni-II
WF470 adapter only in conjunction with a Netz adapter used
bolts and slide lock for fixing
15pin (female) - 25pin (female)
length: 10 cm
article:
Accessories
Art. ID.
name
price
9359-5-WF470WF-470-adapter
for PG-UNI + PG-UNI-II-cable to WF470
variant:
Art. ID.
name
price
9359-5-WF470-USB PG-USB WF-470-adapter
for PG-USB-cable to WF470
accessories:
Art. ID.
name
price
9359-4 NETZ-adapter
for PG-UNI-cable /UNI-II-cable/S5-LAN
Communication & programming of a WF470
the WF470-adapter is an additional adapter to the PG-USB
bolts and slide lock for fixing
15pin (female) - 25pin (female)
length: 10 cm
article:
Art. ID.
name
price
9359-5-WF470-USB PG-USB WF-470-adapter
for PG-USB-cable to WF470
variant:
Art. ID.
9359-5-WF470WF-470-adapter
for PG-UNI + PG-UNI-II-cable to WF470
110
name
price
SIMATIC, STEP, S7-200,
S7-300, S7-400 und CP 143
sind eingetragene Warenzeichen
der SIEMENS AG
master for copy
of your inquiry or order
___________________________________________
Your customer number
___________________________________________
__________________________________________________
Company
__________________________________________________
Contact
__________________________________________________
E-mail
__________________________________________________
VAT ID
__________________________________________________
Street
__________________________________________________
City
__________________________________________________
Country
__________________________________________________
Phone
__________________________________________________
Fax
__________________________________________________
Dispatch type
__________________________________________________
Notes
Your inquiry/order number
___________________________________________
Delivery date wanted
q Inquiry q Order
Pos. Qty
Order-No.
Article description
Single price €
Total price €
01
___________________________________________________________________________________________
02
___________________________________________________________________________________________
03
___________________________________________________________________________________________
04
___________________________________________________________________________________________
05
___________________________________________________________________________________________
06
___________________________________________________________________________________________
07
___________________________________________________________________________________________
08
___________________________________________________________________________________________
09
___________________________________________________________________________________________
10
___________________________________________________________________________________________
Prices in € + Packing + Transport + Insurance + VAT
_____________________________________
Date / Signature
Company stamp: